pumps - moody · pdf file0800 801404freefax: freephone lines are open between 8.00am and...

Moody Direct has been appointed as an authorised spare partsstockist for APV, supplying spare parts for equipment in the dairy,soft drinks and liquid food industry.

Pumps Data Sheets

Puma Pump Series III Page 2 - 6

Puma Pump Series IV 7 - 11

Puma Pump Series V & VI 12 - 20

W+ & WA+ Pumps 20 - 26

ZMS Pumps 27 - 30

TPM Pumps 31 - 35

0800 801404FREEFAX:

Freephone lines are open between8.00am and 5.30pmMonday to Friday APV – PUMPS

1

The Moody Panther is a new,

general purpose hygienic pump for the

Dairy, Beverage and Liquid Food

industries.

Based on the design of the “industry

standard” Puma pump, the Panther is a

stainless steel, centrifugal pump, for use on

all hygienic food and liquid applications

including:

■ MILK

■ CIP FLUIDS

■ JUICE

■ BEER

■ SOFT DRINKS

■ WHEY

The Panther pump offers the following

features:

■ Flexible pump duty – The broad pump

curve means that each model of

Panther can be used for several

different applications within the same

production area.

■ All parts interchangeable with Puma

pumps – All components within the

Panther pump can be exchanged for

Puma parts (and vice versa)

■ Panther and Puma pump dimensions

identical – The Panther can be installed

in place of a Puma without the need to

alter pipework.

■ Durability – Replacement of seals is the

only routine maintenance required.

THE MOODY PANTHER PUMPAlthough based on the design of the Puma Pump, the Panther Pump is not associated with APV

Alternative Parts

Giving Choice & Value

6663970800 FREEPHONE:

For calls outside the UKTelephone +44 1777 701141or Fax +44 1777 869983APV – PUMPS

2

Puma Pump Series III

Unshrouded Type

Shrouded Type

Pump assembly (Series III)

0800 801404FREEFAX:


3

Puma Pump Series III (contd)PUMA PUMP SERIES III (PAGE 2)

ITEM DESCRIPTION No. 2/2/9 2/21/2/9 2/3/9 2/3/11 3/4/11Page 2 off Shr’d Unshr’d Shr’d Unshr’d Shr’d Unshr’d Shr’d Unshr’d Shr’d Unshr’d

PUMP COMPLETE1 Frame Ass’y, supporting 1 - - - - - - - - - -- 3h.p. motor - 206552 - 206552 - 206552 - - - - -- 5.5h.p. motor - 206554 - 206554 - 206554 - 206558 - - -- 7.5 & 10h.p. motor - - - 206556 - 206556 - 206550 - - -- Frame sub-ass’y, welded, comprising:-

base (C/N 226241), frame (C/N 321985)and cover plate (C/N 339177) for 3h.p.motor with 9 in. body - - - - - - - - - - -

- base (C/N 226241), frame (C/N 321986)and cover plate (C/N 339178) for 5-5h.p.motor with 9 in. body - - - - - - - - - - -

- base (C/N 226241), frame (C/N 321988)and cover plate (C/N 339178) for 5-5h.p.motor with 11 in. body - - - - - - - - - - -

- base (C/N 226241), frame (C/N 321987)and cover plate (C/N 339179) for 7-5 and10h.p. motors with 9 in body - - - - - - - - - - -

- base (C/N 226241), frame (C/N 321989)and cover plate (C/N 339179) for 7-5 and10h.p. motors with 11 in body - - - - - - - - - - -

2 Foot, adjustable 3 337600 - 337600 - 337600 - 337600 - - -3 Grub-screw, 2 BA x 1/2 in. l’g. slot h’d. 3 434110 - 434110 - 434110 - 434110 - - -4 Grommet, 11/4 in. o.d. x 3/4 in. i.d. 1 410500 - 410500 - 410500 - 410500 - - -5 Frame , extension 1 - - - - - - - - - -

3 h.p. motor - - 321990 - 321990 - 321990 - - - -5.5 h.p. motor - - 321991 - 321991 - 321991 - 321993 - -

7-5, 10,15, 20 & 25 h.p. motors - - - - 321992 - 321992 - 321994 - 3219946 Plate, adaptor. 15, 20 & 25 h.p.motors only 1 - - - - - 338811 - 338811 - 3388117 Set-screw, 1/2 in. BSW x 11/4 in. l’g. hex. h’d. 4 - - - - - 431663 - 431663 - 4316638 Set-screw, 5/8 in. BSW x 11/2 in. l’g. hex. h’d. 4 - - - - - 453378 - 453378 - 4533789 Washer, plain, 1/2 in. i.d. 4 - - - - - 443820 - 443820 - 443820

10 Washer, plain, 5/8 in. i.d. 4 - - - - - 443521 - 443521 - 44352111 Motor, electric, Brook, 3-ph 50 or 60 c/s, a.c. 1 - - - - - - - - - -- 3 h.p., (2.2kw), 220/380-420 V - 457132 - 457132 - 457132 - - - - -- “(terminal box with continental conduit

thread) - - 457108 - 457108 - 457108 - - - -- “(terminal box with Brit. Std.

conduit thread) - - 457109 - 457109 - 457109 - - - -- 5.5 h.p., (4.0 kw), 220/380 V - 457102 457110 457102 457110 457102 457110 457102 457110 - -- 5.5 h.p., (4.0 kw), 380/420 V - 457103 457111 457103 457111 457103 457111 457103 457111 - -- 7.5 h.p., (5.5 kw), 220/380 V - - - 457104 457112 457104 457112 457104 457112 - -- 7.5 h.p., (5.5 kw), 380/420 V - - - 457105 457113 457105 457113 457105 457113 - -- 10 h.p., (7.5 kw), 220/380 V - - - 457106 457114 457106 457114 457106 457114 - -- 10 h.p., (7.5 kw), 380/420 V - - - 457107 457115 457107 457115 457107 457115 - -- 15 h.p., (11.0 kw), 220/380 V - - - - - - 457116 - 457116 - -- 15 h.p., (11.0 kw), 380/420 V - - - - - - 457117 - 457117 - -- 20 h.p., (14.9 kw), 220/380 V - - - - - - 457118 - 457118 - 457118- 20 h.p., (14.9 kw), 380/420 V - - - - - - 457119 - 457119 - 457119- 25 h.p., (18.6 kw), 220/380 V - - - - - - - - - - 457133- 25 h.p., (18.6 kw), 380/420 V - - - - - - - - - - 457134

†† not illustrated W.O works order • recommended spare * with pressure balance holes † without pressure balance holes



4

PUMA PUMP SERIES III (PAGE2)ITEM DESCRIPTION No. 2/2/9 2/21/2/9 2/3/9 2/3/11 3/4/11

Page 2 off Shr’d Unshr’d Shr’d Unshr’d Shr’d Unshr’d Shr’d Unshr’d Shr’d Unshr’d12 Set-screw 4 - - - - - - - - - -

3/8 in. BSW x 13/4 in. l’g. hex. h’d. - 431645 431645 431645 431645 431645 431645 - - - -1/2 in. BSW x 2 in. l’g. hex. h’d. - 431666 431666 431666 431666 431666 431666 431666 431666 - -

13 Nut, hex. 4 - - - - - - - - - -3/8 in. BSW - 417865 417865 417865 417865 417865 417865 - - - -1/2 in. BSW - 417867 417867 417867 417867 417867 417867 417867 417867 - -

14 Washer, motor/extension frame attachment 4 - - - - - - - - - -3/8 in. i.d. - - 443518 - 443518 - 443518 - - - -1/2 in. i.d. - - 443520 - 443520 - 443520 - 443520 - -

15 Plate ass’y, baffle and terminal box 1 228543 - 228543 - 228543 - 228543 - - -16 Plate sub-ass’y, baffle 1 339274 - 339274 - 339274 - 339274 - - -17 Clip 2 314253 - 314253 - 314253 - 314253 - - -18 Terminal Box 1 462036 - 462036 - 462036 - 462036 - - -19 Cover 1 462035 - 462035 - 462035 - 462035 - - -20 Gasket 1 322555 - 322555 - 322555 - 322555 - - -21 Earth Terminal Tag 1 457831 - 457831 - 457831 - 457831 - - -22 Warning Label 1 414211 - 414211 - 414211 - 414211 - - -23 Screw, Ch. Hd., OBA x 1/2 in. long 2 452601 - 452601 - 452601 - 452601 - - -24 Screw, Ch. Hd., M4 x 25mm long † 1 461101 - 461101 - 461101 - 461101 - - -46 Studding - M4 x 65mm long 1 437686 - 437686 - 437686 - 437686 - - -47 Nut, hex., Standard M4 25 460215 - 460215 - 460215 - 460215 - - -48 Washer, plain, standard M4 † 4 460315 - 460315 - 460315 - 460315 - - -49 Clamping washer, copper 28 444152 - 444152 - 444152 - 444152 - - -50 Set Screw, hex. h’d., M4 x 25mm long † 6 460070 - 460070 - 460070 - 460070 - - -52 Earth Cable Ass’y, Type ‘B’ 1 442011 - 442011 - 442011 - 442011 - - -25 Shaft, stub 1 - - - - - - - - - -- 3 h.p. motor - 354300 354300 354300 354300 354300 354300 - - - -

