program - ieee-ecce.org · of singapore, singapore ... university of beira interior, portugal...
TRANSCRIPT
SPONSORED BY THE IEEE POWER ELECTRONICSAND INDUSTRY APPLICATIONS SOCIETIES
IEEE ENERGY CONVERSION CONGRESS & EXPO
DENVER, COLORADO, USA | SEPTEMBER 15-19 , 2013
PROGRAM
COLORADO CONVENTION CENTER
700 14TH STREET, DENVER, CO 80202
WWW.ECCE2013.ORG
Table of Contents
Welcome Letter ........................................................................................................................................................... 2
Denver Welcome Letter .............................................................................................................................................. 3
ECCE 2013 Leadership ................................................................................................................................................ 4
ECCE 2013 Supporters and Partners ........................................................................................................................... 6
PELS 25th Anniversary Invitation ................................................................................................................................. 7
Schedule-at-a-Glance ................................................................................................................................................. 8
Detailed Schedule ..................................................................................................................................................... 10
Event Services ........................................................................................................................................................... 22
General Information .................................................................................................................................................. 23
Special Events ........................................................................................................................................................... 24
Presenter Information ............................................................................................................................................... 27
Committee Meetings ................................................................................................................................................ 28
Colorado Convention Center Floor Plans .................................................................................................................. 30
Downtown Denver Map ............................................................................................................................................ 31
Plenary Session ......................................................................................................................................................... 32
Townhall Meetings ................................................................................................................................................... 33
Tutorials ..................................................................................................................................................................... 34
Technical Program Schedule .................................................................................................................................... 37
Oral Sessions...................................................................................................................................................... 37
Poster Sessions .................................................................................................................................................. 64
Exposition .................................................................................................................................................................. 77
Student Demonstrations .................................................................................................................................... 77
Exhibit Hall Floor Plan ........................................................................................................................................ 78
Exhibitor Listing .................................................................................................................................................. 79
Exhibitor Directory .............................................................................................................................................. 80
ECCE 2014 Information ............................................................................................................................................. 86
ECCE 2014 Call for Tutorials ............................................................................................................................... 86
ECCE 2014 Call for Papers.................................................................................................................................. 88
ECCE 2014 Call for Special Session Organizers ................................................................................................ 89
2013 IEEE Energy Conversion Congress & Exposition® • 1
Dear friends and colleagues,
Welcome to Colorful Denver, Colorado and the Fifth Annual IEEE Energy Conversion Congress and Exhibition (ECCE 2013). The spectacular backdrop of the majestic Rockies combining with the pioneering ethic of the Colorado Front Range gives ECCE 2013 an unmatched energy and excitement, as the combina-tion of the Wild West mindset mixing with the innovative spirit of the energy conversion community serves to uniquely defi ne the ethos of this edition of the ECCE conference, an ethos that is exemplifi ed by the number of renewable industry players that are located in this area, such entities as NREL, Molycorp, Ves-tas, SMA America, Unique Mobility, Xcel Energy, REpower USA, RES-Americas, Boulder Wind Power, Siemens Energy, Clipper Wind Power, One Globe Renewables, Sky Fuel, to name a few.
In addition, we are fortunate in hosting an auspicious landmark celebration: the 25th anniversary of the founding of the Power Electronics Society, one of the co-sponsor societies of the ECCE. Please keep an eye out for the special celebration of this event.
ECCE is also very happy to welcome SMMA — The Motor & Motion Association as an Association Partner. SMMA is the manufacturing trade association for the electric motor and motion control industries, consisting of more than 120 member companies include manufacturers, suppliers, users, consul-tants and universities. Many of you will recognize the SMMA from their outstanding work in their Motor and Motion College, the Permanent Magnet Division, and the Electric Motor Educa-tion and Research Foundation (EMERF). We believe that ECCE and SMMA can do great things together and we are extremely excited about the beginning of our partnership.
This year’s conference serves to present energy conversion solutions to the community, these solutions come in the form of twelve practical and ambitious tutorials, distributed evenly amongst all the technical tracks covered by ECCE; it comes in the form of four stellar keynote speakers, each bring forth their fecund imagination and wide ranging perspectives; it comes in the form of a lively and exciting exhibition program, including the popular Industrial Seminars, student project presentations focused on the area of Emerging Technologies, a Student-In-dustry dinner to facilitate the passing on of knowledge and pas-sion to the future engineers, and interspersed throughout the technical program: Special Topics sessions as well as Vendor and Products sessions to serve the immediate needs of the practicing engineer with the state of the art solutions; it comes in the form of an invigorated and energetic new format to a great traditional session: the Town Hall Meeting, replacing the Rap Session; and fi nally, it comes in the form of the expanded
Welcome Letter
Peter Wung2013 General Chair
technical program, refl ecting the talents and genius of our tech-nical community: the oral and poster sessions.
As always, the technical sessions coalesce around two major thematic areas: those topics that are focused on broad Energy Conversion System solutions and those topics that are more specifi cally focused on the Components and Subsystems solu-tions. There are smart grids, appliances, and buildings sessions alongside power semiconductor devices sessions, renewable energy systems sessions alongside electric machine sessions, transportation application sessions alongside electric motor drive sessions, telecommunication system sessions alongside power converter sessions, energy harvesting sessions along-side component and sub-component packing sessions. Suffi ce it to say that the conference hall will be abuzz with the sounds of debates, discussions, and discourses.
We have taken advantage of the opportunity that our geo-graphical location has provided and have planned two exciting tours that are unique to this area. One is to the world renowned National Renewable Energy Laboratory’s (NREL) National Wind Technology Center while the second planned tour is to SMA America PV Inverter manufacturing facility. Both tours should be outstanding.
As you can see, the ECCE 2013 Dream Team is proud of this pro-gram and we hope that it meets your expectations and serves your needs.
My deepest gratitude to the ECCE 2013 organizing committee, the vice chairs and topic chairs of the technical programs com-mittee and the members of the exhibits committee for the hard work and long hours that they have put in voluntarily. Thanks are also due to the offi cers of the two sponsoring societies, PELS and IAS, for their steadfast support of the conference. A very enthusiastic thank you to the Courtesy Associates team who has supported ECCE since its inception, their assistance has been invaluable.
Finally, I would like to express our gratitude to our sponsors: GE Global Research, Nexteer Automotive, OPAL-RT, Allegro MicroSystems, LLC, Ingersoll Rand, Powerex Inc., and our many other partners and exhibitors. Our mission would be impossible without your continued support.
2 • 2013 IEEE Energy Conversion Congress & Exposition®
Dear ECCE Energy Conversion Congress Attendees:
On behalf of VISIT DENVER and our more than 1,200 business members, I’d like to welcome you to the Mile High City! You couldn’t have picked a more exciting time to visit. Denver is booming with new museums, restaurants, brewpubs and attractions. Walk along our mile-long 16th Street Mall, which is lined with 42 outdoor cafes. The electric buses on the Mall are free – hop on and hop off, they make everything easy to reach.
From the Denver Art Museum (designed by renowned architect Daniel Libeskind) to our new His-tory Colorado Center, you’ll fi nd Denver is fi lled with attractions to explore. We have the nation’s second largest performing arts center and six sports stadiums, for a record seven professional sports teams. Our B-cycle bike sharing program has more than 800 bikes available at 83 stations across the city, part of an 850-mile network of off-street bike trails.
And of course, we have outstanding shopping and dining opportunities, exciting nightlife and live music – and we brew more beer than any other city in America! After the meeting, the beauty, splendor and adventure of the Colorado Rocky Mountains are only minutes away. We hope you have a safe and productive stay in our city, and come back soon!
Richard W. ScharfPresident & CEO
P.S. You can fi nd everything you need to know about Denver at www.visitdenver.com.
1555 California Street, Suite 300, Denver, CO 80202 I Main: 303.892.1112 I Fax: 303.892.1636
Denver Welcome Letter 2013 IEEE Energy Conversion Congress & Exposition® • 3
ECCE 2013 Leadership
Organizing Committee
Program Subcommittees
General ChairPete Wung, Regal-Beloit Corporation EPC, USA
Technical Program ChairsAldo Boglietti, Politecnico di Torino, Italy
Michael Harke, UTC Aerospace Systems, USA
Paolo Mattavelli, University of Padova, Italy
Giovanna Oriti, Naval Postgraduate School, USA
Aleks Prodic, University of Toronto, Canada
Exhibits and Industry Sessions ChairMohammad Islam, Nexteer, USA
Finance ChairMark Nelms, Auburn University, USA
Publicity ChairPo-Tai Chang, National Tsing Hua University, Hsinchu, Taiwan
Publications ChairWei Qiao, University of Nebraska-Lincoln, USA
Tutorials ChairAndy Knight, University of Alberta, Canada
Plenary ChairDan Saban, Halliburton, USA
Student Programs ChairsDavid Wenzhong Gao, University of Denver, USA
Helen Li, Florida State University, USA
Awards ChairEmmanuel Agamloh, Advanced Energy Corporation, USA
Webmaster/Social Media ChairYoon Ha, USA
Jennifer Vining, Daimler Trucks North America LLC, USA
Local ChairsDavid Wenzhong Gao, University of Denver, USA
Eduard Muljadi, NREL, USA
Renewable and Sustainable Energy Technologies Liuchen Chang (Vice Chair), University of New Brunswick, Canada
Dave Dorrell (Vice Chair), University of Technology Sydney, Australia
Pedro Rodriguez (Vice Chair), Abengoa, Spain
Dehong Xu (Vice Chair), Zhejiang University, China
Francisco Canales, ABB CRC, Switzerland
Henry Chung, The City University of Hong Kong, Hong Kong
Ion Etxeberria, IK4-IKERLAN Technology Research Center, Spain
Alvaro Luna, Universitat Politecnica de Catalunya, Spain
Sudip K. Mazumder, University of Illinois, USA
Dezso Sera, Aalborg University, Denmark
Sonny Xue, Siemens Corporate Research, USA
Transportation Applications Aymen El-Refaie (Vice Chair), GE Global Research, USA
Fabio Giulii Capponi, La Sapienza Università di Roma, Italy
Srdjan Lukic, NC State University, USA
Chris Mi, University of Michigan-Dearborn, USA
Khwaja Rahman, General Motors, USA
Smart Grid & Utility ApplicationsAdel Nasiri (Vice Chair), University of Wisconsin-Milwaukee, USA
Jon Suul (Vice Chair), Norwegian University of Science
and Technology, Norway
Salvatore D’Arco, SINTEF Energy Research, Norway
Josep Guerrero, Aalborg University, Denmark
Ashwin M. Khambadkone, National University
of Singapore, Singapore
Behrooz Mirafzal, Kansas State University, USA
Marta Molinas, Norwegian University of Science
and Technology, Norway
Yongsug Suh, Chonbuk National University, South Korea
Elisabetta Tedeschi, SINTEF Energy Research, Norway
Sheldon Williamson, Concordia University, Canada
Exhibition Committee
Mohammad Islam (Chair), Nexteer, USA
Sabrina Benzid, OPAL-RT Technologies Inc., Canada
Eduard Mujadi, NREL, USA
Tim Olsen, Advanced Energy Systems, LLC, USA
Tomy Sebastian, Nexteer, USA
Steve Sprague, Proto Laminations, Inc., USA
Peter Wung, Regal-Beloit Corporation EPC, USA
4 • 2013 IEEE Energy Conversion Congress & Exposition®
Electrical Machines Andy Knight (Vice Chair), University of Edmonton, Canada
Mircea Popescu (Vice Chair), Motor Design Limited, UK
Emmanuel Agamloh, Advanced Energy, USA
Kan Akatzu, Shibaura Institute of Technology, Japan
Nicola Bianchi, Università di Padova, Italy
Sang Bin Lee, Korea University, Korea
Radu Bojoi, Politecnico di Torino, Italy
Antonio Cardoso, University of Beira Interior, Portugal
Andrea Cavagnino, Politecnico di Torino, Italy
Akira Chiba, Tokyo Institute of Technology, Japan
Yao Duan, Vestas, USA
Abraham Gebregergis, Nexteer, USA
Elena Lomonova, Eindhoven University of Technology, Netherland
Marcello Pucci, I.S.S.I.A. -C.N.R., Italy
Jagadeesh Tangudu, United Technologies RC, USA
Thomas Wu, University of Central Florida, USA
Julia Zhang, Oregon State University, USA
Electric Drives Fernando Briz (Vice Chair), University of Oviedo, Spain
Brian Welchko (Vice Chair), General Motors, USA
Radu Bojoi, Politecnico di Torino, Italy
Uday Deshpande, General Atomics, USA
David Diaz-Reigosa, University of Oviedo, Spain
Tobias Geyer, ABB Corporate Research, Switzerland
Lei Hao, GM, USA
Mario Pacas, University of Siegen, Germany
Gianmario Pellegrino, Politecnico di Torino, Italy
Bulent Sarlioglu, University of Wisconsin, USA
Giacomo Scelba, Università di Catania, Italy
Stefan Schroeder, GE, Germany
Jul-Ki Seok, Yeungnam University, Korea
Mahesh Swamy, Yaskawa, USA
Luca Zarri, Università di Bologna, Italy
Components, Packaging, and Other Enabling Technologies Filippo Chimento (Vice Chair), ABB Corporate Research, Sweden
Craig Winterhalter (Vice Chair), Rockwell Automation, USA
Shashank Krishnamurthy, United Technologies Research Center, USA
Jean-Luc Schanen, Grenoble University, France
Adam Skorek, University of Quebec at Trois-Rivieres, Canada
Charles Sullivan, Dartmouth University, USA
Computer/Telecommunication Applications and Power Converter Topologies
Dragan Maksimovic (Vice Chair), University of Colorado
at Boulder, USA
David Perreault (Vice Chair), MIT, USA
William Peterson (Vice Chair), E & M Power, USA
Pericle Zanchetta (Vice Chair), Nottingham University, UK
Jaber Abu Qahouq, (PELS) The University of Alabama, USA
Jurgen Biela, ETH, Zurich, Switzerland
Stefano Biffareti, University of Rome, Italy
Rolando Burgos, Virginia Tech, USA
Domenico Casadei, University of Bologna Italy
Chin Chang, SEMTECH Corporation, USA
Luca Corradini, University of Padova, Italy
Fabio Crescimbini, University Roma TRE, Italy
Drazen Dujic, ABB Corporate Research, Switzerrland
Dusan Graovac, Infenion Technologies, Munich, Germany
Yehui Han, University of Wisconsin-Madison, USA
Dragan Jovcic, University of Aberdeen, UK
Sabate Juan, GE, USA
Faisal Khan, University of Utah, USA
Alessandro Lidozzi, University Roma TRE, Italy
Chen Lihua, Ford Motor Company, USA
Wei Lixiang, Rockwell Automation, USA
Sebastien Mariethoz, ETH, Zurich, Switzerland
Mahmoud Matar, CAPE, University of Toronto, Canada
Ali Mehrizi-Sani, Washington State University, USA
Thierry Meynard, University of Toulouse, France
Gerry Moschopoulos, University of Western Ontario, Canada
Vietson Nguyen, UTC Aerospace Systems, USA
Predrag Pejovic, University of Belgrade, Serbia
Mor Peretz, Ben Gurion University, Israel
Brandon Pierquet, Universiy of Washington, USA
Robert Pilawa, University of Illinois, USA
Barry Rawn, Leuven University, Belgium
Juan Rivas, University of Michigan, USA
Stefano Saggini, University of Udine, Italy
Charles Sao, ABB Corporate Research, Sweden
Vahid Yousefzadeh, Texas Instruments, USA
Luca Zarri, Università di Bologna, Italy
Conflict of Interest Rolando Burgos, Virginia Polytechnic Institute, USA
Surin Khomfoi, King Mungkut Institute of Technology, Thailand
Yongsug Suh, Chonbuk National University, South Korea
Pierluigi Tenca (Vice Chair), GE Global Research, Germany
Bingsen Wang, Michigan State University USA
Lixiang Wei (Vice Chair), Rockwell Automation, USA
ECCE 2013 Leadership
Program Subcommittees (Continued)
2013 IEEE Energy Conversion Congress & Exposition® • 5
ECCE 2013 would like to express our gratitude for the generoussupport received from the following:
ECCE 2013 Supporters and Partners
Industry Student Dinner Supporters
Exhibit Hall Welcome Reception Supporter
Exhibit Hall Lunch Station Supporters
Media Partners
Association Partner
6 • 2013 IEEE Energy Conversion Congress & Exposition®
Evening MCPete Wung — General Chair
Special Event MCPrasad Enjeti — 25th Anniversary Chair
Phil Krein — 25th Anniversary Co-Chair
Featured Special GuestsDon Tan — President
John Kassakian — First President
Trey Burns — Council President
Tom Wilson, Sr. — Past President
25th Anniversary Committee MembersDon Tan, Prasad Enjeti, Phil Krein,Katherine Kim, Uday Deshpande,Alireza Khaligh, and Donna Florek
Celebrating a quarter centuryof success! Toast to an even brighter quarter century!
An Invitation to Celebrate PELS 25th Anniversary
Come to the ECCE Banquet at 7:00 p.m. on Wednesday night for a very special commemorative event!
