Promo 2015.1CPRECISION HAND TOOL PROMOTION

Mic

ro

meters

436 OUTSIDE MICROMETERS

• The most popular micrometers used by skilled professionals worldwide• Accurate, rugged, and easy to use• Starrett satin chrome finish – no glare – resists rust• Staggered lines and distinct figures for precise and

easy readability• Balanced frame and thimble design ensure easy handling• Tapered frame for use in narrow slots and tight places• Quick and easy adjustment• Micro-lapped measuring faces• Extremely hard and stable one-piece spindle

263 MICROMETER HEADS

• Furnished with 1/2" (12.7mm) diameter clamping surface• No glare satin chrome finish• Reading surfaces: satin-finish• Graduations: .001" (0.01mm)• Models with lock nut, plain thimble, or ratchet and

lock nut

263RL

440 DEPTH MICROMETERS

• The depths of holes, slots, shoulders and projections can be measured with these fine tools• 2-1/2" (63.5mm) base and 1/8" (3.2mm) diameter measuring rods• Combination ratchet and speeder for uniform pressure and quicker adjustment• Ring-type knurled lock nut for quick and sure locking

T230 OUTSIDE MICROMETER

• Extremely hard and stable one-piece spindle• Advanced sleeve design with staggered lines and

distinct figures for precise and easy readability• Balanced frame and thimble design ensure easy

handling and better readability• Gracefully designed tapered frame for use in

narrow slots and tight places

440Z-3RL

436.1RL-2

Cat. No. EDP Range Sale PriceT230XRL 50944 0-1" 235.60

Cat. No. EDP Range Sale Price263P 51251 0-1" 95.00263L 51253 0-1" 101.65263RL 51254 0-1" 106.40263MP* 51275 0-25mm 95.00263MRL* 51257 0-25mm 106.40* 0-25mm models specify clamping diameter 12 or 12.7mm sent unless otherwise ordered.

Cat. No. EDP Range Graduations Sale Price436.1RL-1 67993 0-1" .001" 142.50436.1RL-2 68002 1-2" .001" 169.10436.1RL-3 68010 2-3" .001" 211.85436.1RL-4 68017 3-4" .001" 233.70436.1RL-5 68023 4-5" .001" 254.60436.1RL-6 68029 5-6" .001" 275.50436.1XRL-1 67994 0-1" .001" 142.50436.1XRL-2 68003 1-2" .001" 169.10436.1XRL-3 68011 2-3" .001" 211.85

Cat. No. EDP Range Sale Price440Z-3L 52113 0-3" 264.10440Z-3RL 52115 3-4" 269.80440Z-6RL 52119 4-5" 322.05440Z-9RL 52123 5-6" 404.70

2 Prices effective May 15 - July 31, 2015 | Specifications subject to change.

Mic

ro

metersNew!T444 OUTSIDE MICROMETERS

• No-glare satin chrome finish which resists rust

• Advanced sleeve design with staggered lines and distinct figures for precise and easy readability

• Balanced frame and thimble design to ensure easy handling and better readability

• Insulated frame for prevention of temperature related expansion and contraction

• Provides quick and easy adjustment• Reading in ten-

thousandths of an inch (.0001") with a vernier scale on the sleeve

445 DEPTH MICROMETERS

• Depths of holes, slots, shoulders and projections can be measured to .001" (0.01mm)

• Furnished with choices of 3" (75mm), 4" (100mm), and 6" bases and have 5/32" (4mm) diameter measuring rods

• Combination ratchet and speeder for uniform pressure and quicker adjustment

• Ring-type lock nut for quick and sure locking

T444.1XRL-3445AZ-6RL

486 BLADE TYPE MICROMETERS

• The blades are.030" (0.8mm) thick

• Blades will measure to 5/16" (8mm) depths

• Balanced frame and thimble design ensure easy handling and better readability

• Speeder for quicker adjustment on all sizes

486P-5

795.1 IP67 ELECTRONIC OUTSIDE MICROMETERS WITH OUTPUT

• IP67 protection against coolants, water, chips, dust and dirt often found in machine shop environments

• Balanced frame for comfortable and accurate measuring

• Starrett No-glare satin chrome finish on thimble and sleeve minimizes annoying surface glare under bright lights indoors or filters out UV light

• Large, easy-to-read, high-contrast LCD digital readout

• Spindle lock

• Micro-lapped carbide measuring faces

• SPC output capability

795.1XFL-1

Cat. No. EDP Range Graduations Sale PriceT444.1XRL-1 52083 0-1" .0001" 114.00T444.1XRL-2 52084 1-2" .0001" 133.00T444.1XRL-3 52085 2-3" .0001" 147.25T444.1XRL-4 52086 3-4" .0001" 170.05T444.1XRL-5 52087 4-5" .0001" 184.30T444.1XRL-6 52088 5-6" .0001" 205.20

Cat. No. EDP Range Sale Price445AZ-6RL 52212 0-6" 326.80445AZ-9RL 52216 0-9" 404.70445BZ-6RL 52224 0-6" 342.00445BZ-9RL 52228 0-9" 426.55

