Project of Guided Vehicle:-This project consists of four main stages, which are theoretical design, mechanical fabrication, electronic hardware design and as well as algorithm design in assembly language .The matter to be considered is how the robot can follow the trail of line continuously. It is also important to choose the most suitable microcontroller, actuators, and sensors to achievethe project objectives.Project of Solar Book:-

The Chronar Corporation originally developed a batch plasma deposition process for making amorphous silicon substrates.After Chronar filed bankruptcy in 1990, the principal investor formed Advanced Photovoltaic Systems, Inc. (APS) and continued development of the a-Si deposition process at a Trenton NJ pilot plant. APS eventually transferred the technology and equipment to a special purpose plant in Fairfield, CA in 1992-93 and operated it in limited production until bankruptcy again intervened. Factory assets were eventually purchased by BP Solar.The back side of the panels have metal conductors deposited on them, and most of my panels have a clear protective coating sealing them.To expose the conductive surface I use lacquer thinner and a Q tip to dissolve and remove the clear protective coating. Than I can use an alligator clip or some other spring loaded clip to make electrical contact with the panel.