publicationsindexsmart.mirasmart.com/arema_cp_2019/content/images/... · 2019-09-11 ·...

PUBLICATIONS

American Railway Engineering and Maintenance-of-Way Association • 4501 Forbes Blvd., Suite 130 • Lanham, Maryland 20706 • T: +1.301.459.3200

MANUAL FOR RAILWAY ENGINEERING The Manual for Railway Engineering (MRE) is an annual publication released every April. The Manual consists of more than 5,000 pages of railway engineering reference material, the recommended practices for the industry. It contains principles, data, specifications, plans and economics pertaining to the engineering, design and construction of the fixed plant of railways (except signals and communications), and allied services and facilities. The material is developed by AREMA technical committees and is published as a guide to railways in establishing their individual policies and practices relative to the subjects, activities and facilities covered in the Manual, with the aim of assisting them to engineer and construct a railway plant which will have inherent qualities of safe and economical operation as well as low maintenance cost. Chapters are grouped into four general categories, each in a separate volume: Track, Structures, Infrastructure and Passenger, and Systems Management. The Manual is available in print or thumb drive format. Individual Chapters are available in downloadable, PDF format.

COMMUNICATIONS & SIGNALS MANUAL The Communications & Signals Manual is an annual publication released every January. It is a manual of recommended practice written by AREMA technical committees in the interest of establishing uniformity, promoting safety or efficiency and economy. This Manual offers recommendations representing current signal practices for new installations and for replacement on existing installations when general renewal or replacement is to be made. The Manual is available in print or thumb drive format. Individual Sections are available in downloadable, PDF format.

PORTFOLIO OF TRACKWORK PLANS The Portfolio of Trackwork Plans consists of plans and specifications that relate to the design, details, materials and workmanship for switches, frogs, turnouts & crossovers, crossings, rails and other special trackwork. This is a companion volume to the Manual for Railway Engineering. The Portfolio is available in print and thumb drive.

PRACTICAL GUIDE TO RAILWAY ENGINEERING Written by a group of over 50 railroad professionals, representing over 1200 years of experience, the Practical Guide to Railway Engineering may be the most useful tool since the spike maul. Whether you’re new to the industry or a long-time contributor who simply wishes to learn more, this book offers in-depth coverage of railway fundamentals and serves as an excellent reference. This text combines and consolidates the most useful information from a multitude of sources including: AREMA Manuals; Railway Engineering by W.W. Hay; Railway Curves and Earthwork by C. Frank Allen; and FRA, USDOT and other agency sources.

BRIDGE INSPECTION HANDBOOKThe AREMA Bridge Inspection Handbook© provides a comprehensive source of information, criteria and is also a guide to establish best practices and policies relative to the assessment of railway bridge inspections. It covers such topics as confined spaces, site conditions, loads and forces, nomenclature, bridge decks, timber, concrete and steel bridges, movable bridges, tunnel and culvert inspections, and emergency and post-earthquake inspections. The 2nd Edition offers upgraded photographs, diagrams and sketches. Dual units and expanded content have been added throughout the book. New additions include: Chapter 15 - Underwater Inspection of Bridges and Chapter 16 - Evaluation of Bridges for Erosion and Scour at Bridges. The Handbook is available in a print and USB combination set.

GUIDELINES TO BEST PRACTICES FOR HEAVY HAUL RAILWAY OPERATIONS: WHEEL AND RAIL INTERFACE ISSUES; BOOK 1 BY THE INTERNATIONAL HEAVY HAUL ASSOCIATION (IHHA) – MAY 2001The Wheel/Rail Interface Issues focuses on the critical area of the wheel/rail contact that is so important to successful railway operations. At the interface there must be low friction to permit moving heavy loads with little resistance; however, there must be enough friction to provide tractive effort, braking effort and steering of the wheel. Neither the wear rate nor the failure rate must be so great that the cost-effective heavy haul operations are threatened. This book contains discussions on the Vehicle/Track Interactions, Wheel/Rail Interfaces, Cost Benefit analysis, Optimizing Heavy Haul Maintenance Practices and Case Studies of Successful Heavy Haul Railways. All Best Practice books include a CD-ROM.

