protection modules for scroll and reciprocating compressors · lodam electronics a/s kærvej 77...
TRANSCRIPT
Lodam electronics a/sKærvej 776400 SønderborgDenmark
Tel. +45 73 42 37 37Fax +45 73 42 37 30
Protection modules for scroll and reciprocating compressors SE-B1/SE-B2/SE-B3
Temperature monitoring
The SE-B1/SE-B2/SE-B3 opens the relay contact in
the control circuit and locks out immediately if the
allowable temperatures for motor or discharge gas
(optional PTC sensor) are exceeded.
Reset
Interrupt supply voltage (L/N) for at least 5
seconds.
All Bitzer reciprocating and scroll compressors of
the ESH7 and ESH9 series have as standard equip-
ment the motor protection devices SE-B1, SE-B2 or
SE-B3 (Signal Evaluation - Basic).
Protection modules for scroll and reciprocating compressorsSE-B1/SE-B2/SE-B3
Lodam electronics a/sKærvej 776400 SønderborgDenmark
Tel. +45 73 42 37 37Fax +45 73 42 37 30
4,5
±0,2
7,0 ±0,5
29,2
1
32,5
1
68,3 ±1
55,5 ±0,5
10,0
±0,5 50
,0±1
2x Mountinghole
Shown without wire
SE-B1/SE-B2/SE-B3 connection diagram
111412B2
NB1
L
M1 M2L1
L2 L3
Terminal board
oran
ge
oran
ge
Reset
1
Terminal box
C
NO
NC
Lock out
Relay
Supply
Technical specifications:
Description SE-B1 SE-B2 SE-B3Operation voltage 230 V; +10% ~ -15%, 50/60 Hz, 2VA 115 V-230 V; +10% ~ -15%, 50/60 Hz, 2VA
Permitted ambient temperature -30 °C – +70 °C -30 °C – +60 °C
PTC sensor cable length 120 mm 350 mm
PTC sensor cable terminals Flag terminal 250T (6,35*0,8)
Relative humidity 5 %RH - 95 %RH, non-condensing
Relay Switch voltage 250 V ~ Continuous current max 2.5A Switching capacity 300 VA, C300.
PTC measuring circuit Sensor type:Thermistors according to DIN 44081/82,Thermistor type:1..9 in series R total < 1,8 KΩSwitching point:Relay off > 4,5 KΩ +/- 5%Relay on < 2,7 KΩ +/- 5%
Fuse required 4A, fast-blow
Enclosure class Terminals IP00
Terminal torque rating 6 lb-in.” / 0.7 Nm or equivalent.
Terminal wire range Cu 60°C only. 20-14 AWG / 0.5 mm2 - 2,0 mm2
Ver.
6.0
- 13.
12. 2
012
- Con
tent
is s
ubje
ct to
cha
nge
with
out n
otic
e.