qulbix catalog november 2014

QULBIX CATALOG 2014

version 1

PAGE 1/30

4 X M6x12 BOLT

4 X M6 WASHER

MOTO SEAT

MOTO

SUBFRAMESEAT

5 riding configurations in 1 frame. Narrows the gap between motorcycles and bicycles.

Compatible with most high power hub motors on the market.

Compatible with standard bicycle components.

Large battery compartment enables high power battery pack installation.

Enclosed shell shaped frame offers best protection for the battery and extreme rigidity for off-road riding.

KEY ADVANTAGES:

QULBIX

Raptor 140 - Performance Electric Frame Kit

PAGE 2/30

OITP N

O

#3

#1

TIK EMARF ELC

YCI

B OITP N

O

#2

MOTO

FRAM

E K

IT

QULBIX RAPTOR 140FRAME KIT

5 OPTIONS IN 1 KIT

SH Y IEL LL DEK HTIW TI

K E

MA

RF EL

CY CI B

O FRT AO MM E KIT WITH

KELLY

SHIELD

O FT RAO MM E KIT WITH

FOO

T PEGS

BEST FOR: tracks, dirt trails; MX riding style; different cornering due to

fixed foot pegs position;

OITP N

O

#4

OITP N

O

#5

BEST FOR: tracks, dirt trails; MX riding style; increasing range by

pedaling.

BEST FOR: max. range; bicycle riding

style; workout;

PAGE 3/30

NEW GEOMETRY FEATURES: more ; padaling clearance larger (due to steering angle

narrower frame); larger inner ; battery volume larger battery box opening

(can store 200 x 300 x 140mm single pack battery).

NEW FEATURES: optional MX style ; foldable foot pegs only 2 precut holes for on on/off

switch, and XLR charger socket (rubber sealed);

optional single speed or high speed drive (Schlumpf).

READ MORE ON RAPTOR 140 AT .WWW.QULBIX.COM

NEW FRAME MATERIALS: high tensile strength aluminum super strong (tensile strength construction steel

1200N/mm2, stronger than CrMo steel).

NEW FRAME WEIGHT: by 20-25%lighter

NEW FRAME WIDTH: by 25mmnarrower

Raptor 140 Frame Kit. What’s New Compared to Previous Model?

PAGE 4/30

TIK EM

IB

ARF ELC

YC

#1

It is intended for those who want to take full advantage of optimal seat height for best pedaling performance. The kit is compatible with standard high performance bicycle

components.

The Raptor’s rear shock frame bracket enables three different heights (three holes) for different shock lengths/stroke variations. This allows you to use different shock configurations and adjust the suspension to perfection. In addition, the swing arm has two holes positions for two different rear wheel travel options.

Large inside-the-frame battery compartment can store a large capacity battery for greater performance. High tensile steel with aluminum side plates

makes the frame rigid and stable during intense riding.

The frame has an integrated controller key switch, XLR rubber sealed charging socket, and a display mount hole with a rubber seal.

The Qulbix Raptor Bicycle Frame Kit includes a bolt-on bicycle seat sub frame which can later be easily swapped with the moto seat sub frame.

The controller shield protects bike’s electronics and allows air to flow through freely. Power cables exit the battery compartment through the rubber sealed hole. That way the water stays well away from the batteries.

Standard side (or central) stand bracket will keep the bike standing up while you park it.

OITP N

O

#3

ICB YCLE FRAM

E K

IT WITH

KELLY SHD ILE

Qulbix Raptor 140 Controller Shield Dimensions

Price:

1.090,00 €without VAT or shipping cost

Price:


QULBIX RAPTOR 140

Bicycle Frame Kit with standard (OPTION #1) or larger shield (OPTION #3)

QULBIX Raptor 140

Frame Set

QULBIX Raptor 140 Bicycle Seat Subframe Set

QULBIX

CLAMPING DROPOUT BOLTS& WASHERS

SWING ARMBEARING SET

QULBIX Raptor 140

Swing Arm Set (150mm or 165mm

DROPOUT OPTIONS)

