project report by nilesh c. rathod
DESCRIPTION
swaraj engineering worksTRANSCRIPT
Marathwada Shikshan Prasarak Mandal’s
Deogiri Institute of Engineering and Management Studies, Aurangabad
A
Summer Training Project Report
At
“SWARAJ ENGINEERING WORKS”
Submitted by
Mr. Nilesh Chandrakant Rathod
Roll no. M-45
MBA III semester
Batch 2013-2015
In partial fulfillment of the completion of the course of
Dr. Babasaheb Ambedkar Marathwada University, Aurangabad
1
Marathwada Shikshan Prasarak Mandal’s
Deogiri Institute of Engineering and Management Studies, Aurangabad
A
Summer Training Project Report
At
“SWARAJ ENGINEERING WORKS”
Submitted by
Mr. Bhushan V. Pande
Roll no. M-15
MBA III semester
Batch 2013-2015
In partial fulfillment of the completion of the course of
Dr. Babasaheb Ambedkar Marathwada University, Aurangabad
Prof. Dasare Mangesh Prof. Rupesh Rebba Dr. Ulhas Shiurkar
Project Guide HOD Director
2
ACKNOWLEDGEMENT
I, MR. NILESH C. RATHOD thanks to my project guide “MR. SUNIL GUMPHEKAR” His expertise was invaluable during each step of the project from narrowing the scope of the research to theoretical development and analysis.
I also thank Prof. Dasare Mangesh (Project Guide), Prof. Rupesh Rebba (H.O.D.) and Dr. Ulhas Shiurkar (Director), Deogiri Institute of Engineering and Management Studies, Aurangabad for encouraging and guiding me through the summer training project.
Mr. Nilesh C. Rathod
Roll no. M-45
MBA III semester
Batch 2013-2015
3
CERTIFICATE
This is to certify that, Mr. Nilesh C. Rathod, a student of Deogiri institute of Engineering & Management Studies, Aurangabad Batch 2013-2015, has duly completed his Summer Training Project (CP-304). And has submitted satisfactory report to Dr. Babasaheb Ambedkar Marathwada University, Aurangabad, in partial fulfillment of Masters of Business Administration course.
We wish him all the best for future Endeavor.
Prof. Dasare Mangesh Prof. Rupesh Rebba Dr. Ulhas Shiurkar
Project Guide HOD Director
4
DECLARATIONS
I Mr. Nilesh C. Rathod hereby declare that I have formed, completed and written the Summer Training project report on 'Swaraj Engineering Works'.
It has not been previously submitted for the basis of the award of any degree or other similar titles of this or any other examining body or university.
Place:- Aurangabad Name:- Nilesh C. Rathod
Date:- Roll No. M-45
MBA IIIrd Sem
Batch 2013-2015
5
Certificate
6
Index
Sr. No. Particulars Page No.
1. Introduction of Implant Training 81.1 Need1.2 Scope1.3 Objective2. Company and Product Profile 9
2.1 Mission2.2 Vision2.3 Objective3. Product Profile 124. Departments
Finance 13Human Resource 17Production and Quality 22Plant Engineering 34
5. SWOT analysis 376. Suggestion 387. Limitation 398. Conclusion 409. Bibliography 41
7
Introduction of Implant Training
Need:
For any MBA Student, a learning combination of theory and practice is an invaluable asset, as it helps in understanding the core principles of business by way of first hand experiences. This implant training is a stepping stones, which will groom me for my future in the industrial world.
Scope of Study:
One objective implant training is to help the student bridge the gap
between academic theory and practical application and allow you the
opportunity to explore a career in any field.
To obtain knowledge of the organization structure and operations. To
observes the condition of the different departments and the opportunities
that are available.
Implant training provides opportunity to interact with people who have
the inside track and chance to build network within industry.
The main reason behind making or researching this project is to know
how the management works out to their employees and their main motto is
that
Achieve goals Gain a positive perspective Create the power to change Build self-esteem and capability Mange their own development
8
Objective of my implant training:
To get an industrial exposure.
To be aware of the happening in a particular industry.
To learn functioning and operation of different department in an
organization.
