prototype cnc machining, turning & machine shop · machinery management inc. dba mri auctions...
TRANSCRIPT
PUBLIC WEBCAST AUCTION
Prototype CNC Machining, Turning & Machine Shop
AUCTION DATE & TIME
Wednesday August 9, 2017 at 11:00 AM PDT
LOCATION
FDM Engineering, Inc.
11015 Olinda Street
Sun Valley, CA 91352
INSPECTION
Wednesday, August 9, 2017 from 8:00 AM to 11:00 AM PDT
PAYMENT & REMOVAL
Full payment must be made by no later than
12:00 PM PDT Thursday, August 10, 2017.
Removal no later than Monday August 14, 2017
15% BUYERS PREMIUM will be added to all ONSITE purchases
18% BUYERS PREMIUM will be added to all ONLINE purchases
Sale Conducted By:
• Tel: 818.346.7985 • Fax: 818.346.7986 • 1650 Voyager Ave. Ste. A, Simi Valley, CA 93063 • www.MRIAuctions.com
Payment & Removal Information
ALL INVOICES MUST BE PAID IN FULL NO LATER THAN:
12:00 PM THURSDAY AUGUST 10, 2017
NO EXCEPTIONS!
Removals:
Removal Dates & Time: From Wednesday, August 9 (after the auction ends) through
Monday, August 14 2017, between 8:00 AM to 4:00 PM. No removal during the auction
sale. NO WEEKEND REMOVAL
Removal Contact: Frank Zepeda (213) 294-0172
Removal Address: 11015 Olinda Street Sun Valley, CA 91352
Payment:
Cash
Cashier’s Check payable to MRI Auctions
Company Check payable to MRI Auctions & accompanied by a Bank Letter of
Guarantee according to format provided
Wire Transfer (instructions will be provided)
Sales Tax:
State, county and local tax of 9.25% applies to all purchases
If you are a reseller in California, a copy of your SELLER’S PERMIT and a California
RESALE CERTIFICATE MUST be provided to waive sales tax.
If you are out of state you MUST SUBMIT A BILL OF LADING FROM YOUR
TRUCKING COMPANY in order to remove the sales tax.
15% BUYERS PREMIUM will be added to all ONSITE purchases
18% BUYERS PREMIUM will be added to all ONLINE purchases
**THIS CATALOG IS MEANT MERELY AS A GUIDE. THE
AUCTIONEERS DO NOT WARRANT THE ACCURACY,
GENUINENESS, AUTHENTICITY, DESCRIPTION, WEIGHT
OR COUNT OF MEASURE OF ANY OF THE
LOTS SPECIFIED HEREIN**
PROPER FORMAT OF A BANK LETTER OF GUARANTEE USED FOR
BUSINESS CHECKS
(Must be on Bank Letterhead)
Date: Today’s Date
Machinery Management Inc. DBA MRI Auctions
1650 Voyager Ave, Ste. A
Simi Valley, CA 93063
Re: FDM Engineering Auction
To Whom it May Concern,
Your Company Name holds a checking account with our bank, account number
your account number. Your bank name will GUARANTEE check number check
number used made payable to MRI Auctions, for any amount up to bank to specify
amount.
Signed,
Bank Officer Signature
Bank Officer Name
Bank Officer Telephone
TERMS & CONDITIONS OF SALE
1. Buyer is required to maintain a 25% deposit on all items purchased at the auction. This is a nonrefundable deposit and will be forfeited in the event that a Buyer fails to close. Payments are accepted in the form of CASH, CASHIER'S CHECK made payable to Machinery Resources International, WIRE TRANSFER, or BUSINESS CHECK accompanied by an APPROVED BANK LETTER OF GUARANTEE payable to Machinery Resources International ONLY. NO EXCEPTIONS. All bidding and invoicing will be in US Dollars ($); the above approved forms of payment must be made in US currency. ALL INVOICES MUST BE PAID WITHIN 24 HOURS OR THE DEPOSIT WILL BE FORFEITED TO AUCTIONEER. 2. NO DEPOSIT IS REQUIRED TO REGISTER AND TO PARTICIPATE IN THE AUCTION. 3. A premium of 15% ONSITE and 18% ONLINE of the bid price will be added to the price of each item purchased. The buyer's premium for each sale will be announced at the time of the auction. Taxes are calculated AFTER the buyer's premium. Note: Buyer's premium online generally differs from onsite. The Buyer's Premium percentage will be posted on the website or announced by the auctioneer. 