Made in the U.S.A.

Detalier Cub Galaxy Renaissance Super Pro

Pyrography: The art or process of producing designs on wood, or other material using heated tools or a fine flame.

Since 1979 Colwood has supplied the art world with professional, affordable wood-burning tools and accessories. With a choice of five control units and over 100 variations of 40 tip styles, Colwood can satisfy any skill level, budget, or pyro-graphic need. No longer the sole province of duck and bird carvers, woodburning tools are now being used by everyone from the stamp artist to the leather worker. New materials, such as vellum, ivory, bone, eggshell, gourds, card stock, x-ray film, cork, and of course wood, work well with Colwood tools. Colwood now stocks unfinished wood products. All of these products are made from softer, light grain woods that are suitable for burning and decorating. These boxes make great gift ideas for people of all ages. Visit our web site at www.woodburning.com/woodburning.asp and click on “Unfinished Wood Prod-ucts” to see what is available.

Burning your piece adds a unique dimension; the burned piece has more depth than if the pieces were merely painted. The picture of the owl on the left is an example of a woodburning that was also colored in. Woodburners are also very popular with gourd artists. Some gourds are very hard and re-quire a woodburner with more power; we recommend using a heavy duty cord for generating this extra power.

Each of our products has been developed with the customer in mind. Using input from world class artists, we created and tailored our products to satisfy your most meticulous needs. Thus, Colwood tools are precise, easy-to-use, and cost effec-tive. All our units are manufactured right in our factory in order to provide the best possible service. Colwood also offers a full line of accessories, as well as books and instructional materials on carving and burning. Our staff is knowledgeable and friendly, so feel free to give us a call for additional information or any questions or concerns that you may have. If you have access to the Internet, please visit our web site at www.woodburning.com.

Colwood 44 Main Street

Farmingdale, NJ 07727 Tel: 732.938.5556 Fax:732.938.9037

www.woodburning.com

Great Blue Heron

How Woodburning Units Work Virtually all of the modern woodburning units are constructed in the same manner. A transformer provides the power and is controlled by a device not unlike a light dimmer that passes the power to a handpiece cord where a burning pen and tip are attached. The trans-former’s purpose is to step down the voltage to a useable level that is regulated by the controller that passes the power through the cord to the handpiece and tip.

The Wattage Controversy There has been a lot of misleading information concerning watt-age on woodburning units. Many manufacturers make high watt-age claims that are false. We have tested many of these units and have found that they all consume less than 45 watts of power, including the units claiming to deliver 130 watts max. Simply put, wattage is power; and generally speaking, more is better than less. The logical question to ask is, “How much wattage do I need?” To answer this, we conducted an experiment in our shop using a wattmeter (a device that measures power consumption), a Detailer with 18 gauge cord, and a “K” tip (small point). Several lines were burned with the Detailer’s control knob set to 5. We were able to burn nice, crisp “toast” colored lines-- the wattmeter registered 15 watts! Next, we set the Detailer to full power. The “K” tip glowed a bright orange, ignited the wood, and burned thick, charred lines lacking the fine detail that artists require. The wattmeter registered 27 watts. With respect to woodburning, we feel that wattage rating is severely overrated. You should chose a woodburner that has the features that you require, and a price tag that fits your budget. Colwood’s wide selection of control units, and handpiece cords make it easy for you to accomplish this while satisfying all your artistic needs.

Heat Setting of 5

“K” Tip

Heat Setting of 10

“K” tip glowing with Detailer set to max power

Learn to Burn “Learning the Art of Pyrography”

By Al Chapman

• Methods of transferring a pattern • How to add depth • How to make realistic fur • How to add shadows • How to add highlights

“Gourd Pyrography” By

Jim Widess

“Pyrography Workbook” By

Sue Walters

An exciting publication displays works by 55 artists in 444 color photographs of gourds including step-by-step photo-graphic instructions, showing three different pyrographic tools. Included is an appendix with 74 color photographs of individual pyrographic tool tips.

