quality control in bangladesh

Asia Textile InspectionsQuality And Audit Inspection In China

We Offer Several Inspection Categories In China Such As:• Container Loading Supervision (CLS)

• Factory & Social Audit FA & SA

• During Production Inspection (DUPRO)

• Initial Production Inspection. (IPI)

• Final Random Inspection (FRI)

• Pre-Production Inspection. (PPI)

http://asiatextileinspections.com

http://asiatextileinspections.com/


Container Loading Supervision (CLS):

CLS Takes Place When 100% Goods Are Packed And Quality Is Approved. It Is Conducted To Ensure That The Empty Container Is In Good Condition And Entire Quantity Is Loaded According To Packing List.




Factory & Social Audit FA & SA:

Through Factory Audits, Clients Can Assure That Factory Has Enough Capability To Insure Timely Delivery And Better Quality. While Social Audits Insure Production Facility Is Following All Social Requirements For Better Environment And Safety Of Society.




During Production Inspection (DUPRO):

DUPRO Takes Place When Approximately 30 To 50% Production Is Completed, Re-ensuring That Initial Discrepancies Have Been Rectified And A Check On The Average Quality Of Production Runs. The Main Benefit Of This Inspection Is That It Allows Another Chance To Apply Corrective Actions Where Necessary.




Initial Production Inspection (IPI):

IPI Takes Place When Approximately 10-20 % Of Total Ordered Quantity Is Produced. Production Status Is Verified At This Stage. Performing An IPI Is A Preventative Steps After That Client Has Sufficient Time To Make Decisions About Production Components, Product Quality And Apply Corrective Actions Where Required.




Final Random Inspection (FRI):

FRI Is To Evaluate The Problems Against 100% Finished & Packed Goods. FRI Is Very Useful Standard Quality Assurance Check Prior To Shipment. For Evaluation Of Final Products To Be Shipped, FRI Is Conducted For Appearance, Quantity, Quality, Size, Specification, Colour And Packing Method/Details. After FRI Client Has Very Clear Picture For His In Coming Products.




Pre-Production Inspection (PPI):

PPI Takes Place Before Start Of Bulk Production. PPI Can Assure Client About Raw Material’s Verification & Status. After PPI, Client Is Sure That Supplier Has Right/Adequate Raw Material For Quality Product.




NORTH AMERICA SALES OFFICE15573 Marine Drive, White Rock, V4B 1C9British Columbia, CanadaTel: +1-604-960-2399Fax: +1-604-648-8449Email: [email protected]: www.asiatextileinspections.com

quality control in bangladesh

Documents

audit inspection