qip brochure 2010 mtech1
TRANSCRIPT
-
8/2/2019 Qip Brochure 2010 Mtech1
1/39
QUALITY IMPROVEMENT PROGRAMME
Admission to MasterDegree Programmes
for the academic year 2011-2012
(for teachers of AICTE approved Degree level Engineering Institutions, National Institutesof Technology and National Institutes of Technical Teachers Training and Research)
INFORMATION BROCHURE
Sponsored by
All India Council for Technical Education
(A Statutory Body of Government of India)
Admission coordinated by
Principal Coordinator QIP, Quality Improvement Programme Centre
Indian Institute of Technology Roorkee
ROORKEE 247 667 (Uttarakhand)
-
8/2/2019 Qip Brochure 2010 Mtech1
2/39
2
DATES OF REMEMBER
Access to on-line submission ofapplications
12th Oct. 2010
Closing of on-line applicationaccess
09th Nov. 2010
Last date for receipt of dulyforwarded application along
with enclosures
16th Nov. 2010
-
8/2/2019 Qip Brochure 2010 Mtech1
3/39
3
Dear Prospective QIP Scholar
Your interest in the Quality Improvement Programme (QIP) sponsored by AICTE is appreciated. As you may be aware, themain objective of the programme is to upgrade the expertise and capabilities of faculty members of the AICTE approveddegree-level engineering institutions, National Institutes of Technology (NITs) and National Institute of Technical TeachersTraining and Research (NITTTRs) of the country. The programme launched by the Government of India in the year 1970, isnow being implemented and monitored by the National QIP Coordination Committee, funded through AICTE.
There are three main activities under QIP scheme for the faculty of degree-level engineering institutions:
Providing opportunities to teachers of the degree-level engineering institutions to improve their qualifications by offeringadmissions to Master and Ph.D degree programmes.
Organizing Short Term Courses at the QIP Centres for serving teachers.
Curriculum Development Cell activities which help to improve the class room teaching and learning.
Eight major QIP centres at IITs and IISc undertake the various activities listed above. Admission to Master and Ph.D.programmes are also offered in selected areas in institutions recognized as Minor QIP centres. A large number of teachersfrom engineering institutions from all over the country have pursued Master and Ph.D degree programmes under this scheme.These are aimed at improving the standard and quality of technical education through improvement of the qualifications of thefaculty members of the various engineering institutions.
A Curriculum Development Cell has been set up at major QIP Centres for improving the effectiveness of technical education inthe country. Its activities include curriculum development and revision or preparation of monographs, textbooks, teachers
manuals, teaching aids and other resource materials, examination reforms, organizing inter-institutional programs, seminars,workshops and panel discussions, development of educational technology, creation of methodologies for formal and informaltrainings, technical education of the handicaps, etc. A number of short term courses have also been organized by major QIPCentres for the benefit of the faculty members of Engineering Institutions across the country.
The QIP web sites (www.iisc.ernet.in www.iitb.ac.in www.iitd.ac.in www.iitg.ernet.in www.iitk.ac.inwww.iitkgp.ernet.in www.qip.iitm.ac.in www.iitr.ernet.in www.aicte.ernet.in) will give you necessary informationabout the programme as well as about the requirements and the procedure to apply for admission in Master / Ph.D. degreeprogrammes. The details of the disciplines and specializations available at various centres are listed in the website and alsoavailable in the admission brochure to enable you to make appropriate choices. You can navigate through the links on the lefthand side of the main web page for admission and can download the admission brochure.
Access to the on-line submission of application opens on October 12, 2010 (Tuesday). The last date for the on-line submissionof the application is November 09, 2010 (Tuesday). Please note that the last date for the receipt of the hard copy of applicationat the office of the Principal Coordinator QIP ,IIT Roorkee is November 16, 2010 (Tuesday).
The procedure of admission under QIP involves the following steps:
Scrutiny of all applications in the office of the Principal Coordinator QIP. Short-listing by the QIP centres for interviews and dispatch of call letters to those selected for interviews. Recommendations by the QIP centres to NQCC. Final selection by the National QIP Coordination Committee (NQCC) and Offer of Admission by the Institution where the final selection has been recommended by NQCC.
The schedule of interviews at various QIP Centres is given in the above websites as well as in the brochure, so that you canplan your travel for attending the interviews at places of your choice. For further information about the QIP, the applicationform or any associated item, you may contact to the Principal coordinator QIP or any of the Coordinators of the QIP Centreslisted in the website or brochure.
For further information about a particular institution or a particular department therein, you may directly write to the Head ofconcerned department or the QIP Coordinator of the institution.
Keep in touch with our website.
Wishing you all the best,
Principal Coordinator QIP, IIT Roorkee
http://www.iisc.ernet.in/http://www.iisc.ernet.in/http://www.iitb.ac.in/http://www.iitd.ac.in/http://www.iitg.ernet.in/http://www.iitm.ac.in/http://www.iitm.ac.in/http://www.iisc.ernet.in/http://www.iisc.ernet.in/http://www.qip.iitm.ac.in/http://www.qip.iitm.ac.in/http://www.iitr.ernet.in/http://www.iitr.ernet.in/http://www.aicte.ernet.in/http://www.aicte.ernet.in/http://www.aicte.ernet.in/http://www.iitr.ernet.in/http://www.qip.iitm.ac.in/http://www.iisc.ernet.in/http://www.iitm.ac.in/http://www.iitg.ernet.in/http://www.iitd.ac.in/http://www.iitb.ac.in/http://www.iisc.ernet.in/ -
8/2/2019 Qip Brochure 2010 Mtech1
4/39
4
I. GENERAL INFORMATION
1. The major QIP Centres at IITs and IISc offer admission to Master degree programmes in several disciplines.In addition, institutions recognised as the minor QIP Centres also offer admission to Master degreeprogrammes under QIP in some specific departments.
2. The duration of the Master Degree Programme is 24 months.
3. Candidate should visit the website http://www.iitr.ernet.in for submitting on-line application, updated
information related to: receipt of completed application, candidates called for interview, selected list ofcandidates and all other information pertaining to QIP admission.
4. Candidate should read the Brochure thoroughly before i) filling in the on-line application and ii) sendingthe final print-out of application (duly forwarded by the Head of Institution).
5. Candidates have to first submit their application form on-line throughhttp://www.iitr.ernet.in/qip_admissions_10.Applications without on-line submission will not be considered.Candidate should make sure that proper Institute / Discipline codes are entered, all relevant details are dulyfilled in the respective fields. Access to on-line submission of application opens on October 12, 2010(Tuesday). Last date for on-line submission of application is November 09, 2010 (Tuesday).
6. After filling the application on-line, candidates should send the relevant number of prints of the on-linecompleted form, duly forwarded by the Principal/Head of the Institution, as instructed along with allenclosures and a DD for Rs.500/- (Rs.250/- for SC/ST/PD) drawn in favour of IIT Roorkee QIP, payable at
Roorkee, to The Principal Coordinator QIP, Quality Improvement Programme Centre, IIT Roorkee,Roorkee 247 667 (Uttarakhand).
7. The candidate and the Principal/Head of the Institution forwarding the application should ensure that theapplication is to be send to the Principal Coordinator QIP so as to reach on or before November 16, 2010(Tuesday). Applications received after this date will not be considered. On receipt of the application,acknowledgement will be sent by email.
8. Information given by the candidate in all application print-outs should be same. In case of any differenceobserved in the data relating to experience, marks, designation, addresses, age etc., his/her candidature isliable to be cancelled at any stage even after the selection/ admission.
9. Conditional recommendation by the Principal/Head of the Institution will not be accepted. Applicationssubmitted without signatures of the candidate and the appropriate authorities with seal, and/or
without the required enclosures will automatically be rejected.10. The application number allotted during on-line registration should be quoted in all correspondences, and
such correspondences should be routed through the Principal/Head of the candidates parentinstitution. The application number may be changed in some unavoidable circumstances and will beintimated through email in such cases.
11. Short-listed candidates will receive Interview Call/Admission letter from the respective QIP Coordinator of theInstitute, where they have applied to seek admission. The Principal Coordinator QIP will not send any Callletter to the candidates directly.
12. Interview schedule is final and cannot be altered/changed under any circumstances. Candidate has toappear for interview at the Institute(s), where he/she would like to seek admission. Candidates may plan theirtravel accordingly.
13. Concessions, relaxation, and reservations for candidates belonging to SC/ST/OBC/PhysicallyDisabled/Female candidates are as per rules.
http://www.iitr.ernet.in/http://www.iitr.ernet.in/qip_admissions_10http://www.iitr.ernet.in/qip_admissions_10http://www.iitr.ernet.in/qip_admissions_10http://www.iitr.ernet.in/ -
8/2/2019 Qip Brochure 2010 Mtech1
5/39
5
II. INSTITUTIONS OFFERING MASTER DEGREE PROGRAMMES UNDER QIP AND THEIR CODES
S No. Name of the Institute/University Code
Institutions having Major QIP Centres: The following institutions having QIP Centres which offer admission to Master degree (2-years)Programmes in several disciplines existing in those institutions.
1. Indian Institute of Science, Bangalore 560012 BG
2. Indian Institute of Technology Bombay, Mumbai 400076 BM
3. Indian Institute of Technology Delhi, New Delhi 110016 DL
4. Indian Institute of Technology Guwahati, Guwahati 781039 GW
5. Indian Institute of Technology Kanpur, Kanpur 208016 KN
6. Indian Institute of Technology Kharagpur, Kharagpur 721302 KH7. Indian Institute of Technology Madras, Chennai 600036 MD8. Indian Institute of Technology Roorkee, Roorkee 247667 RR
Other Institutions having Minor QIP Centres: The following recognized institutions also offer admission to Master Degree (2 years)Programmes under QIP in some specific departments as given below:
9. Anna University, College of Engineering Campus, Chennai 600025 AU
(i) Civil Engg., (ii) Electrical Engineering, (iii) Information and Communication Engineering, (iv) Mechanical Engineering
Anna University, AC Technology Campus, Chennai 600025(i) Chemical Engg. (ii) Leather TechnologyAnna University, Madras Institute of Technology, Chennai 600044(i) Aerospace Engineering, (ii) Automobile Engineering,(iii)Electronics Engineering, (iv) Instrumentation Engineering(v) Production Technology
10. Bengal Engineering and Science University, Howrah 711103 BE
(i) Civil Engineering (ii) Electrical Engineering (iii) Mechanical Engineering (iv) Mining Engg.