This classic by Sue Walters includes: • 3 step projects for beginners, intermediate

and advanced students • In depth instruction on creating animal fur,

feather and eyes—plus simple ways of burning natural objects, water, trees, bushes, rocks and grass

• Methods for burning onto wood, leather, paper, bark and antlers

• History, work area, and safety included

New From Colwood Pyrography Workshop DVD by Sue Walters

Watch and follow along as Sue Walters demonstrates how to create a bird portrait in high realism from pattern to finished picture. A complete instructional DVD workshop including: • 1 hardcopy outline pattern • 1 hardcopy texture map • 1 hardcopy full color picture • 2 DVD Set

Over 85 minutes One on One Training Bonus 20 minute chapter—An introduction to Burning including Tips and Techniques, a How To Guide, and a Guide to Trouble-shooting

The Art of Pyrography By Nedra Denison

Sally’s Artist Graphite and Transfer Paper

Use Sally's WAX FREE Artists Graphite Pa-per to transfer your design from a pattern, sketch, template or free-hand onto ANY surface: paper, wood, fabric, can-vas, metal, glass, tile, ceramic, etc. Sally's leaves no wax residue, so the transfer line can be erased like pencil with any eraser; it can be washed off ceramic, glass, tile and metal. Sally's can be washed out of fabric and a hot iron will NOT set the transfer lines as with other tracing or transfer papers

Sue Walters Complete Woodburning Kits Five Kits Available:

• Chickadee and Pine • Chipmunk on Rock • Loon on Water • Peregrine Falcon • Portrait of Tiger

Each Kit Contains: • Full step by step instruction

manual (18 pages) • One piece of select basswood • One additional loose leaf pattern • One piece of graphite transfer

paper • One piece of 400 grit sandpaper

Kits available with or without woodburner

Craft Burner Tip Package

This Tip Package contains 19 different tip designs and styles. Typically used for shading, drawing, stamping, transferring, stamping and writing on wood and leather. IMPORTANT: These tips can only be used with the Colwood Craft Burner #CCB25.

FREE tutorial on using Colwood’s woodburning tools

www.woodcarvingillustrated.com/forum/f58/acorn-wip-14232/

Floyd Scholz Comfort Band

"The Ar t o f Py rography , Taking woodburn ing to new l imi t s" covers new and fun things you can do with a woodburner. She includes step-by-step projects burning on gourds and maple burls. There is a gallery of burnings done on unique canvas’ such as paper, tagua nuts, leather, gourds, maple burls, canvas and more. Nedra includes information on each with tips for burning on the various materials in the book. There is a whole world of unique and fun things to burn! The book also contains patterns and a gallery of work on unique materials from some of Nedra's friends. We’re taking woodburning to new limits and so can you. It’s not just “woodburning” anymore, it’s pyrography and you can experience the thrill of creating unique one of a kind pyrographic art as well!

New Ball Stylus Tips These new ball tips are great for cursive writing, line, burning on tagua nuts and other miniatures and a multitude of other uses. It glides over the wood to make writing with this tool a snap. Be-cause of its small size it is welded to the wire-rather than having a wire run through it. Available in three sizes: 1mm, 1.6mm, 2.3mm.

Developing a clean, consistent and lyrical burning style is essential in replicating subtle nuances. Translating this to a wood surface requires that thousands of fine lines must be etched in over the course of days and sometimes weeks. Determination and an ability to stay focused are key factors in seeing your work of art through to a suc-cessful conclusion. The nemesis of the pyrographer is repetition. This can become a serious, and painful problem unless proper precautions are taken. Tendonitis, Carpal Tunnel Syndrome and muscle strain are common symptoms, which dedicated pyrographers must be aware of and frequently must cope with. The subtle weight and pull of an electric cord, no matter how light and thin, can over time, create severe strain on fingers, wrist and forearm. Fatigue and pain are often unwelcome by-products of countless hours spent wood burning. With input from World Champion Carver, Floyd Scholz, Colwood has developed the Floyd Scholz Comfort Band to alleviate this dreaded problem. The FSCB fits easily around your forearm and gently holds the handpiece cord in place and prevents the constant tugging and pulling on the fingers and wrist.

The Renaissance The Renaissance is a woodcraftsman’s work station comprised of a woodburning system and high speed grinding and texturing system all in one unit. The woodburning system and grinding system are operationally independent with separate on-off switches and can be used by two operators simultaneously if desired. The Renaissance’s compact and multifunctional design (7 1/2”L x 5 1/4”W x 3 1/2”H) provides the carver with greater available work space. Warranty: Controller only—2 Years; Grinder Motor—6 months; Cords—1 Year.

Woodburner Features The “Detail” burning level enables the carver to do fine feather de-tailing with precise temperature control over wide limits. The “Heavy duty” burning level allows for hotter and faster burning, providing a more rapid heat recovery to the tip.

Grinder Features • Speeds up to 35,000 rpm • Soft Start

The motor starts up slowly which increases it longevity. Unlike other controllers, Colwood’s soft start technology assures that there is no sudden jolting of the handpiece which could cause it to fall from the work area resulting in damage to the motor.

• Soft Reverse The motor can be reversed even when running at its maximum speed without fear of damaging it.

• High Efficiency Power Supply External air is not required for cooling the electronic compo-nents—this allows for a completely enclosed unit which prevents wood dust from entering.