5.5 h.p. motor - 354301 354301 354301 354301 354301 354301 354301 354301 - -7.5 & 10 h.p. motor - - - 354302 354302 354302 354302 354302 354302 - -15 & 20 h.p. motor - - - - - - 354303 - 354303 - -20 & 25 h.p. motor - - - - - - - - - - 354321

26 Screw, Cap 2 - - - - - - - - - -- 1/4 in. BSF x 3/4 in. l’g. skt. h’d. - 445244 445244 445244 445244 445244 445244 445244 445244 - -

5/16 in. BSF x 1 in. l’g. skt. h’d. - - - 445245 445245 445245 445245 445245 445245 - -3/8 in. BSF x 1 in. l’g. skt. h’d. - - - - - - - - - - 445247

27 Backplate 1 338815 338815 338815 338815 338815 338815 338816 338816 - 33881628 Sealing ring for body joint • 1 413800 413800 413800 413800 413800 413800 413858 413858 - 41385829 Seal arrangements (See Fig. 8) Ref30 Impeller 1 - - - - - - - - - -- with 3/4 in. (19mm) dia. discharge holes - - - - - - - - - - -- 5 in. (127mm) size - 325840 325840 325840 325840 - - - - - -- 51/2 in. (140mm) size - 325839 325839 325839 325839 - - - - - -- 6 in. (152mm) size - 325838 325838 325838 325838 - - - - - -- 61/2 in. (165mm) size - 325837 325837 325837 325837 - - - - - -- 7 in. (178mm) size - 325836 325836 325836 325836 - - - - - -- 71/2 in. (191mm) size - 325835 325835 325835 325835 - - - - - -

- with 7/8 in. (22mm) dia. discharge holes - - - - - - - - - - -- 5 in. (127mm) size - - - - - 325864* 325864* - - - -

- - - - - 325852† 325852† - - - -- 51/2 in. (140mm) size - - - - - 325863* 325863* - - - -

- - - - - 325851† 325851† - - - -- 6 in. (152mm) size - - - - - 325862* 325862* - - - -

- - - - - 325850† 325850† - - - -- 61/2 in. (165mm) size - - - - - 325861* 325861* - - - -

- - - - - 325849† 325849† - - - -

†† not illustrated • recommended spare * with pressure balance holes † without pressure balance holes

Puma Pump Series III (contd)

0800 801404FREEFAX:


5

Puma Pump Series III (contd)PUMA PUMP SERIES III (PAGE 2)

ITEM DESCRIPTION No. 2/2/9 2/21/2/9 2/3/9 2/3/11 3/4/11Page 2 off Shr’d Unshr’d Shr’d Unshr’d Shr’d Unshr’d Shr’d Unshr’d Shr’d Unshr’d30(cont) 7 in. (178mm) size - - - - - 325860* 325860* - - - -

- - - - - 325848† 325848† - - - -- 71/2 in. (191mm) size - - - - - 325859* 325859* 325859* 325859* - -

- - - - - 325847† 325847† 325847† 325847† - -- 8 in. (203mm) size - - - - - - - 325858* 325858* - -

- - - - - - - 325845† 325845† - -- 81/2 in. (216mm) size - - - - - - - 325857* 325857* - -

- - - - - - - 325844† 325844† - -- 9 in. (229mm) size - - - - - - - 325856* 325856* - -

- - - - - - - 325843† 325843† - -- 91/2 in. (241mm) size - - - - - - - 325855* 325855* - -- with 11/4 in. (32mm) dia. discharge holes - - - - - - - - - - -- 7 in. (178mm) size - - - - - - - - - - 325865

- - - - - - - 325842† 325842† - -31 Nut, impeller • 1 213526 213526 213526 213526 213526 213526 213526 213526 - 21352632 Body ass’y 1 - - - - - - - - - -

with ISS fittings - 200764 200764 200770 200770 200799 200799 207101 207101 - -with RJT fittings - 200763 200763 200769 200769 200798 200798 207100 207100 - 207673with CLAMP fittings - 207667 207667 207668 207668 207669 207669 207670 207670 - 207674without fittings - 308439 308439 308442 308442 308454 308454 308464 308464 - 308465

33 Collar ass’y Clamping 1 228717 228717 228717 228717 228717 228717 228718 228718 - 22871834 Collar 1 228713 228713 228713 228713 228713 228713 314638 314638 - 31463835 Fork 1 321814 321814 321814 321814 321814 321814 321814 321814 - 32181436 Pin 1 338611 338611 338611 338611 338611 338611 338611 338611 - 33861137 T-bolt 1 310177 310177 310177 310177 310177 310177 310177 310177 - 31017738 Pin, cross 1 338350 338350 338350 338350 338350 338350 338350 338350 - 33835039 Shroud ass’y 1 227417 - 227417 - 227417 - 227417 - - -40 Set-screw, 2-BA x 3/8 in. l’g. r’d. h’d. 2 432410 - 432410 - 432410 - 432410 - - -41 Bolt, 1/4 in. BSW x 1/2 in. l’g. hex. h’d. 1 431625 - 431625 - 431625 - 431625 - - -42 Washer, plain, 1/4 in. i.d. 1 443816 - 443816 - 443816 - 443816 - - -43 Nameplate 1 - - - - - - - - - -

(in English) - 423483 423483 423483 423483 423483 423483 423483 423483 - 423483(in German) - 457811 457811 457811 457811 457811 457811 457811 457811 - 457811

44 Screw, hammer drive, No. 4 x 5/16 in. r’d. h’d. 4 434261 434261 434261 434261 434261 434261 434261 434261 - 43426145 Ring, joint • - - - - - - - - - - -

2 in. size 2 413510 413510 - - - - - - - -1 - - 413510 413510 413510 413510 413510 413510 - -

21/2 in. size (RJT body only) 1 - - 413512 413512 - - - - - -3 in. size 1 - - - - 413514 413514 413514 413514 - 4135144 in. size 1 - - - - - - - - - 413517

Special Tools ††Spanner for impeller nut 1 438928 438928 438928 438928 438928 438928 438928 438928 - 438928Key, hex, wrench, 3/16 in. A/F, for stub shaft securing

screws on 3 and 5-5 h.p. motors 1 414105 414105 414105 414105 414105 414105 414105 414105 - 414105Key, hex, wrench, 7/32 in. A/F, for stub shaft securing

screws on 7.5, 10, 15, 20 and 25 h.p. motors 1 - - 414106 414106 414106 414106 414106 414106 - 414106Spacer, stub shaft, No.22088 1 347651 347651 347651 347651 347651 347651 347651 347651 - 347651

51 Safety Guard for Stub Shaft W.O 1 - - - - - - - - - -Shrouded Pumps - - - - - - - - - - -

pumps with 3 h.p. motor only - 231126 - 231126 - 231126 - - - - -pumps with 51/2 h.p. motor only - 231127 - 231127 - 231127 - 231127 - - -

pumps with 71/2 & 10 h.p. motor only - - - 231128 - 231128 - 231128 - - -Unshrouded Pumps - - - - - - - - - - -

pumps with 15 or 20 h.p. motor only - - - - - - 231129 - 231129 - 231129pumps with 25 h.p. motor only - - - - - - - - - - 231120

†† not illustrated W.O works order • recommended spare * with pressure balance holes † without pressure balance holes

Puma Pump Series III Illustrated Parts List

APV – PUMPS

PUMA PUMP SERIES IIIITEM DESCRIPTION No. Code

off No.SEAL ARRANGEMENTS - -

NON-WATER COOLED FLEXIBOX SEAL - -1 Ring, sealing, seal face plate • 1 4138122 Plate, seal face • 1 3203033 Ring, sealing, housing 1 4440004 Seal ass’y, Flexibox type R 2540 - 57R • 1 4278405 O-ring • 1 4265736 Housing, plate 1 3443947 Set-screw, 5/16 in. BSF x 3/4in. lg. hex. hd. 3 431724