GUIDELINES TO BEST PRACTICES FOR HEAVY HAUL RAILWAY OPERATIONS: INFRASTRUCTURES CONSTRUCTION AND MAINTENANCE ISSUES; BOOK 2 BY THE INTERNATIONAL HEAVY HAUL ASSOCIATION (IHHA) – JUNE 2009Track for Heavy Haul focuses on the issues involving the rail, track, ballast and sub-ballast for cost effective operation of heavy haul systems. The sections in this book were developed with the expertise of over 45 authors who are recognized as leading authorities in their respective fields. This book is the most complete review of all aspects of heavy haul track systems, maintenance, inspections, economics, and components assembled to date. All Best Practice books include a CD-ROM.

GUIDELINES TO BEST PRACTICES FOR HEAVY HAUL RAILWAY OPERATIONS: MANAGEMENT OF THE WHEEL AND RAIL INTERFACE; BOOK 3 BY THE INTERNATIONAL HEAVY HAUL ASSOCIATION (IHHA) – JUNE 2015This book contains discussion of wheel/rail interaction, descriptions of how to balance wear and fatigue of wheels and rails, derailment prevention practices, vehicle/track condition monitoring, and benefits of rail grinding and friction modification. All Best Practice books include a CD-ROM.

DESIGN OF MODERN STEEL RAILWAY BRIDGES BY JOHN F. UNSWORTHThis book examines the engineering properties of structural steel typically used in modern steel railway bridge design and fabrication. It presents criteria for the maximum effects from moving loads and their use in developing design live railway loads. It complements and explains the recommended practices of AREMA’s Manual for Railway Engineering (MRE) design specifications. The new edition has been updated throughout to reflect changes in the field. It encompasses current design methods used for steel railway bridges in both SI and Imperial (US Customary) units. A practical reference and learning tool, it provides a fundamental understanding of AREMA recommended practice that enables more effective design.

American Railway Engineering and Maintenance-of-Way Association • 4501 Forbes Blvd., Suite 130 • Lanham, Maryland 20706 • T: +1.301.459.3200

PUBLICATIONS (continued)

Complete order form on following pages

12019 Publications Order Form of 5

Prices effective September 9, 2019. (Prices subject to change.)

Publication TitleMember

PriceNon-Member

Price Quantity Total Cost

VOLUME 1 – TRACK

Ch. 1 – Roadway and Ballast $220 $290

Ch. 4 – Rail $220 $290

Ch. 5 – Track $220 $290

Ch. 30 – Ties $220 $290

VOLUME 2 – STRUCTURES

Ch. 7 – Timber Structures $220 $290Ch. 8 – Concrete Structures and Foundations $220 $290