• Power Boost When a load is applied to the motor this is sensed and the power is automatically increased to minimized a decrease to speed.

• Includes One 1/8” collet One 3/32” collet

Warranty Information

Renaissance Controller 2 Years* Renaissance Grinder Motor 6 Months Galaxy 4 Years* Olympiad 2 Years* Super Pro II 2 Years* Detailer 2 Years* Cub 2 Years* All Handpiece Cords 1 Year Fixed Tip Handpieces 3 Months RT Handle 3 Months RT Tips 3 Months

*Does not include handpiece cords, handpieces or tips. These items are covered under a separate warranty.

If any piece of equipment should be in need of repair, do not attempt to repair it yourself. For the warranty to remain valid ALL work must be done in our factory. When sending a unit in for repair please include a brief description of the problem and a daytime phone number.

The Renaissance Workstation

Control UnitsPrecision, Versatility, Control, and Service - Qualities that describe Colwood’s full line ofwoodburning tools and accessories. Colwood offers five control units with their own distinctfeatures to satisfy all skill levels - the novice to the professional artist. Each unit includes a solidstate controller and ultra-flex cord as standard equipment. The “guts” of all our control units arehoused in a sturdy, custom “cold rolled steel” enclosure; not a generic, off-the-shelf, plastic boxsusceptible to melting by misplacing a handpiece, or cracking if accidentally dropped. All ourunits are manufactured and serviced right in our factory. Thus, we can ship virtually everyorder and repair within a 24 hour period.

The GalaxyDigital display (nominal range 0-550) / 55 distinct temperature settings /Circuitry that compensates for fluctuations in line voltage / 3-Pronged ACcord and built-in fuse / Precise, solid state temperature controller / Terminalbarrier for easy replacement of handpiece cord / Separate on-off switch /Clip for mounting handpieces / One ultra-flex cord (18 gauge) / Four yearwarranty / Tip and hanpieces sold separately

The Super Pro IIThe most versatile of Colwood’s line / Selectable front panel switch allow-ing the user to have two different tip styles set up and ready to use / Twohandpiece clips for mounting handpieces / Two terminal barriers for easyreplacement of handpiece cords / Lighted on-off switch / Precise solid statetemperature controller / Highly visible, slanted front panel / One ultra-flexhandpiece cord (18 gauge) / One heavy duty handpiece cord (16 gauge) /Recommended unit for fish carving / Two year warranty / Tips and handpiecessold separately.

The DetailerColwood’s original woodburner / Lighted on-off switch / Precise solid statetemperature controller / Terminal barrier for easy replacement of handpiececord / Clip for mounting handpieces / Tabletop model / One ultra-flex hand-piece cord (18 gauge) / Two year warranty / Tips and handpieces sold sepa-rately

The CubThe smallest and most economical of Colwood’s line / Com-pact and handy for travel / Pilot light / On-Off switch incor-porated into the dial / Precise solid state temperature con-troller / Cable clamp which allows the user to suspend theunit over the work area / One ultra-flex cord (18 gauge) /Two year warranty / Tips and handpieces sold separately

The OlympiadWidest heat range of all our units / Lighted on-off switch / Precise solidstate temperature controller / One ultra-flex handpiece cord (18 gauge)/ Great for heavy insertion work / Ideal for bird carvers, woodworkers,gourd artists, and plaque and sign makers / Two year warranty / Tipsand handpieces sold separately

Accessories #0100 Clip (holds handpieces when not in use)

#0150 Custom Cork

#0151 Custom Cork Heat Shield

#0150F Foam Grip for handpieces

#0155 EZ Tip Puller

#0200 Honing Paper

#0201 Cleaning Cloth (for keeping tips clean)

#0750 18 gauge handpiece cord

#0801 16 gauge handpiece cord

#0802 14 gauge handpiece cord

#0850 Adapter Cord for Detail Master

#0851 Adapter Cord (male x female)

#0852 Razortip Adapter (Colwood tips w/Razortip)

#0860 Plastic Carrying Case

#0866 Wood Carrying Case

#3001 Hi—Temp solder 2’ length

SPC0001 Saral Transfer Paper 12’ Roll

SPC0020 Sally’s Graphite Paper—12 sheets 18” x 24”

CCB25 Solid Point Woodburner

CCBTP Tip Package for CCB25—19 Tips

Books & Instructional Materials #ND1 The Art of Pyrography by Nedra Denison (Instruction; patterns, gourds) 66p b/w

#FC1 Great Book of Woodburning by Lora Irish (Instruction; beginner—advanced; projects & patterns) 191p color