WATER COOLED FLEXIBOX SEAL - -8 Ring, sealing, seal face plate * • 1 4138129 Plate, seal face * 1 320303

10 Ring, sealing, housing * • 1 44400011 Seal ass’y, Flexibox type R 2540 - 57R * • 1 42784012 O-ring * • 1 42657313 Seal ass’y, water cooling 1 24402614 Housing ass’y 1 20883615 Housing 1 32509916 Tube, 1/4 in. o.d. x 20 swg x 1.0 in. lg. 2 35315817 Tube, 3/8 in. o.d. x 1/4 in. i.d. x 18 in. lg. 2 18261518 Seal, Cyclam type AD NIB 254713 PR • 1 42786619 Set-screw, 5/16 in. BSF x 3/4 in. lg. hex. hd. * 3 43172420 Adaptor, 3/8 in. o.d. tube x 1/8 in. BSP 2 406418

STUFFING BOX SEAL (Special order only) - -1 Ring, sealing, seal face plate * • 1 413812

21 Housing 1 34439422 Gland, split 1 32261223 Box ass’y, stuffing • 1 20123824 Washer, packing • 2 44402425 Ring, gland packing, Crane • 5 42663726 Set-screw, 5/16 in. BSF x 3/4 in. lg. hex. hd. 3 43172427 Screw, skt. hd. cap. 5/16 in. BSF x 3/4 in. lg. 3 44523628 Adaptor, 3/8 in. o.d. tube x 1/8 in. BSP 4 40641829 Tube, 3/8 in. o.d. x 1/4 in. i.d. x 18 in. lg. 2 18261530 Plug, blanking, 1/8 in. BSP 2 424343


For calls outside the UKTelephone +44 1777 701141or Fax +44 1777 869983

* Common to non-water cooled Flexibox seal arrangement

• recommended spare

6

Seal Arrangements (Series III)

0800 801404FREEFAX:


7

Puma Pump Series IV

Pump assembly (Series IV)



8

Puma Pump Series IV (contd)PUMA PUMP SERIES IV (PAGE 7)

ITEM DESCRIPTION No. 2/3/9 2/3/11Page 7 off SHR’D SHR’D

PUMP COMPLETE1 Frame ass’y, supporting 1 - -

3 h.p. motor - 206552 -5.5 h.p. motor - 206554 206558

7.5 & 10 h.p. motor - 206556 2065602 Frame sub-ass’y, welded, comprising:- 1 - -- base (C/N 226241), frame (C/N 321985) and cover plate (C/N 339177) for

3 h.p. motor with 9 in. body - - -- base (C/N 226241), frame (C/N 321986) and cover plate (C/N 339178) for

5.5 h.p. motor with 9 in. body - - -- base (C/N 226241), frame (C/N 321988) and cover plate (C/N 339178) for

5.5 h.p. motor with 11 in. body - - -- base (C/N 226241), frame (C/N 321987) and cover plate (C/N 339179) for

7.5 & 10 h.p motor with 9 in. body - - -- base (C/N 226241), frame (C/N 321989) and cover plate (C/N 339179) for

7.5 & 10 h.p motor with 11 in. body - - -3 Foot, adjustable 3 337600 3376004 Grub-screw, 2 BA x 1/2 in. l’g. slot h’d. 3 434110 4341105 Grommet, 11/4 in. o.d. x 3/4 in. i.d. 1 410500 4105006 Motor, electric, Brook, 3-ph, 50 or 60 c/s a.c. 1 - -

3 h.p. (2.2 kw) 220/380-420 V - 457100 -5.5 h.p. (4.0 kw) 220/380 V - 457102 4571025.5 h.p. (4.0 kw) 380/420 V - 457103 4571037.5 h.p. (5.5 kw) 220/380 V - 457104 4571047.5 h.p. (5.5 kw) 380/420 V - 457105 45710510h.p. (7.5 kw) 220/380 V - 457106 45710610h.p. (7.5 kw) 380/420 V - 457107 457107

7 Set-screw 4 - -3/8 in. BSW x 13/4 in. l’g. hex. h’d. - 431645 -1/2 in. BSW x 2 in. l’g. hex. h’d. - 431666 431666

8 Nut, hex. 4 - -3/8 in. BSW - 417865 -1/2 in. BSW - 417867 417867

9 Plate ass’y, baffle and terminal box 1 228543 22854310 Plate sub-ass’y, baffle 1 339274 33927411 Clip 2 314253 31425312 Terminal Box 1 462036 46203613 Cover 1 462035 46203514 Gasket 1 322555 32255515 Earth Terminal Tag 1 457831 45783116 Warning Label 1 414211 41421117 Screw, Ch. H’d., OBA x 1/2 in. long 2 452601 45260118 Screw, Ch. H’d., M4 x 25 mm long † 1 461101 46110153 Studding - M4 x 65 mm long 1 437686 43768654 Nut, hex., standard M4 25 460215 46021555 Washer, plain, standard M4 † 4 460315 46031556 Clamping washer, copper 28 444152 44415257 Set Screw, hex. h’d., M4 x 25 mm long † 6 460070 46007058 Earth Cable Ass’y, Type ‘B’ 1 442011 44201119 Seal ass’y, Cyclam Aseptic and Seal Fitting 1 - -

3 h.p. motor - 244049 -5.5 h.p. motor - 244050 244050

7.5 & 10 h.p. motor - 244051 244051

†† not illustrated •• contained in spares pack • recommended spare * with pressure balance holes † without pressure balance holes

0800 801404FREEFAX:


9



20 Shaft, stub 1 - -3 h.p. motor - 354309 -

5.5 h.p. motor - 354307 3543077.5 & 10 h.p. motor - 354308 354308

21 Screw, cap 2 - -1/4 in. BSF x 3/4 in. l’g. skt. h’d. (3 and 5.5 h.p. motor) - 445244 4452445/14 in. BSF x 1 in. l’g. skt. h’d. (7.5 and 10 h.p. motor) - 445245 445245

22 Seal, sub-ass’y 1 244048 -23 Backplate 1 338818 33881724 Housing, rear 1 324904 32490425 Plate ass’y, seal face, Cyclam type AD 2550 10 TANX 14 •• 1 356067 35606726 Seal, Cyclam Aseptic type AD 2547 13 PRN 14K • 2 459149 45914927 Collar 1 314682 31468228 Grub-screw, 2 BA x 1/4 in. l’g. slot h’d 2 434106 43410629 Plate ass’y, seal face, Cyclam type AD 2557 10 TBNX 14 •• 1 356068 35606830 Housing, front 1 324903 32490331 Ring, retaining 1 345088 34508832 Gasket •• 2 449115 44911533 Bolt, hex. h’d., 5/14 in. BSF x 21/4 in. l’g. 3 403219 40321934 Banjo and bolt ass’y, 1/4 in. BSP 2 400146 40014635 Hose, 1/4 in. i.d. x 18 in. l’g. c/w end fittings 2 410922 41092236 Impeller, with 7/8 in. (22 mm) dia. discharge holes 1 - -

5 in. (127 mm) size - 325864* -- 325852† -

51/2 in. (140 mm) size - 325863* -- 325851† -

6 in. (152 mm) size - 325862* -- 325850† -

61/2 in. (165 mm) size - 325861* -- 325849† -

7 in. (178 mm) size - 325860* -- 325848† -

71/2 in. (191mm) size - 325859* 325859*- 325847† 325847†

8 in. (203 mm) size - - 325858*- - 325845†

81/2 in. (216 mm) size - - 325857*- - 325844†

9 in. (229 mm) size - - 325856*- - 325843†

91/2 in. (241 mm) size - - 325855*- - 325842†

37 Nut, impeller •• 1 213526 21352638 Sealing ring for body joint •• 1 413800 41385839 Body ass’y 1 - -

with RJT fittings - 200798 207100with ISS fittings - 200799 207101with CLAMP fittings - 207669 207670without fittings - 308454 308464

40 Collar ass’y, clamping 1 228717 22871841 Collar 1 228713 22871342 Fork 1 321814 32181443 Pin 1 338611 338611




10



44 T-Bolt 1 310177 31017745 Pin, cross 1 338350 33835046 Shroud ass’y 1 227417 22741747 Set-screw, 2 BA x 3/8 in. l’g. r’d. h’d. 2 432410 43241048 Bolt, 1/4 in. BSW x 1/2 in. l’g. hex. h’d. 1 431625 43162549 Washer, plain, 1/4 in. i.d. 1 443816 44381650 Nameplate 1 - -

(in English) - 457808 457808(in German) - 457812 457812

51 Screw, hammer drive, No. 4 x 5/12 in. l’g. r’d. h’d. 4 434261 43426152 Ring, joint •• - - -

2 in. size 1 413510 4135103 in. size 1 413514 413514

Special Tools ††Spanner, for impeller nut 1 438928 438928Key, hex, wrench, 3/16 in. A/F, for stub shaft securing screws on 3 and 5.5 h.p. motors 1 414105 414105Key, hex, wrench, 7/32 in. A/F, for stub shaft securing screws on 7.5, 10, 15 and 20 h.p. motors 1 414106 414106

Fitting 1 353319 353319O-ring for installation of Cyclam seal face plate into housings 1 426515 424515O-ring 1 426509 426509Sleeve for ass’y of Cyclam seals onto stub shaft 1 353320 353320Ring, tapered 1 353321 353321


0800 801404FREEFAX:


11

Puma Pump Series IV Illustrated Parts List PUMA PUMP SERIES IV

ITEM DESCRIPTION No. Codeoff No.