Ch. 9 – Seismic Design for Railway Structures $220 $290

Ch. 10 – Structures, Maintenance and Construction

$220 $290

Ch. 15 – Steel Structures $220 $290

VOLUME 3 – INFRASTRUCTURE AND PASSENGER

Ch. 6 – Buildings and Support Facilities $220 $290

Ch. 11 – Commuter and Intercity Rail Systems $220 $290


PriceNon-Member

Price Quantity Total Cost

Ch. 12 – Rail Transit $220 $290

Ch. 14 – Yards and Terminals $220 $290

Ch. 17 – High Speed Rail Systems $220 $290

Ch. 18 – Light Density and Short Line Railways $220 $290

Ch. 27 – Maintenance of Way Work Equipment $220 $290

Ch. 33 – Electrical Energy Utilization $220 $290

VOLUME 4 – SYSTEMS MANAGEMENT

Ch. 2 – Track Measuring Systems $220 $290

Ch. 13 – Environmental $220 $290

Ch. 16 – Economics of Railway Engineering and Operations

$220 $290

Ch. 28 – Clearances $220 $290

Publications Order Form


PriceNon-Member

PriceS & H Fee Schedule Quantity Total Cost

2019 Manual for Railway Engineering (MRE) – Annual Publication released every April

Complete Print Set $960 $1,470 1

Thumb Drive (Single User) [Contact us for multi-user license fees] $920 $1,430 2

Combination Set – Print and Thumb Drive $1,655 $2,465 1

Extra Thumb Drive (Valid only with original purchase of Thumb Drive or Combination Set) $575 $880 2

2019 Print Revisions $420 $600 2



SUPER COMBO (MRE and Portfolio of Trackwork Plans)Add a Track Portfolio as a companion to your Manual for Railway Engineering at a special discounted combination price.

MRE and Portfolio of Trackwork Plans - Thumb Drive Set $1,580 $2,330 2

MRE and Portfolio of Trackwork Plans - Print Set $1,830 $2,660 1

MRE and Portfolio of Trackwork Plans - Combination Set (Print & Thumb Drive) $3,055 $4,370 1

2018 Portfolio of Trackwork Plans Plans and specifications of switches, frogs, turnouts & crossovers, crossings, rails, special track work. A companion to the AREMA Manual for Railway Engineering.

Complete Print Set $1,090 $1,490 2

Combination Set - Print and Thumb Drive $1,745 $2,380 2

Thumb Drive (single user) [Contact us for multi-user license fees] $825 $1,125 2



2019 Manual for Railway Engineering (MRE) – Individual/Downloadable Chapters in PDF format. Visit www.arema.org


PriceNon-Member





PriceNon-Member


2019 Communications & Signals Manual of Recommended Practices (Annual Publication released every January)

Complete Print Set $920 $1,430 1

Thumb Drive (Single User) [Contact us for multi-user license fees] $860 $1,370 2

Combination Set (Print and Thumb Drive) $1,550 $2,365 1

Extra Thumb Drive (Valid only with original purchase of Thumb Drive or Combination Set) $575 $880 2





PriceNon-Mem-ber Price Quantity Total Cost

VOLUME 1

Sec. 1 – Administrative and General $220 $290

Sec. 2 – Railroad Signal Systems $220 $290

Sec. 3 – Highway-Rail Grade Crossing Warning Systems $220 $290

VOLUME 2

Sec. 4 – Yard Systems $220 $290

Sec. 5 – Defect Detection Systems $220 $290

Sec. 6 – Relays $220 $290

Sec. 7 – Signals $220 $290

Sec. 8 – Track Circuits $220 $290

VOLUME 3

Sec. 9 – Power Supply $220 $290

Sec. 10 – Wire and Cable $220 $290

Sec. 11 – Circuit Protection $220 $290


PriceNon-Mem-ber Price Quantity Total Cost

Sec. 12 – Switches $220 $290

Sec. 13 – Mechanical $220 $290

VOLUME 4Sec. 14 – Electrical Devices, Foundations, Hardware Materials

$220 $290

Sec. 15 – Materials $220 $290

Sec. 16 – Vital Circuit and Software Design $220 $290

Sec. 17 – Quality Principles $220 $290

VOLUME 5

Sec. 19 – Electrical Protection $220 $290

Sec. 20 – Inductive Interference $220 $290

Sec. 21 – Data Transmission $220 $290

Sec. 22 – Radio $220 $290

Sec. 24 – Positive Train Control $220 $290

Practical Guide to Railway Engineering CD-ROM Only $125 $200 2

Combination Book/CD-ROM $175 $225 2

Bridge Inspection Handbook Combination Book/USB $175 $225 2

International Heavy Haul Association Publications Best Practice Book (Wheel & Rail Interface) Book 1

Focuses on the critical area of the wheel/rail contact that is so important to successful railway operations. Contains discussions on the Vehicle/Track Interactions, Wheel/Rail Interfaces, Cost benefit analysis, and more.