Cat. No. EDP Range Sale Price486P-5 52507 4-5" 514.90486P-6 52509 5-6" 610.85486P-7 67094 6-7" 802.75

Cat. No. EDP Range Resolution Accuracy Sale Price795.1XFL-1 01100 0-1" .00005" ±.0001" 236.55795.1XFL-2 01101 1-2" .00005" ±.0001" 270.75795.1XRL-1 01108 0-1" .00005" ±.0001" 236.55795.1XRL-2 01109 1-2" .00005" ±.0001" 270.75

3starrett.com

Mic

ro

meters

823 TUBULAR INSIDE MICROMETERS

• Rods are rigid and lightweight• 5-1/2" (140mm) long handle furnished• Each rod is marked with length• Hardened and ground anvils• Interchangeable anvils• Quick reading figures• Extension rods are made of steel tubing

796.1 IP67 ELECTRONIC OUTSIDE MICROMETERS

• IP67 protection against coolants, water, chips, dust and dirt often found in machine shop environments

• Balanced frame for comfortable and accurate measuring• Starrett no-glare satin chrome finish on thimble

and sleeve minimizes annoying surface glare under bright lights indoors or filters out UV light

• Large, easy-to-read, high-contrast LCD digital readout• Spindle lock• Micro-lapped carbide measuring faces

796.1XFL-1

3732 ELECTRONIC MICROMETERS

• Balanced frame design for comfortable and accurate measuring

• Large, easy-to-read, high-contrast LCD digital readout• No-glare black wrinkle finish on frame• Hard and stable one-piece friction thimble permits

one-hand operation of micrometer and uniform contact pressure

3732XFL-1

823CZ

Cat. No. EDP Range Resolution Accuracy Sale Price796.1XFL-1 01104 0-1" .00005" ±.0001" 195.70796.1XFL-2 01105 1-2" .00005" ±.0001" 261.25796.1XRL-1 01116 0-1" .00005" ±.0001" 195.70796.1XRL-2 01117 1-2" .00005" ±.0001" 261.25

Cat. No. EDP Range Resolution Accuracy Sale Price3732XFL-1 12268 0-1" 0.00005" ± 0.0001" 148.203732XFL-2 12269 1-2" 0.00005" ± 0.0001" 201.403732XFL-3 12270 2-3" 0.00005" ± 0.0001" 256.503732XFL-4 12271 3-4" 0.00005" ± 0.00015" 285.95

Cat. No. EDP Range Graduations # of Rods Movement of Screw Sale Price823AZ 53050 1-1/2-8" .001" 5 1/2" 333.45823BZ 53052 1-1/2-12" .001" 8 1/2" 407.55823CZ 53054 4-24" .001" 7 1" 513.95823DZ 53055 4-32" .001" 8 1" 568.10823EZ 53056 4-40" .001" 10 1" 628.90823FZ 53058 1-1/2-32" .001" 10 1/2" and 1" 779.95823MAZ 53051 40-200mm 0.01mm 6 13mm 354.35823MBZ 53053 40-300mm 0.01mm 8 13mm 427.50823MEZ 53057 100-1000mm 0.01mm 10 25mm 627.95

4 Prices effective May 15 - July 31, 2015 | Specifications subject to change.

Slid

e C

alip

ers

New!

125 VERNIER CALIPERS

• High quality, basic vernier caliper that offers inch and metric measurement

• Lock screw for sliding jaw• Hardened stainless steel depth rod• Sharp, black graduations on the satin finished bar

799 ELECTRONIC CALIPERS

• Lightweight, ergonomic design• Last measuring position retained when shut off• Large, easy-to-read, high-contrast LCD digital readout• Inch/millimeter conversion reads .0005" or 0.01mm

3202 SLIDE CALIPERS

• Provides quick, accurate measurement of O.D. and depth

• Sharp, clear dial graduations• Sharp, black graduations on satin finished bar• Hardened stainless steel• Lock screws for sliding jaw and dial bezel

798 ELECTRONIC CALIPERS

• IP67 level of protection against coolant, dirt and dust

• Fine adjustment• Hardened stainless steel measuring surfaces• Large, easy-to-read, high contrast LCD digital readout

798A-6/150

799A-6/150

3202-6

Cat. No. EDPRange

Sale Pricein mm125MEA-6/150 61660 0-6 0-150 112.10125MEA-8/200 61882 0-8 0-200 132.05125MEA-12/300 61886 0-12 0-300 237.50

Cat. No. EDP Range Resolution Sale Price798A-6/150 20798 6" .0005" 224.20798A-8/200 20799 8" .0005" 285.00798A-12/300 20800 12" .0005" 423.70798B-6/150 12521 6" .0005" 268.85798B-8/200 12523 8" .0005" 325.85798B-12/300 12525 12" .0005" 483.55798BX-6/150 12782 0-6" .0005" 378.10

Cat. No. EDP Range Resolution Sale Price799A-6/150 67410 0-6" .0005" 170.05799A-8/200 67412 0-8" .0005" 240.35799AZ-24/600 11978 0-24" .0005" 810.35799AZ-40/1000 11979 0-40" .0005" 1,625.45