To get knowledge about the working culture of the live store.
To meticulously keep a watch on various policies been planned and
implanted in an organization.
To get deep knowledge about processing activity, product, how to
maintain quality of product, manage employees, maintain and
improvement finance performance.
Understand the customer and staff behavior.
To learn about group dynamics as well as group cohesiveness.
9
COMPANY PROFILE
10
Company and Product Profile
Swaraj Engineering Works are one of the renowned Steel fabricators,
engaged in Pre-Engineering Steel Fabrication, Building Erection Works,
Structural Fabrication, Industrial Piping, Factory Construction (including
roofing and cladding), and Customized Industrial Fabrication Work.
The company began its engineering activities in 1985 by Shri Sunil
Gumphekar with a small infrastructural set up and a vision to grow. Our
contracting division has contributed in building numerous structures.
Thereafter the company has developed resources, expertise and
infrastructure. With our vision to grow we entered in manufacturing with a
diverse range of products such as Heavy Machining, Semi -finished and
Finished automotive components, Sugar Factory Equipments ,Material
Handling Equipments, Machine Components , Jigs & Fixtures, Press
Components, Sheet Metal Components, etc.
MISSION AND VISION
MISSION:
We at Swaraj engineering works are committed to enhance customer satisfaction.
VISION:
“To become one of the renowned Steel fabricators, engaged in Pre-
Engineering Steel Fabrication.”
11
Certifications & Achievements:
ISO9001 2008 CERTIFICATION.
FOLLOWING ‘5 S’ PRACTICES FROM 2006.
VENDOR RATING ‘A’ FROM BAJAJ AUTO LTD.
SAFTY PRACTICES RECOGNITION BY OUR VALUABLE CLIENTS FOR
ZERO ACCIDENTS.
Product Catalog:
1. Heavy Structural Fabrication
2. Heavy Machine Shop
3. CNC Machine components
4. Machine Shop
5. Material Handling Equipments
6. Jigs and Fixtures
7. Press Components
8. Press Tools
12
DEPARTMENTS
A. FINANCE DEPARTMENT
The finance part can be defined as procurement of funds and their effective utilization in the business. Finance area covers financial planning forecasting receipts and disbursement realizing of funds, use and allocation of funds and financial control through budgets and other devices of financial control, the financial manager attempts to bring performance closer to the targets. The main objective of this finance area is to use business funds in such a way that the earnings are maximized. These are various decisions will have to take into consideration the commercial strategy of the business. The finance area provides a framework for selecting a proper course an action and deciding a viable commercial strategy. The main objective of business is to maximize the owner's economic welfare.
In the light of broader scope of finance area, it includes the judgment about whether a company should hold, reduce or increase the investment in various assets. A finance function is most important of all business functions. It remains focus of all activities. It is not possible to eliminate or substitute this function because the business will close down in the absence of finance. The need of money is continuous. It starts with the setting of an enterprise and remains at all times. The development and expansion of business rather needs more commitment for funds. The funds will have to be raised from different sources. The source will be selected in relation to the implications attached to them. The receiving money is not enough, utilization is more important.
The money once returned will have to be returned also. If its use is proper then its return will be easy otherwise it will create difficulties for payment. The management should have an idea of using the money profitably. It may be easy to raise funds but it may be different o repay them. The inflow and outflow of funds should be properly matched.
13
Finance:
Finance department is the starting point of every economic activity. It is called as science of money. Finance is the basic requirement of every business activity and therefore it is rightly called the life-blood of business.
Finance is essential for effective and smooth running of business. It has been termed as universal lubricant which makes an enterprise dynamic. Without the initial capital no business can be started. Nor can any business be run without the necessary liquidity. Thus sitting in a single place the finance department takes care of the entire functioning.
FUNCTIONS OF FINANCE DEPARTMENT:-
1) The Finance department distributes the various required budgets to various departments. The corporate most probably decides the budgets.
2) The departments submit the required amount along with the reasons and utilities.
3) The Finance then projects the budget for the year and distributes the designated amounts.
4) Finance department collects information from various departments in an organization about funds requirement for projects.
