pulley lagging - rema tip top

Pulley LaggingOur complete range of Pulley Lagging products.

2 PRODUCT PORTFOLIO© REMA TIP TOP 3

Pulley Lagging

REMAPERFORMANCEgrip

4

Premium pulley lagging.

REMAGRIP 7High quality pulley lagging.

UNIGRIP 18Pulley lagging.

UNILAG 21Pulley lagging.

Pulley Coating 22

Questionnaire 24


REMA PERFORMANCEgrip 70/CN – The premium pulley lagging material

REMA PERFORMANCEgrip 70/CN is more than a true all-rounder. The new premium pulleylagging material can be used as a lining material for driven and non driven pulleys in the wet as well as in the dry processing and can also withstand heaviest operating conditions. The profiling allows a high capacity for dirt absorption and in combination with excellent abrasion resistance and improved elongation to break, long service life is achieved. REMA PERFORMANCEgrip 70/CN is suitable for high tension and critical pulley applications.

Properties • Reduces slippage between belt and

pulley • Improves and stabilizes coefficient of

friction • Evacuation of moisture and dirt • Protects the pulley from wear and

corrosion • Prevents material build-up • Positive influence on belt tracking • Deep grooving to handle large amounts

of dirt and provide long operating life

• Simple and easy bond with CN-bonding layer

• Improved abrasion • Improved elongation at break

Area of application • Grooved rubber lagging for drive pulleys • Long belt conveyors • Large pulley diameters (from 800 mm) • For high-tension fabric and steelcord

belts of all strengths

REMA PERFORMANCEgrip 70/CN

PULLEY LAGGINGREMA PERFORMANCEgrip – Premium quality pulley lagging

Specifications

Polymer basis NR/BR DIN ISO 1629

Specific weight 1.12 g/cm³ DIN EN ISO 1183-1

Hardness 65 Shore A DIN ISO 7619-1

Profile 8 x 6 or 10 x 8 (Profile 50)

Colour Black

Ref. No. Designation Dimensions Profile Weight

521 0407 REMA PERFORMANCEgrip 70/CN 10 x 2 000 x 10 000 mm 8 x 6 mm 10.20 kg/m²





REMA PERFORMANCEgrip 70/CN

REMA PERFORMANCEgrip 70/CN-SL – The premium strip lagging

REMA PERFORMANCEgrip 70/CN - SL with excellent abrasion resistance, the values of improved elongation to break and effective evacuation of water, moisture and dirt. It‘s deep diamond profile and additional longitudinal grooves protect drums effectively and ensure stability in conveyor belt operation. The 343 millimeter width of the flooring strips can be flexibly cut to fit any drum width - both in the workshop and directly on site.

Properties • REMA PERFORMANCEgrip 70/CN-SL

premium quality with high abrasion resistance

• Reduces slippage between belt and pulley

• Improves and stabilizes coefficient of friction

• Evacuation of moisture and dirt • Protects the pulley from wear and


of dirt and provide long operating life • Simple and easy to bond with

CN-Bonding layer • Improved abrasion

• Improved elongation at break • Easy to cut to size with

REMA TIP TOP rubber cutting device Type 32 and attachment

Area of application • Grooved rubber lagging for drive pulleys • Long belt conveyors • Large pulley diameters (from 800 mm) • For high-tension fabric and steel

cordbelts of all strengths • Pulley width up to 10.000 mm

without circumferential seam • No loss when cutting to individual

pulley width • Joint sealing with the well-proven

T2-System

REMAGRIP 70/CN - SL strip lagging

Can be cut to size for strip lagging of the pulley (also on the equipment). Easy to cut to size with rubber cutting device Type 32 and attachment.

Specifications




Profile 8 x 6 mm (Profile 50)

Colour Black

REMA PERFORMANCEgrip 70/CN - SL strip lagging



REMA PERFORMANCEgrip 70/CN-SL – The premium strip lagging


Ref. No. Designation Dimensions

REMA PERFORMANCEgrip 70/CN SL 10 x 343 x 10 000mm




521 0306 REMA PERFORMANCEgrip 70/CN - SL 10 x 2060 x 10 000 mm

521 0309 REMA PERFORMANCEgrip 70/CN - SL 12 x 2 060 x 10 000 mm



REMAGRIP 50 – The universal lagging with high elasticity

REMAGRIP 50 has been designed for a variety of wet or dry applications and can beuniversally applied as a lagging for drive pulleys for low to medium-loaded fabric belts.Thanks to its excellent elasticity, REMAGRIP 50 also features excellent qualities for eliminating material build-up (also for non-driven pulleys).