Cat. No. EDP Range Graduation Sale Price3202-6 61467 0-6" .001" 110.203202-8 61468 0-8" .001" 155.80

5starrett.com

Ind

icato

rs

647 DIAL COMPARATOR

• Effective non-shock mechanism• Pinions and shafts of the movement are jeweled• After removal of the safety cap the adjustment

screw on top of the case allows simple and safe zero setting of the instrument over the total measuring

• A safety cap prevents unintentional turning of the fine adjustment screws

25 DIAL INDICATORS

• Rugged and simple unit construction with a "universally fitting" design

• Sharp bezel serrations for positive grip• Unbreakable crystal• Hardened stainless steel stem• No-glare satin finish on case• Hardened stainless steel

rack and spindle• Massive bridge for rigid

bearing support• Hardened stainless steel

gears and pinions• Non-reflecting white

eggshell finish on dial• Jewel Bearings

647

196 UNIVERSAL BACK PLUNGER DIAL INDICATORS

• One of the most versatile indicators available• Accurate and reliable• Simple to operate• Range: .200" (5mm)• Graduations: .001" (0.02mm)

196A1Z

25-141J

657D MAGNETIC BASE

• Designed to hold lug and center back indicators• Three precision ground magnetic contact surfaces

(plus V-step)• Powerful, permanent magnetic base hold firmly

to steel or iron surfaces - horizontally, vertically, upside-down

• The swivel post assembly on these holders provides universal adjustment in both horizontal and vertical planes

• Includes magnetic base with attachments: swivel post snug and gage holding rod

Cat. No. EDP Dial Reading Range Grads Sale Price25-141J 53240 0-50-0 .250" .001" 161.5025-341J 53287 0-50-0 1.000" .001" 161.5025-441/5J 53293 0-100 .500" .001" 161.5025-441J 53295 0-100 1.000" .001" 161.5025-631J 53304 0-50 1.000" .0005" 187.1525-2041J 53309 0-100 2.000" .001" 313.50

Cat. No. EDP Reading Sale Price196A1Z 50697 0-100 264.10196MA1Z 65251 0-100 Yellow dial face 273.60196MB1 65252 0-100 Yellow dial face 176.70

Cat. No. EDP Range Graduation Reading Sale Price647 00001 .004" .00005" 20-0-20 243.20647M 00002 0.1mm 0.001mm 50-0-50 243.20

Cat. No. EDP Sale Price657D 52749 239.40

6 Prices effective May 15 - July 31, 2015 | Specifications subject to change.

Ind

icato

rs

657T AND 657TW MAGNETIC BASE

• For use with all Starrett Test, AGD, Dial and Miniature Dial Indicators

• Accommodates similar indicators of other manufacturers

• Includes Flex-O-Post assembly• Flexible post can be

adjusted to any position and locked by turning a lever

657T

New!659A HEAVY DUTY MAGNETIC BASE

• Has approximately twice the holding power of our 657 Magnetic Base and has a rotary on/off switch

• Post snug with two 3/4" / 19mm holes positions the dial indicator at any height, vertical angle and allows for 360 degree rotation of the gage rod

• Includes magnetic base, upright post assembly including post, snug, gage rod with clamp and find adjust, and thread adaptor without case

660 MAGNETIC BASE

• Compact and versatile, with three adjustable pivots controlled by a single knob for fast, easy indicator positioning

S668 SHAFT ALIGNMENT CLAMP

• Lightweight clamp design made of black anodized aluminum

• Rigid 3/8" diameter stainless steel indicator posts provided in three lengths (5", 7-7/16", and 9")

• Extension plate allows for added radial clearance• Heavy-duty roller chain can accommodate up to a

7-1/2" diameter shaft• Set comes with two Starrett Indicators• Excess roller chain can be secured to the side of

the chain clamp• A second shaft alignment clamp can be mounted

across from the first clamp to act as a vertical "target" for face alignment

668CZ

696Z CRANKSHAFT DISTORTION DIAL/STRAIN GAGE

• The dial indicator movement is approximately 5/32" (4mm)

• There are 10 rods and one extension furnished• Rods are marked to designate the approximate

overall length of the gage• Movable bezel adjusts the dial in relation to the hand• Non-breakable crystal• Gage is used by their inspectors to check the

distortion of engine shafts and frames

Cat. No. EDP Sale Price657T 52760 285.95657TW 52761 337.25

Cat. No. EDP Sale Price659A 56687 596.60

Cat. No. EDP Sale Price660 68621 132.05

Cat. No. EDP Indicators Sale PriceS668CZ 67152 196B5 988.95S668DZ 67153 81-141J 1,064.95

Cat. No. EDP Range Sale Price696Z 52901 2 3/8"-18" (61-458mm) 655.50

7starrett.com

Ind

icato

rs

F2730IQ, F2740IQ, F2750IQ INDICATORS

• Rugged, sealed enclosures as standard• American designed and manufactured• Power with Batteries• Additional Power Options Through AC Jack or Data Output• Programmable Lock Combination• User Tolerance Settings