5) Thus, sitting in a single place the finance department takes care of the entire functioning. It is the responsibility of the finance manager to ensure that there is enough liquidity in the company for any emergencies.
6) The variance payments to be made are handled by the finance. The cash is managed and control by the finance. The payments are in the nature of cherubs.
7) All these responsibilities rest with this department and are to be carried out with extreme secrecy. The other facilities may need sudden amounts without any prior notice. The documentation is extremely essential which is
14
taken care of by this department. There are invoices for every transaction. These are maintained and recorded.
8) Thus is clear from the above stated functions that the finance handles accounting, costing, taxes, and payments. This department functions under complete secrecy. The profit earned and the losses incurred are to be balanced and the essential liquidity has to be maintained.
9) The business is thus run with all the financial functions.
The other functions of functions of finance To process bill payments. may be stated as:-
1) To develop MIS accounting.
2) To assist in consolidation of a counts and finalization of factory accounts.
3) To evaluate raw material and finish product accounting.
4) To process supplier, employees, and other plant bills.
5) To carry out cost accounting.
6) To take care of the work contract tax.
7) To manage sale tax issues.
8) To calculate tax deduction at source.
9) To calculate tax on collection.
SECONDARY FUNCTIONS:-
There are certain other functions performed at the administration level. These can be called as the secondary functions. This is essential as it is the part of the running of a metal manufacturing plant. The location of a plant, its construction, location of various departments in the plant. The location of a
15
plant, its construction, location of various departments in the plant, all this is decided and approved according to the survey. The company is required to submit the blueprints to the survey. Only after the approval the plant can be constructed. Or any changes can be made.
When any new product is to be manufactured in the plant it requires approval from the survey. The components are decided and monitored by the survey. The person handling this has to look after the Submission and essential documentation. He has to submit the forms and look into their approval.
One other such secondary function is PPC (Production Planning And Control). This involves coordinating with all the departments and arranging for the purchase of raw material, "wing of the production and the various factors involved. The production has to be panned and then executed according to plans. All this is to be continuously monitored by the PPC and controlled. The PPC has to take care of the actual difficulties arising during the Production. These may be related to the batches under production or sudden change in the rules in the packing rules. The rules involve printing of certain details on the packing. These rules involve printing of certain details on the packing. These rules change for different countries. Thus the respective measures are to be planned and executed.
16
Goals & Objectives for a Finance Department
Small businesses might not have multi-employee finance departments,
but the goals and objectives for the accounting function of any entrepreneur
should go beyond just accurate record keeping.
1) Strategic Budgeting: One of the main goals for your finance department
should be to create and monitor not only your overall company budget, but a
variety of functional or departmental budgets, as well. Budgeting requires
research to estimate accurate revenue levels based on demand forecasting.
2) Cost Containment: To ensure you get the best quality at the lowest price
for materials, supplies and services, make purchasing management one of the
duties of your finance department. Require that employees get multiple bids
or present some justification for large purchases, and have your vendors,
suppliers and contractors.
3) Cash Flow Management: Knowing when your bills are due and when you
can expect payment from customers you’ve billed or other sales revenues is
critical for any small business. It’s not enough to show a profit on paper, and
your finance function should help you manage your working capital and credit
to ensure you have enough to pay your bills at all times.
4) Debt Service: Letting your debt get out of control can have serious long-
term impacts on your business. Keep an eye on your credit use, including
interest amounts you’re generating, the scheduling of your payments and the
status of your credit report and scores.
17
5) Tax Planning: Don’t wait until the end of the year to find out what your
income tax liability is. Use proactive strategies to lower your tax burden, such
as depreciating assets and offering voluntary benefits to employees that help
you lower payroll taxes.
6) Accurate Record Keeping: The most important objective of any finance
department is to keep accurate financial records. This includes helping you
meet your legal requirements and ensuring you don’t spend more than you
have by accident. Consider external audits to prevent fraud, and institute
policies and procedures for controlling contracts and payments.
18
B. Human Resource:-
The HR department means Human Resource department, this department
plays a very vital role in any organization, and basically the term human
resource at the macro level means the total sum of all the components like
knowledge, creative ability, kills, attitude, capability possessed by all the
peoples working in organization.
