Multifunctional Handheld 3D Scanner

Recommended

Preparation Preparation

Graphics Card

Video Memory

Processor

Memory

Interface

NVIDIA GTX1080 and higher

>4G

I7-8700

64G

high-speed USB 3.0

RequiredGraphics Card

Processor

Memory

Interface

Quadro card P1000 and higher or NVIDIA GTX660 and higher

Intel (R) xeon E3-1230, Intel (R) I5-3470, Intel (R) I7-3770

8G

high-speed USB 3.0

1. Standard Pack

InstallationHardware Installation

InstallationHardware Installation

STEP

01 Turn on the device and connect it to the computer through USB 3.0 port.

2. Industrial Pack

Getting Started with EinScan Pro HD

EinScan Pro HD

Turntable Tripod Scanner tray

USB cable Power adapter Power cable

Device List

STEP

01Fasten the scanner tray onto the tripod and place the scanner on

the tray.

STEP

02Plug the USB cable into the USB port of the turntable and connect it to the computer. Connect the power cable to the turntable.

3.Color Pack

4. Operation EnvironmentAvoid direct sunlight or too bright of light indoors. Make sure the scanned object and table are stable. （For Fixed Scan）

STEP

02

STEP

01Hold the device upright and remove

the USB port cover. The cover is located near the logo on the right

side of the device.

Insert the Color Pack and lock it with a rotary lever.

Run the installer

Software Download

Software Installation

License Activation

Or do local activation and find the license in the USB drive.

Attention: If you install another device of different serial number, the software will automatically notify users to activate this device.

STEP

01

STEP

02

Double click software installation icon to install the software.

After successful installation, when the device is correctly connected, double-click to open the software

and activate the device. The format of activation is “online

activation”. Make sure your computer is connected to the

Internet.

Online Activation

Online Activation

Local Activation

Local Activation

Calibration

Camera Calibration

Follow the instruction on the software to place the calibration board in 5 different positions. Hold the scanner vertically and cover the screen range.

STEP

01

STEP

02

STEP

03

STEP

04

STEP

05Quick Start Guide

Markers

Scanner body Power adapter

Calibration board

Power cable

Calibration board support

USB driveSoftware installer

(EXScan Pro, Solid Edge, user manual)

Cable clip

Industrial Pack (optional)

Color Pack (optional)

Texture camera

Standard PackDownload the software and user manual from www.einscan.com/support/download/

Markers remover /Module port cap lifter

*Please only use water to clean the calibration board, avoid touching any corrosive liquid.

Note:1. Plug in dongle before opening Solid Edge software2. Find the use of phone screen mount in Support-Help at www.einscan.com

Phone screen mount

The first time installing the software , calibration is required by default.

Calibration is also required for the following:

1.Device Change

2.After device enduring bumpy transportation

3.After device accuracy decreases

4.Device being uncalibrated for a long time, for example, 15 days.

5.When using the Color Pack, the texture camera’s position has been

changed.

Calibration

Only required for Color Pack

Hold the scanner vertically to the back side of calibration board (white) and adjust the distance until you find the proper distance.

White Balance Calibration

Handheld HD Scan

Fixed Scan

Select Align ModeTurntable Coded Targets Alignment

Markers Alignment

Feature Alignment

Handheld HD ScanFixed Scan

New Project Open Project

Preview

Scan

Edit

Finish

Mesh

TipsShift + Mouse Left, the selected part turns red, edit the 3D data using buttons on the right. The edit function is only activated after selecting data.

Tips: Shift + Mouse Left, the selected part turns red, edit the 3D data using buttons on the right.

Save point cloud (ASC)

New Project or Open Project

Adjust Angle and Distance

Adjust Brightness

Scan

Edit

Continue Scanning

Auto Align Correctly or Not?

Finish or Not?

N

N

Y

Y

Finish

Mesh Watertight / Unwatertight

Post Processing

Save Mesh (OBJ. STL. PLY. etc.)

