programmable accelerated curing tanks - · pdf fileprogrammable accelerated curing tanks ......

1
TESTING ADVANCED TECHNOLOGIES Toll-Free: 1.877.884.TEST (8378) | Fax: 954.697.8211 [email protected] | www.WorldofTest.com Programmable Accelerated Curing Tanks www.WorldofTest.com/programmable-accelerated-curing-tanks ASTM C684, BS 1881:112 This test method covers procedures for curing concrete specimens under conditions intended to accelerate the development of strength. Three versions are available: QT-PACT:I model which cover the ASTM C684 (Procedure A, warm water method) and BS 1881:112 for 35-55°C hot water method. QT-PACT:II similar to the above, but covering steam method. QT-PACT:III model, covering both hot water and steam method. These special curing tanks have been designed for hot water curing or steam curing in accelerated strength concrete. The interior is made from stainless steel. The electronic programmer can control up to four test cycles with different thermal gradients and curing time to a defined tempera- ture value for a complete automatic curing cycle. The control panel include a 28 column thermal printer.

Upload: voquynh

Post on 10-Mar-2018

233 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: Programmable Accelerated Curing Tanks - · PDF fileProgrammable Accelerated Curing Tanks ... ASTM C684, BS 1881:112 This test method covers procedures for curing concrete specimens

TESTINGADVANCED

TECHNOLOGIES

Toll-Free: 1.877.884.TEST (8378) | Fax: [email protected] | www.WorldofTest.com

Programmable Accelerated Curing Tankswww.WorldofTest.com/programmable-accelerated-curing-tanksASTM C684, BS 1881:112

This test method covers procedures for curing concrete specimens under conditions intended to accelerate the development of strength.

Three versions are available:

QT-PACT:I model which cover the ASTM C684 (Procedure A, warm water method) and BS 1881:112 for 35-55°C hot water method.QT-PACT:II similar to the above, but covering steam method.QT-PACT:III model, covering both hot water and steam method.

••

These special curing tanks have been designed for hot water curing or steam curing in accelerated strength concrete. The interior is made from stainless steel. The electronic programmer can control up to four test cycles with different thermal gradients and curing time to a defined tempera-ture value for a complete automatic curing cycle. The control panel include a 28 column thermal printer.