11. B.M.S. College of Engineering, Bangalore 560 019(i) Machine Design
BS
12. Indian School of Mines, Dhanbad 826 004 IS
(i) Fuel and Mineral Engineering (ii) Mining Engineering
13. Institute of Technology, BHU, Varanasi 221 005 VN
(i) Metallurgical Engineering (ii) Mining Engineering
14. Jadavpur University, Kolkata 700 032 JU
(i) Electrical Engineering (ii) Electronics & Telecommunication Engineering (iii) Mechanical Engineering (iv) ProductionEngineering
15. Malnad College of Engineering, Hassan 573 201(i) Civil Engineering
ML
16. Motilal Nehru National Institute of Technology, Allahabad211004 MN(i) Applied Mechanics (ii) Civil Engineering (iii) Computer Science and Engineering (iv) Electrical Engineering (v)Electronics Engineering (vi) Mechanical Engineering
17. National Institute of Industrial Engineering, Mumbai 400087(i) Industrial Engineering
NI
18. National Institute of Technology, Calicut - 673 601Offer admission to Master degree programmes in several disciplines
CL
19. National Institute of Technology Karnataka, Surathkal 575025Offer admission to Master degree programmes in several disciplines
SK
20. National Institute of Technology, Rourkela 769008 RK
(i) Ceramic Engineering (ii) Chemical Engineering (iii) Civil Engineering (iv) Computer Science and Engineering (v)Electrical Engineering (vi) Electronics and Communication Engineering (vii) Mechanical Engineering.
21. National Institute of Technology, Tiruchirappalli 620025(i) Civil Engineering (ii) Computer Science & Engineering (iii) Electrical and Electronics Engg.(iv) Mechanical Engineering (v) Metallurgical Engineering (vi) Production Engineering
TR
22. National Institute of Technology, Warangal - 506004(i) Civil Engg. (ii) Electrical Engg. (iii) Electronics & Communication Engg. (iv) Mechanical Engg.
WR
23. PSG College of Technology, Coimbatore 641004(i) Computer Science and Engineering (ii) Electrical and Electronics Engineering (iii) Mechanical Engineering (iv)Production Engineering (v)Textile Technology
PS
24. Shri G. S. Institute of Technology and Science, Indore 452003 GS
(i) Electrical Engineering25. Shri Jayachamarajendra College of Engineering, Mysore - 570006
(i) Civil Engineering (ii) Electronic and Communication (iii) Instrumentation Technology(iv) Mechanical Engineering
SJ
26. University Visveswaraya College of Engineering, Bangaluru 560056 UV
(i) Civil Engineering27. Visvesvaraya National Institute of Technology, Nagpur 440011 VR
(i) Civil Engineering (ii) Electrical Engineering
-
8/2/2019 Qip Brochure 2010 Mtech1
6/39
6
III. CODES FOR DEPARTMENTS OFFERING MASTER DEGREE PROGRAMMES AT VARIOUS INSTITUTIONS
Department/Centre Code Institution(s) Offering Master Degree Programme
Aerospace Engineering AE BG, BM*, KH, KN, MD,AU
Aeronautical Engineering AE AU
Agriculture and Food Engineering AG KH*
Alternate Hydro Energy Centre AH RR
Applied Mechanics AM DL, MD, MN
Applied Mechanics Hydraulics AM SK*Architecture and Planning AR RR
Architecture and Regional Planning AP KH
Automobile Engineering AU AU
Biomedical Engineering BM BM
Biotechnology BT KH
Energy Studies (Centre) EN DL
Polymer Science & Engineering (Centre) PS DL
Chemical Engineering CH AU, BG, BM, DL, GW, KH, KN, MD, RK, RR, SK*,
Ceramic Engineering CM RK
Civil Engineering CE AU, BE, BG*, BM*, CL*, DL*, GW*, KH*, KN*, MD*,
ML, MN, RK*, RR*, SJ, SK*, TR*, UV, VR, WR*Computational Science (Super ComputerEducation & Research Centre)
CP BG
Computer Engineering CS CL*, SK
Computer Science & Engineering CS BG, BM, DL, GW, KH, KN, MD, MN, PS, RK, TR
Corrosion Science & Engineering CO BM
Cryogenic CR KH
Chemistry CY RR
Earthquake Engineering EQ RR*
Electrical & Electronics Engineering EE PS*, SK,TR
Electrical Communication Engineering EC BG
Electrical Engineering EE AU,BE, BG, BM*, CL*, DL, GS, JU*, KH*, KN,MD*, MN, RK, RR*, VR, WR
Electronics and Communication IL SJ
Electronics & Communication Engineering EC GW*, RK, SK*, WR*
Electronics and Computer Engineering LC RR
Electronics & Electrical Communication Engg. EC KH*
Electronics & Telecommunication Engineering EC JU*
Electronics Design and Technology (Centre) ED BG
Electronics Engineering EC AU,CL*, MN
Energy Science and Engineering EN BM
Environmental Engineering and Management EM KN
Environmental Science & Engineering EV BM
Fuel and Mineral Engineering FM IS
High Voltage Engineering HV BG
Humanities HU SK
Humanities and Social Sciences HS KH
Hydrology HY RR
Industrial and Management Engineering IM KN
Industrial Engineering & Operations Research IO BM
Industrial Engineering IE NI
Industrial Engineering and Management IM KH
Industrial Tribology and Maintenance Engg., TR DLInformation and Communication Engineering IC AU
-
8/2/2019 Qip Brochure 2010 Mtech1
7/39
7
Department/Centre Code Institution(s) Offering Master Degree Programme
Instrumentation IN BG
Instrumentation Technology IN SJ
Instrumentation Engineering IE AU
Internet Science and Engineering IS BG
Laser Technology LS KN
Leather Technology LT AU
Machine Design MD BS
Material Science MS KH, KN
Materials and Metallurgical Engineering MT KN
Mathematical and Computational Sciences MC SK*
Mathematics MA DL, KH, MD
Mechanical and Industrial Engineering ME RR
Mechanical Engineering ME AU, BE, BG, BM*, CL*, DL, JU*, GW*, KH*, KN,MD*, MN, PS*, RK*, SJ, SK*, TR*, WR
Metallurgical and Materials Engineering MT KH, SK*
Metallurgical and Materials Engineering MM MD
Metallurgical Engineering & Materials Science MM BM*Metallurgical Engineering MT TR*, VN
Metallurgical Engineering and MaterialEngineering
MT KH, RR
Materials Engineering MT BG
Microelectronic System ML BG
Mining Engineering MI BE, IS, KH, VN
Nuclear Engineering and Technology NE KN
Nanotechnology NT RR
Ocean Engineering OE MD
Ocean Engineering and Naval Architecture OE KH
Physics PH DL, MD ,Physics and Meteorology
RRPM KH*
Production Engineering PE JU*, PS*, TR*
Production Technology PT AU
Ranbir and Chitra Gupta School of InfrastructureDesign & Management
ID KH
Reliability Engineering RE BM, KH
Rubber Technology RT KH
School of Information Technology IT KH
Signal Processing SP BG
Systems and Control Engineering SC BM
Systems Science and Automation SA BG
Textile Technology TX DL, PS
Water Resources Development WR RR
Centre for Educational Technology ET KH
* Specializations have to be indicated while opting for the particular department. Code for the specializations are givenalong with the details corresponding to the particular institution (Depts. & Field of Specialisation).
-
8/2/2019 Qip Brochure 2010 Mtech1
8/39
8
IV. ELIGIBILITY CRITERIA
1. Only candidates (such as lecturers, readers, assistant professors, associate professors and professors) with a minimum of two-years teaching experience as full-time regular/permanent teachers of AICTE approvedDegree level Engineering Institutions, National Institutes of Technology (NITs) and National Institutes ofTechnical Teachers Training and Research (NITTTRs) as on September 30, 2010 (Thursday) are eligible toapply. Admissions to Master degree programme under QIP are open only to candidates with a basic degreein Engineering or Technology or Architecture or such other qualification.
2. The candidate should satisfy the minimum eligibility criteria prescribed by the individual Department (and/or
the Institution) to which admission is sought.3. Computer Programmers, Systems Programmers, Workshop Staffs, Guest Lecturers, Visiting Lecturers,
Teaching Assistants, Ad-hoc/Contract or Part-time Teachers, Technical Assistants, Research Engineers,Scientific Officers and other such categories of staff are not eligible.
4. Teachers of the Major QIP centers are not eligible.
5. Teachers of the Minor QIP centres are eligible to apply to Major QIP Centres.
6. Teachers of the minor QIP centres are permitted to apply for a field of specialization available in anotherminor QIP centre, which is not available in their parent department on the specific recommendations of theDepartments and Institutes Head stating that a faculty in the particular specialization is required for theirInstitution.
V. SCHOLARSHIP AND CONTINGENCY GRANTThe candidates admitted for the Master degree programme under QIP will receive a sum of Rs. 4,000/-permonth as living expenditure allowance and a contingency grant of Rs. 3,000/-per annum for two years.
VI. CONDITIONS FOR ADMISSION
1. Admission is possible only to the Institutions and the Departments listed in the Information brochure.
2. The final admission of the candidate will be subject to the clearance and approval by the AdmissionWing (Section) of the concerned institution as per its rules and regulations in force at the time ofadmission.
3. The candidate, if selected, should be relieved to join the programme in time for the session to which he/she isadmitted.
4. The candidate joining the Master degree programme under QIP on deputation would be entitled to receivehis/her salary and allowances, which must be paid by the parent institution sponsoring him/her.
5. Conditional recommendation by the Principal/Head of the Institution will not be accepted.
6. The Principal/Head of the Institution of a candidate who is selected for admission should ensure that thesponsorship certificate is produced by the candidate at the time he/she joins the course.
7. If a QIP scholar discontinues Master degree programme, the scholar has to refund the scholarshipand contingency received to the AICTE through the QIP Centre, and the parent institution may seek refund ofthe salary and allowances paid to him for the period he/she attended the programme.
VII. INSTRUCTIONS FOR COMPLETING THE ON-LINE APPLICATION
General Instructions1. The candidate should first register by clicking New Registration. An email confirming the registration will be
sent by assigning an application number and a password. The application number and the password arerequired for subsequent operations. Hence the candidate should remember them or keep them at a safeplace.
2. Candidate can start filling up the on-line application by logging in through View/Edit Application.
3. On-line application can be completed in one or more sessions by revisiting the website using the assignedapplication number and password.
4. The candidate should enter all required information correctly in all fields of the on-line application.
5. After filling the fields, the candidate can save the information in between by using the SAVE button. Thecandidate can edit data in any field till the final submission and printout is taken. The last date for on-line
submission of application is November 09, 2010.