PELS 25th Anniversary 2013 IEEE Energy Conversion Congress & Exposition® • 7
Schedule-at-a-Glance
103/105
T1-1: Stability of Power Conversion Systems
104/106
T1-2: Advanced Power Semiconductors: Art of Control,
From Theory to Practice
108
T1-3: Model Predictive Control of Industrial Drives
107/109
T1-4: Testing and Diagnostics of Induction Machines in an
Industrial Environment
110/112
T1-5: Switched Reluctance Machines: Design and Control
111/113
T1-6: Dynamic Modeling of Renewable Energy Generator
and Power Plant
12:00 pm – 1:00 pm Lunch on Own
Tutorials Group 2 • 1:00 pm – 5:00 pm
103/105
T2-1: Matrix Converters: Implementation and Industrial
Applications
104/106
T2-2: Characteristics and Application of IGBT Power
Modules
108
T2-3: Power Electronics Solutions for Electric and Plug-in Hybrid
Electric Vehicle Battery Charging and Energy Management
107/109
T2-4: The Role of Thermal Simulation in Electric Machine
Optimization
110/112
T2-5: Permanent Magnet Fundamentals
111/113
T2-6: Photovoltaic Panels: Technology, Modeling and
Characterisation
102
S1: Marine and Aerospace
Systems
104/106
S2: Renewable Energy Storage
107/109
S3: Operation and Control of
DC-grids
108
S4: Modulation of Multilevel Converters
110/112
S5: Converter Modeling and
Control I
111/113
S6: DC-DC Isolated I
201
SS1: Products and Service
Session I
203
S7: Drive Control Topics in Transportation Applications
205
S8: Grid Integration of Wind Energy
207
S9: Induction Machines
210/212
S10: Power Electronic Modules I
102
S11: Battery and Battery
Management
104/106
S12: Wave Energy
Technology
107/109
S13: Modular Topologies for
Solid-state Transformers
108
S14: Control of Multilevel Converters I
110/112
S15: Stability and Power Quality
111/113
S16: DC-DCNon-isolated I
201
SS2: Products and Service Session II
203
S17: High Frequency Injection
Sensorless Control
205
S18: Grid Integration of
Solar PV
207
S19: IPM Machines for
Electric Vehicles
210/212
S20: Magnetic Materials and
Design
102
S21: Electric Drivetrain
104/106
S22: Energy Storage and PF
Control
107/109
S23: Design and Active Damping of Filters for Grid
Converters
108
S24: Converter Modeling and
Control II
110/112
S25: 3-phase Inverters
111/113
S26: DC-DCNon-isolated II
201
S27: High Power Drives
203
S28: Control Issues in
Permanent Magnet Motor
Drives
205
S29: Wind Energy Systems
207
S30: SR Machines
210/212
S31: Wide Bandgap Semi-
conductors I
4:00 pm – 6:30 pm Exhibit Hall Open ..................................................................................................................................................................................................................................................... Exhibit Hall A
4:00 pm – 6:30 pm Expo Reception Supported by OPAL RT .............................................................................................................................................................................................................. Exhibit Hall A
4:00 pm – 6:30 pm Student Demonstrations ......................................................................................................................................................................................................................................... Exhibit Hall A
5:00 pm – 6:30 pm Poster Session I ....................................................................................................................................................................................................................................................... Exhibit Hall A
7:00 pm – 9:30 pm Industry Student Dinner Supported by GE Global Research and Nexteer Automotive ................................................................................................................Mile High Prefunction
Tuesday, September 177:00 am – 6:00 pm Registration ........................................................................................................................................................................................................................................................................Lobby A
Oral Sessions • 8:00 am – 9:40 am
12:00 pm – 1:30 pm Lunch on Own
Oral Sessions • 1:30 pm – 3:35 pm
4:00 pm – 5:00 pm Newcomers Session ..........................................................................................................................................................................................................................................................210/212
5:00 pm – 7:00 pm Opening Reception ...................................................................................................................................................................................................................................Mile High Prefunction
Monday, September 167:00 am – 7:00 pm Registration ........................................................................................................................................................................................................................................................................Lobby A
8:00 am – 10:00 am Plenary Session .............................................................................................................................................................................................................................................Mile High Ballroom
10:00 am – 10:20 am AM Break ............................................................................................................................................................................................................................................................................Lobby A
Oral Sessions • 10:20 am – 12:00 pm
9:00 am – 6:00 pm Exhibit Hall Open ..................................................................................................................................................................................................................................................... Exhibit Hall A
9:40 am – 10:00 am AM Break .................................................................................................................................................................................................................................................................. Exhibit Hall A
10:00 am – 11:30 am Poster Session II ...................................................................................................................................................................................................................................................... Exhibit Hall A
11:30 am – 12:00 pm Ford Motor Company Industrial Seminar .....................................................................................................................................................................................................Exhibit Hall Stage
12:00 pm – 2:00 pm Lunch.......................................................................................................................................................................................................................................................................... Exhibit Hall A
2:00 pm – 2:30 pm OPAL RT Industrial Seminar ...........................................................................................................................................................................................................................Exhibit Hall Stage
2:30 pm – 3:00 pm Powerex, Inc. Industrial Seminar .................................................................................................................................................................................................................Exhibit Hall Stage
3:00 pm – 3:30 pm Allegro MicroSystems, LLC Industrial Seminar .........................................................................................................................................................................................Exhibit Hall Stage
3:30 pm – 5:00 pm Poster Session III .................................................................................................................................................................................................................................................... Exhibit Hall A
4:15 pm – 4:30 pm PM Break .................................................................................................................................................................................................................................................................. Exhibit Hall A
5:00 pm – 5:30 pm Ingersoll Rand Industrial Seminar ................................................................................................................................................................................................................Exhibit Hall Stage
5:30 pm – 6:00 pm Littelfuse Industrial Seminar ..........................................................................................................................................................................................................................Exhibit Hall Stage
Sunday, September 157:00 am – 7:00 pm Registration ........................................................................................................................................................................................................................................................................Lobby A
Tutorials Group 1 • 8:00 am – 12:00 pm
8 • 2013 IEEE Energy Conversion Congress & Exposition®
Schedule-at-a-Glance
102
S76: Wireless Power
Transfer I
103/105
S77: Power Quality
104/106
S78: Wind Energy: DFIG Control and Operation
107/109
S79: Distributed
Generation I
108
S80: DC-DC Isolated II
110/112
S81: AC-AC Converters
111/113
S82: Power Converters for Photovoltaics
201
S83: Maximum Power Point
Tracking I
203
S84: Power Converters for Electric Drives
205
S85: Magnetic Bearings and Bearlingless
Machines
207
S86: Diagnostics and Fault Analysis
of Electric Machines I
210/212
S87: Converter-level Power
Electronic Device Integration
102
S88: Wireless Power
Transfer II
103/105
S89: HVDC and FACTS
104/106
S90: Wind Farm Connection
107/109
S91: Distributed
Generation II
108
S92: Converter Applications
110/112
S93: Matrix Converters
111/113
S94: Single Phase DC to
AC Inverters I
201
S95: Maximum Power Point Tracking II
203
S96: Drive Topologies and Packaging for
HEVs
205
S97: Noise and Vibration
in Electric Machines
207
S98: IPM Machines II
210/212
S99: Power Electronic
Modules III
102
S100: Wireless Power
Transfer III
103/105
S101: Grid Connected
Converters I
104/106
S102: Wind Energy
Converters
107/109
S103: Distributed
Generation III
108
S104: AC-DC Multi-phase II
110/112
S105: Multilevel
Converters II
111/113
S106: Single Phase DC to
AC Inverters II
201
S107: Lighting Technologies I
203
S108: Energy Efficient Motor
Drives
205
S109: Losses in Electrical Machines
207
S110: Axial Flux Machines
210/212
S111: Wide Bandgap Semi-conductors III
102
S112: Wireless Power
Transfer IV
103/105
S113: Grid Connected
Converters II
104/106
S114: Wind Energy
Technologies
107/109
S115: AC-DC Multi-phase III
108
S116: Modular Multilevel
Converters
110/112
S117: Single Phase AC-DC
111/113
S118: Single Phase DC to
AC Inverters III
201
S119: Lighting Technologies II
203
S120: Model-based
Sensorless Control
205
S121: High Frequency
Effects in Electric Machines
207
S122: Diagnostics and Fault Analysis
of Electric Machines II
210/212
S123: Gallium Nitride Devices
102
S54: Charging Systems
103/105
SS5: Recent Advances
in Switched Capacitor Circuits I
104/106
S55: PV Generation III
107/109
S56: Microgrid Control
108
S57: Converters EMI
110/112
S58: Power Converters for
Renewable Energy
Applications I
111/113
S59: Multilevel Converters I
201
S60: Hardware-in-the-loop, Simulation,
and Hardware Issues
203
S61: Direct Torque Control
205
S62: DC-DC Non-isolated III
207
S63: Synchronous Reluctance Machines
210/212
S64: Passive Components
102
S65: Special Power
Converters in Transportation
103/105
SS6: Recent Advances
in Switched Capacitor Circuits II
104/106
S66: PV Converters
107/109
S67: Control Under
Unbalanced Grid Conditions
108
S68: AC-DC Multi-phase I
110/112
S69: Power Converters for
Renewable Energy
Applications II
111/113
S70: Resonant DC-DC
201
S71: Control Issues in
Electric Drives
203
S72: Assorted Issues in
Electric Drives
205
S73: Modeling and Control V
207
S74: Magnetic Gears
210/212
S75: Thermal Management
102
SS4: Advances in Wireless Power
for Electric Vehicles II
103/105
S43: Multilevel Converter Topologies
104/106
S44: PV Generation II
107/109
S45: Microgrids
Systems
108
S46: Converter Modeling and
Control IV
110/112
S47: Power Converters for Transportation Applications II
111/113
S48: Power Converters for Utility
Applications II
201
S49: Current Regulation in
Drives
203
S50: High Power Drives and
Multilevel Power Converters
205
S51: Thermal Analysis
of Electric Machines
207
S52: PM Machines
210/212
S53: Wide Bandgap Semi-conductors II
9:40 am – 10:00 am AM Break ............................................................................................................................................................................................................................................................................Lobby A
Oral Sessions • 10:00 am – 11:40 am
102
SS3: Advances in Wireless Power
for Electric Vehicles I
103/105
S32: Control of Multilevel Converters II
104/106
S33: PV Generation I
107/109
S34: Microgrids
108
S35: Converter Modeling and
Control III
110/112
S36: Power Converters for Transportation Applications I
111/113
S37: Power Converters for Utility
Applications I
201
S38: Fault Detection and Fault Tolerant
Drives
203
S39: Predictive Control of
Drives
205
S40: Non-conventional
Electric Machines
207
S41: IPM Machines I
210/212
S42: Power Electronic Modules II
Wednesday, September 187:00 am – 7:00 pm Registration ........................................................................................................................................................................................................................................................................Lobby A
Oral Sessions • 8:00 am – 9:40 am
11:40 am – 1:30 pm Lunch on Own
Oral Sessions • 1:30 pm – 3:10 pm
3:10 pm – 3:30 pm PM Break ............................................................................................................................................................................................................................................................................Lobby A
Oral Sessions • 3:30 pm – 5:10 pm
7:00 pm – 9:00 pm ECCE Banquet .................................................................................................................................................................................................................................................Mile High Ballroom
Thursday, September 197:00 am – 3:00 pm Registration ........................................................................................................................................................................................................................................................................Lobby A
Oral Sessions • 8:00 am – 9:40 am
9:40 am – 10:00 am AM Break ............................................................................................................................................................................................................................................................................Lobby A
Oral Sessions • 10:00 am – 11:40 am
3:20 pm – 3:40 pm PM Break ............................................................................................................................................................................................................................................................................Lobby A
Oral Sessions • 3:30 pm – 5:10 pm
110/112
Renewable Energy Technologies
107/109
Emerging Converter Design Technologies
Tuesday, September 17 (Continued)Townhall Meetings • 7:30 pm – 9:00 pm
12:00 pm – 1:30 pm Awards Lunch ................................................................................................................................................................................................................................................Mile High Ballroom
Oral Sessions • 1:30 pm – 3:10 pm
2013 IEEE Energy Conversion Congress & Exposition® • 9
10 • 2013 IEEE Energy Conversion Congress & Exposition® Detailed ScheduleDetailed Schedule
Room
: 103
/105
T1-1
: Sta
bilit
y of
Pow
erCo
nver
sion
Sys
tem
s
Room
: 104
/106
T1-2
: Adv
ance
d Po
wer
Se
mic
ondu
ctor
s: A
rt o
f Con
trol
, Fr
om T
heor
y to
Pra
ctic
e
Room
: 108
T1-3
: Mod
el P
redi
ctiv
e Co
ntro
l of
Indu
stri
al D
rive
s
Room
: 107
/109
T1-4
: Tes
ting
and
Dia
gnos
tics
of
Indu
ctio
n M
achi
nes
in a
n In
dust
rial
En
viro
nmen
t
12:0
0 pm
– 1
:00
pm
Lunc
h on
Ow
n
Tu
tori
als
Gro
up 2
• 1
:00
pm –
5:0
0 pm
Room
: 103
/105
T2-1
: Mat
rix
Conv
erte
rs:
Impl
emen
tatio
n an
d In
dust
rial
A
pplic
atio
ns
Room
: 104
/106
T2-2
: Cha
ract
eris
tics
and
App
licat
ion
of IG
BT
Pow
er
Mod
ules
Room
: 108
T2-3
: Pow
er E
lect
roni
cs S
olut
ions
fo
r Ele
ctri
c an
d Pl
ug-i
n H
ybri
d El
ectr
ic V
ehic
le B
atte
ry C
harg
ing
and
Ener
gy M
anag
emen
t
Room
: 107
/109
T2-4
: The
Rol
e of
The
rmal
Si
mul
atio
n in
Ele
ctri
c M
achi
ne
Opt
imiz
atio
n
Room
: 102
S1: M
arin
e an
d A
eros
pace
sy
stem
s
Perfo
rman
ce
Eval
uatio
n on
3-
phas
e Bu
ck-
type
PW
M
Rect
ifier
s w
ith
Inte
grat
ed a
nd
Sym
met
rical
Boo
st
Conv
erte
r Usi
ng
SIC
Mos
fets
for
Airc
raft
Appl
icat
ions
Med
ium
Vol
tage
Cu
rren
t Sou
rce
Conv
erte
r Driv
es
for M
arin
e Pr
opul
sion
Sy
stem
usi
ng a
Du
al-w
indi
ng
Sync
hron
ous
Mac
hine
Room
: 104
/106
S2: R
enew
able
En
ergy
Sto
rage
New
Con
trol
Stra
tegy
for
Bidi
rect
iona
l LL
C Re
sona
nt
Conv
erte
r in
Ener
gy S
tora
ge
Syst
ems
Expe
rimen
tal
Verif
icat
ion
of
Flyw
heel
Pow
er
Leve
ling
Syst
em
Orie
nted
to L
ow
Cost
and
Gen
eral
Pu
rpos
e Us
e
Room
: 107
/109
S3: O
pera
tion
and
Cont
rol o
f DC-
grid
s
A Ge
nera
lized
Vo
ltage
Dro
op
Stra
tegy
for
Cont
rol o
f Mul
ti-te
rmin
al D
C gr
ids
Optim
izatio
n w
ith
Syst
em D
ampi
ng
Rest
orat
ion
for D
roop
Co
ntro
lled
DC-D
C Co
nver
ters
Room
: 108
S4: M
odul
atio
n of
Mul
tilev
el
Conv
erte
rs
Spac
e Ve
ctor
M
odul
atio
n fo
r Cas
cade
d As
ymm
etric
al
Mul
tilev
el
Conv
erte
rs U
nder
Fa
ult C
ondi
tions
Phas
e-sh
ifted
Pu
lse-
wid
th-
ampl
itude
M
odul
atio
n fo
r Qua
si-Z
-so
urce
Cas
cade
M
ultil
evel
Inve
rter
Appl
ied
to P
V Po
wer
Sys
tem
s
Room
: 110
/112
S5: C
onve
rter
M
odel
ing
and
Cont
rol I
V2 C
ontro
l w
ith C
apac
itor
Curr
ent R
amp
Com
pens
atio
n us
ing
Loss
less
Ca
paci
tor C
urre
nt
Sens
ing
Stat
e-M
achi
ne
Real
izatio
n of
Se
cond
-ord
er
Slid
ing-
mod
e Co
ntro
l for
Sy
nchr
onou
s Bu
ck D
C-DC
Co
nver
ters
Room
: 111
/113
S6: D
C-D
C Is
olat
ed I
Piez
oele
ctric
Tr
ansf
orm
er-
base
d DC
-DC
Conv
erte
r with
im
prov
ed B
urst
-m
ode
Cont
rol
Cycl
e-by
-cyc
le
Aver
age
Inpu
t Cu
rren
t Sen
sing
M
etho
d fo
r LL
C Re
sona
nt
Topo
logi
es
Room
: 201
SS1:
Pro
duct
s an
d Se
rvic
e Se
ssio
n I
Dy-fr
ee R
are
Earth
Mag
nets
ASIC
Bas
ed
Curr
ent
Tran
sduc
ers
Room
: 203
S7: D
rive
Con
trol
To
pics
in
Tran
spor
tatio
n A
pplic
atio
ns
An A
ccur
ate
Torq
ue C
ontro
l of
Per
man
ent
Mag
net
Brus
hles
s M
otor
usi
ng
Low
-res
olut
ion
Hall-
effe
ct
Sens
ors
for L
ight
El
ectri
c Ve
hicl
e Ap
plic
atio
ns
Dyna
mic
DC-
link
Volta
ge
Adap
tatio
n fo
r The
rmal
M
anag
emen
t of
Trac
tion
Driv
es
Room
: 205
S8: G
rid
Inte
grat
ion
of
Win
d En
ergy
Med
ium
Vol
tage
In
verte
r to
Esta
blis
h Gr
id
Inte
rface
and
Pr
ovid
e An
cilla
ry
Supp
ort f
or D
C Di
strib
uted
Win
d Fa
rms
Reso
nanc
e Is
sues
and
Act
ive
Dam
ping
in H
VAC
Grid
-con
nect
ed
Offs
hore
Win
d Fa
rm
Room
: 207
S9: J
imm
ie J
. Ca
they
Mem
oria
l Se
ssio
n: In
duct
ion
mac
hine
s
Effic
ienc
y De
term
inat
ion
of C
onve
rter-
fed
Indu
ctio
n M
otor
s:
Wai
ting
for t
he
IEC
6003
4-2-
3 St
anda
rd
A Gr
id-c
onne
cted
In
duct
ion
Mac
hine
Cap
able
of
Ope
ratio
n at
Uni
ty a
nd
Lead
ing
Pow
er
Fact
or
10:2
0 am
– 1
0:45
am
10:4
5 am
– 1
1:10
am
Room
: 110
/112
T1-5
: Sw
itche
d Re
luct
ance
M
achi
nes:
Des
ign
and
Cont
rol
Room
: 111
/113
T1-6
: Dyn
amic
Mod
elin
g of
Re
new
able
Ene
rgy
Gen
erat
or a
nd
Pow
er P
lant
Room
: 110
/112
T2-5
: Per
man
ent M
agne
t Fu
ndam
enta
ls
Room
: 111
/113
T2-6
: Pho
tovo
ltaic
Pan
els:
Te
chno
logy
, Mod
elin
g an
d Ch
arac
teri
satio
n
Sund
ay, S
epte
mbe
r 15
7:00
am
– 7
:00
pm
Regi
stra
tion
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
...Lo
bby
A
Tu
tori
als
Gro
up 1
• 8
:00
am –
12:
00 p
m
Room
: 210
/212
S10:
Pow
er
Elec
tron
ic
Mod
ules
I
Char
acte
rizat
ion
of 4
.5 k
V/2.