$100 $100 2

Best Practice Book (Infrastructures Construction & Maintenance) Book 2

Focuses on the issues involving rail, track, ballast and sub-ballast for cost effective operation of heavy haul systems. Broad subjects include: Track as a Key Enabler for Heavy Haul Svc. (In-teraction with vehicles, track geometry, etc.; Track Components, Upgrading of Track for Heavy Haul Svc. and much more.

$125 $125 2

2019 Communications & Signals Manual Individual Section Sales/Downloadable Sections in PDF format. Visit www.arema.org


PriceNon-Member





PriceNon-Member


Best Practice Book (Management of Wheel & Rail Interface) Book 3

Contains discussion of wheel/rail interaction, descriptions of how to balance wear and fatigue of wheels and rails, derailment prevention practices, vehicle/track condition monitoring, and benefits of rail grinding and friction modification.

$165 $165 2

Design and Construction of Modern Steel Railway, Second Edition Bridges by John F. Unsworth, P.Eng.Print Version $150 $205 2

Handbook for Streambed Erosion Hazard Recognition and Countermeasures for Railroad Embankments & BridgesPrint Version $125 $150 2

Proceedings (American Railway Engineering Association) Annual hardbound book containing the years’ Bulletins.

Annual Volumes Available 1987 – 1997Some Older Volumes Available – Call for Availability $125 $150 2

Proceedings (AREMA) – 1998 Communications & Signals Print Version only $150 $125 2

Proceedings (AREMA) – 1998 Track & Structures

Print Version $50 $125 2

CD Version $25 $40 2

Proceedings (AREMA) – 1999 (Combined C&S/T&S) Print Version $50 $125 2


Proceedings (AREMA) – Check the year you wish to purchase: 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 Print Version $65 $125 2


Proceedings (AREMA) – Check the year you wish to purchase: 2011 2012 2013 2014 2015 2016 2017 2018 2019 (Print Only)

Print Version $200 $300 1

Flash Drive $100 $200 2

Talbot Reports by A.N. Talbot Most comprehensive and extensive series of investigations into the behavior of railroad track structures ever undertaken. $175 $200 2

Railroad Engineering, 2nd Edition, by W.W. Hay Excellent reference for users of the AREMA Manual for Railway Engineering and Portfolio of Trackwork Plans. Evaluating train resistance, ballast resilience, deformation and sizing, undercutting, track-train dynamics, rail life, and much more. $300 $350 2

Reflections on a Half Century of Railway Engineering and Some Related Subjects by William G. Byers, PE

Print Version $15 $ 15 $ 15 2

AREA Symposium: Turnouts & Special Trackwork

Set of proceedings covering five special sessions $110 $135 2

Highway-Railroad Grade Crossing Rules & Regulations Governing testing, maintenance and inspection with FRA interpretations and classifications of defects – revised October 2004. Call for quantity pricing. $ 12 $ 15 2

Monograph – Actual Loads Applied to RR Bridges and Bridge Design 1830 – 1905 (John Wood, Calgary) Print Version $25 $40 2



SUBTOTAL $

For MARYLAND orders add 6% Sales Tax $

Please select schedule 1 or 2 based on which publication(s) you have ordered.SHIPPING AND HANDLING FEES FOR SCHEDULE 1

For shipping destinations within the Continental U.S. (excluding Alaska and Hawaii), add $55.00 for Books, Bound Manuals and/or Combination orders (Manual and Thumb Drive). For Canada, Alaska, and Hawaii, add $90.00 for Books, Bound Manuals and/or Combination orders (Manual and Thumb Drive).

Enter shipping fee $

SHIPPING AND HANDLING FEES FOR SCHEDULE 2

For shipping destinations within the Continental U.S. (excluding Alaska and Hawaii), add $20.00 for Thumb Drive or smaller weight orders only. For Canada, Alaska, and Hawaii, add $30.00 for Thumb Drive or smaller weight orders only.