-
8/2/2019 Qip Brochure 2010 Mtech1
9/39
9
Personal Information
6. For the Designation field, the candidate should choose one of the following designation codes from thecombo box. For designations not covered, the candidate should specify the exact designation under the otherdesignation field, failing which his / her application cannot be considered.
Designation Code Designation Code Designation Code
Assistant Lecturer 1 Senior Lecturer 4 Associate Professor 7
Associate Lecturer 2 Reader 5 Professor 8
Lecturer 3 Assistant Professor 6 Other Designation 9
7. After completing the Name, Designation, Department and Address fields (using the pull-down menu) enterDate of Birth; Gender as Male or Female; the category by General, SC, ST, or OBC; put Yes if youbelong to Physically Disabled Category and No if you do not; Married as Yes if you are married and No ifyou are single.
Educational Qualifications and Academic Data
8. During the process of entering the application details, additional sub-links are provided in appropriate places.For example, while entering the overall performance of the candidate under Educational Qualifications, therewill be a link through which the candidate can furnish the semester wise / year wise particulars.
9. For filling Academic data and Additional qualification, if the absolute marks are awarded, then fill, e.g.650/800 where the total marks obtained is 650 out of a total of 800. If the Grade Point Average (GPA) isawarded, fill, e.g. 6.7/10 where 6.7 is GPA obtained on a scale of 10. If the candidate has failed in anysubject during any semester examination and cleared that subject in a later semester, the marks obtained inthat subject should be added back to the semester in which it was supposed to have been cleared and thenthe total marks is to be calculated. Candidate should take the marks of all the semesters for calculatingthe overall percentage or CGPA (irrespective of the methodology adopted by the university/college inawarding final class/division).
10. During the entry of details like detailed semester wise / year wise information, detailed teaching experienceetc., the candidate has to enter the details for which documents of proof are to be attached.
Institute and Department Preferences
11. A candidate can apply to a maximum of three institutions and a maximum of two departments in each of thechosen Institutes (i.e., maximum of total six options only).
12. Select the Institution by using the pull-down-menu as per the order of your preference. Then enter theprogramme code desired as per preferred choices with valid code.
13. Appropriate list of valid codes can be viewed using links provided. The code contains 6 characters; the first2 alphabets identify the Institute, the next 2 alphabets identify the department within the Institute and the last2 digits identify the field of specialization. For example, a code RRME01 represents a particular field ofspecialization in the Department of Mechanical and Industrial Engineering, IIT Roorkee.
Preview of Application
14. Once the complete details about the candidate are entered and saved, the on-line application can be printed.To preview the completed application, the candidate can print a draft copy of the application. He should
check the completeness and correctness of the information; if needed, corrections can also be made beforethe final submission.
Final Confirmations and Printouts
15. After finalizing the contents of the application, the candidate should invoke the FINAL version of theapplication. Click here for printing the FINAL version of the application. Once the FINAL version option ischosen, the candidate will not be allowed to modify the contents of the application. The FINALversion should be printed only on A4 sheet with the print orientation as portrait , and margins as 20mm (left, right, top and bottom). The print report contains multiple copies of the application. The first copycorresponds to the copy for IIT Roorkee QIP and one copy each for the preference code related to thenumber of institutions and departments, a candidate proposes to apply to.
-
8/2/2019 Qip Brochure 2010 Mtech1
10/39
10
16. The following Table indicates the number of printouts to be taken and the number of sets of enclosuresrequired as related to the number of institutions and departments a candidate proposes to apply.
17. In each copy, the candidate should affix his/her recent stamp-size photograph in the space provided.
18. The candidate should thoroughly verify the contents of the printed documents and sign at the appropriate places.
19. In the Forwarding Note of the Application Form, the space provided for the Name of the Candidate andTeaching Experience must be duly filled in and signed by the Principal / Head of the Institution along withthe Office Seal.
20. Applications submitted without signatures of the candidate and the appropriate authorities with seal, and/or withoutthe required enclosures will automatically be deemed invalid.
VIII. APPLICATION FEE
A demand draft for Rs 500/-for General/OBC Category and Rs. 250/-for SC/ST/PD candidates, drawn in favour ofIIT Roorkee QIP payable at Roorkee should be attached with the form marked as, Copy for PrincipalCoordinator on top of the form. Candidate should write their application number, name, address and coursesapplied on back side of the DD. Candidate should note that the fee paid other than DD i.e., by IPO, cheques, etc.are not acceptable. Application fees once paid cannot be refunded.
IX. CHECKLIST FOR EACH COPY OF THE APPLICATION FORM
In Forwarding Note, the candidate should check his/her Name, years and months of experience,
signature (Head of Institution), date, and office seal. Photographs:Affix recent stamp size photographs at space provided on all printed copies of Application Forms
including the Copy for Principal Coordinator.
Signatures of the Applicant:The candidate should sign in all the printouts at relevant places.
Candidate should ensure that all informations are properly filled in and required number of print-outs taken andall copies are to be send in a single envelope to the Principal Coordinator QIP, IIT Roorkee.
Enclosures
1. Application Fee: DD of Rs. 500/- for General/OBC Category and Rs. 250/- for SC/ST/PD candidates should beenclosed with the copy of the Principal Coordinator QIP form only.
2. Candidates belonging to SC, ST or OBC category, must attach an attested copy of the caste certificate issued bya competent authority as per the Government of India rules.
3. Physically Disabled candidates must attach a copy of the certificate issued by a competent authority as perGovernment of India rules.
4. Enclose attested copies of all the relevant certificates
Certificates of the Qualifying Examination and other Degrees
Age proofing Certificate Mark Lists of all years/semesters of qualifying examination (mark sheets clearly showing total
marks obtained out of maximum marks according to semester or year) Teaching Experience
Industrial/Research Experience Certificates.
Certificates of Short Term Courses attended.
All Research Publications.
Any other Academic Qualifications/Awards etc.
No. of Institutionschosen
Total No. of Departments (streams orspecialisations) chosen
No. of applications to be printed andNo. of sets of enclosures required
1 1 2
1 2 3
2 2 3
2 3 4
2 4 5
3 3 4
3 4 5
3 5 6
3 6 7
-
8/2/2019 Qip Brochure 2010 Mtech1
11/39
11
X. INSTRUCTIONS FOR DESPATCHING
1. For the convenience of the candidate, a check list is also printed as the last page. One can use this list andensure the completeness of application. Once completed, the entire bunch (all copies) is to be dispatched tothe Principal Coordinator QIP, IIT Roorkee along with the DD of the relevant amount.
2. Before mailing the completed forms, please ensure that each copy of application form and itsenclosures are properly fastened with a tag separately at the left-hand top corner.
3. In case, your applications are submitted by your sponsor, it is your responsibility to ensure that theapplication is forwarded to the Office of the Principal Coordinator QIP, IIT Roorkee well within the time so as
to reach on or before November 16, 2010 (Tuesday). Applications received after this date will not beconsidered.
4. In case, the candidate has forgotten the password, the candidate should send an email (using the email IDmentioned in the on-line application) to [email protected] furnishing the following details: Application Number,Name of the Candidate, Date of Birth, Address for Correspondence, Gender and Category. After verification,the candidate will be informed the password through email only.
5. The requisite number of the print-outs of the application submitted on-line, along with the required number ofenclosures, as mentioned, should be sent to The Principal Coordinator QIP, Quality ImprovementProgramme Centre, IIT Roorkee, Roorkee 247 667, preferably by Speed Post or Courier Service, toreach the Office on or before November 16, 2010 (Tuesday). Applications received after this date willnot be considered: All the completed forms along with enclosures should be sent only to the PrincipalCoordinator QIP, IIT Roorkee. For any clarification contact: Phone: 01332 285241, 285247; Fax: 01332
286691, 273560; Email: [email protected].
XI. LAST DATE
The last date for on-line submission of application is November 09, 2010 (Tuesday). Print-outs of the on-line filled-in application, including the Copy for Principal Coordinator, with its enclosures, complete in allrespect should reach The Principal Coordinator QIP, Quality Improvement Programme Centre, IndianInstitute of Technology Roorkee, Roorkee 247 667, on or before November 16, 2010 (Tuesday).Applications received after this date will not be considered .
XII. PROCEDURE FOR ADMISSIONS UNDER QIP
1. Short-listing of the candidates will be done first by the office of the Principal Coordinator, then finally at theDepartment/Institute concerned. Interview letters will be sent to the short-listed candidates by the
Department/institute concerned.2. Interviews will be conducted in the Departments at the individual Institutions. Schedule of interviews is
provided in the next Section. Please note that No TA/DA will be paid to candidates for attending theinterviews.
3. Selections will be made by the National QIP Coordination Committee based on the recommendations ofvarious institutions.
4. Final Results will be available at the website:www.iitr.ernet.in
5. Admission letters will be issued to the selected candidates by the respective QIP centres or Academicsection of the institutions offering the admission.
mailto:[email protected]:[email protected]://www.iitr.ernet.in/http://www.iitr.ernet.in/http://www.iitr.ernet.in/http://www.iitr.ernet.in/mailto:[email protected]:[email protected] -
8/2/2019 Qip Brochure 2010 Mtech1
12/39
12
XIII. SCHEDULE OF INTERVIEWS FOR ADMISSION TO MASTER DEGREE PROGRAMMES UNDER QIP
The following dates of interview at various QIP Centres, finalized by National QIP Coordination Committee,are final and cannot be altered under any circumstances.
S.No InstituteInterview
DateDay
1 National Institute of Technology, Calicut 07-01-11 Friday
2 National Institute of Technology, Tiruchirappalli 11-01-11 Tuesday
3 Malnad College of Engineering, Hassan 17-01-11 Monday
4 PSG College of Technology, Coimbatore 19-01-11 Wednesday
5 Anna University, Chennai 21-01-11 Friday
6 IIT Madras 24-01-11 Monday
7 National Institute of Technology, Warangal 26-01-11 Wednesday
8 SJ College of Engineering, Mysore 28-01-11 Friday
9 UVCE, Bangaluru 31-01-11 Monday
10 BMS College of Engineering, Bangalore 01-02-11 Tuesday
11 IISc Bangalore 02-02-11 Wednesday
12 National Institute of Technology Karnataka, Surathkal 04-02-11 Friday
13 Visvesvaraya National Institute of Technology, Nagpur 07-02-11 Monday
14 National Institute of Industrial Engineering, Mumbai 08-02-11 Tuesday
15 IIT Bombay 09-02-11 Wednesday
16 SGS Institute of Technology & Science, Indore 11-02-11 Friday
17 National Institute of Technology, Rourkela 14-02-11 Monday
18 IIT Guwahati 16-02-11 Wednesday
19 IIT Kharagpur 18-02-11 Friday
20 Indian School of Mines, Dhanbad 21-02-11 Monday
21 Jadavpur University, Kolkata 22-02-11 Tuesday
22 Bengal Engineering and Science University, Howrah 23-02-11 Wednesday23 IIT Roorkee 25-02-11 Friday
24 Institute of Technology, BHU, Varanasi 28-02-11 Monday
25 Motilal Nehru National Institute of Technology, Allahabad 01-03-11 Tuesday
26 IIT Kanpur 02-03-11 Wednesday
27 IIT Delhi 04-03-11 Friday
XIV. DEPARTMENTS AND FIELDS OF SPECIALISATION AT VARIOUS INSTITUTIONS
The departments offering admission to Master degree (2 years) programmes at various institutions and the fieldsof specialization in the departments are listed in the Tables given below.
