prospects of t & d equipment manufacturing in india
TRANSCRIPT
SUMMER TRAINING REPORT
On
PROSPECTS OF TRANSMISSION & DISTRIBUTION EQUIPMENT MANUFACTURING IN INDIA
Exploring the Business Opportunity in Manufacturing Sector
At
Feedback Infrastructure Services Private Limited
JUNE-JULY, 2012
Under the Guidance of
Mr. ANURAG RAIZADA
Principal Consultant, Energy Division
Feedback Infrastructure Services Private Ltd.
Mr. J. S. S. RAO
Principal Director
National Power Training Institute
Prepared By
ABHINAV GUPTA
Roll No. 1120812182
MBA - Power Management, Batch: 2011-13
NATIONAL POWER TRAINING INSTITUTE (NPTI), Faridabad
Submitted to
MAHARISHI DAYANAND UNIVERSITY, ROHTAK
DECLARATION
I, ABHINAV GUPTA, Roll No. 1120812182, student of MBA-Power Management (2011-13)
at National Power Training Institute (NPTI), Faridabad hereby declare that the Summer Training
Report entitled
“PROSPECTS OF TRANSMISSION & DISTRIBUTION EQUIPMENT
MANUFACTURING IN INDIA”
is an original work and the same has not been submitted to any other institute for the award of
any other degree.
A Seminar presentation of the Training Report was made on 29 th August, 2012 and the
suggestions as approved by the faculty were duly incorporated.
Presentation In-Charge Signature of the Candidate
(Faculty)
Countersigned
Director/Principal of the Institute
ii
ACKNOWLEDGEMENT
It’s my immense pleasure to present this report under the subject of ‘Prospects of Transmission
& Distribution Equipment Manufacturing in India’. I take this opportunity to express my
gratitude to the people who have been instrumental in the successful completion of the project.
I would like to express my sincere gratitude to Mr. Devtosh Chaturvedi, Director, Energy
Division and Mr. Anurag Raizada, Principal Consultant, Energy Division of Feedback
Infrastructure Services Private Limited for giving me an opportunity to work under their
guidance and a rare chance to work on a prominent project.
I would like to express my heartiest thanks to Mr. Dilip Behera, Consultant, Energy Division,
Feedback Infrastructure Services Private Limited for giving me a chance to work with him,
providing me with the necessary resources, ideas and facilitating me in this project.
I am also thankful to Mr. J.S.S. Rao, Principal Director, CAMPS (NPTI); Mr. S.K. Chaudhary,
Principal Director, CAMPS; Mrs. Manju Mam, Dy. Director, NPTI; Mrs. Indu Maheshwari, Dy.
Director, NPTI; for arranging my summer internship at Feedback Infrastructure Services Private
Limited. It’s my privilege to have Mr. J.S.S. Rao, Principal Director, CAMPS (NPTI) as my
internal project guide. He has been a constant source of motivation and guidance throughout
the course of my internship.
I also extend my thanks to all the faculties and my batch mates in CAMPS (NPTI), for their
support and guidance throughout the course of internship.
ABHINAV GUPTA
iii
TABLE OF CONTENTS
Sr. No. CONTENTS Page No.CERTIFICATE FROM INDUSTRY iDECLARATION iiACKNOWLEDGEMENT iiiTABLE OF CONTENTS ivLIST OF FIGURES viLIST OF TABLES viiABBREVIATIONS ixEXECUTIVE SUMMARY x
1 INTRODUCTION 11.1 Transmission & Distribution Equipment Industry 11.2 Problem Statement 21.3 Objective 21.4 Organization Profile 2
2 LITERATURE REVIEW AND RESEARCH METHODOLOGY 52.1 Literature Survey 52.2 Research Methodology 6
3 SCENARIO OF POWER SECTOR IN INDIA 73.1 Indian Power Sector 73.2 Power Sector Performance in 11th Plan 8
3.2.1 Capacity Addition: Generation 83.2.2 Transmission System in India 93.2.3 Capacity Addition: Transmission Lines 103.2.4 Capacity Addition: EHV Substations 123.2.5 Performance of Distribution Sector 143.2.6 Technological Development 16
3.3 Transmission & Distribution Sector in 12th Plan 183.3.1 Envisaged Growth in 12th Plan 183.3.2 Addition of Transmission Lines 203.3.3 Addition of Substations 213.3.4 Development of National Grid: Inter-State Transmission Capacity 223.3.5 Growth of Distribution Business 23
4 INDIAN ELECTRICAL T&D EQUIPMENT INDUSTRY 284.1 Industry Scenario 284.2 Cable & Conductor 30
4.2.1 Cable 304.2.2 Types of Cable 304.2.3 Conductor 314.2.4 Types of Conductor 314.2.5 Competitor Analysis 324.2.6 Financial Analysis 344.2.7 Industry Performance 354.2.8 Market Prospects 36
4.3 Transmission Tower 38
iv
4.3.1 Types of Transmission Tower 394.3.2 Competitor Analysis 414.3.3 Financial Analysis 454.3.4 Industry Performance 464.3.5 Market Prospects 47
4.4 Switchgear & Control Instruments 484.4.1 Constituents of Switchgear 484.4.2 Competitor Analysis 514.4.3 Financial Analysis 574.4.4 Industry Performance 574.4.5 Demand Segments 584.4.6 Market Prospects 60
4.5 Transformer 604.5.1 Major Components of Transformer 614.5.2 Market Analysis 644.5.3 Competitor Analysis 674.5.4 Financial Analysis 734.5.5 Growth in Market Size 734.5.6 Prospective Clients 744.5.7 Business Risk 75
4.6 Energy Meter 754.6.1 Types of Energy Meter 764.6.2 Competitor Analysis 804.6.3 Industry Performance 834.6.4 Market Prospects 84
5 CHALLENGES AND ISSUES 875.1 Increasing Imports: A Major Challenge 875.2 Critical Issues 88
6 CONCLUSION AND RECOMMENDATIONS 906.1 Business Opportunities 906.2 Cables 906.3 Conductors 906.4 Transmission Towers 916.5 Switchgears & Controls 916.6 Transformers 926.7 Energy Meters 92
BIBLIOGRAPHY AND REFERENCES 94ANNEXURE - I 96ANNEXURE – II 97
v
LIST OF FIGURES
NAME OF FIGURE Page No.Figure 1: Per Capita Yearly Electricity Consumption 8Figure 1: Trend in Transmission Line Growth 11Figure 2: Voltage Segmentation in Growth of Transmission Lines 12Figure 3: Trend in Substation Capacity Growth 13Figure 4: Voltage Segmentation in Growth of Substation Capacity 14Figure 5: AT&C Loss: Past Performance and Future Expectations 15Figure 6: Infrastructure Addition in 11th Plan 18Figure 7: Structure of T&D Network Planning 18Figure 8: Sourcing of Financial Investment 19Figure 9: Transmission Line Length (Ckm): Share of Voltage Level in Different Plans 20Figure 10: Substation Capacity (MVA): Share of Voltage Level in Different Plans 21Figure 11: Cumulative Growth of Inter-State Transmission Capacity (MW) 22Figure 12: Growth of T&D Lines below 66 kV 23Figure 13: Growth of (All) T&D Equipments Industry in India 28Figure 14: Growth of Major T&D Equipments in India 29Figure 15: Cable 30Figure 16: Cross Sectional View of Three Core Belted Cable 31Figure 17: Aluminum Conductor 31Figure 18: ACSR Conductor 31Figure 19: Cable Industry: Past Performance and Expected Market Size 37Figure 20: Conductor Industry: Past Performance and Expected Market Size 37Figure 21: Cable & Conductor: Export Trend 38Figure 22: Transmission Tower 39Figure 23: Waist Type Tower 40Figure 24: Double Circuit Tower 40Figure 25: Steel Tubular Pole 40Figure 26: Guyed-V Tower 41Figure 27: Tower Industry: Past Performance and Expected Market Size 47Figure 28: Switchgear: Circuit Breaker 48Figure 29: Oil Circuit Breaker 48Figure 30: Voltage Circuit Breaker 49Figure 31: Gas Circuit Breaker 50Figure 32: Current Transformer 51Figure 33: Voltage Transformer 51Figure 34: Export of Switchgear Instruments 58Figure 35: Switchgear Industry: Past Performance and Expected Market Size 60Figure 36: Transformer 61Figure 37: Transformer Windings 61Figure 38: Core 62Figure 39: Conservator Tank 62Figure 40: Radiator 62Figure 41: Buchholz Relay 63Figure 42: Bushings 63
vi
Figure 43: Demand Drivers fo Transformer 65Figure 44: Transformer Industry: Past Performance and Expected Market Size 74Figure 45: Energy Meter 75Figure 46: Electromechanical Meter 76Figure 47: Electronic Meter 77Figure 48: HTMD Meter 77Figure 49: Apex Meters 78Figure 50: LTCT Meter 78Figure 51: LT Whole Current Meter 79Figure 52: Prepaid Meter 79Figure 53: Running Cycle of Prepaid Meter 80Figure 54: Export of Electrical Meters 84Figure 55: Metering Industry: Past Performance and Expected Market Size 86Figure 56: CHINA: Import Trend of Electrical Equipments 87Figure 57: KOREA: Import Trend of Electrical Equipments 88
LIST OF TABLES
NAME OF TABLE Page No.Table 1: Snapshot: Indian Power Sector 7Table 1: Planwise Generation Capacity Addition 9Table 2: Growth of Transmission Lines (Ckm) 10Table 3: Growth of Substation Capacity (MVA) 13Table 4: 12th Plan: Investment Layout in Power Sector 19Table 5: Planned addition of Transmission Lines (Ckm) in 12th Plan (2012-2017) 20Table 6: Planned Addition of Substation Capacity in 12th Plan (2012-2017) 22Table 7: Distribution Sector: Network Enhancement in 12th Plan 24Table 8: AT&C Losses: Projected Performance 25Table 9: Transmission & Distribution Equipments 28Table 10: Sterlite Technologies Limited 32Table 11: JSK Industries Pvt. Limited 32Table 12: Diamond Power Infrastructure Limited 33Table 13: Deepak Cables (India) Limited 33Table 14: KEC International 34Table 15: Competitor Performance 34Table 16: Performance of Cable & Transmission Line Industry 35Table 17: Strategic Analysis 36Table 18: Voltage Segmentation of Power System 38Table 19: Kalpataru Power Transmission Limited 41Table 20: IVRCL 41Table 21: KEC International 42Table 22: Diamond Power Infrastructure Limited 42Table 23: Jyoti Structures Limited 43Table 24: Gammon India Ltd 43Table 25: Unitech Power Transmission Ltd 44
vii
Table 26: Aster Private Ltd 44Table 27: Man Structurals Pvt. Ltd 45Table 28: Competitor Performance 45Table 29: Performance of Transmission Line Industry 46Table 30: Strategic Analysis 46Table 31: Bharat Heavy Electricals Limited (BHEL) 51Table 32: Siemens India Limited 52Table 33: ABB Limited 53Table 34: Crompton Greaves Limited 53Table 35: Alstom (Areva) T&D India Limited 54Table 36: Biecco Lawrie Limited 55Table 37: Jyoti Limited 55Table 38: Vishal Transformers & Switchgears (P) Ltd 55Table 39: Heptacare Power Industries Pvt. Limited 56Table 40: Hivoltrans Electricals Pvt. Ltd 56Table 41: Kappa Electricals 57Table 42: Competitor Performance 57Table 43: Performance of Switchgear Industry 58Table 44: Strategic Analysis 59Table 45: Types of Transformer 61Table 46: Transformer: Domestic Demand Vs Supply 64Table 47: Performance of Transformer Industry 65Table 48: Transformer: Demand Creators 66Table 49: Transformer Exports from India 66Table 50: Transformer Industry: Prominent Players 67Table 51: Bharat Heavy Electricals Limited (BHEL) 67Table 52: Siemens India Limited 68Table 53: ABB Limited 68Table 54: Crompton Greaves Limited 69Table 55: Alstom (Areva) T&D India Limited 70Table 56: Transformers & Rectifiers 71Table 57: Vijai Electricals 71Table 58: Voltamp 71Table 59: Bharat Bijlee 72Table 60: EMCO 72Table 61: Competitor Analysis 73Table 62: Genus Power Infrastructures Ltd 80Table 63: Secure Meters Limited 81Table 64: L&T Limited (Electrical & Automation Division) 82Table 65: ECE Industries Limited 82Table 66: HPL Metering Pvt. Ltd 83Table 67: Capital Power Systems Ltd 83Table 68: Performance of Metering Industry 84Table 69: Strategic Analysis 85
viii
ABBREVIATIONS
ABC Areal Bunched Conductor IPTCIndependent Power Transmission Company
ACA Additional Central Assistance IS Indian StandardACAR Aluminum Core Alloy Reinforced ISTS Interstate Transmission SystemACS Average Cost of Supply I-STS Intra-State Transmission SystemACSR Aluminum Core Steel Reinforced JV Joint VentureAMR Automatic Meter Reading kV Kilo VoltARR Average revenue Realized kWh Kilowatt Hour
AT&CAggregate Technical & Commercial Losses
LCD Liquid Crystal Display
ATO Annual Turn Over LTCT Low Tension Current TransformerCAGR Compound Annual Growth Rate LV Low VoltageCEA Central Electricity Authority MCB Miniature Circuit BreakerCkm Circuit Kilometer MCCB Molded Case Circuit BreakerCRGO Cold Rolled Grain Oriented MV Medium VoltageCT Current Transformer MVA Mega Volt AmpereCTU Central Transmission Utility MW Mega WattCVD Counter Veiling Duty OCB Oil Circuit BreakerDISCOM
Distribution Company PGCIL Power Grid Corporation of India Limited
DT Distribution Transformer R&D Research & DevelopmentED Energy Division R-APDRP Restructured-APDRD
EE Electrical Equipment RGGVYRajiv Gandhi Gramin Vidyutikaran Yojna
EHV Extra High Voltage RoW Right of WayEPC Engineering, Procurement, Construction SAD Special Additional Duty
EU European Union SCADASupervisory Control And Data Acquisition System
FY Financial Year SEB State Electricity BoardFYP Five Year Plan STU State Transmission UtilityGENCO Generation Company T&D Transmission & DistributionGIS Gas Insulated Switchgear ToD Time of DayHCTC High Capacity Transmission Corridor TRANSCO Transmission CompanyHTMD High Tension Maximum Demand UHV Ultra High VoltageHVAC High Voltage Alternating Current VCB Vacuum Circuit BreakerHVDC High Voltage Direct Current VT Voltage TransformerHVDS High Voltage Distribution System WC Whole CurrentIEEMA Indian Electrical Equipment XLPE Cross Link Poly Ethylene
ix
Manufacturing AssociationINR Indian Rupees YoY Year on Year
x
EXECUTIVE SUMMARY
Indian Power Sector has witnessed the robust growth during the 11 th Five Year Plan. Power
generation capacity of 53,000 MW has been added in 11th Plan which is ever highest among any
five year plan. The focus of investments in the Indian Power Sector has typically been on the
generation segment, while the importance of Transmission and Distribution segment has always
been undervalued. During 11th Plan, about 55% of total investment in the power sector was in the
generation segment, 15% in transmission and 30% in distribution. This investment pattern needs
to be revised. Investment in the generation, transmission and distribution segments should ideally
be in the ratio of 2:1:2. During the 12th plan, 47% of the total investment in the sector has been
earmarked for the generation segment while the rest has been reserved for T&D and other
segments. Power transmission is the backbone of whole power system for any country. To
transmit more power from one end to another, even more robust and reliable network is required.
In India, voltage level at 220 kV and above is used for long distance power transfer. In the 11 th
Plan, focus has been to shift the operating transmission voltage level from 220 kV & 400 kV
towards 765 kV. Initial efforts in 1200 kV segment has also been made successfully. HVDC
transmission has emerged as more convenient way to transmit power for distance more than 800-
1000 km. Accordingly, availability of equipments of suitable voltage level have become prime
need of the time for the further development. Indian T&D equipment industry has grown faster
in 2009-10 and 2010-11 as compared to 2007-08 and 2008-09. It reflects high degree of
correlation between generation capacity addition activity and corresponding enhancement of
transmission & Distribution system.
In this development, now the importance of T&D manufacturing industry can not be subdued.
Balance between demand and; timely & cost effective supply of equipment affects the growth of
transmission & distribution network and hence connectivity between generator and the end
consumer. Today country’s major T&D equipment market has crossed the mark of INR 64,000
Crore. Indian T&D manufacturing industry comprises a mixture of around four hundred; Power,
Distribution and instrument transformer manufacturers, one hundred fifty switchgear
manufacturers, fifty energy meter manufacturers, seventy capacitor manufacturers, one hundred
fifty cable manufacturers and approx fifty insulator manufacturers.
xi
Overall, Indian T&D equipment manufacturing industry is able to cater the domestic demand.
Additionally, industry exports various kinds of equipments to the foreign market. This portfolio
especially comprises small & medium; power and distribution transformers, switchgears,
conductors etc. Import portfolio includes EHV cables, large transformers electric rotating
machines etc.
Although this industry is flooded with more than one thousand manufacturers yet most of the
market share is held by a few leading multinational players. It is mainly because of poor
attention on Research and Development to explore new technologies. Today, in spite of being
one of the largest markets in the world; domestic manufacturers are not able to fulfill country’s
demand of equipments. In order to become self dependent, Indian Government has Vision 2022
set for Indian Electrical Equipment Industry to make India the country of choice for the
production of electrical equipment and reach an output of INR 5 Lakh Crore by balancing
exports and imports. To achieve the vision, concerted efforts by all stakeholders including
government, industry and industry association, needs to be deployed.
According to Indian Electrical Equipment Manufacturing Association (IEEMA) which consists
95% of Indian Manufacturing Companies; performance of industry has remained average
compared to last year. Cable and Energy Meter industry has been able to lead the industry in
2011-12.
Equipment CategoryMarket Size in 2011-12
(INR Crore)Growth in 2011-12 (YoY) CAGR (11th Plan)
Cables 19,496 25.7% 14.5%
Conductors 5,914 4.3% 5.9%
Transmission Towers 6,257 -5.2% 6.4%
Switchgears 8,882 -2.4% 7.9%
Transformers 12,498 1.2% 5.5%
Capacitors 506 -1.8% 10.8%
Energy Meters 2,387 6.1% 5.8%
Rotating Machines 6,373 1% 5.5%
xii
Although Year on Year (YoY) basis, growth rate at 6.6% in 2011-12 half as compared to 13.7%
in 2010-11 yet over the last five years industry size has increased at a CAGR of 8.5%. It is a sign
of long term growth of the equipment industry.
xiii
CHAPTER - 1
INTRODUCTION
1.1 Transmission & Distribution Equipment Industry
The process of power generation and its eventual transmission and distribution (T&D) can be
compared to the process by which food grains are supplied to cities from the places where they
are produced and stored. Even if the warehouses are full with food grains, the transport
infrastructure should be in good condition for the food grains to reach the end-users. If transport
infrastructure is inefficient and inadequate, it not only results in to supply shortage but also leads
to wastage during transport. In case of power, generation capacity is the warehouse and T&D
infrastructure plays the role of transport facility.
Considering the rapidly increasing demand of power in country, massive generation capacity is
planned to fulfill this demand. At the same time, huge investment is required in building up the
T&D infrastructure so as to ensure efficient supply of power. The power transmission and
distribution equipment industry is a critical part of the Indian power sector. Power generation is
key growth-driver for the equipment manufacturing industry.
In India, power transmission equipment companies include those who manufacture transmission
lines and towers, substations, equipments like transformers, reactors and electrical equipments
like electrical meters and metering solutions. Indian T&D equipment market is fragmented. It is
characterized by the presence of a number of small and medium enterprises yet some major
players dominate the market share. These companies do their business through different routes
available in the market. In an EPC contract route, the EPC contractor (EPCC) agrees to deliver a
completely commissioned plant to the owner for an agreed amount. This is just as a builder who
hands over the keys of a fully furnished flat to a purchaser. Transmission equipment companies
that are in the business of setting up transmission lines and towers; and substations follow the
EPC route wherein they take up turnkey projects. Companies that deal in manufacturing
transformers and electric meters, directly sell them to Power Grid Corp (PGCIL), State
Electricity Boards (SEB’s) and other private distribution companies.
xiv
1.2 Problem Statement
The electrical T&D equipment industry in India has a long history. Clocked at 6.6% growth in
the FY 2011-12, it covers over 1,500 units of varying sizes, amounting for an annual turnover of
about INR 64,000 Crores. It amounts for more than INR 20,000 Crores of annual exports and
above INR 32,000 Crores of annual imports; it has a negative trade balance which has been
increasing in recent times.
In spite of increasing imports, this industry has a very good potential for domestic as well as
export market in most of the developing and some of the developed countries. But matter is the
correct assessment of the market and selection of right equipment segment to enter in the
manufacturing business.
1.3 Objective
The objective of this report is as under
i) Analyzing the performance of Indian Electrical T&D equipment industry during last five to
ten years and current status.
ii) Analyzing the prospects and growth drivers of T&D equipment industry in next five to ten
years in India.
iii) Identification of equipment segment and exploring the business opportunity for a new entrant
in the market.
1.4 Organization Profile
Feedback Infrastructure Services Private Limited, more commonly known as Feedback Infra, is a
leading professional and technical services company in the infrastructure sector in India. From
concept to commissioning, Company offers an integrated suite of services across all sectors of
infrastructure.