Enter shipping fee $

For multiple product orders and all orders outside the U.S. and Canada, please call AREMA at 301.459.3200 ext. 711 or email Morgan at [email protected] for shipping and handling costs before ordering. All customs duties or broker fees for international shipments (including Canada) are the responsibility of the purchaser.

GRAND TOTAL $

Please note that AREMA Member pricing applies to current AREMA members in good standing. Membership in AREMA is on an individual, not corporate, basis.

ALL SALES ARE FINAL – NO REFUNDS OR EXCHANGES

PAYMENT METHOD

Check or Money Order Enclosed – Payable to AREMA in U.S. Funds and drawn on a U.S. Bank. A $35 service fee will be charged for a returned check.

Master Card Visa American Express Discover CREDIT CARD ORDERS MAY BE FAXED or EMAILED

Card Account # ______________________________________________Expiration Date ______________________

Name on Card (print) _____________________________________________ Signature ______________________

Ship to Name (print) _________________________________________________________________________________________

Company __________________________________________________________________________________________________

Address

City ____________________________ State/Province ____________ Postal/Zip Code _______________ Country ___________

Phone ____________________________Fax ____________________________ Email _____________________________________

Submit form with payment using one of the following ways or contact AREMA with questions:MAIL AREMA

4501 Forbes Blvd., Suite 130 Lanham, MD 20706-4362 USA

WEB www.arema.org (Visa, MasterCard, AMEX or Discover only)

PHONE +1.301.459.3200EMAIL [email protected]



These Terms and Conditions apply to all orders for AREMA publications. By ordering and accepting these publications, you agree to be bound by and comply with all provisions included herein.

AREMA member pricing applies to current AREMA members in good standing. Membership in AREMA is on an individual, not corporate basis. An order at “Member” pricing must be placed by an AREMA member who meets the above criteria.

Manuals, books, Thumb Drives, CD-ROMs, drawings, etc. published by AREMA are protected by USA and international copyright laws. All rights are reserved. Photocopying or reproduction by any means, electronic or otherwise, except for limited internal use of brief excerpts under the “Fair Use” provision, is strictly prohibited. Copyright violations are serious and will be pursued. For rulings on any contemplated reproduction under “Fair Use”, please contact AREMA Headquarters with a written description of the proposed use. Your acceptance of the order is implicit certification of

your understanding of and compliance with these copyright provisions.

All sales are final. No refunds or exchanges are permitted. Please verify that you are ordering the desired item. When shipping internationally, there may additional customs and duties fees. These fees are the responsibility of the customer.

Maryland Sales Tax (6%) will be added to all orders shipped to a Maryland address or picked up at the AREMA office.

All prices are in United States Dollars (USD). Payments by check or bank institutions must be in U.S. Funds and drawn on a U.S. Bank. All conversion, bank, or administrative charges must be for the account of the buyer.

The sale of individual Manual Chapters and Sections is for the convenience of the purchaser. AREMA is not responsible for providing, or for the absence of, any cross-reference material that may not be available as the result of a purchase of an individual Manual Chapter or Section.

AREMA Manuals, Technical Papers and Other Publications are Protected by U.S. and International Copyright Law.

• To order additional copies, please contact AREMA Publications Sales, Tel: +301.459.3200, email: [email protected]

• A copyright license may be obtained, upon payment of the appropriate fee, to reproduce parts of AREMA publications for internal, personal or educational classroom use. Please contact Morgan Bruins at AREMA Headquarters with full details of the proposed use.

• Multi-user licenses are available for materials in Thumb Drive format. Please contact AREMA Headquarters for pricing.

TERMS AND CONDITIONS

COPYRIGHT NOTICE

publicationsindexsmart.mirasmart.com/arema_cp_2019/content/images/... · 2019-09-11 ·...

Documents