Specializations mentioned indicate only areas of interest, and are not exhaustive. There may not be admissionsopen to all the areas indicated, and candidates, if found suitable, may be admitted to related areas also.
The details given are subject to variation and change from time-to-time and only those operating in the respectiveinstitutions at the time of actual admissions are applicable. Candidates desirous of more information such as foraccommodation, fee structure etc. may write/contact to the QIP Coordinator of the individual institution or visittheir website.
-
8/2/2019 Qip Brochure 2010 Mtech1
13/39
13
1. Indian Institute of Science Bangalore - BG
In all cases, the minimum eligibility is second class or equivalent grade point in the qualifying examination or Bachelors degree in Sciencewith Physics and Mathematics in the curriculum followed by the professional diploma as relevant to individual departments.
Code Department Fields of Specialization Minimum Qualification
BGAE01
AerospaceEngineering
Structures, Aerodynamics, Propulsion, Control andGuidance of Aircraft, Rockets and Spacecraft.
BE/B.Tech. or equivalent degree in Aeronautical,Chemical, Civil, Mechanical Engineering,Instrumentation & Control, Electrical, Electronics,OR Communication or B.Sc. or equivalent degreefollowed by AMIE/ AMAeSI/ AMIIChE/ IETE,GRAD
BGCH01
ChemicalEngineering
Biochemical Engineering; Catalyst Synthesis;Complex Fluids; Environmental Engineering; Multipleflows; Molecular Simulations; NanoparticleEngineering; Population Balance Modelling;Reaction Engineering; Rheology, StatisticalMechanics; Theoretical and Compuitational Biology,Therapeutic Engineering; Transfer Processes;Modern Instrumental Methods of Analysis; EnergyStorage.
BE/B.Tech or equivalent degree in ChemicalEngineering, or B.Sc. or equivalent degree withMathematics as one of the subjects followed byAMIE in Chemical Engineering, or AMIIChE
BGCE01
CivilEngineering**
Geotechnical Engineering BE/BTech or equivalent degree in Civil Engg. orB.Sc. or equivalent degree followed by AMIE inCivil Engg.**Each of the 3 specialization conducted by CivilEngg. department would constitute a separatepreference.
B.E./B.Tech in any discipline
BGCE02Water Resources & Environmental Engineering
BGCE03 Structural Engineering
BGCE04 Transportation and infrastructure Engineering
BGCS01
ComputerScience andEngineering
Theoretical Computer Science:Design of Algorithms, Coding theory, Cryptography,Formal Verification, Graph theory, Logic,Randomized Algorithms, Computational Geometry,Computational Topology.Systems and Software:Compilers, Computer Architecture, ComputerNetworks, Databases, Distributed Computing,Embedded Systems, Energy-Aware Computing,Mobile & wireless systems, Operating Systems,Real-Time OS, Storage Systems, Systems Security,Visualization, Graphics, Programming Languages.Automation:Auctions and Mechanism design, Bioinformatics,
Data Mining, Electronic Commerce, Game Theory,Intelligent agents, Machine Learning, Patternrecognition, Reinforcement Learning, StochasticControl and Optimization, Stochastic Simulation
BE/B.Tech or equivalent degree in ComputerScience and/or Engineering (CS) or InformationTechnology (CS) or Information Science andEngineering (CS).
BGSA01
Systems Scienceand Automation(Jointlyconducted bydepartment ofElectrical Engg.& ComputerScience andAutomation)
Signal Processing, Pattern Recognition, Data Mining,Neural Networks, Image Processing, SensorNetworks, Computer Vision, Medical and DocumentImage Analysis and Recognition, SpeechProcessing, Multimedia and Real Time Systems.
BE/B.Tech. or equivalent degree in ComputerScience/ Engg., Electrical, Electronics,Communication, Instrumentation, Mechanical orChemical Engg.; OR B.Sc. or equivalent degreefollowed by AMIE in Electrical, Electronics andCommunication, Mechanical or Chemical Engg.,GRAD.IETE, AMIChE, Candidates should havedone a formal course in Programming in Clanguage.
BGEC01
Electrical
CommunicationEngineering
Communication and Networking, Microelectronics,Microwaves, Photonics, Signal Processing.
BE/B.Tech. or equivalent degree in Electronics &Communication (EC), Telecommunication (EC).,Electronics (EC) or Electrical Engineering with
specialization in Electronics & Communication(EC), OR B.Sc. or equivalent degree followed byGRAD. IETE (EC), AMIE in Electronics &Communication (EC) or Wireless Communication(EC).
BGEE01ElectricalEngineering
Power Systems, High Voltage Engineering, PowerElectronics
BE/B.Tech. or equivalent degree in Electrical, orElectrical and Electronics or B.Sc. or equivalentdegree followed by AMIE in Electrical.
BGME01 MechanicalEngineering
Internal Combustion Engines and TechnicalAcoustics; Material Science, Mechanical SystemsAnalysis and Design; Thermal Science, FluidMechanics and Solid Mechanics, MEMS, Bio-mechanics.
BE/B.Tech or equivalent degree in MechanicalEngg. or B.Sc. equivalent degree withMathematics followed by AMIE in MechanicalEngg., or AMIMechE(I)
BGMT01
MaterialsEngineering
Physical Metallurgy, Mechanical Metallurgy,Chemical Metallurgy, Extractive Metallurgy, Materials
Processing, Alloy Design, Ceramics, Compositesand Modeling, Fine Particle Processing.
BE/B.Tech or equivalent degree inMetallurgy/Mechanical Engineering/Chemical
Engineering/Ceramic Engineering/Technology orB.Sc. or equivalent degree with Mathematics,Physics & Chemistry followed by AMIE inMetallurgical Engg. or AMIIM.
-
8/2/2019 Qip Brochure 2010 Mtech1
14/39
14
Code Department Fields of Specialization Minimum Qualification
BGML01
MicroelectronicSystem(Jointlyconducted by,ElectricalCommunicationEngg. & Centrefor Electronicsdesign &Technology)
Semi-custom VLSI Design-FPGA, ASIC, Sub micronCMOS Device Technology; Analog and RF circuitdesign, MEMS.
BE/B.Tech or equivalent degree in Electrical (EE),Electronics and Communication (EC), ComputerScience (CS), Instrumentation with Electronics(IN)
ORB.Sc or equivalent degree followed by AMIETE(EC) or AMIE in Electrical (EE) or Electronics andCommunication(EC)
BGSP01
SignalProcessing(Jointlyconducted byElect. Engg &ElectricalCommunicationEngg.)
Medical Signal, Speech, Audio and Image/videoProcessing, Compression, Array Processing, DSPArchitectures, Pattern Recognition, BiomedicalImaging, Bio-inspired Signal Processing.
BE/B.Tech. or equivalent degree in Electrical,Electronics and Communication OR B.Sc. orequivalent degree followed by GRAD. IETE orAMIE in Electrical or Electronics andCommunication.
BGED01
ElectronicsDesign andTechnology(Centre forElectronicsDesign andTechnology)
Communication Networks, Embedded Systems,Power Conversion, VLSI Design, ElectronicPackaging, Instrumentation.
BE/B.Tech. or equivalent degree in Electronics asone of the subjects or B.Sc. or equivalent followedby AMIE a relevant area of specialization ORM.Sc. in Physics with Electronics as the specialsubject. (M.Sc. degree or equivalent degreeholders should possess 2 years experience inElectronic Hardware)
BGIN01
Instrumentation
Analytical Instrumentation, ElectronicInstrumentation, Laser and Optical Instrumentation,Solar Energy and Thermal Instrumentation, Vacuumand Thin Films.
M.Sc. or equivalent degree with specialization inInstrumentation/Electronics/equivalent orB.E./B.Tech. or equivalent degree inInstrumentation/ Instrumentation & ControlEngineering or Electronics &Instrumentation/Electronics.
BGCP01ComputationalScience(SupercomputerEducation &ResearchCentre)
Multi-disciplinary program addressing, HighPerformance Computing, Computational issues inlarge scale problem solving, Simulation in Scienceand Engg., Numerical Techniques and Algorithms,Computational Biology.
BE/B.Tech. or equivalent degree in any disciplineM.Sc. or equivalent degree in any disciplineM.C.A.
In all cases strong mathematical and programmingbackground is required.
-
8/2/2019 Qip Brochure 2010 Mtech1
15/39
15
2. Indian Institute of Technology Bombay - BM
The FIRST class (60%) in qualifying degrees (55% for SC / ST) is essential for general eligibility.
Code Department Fields of Specialization Minimum Qualification
BMAE01
AerospaceEngineering
Aerodynamics AE, ME, CE Bachelors degree in Aerospace,Mechanical, Civil, Electrical/Electronics or its equivalent.BMAE02 Dynamics and Control AE, ME, EE, EC
BMAE03 Aerospace Propulsion AE, ME
BMAE04 Aerospace Structures AE, ME, CE
BMCH01 ChemicalEngineering
Research Areas:1. Biochemical Engineering and Biotechnology
Metabolic Engineering, Applied Enzymology, Bioseparations, Bioinformatics,Drug Discovery, Vermiculture, Waste Mangement, Pollution Control andEnvironmental Engineering, Stem cells, Food Process Engineering andBiosystems Engg.
2. Interface Engineering and Science.Colloids, Solgels, Emulsions, Foams, Nanoparticles, MicrostructuralEngineering, Aerosols, Characterization of mesostructured materials,Nanomaterials and Nano Technology, Polymer Adsorption, Interfacial ReactionEngineering.