4. ALL SALES ARE FINAL. NO EXCEPTIONS. The condition of the merchandise being offered varies. Buyer understands and agrees:(a) that any description or sample of the merchandise given or furnished by Auctioneer is solely for identification, and does not create any warranty, express or implied, that the merchandise actually conforms to such description or sample; (b) that all merchandise is purchased and accepted by Buyer "AS IS-WHERE IS," 'IN PLACE" and "WITH ALL FAULTS, KNOWN AND UNKNOWN.'' AUCTIONEER MAKES NO WARRANTIES OR GUARANTEES WHATSOEVER WHETHER WRITTEN, ORAL OR IMPLIED AS TO QUALITY, QUANTITY, CONDITION, LOCATION, USEABILITY, SALEABILITY, WEIGHT, MEASUREMENT, YEAR, MODEL, MECHANICAL CONDITION, PERFORMANCE, FITNESS FOR A PARTICULAR PURPOSE OR OTHER SPECIFICATIONS. MANUFACTURERS WARRANTIES MAY BE IN EFFECT. NO SALE SHALL BE INVALIDATED AND AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT OR OTHERWISE. Descriptions have been prepared for guide purposes only and shall not be relied upon by Buyer for accuracy or completeness. By submitting a bid, Buyer/Bidder affirms it has inspected all items or has waived its right to do so prior to bidding Buyers shall be deemed to have relied entirely upon their own inspections and investigations. 5. Buyers will be charged all applicable taxes unless SATISFACTORY PROOF OF EXEMPTION is provided to Auctioneer prior to payment. lf satisfactory proof is not provided, Buyer will pay all applicable taxes to Auctioneer. No taxes will be refunded once the tax has been collected. Proof of exemption, subject to approval by Auctioneer, includes VALID RESELLER'S PERMITS, STATE ISSUED LETTERS OF EXEMPTION, BILLS OF LADING provided by shipper for OUT-OF-STATE SHIPMENTS only, and any other documents as governed by applicable local, state, and federal laws deemed acceptable at Auctioneer's sole discretion. Taxes are calculated AFTER the buyer's premium. 6. All articles will be sold to the highest bidder conforming to the bid process. Auctioneer reserves the right to sell articles by individual group lots and "En Bloc" as he deems appropriate. Auctioneer reserves the right to group, reduce, add to or delete lots. Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. in the event there is a dispute between two or more claims of entitlement as the successful bidder, Auctioneer reserves the right to re-auction the item in dispute. Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. Auctioneer shall be entitled to make changes in (the composition of) the lots or to withdraw them, up until the last moment before the sale, refuse bids without having to state the reasons, in which case the previous bidders shall be bound to their bids, and to correct himself. Auctioneer reserves the right to sell subject to reserve and to purchase for its own account or of others, whether by verbal or written proxy, all subject to prior sale. All sales shall be concluded on the fall of the hammer or as indicated by Auctioneer and no Buyer may thereafter revoke his bid. 7. Any announcements made on the day of the auction take precedence over catalogue or other previously announced or documented information, but do not alter in any way the basic terms and conditions of sale. Machinery Resources International reserves the right to correct any mistakes or typographical errors made by itself or on its behalf in any of its announcements or documents. 8. No checkout will be permitted during the auction sale. All invoices must be paid in full before merchandise will be released from the premises. Unless Auctioneer determines otherwise at its sole discretion, checkout will begin on the day following the auction sale. Quantities must be checked before removal of purchases. No allowances will be made for claims or shortages once items are removed from the Auction premises. Unless Auctioneer determines otherwise at its sole discretion, no item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale. Where available, documents of transfer, including motor vehicle ownership documents, will be provided within 7 days following the auction or as soon thereafter as such documents are available. Machinery Resources International makes no warranties that such documents will be available. Any available titles shall not pass to Buyer until full payment is received. 9. All property must be paid for and picked up in the time frames announced by Auctioneer at time of sale. lf not, the merchandise will be deemed abandoned and Buyer will lose any right, title or interest Buyer may have acquired and the merchandise shall revert and repossess to Auctioneer without further notice to Buyer and Buyer's deposit will be forfeited. No purchaser may assign, transfer, or dispose of his rights in any article purchased before he has paid the purchase price in full. No reselling will be allowed from the premises.