Headquartered in Gurgaon, Feedback Infra has 5 regional offices and 70 project offices
nationally. Besides India, Feedback has projects in Afghanistan, Africa, Australia, Bangladesh,
Bhutan, Europe, Indonesia, Malaysia, Middle East, Nepal, Singapore, Sri Lanka and Syria.
xv
Feedback Infra is enabled by a large pool of multidisciplinary experts; cutting-edge functional
and domain knowledge; an all-India network of offices; and a strong shareholding — L&T,
IDFC, and HDFC.
The Various sectors are Transportation & Logistics, Energy, Housing & Townships, Commercial
Infrastructure, Industrial Infrastructure, Water & Sanitation, Retail & Entertainment, Healthcare,
Hospitality, Urban Development and Special Economic Zones
Feedback is presently working on more than 35,000 MW of new power generation capacity;
20,000 km of National and State Highways; 100,000 acres of real estate development and a
building area of more than 22 million square feet.
Energy Division (ED) is an integral part of the energy and fuel landscape in India, handholding
utilities through the reform and re-structuring process and introducing and guiding private
investments in the sector. From, identifying and evaluating business opportunities, structuring of
projects, representing the clients in the financial and power markets, providing implementation
support and performance management capabilities, Feedback Infra has built valuable
relationships with utilities; Indian and global energy majors and with individual captive plants.
Its services range from policy framework creation addressing sectoral issues, to project-driven
customized services meeting specific needs of the client.
In generation, Energy Division (ED) offers coal and IPP entry strategies, tariff studies, project
structuring, business plans and long-term fuel strategy procurement.
In transmission, ED offers transmission service agreements, cost of service, energy accounting at
the SLDC level, merit and UI trade analysis and grid support changes.
In distribution, the division conducts the valuation of an existing business, a “go-no-go” analysis,
set up distribution franchisees, offer tariff rationalization, ways to enhance revenues, reduce
T&D losses and costs of service.
In the regulatory area, ED assists with the ARR filings, review of regulations and regulatory
comparison, open access regulations and PPA renegotiations.
xvi
In the renewable area, ED provides strategic advisory services through the entire project cycle -
from site evaluation to post commissioning support; including assessment of business models,
technology issues, policy and regulatory factors.
In the energy efficiency space, ED enjoys a strong domestic and an evolving international
presence. As a Grade-II ESCO, it goes beyond providing traditional advisory or engineering
design services - offering guaranteed energy conservation solutions and project
development/management services to the household, industry, commercial and rural sector.
In the information technology space, ED is a leader in providing IT solutions to the Power
Distribution utilities and has undertaken IT assisted performance improvement for utilities across
the country. The Division is also moving into the Smart Grid arena with international
accreditations under its belt.
xvii
CHAPTER – 2
LITERATURE REVIEW AND RESEARCH METHODOLOGY
2.1 Literature Survey
The global electrical equipment industry consists of the following two segments:
i) Global heavy electrical equipment market — power generating equipment, including wind
turbines, and other heavy electrical equipments such as power turbines, heavy electrical
machinery intended for fixed-use and large electrical systems.
ii) Global electrical components and equipment market — electric power cables, transformers
and electrical switchgear, transmission line towers, etc.
The global EE market is expected to increase from more than US$ 3 trillion (2008-15) to US$
6.8 trillion (2016-30). This translates into ~2% CAGR over the long term. Asia-Pacific and
Europe together account for more than 70% of the global market, with Asia- Pacific‘s share
being 45%. This region is expected to see the strongest demand in future due to the region‘s
strong expected economic growth rates.
Globally, growth rates have been less-than-impressive in recent years in the electrical equipment
market, but there is scope for expansion in certain geographical areas, such as the emerging
markets in the Asia-Pacific region. Robust economic growth in emerging countries such as China
and India, combined with rapid urbanization and strong growth in fixed investment spending in
these countries, is expected to boost the demand for electrical equipment in these countries.
A period of deregulation is being witnessed in the power sectors of most countries, with an
increase in the number of independent power distributors and operators who are capable of
supplying services at different points in the power sector value chain. In developed countries,
rising ecological concerns and investment in alternative sources of power generation should
benefit the heavy electric power equipment segment such as the wind turbines.
Global trade in EE products accounts for 3% of the overall trade. While global trade has grown
at 5.2% CAGR (2006-10), while trade in EE has grown by 5.8% over the same period, thus
increasing its share in the global trade. Global trade in EE has reached US$ 453 billion in 2010,
xviii
with China being the leading exporter of electrical equipment with over 15 percent share. India
accounts for less than 1% of the total share of exports. USA and China are the largest import
markets in the world for EE. India imports 2% of total EE trade of the world. India has a trade
deficit in EE trade, with imports higher than exports, consistently for the last many years.
Switchgears and rotating machines together cover ~36% of the trade market. China is the leading
exporter in rotating machines as well as transformers with more than 16% share, while India has
less than 2% share in global trade of these products. US is the largest importer of rotating
machines as well as transformers. China dominates trade in most of these product segments.
Segments such as rotating machines, transformers, lamps, cables are dominated by China with
double digit shares in global trade. Countries like Japan, US and Germany dominate trade in a
few segments like switchgears, insulators, capacitors etc.
2.2 Research Methodology
The project is based on the basic concept of research methodology. The following concepts are
directly or indirectly used while dong this project.
Collection of Data
Secondary source of data collection has been adopted. Sources of data have been the companies’
websites and different commercial & ministry websites.
Population
Prominent players in the manufacturing sector have been chosen from the population mean.
Analysis Pattern
Comparative analysis of different companies has been carried out.
xix
CHAPTER - 3
SCENARIO OF POWER SECTOR IN INDIA
3.1 Indian Power Sector
Indian power sector has witnessed a rapid growth in all verticals i.e. generation, transmission and
distribution. Generation sector which saw the fastest growth during last five years was followed
by transmission capability enhancement. On the third dimension, distribution sector has now
achieved the pace of reforms especially in last five years. Corrective measures taken after
economic crisis of 1991, whole power sector has proved to be a great opportunity; especially for
private players.
Table 70: Snapshot: Indian Power Sector
Area 32.8 Lakh sq kmPopulation (Census 2011) 1.21 BillionPer Capita Electricity Consumption
(2010-11) 814 kWh per annum
Installed Generation Capacity
205,340 MW(June 2012)
Thermal: 136,436 MWHydro: 39,291 MWNuclear: 4,780 MWRES: 24,833 MW
Installed Transmission Capacity
(May 2012)
Transmission Line Length EHV Substation CapacityTotal: 270,873 ckm Total: 420,561 MVA500 kV HVDC: 9,432 ckm 500 kV HVDC: 11,200 MW765 kV: 6,337 ckm 765 kV: 30,500 MVA400 kV: 114,277 ckm 400 kV: 152,342 MVA220 kV: 140,827 ckm 220 kV: 226,519 MVA
Unbundled Discoms (2000-11) 73Average AT&C Losses (2009-10) 27.15%Electrified Villages Up to 11th Plan 90%
Source: CEA, Planning Commission
The power generation capacity added in the 11 th Plan, which ended in March 2012, was around
53,000 MW. It is close to 68% of the originally projected addition (78,700 MW during the plan
period). But the capacity addition achieved is no mean accomplishment, given that the quantum
is similar to what the country had added in the previous three Five-Year Plans (15 years ended
March 2007). In fact, 20,501 MW of addition last fiscal was the highest for any year and is close
to 21,180 MW added in the whole of 10 th Plan period (2002-07). Increasing population,
xx
improving lifestyle, developing infrastructure and growth has led the higher demand of power.
Consistent increase in per capita annual electricity consumption is reflected by growth in power
sector. Elasticity between the overall growth of the country and that of power sector has been in
the range of 0.8 to 0.9.
The investment climate is very
positive in the power sector. Due to
policy liberalization, the power sector
has witnessed higher investment flows
than envisaged. The power ministry
has set a target for adding 76,000 MW
of electricity generation capacity in
the 12th Plan (2012-17) and 93,000
MW in the 13th Plan (2017-2022). The
Working Group on Power for
formulation of the 12th Plan has
estimated total fund requirement of INR 1,372,580 Crore for the power sector. During the 12 th
Plan, main sources of financing are commercial banks, public financial institutions, dedicated
infrastructure/power finance institutions, insurance companies, overseas markets,
bilateral/multilateral credit, bond markets and equity markets. In addition, steps have been taken
by government to make available funds through Credit Enhancement Schemes and Infrastructure
Debt Fund etc.
3.2 Power Sector Performance in 11th Plan
3.2.1 Capacity Addition: Generation
11th Plan has emerged as the best inception period for private companies. On a positive note, the
better execution capabilities of private players came forth in the last FYP. Approx 23,000 MW of
capacity is added by the private sector during the 11th plan. Much of the capacity addition was
again through the thermal route. The working group envisages more than 40,015 MW of 76,000
MW of capacity to be added by private players in the current plan (ended 2017).
xxi
2002-03
2003-04
2004-05
2005-06
2006-07
2007-08
2008-09
2009-10
2010-11
0
100
200
300
400
500
600
700
800
900
566.
7 592
612.
5
631.
5
671.
9 717.
1
734.
5 779 81
4
kWh
(Uni
t)
Source: CEA
Figure 58: Per Capita Yearly Electricity Consumption
Table 71: Planwise Generation Capacity Addition
Plan Central Sector State Sector Private Sector TotalTarget Actual Target Actual Target Actual Target Actual
7th Plan 9,320 9,534.5 12,925 11,867 0 0 22,245 21,406% Achievement 102% 92% 0% 96%
8th Plan 12,858 8,157 14,870 6,835 2,810 1,430 30,538 16,423% Achievement 63.4% 46% 60% 54%
9th Plan 11,904 4,504 10,748 9,353 17,589 5,262 40,245 19,119% Achievement 37.8% 87% 30% 48%
10th Plan 22,832 13,005 11,157 6,245 7,121 1,931 41,110 21,180% Achievement 57% 56% 27% 52%
11th Plan 21,222 15,220 21,355 16,732 19,797 23,013 62,374 54,964% Achievement 71.7% 77% 118% 88%Source: CEA
3.2.2 Transmission Systems in India
The transmission systems that are in place in the country consist of Inter-State Transmission
System (ISTS) and Intra State Transmission System (Intra-STS).
Inter-State Transmission System (ISTS)
ISTS is mainly owned and operated by Power Grid Corporation of India Limited
(POWERGRID) which is also Central Transmission Utility (CTU). In future, Inter State
Transmission System (ISTS) schemes would be built through competitive bidding and many
private sector entities would own and operate the ISTS elements. Already, various ISTS schemes
owned by the private sector or joint venture (JV) between private sector and POWERGRID are
under construction. The ISTS serves the following purpose:
Evacuation of power from inter-state generating stations which have beneficiaries in more
than one state.
Onwards transmission of power to power from inter-state generation stations up to the
delivery point of the state grid.
Transfer of operational surpluses from surplus state(s) to deficit state(s) or from surplus
region(s) to deficit region(s).
Intra State Transmission System (Intra-STS)
xxii
Intra-STS within the state are mainly owned and operated by the state transmission utilities of
each state. The Intra-STS serves the following purpose:
Evacuation of power from generating stations having beneficiaries in the same state.
Power transmission within the State from ISTS boundary up to the various substations of the
state grid network.
Power transmission within the state grid for delivery to the load centre within the state.
3.2.3 Capacity Addition: Transmission Lines
A program for construction of 88,515 ckm transmission lines for evacuation of power from
generating stations as well as for strengthening of transmission network was envisaged at the
beginning of the 11th Plan corresponding to generation capacity addition program of 78,700
MW.
Table 72: Growth of Transmission Lines (Ckm)
At the end of 6th Plan 7th Plan 8th Plan 9th Plan 10th Plan 11th Plan(As on Mar-2012)±500 kV HVDC
Central 0 0 1,634 3,234 4,368 5,948State 0 0 0 1,504 1,504 1,504JV/Private 0 0 0 0 0 1,980Total 0 0 1,634 4,738 5,872 9,432
765 kVCentral 0 0 0 751 1,775 5,319State 0 0 0 409 409 411Total 0 0 0 1,160 2,184 5,730
400 kVCentral 1,831 13,068 23,001 29,345 48,708 75,974State 4,198 6,756 13,141 20,033 24,730 33,681JV/Private 0 0 0 0 2,284 8,443Total 6,029 19,824 36,142 49,378 75,722 11,3367
220 kVCentral 1,641 4,560 6,564 8,687 9,444 11,004State 44,364 55,071 73,036 88,306 105,185 128,823JV/Private 0 0 0 0 0 468Total 46,005 59,631 79,600 96,993 114,629 140,164Progressive Growth 52,034 79,455 117,376 152,269 198,407 Total# 268,693Source: CEA
xxiii
Subsequently, during the mid-term appraisal by the Planning Commission, generation capacity
target for the 11th Plan was scaled down to 62,374 MW. Accordingly, 68,673 ckm of
transmission line addition in the 11th Plan was anticipated during Mid-Term appraisal of the
Planning Commission. This comprises 2,773 ckm of 765 kV lines, 40,000 ckm of 400 kV lines,
24,300 ckm for 220 kV lines and 1600 ckm for HVDC lines. Against this program, actual
addition of transmission lines during 11th Plan was 75,148 ckm comprising of 3,546 ckm of 765
kV lines, 3,560 ckm of HVDC lines, 37,645 ckm of 400 kV lines and 25,535 ckm of 220 kV
lines.
During last six Five Year Plans country has added the transmission line at a CAGR of 39%. 11 th
Plan has witnessed the largest line addition of 75,148 ckm. Total length up to 11 th plan has been
38% more over the cumulative length up to 10th Plan. It is more than 1.62 times of the lines
added during 10th Plan. During last six FYP, transmission lines at the voltage level of 400 kV and
765 kV have grown at CAGR of 81% & 122% respectively. It indicates more focus towards
higher voltage level in order to minimize the transmission losses. Higher interest in HVDC
projects has been shown to overcome the limitation of AC transmission. In 11 th Plan private
players have entered in to this segment.
Figure 59: Trend in Transmission Line Growth
6th Plan 7th Plan 8th Plan 9th Plan 10th Plan 11th Plan0
50000
100000
150000
200000
250000
300000
52,034.000
79,455.000
117,376.000
152,269.000
268.693
268.693
CAGR: 39%
xxiv
Transmission lines at the voltage level of 220 kV has shown consistent average growth rate of
25% over last six FYP. Central Transmission Utility (CTU) i.e. Power Grid has made an
impressive addition of more than 12,000 MW in interregional transmission capacity. Hence total
interregional transfer capacity has reached up to 28,000 MW by the end of 11th Plan.
Figure 60: Voltage Segmentation in Growth of Transmission Lines
6th Plan 7th Plan 8th Plan 9th Plan 10th Plan 11th Plan0
20000
40000
60000
80000
100000
120000
140000
160000
0 0 1634
4738
5872 94
32
0 0 0 1160
2184 57
30
6029
1982
4 3614
2 4937
8
7572
2
113.367
4600
5 5963
1 7960
0 9699
3 1146
29
140.164
±500 kV HVDC 765 kV 400 kV 220 kV
India is now looking at linking the transmission system with its neighboring countries Bhutan,
Nepal and Sri Lanka. There are also plans to develop an undersea HVDC transmission link
between Sri Lanka and India.
3.2.4 Capacity Addition: EHV Substations
A program of 157,691 MVA of transformation capacity corresponding to generation capacity
addition program of 78,700 MW was envisaged at the beginning of the 11th Plan. During the
mid-term appraisal by the Planning Commission, no revision in transformation capacity addition
program was indicated. Actual achievement of transformation capacity addition during 11th Plan
clocked at 153,362 MVA comprising of 25,000 MVA at 765 kV level, 3,000 MW of HVDC,
58,085 MVA at 400 kV level and 67,277 MVA at 220 kV level.
xxv
Table 73: Growth of Substation Capacity (MVA)
At the end of 6th Plan 7th Plan 8th Plan 9th Plan 10th Plan 11th Plan(As on Mar-2012)±500 kV HVDC
Central 0 0 0 3,500 6,500 9,500State 0 0 0 1,700 1,700 1,700JV/Private 0 0 0 0 0 0Total 0 0 0 5,200 8,200 11,200
765 kVCentral 0 0 0 0 0 24,000State 0 0 0 1,000Total 0 0 0 0 0 25,000
400 kVCentral 715 6,760 17,340 23,575 40,455 77,225State 8,615 14,820 23,525 36,805 52,487 73,172JV/Private 0 0 0 0 0 630Total 9,330 21,580 40,865 60,380 92,942 151,027
220 kVCentral 500 1,881 2,566 1,866 4,276 6,436State 36,791 51,861 81,611 113,497 152,221 215,771JV/Private 0 0 0 0 0 1,567Total 37,291 53,742 84,177 116,363 156,497 223,774Progressive Growth 46,621 75,322 125,042 181,943 257,639 Total# 411,001Source: CEA
During last six FYP, country has added the substation capacity at a CAGR of 54%. Total
capacity up to 11th plan has been 60% more over the cumulative capacity up to 10th Plan.
Figure 61: Trend in Substation Capacity Growth
6th Plan 7th Plan 8th Plan 9th Plan 10th Plan 11th Plan0
50000
100000
150000
200000
250000
300000
350000
400000
450000
4662175322
125.042
181.943
257639
411001
CAGR: 54%
xxvi
During the 10th Plan, capacity addition was of 75,696 MVA while in 11th Plan it reached the
record level of 153,362 MVA. It is almost two times of the capacity added during 10 th Plan.
Transmission substations at the voltage level of 400 kV and 220 kV have grown at CAGR of
74% & 43% respectively.
Figure 62: Voltage Segmentation in Growth of Substation Capacity
6th Plan 7th Plan 8th Plan 9th Plan 10th Plan 11th Plan0
50000
100000
150000
200000
250000
0 0 0 5200
8200
1120
0
0 0 0 0 0
2500
0
9330 21
580
4086
5
6038
0 9294
2
1510
27
3729
1
5374
2 84.177
116.363
1564
97
2237
74
±500 kV HVDC 765 kV 400 kV 220 kV
Over a span of five years, involvement of private players in T&D sector has changed from
nascent stage to mature level. In the IPTC & JV route collectively INR 20,000 has been invested
so far. Eight Inter-state transmission projects have been awarded through competitive bidding in
the past few years. On the state level several STUs have awarded projects to private players to
develop Intra-state transmission network.
In the manufacturing/manufacturing cum EPC segment there are more than fifty players in the
market. Further this segment is very broad due to presence of several small, medium & large
manufacturing companies and several medium & large EPC companies in the field. This segment
consists of Indian as well as foreign players and has witnessed a large growth in terms of number
of players and manufacturing capacity.
3.2.5 Performance of Distribution Sector
xxvii
During the 11th Plan, emphasis was on creation of capacity in Sub-transmission & Distribution
system to strengthen the Distribution sector. Emphasis has been given to Metering, Consumer
Indexing, adoption of IT facilities, GIS mapping, modern payment system, HVDS, Rural
franchise etc.
Access to Power for Population of India
As per Census 2001, 80% of the total inhabited villages were electrified and 44% of the rural
households had access to electricity. As on 31st July 2011, total of 96% of the villages of the
country have access to electricity.
Aggregate Technical & Commercial Losses
Accelerated Power Development and Reforms Program (APDRP) was launched in 2002-03 as an
Additional Central Assistance (ACA) to finance the modernization of sub-transmission &
distribution networks with the main objectives to reduce AT&C losses to 15%. AT&C loss at
national level has been reduced from 38.86% in 2001-02 to 27.15% during 2009-10. While some
states have shown an improvement in AT&C Loss reduction, it is pertinent to note that the
absolute loss levels are still at a higher level with respect to losses and require further efforts for
loss reduction.
xxviii
2002-03
2003-04
2004-05
2005-06
2006-07
2007-08
2008-09
2009-10
2010-11
2011-12
2012-13
2013-14
2014-15
0
5
10
15
20
25
30
35
40
32.534.8 34.3
33.030.6
29.527.7 27.2
25.223.3
21.519.7
18.0
Perc
enta
ge (
%)
Source: CEA
Figure 63: AT&C Loss: Past Performance and Future Expectations
Revenue Loss (ARR and ACS Gap)
As per the PFC report on ‘Performance of State Power Utilities’ for the year 2009-10 the cash
losses (revenue and subsidy realized basis) of utilities selling power directly to consumers
increased from INR 17,620 Crore in the FY 2007-08 to INR 42,415 Crore in the FY 2009-10.
The cumulative book losses (accrual basis) of the state utilities have increased from INR 79,339
Crore as on 31.03.2009 to INR 106,247 Crore at the end of year 2009-10. Gap between Average
Cost of Supply (ACS) and Average Revenue Realized (ARR) is widening and has increased to
INR 0.73 per unit in 2009-10 from Rs.0.37 per unit in 2007-08 on subsidy realized basis. While
some states have shown improvement in the financial health, others are yet to demonstrate the
impact of the policy initiatives. In order to restore the commercial viability of the distribution
companies it is necessary to eliminate the gap between (ARR) and (ACS).