(high and low)• Up to 4 User

Changeable Resolutions• Large LCD Display• Maximum Reading Hold• Display / Freeze Reading

Hold• Minimum Reading Hold

1175Z DIAL INDICATOR GROOVE GAGE

• The reference jaw can be mounted in two positions on the range adjusting bar

• Adjustable bar for greater or lesser range• A fine adjustment screw and a lock provided• Two sets of jaws, both readily interchangeable• Three sets of contacts (Styles 1-10, 2-10, 2-20) • Contacts can be attached to the jaws without

replacing the jaw.• Contact ends are flush for blind hole gaging• Hardened steel contacts with hard chrome finish

711LCSZ LAST WORD TEST INDICATOR

• Their small size and variety of attachments will handle all jobs with ease and accuracy

• Shaded dial – for use with a mirror, in a jig bore application, the operator will always know the correct reading

• Variety of attachments available to suit the application• Hard chrome-plated ratchet contact point• Smooth, jeweled lever action• Swiveling tubular body• Positive reversing switch• Indicator

complete with all attachments

1010 DIAL INDICATOR POCKET GAGES

• Throat depth ranges from1/2" (12.7mm) down to 5/16" (8mm)

• Models are available with rounded contacts• The diameter of both the flat or round contacts are

1/4" (6.3mm)• Gage has a small count hand for recording each

revolution of large hand• Chrome plated case, unbreakable crystal dial cover

1010Z

F2730IQ

Cat. No. EDP Sale Price711LCSZ 52957 278.35

Cat. No. EDP Range Graduation Contacts Sale Price1010Z 53114 .375" .001" Flat 342.951010EZ 53115 .375" .0005" Flat 363.851010MZ 53116 9mm 0.01mm Flat 378.10

Cat. No. EDP Range Grads Sale Price1175Z 53173 .375"-6" .0005" 2,168.85

Cat. No. EDP Range Resolution Sale PriceF2730IQ 49509 1" (25mm) .00005" (0.001mm) 551.95F2740IQ 49510 2" (50mm) .0001" (0.002mm) 832.20F2750IQ 49511 4" (100mm) .0001" (0.002mm) 1,260.65

8 Prices effective May 15 - July 31, 2015 | Specifications subject to change.

Ind

icato

rsNew!2900 ELECTRONIC INDICATORS

• True Absolute Sensor Technology - remembers position and zero set point even during battery replacement. Cannot be "over-sped" into failure.

• Intuitive design and layout - easy to learn and use• Positive, tactile-feel button activation• IP67 protection against dirt, dust, water and coolant to withstand hostile shop environments

2900-1

New!

New!

3670 DIAL INDICATOR STANDS

• Designed for comparison measurements using a dial indicator or digital indicator• Vertical fine adjustment is standard on all models• Rugged bracket holds indicator firmly in place• Can be used with any AGD dial or digital indicator• Furnished with a serrated or flat anvil which is ground and lapped and removable

3808, 3809, 3908 AND 3909 DIAL TEST INDICATORS

• Three dovetail positioning mounts work with most existing test indicator accessories• Precision gear-driven design with smooth, jeweled movement• Contact point reverses automatically, always maintaining clockwise hand rotation• Contacts are frictionally adjustable and replaceable

3671

3808A

Indicator not included

Cat. No. EDP Range Resolution Accuracy Sale Price2900-1 09980 .5" .00005" ±.00012" 342.002900-2 09981 .5" .0001" ±.00012" 308.752900-4 09983 .5" .0005" ±.001" 438.902900-6 09985 .5" .0005"/.0001"/.0005" ±.00012" 518.702900-3-1 09963 1" .0005" ±.001" 308.752900-5-1 09967 1" .0005" ±.001" 438.90

Cat. No. EDP Description Sale Price3671 69901 Stand with round flat anvil 557.653672 69902 Stand with round serrated anvil 557.653673 69903 Stand with square serrated anvil 557.65

Cat. No. EDP Range Graduation Reading Sale Price3808A 12331 .008" .0001" 0-4-0 160.553808AC 12303 .008" .0001" 0-4-0 223.253809A 12333 .030" .0005" 0-15-0 104.503809AC 12305 .030" .0005" 0-15-0 152.953908A 12488 .008" .0001" 0-4-0 172.903908AC 12636 .008" .0001" 0-4-0 233.703909A 12527 .030" .0005" 0-15-0 115.903909AC 12669 .030" .0005" 0-15-0 164.35

9starrett.com

Surface Roughness

Testers

SR100 SURFACE ROUGHNESS TESTER

The SR100 Surface Roughness Tester is powerful, accurate and easy to use. It is ideal for checking large components, structures, auditing batch prior to shipment and production line process control.

PRICE $1,783.15

SR300 AND SR400 SURFACE ROUGHNESS TESTER

The SR300 Surface Roughness Tester is a full-featured, powerful and versatile surface roughness tester. It can be used either freestanding or bench mounted with fixturing for batch measurement and laboratory applications.

