Face of plasterguardshould be flush with

finish wall line

2" (51 mm)

3 1/2" (89 mm)

7" (178 mm)

PTT188742 \ PTT188752

PSP-B-PTT188742 Rev. C

8" (203 mm)

Min.18"

(457 mm)Max.

COMPLIES WITH:• ASME A112.18.1 / CSA B125.1

Indicates compliance toICC/ANSI A117.1 - Valve control only

WARRANTY

• ASSE 1016

Rough-In:PTR188700-UNPTR188700-UNWSPTR188700-IPPTR188700-IPWS

Trim:PTT188742 Lever Handle Shower OnlyPTT188752 Lever Handle Tub/Shower

STANDARD SPECIFICATIONS• Pressure balanced bath mixing valve• Tub/Shower. Requires 1 1/2" wall cavity.• Back-to-back installation capability.• Forged brass body.• Field adjustable means to limit handle rotation into hot water zone.• Temperature control to rotate a maximum of 120° from full cold to the maximum temperature.• Single Handle• Temperature Only Controlled with Handle

PTT188742 PTT188752

PTR188700-UNPTR188700-UNWSPTR188700-IPPTR188700-IPWS

RP44121▲

Full Spray

RP70536

2.0 GPM Max.

4 5/32"(106 mm)

2 3/4"(70 mm)

5 11/32"(136 mm)

2 15/32"(62 mm)

WARNINGRE-INSTALLDISC AFTER

SETTINGROTATIONALLIMIT STOP

WARNINGRE-INSTALLDISC AFTER

SETTINGROTATIONALLIMIT STOP

3 3/8"(86 mm)

6"(152 mm)

2 5/8±1/2"(67±13 mm)

3 3/8"(86 mm)

2 3/8"(86 mm)

FinishedWall

Stringer

5 5/8"(143 mm)

6"(152 mm)

2 5/8±1/2"(67±13 mm)

3 3/8"(86 mm)

2 3/8"(80 mm)

Stringer

FinishedWall

A BPTR188700-UN PTR188700-UNWS

0 1

2

3

4

5

0 10 20 30 40 50 60 70 80 90 Pressure (PSI)

Flow

(U.S

. Gal

lons

Per

Min

ute)

6

0 69 138 207 276 345 414 483 552 621

0 3.8

7.6

11.4

15.1

18.9

22.7

Pressure (kPa)

Flow (Liters Per M

inute )

7 26.5

Tub Filler

30.3

34.1

8 9

Showerhead

2.0 GPM

PTR188700

• Lifetime limited warranty on parts (other than electronic parts and batteries) and inishes; or, for commercial users, for 5 years from the date of purchase.• 5 year limited warranty on electronic parts (other than batteries); or for commercial users, for 1 year from the date of purchase. No warranty is provided on batteries.