Quick Install Guide

CellGate Support: 972-231-1999 option 2

2019

W460 Series

**Recommended wiring: 18/6 shielded for main device, and 18/4 shielded for optional wiegand devices**

Items Included in Kit

❶ Watchman EVO Unit❷ 12 Volt DC Power Supply❸ Magnetic Read Switch❹ Keys (Note: Leave one key with the customer)

❺ Nuts X 4

❻ Bolts X 4❼ Quick Install Guide❽ Activation & Test Process❾ Customer Information Packet

Watchman EVO Unit Power Supply Wiring

Interface Circuit Board (Oriented the same as the Watchman install)

Important Item

W460

18 ga stranded- up to 25 ft. 16 ga stranded- up to 50 ft. 12 ga stranded- up to 60 ft.

Internet Router connection

internet transport

Interface Wiring Diagram (Oriented the same as the Watchman install)

❶ Wire main power from the transformer to the power connector on thecircuit board.

❷ Connect gate trigger wires from the Normally Open (NO) and Common (C)to the free-exit or exit terminals on the gate operator.

❸ Connect the gate status wires on the 6 pin connector on the main relayand input plug to the magnetic switch or a Dry Contact, Normally Closed (NC)relay on the gate operator.

❹ If using an optional 26-bit reader (ex., keypad, card reader, RFID, orclicker), wire the device to the Wiegand connection on the interface circuitboard.

❺ Use Camera Guide if adding optional external camera.

❻ Test/activate using the test credentials on the Activation & Test Processdocument.

6-Wire Installation Instructions

Important Item

❶

❷

❹

❸

W460