SR300 PRICE $3,271.80SR400 PRICE $4,151.50

WATCH OUR INFORMATIONAL VIDEOS TO LEARN MORE ABOUT OUR SURFACE ROUGHNESS TESTERS!

Depth a

nd

Ho

le G

ages

3753 ELECTRONIC DEPTH GAGE

• Clear, easy-read numbers, properly sized for the tool• Hardened stainless steel body and slide for long life• Fine adjustment thumb roll for precision measurements• Lock to hold the slide in position

3753A-8/200

643JZ DIAL DEPTH GAGE

• Hardened, ground needle point contact• Knife-edge base which can be precisely positioned for close work• Point is 1/2" (17.7mm) long with a 40 degree included angle• Case is included• 0-.125" Range• .0005" Graduation• 0-25-0 Dial Reading

829 HOLE GAGES

• Ideal for accurately measuring small holes, slots, grooves, and recesses• Precision Ground Radius on each gage provides two-point contact for

maximum accuracy• Well balanced• More accurate measurements• Hardened-ball measuring surface with two-point contact• Full-ball gages• Smooth, sensitive adjustment

Cat. No. EDP Range Resolution Accuracy Sale Price643JZ 52714 0-12" .0005" ±.001" 428.45

Cat. No. EDP Range Resolution Accuracy Sale Price3753A-6/150 12258 0-6" .0005" ±.001" 307.803753A-8/200 12259 0-8" .0005" ±.001" 321.103753B-6/150 12690 0-12" .0005" ±.001" 383.80

Cat. No. EDP Range Sale PriceS829EZ 53074 .125-.5" 177.65

12 Prices effective May 15 - July 31, 2015 | Specifications subject to change.

Bo

re a

nd

Ho

le G

ages

New!84A DIAL BORE GAGES

• Can be easily held to inspect bores and hole sizes without removing the workpiece

• Adjustable range screw and two centralizing plungers provide accurate, three-point contact for alignment in larger bores

• All contacts and centralized plungers are of hardened tool steel for wear and spring-loaded for sensitivity

• The housing and knurled handle are aluminum for light weight and good balance

• Furnished in finished wood case

3089 DIAL BORE GAGES

• All anvils laser marked for easy selection• Gage chart for quick and easy anvil selection• Includes sturdy aluminum case with cut

outs for gage and all accessories• Ergonomic design with non-slip

insulating grip• Resolution: .0005"

780 ELECTRONIC BORE GAGES

• Wide measurement range without changing anvils

• Carbide measuring faces on sizes 1/2" (12.5.mm) diameter

• Extension available for deep holes• Precision ratchet stop provides correct contact

pressure for accurate readings• Resolution: .00005" (0.001mm)• Large high-contrast LCD digital readout is easy to

read and reduces error

3089Z-131-715J

78 BORES GAGES

• Wide measurement range without changing anvils• Tungsten carbide measuring faces• Ratchet stop• Self-centering contacts • Blind bore measuring capability• Extensions available up to 6" (150mm) • Setting rings included• Furnished in a case, complete with setting ring,

contacts, wrenches, and instructions

78XTZ-2 780XTZ-312

84AZ-111-5J

Cat. No. EDP Range Grads Bore Depth Sale Price78XTZ-750 68133 5/8 - 3/4" .00025" 2-7/16" 734.3578XTZ-1 68134 3/4 - 1" .00025" 2-5/8" 828.4078XTZ-2 67675 1-3/8 - 2" .00025" 3-1/16" 1,171.3578XTZ-258 67676 2 - 2-5/8" .00025" 3-1/16" 1,439.2578XTZ-5 67679 4 - 5" .00025" 4" 1,988.35S78XTEZ 67683 3/4 - 2" .00025" 2-5/8"-3-1/16" 3,247.10S78XTFZ 67684 2 - 4" .00025" 3-1/16 - 4" 4,412.75

Cat. No. EDP Range Bore Depth Sale Price84AZ-111-4J 00026 1-1/2-3" 3" 1,182.7584AZ-111-5J 00027 3-5-1/16" 6" 1,166.6084AZ-134-5J 00031 3-5-1/16" 6" 1,122.9084AZ-111-6J 00028 5-8" 6" 1,296.7584AZ-134-6J 00032 5-8" 6" 1,179.9084AZ-111-7J 00029 8-12-1/2" 7" 1,482.9584MAZ-181-4J 00038 3.175-76.2mm 75mm 1,207.4584MAZ-161-5J 00035 76.2-128.58mm 150mm 1,177.05

