Turn

in

g Your Assets into Dollars

Public AuctionSHOP

CLOSED

EVERYTHING

MUST SELL!

Asset Sales, Inc.Corporate Headquarters

301 Post Office Drive, Suite CIndian Trail, NC 28079

Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com info@asset-sales.com

European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH

Tel / Fax 07836.347880peteraml@asset-sales.co.uk

Asset Sales (Canada) Inc.4310 Prospect Road

Bayside, Nova Scotia, Canada B3Z 1L5Tel 902.852.5331 Fax 704.821.4325

gmuller@asset-sales.ca

PLANT CLOSED

IDEAL TOOL & DIE COMPANYBORING MILLS, MILLING MACHINES, CNC MACHINERY & MANUAL LATHES

3021 BANK STREET - CHARLOTTE, NC 28203TUESDAY, OCTOBER 11TH @ 10:00 A.M. EDT

DEFUM WFB-80 3-1/4" HORIZONTAL BORING MILL

OKUMA CADET-MATE VERTICAL MACHINING CENTER

MAZAK HERCULES / AJAX GEARED HEAD ENGINE LATHE

>SCHIESS 63/78

VERTICAL BORING MILL

Inspection: Monday, October

10th, From 8:00 A.M. -

4:00 P.M. EDT

ROTARYTABLE

78"SWING

105416_Ideal.indd 1 9/13/16 4:01 PM

MACHINERY INSPECTION DATE & TIME – MONDAY, OCTOBER 10TH FROM 8:00 A.M. - 4:00 P.M. EDT

2

HORIZONTAL BORING MILLDEFUM Model WFB-80 Horizontal Boring Mill with 41" x 43" Rotary Table, 3” Spindle Diameter, 59” X-Axis Travel, 47” Y-Axis, 59” Z-Axis, Spindle Speeds to 1,400 RPM, 18-1/2” Facing Head, TRAK 103 3-Axis DRO, TRAK 101 1-Axis DRO, Pendant Control, sn:6000

Outboard Support Tailstock, Tooling & Spindle Stiffeners for DEFUM

(2) 8” x 38” x 36” Angle Plates

VERTICAL MACHINING CENTEROKUMA Cadet-Mate Vertical Machining Center with 20" x 40" Table, 40” X-Axis Travel, 20” Y-Axis, 20” Z-Axis, #40 Taper Spindle, 20 ATC, Chip Pan, Flood Coolant, OSP-700M CNC Control with Remote Pulse Generator, sn:0157

CNC & MANUAL TURRET LATHESSCHIESS 63” Vertical Boring Mill with 63" 4-Jaw Table, 78” Swing, Ram, Turret, Side Head, Rapid Feed, Swivel Vertical Grinding Spindle, Approx. 50” Under Rail, 2-Axis TRAK 102 DRO, sn:75564

BULLARD 54” CNC Vertical Turret Lathe with Approx. 64” Swing, Table Speeds to Approx. 160 RPM, Turret Head, 4 Position Turret Head, Approx. 68” Under Rail, Coolant, FANUC Series 0-T CNC Pendant Control, sn:26823

BULLARD 42" Spiral Drive Vertical Turret Lathe with 42” 4-Jaw Table, 46” Swing, Table Speeds to Approx. 100 RPM, Turret Head, Side Head, Approx. 33” Distance Under Rail, Coolant System, 30 HP, (2) 2-Axis TRAK 102 DRO, sn:21065

DEFUM WFB-80 HORIZONTAL BORING MILL

SCHIESS 63" VERTICAL BORING MILL

OKUMA CADET-MATE VERTICAL MACHINING CENTER

BULLARD 54" CNC VERTICAL TURRET LATHE

78"SWING

FACINGHEAD

FANUCCONTROL

105416_Ideal.indd 2 9/13/16 4:01 PM

AUCTION SALE DATE & TIME – TUESDAY, OCTOBER 11TH @ 10:00 A.M. EDT

3

BULLARD 42" SPIRAL DRIVE VERTICAL TURRET LATHE

ENGINE LATHESBETTS-BRIDGEFORD Heavy Duty Engine Lathe with 48" Swing x 196" Centers, 42” 4-Jaw Chuck, Tailstock, Toolpost, 3.95 – 100 RPM, 2” Hole, Inch Threading, 2-Axis ACU-RITE TURNMATE DRO, sn:CS-47

TONG-IL Model TIPL-5 21” x 61” Engine Lathe with 26” Swing x 61” Centers, 20” 4-Jaw Chuck, Tailstock, Toolpost, Rapid Traverse, 33-1,070 RPM, 3” Hole, Inch / Metric Threading, 2-Axis TRAK 102 DRO, sn:0B00801555