#SP1 Learning the Art of Pyrography by Al Chapman (Instruction; basic techniques; project ideas; finishing) 63p b/w

#OD1 How to Woodburn Wildlife by Orchid Davis (Instruction; how to burn feathers, fur , eyes; finishing) 46p b/w

#OD2 Woodburning Western Wildlife by Orchid Davis (Instruction; western theme patterns) 55p b/w; some color

#SW3 Pyrography Workbook by Sue Walters (Instruction; A-Z woodburning; 3 projects: duck, eagle,wolf) 137p color

#SW4 Wildlife Designs by Sue Walters (All about patterns; 30 Lg designs w/line & tonal patterns; 10 borders) 103p

#FR1 Carving Patterns by Frank Russell (General carving instruction; 80 carving patterns) 127p b/w

#GP1 Gourd Pyrography by Jim Widess (Guide to woodburning on gourds) 144p color

#SW5 Pyrography Workshop—2 DVD Set by Sue Walters; 85 min. 1 on 1 training; how-to; patterns included

Sue Walters Kits

#SWK1 Peregrine Falcon Kit

#SWK1B Peregrine Falcon Kit w/burner

#SWK2 Chickadee & Pine Kit

#SWK2B Chickadee & Pine Kit w/burner

#SWK3 Chipmunk on Rock Kit

#SWK3B Chipmunk on rock Kit w/burner

#SWK4 Loon on Water Kit

#SWK4B Loon on Water Kit w/burner

#SWK5 Tiger Kit

#SWK5B Tiger Kit w/burner

Five woodburning kits available from world renown artist Sue Walters. Each kit contains: Full step by step instruc-tion manual (18 pgs); one piece of select basswood; one additional loose leaf pattern; one piece of graphite transfer paper; one piece of 400 grit sandpaper. Each kit is also available with Colwood Craft Burner (#CCB25– pictured below) as an option.

CCB25

Wood Carrying Case Foam Grips

EZ Tip Puller

“A(1/4)” “B (1/4)” RT-C “D (3/16)”“E (1/4)”

“F (3/16)” “G (3/16)”“GR”

Rounded Heel

“H”Heavy Wire

“BR”Rounded Heel

“HR”Rounded Heel

Heavy Wire

“J(1/8)”

“K (5/32)”“KR”

Rounded Heel

“LE”(1 3/8 x 3/32)

“LM”(1 3/8 x 3/32)

“M (3/32)”

“MC (.030)”

“PS”(1 3/8 x 1/8) “S (3/16)”

“SQ”1 3/8 x 3/32

“FSS (1/8)” “FSM (3/16)” “FSL(1/4)”

“C2”(.25)

“C1”(.125)

“31SP”(5/32)

“45Q”(5/32)

“R (.240)” “R(.189)”

“R(.100)” “R(.071)” “DA”Double Line

Round

“DG”Double Line

Point

“Needle Point”

Colwood Tip Styles

The tip styles shown above are the most popular styles used by pyrographers. Virtually all of the styles above can be bent to 45 or 90degrees. By using a tipposition. Custom tips available upon request. Please call or send a drawing to:

Colwood Electronics44 Main St.Farmingdale, NJ 07727732-938-5556www.woodburning.com

bent in this fashion you may achieve different shading effects without having to put your hand in an unusual

All Tip Styles Available in FT or RT System

“MR”Rounded Heel

B3 - 2.3mmB2 - 1.6mmB1 - 1mm

Rounded Tips A, D, J - Used anywhere on the carving. These tips are for concaved areas, such as under

the neck and where the leg joins the body. They will follow concaved surfaces without digging into thewood. The "J" tip can be used to outline feathers. It allows the carver to turn on a tight radius.

Pointed Tips B, F, G, K - Used anywhere on the carving.

Style BR,GR, HR, KR, MR - Developed at the suggestion of world class carvers. The heel has been

rounded off to prevent digging into the wood.

Style C - A writing tip used to sign carvings, etc. Also used to burn nostrils and for burning plaques and

designs on wood.

Special Purpose Tips DA and DG - Double line burning tips allowing you to burn two lines

simultaneously.

Style E - A general purpose tip with a cutting edge on each side.

Style FSL, FSM, FSS - Designed to burn scales on fish. FSL- 1/4", FSM - 3/16", and FSS - 1/8".

Style H - The same size and shape as the G tip, but made with a heavier gauge material. This tip is

sharpened with a wider angle. It will burn a fine line, but does not burn as deeply into the wood as othertips.

Style LE - The flame tip. A smaller, longer (1 3/8") version of the E tip ideally suited for smaller carvings.

It has a cutting edge on both sides.

Style LM - Same shape as the M tip but a little longer (1 3/8").