Mounting of Debt on Utilities
The total borrowings of state DISCOMs have touched INR 177,602 Crore as on 31.03.2010 and
total interest charged from state utilities in year 2009-10 is INR 15,651 Crore. RBI has taken
cognizance of the difficult financial situations of DISCOMs and their attempts to bridge cash
losses by short term borrowings. In order to bridge the gap between revenue and expenditure and
to service interest on borrowing states resort to short-term borrowing and even divert long-term
loans to bridge cash losses. Conversion of existing Government loans to DISCOMs into
Government equity will help cash flow of DISCOMs because now subsidy payable by State
Government is adjusted against interest on loan.
3.2.6 Technological Development
In order to utilize the resources optimally, transmission and distribution network planning has
been moved away from the earlier generation evacuation system planning to integral system
planning. T&D network planning is a continuous process of identification of system addition
requirements, their timing and need. The transmission requirements could arise from
New generation additions in the system
Increase in demand
General system strengthening
xxix
These transmission addition requirements are identified, studied and firmed through the
transmission planning process. While the predominant technology for electricity transmission
and distribution has been Alternating Current (AC) technology, High Voltage Direct Current
(HVDC) technology has also been used for interconnection of all regional grids across the
country and for bulk transmission of power over long distances.
On the distribution end, system automation, implementation of SCADA, GIS, Asset
Management and High Voltage Distribution System (HVDS) has attracted the industry. This is
an effort to minimize system losses and energy pilferage which is degrading the financial health
of distribution utilities at a very fast pace. The reforms in distribution sector could arise from
Increase in demand and new connections
High system losses
Replacement of old system
Lack of new technology in distribution system
Lack of commercial principles
In order to meet the increasing power demand and address right-of-way (RoW) issue, higher
voltage technology is being adopted for developing transmission infrastructure. PGCIL has tried
to be an early adopter of new technologies and is moving towards higher voltage transmission
systems. It is currently focused on introducing 1,200 kV A/C voltage in the country. In May
2012, PGCIL in collaboration with 35 local and global manufacturers established 1,200 kV ultra
high voltages A/C test station at Bina (Madhya Pradesh) for the development of 1,200kV
equipment at large scale. In HVDC segment, it is implementing world’s longest ±800 kV, 6,000
MW Bi-pole multi terminal link of 2,000 km. It will connect Biswanath Chariyali in the north-
eastern region which is rich in hydro resources; to the Agra in northern region which is a power
deficit region.
Extensive use of Gas Insulated Switchgear substations, SCADA, Compact Tower Design, Phasor
Measurement Units, and Wide Area Measurement System etc is being done.
In the distribution segment, implementation of Supervisory Control and Data Acquisition System
(SCADA), Geographical Information System (GIS), Automatic Meter Reading (AMR), Smart
xxx
Metering, High Voltage Distribution System (HVDS), Prepaid Metering, 24*7 Customer Care,
DT Metering etc. are under progress.
3.3 Transmission & Distribution Sector in 12th Plan
3.3.1 Envisaged Growth in 12th Plan
Identification of transmission expansion
requirement for a plan period is done based on
power system studies corresponding to the
generation capacity addition program and
forecasted demand scenario expected at the
end of that plan. Transmission alternatives are
identified after the detailed studies based on
which the specific schemes are evolved, and
re-evolved taking into account the changes in
the generation program from time to time and subsequently discussed and firmed up.
Figure 65: Structure of T&D Network Planning
xxxi
Sub-transmission System132 kV and 66 kV
Distribution System33 kV, 11 kV & below
Transmission SystemPower system above 220 kV
New connectionsIncrease in demandIntra-state transmission abilityGeneral system strengtheningImplementation of new technology
Evacuation from new power plantsIncrease in demandInter-state transmission abilityGeneral system strengthening
Transmission & Distribution Capacity Expansion Planning
Transmission System Planning Distribution System Planning
Transmission Lines (Ckm) Substation Capacity (MVA)0
20,000
40,000
60,000
80,000
100,000
120,000
140,000
160,000
180,000
70286
153.362
86072197
Total Private
Source: CEA
Figure 64: Infrastructure Addition in 11th Plan
The implementation program is subsequently worked out keeping in view identification of
projects, schemes and transmission elements that should be implemented matching with program
of generation capacity addition and load growth on yearly basis during the plan.
The 11th Plan fund requirement for the power sector was INR 1,031,600 Crore. The All India
Expenditure in power sector for 11th Plan has been about INR 707,278 Crore. For 12 th Plan,
Planning Commission has envisaged an ambitious investment of INR 1,124,600 Crore. This is
9% more than earlier envisaged amount and 59% higher than actual expenditure during 11th Plan.
Table 74: 12th Plan: Investment Layout in Power Sector
Physical Plan Investment (INR) CroreGeneration 75,785 MW 638,600Transmission 109,440 Ckm; 283,000 MVA 180,000Distribution System Automation, RAPDRP, RGGVY 306,000Total 1,124,600
Source: Planning Commission
The total fund requirement for development of
T&D system is estimated to be of the order of
INR 180,000 Crore (INR 100,000 Crore in
Central Sector, INR 55,000 Crore in State Sector
and INR 25,000 Crore in Private Sector).
In the Central Sector, there is no problem of
capital resources for setting up transmission
facilities. However, in the State Sector some of
the STUs require financial support, especially for
building transmission system for renewable
energy sources such as wind, solar and small
hydro. It is proposed that viability gap funding may be provided on case to case basis for
building intra-State transmission system for renewable generation and conventional hydro
stations.
The increase in the transmission lines of 220 kV and above voltage levels, in terms of circuit km,
have been around five times in last 26 years and that for substation capacity more than seven
times in the same period. There has been more increase in the transmission system at higher
xxxii
Source: Planning Commission
Figure 66: Sourcing of Financial Investment
voltage levels and substation capacities. This aspect of growth in transmission highlights
requirements of transmission network to carry bulk power over longer distances and at the same
time optimize right of way, minimize losses and improve grid reliability.
3.3.2 Addition of Transmission Lines
During 11th Plan, various 765 kV lines and substations have been added and a more are under
construction. The trend of increasing 765 kV systems in the grid is going to continue in the 12 th
Plan also. A number of new 765 kV lines and substations have been planned for evacuation of
bulk power in the range of 3,000 - 6,000 MW to longer distances. Their actual realization would
depend upon progress of associated generation projects. The planned 765 kV transmission
systems are expected to be implemented during 12th Plan or early 13th Plan period. Most of the
planned 765 kV systems are initially being operated at 400 kV. Their 765 kV operation depends
upon associated generation projects, which could be in 12th Plan or beyond.
Table 75: Planned addition of Transmission Lines (Ckm) in 12th Plan (2012-2017)
HVDC Bi-pole 765 kV 400 kV 220 kV Total Ckm9,440 27,000 38,000 35,000 109,440
Source: Ministry of Power
During 12th Plan period, a total of about 109,440 ckm of transmission lines have been planned for
addition. In this, 400 kV lines will dominate over other voltage levels but simultaneously there is
a decrement of 21% contribution than in 11th Plan.
Figure 67: Transmission Line Length (Ckm): Share of Voltage Level in Different Plans
10th Plan 11th Plan 12th Plan0%
10%
20%
30%
40%
50%
60%
2%5%
9%
2%
5%
25%
57%
56%
35%38%
34%
32%
500 kV/800 kV HVDC
765 kV
400 kV
220 kVCAGR: 413%
xxxiii
765 kV lines are going to take place of 400 kV lines as there is direct increment of 20% in their
contribution during 12th Plan. Over a period of last three FYP it will achieve a CAGR of 413%
which shows the country’s rapid adoption of higher voltage technology in order to facilitate large
amount of power transmission lines and reducing the need of ‘Right of Way’ requirement.
PGCIL is constructing 11 High Capacity Transmission Corridors (HCTC) to evacuate 80 GW of
generation capacity consisting six UMPPs of 28,000 MW and 55,000 MW for IPPs in coal rich
eastern region and coastal areas. The high capacity corridors entail the construction of 23,000
ckm. 70% of total ckm will be in 765 kV level while 30% in 400 kV level. These ambitious
corridors require estimated fund of INR 58,000 Crore. These projects are scheduled to be
commissioned over next five to seven year of time.
3.3.3 Addition of Substations
During the 12th Plan 270,000 MVA of AC transformation capacity and 13,000 MW of HVDC
substations are planned to be added.
Figure 68: Substation Capacity (MVA): Share of Voltage Level in Different Plans
10th Plan 11th Plan 12th Plan0%
10%
20%
30%
40%
50%
60%
4% 2% 5%0%
16%
53%
42%
38%
16%
54%
44%
27%
500 kV/800 kV HVDC
765 kV
400 kV
220 kV
Contribution of 765 kV substations will achieve robust growth. Just within next five years its
contribution will increase from mere 16% to highest level of 53%. 400 kV substations will see
steep downfall from 38% to only 16%. As the development of substation is to be kept in pace
with corresponding voltage level of transmission lines therefore 765 kV will dominate here too.
xxxiv
Table 76: Planned Addition of Substation Capacity in 12th Plan (2012-2017)
HVDC 765 kV 400 kV 220 kV Total MVA13,000 14,9000 45,000 76,000 283,000
Source: Ministry of Power
Timely development of transmission network requires firming up of the specific transmission
schemes corresponding to specific generation projects, which particularly in respect of inter-state
transmission system, need to be done 3 to 5 years ahead of the target date of completion. There
has been a consistent increase in the transmission network and transformation capacity of the
country. This increase is in consonance with increase in generation and demand of electricity in
the country. 11 HCTC under construction require 29 EHV substations aggregating over 60,000
MVA and four HVDC terminals totaling 7,000 MW Capacity.
3.3.4 Development of National Grid: Inter-State Transmission Capacity
Generation planning studies carried out by CEA had indicated that the capacity addition planned
on all-India basis is less than that planned on regional basis. Further, a strong all-India integrated
national grid enables harnessing of unevenly distributed generation resources in the country.
Recognizing the need for development of National grid, thrust was given to enhance the capacity
of inter-regional links in a phased manner.
Figure 69: Cumulative Growth of Inter-State Transmission Capacity (MW)
9th Plan
10th Plan
11th Plan
12th Plan
0 10,000 20,000 30,000 40,000 50,000 60,000 70,000
5,750
14,050
28,000
65,800
CAGR:
125%
Total Inter-regional transmission capacity by the end of 9th Plan was 5,750 MW. During 10th Plan
i.e. 2002-07, a total of 8,300 MW of capacity was added. At the end of 10th Plan capacity reached
at 14,050 MW which has crossed the level of 28,000 MW by the end of 11 th Plan. Addition of
xxxv
Source: CEA
37,800 MW in 12th Plan has been envisaged to make cumulative capacity to the mark of 65,800
MW.
It is expected that, at the end of 12th Plan, each region in the country would be connected to an
adjacent region(s) through at least two high capacity synchronous 400 kV or 765 kV lines and a
HVDC Bi-pole/back-to-back link. This would make the National Grid a large, meshed
synchronous transmission grid where all the regional and State grids in them would be
electrically connected and operating at single frequency.
3.3.5 Growth of Distribution Business
Distribution sector has been
remaining the underperformer
since late 70s. Various reasons as
described earlier did not let the
distribution business run on
commercial principles. Now the
discoms are in the dire need of
financial bail out package but it
doesn’t seem the long term
solution for sustainable
development and survival. In the 12th Plan period, certain goals have been set to achieve.
Capacity Addition and Investment
Planning Commission has envisaged the investment of INR 306,235 Crore in distribution sector.
This investment can majorly be further divided in to following category of equipments and
activities.
New Lines: In the 12th Plan, 1,305,000 ckm of new lines are required to be added. In this, share
of LV lines will be 47%, while 11 kV lines and 33 kV will be 43% and 10% respectively. This
will require a sum of INR 92,730 Crore.
New Substations: In the 12th Plan, 4,400 new distribution substations of 33 kV/11 kV voltage
level are to be added. In these substations, 8,800 new power transformers are required to be put
xxxvi
1991-92
1996-97
2001-02
2006-07
2007-08
2008-09
2009-10
2010-11
0
1,000,000
2,000,000
3,000,000
4,000,000
5,000,000
6,000,000
7,000,000
8,000,00043
5829
7
4886
800
5725
890
6580
949
6902
117
7079
025
7094
129
7391
599
Source: CEA
Figure 70: Growth of T&D Lines below 66 kV
in the service which will comprise transformation capacity of 88,000 MVA. The activity will
require a sum of INR 22,000 Crore.
Table 77: Distribution Sector: Network Enhancement in 12th Plan
Sr. No.
Name of Segment UnitsPhysical
Financial (INR Crore)
2012-17 2012-17I New Lines (i) 33 kV O/H Line Ckm 121,500 9,720 33 kV U/G Cable Ckm 13,500 4,050 Total 33 kV line Ckm 135,000 (ii) 11 kV O/H Line Ckm 448,000 22,400 11 kV U/G Cable Ckm 112,000 22,400 Total 11 kV Line Ckm 560,000 (iii) LV O/H Ckm 488,000 24,400 LV ABC Ckm 122,000 9,760 Total LV Ckm 610,000 II Installation of New S/S 33/11 kV (2*10 MVA) Nos. 4,400 22,000 No. of 10 MVA Transformers Nos. 8,800 Transformation Capacity MVA 88,000 III Installation of DT's Including all Accessories MVA 105,000 1000 KVA Nos. 10,500 1,260 630 KVA Nos. 33,500 3,350 315 KVA Nos. 67,000 4,020 200 KVA Nos. 105,000 5,250 100 KVA Nos. 210,000 8,400 25 KVA Nos. 424,000 8,480 Total No. of DT's Nos. 850,000 IV Augmentation of S/S 33/11 kV MVA 50,000 10,000 11/0.4 kV MVA 50,000 10,000
V CapacitorsMVA
R16,000 1,280
VI Service Connections 50,000,000 25,000VII Re-Conductoring of Lines (i) 33 kV Ckm 100,000 3,000 (ii) 11 kV Ckm 500,000 10,000 (iii) LV Ckm 1,000,000 20,000 Sub Total 224,770 Productive Load Scheme 61,940 Smart Grid 9,500
xxxvii
IT facilities & SCADA including HRD 10,000 R&D 25 Total 306,235Source: Planning Commission
Distribution Transformers: Distribution transformers comprising transformation capacity of
105,000 MVA are to be be added in the 12th Plan. Total number of required transformer will be
850,000 in which DTs of 25 kVA will have largest chunk of 424,000 nos. This is because of
greater focus on rural electrification in which DTs of small capacity are required in large
number. It will require an investment of INR 30,760 Crore.
System Augmentation: Capacity enhancement of existing substations, replacement of old
components and equipment revamping will need an investment of INR 79,280 Crore. It will
comprise substation’s transformation capacity enhancement, installation of capacitors, expenses
due to new service connections, re-conductoring of distribution line etc.
IT Implementation: With increased focus on IT implementation in distribution system, a sum of
INR 81,465 Crore has been planned for investment. This is to enhance the operational and
commercial performance of the distribution utilities.
Reduction of AT&C Losses
It has been the most focused activity for last ten years in the Indian power distribution industry.
Still, expected results have not been received in last ten years. For the next five years, Planning
Commission is very optimistic in terms of AT&C loss reduction from a current level to 18% by
the end of FY 2014-15.
Table 78: AT&C Losses: Projected Performance
Region State 2009-10 10-11 11-12 12-13 13-14 14-15
Input Energy (MU)
AT&C Loss (%)
Eastern Bihar 9,281 43.92 40.92 37.92 34.92 31.92 28.92Jharkhand 8,396 10.43 8.93 7.43 5.93 4.43 2.93OrissaCESCO 6,232 39.99 36.99 33.99 30.99 27.99 26.49NESCO 4,705 36.68 33.68 30.68 27.68 26.18 24.58SESCO 2,286 51.01 48.01 45.01 42.01 39.01 36.01
xxxviii
WESCO 6,301 37.58 34.58 31.58 28.58 27.08 25.58Sikkim 512 51.37 48.37 45.37 42.37 39.37 36.37WB 25,427 33.24 30.24 27.24 25.74 24.24 22.74
North East
AP 670 52.99 49.99 46.99 43.99 40.99 37.99Assam 4,392 29.03 27.53 26.03 24.53 23.03 21.53Manipur 454 48.02 45.02 42.02 39.02 36.02 33.02Meghalaya 1,342 48.73 45.73 42.73 39.73 36.73 33.73Mizoram 320 39.06 36.06 33.06 30.06 28.56 27.06Nagaland 385 45.97 42.97 39.97 36.97 33.97 30.97Tripura 672 29.17 27.67 24.67 21.67 18.67 15.67
Northern
DelhiBRPL 9,667 19.83 18.33 16.83 15.33 13.83 12.33BYPL 5,645 28.63 27.13 25.63 24.13 22.63 21.13NDPL 6,910 15.69 14.19 12.69 11.19 9.69 8.19HaryanaDHBVNL 15,884 28.1 26.6 25.1 23.6 22.1 20.6UHBVNL 15,211 29.91 28.41 26.91 25.41 23.91 22.41HP 6,806 18.47 16.97 15.47 13.97 12.47 10.97J&K 9,813 70.45 67.45 64.45 61.45 58.45 55.45Punjab 38,806 17.73 16.23 14.73 13.23 11.73 10.23RajasthanAVVNL 12,345 33.04 30.04 27.04 22.04 21.04 18.04JDVVNL 12,820 31.51 28.51 25.51 22.51 19.51 16.51JVVNL 16,286 26.69 25.19 23.69 22.19 20.69 19.19UPDVVNL 13,143 49.62 46.62 43.62 40.62 37.62 34.62MVVNL 9,653 28.72 27.22 25.72 24.22 22.72 21.22PaVVNL 17,766 27.92 26.42 24.92 23.42 21.92 20.42PoVVNL 12,783 54.46 51.46 48.46 45.46 42.46 39.46KESCO 2,722 37.36 34.36 31.36 28.36 26.86 25.36Uttaranchal 8,280 33.53 30.53 27.53 24.53 21.53 18.53
Southern APAPCPDCL 31,933 17.93 16.43 14.93 13.43 11.93 10.43APEPDCL 10,814 9.69 8.19 6.69 5.19 3.69 2.19APNPDCL 10,464 18.52 17.02 15.52 14.02 12.52 11.02APSPDCL 15,300 16.63 15.13 13.63 12.13 10.63 9.13KarnatakaBESCOM 20,317 21.1 19.6 18.1 16.6 15.1 13.6GESCOM 5,764 38.05 35.05 32.05 29.05 27.55 26.05HESCOM 7,402 28.51 27.01 25.51 24.01 22.51 21.01MESCOM 3,274 18.39 16.89 15.39 13.89 12.39 10.89CHESCOM 4,245 28.22 26.72 25.22 23.72 22.22 20.72Kerala 16,129 14.89 13.39 11.89 10.39 8.89 7.39Pondicherry 2,527 19.35 17.85 16.35 14.85 13.35 11.85
xxxix
Tamil Nadu 66,974 20.15 18.65 17.15 15.65 14.15 12.65
Western
Chhattisgarh 18,476 37.98 34.98 31.98 28.98 27.48 25.98Goa 2,962 7.77 6.27 4.77 3027 1.77 0.27GujaratDGVCL 10,565 15.23 13.73 12.23 10.73 9.23 7.73MGVCL 6,727 15.27 13.77 12.27 10.77 9.27 7.77PGVCL 19,858 32.34 30.84 29.34 27.84 26.34 24.84UGVCL 14,891 18.89 17.39 15.89 14.39 12.89 11.39MPMPMKVVCL
10,563 42.26 39.26 36.26 33.26 30.26 27.26MPPKVVCL 12,705 36.16 33.16 30.16 28.66 27.16 25.66MPPUKVVCL
9,632 46.11 43.11 40.11 37.11 34.11 31.11MaharashtraMSEDCL 80,526 25.02 23.52 22.02 20.52 19.02 17.52Grand Total 667,963 27.15 25.23 23.31 21.48 19.73 17.99
Source: Planning Commission
xl
CHAPTER – 4
INDIAN ELECTRICAL T&D EQUIPMENT INDUSTRY
4.1 Industry Scenario
Transmission and Distribution sector encompasses more than hundred major, medium and small
equipments and components. From application point of view it can divide broadly in two
sections. Indian T&D equipment industry consist of variety of products. Today the industry’s
size is estimated at INR 64,072 Crore.
Table 79: Transmission & Distribution Equipments
Transmission Line Components Substation Components1 Conductors Circuit Breaker2 Transmission Towers Isolator3 Insulators Current Transformer4 Wave Trap Potential Transformer5 Auto Re-Closer Lighting Arrester6 Vibration Damper Bus Bar7 Corona Rings Control Panels8 Other Accessories Relays9 Capacitor Bank10 Battery Bank11 Metering Instruments
xli
Figure 71: Growth of (All) T&D Equipments Industry in India
2000-01 2001-02 2002-03 2003-04 2004-05 2005-06 2006-07 2007-08 2008-09 2009-10 2010-11 2011-120
10,000
20,000
30,000
40,000
50,000
60,000
70,000
80,000
90,000
7,4
15
9,6
60
10
,20
0
12
,10
5
18
,02
0
24
,30
0
38
,92
0
45
,73
0
47,49652,863
60
,10
5
64,072
INR
Cro
re
The T&D equipment market has registered a compound annual growth rate (CAGR) of 21.7%,
from INR 7,400 Crore in 2000-2001 to INR 64,072 Crore in 2011-12. This growth has been
driven by increased generation capacity addition and subsequent need to augment the T&D
network.
xlii
Source: IEEMA
Figure 72: Growth of Major T&D Equipments in India
Source: IEEMA
Growth rate of the Indian electrical equipment industry has decelerated to 6.6% in 2011-12 as
compared to 11.3% and 13.7% in 2009-10 and 2010-11 respectively. Imports of electrical
equipment have grown in the past five years at a CAGR of 28.28%. Current export-import trends
based on 27 major ports trade data indicates that imports continue to rise for 765 kV transformers
& reactors (mostly through power project imports), insulators, LV switchgear and HV cables.