Properties • Highly elastic, soft lagging for drive

pulleys • Reduces slippage between belt and

pulley • Improves and stabilizes coefficient of

friction • Evacuation of moisture and dirt • Protects the pulley against wear and

corrosion • Prevents material build-up • Positive influence on belt tracking • Excellent self-cleaning properties • CN bonding layer provides fast and good

adhesion

Area of application • Grooved rubber lagging for drive pulleys • For low to medium-loaded fabric belts • For short belt conveyers or small pulley

diameters (up to 800 mm)

REMAGRIP 50/CN

Ref. No. Designation Dimensions Weight

549 4548 REMAGRIP 50/CN 8 x 2 000 x 10 000 mm 8.56 kg/m²



Specifications

Polymer basis NR DIN ISO 1629



Profile 18 x 6 x 3 mm (Profile 20)

Colour Orange*

REMAGRIP 50B = 35 mmL = 18 mmS = 6 mmt = 3 mmd = 8/10/12 mm

REMAGRIP 50

*Please note that this is a product based on natural rubber and therefore variations in color may occur.

PULLEY LAGGINGREMAGRIP – High-quality pulley lagging


REMAGRIP 60B = 35 mmL = 18 mmS = 6 mmt = 3 mmd = 10/12 mm

REMAGRIP 60 WHITE OIL FOOD

REMAGRIP 60 WHITE OIL FOOD – The oil and grease resistant universal lagging with high wear resistance for food contact

REMALGRIP 60 WHITE OIL FOOD can be applied as a lagging for drive pulleys for a varietyof wet or dry applications. It fulfills the requirements for food contact and can be safely applied in any systems with hygiene requirements in accordance with: • Federal Institute for Risk Assessment, Recommendations on Food Contact Materials XXI,

Cat. 3+4 (Germany) • Regulation (EU) No. 1935/2004 • FDA Regulation No. 21 CFR 177.2600 • Required adhesive system for food contact: CEMENT SC 4000 white/HARDENER E-40

or CEMENT SC 2000 white/HARDENER ER-42 FDA Regulation No. 21 CFR 177.2600

Properties • Oil and grease resistant REMAGRIP 60

premium quality • Food quality • Reduces slippage between belt and pulley • Improves and stabilizes coefficient of

friction • Evacuation of moisture and dirt • Protects the pulley against wear and

corrosion • Prevents material build-up • Positive influence on belt tracking • CN bonding layer provides fast and good

adhesion

Area of application • Grooved rubber lagging for drive pulleys • For low to medium-loaded fabric belts • Small pulley diameters (up to 800 mm)

REMAGRIP 60 WHITE OIL FOOD/CN

Specifications

Polymer basis NBR DIN ISO 1629



Profile 18 x 6 x 3 mm (Profile 20)

Farbe White


549 5468 REMAGRIP 60 WHITE OIL FOOD/CN 8 x 2 000 x 10 000 mm 8.72 kg/m²

549 5477 REMAGRIP 60 WHITE OIL FOOD/CN 10 x 2 000 x 10 000 mm 11.20 kg/m²


REMAGRIP 70 – The universal lagging for heavy-duty operating conditions

REMAGRIP 70 has been designed for a variety of wet or dry applications and can beuniversally applied as a lagging for driven pulleys for heavy-loaded fabric and steelcordbelts. REMAGRIP 70 offers optimum abrasion resistance, the deep grooving enables tohandle large amounts of dirt and provides long operating life.

Properties • Reduces slippage between belt and pulley • Improves and stabilizes coefficient of



of dirt and provide long operating life • CN bonding layer provides fast and good

adhesion

Area of application • Grooved rubber lagging for drive pulleys • Long belt conveyors • Large pulley diameters (from 800 mm) • For high-tension fabric and steelcord


REMAGRIP 70/CN

Specifications

Polymer basis BR/IR/SBR DIN ISO 1629



Profile 8 x 6 oder 10 x 8 (Profile 50)

Colour Black


549 5798 REMAGRIP 70/CN 10 x 2 000 x 10 000 mm 8 x 6 mm 10.20 kg/m²





REMAGRIP 708 x 6:B = 86 mmL = 50 mmS = 8 mmt = 6 mmd = 10/12/15 mm

10 x 8:B = 86 mmL = 50 mmS = 10 mmt = 8 mmd = 15/20 mm

REMAGRIP 70



REMAGRIP 70 V – The self-extinguishing universal lagging for heavy-duty operating conditions

REMAGRIP 70 V is self-extinguishing and antistatic. It has been specially designed forchallenging ATEX operating conditions with high fire regulation or potentially explosiveenvironments such as coal mines or power plants for example.