Style M - A micro tip, especially useful on miniatures and wherever fine detail burning is desired.

Style MC - Similar to a fine ballpoint pen. Each tip is individually ground and polished. This microwriting tip is used for extremely fine writing, raising a duck bill's nostrils, indenting around a duck bill

nail, carving wrinkles on birds and fish, modeling around eyes, modeling bird feet finishing the center shaftof feathers, and signing.

Needle Point – This tip style is very similar to a sewing needle and is useful for extremely fine detail and

pointillism.

Style PS - Very useful for burning in tight and hard-to-reach areas like under wings. One of Colwood'slongest tips (1 3/8").

Style R - Used to burn circles. Four diameters: .071, .100, .189, .240 Burn complete circle with one

impression

Style S & SP - Designed for shading and raising feathers on carvings. SP is spoon shader for tighterareas.

Style QT (Quill Tip) - This tip is used for outlining feathers and shading.

Style SQ - Used in raising of shafts and outlining feathers. Also suited for flat burning and for raising

sharp lines, shading, and calligraphy.

Angled Tips - Used to outline and raise feathers and shading or detailing under wings. Available in 45 or90 degree angle. (Please specify tip style, angle, and whether for righthanded or lefthanded use when

ordering.)

Suggested Tip Uses

Instructions for Insertion and Removal ofFixed Tip Handpieces and Replaceable Tips

CORRECT

INCORRECT

A B

IMPORTANT - Make sure that the Male connector “A” is pushed all the way into, and completely covers

the Female Connector “B”. If not fully engaged intermittent operation could result.(see picture above)

PULL

HOW TO REMOVE TIP

1. Grasp tip firmly by collar andpull out.

OR2. Use our EZ Tip Puller as shownto the left.

EZ Tip Puller

HOW TO INSERT RT TIPS INTO HANDLE

1. Grasp tip assembly by the collar2. Align keyway in tip with key in handpiece3. Push tip in firmly

COLLAR KEYWAY

KEY

A

Cork Male Connector

Female Connector

B

Handpiece Cord

Fixed Tip Handpiece

The Fixed Tip handpiece and the RT handle connectto the Handpiece cord in exactly the same manner;Male Connector inserts into the Female connector.The burning tip cannot be removed from the Fixed TipHandpiece.

RT HandleA

Male Connector

The RT Handle does not come with any tips; theymust be purchased separately. See below for instructionson how to insert or remove the RT tip assembly intoRT Handle.

Handpiece Cord

Insertion of Fixed Tip Handpiece and RT Handle into Handpiece Cord

COLLAR

KEYWAY

RT Tip Assembly

The whole RT Tip Assembly isthe . The tip wirecannot be removed from the assembly.When you want to change tip stylesjust change the RT Tip Assembly.

replaceable tip

RT Tip Insertion and Removal Instructions

Handpiece Systems

RT System The RT system has three components: the Tip Wire, the RT Bushing and the RT Handle / Handpiece. The RT Tip Assembly comprises the Tip Wire and the RT Bushing. The Tip Wire cannot be removed from the RT Bushing, it is permanently crimped and soldered into the RT bushing which provides a more reliable and consistent burn. The RT Tip Assembly plugs into the RT Handle / Handpiece that has special gold plated connectors that ensure consistent operation. To change tip styles, just change RT Tip Assembly.

RT Handle / Handpiece

RT Tip Assembly

Tip Wire RT Bushing

FT System The FT system also has the three components, but they are hard wired and cannot be separated. Like the RT System, the Tip Wire cannot be removed from the FT Bushing. However, the FT System differs from the RT in that the FT Bushing cannot be removed from the Handle / Handpiece. To change tip styles the entire FT Handpiece is unplugged from the handpiece cord and replaced with a handpiece that has a different tip style.

Colwood offers two kinds of handpiece systems: the Replaceable / Removable Tip and the Fixed Tip. All tip styles are available in either system. In both systems all important connections are gold plated to reduce corrosion and en-hance reliability.

FT Handpiece

Tip Wire

FT Bushing

Advantages and Disadvantages Although both Systems provide consistent and reliable operation, there are some advantages and disadvantages to both. The biggest advantage of the RT System is price. You only have to purchase one Handle / Handpiece and each tip style is less expensive than its counterpart in the FT System. The advantage of the FT System is ease of use. Even though an EZ Tip Puller is available for the RT System, the FT Handpieces are easier to change. The RT System has one more electrical connection (RT Bushing into Handle) than the FT System. Over time this connection may become worn as a result of constant changing of tip styles, and inconsistent operation may result. Having said this, however, the RT System is far more popular; a resounding testament to its superior design over the competitor’s replaceable tip system. Note: It is recommended to have a second RT Handle as a back-up.