Post Processing

Manual Align

With Turntable Without Turntable

Save Separated Point Cloud (separated ASC)

www.shining3d.com

APAC HeadquartersSHINING 3D Tech. Co., Ltd.Hangzhou, ChinaP: +86-571-82999050Email: sales@shining3d.comNo. 1398, Xiangbin Road, Wenyan, Xiaoshan,Hangzhou, Zhejiang, China,311258

EMEA RegionSHINING 3D Technology GmbH.Stuttgart, GermanyP: +49-711-28444089Email: sales@shining3d.comBreitwiesenstraße 28, 70565, Stuttgart, Germany

Americas RegionSHINING 3D Technology Inc.San Francisco, United StatesP: +1415-259-4787Email: sales@shining3d.com1740 César Chávez St. Unit D. San Francisco, CA 94124

www.einscan.com

TipsClick the start button once to previewClick the start button once again to start scan;To adjust the brightness before or during scan, click the start button twice, and using “+” &”-” to highlight or shadow;Keep the scanner vertically to the object surface;Optimize the distance by the color range on the screen or on the scanner. Green color shows an appropriate distance.

Watertight / Unwatertight

Handheld Rapid Scan

Preview

Scan

Edit

Finish

Mesh

TipsShift + Mouse Left, the selected part turns red, edit the 3D data using buttons on the right. The edit function is only activated after selecting data.

Save Mesh

(OBJ. STL. PLY. etc.)

Save Point Cloud (ASC)

Handheld Rapid Scan

Open ProjectNew Project

Select Align Mode Select Resolution Select Texture Select Operation Mode

Select Align Mode Select Resolution Select Texture Select Operation Mode

Watertight / Unwatertight

TipsClick the start button once to preview;Click the start button once again to start scan;To adjust the brightness before or during scan, click the start button twice, and using “+” &”-” to highlight or shadow;Keep the scanner vertically to the object surface;Optimize the distance by the color range on the screen or on the scanner. Green color shows an appropriate distance.

SummaryMode

Handheld HD Scan

Handheld Rapid Scan

Accuracy（mm）

Resolution Point distance

（mm）Align Mode

Turntable Coded Targets, Feature, Markers, Manual

Single Shot Accuracy 0.04 0.24

Scanning TipsScan Mode SelectionUse Handheld Rapid Scan mode when:A fast scanning experience is needed;Objects with good geometry for feature alignment;Objects are hard to move or too big to stay on turntable for scanning.Use Handheld HD Scan mode when:High accuracy and high resolution by handheld scanning is required;Objects are hard to move or too big to stay on turntable for scanning.Use Fixed Scan with Turntable mode when:High accuracy and high resolution is required;Objects’ footprint within 150mm which may not cover most coded targets on turntable;Weight under 5kg;Objects’ footprint above 150mm with rich geometry features can also work in Fixed Scan with Turntable mode through feature alignment. Use Fixed Scan without Turntable mode when:High accuracy and high resolution is required;Objects is too big or heavy to work on turntable.

Up to 0.1

Up to 0.045

Scan Efficiency

Single Scan < 0.5s

Single Scan < 0.5sFixed Scan

Fixed Scan

with Turntable

without TurntableFeature, Markers, Manual

Single Shot Accuracy 0.04 0.24

10 fps3,000,000 points/s

30 fps1,500,000 points/s 0.25-3

0.2-3Markers, Feature

(with rich geometrical features on the surface),

Hybrid(Markers and Feature)

Markers, Feature (with rich geometrical

features on the surface), Hybrid(Markers and Feature)Texture (with rich texture)

+0.3 mm/m (markers alignment)

+0.3 mm/m (markers alignment)

Difficult to Scan Transparent objects like glassesShining or highly reflective objects like mirrors

Moving objects or vibrating objectsLattice structure with many small deep holesHairy objects like human hair and fur

Spray with white powder

Solution

Not Recommended

Technical SupportRegister at support.shining3d.com for supportOr contact through:

Email: einscan_support@shining3d.comSkype: einscan_support

Post Processing

Save Mesh

(OBJ. STL. PLY. etc.)