10. lf an applicable conditions are not complied with by Buyer, then, in addition to any other remedies available to Auctioneer, including and without limitation, the right to hold Buyer liable for the total purchase price, Auctioneer may, at its option, (a) cancel the sale, retaining all payments made by Buyer, including any deposit made, as liquidated damages and/or (b) resell the merchandise at public auction in which event Buyer will be liable for the cost of removing and reselling the abandoned merchandise, for any deficiency between Buyer's original purchase price and subsequent resale price, Auctioneer's commission, interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum of $2.00/sq.ft. per month) and all other expenses related to the disposal or reselling of the abandoned property. In addition, Auctioneer may retain any merchandise purchased at auction by a defaulting Buyer as collateral security for Buyer's obligations to Auctioneer. 11. Buyer is solely responsible to provide any personnel, equipment or material needed to pick up purchases and shall assume all responsibility for the removal of any item of property purchased at the sale and any and all risks associated with such removal including, without limitations, the responsibility for providing LICENSED AND BONDED professionals to ensure proper water, gas and/or power disconnection, disassembly, removal and loading, and full financial responsibility for any damage or liability to persons or property resulting from any negligent act or omission of Buyer or Buyer's employees, agents and/or representatives during pick-up and removal. 12. Buyer agrees that in the event purchased merchandise contains any environmental hazards, toxic waste or other type of hazardous material in any form whatsoever, Buyer shall provide evidence that Buyer or its representatives are licensed for such removal and shall comply with all applicable local, state and/or federal rules, laws and regulations. Auctioneer, its agents or representatives will not be responsible for its containment, storage or removal. 13. Persons in attendance during inspection, sale or removal of merchandise assume all risks of damage or loss to persons, property, or merchandise and shall exercise proper precautions at all times for the protection of persons and property and shall comply with all safety and health requirements as directed by Auctioneer, and local, state and federal regulations. Auctioneer, its agents, its employees and representatives shall not be liable by reason of any defect in or about the condition of the premises on which the auction is held. Buyer specifically releases Auctioneer, its agents and representatives from all liability thereof. 14. All risk loss shall pass to Buyer at the time of payment. lf Auctioneer is unable to deliver an article sold to Buyer due to fire, theft, or any other reasons whatsoever, Auctioneer shall reimburse Buyer for all monies paid to Auctioneer in respect to the article and Auctioneer shall have no further liability to the purchaser arising from or relating to such loss, including without limitation any damages for loss of profits. 15. In no event shall Auctioneer's liability to Buyer exceed the purchase price actually paid, A Buyer's claim shall be limited to the amount paid for the merchandise, and shall not extend to any obligation; risk; liability; right; claim; remedy for loss of use, revenue or profit; liability of Buyer to any third party; personal injury; or any other direct, indirect, incidental or consequential damages. Auctioneer is acting as an agent only and is not responsible for the acts of its principles. 16. Buyer agrees to indemnify, defend and hold harmless Auctioneer and its agents and representatives, from any and all demands, claims, losses, damages and liabilities (including attorneys' fees) asserted against, resulting to or imposed upon Auctioneer resulting from the negligence of Buyer or his/her employees, agents and representatives, while in, at or about the auction premises during inspection, sale or removal of merchandise. 17. Machinery Resources International shall have the right to make image and audio video recordings of the auction, to use said recordings at its own discretion, and if deemed appropriate to make this public. Participants give their permission by participating in the auction. 18. The bidder's paddle is nontransferable. All bids made by the holder of the paddle will be Buyer's responsibility. A successful bid at auction constitutes a legally binding contract of sale. Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending the auction and may revoke such privilege of bidding or attending the auction AT ANY TIME. 19. This sales transaction shall be governed by and construed in accordance with the local laws of the State of California, USA. lf any provision of these Terms and Conditions shall be held invalid, illegal, unenforceable or inoperative, the balance of Terms and Conditions shall remain in full force and affect as if such provisions had not been included. These Terms and Conditions with any amendments or modifications expressly made by Auctioneer at the time of the auction constitute all the terms and conditions with respect to the sale of articles at this auction. There are no representations, warranties, terms, conditions, undertakings or collateral agreements except as herein provided. 20. All Buyers acknowledge and accept by their bid at auction the Terms and Conditions of Sale printed on this registration card/bidder paddle.
ALL SALES ARE FINAL! NO REFUNDS OR EXCHANGES!