Required adhesive system for antistatic rubber coatings: PRIMER PR 200 and CEMENT SC 4000 black/HARDENER ER-42 or CEMENT SC 2000 black/HARDENER UT-R 20. German underground approval: LOBA No. 18.43.21-89-33Polish underground approval: Dopuszczenie WUG Katowice No. B/1724/IV/2016

Properties • Self-extinguishing, antistatic REMAGRIP

70 premium quality • Moderate oil resistant • Reduces slippage between belt and pulley • Improves and stabilizes coefficient of


corrosion • Prevents material build-up • Positive influence on belt tracking

• Deep grooving to handle large amounts of dirt and provide long operating life

• CN bonding layer provides fast and good adhesion

Area of application • Grooved rubber lagging for drive pulleys • Long belt conveyors • Large pulley diameters (from 800 mm) • For high-tension fabric and steel cord


REMAGRIP 70 V/CN

Specifications

Polymer basis CR DIN ISO 1629



Electric resistance Antistatic*

Inflammability Self-extinguishing**

CN bonding layer Conductive, black


Colour Black


549 5853 REMAGRIP 70 V/CN 12 x 2 000 x 10 000 mm 8 x 6 mm 15.20 kg/m²



REMAGRIP 708 x 6:B = 86 mmL = 50 mmS = 8 mmt = 6 mmd = 12 mm

10 x 8:B = 86 mmL = 50 mmS = 10 mmt = 8 mmd = 15/20 mm

REMAGRIP 70 V

* Surface and volume resistivity < 1 x 10^6 Ohm, tested in accordance with DIN EN ISO 284, DIN IEC 93.**Fulfills DIN 22100-7 safety requirements (fire safety, hygiene, electrical).


REMAGRIP 70 HR – The heat resistant universal lagging for heavyduty operating conditions

REMAGRIP 70 HR has been specially designed as a lagging for drive pulleys in challengingoperating conditions with high-temperature environments. It is able to withstanda continuous thermal stress of 90°C and even short-term stresses of 110°C. Recommended adhesive system for heat resistant rubber lagging: PRIMER PR 200 and CEMENT PERFORMANCE 140 HT with HARDENER PERFORMANCE 140 HT.

Properties • Heat resistant REMAGRIP 70 premium

quality • Reduces slippage between belt and pulley • Improves and stabilizes coefficient of



of dirt and provide long operating life • CN bonding layer provides fast and good

adhesion

Area of application • Grooved rubber lagging for drive pulleys • Long belt conveyors • Large pulley diameters (from 800 mm) • For high-tension fabric and steel cord


REMAGRIP 70 HR/CN

Specifications

Polymer basis BR/IR DIN ISO 1629




Max. temperature up to 90 °C, short peaks up to 110 °C

Colour Black


549 5958 REMAGRIP 70 HR/CN 12 x 2 000 x 10 000 mm 8 x 6 mm 12.20 kg/m²

549 5972 REMAGRIP 70 HR/CN 15 x 2 000 x 10 000 mm 10 x 8 mm 14.05 kg/m²

REMAGRIP 708 x 6:B = 86 mmL = 50 mmS = 8 mmt = 6 mmd = 12 mm

10 x 8:B = 86 mmL = 50 mmS = 10 mmt = 8 mmd = 15 mm

REMAGRIP 70 HR



REMAGRIP 100 – The lagging for extremely wet operating conditions

REMAGRIP 100 has been specially designed as a lagging for drive pulleys in extremely wet operating conditions. REMAGRIP 100 offers optimum abrasion resistance, the knobbed surface enables to handle extreme environments such as wet operating conditions, clay or other smeary materials.