Colwood Price List

SKU Description Price SKU Description Price2015 Renaissance Workstation 450.00 GDP Galaxy Deluxe Package 313.00

Deluxe KitsControl Units

2015 Renaissance Workstation 450.00 GDP Galaxy Deluxe Package 313.002014 Renaissance controller only 200.00 SPDP Super Pro Deluxe Package 246.002016 Tech 2000 Handpiece for Renaissance only 250.00 DDP Detailer Deluxe Package 206.002013 Galaxy 190.00 CDP Cub Deluxe Package 195.002009 Olympiad w/Hot Knife & Uf Cord 183.00 GDPF Galaxy Deluxe Package w/FT 342.002003 Olympiad w/UF Cord 127.50 SPDPF Super Pro Deluxe Package w/FT 261.002004 Super Pro II(UF&HD Cord) 101.95 DDPF Detailer Deluxe Package w/FT 235.002004V Super Pro II - 220V 115.25 CDPF Cub Deluxe Package w/FT 223.00

d d i2006 Super Pro II w/2 UF Cords 101.95

2002 Detailer-Canada 87.25 GSP Galaxy Standard Package 280.002001 Detailer 73.50 SPSP Super Pro Standard Package 192.002001H Detailer w/HD Cord 75.50 DSP Detailer Standard Package 164.002001V Detailer - 220V 87.25 CSP Cub Standard Package 151.002000 Cub 60.95 GSPF Galaxy Standard Pkg w/FT 294.002000H Cub w/HD Cord 62.95 SPSPF Super Pro Standard Pkg w/FT 206.00

C l d C f il S d d k /

Standard Kits

CCB25 Colwood Craft Burner 13.00 DSPF Detailer Standard Package w/FT 178.00CCBTP Tip Package for CCB25 ONLY - 19 Tips 15.95 CSPF Cub Standard Package w/FT 165.00

0000C Fixed Handpiece Container 0.75 0300 Guide to Wood Burning Techniques 11.950020C Replaceable Tip Container 0.50 FC1 Great Book of Woodburning 22.950100 Extra Handpiece Clips 1.00 SP1 Learning the Art of Pyrography 12.950150 Extra Custom Cork Grip 1.25 OD1 How to Woodburn Wildlife 14.000151 C t C k H t Shi ld 1 75 OD2 W db i W t Wildlif 14 00

Books & Instructional MaterialsAccessories & Additional Products

0151 Custom Cork Heat Shield 1.75 OD2 Woodburning Western Wildlife 14.000150F Foam Grip 1.00 SW3 Pyrography Workbook 19.950155 EZ Tip Puller 5.25 SW4 Wildlife Designs - Patterns 14.950200 Honing Paper 0.75 GP1 Gourd Pyrography 14.950201 Colwood Cleaning Cloth (for tips) 1.50 FR1 Carving Patterns by Frank Russell 14.950750 Ultra Flex Cord 12.50 ND1 Taking Woodburning to New Limits 19.950801 Heavy Duty Cord (16awg) 14.75 SWK1 Peregrine Falcon Kit 17.500802 High Power Cord (14awg) 16.75 SWK1B Peregrine Falcon Kit w/ Burner 29.95g ( g) g0850 Detail Master Adapter Cord 16.25 SWK2 Chickadee & Pine Kit 17.500851 Adapter Cord (male x female) 16.25 SWK2B Chickadee & Pine Kit w/ Burner 29.950852 Razortip Adaptor (Razertip tips w/Colwood unit) 7.00 SWK3 Chipmunk on Rock Kit 17.500860 Plastic Carrying Case w/ storage box 28.50 SWK3B Chipmunk on Rock Kit w/ Burner 29.950860S Storage Box 7.75 SWK4 Loon on Water Kit 17.500866 Wood Carrying Case 44.95 SWK4B Loon on Water Kit w/ Burner 29.952010 Hot Knife (use with Olympiad) 55.95 SWK5 Tiger Kit 17.502011 Heavy Duty Olympiad Cord 18.95 SWK5B Tiger Kit w/Burner 29.952012 Ultra Flex Olympiad Cord (18awg) 16.95 SW5 Pyrography Workshop DVD (2 DVD Set) 19.953100 Graphite Paper 18" x 24" 2.95SPC0001 Saral Transfer Paper 12' Roll 11.75SPC0020 Sally's Graphite Paper -12 sheets 18" x 24" 14.75BM3 Binocular Magnifier 1-3/4x 14.75BM5 Binocular Magnifier 2-1/4x 14.75BM7 Binocular Magnifier 2-3/4x 14 75BM7 Binocular Magnifier 2 3/4x 14.75CCV Cherry Veneer 12"x11" w/ paper backing 3.75CBV Birch Veneer 12"x11" w/ paper backing 3.75CMV Maple Veneer 12"x11" w/ paper backing 3.75FSCB Floyd Scholz Comfort Band 10.95