Total Imports of 765 kV transformers & reactors in 2011-12 were INR 1,229 Crores; in the last
quarter (Q4) 2011-12, imports sharply increased by 125% (INR 687 Crores) over the combined
total of the first three quarters (INR 542 Crores).
4.2 Cable & Conductor
4.2.1 Cable
Cables are used when underground transmission or
distribution is required. These cables are laid in ducts or may be buried in the ground. Unlike in
overhead lines, air does not form part of the insulation, and the conductor must be completely
xliii
2008-09 2009-10 2010-11 2011-12
-3.5
13.3
12.2
10
14.5
21.2
-2.4
4.4
12.1
16.9
25.7
-1.2
9.1
13.5
1.22.
6
10.7
34.9
-1.8
-8.2
11.3
15.4
6.1
13.5
9.2
4
-0.8
2.7
11.3 13
.7
6.6
Rotating Machines Switchgear Cables Transformers Capacitors Energy Meters Transmission Lines Total
Figure 73: Cable
insulated. Thus cables are much more costly than overhead lines. Cable consists of core that is
made of copper. For insulation purpose, different type of material & medium are used. It depends
upon the level of voltage to transmitting power.
4.2.2 Types of Cable
High voltage cables are generally single cored, and hence have their separate insulation and
mechanical protection by sheaths. In the older paper insulated cables, the sheath was of extruded
lead.
Paper Insulated Power Cables
The insulation consists mainly of paper tape impregnated with compound. The paper must be
free from ligneous fibers and from metallic or other conducting spots. The compound with
which the paper is insulated should be of such a consistency that it is plastic at ordinary
temperatures, and has no tendency to drain away from the cable.
The impregnating compound varies from manufacturer to manufacturer, but they all are based on
paraffinic or naphthenic mineral oil, with resin frequently added to lower the viscosity and to
improve its impregnating qualities. The paper is made from Manila fiber or wood pulp.
Three-Core Belted Type Cables
In the case of a 3-core cable, the 3-cores are
individually insulated with paper insulation. The filler
space between the core insulation is also filled up with insulation, but depriving these of voids is
much more difficult. Belt insulation is used on top of
all three core insulations, and the lead sheath is
extruded over this. Over the lead sheath, there is
generally bitumen to prevent damage.
Pressurized High Voltage Cables
Oil Pressure Cables
Gas Pressure Cables
xliv
Figure 74: Cross Sectional View of Three Core Belted Cable
These are used for extra high voltage transmission.
4.2.3 Conductor
A conductor is a material that facilitates the flow of electricity
(or electric current) through a transmission line. Different types of conductor are used in
transmission lines. They vary in number and size, depending on the type of circuit and the
transmission voltage. Steel, Aluminium and copper are the most common conducting materials
used in transmission lines.
4.2.4 Types of Conductor
Broadly two types of conductors ACSR (Aluminium Core Steel Reinforced) and ACAR
(Aluminium Core, Alloy Reinforced) are used.
Aluminum Core Steel Reinforced (ACSR)
In an ACSR conductor, a stranded steel core carries the
mechanical load, and layers of stranded aluminium
surrounding the core carry the current. ACSR conductors
are usually used for high-voltage transmission lines. Steel
strands forms central core which is surrounded by two
layers of aluminum strands. For a given resistance
conductors of different strengths can be made by taking
different properties of steel and aluminum areas. The steel core does not contribute to conduction
of current practically. The current carrying capacity and resistance of this conductor is dependent
on conductivity of aluminum.
Aluminum Core, Alloy Reinforced (ACAR)
An ACAR conductor is a stranded cable made of an aluminium alloy with low resistance and
high mechanical strength. The central core is made up from aluminum alloy which is surrounded
by layers of aluminum conductors. The conductivity is better and strength to weight ratio is equal
to ACSR conductor having same diameter. As compared to ACSR conductor, ACSR conductor
xlv
Figure 75: Aluminum Conductor
Figure 76: ACSR Conductor
is smaller in size and lower in weight for the same electrical capacity. ACAR conductors are
used for sub transmission and distribution lines.
4.2.5 Competitor Analysis
Table 80: Sterlite Technologies Limited
Year of Establishment 2006-2007
Nature of Business Manufacturing EPC
Products/Services Transmission Tower Manufacturing Commissioning and Testing of Transmission Lines & Substation Power Conductor and Cable Manufacturing
Leading Product/Service Power Conductor and Cable Manufacturing Transmission Tower Manufacturing
Infrastructure Mfg Unit: 4Annual Turnover(2010-2011 and 2009-10)
INR 2,317 Crore and INR 2,432 Crore
Technology Sourcing Indigenous
Global Footprints Across 70 countries such as: China, Denmark, India, Netherlands, Russia,
South Africa, Taiwan, Turkey, UAE, UK, USA
Indian Clientele Various SEBs across India Private companies in Power T&D field
Certification ISO 9001-2000, ISO 14001, OHSAS 18001, NABL
Table 81: JSK Industries Pvt. Limited
Year of Establishment 1965Nature of Business ManufacturingProducts/Services Power ConductorsLeading Product/Service Aluminum ConductorInfrastructure Mfg unit: 2Annual Turnover(2010-2011 and 2009-10)
INR 763 Crore and INR 498 Crore
Technology Sourcing Indigenous
Global Footprints Dubai
Indian Clientele
Various SEBs such as: MPPTCL, GETCO, LPTCL, MAHATRANSCO, TNEB
PSUs: PGCIL, BHEL Private companies such as: ABB, L&T Ltd, Torrent Power, Suzlon Energy,
EMI Transmission, Essar PowerCertification ISO 9001-2008
xlvi
Table 82: Diamond Power Infrastructure Limited
Year of Establishment 1970
Nature of Business Manufacturing EPC
Products/Services
Transmission Tower Manufacturing Transformer Manufacturing Commissioning and Testing of Transmission Lines & Substation Power Conductor and Cable Manufacturing
Leading Product/Service Commissioning and Testing of Transmission Lines & Substation Power Conductor and Cable Manufacturing
Production Capacity
LV Cable: 34,300 kmpa HV Cable: 5,800 kmpa EHV Cable: 2,000 kmpa Tower Manufacturing: 48,000 tpa
Annual Turnover(2010-2011 and 2009-10)
INR 1285 Crore and INR 735 Crore
Technology Sourcing IndigenousGlobal Footprints New-Zealand, Zimbabwe, Tanzania, Sri Lanka, Tajikistan, Bangladesh, Israel
Indian Clientele
Various SEBs of states such as: Assam, Gujarat, Haryana, Rajasthan, Karnataka, MP, Maharashtra, Punjab, UP, West Bengal
PSUs: PGCIL, BHEL, BHEL, NTPC, PGCIL, SAIL Private companies such as: ABB, L&T Ltd, EMCO, CGL, Enercon, Suzlon
Energy, Kalpataru Power Transmission, Jindal, Essar PowerCertification ISO 9001-2008, ERDA, CPRI, BIS, BSI, DIN, IEC, ASTM
Table 83: Deepak Cables (India) Limited
Year of Establishment 1982
Nature of Business Manufacturing EPC Turnkey Projects
Products/Services Power Conductor and Cable Manufacturing Erection, Commissioning and Testing of Transmission Lines & Substation
Leading Product/Service Power Conductor and Cable ManufacturingInfrastructure Mfg Unit: 2
Production Capacity Aluminum Conductor: 36,000 tpa Aluminum Wire Rods: 18,000 tpa
Technology Sourcing Indigenous
Indian Clientele Various SEBs across India Central utilities Private companies in Power T&D field
Certification ISO 9001-2000
Table 84: KEC International
Year of Establishment 1945
xlvii
Nature of Business Manufacturing EPC Services
Products/Services
Power Cable Transmission Tower Manufacturing Commissioning and Testing of Transmission Lines & Substation Infrastructure Development (Railways, Oil & Gas, Construction)
Leading Product/Service Power Cable Transmission Tower Manufacturing Commissioning and Testing of Transmission Lines & Substation
Infrastructure Mfg unit: 6 (India) + 2 (Abroad)Production Capacity Tower Manufacturing: 311,000 tpaAnnual Turnover(2010-2011 and 2009-10)
INR 4,057 Crore and INR 3,923 Crore
Technology Sourcing Indigenous
Global Footprints
Across 40 countries spread over Africa, Middle East, Central Asia, North America;
Manufacturing in Brazil and Mexico
Indian Clientele Government utilities such as: WBSEDCL, MSEDCL, PGCIL, NHPC,
MAHATRANSCO, J&K Power Development Private companies in Power T&D field
Certification ISO 9001:2000, CPRI, ISO, BIS
4.2.6 Financial Analysis
Table 85: Competitor Performance
Sr No Company Name2010-2011 (Figures in Crore)
ATO (V)
Op Ex (W)
Raw Mat. Cost (X) EBIDTA (Y) PAT (Z)
INR INR INR X/WINR
Y/V INR Z/V
1Sterlite Technologies Limited
2,317 1,995 1,585 79% 320 14% 185 8%
2JSK Industries Pvt. Limited
763 NA NA NA NA NA NA NA
3Diamond Power Infrastructure Limited (Conductor)
1,285 1,149 1,098 95% 159 12% 98 8%
4 KEC International 4,057 3,593 2,172 60% 463 11% 275 7%
4.2.7 Industry Performance
xlviii
Table 86: Performance of Cable & Transmission Line Industry
Name of the EquipmentWeight (%)
Industry Size (INR Crore)
YoY % Change
2010-11 2008-09 2009-10 2010-11 2011-12Cables 25.8 15,510 4.4 12.1 16.9 25.7PVC Power Cables 17.9 9,710 14.3 14.5 9 17.4Control & Special Purpose Cables
7.9 4,300 -26.6 2.4 34.3 44.5Transmission Lines 23.4 14,070 13.5 9.2 4 -0.8Transmission Line Towers 12.6 6,600 6.5 19 6.8 -5.2Conductors 10.8 5,670 21.3 0.2 -0.8 4.3Source: IEEMA
The Indian cable industry is highly fragmented with hundreds of cable manufacturing
companies; a larger total than can be found in any other country in the world except China. Many
of these Indian companies are small-scale cable producers. The 6.6% growth seen in the overall
electrical equipment industry during FY12 was largely driven by remarkable performance of the
cables industry. It grew by 25.7% in FY12, which came over and above the 16.9% rise in FY11.
In fact, growth in the cables industry has been steadily inching up from 4.4% in FY09. The
cables industry has grown appreciably in size. In FY11, the cables industry was estimated to be
worth INR 15,510 Crore. With changing specifications, kilometers are not the sole barometer to
judge the growth of the industry. Though there seems a slight volume growth in the industry, the
same is mandate due to increase in commodity prices. The weight age of cable industry is about
25.8% of the overall electrical industry. The growth of HV & EHV cable industry was mainly
due to acceleration in implementation to the ongoing and new projects in the pipeline. In year
2010-2011, the total production of LV, PVC & XLPE power cables was about 2.65 lakh km both
in organized & unorganized sector, amounting to an increase over previous year by 12.7%.
While PVC & XLPE power cables (3.3 kV- 33 kV), the production was about 24,200 km which
is an increase over the previous year by 6.6%.
xlix
Table 87: Strategic Analysis
About 1000 km of Power cables above 33 kV was produced in this fiscal an increase of about
33%. The estimated industry size in 2010-11 for power cables is INR 9710 Crore, an increase of
25% over the previous year 2009-2010.
4.2.8 Market Prospects
Cable industry has emerged as most consistent and fastest growing market in last five years. This
trend is expected to continue in future also. One of the best positive aspects with the cable
l
Growth Drivers 12th Five Year PlanNew Transmission Lines: 109,440 CkmNew Distribution : 1,305,000 CkmRe-Conductoring of Distribution Lines: 1,600,000 CkmReplacement of Old Transmission LinesRGGVY schemeSystem strengthening under R-APDRP Projects
Market CompetitorsJSK Industries Pvt. LimitedFinolex CablesDiamond Power Infrastructure LimitedCable Corporation of IndiaBirla GroupHavells IndiaNicco Corp.KEC International (RPG Group)Khetan Group of IndustriesKEI Wires & CablesParamount CablesSterlite Technologies Limited
Prospective Clients Central Transmission UtilityState Transmission UtilitiesExisting & forthcoming private distribution companiesEPC companiesMajor industries e.g. Petrochemicals, Mining, Steel/Metallurgical, Ship building, Engineering, Cement, Railway, Defense
Entry Opportunity Very few dominant playersUnorganized sector
Various local & regional manufacturers
Business RiskFluctuating raw material pricesPricing issue specially with Govt. clientsIndustry is highly dependent and driven by growth in power sector
Figure 77: Cable Industry: Past Performance and Expected Market Size
industry is that all three verticals of power sector i.e. generation, transmission and distribution
are the demand drivers for cable industry.
Source: IEEMA
In the 11th Plan cable industry has grown at a CAGR of 14.5%. By the end of 12 th Plan, CEA has
envisaged this market size of INR 37,000 Crore.
Source: IEEMA
While being optimistic, this industry is expected to grow up to the size of INR 38,394 Crore.
li
2007-08 2008-09 2009-10 2010-11 2011-12 2012-13 2013-14 2014-15 2015-16 2016-170
5,000
10,000
15,000
20,000
25,000
30,000
35,000
40,000
45,0001
1,3
37
11
,83
6
13
,26
8
15
,51
0
19
,49
6
22
,32
6
25
,56
7
29
,27
8
33
,52
8
38
,39
4
INR
Cro
re
CAGR:
14.5%
2007-08 2008-09 2009-10 2010-11 2011-12 2012-13 2013-14 2014-15 2015-16 2016-170
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
4,7
03 5
,70
4
5,7
16
5,6
70
5,9
14
6,2
63
6,6
32
7,0
23
7,4
37
7,8
75
INR
Cro
re
Figure 78: Conductor Industry: Past Performance and Expected Market Size
Conductor industry has not witnessed a good growth rate over last five years. CAGR in 11 th Plan
has been 5.9% with fluctuating performance.
Major users of power cables are
broadly classified into:
Power sector: Central, State and
Private electricity utilities
Major industries like:
Petrochemicals, Mining,
Steel/Metallurgical, Ship building,
Engineering, Cement, Railway,
Defense etc.
Many overseas cable companies are looking at Indian market as the upcoming market for HV &
EHV cables. Considering the strong domestic demand for cables in the power sector, overseas
cable manufacturing giants have entered into market through joint ventures with Indian cable
manufacturers for manufacturing EHV cables and special types of cables.
Major imports of HV/EHV cables are from Thailand, China, Germany, Switzerland and Korea
whereas export destinations are UK, UAE, Afghanistan, Nigeria, Ethiopia and Oman.
4.3 Transmission Tower
The electric power system can be divided into transmission, sub-transmission, and distribution
systems. With operating voltages less than 33 kV, the distribution system carries energy from the
local substation to individual households, using both overhead and underground lines.
Table 88: Voltage Segmentation of Power System
Generation 11kV, 15.5kV, 22kV etc.Transmission Transmission Lines HVAC: 765kV, 400kV, 220kV; HVDC: 500kV, 800 kV Sub-Transmission lines 132kV, 110kV, 66kVDistribution 33kV, 22kV, 11kV, 6.6kV, 440 Volts, 220Volts
lii
2006-07 2007-08 2008-09 2009-10 2010-110
500
1,000
1,500
2,000
2,500
3,000
3,500
1,723
2,049
3,126
2,021
2,515
INR
Cror
e
Source: Ministry of Commerce
Figure 79: Cable & Conductor: Export Trend
With operating voltages of 66 kV, 132 kV
and up to 220 kV the sub-transmission
system distributes energy within an entire
district and regularly uses overhead lines.
With operating voltage exceeding 220
kV, the transmission system interconnects
generating stations and large substations
located close to load centers by using
overhead lines.
4.3.1 Types of Transmission Tower
Overhead transmission lines distribute the
majority of the electric energy in the
system. A typical HVAC line has three phase conductors to carry the current and transport the
energy, and two grounded shield conductors to protect the line from direct lightning strikes. The
usually bare conductors are insulated from the supporting towers by insulators attached to
grounded towers or poles. Lower-voltage lines use post insulators, while the high-voltage lines
are built with insulator chains or long-rod composite insulators. The normal distance between the
supporting towers is a few hundred feet. Transmission lines are subject to environmental
adversities, including wide variations of temperature, high winds, and ice and snow deposits.
Typically designed to withstand environmental stresses occurring once every 50–100 years, lines
are intended to operate safely in adverse conditions.
A distinction is made between the anchor towers and the intermediate towers of a power
transmission line. The rigid and strong construction of the anchoring towers is intended to
withstand considerable stresses caused by tension in the lines. Anchor towers are installed at the
beginning and end of a power transmission line, at turns, and at points where the line passes over
water or through mountains. Intermediate towers are not as strongly constructed, serving mainly
to support the power lines and cables along straight sections.
liii
Figure 80: Transmission Tower
The transmission towers are usually made from steel and galvanized steels. Aluminum is also used as construction material for transmission lines. Type of
the transmission towers used in a circuit depends mainly
on following factors.
Working voltage level
Amount of power
Wind speed profile in the zone
Physical environment
Availability of RoW (Right of Way)
Waist Type Tower
This is the most common type of transmission tower. It's used for voltages ranging from 110 to
735 kV. Because they're easily assembled, these towers are suitable for power lines that cross
very uneven terrain. But this type of tower requires large RoW for single circuit.
Double Circuit Tower
Both tubular and lattice steel towers can be designed so as to support either one or two circuits of
electrical current. Double-circuit towers hold the different
conductors stacked atop one another, while in single-
circuit towers the conductors are lined up horizontally.
This small-footprint tower is used for voltages ranging
from 110 to 315 kV. Its height ranges from 25 to 60
meters.
Steel Tubular Pole
Featuring a streamlined, aesthetic shape, this structure is
less massive than other towers, allowing it to blend easily
into the environment. Therefore, it's being used more and
liv
Figure 81: Waist Type Tower
Figure 82: Double Circuit Tower
Figure 83: Steel Tubular Pole
more in urban centre. Measuring between 27 and 45 meters in height, it's suitable for voltages
ranging from 110 to 315 kV.
Guyed-V Tower
This tower is designed for voltages ranging from 230 to 735 kV. It is more economical than the
double-circuit and waist-type towers. These towers have also been used by the transmission companies in cases where more space is available. These are simple, easy and cheaper to install. The guyed towers also require less time for installation. The main disadvantage is that these towers require more space due to presence of guy wires.