Properties • Excellent self-cleaning properties • Good belt tracking even in extremely wet

conditions and where there‘s increased risk of slippage

• Superior wear resistance • CN bonding layer provides fast and good

adhesion

Area of application • REMAGRIP 100 for lagging of drive

pulleys for light belt conveyors (up to EP 630)

• REMAGRIP 100 HD (heavy-duty) also for medium belt conveyors (up to EP 1250)

• Extremely difficult operating conditions (such as extremely wet conditions, clay or other smeary materials)

REMAGRIP 100/CN

Specifications




Colour Black

Ref. No. Designation Dimensions Knob height

539 4340 REMAGRIP 100/CN, Round knob shape 12 x 1 470 x 2 560 mm 6 mm

539 4333 REMAGRIP 100 HD/CN, Oval knob shape 18 x 300 x 2 400 mm 7 mm

REMAGRIP 100


REMAGRIP CK-X – The premium quality for extreme conditions

The “knobbly” surface of the ceramic tiles provides optimum grip on pulleys subject tohigh stress. Ceramic material is suitable for pulley lagging, thanks chiefly to its specificproperties of extremely high wear resistance provided by aluminium oxide (AL2O3). Itreplaces traditional materials, because it provides higher profitability by considerablyincreasing the service life and the efficiency of pulley laggings.

Properties • Vulcanised Al2O3 ceramic tiles • Single-row ceramic, with knobs • Highly resistant to wear • Elastic base made of REMALINE 70 or

REMALINE 70 V protects the belt

• Simple and durable affixing with REMA TIP TOP bonding systems

Area of application • Pulley lagging for pulleys operating

under extreme conditions • For wet, clay-containing, muddy and

abrasive materials • Also for belts under very high tension • Especially suitable for drive pulleys

subjected to extreme wear (CK-X)

REMAGRIP CK-X

Al2O3 ceramic with knobbed surface.

Specifications

Polymer basis NR/BR/SBR DIN ISO 1629



Colour Black

Ref. No. Designation Dimensions Width of ceramic area For belt width

539 7172 REMAGRIP CK-X 40 15 x 500 x 1 250 mm 840 mm 800 mm

539 6990 REMAGRIP CK-X 40 FS 15 x 500 x 1 250 mm 920 mm 900 mm

539 6980 REMAGRIP CK-X 45 15 x 500 x 1 500 mm 1 100 mm 1 000 mm


539 6960 REMAGRIP CK-X 50 FS 15 x 500 x 1 600 mm 1 450 mm 1 400 mm









REMAGRIP CK-X



REMAGRIP CK-X V

REMAGRIP CK-X V is self-extinguishing, antistatic and moderate oil resistant. Ithas been specially designed for ATEX operating conditions with high fire regulationor potentially explosive environments such as coal mines or power plants for example.

Required adhesive system for antistatic rubber coatings:PRIMER PR 200 and CEMENT SC 4000 black/HARDENER ER-42 or CEMENT SC 2000 black/HARDENER UT-R 20.

German underground approval: LOBA No. 18.43.21-89-33Polish underground approval: Dopuszczenie WUG Katowice No. B/1724/IV/2016


539 7250 REMAGRIP CK-X 50 V 15 x 500 x 1 600 mm 1 200 mm 1 200 mm




REMAGRIP CK-X V


Specifications

Polymer basis CR DIN ISO 1629



Electric resistance Antistatic*

Inflammability Self-extinguishing**

CN bonding layer Conductive, black

Colour Black

* Surface and volume resistivity < 1 x 10^6 Ohm, tested in accordance with DIN EN ISO 284, DIN IEC 93.**Fulfills DIN 22100-7 safety requirements (fire safety, hygiene, electrical).

REMAGRIP CK-X HDX (Extra Heavy Duty) – For continuous grip under extra heavy-duty conditions

CK-X pulley lagging with 25 mm total lagging thickness. REMAGRIP CK-X HDX is designed to maximum forces in all dimensions. Besides the even thicker rubber base (allows more deformation under the belt) REMAGRIP CK-X HDX features 11 mm thick tiles with a further improved embedding into the rubber matrix. The highly elastic rubber base is optimizedfor maximum dynamic performance over years. This pulley lagging allows optimum drive force transmission on highest tension belts even under extreme conditions while providing optimum protection for your conveyor belt.


