programming the hexcorder to play a sound bite in english click on the speaker symbol at the bottom...
TRANSCRIPT
![Page 1: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/1.jpg)
Programming The HexcorderProgramming The Hexcorder
To play a sound bite in English click on the speaker symbol at the bottom
of each slide
![Page 2: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/2.jpg)
Starting the HexcorderStarting the Hexcorder
Turn the Hexcorder ON by pressing the upper right yellow key, before suiting up with your equipment, to allow the GPS engine time to acquire the satellites.
![Page 3: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/3.jpg)
Main MenuMain Menu
Hexcorder Main Menu
1 - Survey2 – Setup3 – Export Data4 – Change time5 – TestEM – Erase MemoryW – WaveG – GPS ON/OFFOF – Turn Unit OFF
![Page 4: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/4.jpg)
Programming the HexcorderProgramming the Hexcorder Press 2 for setup If this is a new project
erase the memory first. Displays current
programming. Press A to accept or C to
change programming Tip after erasing the
memory you must go through the set-up procedure
![Page 5: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/5.jpg)
Change File NameChange File Name
Press N to Add a File Name to the File Number.
The file name must consist of 8 characters, letters, numbers or spaces can be used.
![Page 6: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/6.jpg)
Survey ModeSurvey Mode
Here You Select the survey type
Close Interval Data Logger CIPS + DCVG DCVG
![Page 7: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/7.jpg)
Distance StandardDistance Standard
Press C to toggle between Metres and Feet
Select Distance measurement Standard then press A to Accept
![Page 8: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/8.jpg)
Measurement methodMeasurement method
Press C to toggle Between:
Non Interrupted High/Low
(Interrupted) GPS Synchronized
Select method and Press A to Accept
![Page 9: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/9.jpg)
Rectifier OFF TimeRectifier OFF Time
Enter the rectifier OFF time in Milliseconds
from
50 milliseconds
To
9999 milliseconds
![Page 10: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/10.jpg)
Rectifier ON TimeRectifier ON Time
Enter the ON time in milliseconds
From
500 milliseconds
To
99999 milliseconds
![Page 11: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/11.jpg)
OFF Measurement DelayOFF Measurement Delay
Enter the delay time in milliseconds after the rectifiers turn off before measuring the OFF potential
Tip Must be Between 10 milliseconds and 150milliseconds
Typically Set to 100 Milliseconds
![Page 12: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/12.jpg)
Input ImpedanceInput Impedance
Press 1 for 10M Ohm input impedence
Press 2 for 250M ohm input impedence
![Page 13: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/13.jpg)
Power System FrequencyPower System Frequency
The Hexcorder needs to know the power system frequency for AC filtering
Press C to toggle between 50 and 60 Hz.
![Page 14: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/14.jpg)
Store GPS CoordinatesStore GPS Coordinates
You have the option of storing GPS coordinates in all three survey methods.
Y = Store N = Don’t Store
![Page 15: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/15.jpg)
Measurement TriggerMeasurement Trigger
M = Manual – Push Button on half cell stick
A = Automatic
Time Distance
![Page 16: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/16.jpg)
ProgramProgram
The Hexcorder Now Returns to The Program Window
If Program Correct Press A to Accept
If Incorrect Press C to Change the Program
![Page 17: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/17.jpg)
Return to Main MenuReturn to Main Menu When A is pressed to
accept the set-up program the Hexcorder returns to the main menu
If 1 is pressed for survey the following additional questions must be answered
![Page 18: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/18.jpg)
ChainageChainage
Enter the chainage for the starting point of the survey.
There is NO decimal Point on the Keyboard
Do not enter “0” then set the increment to -ve
Tip Negative chainages are not allowed
![Page 19: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/19.jpg)
Distance IncrementationDistance Incrementation
The Hexcorder will add or subtract distance from the entered chainage
To add to the chainage set incrementation to +
To subtract from the chainage set incrementation to -
![Page 20: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/20.jpg)
Survey DescriptionSurvey Description
Type in a description of the survey
Press the ENTER key when finished
![Page 21: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/21.jpg)
Returns to Main MenuReturns to Main Menu
The Hexcorder Returns to the Main Menu
Press 1 to start surveying
NOTE: There may be a delay in GPS synchronized waiting for Satellite Acquisition
![Page 22: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/22.jpg)
CIPS + DCVG Survey ScreenCIPS + DCVG Survey Screen Screen Displays: Pipe-to-Soil Potential
Rectifier ON & OFF mV Voltage Gradient
Rectifier ON & OFF mV
Record # = Readings Taken Chainage (Distance) GPS Coordinates, %
memory used, Elevation, PDOP Value
![Page 23: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/23.jpg)
Quick MenuQuick Menu
In survey Mode the Quick Menu can be Called Up by Pressing the WHITE MENU KEY
The Quick Menu is editable from 5 = Test in the Main Menu
![Page 24: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/24.jpg)
Survey Graph ModeSurvey Graph Mode
Press and Hold the G key for 5 seconds to access the Graph display
To return to Numeric Display Press and Hold G Key for 5 seconds
Graph Display
Numeric Display
![Page 25: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/25.jpg)
Graph Display RangeGraph Display Range
When G is Pressed for Graphical Display, The Hexcorder asks for the Voltage Range for the display, Select:
1 = 0- 2000 mV 2 = 0 to -3500 mV 3 = +5000 to –5000 mV
![Page 26: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/26.jpg)
WaveformWaveform Waveform can be
accessed from the Main Menu press S for Scope or from the Quick menu, press 2 for Waveform
Waveforms verify synchronization of the Interrupters
Take at Least 2 per Day
![Page 27: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/27.jpg)
RESETRESET
Press the Two Yellow Keys simultaneously at any time to return to the main Menu
![Page 28: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/28.jpg)
Other FeaturesOther Features
From the Main Menu other Features Can be Accessed
3 = Export Data
4 = Change Time
5 = Test
S = Scope (Waveform)
G = Turn GPS engine ON & OFF
EM = Erase Memory
![Page 29: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/29.jpg)
Export Data MenuExport Data Menu
To Export Data, connect the Hexcorder to the com port on your computer.