Services of HR Department:-
Acts parent department of employees
For departments availability of employees
Vehicle availability
Canteen Availability
Works according to laws of government
Maintain discipline and security
Provide motivation to employees
Celebration of birthdays in organization
Recruitment and Selection
19
Administration:-
In general administration HR plays an important role. HR manager manages all the activities regarding purchase and maintenance of office equipments.
1) The HR department handles the time office. This extremely essential as
the salary or the wages are decided based on inputs. There are leave
book maintained for all the employees. These books contain the
necessary details about the leave taken by the employee such as number
of days reason or leave etc. this helps in determining the number of
working days of the employee in particular month. In case extra
working time hours there are overtime slips which are to be filled.
2) The time office also deals with the legal aspects of the employees. This
includes the wages act, factory act etc. There are many apprentices
working with the company. They should know all the practices of the
company.
3) The employees have various claims such as medical claims travelling
allowance. These are all processed by the HR.
4) If employee leaves the organization the HR conducts an exit interview
which involves the various experiences of the employee of the with the
organization.
5) Then a relieving letter is generated. The PF formalities are also
completed. The employee needs to give a prior notice of his or
scheduled leaving. The employee cannot leave without prior notice.
6) The HR department processes all the provident fund and ESCI details.
The provident fund involves the concerned deduction of the stated
20
amount from the salary of an employee. It is responsibility of HR to clear
all the dues of an employees.
7) The employee has an account with the PF. The amount deducted from
salary is deposited in this amount. There are provisions for loans. The
employee can withdraw some amount from his PF amount. The form
filled and other documentation required is to be completed by the HR
must ascertain the reasons then let the employee apply for the loan.
HR VISION:-
“Our Vision is to make our organization a great place to learn and work.
Our continuous effort is to ensure that every employee feels like an owner, to
fulfill all professional and personal goals.
Objectives and core functions of department:-
Employee Joining & Organization Development
Objective:-
Swaraj Engineering Works will not discriminate against any employee for religion, color, age etc. However, the age requirements and the language proficiency may be the decisive factors where these are the key requirements of the position.
Recruitment Resources:
Recruitment Agencies
Advertisement
References
Direct
21
Process of Joining and Living Job:-
Educational Certificate
Leaving Certificate
Experience Certificate of all previous employer
Proof of last salary drawn.
OTHER FUNCTIONS SUCH AS:-
Monthly man power reporting
Daily manpower checking
PF
Salary updating
Leave Posting
Lunch facility
Salary Format:-
Earning:
Basic Salary
Basic arrears
Other allowance
Deduction:
PF contribution
Income & professional Tax
Canteen
22
C. Production and Quality
Production and Operation Department:
Production and Operations Management ("POM") is about the transformation of production and operational inputs into "outputs" that, when distributed, meet the needs of customers.
POM incorporates many tasks that are interdependent, but which can be grouped under five main headings:
PRODUCT
Marketers in a business must ensure that a business sells products that meet customer needs and wants. The role of Production and Operations is to ensure that the business actually makes the required products in accordance with the plan. The role of PRODUCT in POM therefore concerns areas such as:
- Performance- Aesthetics- Quality- Reliability- Quantity- Production costs- Delivery dates
23
PLANT
To make PRODUCT, PLANT of some kind is needed. This will comprise the bulk of the fixed assets of the business. In determining which PLANT to use, management must consider areas such as:
- Future demand (volume, timing)- Design and layout of factory, equipment, offices- Productivity and reliability of equipment- Need for (and costs of) maintenance- Health and safety (particularly the operation of equipment)- Environmental issues (e.g. creation of waste products)
PROCESSES
There are many different ways of producing a product. Management must choose the best process, or series of processes. They will consider:
- Available capacity- Available skills- Type of production- Layout of plant and equipment- Safety- Production costs- Maintenance requirements
PROGRAMMES
The production PROGRAMME concerns the dates and times of the products that are to be produced and supplied to customers. The decisions made about programmed will be influenced by factors such as:
- Purchasing patterns (e.g. lead time)- Cash flow- Need for / availability of storage- Transportation
24
PEOPLE
Production depends on PEOPLE, whose skills, experience and motivation vary. Key people-related decisions will consider the following areas:
- Wages and salaries- Safety and training- Work conditions- Leadership and motivation- Unionization- Communication
Aims and functions of production department:In a manufacturing company the production function may be split into five sub-functions:
1. Production and Planning: The production and planning department will set standards and targets for each section of the production process. The quantity and quality of products coming off a production line will be closely monitored. In businesses focusing on lean production, quality will be monitored by all employees at every stage of production, rather than at the end as is the case for businesses using a quality control approach.