3. Systems Engineering.Process Control, Process Simulation, Optimization, Computer Aided Design,Process Integration, Optimal Resource Management, Artificial Intelligence,
Mathematical Modelling of large systems such as regional and global climate.4. Materials and processing.Polymer Materials, Polymer Reaction Engineering, Polyurethanes, Rubber,Polymer Rheology, Ceramic Materials, Granular Flow and Mixing, Soft Soilds
5. Reaction Engineering and Catalysis.Petrochemicals, Process Development, Membrane Separations, Pressure SwingAdsorption, Supercritical Extraction, Reactive Distillation, Fluidization. Fuel cells,Kinetic Modelling of large systems nonlinear phenomena, Multiphase andMultifunctional Reactions, Microreactors.
Bachelorsdegree inChemical Engg.OR equivalent
BMCE01
Civil Engineering(code no. of thespecialization to beindicated in the datasheet)
Transportation Systems Engineering Bachelor Degree in Civil Engg. or equivalent.
BMCE02 Geotechnical Engineering
BMCE03 Water Resources Engineering
BMCE04Structural Engineering
BMCE06 Remote Sensing
BMCS01Computer Scienceand Engineering
B.E./B.Tech. in CS&E with First Class or,MCA/B.E/B.Tech in any branch with valid CS GATEscore
BMEE01
ElectricalEngineering
CommunicationDegree in B.E./B.Tech. in Electrical Engineering,Electronics, Telecommunication Engg., Instrumentation,Computer Science, computer Science & Engg.,Computer Engg., Biomedical Engg.,With minimum of 60% marks/1
st
BMEE02
class or equivalent
Control and Computing
BMEE03 Power Electronics and Power Systems
BMEE04 Microelectronics
BMEE05 Electronic Systems
BMME01
MechanicalEngineering
Thermal and fluids Engineering First class degree (with 60% minimum; 55% for SC/ST)in Mech./ Aerospace Engg./Chemical Engg.
BMME02
Design Engineering First class degree (with 60% minimum; 55% for SC/ST)
in Mechanical Engg./ Aerospace Engg.
BMME03Manufacturing Engineering First class degree (with 60% minimum; 55% for SC/ST)
in Mech./Prod./ M/c Tool/Industrial Engg.
BMMM01
MetallurgicalEngineering andMaterials Science
Materials Science and Engineering Bachelors Degree in Metallurgical ceramic, Chemical,Electrical, Electronics, Electro-chemical, Mechanical,Engineering Physics or M.Sc. in Chemistry, Physics orMaterials Science or M.Sc. Applied Physics.
BMMM02Process Metallurgy
Bachelors Degree in Metallurgical Chemical,Electrochemical, Mech. Engineering, Materials Science,Production Engg.
-
8/2/2019 Qip Brochure 2010 Mtech1
16/39
16
Code DepartmentFields of
SpecializationMinimum Qualification
BMBM01 Biosciences andBioengineering
Bioinstrumentation,Biomaterials &Artificial Organs,Biomedical sensors,Bionanotechnology,ComputationalNeuroscience,Detection &
Treatment ofCancers, DrugDelivery Systems,Medical Image &Signal Processing,MathematicalModeling,NeuromuscularPhysiology,Telemedicine
(i) B.Tech/B.E in Biomedical, Chemical Computer Science, Electrical,Electronics, Telecommunications, Instrumentation, MechanicalEngineering, and Material Sciences and Engineering Physics.(ii) M.Sc. or equivalent in Biochemistry, Biophysics, Biotechnology,Ceramics, Chemistry, Electronics, Ergonomics, Materials Science,Mathematics, Molecular Biology, Physics and Physiology.(iii) M.B.B.S(iv) M.Pharm.(v) B.Pharm, BDs, BVSc degree (duration 4 years and more)
Eligibility/ rank certificates are required for all such entrance examinations.All India level pre-MDS/ MVSc selection examination for BVSc, BDs &B.Pharm candidates.
Written Test and Interview
Prospective candidates called for the interview will be required appear in awritten test in the morning of the first day of the interview. The writtenexamination, of 1-2 hours duration, will be conducted in Mathematics (forcandidates with a Medical / Pharmacy / Life Sciences background) andBiology (for candidates with a Engineering / Physical/ Chemical sciencesbackground). The syllabi for the tests will be in accordance with the 12
th
standard syllabi of CBSE.
BMCO01Corrosion Scienceand Engineering
Corrosion Sc & Engg, Met. Engg., Chemical Engg., Mech.
Engg, Chemistry, Materials Science & Engg., MechanicalEngg.
B. Tech (Metallurgical Engg.)B.Tech (Materials Science)
M.Sc. (Chemistry) with Maths atB.Sc. LevelB.Tech. (Mechanical)
BMEN01 Department ofEnergy Science andEngineering
M.Tech in EnergySystems Engineering
Energy Efficiency/ Improvements in conventionalEnergy Systems: Heat pumps, Energy integration, Processintegration for resource optimization, Pinch Analysis-Development of techniques for optimization of Utilitysystems, Demand Side Management/ Load Management inthe Power Sector, Variable Speed Drives, Power Generationand Systems Planning, Energy Management and Auditing,Efficient Motor Drive Systems, Electronics Ballasts, StaticVAR compensators, Illumination control, Power Electronicsin Energy Efficient Systems, Electric Vehicles, Boilers andFluidised Bed Combustion, Exhaust Heat Recovery,Cogeneration, Building Energy Management, Efficient AirConditioning Systems, Hydrogen Generation and Storage,
Fuel Cells.
Renewables: Biomass Gasifier Design, Development andTesting, Pyrolysis for liquid fuels and chemical, CNG Kitdevelopment, Testing of Solar Collector and systems,Passive Solar Architecture, Development of Carbon PV cell,Decentralised Power Systems-Grid Integration Issues,Hybrid Systems for Rural Electrification, Wind Energy, LowCost Solar Drier, Fuel Cells, Thin film solar cells, Carbonnano tubes for hydrogen storage, Solar photovoltaicconcentrator, Development of Engines for SVO, Biodiesel,Dual fuelling etc., Biodiesel manufacturing process.
Clean coal Technologies: (UCG, Chemical Looping,Combustion) Co2
requestrations.
Nuclear: Nuclear Safety, Nuclear Waste management,Thermal Hydraulics Research, Computer Simulation Modelsfor Analysis of Transients in Pressurised Heavy WaterReactor.
Candidates with a bachelors degree inMechanical, Electrical, Chemical,Energy Systems, Thermal Power,Automobile, Aerospace, Aeronautical,Metallurgical or Civil Engineering.
BMEV01 EnvironmentalScience andEngineering
Environmental Monitoring, Industrial Air & Water PollutionControl, Solid and Hazardous Waste Management, Air &Water Quality Modeling, Environmental SystemsOptimization, Environmental Microbiology & Biotechnology,Indoor Air Quality, Aerosol Science and Technology,Environmental Impact Assessment and Global Issues.
Bachelor of Engineering degree inAeronautical / Aerospace, Agricultural,Chemical, Civil, Energy, Biotechnology,Environmental, Mechanical,Metallurgical, Mining, Production,Petrochemical Engineering, or a Masterof Science degree (with Mathematics atthe class XII level) in AtmosphericScience, Biochemistry, Biotechnology,Chemistry, Earth Sciences,Environmental Toxicology,Environmental Sciences, Life Sciences,Meteorology, Microbiology andPhysics.
-
8/2/2019 Qip Brochure 2010 Mtech1
17/39
17
Code Department Fields of SpecializationMinimum
Qualification
BMIO01 Industrial Engineeringand OperationsResearch
The specific problems of research interests include: production planning,scheduling and control systems; management of inventories in production,distribution and service systems; industrial scheduling, facilities planning,project management, quality management, materials management andproductivity management; operations planning and control related to CMS,MRP, ERP, flexible assembly, FMS, JIT; Supply chain analysis, reverselogistics, closed-loop supply chains and RFID applications, product varietymanagement
Operations Research applications in management of technology and resourceallocation; convex optimization; mixed-integer programming; Markov decisionprocesses; optimal control in deterministic and stochastic systems; (differential)game theory; applications of game theory; modeling and simulation of supplychains, manufacturing and service systems; theory and applications ofdistributed and hybrid simulations, discrete event and system dynamicssimulations; applied stochastic models; scheduling and control of railways andother transport operations; time tabling of services, crew and vehiclescheduling for transport operations; optimization and design problems arisingfrom e-commerce, including auctions and mechanism design for electronicexchanges; risk analysis and contract design; revenue management;quantitative models for financial engineering. Theory and applications of neuralnets and fuzzy systems inmanufacturing and management; development and applications of moderninformation systems for managing manufacturing, supply chain and serviceorganizations
The IEOR programme is unique in its contemporary flavour, with new coursesin Financial Engineering, Supply Chain Management, Game Theory, Markovdecision process, System Dynamics, Neural Networks and Fuzzy Logic,Services Management, Manufacturing systems to name a few. Theprogramme is equally strong in background building, with updated courses inOptimization Techniques, Stochastic Models, Simulation, and Knowledge-based systems.
Candidates having afirst class Bachelor'sdegree in any branchof Engineering withvalid GATE Score inany discipline areeligible to apply.
BMSC01 Systems & ControlEngineering
Theory: Large Scale Systems, Nonlinear SystemDynamics and Control, Optimization, Optimal andRobust Control, Reliable Computing with intervalmethods, Sliding Mode Control, System Identification.
Application: Aerospace Systems, EmbeddedComputing and Control (DSP and FPGA based),Chemical Process Systems, Electrical Machines, GasTurbine Systems, Mechatronics and Mechanical
Systems, Nuclear Reactors, Robotics andUnderactuated Systems.
Candidates having a Bachelors Degree inAeronautical / Aerospace / Chemical /Electrical / Electronics / Instrumentation /Mechanical / Metallurgical Engineering.
Candidate Should have undergone a basiccourse in classical control at theirundergraduate level and, also be involved inteaching courses related to Systems and
Control in their college.
-
8/2/2019 Qip Brochure 2010 Mtech1
18/39
18
3. Indian Institute of Technology Delhi -DL
In all cases, the minimum eligibility is a graduate degree in Engineering/Technology in the specified field with a minimum of 60% marks (6.75CGPA) in aggregate (of all the year / semesters of the qualifying examination) or equivalent grade point average (as determined by IIT Delhi).For SC/ST/PD category candidates the minimum performance in the qualifying degree is relaxed from 60% to 55% (6.75 to 6.25 CGPA).
Code Department/Centre Fields of specialization Minimum Qualification
DLAM01 Applied Mechanics Engineering Mechanics, Design Engineering.Aeronautical, Civil, Mechanical, Design,Metallurgical or Production Engineering
DLEN01Centre for EnergyStudies
Energy studies and Energy and EnvironmentManagement.