539 9440 REMAGRIP CK-X 60 HDX 25 x 500 x 1 500 mm 1610 mm 1500 mm

539 9450 REMAGRIP CK-X 70 HDX 25 x 500 x 2 100 mm 1 720 mm 1 600 mm




REMAGRIP CK-X HDX


REMAGRIP CK-X HD (Heavy Duty) – For continuous grip under heavy-duty conditions

CK-X pulley lagging with 20 mm total lagging thickness. The thicker rubber matrix of REMAGRIP CK-X HD allows more deflection of the tiles under the belt. This property provides additional reserves with extreme belt tensions, especially in combination with fabric belts with high elongation or low cover thickness on the running side.


539 7167 REMAGRIP CK-X 50 HD 20 x 500 x 1 600 mm 1 200 mm 1 200 mm



539 7271 REMAGRIP CK-X 90 HD FS 20 x 500 x 2 500 mm 2 420 mm 2 400 mm


REMAGRIP CK-X HD


REMAGRIP CP-X – The benchmark for wear resistance

The plain surface of the ceramic tiles is highly efficient, particularly on non-drive pulleys(ranging from tail pulleys to snub pulleys) which are subject to high wear.

Properties • Vulcanised alumina oxide (Al2O3)

ceramic tiles • Single-row ceramic, plain • Highly resistant to wear • Elastic base protects the belt • Simple and durable affixing with

REMA TIP TOP bonding systems

Area of application • Pulley lagging for pulleys operating

under extreme conditions • For wet, clay-containing, muddy and

abrasive materials • Also for very high belt tensions • For tail pulleys subjected to extreme

wear • For non-powered drums

REMAGRIP CP-X

Plain alumina oxide (Al2O3) ceramic.

Specifications




Colour Black


539 7240 REMAGRIP CP-X 60 15 x 500 x 1 900 mm 1 600 mm 1 500 mm




REMAGRIP CP-X


Note: Available in V Quality (FRAS).

522 0780

Cover strip CK-X / CP-X

CN crowning wedge

Properties • Cost-effective crowning for pulleys • Improves belt tracking, especially for

uneven loading of the material

Area of application • Conveyor belts with fabric plies

CN crowning wedge

Cover strip CK-X / CP-X

Properties • CN bonding layer • Highly elastic • Wear-resistant

Area of application • Superior sealing of butt joints for

REMAGRIP CK-X and CP-X pulley lagging • Especially for powdery materials or in

critical climates • Additional protection against infiltration

of corrosion

528 5545

Ref. No. Designation Dimensions

528 5545 CN crowning wedge 1/3 x 255 x 2 500 mm


Ref. No. Designation Dimensions VPE

522 0780 Cover strip CK-X / CP-X 1.5 x 28 x 10 000 mm 5

Pulley crowning with CN Crowning wedge and CN Filler rubber

Pulley face CN Filler rubber 3 mm CN Crowning wedge


UNIGRIP 60

UNIGRIP 60 can be universally applied as a pulley lagging for simple applications.

Properties • Reduces slippage between belt and pulley • Increases and stabilizes the coefficient

of friction • Evacuation of moisture and dirt • Protects the pulley against wear and

corrosion • Prevents material build-up • Positive effect on tracking • Wear-resistant material quality

Area of application • Profile tread for drive pulleys • For low to averagely loaded textile

conveyor belts • Small pulley diameters (up to 800 mm)

UNIGRIP 60/KS


550 3700 UNIGRIP 60/KS 8 x 2 000 x 10 000 mm 8.45 kg/m²

550 3710 UNIGRIP 60/KS 10 x 2 000 x 10 000 mm 10.92 kg/m²

PULLEY LAGGINGUNIGRIP – Pulley lagging

Specifications




Colour Black

UNIGRIP 60B = 35 mmL = 18 mmS = 6 mmt = 3 mmd = 8/10 mm

Note: Available in FRAS (VH60).

UNIGRIP 250 SL

UNIGRIP SL 250 can be universally applied as a pulley lagging for simple applications.The striplagging allows simple handling even for application in the conveyor system.The 10 meter longrolls can be cut to size for any pulley width with minimum waste.