AUCTION CATALOG August 9, 2017
LOT# QTY DESCRIPTION
1 1 CUTTING TORCH
2 1 ENCO HORIZONTIAL BAND SAW, MODEL 136-2616, S/N 901625
3 1 CNC BAR FEED
4 1 PART WASHER
5 1 BALDOR BUFFER/GRINDER CAT 662R, S/N W381
6 1 PATTON INDUSTRIAL FAN
7 1 27" INDUSTRIAL FAN
8 1 PORTABLE STORAGE TOOL BOX
9 1 KENNEDY TOOL BOX
10 1 AMERICAN EAGLE AIR COMPRESSOR, MODEL B-23, S/N 239701, 5 HP MOTOR
11 1 5 DRAWER TOOL STORAGE METAL CABINET
11A 1 CINCINNATI HORIZONTIAL #2 PRODUCTION MILL
12 1 CUTTERMASTER END MILL & TOOL GRINDER, MODEL HDT-30, 110 VOLT, PHASE I, 3450
RPM, S/N 2492-B
13 1 2-DOOR METAL CABINET
14 1 EMERSON BELT SANDER CONBINATION
15 1 DELTA VERTICAL BAND SAW, CAT # 28-303, S/N 94152644
16 1 CARBIDE GRINDER
17 1 METAL DESK
18 1 BALDOR DOUBLE END CARBIDE GRINDER, CAT # 500, HP 1/2, PHASE I, 3,600 RPM
19 1 AIR FAN
20 1 STORAGE MATERIAL HEAVY DUTY RACK, NO CONTENT
21 1 STORAGE MATERIAL HEAVY DUTY RACK, NO CONTENT
22 1 USABLE STEEL MATERIAL ON 2 RACK TO INCLUDE STEEL ROUNF/FLAT ALUMINUM
ROUND/FLAT ALUMINUM PLATES
23 1 (3) METAL STEEL SHELVING, NO CONTENTS
24 1 YUASA 5C COLLET INDEX, S/N 550
25 1 RICH MILL 5C COLLET INDEX
26 1 8" 3 JAW LATHE CHUCK
27 1 6" KURT VISE MODEL 3600V, S/N 038040
28 1 6" KURT VISE
29 1 6" KURT VISE
30 1 7" 3 JAW BUCK CHUCK
31 1 BTC 5" 3 JAW CHUCK
32 1 KDK TOOL POST & HOLDER
33 1 ALBRECHT 0-1/4 KEYLESS PRECISION DRILL CHUCK
34 1 CAT 40 HOLDER WITH 0-1/4" ALBRECHT KEYLESS DRILL CHUCK
35 1 CAT 40 CNC HOLDER WITH 0-3/8" ALBRECHT KEYLESS DRILL CHUCK
36 1 CAT 40 CNC HOLDER WITH 1/32" - 1/2" ALBRECHT KEYLESS DRILL CHUCK
37 1 CAT 40 CNC HOLDER WITH 1/32"-1/2" ALBRECHT KEYLESS DRILL CHUCK
38 1 CAT 40 CNC HOLDER WITH 0-1/4" ALBRECHT KEYLESS DRILL CHUCK
39 1 CAT 40 CNC HOLDER WITH 0-3/8" ALBRECHT KEYLESS DRILL CHUCK
40 1 CAT 40 CNC HOLDER WITH KYUSHKO6H S-50 SUPER PRECISION BORING HEAD
41 1 CRITIRION BORING HEAD 5/8 SHANK DBL-202
42 1 (2) CRITIRION BORING HEAD 5/8 SHANK DBL-202
43 1 CAT 40 CNC HOLDER WITH CRITIRION BORING HEAD MOD-3
Page 1 of 7
AUCTION CATALOG August 9, 2017
LOT# QTY DESCRIPTION
44 1 CAT 40 CNC HOLDER WITH CRITIRION BORING HEAD
45 1 CAT 40 CNC HOLDER WITH CRITIRION BORING HEAD DBL-202
46 1 (5) ASSORTED CAT 40 CNC HOLDER
47 1 (5) ASSORTED CAT 40 CNC HOLDER
48 1 (5) ASSORTED CAT 40 CNC HOLDER
49 1 (4) ASSORTED CAT 40 CNC HOLDER
50 1 (5) ASSORTED CAT 40 CNC HOLDER
51 1 (4) ASSORTED CAT 40 CNC HOLDER
51A 1 USABLE BRASS MATERIAL ON TOP OF RACK
52 1 (4) CAT 40 CNC HOLDER
53 1 (3) CAT 40 COLLET TYPE CNC HOLDER ASSORTED
54 1 (3) CAT 40 COLLET TYPE CNC HOLDER ASSORTED
55 1 (4) ASSORTED CAT 40 CNC HOLDER