2. Purchasing: The purchasing department will be responsible for providing the materials, components and equipment required to keep the production process running smoothly. A vital aspect of this role is ensuring stocks arrive on time and to the right quality.
3. Stores: The stores department will be responsible for stocking all the necessary tools, spares, raw materials and equipment required to service the manufacturing process. Where sourcing is unreliable, buffer stocks will need to be kept and the use of computerized stock control systems helps keep stcoks at a minimal but necessary level for production to continue unhindered.
25
4. Design and Technical Support: The design and technical support department will be responsible for researching new products or modifications to existing ones, estimating costs for producing in different quantities and by using different methods. It will also be responsible for the design and testing of new product processes and product types, together with the development of prototypes through to the final product. The technical support department may also be responsible for work study and suggestions as to how working practices can be improved.
5. Works: The works department will be concerned with the manufacture of products. This will include the maintenance of the production line and other necessary repairs. The works department may also have responsibility for quality control and inspection.A key aspect of modern production is ensuring quality. The term quality means fitness for purpose i.e. a product; process or service should do exactly what is expected of it.
Purchase Store In charge: Preparation of purchase order / Arranging for purchase of Raw
Materials, spares and consumables. Supplier evaluation and maintenance of approved suppliers list follow
up with suppliers Maintenance of record in relation to purchase of products Maintenance of minimum stock level Stock register and material identification Preservation of materials stores
26
Products by Swaraj Engineering Works:
Heavy Structural Fabrication:
Pre-Engineering Steel Fabrication, Girders & Doors of dam, Structural Fabrication, Industrial Piping, Factory Construction, Building Erection Works, etc.
Special Features of our Structural Fabrication Services:
Timely completion of work Effective customer support Completes work under the supervision of qualified professionals Reliability Meets your budgetary constraints Ensures complete customer satisfaction
Heavy Machine Shop:
Wide range of components includes heavy jobs up to 450 mm diameter & 12 Feet length, as we are equipped with heavy machinery ,which includes lathes (4 f,7 f & 12 f) along with Universal Milling and Drilling machines, Cut off machines(Band Saw).
27
CNC Machine components:To meet the requirement of accuracy and precision, we are equipped
with the precisely engineered CNC machine tools that deliver the product with consistency, reliability and in time delivery.
Quality for us is one of the most important areas and we strongly believe that our consistent relationship with our customers purely depend on our capability to ensure delivery of good quality merchandise.
We offer following services:-
Custom Made Parts CNC Machining Services Hard Part Turning
Machine Shop:
We are offering our clients well maintained Machine Shop Floor, that is maintained well by complying with the requirement of 5's activity.
28
Material Handling Equipments:
We are engaged in producing a wide range of material handling equipment which is appreciated by our clients from across the country.
We are involved in bringing forth an expansive range of Material Handling Equipment. Following TQM policies and by employing latest techniques, this equipment is developed in conformance with the industry norms & standards. Precisely engineered our offered equipment find wide application in construction and engineering related industries. Further, clients can avail these equipments in various specifications as per their needs and demands.
Features:
Easy operation Heavy load bearing capacity Low maintenance cost
Jigs and Fixtures:
We produce and supply an array of Jigs and Fixtures which finds application in the several industries.
Features: Jig & Fixtures are extensively used in automotive and welding
industries. The Jig & Fixtures are the economical ways to produce a
component in mass. Jig & Fixtures are used and serve as one of the most important
facility of mass production Jig & Fixtures are special work holding and tool guiding device.