B.Tech in Electrical/ Electronics, Mechanical, Civil,
Chemical, Agricultural Engineering, Architecture orM.Sc. in Physics or Chemistry, Energy/Environment Engineering, Instrumentation &Control.
DLPS01Centre for PolymerScience & Engineering
Polymer Science & Technology
Bachelor of Technology in Polymer Science &Engineering, Plastic & Rubber Technology,Mechanical Engineering, Chemical EngineeringMasters in Chemistry, Physics.
DLCH01 Chemical EngineeringAll topics in Chemical Engineering, leading toProcess Engineering and Design
Chemical Engineering
DLCE01
Civil Engineering(Code no. of the
specialization to beindicated in the datasheet)
Construction Engineering and Management Civil Engineering or Architectural Engineering
DLCE02 Environmental Engineering & ManagementCivil Engineering, Chemical Engineering,Biochemical and Biotechnology, EnvironmentalEngineering.
DLCE03 Rock Engineering & Underground Structures Civil or Mining Engineering
DLCE04 Geotechnical & Geo-environment Engineering Civil Engineering
DLCE05 Structural Engineering Civil Engineering
DLCE06 Transportation Engineering Civil Engineering
DLCE07 Water Resources Engineering Civil or Agricultural Engineering
DLCS01Computer Science andEngineering
Computer Science & EngineeringComputer Science ( 70% or 7.5 CGPA in B.E./B.Tech/ M.Sc., M.C.A. after B.Sc. withmathematics)
DLEE01 Electrical Engineering
Communication Engineering, ComputerTechnology, Control and Automation, ElectricalMachines and Drives, Integrated Electronicsand Circuits, Power Electronics Power Systems.
BE or B.Tech. in Electrical Engineering/ ElectronicsEngineering/ Electronics & CommunicationEngineering/ Computer Science & Engineering, orEquivalent for IEC add Electrical and Electronics,Electronics & Instrumentation, M.Sc. Physics /Electronics.
Opto-electronics and Optical Communications(Jointly run by the Department of ElectricalEngineering & Physics)
BE or B.Tech in Electrical Engineering/ ElectronicsEngineering/ Electronics & CommunicationEngineering or M.Sc. (Physics).
DLTR01
Industrial TribologyMachine Dynamics &MaintenanceEngineering
Industrial Tribology and MaintenanceEngineering
Mechanical Engineering/ Agricultural Engineering/Automobile Engineering/ Marine Engineering/Mining/ Production/ Manufacturing Science andIndustrial Engineering.
DLMA01 Mathematics Computer Application
Any branch of Engineering, Masters degree inMaths, Statistics, Operations Research, ComputerApplications, Information Technology, Physics,Meteorology.
DLME01MechanicalEngineering
Design of Mechanical Equipment
Aeronautical/ Agricultural/ Auto-mobile/ Mechanical/Production/ Manufacturing Science & Engineering/Textile Engineering/ Technology/ EngineeringPhysics.
Industrial Engineering Any Engineering Discipline.
Production Engineering
Aeronautical/ Agricultural/ Auto-mobile/ Industrial/Mechanical/ Metallurgy/ Production/ ManufacturingScience & Engineering/ Textile Engineering/Technology.
Thermal EngineeringAeronautical/ Automobile/ Chemical FoodEngineering Technology/ Mechanical Engineering/Power Plant Engineering/ Engineering Physics.
DLPH01 Physics
1. Solid State Material.2. Applied Optics.3. Optoelectronics and Optical Communications.(Jointly run with Dept. of Electrical Engineering)
M.Sc. Physics or B.Tech/ BE in ElectricalEngineering/ Electronics & Communication,Engineering Physics, Computer Science/ M.Sc.Physics with specialization in Electronics.
DLTX01 Textile Technology
Textile EngineeringBachelors degree in Textile Engineering /Technology.
Fiber Science and TechnologyBachelors degree in Textile Engineering /Technology or Textile Chemical Technology, Fibre
Technology, Chemical Engineering.
-
8/2/2019 Qip Brochure 2010 Mtech1
19/39
19
4. Indian Institute of Technology Guwahati -GW
Relaxation of SC/ST/PD candidates: Eligibility criteria will be relaxed by 5% in percent marks or 0.5 point in CPI in all cases.
Code Department Fields of specialization Minimum Qualification
GWCH01 Chemical Engineering Petroleum Refinery EngineeringBachelor degree in Chemical Engg/Technology with minimum CPI of 6.5 or60% marks.
GWCE01
Civil Engineering
Structural Engineering
Bachelors degree in Engineering/Technology in an appropriate area with aminimum CPI of 6.5/10 or 60% marks
GWCE02Water Resources Engineering andManagement
GWCE03 Geo-technical Engineering
GWCE04 Environmental Engineering
GWCE05 Transportation Systems Engineering
GWCS01Computer Science &Engineering
-
Bachelors degree in Engineering/Technology or equivalent in anappropriate area or M.Sc. (ComputerScience/Information Technology) or MCAfrom a recognized Institution with aminimum CPI of 6.5/10 or 60% marks
GWEC01 Electronics &Communication Engg.
Signal ProcessingBachelors degree in Electrical/ Electronics
Engg. or Equivalent or M.Sc.(Electronics)with a minimum CPI of 6.5 / 10 or 60%marksGWEC02 VLSI
GWME01
Mechanical Engineering
Fluids and Thermal EngineeringBachelors degree in Engineering/Technology in an appropriate area with aminimum CPI of 6.5/10 or 60% marks
GWME02 Machine Design
GWME03 Computer Assisted Manufacturing
-
8/2/2019 Qip Brochure 2010 Mtech1
20/39
20
5. Indian Institute of Technology Kanpur - KN
For eligibility to the M Tech programme, one is required to have passed the qualifying examination, i.e., B. Tech./B. E. or M. Sc. in theappropriate area .
Code Department Fields of specialization Minimum Qualification
KNAE01AerospaceEngineering
Aerodynamics, Flight Mechanics, Propulsion, Structures. Degree in Aeronautical/ Aerospace,Mechanical, Civil, Chemical, or NavalArchitecture Engg., Electronics
KNCH01ChemicalEngineering
Transport Phenomena, Chemical Reaction Engg., AppliedKinetics and Catalysis, Thermodynamics, MembraneSeparation Processes, Process Systems Development,Computer Aided Design, Optimization and Control,Petroleum Engg., Pulp and Paper Tech., Polymer Scienceand Engg., Pollution Control, Unconventional EnergyResources, Safety and Reliability, Dynamics of NonlinearSystems, Zeolite Catalysis, Colloids and Interface Engg.,CFD, Rheology, Non-Newtonian Fluid Mechanics,Nanotechnology, Numerical Methods for Engineers,Mathematical Methods in Chemical Engineering, Modelingand Simulation in Chemical Engineering, ComputationalBiology and Bioinformatics, Modeling and Simulation ofSeparation Processes, Molecular Modeling, Tissueengineering.
First class Degree in Chemical Engg. orequivalent
KNCE01
Civil Engineering(Code No. of thespecialization tobe indicated inthe Data Sheet)
Engineering Geo-sciences (Code :05) a) For Engineering Geosciences,B.Tech./B.E. degree in Civil Engineering/M.Sc. degree in Earth Science streams,M.Sc., degree in other science streams musthave mathematics as one of the subjects atB.Sc. level.
b) For Geoinformatics, B.Tech./B.E. inCivil/Mining/Electrical/Computer Science/Electronics Engg./ Information Technology orM.Sc. degree in Earth Science streams/Geography/ Physics/ Mathematics/Environmental Sciences. Candidates withM.Sc. must have mathematics as one of thesubjects at B.Sc. level
c) For Geotechnical Engg., B.Tech./B.E.degree in Civil Engg.
d) For Structural Engg., B.Tech./B.E. degreein Civil Engg. and some candidates withBachelors degree in Architecture, BuildingConstruction and allied subjects may also beconsidered.
e) For Transportation Engg., B.Tech./ B.E.degree in Civil/ Mechanical/Aerospace Engg.
f) For Hydraulics and Water ResourcesEngg., B.Tech./B.E. degree inCivil/Agriculture Engg. Candidates must havetaken atleast one mathematics course at UGlevel
KNCE02
Geo-Informatics (Code14)
KNCE03 Geotechnical Engineering (Code 08)
KNCE04
Structural Engineering (Code 17)
KNCE05
Transportation Systems Engineering (Code20)
KNCE06
Hydraulics and Water Resources Engg. (Code 11)
KNCS01
ComputerScience andEngineering
Theory: Complexity Theory, Complexity of Numbertheoretic and Algebraic Computations, Logic, QuantumComputingAlgorithms: Deterministic, Parallel, and Approximation inGraphs, Computational Biology, Data Streams, Geometry,Vision, Biometrics.Artificial Intelligence: Machine Learning, LanguageAcquisition, Natural Language Translation, KnowledgeManagement.Software Technology: Software ArchitectureSecurity: Operating Sytems, Network, Infrastructure,Smart-Card, Protocol Design.Compilers: Compilers for High Performance ArchitectureNetworks: Internet Technology, Grid Computing, MobileComputing.Architecture:
VLSI: Design including floor-planning and routing, Testing,Fault Tolerance, Embedded systems (tools and design),
Degree in Computer Science.
-
8/2/2019 Qip Brochure 2010 Mtech1
21/39
21
Code Department Fields of specialization Minimum Qualification
KNEE01ElectricalEngineering
Power and Control (including Power Systems, ControlSystems and Power Electronics & Drives), InformationSystems (including Communications, Telecom Networkingand Signal Processing), Microwaves & Photonics,Microelectronics VLSI and Display Tech., Soft Computing.
Degree in Electrical or Electronics Engg. orequivalent.
KNEM01
EnvironmentalEngg. andManagement
Water Quality & Pollution, Resources Remediation, AirQuality. Pollution, Environmental Management.
A Bachelor's Degree in any branch ofEngg./M.Sc. with Maths at 10 +2 level.
KNIM01
Industrial and
ManagementEngineering
Operations Research, Operations Management,Organization Sciences, E-commerce and E-services,
Knowledge Management, Strategic Management andTechnology Management and Entrepreneurship and anyarea of management.
Degree in any branch of Engg.
KNLS01LaserTechnology
Photonics, Laser Fabrication, Laser Spectroscopy, Opticalcommunication, Non-Linear optics, Laser Plasma &applications, Optical Tomography, Bio-Medical applicationsof Lasers & Laser Material Processing.
Degree in any branch of Engg., preferably inElectronics & Communications, ElectricalEngg, or Mechanical Engg. or M.Sc. Physics.
