prospot 9 - insight lighting

Black Linear

PROSPOT 9PERFORMANCE PROJECTOR | COLOR CHANGING + ACTIVE WHITE

PROJECT: TYPE: CAT. #:

Black Linear4341 Fulcrum Way NE, Rio Rancho New Mexico 87144Revised May 31, 2022Specifications subject to change without notice 1/7

P.: 505.345.0888 | insightlighting.com

- - -- - - -- -PS9 DMXFX

QUAD CLUSTER LED CONFIGURATION

The quad array integrates multiple colors (i.e. red, green, blue, white) into a single location for immediate and superior color saturation. This is ideal for direct line of sight applications where the face of the fixture is visible, creating color consistency between the luminaire and the illuminated surface. LED color combinations may be customized to suit any application (i.e. royal blue, cyan, lime, white, etc.). Please contact the factory for special branding requirements.

TEMPERED GLASS

PROFILE

3.00”

6.75”

5.28”

11.48”

2.00”

9.50”

186°

OP TIONS

VISOR LENS DEFROSTERWIREGUARDSNOOT

LIGHT SOURCE

OPTICS

CCT

LED CONFIGURATIONS

HOUSING HEAVY DUTY A380 DIE-CAST ALUMINUM

EPA 0.483 FT2

CONTROL DMX 512, FIXTURE OR SYSTEM RESOLUTION

WARRANTY 5-YEAR LIMITED

-40° C TO 50° C

100,000 HOURS

ETL , cETL, IP66, IK09, OPTIONAL 3G

PERFORMANCE

VOLTAGE

POWER

CABLE COLOR WHITE OR BLACK

LENS TEMPERED GLASS

WEIGHT 15 LBS (6.8 KG)

FINISH HIGH DURABILITY POWDER COATING

OPERATING TEMP

LUMEN MAINTENANCE

CERTIFICATION

LOW (30 W), MEDIUM (50 W), HIGH (85 W)

5°, 10°, 20°, 40°, 60°, 100°, HSL

RGB30K, RGB40K, RGBA, AWH (2700K-6500K)

LFS (LIFTED FULL SPECTRUM)

DISCRETE OR QUAD CLUSTER

UP TO 167,184 PEAK CANDELA

120V OR 277V

INTEGRATED POWER SUPPLY

PROFILE

ANSI C136.3 ANSI C136.33G

ANSI C136.31IK10 IP67IP66 IK08 IK09 IK10

OP TICS Not all available optics shown

5° 10° 20° HSL

FIXTURES SHOWN:

PS9-HO-RGB30-Q-60-TR-UNV-TBL

DISCRE TE LED CONFIGURATION

The discrete LED array utilize individual secondary optics per LED color (i.e. red, green, blue, white). This array increases optical performance from 4° to 60° allowing for superior beam control and increased efficiency. The increased optical control allows for maximum peak candela allowing longer throws.

Black Linear





- - -- - - -- -PS9 DMXFX

HORIZONTAL SPREAD LENS

10°

20°

40°

60°

100°

Field installable 10°, 20°, 40°, 60°, and HSL

10°X60°

OPTICAL KIT

1 FIXTUREPROSPOT 9 PS9

2 WATTAGE

30 WLOW OUTPUT LO

50 WMEDIUM OUTPUT MO

85WHIGH OUTPUT HO

5 OPTICS

HSL

OK

10

20

40

60

100

5°: Discrete LED chips only5° 5

3G ANSI 136.31 ratedTRUNNION TR

KNUCKLE KN

EXAUD-X

EXA-X

Ceiling canopy is painted to match fixture unless specified otherwise

PENDANT PNS-X

6 MOUNTING

EXTENDED ARM

EXT. ARM UP & DOWN

Extended arm wall or ground mount

Concealed cable

Extended arm uplight and downlight wall or ground mount

X = pendant or arm length 10 OPTIONS

Field installableVISOR ACCESSORY VS

Field installableSNOOT ACCESSORY SN

Field installableWIRE GUARD ACCESSORY WG

7 VOLTAGE

SPECIFICATION

32 4 6 7 8 9 101

Separate options with dashes

PS9 DMXFX

3 CCTRED, GREEN, BLUE, 30K

RED, GREEN, BLUE, 40K

RED, GREEN, BLUE, AMBER

RGB30

RGB40

RGBA

4 LED CONFIGURATIONDISCRETE

QUAD CLUSTER

D

Q

Kelvin tunable 2200K-6500K

Horticulture applications only

ACTIVE WHITE

LIFTED FULL SPECTRUM

AWH

LFS

CONTROL & WIRING ORDER OP TIONS

EXTERIOR LEADER CABLES5.0 FT LEADER CABLE LC-5Plug & Play (PNP) connection option requires a leader cable for each run - 32 fixtures max per run