4 kA
Pre
ss P
ack
IGBT
Incl
udin
g Co
mpa
rison
with
IG
CT
A N
ovel
IGBT
pa
ckag
e to
re
duce
cur
rent
im
bala
nce
with
pi
nfin
bas
epla
te
4:00
pm
– 5
:00
pm
New
com
ers
Sess
ion .
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
Room
: 210
/212
5:00
pm
– 7
:00
pm
Ope
ning
Rec
eptio
n ....
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
....M
ile H
igh
Pref
unct
ion
Mon
day,
Sep
tem
ber 1
67:
00 a
m –
7:0
0 pm
Re
gist
ratio
n ...
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
Lobb
y A
8:00
am
– 1
0:00
am
Pl
enar
y Se
ssio
n ....
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
..Mile
Hig
h Ba
llroo
m
10:0
0 am
– 1
0:20
am
A
M B
reak
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
.Lob
by A
O
ral S
essi
ons
• 10
:20
am –
12:
00 p
m
2013 IEEE Energy Conversion Congress & Exposition® • 11Detailed Schedule
Room
: 102
S1: M
arin
e an
d A
eros
pace
sy
stem
s
Room
: 104
/106
S2: R
enew
able
En
ergy
Sto
rage
Room
: 107
/109
S3: O
pera
tion
and
Cont
rol o
f DC-
grid
s
Room
: 108
S4: M
odul
atio
n of
Mul
tilev
el
Conv
erte
rs
Room
: 110
/112
S5: C
onve
rter
M
odel
ing
and
Cont
rol I
Room
: 111
/113
S6: D
C-D
C Is
olat
ed I
Room
: 201
SS1:
Pro
duct
s an
d Se
rvic
e Se
ssio
n I
Room
: 203
S7: D
rive
Con
trol
To
pics
in
Tran
spor
tatio
n A
pplic
atio
ns
Room
: 205
S8: G
rid
Inte
grat
ion
of W
ind
Ener
gy
Room
: 207
S9: J
imm
ie J
. Ca
they
Mem
oria
l Se
ssio
n: In
duct
ion
mac
hine
s
Room
: 210
/212
S10:
Pow
er
Elec
tron
ic
Mod
ules
I
Cons
ider
atio
n of
Act
ive-
front
-en
d Re
ctifi
er
for E
lect
ric
Prop
ulsi
on N
avy
Ship
Tim
e-De
lay
Effe
cts
in a
HIL
Ai
rcra
ft Po
wer
Sy
stem
Em
ulat
or
Quan
titat
ive
and
Qual
itativ
e Ev
alua
tion
of F
lexi
ble
Dist
ribut
ion
of E
nerg
y an
d St
orag
e Re
sour
ces
Dete
rmin
atio
n of
the
Optim
al
Capa
city
Bas
ed
on a
Life
Tim
e Co
st F
unct
ion
in
Win
d Fa
rm
Desi
gn a
nd
Verif
icat
ion
of S
mar
t and
Sc
alab
le D
C M
icro
grid
s fo
r Em
ergi
ng
Regi
ons
Usin
g Ap
pare
nt
Resi
stan
ce
for F
ault
Disc
rimin
atio
n in
M
ulti-
term
inal
DC
Syst
ems
Optim
izatio
n of
th
e Pu
lse-
wid
th-
mod
ulat
ion
Stra
tegy
for
Redu
ndan
t and
N
on-r
edun
dant
M
ulti-
leve
l Ca
scad
ed-c
ell
Conv
erte
rs
Mod
elin
g an
d Vo
ltage
Ba
lanc
ing
Met
hod
for
Mod
ular
M
ultil
evel
Co
nver
ter
Ripp
le
Min
imiza
tion
in A
sym
met
ric
Mul
tipha
se
Inte
rleav
ed D
C-DC
Sw
itchi
ng
Conv
erte
rs
Bang
-Ban
g Ch
arge
Con
trol
for L
LC R
eson
ant
Conv
erte
rs
Desi
gn o
f an
Inte
rleav
ed
Isol
ated
Boo
st
Conv
erte
r w
ith C
oupl
ed
Indu
ctor
s fo
r Hi
gh S
tep-
up
Appl
icat
ions
A Se
ries-
inpu
t Fo
rwar
d Co
nver
ter
with
Sha
red
RCD
Cell
for
High
-rel
iabi
lity
and
Wid
e In
put
Volta
ge R
ange
Ap
plic
atio
ns
450M
VA G
CT-
STAT
COM
fo
r Sta
bilit
y Im
prov
emen
t an
d Ov
er-v
olta
ge
Supp
ress
ion
Over
view
of
a F
amily
Po
wer
Sta
ck
Deve
lopm
ent
Proc
ess
Supp
ress
ion
Met
hod
of R
isin
g DC
Vol
tage
for
the
halt
sequ
ence
of
an
inve
rter
in th
e m
otor
re
gene
ratio
n
Impa
ct o
f Po
sitio
n Se
nsor
Ac
cura
cy o
n th
e Pe
rform
ance
of
IPM
Driv
es
Hybr
id C
ontro
l St
rate
gy fo
r a
Doub
ly F
ed
Indu
ctio
n Ge
nera
tor i
n M
ediu
m V
olta
ge
Win
d Po
wer
Sy
stem
und
er
Unba
lanc
ed G
rid
Cond
ition
s
Anal
ysis
, De
sign
, and
Im
plem
enta
tion
of M
ulti-
func
tion
Inte
rface
d In
verte
rs fo
r Di
strib
uted
Ge
nera
tion
Anal
ysis
of
Puls
atin
g To
rque
in
Squ
irrel
Ca
ge In
duct
ion
Mac
hine
s by
In
vest
igat
ing
Stat
or S
lot
and
Roto
r Bar
Di
men
sion
s fo
r Tra
ctio
n Ap
plic
atio
ns
Fini
te E
lem
ent
Anal
ysis
of E
nd
Ring
Impe
danc
e in
Squ
irrel
Ca
ge In
duct
ion
Mac
hine
s
Devi
ce
Char
acte
rizat
ion
and
Perfo
rman
ce
of 1
200V
/45A
SiC
JF
ET
Sim
ple
Spic
e Ba
sed
Mod
elin
g Pl
atfo
rm fo
r 4.5
kV
Pow
er IG
BT
Mod
ules
Room
: 102
S11:
Bat
tery
an
d B
atte
ry
Man
agem
ent
Cell
Bala
ncin
g Co
ntro
l Usi
ng
Adju
sted
Filt
ers
in F
lyba
ck
Conv
erte
r with
Si
ngle
Sw
itch
Onlin
e SO
C an
d SO
H Es
timat
ion
for M
ultic
ell
Lith
ium
-ion
Batte
ries
Base
d on
an
Adap
tive
Hybr
id B
atte
ry
Mod
el a
nd
Slid
ing-
mod
e Ob
serv
er
Room
: 104
/106
S12:
Wav
e En
ergy
Te
chno
logy
Adap
tive
Dam
ping
Pow
er
Take
-off
Cont
rol
for a
Thr
ee-b
ody
Wav
e En
ergy
Co
nver
ter
Mod
elin
g of
a
Two-
body
W
ave
Ener
gy
Conv
erte
r Driv
en
by S
pect
ral
JON
SWAP
W
aves
Room
: 107
/109
S13:
Mod
ular
To
polo
gies
for
Solid
-sta
te
Tran
sfor
mer
s
Optim
um N
umbe
r of
Cas
cade
d Ce
lls fo
r Hig
h-po
wer
Med
ium
-vo
ltage
Mul
tilev
el
Conv
erte
rs
A M
odul
ar
Mul
tilev
el
Conv
erte
r-ba
sed
Pow
er E
lect
roni
c Tr
ansf
orm
er
Room
: 108
S14:
Con
trol
of
Mul
tilev
el
Conv
erte
rs I
Anal
ysis
and
Op
erat
ion
of M
odul
ar
Mul
tilev
el
Conv
erte
rs w
ith
Phas
e-sh
ifted
Ca
rrie
r PW
M
Deco
uple
d Co
ntro
l of a
n 3-
phas
e to
3-
phas
e M
odul
ar
Mul
tilev
el
Conv
erte
r
Room
: 110
/112
S15:
Sta
bilit
y an
d Po
wer
Qua
lity
Optim
izatio
n of
LCL
Filt
er
base
d on
THD
Es
timat
ion
Mod
el
Stab
ility
Issu
es o
f Z+
Z or
Y+Y
Typ
e Ca
scad
e Sy
stem
Room
: 111
/113
S16:
DC-
DC
Non
-is
olat
ed I
Buck
der
ived
co
nver
ters
ba
sed
on g
alliu
m
nitri
de d
evic
es
for E
nvel
ope
Trac
king
ap
plic
atio
ns
Switc
hing
Pe
rform
ance
Co
mpa
rison
of
the
SiC
JFET
and
th
e Si
C JF
ET/
Si M
OSFE
T Ca
scod
e Co
nfig
urat
ion
Room
: 201
SS2:
Pro
duct
s an
d Se
rvic
e Se
ssio
n II
Tran
sfer
Mol
ded
IGBT
for H
ybrid
Ve
hicl
e w
ith
Impr
oved
Cyc
ling
Dura
bilit
y
Stan
dard
Pa
ckag
es a
nd
Feat
ures
for D
IP-
IPM
s in
Sm
all
Mot
or D
rive
Appl
icat
ions
Room
: 203
S17:
Alfi
o Co
nsol
i M
emor
ial S
essi
on:
Hig
h Fr
eque
ncy
Inje
ctio
n Se
nsor
less
Con
trol
Sens
orle
ss
Cont
rol o
f Do
ubly
-fed
Indu
ctio
n Ge
nera
tors
Ba
sed
on S
tato
r Hi
gh F
requ
ency
Si
gnal
Inje
ctio
n
Arbi
trary
In
ject
ion
for
Perm
anen
t M
agne
t Sy
nchr
onou
s M
achi
nes
with
Mul
tiple
Sa
lienc
ies
Room
: 205
S18:
Gri
d In
tegr
atio
n of
So
lar P
V
Mod
el P
redi
ctiv
e Co
ntro
l of G
rid-
conn
ecte
d In
verte
rs fo
r PV
Syst
ems
with
Fl
exib
le P
ower
Re
gula
tion
and
Switc
hing
Fr
eque
ncy
Redu
ctio
n
A Si
ngle
-sta
ge
Buck
-Boo
st
Thre
e-le
vel
Neu
tral-p
oint
-cl
ampe
d In
verte
r fo
r the
Grid
-tied
Ph
otov
olta
ic
Pow
er
Gene
ratio
n
Room
: 207
S19:
IPM
M
achi
nes
for
Elec
tric
Veh
icle
s
A Co
mpa
rison
of
IPM
Tra
ctio
n M
achi
nes
with
Di
ffere
nt P
M
Mat
eria
ls
Adva
nced
Hi
gh P
ower
-De
nsity
Inte
rior
Perm
anen
t M
agne
t Mot
or
for T
ract
ion
Appl
icat
ions
Room
: 210
/212
S20:
Mag
netic
M
ater
ials
and
de
sign
Mea
sure
d Pe
rform
ance
and
M
icro
-fabr
icat
ion
of R
acet
rack
Po
wer
Indu
ctor
s
Lam
inat
ed L
ow
Tem
pera
ture
Co
-fire
d Ce
ram
ic F
errit
e M
ater
ials
and
the
Appl
icat
ions
for
High
Cur
rent
POL
Co
nver
ters
12:0
0 pm
– 1
:30
pm
Lunc
h on
Ow
n
O
ral S
essi
ons
• 1:
30 p
m –
3:3
5 pm
11:1
0 am
– 1
1:35
am
11:3
5 am
– 1
2:00
pm
1:30
pm
– 1
:55
pm
1:55
pm
– 2
:20
pm
Mon
day,
Sep
tem
ber 1
6 (C
ontin
ued)
O
ral S
essi
ons
• 10
:20
am –
12:
00 p
m (C
ontin
ued)
12 • 2013 IEEE Energy Conversion Congress & Exposition® Detailed Schedule
Desi
gn
Cons
ider
atio
ns
for H
ybrid
Ba
ttery
/Su
perc
apac
tior
Syst
ems
for
Puls
ed P
ower
On-li
ne A
dapt
ive
Tuni
ng o
f a
Lith
ium
-ion
Batte
ry C
ell
Stat
e of
Cha
rge
Obse
rver
Effe
cts
of P
ulse
an
d DC
Cha
rgin
g on
Lith
ium
Iron
Ph
osph
ate
(LiF
ePO4
) Ba
tterie
s
Expe
rimen
tal
Test
ing
and
Mod
el V
alid
atio
n fo
r Oce
an
Wav
e En
ergy
Ha
rves
ting
Buoy
s
Pow
er
Conv
erte
r and
Co
ntro
l Sys
tem
De
velo
ped
in th
e Oc
ean
Sent
inel
In
stru
men
tatio
n Bu
oy fo
r Tes
ting
Wav
e En
ergy
Co
nver
ters
Med
ium
-vol
tage
Po
wer
Con
verte
r In
terfa
ce fo
r W
ave
Drag
on
Wav
e En
ergy
Co
nver
sion
Sy
stem
A Co
st E
ffect
ive
Pow
er S
harin
g St
rate
gy fo
r a
Casc
aded
M
ultil
evel
Co
nver
ter B
ased
So
lid S
tate
Tr
ansf
orm
er
Revi
ew o
f M
odul
ar P
ower
Co
nver
ters
So
lutio
ns
for S
mar
t Tr
ansf
orm
er
in D
istri
butio
n Sy
stem
Pow
er F
low
An
alys
is fo
r 3-
port
3-ph
ase
Dual
Act
ive
Brid
ge D
C-DC
Co
nver
ter a
nd
Desi
gn V
alid
atio
n Us
ing
High
Fr
eque
ncy
Plan
ar
Tran
sfor
mer
Expe
rimen
tal
Verif
icat
ion
of
Dire
ct D
ead-
time
Cont
rol a
nd
DC-li
nk N
eutra
l-po
int B
alan
cing
of
a T
hree
Le
vel N
eutra
l-po
int-c
lam
ped
(3L-
NPC
) VSC
Capa
cito
r Ba
lanc
e in
a
Five
-leve
l Bas
ed
Half-
brid
ge
Conv
erte
r by
Use
of a
Mix
ed
Activ
e-ce
ll
Curr
ent C
ontro
l of
a P
hase
-Sh
ifted
-PW
M
STAT
COM
Usi
ng
the
Mod
ular
M
ultil
evel
Ca
scad
e Co
nver
ter B
ased
on
Sin
gle-
star
Br
idge
-cel
ls
(MM
CC-S
SBC)
Mod
ified
Nor
m
Type
Sta
bilit
y Cr
iterio
n fo
r Ca
scad
e AC
Sy
stem
Stab
ility
Ana
lysi
s of
Dam
ping
Co
ntro
l to
Supp
ress
Filt
er
Reso
nanc
e in
M
ulti-
mod
ular
M
atrix
Con
verte
r
A Hy
brid
Da
mpi
ng M
etho
d fo
r LLC
L-fil
ter
Base
d Gr
id-ti
ed
Inve
rter w
ith a
Di
gita
l Filt
er a
nd
an R
C Pa
ralle
l Pa
ssiv
e Da
mpe
r
Impa
ct o
f Pa
rasi
tic
Elem
ents
on
the
Spur
ious
Tr
igge
ring
Puls
e in
Syn
chro
nous
Bu
ck C
onve
rter
High
Fre
quen
cy
Sync
hron
ous
Buck
Con
verte
r us
ing
GaN
-on-
SiC
HEM
Ts
Eval
uatio
n of
th
e La
gran
gian
M
etho
d fo
r De
rivin
g Eq
uiva
lent
Circ
uits
of
Inte
grat
ed
Mag
netic
Co
mpo
nent
s: A
Ca
se S
tudy
Usi
ng
the
Inte
grat
ed
Win
ding
Cou
pled
In
duct
or
Cree
All-
SiC
Pow
er M
odul
es