56 1 (3) CAT 40 WITH TAPPIN COLLET HOLDER ATTACHMENT
57 1 (6) CAT 40 COLLET TYPE CNC HOLDER ASSORTED
58 1 8" 4 JAW LATHE CHUCK
59 1 5C COLLET HOLDER FIXTURE
60 1 4" MILL/DRILL VISE
61 1 2" SUPER PRECISION TOOL MAKER VISE
62 1 3" JAW LATHE CHUCK MOUNTER ON ALUMINUM PLATE
63 1 BTC 5" 3 JAW BUCK CHUCK
64 1 (2) ALUMINUM MILL STOP
65 1 5C COLLET CLOSER
66 1 FIX CUTTER TOOLS
67 1 CAT 40 CNC HOLDER WITH PRECISION BORING HEAD
68 1 ASSORTED SPRING COLLET
69 1 EXTENTION COLLET ADAPTER
70 1 (16) 5C COLLET
71 1 ASSORTED TOOLING HOLDER FOR HARDINGE LATHE
72 1 TOOLS ON WALL
73 1 ASSORTED LATHE STEEL JAW
74 1 OPTI VISER LAMP
75 1 ALUMINUM MATERIAL ON RACK
76 1 SHIPPING SUPPLIES WITH (2) METAL SHELVES
77 1 ALUMINUM SOFT JAW
78 1 RACK WITH COMPUTER, MONITOR, AND PRINTER
78A 1 COMPUTER AND MONITORS
79 1 BROWN AND SHARPE 2L 6" X 18" SURFACE GRINDER, AUTOMATIC
80 1 DENISON MULTIPRESS PRESS MODEL R063M020, 6 TON CAPACITY, RAM DIAMETER 2",
THROAT 3", VOLT 220, PHASE 3, S/N 16304
81 1 TREE VERTICAL MILL, MITUTOYODRO, 60-3300 RPM, 2 HP MOTOR, 220 VOLT, S/N 780026C-
14
82 1 HARDING HC CHUCKER LATHE, MODEL HC, 5 STATION TURRET, POWER FEED, 1.5 HP, 230
VOLT, 3 PHASE, S/N A934413
82A 1 5C COLLET SET
Page 2 of 7
AUCTION CATALOG August 9, 2017
LOT# QTY DESCRIPTION
83 1 HARDINGE PRECISION 2ND OPERATION LATHE, MODEL DSM59/DSM 59, 5C COLLET SET,
230 VOLT, 3 PHASE, S/N B1226061
83A 1 (30) ASSORTED 5C COLLET ROUND & HEXAGONAL
84 1 CLAUSING COLCHESTER 15" X 48" ENGINE LATHE, MITUTOYO DRO, INCH/METRIC
STEADY REST, FOLLOW REST, 3 JAW CHUCK, 4 JAW CHUCK, 25-2000 RPM, 7.5 HP MOTOR,
230 VOLT, PHASE 3, POWER FEED, BRAKE STOP, S/N 6/0015/13305
85 1 METAL WORK BENCH
85A 1 SHOP MAKE BORING BAR
86 1 BRIDGEPORT VERTICAL MILL, SERIES II, 2HP, NEWALL SAPPHIRE DRO INCH/METRIC,
AUTOMATIC POWER DRAW BAR, POWER FEED, CHROME WAYS, MITUTOYO DIGITIAL
STOP DEPTH GAGE, R 8 COLLET SET, ONE SHOT LUBE, TABLE SIZE 9 X 42, S/N 264843
87 1 6" KURT VISE
88 1 2-DRAWER STORAGE METAL CABINET
89 1 HITACHI SEIKI CNC VERTICAL MACINING CENTER MODEL VM 40-II, SEICOS CONTROL,
CRT RAPID OVERRIDE, SPINDLE OVERRIDE, 8000 RPM, 220 VOLTS, 3 PHASE, 18KVA, TABLE
SIZE 16" X 40", 20 ATC
90 1 HITACHI SEIKI CNC VERTICAL MACHINING CENTER, VA 5-SERIES, MODEL VA35 III,
SYSTEM 11M CONTROL, CRT, 220 VOLTS, 3 PHASE, 25 KVA CAPACITY, FEED OVERRIDE,
RATE OVERRIDE, S/N LS70-8
91 1 HAAS 5C ROTARY TABLE INDEXER, TAILSTOCK, BRUSHLESS, DIGITAL CONTROL, S/N
802792
92 1 LOT OF CARBIDE BORING BAR AND DRILL BUSHING
93 1 LOT OF COBOLT ROUGHER END MILL
94 1 LOT OF SPECIAL CNC CLAMPS
95 1 CAT 40 HOLDER SET UP TOOL
96 1 WORK BENCH