Configure Hyper-Terminal and the Hexcorder for:
38,400 Baud
No Parity
I stop Bit
X ON X OFF Software Control
![Page 30: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/30.jpg)
Export Data DirectoryExport Data Directory
Pressing D when in the Export Data menu displays the files stored in memory and their size.
![Page 31: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/31.jpg)
Export DataExport Data
Select Survey files to export, either single files with F or all files with G
Select Waveform Files to Export, W for single File, E for all files
![Page 32: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/32.jpg)
ChangeChange TimeTime
The Hexcorder is equipped with an internal clock, This clock is used when the GPS engine is not active and should be set to the current date and time.
yy = year
mm = month
dd = Day
w = day of week Sunday = 1
hh = hour
mm = minutes
ss = seconds
![Page 33: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/33.jpg)
Erase MemoryErase Memory
Erase the memory after your data is backed up and archived.
Press E+M together to erase the memory, The Hexcorder Queries with are you sure Y/N
![Page 34: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/34.jpg)
5 = Test5 = Test
K = Keyboard Test
Use to Check Which Keys are Working
M = Memory, Test the Memory
E = EPROM test the Firmware
Q = Quick menu (edit the quick menu)
A = Alarm Settings
![Page 35: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/35.jpg)
K = Keyboard TestK = Keyboard Test
Pressing K from the Test Menu Screen lets you test all 40 keys of the Keyboard, use this if you thing a key is not working.
![Page 36: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/36.jpg)
M = Memory TestM = Memory Test
Press M from the Main Menu for Memory test, this fully test the main menu where data is stored.
DO NOT Touch The Keyboard while test is in progress
![Page 37: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/37.jpg)
E = EPROM TESTE = EPROM TEST
This test the FIRMWARE, do not touch the keyboard during the test
![Page 38: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/38.jpg)
Q = Quick MenuQ = Quick Menu
Pressing Q lets you edit the quick menu
8 characters are required per Key, use space to fill unused characters.
The curser moves automatically
![Page 39: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/39.jpg)
A = AlarmsA = Alarms
From the Main Menu the following features can be activated or seen
Alarms
Potential/Distance
PDOP
![Page 40: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/40.jpg)
AlarmsAlarms
The Hexcorder is equipped with alarms for:
Distance/Potential PDOPPress C to Toggle
between Enabled & Disabled
A to accept
![Page 41: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/41.jpg)
Alarms PDOPAlarms PDOP
Press C to Toggle between Enabled & Disabled
If Enabled enter the PDOP Alarm Value from 1 to 15
NOTE: It is recommended that you enter a value greater than 6
![Page 42: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/42.jpg)
S = ScopeS = Scope
From the Main Menu Press S for Scope (Waveform)
Waveforms verify that your interrupters are synchronized
Twice Per Day Capture a WaveformTwice Per Day Capture a Waveform
![Page 43: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/43.jpg)
Data SecurityData Security
At the end of the day or more frequently the data should be down loaded to a PC and backed up on the hard drive and on a diskette
For added security editing of the survey data can not be accomplished after it is stored in the HEXCORDER’s memory.
![Page 44: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/44.jpg)
Data FormatData Format
The data can be exported in three formats:
ASCII comma delimited Hexadecimal ProActive
![Page 45: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/45.jpg)
SoftwareSoftware
Special software is not required with the CATH-TECH™ HEXCORDER survey system
Windows Hyper Terminal is used to down load the data.
Microsoft Excel or other spread sheet program is used to graph the data
![Page 46: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/46.jpg)
The CATH-TECHThe CATH-TECH™ ™ Hexcorder Survey SystemHexcorder Survey System
No special software is required to produce presentation quality graphs of your data gathered by the CATH-TECH™ Hexcorder Professional Survey Equipment
![Page 47: Programming The Hexcorder To play a sound bite in English click on the speaker symbol at the bottom of each slide](https://reader036.vdocuments.site/reader036/viewer/2022062308/56649ce45503460f949b0d78/html5/thumbnails/47.jpg)
The EndThe End
Thank you from the staff at:
Cathodic Technology Ltd.15-1 Marconi Court
Bolton, OntarioCanada L7E 1E2Ph. 905 857-1050Fax 905 857-3499
Email [email protected] Site: www.cath-tech.com