RAPTOR 140 FRAME BASE

BATTERY MOUNTING SET

RAPTOR 140 REAR SHOCK FRAME MOUNTING SET

RAPTOR 140 FRAME SIDEPLATES SET

KEY SWITCH

XLR CHARGING ADAPTER SET

RAPTOR 140 FRAME STICKERS

QULBIX Raptor 140 Controller Shield Set

RAPTOR140 BICYCLE

FRAME KITOITP N

O#1

RAPTOR 140 SWING ARM

RUBBERSEAL D35

BRAKE CALIPER BRACKET

REAR SHOCK MOUNTING MATERIAL

R

QULBIX Raptor 140

Frame Set

QULBIX Raptor 140 Bicycle Seat Subframe Set

QULBIX



QULBIX Raptor 140


DROPOUT OPTIONS)


BATTERY MOUNTINGSET



KEY SWITCH



QULBIX Raptor 140 Kelly Controller Shield Set

RAPTOR140 BICYCLE

FRAME KITwith

SHIELD

OITP N

O

#3


RUBBERSEAL D35



KELLY

OITP N

O

#3

What is included in frame kit OPTIONS #1 and #3?

PAGE 6/30

R

CHOOSE BICYCLE KIT IF you’re looking for optimal seat height settings for best pedaling performance.

The motorcycle seat’s main advantages are the larger sitting area and a very distinctive look. The „moto“ seat allows you to precisely position your body weight when cornering and ensures you have a comfortable ride. Quality made super strong construction steel and aluminum frame feels like you are riding a motorbike. The kit is compatible with standard high performance bicycle components.

The Raptor 140’s rear shock frame bracket enables three different heights (three holes) for different shock lengths/stroke variations. This allows you to use different shock configurations and adjust the suspension to perfection. In addition, the swing arm has two holes positions for two different rear wheel travel options.

Large inside-the-frame battery compartment can store a large capacity battery for greater performance. High tensile steel with aluminum side plates makes the frame rigid and stable during intense riding.

The frame has an integrated controller key switch, XLR rubber sealed charging socket, and a display mount hole with a rubber seal.

The Qulbix Raptor Moto Frame Kit includes a bolt-on moto seat sub frame (and the seat) which can later be easily swapped with bicycle seat sub frame.

The controller shield protects bike’s e l ectronics and allows air to flow through f reely. Power

cables exit the b a t t e r y

compartment through the rubber sealed hole. That way the water stays well away from the batteries.

Price:


OITP N

O

#2OITP N

O

#4

FO RT AO MM E KIT WIT

SHIELD

H K

ELLY

FRO AT MO EM KIT

OITP N

O

#5

O T FO RAM M

E KIT W

ITH

OO

T PEGS

F

Price:


PAGE 9/30

QULBIX RAPTOR 140

Moto Frame Kit

QULBIX Raptor 140

Frame Set

QULBIX Raptor 140 Raptor Moto Seat and Subframe Set

QULBIX





QULBIXRaptor 140


DROPOUT OPTIONS)


BATTERYMOUNTINGSET



KEYSWITCH




RAPTOR140 MOTOFRAME KIT

RAPTOR 140 MOTO SUBFRAME SET

RAPTOR 140 MOTO SEAT SET

OITP N

O

#2


RUBBERSEAL D35

R

QULBIXRaptor 140

Frame Set

QULBIX Raptor 140 Raptor Moto Seat and Subframe Set

QULBIX







KEY SWITCH



RAPTOR140 MOTO

FRAME KIT

QULBIX Raptor 140 Kelly Controller Shield Set

with KELLY SHIELD

OITP N

O

#4




RUBBERSEAL D35



R

What is included in frame kit OPTIONS #2 and #4?

PAGE 10/30

QULBIXRaptor 140


DROPOUT OPTIONS)

QULBIX Raptor 140

Frame Set

QULBIX Raptor 140 Raptor Moto Seat Subframe Set

QULBIX



QULBIXRaptor 140


DROPOUT OPTIONS)








RAPTOR140 MOTO

FRAME KIT OITP N

O

#5withFOOTPEGS



KEY SWITCH

RUBBERSEAL D35




R

What is included in frame kit OPTION #5?

PAGE 11/30

QULBIX Raptor 140 Footpegs Set

Rear Shock Dimensions

Compatible rear shock length & stroke: (267x89 / 240x76 / 222x70 / 216x63 mm). See table below.