Enab
les
High
er
Perfo
rman
ce
Pow
er C
onve
rsio
n So
lutio
ns a
t a
Low
er S
yste
m
Cost
than
Sta
te-
of-th
e-ar
t Si I
GBT
Mod
ules
All S
iC P
ower
M
odul
e w
ith
Adva
nced
St
ruct
ure
and
its S
olar
Inve
rter
Appl
icat
ion
Boos
t Ind
ucto
rs,
Desi
gn fo
r Co
st a
nd L
oss
Min
imiza
tion
A Pu
lse
Inje
ctio
n Ba
sed
Sens
orle
ss
Posi
tion
Estim
atio
n M
etho
d fo
r a S
witc
hed
Relu
ctan
ce
Mac
hine
ove
r a
Wid
e Sp
eed
Rang
e
Initi
al R
otor
Po
sitio
n De
tect
ion
for
Delta
-con
nect
ed
Sync
hron
ous
Relu
ctan
ce
Mot
or
Low
-spe
ed
Posi
tion
Sens
orle
ss
Driv
e fo
r Hi
ghly
Effi
cien
t Pe
rman
ent
Mag
net
Sync
hron
ous
Mot
or w
ithou
t Ra
re-e
arth
M
etal
s
Miti
gatin
g Va
riabi
lity
of
High
Pen
etra
tion
Phot
ovol
taic
Sy
stem
s in
a
Com
mun
ity
Smar
t Mic
rogr
id
usin
g N
on-fl
at
Phot
ovol
taic
M
odul
es
Grid
Impa
cts
and
Miti
gatio
n M
easu
res
for
Incr
ease
d PV
Pe
netra
tion
Leve
ls u
sing
Ad
vanc
ed
PV In
verte
r Re
gula
tion
Cont
rolli
ng o
f M
ediu
m V
olta
ge
Pow
er-fa
ctor
of
Pho
tovo
ltaic
Po
wer
Pla
nts
from
the
Low
Vo
ltage
Sid
e
Effic
ienc
y Co
ntou
rs
and
Loss
M
inim
izatio
n ov
er
a Dr
ivin
g Cy
cle
of a
Var
iabl
e-flu
x Fl
ux-in
tens
ifyin
g In
terio
r Pe
rman
ent
Mag
net M
achi
ne
Desi
gn a
nd
Anal
ysis
of I
PM
Mac
hine
with
Bar
W
ound
Fra
ctio
nal
Slot
Dis
tribu
ted
Win
ding
for
Auto
mot
ive
Trac
tion
Appl
icat
ion
Roto
r Stru
ctur
e in
50
kW S
poke
-ty
pe In
terio
r Pe
rman
ent
Mag
net
Sync
hron
ous
Mot
or w
ith
Ferr
ite
Perm
anen
t M
agne
ts fo
r Au
tom
otiv
e Ap
plic
atio
ns
Com
plex
Pe
rmea
bilit
y M
easu
rem
ents
of
Rad
ial-
anis
otro
py T
hin-
film
Mag
netic
To
roid
al C
ores
CCTT
-cor
e Sp
lit-w
indi
ng
Inte
grat
ed
Mag
netic
In
terle
aved
Bo
ost C
onve
rter
for R
enew
able
En
ergy
Ap
plic
atio
ns
Leak
age
Indu
ctan
ce
Calc
ulat
ion
for P
lana
r Tr
ansf
orm
ers
with
a M
agne
tic
Shun
t
Room
: 102
S11:
Bat
tery
an
d B
atte
ry
Man
agem
ent
Room
: 104
/106
S12:
Wav
e En
ergy
Te
chno
logy
Room
: 107
/109
S13:
Mod
ular
To
polo
gies
for
Solid
-sta
te
Tran
sfor
mer
s
Room
: 108
S14:
Con
trol
of
Mul
tilev
el
Conv
erte
rs I
Room
: 110
/112
S15:
Sta
bilit
y an
d Po
wer
Qua
lity
Room
: 111
/113
S16:
DC-
DC
Non
-is
olat
ed I
Room
: 201
SS2:
Pro
duct
s an
d Se
rvic
e Se
ssio
n II
Room
: 203
S17:
Alfi
o Co
nsol
i M
emor
ial S
essi
on:
Hig
h Fr
eque
ncy
Inje
ctio
n Se
nsor
less
Con
trol
Room
: 205
S18:
Gri
d In
tegr
atio
n of
So
lar P
V
Room
: 207
S19:
IPM
M
achi
nes
for
Elec
tric
Veh
icle
s
Room
: 210
/212
S20:
Mag
netic
M
ater
ials
and
de
sign
2:20
pm
– 2
:45
pm
2:45
pm
– 3
:10
pm
4:00
pm
– 6
:30
pm
Exhi
bit H
all O
pen .
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
.Exh
ibit
Hall
A
4:00
pm
– 6
:30
pm
Expo
Rec
eptio
n Su
ppor
ted
by O
PAL
RT ..
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
...Ex
hibi
t Hal
l A
4:00
pm
– 6
:30
pm
Stud
ent D
emon
stra
tions
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
..Ex
hibi
t Hal
l A
5:00
pm
– 6
:30
pm
Post
er S
essi
on I .
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
...Ex
hibi
t Hal
l A
7:00
pm
– 9
:30
pm
Indu
stry
Stu
dent
Din
ner S
uppo
rted
by G
E Gl
obal
Res
earc
h an
d N
exte
er A
utom
otiv
e ....
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
...M
ile H
igh
Pref
unct
ion
3:10
pm
– 3
:35
pm
Mon
day,
Sep
tem
ber 1
6 (C
ontin
ued)
O
ral S
essi
ons
• 1:
30 p
m –
3:3
5 pm
(Con
tinue
d)
2013 IEEE Energy Conversion Congress & Exposition® • 13Detailed Schedule
Room
: 102
S21:
Ele
ctri
c D
rive
trai
n
Engi
ne-g
ener
ator
Si
zing
for R
e-en
gine
erin
g an
El
ectri
c Ve
hicl
e in
to a
n Ex
tend
ed
Rang
e El
ectri
c Ve
hicl
e
Relu
ctan
ce
Sync
hron
ous
and
Fiel
d In
tens
ified
-PM
Mot
ors
for
Varia
ble-
gear
El
ectri
c Ve
hicl
e Dr
ives
Off-v
ehic
le
Eval
uatio
n of
Ac
tive
Osci
llatio
n Da
mpi
ng
Sche
mes
Econ
omic
In
fluen
ce o
f Pr
olon
ging
Fu
el C
ell S
tack
Li
fetim
e of
Fue
l Ce
ll Hy
brid
Ve
hicl
es B
ased
on
Opt
imal
Co
ntro
l The
ory
Room
: 104
/106
S22:
Ene
rgy
Stor
age
and
PF
Cont
rol
Capa
city
Fad
e Es
timat
ion
in
Elec
tric
Vehi
cles
Li
thiu
m-io
n Ba
tterie
s us
ing
Artif
icia
l Neu
ral
Net
wor
ks
Impr
oved
Pe
rform
ance
of
a D
C-DC
Co
nver
ter f
or
Supe
rcap
acito
r En
ergy
Sto
rage
Sy
stem
Acce
lera
ted
Life
time
Test
ing
Met
hodo
logy
fo
r Life
time
Estim
atio
n of
Li
thiu
m-io
n Ba
tterie
s Us
ed in
Au
gmen
ted
Win
d Po
wer
Pla
nts
Rapi
d Bi
dire
ctio
nal
Pow
er F
low
of
Supe
rcap
acito
r En
ergy
Sto
rage
Sy
stem
s th
roug
h Gr
id-ti
ed In
verte
rs
for I
mpr
oved
Re
new
able
s In
tegr
atio
n
Room
: 107
/109
S23:
Des
ign
and
Act
ive
Dam
ping
of
Filt
ers
for G
rid
Conv
erte
rs
Disc
rete
-tim
e Op
timal
Act
ive
Dam
ping
of L
CL
Reso
nanc
e in
Gr
id C
onne
cted
Co
nver
ters
by
Prop
ortio
nal
Capa
cito
r Cur
rent
Fe
edba
ck
Desi
gn o
f the
LC
L+Tr
ap F
ilter
fo
r the
Tw
o-le
vel
VSC
Inst
alle
d in
a
Larg
e-sc
ale
Wav
e Po
wer
Pl
ant
LC F
ilter
Des
ign
for O
n-gr
id
and
Off-g
rid
Dist
ribut
ed
Gene
ratin
g Un
its
Robu
st
Capa
cito
r-cu
rren
t-fee
dbac
k Ac
tive
Dam
ping
fo
r the
LCL
-type
Gr
id-c
onne
cted
In
verte
r
Room
: 108
S24:
Con
vert
er
Mod
elin
g an
d Co
ntro
l II
Pass
ive
Canc
ella
tion
in
a Fl
ybac
k fo
r Ef
fect
ive
CM
Redu
ctio
n
SLR
Conv
erte
r De
sign
for M
ulti-
cell
Batte
ry
Char
ging
A St
eppi
ng O
n-tim
e Ad
just
men
t M
etho
d fo
r In
terle
avin
g Th
ree-
chan
nel
Criti
cal M
ode
Boos
t PFC
Co
nver
ter
Sym
met
rical
Tu
ning
for
Reso
nant
Co
ntro
llers
in
Inve
rter b
ased
M
icro
-grid
Ap
plic
atio
ns
Room
: 110
/112
S25:
3-p
hase
In
vert
ers
Harm
onic
El
imin
atio
n by
Ad
aptiv
e Ph
ase-
shift
Opt
imiza
tion
in In
terle
aved
Co
nver
ters
Puls
e W
idth
M
odul
atio
n of
Th
ree
Phas
e Sw
itche
d Bo
ost
Inve
rter
Dead
Tim
e Co
mpe
nsat
ion
Met
hod
Base
d on
Cur
rent
Rip
ple
Estim
atio
n
Activ
e Po
wer
Co
ntro
l for
M
inim
um
Switc
hing
of
3-p
hase
El
ectro
lytic
Ca
paci
tor-
less
PW
M C
onve
rter
Room
: 111
/113
S26:
DC-
DC
Non
-is
olat
ed II
Nov
el H
igh
Volta
ge
Conv
ersi
on R
atio
“R
ains
tick”
DC-
DC C
onve
rters
A Hy
brid
In
terle
aved
/Sw
itche
d-ca
paci
tor B
oost
Co
nver
ter
Mul
tiple
Co
nver
sion
Ra
tio R
eson
ant
Switc
hed-
capa
cito
r Co
nver
ter w
ith
Activ
e Ze
ro
Curr
ent D
etec
tion
The
DCM
St
abili
ty Is
sue
of V
olta
ge
Regu
lato
rs U
sing
a
Curr
ent-m
ode
Cons
tant
On-
time
Cont
rolle
r Con
trol
Room
: 201
S27:
Hig
h Po
wer
D
rive
s
Desi
gn
Chal
leng
es
of In
dust
rial
High
-pow
er
Conv
erte
rs w
ith
Low
Pul
se-r
atio
s
Perfo
rman
ce
Inve
stig
atio
n of
Hy
brid
Con
verte
r Sy
stem
s fo
r M
obile
Min
ing
Appl
icat
ions
Test
-Ben
ch
for V
ery
High
Po
wer
Var
iabl
e Fr
eque
ncy
Driv
es
Wor
king
und
er
Cons
train
ed G
rid
Cond
ition
s
Com
mon
-m
ode
Volta
ge
Redu
ctio
n fo
r M
ediu
m-v
olta
ge
Curr
ent S
ourc
e Co
nver
ters
by
Opt
imizi
ng
Switc
hing
Se
quen
ces
Room
: 203
S28:
Con
trol
Issu
es
in P
erm
anen
t M
agne
t Mot
or
Dri
ves
High
Fre
quen
cy
Inje
ctio
n-ba
sed
Stat
or F
lux
Link
age
and
Torq
ue E
stim
atio
n fo
r DB-
DTFC
Im
plem
enta
tion
on IP
MSM
s Co
nsid
erin
g Cr
oss-
satu
ratio
n Ef
fect
s
Varia
ble
Flux
M
achi
ne T
orqu
e Es
timat
ion
and
puls
atin
g To
rque
M
itiga
tion
Durin
g M
agne
tizat
ion
Stat
e M
anip
ulat
ion
Com
preh
ensi
ve
PM M
otor
Co
ntro
ller D
esig
n fo
r Ele
ctric
ally
As
sist
ed T
urbo
-ch
arge
r Sys
tem
s
Exte
nded
M
TPA
with
Cr
oss
Coup
ling
Indu
ctan
ces
for E
lect
rical
ly
Exci
ted
Sync
hron
ous
Mot
ors
Room
: 205
S29:
Win
d En
ergy
Sy
stem
s
Gear
box
and
Driv
etra
in
Mod
els
to S
tudy
Dy
nam
ic E
ffect
s of
Mod
ern
Win
d Tu
rbin
es
Desi
gn
Spec
ifica
tions
an
d Op
timis
atio
n of
a D
irect
ly G
rid-
conn
ecte
d PM
W
ind
Gene
rato
r
Sim
ulat
ion
Tool
to A
sses
s M
echa
nica
l an
d El
ectri
cal
Stre
sses
on
Win
d Tu
rbin
e Ge
nera
tors
A N
ew M
odul
ar
Flux
-sw
itchi
ng
Perm
anen
t M
agne
t Driv
e fo
r Lar
ge W
ind
Turb
ines
Room
: 207
S30:
SR
Mac
hine
s
Com
paris
on o
f Lo
w-c
ost W
ound
-fie
ld S
witc
hed-
flux
Mac
hine
s
Adap
tive
Flux
W
eake
ning
Con
trol
of S
witc
hed
Relu
ctan
ce
Mac
hine
s in
Rot
atin
g Re
fere
nce
Fram
e
Fini
te E
lem
ent
Base
d An
alyt
ical
M
odel
for
Cont
rolle
r De
velo
pmen
t of
Sw
itche
d Re
luct
ance
M
achi
nes
Desi
gn
Cons
ider
atio
ns
of S
witc
hed
Relu
ctan
ce
Mot
ors
with
Bi
pola
r Exc
itatio
n fo
r Low
To
rque
Rip
ple
Appl
icat
ions
Room
: 210
/212
S31:
Wid
e B
andg
ap
Sem
icon
duct
ors
I
Mod
elin
g of
a
1200
V 6
A S
iC
Bipo
lar J
unct
ion
Tran
sist
or
Real
Fie
ld
Mis
sion
Pro
file
Orie
nted
Des
ign
of a
SiC
-bas
ed
PV-in
verte
r Ap
plic
atio
n
Guid
elin
es fo
r De
velo
ping
Po
wer
Sta
ge
Layo
uts
usin
g N
orm
ally
-off
SiC
JFET
s Ba
sed
on
Para
sitic
Ana
lysi
s
Com
para
tive
Perfo
rman
ce
Eval
uatio
n of
Si
C Po
wer
De
vice
s fo
r Hig
h Te
mpe
ratu
re a
nd
High
Fre
quen
cy
Mat
rix C
onve
rter
8:00
am
– 8
:25
am
8:25
am
– 8
:50
am
Tues
day,
Sep
tem
ber 1
77:
00 a
m –
6:0
0 pm
Re
gist
ratio
n ...
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
Lobb
y A
O
ral S
essi
ons
• 8:
00 a
m –
9:4
0 am
9:00
am
– 6
:00
pm
Exhi
bit H
all O
pen .
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
.Exh
ibit
Hall
A
9:40
am
– 1
0:00
am
A
M B
reak
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
...Ex
hibi
t Hal
l A
10:0
0 am
– 1
1:30
am
Po
ster
Ses
sion
II ...