TONG-IL Accessories: Steady Rest, Extra Chucks & Tooling

MAZAK (HERCULES/AJAX) Model 18 Engine Lathe with 18" Swing x 80" Centers, 14” 4-Jaw Chuck, Tailstock, Toolpost, Taper Attachment, Rapid Traverse, 25-1.500 RPM, 2” Hole, Inch / Metric Threading, Coolant, 2-Axis TRAK 102 DRO, Chip Pans, sn:8365 (6124)

Extra Chucks & Steady Rest

VECTRAX Model 1550 EVS Engine Lathe with 15" Swing x 50" Centers, Collet Chuck, Tailstock, Toolpost, Taper Attachment, Rapid Traverse, 18-2,500 RPM, Approx. 2” Hole, Inch / Metric Threading, Coolant, 2-Axis ACU-RITE DRO, sn:5638

LOGAN Model 2555-V Shop Lathe with 12” Swing x 18” Centers, 6” 3-Jaw Chuck, Tailstock, 40-1,400 RPM, Approx. 1” Hole Size, Threading, Extra Tooling

BETTS-BRIDGEFORD HEAVY DUTY ENGINE LATHE TONG-IL TIPL-5 21" X 61" ENGINE LATHE

MAZAK HERCULES/AJAX 18 ENGINE LATHE VECTRAX 1550 EVS ENGINE LATHE

Download a lot book at www.asset-sales.com

48"SWING

105416_Ideal.indd 3 9/13/16 4:02 PM

MACHINERY INSPECTION DATE & TIME – MONDAY, OCTOBER 10TH FROM 8:00 A.M. - 4:00 P.M. EDT

4

TURNING CENTERSWHACHEON Model Ecostar 2 CNC Turning Center with Approx. 20” Swing x Approx. 23” Center, 8" 3-Jaw Chuck, 12 Station Turret, FANUC 0-T CNC Control, sn:8907-70

VERTICAL MILLING MACHINESATRUMP Model K6F Variable Speed Vertical Milling Machine with 11" x 58" T-Slot Table, Servo Power Table Feed, Servo Power Knee Feed, 6 HP, #40 Taper Variable Spindle Speeds to 3,950 RPM, 2-Axis SONY DRO, Power Draw Bar, Coolant, Pendant Control, sn:K6F-016

(2) ATRUMP Model K4V Vertical Milling Machines with 11" x 58" T-Slot Table, Servo Power Table Feed, Servo Power Knee Feed, #40 Taper Variable Spindle Speeds to 4,200 RPM, 2-Axis SONY Millman DRO, Power Draw Bar, Coolant, Pendant Control, sn:K4V-162 ● sn:K4V-128,

ATRUMP Model K2V Vertical Milling Machine with 9" x 49" Table, Servo Power Table Feed, Variable Spindle Speeds to 4,200 RPM, Collet Holder, Coolant, 2-Axis SONY Millman DRO, sn:K2V-144

BRIDGEPORT Series 1 Vertical Milling Machine with 9" x 42" T-Slot Table, 2 HP, Variable Speeds to 4,200 RPM, Collet Holder, 2-Axis SONY Millman DRO, sn:243421

WHACHEON ECOSTAR 2 CNC TURNING CENTER

ATRUMP K6F VERTICAL MILLING MACHINE

<BRIDGEPORT SERIES 1 VERTICAL MILLING MACHINE

(2) ATRUMP K4V VERTICAL MILLING MACHINES

>ATRUMP K2V

VERTICAL MILLING MACHINE

Can’t Attend the Sale? Still Want to Bid? Visit Our Website at

www.asset-sales.com For More Bidding Options. Check Out Our Upcoming

Auction Calendar! You Can Also Sign Up to Receive Email Notifications by Joining

Our Mailing List!

4AVAIL.

LATEMODEL

LATEMODEL

105416_Ideal.indd 4 9/13/16 4:02 PM

AUCTION SALE DATE & TIME – TUESDAY, OCTOBER 11TH @ 10:00 A.M. EDT

5

BROWN & SHARPE NO.2 14" X 30" UNIVERSAL GRINDER

DEVLEIG 43J40 JIG MILL MILLING MACHINE BLANCHARD NO.18/42 SURFACE GRINDER

JIG MILLDEVLEIG Model 43J40 Jig Mill Milling Machine with 40" x 30" Table, 4” Spindle, Approx. 36” Vertical Travel, #50 Taper Spindle Speeds to 3,000 RPM, ALLEN BRADLEY CNC Controls, sn:9531

Tooling & Accessories for Jig Mill • 20-1/2” W x 40” H x 23” D T-Slotted Angle Plate

EDMHITACHI Model CRET406 Wire EDM Machine with Fanuc 6M CNC Control, Parts Machine, sn:H92284

