quick reference guide - blasting
TRANSCRIPT
TM
QUICK REFERENCE GUIDE - BLASTING
BLASTING CABINETS Max Object Size Common Abrasives Common Project Types
Height: 2 ft.Width: 2 ft.Depth: 2 ft.
If larger - call
Glass BeadPlastic MediaAluminum OxideSoda
Small, easy handling (under 100 lbs.)Special abrasive needsDetailed project
BLASTING BOOTHHeight: 13 ft.Width: 13 ft.Depth: 62 ft.
If longer - call
Hopper MixStarblast®Glass BeadCrushed Glass
Large, non-straight objectsAngles & curvesOversized tanksFlat steel plates
Max Object Size Common Abrasives Common Project Types
WHEEL-A-BRATOR Max Object Size Abrasives Common Project Types
Height: 19 inches.Width: 42 inches.Depth: 45 ft.
Steel GritSteel Shot
Long, straight structural beamsOutside of straight pipes
HIGH VOLUME (AUTOMATED) EQUIPMENTBelt Machine
Flat, one-sided blasting. Great for large quantities of flat items.• Glass beads• Fine abrasives
Spinner - Hanger Barrel Blaster
Multi-sided blasting. Great for large quantities of round objects. • Soft shot• Various shot sizes
Tumble blasting. Great for large batches of small items & deburring. • Soft shot• Various shot sizes
THERMAL CLEANING OVENHeight: 6 ft.Width: 5 ft.Depth: 28 ft.Max. Temp: 850° F
Coating burn-offLight degreasing
NOT FOR Aluminum or heavy grease/fuel.
Used For
ABRASIVES
Alum
inum
Stee
l
Stai
nles
s
Plas
tic /
Delic
ate
Mac
hined
Comp
onen
ts
Aluminum Oxide $$$
Coal Slag $
Crushed Glass $$
Garnet $$
Glass Bead $$
Plastic Media $$$
Soda $$$
Soft Shot $$$
Starblast® $$
Steel Grit $$$
Steel Shot $$$
Hopper Mix $
SSPC photographs are shown courtesy of SSPC: The Society for Protective Coatings. The digital photographs provided do not sufficiently depict the photographs that are available in the actual physical SSPC reference photographs and should not be used in the field for comparison. The SSPC-VIS 1 may be purchased at http://www.sspc.org/marketplace/.
RUST GRADE B B-SP-5 / NACE NO 1 B-SP-10 / NACE NO 2 B-SP-6 / NACE NO 3 B-SP-7 / NACE NO 4
RUST GRADE A A-SP-5 / NACE NO 1 A-SP-10 / NACE NO 2
ADDITIONAL SERVICES• Oiling• Rust Inhibitor
• Masking• Profile Testing
• Chloride Removal• SSPC / NACE Specs
• Minor Welding Rep.• DFT/Holiday Testing
SodaCoal SlagGarnet
Tube I.D. & O.D.TrailersCars & trucksBoats
White Metal Near-White
White Metal Near-White Commercial Brush-Off
Short RailingsFlat steel plates
STRUCTURAL
Height: 24 inches.Width: 36 inches.
Steel ShotSteel Grit
CastingsWeldments
Short structural componentsLaser or plasma cut parts
WIRE MESHBELT
$$$ - Relative Cost = Recyclable
TM
QUICK REFERENCE GUIDE - COATINGS
317-545-0665 • (Fax)317-545-0670 • [email protected] • www.idsblast.com2717 Tobey Drive, Indianapolis, IN 46219
WET PAINT BOOTHHeight: 14 ft.Width: 16 ft.Depth: 64 ft.
Cure Temp: 160°F
Heavy EquipmentStructural SteelWeldmentsIndustrial Equipment
Max Object Size Common Project Types
POWDER COATINGHeight: 9 ft.Width: 9 ft.Depth: 25 ft.
Cure Temp: 500°F
AutomotiveIndustrialHomeCommercialRestoration
Max Object Size Common Project Types
PHOSPHATE BOOTHHeight: 12 ft.Width: 12 ft.Depth: 25 ft.
Iron Phosphate pre-treatment for all types of jobs to promote adhesion and coating durability. Our system is a closed system with no drain into the waste water system.
Max Object Size Common Project Types
COATINGS LIST
ZincEpoxyZinc Rich PowderPolyurethanesOrganic Zinc RichCatalysed EpoxiesFast DryHigh-SolidsAlkydAcrylic LatexWet on Wet
PRIMERS
TOP COATSAcrylic UrethanesAlkydDirect to Metal UrethanesEnamelsPolyurethanesClear CoatsSolar ReflectiveWater-based EpoxiesPlural Component
POWDERSPolyesterEpoxyUrethaneHybridsTGIC-Free
SPECIALTY COATINGSArchitectural CoatingsMilitary CoatingsHigh-Temp CoatingsTeflon®
Coating Requirements(Reference MSDS or Data Sheets)
Volatile Organic Compounds (VOC’s)Under 3.5 lbs./gal.
REQUEST YOUR QUOTE
PHONE
Send your request for quote [email protected] attach photos of yourproject if available (18MB Limit).
Call us M-F 8:00am - 5:00pm
317-545-0665
To expedite your quote, please include the following info if available.
• Is your project a new project or reconditioned project?• What type of material? (aluminum, steel, stainless steel, or other?)• What are the dimensions? Can you send prints or photos?• What is the quantity of items?• What is the total weight?• What is your end goal for the project? (clean metal, coated metal, unsure?)• Are there any specific coating requirements for the project?• What is your expected drop-off date to our facility?
HANDLING EQUIP.Crane - 10,000 lb. Capacity (more by request)Forklift - 15,000 lb. Capacity (multiple lifts on-site)Yard Spotter - Semi Trailers - Large Batch Processing Capabilities
ENVIRONMENTALSTEWARDSHIP
Our facility strives to be the industry leader in environmentally friendly practices.
We exceed all federal and local environmental requirements and hold a Federally Enforceable State Operating Permit (FESOP)
Super Heavy LiftingCapabilities
Multiple Item / BatchProcessing Capabilities
Copyright © 2014-2019 IDS Blast, All Rights Reserved