qualimaster, product brochure, en (a00528)
TRANSCRIPT
QualiMaster
Fabric inspection and optimized cutting
QualiMaster is the BMS solution for on-loom, grey and finished fabric inspection.
Installed as a stand alone system or as an extension to the BMS WeaveMaster MES system, QualiMaster offers a powerful fabric inspection solution that allows full quality analysis and fabric classification.
Weaving plants equipped with the WeaveMaster production monitoring system can integrate QualiMaster’s powerful “on-loom” inspection package, thus minimizing the risk for off-quality fabric in the weaving plant and reducing the workload in the grey fabric inspection department.
For finished fabric inspection, dedicated software for optimized mapping and cutting allows to maximize the first quality yield with a minimum of cut operations.
Benefits:
• Reduced off-quality through on-loom inspection• Real time alarms in case of quality problems• Customer specific ticket printing• Full quality reporting• Monitoring inspector efficiency• Extreme flexibility through built in report generator• Interface with ERP systems
EN product brochure A00528
2
On-loom inspection “by pass” at doffing
Quality advice
- By-pass greige inspection if no quality risk
- If a quality risk present, proceed to greige inspection
Stop and defect information
HubEthernet
Quality advice
Quality risk
Calculation based on:- Number of defects- Number of warp and filling
stops- Coverage of inspection- Concentration of above
events
QualiMaster server
Ethernet
On-loomfabricinspectionTo reduce the risk for off-quality, QualiMaster offers a solution for “on-loom” inspection. Using BMSvision Data Units installed on the looms, the roving inspector enters the defect code or declares the fabric “defect free”. Each entry is automatically related to the pick counter, allowing the generation of a piece map during weaving.
Based on the concentration of defects and stops, the system predicts the quality of the fabric. Alarm messages are generated in case of an off-quality fabric and at doffing, the system formulates a quality advice.
In case of first grade, no further inspection is required and the fabric roll can be transferred to finishing or to the finished goods warehouse. If the calculation shows a risk for off-quality, then the roll is sent to the grey inspection or mending department.
Of course, QualiMaster also integrates the BMSvision CyClops automatic on-loom inspection system.
Fabricinspectionterminal(QT)In grey and finished fabric inspection, the inspection frames are equipped with Qt touch PCs. Linked with the length counter, ticket tagging device, machine signals, ... the Qt offers a user friendly interface for defect entry.
The inspector enters the defect just by tapping the corresponding defect button on the screen. Screen layouts can be configured to meet customer’s requirements. A defect map with grade calculation is available on the terminal.
In finished inspection and cutting, instructions can be displayed for cutting and packing the finished goods roll. These instructions can be extracted from the customer related information as stored in the ERP system.
203272 PiecemapandticketprintingFor each piece inspected, be it on-loom, in the grey or in the finished inspection department, QualiMaster generates and stores a piece map. The piece map consists of a user definable header, a summary graph showing the concentration of defects throughout the piece and a detailed list of all defects with their length and width location.
Through edit functions, the user can add, delete or modify defects, insert notes or change the length of the piece. Piece maps can be exported in PDF, CSV or XML format and can be archived for long time storage if required.
In case bigger rolls are cut into small output pieces, QualiMaster allows the reconstruction of the input roll starting from an output piece or can show all output pieces generated from a selected input roll.
At the end of each piece or cut-out, QualiMaster can print a piece ticket. Customer or style dependent ticket layouts can be defined by the user. QualiMaster translates the inspection results in commercial information such as piece length, grade, allowance, ... which are printed on the final piece ticket.
Qt touch PC Ticket examples
For more information CyClops, ask for brochure A00511 and for QT, ask for brochure A00919.
3
AlarmhandlingWith the QualiMaster alarm handling module, the quality manager can follow up on piece quality in real time. Alarm criteria and alarm priorities can be defined for each style or group of styles. Active alarms will appear as a banner in the QualiMaster reports, are displayed on the inspection terminal and are visible in the piece map. In on-loom inspection, a lamp in the loom’s lamp tree can be activated in case of an alarm.
Alarm analysis reports show all the alarms that occurred during a specified period.
QualityreportingThe QualiMaster fabric inspection software comes with extensive reporting. By means of the integrated report generator, these reports can be customized to suit the needs of every textile mill.
Typicalreportsare:• Defect analysis by style: to identify the most important defects
in a particular style.• Grade overview by style: to identify critical styles from a quality
point of view.• Inspector performance report by style.• Quality trend report by style to see the evolution of the quality
over a longer time period. Piece map with cutouts
Grade overview Alarm overview
Optimizedmappingandcutting
QualiMaster offers a very powerful package to optimize the cutting of big rolls into smaller pieces.
If inspection and cutting are done in a two-step process, QualiMaster calculates where to cut the fabric based on the defect map and grading criteria. It takes into account customer requirements such as minimum/maximum piece length, minimum defect free zones, etc. and generates a cut proposal so that a maximum yield in first quality is obtained.
These cutting instructions can be printed out or sent directly to a terminal at the cutting table upon identification of the roll.
Interfaces are available for automatic cutting and packing machines. QualiMaster sends the cutting instructions to the computer of the cutting machine that cuts the roll into smaller pieces as calculated and prints the labels to be fixed to every piece.
Through interfaces with automatic palletizers, the pieces that are cut and packed are automatically put on the right pallet. QualiMaster knows when the pallet or container is completed and gives the instruc-tions to transport it to the finished goods warehouse.
Benefits
• Increased output of first grade fabric.• Reduced customer complaints.• Grading criteria per style/customer.• Interface with automatic cutting and packing
machines.
Cut instruction sheet
Defects and their loca-tion in the fabric
A-frame to A-frame inspection
Qt
Optimized cutting instruc-tions are calculated based
on the grading criteria and defect location
Optimized cutting instructions transmitted and visualized on the cutting machine terminal
Grading criteria stored on the QualiMaster server
Parameters:• Locate cuts on defect locations• Use the min/max piece length
tolerance to position cuts• Avoid short pieces at the end
of the batch• Respect the cut instructions
such as: - Max. defects per 100 m - Max. seams - Max. length running defects - Max. number of major defects
123
A00
528
06 E
N 1
0/3/
2017
DP
D -
Sub
ject
to c
hang
e w
ithou
t prio
r no
tice.
See
ww
w.b
msv
isio
n.co
m fo
r th
e la
test
ver
sion
.
© Belgian Monitoring SystemsMember of the SavioGroup
www.bmsvision.com
Vlamingstraat 16, 8560 Wevelgem, Belgium +32 56 262 611 +32 56 262 690 [email protected]
Capricorn Park, Blakewater Road, Blackburn, Lancashire, BB1 5QR, United Kingdom +44 1254 662 244 +44 1254 267 100 [email protected]
4420 Taggart Creek Road, Suite 112, Charlotte, North Carolina 28208, United States +1 704 392 9371 +1 704 399 5588 [email protected]
Room 402, No.989, Dongfang Road, Pudong New District, Shanghai 200122, China +86 21 6044 4208 [email protected]
BMS bvba
BMS Vision Ltd
BMSVision LLC
BMSvision (Shanghai) Co., Ltd.