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
Exhi
bit H
all A
11:3
0 am
– 1
2:00
pm
Fo
rd M
otor
Com
pany
Indu
stri
al S
emin
ar ...
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
.....E
xhib
it Ha
ll St
age
12:0
0 pm
– 2
:00
pm
Lunc
h....
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
.Exh
ibit
Hall
A
2:00
pm
– 2
:30
pm
OPA
L RT
Indu
stri
al S
emin
ar ...
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
...Ex
hibi
t Hal
l Sta
ge
2:30
pm
– 3
:00
pm
Pow
erex
, Inc
. Ind
ustr
ial S
emin
ar ..
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
Exhi
bit H
all S
tage
3:00
pm
– 3
:30
pm
Alle
gro
Mic
roSy
stem
s, L
LC In
dust
rial
Sem
inar
.....
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
...Ex
hibi
t Hal
l Sta
ge
3:30
pm
– 5
:00
pm
Post
er S
essi
on II
I ....
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
...Ex
hibi
t Hal
l A
8:50
am
– 9
:15
am
9:15
am
– 9
:40
am
14 • 2013 IEEE Energy Conversion Congress & Exposition® Detailed Schedule
Room
: 210
/212
S42:
Pow
er
Elec
tron
ic
Mod
ules
II
High
Fre
quen
cy
Inte
grat
ed P
oint
of
Loa
d (P
OL)
Mod
ule
with
PC
B Em
bedd
ed
Indu
ctor
Su
bstra
te
Com
pone
nt
Prox
imity
Ef
fect
s in
Hig
h De
nsity
and
Hi
gh S
witc
hing
Sp
eed
Pow
er
Conv
erte
rs
Para
sitic
M
odel
ing
for A
ccur
ate
Indu
ctiv
e Sw
itchi
ng
Sim
ulat
ion
of
Conv
erte
rs
usin
g Si
C De
vice
s
Deta
iled
Deriv
atio
n an
d M
inim
izatio
n of
th
e Eq
uiva
lent
Pa
rasi
tic
Capa
cita
nce
of
a Hi
gh V
olta
ge
Mul
tiplie
r Bas
ed
on th
e Co
mpl
ete
Mod
el
Room
: 110
/112
Rene
wab
le E
nerg
y Te
chno
logi
es
Room
: 107
/109
Emer
ging
Con
vert
er D
esig
n Te
chno
logi
es
Room
: 102
SS3:
Adv
ance
s in
W
irel
ess
Pow
er
for E
lect
ric
Vehi
cles
I
A Pa
st, P
rese
nt
and
Futu
re
Pers
pect
ive
on W
irele
ss
Pow
er T
rans
fer
for E
lect
ric
Vehi
cles
The
Deve
lopm
ent
and
Depl
oym
ent o
f On
-line
Ele
ctric
Ve
hicl
es (O
LEV)
A Hi
gh
Perfo
rman
ce
50kW
Indu
ctiv
e Ch
arge
r for
El
ectri
c Bu
ses
ORN
L De
velo
pmen
ts
in S
tatio
nary
an
d Dy
nam
ic
Wire
less
Ch
argi
ng
Room
: 103
/105
S32:
Con
trol
of
Mul
tilev
el
Conv
erte
rs II
Repe
titiv
e Co
ntro
l Sch
eme
for C
ircul
atin
g Cu
rren
t Su
ppre
ssio
n in
Mod
ular
M
ultil
evel
Co
nver
ters
Aver
age
Pow
er
Bala
ncin
g Co
ntro
l of a
ST
ATCO
M
base
d on
the
Casc
aded
H-
brid
ge P
WM
Co
nver
ter
with
Sta
r Co
nfig
urat
ion
Clos
ed-L
oop
Curr
ent C
ontro
l of
Mul
tilev
el
Conv
erte
rs
Form
ed b
y Pa
ralle
l Co
mpl
emen
tary
Un
idire
ctio
nal
Phas
e-le
gs
Impl
emen
tatio
n of
a S
ingl
e Sp
ace
Vect
or
Cont
rol S
trate
gy
for a
Sev
en-
leve
l Inv
erte
r
Room
: 104
/106
S33:
PV
Gen
erat
ion
I
Cont
rol o
f PV
Gene
ratio
n Sy
stem
s us
ing
a Sy
nchr
onou
s Po
wer
Co
ntro
ller
Min
imum
DC
-link
Ca
paci
tanc
e Re
quire
men
t of
a T
wo-
stag
e Ph
otov
olta
ic
Inve
rter
Hot S
potti
ng
and
Seco
nd
Brea
kdow
n Ef
fect
s on
Re
vers
e I-V
Ch
arac
teris
tics
for M
ono-
crys
talli
ne S
i Ph
otov
olta
ics
PV G
roun
d-fa
ult D
etec
tion
Usin
g Sp
read
Sp
ectru
m
Tim
e Do
mai
n Re
flect
omet
ry
(SST
DR)
Room
: 107
/109
S34:
Mic
rogr
ids
Cost
-Prio
ritize
d Dr
oop
Sche
mes
fo
r Aut
onom
ous
Mic
rogr
ids
Impl
emen
ting
PCC
Volta
ge
Estim
atio
n Ut
ilisi
ng
Casc
aded
PI
Cont
rolle
rs in
th
e dq
Rot
atin
g Re
fere
nce
Fram
e fo
r Mic
rogr
id
Inve
rter C
ontro
l
Coor
dina
ted
Pow
er C
ontro
l St
rate
gy b
ased
on
Prim
ary-
frequ
ency
-si
gnal
ing
for I
slan
ded
Mic
rogr
ids
Virtu
al
Impe
danc
e Cu
rren
t Lim
iting
fo
r Inv
erte
rs in
M
icro
grid
s w
ith
Sync
hron
ous
Gene
rato
rs
Room
: 108
S35:
Con
vert
er
Mod
elin
g an
d Co
ntro
l III
Inef
fect
iven
ess
of O
rthog
onal
Ax
es C
ross
-co
uplin
g De
coup
ling
Tech
niqu
e in
Du
al S
eque
nce
Curr
ent C
ontro
l
Mod
elin
g an
d Co
ntro
ller
Desi
gn fo
r Se
ries-
conn
ecte
d Ou
tput
Un
iver
sal L
ink
Conv
erte
r
Mod
ulat
ed
Mod
el
Pred
ictiv
e Co
ntro
l (M
2PC)
Fo
r A 3
-pha
se
Activ
e Fr
ont-
end
Repe
titiv
e Sc
hem
e Pl
ugge
d-in
Pa
ralle
l with
De
adbe
at
Cont
rolle
r fo
r VFD
Fed
by
Cas
cade
d M
ultil
evel
In
verte
r
Room
: 110
/112
S36:
Pow
er
Conv
erte
rs fo
r Tr
ansp
orta
tion
App
licat
ions
I
Desi
gn o
f a
High
-effi
cien
cy
12V/
1kW
3-
phas
e BL
DC
Mot
or D
rive
Syst
em fo
r Di
esel
Eng
ine
Emis
sion
s Re
duct
ions
Desi
gn o
f A
2.5k
W 4
00V/
12V
High
-effi
cien
cy
DC-D
C Co
nver
ter
Usin
g A
Nov
el
Sync
hron
ous
Rect
ifica
tion
Cont
rol f
or
Elec
tric
Vehi
cles
Cent
raliz
ed
Cont
rol o
f Par
alle
l Co
nnec
ted
Pow
er
Cond
ition
ing
Syst
em fo
r Bat
tery
En
ergy
Sto
rage
Sy
stem
in C
harg
e-di
scha
rge-
stor
age
Pow
er S
tatio
n
High
-effi
cien
cy
Soft-
switc
hing
PW
M D
C-DC
Co
nver
ter
for E
lect
ric
Vehi
cle
Batte
ry
Char
gers
Room
: 111
/113
S37:
Pow
er
Conv
erte
rs
for U
tility
A
pplic
atio
ns I
Mul
ti-m
ode
Inte
rleav
ed
Boos
t Con
verte
r fo
r Pho
tovo
ltaic
Po
wer
Sy
stem
s w
ith
Low
-vol
tage
Ri
de-T
hrou
gh
Capa
bilit
y
Bidi
rect
iona
l Se
ries
AC-li
nk
Inve
rter
Mod
elin
g an
d An
alys
is o
f a
Mic
ro-in
verte
r Co
nfig
urat
ion
for H
igh
Pow
er
Phos
phor
ic
Acid
Fue
l Cel
l Ap
plic
atio
n
Smar
t Hig
h Vo
ltage
Circ
uit
Brea
ker i
n Ov
erhe
ad
Pow
er L
ines
fo
r Sm
art G
rid
Appl
icat
ions
Room
: 201
S38:
Fau
lt D
etec
tion
and
Faul
t Tol
eran
t D
rive
s
Grou
nd F
ault
Loca
tion
Iden
tific
atio
n fo
r Mul
tiple
Dr
ive
High
Re
sist
ance
Gr
ound
ing
Syst
ems
Post
-Fau
lt Op
erat
ion
of a
n As
ymm
etric
al
Six-
phas
e In
duct
ion
Mac
hine
with
Si
ngle
and
Tw
o Is
olat
ed N
eutra
l Po
ints
Faul
t Tol
eran
t AC
Mul
ti-dr
ive
Syst
em
Shor
t-circ
uit
Faul
t-tol
eran
t Co
ntro
l of
Bear
ingl
ess
Perm
anen
t M
agne
t Slic
e M
achi
ne
Room
: 203
S39:
Pre
dict
ive
Cont
rol o
f Dri
ves
Mul
tiste
p Di
rect
Mod
el
Pred
ictiv
e Co
ntro
l fo
r Pow
er
Elec
troni
cs
— P
art 1
: Al
gorit
hm
Mul
tiste
p Di
rect
Mod
el
Pred
ictiv
e Co
ntro
l fo
r Pow
er
Elec
troni
cs —
Pa
rt 2:
Ana
lysi
s
Pred
ictiv
e To
rque
Con
trol
for A
C Dr
ives
: Im
prov
emen
t of
Par
amet
ric
Robu
stne
ss
usin
g Tw
o-de
gree
-of-
freed
om C
ontro
l
Torq
ue R
ippl
e Re
duct
ion
of M
odel
Pr
edic
tive
Torq
ue C
ontro
l of
Indu
ctio
n M
otor
Driv
es
Room
: 205
S40:
Non
-co
nven
tiona
l El
ectr
ic
Mac
hine
s
Anal
ytic
al
Stiff
ness
Ca
lcul
atio
ns o
f a
Cone
-sha
ped
Mag
netic
Vi
brat
ion
Isol
ator
for a
M
icro
Bal
ance
Effic
ienc
y Im
prov
emen
t of
a H
igh
Dyna
mic
BLD
C Li
near
Mot
or
by M
ultip
hase
Co
ntro
l
Desi
gn o
f a
Nov
el
Hom
opol
ar
Bear
ingl
ess
Slic
e M
otor
w
ith R
eluc
tanc
e Ro
tor
Impr
ovem
ent o
f To
rque
Den
sity
of
Var
iabl
e Re
luct
ance
Ve
rnie
r M
achi
ne fo
r Hy
brid
Ele
ctric
Ve
hicl
e
Room
: 207
S41:
IPM
M
achi
nes
I
Brus
hles
s AC
In
terio
r-pe
rman
ent
Mag
net M
otor
De
sign
: A
Com
paris
on o
f Slo
t/Po
le C
ombi
natio
ns
and
Dist
ribut
ed
vs. C
once
ntra
ted
Win
ding
s
Redu
ctio
n of
Rot
or
Loss
es in
Mul
ti La
yer I
nter
ior
Perm
anen
t M
agne
t Sy
nchr
onou
s M
otor
s by
In
trodu
cing
Nov
el
Topo
logy
of R
otor
Fl
ux B
arrie
rs
Anal
ysis
of
Stat
or Ir
on
Loss
in In
terio
r PM
Mac
hine
s un
der O
pen
and
Shor
t-circ
uit
Cond
ition
s
Roto
r Sa
tura
tion
Impa
ct in
Sy
nchr
onou
s Re
luct
ance
and
PM
Ass
iste
d Re
luct
ance
M
otor
s
Tues
day,
Sep
tem
ber 1
7 (C
ontin
ued)
4:15
pm
– 4
:30
pm
PM B
reak
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
...Ex
hibi
t Hal
l A
5:00
pm
– 5
:30
pm
Inge
rsol
l Ran
d In
dust
rial
Sem
inar
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
.Exh
ibit
Hall
Stag
e
5:30
pm
– 6
:00
pm
Litte
lfuse
Indu
stri
al S
emin
ar ...
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
..Exh
ibit
Hall
Stag
e
To
wnh
all M
eetin
gs •
7:3
0 pm
– 9
:00
pm
8:00
am
– 8
:25
am
8:25
am
– 8
:50
am
8:50
am
– 9
:15
am
9:15
am
– 9
:40
am
Wed
nesd
ay, S
epte
mbe
r 18
7:00
am
– 7
:00
pm
Regi
stra
tion
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
...Lo
bby
A
O
ral S
essi
ons
• 8:
00 a
m –
9:4
0 am
2013 IEEE Energy Conversion Congress & Exposition® • 15Detailed Schedule
Room
: 210
/212
S53:
Wid
e B
andg
ap S
emi-
cond
ucto
rs II
Activ
e Cu
rren
t Ba
lanc
ing
for P
aral
lel-
conn
ecte
d Si
licon
Car
bide
M
OSFE
Ts
Max
imum
Sw
itchi
ng
Freq
uenc
y Ch
arac
teriz
atio
n of
4.5
kV-4
00A
SiC-
PiN
Dio
de
and
Si-IE
GT
Hybr
id P
air
Pow
er M
odul
e
Expe
rimen
tal
Eval
uatio
n of
10
kHz S
witc
hing
Op
erat
ion
of
4.5k
V-40
0A S
iC-
PiN
Dio
de a
nd
Si-IE
GT H
ybrid
Pa
ir M
odul
e
Expe
rimen
tal
Valid
atio
n of
New
ly
Fabr
icat
ed
Nor
mal
ly-o
n Ga
N H
igh-
elec
tron-
mob
ility
Tr
ansi
stor
Room
: 102
SS4:
Adv
ance
s in
W
irel
ess
Pow
er
for E
lect
ric
Vehi
cles
II
Key
Chal
leng
es
in E
V W
irele
ss
Char
ging
Germ
an
Activ
ities
on
Cont
actle
ss
Indu
ctiv
e Po
wer
Tra
nsfe
r
Char
acte
ristic
Co
mpa
rison
Be
twee
n H-
shap
ed
Core
and
Ci
rcul
ar C
ore
in W
irele
ss
Pow
er T
rans
fer
Syst
ems
for
Elec
tric
Vehi
cle
Wire
less
EV
Char
ging
, Op
timum
Op
erat
ing
Freq
uenc
y Se
lect
ion
for
Pow
er R
ange
3.
3 an
d 6.
