pyramex asia - i-force safety goggle flyer comparison
TRANSCRIPT
I -FORCE SIZES UPTO THE COMPETITION
ANSI/ISEA Z87.1-2010CAN/CSA Z94.3-07 Standards CE EN166 CertifiedAS/NZS 1377MCEPS Class 1 Ballistic Standards
Dual pane lens provides the ultimate anti-fog performance by isolating the temperature difference inside & outside of this eyewear.
The thermal system provides anti-fog protection in the worst weather conditions or extreme-temperature working environments.
Quick Release interchangeable temples and an elastic strap.
Lenses provide 99% protection against harmful UV rays.
(Part No. Pictured Above: SB7010SDT)
An outer polycarbonate lens protects against the environment, while an inner acetate lens is designed to prevent fogging.
The outside and inside of the lens is coated with H2X™ Anti-fog Technology for even more resistance to fogging, due to extreme temperatures.
Vented foam carriage provides maximum dust protection, as well as a sufficient airflow outlet for heat.
Sporty, lightweight design eliminates the bulkiness and weight of a goggle.
FEATURES Dual lens with ant i - fogcoat ing, performs bet ter every t ime.
ANTI-FOG COATING PERFORMANCE TEST RESULTS: I -FORCE VS. COMPETITOR
www.pyramexsafety.comPhone 800.736.8673 Fax 901.861.4967
Test Competitor I-FORCE Winner
Anti-Scratch Test with Steel Wool Visible scratches under 100g weight pressure
NO SCRATCHES under 120g weight pressure
Cleaning Towelette Test• No. of times lenses are wiped before fogging 6 Times 10 Times
85°C steam test for 30 minutes Fogging NO FOGGING
Weathering Test• Eyewear placed outdoors in sunny and rainy conditions for 7 days; then placed in -5°C freezer for 15 minutes
Extreme Fogging Slight Fogging
Temperature Isolation Test• 50°C steam test to the surface of the outer lens for 3 minutes; then test the temperature of surface of the inner lens under indoor 25°C ambient temperature
Outer side of Lens: 50°CInner side of Lens: 40°C
10°C Temperature difference between inner side &outer side of eyewear
Outer Lens: 50°CInner Lens: 30°C
20°C Temperature difference between inner side &outer side of eyewear; Keeps temperature more constant, for less fogging.