Cat. No. EDP Range Accuracy Sale Price780XTZ-312 12021 1/4"-5/16" ±.00015" 2,126.10780XTZ-375 12022 5/16"-3/8" ±.00015" 2,133.70780XTZ-500 12024 3/8"-1/2" ±.00015" 2,103.30780XTZ-625 12025 1-2"-5/8" ±.00015" 2,127.05780XTZ-750 12026 5/8"-3/4" ±.00015" 2,180.25780XTZ-1 12027 3/4"-1" ±.00015" 2,553.60780XTZ-138 12028 1-1-3/8" ±.00015" 3,015.30780XTZ-2 12029 1-3/8"-2" ±.00015" 2,979.20780XTZ-258 12030 2-2-5/8" ±.00020" 3,399.10780XTZ-314 12032 2-5/8"-3-1/4" ±.00020" 3,311.70780XTZ-4 12033 3-1/4"-4" ±.00020" 3,682.20780XTZ-5 12034 4"-5" ±.00025" 3,835.15780XTZ-6 12035 5"-6" ±.00025" 3,961.50780XTZ-9 12038 8"-9" ±.00030" 5,574.60S780XTCZ 12044 1/4"-3/8" ±.00015" 2,946.90S780XTDZ 12045 3/8"-3/4" ±.00015" 3,560.60S780XTEZ 12046 3/4"-2" ±.00015" 4,665.45S780XTFZ 12047 2"-4" ±.00020" 5,330.45S780XTKZ 12049 4"-6" ±.00025" 4,581.85

Cat. No. EDP Range Sale Price3089Z-131-715J 12456 0.7"-1.5" 256.503089Z-131-1424J 12457 1.4"-2.4" 256.503089Z-131-26J 12458 2"-6" 285.95

13starrett.com

Gage A

mps a

nd

Testers

New!

New!SR100 SURFACE ROUGHNESS TESTER

• Measures basic Ra, Rz and advanced Rp,Rv and Rt parameters

• Switches between inch and metric mode without remeasuring

• Automatic shut-off after five minutes of inactivity • Uses CR2450 batteries• Two-piece assembly, calibration

standard, batteries, operation guide and a carrying case

• Infra-red (IrDA) link provides remote, cable free operation up to a distance of 40"

SR300 AND SR400 SURFACE ROUGHNESS TESTER

• Large screen display • Unique stylus lift mechanism for total flexibility • Many application specific parameter options • Comprehensive selection optional accessories

and pickups • Long traverse length and extended pickup reach • Stores of up to 100 readings

3810A DIGITAL PORTABLE HARDNESS TESTER

• Combines fast test speeds coupled with ample memory and output

• Performs tests that easily convert to most popular hardness scales such as Rockwell, Brinell, Vickers and Shore

• Designed to test the hardness of large, hard metal parts • USB output • Automatic conversions to

Rockwell Brinell, Vicker and Shore

• Automatic mean value as well as Min and Max values

3812 ULTRASONIC THICKNESS GAGE

• Menu-driven, multi-functional tester with basic measurement capabilities

• Measures the thickness of metallic and non-metallic materials such as aluminum, titanium, plastics, ceramics and glass

• Accurately display readings in inch or millimeter

• Ideal for measuring a wall thickness that would be difficult to gage with conventional hand tools

3811A COMPACT HARDNESS TESTER

• Combines fast test speeds coupled with ample memory and output

• Performs tests that easily convert to most popular hardness scales such as Rockwell, Brinell, Vickers and Shore

• Designed to test the hardness of large, hard metal parts • USB output • Automatic conversions to

Rockwell Brinell, Vicker and Shore

• Automatic mean value as well as Min and Max values

3814 ANALOG BENCH HARDNESS TESTER

• Ability to handle Rockwell Scales A through H and K

• Stable cast iron construction• Ideal basic hardness testing

for many typical applications

SR300

Cat. No. EDP Sale Price3814 67754 3,051.40

Cat. No. EDP Sale Price3812 67668 1,283.45

Cat. No. EDP Sale Price3811A 69881 1,722.35

Cat. No. EDP Sale PriceSR100 20950 1,783.15

Cat. No. EDP Sale PriceSR300 21000 3,271.80SR400 21001 4,151.50

14 Prices effective May 15 - July 31, 2015 | Specifications subject to change.

Precis

ion

Ru

les A

nd

An

gle M

easu

rem

en

t

C305 PRECISION RULES

• Full-Flexible• Satin chrome finish• Quick Reading• 1/2" wide• Rules with single row of inch figures (all rules under 1" width)

C604R PRECISION RULES

• Spring-Tempered• Satin chrome finish• Quick Reading• Rules with double row of inch figures, and each

edge represents the bottom edge reading left to right (rules 1" and wider)

154 ADJUSTABLE PARALLELS SET

• Adjustable feature makes it possible to adjust to exact size by micrometer measurement and also permits use in place of several solid-type parallels

• These parallels are useful as gages in checking the size of slots and openings• Convenient for use in machine vises, for leveling or adjusting work on setups of milling and grinding machines,

shapers, planers and drill presses• Parallels slide smoothly and can be easily adjusted• All parallels are 9/32" (7mm) thick

S154LZ

C305R-6

C604R-6

Cat. No. EDP Range Thickness Description Sale PriceS154SZ 50584 3/8" - 1-5/16" 9/32" (7mm) Set of 4 paralells and case 166.25S154LZ 50586 3/8" - 2-1/4" 9/32" (7mm) Set of 6 paralells and case 279.30