4.3.2 Competitor Analysis
Table 89: Kalpataru Power Transmission Limited
Year of Establishment 1981
Nature of Business Manufacturing EPC
Products/Services Tower Manufacturing Commissioning and Testing of Transmission Lines & Substation Infrastructure Development (Railways, Oil & Gas, Construction)
Leading Product/Service Tower Manufacturing Commissioning and Testing of Transmission Lines & Substation
Infrastructure Mfg unit: 2Production Capacity Tower Manufacturing: 100,000 tpaAnnual Turnover(2010-2011 and 2009-10)
INR 2,874 Crore and INR 2,678 Crore
Global Footprints
Across 31 countries such as: Ethiopia, Algeria, Vietnam, UAE, South Africa, Nigeria, Kenya, Kuwait, Philippines, Syria, Mexico, Thailand, Abu Dhabi, USA, Canada, Peru
Indian Clientele PGCIL, GETCO, Essar Power, MSETCL, TNEB, WBSEB, ADANI PowerCertification ISO 9001-14001
Table 90: IVRCL
Year of Establishment 1987
lv
Figure 84: Guyed-V Tower
Nature of Business Manufacturing
Products/Services Tower Manufacturing Commissioning and Testing of Transmission Lines & Substation Infrastructure Development (Railways, Oil & Gas, Construction)
Leading Product/Service Tower Manufacturing Commissioning and Testing of Transmission Lines & Substation
Infrastructure Mfg unit: 1Production Capacity Tower Manufacturing: 36,000 tpaAnnual Turnover(2010-2011 and 2009-10)
INR 5,659 Crore and INR 5,494 Crore
Global Footprints Across 45 countries world wide
Indian Clientele
Government utilities such as: BHEL, NTPC, ONGC, NPCIL, BPCL, IOCL, PGCIL, AAI, Indian Railways, Ministry of Defense, Konkan Railway, MSETCL, HVPNL
Private companies such as: BITS, DLF, Telco Construction Equipment Company Ltd, Tata Projects Ltd, JSPL, Tata Docomo, Tata Cummins
Certification ISO 9001:2000, IS
Table 91: KEC International
Year of Establishment 1945
Nature of Business Manufacturing EPC Services
Products/Services
Power Cable Tower Manufacturing Commissioning and Testing of Transmission Lines & Substation Infrastructure Development (Railways, Oil & Gas, Construction)
Leading Product/Service Tower Manufacturing Power Cable Commissioning and Testing of Transmission Lines & Substation
Infrastructure Mfg unit: 6 (India) + 2 (Abroad)Production Capacity Tower Manufacturing: 311,000 tpaAnnual Turnover(2010-2011 and 2009-10)
INR 4,057 Crore and INR 3,923 Crore
Global Footprints
Across 40 countries spread over Africa, Middle East, Central Asia, North America;
Manufacturing in Brazil and Mexico
Indian Clientele Government utilities such as: WBSEDCL, MSEDCL, PGCIL, NHPC,
MAHATRANSCO, J&K Power Development Various private companies
Certification ISO 9001:2000, CPRI, ISO, BIS
lvi
Table 92: Diamond Power Infrastructure Limited
Year of Establishment 1970
Nature of Business Manufacturing EPC
Products/Services
Tower Manufacturing Transformer Manufacturing Commissioning and Testing of Transmission Lines & Substation Power Conductor and Cable Manufacturing
Leading Product/Service Commissioning and Testing of Transmission Lines & Substation Power Conductor and Cable Manufacturing
Production Capacity
Tower Manufacturing: 48,000 tpa LV Cable: 34,300 kmpa HV Cable: 5,800 kmpa EHV Cable: 2,000 kmpa
Annual Turnover(2010-2011 and 2009-10)
INR 1285 Crore and INR 735 Crore
Global Footprints New-Zealand, Zimbabwe, Tanzania, Sri Lanka, Tajikistan, Bangladesh, Israel
Indian Clientele
Various SEBs of states such as: Assam, Gujarat, Haryana, Rajasthan, Karnataka, MP, Maharashtra, Punjab, UP, West Bengal;
PSUs: PGCIL, BHEL, BHEL, NTPC, PGCIL, SAIL Private companies such as: ABB, L&T Ltd, EMCO, CGL, Enercon, Suzlon
Energy, Kalpataru Power Transmission, Jindal, Essar PowerCertification ISO 9001-2008, ERDA, CPRI, BIS, BSI, DIN, IEC, ASTM
Table 93: Jyoti Structures Limited
Year of Establishment 1974
Nature of Business Manufacturing EPC
Products/Services Tower Manufacturing Conductor Manufacturing Commissioning and Testing of Transmission Lines & Substation
Infrastructure Mfg unit: 2 (India) + 1 (Dubai)
Production Capacity Tower Manufacturing: 110,000 tpa (India) + 50,000 tpa (Dubai) Conductor Manufacturing: 2,500 ckm per annum
Annual Turnover(2011-2012 and 2010-11)
INR 2,647 Crore and INR 2,460 Crore
Global Footprints
Presence across 40 countries such as: Australia, Chile, Canada, Ethiopia, Egypt, France, Iran, Indonesia, Malaysia, Namibia, Nigeria, Oman, Philippines, Peru, Qatar, South Africa, Sri Lanka, Thailand, Tunisia, UAE, Uganda etc.
Indian Clientele Various Transcos in country PSUs: PGCIL & NTPC
Certification ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007
lvii
Table 94: Gammon India Ltd
Year of Establishment 1984
Nature of Business
Manufacturing EPC Turnkey Projects Engineering & Design
Products/Services Tower Manufacturing Commissioning and Testing of Transmission Lines & Substation Infrastructure
Infrastructure Mfg unit: 3Production Capacity Tower Manufacturing: 110,000 tpaAnnual Turnover(2010-2011 and 2009-10)
INR 5,636 Crore and INR 4,534 Crore
Global Footprints Afghanistan, Kenya, Afghanistan, Nigeria, Ethiopia, Ghana, Sri Lanka, Oman
Indian Clientele
Various state such as: Govt. of Andhra Pradesh, Govt. of West Bengal DMRC, GAIL, PGCIL, NTPC, NHPC, NPCIL, NHAI, SJVNL Private companies such as: Godrej Properties, Municipal Corporation of
Amritsar Certification ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007
Table 95: Unitech Power Transmission Ltd
Year of Establishment 1972
Nature of Business Manufacturing EPC
Products/Services Tower Manufacturing Commissioning and Testing of T&D Lines & Substations
Infrastructure Mfg unit: 1Production Capacity Tower Manufacturing: 35,000 tpaAverage Annual Turnover INR 1,500 CroreGlobal Footprints Nepal, Korea, Sudan, Finland, Spain, France, Libya, Germany,
Indian Clientele
Various SEBs across India PSUs: PGCIL, NTPC Private companies such as: Tata Power, Fortrum, Hyundai, Inabensa, Alstom,
SeimensCertification ISO 9001:2008, ISO 14001:2004
Table 96: Aster Private Ltd
Year of Establishment 1998
Nature of Business Manufacturing EPC
Products/Services Tower Manufacturing Commissioning and Testing of Transmission Lines & Substation
Infrastructure Mfg unit: 6
lviii
Production Capacity Tower Manufacturing: 142,320 tpa
Global Footprints
Afghanistan, Bahrain, Burkina Faso, Cambodia, Congo, Ethiopia, Ghana, India, Kenya, Madagascar, Mauritius, Nepal, Cameroon, Nigeria, Oman, Qatar, Rwanda, Saudi Arabia, Seychelles, Sri Lanka, Sudan, Tanzania, UAE, Yemen
Indian Clientele
Various State Transcos such as: MSETCL, APTRANSCO, GETCO, MSEDCL, OPTCL, UPPTCL, KPTCL, MPPTCL, HVPTNL, KSEB, RRVPNL
PSUs: PGCIL & NTPC Private players such as: Alstom, Siemens, ABB, TATA, Lanco, L&T, Sterlite,
KSK, JSPL, Vijay Electricals, EMC Limited, ECI, Deepak CablesCertification ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007
Table 97: Man Structurals Pvt. Ltd
Year of Establishment 1960
Nature of Business Manufacturing EPC
Products/Services Tower Manufacturing Commissioning and Testing of Transmission Lines & Substation Infrastructure Development (Railways, Construction)
Leading Product/Service Tower Manufacturing Commissioning and Testing of Transmission Lines & Substation
Infrastructure Mfg unit: 3
Indian Clientele
Government utilities such as: PGCIL, RRVPNL, KPTCL, GEB, OSEB, HPEB;
Other players such as Kalindee Rail Nirman, SIEMENS Ltd, KEC International, Hindustan Zinc Ltd, Tata Projects Ltd, Techno Electric & engineers Co. Ltd, Nepal Electricity Supply Co.
Certification ISO 9001:2000
4.3.3 Financial Analysis
Table 98: Competitor Performance
Sr No Company Name2010-2011 (Figures in Crore)
ATO (V)
Op Ex (W)
Raw Mat. Cost (X) EBIDTA (Y) PAT (Z)
INR INR INR X/W INR Y/V INR Z/V
1Kalpataru Power Transmission Ltd
2,874 2,497 1,277 51% 377 13% 149 5%
2 IVRCL 5,659 NA NA NA 523 9% 158 3%3 KEC International 4,057 3,593 2,172 60% 463 11% 275 7%
4Diamond Power Infrastructure Ltd
1,285 1,149 1,098 95% 159 12% 98 8%
lix
5 Jyoti Limited 2,647 2,376 1,431 60% 271 10% 612.3%
6 Gammon India Ltd+ 5,636 5,297 1,488 28% 339 6% 1843.3%
7 SPML 1,219 1104 420 38% 115 10% 25 2%8 ICSA 1,406 1,115 1,011 90% 291 20% 118 8%
+Revenue from all businesses
4.3.4 Industry Performance
Table 99: Performance of Transmission Line Industry
Name of the EquipmentWeight (%)
Industry Size (INR Crore)
YoY % Change
2010-11 2008-09 2009-10 2010-11 2011-12Transmission Lines 23.4 14,070 13.5 9.2 4 -0.8Transmission Line Towers 12.6 6,600 6.5 19 6.8 -5.2Conductors 10.8 5,670 21.3 0.2 -0.8 4.3Source: IEEMA
This important segment (having a weight of 23.4 per cent in the total industry in FY11) has been
on a downturn over the past four years.
lx
Table 100: Strategic Analysis
Growth in this industry has consistently decreasing from 13.5 per cent in FY09 to 4 per cent in
FY11. It has further declined to -5.2% in FY12. Transmission line manufacturing sector has its
own issues. Some of them are as under.
Fiscal performance of state transcos and discoms continues to be poor with little or no funds
for planned investment.
Poor credit-worthiness of state utilities is leading to lack of payment security for private
investors.
Procedural delays for both public & private projects and long time taken for the entire
bidding process.
Lack of coordination in transmission planning and implementation activity.
lxi
Growth Drivers 12th Five Year PlanNew Transmission Lines: 109,440 CkmNew Distribution : 1,305,000 CkmInterregional Transmission Capacity: 37,000 MWInvestment of INR 180,000 in 12th PlanRGGVY and R-APDRP Projects
Market CompetitorsKalpataru Power Transmission LtdIVRCLKEC InternationalDiamond Power Infrastructure LimitedJyoti Structures LimitedGammon India LtdUnitech Power Transmission LtdAster Private LtdMan Structurals Pvt. Ltd
Prospective Clients Central Transmission UtilityState Transmission UtilitiesPrivate transmission and distribution companiesEPC players
Entry Opportunity Increasing voltage level for bulk transmission and hence EHV tower testing facilityGood starting as a medium scale manufacturer
Prospects of good business in steel tubular poles because of less RoW requirement
Business RiskFluctuating raw material pricesPricing issue specially with Govt. clientsIndustry is highly dependent and driven by growth in power sectorLack of domestic testing facilities for EHV towers
Commercial conditions such as unrealistic terms of payment, non-availability of price
variation clauses often lead imbalance in price levels.
The decline in growth of tower industry has led the manufacturing facilities to operate on 67%
capacity utilization only.
4.3.5 Market Prospects
Tower manufacturing capacity is a mature enough industry in the country. It has been showing
fluctuating performance for last five years. Still future of this segment is bright due to adoption
of higher voltage for power transmission.
Source: IEEMA
This factor is the main growth driver of this industry which needs more testing facility of
transmission towers. Apart from it, PGCIL’s aggressive planning to invest INR 100,000 Crore
for line addition in 12th Plan is being considered as leading demand driver. It is worth to note that
PGCIL’s investment during 11th Plan was INR 55,000 Crore while in the 12th Plan this amount
would be around INR 100,000 Crore.
In the 11th Plan this industry has grown at a CAGR of 6.4%. By the end of 12 th Plan, CEA has
envisaged this market size of INR 18,038 Crore. While looking at the past trend, this industry is
expected to grow up to the size of INR 8,545 Crore in next five years.
4.4 Switchgear & Control Instruments
lxii
2007-08 2008-09 2009-10 2010-11 2011-12 2012-13 2013-14 2014-15 2015-16 2016-170
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
4,8
76
5,1
93 6,1
80
6,6
00
6,2
57
6,6
59
7,0
87
7,5
43
8,0
28
8,5
45
INR
Cro
re
CAGR: 6.4%
Figure 85: Tower Industry: Past Performance and Expected Market Size
Figure 86: Switchgear: Circuit Breaker
Switchgears are integral component at every switching point in power systems. Basic function
of switchgear in power system is the measurement
and protection from short circuits and overload fault
currents while simultaneously providing service
continuously to unaffected circuits while avoiding the
creation of an electrical hazard. Switchgear power
system also provides important isolation of various
circuits from different power supplies for safety issues.
4.4.1 Constituents of Switchgear
There are many different types and classifications
of switchgear power systems to meet a variety of
different needs. On the basis of different application,
theses are classified accordingly.
Oil Circuit Breaker (OCB)
The oil in OCBs serves two purposes. It insulates
between the phases and between the phases & ground,
and it provides the medium for the extinguishing of
the arc. When electric arc is drawn under oil, the arc vaporizes the oil and creates a large bubble
that surrounds the arc. The gas inside the bubble is around 80% hydrogen, which impairs
ionization. The decomposition of oil into gas requires energy that comes from the heat generated
by the arc. The oil surrounding the bubble conducts the heat away from the arc and thus also
contributes to deionization of the arc. Main disadvantage of the oil circuit breakers is the
flammability of the oil, and the maintenance necessary to keep the oil in good condition (i.e.
changing and purifying the oil).
Vacuum Circuit Breaker (VCB)
In this breaker, vacuum is being used as the arc quenching
medium. Vacuum offers highest insulating strength; it has
far superior arc quenching properties than any other
lxiii
Figure 87: Oil Circuit Breaker
Figure 88: Voltage Circuit Breaker
medium. When contacts of a breaker are opened in vacuum, the interruption occurs at first
current zero with dielectric strength between the contacts building up at a rate thousands of times
that obtained with other circuit breakers. It consists of fixed contact, moving contact and arc
shield mounted inside a vacuum chamber. The movable member is connected to the control
mechanism by stainless steel bellows .This enables the permanent sealing of the vacuum
chamber so as to eliminate the possibility of leak. A glass vessel or ceramic vessel is used as the
outer insulating body. The arc shield prevents the deterioration of the internal dielectric strength
by preventing metallic vapors falling on the inside surface of the outer insulating cover.
VCB are used for outdoor applications ranging from 22 kV to 66 kV. These are suitable for
majority of applications in rural area.
Gas Circuit Breaker
In this circuit breaker, Sulphar Hexafluoride (SF6) gas is used as the arc quenching medium.
The SF6 gas is an electro negative gas and has a strong tendency to absorb free electrons. The
contacts of the breaker are opened in a high pressure flow of SF6 gas and an arc is struck between
them. The conducting free electrons in the arc are rapidly captured by the gas to form relatively
immobile negative ions. This loss of conducting electrons
in the arc quickly builds up enough insulation strength to
extinguish the arc. The SF6 circuit breakers are very
effective for high power and high voltage service.
Advantages of Gas Circuit Breaker
Due to superior arc quenching property of SF6, such
breakers have very short arcing time
Dielectric strength of SF6 gas is 2 to 3 times that of air, such breakers can interrupt much
larger currents
Gives noiseless operation due to its closed gas circuit
Closed gas enclosure keeps the interior dry so that there is no moisture problem
There is no risk of fire as SF6 is non inflammable
There are no carbon deposits
Low maintenance cost, light foundation requirements and minimum auxiliary equipment
lxiv
Figure 89: Gas Circuit Breaker
Disadvantages of Gas Circuit Breaker
High cost of SF6
SF6 gas has to be reconditioned after every operation of the breaker, additional equipment is
required for this purpose
Instrument Transformers
Instrument transformers are used for measurement and protective application, together with
equipment such as meters and relays. It is also a part of switchgear family. Their role in electrical
systems is of primary importance as they are a means of "stepping down" the current or voltage
of a system to measurable values, such as 5A or 1A in the case of a current transformers and
110V or 100V in the case of a voltage transformer. This offers the advantage that measurement
and protective equipment can be standardized on a few values of current and voltage. Current
transformers, together with Voltage Transformers (VT) (or Potential Transformers (PT)), are
known as instrument transformers.
Current Transformers
When current in a circuit is too high to directly
apply to measuring instruments, a current
transformer produces a reduced current accurately
proportional to the current in the circuit, which can
be conveniently connected to measuring and
recording instruments. A current transformer also
isolates the measuring instruments from what may
be very high voltage in the monitored circuit.
Current transformers are commonly used in metering and protective relays in the electrical
power industry.
Voltage Transformers
When voltage level of a circuit is too high to
directly apply to measuring instruments, a voltage
lxv
Figure 90: Current Transformer
Figure 91: Voltage Transformer
transformer produces a stepped down voltage level accurately proportional to the voltage level of
the circuit, which can be conveniently connected to measuring and recording instruments. A
voltage transformer also isolates the measuring instruments from what may be very high voltage
in the monitored circuit. Voltage (Potential) transformers are commonly used in metering and
protective relays in the electrical power industry.
4.4.2 Competitor Analysis
Table 101: Bharat Heavy Electricals Limited (BHEL)
Year of Establishment 1964
Nature of Business
Manufacturing EPC Oil & Gas R&D
Products/Services
Power Transformers Switchgear BTG Sets BOP
Leading Product/Service Power Transformers BTG Sets Switchgear
Infrastructure Mfg unit: 15 Business office: 15 Service centre: 8
Annual Turnover(20010-11 and 2009-10)
INR 43,337 Crore and INR 34,154 Crore
Technology Sourcing
Siemens AG Germany Germany ABB Switzerland General Electric USA
Global Footprints More than 70 countries
Indian Clientele Power Utilities, Oil & Gas Sector, Mining Sector, Indian Railways, EPC
Contractors, Cement Industry, Steel IndustryCertification ASME, API
Table 102: Siemens India Limited
Year of Establishment 1956-57 (In India)
Nature of Business
Manufacturing EPC Services R&D
Products/Services Power Transformers
lxvi
Switchgear Network Protection & Control System Automation & Robotics Electric Motors & Alternators Substation Erection Consumer Products
Leading Product/Service Power Transformers Switchgear System Automation
Infrastructure Mfg unit: 8 Sales offices: 19 R&D center: 10
Annual Turnover(20010-11 and 2009-10)
INR 12,253 Crore and INR 9,477 Crore
Technology Sourcing Indigenous technologyGlobal Footprints More than 190 countries
Indian Clientele Power Utilities, Oil & Gas Sector, Mining Sector, Indian Railways, EPC
Contractors, Cement Industry, Steel IndustryCertification IEC, ANSI, IEEE, CPRI, ISO 9001, ISO 14001, OHSAS 18001
Table 103: ABB Limited
Year of Establishment 1949 (In India)
Nature of Business
Manufacturing EPC Services R&D
Products/Services
Power Transformers Switchgear Network Protection & Control System Automation & Robotics Electric Motors & Alternators Substation Erection Consumer Products
Leading Product/Service Power Transformers Switchgear System Automation
Infrastructure
Mfg unit: 12 Marketing offices: 23 Service center: 8 Logistic warehouse: 3 Training centers: 4 Power & Automation engineering centers: 2 Channel partners: 550
Annual Turnover(20010-11 and 2009-10)
INR 7,693 Crore and INR 6,372 Crore
Technology Sourcing Indigenous technology
lxvii
Global Footprints More than 100 countries
Indian Clientele Power Utilities, Oil & Gas Sector, Mining Sector, Indian Railways, EPC
Contractors, Cement Industry, Steel Industry
CertificationIEC, ANSI, IS, KEMA, BS, CSA, UL, ATEX, CE, CPRI, ISO 9001, ISO 14001, OHSAS 18001
Table 104: Crompton Greaves Limited
Year of Establishment 1937 (In India)
Nature of Business
Manufacturing EPC Services R&D
Products/Services
Power Transformers Switchgear Network Protection & Control System Automation & Robotics Electric Motors & Alternators Substation Erection Consumer Products
Leading Product/Service
Power Transformers Switchgear Rotating Machines System Automation
Infrastructure Mfg unit: 20 More than 30 communication points in India
Annual Turnover(20010-11 and 2009-10)
INR 6,276 Crore and INR 5,368 Crore
Technology Sourcing For SLIM Transformers with Dupont’s Nomex Thermal Insulating
Technology
Global Footprints Indonesia, Belgium, Hungary, Canada, USA, UK, Ireland, Netherland,
Sweden, France, UAE, China, Australia, New Zealand, Curacao
Indian Clientele Power Utilities, Oil & Gas Sector, Mining Sector, Indian Railways, EPC
Contractors, Cement Industry, Steel Industry
CertificationISO 9001, ISO 14001, OHSAS 18001, CPRI, IEC, ANSI, IS, KEMA, BS, CSA, UL, ATEX, CE
Table 105: Alstom (Areva) T&D India Limited
Year of Establishment 1911 (In India)
Nature of Business
Manufacturing EPC Services R&D
Products/Services Power Transformers Gas Insulated Switchgear
lxviii
Switchgear Network Protection & Control Electric Motors & Alternators Substation Erection
Leading Product/Service Power Transformers Switchgear System Automation
Infrastructure
Mfg unit: 8 Sales offices: 25 R&D center: 4 Engineering center: 2 Channel partners: 500
Annual Turnover(20010-11)
INR 4,037 Crore
Technology Sourcing Indigenous technologyGlobal Footprints More than 100 countries
Indian Clientele Power Utilities, Oil & Gas Sector, Mining Sector, Indian Railways, EPC
Contractors, Cement Industry, Steel IndustryCertification IEC, ANSI, IEEE, ISO 9001, ISO 14001, OHSAS 18001
Table 106: Biecco Lawrie Limited
Year of Establishment 1943
Nature of Business Manufacturing Turnkey Projects Electrical Repairs
Products/Services Switchgear Electronics & Control (Relays Division)
Leading Product/Service SwitchgearAnnual Turnover(2009-10)
INR 66 Crore
Technology Sourcing Indigenous
Indian Clientele Power Utilities, Indian Railways, EPC Contractors, Cement Industry, Steel
IndustryCertification ISO 9001-2008, ISO-14000
Table 107: Jyoti Limited
Year of Establishment 1943
Nature of Business
Manufacturing EPC Services R&D
Products/Services Switchgear Electronics & Control (Relays Division) Rotating Electrical Machines
lxix
Hydel System, Electrical Pump
Leading Product/Service Switchgear Rotating Electrical Machines
Annual Turnover(20010-11 and 2009-10)
INR 395 Crore and INR299 Crore
Technology Sourcing Toshiba Corporation, JapanGlobal Footprints Bhutan, Oman, Nepal,
Indian Clientele Power Utilities, Oil & Gas Sector, Mining Sector, Indian Railways, EPC
Contractors, Cement Industry, Fertilizer Industry, Steel IndustryCertification ISO 9001
Table 108: Vishal Transformers & Switchgears (P) Ltd
Year of Establishment 1970Nature of Business Manufacturing
Products/Services
Instrument Transformers Auxiliary Transformers Distribution Transformers Special Purpose CT & VT Metering Cubicle
Leading Product/Service Instrument TransformersInfrastructure Mfg unit: 3Technology Sourcing Indigenous
Indian Clientele Various SEBs of ctates such as: UP, Uttarakhand, Rajasthan, Punjab, Haryana Entities such as: BHEL, Siemens, ABB, CGL, ALSTOM, L&T, CGL,
Nagarjuna Construction Company, Indian Railways, Subhash ProjectsCertification ISO 9001-2008, IS
Table 109: Heptacare Power Industries Pvt. Limited
Year of Establishment 1994Nature of Business ManufacturingProducts/Services Instrument TransformersLeading Product/Service Instrument TransformersInfrastructure Mfg unit: 1Technology Sourcing Indigenous
Indian Clientele
Various SEBs of states such as: UP, UttraKhand, Rajasthan, Punjab, Haryana, J&K, HP, Chhattisgarh, Odissa
Power utilities such as: Areva, ABB, BBMB, BHEL, CGL, INRCL International Ltd, KEC International, Nagarjuna Construction
Certification ISO 9001-2000, IEC,IS
Table 110: Hivoltrans Electricals Pvt. Ltd
Year of Establishment 1985
lxx
Nature of Business Manufacturing
Products/Services Instrument Transformers Isolating Transformers HV Testing Transformers
Leading Product/Service Instrument TransformersInfrastructure Mfg unit: 1Technology Sourcing Indigenous
Indian Clientele
Government utilities such as: MSEB, ASEB, MPSEB, GEB, NEEPCO, BBMB, APSEB, RSEB, GRIDCO, WBSEB
Others such as: ABB, ALSTOM, CGL, Bharat Bijlee, EMCO, Essar, GAIL, IOCL, Railways, KRIBHCO, Jyoti Enterprises, Suzlon Energy, Torrent Power, UltraTech
Certification ISO 9001:2000, IS
Table 111: Kappa Electricals
Year of Establishment 1966Nature of Business Manufacturing
Products/Services Instrument Transformers Control & Auto Transformers Relays, Switches and Fuses
Products/Services Instrument TransformersTechnology Sourcing IndigenousGlobal Footprint Indian Subcontinent, East Asia, Middle East and South East Asia
Indian Clientele Various SEBs Private Utilities Industrial Consumers
Certification ISO 9001:1994, BS, IEC, AS, DIN, KEMA
4.4.3 Financial Analysis
Table 112: Competitor Performance
Sr No Company Name2010-2011 (Figures in Crore)
ATO (V)
Op Ex (W)
Raw Mat. Cost (X) EBIDTA (Y) PAT (Z)
INR INR INR X/W INR Y/V INR Z/V
1 BHEL 43,337 33,856 23,209 69% 9,538 22%6,01
114%
2Siemens India Limited
12,253 3,895 2,162 56% 1,409 12% 868 7%
3 ABB Limited 7,693 7,126 5,518 77% 393 5% 185 2%4 Crompton Greaves 6,276 5,018 2,828 56% 937 15% 694 11%
lxxi
Limited
5Alstom (Areva) T&D India Limited*
4,037 3,718 2,875 77% 319 8% 65 2%
6 Biecco Lawrie* 66 62 39 63% 4 6% 2 3%7 Jyoti Limited 395 341 270 80% 54 14% 18 5%
*Figure for FY10
4.4.4 Industry Performance
The switchgear industry in India manufactures the entire range of circuit breakers from bulk oil,
minimum oil, and air blast, vacuum; to Sulphar Hexafluoride (SF6) as per standard
specifications. There are a few leading circuit
breaker manufacturers in the country. Rests are
medium scale manufacturers. In the field of instrument transformer also there are eight to ten
players who are majorly involved in manufacturing of instrument transformers at EHV level
only. Other players manufacture these components at sub-transmission and distribution voltage
level. At the medium and low voltage level, it is an unorganized market and regional players are
involved in doing business in their area of reach.