29
Press Components:
Our organization is involved in offering a quality range of metal press components that are manufactured in compliance with the international standard. With the help of our cutting edge technology.
Features:
Press Parts are manufactured from the premium quality metals. Press Parts are widely used in various industries for several
applications. The diverse machine components that we manufacture include
press parts. Press Parts designed to be compatible with a host of machinery
they are used across several industries.
30
Press Tools:
We offer a range of press tools that assist in shaping or cutting of materials. These are suitable for applications in most manufacturing industries including automobile. The press tools are available in different shapes and dimensions.
Features:
Our Metal Press Tools made from high quality raw materials and deliver efficient performance.
These Metal Press Tools are manufactured according to the instruction provided by the clients.
The Press Tools offered by us is stringently tested for quality and performance.
Our Metal Press Tools are manufactured in various designs and various sizes as per the clients’ needs and market demand.
31
Companies Facility in Production Department:
32
Quality Management System at Swaraj Engineering Works:
ISO 9001:2008 specifies requirements for a quality management system where an organization.
Needs to demonstrate its ability to consistently provide product that meets customer and applicable statutory and regulatory requirements, and
Aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
Quality Policy
We at Swaraj Engineering Works are strictly committed to deliver our valued clients with world class products at highly competitive prices. With years of experience in Metal Parts industry.
Excellent Product Quality
Prompt Service
Employee Involvement
Continual Improvement in the Effectiveness of Quality
Management System
Quality Control
Overall quality control and assurance Maintenance of records related to incoming materials, in process
materials and final stage productions inspection reports including dimensional inspection
Calibration of inspection and testing equipment / instruments Identification of training needs of functions reporting to him Has the authority to stop production, to correct the quality problems
33
34
D. Plant Engineering
Plant engineering department handle all the maintenance of machines and establishment of new machines for production. It also handles power supply, air supply and air compressor for the production purpose in the company.
WORKS OF PLANT ENGG. DEPT.
Power supply
Air supply
Air compressor
Water Supply
Maintenance of all machines
New machine establishment
35
KEY CLIENT RELATIONSHIP PORTFOLIO
Here we want to express our heartfelt gratitude to our clients for the
trust they have been placing in us
Clients from Automotive Sector:
Bajaj Auto Ltd.
Mahindra & Mahindra
Rucha Technologies Pvt. Ltd.
Badve Engineering Pvt. Ltd.
Marathwada Auto Component Pvt. Ltd.
Yashashree Auto Component Pvt. Ltd.
Clients From Non Automotive Sector:
Kirloskar Group
VS Engineering
36
37
SWOT ANALYSIS
Strength
Well qualified and skilled manpower
Very period of experience
Good employee management
Product Quality
Company Reputation
Weakness
Inventory control is poor
Working environment
Workers are not able to adopt new technologies
Lack of export
Opportunities
Uses of machines are increasing
New technologies are developing
Increasing demand of heavy fabrication
Threats
o Heavy competition
o Increasing in Price of raw material
o Adopting old techniques of manufacturing
38
Suggestion
Welfare activities of the worker should have to be improved.
Company should ensure participative management.
Promotion and marketing activities should be improved.
Scope of expansion
Staff coordination
Company should focus on modernization.
39
Limitation
Generally the organization does not allow outsiders to conduct any
study or research work in the organization. Therefore, get the project
done in the organization was very difficult.
The project based on theoretical guidelines and as per situation
precvalnt at the time practical training. Hence, it may not be apply to
different situation.
The time span for the project was very short which was of two months,
which itself act as constraint, Moreover, studying the guidelines and
applied it practically with in such a short time span was a task of great
pressure.
40
Conclusion
I have done this project report in a very healthy atmosphere, where
everyone cooperated me to do my project work in a systematic and complete
manner. This training has given me the knowledge about the various functions
in company.
In Plant Training helped me to understand all the functions, which is
going in the company. This training also helped me to understand the
managerial skills, which I study theoretically.
41
Bibliography
Companies Website
Senior managers guidelines
Wikipedia
onlinelibrary.wiley.com
42