6 kW
Room
: 103
/105
S43:
Mul
tilev
el
Conv
erte
r To
polo
gies
A M
ultil
evel
Co
nver
ter
Topo
logy
with
Co
mm
on F
lyin
g Ca
paci
tors
New
Fiv
e-le
vel
Activ
e N
eutra
l Po
int C
lam
ped
Conv
erte
r
Com
para
tive
Eval
uatio
n of
T-ty
pe
Topo
logi
es
Com
pris
ing
Stan
dard
an
d Re
vers
e-bl
ocki
ng IG
BTs
Perfo
rman
ce
Eval
uatio
n am
ong
Four
ty
pes
of F
ive-
leve
l Top
olog
ies
usin
g Pa
reto
Fr
ont C
urve
s
Room
: 104
/106
S44:
PV
Gen
erat
ion
II
Leak
age
Curr
ent
Supp
ress
ion
for
PV C
asca
ded
Mul
tilev
el
Inve
rter U
sing
Ga
N D
evic
es
Two-
switc
h Vo
ltage
Eq
ualiz
er U
sing
Se
ries-
reso
nant
In
verte
r an
d Vo
ltage
M
ultip
lier
for P
artia
lly-
shad
ed S
erie
s-co
nnec
ted
Phot
ovol
taic
M
odul
es
Impr
ovin
g Ou
tput
Cur
rent
Di
stor
tion
in H
ybrid
BC
M C
urre
nt
Cont
rolle
d 3-
phas
e M
icro
-in
verte
r
Enha
nced
Ex
perim
enta
l PV
Pla
nt G
rid-
inte
grat
ion
with
a
MW
Lith
ium
-io
n En
ergy
St
orag
e Sy
stem
Room
: 107
/109
S45:
Mic
rogr
ids
Syst
ems
Redu
cing
Fue
l Co
nsum
ptio
n in
a F
orw
ard
Oper
atin
g Ba
se
usin
g an
Ene
rgy
Man
agem
ent
Syst
em
An A
ccur
ate
Auto
nom
ous
Isla
ndin
g M
icro
grid
Re
activ
e Po
wer
, Im
bala
nce
Pow
er a
nd
Harm
onic
Po
wer
Sha
ring
Sche
me
Mic
rogr
id
Syst
em w
ith
Volta
ges
in
Quad
ratu
re
Desi
gn a
nd
Deve
lopm
ent
of a
Re
conf
igur
able
Hy
brid
M
icro
grid
Te
stbe
d
Room
: 108
S46:
Con
vert
er
Mod
elin
g an
d Co
ntro
l IV
Phas
e-or
ient
ed
Cont
rol o
f a
Mod
ular
3-p
hase
3-
leve
l 4-le
g In
verte
r AC
Pow
er S
ourc
e Su
pply
ing
Floa
ting
or
Grou
nded
Loa
ds
Unco
uple
d Di
rect
Pow
er
Cont
rol B
ased
on
Impr
oved
Se
ctor
Se
lect
ion
Algo
rithm
for
Thre
e-le
vel
PWM
Rec
tifie
r
Obse
rver
-bas
ed
Stat
e-sp
ace
Curr
ent C
ontro
l fo
r a 3
-pha
se
Grid
-con
nect
ed
Conv
erte
r Eq
uipp
ed W
ith
an L
CL F
ilter
Com
man
d Ge
nera
tion
for
Wid
e Ra
nge
Oper
atio
n of
Hy
ster
esis
Co
ntro
lled
Vien
na
Rect
ifier
s
Room
: 110
/112
S47:
Pow
er
Conv
erte
rs fo
r Tr
ansp
orta
tion
App
licat
ions
II
Prop
ulsi
on
Syst
em
Arch
itect
ure
and
Pow
er
Cond
ition
ing
Topo
logi
es
for F
uel C
ell
Vehi
cles
Soft
Switc
hing
, Fr
eque
ncy
Cont
rol,
and
Bidi
rect
iona
l Po
wer
Flo
w
of a
n Is
olat
ed
Quas
i-sw
itche
d-ca
paci
tor D
C-DC
Co
nver
ter f
or
Auto
mot
ive
Appl
icat
ions
Perfo
rman
ce
Anal
ysis
of
Bidi
rect
iona
l DC
-DC
Conv
erte
rs
for E
lect
ric
Vehi
cles
and
Ch
argi
ng
Infra
stru
ctur
e
Seco
nd
Harm
onic
Cu
rren
t Re
duct
ion
by u
sing
a
Reso
nant
Ci
rcui
t in
a Si
ngle
-pha
se
Batte
ry C
harg
er
Room
: 111
/113
S48:
Pow
er
Conv
erte
rs
for U
tility
A
pplic
atio
ns II
A Po
wer
Ef
ficie
ncy
Impr
ovem
ent
Tech
niqu
e fo
r A
Bidi
rect
iona
l Du
al A
ctiv
e Br
idge
DC-
DC
Conv
erte
r at
Ligh
t Loa
d
Cons
ider
atio
ns
for t
he D
esig
n of
Pow
er
Elec
troni
c M
odul
es
for H
ybrid
Di
strib
utio
n Tr
ansf
orm
ers
Activ
e Vo
ltage
Co
ntro
l of
SiC-
SIT
Circ
uit
Brea
kers
for
Over
volta
ge
Supp
ress
ion
Stab
le
Oper
atio
n of
M
ultip
le P
ower
Ro
uter
s
Room
: 201
S49:
Cur
rent
Re
gula
tion
in
Dri
ves
Curr
ent C
ontro
l M
etho
d w
ith
Cont
rol I
nput
s in
Pol
ar
Coor
dina
tes
for
SPM
SM B
ased
on
Lin
eariz
ed
Mod
el
Optim
ized
Harm
onic
Cu
rren
t Con
trol
Stra
tegy
for
Non
linea
ritie
s Co
mpe
nsat
ion
in M
ultip
hase
AC
Driv
es
New
Mod
el
Base
d Pr
edic
tive
Curr
ent C
ontro
l St
rate
gy fo
r Do
ubly
Sal
ient
Pe
rman
ent
Mag
net
Sync
hron
ous
Mac
hine
s
A Si
mpl
e Tu
ning
M
etho
d Ai
med
at
Opt
imal
Se
ttlin
g Ti
me
and
Over
shoo
t for
Sy
nchr
onou
s PI
Cu
rren
t Con
trol
in E
lect
ric
Mac
hine
s
Room
: 203
S50:
Hig
h Po
wer
D
rive
s an
d M
ultil
evel
Pow
er
Conv
erte
rs
A Sp
eed-
Sens
orle
ss
Star
tup
Met
hod
of a
n In
duct
ion
Mot
or D
riven
by
a M
odul
ar
Mul
tilev
el
Casc
ade
Inve
rter
(MM
CI-D
SCC)
Cont
rol S
trate
gy
for I
mpr
oved
Dy
nam
ic
Perfo
rman
ce o
f Va
riabl
e-sp
eed
Driv
es w
ith
the
Mod
ular
M
ultil
evel
Co
nver
ter
Dam
ping
Co
ncep
ts o
f LC
L Fi
lter f
or
a M
ulti-
leve
l M
ediu
m V
olta
ge
Adju
stab
le
Spee
d Dr
ive
with
Low
Pul
se
Ratio
Inve
stig
atio
n of
Har
mon
ics
Inte
ract
ion
in
High
-pow
er
PWM
Cur
rent
-so
urce
Mot
or
Driv
es
Room
: 205
S51:
The
rmal
A
naly
sis
of E
lect
ric
Mac
hine
s
Ther
mal
M
odel
ling
of a
Fr
actio
nal-s
lot
Conc
entra
ted-
win
ding
Kam
an
Type
Axi
al-fl
ux
Perm
anen
t-m
agne
t M
achi
ne
On th
e Im
prov
emen
t of
the
Ther
mal
Be
havi
or o
f El
ectri
c M
otor
s
Conj
ugat
e He
at T
rans
fer
Anal
ysis
of
Inte
grat
ed
Brus
hles
s Ge
nera
tors
for
Mor
e El
ectri
c En
gine
s
Dete
rmin
atio
n of
Rot
or-s
tato
r He
at E
xcha
nge
Coef
ficie
nts
in th
e Ca
se o
f To
tally
Enc
lose
d M
achi
nes:
Ap
plic
atio
n to
an
Inte
grat
ed
Star
ter-
Gene
rato
r
Room
: 207
S52:
PM
M
achi
nes
High
Pow
er
Fact
or V
erni
er
Perm
anen
t M
agne
t M
achi
nes
A Tw
o-Ax
is
Activ
ely
Regu
late
d Co
nseq
uent
-Po
le
Bear
ingl
ess
Mot
or w
ith
Wid
e M
agne
tic
Gaps
Desi
gn
Met
hodo
logy
for
Varia
ble-
flux,
Fl
ux-in
tens
ifyin
g In
terio
r Pe
rman
ent
Mag
net
Mac
hine
s fo
r an
Elec
tric
Vehi
cle
Clas
s In
verte
r Ra
ting
Cogg
ing
Torq
ue
Redu
ctio
n in
Fl
ux S
witc
hing
Pe
rman
ent
Mag
net
Mac
hine
s by
Ro
tor P
ole
Shap
ing
10:0
0 am
– 1
0:25
am
10:2
5 am
– 1
0:50
am
10:5
0 am
– 1
1:15
am
11:1
5 am
– 1
1:40
am
Wed
nesd
ay, S
epte
mbe
r 18
(Con
tinue
d)9:
40 a
m –
10:
00 a
m
AM
Bre
ak ...
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
....L
obby
A
O
ral S
essi
ons
• 10
:00
am –
11:
40 a
m
11:4
0 am
– 1
:30
pm
Lunc
h on
Ow
n
16 • 2013 IEEE Energy Conversion Congress & Exposition® Detailed Schedule
Room
: 210
/212
S64:
Pas
sive
Co
mpo
nent
s
Relia
bilit
y of
Ca
paci
tors
fo
r DC-
link
Appl
icat
ions
—
An O
verv
iew
Plan
ar
Inte
grat
ed
Mul
tilay
er
Capa
citiv
e Su
bstra
te
for D
C-DC
Co
nver
ter
Appl
icat
ions
Com
preh
ensi
ve
Desi
gn o
f DC
Bus
bars
fo
r Med
ium
Vo
ltage
Ap
plic
atio
ns
A Fr
eque
ncy-
dom
ain
Stud
y on
the
Effe
ct
of D
C-lin
k De
coup
ling
Capa
cito
rs
Room
: 102
S54:
Cha
rgin
g Sy
stem
s
An In
tegr
ated
On
boar
d Ch
arge
r and
Ac
cess
ory
Pow
er
Conv
erte
r for
Pl
ug-in
Ele
ctric
Ve
hicl
es
A Ut
ility
In
terfa
ced
Half-
brid
ge B
ased
Ca
paci
tivel
y Co
uple
d Po
wer
Tr
ansf
er C
ircui
t w
ith A
utom
atic
Fr
eque
ncy
Cont
rol
A Se
al L
ead-
acid
Bat
tery
Ch
arge
r For
Pr
olon
ging
Ba
ttery
Li
fetim
e Us
ing
Supe
rimpo
sed
Puls
e Fr
eque
ncy
Tech
niqu
e
Desi
gn a
nd
Impl
emen
tatio
n of
a 7
5 KW
M
obile
Ch
argi
ng
Syst
em fo
r El
ectri
c Ve
hicl
es
Room
: 103
/105
SS5:
Rec
ent
Adv
ance
s in
Sw
itche
d Ca
paci
tor
Circ
uits
I
Switc
hed-
capa
cito
r/M
ultil
evel
DC-
DC C
onve
rters
—
Adv
ance
and
Ap
plic
atio
ns
Calc
ulat
ion
Prog
ram
Su
ppor
ting
Switc
hed
Capa
cito
r DC
-DC
Char
ge
Pum
p De
sign
Soft
Char
ging
Op
erat
ion
of S
witc
hed
Capa
cito
r Co
nver
ters
—
Incr
easi
ng
Pow
er D
ensi
ty
and
Effic
ienc
y
Perfo
rman
ce
Mod
elin
g of
Sw
itche
d-ca
paci
tor
Conv
erte
rs
Room
: 104
/106
S55:
PV
Gen
erat
ion
III
Sim
ulat
ion
Plat
form
for
Dyna
mic
Ph
otov
olta
ic
Arra
ys
An O
ptim
ized
Com
mon
M
ode
Volta
ge
Redu
ctio
n PW
M S
trate
gy
for T
-type
3-
phas
e Th
ree
Leve
l Ph
otov
olta
ic
Grid
-tied
In
verte
r
Grap
h-ba
sed
Sem
i-su
perv
ised
Le
arni
ng
for F
ault
Dete
ctio
n an
d Cl
assi
ficat
ion
in S
olar
Ph
otov
olta
ic
Arra
ys
A N
ovel
Sec
ond
Harm
onic
Cu
rren
t Re
duct
ion
Met
hod
for
Dual
Act
ive
Brid
ge U
sed
in
Phot
ovol
taic
Po
wer
Sys
tem
Room
: 107
/109
S56:
Mic
rogr
id
Cont
rol
Mod
elin
g an
d Co
ntro
l of a
N
atur
al G
as
Gene
rato
r Set
in
the
CERT
S M
icro
grid
Impr
ovin
g M
icro
grid
Pe
rform
ance
by
Coo
pera
tive
Cont
rol o
f Di
strib
uted
En
ergy
Sou
rces
A N
onlin
ear
Dist
urba
nce
Obse
rver
Bas
ed
DC B
us V
olta
ge
Cont
rol f
or a
Hy
brid
AC/
DC
Mic
rogr
id
Cons
truct
ion
of N
onlin
ear
Droo
p Re
latio
ns
to O
ptim
ize
Isla
nded
M
icro
grid
s Op
erat
ion
Room
: 108
S57:
Con
vert
ers
EMI
Impa
ct o
f In
terle
avin
g on
Com
mon
M
ode
EMI
Filte
r Wei
ght
Redu
ctio
n of
Par
alle
led
3-ph
ase
Volta
ge-s
ourc
e Co
nver
ters
Char
acte
risin
g an
d M
odel
ling
Exte
nded
Co
nduc
ted
Elec
tro-
mag
netic
In
terfe
renc
e In
Den
sely
Pa
cked
DC-
DC
Conv
erte
rs
Shap
ing
Puls
e Tr
ansi
tions
by
Activ
e Vo
ltage
Co
ntro
l for
e Re
duce
d EM
I Ge
nera
tion
The
Inpu
t Im
peda
nce
of
Com
mon
Mod
e an
d Di
ffere
ntia
l M
ode
Noi
se
Sepa
rato
rs
Room
: 110
/112
S58:
Pow
er
Conv
erte
rs fo
r Re
new
able
En
ergy
A
pplic
atio
ns I
High
Pow
er
Solid
-sta
te
Step
-up
Reso
nant
Mar
x M
odul
ator
with
Co
ntin
uous
Ou
tput
Cur
rent
fo
r Offs
hore
W
ind
Ener
gy
Syst
ems
Mul
ti-re
sona
nt
base
d Sl
idin
g M
ode
Cont
rol o
f Gr
id-c
onne
cted
Co
nver
ter u
nder
Di
stor
ted
Grid
Co
nditi
ons
Open
-sw
itch
Faul
t Det
ectio
n M
etho
d of
an
NPC
Co
nver
ter f
or
Win
d Tu
rbin
e Sy
stem
s
An In
rush
Cu
rren
t M
itiga
tion
Met
hod
for t
he
Grid
-con
nect
ed
Conv
erte
rs in
th
e Lo
w-v
olta
ge
Ride
-thro
ugh
Oper
atio
n
Room
: 111
/113
S59:
Mul
tilev
el
Conv
erte
rs I
Pow
er L
oss
and
Ther
mal
Ch
arac
teris
atio
n of
IGBT
Mod
ules
in
the
Alte
rnat
e Ar
m C
onve
rter
Faul
t Tol
eran
t Co
st-e
ffect
ive
Carr
ierle
ss
Stoc
hast
ic
Synt
hesi
s of
Vol
tage
s an
d Cu
rren
ts
in M
ulti-
cell
Mul
tilev
el
Conv
erte
rs v
ia
the
Cent
ral
Lim
it Th
eore
m
A Co
mpo
nent
-m
inim
ized
Dual
-out
put
Mul
tilev
el
Conv
erte
r and
its
App
licat
ions
Enha
nced
FP
GA B
ased
Th
ree-
leve
l Sp
ace
Vect
or
Puls
e W
idth
M
odul
atio
n w
ith A
ctiv
e N
eutra
l Poi
nt
Bala
ncin
g
Room
: 201
S60:
Har
dwar
e-in
-the
-loo
p,
Sim
ulat
ion,
and
H
ardw
are
Issu
es
High
-fide
lity
Real
-tim
e Ha
rdw
are-
in-th
e-lo
op
Emul
atio
n of
PM
SM In
verte
r Dr
ives
FPGA
Bas
ed
Deta
iled
Real
-tim
e Si
mul
atio
n of
Pow
er
Elec
troni
c Co
nver
ters
an
d El
ectri
c M
achi
nes
for E
V HI
L Ap
plic
atio
ns
Hard
war
e-in
-the-
loop
Si
mul
atio
n Ve
rific
atio
n of
a S
moo
th
Tran
sitio
n Al
gorit
hm
Betw
een
Max
imum
Tor
que
per A
mpe
re
Cont
rol a
nd
Sing
le C
urre
nt
Regu
lato
r
Anal
ysis
of
Cur
rent
Sa
mpl
ing
Erro
rs
in P
WM
, VSI
Dr
ives
Room
: 203
S61:
Dir
ect
Torq
ue C
ontr
ol
Dead
beat
, Di
rect
Tor
que
and
Flux
Con
trol
of IP
MSM
Dr
ives
usi
ng a
M
inim
um T
ime
Ram
p Tr
ajec
tory
M
etho
d at
Vo
ltage
and
Cu