Cat. No. EDP Description Graduations Sale PriceC305R-6 51347 6" full-flexible steel 5R - Quick-Reading 10ths, Aircraft Quick-Reading 100ths, 32nds and 64ths 25.65C305R-12 51348 12" full-flexible steel 5R - Quick-Reading 10ths, Aircraft Quick-Reading 100ths, 32nds and 64ths 52.25C305R-24 51350 24" full-flexible steel 5R - Quick-Reading 10ths, Aircraft Quick-Reading 100ths, 32nds and 64ths 115.90

Cat. No. EDP Description Graduations Sale PriceC604R-6 52678 6" spring-tempered steel 5R - Quick-Reading 10ths, Aircraft Quick-Reading 100ths, 32nds and 64ths 25.65C604R-12 52679 12" spring-tempered steel 5R - Quick-Reading 10ths, Aircraft Quick-Reading 100ths, 32nds and 64ths 43.23C604R-18 52680 18" spring-tempered steel 4R – 8ths, 16ths, Quick-Reading 32nds and 64ths 82.65C604R-24 52681 24" spring-tempered steel 5R - Quick-Reading 10ths, Aircraft Quick-Reading 100ths, 32nds and 64ths 108.30

15starrett.com

Fix

ed

Gage S

ta

nda

rd

s

270 TAPER GAGE

• Very useful tool for bearing work and for gaging slots• Made of quality tool steel and accurately

tapered throughout entire length for quick and convenient measuring

• 7/16" (11mm) wide by 6-1/4" (160mm) long• Can be used as a precision shim• One side graduated from .010" to .150" in

thousandths of an inch; the reverse side from 0.3mm to 4mm in one-twentieth of a mm (0.05mm)

467 INCH READING THICKNESS GAGE

• Compact steel case • Locking device to lock any leaf or leaves in position • 13 leaves ranging from .0015 to .200" thickness • Tempered steel• Straight leaves

66 THICKNESS GAGE

• Tempered-steel, carefully finished to correct thickness• Individually tested and marked with thickness• Leaves easily removed or replaced• Rugged, substantial steel case protects leaves• Straight Leaves• Leaves made of finest tempered-steel• Locking device

245 ENGINEERS' COMBINATION TAPER, WIRE AND THICKNESS GAGE

• Compact steel case• Locking device to lock any leaf or leaves in position• English Standard wire gage, sizes numbered from

19-36 (.042-.004"), plus two additional sizes, 1-16" and 1/8"

• The reverse side has decimal equivalents in thousandths

• Has eleven thickness or feeler leaves

66 245

Cat. No. EDP Leaves Range Sale Price66 50314 26 Straight, English .0015 - .025" 66.5066T 50315 26 Tapered, English .0015 - .025" 74.1066B 57097 31 Straight, English .0015 - .025" 74.1066MA 55974 20 Straight, Metric 12.7 - 77mm 66.50

Cat. No. EDP Description Sale Price

245 51170With taper gage, English standard wire gage and 9" reading thickness gage leaves

172.90

245M 51171With taper gage, English standard wire gage and 11mm reading thickness gage leaves

198.55

Cat. No. EDP Description Sale Price270 51292 English/Metric 125.40

Cat. No. EDP Description Sale Price467 52464 Inch reading thickness gage, 13 leaves 102.60

16 Prices effective May 15 - July 31, 2015 | Specifications subject to change.

Fix

ed

Gage S

ta

nda

rd

s

666 THICKNESS GAGE "FEELER STOCK" IN ROLLS

• In a compact, sturdy plastic rewindable dispenser case. This case handles stock up to .015" and 0.35mm only.• Roll stock in thickness of .016" or 0.40mm and over is furnished in 20' or 6m (non-dispensable) rolls in

cardboard box • Housed in convenient, rewindable dispenser rolls• Handy 25' and 7.6m rolls 1/2" and 12.7mm wide

579 TELESCOPING GAGE SETS

• Precision ground radius on each gage provides two-point contact

• Constant spring tension • Lockable• Handles are attached to the contact plungers and

automatically self-center• Two telescoping contacts

806 THICKNESS GAGE HOLDERS

• Stock up to 6" (150mm) is inserted in the holder and gripped in the desired position by a cam lock

• Can be snipped off and new stock pulled out until used up

• Dull nickel finish• 806D Clamps have contrasting finish to eliminate

the possible confusion on which end holds the thicker or thinner stock

806D

S579GZ

666-1

Cat. No. EDP Thickness Sale Price666-1/2 64210 .0005" 263.15666-1 52796 .001" 111.15666-1 1/2 52797 .0015" 57.00666-2 52798 .002" 57.00666-3 52800 .003" 59.85666-4 52801 .004" 41.80666-5 52802 .005" 41.80666-6 52803 .006" 41.80666-10 52807 .010" 38.00666-15 52812 .015" 38.00666M-3 52823 0.03mm 125.40666M-5 52825 0.05mm 66.50666M-10 52828 0.10mm 50.35

Cat. No. EDP Range Description Sale PriceS579GZ 52616 5/16" - 2-1/8" Set of 4 gages and case 161.50S579HZ 52617 5/16" - 6" Set of 6 gages and case 279.30