Rear Brake Rear brake adapter is included in the kit and is suitable for 200/203 mm rotor and standard brake calipers (for example: Avid Code, Elixir). Two mounting bolts and washers also included.

Key lock Frame integrated key-lock for controller on/off.

Charger Integrated XLR charger socket with rubber cap.

Battery Compartment

Inside frame width: 140 mm, max. opening height: 240 mm, max. battery pack size: 300 x 200 mm. For more info check drawing above.

Derailleur M10x1 threaded hole for standard derailleur installation.

Seat For bicycle seat post diameter 30,9 mm.

Side stand Standard bicycle side/central stand.

Controller Shield Aluminum controller shield with large ventilation holes. Larger (Kelly) controller shield also available. For more info check the product catalog tab.

Weight and material 10,1 kg; frame material: super strong construction steel (tensile strength 1200N/mm2, stronger than CrMo steel); frame side plates: high tensile strength aluminum.

Color options - stickers

White, yellow, orange, red, green or blue. For more info on colors check the gallery tab.

Headset Bearings Suitable for semi integrated 1 1/8'' headset bearing (bearings are not included in the kit.)

Bottom Bracket Suitable for BB shell width 83 mm, BSA (English) thread 1 3/8'' Left/Right (BB is not included in the kit).

Dropout

Clamping type, maximum bolt size: M16, 10 mm slot. Swing arm dropout: 165 mm. Compatible with: Cromotor 155 mm size, spacers come with the motor. Crystalyte The Crown 140 mm, ask for additional spacers – 7 speed free wheel can be installed.

QULBIX RAPTOR 140 FRAME KIT

Specifications

PAGE 12/30

„Bike is incredible and the motorcycle seat makes it much easier to drive fast off-road and corner at speed.

I tend to sit down and get low when traveling fast off-road. It just feels more secure and stable doing that, something that I wouldn't do with a bicycle seat. I of course stand when I drive on very rough terrain or about to hit a curb. The Raptor brings Ebiking to a whole new level.

You can do so much more compared to a converted bicycle ebike. I started to climb stairs and drive down them now where ever I find them.“

Cutomer’s Nickname: Offroader, Endless Sphere Forum (largest ebike on-line forum)

CHOOSE MOTO KIT IFyou prefer:

tracks, dirt trails; MX riding style;

different cornering due to fixed foot pegs position;


Frame Geometry

PAGE 15/30

Dimensions in the table below are based on front wheel size: 26''; rear wheel size: 26''; standard 200/180 mm travel front fork, with crown-axle distance 565 +/-5 mm.

DROPOUT

RWD

FWD

BSH

WB

HTA

BBH

RWT

DROPOUT

RWD

FWD

MSH

WB

HTA

BBHRWT

List of abbreviations:

BBH = Bottom bracket height;

BSH = Bicycle seat height;

MSH = Moto seat height;

HTA = Head tube angle;

WB = Wheel base;

RWT = Rear wheel travel;

FWT = Front wheel

travel;

HTL = Head tube lenght

(150 mm);

SPD = Seat post diameter/seat

tube inner diameter (30,8 mm);

STOD = Seat tube outside diameter (35 mm);

BBW = Bottom bracket width (83 mm);

MTW = Maximum tyre width (90 mm; based on 26''

wheel);

HTID = Head tube inside

diameter (44 mm);

SBL = Shock bushing length (40

mm);

SL = Eye to eye shock

lenght;

PAGE 16/30

FRAME BRACKED ORIENTATION

OPTION #2: „ROTATED“

FRAME BRACKED ORIENTATION

OPTION #1: „STANDARD“

SBL (M8)

HIGHLOW

HIGH

(M8)

REAR SHOCK POSITION

SHOCK SWING ARM POSITION

MIDDLE

LOW

MTW

SL

SBL

CLAMPINGDROPOUTS

M10x1 DERAILLEURor CHAIN TENSIONERMOUNT

10 mm(M14/M16)

DROPOUT

KEYSWITCH(CONTROLLER)

STOD

SPD

XLR FEMALE CHARGING CONNECTOR WITH RUBBER SEAL

SEMI INTEGRATEDHEAD SET BEARING

44 mmHTID

HTID

HTL

ENGLISH THREAD 1 3/8'’24 TPI (LEFT/RIGHT)

BBW

PAGE 17/30

/30


Other Wheel Options

„I’ll be back before they know it.“

r Moms.of elcihev yawateg tseB


Battery Box Specifications

BATTERY BOX OPENING AND

MAXIMUM BATTERY PACK SIZE

PAGE 20/30

performance electric bikes


Electric Motor Compatibility

5x2mm M14

Qulbix Raptor 140 Frame Kits are compatible with most of the hub electric motors on the market (Cromotor, The Crown, Crystlayte H40).