Prices Subject to Change Without Notice

Colwood Price List

SKU Description Price SKU Description Price0001 FT-A (1/4") Large Round 13.95 0021 RT-A (1/4") Large Round 7.950001D FT-DA (3/16") 2 Line Round 19.95 0041 RT-DA (3/16") 2 Line Round 14.950002 FT-B (1/4") Large Point 13.95 0022 RT-B (1/4") Large Point 7.950002R FT-BR (1/4") Rounded Heel 14.95 0022R RT-BR (1/4") Rounded Heel 8.950002U FT-B Unsharpened (1/4") Unsharpened 13.95 0022U RT-B Unsharpened (1/4") Unsharpened 7.950002G FT - Bob Guge Unsharpened 17.95 0022G RT- Bob Guge Unsharpened 11.950003 FT-C (.076") Writing 13.95 0023 RT-C (.076") Writing 7.950003M* FT-MICRO C (.03) Micro Writing 17.95 0023M* RT-MICRO C (.03) Micro Writing 13.950003N* FT-Needle Point Needle Point 18.95 0023N* RT-Needle Point Needle Point 14.950004 FT-D (3/16") Small Round 13.95 0024 RT-D (3/16") Small Round 7.950005 FT-E (1/4") Spade 13.95 0025 RT-E (1/4") Spade 7.950006 FT-F (3/16") Spear 13.95 0026 RT-F (3/16") Spear 7.950007 FT-G (3/16") Small Point 13.95 0027 RT-G (3/16") Small Point 7.950007R FT-GR (3/16") Rounded Heel 14.95 0027R RT-GR (3/16") Rounded Heel 8.950007D FT-DG (3/16") 2 Line Point 20.95 0042 RT-DG (3/16") 2 Line Point 17.950008 FT-H (3/16") Heavy Point 13.95 0028 RT-H (3/16") Heavy Point 7.950008R FT-HR (3/16") Rounded Heel 14.95 0028R RT-HR (3/16") Rounded Heel 8.950008GO FT-Pat Godin Pat Godin 17.95 0028GO RT-Pat Godin Pat Godin 11.950009 FT-J (1/8") Tight Round 13.95 0029 RT-J (1/8") Tight Round 7.950010 FT-K (5/32") 1/2 Small Point 13.95 0030 RT-K (5/32") 1/2 Small Point 7.950010BA FT-Larry Barth Larry Barth 17.95 0030BA RT-Larry Barth Larry Barth 11.950010R FT-KR (5/32") Rounded Heel 14.95 0030R RT-KR (5/32") Rounded Heel 8.9511SP FT-Spoon Shader Spoon Shader 17.95 31SP RT-Spoon Shader Spoon Shader 13.95

FT S (3/16") RT S (3/16")

Fixed Tips (FT) Replaceable Tips (RT)