rren
t Lim
its
Dead
beat
-di
rect
Tor
que
and
Flux
Co
ntro
l on
Low
Sw
itchi
ng
Freq
uenc
y In
duct
ion
Mac
hine
Driv
es
Usin
g th
e En
hanc
ed F
lux
Obse
rver
and
To
rque
Mod
el
Disc
rete
-tim
e Ph
ysic
al
Lim
its-b
ased
En
hanc
ed
Fini
te-s
ettli
ng-
step
Dire
ct
Torq
ue a
nd
Flux
Con
trol f
or
IPM
SM D
rives
Squa
re-w
ave
Oper
atio
n of
Di
rect
Tor
que
Cont
rolle
d PM
SM D
rive
Syst
em
Room
: 205
S62:
DC-
DC
Non
-is
olat
ed II
I
Perfo
rman
ce
Anal
ysis
of
Gene
raliz
ed
Alge
brai
c Sw
itche
d Ca
paci
tor
Conv
erte
rs
27.1
2 M
Hz
Larg
e Vo
ltage
Ga
in R
eson
ant
Conv
erte
r with
Lo
w V
olta
ge
Stre
ss
Miti
gatio
n an
d Ut
iliza
tion
of
the
Indu
ctor
Co
uplin
g Ef
fect
in
Inte
rleav
ed
Mul
tipha
se D
C-DC
Con
verte
rs
A N
ovel
Sw
itche
d-co
uple
d-in
duct
or
DC-D
C St
ep-u
p Co
nver
ter
Room
: 207
S63:
Sy
nchr
onou
s Re
luct
ance
M
achi
nes
Win
ding
Co
nfig
urat
ions
an
d Pe
rform
ance
In
vest
igat
ions
of
12-
stat
or
Pole
Var
iabl
e Fl
ux R
eluc
tanc
e M
achi
nes
Sens
itivi
ty
Anal
ysis
of
Torq
ue R
ippl
e Re
duct
ion
of
Sync
hron
ous
Relu
ctan
ce
and
Inte
rior P
M
Mot
ors
BLDC
M
ultip
hase
Re
luct
ance
M
achi
nes:
A
Revi
val A
ttem
pt
with
2D
FEM
In
vest
igat
ion
and
Stan
dstil
l Te
sts
Desi
gn o
f Sy
nchr
onou
s Re
luct
ance
M
achi
nes
with
M
ulti-
obje
ctiv
e Op
timiza
tion
Algo
rithm
s
3:10
pm
– 3
:30
pm
PM B
reak
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
.Lob
by A
1:30
pm
– 1
:55
pm
1:55
pm
– 2
:20
pm
2:20
pm
– 2
:45
pm
2:45
pm
– 3
:10
pm
Wed
nesd
ay, S
epte
mbe
r 18
(Con
tinue
d)
Ora
l Ses
sion
s •
1:30
pm
– 3
:10
pm
2013 IEEE Energy Conversion Congress & Exposition® • 17Detailed Schedule
Room
: 102
S65:
Spe
cial
Po
wer
Co
nver
ters
in
Tran
spor
tatio
n
Nov
el
Bidi
rect
iona
l Sn
ubbe
rless
So
ft-sw
itchi
ng
Nat
ural
ly C
lam
ped
Zero
Cur
rent
Co
mm
utat
ed
Curr
ent-f
ed
Dual
Act
ive
Brid
ge (C
FDAB
) Co
nver
ter f
or F
uel
Cell
Vehi
cles
Wire
less
Pow
er
Tran
sfer
Usi
ng
Clas
s E
Inve
rter
with
Sat
urab
le
DC F
eed
Indu
ctor
A N
ovel
Slo
w-
switc
hing
Co
ntro
l for
M
ultip
le P
icku
p IP
T Sy
stem
s
Effic
ient
, MHz
Fr
eque
ncy,
Re
sona
nt
Conv
erte
r for
Su
b-m
eter
(3
0cm
) Dis
tanc
e W
irele
ss P
ower
Tr
ansf
er
Room
: 103
/105
SS6:
Rec
ent
Adv
ance
s in
Sw
itche
d Ca
paci
tor
Circ
uits
II
Mod
ulat
ion
and
Reco
nfig
urat
ion
Tech
niqu
es
for M
odul
ar
Capa
cito
r-cl
ampe
d Co
nver
ters
Supp
ress
ion
of S
purio
us
Trig
gerin
g in
Sy
nchr
onou
s Bu
ck C
onve
rter
With
Sw
itche
d-ca
paci
tor G
ate
Switc
hed
Capa
cito
r En
ergy
Buf
fers
Nex
t Ge
nera
tion
Switc
hed-
capa
cito
r Ci
rcui
ts b
ased
on
Wid
e Ba
ndga
p De
vice
s
Room
: 104
/106
S66:
PV
Conv
erte
rs
A Si
ngle
-sta
ge
Mul
ti-st
ring
Quas
i-res
onan
t In
verte
r for
Gr
id-ti
ed
Phot
ovol
taic
Sy
stem
s
Cent
ral
Mul
tilev
el
Curr
ent-f
ed
Inve
rter
with
Mod
ule
Inte
grat
ed D
C-DC
Con
verte
rs
for G
rid-
conn
ecte
d PV
Pl
ant
Mod
ular
M
ultil
evel
Co
nver
ter f
or
Larg
e-sc
ale
Mul
tistri
ng
Phot
ovol
taic
En
ergy
Co
nver
sion
Sy
stem
Desi
gn o
f M
odul
e-in
tegr
ated
Co
nver
ters
for
Phot
ovol
taic
St
rings
Room
: 107
/109
S67:
Con
trol
U
nder
U
nbal
ance
d G
rid
Cond
ition
s
Faul
t Rid
e Th
roug
h Co
ntro
l of
Med
ium
-vo
ltage
Co
nver
ters
w
ith L
CL F
ilter
in
Dis
tribu
ted
Gene
ratio
n Sy
stem
s
Cont
rol o
f Ac
tive
Mob
ile
Subs
tatio
ns
unde
r Sys
tem
Fa
ults
Osci
llato
ry
Angl
e Co
ntro
l Sc
hem
e fo
r PW
M S
tatic
Sy
nchr
onou
s Co
mpe
nsat
ors
unde
r Un
bala
nced
Co
nditi
ons
and
Syst
em F
aults
Smar
t Im
peda
nce
Appl
icat
ion
on
Unba
lanc
ed
Harm
onic
M
itiga
tion
in
3-ph
ase
Four
-w
ire S
yste
ms
Room
: 108
S68:
AC-
DC
Mul
ti-ph
ase
I
Curr
ent S
ourc
e Re
ctifi
ers
in
Disc
ontin
uous
Co
nduc
tion
Mod
es o
f Op
erat
ion
Redu
ced
Switc
h M
ulti-
leve
l Un
idire
ctio
nal
Rect
ifier
s
Anal
ysis
an
d De
sign
of
3-p
hase
Bu
ck-b
oost
Qu
asi-r
eson
ant
Redu
ced
Switc
h Re
ctifi
er
Volu
me
Min
imiza
tion
of
the
Mai
n DM
/CM
EM
I Filt
er S
tage
of
a B
idire
ctio
nal
3-ph
ase
Thre
e-le
vel P
WM
Re
ctifi
er S
yste
m
Room
: 110
/112
S69:
Pow
er
Conv
erte
rs fo
r Re
new
able
En
ergy
A
pplic
atio
ns II
A Du
al-in
put
Boos
t-buc
k Co
nver
ter
with
Cou
pled
In
duct
ors
for T
EG
Appl
icat
ions
A Si
mpl
e Fl
ybac
k M
icro
inve
rter
for S
olar
En
ergy
Sys
tem
s w
ith V
aria
ble
Freq
uenc
y Co
ntro
lled
ZVS
An O
n-ch
ip
Hyst
eret
ic-
curr
ent-c
ontro
lled
LED
Driv
er w
ith
Sync
hron
ous
Rect
ifica
tion
and
Loss
less
Pea
k an
d Va
lley
Curr
ent
Sens
ing
for
High
-brig
htne
ss
Ligh
ting
Appl
icat
ions
Bidi
rect
iona
l M
odul
ar
Mul
tilev
el D
C-DC
Co
nver
ter C
ontro
l an
d Ef
ficie
ncy
Impr
ovem
ents
th
roug
h Se
para
te
Mod
ule
Cont
rol
Met
hod
Room
: 111
/113
S70:
Res
onan
t D
C-D
C
Loss
Red
uctio
n in
a M
ediu
m
Freq
uenc
y Se
ries
Reso
nanc
e Co
nver
ter
by F
orce
d Ev
acua
tion
VHF
Serie
s-in
put P
aral
lel-
outp
ut
Inte
rleav
ed
Self-
osci
llatin
g Re
sona
nt S
EPIC
Co
nver
ter
New
Opt
imal
De
sign
M
etho
dolo
gy
of M
ediu
m-
frequ
ency
So
ft-sw
itchi
ng
Conv
erte
rs
A Lo
ad/L
ine
Adap
tive
Zero
Vol
tage
Sw
itchi
ng D
C-DC
Con
verte
r us
ed in
Ele
ctric
Ve
hicl
es
Room
: 201
S71:
Con
trol
Is
sues
in
Elec
tric
Dri
ves
Unifi
ed D
irect
-flu
x Ve
ctor
Co
ntro
l of
Indu
ctio
n M
otor
Sel
f-co
mm
issi
onin
g Dr
ive
with
An
alys
is o
f Pa
ram
eter
De
tuni
ng
Effe
cts
Sing
le E
xter
nal
Sour
ce C
ontro
l of
Dou
bly-
fed
Indu
ctio
n M
achi
ne U
sing
Du
al In
verte
r
Pred
ictiv
e Di
rect
Flu
x Ve
ctor
Con
trol
of P
erm
anen
t M
agne
t Sy
nchr
onou
s M
otor
Driv
es
Fluc
tuat
ing
Curr
ent C
ontro
l fo
r a P
MSM
un
der R
educ
ed
DC L
ink
Capa
cita
nce
Room
: 203
S72:
Ass
orte
d Is
sues
in
Elec
tric
Dri
ves
Stab
ility
An
alys
is a
nd
Impr
ovem
ents
fo
r Com
bine
d Vo
ltage
and
Cu
rren
t Mod
e Fl
ux O
bser
ver
of In
duct
ion
Mac
hine
Mod
elin
g of
Pe
rman
ent
Mag
net
Sync
hron
ous
Mac
hine
In
clud
ing
Torq
ue R
ippl
e Ef
fect
s
A DC
-flux
-in
ject
ion
Appr
oach
fo
r The
rmal
M
onito
ring
of In
duct
ion
Mac
hine
s w
ith
Dire
ct T
orqu
e Co
ntro
l
Faul
t Tol
eran
t Ro
tor P
ositi
on
and
Velo
city
Es
timat
ion
Usin
g Bi
nary
Ha
ll-ef
fect
Se
nsor
s fo
r Low
Co
st V
ecto
r Co
ntro
l Driv
es
Room
: 205
S73:
Mod
elin
g an
d Co
ntro
l V
Eval
uatio
n of
Al
tern
ativ
e M
odul
atio
n Sc
hem
es fo
r Th
ree-
leve
l N
eutra
l-poi
nt-
clam
ped
3-ph
ase
Inve
rters
Com
pone
nt
Cost
Mod
els
for
Mul
ti-ob
ject
ive
Optim
izatio
ns
of S
witc
hed-
mod
e Po
wer
Co
nver
ters
A Co
mpa
rison
be
twee
n De
ad-b
eat
and
Pred
ictiv
e Co
ntro
l for
a
7-le
vel B
ack-
to-
back
Cas
cade
d H-
brid
ge u
nder
Fa
ult C
ondi
tions
An In
nova
tive
Curr
ent S
enso
r-le
ss C
ontin
uous
Co
nduc
tion
Mod
e PF
C Co
ntro
l
Room
: 207
S74:
Mag
netic
G
ears
Slip
Rec
over
y an
d Pr
even
tion
in P
seud
o Di
rect
Driv
e Pe
rman
ent
Mag
net
Mac
hine
s
Mot
or
Inte
grat
ed
Perm
anen
t M
agne
t Gea
r in
a B
atte
ry
Elec
trica
l Ve
hicl
e
Cons
truct
ion
of
a Lo
w S
peed
Fl
ux F
ocus
ing
Mag
netic
Gea
r
Theo
retic
al a
nd
Expe
rimen
tal
Loss
and
Ef
ficie
ncy
Stud
ies
of a
M
agne
tic L
ead
Scre
w
7:00
pm
– 9
:00
pm
ECCE
Ban
quet
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
....M
ile H
igh
Ballr
oom
3:30
pm
– 3
:55
pm
3:55
pm
– 4
:20
pm
4:20
pm
– 4
:45
pm
4:45
pm
– 5
:10
pm
Room
: 210
/212
S75:
The
rmal
M
anag
emen
t
Wei
ght
Optim
izatio
n of
a C
oolin
g Sy
stem
Co
mpo
sed
of F
an a
nd
Extru
ded
Fin
Heat
Sin
k
Ther
moe
lect
ric
Cool
ing
for P
ower
El
ectro
nics
Ci
rcui
ts: S
mal
l Si
gnal
Mod
elin
g an
d Co
ntro
ller
Desi
gn
A Re
al-ti
me
Ther
mal
Mod
el
for M
onito
ring
of P
ower
Se
mic
ondu
ctor
De
vice
s
A Co
mpa
rison
of
The
rmal
Via
s Pa
ttern
s us
ed
for T
herm
al
Man
agem
ent
in P
ower
Co
nver
ter
Wed
nesd
ay, S
epte
mbe
r 18
(Con
tinue
d)
Ora
l Ses
sion
s •
3:30
pm
– 5
:10
pm
An O
n-ch
ipHy
ster
etic
-cu
rren
t-con
trolle
dLE
D Dr
iver
with
Sync
hron
ous
Rect
ifica
tion
and
Loss
less
Pea
kan
d Va
lley
Curr
ent
Sens
ing
for
High
-brig
htne
ss
Ligh
ting
Appl
icat
ions
WITHDRAW
N
18 • 2013 IEEE Energy Conversion Congress & Exposition® Detailed Schedule
Room
: 210
/212
S87:
Con
vert
er-
leve
l Pow
er
Elec
tron
ic
Dev
ice
Inte
grat
ion
Eval
uatio
n of
15
kV S
iC N
-IGBT
an
d P-
IGBT
for
Com
plem
enta
ry
Inve
rter
Topo
logy
with
Ze
ro d
v/dt
St
ress
on
Gate
Dr
iver
s
Char
acte
rizat
ion
of 1
5 kV
SiC
n-
IGBT
and
its
App
licat
ion
Cons
ider
atio
ns
for H
igh
Pow
er
Conv
erte
rs
A Ga
te A
ssis
t Ci
rcui
t for
Cro
ss
Talk
Sup
pres
ion
of S
iC D
evic
es
in a
Pha
se-le
g Co
nfig
urat
ion
Valid
atio
n of
the
Plug
-and
-pla
y AC
/AC
Pow
er
Elec
troni
cs
Build
ing
Bloc
k (A
C-PE
BB)
for M
ediu
m
Volta
ge
Grid
Con
trol
Appl
icat
ions
Room
: 102
S76:
Wir
eles
s Po
wer
Tran
sfer
I
Desi
gn a
nd
Impl
emen
tatio
n of
Rem
ovab
le
and
Clos
ed-
shap
e Du
al
Ring
Pic
kup
for
Cont
actle
ss
Line
ar In
duct
ive
Pow
er T
rack
Sy
stem
Freq
uenc
y Sp
littin
g An
alys
is o
f M
agne
tical
ly-
coup
led
Reso
nant
W
irele
ss P
ower
Tr
ansf
er
8-ty
pe
Cont
actle
ss
Tran
sfor
mer
Ap
plie
d in
Ra
ilway
In
duct
ive
Pow
er T
rans
fer
Syst
em
Impe
danc
e Tr
ansf
orm
ers
for C
ompa
ct
and
Robu
st
Coup
led
Mag
netic
Re
sona
nce
Syst
ems
Room
: 103
/105
S77:
Pow
er
Qua
lity
Appl
icat
ion
of
Mat
rix P
enci
l M
etho
d in
Su
b-cy
cle
Volta
ge D
ip
Clas
sific
atio
n
Elec
tric
Arc
Furn
ace
(EAF
) Co
mpe
nsat
ion
usin
g La
Gran
ge
Min
imiza
tion
Impr
ovem
ent o
f Co
nser
vatio
n Vo
ltage
Re
duct
ion
Ener
gy
Savi
ngs
via
Loca
l Vol
tage
Re
gula
tion
Adap
tive
Not
ch
Filte
r App
lied
to H
ybrid
Ac
tive
Var
Com
pens
ator
un
der
Non
sinu
soid
al
and
Unba
lanc
ed
Cond
ition
s
Room
: 104
/106
S78:
Win
d En
ergy
: DFI
G
Cont
rol a
nd
Ope
ratio
n
Harm
onic
An
alys
is o
f Do
ubly
Fed
In
duct
ion
Gene
rato
r Ba
sed
Utili
ty
Inte
ract
ive
Win
d Tu
rbin
e Sy
stem
s Du
ring
Faul
t Con
ditio
ns
Rese
arch
on
LVRT
Cap
abili
ty
of D
FIG
with
De
mag
netiz
atio
n Co
ntro
l
Enha
nced
Op
erat
ion
for
DFIG
-bas
ed
WEC
S us
ing
Reso
nant
Fe
edba
ck
Com
pens
ator
s un
der G
rid
Unba
lanc
e
A Cl
ass
of F
lux
Obse
rver
s fo
r Do
ubly
-fed
Indu
ctio
n Ge
nera
tors
us
ed in
Sm
all
Pow
er W
ind
Gene
ratio
n Sy
stem
s
Room
: 107
/109
S79:
Dis
trib
uted
G
ener
atio
n I
Coor
dina
ted
Oper
atio