97 1 COMPUTER WITH SAMSUNG MONITOR AND KEYBOARD
98 1 CAT 40 METAL PORTABLE TOOL HOLDER RACK
99 1 VOID
100 1 KEARNEY AND TRECKER DIVIDING HEAD WITH TAILSTOCK 8" CHUCK
101 1 KEARNEY AND TRECKER UNIVERSAL MILL, MODEL K, POWER FEED 45-717 RPM, TABLE
SIZE 18" X 52"
102 1 KEARNEY AND TRECKER 16" DIAMETER, MANUAL ROTARY TABLE
103 1 KEARNEY AND TRECKER HEAVY DUTY 8' X 19" MILLING VISE
104 1 KEARNEY AND TRECKER HEAVY DUTY 8' X 19" MILLING VISE
105 1 ASSORTED TOOLING FOR KEARNEY AND TRECKER VERTICAL MILL
106 1 WASINO L-70 CNC GANG TYPE LATHE, FANUC 3T CONTROL, CRT, 2 AXIS, 3,000 RPM, 12.63”
TURNING DIAMETER, ZX TRAVELS: 10” X 18”, 5 HP, 220 VOLTS, COOLANT PUMP, 3 PHASE,
S/N 478
106A 1 TOOLING FOR WASINO L-70 CNC LATHE
106B 1 HOWA 5" CNC 3 JAW CHUCK FOR WASINO CNC LATHE
107 1 HITACHI SEIKI HITEC TURN CNC LATHE, MODEL HT-20, FANUC 11M CONTROL, CRT, 5” X
13” TRAVELS, 17" SWING, 8" PRECISION HYDRAULIC CHUCK, TAILSTOCK, 220 VOLTS, 3
PHASE, POWER CAPACITY 24 KVA, S/N 20831-SC
Page 3 of 7
AUCTION CATALOG August 9, 2017
LOT# QTY DESCRIPTION
107A 1 3 JAW CHUCK CNC LATHE CHUCK FOR HITACHI SEIKI
108 1 WORK BENCH AND BUSHING TOOL HOLDER
109 1 12" X 18" GRANITE SURFACE PLATE
110 1 HUOT TAP METAL CABINET WITH CONTENTS - ASSORTED HSSTAP
111 1 HUOT TAP METAL CABINET WITH CONTENTS - ASSORTED HSSTAP
112 1 METAL WORK BENCH
113 1 HUOT METAL DRILL CABINET WITH CONTENT - NUMBER DRILL SIZES
114 1 HUOT METAL DRILL FRACTIONAL CABINET WITH CONTENT
115 1 HUOT METAL DRILL CABINET WITH CONTENT LETTER DRILL SIZE
116 1 HUOT METAL DRILL CABINET WITH CONTENT HSS REAMER
117 1 2 DOOR STORAGE TOOL CABINET
118 1 METAL WORK BENCH 30" X 48" X 3'
119 1 ASSORTED COBOLT TOOL BITS
120 1 CARBIDE INSERTS
121 1 CARBIDE INSERTS AND END MILL
122 1 FLY CUTTER TOOLS
123 1 HOLD DOWN CLAMPS
124 1 HOLD DOWN CLAMPS
125 1 HOLD DOWN CLAMPS
126 1 HAND TOOLS
127 1 HERTEL JOBBER DRILL SET
128 1 PARALIEL SET
129 1 PARALIEL SET
130 1 HARDINGE DRILL BUSHING
131 1 (3) DRILL CHUCK
132 1 PREMEL TOOL GRINDER
133 1 SPI LOCK 6" VISE
134 1 LOT OF ALLEN WRENCHES
135 1 LOT OF LATHE TOOL HOLDERS
135A 1 EMERGENCY 5C COLLET
136 1 JOBBEN DRILL SET
137 1 ASSORTED COBOLT TOOL BITS
138 1 3 JAW 4" BUCK CHUCH
139 1 METAL WORK BENCH
140 1 GRANITE SURFACE PLATE 24" X 18"
141 1 ASSORTED HAND TAPS
142 1 ASSORTED CENTRER DRILL
143 1 ASSORTED STEEL 3 JAW CHUCK
144 1 SOCKET SET TOLL
145 1 SWIVEL BENCH VISE
146 1 ASSORTED CUTTING TOOLS
147 1 20' 4 JAW CHUCK LATHE
148 1 CNC INDEXABLE INSERT BORING BAR
149 1 CNC INDEXABLE INSERT BORING BAR SHANK
150 1 ASSORTED INDEXABLE INSERT END MILL CUTTER