Prices Subject to Change Without Notice

0011 FT-S (3/16") Shading 13.95 0031 RT-S (3/16") Shading 7.958003S FT-Large Square Shader Shading 14.95 0038S RT-Large Square Shader Shader 8.950012 FT-PS (1/8" x 1 3/8") Primary Short 13.95 0033 RT-PS (1/8" x 1 3/8") Primary Short 7.950014 FT-M (3/32") Micro 13.95 0035 RT-M (3/32") Micro 7.950014R FT-MR (3/32") Rounded Heel 14.95 0035R RT-MR (3/32") Rounded Heel 8.950016 FT-SQ (3/32") Square 13.95 0043 RT-SQ (3/32") Square 7.950017 FT-LM (3/32" x 1 3/8") Long M 13.95 0044 RT-LM (3/32" x 1 3/8") Long M 7.950018 FT-LE (3/32" x 1 3/8") Small Long E 13.95 0045 RT-LE (3/32" x 1 3/8") Small Long E 7.5018Q FT-Quill Tip Quill Tip 17.95 45Q RT-Quill Tip Quill Tip 13.958001 FT-FSS (Small 1/8") Fish Scale 16.95 0036 RT-FSS (Small 1/8") Fish Scale 13.958002 FT-FSM (Medium 3/16") Fish Scale 16.95 0037 RT-FSM (Medium3/16") Fish Scale 13.958003 FT-FSL (Large 1/4") Fish Scale 16.95 0038 RT-FSL (large 1/4") Fish Scale 13.958003L FT-Xlg Fish Scale (3/8") Fish Scale 19.95 0038L RT-Xlg Fish Scale (3/8") Fish Scale 17.958001C FT-C1 Sm. Calligraphy 13.95 0036C RT-C1 Sm. Calligraphy 7.958003C FT-C2 Lg. Calligraphy 13.95 0038C RT-C2 Lg. Calligraphy 7.95FR071 FT-Circle .071" Dia. Circle 18.95 R071 RT-Circle .071" Dia. Circle Tip 14.95FR100 FT-Circle .100" Dia. Circle 18.95 R100 RT-Circle .100" Dia. Circle Tip 14.95FR189 FT-Circle .189" Dia. Circle 18.95 R189 RT-Circle .189" Dia. Circle Tip 14.95FR240 FT-Circle .240" Dia. Circle 18.95 R240 RT-Circle .240" Dia. Circle Tip 14.95FTB1 FT-Ball Tip #1 .0394" Ball Tip 19.95 RTB1 RT-Ball Tip #1 .0394" Ball Tip 15.95FTB2 FT-Ball Tip #2 .0625" Ball Tip 19.95 RTB2 RT-Ball Tip #2 .0625" Ball Tip 15.95FTB3 FT-Ball Tip #3 .09375" Ball Tip 19.95 RTB3 RT-Ball Tip #3 .09375" Ball Tip 15.950000 FT Handle w/ out tip 10.95 0020 RT Bushing w/ out tip 4.953000 6" Nichrome Wire 2.50 3000 6" Nichrome Wire 2.50

0500 15.95RT Handle (necessary for RT Tips)

Prices Subject to Change Without Notice

c o l w o o d e l e c t r o n i c s / 4 4 m a i n s t r e e t / f a r m i n g d a l e / n j / 0 7 7 2 7v o i c e : 7 3 2 . 9 3 8 . 5 5 5 6 f a x : 7 3 2 . 9 3 8 . 9 0 3 7

w w w . w o o d b u r n i n g . c o m

SUBTOTAL

All international shipments will be shipped via USPS, unless requested otherwise, and will be chargedthe actual shipping cost plus $3.00 handling. All prices subject to change without notice.

Domestic Shipping and Handling ChargesOrder Total Shipping$0.01 - $ 9.99 $5.75$10.00 - $49.99 $6.75$50.00 - $99.99 $7.75$100.00- $199.99 $8.75Over $200.00 $9.75

Shipping and handling charges apply to the 48 contigu-ous states. Call or Email for shipping charges to Alaskaand Hawaii. We now have e-commerce capabilities onour web site (www.woodburning.com) where you canplace your order and make payment through PayPal, thesecure payment system. It’s Safe, Simple, and Fast!

Order FormName

AddressCity State Postal Code

Phone

E-Mail

PART # QTY. DESCRIPTION PRICE TOTAL

7 % (NJ Residents Only) TAXSHIPPING & HANDLING

TOTAL

Form of Payment (circle one): Check Money Order Visa MastercardCredit Card # Exp.DateSec. Code__________

Return & Repair PolicyReturnsIf you wish to return your order for any reason you must notify Colwood within 10 days after receivingit. Refunds are only issued for items after they are returned in their original, undamaged condition.When returning an item you should use the original packing material and ship it via an insured carrier.Colwood is not responsible for any damage in return shipping. Actual shipping and handling chargesare not refundable.

If you wish to return items that were ordered in quantities of 10 or more, there will be 20% restockingfee. There is also a 20% restocking fee for any Reed & Barton item regardless of quantity.

If you receive an item that you believe was damaged in shipment, you must notify Colwood within 10days of receipt of your order. DO NOT throw away the original packing material. Damaged or defectiveitems will be replaced with an identical product and return shipping will be refunded.

If your equipment was purchased from one of our distributors you should consult them as totheir return policy.

RepairsIf your woodburner is in need of repair you should send the unit directly to us; DO NOT try to repair theunit yourself. Attempting to repair the unit yourself will void any existing warranty. If you send the unitin for repair you should include the following:

• A brief note explaining the problem

• The control unit (Detailer, Super Pro, Cub, etc.) with handpiece cords attached

• Any RT Handles or FT Handpieces used when experiencing the problem.

• Any RT Tip if applicable

• A daytime phone number where you can be reached

Handpieces and tips cannot be repaired but should be included when sending a unit in for repair as theyare sometimes the cause of the problem.

After our technical staff evaluates the woodburner you will be given a call with an estimate for repair.The vast majority of repairs cost less than $25.00.

Colwood44 Main Street

Farmingdale, NJ 07727T: 732.938.5556F: 732.938.9037