SEAL ARRANGEMENTS - -NON-WATER COOLED FLEXIBOX SEAL - -

1 Ring, sealing, seal face plate • 1 4138122 Plate, seal face • 1 3203033 Ring, sealing, housing 1 4440004 Seal ass’y, Flexibox type R 2540 - 57R • 1 4278405 O-ring • 1 4265736 Housing, plate 1 3443947 Set-screw, 5/16 in. BSF x 3/4in. lg. hex. hd. 3 431724

WATER COOLED FLEXIBOX SEAL - -8 Ring, sealing, seal face plate * • 1 4138129 Plate, seal face * 1 320303

10 Ring, sealing, housing * • 1 44400011 Seal ass’y, Flexibox type R 2540 - 57R * • 1 42784012 O-ring * • 1 42657313 Seal ass’y, water cooling 1 24402614 Housing ass’y 1 20883615 Housing 1 32509916 Tube, 1/4 in. o.d. x 20 swg x 1.0 in. lg. 2 35315817 Tube, 3/8 in. o.d. x 1/4 in. i.d. x 18 in. lg. 2 18261518 Seal, Cyclam type AD NIB 254713 PR • 1 42786619 Set-screw, 5/16 in. BSF x 3/4 in. lg. hex. hd. * 3 43172420 Adaptor, 3/8 in. o.d. tube x 1/8 in. BSP 2 406418

STUFFING BOX SEAL (Special order only) - -1 Ring, sealing, seal face plate * • 1 413812

21 Housing 1 34439422 Gland, split 1 32261223 Box ass’y, stuffing • 1 20123824 Washer, packing • 2 44402425 Ring, gland packing, Crane • 5 42663726 Set-screw, 5/16 in. BSF x 3/4 in. lg. hex. hd. 3 43172427 Screw, skt. hd. cap. 5/16 in. BSF x 3/4 in. lg. 3 44523628 Adaptor, 3/8 in. o.d. tube x 1/8 in. BSP 4 40641829 Tube, 3/8 in. o.d. x 1/4 in. i.d. x 18 in. lg. 2 18261530 Plug, blanking, 1/8 in. BSP 2 424343

* Common to non-water cooled Flexibox seal arrangement

• recommended spare

Seal Arrangements (Series IV)



12

Puma Pump Series V & VIExploded View - Shrouded Pump (Series V & VI)

Puma Pump Series V & VI (contd)PUMA PUMP SERIES V & VI - INCLUDING 11/2/2/ 7 PUMP, SERIES 2

ITEM DESCRIPTION No. 11/2/2/7 2/2/9 2/21/2/9 2/3/9 2/3/11 3/4/11Page 12 off

1 Main supporting frame and cradle: 11.1 kW shrouded motor 206513 - - - - -2.2 kW shrouded motor - 206552 206552 206552 - -4.0 kW shrouded motor - 206554 206554 206554 206558 -5.5 kW shrouded motor - - - - 206560 -

2 Setscrews for above frame, Hex. hd. 41.1 kW motor size 5/16 in. B.S.W. 431635 - - - - -2.2 kW motor size 3/8 in. B.S.W. - 431645 431645 431645 - -Larger sizes 1/2 in. B.S.W. - 431666 431666 431666 431666 -

Nut, hexagon, for above †† 45/16 in. B.S.W. 417864 - - - - -3/8 in. B.S.W. - 417865 417865 417865 - -1/2 in. B.S.W. - 417867 417867 - - -

3 Nameplate 1in English 457841 457841 457841 457841 457841 457841in German 457843 457843 457843 457843 457843 457843

4 Pin, rd.hd. No.4, for above 4 434261 434261 434261 434261 434261 4342615 Extension frame for unshrouded motors 1 321976 - - 322001 322002 3220022 Setscrew for above frame, hex. hd. 4

5/16 in. B.S.W. 431635 - - - - -M16 - - - 460158 460158 460158

Nut, hexagon, for above †† 45/16 in. B.S.W. 417864 - - - - -M16 - - - 460212 460212 460212

Washer †† 43/8 in. - 443518 443518 443518 - -1/2 in. - 443520 443520 443520 443520 -M16 - - - 460317 460317 460317

6 Shaft, stub 11 in. dia. 1.1 kW motor 354347 - - - - -

2.2 kW motor - 354341 354341 354341 - -4.0 kW motor - 354342 354342 354342 354342 -5.5 & 7.5 kW motor - - 354343 354343 354343 -

11/2 in. dia. for larger motors - - - 354339 354339 3543397 Screw, cap, socket head 2

1/4 in. B.S.F. 445244 445244 445244 445244 445244 -5/16 in. B.S.F. - - 445245 445245 445245 -3/8 in. B.S.F. - - - 445247 445247 445247

8 Safety guard, stub shaft W.O1.1 kW unshrouded motor 231132 - - - - -1.1 kW shrouded motor 231125 - - - - -2.2 kW shrouded motor - 231126 231126 231126 - -4.0 kW shrouded motor - 231127 231127 231127 231127 -5.5 & 7.5 kW shrouded motors - - 231128 231128 231128 -11, 15 & 18.5 kW unshrouded motors - - - 231131 231131 231131

9 Backplate 11 in. dia. pump shaft 341365 338815 338815 338815 338816 -11/2 in. dia. pump shaft - - - 336469 336470 336470

10 Joint, body 1 413859 413800 413800 413800 413858 41385811 Impeller 1

for 1 in. dia. pump shaft without balancing holesSize 31/2 in. (89 mm) 325802 - - - - -Size 33/4 in. (95 mm) 325803 - - - - -Size 4 in. (102 mm) 325804 - - - - -Size 43/8 in. (111 mm) 325805 - - - - -

†† not illustrated

0800 801404FREEFAX:


13



14


ITEM DESCRIPTION No. 11/2/2/7 2/2/9 2/21/2/9 2/3/9 2/3/11 3/4/11Page 12 off11(cont) Size 47/8 in. (124 mm) 325806 - - - - -

Size 51/4 in. (133 mm) 325807 - - - - -Size 5 in. (127 mm) - - - 326088 - -Size 51/2 in. (140 mm) - - - 326087 - -Size 6 in. (152 mm) - - - 326086 - -Size 61/2 in. (165 mm) - - - 326085 - -Size 7 in. (178 mm) - - - 326084 - -Size 71/2 in. (191 mm) - - - 326083 326083 -Size 8 in. (203 mm) - - - - 325817 -Size 81/2 in. (216 mm) - - - - 325818 -Size 9 in. (229 mm) - - - - 325819 -Size 91/2 in. (241 mm) - - - - 325820 -

for 1 in. dia. pump shaft with balancing holesSize 5 in. - 326039 326039 326094 - -Size 51/2 in. - 326038 326038 326093 - -Size 6 in. - 326037 326037 326092 - -Size 61/2 in. - 326036 326036 326091 - -Size 7 in. - 326035 326035 326090 - -Size 71/2 in. - 326034 326034 326089 326089 -Size 8 in. - - - 325821 325821 -Size 81/2 in. - - - 325822 325822 -Size 9 in. - - - 325823 325823 -Size 91/2 in. - - - 325824 325824 -

for 11/2 in. dia. pump shaft without balancing holesSize 5 in. - - - 325891 - -Size 51/2 in. - - - 325892 - -Size 6 in. - - - 325893 - -Size 61/2 in. - - - 325894 - -Size 7 in. - - - 325895 - -Size 71/2 in. - - - 325896 325896 -Size 8 in. - - - - 325706 -Size 9 in. - - - - 325708 -Size 91/2 in. - - - - 325709 -

for 11/2 in. dia. pump shaft with balancing holesSize 5 in. - - - 325700 - -Size 51/2 in. - - - 325701 - -Size 6 in. - - - 325702 - -Size 61/2 in. - - - 325703 - -Size 7 in. - - - 325704 - 325898Size 71/2 in. - - - 325705 325705 -Size 8 in. - - - - 325711 -Size 81/2 in. - - - - 325712 -Size 9 in. - - - - 325713 -Size 91/2 in. - - - - 325714 -