151 1 CNC INDEXABLE INSERT END MILL CUTTER
Page 4 of 7
AUCTION CATALOG August 9, 2017
LOT# QTY DESCRIPTION
152 1 INDEXABLE INSERT CNC TOOL HOLDER 1" SHANK
153 1 INDEXABLE INSERT CNC TOOL HOLDER 1" SHANK
154 1 INDEXABLE INSERT GROOVING CNC TOOL HOLDER
155 1 INDEXABLE INSERT ASSORTER RIGHT AND LEFT HAND TOOL HOLDER 3/4" SHANK
156 1 CNC INDEXABLE INSERT PROFILE TOOL HOLDER
157 1 CARBIDE END MILLS
158 1 LONG SIZE COBOLT END MILL
159 1 ASSORTED HSS END MILL CUTTER
160 1 LOT OF INSPECSION ANGLE BLOCK
161 1 ASSORTED HSS END MILL CUTTER
162 1 ASSORTED ROUGHER END MILL CUTTER
163 1 HSS END MILL CUTTER
164 1 COUNTER SINK TOOLS
165 1 ASSORTED SAW BLADE CUTTER
166 1 ALLIEN 20 TON HYDRAULIC JACK
167 1 CLACK AND DECKER 3/8 ELECTRICAL DRILL
168 1 ASSORTED HEARDINGE TOOL HOLDER LOT
168A 1 DESK WITH CONTENT
169 1 PLASTIC PART BIN WITH WOODROOF CUTTER, HELICOIL TOOL, HARDWARE
170 1 PLASTIC PART BIN WITH DRILL BLANK SET SCREW HARDWARE
171 1 PLASTIC PART BIN WITH BOLT SCREW DOWEL PINS, SOCKET HEAD SCREW, ETC.
171A 1 CONTENT IN CABINET
172 1 PLASTIC BIN CABINET WITH HSS METRIC/INCHES TAPS, DRILL BIT
173 1 HELICOIL TOOL SET
174 1 HELICOIL TOOL SET
175 1 LOT OF HARDINGE SOFT 5C COLLET STEP COLLET
176 1 PLASTIC BIN CABINET WITH CARBIDE INSERT, ALLEN WRENCHES, DRILLS, THREAD DIES
177 1 PLASTIC BIN CABINET WITH LARGE HSS TAPS
178 1 SHARP MICROWAVE OVER, COFFEE MAKER
179 1 WOOD DESK
180 1 TIME CLOCK MASTER
181 1 CHICAGO WATER COOLER
182 1 RANGAIRE REFRIGERATOR
182A 1 VOID
183 1 PLASTIC HARDWARE BIN, HARDWARE & ELECTRICAL SUPPLIES
184 1 MITUTOYO TOOL MAKERS MICROSCOPE WITH DIGITAL RATE READ OUT, CODE # 176-904-
1A, S/N 80805
185 1 BAUSH AND LOMB STEREO MICROSCOPE
186 1 LINKS BRAND INSPECSION BLOCK SET
187 1 INSPECSION GAUGE BLOCK SET
188 1 VERMONT PIN GAGE .251/.500
189 1 VERMONT PIN GAGE .061/.0250
190 1 VERMONT PIN GAGE .251/.500, .61/.251
191 1 LUFKIN PLANER GAGE AND LEVEL
Page 5 of 7
AUCTION CATALOG August 9, 2017
LOT# QTY DESCRIPTION
192 1 INSPECSION SINE TABLE TABLE 7" X 6"
193 1 MITUTOYO 0"-12" DIAL HEIGHT GATE
194 1 CO-AX INDICATOR
195 1 MITUTOYO MASTER HEIGHT GAGE 0"-13"
196 1 MICRO TOUCH CAT 40 UMT-200 NIKKEN
197 1 MITUTOYO DIAL BORE GAGE
198 1 EATON 0"-1" OUTSIDE MICRO,ETER AND RING MASTER GAGE
199 1 BROWN AND SHARPE BEST TEST INDICATOR .0005"
200 1 MITUTOYO VERTICAL DIAL TEST INDICATOR .0005"
201 1 24" X 36" MICRO FLAT SURFACE PLATE
202 1 INSPECTION TOOLS
203 1 LOT OF MAGNETIC BASES
204 1 LOT OF INDICATOR HOLDER ACCESSORIES
205 1 DELTRONIC PIN GAGES
206 1 HARDINGE AND STARRETT DIAL INDICATOR
207 1 DIAL INDICATOR
208 1 INDICATOR STAND