Example: QULBIX RAPTOR 140 is compatible with CROMOTOR. Choose 165mm dropout and Motor Spacer Set #1.

Read more about electric motor compatibility on our website.

PAGE 21/30


Other Products

Price:

15,00 €without VAT or shipping cost

Price:

30,00 €without VAT

or shipping cost

REAR SHOCK MOUNT KIT

MOTOR SPACER SET #1You need this product if you are using the Cromotor with your 165mm dropout Qulbix Raptor Frame; and if you are using the Crystalyte Crown Series with your 150 mm dropout Qulbix Raptor Frame;

Price:


or shipping cost

MOTOR SPACER SET #2You need this product ifyou are using the Crystalyte Crown Series with your 165mm

dropout Raptor Frame.

Price:


MOTOR SPACER SET #3You need this product if:you are using the Crystalyte H40 Series with your 150 mm dropout Qulbix Raptor Frame; you are using the Crystalyte H35 Series with your 150 mm dropout Qulbix Raptor Frame;

Price:


or shipping cost

DROPOUT REINFORCEMENTSSwing arm dropout 10mm reinforcements

for riding with high power electric motors (6kW+) with weaker axis.

PAGE 24/30

Price:


SCHLUMPF HSDSchlumpf High Spreed-Drive Chainring 27 t. h-s-d (83 mm BB) is compatible with the Qulbix Raptor. Included:- High Speed Drive with longer axle,- Chainring 27 t. h-s-d,- Crankarms 160mm black x 2,- Lube 5ml MoS2,- Surcharge for axle special lenght. For Q-factor and other dimensions check our website.Please specify in your order that you wish to use the Schlumpf High Speed Drive, so the bottom bracket chamfering can be done to your Raptor frame. You can also do it yourself, if you prefer.

Manufacturer: Haberstock-Mobility GmbH

All Frame Kit spare parts avaialble seperatly. For more info check our web

catalog o at .www.qulbix.com

PAGE 25/30

/30

QULBIX RAPTOR PRODUCTS

Coming Soon...

SISSAHC

GNILL

OR

TEE L BP IKM E O KIC TS

Qulbix Raptor 140 Frame Kit

Forks, Brakes, Rear Shock, Pedals, Wheels, etc. except: Battery,

Charger & Controller.

Qulbix Raptor 140 Complete Bikes

Complete Turn-Key Electric Bike.

Qulbix Electric Bikes And Frame Kits.Unique As Each Rider.

PAGE 26/30


Interested? Let us know at [email protected]


PAGE 27/30

QULBIX RAPTOR 140 DEALERS

Become Our Dealer!

Qulbix Raptor Frame Kits are shipped out all over the world - Europe, Australia, US, Russian Federation, United Arab Emirates, South America, Hongkong, etc.

Become our dealer, become an important part of our story!

Contact us at or visit our webiste [email protected] www.qulbix.com


performance electric bikesPAGE 28/30

PRODUCT LIABILITY:Qulbix Frame Kits And Electric Bikes are made for off-road use only. Assembly should be done according to instructions stated in Assembly Manual and elsewhere (Qulbix Website: www.qulbix.com). Qulbix (Ulbi d.o.o.) cannot take responsibility for poorly assembled kits. Please read other legal notes at our website.

Always ride safely, taking care of yourself and others!And ... do not forget to have fun.

[email protected]/Qulbixwww.twitter.com/@Qulbix

qulbix catalog november 2014

Documents

frame battery compartment

frame materials

frame rigid

frame weight

bicycle seat sub frame

frame kit5 options

icb ycle frame kit

moto frame kitqulbix