GRINDERSBROWN & SHARPE No. 2 14” Swing x 30” Centers Universal Cylindrical Grinder with 8” 4-Jaw Chuck, sn:4936

CINCINNATI 12" x 36" Centers Universal Cylindrical Grinder with Swing Down Internal, 12” Grinding Wheel, Coolant, sn:IU3D1H

PARKER-MAJESTIC 6" x 18" Hand Feed Surface Grinder No.2 with Light, sn:684-SX-54

BROWN & SHARPE Micromaster Reciprocating Grinder with 12" x 36" Magnetic Chuck, Automatic Downfeed, Over Wheel Dresser, Coolant, sn:523-1236-416

BROWN & SHARPE Micromaster Grinder with I0" x 24" Chuck, Neutrofier II, sn:523-1024-244

BLANCHARD No.18/42 Surface Grinder with 42" Magnetic Rotary Table, 25 HP, Dry Base, Coolant, sn:7282

CINCINNATI 12" X 36" UNIVERSAL CYLINDRICAL GRINDER

BROWN & SHARPE MICROMASTER RECIPROCATING GRINDER

CASER FR6/40 5' X 13" RADIAL ARM DRILL SUMMIT 3' X 8" RADIAL ARM DRILL

RADIAL ARM DRILLSCASER Model FR6/40 5’ x 13" Radial Arm Drill with 45-2000 RPM, Power Elevation, Clamping, Coolant Pump, Fixture L-Base, sn:1412

SUMMIT 3' x 8" Radial Arm Drill with 40-2000 RPM, Power Elevation, Clamping, L-Base, sn:1899

Radial Arm Drill Box Table 21-1/2”L x 18-1/2”W x 19”H

42"TABLE

105416_Ideal.indd 5 9/13/16 4:02 PM

MACHINERY INSPECTION DATE & TIME – MONDAY, OCTOBER 10TH FROM 8:00 A.M. - 4:00 P.M. EDT

6

MISCELLANEOUS MACHINERYDAKE Model 23-152 150 Ton H-Frame Shop Press with 36" Between Uprights, 24" x 36" Bed Area, 6" Diameter Ram, sn:147611

MILLER Model CP-250TS Welder with Miller-Matic Wire Feed, sn:S420448

MILLER Synchrowave 200 Welder, sn:LJ220437L

LUCIFER Model DL86K24 2000° Electric Furnace (Drawing Oven), sn:6349

BLAST-IT-ALL Model 4030 Blast Cabinet with 2 Arm Hole, Gloves, Dust Collector, sn:340068

SUNNEN Model MA Honing Machine, sn:7543

SUNNEN Model MBB-1680C Power Stroke with Automatic Honing Machine, sn:72013

POWERMATIC Model 30 Belt / Disc Sander with 6” Belt x 12” Disc, sn:67-8900

SETCO Pedestal Grinder Type 7BAS5P Y HP, sn:67948

DELTA Carbide Tool Grinder

CLARK 3 HP Pedestal Grinder, sn:95531

MATERIAL HANDLING EQUIPMENTTCM Model FCG35N5 7000lbs Capacity Propane Forklift with 53” Forks, 2 Stage Mast, sn:58400116

CLARK Model C-300-50 5000lbs Capacity Forklift with Cage, Propane, 4’ Forks, Single Stage Mast, Pneumatic Tires, sn:356-25-5145

Style 50 5000lb Capacity Portable Die Cart Handler, sn:28675

JET Pallet Jack 5000lb Capacity

SHAW-BOX 5 Ton Underslung Bridge Crane with 5 Ton Hoist, 30’ Span, Approx. 15’ Under Hook, Pendant Control

DOALL 2012-1H3 VERTICAL BAND SAWDOALL C-1216M HORIZONTAL BAND SAW

KAESER ADS40S ROTARY AIR COMPRESSOR

CLARK 5000LB CAPACITY FORKLIFT

SHAW-BOX 5 TON BRIDGE CRANE

VERTICAL & HORIZONTAL BAND SAWS

DOALL Model C-1216M Semi-Automatic Horizontal Band Saw with Clamping, 12” x 16” Capacity, 1-1/4” Blade Size, 78” Power Roller Conveyor, sn:424-88110

DOALL Model 2012-1H3 Vertical Band Saw with 24” x 31” Slotted Hydraulic Table, 19-3/4” Throat Depth, Welding, Shearing & Grinding Attachment, 1” Blade Size, Coolant, Work Light, sn:354-76102

AIR COMPRESSOR & DRYERKAESER Model ASD40S Rotary Air Compressor with Sigma PC Control, 40 HP, sn:1164, mfg.2008

INGERSOLL RAND Dryer with Approx. 400 Gallon Tank

Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport or Rig Items. Buyers May Pick Up Their Items at the Auction Location or Can Arrange for a Third Party

Logistics Firm to Manage the Removal Process for Them.