After two consecutive years of double-digit
growth, the switchgear industry had to contend
with a 2.4 per cent fall in FY12. In FY11, the
segment had grown by 21.2% that had come over
and above a 14.5% growth in FY10. It is
estimated that the size of the switchgear market,
(not including domestic switches), was around
INR 9,100 Crore in 2010-11.
Table 113: Performance of Switchgear Industry
Name of the EquipmentWeight (%)
Industry Size (INR Crore)
YoY % Change
2011-11 2008-09 2009-10 2010-11 2011-12Switchgear 15.1 9,100 0 14.5 21.2 -2.4Power Contactors 2.6 1,000 -17.8 41 28.7 -10.4LT Circuit Breakers 3.6 1,360 -1 29.4 19.5 -5.8MCBs 2.8 1,050 9.7 23 7.7 15.5
lxxii
2006-07 2007-08 2008-09 2009-10 2010-110
200
400
600
800
1,000
1,200
705
614
751813
1,105
INR
Cror
e
Source: Ministry of Commerce
Figure 92: Export of Switchgear Instruments
S/F and F/S Units 0.5 207 -11.1 5.3 3.8 -4.3HT Circuit Breakers 5.6 2,140 2.4 -5.8 28.4 -5.8Source: IEEMA
4.4.5 Demand Segments
Utilities: HV and EHV demand majorly comes from the utilities. India's power generation
capacity of 2,300 MW in 1950 expanded to 200,000 MW in 2012. With the 12th Plan the capacity
is expected to increase by around 75,000 MW. The Government is focusing on increasing the
penetration of power supply in villages. Schemes like APDRP and RGGVY are providing an
excellent opportunity for the LV and MV switchgear market with about 10-15% villages yet to
be electrified.
Industrial Segment: An increase in process automation levels observed which support push-
buttons, contactors and switching relays, as well as the protection relays market, which finds
application extensively for motor control. Investment in new infrastructural setup is set to
increase the market for Insulated Switchgears, Ring Main Units, Molded Case Circuit Breakers,
Air Circuit Breakers and Control & Relay Panels.
lxxiii
Table 114: Strategic Analysis
Power Plant Modernization and Refurbishment: As in other parts of the world, numerous
power plants in India are nearing the end of their services plan, thus requiring overhauling and
modernization. This includes replacement of existing transformers and LV, MV and HV
switchgear, which are on average over 30 years old. Power plant modernization and
refurbishment is expected to additionally support growth of the switchgear market.
lxxiv
Growth Drivers 12th Five Year PlanFocus on RGGVY schemesPower Plant Modernization and RefurbishmentMore focus on higher transmission and High Voltage Distribution SystemIntroduction of gas insulated switchgears which require less spaceIncreasing system automation
Market CompetitorsSiemens India LimitedABB LimitedCrompton Greaves LimitedBHELSchneider ElectricPentagon Switch GearBiecco Lawrie LimitedJyoti LimitedPower Protection
Prospective Clients Central Transmission UtilityState Transmission UtilitiesExisting & forthcoming private distribution companiesEPC companiesMajor industries e.g. Petrochemicals, Mining, Steel/Metallurgical, Ship building, Engineering, Cement, Railway, Defense
Entry Opportunity Around 15-20 leading manufacturers in countryPresent market is dominated by multinational players, therefore good opportunity for new playersThe switchgear industry has traditionally been low on technology, but with changing times automation has ushered in newer concepts such as soft starters, intelligent relays, compact intelligent switchgear and energy efficient switchgear
Business Risk & IssuesRequires good technological partnership or in house R&D and testing facilitiesCompetitive pricingVolatile price of raw material
Alternative Energy Sources: The India Government continues to research and invest in
renewable energy sources such as wind, solar-thermal and hydroelectric power. The increase in
investment in alternative energy sources is also expected to support market growth, as LV and
MV switchgear products are required for general protection as well as switching. The MCCB
and MCB markets are expected to benefit considerably from alternative energy expansion.
4.4.6 Market Prospects
Switchgear industry has been growing for last years at a CAGR of 7.9%. Only in FY 2011-12 it
witnessed negative growth. Still future of this product is good enough due to R&M plans of old
power plants. This factor is the main growth driver of this industry.
Source: IEEMA
By the end of 12th Plan, CEA has envisaged this market size of INR 22,000 Crore. While looking
at the past trend, this industry is expected to grow up to the size of INR 12,977 Crore.
4.5 Transformer
A transformer is a static machine used for
transforming voltage level from one circuit to another
circuit without changing frequency. By using a step
lxxv
2007-08 2008-09 2009-10 2010-11 2011-12 2012-13 2013-14 2014-15 2015-16 2016-170
2,000
4,000
6,000
8,000
10,000
12,000
14,000
6,5
57
6,5
57
7,5
08 9
,10
0
8,8
82
9,5
81
10
,33
6
11
,15
1
12
,03
0
12
,97
7
CAGR: 7.9%
Figure 93: Switchgear Industry: Past Performance and Expected Market Size
Figure 94: Transformer
up transformer at the sending end of the power system network we transmit the power at high
voltage. This power may not be distributed to the consumers directly and must be stepped down
to the desired level at the receiving end with help of step down transformer.
Table 115: Types of Transformer
Power Transformer Distribution Transformer
Instrument Transformer
Rating Above 1 MVA, 33 kV Up to 1 MVA, 11 kV 440 Volts to 1200 kV
Application Generation, Transmission, Sub-transmission and Distribution
Distribution Measuring & Protection
Types Oil filled & Dry Type Oil filled & Dry type Oil filled & Dry type
4.5.1 Major Components of Transformer
Windings
The conducting material used for the windings depends upon
the application, but in all cases the individual turns must be
electrically insulated from each other to ensure that the
current travels throughout every turn. Larger power
transformers operating at high voltages may be wound with
copper rectangular strip conductors insulated by oil-impregnated paper and blocks of pressboard.
Core
For efficient flux linking between the two windings, one low
reluctance magnetic path common to both of them should be
provided in the transformer. This low reluctance magnetic
path in transformer is known as core of transformer. The
main problem with transformer core is the hysteresis
and eddy current loss in transformer. Hysteresis loss in
transformer mainly depends upon its core materials. The core
steel which has under gone through the both silicon alloying and cold rolling treatments is
lxxvi
Figure 96: Core
Figure 95: Transformer Windings
commonly known as CRGOS or Cold Rolled Grain Oriented Silicon Steel. This material is now
universally used for manufacturing for transformer core.
Conservator Tank
Two main roles of conservator: whenever high
electrical stress are produces inside the transformer
due to fault then temperature raise of oil it gives
contraction effect & gases also produced inside the
main tank then it takes a path to release the pressure
via Buchholz relay to the conservator & breather
releases the gas.
Conservator tank is provided to maintain the oil level in the transformer. It is never filled with oil
up to the neck. Thermal expansion nature of the oil is kept in the view and therefore oil is filled
only up to 3/4th of conservator tank level.
Radiator
Radiators are used in a transformer to cool the
transformer oil through natural air or forced air
flowing in these radiator fins. As the transformer oil
temperature goes down due to cooling it goes to the
transformer tank from bottom, cool the windings and
gets heated, and then returns to the radiator for next
cooling. This cycle repeats as the oil flow is also natural due difference in temperature of oil on
bottom and top. In big power transformers this oil circulation is forced by oil pumps for effective
cooling. The radiator has many small fins and there are 4-10 radiator banks in a transformer
depending on capacity and make of the
transformer.
Buchholz Relay
Buchholz Relay in transformer is an oil container
housed the connecting pipe from main tank to
lxxvii
Figure 97: Conservator Tank
Figure 98: Radiator
Figure 99: Buchholz Relay
conservator tank. It has mainly two elements. The upper element consists of a float. The float is
attached to a hinge in such a way that it can move up and down depending upon the oil level in
the Buchholz Relay Container. One mercury switch is fixed on the float. The alignment of
mercury switch hence depends upon the position of the float. The lower element consists of a
baffle plate and mercury switch. This plate is fitted on a hinge just in front of the inlet (main tank
side) of Buchholz Relay in transformer in such a way that when oil enters in the relay from that
inlet in high pressure the alignment of the baffle plate along with the mercury switch attached to
it, will change. In addition to these main elements a Buchholz Relay has gas release pockets on
top. The electrical leads from both mercury switches are taken out through a molded terminal
block.
Bushings
A bushing is a hollow electrical insulator through which a
conductor may pass. The bushing is a
hollow insulating liner that fits through a hole in a wall or
metal case, allowing a conductor to pass along its centre
and connect at both ends to other equipment. The purpose
of the bushing is to keep the conductor insulated from the
surface it is passing through. Bushings are often made of
wet-process fired porcelain, and may be coated with a semi-conducting glaze to assist in
equalizing the electrical stress along the length of the bushing.
The inside of the bushing may contain paper insulation and the bushing is often filled with oil to
provide additional insulation. Bushings for medium-voltage and low-voltage apparatus may be
made of resins reinforced with paper. The use of polymer bushings for high voltage applications
is becoming more common. The largest high-voltage bushings made are usually associated
with high-voltage direct-current converters.
4.5.2 Market Analysis
Transformer is the most costly and critical component in a substation. It accounts for 10-15% of
the total cost of switchyard in a power system. The Indian transformer industry is more than five
decade old and manufactures all types of transformers. The industry enjoys a good reputation in
lxxviii
Figure 100: Bushings
terms of quality, price and delivery in the domestic as well as overseas markets even in advanced
countries. The Indian transformer industry can generally be divided into distribution
transformers, power transformers, generating transformer and other types of special transformers
for welding, traction, furnace etc.
Past Performance
Power transformers account for about 65-70% of the total transformer industry in MVA terms.
Distribution transformers account for the remaining 30-35% of the total transformer industry in
MVA terms. A transformer could either be oil filled or dry type by nature, with voltage ranging
from 1.1 kV-33 kV.
Table 116: Transformer: Domestic Demand Vs Supply
2006-07 2007-08 2008-09 2009-10 2010-11Installed manufacturing Capacity (MVA) 1,13,360 1,44,190 1,52,065 1,72,065 2,10,000Production (MVA) 90,810 1,07,723 1,22,487 1,29,049 1,68,000Total Transformer Demand (MVA) 1,39,364 1,60,129 1,83,988 2,11,402 2,42,901
The transformer industry grew by a feeble 1.2% in FY12 as against a very healthy 13.5% in
FY11. While power transformers have performed consistently, it is distribution transformers that
have shown erratic trend. In FY12, the distribution transformer category suffered a 3.3% against
the 7.4% growth seen in power transformers.
Table 117: Performance of Transformer Industry
Name of the EquipmentWeight (%)
Industry Size (INR Crore)
YoY % Change
2010-11 2008-09 2009-10 2010-11 2011-12Transformers 20.6 12,350 -1.2 9.1 13.5 1.2Power Transformers 8.6 5,150 25.8 17.2 13.2 7.4Distribution Transformers 12 7,200 -16.9 3 13.8 -3.3Source: IEEMA
Demand Segments
The Indian transformer manufacturing is a
mature industry with large manufacturing base. Huge capacity has been added by several
manufacturers over the last 5-7 years based on the planned programs. Indian Electrical
lxxix
Figure 101: Demand Drivers fo Transformer
Equipment industry over the years has also
gained global acceptance and India has
emerged as a preferred destination for
sourcing of quality, reliable and competitively
priced equipment including transformers.
Generator Transformers: These are used
primarily as step up transformer in power
generation plants. Power transformer is said
to be one of the main and costly plant
equipment. With the 12th Plan the capacity is expected to increase by around 75,000 MW which
reflects the requirement of 96,837 MVA of generator transformers.
Transformation Capacity: Substation capacity has been added satisfactorily in 11th plan and it
will continue in the 12th plan also because of good target of generation capacity addition.
Transformation capacity addition is the primary requirement for evacuation of power from any
generating power plant. Therefore this segment will keep a high demand of the tune of 60-65
thousand MVA per annum. Transformation capacity in 11th FYP has increased at CAGR of 54%.
12th Plan also, is likely to perform in same way in order to achieve the national target.
Table 118: Transformer: Demand Creators
Transformer Demand Segment 2012-13 2013-14 2014-15 2015-16 2016-17 TOTALGT Capacity (MVA) 20,497 19,011 19,974 21,090 16,265 96,837Transformation Capacity (MVA) 67,372 62,488 65,654 69,321 53,462 318,297Industry Installations (MVA) 3,369 3,124 3,283 3,466 2,673 15,915
Export Demand (MVA) 18,000 21,420 25,490 30,333 36,096 131,339Replacement Demand (MVA) 20,000 20,000 20,000 20,000 20,000 100,000Total (MVA) 129,238 126,043 134,401 144,210 128,496 662,388
Industrial Installation: Whatever loom in industrial growth was to happen, has occurred
already. Therefore, in future more development is obvious. Although Industrial segment
contributes only 2% of total demand but it encourages customized product which can give better
profitability. Industries such as steel, oil, cement, textile, sugar, heavy engineering etc are the
segment growth drivers.
lxxx
15%
48%
2%
15%
20%Generator Transformer
Transformation Capacity
Industrial Demand
Replacement
Export
Export Demand: In the global market, performance of Indian product is acknowledged as
technically at par with the leading international companies since Indian transformer industry is
matured enough as a reliable supplier, it is exporting transformer in various parts of the world
including countries like USA, Europe, African Countries, Cyprus, Syria, Iraq and other Middle
East countries.
Table 119: Transformer Exports from India
Figures in INR Crore 2005-06 2006-07 2007-08 2008-09 2009-10 2010-11 CAGRUp to 650 kVA 65.1 175.9 234.7 251.2 379.1 460.1 48%650 kVA-10 MVA 38 127.6 161.8 200.2 189 212.4 41%Above 10 MVA 307.6 488.7 699 1273.5 1221.2 748.9 19% 410.7 792.2 1095.5 1724.9 1789.3 1421.4 28%
Source: Ministry of Commerce
Over a period of six years industry has exported the transformers at a robust CAGR of 28%. In
this, small manufacturers are now emerging as leading exporters in small transformer which has
seen highest growth rate of 48%.
Replacement Demand: As in other parts of the world, numerous power plants in India are
nearing the end of their service plan, thus requiring overhauling and modernization. This
includes replacement of existing transformers, which are on average over 30 years old and the
replacement of distribution and power transformers. BEE has started the program of efficiency
wise star rating of the transformers. It has provided additional market to the industry which ill
drive the extensive use of more efficient and reliable transformers in the future. Further, the
strengthening of the transmission and distribution grid under the R-APDRP scheme will be
growth driver for the industry.
4.5.3 Competitor Analysis
Table 120: Transformer Industry: Prominent Players
Transformers & Rectifiers Vijai Electricals BHEL Siemens India Limited ABB Limited Crompton Greaves Limited Alstom (Areva) T&D India Ltd
Key Attributes Over all more than 300 players in market Volume wise 70:30 ratio between organized and
unorganized market Organized market consist 15-20 established
players who dominate Power Transformer segment
lxxxi
Bharat Bijlee EMCO Voltamp RTS Power Accurate Transformer TELK IMP Diamond Power Infrastructure Limited
Local manufacturers dominate Distribution Transformer segment
Lack of EHV transformer testing facilityProspective Clients Central & State Transmission Utilities EPC Companies State & Private Discoms Major industries e.g. Heavy Engineering, Cement,
Steel, Railway, Defense etc.