12 Clamping collar assembly 1 228719 228717 228717 228717 228721 22872112A Tommy bar for clamping collar 1 - - - - 304079 30407913 Ring, joint, RJT As reqd

Size 11/2 in. 413509Size 2 in. 413510 413510 413510 413510 413510 -Size 21/2 in. - - 413512 - - -Size 3 in. - - - 413514 413514 -Size 4 in. - - - - - 413517

14 Nut, impeller 11 in. dia pump shaft 334736 335750 335750 335750 - -11/2 in. dia pump shaft - - - 335745 335745 335745


0800 801404FREEFAX:


15



15 Body, pump 1RJT connections 225568 200763 200769 200798 207100 207673ISS connections 225569 200764 200770 200799 207101 207674

FOR SHROUDED MOTORS ONLY:16 Grubscrew 2BA, slot head 3 434106 434110 434110 434110 434110 -17 Foot, ball 3 337659 337600 337600 337600 337600 -18 Setscrew, 2BA, round head 1 or 2 432410 432410 432410 432410 432410 -19 Washer, plain, 1/4 in. 1 443816 443816 443816 443816 443816 -20 Bolt, hex. head, 1/4 in. B.S.W. 1 431625 431625 431625 431625 431625 -21 Clip 2 314254 314253 314253 314253 314253 -22 Screw, OBA, cheese head 2 254111 - - - - -

2BA, cheese head 2 - 452601 452601 452601 452601 -23 Baffle plate and terminal box assembly 1 228537 228543 228543 228543 228543 -

Earth cable †† 1 442010 442011 442011 442011 442011 -Grommet †† 1 410500 410500 410500 410500 410500 -

24 Shroud, case assembly 1 227418 227417 227417 227417 227417 -Eyebolt, for unshrouded motors only †† 2 - - - 402358 402358 402358

25 Motor, electric, 3 ph. 50 Hz 1Shrouded pumps:

1.1 kW 220/380-420 V 415732 - - - - -2.2 kW 220/380-420 V - 457132 457132 457132 - -4.0 kW 380-420 V - 457103 457103 457103 457103 -5.5 kW 380-420 V - - 457105 457105 457105 -7.5 kW 380-420 V - - 457107 457107 457107 -

Unshrouded pumps:1.1 kW 220/380-420 V 415734 - - - - -11.0 kW 380-420 V - - - 416672 416672 -15.0 kW 380-420 V - - - 416673 416673 41667318.5 kW 380-420 V - - - - - 416674

Modified or additional components for unshrouded Series 6 pump for APV UPERISER units only26 Motor rails 2 - - - - 343937 -27 Foot, ball, adjustable 4 - - - - 337600 -28 Locknut, 5/8 in. BSF, hex. 4 - - - - 418660 -29 Setscrew, 1/2 in. BSW x 13/5 in. lg., hex. head 4 - - - - 453370 -30 Washer, plain, 1/2 in. 4 - - - - 443520 -31 Body, pump 1 - - - - 205975 -32 Nameplate 1 - - - - 457842 -

TOOLS ††Hex. Wrench (Allen key) for stub shaft screws:

3/16 in. A/F for 1 in. dia. shaft 414105 414105 414105 414105 414105 -7/32 in. A/F for 11/2 in. dia. shaft - - - 414106 414106 414106

Spanner for impeller nut: 11 in. dia shaft 438986 438928 438928 438928 438928 -11/2 in. dia shaft - - - 438919 438919 -

Spacer collar (See page 2) 11 in. dia shaft 347651 347651 347651 347651 347651 -11/2 in. dia shaft - - - 347672 347672 347672

Assembly tools for aseptic sealAssembly sleeve to fit seals 11 in. dia shaft - - - 353320 353320 -11/2 in. dia shaft - - - 353329 353329 -

Assembly tools for seal faces 11 in. dia shaft - - - 353319 353319 -11/2 in. dia shaft - - - 353328 353328 -

O-ring for use with above tool to protect lapped faces(See Page 11 for Code Numbers)




16

Puma Pump Series V & VI (contd)

Flexibox Seals

0800 801404FREEFAX:


17



NON-WATER COOLED FLEXIBOX SEAL1 Joint, seal face, gasket 1

1 in. dia shaft 413812 413812 413812 413812 413812 -11/2 in. dia shaft - - - 413997 413997 413997

2 Seal face 11 in. dia shaft 459646 459646 459646 459646 459646 -11/2 in. dia shaft - - - 459641 459641 459641

3 Joint, retaining ring, gasket 11 in. dia shaft 444000 444000 444000 444000 444000 -11/2 in. dia shaft - - - 413998 413998 413998

4 Seal assembly: 1Flexibox R2540-73R 1 in. dia shaft 427840 427840 427840 427840 427840 -Flexibox RG1500A-93R 11/2 in. dia shaft - - - 459642 459642 459642

5 ‘O’ ring (packing ring) 11 in. dia shaft 426753 426753 426753 426753 426753 -11/2 in. dia shaft - - - 426509 426509 426509

6 Retaining ring, 1 in. dia shaft 1 344394 344394 344394 344394 344394 -Retaining ring, 11/2 in. dia shaft or 1 - - - 343438 343438 343438

7 Setscrew, 5/16 in, B.S. hex. head 3 431724 431724 431724 431724 431724 431724EXTRA ITEMS REQUIRED FOR WATER-COOLED SEAL

8 In place of item 6:Housing, 1 in. dia shaft 1 208836 208836 208836 208836 208836 -Housing, 11/2 in. dia shaft or 1 - - - 208859 208859 208859

9 Tube, polythene, 3/8 in. o.d. x 18 in. long 2 182615 182615 182615 182615 182615 18261510 Hose clip 2 406208 406208 406208 406208 406208 40620811 Adaptor, 3/8 in. o.d. to 1/8 in. B.S.P. 2 353158 353158 353158 353158 353158 35315812 Seal assembly:

Cyclam ADN1B25.47.13PR, 1 in. dia shaft 427866 427866 427866 427866 427866 -Cyclam ADN1A38.65.18PR, 11/2 in. dia shaft - - - 459643 459643 459643



18

Puma Pump Series V & VI (contd)

Cyclam Aseptic Seal

0800 801404FREEFAX:


19


ITEM DESCRIPTION No. 11/2/2/7 2/2/9 2/21/2/9 2/3/9 2/3/11 3/4/11Page18 off

ASEPTIC SEAL1 Hose, steam, 1/4 in. i.d. x 18 in. long 2 - - - 410922 410922 -2 Banjo fitting, 1/4 in. B.S.P. 2 - - - 400146 400146 -3 Rear housing 1

1 in. dia shaft - - - 324904 324904 -11/2 in. dia shaft - - - 324936 324936 -

4 Seal face, steam 11 in. dia shaft - - - 356067 356067 -11/2 in. dia shaft - - - 356069 356069 -

5 Seal 2Cyclam ADN14K.25.47.13PR, 1 in. dia shaft - - - 459149 459149 -Cyclam ADN14K.38.65.18PR, 11/2 in. shaft - - - 459647 459647 -

6 Collar 11 in. dia shaft - - - 314682 314682 -11/2 in. dia shaft - - - 314695 314695 -

7 Grubscrew, 2BA x 1/4 in. long 2 - - - 434106 434106 -8 Retaining ring 1

1 in. dia shaft - - - 345088 345088 -11/2 in. dia shaft - - - 355629 355629 -

9 Seal face, product 11 in. dia shaft - - - 356068 356068 -11/2 in. dia shaft - - - 356070 356070 -

10 Centre housing 11 in. dia shaft - - - 324903 324903 -11/2 in. dia shaft - - - 324935 324935 -

11 Gasket 21 in. dia shaft - - - 449115 449115 -11/2 in. dia shaft - - - 449149 449149 -

12 Bolt, 5/14 in. BSF, hex. head 31 in. dia shaft - - - 403219 403219 -11/2 in. dia shaft - - - 403223 403223 -

Spares pack comprising items 4, 9 & 11 11 in. dia shaft - - - 245279 245279 -11/2 in. dia shaft - - - 223332 223332 -

