project on solar city

Upload: ahuja-ravi88

Post on 30-May-2018

219 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/14/2019 Project on Solar City

    1/13

    PROJECT ON SOLAR CITY

    PRESENTED BY

    ARCHIT SHAH

    NIRAJ KHAMARGAURAV

  • 8/14/2019 Project on Solar City

    2/13

    TECHNICAL ANALYSIS

    TECHNOLOGY PV

    Expected future efficiencies are nearly 90%

    Concentrating photovoltaics

    CSP

    Concentrating solar power plants produce electric power by converting the sun's energy intohigh-temperature heat using various mirror configurations. The heat is then channelled througha conventional generator. The plants consist of two parts: one that collects solar energy andconverts it to heat, and another that converts heat energy to electricity.

    Concentrating solar power systems can be sized for village power (10 kilowatts) or grid-connected applications (up to 100 megawatts). Some systems use thermal storage duringcloudy periods or at night. Others can be combined with natural gas and the resulting hybridpower plants provide high-value, dispatchable power. These attributes, along with world recordsolar-to-electric conversion efficiencies, make concentrating solar power an attractiverenewable energy option in the Southwest and other sunbelt regions worldwide. There are fourCSP technologies being promoted internationally. For each of these, there exists various designvariations or different configurations. The amount of power generated by a concentrating solarpower plant depends on the amount of direct sunlight. Like concentrating photovoltaicconcentrators, these technologies use only direct-beam sunlight, rather than diffuse solarradiation

    50% efficiency

  • 8/14/2019 Project on Solar City

    3/13

    MATERIAL INPUTS

    PANELS

    PV CELLS

    BATTERY INVERTER

  • 8/14/2019 Project on Solar City

    4/13

    PRODUCT MIX

    ELECTRICAL

    MECHANICAL

    HEAT

  • 8/14/2019 Project on Solar City

    5/13

    PLANT CAPACITY

    A 4 kW photovoltaic system

    was integrated into the roof structure

    along with 5 m2 of solar thermal panels. In addition to being used as a

    working example of a domestic

    photovoltaic installation

  • 8/14/2019 Project on Solar City

    6/13

    LOCATION AND SITE

    NOT NEAR TO MULTISTORAGEBUILDING

    NEAR TO GIFT CITY

  • 8/14/2019 Project on Solar City

    7/13

    MACHINERY & EQUIPMENT

  • 8/14/2019 Project on Solar City

    8/13

    STRUCTURE&CIVILWORK

  • 8/14/2019 Project on Solar City

    9/13

    ENVIRONMENTAL ASPECTS

    ECO FRIENDLY

    GREEN PROJECT

  • 8/14/2019 Project on Solar City

    10/13

    FINANCIAL ANALYSIS

    Table:

    Design 4 kw So one battery 24w=167 battery

    require

    1 battery cost 6000 rs/-

    So 167*6000=10,02,000 rs/-

    Inverter efficiency 85%

    So 4000/.85=4705 w inverter

  • 8/14/2019 Project on Solar City

    11/13

    One inverter cost 50,000 rs/-

    Panel 1.85$/watt aten panel

    So 1.85*4500=8325$

    So 8325*50=4,16,250 rs/-

    So total cost = 1468250 rs/- Grid connection = 31750 rs/-

    So total 15,00,000 rs/-. Ans.

  • 8/14/2019 Project on Solar City

    12/13

    REFERANCE

    WWW.GEDA.ORG.IN

    WWW.SOLARBUZZ.COM

    www.powerstream.com

    http://www.geda.org.in/http://www.solarbuzz.com/http://www.powerstream.com/http://www.powerstream.com/http://www.solarbuzz.com/http://www.geda.org.in/
  • 8/14/2019 Project on Solar City

    13/13

    THANK YOU