EXTERIOR JUMPER CABLES1.0 FT JUMPER CABLE JC-1

2.0 FT JUMPER CABLE JC-2



25.0 FT JUMPER CABLEJumper cables are required if fixtures are not mounted in an end-to-end continuous manner and for line voltage only

A wireless receiver Hoffman enclosure intended to be installed before a run of fixtures

A wireless transmitter inside a IP67 rated Hoffman enclosure intended to be installed in the line of sight or a Repeater or a receiver

Requires 120/277V AC input and Belden 9841 DMX cable output to fixture run

Requires 120/277V AC power input and Belden 9841 DMX cable input from a DMX source

DMX/RDM Distribution Kit consists of four outputs

All connections and seals by others. DMX is hard wired from the Hoffman enclosure to all necessary luminaire j-boxes

Each output is limited to (1) run per output - up to 32 fixtures max. If a Lens Defroster is ordered, up to 16 fixtures max.

All connections and seals by others. DMX is hard wired from the DMX source to the Hoffman enclosure

Four terminators are included for end of line termination

JC-25

White cables provided with white fixtures, black cables provided with black fixtures unless white cabling (WC) option is ordered

DMX DISTRIBUTION & PROGRAMMING KIT - REQUIREDDMX/RDM DISTRIBUTION KIT (4 OUTPUTS) - IP67 CDS-RDM

Go to DMX guide > Go to cable guide >

WIRELESS DMX COMPONENTSWIRELESS TRANSMITTER ENCLOSURE (REQUIRED)

WIRELESS RECEIVER

WTRE

WRCE

Leaders and cables are not available with 347V or 480V

2.50" DIA. POLE ADAPTOR PA2Field installable

Field installable 4.00"- 4.50" poles

Field installable

Field installable

Available with TR mounting only




2.38" TENON ADAPTOR TA2

POLE MOUNT 4 PM4

4.00" TENON ADAPTOR TA4

CORROSION RES. FINISH CRF

LENS DEFROSTER LDA heating element on the lens ignites with the use of DMX controls to melt snow and ice.

SWIVEL CANOPY SCFor use with indoor pendant mount only

Pharos DMX control required

WHITE CABLING WC

PLUG & PLAY CONNECTION PNP

TAMPER PROOF HARDWARE TP

Option allows for continuous fixture connection and carries power & data from fixture to fixture

May require jumper cables (see below for details)

PNP is not available with pendant or knuckle mount

A T-Connector is provided (see page 7 for details)

White cabling/connectors option

White fixtures are provided with white cables standard

All other fixture finishes are provided with black cabling unless WC option is specified

Not available with 347V or 480V standard

Corrosion Resistance Finish Complies with ASTM B117 standard

CRF is recommended for coastal or extreme exterior environments

5

Contact factory for 347V (black cable/flying lead only)347V 347

8 CONTROLSDMX FIXTURE RES. DMXFX

9 FINISH

TEXTURED WHITE TW

TEXTURED LIGHT BRONZE TLB

TEXTURED BLACK TBL

TEXTURED GREY TG

TEXTURED NATURAL TN

TEXTURED BRONZE TBR

TEXTURED SANDSTONE TS

CUSTOM COLOR CCContact factory for custom color - additional charges will apply

DMX control system must be ordered seperately

See DMX Guide for Wireless DMX options

Requires DMX/RDM Distribution Kit see below

120

277

120V

277V

https://insightlighting.com/products/pharos/

https://insightlighting.com/download/dmx-guide/

Black Linear





-PS9 -- -- - - -- - DMXFX

FIXTURES PER 10 AMP CIRCUIT (FULL LOAD)

LOW OUTPUT (30 W) MEDIUM OUTPUT (50 W) HIGH OUTPUT (85 W)

277V

92

120V

40

277V

55

120V

24

277V

32

120V

14

FIXTURE

PROSPOT 9

PERFORMANCE

POWER

LOW OUTPUT (30 W) - RGB40 MEDIUM OUTPUT (50 W) - RGB40 HIGH OUTPUT (85 W) - RGB40

OPTIC PEAKCANDELA

129148

18490

11540

2490

1083

401

-

PEAKCANDELA

167184

74523

22844

4743

2501

946

12227

PEAKCANDELA

29840

-

25644

-

3534

-

-

LUMINAREEFFICACY

50.0 LM/W

43.0 LM/W

46.0 LM/W

39.0 LM/W

30.0 LM/W

37.0 LM/W

-

LUMINAREEFFICACY

62.9 LM/W

47.9 LM/W

49.9 LM/W

51.9 LM/W

50.2 LM/W

45.6 LM/W

51.7 LM/W

LUMINAREEFFICACY

26.0 LM/W

-

41.0 LM/W

-

41.0 LM/W

-

-

DELIVERED LUMENS

1605 LM

1291 LM

1394 LM

1398 LM

1204 LM

1839 LM

-

DELIVERED LUMENS

3268 LM

2495 LM

2596 LM

2700 LM

2511 LM

2323 LM

2584 LM

DELIVERED LUMENS

2488 LM

-

3985 LM

-

3930 LM

-

-

5° (4.9°)