Shaft, stub 11 in. dia 2.2 kW motor - - - 354344 - -

4.0 kW motor - - - 354345 354345 -5.5 & 7.5 kW motor - - - 354346 354346 -

11/2 in. dia. for 11 kW motor - - - - 354340 -

W+ Pump



20

W+ Pump Complete

0800 801404FREEFAX:


21

W+ Pump Complete (contd)

Pos Stk/Qty Description Part No.1a 1 Pumphousing 188710 168838 182702 253416 182645 182703 182704 1686441b 1 Inducer housing 183127 182709 188515 182710 1885182a 1 Cap nut 274351 260058 260058 260059 260058 260058 260059 2743512b 1 Inducer 261540 188142 261540 188142 1881443* 1 O-ring EPDM 773038 772489 772489 772491 772489 772489 772491 773038

Viton 773039 772490 772490 772492 772490 772490 772492 7730394 1 Impeller s/p22 s/p22 s/p22 s/p22 s/p22 s/p22 s/p22 s/p225* 1 Shaft Seal s/p23 s/p23 s/p23 s/p23 s/p23 s/p23 s/p23 s/p236* 1 O-ring EPDM 773078 770006 771627 770041 771627 771627 771630 771711

Viton 773079 770007 771628 770042 771628 771628 771631 7717127a 1 Back Plate 260934 260945 260935 260936 260937 2609207b 1 Back Plate 188735** 261566**8 1 Pin 772493 772493 772493 7724939a 1 Clamp Ring 169050 188430 188436 188436 188436 188432 1884319b 8 Screw M8/M10 75600110* 1 O-ring EPDM 773038 771621 771621 771624 771621 771621 771624 773038

Viton 773039 771622 771622 771625 771622 771622 771625 77303911 1 Shaft s/p24/25 s/p24/25 s/p24/25 s/p24/25 s/p24/25 s/p24/25 s/p24/25 s/p24/2512 2 Screw s/p24/25 s/p24/25 s/p24/25 s/p24/25 s/p24/25 s/p24/25 s/p24/25 s/p24/2513 2 Shaft Guard *** - - - - - - - -14 1 Extension Frame *** - - - - - - - -15 2 Bracket (Screw) 268499 701509 268499 268499 268499 26849916 2 Screw 701942 771199 701942 701942 701942 70194217 1 Washer *** - - - - - - - -18 1 Motor *** - - - - - - - -

W+55/35 W+55/60 W+60/110 W+65/350 W+70/40 W+80/80 W+110/1301a 1 Pumphousing 182646 182647 182705 253421 182706 168619 2534201b 1 Inducer housing 188516 182711 188519 188517 182712 1831382a 1 Cap nut 260058 260059 260059 260059 260059 260059 2600592b 1 Inducer 261540 188143 188144 261541 188143 1881443* 1 O-ring EPDM 772489 772491 772491 772491 772491 772491 772491

Viton 772490 772492 772492 772492 772492 772492 7724924 1 Impeller s/p22 s/p22 s/p22 s/p22 s/p22 s/p22 s/p225* 1 Shaft Seal s/p23 s/p23 s/p23 s/p23 s/p23 s/p23 s/p236* 1 O-ring EPDM 771630 771630 771705 770015 771708 771714 771717

Viton 771631 771631 771706 770016 771709 771715 7717187a 1 Back Plate 260939 260940 260941 260946 260942 260943 2609448 1 Pin 772493 772493 772493 772493 7724939a 1 Clamp Ring 188432 188432 188433 188434 1884359b 8 Screw M8/M10 700234 70166910* 1 O-ring EPDM 771621 771624 771624 771624 771624 771624 771624

Viton 771622 771625 771625 771625 771625 771625 77162511 1 Shaft s/p24/25 s/p24/25 s/p24/25 s/p24/25 s/p24/25 s/p24/25 s/p24/2512 2 Screw s/p24/25 s/p24/25 s/p24/25 s/p24/25 s/p24/25 s/p24/25 s/p24/2513 2 Shaft Guard *** - - - - - - -14 1 Extension Frame *** - - - - - - -15 2 Bracket (Screw) 268499 268499 268499 234177 268499 268499 70166916 2 Screw 701942 701942 701942 700241 701942 701942 70168617 1 Washer *** - - - - - - -18 1 Motor *** - - - - - - -

* Special seal see page 23** Integrated with extension frame Pos.14

s/p(xx)= See page (no.)*** Call in with pump serial number & dimensions to obtain correct part number.

PUMP TYPEW+10/8 W+22/20 W+30/80 W+25/210 W+35/35 W+35/55 W+30/120 W+50/8



22

PUMP TYPEW+22/20 W+30/80 W+35/35 W+35/55 W+50/8

PART NO.

IMPELLERDIAMETER

Ø200 267328Ø195 273889

Ø190 273890Ø185 273891

Ø180 253740 273892Ø175 253739 267492 273893

Ø170 253738 267481 267493 273894Ø165 267469 267482 267494 273895

Ø160 267470 267483 267495 273896Ø155 267471 267484 267496 273897

Ø150 267472 267485 267497 273898Ø145 267473 267486 267498 273899

Ø140 253737* 267474 267487 267499 273900Ø135 267460 267475 267488 267500

Ø130 267461 267476 267489 267501Ø125 267462 267477 267490 267502

Ø120 267463 267478 267491 267503Ø115 267464 267479

Ø110 267465 267480Ø105 267466

Ø100 267467Ø95 267468

IMPELLERPUMP TYPE

DIAMETERW+10/8 W+30/120 W+55/35 W+55/60 W+60/110 W+70/40 W+80/80 W+110/130 W+25/210 W+65/350

PART NO.Ø290 253748 253749

Ø285 267680 267700Ø280 267681 267701

Ø275 267682 267702Ø270 267683 267703

Ø265 267684 267704Ø260 267685 267705 253750

Ø255 253747 267686 267706 267716Ø250 267559 267687 267707 267717

Ø245 267560 267688 267708 267718Ø240 253746 267561 267689 267709 267719

Ø235 267549 267562 267690 267710 267720Ø230 253745 267550 267563 267691 267711 267721

Ø225 267535 267551 267564 267692 267712 267722Ø220 253744 267536 267552 267565 267693 267713 267723

Ø215 267523 267537 267553 267566 267694 267714 267724Ø210 253743 267524 267538 267554 267567 267695 267715 267725

Ø205 267512 267525 267539 267555 267568 267696 267726Ø200 267513 267526 267540 267556 267569 267697 267727

Ø195 267514 267527 267541 267557 267570 267728Ø190 267515 267528 267542 267558 267729

Ø185 267516 267529 267543Ø180 267517 267530 267544

Ø175 253741 267518 267531 267545Ø170 267504 267519 267532 267546

Ø165 267505 267520 267533 267547Ø160 267506 267521 267534 267548

Ø155 267507 267522Ø150 267508

Ø145 267509Ø140 267510

Ø135 267511Ø110 267324

Ø105 273885Ø100 273886

Ø95 273887Ø90 273888

W+ Pump Impeller

0800 801404FREEFAX:


23

W+ Pump Shaft Seal

POS DESCRIPTION MATERIAL PART NO.2-3-9-11 Complete seal housing for double seal AISI 316L 194448 194449

10 O-ring EPDM 772470 77136212 4 off screw 770496 770496

SHAFT SIZEØ25* Ø35*

Elastomer kit

5 2 off o-ring EPDM 772575 772577Viton 772576 772578

4 draining cylinder PTFE 77310 773101

POS DESCRIPTION MATERIAL PART NO.1-2-3-4 Complete for single seal fixing kit AISI 316L 772460 7724655-6-7-8 For single or double seal face kit SiC/Carbon EPDM 772461 772466

SiC/Carbon Viton 772462 772467SiC/SiC EPDM 772463 772468SiC/SiC Viton 772464 772469

12 4 off screw 770496 77049613 4 of Washer M6 701477 701477

SHAFT SIZEØ25* Ø35*

*Pump type see page 24/25

*Pump type see page 24/25



24

W+ Pump Standard Seal Kit

W+ Pump Shaft

Complete Stk/Qty Material Part No.1-2-3-4-5 - EPDM - SiC/SiC 800875 800800 800801 800802 800803 800804 800805 8008761-2-3-4-5 - EPDM - SiC/Carbon 800877 800915 800916 800917 800918 800919 800920 8008781-2-3-4-5 - Viton - SiC/SiC 800871 800813 800814 800815 800816 800817 800818 8008721-2-3-4-5 - Viton - SiC/Carbon 800873 800928 800929 800930 800931 800932 800933 8008741-2-3-4 1-2 EPDM1-2-3-4 1-2 Viton