Properties • Reduces slippage between belt

and pulley • Increases and stabilizes the

coefficient of friction • Evacuation of moisture and dirt • Protects the pulley against wear

and corrosion • Prevents material buildup • Positive influence on belt tracking • Wear-resistant material quality

Area of application • Profile tread for drive pulleys • For low to averagely loaded textile

conveyor belts • Small pulley diameters (up to 800 mm)

UNIGRIP SL 250/KS


UNIGRIP SL 250 12 x 250 x 80 000mm

UNIGRIP SL 250 FRAS 12 x 250 x 10 000mm

UNIGRIP SL 250 FRAS 12 x 250 x 80 000mm

550 7861 UNIGRIP SL 250/KS 10 x 250 x 10 000 mm 22.7 kg/roll



Specifications




Colour Black



Special properties*

UNIGRIP VH/60 FRAS

UNIGRIP POLYURETHANE


UNIGRIP CR-L 385 - Standard ceramic pulley lagging material

UNIGRIP CR-L 385 is the specially-designed pulley lagging material with ceramic inserts for high wear resistance. With good performance in wet, muddy, or dry conditions,UNIGRIP CR-L 385 provide a effective solution to solve your conveyor drive problems and enhance production efficiency of the whole system.

Properties • Eliminates belt slippage • 45% ceramic tiles coverage provide

larger contact surface between belt and ceramic

• Unique design of ceramic tiles with the raised “knob” that increases friction between conveyor belts and pulleys

• Improve the system stability Increased belt and pulley service life

• Long-term system benefits • Belt tension can be reduced, which

means lower energy consumption, lower wear of whole system and lower cost per ton

• F.R.A.S (Fire Resistant Anti Static) products available on request

Area of application • Especially suitable for wet and muddy

conditions where belt slippage occurs

Product range • Thickness: 12 mm • Width: 385 mm • Length: 10 000 mm

UNIGRIP CR-L 385

Specifications

Hardness 62 shoreA

Abrasion 150 mm3

Colour Black

Content of aluminium oxide 92 %

Open porosity 0 % acc. to DIN EN 60 672 0

E-Module 300 GPa acc. to DIN EN 60 672 0

Density 3,65 g/cm3 acc. to DIN EN 60 672 0



UNILAG

UNILAG can be universally applied as a pulley lagging for simple applications.

Properties • Symmetrical profile - for use in

horizontal and vertical directions • Scrap is reduced to a minimum • Cost-efficient material • Evacuation of moisture and dirt • Protects the pulley against wear and

corrosion • Prevents material build-up • Positive influence on belt tracking • Material is wear resistant

Area of application • Grooved rubber lagging for drive pulleys • For low to medium-loaded fabric belts

UNILAG/KS


550 3636 UNILAG/KS 8 x 2 000 x 10 000 mm 6.4 kg/m²




Specifications




Colour Black

UNILAGD = 30 mmt = 5 (4) mmd = 8/10/12/15 mm

PULLEY LAGGINGUNILAG – Pulley lagging

Special properties*

UNIGRIP CR-L 385 VH/60 FRAS


Pulley coating wirh rubber by means of hot coating process

Pulley coating wirh PU by means of hot casting process

Pulley coating by means of hot coating or hot casting processes enable a tailor-made protection of the pulley from wear and corrosion perfectly fitted to the particular application and operating condition.

Properties • Typical hardness: 45 - 75 Shore A • Wear-resistant, ATEX-suitable • Self-extinguishing or low flammability

version available on request

• Pulley shape: cylindric or curved Profile shape: waffle, diamond and arrowhead pattern or round profile

• Ceramic coating: CK-X “hot”, with 15, 20 or 25 mm thickness

Properties • Typical hardness: 60 - 90 Shore A • Highly wear-resistant, notch-resistant • Superior mechanical load capability, cut

resistant

• Resists hydrolysis • Pulley shape: cylindric or curved • Profile shape: waffle, diamond and

arrowhead pattern or round profile

Paramaters for hot coating

Max diameter 2900 mm

Max total length 7200 mm

Max weight per piece 30 t

PULLEY LAGGINGPulley Coating

For detailed information, please visit rema-tiptop.com.au, contact your local REMA TIP TOP representative or email [email protected]

Paramaters for hot coating

Max diameter 2900 mm

Max total length 4900 mm

Max weight per piece 10 t

Content of aluminium oxide 800 kg/piece

QUESTIONNAIREPulley lagging

General information on conveyor system

Manufacturer/OEM:

Maintained by:

Type of plant:

Year built:

Location � Outside � Roofed over � Closed room � Underground

Temperature °C Min. °C Max. °C

Carrying capacity Ø t/h

Operating times Day h/d Week d/w

Conveying direction � horizontal � rising � falling

Please attach pictures! If possible, attach a drawing of the conveying system!