10° (10.1°)

20° (18.3°)

40° (43.3°)

60° (58.7°)

100° (102.4°)

HSL

DMX: Standard 32 fixtures per DMX splitter output protocol applies

10°, 20°, 40°, 60°,100° are based on quad chip test results

Black Linear





-PS9 - -- - - -- - DMXFX-

10.05”

6.75”

9.50”

11.48”

2.00”

3.00”

5.28”

186°Ø1.26”

MOUNTING

2.75” Ø0.20”4.75”

2.00”

10.05”

4.38”

Ø0.45”

6.04”

MOUNTING

ANGLES OF ROTATION2.89”

6.04”

12.02”

11.83”

12.20”

180°

4.94”

0.69”

6.96”5.28”

2.00”

6.04”

SPECIFY6.00” MIN

96.00” MAX

10.05”90°

OPTIONALSWIVEL

CANOPY (SC)

MOUNTING

T-BAR PROVIDEDFITS 4.0 J-BOX 5.00”

6.00”SWIVEL BRACKET

PROVIDEDFITS 4.0 J-BOX

DIMENSIONS

TRUNNION MOUNT (TR)

KNUCKLE (KN)

PENDANT (PNS)

Black Linear





-PS9 - -- - - -- - DMXFX-

10.05”

1.32”

6.50”

3.71”

Ø0.44”

MOUNTING

6.75 ”

186°

SPECIFY10.00” MIN24.00” MAX

6.50”

3.71”

Ø0.44”

MOUNTING

48.0” LEAD NEUTRAL VOLTAGE

GROUND

DATA -DATA +

WIRING

2.88”

3.38” 16.88”

186°

186°

2.88”

3.38”

16.88”

186° 186°

EXTENDED ARM (EXA)

EXTENDED ARM UP & DOWN (EXAUD)

DIMENSIONS

Black Linear





-PS9 - -- - - -- - DMXFX-

VISOR (VS)

5.00”10.28”

OP TICAL KIT (OK)

5.66”

0.38”

SNOOT (SN)

5.00”10.28”

WIREGUARD (WG)

5.74”

0.46”

POLE MOUNT 4 (PM4)

2.50" DIAME TER POLE MOUNT (PA2)

PLUG AND PL AY CONNECTION (PNP)

2.38" TENNON (TA2) 4.00" TENNON (TA4)

2.50”

186°

2.00”

2.00”6.25”

2.00”

15.71”

55°55°

15.71”

186°

2.00”

4.50”

2.00”6.25”

2.00”

55°55°

2.50”

1.50”

2X STAINLESSSTEEL CLAMPSSAME FINISHAS FIXTURE

4.00”- 4.50”

3.00”

5.07”

01

01

02 02 03 02 04

LEADER CABLE (LC-5) MUST ORDER SEPARATELY, ONE REQUIRED FROM J-BOX TO FIRST FIXTURE RUN

02 T-CONNECTOR (ACT): ONE SUPPLIED FOR EACH FIXTURE ORDERED WITH PLUG & PLAY OPTION (PNP). ALLOWS FOR PLUG & PLAY INSTALLATION.

03 JUMPER CABLE (JC-X): OPTIONAL. ALLOWS FOR ADDITIONAL SPACING BETWEEN FIXTURES. AVAILABLE LENGTHS 1’, 2’, 5’, 10’, 25’.

04 CAP/ATM: SUPPLIED. MUST BE INSTALLED AT THE END OF EACH FIXTURE RUN.

Black Linear





-PS9 - -- - - -- - DMXFX-

CABLES

0.90”

2.30” 0.42”

5.0’, 10.0’, 25.0’

WHITE | NEUTRAL

ORANGE | DATA-

RED | DATA+

GREEN | GROUND

BLACK | LINE VOLTAGE

1.0’, 2.0’, 5.0’, 10.0’, 25.0’

0.90”

2.30” 0.42” 2.30”

0.50”

0.94”

2.30”

0.90”

AC LEADER (LC-X)

AC JUMPER (JC-X)

ACT CONNECTOR (ACT)

AC JUMPER (JC-X) AC JUMPER (JC-X)

0.90”

2.30” 0.42” 2.30”

14.60”

14.60”

prospot 9 - insight lighting

Documents