q-tdpm touchdown circle lighting · the core of the q-tdpm are the leds which are designed with...

Product Code Conﬁguraon Code Order Code → Q64 RI 03 - YG 11 - 10 - … P r o d u c t N a m e Q64 Q-TDPM System M o u n t i n g RI Rigid Z o n e 03 Safe Area C o l o r YG Yellow/Green I n p u t P o w e r 11 100-240 Vac F i x e d D i g i t 10 - D - V a l u e 912 D-Value 12 913 D-Value 13 914 D-Value 14 915 D-Value 15 916 D-Value 16 917 D-Value 17 918 D-Value 18 919 D-Value 19 920 D-Value 20 921 D-Value 21 922 D-Value 22 923 D-Value 23 924 D-Value 24 .98" (25) Q-TDPM Touchdown Circle Lighting Our low-profile lighting system outlines the Touchdown/ Positioning Marking (TD/ PM) Circle and H of offshore helidecks with yellow and green lights. It consists of a concentric circle of at least 16 discrete lighting segments. The elements have a width of 3.9" (100mm). A single circle is positioned at the mean radius of the painted circle of the helideck. The lighting segments provide coverage between 50% and 75% of the circumference as stated in CAP437, and are equidistantly placed with the gaps between them not less than 1.64' (0.5 m). The mechanical housing is powder-grip-coated yellow. Q-TDPM System Technical Specifications • Product Code: Q64RI03 • Application: Helideck (Rigid) • Light Color: Yellow & Green • Light Source: LED • Dimensions: 1 Circle unit: 49.2" x 4.72" x .98" (1250 x 120 x 25 mm); 1 Letter H unit: 29.5" x 4.72" x .98" (750 x 120 x 25 mm) • IP-index: IP67 • Enclosure: Aluminium, (Grip) powder coated • Mounting: Bolt on/Pre assembled • Input Voltage: 200-240 Vac • Cable: H07RN-F 3x1 Operation The industry standard is below .98" (25mm). This allows option- al mounting plates to not interfere with the compliance to the CAP437 regulation. The core of the Q-TDPM are the LEDs which are designed with special side-emitting technology requested by the TD/PM in accordance to CAP437. The LEDs used in the Q-TDPM system have a high lifetime of 75,000 hours. The side emitting LEDs will provide an optimal beam in the lower angles in azimuth, in such a way that the Q-TDPM is vis- ible from every gliding slope on the approach path. Side emitting LED Multiple bolting positions Below .98" (25) height Flight Light Inc., 2708 47th Ave. Sacramento, CA, 95822, USA Product specifications may be subject to change without prior notice. Verify current specifications when ordering. © Flight Light Inc. | 1/10/2018 www.flightlight.com [email protected] +1.800.806.3548 US & Canada +1.916.394.2800 Worldwide +1.916.394.2809 Fax TD/PM CIRCLE & H LIGHTS

Upload: lyphuc

Post on 24-Nov-2018

215 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: Q-TDPM Touchdown Circle Lighting · The core of the Q-TDPM are the LEDs which are designed with special side-emitting technology requested by the TD/PM in accordance to CAP437. The

Product Code Configuration Code

Order Code → Q64 RI 03 - YG 11 - 10 - …

Product Name

Q64 Q-TDPM System

MountingRI Rigid

Zone03 Safe Area

ColorYG Yellow/Green

Input Power11 100-240 Vac

Fixed Digit10 -

D-Value912 D-Value 12

913 D-Value 13

914 D-Value 14

915 D-Value 15

916 D-Value 16

917 D-Value 17

918 D-Value 18

919 D-Value 19

920 D-Value 20

921 D-Value 21

922 D-Value 22

923 D-Value 23

924 D-Value 24

.98"(25)

Q-TDPM Touchdown Circle LightingOur low-profile lighting sys-tem outlines the Touchdown/Positioning Marking (TD/PM) Circle and H of offshore helidecks with yellow and green lights. It consists of a concentric circle of at least 16 discrete lighting segments. The elements have a width of 3.9" (100mm). A single circle is positioned at the mean radius of the painted circle of the helideck.

The lighting segments provide coverage between 50% and 75% of the circumference as stated in CAP437, and are equidistantly placed with the gaps between them not less than 1.64' (0.5 m). The mechanical housing is powder-grip-coated yellow.

Q-TDPM System Technical Specifications• Product Code: Q64RI03• Application: Helideck (Rigid)• Light Color: Yellow & Green• Light Source: LED• Dimensions: 1 Circle unit: 49.2" x 4.72" x .98" (1250 x 120

x 25 mm); 1 Letter H unit: 29.5" x 4.72" x .98" (750 x 120 x 25 mm)

• IP-index: IP67• Enclosure: Aluminium, (Grip) powder coated• Mounting: Bolt on/Pre assembled• Input Voltage: 200-240 Vac• Cable: H07RN-F 3x1

OperationThe industry standard is below .98" (25mm). This allows option-al mounting plates to not interfere with the compliance to the CAP437 regulation.

The core of the Q-TDPM are the LEDs which are designed with special side-emitting technology requested by the TD/PM in accordance to CAP437. The LEDs used in the Q-TDPM system have a high lifetime of 75,000 hours.

The side emitting LEDs will provide an optimal beam in the lower angles in azimuth, in such a way that the Q-TDPM is vis-ible from every gliding slope on the approach path.

Side emitting LED Multiple bolting positions

Below .98" (25) height

Flight Light Inc., 2708 47th Ave.Sacramento, CA, 95822, USA

Product specifications may be subject to change without prior notice. Verify current specifications when ordering. © Flight Light Inc. | 1/10/2018

www.flightlight.com [email protected]

+1.800.806.3548 US & Canada+1.916.394.2800 Worldwide+1.916.394.2809 Fax

TD/PM CIRCLE & H LIGHTS

Page 2: Q-TDPM Touchdown Circle Lighting · The core of the Q-TDPM are the LEDs which are designed with special side-emitting technology requested by the TD/PM in accordance to CAP437. The

.67"(17)

2.17" (55)

Q-Cable Ducting System Technical Specifications• Product Code: Q64RI03 (Q-TDPM System)• Application: Helideck (Rigid)• Light Color: Black, Rubber• Dimensions: 2.17" x .67" (55 x 17 mm)(Width x Height)• Material: SEBS 80° +/-5° Shore• Mounting: Bolt on/Brackets• Cable: H07RN-F 3x1

Cable Ducting AssemblyThe TD/PM Circle is superimposed on the yellow painted mark-ing. It comprises a concentric circle of at least 16 discrete light-ing segments. The elements have a width of 3.9" (100mm). A single circle is positioned at the mean radius of the painted circle of the helideck. The lighting segments are connected with each other by marine grade cables that are sealed in the Q-Cable Ducting System.

OperationThe Cable Ducting System is mounted on the preassembled cable ducting brackets that are included on every system or parts of the Q-TDPM System. The rubber material of the Q-Cable Ducting System provides resistance of load and impacts and maintains the safety of the cable and passengers.

Flight Light Inc., 2708 47th Ave.Sacramento, CA, 95822, USA

Product specifications may be subject to change without prior notice. Verify current specifications when ordering. © Flight Light Inc. | 1/10/2018

www.flightlight.com [email protected]

+1.800.806.3548 US & Canada+1.916.394.2800 Worldwide+1.916.394.2809 Fax

TD/PM CIRCLE & H LIGHTS