Information on drive / If more than three drive pulleys, please record in notes

Speed v= m/s

Drive power [kW]

Pulley Ø[mm]

Wrap angle[ ° ]

T1 Start[kN]

T1 Running[kN]

T2 Start[kN]

T2 Running[kN]

Pulley 1:

Pulley 2:

Pulley 3:

Drive on � System head � System foot � Multiple

Reversing operation � Yes � No

Information on material being conveyed

Designation:

Min. lump size Max. mm Specific weight g/cm3

Moisture % Temperature °C

Oil/grease or chemicals � No � If yes, which kind:

Please attach pictures!

Customer: Contact person:

Phone: Fax:

Address: Country (representation):

E-Mail:

Place and date Name Signature


QUESTIONNAIREPulley lagging

Information about conveyor belt

Belt type � Fabric belt � Steel cord belt � PVC/PVG

Manufacturer: Designation:

Strength: Pretension kN

Troughing transition m Belt trough º

Dimensions Width mm Thickness mm Length mm

Cover plate thickness Running side mm Conveying side mm

Condition � New � Used � Damaged

Splice type � Cold � Hot � Mechanical

Information on pulley / If multiple drives, please record data in notes

Type of pulley � Drive � Bend pulley � Snub pulley

Pulley width B1 mm B2 mm B3 mm

Crown bow � Yes � Yes � Yes

Old lagging

Manufacturer: Type:

Lagging thickness: mm Service life:

Problem:

Required quality � V � S � HR � OIL


New lagging

Lagging thickness: mm Type:

Date installed: Planned service life:

Special quality � V � HR � OIL


Notes, special details!

Customer: Contact person:

Phone: Fax:

Address: Country (representation):

E-Mail:

Place and date Name Signature

NOTES

Copyright © 2020 REMA TIP TOP AG

All information is given to the best of our knowledge. All specifications are to be considered non-binding information. Any claim for damages of any kind is excluded. We reserve the right to change technical specifications without prior notice, provided that they ensure product improvement. The information presented is based on technical experience but does not guarantee a product’s suitability for specific applications, and does not relieve the users of the responsibility to undertake their own testing, including where any third-party trademark rights are concerned. For special applications and operating conditions with regard to temperature, UV light, ozone, acids and alkaline solutions, dynamic and static forces, tensions, elongations and other influences, contact your local REMA TIP TOP distributor for technical advice.

Operating and working instructions, product information and general instructions on the vulcanization properties of natural and synthetic rubber should be followed carefully. The mechanical and physical values presented for our products only apply to the material listed (without bonding layer and without fabric) based on the accompanying inspections for approval; these represent statistical product data, but not guaranteed product properties. Detailed technical data sheets for each single product are available upon request. The weight indications (kg/m², kg/m, etc.) solely represent statistical values and are not necessarily identical to the actual weights. The weights indicated are merely guidelines for the handling, transport and application of our products. The dimension tolerances are based on part 5 of DIN 7715, classification P3 (admissible dimension tolerances for sheets) and DIN ISO 3302-1, classification M4 (molded parts made of soft-rubber). Other tolerances of specific products for special applications are subject to a mutual agreement and must be stipulated in a special contract. Products containing hazardous substances are labeled in accordance with the regulations (EG) No. 1907/2006 for the

classification, packaging and labeling of hazardous materials and preparations.

In order to preserve product properties, the storage conditions indicated in DIN 7716 should be followed (including storing the product in the original package and in an area that is dry, cool and dark).

Products printed in bold are normally available from stock.

LEGAL NOTICE

Talk to our team today

[email protected]

rema-tiptop.com.au

Dandenong

Brisbane

Newman

Adelaide

Mackay

Perth

Gladstone

79 Elwell Close,Beresfield, NSW 2322

2 Venture Court,Dandenong South, VIC 3175

52 Wentworth Place,Northgate, QLD 4014

21 Pardoo Street,Newman, WA 6753

29-33 Maggiolo Drive,Paget, QLD 4740

102 Kurnall Road,Welshpool, WA 6106

3 McCabe Street,Gladstone, QLD 4680

02 4935 0200

03 8786 3333

07 3710 8833

08 6253 1900

08 8169 2850

07 4953 9100

08 6253 1900

07 3710 8820

Beresfield (Head Office)

pulley lagging - rema tip top

Documents