KNME01MechanicalEngineering
Solid Mechanics & Design, Fluid and Thermal Sciences,Manufacturing Science, Mechatronics.
First class Bachelors Degree in MechanicalEngg.Note: Candidates with first class Degree inProduction Engg. are eligible for admissiononly to Mechatronics or ManufacturingScience.
KNMT01Materials andMetallurgicalEngineering
Modeling and Simulation of Mineral Processes Systems,Fluid Flow, Heat and Mass Transfer in MetallurgicalSystem, Process Design and Development in Extractive
Metallurgy, Simulation of Metallurgical Processes, SteelMaking Injection Metallurgical Process Control and ProcessOptimization, Applications of Artificial Intelligence Methodsin Metallurgical Processes, Electrometallurgy,Electrochemical Cleaning of Soil, Aluminum Electrolysis,Electro-deposition, Physical Metallurgy, Alloy Development,Thermodynamics and Kinetics of Phase Transformations,Heat Treatment, Solidification of Metals and Alloys,Interfacial Processes, Mechanical Processing,Thermomechanical Processing of Steels and TitaniumAlloys, Processing-Structure-Property Relations inMaterials, Intermetallics, Nanostructural Materials,Microstructural Characterization and Stereology, ElectronMicroscopy, Evolution and Characterization of TexturesDuring processing Environmental Degradation of Materials,Materials Hydrogen Interaction, Processing of Powders and
Particles Discrete Element Method (DEM), PowderMetallurgical Processing, Modeling of P/M Processes, SolidState and Liquid Phase Sintering, Structural CeramicsComposite Materials, Metal Matrix Composites, Tribology ofAdvanced Materials, Welding Processes, MagneticMaterials, Electromagnetic Materials and Processing, ThinFilm Technology, Characterization and Applications ofOpto-Electronic Materials and Devices, MaterialsProcessing by Solid State Chemistry, FerroelectricCeramics, Electronic Materials, White Light Illumination,Display Materials and Technologies, Bio-materials.
Degree in Ceramic, Chemical, Materials,Mechanical, Metallurgy or a M.Sc. degree inChemistry, Material Science or Physics withMathematics at the B.Sc. level.
KNMS01
MaterialsScience(Interdisciplinaryprogramme)
Electronic and Optoelectronic Materials /Devices.Advanced ceramics and composites.Nanoscale materials, Nanotubes.Superionic/Fast-ion conductors, solid electrolytes.
Thin films.Magnetic materials.Organic Semiconductors.Piezoelectric and ferroelectric materialsOptical spectroscopyPolymeric materials hydrogen Energy storage materialsMaterials synthesis
B.Tech./B.E./B.Sc. (Engg.) degree inCeramic, Chemical, Electrical, Electronicsand Communication, Materials, Mechanical,
or Metallurgical Engineering/Technology; orany equivalent branch of engineering/technology or Master's degree in Physics,Applied Physics, Chemistry, MaterialsScience with Mathematics and Physics orChemistry at Bachelor's level.
KNNE01NuclearEngineering andTechnology
Computerized Tomography, Reactor Dynamics, TransportTheory, Thermal Fluids Analysis, Instrumentation.
Degree in any branch of Engg.
-
8/2/2019 Qip Brochure 2010 Mtech1
22/39
22
6. Indian Institute of Technology Kharagpur -KH
In all cases the minimum eligibility is degree in engineering with a minimum of 60% marks or equivalent.
Code Department Fields of specialization Minimum Qualification
KHAE01AerospaceEngineering
Aerospace Engg.Degree in Aerospace, Mechanical, Marine Engg./Naval ArchitectureEngg./civil engg.
KHAG01
Agricultural andFoodEngineering
Farm Machinery & Power
Degree in Agricultural Engineering (All Specializations),Biochemical Engg. (KHAG03), Chemical Engg. (KHAG06,KHAG08), Civil Engg. (KHAG02, KHAG05, KHAG06), Food
Technology (KHAG03), Naval Architecture (KHAG06), MechanicalEngg. (KHAG01, KHAG03, KHAG08), Chemical Engineering(KHAG06, KHAG08).
KHAG02 Soil and Water Conservation Engg.
KHAG03 Dairy and Food Engg.
KHAG05Water Resources Development &Management.
KHAG06 Aquacultural Engg.
KHAG07Agricultural Systems &Management.
KHAG08 Post Harvest Engg.
KHBT01 BiotechnologyBiotechnology and BiochemicalEngg.
Degree in Biotechnology/ Biochemical/ Chemical Engg.
KHET01
Centre forEducationalTechnology
Media and Sound Engineering B.Tech in ECE,COMP,EE,INST
KHCE01
Civil Engineering
Hydraulic and Water ResourcesEngg.
Degree in Civil Engg.
KHCE02 Transportation Engg. Degree in Civil Engg.
KHCE03Environmental Engineering &Management
Degree in Civil Engg./Environmental Engg./Chemical Engg.
KHCE04 Geotechnical Engg. Degree in Civil Engg.
KHCE05 Structural Engg.Degree in Civil Engineering
KHCH01ChemicalEngineering
Chemical Engg. Bachelor degree in Chemical Engineering / Chemical Technology.
KHCR01
CryogenicEngineeringCentre
Cryogenic Engg.Degree in Chemical, Mechanical, Engg., or, M.Sc. in Physics orMaterials Science.
KHCS01
ComputerScience and
Engineering
Computer Science & Engineering. Degree in Computer Science & Engg. or Information Technology
KHEC01
KHEC02 Electronics andElectricalCommunicationEngineering
Fiber optics & LightwaveEnggMicro Electronics & VLSI Design.
Degree in Electronics and Electrical Communication Engg.KHEC03 R F & Microwave Engg.
KHEC04 Telecommunication System Engg.
KHEC05Visual Information and EmbeddedSystems Engg.
KHEE01
ElectricalEngineering
Machine Drives and PowerElectronics.
Degree in Electrical (KHEE01-KHEE04), Electronics and Elect.
Communication (KHEE02, KHEE04), Instrumentation (KHEE02,
KHEE04) Engg.
KHEE02 Control System Engg.
KHEE03 Power System Engg.
KHEE04 Instrumentation.
KHIM01
IndustrialEngineering &Management
Industrial Engg. & Management.
Degree in Aerospace, Agricultural, Chemical, Civil, Computer Science,
Electrical, Electronics & Elect. Communication, Energy, Industrial,
Information Technology, Instrumentation, Marine, Mechanical,
Manufacturing, Metallurgical, Mining, Navel Architecture, Production
Engg.
KHMA01 MathematicsComputer Science and DataProcessing.
M.Sc. degree in Mathematics, Physics or Statistics.
KHME01
MechanicalEngineering
Manufacturing Science andEngineering
Degree in Mechanical (all specializations) Aerospace (KHME02,KHME03), Energy (KHME02), Metallurgical (KHME01), Production(KHME01) Engg.
KHME02 Thermal Science and Engineering
KHME03 Mechanical Systems Design
KHMN01 Mining Engg. Engineering
B.E/B.Tech. Degree in Mining Engg.Petroleum Engineering, MineralProcessingMSc Tech ( Applied Geology and Geophysics)MSc Geology and Geo-informaticsMaterials Engg.
-
8/2/2019 Qip Brochure 2010 Mtech1
23/39
23
Code Department Fields of specialization Minimum Qualification
KHMS01MaterialsScience
Materials Science and Engineering
B.Tech/B.E Degree in Chemical Engg./Technology, Ceramic andglass Technology, Materials Technology, Plastic and/or RubberTechnology, Polymer Science and Technology/BiotechnologyWith 60% marks minimum
M.Sc. in Physics, Solid State Physics, Chemistry, MaterialScience, Polymer Chemistry, Electronic Science. With 60%marks minimum
KHMT01Metallurgical andMaterialsEngineering
Metallurgical and Materials Engg.Degree in Metallurgical, Chemical, or Mechanical Engg., orProduction Engg., or Manufacturing Science and Engineering or inGlass and Ceramic or Materials Science/Tech.
KHOE01Ocean Engg. &NavalArchitecture
Ocean Engineering and NavalArchitecture
Degree in Aerospace, Civil, Marine Engg., Mechanical, Ocean Engg,Naval Architecture, Ship-building technology or equivalent.
KHPH02Physics &Meteorology
Solid State Technology
M.Sc(Physics/Applied Physics/Solid State Physics), Bachelor inEngineering Physics/Polymer engineering, M Sc, (PolymerPhysics/Polymer Science), M.Sc.( Electronic Science/MaterialsScience/ Chemistry with Mathematics at the B.Sc. Level), M.Sc,(Applied Optics), Bachelor in Electronics Engg,/Electronics andElectrical Communication Engg.
KHRT01RubberTechnology
Rubber TechnologyDegree in Chemical, Materials, Plastics and/or Rubber, Polymer orTextile Tech., Mechanical or Production Engg., or in Chemistry.
KHID01
Ranbir andChitra GuptaSchool ofInfrastructure
Design andManagement
Infrastructure Design andManagement
B.Tech. in Civil, Electrical, Mechanical or B.Arch./B.Plan.
KHRE01ReliabilityEngineeringCentre
Reliability Engineering
Degree in Electrical Engineering, Electronics & CommunicationEngg, Civil Engineering, Chemical Engineering, Computer Science,Industrial Management, Mechanical Engineering, AerospaceEngineering, Production Engineering, Instrumentation EngineeringManufacturing Engineering, , Information Technology and alliedbranches.
KHIT01School ofInformationTechnology
Information TechnologyB.E/B.Tech. in Information Technology or Computer Sc. & Engg. orElectronics & Electrical Communication Engg. or Electrical Engg.
M.C.P Degree Program
KHAR01Architecture &RegionalPlanning
Master of City Planning
Degree in Architecture (B.Arch.) or Civil Engg.(B.Tech./ BE) orBachelor of Planning (B.Planning). Students with MA/M.Sc. degreein Geography or Economics or Sociology are also eligible for
admission.
-
8/2/2019 Qip Brochure 2010 Mtech1
24/39
24
7. Indian Institute of Technology Madras - MD
The minimum eligibility is a graduate degree with first class or minimum of 60% aggregate marks (or equivalent grade point average) in thecorresponding or specified branch.
Code Department Fields of specializationMinimum Qualification (The candidate should posses the
following degree in B.E./B.Tech or equivalent)
MDAE01AerospaceEngineering
Aerodynamics, Propulsion,Structures
Aerospace Engineering, Automobile Engineering, ChemicalEngineering, Civil Engineering, Computer Science & Engineering,Electronics & Communication Engineering, Electrical & ElectronicsEngineering, Energy Engineering, Instrumentation, MechanicalEngineering, Manufacturing Engineering, Metallurgical Engineering,
Naval Architecture, Production Engineering.