2008

105416_Ideal.indd 6 9/13/16 4:03 PM

AUCTION SALE DATE & TIME – TUESDAY, OCTOBER 11TH @ 10:00 A.M. EDT

7

MISCELLANEOUS SOLBERGA 20" Geared Head Pedestal Drill Press with 18" x 22" Production Table, sn:1106 ● SUNNEN HONE Tooling ● Scrap Metal with Steel Shelving ● Heavy Duty KURT Vises ● Large Assortment of CAT 40 Taper Tooling ● (2) 30" x 60" Steel Tables ● (8) 30" x 60" Wood Top Tables ● WESCO Die Cart ● DORIAN Right Angle Attachment ● Adjustable 2-Piece Vise ● I0" x 15" Tilting Table ● Height Gage ● (7) Boxes of Drill Index ● 6" Toolmaker's Vise ● WILTON Bench Vise ● Ideal Electric Etcher ● (7+) Clamping Kits ● (6) Milling Machine Vises ● R-8 Collet Sets ● ATRUMP 40-Taper Right Angle Milling Attachment ● DUMORE Toolpost Grinder ● BRIDGEPORT Right Angle Attachment ● Portable Buffing/Grinding Machine ● 6" HN Index Fixture with BUCK 6-Jaw Chuck & Tailstock ● 7" L&W Universal Index Head with 6" 6-Jaw PRATT-BERNERD Chuck &Tail Stock ● Shop Vacuum ● 15" Horizontal / Vertical Rotary Table ● Bench Top Filer ● CUSHMAN 12" HN Rotary Table ● HARIG SC Fixture ● Radius Dresser ● 36" x 48" x 8-1/2" Black Granite Table ● Ledge on Fabricated Stand ● MAG-VEE Blocks ● Joe Blocks ● 6" x 6" TAFT-PIERCE Compound Sine Chuck ● 5C Spin Fixture ● HARIG #1 Grind-All ● SIMCO Micro Grind Fixture ● CHALLENGE 24" x 24" Black Granite Surface Plate ● (12) Assorted Angle Plates and Grinding Fixtures ● (3) Precision Grinding Vises ● 6" x 6" Compound Sine Fixture ● Line-Boring Attachment for DEFUM HBM ● Rack with Approximately 50 Lifting Hooks and C-Clamps ● Stock Reel ● Assorted Carousels with Hardware ● MILWAUKEE Portable Magnetic Base Drill ● 60" Diameter Welding Table ● WILSON Model lJR Rockwell Hardness Tester ● MICRO-VIEW Model 30 Comparator ● Tapping Set ● Large Assortment of Micrometers ● PRECISE Grinding Attachments ● Center Finders ● Hand Tools ● Power Tools ● (12) Heavy Duty Machinery Leveling Pads ● 57" x 120" Work Table ● 14" Chop Saw ● Dump Style Hoppers ● KALAMAZOO 1” Belt Grinder ● Aluminum Dock Plate ● Plus Much More!!

Download a lot book at www.asset-sales.com

105416_Ideal.indd 7 9/13/16 4:03 PM

Turn

ing Y

our Assets into Dollars Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C

Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315

Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – North Carolina License #6625 * 6003

SCHIESS 63/78 VERTICAL BORING MILL

DIRECTIONSFrom Charlotte Douglas Airport:

Exit Airport to Billy Graham Parkway. Turn left onto NC-49N / S. Tryon St. for 4 miles. Turn left onto Foster Ave. Turn right onto Bank St. Destination will be on the right. Follow auction signs.

HOTELSHAMPTON INN & SUITES 2731 Little Rock Rd. - Charlotte, NC 28214 (704) 394-6455

HOLIDAY INN CHARLOTTE AIRPORT 2707 Little Rock Rd. - Charlotte, NC 28214 (704) 394-4301

PUBLIC AUCTIONPLANT CLOSED

IDEAL TOOL & DIE COMPANYBORING MILLS, MILLING MACHINES, CNC

MACHINERY & MANUAL LATHESCHARLOTTE, NC

TUESDAY, OCTOBER 11TH @ 10:00 A.M. EDT

ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.

Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.

All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.

All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable

to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes.

Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.

ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.

REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by As-set Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.

ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

PresortedFirst Class Mail

U.S. PostagePAID

Kokomo, INPermit No. 154

THURSDAY, OCTOBER 6th - Plano Machine & InstrumentLate Model CNC & Manual MachineryOnsite / OnlineGainesville, TX

UPCOMING AUCTIONSTUESDAY, SEPTEMBER 27th - McCoy Global USA, Inc.Late Model Mazak, Haas CNC & Manual MachinesOnsite / OnlineBroussard, LA

78"SWING

105416_Ideal.indd 8 9/13/16 4:03 PM