Table 121: Bharat Heavy Electricals Limited (BHEL)
Year of Establishment 1964
Nature of Business
Manufacturing EPC Oil & Gas R&D
Products/Services
Power Transformers Switchgear BTG Sets BOP
Leading Product/Service Power Transformers BTG Sets Switchgear
Infrastructure Mfg unit: 15 Business office: 15 Service centre: 8
Annual Turnover(20010-11 and 2009-10)
INR 43,337 Crore and INR 34,154 Crore
Technology Sourcing
Siemens AG Germany Germany ABB Switzerland General Electric USA
Global Footprints More than 70 countries across the world
Indian Clientele Power Utilities, Oil & Gas Sector, Mining Sector, Indian Railways, EPC
Contractors, Cement Industry, Steel IndustryCertification ASME, API
Table 122: Siemens India Limited
Year of Establishment 1956-57 (In India)
Nature of Business
Manufacturing EPC Services R&D
lxxxii
Products/Services
Power Transformers Switchgear Network Protection & Control System Automation & Robotics Electric Motors & Alternators Substation Erection Consumer Products
Leading Product/Service Power Transformers Switchgear System Automation
Infrastructure Mfg unit: 8 Sales offices: 19 R&D center: 10
Annual Turnover(20010-11 and 2009-10)
INR 12,253 Crore and INR 9,477 Crore
Technology Sourcing Indigenous technologyGlobal Footprints More than 190 countries across the world
Indian Clientele Power Utilities, Oil & Gas Sector, Mining Sector, Indian Railways, EPC
Contractors, Cement Industry, Steel IndustryCertification IEC, ANSI, IEEE, CPRI, ISO 9001, ISO 14001, OHSAS 18001
Table 123: ABB Limited
Year of Establishment 1949 (In India)
Nature of Business
Manufacturing EPC Services R&D
Products/Services
Power Transformers Switchgear Capacitors Network Protection & Control System Automation & Robotics Electric Motors & Alternators Substation Erection Consumer Products
Leading Product/Service Power Transformers Switchgear System Automation
Infrastructure
Mfg unit: 12 Marketing offices: 23 Service center: 8 Logistic warehouse: 3 Training centers: 4 Power & Automation engineering centers: 2 Channel partners: 550
Annual Turnover INR 7,693 Crore and INR 6,372 Crore
lxxxiii
(20010-11 and 2009-10)Technology Sourcing Indigenous technologyGlobal Footprints More than 100 countries across the world
Indian Clientele Power Utilities, Oil & Gas Sector, Mining Sector, Indian Railways, EPC
Contractors, Cement Industry, Steel Industry
CertificationIEC, ANSI, IS, KEMA, BS, CSA, UL, ATEX, CE, CPRI, ISO 9001, ISO 14001, OHSAS 18001
Table 124: Crompton Greaves Limited
Year of Establishment 1937 (In India)
Nature of Business
Manufacturing EPC Services R&D
Products/Services
Power Transformers Switchgear Network Protection & Control System Automation & Robotics Electric Motors & Alternators Substation Erection Consumer Products
Leading Product/Service
Power Transformers Switchgear Rotating Machines System Automation
Infrastructure Mfg unit: 20 30 Communication points in India
Annual Turnover(20010-11 and 2009-10)
INR 6,276 Crore and INR 5,368 Crore
Technology Sourcing For SLIM Transformers with Dupont’s Nomex Thermal Insulating
Technology
Global Footprints Indonesia, Belgium, Hungary, Canada, USA, UK, Ireland, Netherland,
Sweden, France, UAE, China, Australia, New Zealand, Curacao
Indian Clientele Power Utilities, Oil & Gas Sector, Mining Sector, Indian Railways, EPC
Contractors, Cement Industry, Steel Industry
CertificationISO 9001, ISO 14001, OHSAS 18001, CPRI, IEC, ANSI, IS, KEMA, BS, CSA, UL, ATEX, CE
Table 125: Alstom (Areva) T&D India Limited
Year of Establishment 1911 (In India)
Nature of Business
Manufacturing EPC Services R&D
lxxxiv
Products/Services
Power Transformers Gas Insulated Switchgear Switchgear Network Protection & Control Electric Motors & Alternators Substation Erection
Leading Product/Service Power Transformers Switchgear System Automation
Infrastructure
Mfg unit: 8 Sales offices: 25 R&D center: 4 Engineering center: 2 Channel partners: 500
Annual Turnover(20010-11)
INR 4,037 Crore
Technology Sourcing Indigenous technologyGlobal Footprints More than 100 countries
Indian Clientele Power Utilities, Oil & Gas Sector, Mining Sector, Indian Railways, EPC
Contractors, Cement Industry, Steel IndustryCertification IEC, ANSI, IEEE, ISO 9001, ISO 14001, OHSAS 18001
Table 126: Transformers & Rectifiers
Year of Establishment 1994Nature of Business Manufacturing
Products/Services
Power Transformers Distribution Transformers Rectifier Transformers Furnace Transformers Reactors
Leading Product/Service Transformers
InfrastructureMfg unit: 3Strategic unit: 3 (for transformer component mfg)
Annual Turnover(20010-11 and 2009-10)
INR 577 Crore and INR 515.09 Crore
Technology Sourcing Indigenous technology
Global FootprintsSouth Africa, Ethiopia, Bhutan, Canada, Congo, Tanzania, Bangladesh, Mozambique, Oman, Iran, Nepal, Kenya, Ghana, USA, Australia, Uzbekistan, Saudi Arabia, UK, Philippines, UAE, Bangladesh
Indian Clientele Power Utilities, Oil & Gas Sector, Mining Sector, Indian Railways, EPC
Contractors, Cement Industry, Steel IndustryCertification ISO 9001–2008, ISO 14001–2004, OHSAS 18001–2007
lxxxv
Table 127: Vijai Electricals
Year of Establishment 1973Nature of Business Manufacturing
Products/Services Power Transformers Distribution Transformers Switchgear
Leading Product/Service Transformers
Infrastructure Mfg unit: 4 (India) + 2 (Abroad) Strategic unit: For indigenous component development
Annual Turnover(2010-11 and 2009-10)
INR 1849 Crore and INR 1609 Crore
Technology Sourcing Daihen Corporation, JapanGlobal Footprints USA, Mexico, Venezuela, Brazil
Indian Clientele
APEB, MSEB, Gujarat SEB, Rajasthan SEB, ABB, UPSEB, Asam SEB, BSEB, BSES, Enercon India Ltd, HSEB, KSEB
Kalpataru Power, PGCIL, NTPC, NPCL, Reliance Energy, Wilson Power Solutions, Siemens Ltd
CertificationLloyds-UK, Crown Agents- UK, BSI Inspectorate Griffith, OMIC Japan, CAPE- Thailand, Tubescope Vecto GmbH Germany
Table 128: Voltamp
Year of Establishment 1963
Nature of Business Manufacturing Services
Products/Services
Transformers Unitized Substation Induction Furnace Lighting Arrestor Electrical Maintenance
Leading Product/Service TransformersInfrastructure Mfg unit: 2Annual Turnover(2010-11 and 2009-2010)
INR 526 Crore and INR 542 Crore
Technology Sourcing Indigenous technologyGlobal Footprints India, Nepal, Bhutan, Indonesia, Sri Lanka, Middle East Asian CountriesIndian Clientele NTPC, ONGC, NALCO, IOCL, BPCL, AEC-SEC, GSFC, GACLCertification ISO 9001 – 2000, ISOQAR Accreditation, IEC
Table 129: Bharat Bijlee
Year of Establishment 1946
Nature of Business Manufacturing EPC
Products/Services Power transformers: Station transformer, Unit Auxiliary transformer
lxxxvi
Elevator System: Gearless motors Motors: 3-phase induction motors, Pumps, Sub Station erection projects
Leading Product/Service Transformers
Infrastructure Mfg unit: 1 Branch Office: 13
Annual Turnover(2011-12 and 2010-11)
INR 781 Crore and INR 769 Crore
Technology Sourcing Indigenous technology
Global Footprints Bangladesh, Tanzania, Algeria, Indonesia, Nepal, Philippines, Kenya,
Namibia, Oman, UAE, Egypt, Jordan, South Africa
Indian Clientele AAI, NTPC, PGCIL, BSEB, BSES, MPPTCL, MSETCL, TATA POWER,
TORRENT POWER, RILAINCE INFRA, UPPTCL, WBSETCL, BGR Energy, NALCO, Singareni Collieries
Certification ISO 9001–2008, BIS, Canadian Standards Association
Table 130: EMCO
Year of Establishment 1964
Nature of Business Manufacturing EPC Services
Products/Services
Transformers Sub-station EPC Energy meters Transmission Line & Towers
Leading Product/Service Transformers EPC
Infrastructure Mfg unit: 6Annual Turnover(2010-11 and 2009-10)
INR 1049 Crore and INR 978 Crore
Technology Sourcing Indigenous technology
Global Footprints Presence across 45 nations America, Europe, Middle-East countries, Asia Pacific
Indian Clientele Power Utilities, Oil & Gas Sector, Mining, EPC Contractors, Cement
Industries, Steel IndustriesCertification ISO 9001–2008, ISO 14001-2004, OHSAS 18001-2007, IS, IEC, ANSI
4.5.4 Financial Analysis
Table 131: Competitor Analysis
Sr No Company Name2010-2011 (Figures in Crore)
ATO (V)
Op Ex (W)
Raw Mat. Cost (X) EBIDTA (Y) PAT (Z)
lxxxvii
INR INR INR X/W INR Y/V INR Z/V
1 BHEL 43,337 33,856 23,209 69% 9,538 22%6,01
114%
2Siemens India Limited
12,253 3,895 2,162 56% 1,409 12% 868 7%
3 ABB Limited 7,693 7,126 5,518 77% 393 5% 185 2%
4Crompton Greaves Limited
6,276 5,018 2,828 56% 937 15% 694 11%
5Alstom (Areva) T&D India Ltd*
4,037 3,718 2,875 77% 319 8% 65 2%
6Transformers & Rectifiers
577 510 454 89% 66 11% 40 7%
7 Vijai Electricals 1,849 1,689 1,350 80% 160 9% 18 1%8 Voltamp 526 470 442 94% 67 13% 51 9%9 Bharat Bijlee** 781 685 535 78% 96 12% 60 7%10 EMCO 1049 1054 900 - (4.7) - (67) -
*Figures for 2009-10; **Figures for 2011-2012
4.5.5 Growth in Market Size
Transformer industry has witnessed consistent growth in the market size and this trend is likely
to continue in the future also. Indian small and medium transformer manufacturers are expected
to gain momentum due to various government reform programs.
Source: IEEMA
lxxxviii
2007-08 2008-09 2009-10 2010-11 2011-12 2012-13 2013-14 2014-15 2015-16 2016-170
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
10
,09
5
9,9
73
10
,88
1
12
,35
0
12
,49
8
13
,18
4
13
,90
7
14
,67
0
15
,47
4
16
,32
3
INR
Cro
re
CAGR:
5.5%
Figure 102: Transformer Industry: Past Performance and Expected Market Size
Export will also be a good growth driver for this industry. In the 11 th Plan this industry has
grown at a CAGR of 5.5%. By the end of 12 th Plan, CEA has envisaged this market size of INR
29,500 Crore. While looking at the past trend, this industry is expected to grow up to the size of
INR 16,323 Crore.
4.5.6 Prospective Clients
Transmission Utilities
Large amount of projects planned by PGCIL and State transmission Utilities.
Nodal investors in transmission sector.
Distribution Utilities
Large number of projects coming up under R-APDRP and RGGVY.
Thrust on decreasing the AT&C losses: investments in distribution and sub transmission
infrastructure.
EPC Companies
EPC players are flooded with projects due to transformation in utility approach from cost
plus to turnkey basis.
Better commercial arrangement can be outlined.
Repeating orders.
Easy reach to clients exposed to limited established players (transformer manufacturers).
4.5.7 Business Risk
Industry Level risk
Almost all major players have increased their capacities leading to excess supply situation in
the industry.
Pricing becoming an issue especially with Govt. clients.
CRGO Steel and Copper are the key raw material, which are highly price volatile which can
cause unfavourable impacts on pricing.
Transformer Industry is highly dependent and driven by growth in power sector.
lxxxix
Any dent in performance of sector affects the growth of the industry.
Consumer Level Risk
Choice of states and schemes: Certain states and schemes have had huge execution
challenges, administrative and payment issues.
The L1 guidelines are objective leaves no room for subjective matters like quality.
Unilateral testing by State Utilities: Leading to false results and develops dispute. Also
bottleneck in High Voltage Transformer Testing in the Country.
Local administrative and executive staff at utilities: Results in to delayed payments.
4.6 Energy Meter
An electricity meter or energy meter is a device that measures the amount of electric energy
consumed by a residence, business, or an electrically
powered device. Electricity meters are typically calibrated
in billing units, the most common one being the kilowatt
hour (kWh). Periodic reading of electric meters establishes
billing cycles and energy used during a cycle.
In settings when energy savings during certain periods are desired, meters may measure demand,
the maximum use of power in some interval. ‘Time of Day’ metering allows electric rates to be
changed during a day, to record usage during peak high-cost periods and off-peak, lower-cost,
periods. Also, in some areas meters have relays for demand response shedding of loads during
peak load periods.
4.6.1 Types of Energy Meter
Electricity meters operate by continuously measuring the instantaneous voltage (volts) and
current (amperes) and finding the product of these to give instantaneous electrical power (watts)
which is then integrated against time to give energy used (joules, kilowatt-hours etc.). Meters for
smaller services (such as small residential customers) can be connected directly in-line between
source and customer. For larger loads, more than about 200 ampere of load, current transformers
xc
Figure 103: Energy Meter
are used, so that the meter can be located other than in line with the service conductors. The
meters fall into two basic categories, electromechanical and electronic.
Electromechanical Meter
The most common type of electricity meter is the
electromechanical induction watt-hour meter. The
electromechanical induction meter operates by
counting the revolutions of an aluminum disc which
is made to rotate at a speed proportional to the
power. The number of revolutions is thus
proportional to the energy usage. The voltage coil
consumes a small and relatively constant amount of
power, typically around 2 watts which is not
registered on the meter. The current coil similarly
consumes a small amount of power in proportion to the square of the current flowing through it,
typically up to a couple of watts at full load, which is registered on the meter.
Electronic Meter
Electronic meters display the energy used on an
LCD display, and can also transmit readings to
remote places. In addition to measuring energy used,
electronic meters can also record other parameters of
the load and supply such as maximum demand,
power factor and reactive power used etc. They can
also support time-of-day billing, for example,
recording the amount of energy used during on-peak
and off-peak hours.
Now a day, electronic meters are able to store the data for a long time which can be downloaded
at any time of need. Meters with battery back up are able to transmit the data even when main
power supply is off. Various kinds of signaling and indication functions are available to detect
xci
Figure 104: Electromechanical Meter
Figure 105: Electronic Meter
any kind of tempering or violation of safety norms. All of these functions are controlled through
inbuilt electronic microprocessor.
HTMD Meter
This is instrument transformers supported metering
system. This type of meter is connected through the
secondary of current transformer and potential
transformer. These are used at the points in power
system where voltage and current both are at very high
level and their direct measurement is not possible.
Technical Specification:
Type: 3 Phase
Accuracy Class: 0.1, 0.2, 0.5
Current Rating: For the load above 200 Ampere where CT is used
Voltage Rating: For the system above 440
Volts where PT is used
Application:
Generating Stations (Apex Meters)
EHV Substations (Apex Meters)
Distribution Substations
HT Consumers
LTCT Meter
This is current transformer supported metering
system. This type of meter is connected through
the secondary of current transformer but potential
transformer is not used. These are used at the
points in power system current is at very high
level and its direct measurement is not possible.
xcii
Figure 106: HTMD Meter
Figure 107: Apex Meters
Figure 108: LTCT Meter
Technical Specification:
Type: 3 Phase
Accuracy Class: 0.5, 1.0
Current Rating: For the load above 200 Ampere where CT is used
Voltage Rating: For the system up to 440 Volts where PT is not used
Application:
HT Consumers
LT Consumers
DT Metering
LT Whole Current Meter
These meters are free from the use of instrument transformers. These meters are put in to the
path of main electrical circuit. Whole current implies the fact that the entire load current in the
electrical circuit passes through the meter. These energy meters are installed for single and three
phase supply connection types with different current ratings. They are suitable for low voltage
residential supply connections, small and medium
enterprises and low voltage distribution transformer metering. They are designated with single or
three phase supply type, current carrying capacity and accuracy class indices of 1.0 and 2.0 in
compliance with international metering standards.
Technical Specification:
Type: 1 Phase and 3 Phase
Accuracy Class: 1.0, 2.0
Current Rating: For the load up to 100 Ampere
where CT is not used
Voltage Rating: For the system up to 440 Volts
where PT is not used
Application:
Domestic Consumers
xciii
Figure 109: LT Whole Current Meter
Small Commercial Complexes etc.
Smart Metering System: Prepaid Meter
Smart metering has gained popularity by bringing
benefits to all stakeholders in the utilities industry.
Different payment methods available via smart meters
for the amount of energy consumed help end users to
increase payment transparency and enable utilities to
easily comply with regulations on consumer rights.
Prepaid service options have become an attractive
payment solution allowing users to better manage their
energy consumption and optimize their budget
allocation.
Prepayment metering is simple and user friendly. Prepayment or ‘pay as you go’ has been
accepted by the utilities worldwide as a way to improve customer service, cash flow and the
revenue cycle. It is altogether a new arena in India and is likely to be important for revenue and
xciv
Figure 110: Prepaid Meter
Figure 111: Running Cycle of Prepaid Meter
energy management. This will benefit the State Electricity Boards (SEBs), private utilities and
the electricity consumers.
4.6.2 Competitor Analysis
There are more than twenty five companies manufacturing approximately 20 million energy
meters per year in India.
Table 132: Genus Power Infrastructures Ltd
Year of Establishment 1992
Nature of Business
Manufacturing Turnkey Services Automation R&D
Products/Services
Various Kind of Meter Manufacturing EPC in T&D Manufacturing of Meter Testing Equipments Inverters & Solar Product Manufacturing System Automation & SCADA Implementation Custom Built Software Billing Solutions
Leading Product/Service Meter Manufacturing System Automation
Infrastructure Mfg unit: 2 (Rajasthan, Uttarakhand)Annual Turnover(2010-2011 and 2009-10)
INR 720 Crore and INR 623 Crore
Technology Sourcing Indigenous Technology
Global Footprints USA, Germany, UK, Ireland, Canada, Bangladesh, Middle East, Africa,
Brazil, China, Singapore, Nepal
Indian Clientele
Various SEBs of States such as: KSEB, ASEB, RSEB, MSEB, MPSEB, UPPCL, UPCL, DHBVNL, JKPDD
Various Government Organization Such as: ITI, CDOT, Central Electronics Ltd., BSNL, DRDO, BEL
Other Players Such as: Reliance Energy, Ahmadabad Electricity Co., Surat Electricity Company, Tata Power, Torrent Power Ltd, Maruti Udyog Ltd, Instruments Ltd
CertificationISO 9001:1994, IECQ, DLMS Certification, IS, IDEMI, ERTLAwards from BHEL, NPCL etc.
Table 133: Secure Meters Limited
Year of Establishment 1988Nature of Business Manufacturing
Turnkey Services
xcv
Automation R&D
Products/Services
Various Kind of Meter Manufacturing EPC in T&D Manufacturing of Meter Testing Equipments System Automation & SCADA Implementation Custom Built Software Billing Solutions
Leading Product/Service Meter Manufacturing System Automation Manufacturing of Meter Testing Equipments
Infrastructure Mfg unit: 3 (India) + 4 (UK & Sweden)Annual Turnover(2010-2011)
INR 599 Crore
Technology Sourcing In house R&DGlobal Footprints Presence in 50 countries across the world
Indian Clientele Power Utilities, Oil & Gas Sector, Mining Sector, Indian Railways, EPC
Contractors, Cement Industry, Steel IndustryCertification NABL, IEC, ANSI, IEEE, ISO 9001, ISO 14001, OHSAS 18001
Table 134: L&T Limited (Electrical & Automation Division)
Presence in Market Since early 90s
Nature of Business Manufacturing Turnkey Services R&D
Products/Services
Various Kind of Meter Manufacturing System Automation & SCADA Implementation Energy Management Services Relay Manufacturing
Leading Product/Service Meter Manufacturing Relay Manufacturing
Infrastructure Mfg unit: 1 (Mysore)Technology Sourcing Indigenous Technology
Global Footprints
Mfg in UK: Collaboration with CyanTechnology; South East Asia, Middle East Countries, Africa Focus on European Markets
Indian Clientele Various SEBs across country Industrial Consumers Private Utilities
Certification NABL
Table 135: ECE Industries Limited
Year of Establishment 1945 (Metering Division Since 1962)
xcvi
Nature of Business Manufacturing Turnkey Projects
Products/Services
Energy Meter AMR Solutions Transformer Switchgear Elevator
Leading Product/Service Energy Meter Transformers
Infrastructure Mfg unit: 1 (Energy Meter at Hyderabad)Annual Turnover(2010-2011 and 2009-10)
INR 201 Crore and INR 159 Crore
Technology Sourcing Veb Electo Apparate-Werke, Germany
Indian Clientele Various SEBs across country Industrial Consumers Private Utilities
Certification ISO 9001-2000, BIS,
Table 136: HPL Metering Pvt. Ltd
Year of Establishment 1956Nature of Business Manufacturing
Products/Services
Energy Meter Relays Switchgears Lighting Luminaries Wires & Cables
Leading Product/Service Energy Meter Switchgears
Infrastructure
Mfg unit: 9 (Meters: 2) Marketing Offices: 69 Dealers: 1,200 Retailers: 15,000
Average Annual Turnover INR 1,000 Crore
Global Footprints Middle East and SAARC countries European Markets
Indian Clientele Various SEBs across country Industrial Consumers Private Utilities
Certification ISO 9001:2000, IEC,
Table 137: Capital Power Systems Ltd
Year of Establishment 1988
xcvii
Nature of Business Manufacturing
Products/Services Energy Meter Relays
Leading Product/Service Energy MeterInfrastructure Mfg unit: 1Annual Turnover (2009-10) INR 72.5 Crore
Indian Clientele
Various Govt. Utilities such as: DHBVN, JSEB, Orissa utilities, CSEB, WBSEDCL, UP utilities, KSEB, Maharashtra utilities, Jaipur utilities, AP utilities, Haryana utilities
Private companies such as: Lanco, Tata, KEC International, Yamuna Power & Infrastructure, NCC Ltd, IVRCL, Kalpataru, Maytas, RPG, Kirlosker, A2Z, Jyoti Structures Ltd, Shyama Power India Ltd
Certification ISO 9001:2000, IEC, IS
4.6.3 Industry Performance
100% metering of power supply connections insisted by many state regulatory commissions and
support by Ministry of Power through various reform programs, particularly RGGVY and now
RAPDRP has provided impetus to demand for meters. Overall environment for metering
industry in 09-10 has been generally good. Though physical sales did pick up as compared to
2008-09, prices have continued to fall. During the 2011-2012, growth rate of energy meters has
remained 6.1% which is 60% lower as compared to FY 2010-2011 that saw a growth of 15.4%.