Cat. No. EDP Description Gages Sale Price806 53039 Single Holder 26 31.83806D 53040 Double holder 26 35.63

17starrett.com

Precis

ion

Sho

p T

oo

ls

91 TAP WRENCH

• Strong and well-proportioned• Tempered gripping surfaces firmly hold square or round shanks• Plunger operated by knurled sleeve• Spring inside sleeve causes plunger to back off when pressure is removed• Round shanks can be gripped, but care must be used. Excessive pressure may break the movable V-jaw

18 AUTOMATIC CENTER PUNCHES

• All-steel handles and parts• Automatically strikes a blow when downward

pressure is applied• Spring tension• The point can be easily be replaced• Adjustable cap regulates the force of action

818 AUTOMATIC CENTER PUNCH

• Full-Flexible• Satin chrome finish• Quick Reading• 1/2" wide• Rules with single row of inch figures

(all rules under 1" width)

93 TAP WRENCH

• For holding taps, drills, reamers and small tools • Properly centered • Wrenches have sliding handle • Designed to hold square shanks

565 DRIVE PIN PUNCH

• Hardened and tempered steel• Knurled grip• Punch material available in hardened/

tempered steel and brass• Round and square shanks available• Available tips include center, prick and

drive pin• Tip diameters range from 1/32" to 38"

18C

91BCat. No. EDP Capacity Tap Size Body Length Square Shank Sale Price91A 50419 1/16-1/4" (1.6-6.35mm) 6" (150mm) 3/32-5/32" (2.4-4mm) 52.2591B 50420 3/16-1/2" (4.7-12.7mm) 9" (225mm) 5/32-9/32" (4-7mm) 76.9591C 50421 1/4-5/8" (6.35-16mm) 12" 300mm 5/32-3/8" (4-9.5mm) 123.5091D 50422 5/16-3/4" (8-19mm) 16" 400mm 13/64-7/16" (5.2-11mm) 164.35

Cat. No. EDP Body Length Diameter Sale Price18A 50120 5" (125mm) 9/16" (14mm) 43.7018AA 12473 4" (100mm) 7/16" (11mm) 39.4318C 56757 5 1/4" (130mm) 11/16" (17mm) 53.20

Cat. No. EDP Capacity Tap Size Body Length Sale Price93C 50429 1/4-1/2" (6.4-12.7mm) 3-1/2" (90mm) 52.25

Cat. No. EDPLength Diameter Punch

Sale Pricein mm in mm565A 52578 4 100 1/16 1.5 6.56

Cat. No. EDP Body Length Diameter Sale Price818 53048 5" (130mm) 5/8" (16mm) 38.95

18 Prices effective May 15 - July 31, 2015 | Specifications subject to change.

Precis

ion

Sho

p T

oo

ls

828 WIGGLER OR CENTER FINDER WITH ATTACHMENTS

• Working centers can be quickly and accurately located• Spring tension on the ball of the point permits guiding point

to concentricity• Ball Contact 828B is useful in locating work by first bringing

the contact (ball diameter .250" or 6.35mm) against the work • Disc Contact .100" (2.54mm)

diameter, permits use in more confined areas such as slots or shallow holes

• Offset Indicator Holder can be used with Starrett Test Indicators

98 MACHINISTS' LEVEL WITH GROUND AND GRADUATED VIALS

• This level has ground and graduated main vial• The base of the level feature an involute

groove running the length of the base, which provides a reliable seat for round work

• The vial is adjustable to a positive setting and is housed in a satin finished brass tube with a friction-fit closing cover to prevent breakage

• Wood case

827 EDGE FINDER

• Single End • Work surfaces may be located easily, quickly and accurately

with these edge finders• Flats, straight edges, shoulders, grooves, round work, studs,

dowels, center points and scribed lines - all can be accurately located with this tool

• Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity

• Furnished in attractive, protective case

199 MASTER PRECISION LEVEL

• Ground and graduated main vial of 10-second accuracy; one division equals 1/2 thousandth (0.0005) of an inch per foot, or 0.04mm per meter

• Main vials have seven graduations on each side of the bubble

• Special alloy iron used to obtain freedom from thermal effects

• Seasoned, machined castings

Cat. No. EDP Description Body Diameter Contact Diameter Sale Price827A 53062 Single end .375" .200" 27.55

Cat. No. EDPSize

Sale Pricein mm98Z-12 50444 12 300 322.05

Cat. No. EDP Description Sale Price

S828HZ 53064Wiggler/center finder with case and 4 attachments - 828B, C, D, PT09186

64.60Cat. No. EDP

SizeSale Pricein mm

199Z 50719 15 340 942.40

19starrett.com

PROMO 2015.1C

Promo 2015.1C 04/15 10M/Q The L.S. Starrett Company 2015© Specifications subject to change.Promotion valid through May 15 - July 31, 2015.starrett.com

THE L.S. STARRETT COMPANY OF CANADA LTD.

Phone: (905) 624-2750 | Fax: (905) 624-09011244 Kamato Road - Mississauga, Ontario L4W 1Y1 - Canada