MDAM01AppliedMechanics
Specialization in Solid Mechanics /Fluid Mechanics/BiomedicalEngineering
Aerospace Engineering, Biomedical Engineering, ChemicalEngineering, Civil Engineering, Computer Science & Engineering,Electronics & Communication Engineering, Electrical & ElectronicsEngineering, Energy Engineering, Instrumentation, MechanicalEngineering, Metallurgical Engineering, Naval Architecture.
MDCH01ChemicalEngineering
Transport processes, Processcontrol Biochemical Engg.,Environmental Engg., Materialsand High polymers Engg.
Chemical Engineering, Biochemical Engineering, or EnvironmentalEngineering and Civil Engineering
MDCE01
Civil Engineering
Building Technology &Construction Management
Architecture (B.Arch.), Civil Engineering
MDCE02 Environmental EngineeringAgricultural Engineering, Biotechnology, Chemical Engineering, CivilEngineering, Environmental & Civil Engineering, M.Sc. in LifeScience.
MDCE03 Geotechnical Engineering Civil Engineering
MDCE04Hydraulic & Water ResourcesEngg.
Agricultural Engineering, Civil Engineering, Environmental /Environmental and Civil Engineering
MDCE05 Structural Engg. Civil Engineering
MDCE06 Transportation Engg. Architecture (B.Arch.), Civil Engineering
MDCS01ComputerScience &Engineering
Computer Science & Engineering
B.E. / B.Tech (CS Or IT) or MCA or M.Sc (CS) (OR)B.E/B.Tech in any discipline plus at least three years teaching inCSE/ IT / MCA Departments, and current appointment in one of these
Departments.
MDEE01
ElectricalEngineering
Communication System Electronics & Communication Engineering
MDEE02Power Systems & PowerElectronics
Electronics & Communication Engineering, Electrical & ElectronicsEngineering, Instrumentation
MDEE03 Micro Electronics & VLSI Design Electronics & Communication Engineering
MDEE04 Control and InstrumentationElectrical and Electronics Engineering, Electronics andCommunication Engineering, Control and InstrumentationEngineering.
MDMA01 MathematicsIndustrial Mathematics andScientific Computing
The candidates should possess the following degree in BE / B.Tech.or equivalent in Aerospace Engineering, Chemical Engineering, CivilEngineering, Computer Science & Engineering, Electronics &
Communication Engineering, Electrical & Electronics Engineering,Mechanical Engineering, Metallurgical Engineering, NavalArchitecture
ORM.Sc. in Mathematics
ORM.Sc. in Physics
-
8/2/2019 Qip Brochure 2010 Mtech1
25/39
25
Code Department Fields of specialization Minimum Qualification
MDME01
MechanicalEngineering
Thermal Engg. Stream:
(Combustion & Propulsion, Heat
Transfer & Thermal Power, I.C.
Engines & Gas Turbines,
Hydroturbomachines,
Refrigeration & Air Conditioning,
Thermal Turbomachines)
(The candidate should posses the following degree in B.E./B.Tech. orequivalent)
Aeronautical/Aerospace Engineering, Automobile Engineering,Chemical Engineering, Energy Engineering, Mechanical Engineering,Marine Engineering, Petroleum Engineering
MDME02
Design Stream:
(Mechanical Design, CompositesTechnology)
(The candidate should posses the following degree in B.E./B.Tech. orequivalent)
Aeronautical/Aerospace Engineering, Automobile Engineering,Mechanical Engineering
MDME03
Manufacturing Engg. Stream:
(Manufacturing and Precision
Engineering)
(The candidate should posses the following degree in B.E./B.Tech. orequivalent)
Aerospace Engineering, Automobile Engineering, Computer Science& Engineering, Electronics & Communication Engineering, Electrical& Electronics Engineering, Industrial Engineering, Instrumentation,Mechanical Engineering, Manufacturing Engineering, Machine ToolEngineering, Naval Architecture, Production & Industrial Engineering,Production Engineering
MDMM01Metallurgical &MaterialsEngineering
Metallurgical & MaterialsEngineering
Mechanical Engineering, Metallurgical Engineering, ProductionEngineering
MDOE01
OceanEngineering
Ocean Engineering
Aerospace Engineering, Civil Engineering, Marine Engineering,Mechanical Engineering, Naval Architecture Or any other appropriateengineering disciplineORM Sc in Physics, Mathematics, Statistics and Oceanography
MDOE02 Petroleum Engineering
Chemical Engineering, Civil Engineering, Marine Engineering,Mechanical Engineering, Naval Architecture, Petroleum EngineeringOr any other appropriate engineering disciplineORM Sc in Physics, Mathematics, Statistics Oceanography, Geologyand Geophysics
MDPH01 Physics Solid State Technology
Electronics & Communication Engineering, Electrical & ElectronicsEngineering, Metallurgical Engineering. M.Sc. Materials Science(Electronics background), M.Sc. Mathematics, M.Sc. AppliedMathematics, M .Sc. Physics, M.Sc. Applied Physics.
-
8/2/2019 Qip Brochure 2010 Mtech1
26/39
26
8. Indian Institute of Technology Roorkee RR
Minimum qualification for candidates of general category seeking admission to the PG programme must have at least 60% marks or 6.00CGPA on a 10 point scale at qualifying degree level. For SC/ST/PD category candidates this percentage is 55% or 5.50 CGPA on a 10 pointscale. The percentage of marks will be considered as aggregate awarded in qualifying degree examination.
Code Department Fields of specialization Minimum Qualification
RRAH01Alternate Hydro EnergyCentre
Alternate Hydro Energy Systems
A recognized Bachelors Degree in Civil / Electrical/Mechanical/ Industrial / Chemical / Electronics /Computer/ Agricultural / Environmental Engineering or itsequivalent including AMIE from Institution of Engineers
(India) qualification.
Environmental management ofRivers and Lakes
A recognized Degree in Civil / Electrical / Mechanical /Industrial / Chemical / Agricultural / EnvironmentalEngineering / Architecture / Planning / Biotechnology orequivalent at the Bachelors level including AMIEexaminations of the Institute of Engineers.
ORMaster Degree in Science with Mathematics atgraduation level (limited to 30% of total seats).
RRAR01Architecture andPlanning
M.Arch. B.Arch or its equivalent.
M.U.R.P.B.Arch or its equivalent. or Bachelor Degree in CivilEngg.
RRCH01 Chemical Engineering
Computer Aided Process PlantDesign.
Bachelors Degree in Chemical / Biochemical / Pulp &Paper / Chemical Technology / Petrochemical / PolymerTechnology / Petroleum Refining, or its equivalent.
Industrial Pollution Abatement.Bachelors Degree in Chemical / Pulp & Paper / Civil /Mechanical/ Biochemical / Petroleum / EnvironmentalEngg. / Chemical Technology, or its equivalent.
Industrial Safety & HazardsManagement
Bachelors Degree or its equivalent in any discipline ofEngineering.
RRCE01
Civil Engineering
(Code no. of thespecialization to be
indicated in the datasheet)
M.Tech. Building Technology
Bachelors degree in Civil Engineering/StructuralEngg./Construction Tech. or its equivalent. B.Arch.(Maximum of three candidates with Architecture degreewill be admitted to this program)
RRCE02 M.Tech. Computer Aided Design Bachelors degree in Civil Engg., or its equivalent.
RRCE03 M.Tech Environmental Engg.Bachelors degree in Civil Engg./ChemicalEngg./Environmental Engg., or its equivalent.
RRCE04 M.Tech Geomatics Engg.
Bachelors degree in Civil Engg./ElectronicsEngg./Electrical Engg./Computer Science/InformationTechnology /Marine Engg./Mining Engg./Architecture, or itsequivalent.
RRCE05M.Tech Geotechnical Engg.
Bachelors degree in Civil Engg./Mining Engg., or itsequivalent (Diversification to Rock Mechanics Programmis also available. Mining Engineering Graduates with amaximum number of four will be admitted to thisprogramm only.)
RRCE06 M.Tech. Hydraulic Engg.Bachelors degree in Civil Engg./MechanicalEngg./Chemical Engg./Agricultural Engg., or itsequivalent.
RRCE07 M.Tech. Structural Engg.Bachelors degree in Civil Engg./Structural Engg., or itsequivalent. (Diversification to Bridge Engg. Programm isalso available.)
RRCE08 M.Tech. Transportation Engg. Bachelors degree in Civil Engg., or its equivalent
RRCY01 Chemistry Advanced Chemical AnalysisB. Tech. (Chemical Engg.) / M.Sc. (Chemistry) / M.Sc.(Environment Science), or its equivalent.
RREQ01Earthquake Engineering
Soil Dynamics.
Bachelor's degree in Civil Engg. / Structural Engg or its
equivalent.
RREQ02 Structural DynamicsBachelor's degree in Civil Engg. / Structural Engg /Mechanical Engg., or its equivalent
RREE01
Electrical Engineering
Instrumentation & SignalProcessing
Bachelors Degree in Electrical Engg. / Electronics &Communication / Instrumentation Engg., or itsequivalent.
Systems & ControlBachelor Degree in Electrical Engg. or Electronics &Communication / Instrumentation Engg., or itsequivalent.
RREE02
Power System Engg., Bachelor Degree in Electrical Engg. or its equivalent.
Electric Drives & Power Electronics Bachelors Degree in Electrical Engg. or its equivalent.
-
8/2/2019 Qip Brochure 2010 Mtech1
27/39
27
Code Department Fields of specialization Minimum Qualification
RRLC01Electronics and
Computer Engineering
Communication SystemsBachelors Degree in Electronics & CommunicationEngg. or its equivalent
RF & Microwave Engg.Bachelors degree in Electronics and CommunicationEngg. or its equivalent
Microelectronics & VLSIBachelors degree in Electronics & CommunicationEngg. or its equivalent .
System Modeling & ControlBachelors degree in Electronics & CommunicationEngg. / Electrical Engg. or its equivalent
Computer Sc. & EngineeringBachelors degree in any branch of Engg./Tech. or M.Sc.in Electronics / Computer Science / Physics /Mathematics / Statistics or MCA.
Information TechnologyBachelors degree in any branch of Engg./ Technology orM.Sc. in Electronics / Computer Science or MCA
RRHY01 Hydrology Hydrology
(i) Bachelor's degree in Civil / Mechanical / AgriculturalEngg. / Hydrology or its equivalent qualification.
ORM.Sc. / M.Tech (Masters) degree in Chemistry / Geology/ Geophysic