209 1 INDICATOR CALIPER O-RING/BORE GAUGE
210 1 TOOL MAKER PRECISION VISE
211 1 CARBIDE END MILL
212 1 MACHINERY HAND BOOK
213 1 MICROMETER BASE STAND
214 1 2 DRAWER METAL CABINET
215 1 ROUGHER COBOLT END MILL
216 1 SHARS 1"-12" OUTSIDE MICROMETER SET
217 1 CABINET WITH PLUG GAUGES AND RING GAUGES
218 1 METAL CABINET WITH CONTENT
219 1 10" MICRO VU OPTICAL COMPARATOR, MODEL 400, 115 VOLTS, 3 AM, S/N 11911
220 1 MITUTOYO 2"-3" DIGITAL OUTSIDE MICROMETER .00005"
221 1 MITUTOYO 1"-2" DIGITAL OUTSIDE MICROMETER .00005"
222 1 MITUTOYO 0"-1" OUTSIDE MICROMETER .0001"
223 1 MITUTOYO 0"-1" OUTSIDE MICROMETER .0001"
224 1 INTERTEST INSIDE GAGUE .0005"
225 1 INTERTEST INSIDE GAGUE .0005"
226 1 MITUTOYO 3"-4" OUTSIDE MICROMETER
227 1 MITUTOYO 4"-5" OUTSIDE MICROMETER
228 1 MITUTOYO 1"-2" THREAD MICROMETER
229 1 MITUTOYO 0"-1" THREAD MIKE
230 1 MITUTOYO DIAL TEST INDICATOR .0005"
231 1 TESA 1"-2" OUTSIDE MIKE
232 1 MITUTOYO 0"-4" DEPTH MIKE
233 1 MITUTOYO 0"-1" PIN MICROMETER
234 1 MITUYOTO O.D. DISK MIC 0"-1"
235 1 EATOLON 1"-2" OUTSIDE MIC
236 1 MITUTOYO METRIC DIAL CALIPER
237 1 MITUTOYO 1-2 BLADE MIC
Page 6 of 7
AUCTION CATALOG August 9, 2017
LOT# QTY DESCRIPTION
238 1 SCHERR TUMICO 1-2 BLADE MIC
239 1 TESA 6" DIAL CALIPER
240 1 SPI INDICATOR WITH STAND
241 1 TECLOCK - 2" DIAL INDICATOR
242 1 MITUTOYO 1"-2" BLADE MIC
243 1 ANGLE PARALIEL
244 1 MITUTOYO 2"-3" O.D. MIC
245 1 SCHERR TUMICO, 0"-6" DEPTH MIC
246 1 EATALON 6" DIAL CALIPER
247 1 MITUTOYO CLIPER
248 1 MITUTOYO DIAL TEST INDICATOR .0005"
249 1 MITUTOYO DIAL TEST INDICATOR .0005"
250 1 INTERAPID DIAL TEST INDICATOR .0005"
251 1 INTERAPID DIAL TEST INDICATOR .0005"
252 1 INTERAPID DIAL TEST INDICATOR .0005"
253 1 MITUTOYO COORDINATE MEASURING MACHINE, MODEL B605B, RENISHAW PHI PROBE
HEAD, 38" X 38" SIZE TABLE, KAESER COMPRESSOR, MAG 1 MITUTOYO X,Y,Z, AXIS READ
OUT, PANASONIC KX-P 1624 MULTI MODE PRINTER
254 1 RENISHAW PHI FORCE CMM PROBE STYLUS MODULE FOR MITUTOYO CMM COORDINATE
MACHINE
255 1 PRECISION TOOL MAKER VISE
256 1 MITUTOYO 0"-12" DIAL CALIPER
257 1 FOWLER 0"-24" DIAL CALIPER
258 1 MITUTOYO DIAL BORE GAUGE 1.4"-4"
259 1 BROTHER TYPE WRITER MACHINE
260 1 INSPECSION PRECISION 1-2-3 BLOCK
261 1 CARBIDE INSERT
262 1 CARBIDE INSERT
263 1 CARBIDE INSERT
264 1 THREADING CNC TOOL HOLDER INDEXABLE INSERT
265 1 HDT PRECISION INSPECTION 50 BLOCK
266 1 PRECISION INSPECSION V BLOCK
267 1 BTC 3 JAW LATHE CHUCK
268 1 BOOKSHELF
269 1 FILE CABINET
270 1 CANNON PC850 COPIER MACHINE
271 1 OFFICE FILE CABINET
272 1 PAX MASTER RIBBON TYPE WRITER
273 1 MACHINERY DATA HAND BOOK
Page 7 of 7