5 1 SiC/SiC5 1 SiC/Carbon

W+55/35 W+55/60 W+60/110 W+65/350 W+70/40 W+80/80 W+110/1301-2-3-4-5 - EPDM - SiC/SiC 800806 800807 800808 800809 800810 800811 8008121-2-3-4-5 - EPDM - SiC/Carbon 800921 800922 800923 800924 800925 800926 8009271-2-3-4-5 - Viton - SiC/SiC 800819 800820 800821 800822 800823 800824 8008251-2-3-4-5 - Viton - SiC/Carbon 800934 800935 800936 800937 800938 800939 8009401-2-3-4 1-2 EPDM1-2-3-4 1-2 Viton

5 1 SiC/SiC5 1 SiC/Carbon

PUMP TYPEW+10/8 W+22/20 W+30/80 W+25/210 W+35/35 W+35/55 W+30/120 W+50/8

MOTOR80 90 100 112 132 160

SHAFT Ø25

PUMPTYPE

W+10/8 273844W+22/20 261546 261559 261560 261560 261547W+30/80 261559 261560 261560 261547 261548W+35/35 261559 261560 261560 261547 261548W+35/55 261559 261560 261560 261547 261548W+50/8 267329 267330 267330 267331W+55/35 261559 261560 261560 261547 261548

Pos.26ty 1 1 2 2 2 28 crew 701942 771199 771199 771199 771199 771199

0800 801404FREEFAX:


25

W+ Pump Shaft (contd)

PUMPMOTOR

TYPE90 100 112 132 160 180 200 225 250

SHAFT Ø35W+25/210 261551 261563 261552 261552W+30/120 261561 261562 261562 261550 261551 261563 261552W+55/60 261561 261562 261562 261550 261551 261563 261552W+60/110 261561 261562 261562 261550 261551 261563 261552 261552W+65/350 261550 261551 261563 261552 261552 261554W+70/40 261561 261562 261562 261550 261551 261563 261552W+80/80 261561 261562 261562 261550 261551 261563 261552 261552 261554W+110/130 261562 261562 261550 261551 261563 261552 261552 261554

Pos.2Quantity 2 2 2 2 2 2 2 2 3Screw 771199 771199 771199 771199 771199 771199 701231 701231 701231

Aseptic Centrifugal Pump WA+

POS QTY DESCRIPTION Wa+10/8 Wa+22/20 Wa+30/80 Wa+30/120 Wa+35/35 Wa+35/55**1 1 Back plate ***188739 ***261576 261577 261580 261578 261579

2 1 O-ring 772570 772571 772570 7725703 1 O-ring 773080 772594 771905 771908 771905 7719054 1 Shaft seal - see page 19 in the standard manual for W+ Pumps

*5 1 Extension frameMotor 80-112 ***188739 ***261576Motor 90-132 261586 274346 261586 261586Motor 160-250 261587 274347 261587 261587

POS QTY DESCRIPTION Wa+50/8 Wa+55/35 Wa+55/60 Wa+60/110 Wa+70/40 Wa+80/80**1 1 Back plate 182799 261581 261582 261583 261584 261585

2 1 O-ring 772571 772571 772571 772572 772573 7725743 1 O-ring 773087 771907 771907 771909 772047 7725934 1 Shaft seal - see page 19 in the standard manual for W+ Pumps

*5 1 Extension frameMotor 80-112Motor 90-132 800869 261588 261588 261590 261592 261594Motor 160-250 261589 261589 261591 261593 261595

This is a supplement for the standard W+ pump.The positions shown are included as standard in Wa+. The remaining components: See standard W+ section.

* Replace item No. 1 at page 56 in the standard manual for W+ pumps.** Replace item No. 7 at page 49 in the standard manual for W+ pumps.*** Identical drawing no. for backplate and extension frame.



26

Aseptic Centrifugal Pump WA+ (contd)

POS QTY DESCRIPTION PART NO.1 4 Union Elbow 1/8” RG 7730942 150cm PTFE tube OD. Ø6 mm/ID. Ø74 mm 7730953 20cm Guard pipe OD. Ø8 mm/ID. Ø6 mm 7730964* 4 Bushing 7730985 1 Cable binding strip 773099

Options6 2 Straight 7730974* 2-4 Bushing 773098

Bushing must be filted when used with plast tube.

0800 801404FREEFAX:


27

ZMS 3 & 4 Pump (50HZ & 60HZ)

ZMS 3 & 4 Pump Complete

ZMS 3 & 4 Pump Complete (contd)

ZMS 3 & 4 Shaft Seal



28

Pos Qty Description Part Number1 1 Cover 183038 183038 183038 1830382 1 O-ring - Nitrile 773202 773202 773203 773203

1 O-ring - EPDM 773206 773206 773207 7732073 1 Pump Housing 228942 228942 228929 2289294 1 Screw 179753 179753 179753 1797535 1 Impeller 240165 240165 240079 2400796 1 Shim 241335 241335 241335 2413357* 1 Shaft Seal8 4 Screw 700868 700868 700868 7008689 4 Nut 700242 700242 700242 700242

10 1 Deflector 400547 400547 400547 40054711 4 Screw 702996 702996 702996 70299612 4 Nut 700242 700242 700242 70024213 1 Motor 771818 771818 771818 77181814 1 Sleeve 242963 242963 242963 242963

50HZ 2.2KW 4KW 5KW60HZ 4.6KW 6.3KW

ZMS 3 ZMS 4MOTOR

*Separate spare-parts drawing below

Pos Qty Description Part Number- - Shaft seal 705522 7717031 1 Spring2 1 Sealing Lip3 1 Carbon Ring4 1 Stainless Steel Ring

*NBR EPDM

0800 801404FREEFAX:


29

ZMS 5 & 6 Pump Complete (50HZ & 60HZ)

Pos Qty Description Part Number1 1 Front plate 180195 180195 180195 180177 180177 1801772 1 O-Ring Nitrile 773204 773204 773204 773205 773205 773205

1 O-Ring EPDM 773208 773208 773208 773209 773209 7732093 1 Backplate 180196 180196 180196 180299 180299 1802994 1 Impeller -50Hz 168843 168843 168843 182504 1825045 1 Screw 770009 770009 770009 770009 770009 7700096 1 O-Ring Nitrile 724197 724197 724197 724197 724197 724197

1 O-Ring EPDM 771594 771594 771594 771594 771594 7715947* 1 Shaft Seal8 8 Screw 701107 701107 701107 701107 701107 7011079 1 Clamp Ring 179510 179510 179581 179581 179581 179581

10 1 Screw 701509 701509 701509 701509 701509 70150911 4 Screw 701078 701078 701078 701078 701078 70107812 1 Extension Frame 180290 180290 180290 168891 168891 16889113 4 Screw 703141 703141 703141 701474 701474 70147414 4 Nut 700242 700242 700242 701387 701387 70138715 1 Motor 771787 771788 772597 771808 771809 771809

50HZ 5.5KW 7.5KW 11KW 11KW 15KW 15KW60HZ 8.6KW 112.6KW 17KW 21KW

ZMS 5 ZMS 6MOTOR

*Separate spare-parts drawing see page 32



30

ZMS 5 Shaft Seal

Pos Qty Description Part Number1-5 - Shaft seal complete 771855 772328

1 1 O-ring 2 1 Rotating ring

(Stainless steel ring or SiC)3 1 Stationary Ring

(Carbon ring or SiC)4 1 O-ring 5 1 Wavy washer

(NITRIL) (EPDM)

6-7 - Retainer ring complete 179752 801067

6 1 Retainer ring 182957 1829577 1 O-ring (3,53x66,27) 771856 772037


8 1 Retainer ring 182958 1829589 1 O-ring (3,53x66,27) 771856 772037

10 1 Packing ring 770066 77006611 2 Elbow connector 770325 770325

Shaft seal with standard retainer ring


Shaft seal

Shaft seal with flushing kit




Pos Qty Description Part Number1-5 - Shaft seal complete 770026 772120

1 1 O-ring 2 1 Rotating ring

(Stainless steel ring or SiC)3 1 Stationary Ring

(Carbon ring or SiC)4 1 O-ring 5 1 Wavy washer

(NITRIL) (EPDM)