Table 138: Performance of Metering Industry
Name of the EquipmentWeight (%)
Industry Size (INR Crore)
YoY % Change
2010-11 2008-09 2009-10 2010-11 2011-12Energy Meters 3.7 2,250 -8.2 11.3 15.4 6.1Source: IEEMA
This can be attributed to sharp decline in financial health of most of distribution utilities during
the FY 2011-2012.
xcviii
Figure 112: Export of Electrical Meters
During the Year 2009-10 sales of
energy meters increased by over
11.3% mainly due to 38% growth in
Single phase static meters. Share of
Electromagnetic meters has further
reduced to 4.5%. CEA guidelines,
which have mandated use of static
meters, have seen the Indian energy
meter market shift largely to static meters. Market share of conventional electromagnetic meters
is on decline and is less than the 5% in 2010-2011.
4.6.4 Market Prospects
The demand for meters, both for Single Phase and Three Phase, is expected to remain good for
next 2-3 years. Utilities are also procuring Indian companion standard compliant meters for
feeders, transformers and HT Consumers. This will lead to good demand for system meters.
Reasonable flow of enquiries with short delivery schedules have been observed from various
SEBs. Procurement of meters for RGGVY is being done by project contractors. An overall sale
of meter industry is expected to remain at current level. The basic underlying problems being
faced by the industry remain same, some of them are actually found to be on the rise.
Varying tender specifications, decreasing prices, practically little attention to quality in the
procurement procedures, etc. continue to bother manufacturers. Huge numbers of meters are
being procured for BPL consumers under RGGVY program through contractors, where both
quality and price have received severe beating. Lack of proper metering at every required point
has been the critical issue with the whole power sector (especially with distribution sector) in
India. But now efforts are being made to put the power sector on track of commercial principle.
It can be achieved only when a utility ensures 100% metering status.
xcix
2006-07 2007-08 2008-09 2009-10 2010-110
50
100
150
200
250
300
51
71 71
165
256
INR
Cro
re
Source: Ministry of Commerce
Table 139: Strategic Analysis
Metering industry has witnessed consistent growth in all aspects such as market size, volume and
quality etc. This trend is likely to continue in the future even at a higher pace. Indian meter
manufacturing industry may gain momentum because of power sector reforms, reduction of
T&D and commercial losses etc. In the 11th Plan this industry has grown at an aggressive CAGR
of 5.8%. By the end of 12th Plan, CEA has envisaged this market size of INR 5,500 Crore. While
looking at the past trend, this industry is expected to grow up to the size of INR 3,158 Crore.
c
Growth Drivers 12th Five Year PlanRGGVY and R-APDRP Projects5 Crore new connections to be addedInvestment in Smart Grid: INR 9,500 CroreInstallation of 850,000 new DTs which require metering also
Market CompetitorsGenus Power Infrastructures LtdSecure Meters LtdL&T LimitedCapital Meters LtdECE Industries LtdElster Metering Pvt. Ltd.Landis Gyr LtdHPL Metering Pvt. LtdMahashakti Energy LtdAutomatic Electric LtdPower ProtectionBentec Electricals & Electronics Ltd Prospective Clients
Central & State transmission utilitiesGovt. & private discomsIndustrial Consumers
Current IssuesHigh diversity in utilities’ demandLack of standardization of software for different metersDiversity in meter class in different statesHigh performance indices and lack of meter testing facilitiesDurability of metersLack of focus on exports
Business RiskMore than 50% market share is held by top two playersPricing issue specially with Govt. clientsIndustry is highly dependent and driven by growth in power sectorLack of domestic testing facility at large scale
Figure 113: Metering Industry: Past Performance and Expected Market Size
CHAPTER – 5
CHALLENGES AND ISSUES
5.1 Increasing Imports: A Major Challenge
Imports of electrical equipment have grown in the past five years at a CAGR of 28.28%. Current
export-import trends based on select major ports trade data indicates alarming growth of almost
20% in imports; especially from China, South Korea, Germany and other EU countries. The
unfavorable domestic economic situation due to depreciation in Indian Rupee, high inflation,
high interest costs, credit squeeze etc. is having a significant adverse effect on the bottom line of
the industry; apart from intense overseas competition. This situation is getting exacerbated by the
turmoil in the global economy.
ci
2007-08 2008-09 2009-10 2010-11 2011-12 2012-13 2013-14 2014-15 2015-16 2016-170
500
1,000
1,500
2,000
2,500
3,000
3,500
1,9
08
1,7
52
1,9
50 2,2
50
2,3
27
2,5
25
2,6
27
2,8
24
2,9
86
3,1
58
INR
Cro
re
CAGR: 5.8%
Figure 114: CHINA: Import Trend of Electrical Equipments
Prices of key inputs / raw material, especially which are imported in large quantities, are on an
upward trend. Stiff competition in the domestic market from foreign suppliers and also in global
markets is eroding the price competitiveness of Indian manufacturers. The price difference
between domestic companies vis-à-vis Chinese manufacturers is mainly due to disadvantages
faced by domestic manufacturers (State and local levies, higher financing costs, lack of quality
infrastructure, dependence on foreign sources for critical inputs / raw material, etc.), as well as
subsidies / incentives provided to the Chinese manufacturers by their government. It is widely
known that Chinese imports are relatively cheaper because equipment makers from China benefit
from low interest rates and an undervalued currency, which in itself leads to cheaper exports.
India now has adequate domestic capacity to fulfill the anticipated annual demand for power
generation capacity augmentation, which was not the case earlier.
A most recent positive step taken by Indian Government is the approval of long-delayed proposal
to levy 21% import duty on sourcing power equipment from overseas. This move will benefit
domestic equipment manufacturers in the country. In the July 2012, Indian Govt. has approved
5% basic customs duty, 12% Counter Veiling Duty (Excise Duty) and 4% Special Additional
cii
2002-032003-04
2004-052005-06
2006-072007-08
2008-092009-10
2010-11
2011-12(Apr-Dec)
0
10,000
20,000
30,000
40,000
50,000
60,000
2,4744,749 5,616
8,2485,238 3,792
7,280 6,0128,729
6,3577,366
13,00015,765
20,206 21,74724,308
39,658 40,551
47,71244,908
Electrical Equipments Total Imports
CAGR: 17%
2002-032003-04
2004-052005-06
2006-072007-08
2008-092009-10
2010-11
2011-12(Apr-Dec)
0
50,000
100,000
150,000
200,000
250,000
3,388 5,434 7,987 12,28119,191
30,70045,530 45,912
53,968 49,474
13,512 18,62531,892
48,117
79,009
109,116
147,606 146,049
198,079212,080
Electrical Equipments Total Imports
CAGR: 41%
Source: Ministry of Commerce
Source: Ministry of Commerce
Figure 115: KOREA: Import Trend of Electrical Equipments
Duty (SAD), totaling 21%. Earlier, the government had imposed of 5% customs duty on import
of power equipment for projects of less than 1,000 megawatt (MW) capacity, while projects with
more than that capacity did not attract import levy.
5.2 Critical Issues
The T&D sector today faces several major challenges. Some of them are as under.
Inadequate Availability of Critical Inputs (Raw Material)
Looming Skill Gap, Manpower Issues
Lack of Standardization
Inadequate Domestic Testing and Calibrating Infrastructure
Frame Model Procurement Guidelines/Practices for Utilities
Promotion of Innovation and R&D in the Industry
Right of Way, Forest Clearances and Land Acquisition Issues
Price Variation Issues
ciii
CHAPTER – 6
CONCLUSION AND RECOMMENDATIONS
6.1 Business Opportunities
After the comprehensive analysis of the present market scenario, market players, growth drivers
of the sector, imports & exports, future investment etc. following market has been explored as a
business opportunity for a new entrant in the market.
Name of the Equipment Business OpportunityCable OutstandingConductor LowTransmission Tower MediumSwitchgear & Control HighTransformer Medium to HighEnergy Meter Outstanding
6.2 Cable
Cable manufacturing in India is the business full of opportunity. Although this segment has
witnessed the highest growth in the market size, yet India needs more cable manufacturing
capacity in EHV segment. Since EHV cable manufacturing is highly technology oriented process
therefore number of existing players in this segment is relative low. For entering in to this field
civ
now Indian manufacturers are doing partnership with some technologically mature player
irrespective of Indian or foreign origin. Future of this industry can be rated as ‘Outstanding’.
CableMarket Size (2011-12) INR 19,496 CroreManufacturing Capacity Utilization (2010-11) 47% (Power Cables Only)CAGR (11th FYP) 14.5%Optimistic Market Size (2016-17) (Y) INR 37,000 CroreMost Likely Market Size (2016-17) (X) INR 38,394 CroreRelative Achievement (X/Y) 104%Business Opportunity Outstanding
6.3 Conductor
Conductor manufacturing capacity in India is sufficient and it is not being considered as a very
attractive field from manufacturer point of view. It can be attributed to plans and process to
adopt HVDS and ABC technology by distribution utilities in the various states. Overall business
opportunity in this segment is ‘Low’.
ConductorMarket Size (2011-12) INR 5,914 CroreManufacturing Capacity Utilization (2010-11) 68%CAGR (11th FYP) 5.9%Optimistic Market Size (2016-17) (Y) INR 15,462 CroreMost Likely Market Size (2016-17) (X) INR 7,875 CroreRelative Achievement (X/Y) 51%Business Opportunity Low
6.4 Transmission Tower
Tower manufacturing in India is in good state and performing satisfactorily apart from lack of
EHV and UHV tower testing facilities with some players. Domestic manufacturers have
sufficient capacity and they are increasing their capacity on the right pace. It is EPC and Turnkey
Solution Provider route which can let a new player enter in to the market easily. It is because of
now most of the companies are shifting from manufacturing to additional construction activities.
Future of this industry can be rated as ‘Medium’.
Transmission Tower
cv
Market Size (2011-12) INR 6,257 CroreManufacturing Capacity Utilization (2010-11) 67%CAGR (11th FYP) 6.4%Optimistic Market Size (2016-17) (Y) INR 1,8038 CroreMost Likely Market Size (2016-17) (X) INR 8,545 CroreRelative Achievement (X/Y) 47%Business Opportunity Medium
6.5 Switchgear & Control
Switchgear manufacturing in India is dominated by a few big players followed by medium and
small players. Since this industry is highly technology oriented therefore number of capable
players in this segment is relative low. This segment may be one of the most rewarding for a new
entrant because of lack of domestic players in EHV and UHV category. Technological
partnership with some technologically mature player may be the entry strategy for a new player.
Therefore future of this industry can be rated as ‘High’.
Switchgear & ControlMarket Size (2011-12) INR 8,882 CroreManufacturing Capacity Utilization (2010-11) 66% (HT Switchgears Only)CAG (11th FYP) 7.9%Optimistic Market Size (2016-17) (Y) INR 22,000 CroreMost Likely Market Size (2016-17) (X) INR 12,977 CroreRelative Achievement (X/Y) 59%Business Opportunity High
6.6 Transformer
Transformer manufacturing can be divided in to two segments. One is Distribution transformers
and another is Power transformers. Indian market is performing well with respect to both
segments. Some major bottlenecks such as limited domestic EHV and UHV transformer testing
facilities and in house sourcing of key raw material are hindering the sector growth. In spite of
these challenges transformer industry is able to cope up with the foreign players. Future of this
industry can be rated as ‘Medium to High’.
TransformerMarket Size (2011-12) INR 12,498 CroreManufacturing Capacity Utilization (2010-11) 75%
cvi
CAGR (11th FYP) 5.5%Optimistic Market Size (2016-17) (Y) INR 29,500 CroreMost Likely Market Size (2016-17) (X) INR 16,323 CroreRelative Achievement (X/Y) 55%Business Opportunity Medium to High
6.7 Energy Meter
Manufacturing of Energy Meters in India can promise any manufacturer for a long lasting and
consistent growth. This business is likely to follow one of the highest growth rates at least for
next ten to fifteen years. Modern technology and state of the art manufacturing facility is the key
to success in this business. Lack of adequate Meter testing facility is one of the major bottlenecks
of this industry. Now it has become technology oriented process therefore number of leading
players in this segment is very low. For the initial stage, technological partnership with a
domestic or international mature player can be the entry strategy.
Energy MeterMarket Size (2011-12) INR 2,387 Crore11th FYP CAGR 5.8%Optimistic Market Size (2016-17) (Y) INR 5,500 CroreMost Likely Market Size (2016-17) (X) INR 3,158 CroreRelative Achievement (X/Y) 57%Business Opportunity Outstanding
cvii
BIBLIOGRAPHY AND REFERENCE
[1] Ministry of Power, GoI, “Report of the Working Group on Power for 12th Plan: January
2012”
[2] Ministry of Power, R-APDRP, RGGVY
[3] Planning Commission, Shunglu Committee Report, “Report of High Level Panel on
Financial Position of Distribution Utilities” December 2011
[4] Power Finance Corporation
[5] Central Electricity Authority, “Draft, National Electricity Plan (Volume I and Volume II)”
[6] Central Electricity Authority, “Annual and Monthly Summary Report” of Transmission &
Distribution Work
[7] Department of Industrial Policy and Promotion, “Indian Electrical Equipment Industry
Mission Plan: 2012-2022, Base Document”
[8] Central Electricity Regulatory Commission
[9] Ministry of Commerce, GoI
[10] Indian Electrical & Electronics Manufacturer Association (IEEMA)
[11] Powerline Magazine, June 2012
[12] Electrical Monitor Magazine’s Website
[13] Websites and Annual Reports (of last two to three years) of following companies
1. Bharat Heavy Electricals Limited2. Power Grid Corporation of India3. ALSTOM (AREVA) T&D India Ltd.4. Crompton Greaves Limited5. SIEMENS India Limited6. ABB Limited7. Transformers & Rectifiers8. Vijay Electricals Limited9. EMCO10. Voltamp11. Bharat Bijlee Limited12. Sterlite Technologies Limited13. JSK Industries Pvt. Limited14. Diamond Power Infrastructure Limited15. Deepak Cables (India) Limited16. KEC International17. Kalpataru Power Transmission Limited18. IVRCL19. Jyoti Structures Limited
cviii
20. Gammon India Ltd21. Unitech Power Transmission Ltd22. Aster Private Ltd23. Man Structurals Pvt. Ltd24. Biecco Lawrie Limited25. Jyoti Limited26. Vishal Transformers & Switchgears (P) Ltd27. Heptacare Power Industries Pvt. Limited28. Hivoltrans Electricals Pvt. Ltd29. SCT Limited30. Macroplast Pvt. Ltd31. Kappa Electricals32. Genus Power Infrastructures Ltd33. Secure Meters Limited34. L&T Limited (Electrical & Automation Division)35. ECE Industries Limited36. HPL Metering Pvt. Ltd37. Capital Power Systems Ltd
For Annexure I and Annexure II
Following assumption and steps have been adopted while finding out the future market size as
per tables displayed below.
[1] This data sheet includes major T&D equipments as per mentioned by IEEMA. IEEMA
consists 95% Indian Electrical Equipment Manufacturers.
[2] Actual market size for 2010-11 was available. Apart from it YoY % growth rate was
available. Accordingly, markat size for 2008-09, 2009-10 and 2011-12 has been calculated.
[3] On the basis of available market size of last five consecutive years, CAGR has been
calculated.
[4] Assumption for market size forecasting: Conservative approach has been adopted with
consideration that Market will grow at the same CAGR of last five years.
[5] Prospective market has been calculated with the help of found CAGR.
[6] Assessed Market in 2017 and 2022 by CEA has been taken from "Indian Electrical
Equipment Industry Mission Plan 2012-2022: Base Document" from "Ministry of Heavy
Industries and Public Enterprises"
cix
ANNEXURE– I (Following raw data sourced from IEEMA, CEA & thereafter calculated)
Performance of Major T&D Equipments Industry: 2007-08 to 2011-12
Weight (%)
2007-08 2008-09 2009-10 2010-11 2011-12
Market Size
Market Size
YoY Growth (%)
Market Size
YoY Growth (%)
Market Size
YoY Growth (%)
Market Size
YoY Growth (%)
Rotating Machines 10.5 5144 4964 -3.5% 5624 13.3% 6310 12.2% 6373 1.0%
LT Motors 5.1 2305 2155 -6.5% 2644 22.7% 2985 12.9% 3021 1.2%HT Motors 2.1 996 1126 13.1% 1242 10.3% 1225 -1.4% 1492 21.8%
Alternators 1.9 888 914 2.9% 924 1.1% 1115 20.7% 918 -17.7%
FHP Motors 1.4 733 642 -12.3% 665 3.5% 780 17.3% 734 -5.9%
Switchgear 15.1 6557 6557 0.0% 7508 14.5% 9100 21.2% 8882 -2.4%Power Contactors 2.6 670 551 -
17.8% 777 41.0% 1000 28.7% 896 -10.4%
LT Circuit Breakers 3.6 888 880 -1.0% 1138 29.4% 1360 19.5% 1281 -5.8%
MCBs 2.8 723 793 9.7% 975 23.0% 1050 7.7% 1213 15.5%S/F and F/S Units 0.5 213 189 -
11.1% 199 5.3% 207 3.8% 198 -4.3%
HT Circuit Breakers 5.6 1728 1769 2.4% 1667 -5.8% 2140 28.4% 2016 -5.8%
Cables 25.8 11337 11836 4.4% 13268 12.1% 15510 16.9% 19496 25.7%PVC Power Cables 17.9 6807 7780 14.3% 8908 14.5% 9710 9.0% 11400 17.4%
Control & Special Purpose Cables
7.9 4260 3127 -26.6% 3202 2.4% 4300 34.3% 6214 44.5%
Transformers 20.6 10095 9973 -1.2% 10881 9.1% 12350 13.5% 12498 1.2%
Power Transformers 8.6 3086 3882 25.8% 4549 17.2% 5150 13.2% 5531 7.4%
Distribution Transformers 12 7392 6143 -
16.9% 6327 3.0% 7200 13.8% 6962 -3.3%
Capacitors 0.9 336 345 2.6% 382 10.7% 515 34.9% 506 -1.8%HT Capacitors 0.3 120 128 6.7% 169 32.2% 200 18.2% 183 -8.3%
LT Capacitors 0.6 220 222 1.0% 217 -2.2% 315 44.9% 319 1.4%
Energy Meters 3.7 1908 1752 -8.2% 1950 11.3% 2250 15.4% 2387 6.1%
Transmission Lines 23.4 10915 12389 13.5% 13529 9.2% 14070 4.0% 13957 -0.8%
Transmission Line Towers 12.6 4876 5193 6.5% 6180 19.0% 6600 6.8% 6257 -5.2%
Conductors 10.8 4703 5704 21.3% 5716 0.2% 5670 -0.8% 5914 4.3%
cx
Total 100 46247 47496 2.7% 52863 11.3% 60105 13.7% 64072 6.6%
ANNEXURE– II (Following raw data sourced from IEEMA, CEA & thereafter calculated)
CAGR 08-09 to 11-12
Prospective Market Size Market Size in 2017
(Assessed by
CEA) (Y)
Relative Achievemen
t (Y/X)
2012-13 2013-14
2014-15
2015-16
2016-17
Market Size Market Size
Market Size
Market Size
Market Size (X)
Rotating Machines 5.5% 6724 7094 7484 7896 8331 15000 56%
LT Motors 7.0% 3232 3459 3701 3960 4237 HT Motors 10.6% 1651 1826 2020 2235 2473 Alternators 0.8% 925 933 941 948 956 FHP Motors 0.0% 734 735 735 735 736 Switchgear 7.9% 9581 10336 11151 12030 12977 22000 59%
Power Contactors 7.5% 963 1036 1114 1198 1288
LT Circuit Breakers 9.6% 1404 1538 1686 1847 2025
MCBs 13.8% 1380 1571 1788 2036 2317
S/F and F/S Units -1.8% 195 191 188 184 181
HT Circuit Breakers 3.9% 2095 2177 2263 2352 2444
Cables 14.5% 22326 25567 29278 33528 38394 37000 104%
PVC Power Cables 13.8% 12968 14752 16782 19091 21718
Control & Special Purpose Cables 9.9% 6828 7504 8247 9063 9960
Transformers 5.5% 13184 13907 14670 15474 16323 29500 55%
Power Transformers 15.7% 6400 7405 8569 9914 11472
Distribution Transformers -1.5% 6859 6757 6657 6558 6461
Capacitors 10.8% 560 620 687 761 843 1000 84%HT Capacitors 11.2% 204 227 252 280 312 LT Capacitors 9.8% 351 385 422 464 509 Energy Meters 5.8% 2525 2670 2824 2986 3158 5500 57%
Transmission Lines 6.3% 14842 15783 16783 17847 18978 33500 57%
Transmission Line Towers 6.4% 6659 7087 7543 8028 8545 18038 47%
Conductors 5.9% 6263 6632 7023 7437 7875 15462 51%Total 8.5% 69513 75415 81819 88767 96305 177000 54%
cxi