6 1 Retainer ring 182920 1829207 1 O-ring 770025 771580


8 1 Retainer ring 182919 1829199 1 O-ring 770025 771580

10 1 Packing ring 770067 77006711 2 Elbow connector 770325 770325


Shaft seal


ZMS 6 Shaft Seal

0800 801404FREEFAX:


31

ZMB PUMP

ZMB PUMP COMPLETE



32

Pos Qty Description Part Number1 4 Wing Nut 1698532 1 Pump Body 1687263 1 Cap Nut 2743874 1 O-Ring 7713635 1 Impeller Ø110 253765

Ø100 267370Ø90 267371

6 1 O-Ring 7730387 1 Shaft Seal 7731158 1 O-Ring 7730779 1 Back Plate 254113

10 1 Shaft 26154411 1 Set Screw 26788712 4 Screw13 1 Extension Frame 188795

Support Frame Complete14.1 1 Frame 26856614.2 6 Nut 70086414.3 3 Screw 70192814.4 4 Screw 70194214.5 4 Washer 70147814.6 4 Nut 70024114.7 2 Screw 700420

Seal Housing Complete15.1 1 Oilseal Ring 72306915.2 2 Union 77032515.3 1 Seal Housing 25448515.4 3 Conepoint Screw 70106515.5 1 O-Ring 771060

Motor Shroud Complete16.1 1 Motor Shroud 18844516.2 2 Screw 70042016.3 2 Nut 70024016.4 2 Washer 70147716.5 2 Bracket 27438416.6 1 Front Cover 18880916.7 2 Screw 700420

MOTOR MT80

ZMB PUMP

ZMB PUMP COMPLETE (contd)

0800 801404FREEFAX:


33

TPM+ 1&2 PumpTPM+ 1 Powder Mixer

Pos Qty Description Part Number1 1 Hopper 30l 175763 175763

Hopper 46l 175851 175851Hopper 1001 175852 175852

2 2 Clamp ring 169849 1698493 2 Seal -EPDM 770315 770315

2 -Viton 770813 7708134* 1 Butterfly valve s/p35 s/p35

4.1* 1 Delta Sv 1 manual s/p35 s/p351 Delta Sv 1 pneumatic

5 4 Wing Nut 155108 1551086 4 Stud 244036 2440367 1 Mixer Housing Top 182809 1828098 2 O-Ring -EPDM 773185 773185

2 -Viton 773186 7731869 1 Flange 277251 277251

10 1 Cap Nut (left thread) 274751 27475111 1 O-Ring -EPDM 772489 772489

1 -Viton 772490 77249012 1 Impeller 182811 18281113 1 Mixer Housing, Bottom 182810 18281014* 1 Shaft Seal s/p36 s/p3615 2 Nut, M5 701449 70144916 2 Screw, M5x10 700619 70061917 1 Collar 242501 24250118 1 Frame 168865 16886519 3 Nut 220594 22059420 3 Ball Type Foot 243836 24383621 3 Shank Screw 240495 24049522 7 Washer 701475 70147523 3 Nut, M12 700242 70024224 1 O-Ring -EPDM 771621 771621

1 -Viton 771622 77162225 1 O-Ring -EPDM 773187 77318726 1 Thrower 274541 27454127 1 Shaft (left thread) 277263 27726328 2 Screw, 8x30 771199 77119929 1 Extension Frame 135802 13580230 7 Screw, 12x25 701265 70126531 1 Motor32 1 Motor Shroud 260405 26040533 3 Screw, M5x10 700408 700408

MOTOR100-112 132

4KW 5.5-7.5KW



34

TPM+ 2 Powder Mixer

Pos Qty Description Part Number1 1 Hopper 100l 1691942 1 Clamp ring 1698503 1 Seal -EPDM 770316

1 -Viton 7708144* 1 Butterfly valve s/p35

4.1* 1 Delta Sv manual s/p351 Delta Sv pneumatic

5 1 O-Ring, NBR 7713186 1 Cover 1745267 1 Clamp Ring 1432888 1 Cap Nut (left thread) 2747519 1 O-Ring -EPDM 772489

1 -Viton 77249010 1 Impeller 18884911 1 O-Ring -EPDM 773191

1 -Viton 77319012 1 Mixer Housing 16867313 3 Stud 24049514* 1 Shaft Seal s/p3515 1 O-Ring -EPDM 77318716 1 Thrower 24754117 1 O-Ring -EPDM 773188

17.1 1 Water Rinse Ring 27453818 1 Pinol screw 77319419 1 O-Ring -EPDM 771621

1 -Viton 77162220* 1 Bearing Housing s/p3521 3 Washer 70147522 3 Nut 70062823 1 Base Plate 25340024 4 Screw 70023725 2 End Plate 27403926 10 Screw 70558427 2 Nut 70144928 2 Screw 70040829 1 Collar 16929730 4 Leg 25451231 4 Ball Type Foot 25450932 8 Washer 77077933 8 Nut 70317334 1 V-Belt Pulley 77075935 1 V-Belt 77077836 1 V-Belt Pulley 77075837 2 Eye Screw 17377238 4 Nut 70062539 1 Flange 25401140 4 Screw 70153341 2 Screw 70147442 2 Screw 70696243 1 Motor44 3 Screw 70040845 1 Motor Shroud 168711

45.1 1 Silencing Material 268520

MOTOR 160

0800 801404FREEFAX:


35

TPM+ 1&2 Butterfly Valve-Air Actuator-Handle

Pos Qty Description Part Number1 1 Delta SV Air Actuator * *2 1 Delta SV Handle 08-41-088/17 08-41-088/17

3-10 1 Complete -EPDM 801173 804408-Silicone 801174 804409-Viton 801175 804410

3 1 Valve Body 801170 8011714 1 Valve Flap 08-55-527/23 08-55-668/235 2 Sleeve 08-01-150/93 08-01-151/936 1 Valve Body 801170 8011727 1 Gasket -EPDM** 58-33-503/93 58-33-675/93

-Silicone 58-33-503/13 58-33-675/13-Viton 58-33-503/73 58-33-675/73

8 6 Screw 65-01-085/15 65-01-085/159 6 Nut 65-50-060/15

10 1 Plug 08-74-010/93

TPM+1 TPM+2

TPM+ 2 Bearing House

Pos Qty Description Part Number1 2 V-Ring NBR 7731892 8 Screw, M6x10 7704963 1 Bearing Cover 2745394 1 Bearing Housing 1687095 1 Ball Bearing 7038086 1 Shaft 2740437 1 Ball Bearing 7071448 1 Bearing Cover 255009



36

TPM+ 1&2 Shaft Seal

Pos Description Material Part NumberFixing Kit Single Seal: 772460 772465

1 Housing AISI 3162 Spring AISI 3163 Pressure Ring AISI 3164 Draining Cylinder PTFE (773100) (773101)

Fixing Kit Double Seal: 194448 1944492 Spring AISI 3163 Pressure Ring AISI 3169 Housing AISI 316

11 Pressure Ring AISI 316

Ø25 SHAFT Ø35 SHAFT

Pos Description Material Part NumberFace Kit Complete:SiC/Carbon seal rings EPDM O-rings 772461 772466SiC/Carbon seal rings Viton O-rings 772462 772467SiC/SiC seal rings EPDM O-rings 772463 772468SiC/SiC seal rings Viton O-rings 772464 772469Containing:

5 2 Piece O-Rings EPDM or Viton6 Stationary Seal Ring Carbon or SiC7 Rotation Seal Ring SiC8 Pin AISI 316


Pos Description Material Part NumberElastomer Kit With:

5 2 Piece O-Rings EPDM 772575 772577Viton (FPM) 772576 772578

10 1 Piece O-Ring EPDM 772470 771362(55,25 x 2,62) (63,17 x 2,62)

12 One Set of Screws With:4 Screws AISI 316 770496 770496

13 One Set of Washers With:4 Washers AISI 316 701477 701477


Single shaft seal complete: 1x Fixing kit (single) + 1 x Face kit + 1 x Pos. 12 + 1 x Pos. 13

Double seal complete: 1 x Fixing kit (double) + 2 x Face kit + 1 x Pos. 10 + 1 x Pos. 12

Wear parts single shaft seal: 1 x Face kit

Wear parts double shaft seal: 2 x Face kit

Rebuild from single to double seal: 1 x Fixing kit (double) + 1 x Face kit + 1 x Pos. 10

Rebuild from double to single seal: 1 x Fixing kit (single) + 1 x Pos. 13

Single Seal

Double Seal

pumps - moody · pdf file0800 801404freefax: freephone lines are open between 8.00am and...

Documents