n of
Par
alle
l-co
nnec
ted
Inve
rters
for
Activ
e Is
land
ing
Dete
ctio
n Us
ing
High
Fre
quen
cy
Sign
al In
ject
ion
Impl
emen
tatio
n an
d Co
ntro
l of
a Re
side
ntia
l M
icro
grid
Bas
ed
on R
enew
able
En
ergy
Sou
rces
, Hy
brid
Sto
rage
Sy
stem
s an
d Th
erm
al
Cont
rolla
ble
Load
s
Enha
nced
Po
wer
Qua
lity
Cont
rol S
trate
gy
for P
aral
lele
d In
verte
rs in
Di
strib
uted
Ge
nera
tion
An E
ffect
ive
Smoo
th
Tran
sitio
n Co
ntro
l St
rate
gy u
sing
Dr
oop
Base
d Sy
nchr
oniza
tion
for P
aral
lel
Inve
rters
Room
: 108
S80:
DC-
DC
Isol
ated
II
Rapi
d Pu
sh
Pull
Reso
nant
Ch
arge
r for
Hi
gh P
ower
Hi
gh V
olta
ge
Appl
icat
ion
Usin
g Lo
w In
put
Volta
ge
Expe
rimen
tal
Disc
ussi
ons
on O
pera
ting
Freq
uenc
ies
of
a Bi
dire
ctio
nal
Isol
ated
DC-
DC
Conv
erte
r for
a
Batte
ry E
nerg
y St
orag
e Sy
stem
A M
odul
ar D
C-DC
Con
verte
r w
ith C
olla
psib
le
Inpu
t Vol
tage
of
Ser
ies
Conn
ecte
d M
odul
es
with
out
Addi
tiona
l By
pass
Sw
itch
A LC
L-re
sona
nt
Isol
ated
M
ultip
ort D
C-DC
Con
verte
r fo
r Pow
er
Man
agem
ent
of M
ultip
le
Rene
wab
le
Ener
gy S
ourc
es
Room
: 110
/112
S81:
AC-
AC
Conv
erte
rs
A N
ovel
Si
ngle
-pha
se
PWM
AC-
AC
Conv
erte
rs
With
out
Com
mut
atio
n Pr
oble
m
Desi
gn o
f 400
V Cl
ass
Inve
rter
Driv
e Us
ing
SiC
6-in
-1 P
ower
M
odul
e
A 3-
phas
e Ba
ck-to
-bac
k Co
nver
ter f
or
Reac
tive
Pow
er
Com
pens
atio
n,
Curr
ent
Harm
onic
Fi
lterin
g an
d Ac
tive
Pow
er
Com
pens
atio
n
In-s
itu
Reco
nfig
urat
ion
for F
lexi
ble
Dist
ribut
ion
of E
nerg
y an
d St
orag
e Re
sour
ces
Room
: 111
/113
S82:
Pow
er
Conv
erte
rs fo
r Ph
otov
olta
ics
A Si
ngle
-pha
se
Grid
-con
nect
ed
PV C
onve
rter
with
Min
imal
DC
-link
Ca
paci
tor a
nd
Low
-freq
uenc
y Ri
pple
-free
M
axim
um P
ower
Po
int T
rack
ing
Cont
rol
Stra
tegi
es fo
r Ut
ility
-sca
le
Casc
aded
Ph
otov
olta
ic
Syst
em
Non
linea
r Co
ntro
l De
sign
for t
he
Phot
ovol
taic
Is
olat
ed-p
ort
Arch
itect
ure
with
Sub
mod
ule
Inte
grat
ed
Conv
erte
rs
A Hi
gh
Effic
ienc
y an
d Re
liabi
lity
Sing
le-p
hase
Ph
otov
olta
ic
Mic
ro-in
verte
r w
ith H
igh
Mag
netic
s Ut
iliza
tion
for
Non
isol
ated
AC
-mod
ule
Appl
icat
ions
Room
: 201
S83:
Max
imum
Po
wer
Poi
nt
Trac
king
I
New
Ove
rall
Cont
rol S
trate
gy
for W
ind
Ener
gy
Conv
ersi
on
Syst
ems
in
MPP
T an
d St
all
Regi
ons
Smal
l Win
d Tu
rbin
es
Sens
orle
ss
MPP
T:
Robu
stne
ss
anal
ysis
and
Lo
ssle
ss
Appr
oach
Max
imum
-Vo
ltage
-uni
t-gu
ided
MPP
T Al
gorit
hm
for I
mpr
oved
Pe
rform
ance
un
der P
artia
l Sh
adin
g
High
Effi
cien
t Va
riabl
e st
ep S
ize
Incr
emen
tal
Resi
stan
ce
Max
imum
Po
wer
Poi
nt
Trac
ker f
or
PV B
atte
ry
Char
ging
Ap
plic
atio
ns
Room
: 203
S84:
Pow
er
Conv
erte
rs fo
r El
ectr
ic D
rive
s
A N
ovel
In
dire
ct Q
uasi
-Z-
sour
ce M
atrix
Co
nver
ter
Appl
ied
to
Indu
ctio
n M
otor
Dr
ives
AC-A
C 3-
phas
e Dr
ive
Syst
em
Base
d on
Tw
elve
-leg
DC-
link
Conv
erte
r
Stab
ility
An
alys
is a
nd
Dyna
mic
Re
spon
se
of a
DC-
link
Mod
ule
with
a
Serie
s Vo
ltage
Co
mpe
nsat
or
Sing
le-p
hase
Ac
tive
Pow
er
Filte
ring
Met
hod
Usin
g Di
ode-
rect
ifier
-fe
d M
otor
Driv
e
Room
: 205
S85:
Mag
netic
B
eari
ngs
and
Bea
rlin
gles
s M
achi
nes
Desi
gn a
nd T
est
Resu
lt of
Nov
el
Sing
le-d
rive
Bear
ingl
ess
Mot
or w
ith
Cylin
dric
al
Radi
al G
ap
A Pr
inci
ple
and
a Te
st R
esul
t of
a N
ovel
Be
arin
gles
s M
otor
with
M
otor
Par
alle
l W
indi
ng
Stru
ctur
e
Suita
bilit
y In
vest
igat
ion
of
a Be
arin
gles
s Di
sk D
rive
for
Mic
ro T
urbi
ne
Appl
icat
ions
Com
pact
and
Lo
w C
ost
Mag
netic
Be
arin
g w
ith
Satu
rate
d Co
il fo
r Gas
Tur
bine
Ge
nera
tors
Room
: 207
S86:
Dia
gnos
tics
and
Faul
t A
naly
sis
of E
lect
ric
Mac
hine
s I
A N
ovel
Hig
h Se
nsiti
vity
Di
ffere
ntia
l Cu
rren
t Tr
ansf
orm
er fo
r On
line
Heal
th
Mon
itorin
g of
In
dust
rial M
otor
Gr
ound
-wal
l In
sula
tion
Inte
rior
Perm
anen
t M
agne
t Sy
nchr
onou
s M
achi
ne R
otor
De
mag
netiz
atio
n Ch
arac
teris
tics
unde
r Fau
lt Co
nditi
ons
Relia
ble
Dete
ctio
n of
In
duct
ion
Mot
or
Roto
r Fau
lts
unde
r the
Rot
or
Axia
l Air
Duct
In
fluen
ce
Faul
t Typ
e De
tect
ion
usin
g Fr
eque
ncy
Patte
rn o
f St
ator
Cur
rent
in
IPM
-type
BL
DC M
otor
un
der S
tato
r In
ter-
turn
, Dy
nam
ic
Ecce
ntric
ity,
and
Coup
led
Faul
ts
8:00
am
– 8
:25
am
8:25
am
– 8
:50
am
8:50
am
– 9
:15
am
9:15
am
– 9
:40
am
Thur
sday
, Sep
tem
ber 1
97:
00 a
m –
3:0
0 pm
Re
gist
ratio
n ...
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
Lobb
y A
O
ral S
essi
ons
• 8:
00 a
m –
9:4
0 am
9:40
am
– 1
0:00
am
A
M B
reak
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
.Lob
by A
2013 IEEE Energy Conversion Congress & Exposition® • 19Detailed Schedule
Room
: 210
/212
S99:
Pow
er
Elec
tron
ic
Mod
ules
III
Gate
Driv
e In
vest
igat
ions
of
IGBT
M
odul
es w
ith
SiC-
Scho
ttky
Free
whe
elin
g Di
odes
A Hi
gh
Tem
pera
ture
, Do
uble
-sid
ed
Cool
ing
SiC
Pow
er
Elec
troni
cs
Mod
ule
Adva
nced
Pa
ckag
ing
of S
iC P
ower
M
odul
e fo
r Au
tom
otiv
e Ap
plic
atio
ns
Anti-
serie
s N
orm
ally
-on
SiC
JFET
s Op
erat
ing
as B
idire
ctio
nal
Switc
hes
Room
: 102
S88:
Wir
eles
s Po
wer
Tran
sfer
II
Anal
ysis
and
Co
ntro
l of S
/SP
Com
pens
atio
n Co
ntac
tless
Re
sona
nt
Conv
erte
r w
ith C
onst
ant
Volta
ge G
ain
A N
ovel
Fas
t-sw
itchi
ng
Cont
rol f
or
Mul
tiple
Pic
kup
IPT
Syst
ems
Cont
actle
ss
Slip
ring
Syst
em b
ased
on
Rot
atin
g M
agne
tic
Fiel
d Pr
inci
ple
for R
otar
y Ap
plic
atio
ns
Expe
rimen
tal
Verif
icat
ions
an
d De
sign
Pr
oced
ure
of a
n AC
-DC
Conv
erte
r w
ith In
put
Impe
danc
e M
atch
ing
for W
irele
ss
Pow
er T
rans
fer
Syst
ems
Room
: 103
/105
S89:
HVD
C an
d FA
CTS
Mul
ti-m
odul
e Bi
dire
ctio
nal
Buck
-boo
st
Inve
rter-
base
d HV
DC
Back
-to-b
ack
Tran
smis
sion
Sy
stem
Pow
er F
low
Ro
uter
Se
nsiti
vitie
s fo
r Pos
t-co
ntin
genc
y Co
rrec
tive
Cont
rol
Expe
rimen
tal
Valid
atio
n of
Mod
ular
Tr
ansf
orm
er
Conv
erte
r Bas
ed
Conv
ertib
le
Stat
ic
Tran
smis
sion
Co
ntro
ller f
or
Tran
smis
sion
Gr
id
Man
agem
ent
A Co
ntro
l St
ruct
ure
for
Line
-freq
uenc
y-sw
itche
d ST
ATCO
Ms
unde
r Sys
tem
Fa
ults
Room
: 104
/106
S90:
Win
d Fa
rm
Conn
ectio
n
A Bo
ost
Conv
ersi
on
Syst
em
Cons
istin
g of
M
ultip
le D
C-DC
Con
verte
r M
odul
es fo
r In
terfa
cing
W
ind
Farm
s an
d HV
DC
Tran
smis
sion
An A
dapt
ive
Phas
e-lo
cked
Lo
op A
lgor
ithm
fo
r Fas
ter F
ault
Ride
Thr
ough
Pe
rform
ance
of
Inte
rcon
nect
ed
Rene
wab
le
Ener
gy S
ourc
es
Com
preh
ensi
ve
Mod
elin
g of
Tur
bine
Sy
stem
s fro
m
Win
d to
Ele
ctric
Gr
id
Mul
ti-m
egaw
att
Win
d Tu
rbin
e Co
nver
ter
Conf
igur
atio
ns
Suita
ble
for
Off-s
hore
Ap
plic
atio
ns,
Com
bini
ng 3
-L
NPC
PEB
Bs
Room
: 107
/109
S91:
Dis
trib
uted
G
ener
atio
n II
Sync
hron
izatio
n in
Hig
hly
Dist
orte
d 3-
phas
e Gr
ids
usin
g Se
lect
ive
Not
ch F
ilter
s
Isla
ndin
g De
tect
ion
in
Grid
-con
nect
ed
Pow
er
Conv
erte
rs u
sing
Ha
rmon
ics
Due
to th
e N
on-id
eal
Beha
vior
of t
he
Inve
rter
Dece
ntra
lized
Co
ntro
l of
MTD
C N
etw
orks
with
En
ergy
Sto
rage
an
d Di
strib
uted
Ge
nera
tion
Cont
rol S
yste
m
Tuni
ng a
nd
Stab
ility
An
alys
is
of V
irtua
l Sy
nchr
onou
s M
achi
nes
Room
: 108
S92:
Con
vert
er
App
licat
ions
Min
iatu
re S
elf-
pow
ered
Stic
k-on
Wire
less
Se
nsor
Nod
e fo
r Mon
itorin
g of
Ove
rhea
d Po
wer
Lin
es
A Lo
w-c
ost
Elec
tric-
field
Ene
rgy
Harv
este
r for
an
MV/
HV A
sset
-m
onito
ring
Smar
t-sen
sor
Desi
gn a
nd
Anal
ysis
of
Inte
grat
ed
Driv
er fo
r Pi
ezoe
lect
ric
Actu
ator
s
A Lo
w P
ower
Co
nsum
ptio
n Dr
iver
with
Low
Ac
oust
ics
for
Piez
oele
ctric
Sy
nthe
tic J
ets
Room
: 110
/112
S93:
Mat
rix
Conv
erte
rs
Com
paris
on
of 3
-pha
se
AC-A
C M
atrix
Co
nver
ter a
nd
Volta
ge D
C-lin
k Ba
ck-to
-bac
k Co
nver
ter
Topo
logi
es
Base
d on
EM
I Fi
lter
Effic
ienc
y an
d Da
mpi
ng C
ontro
l Ev
alua
tion
of a
M
atrix
Con
verte
r w
ith a
Boo
st-u
p AC
Cho
pper
in
Adj
usta
ble
Spee
d Dr
ive
Syst
em
New
Con
trol
Stra
tegy
for
Indi
rect
Mat
rix
Conv
erte
rs
Oper
atin
g in
Bo
ost M
ode
A M
odul
atio
n St
rate
gy
for M
atrix
Co
nver
ter
with
Ext
ende
d Co
ntro
l Ran
ge
and
Redu
ced
Switc
hing
Po
wer
Los
ses
Room
: 111
/113
S94:
Sin
gle
Phas
e D
C to
AC
Inve
rter
s I
Nov
el S
oft-
switc
hing
Sn
ubbe
rless
N
atur
ally
Cla
mpe
d Cu
rren
t-fed
Ful
l-br
idge
Fro
nt-e
nd
Conv
erte
r Bas
ed
Bidi
rect
iona
l In
verte
r for
Re
new
able
, M
icro
grid
, and
UP
S Ap
plic
atio
ns
A So
ft-sw
itchi
ng F
ull-
brid
ge In
verte
r w
ith H
igh
Effic
ienc
y
Impe
danc
e De
sign
of
Quas
i-Z S
ourc
e N
etw
ork
to
Lim
it Do
uble
Fu
ndam
enta
l Fr
eque
ncy
Volta
ge a
nd
Curr
ent R
ippl
es
in S
ingl
e-ph
ase
Quas
i-Z S
ourc
e In
verte
r
Curr
ent-f
ed
DC-D
C To
polo
gy
Base
d In
verte
r
Room
: 201
S95:
Max
imum
Po
wer
Poi
nt
Trac
king
II
Curr
ent-
Sens
orle
ss
Pow
er-a
ngle
-ba
sed
MPP
T fo
r Sin
gle-
stag
e Gr
id-c
onne
cted
Ph
otov
olta
ic
Volta
ge-s
ourc
e In
verte
rs
Max
imum
Pow
er
Poin
t Tra
ckin
g Al
gorit
hm w
ith
Adva
nced
Sta
te
Dete
ctio
n an
d Re
gres
sion
An
alys
is fo
r Sm
all W
ind
Ener
gy S
yste
ms
A M
axim
um
Pow
er P
oint
Tr
acki
ng
Met
hod
for
PV S
yste
ms
Supp
lyin
g a
Perio
dic
Non
linea
r Loa
d
A Di
strib
uted
Ap
proa
ch to
M
PPT
for P
V Su
b-m
odul
e Di
ffere
ntia
l Po
wer
Pr
oces
sing
Room
: 203
S96:
Dri
ve
Topo
logi
es
and
Pack
agin
g fo
r Hyb
rid
and
Elec
tric
Veh
icle
s
A Hi
gh
Tem
pera
ture
Tr
actio
n In
verte
r with
Re
duce
d Co
olin
g an
d Im
prov
ed
Effic
ienc
y fo
r HEV
Ap
plic
atio
ns
A Va
riabl
e Vo
ltage
Co
nver
ter w
ith
Dire
ct B
ypas
s fo
r Tra
ctio
n Dr
ive
Inve
rters
An In
verte
r Pa
ckag
ing
Sche
me
for
an In
tegr
ated
Se
gmen
ted
Trac
tion
Driv
e Sy
stem
Low
Vol
tage
an
d Hi
gh P
ower
DC
-AC
Inve
rter
Topo
logi
es
for E
lect
ric
Vehi
cles
Room
: 205
S97:
Noi
se
and
Vibr
atio
n in
Ele
ctri
c M
achi
nes
Anal
ytic
al
Expr
essi
on
of P
ulsa
ting
Torq
ue
harm
onic
s du
e to
PW
M D
rives
Supp
ress
ion
Cont
rol o
f Ra
dial
For
ce
Vibr
atio
n du
e to
Fun
dam
enta
l Pe
rman
ent-
mag
net F
lux
in
IPM
SM
Mul
ti-ph
ysic
s An
alys
is o
f Do
uble
Sta
tor
Switc
hed
Relu
ctan
ce
Mac
hine
s
Influ
ence
of
Pol
e an
d Sl
ot N
umbe
r Co
mbi
natio
ns
on C
oggi
ng
Torq
ue in
Pe
rman
ent
Mag
net
Mac
hine
s w
ith S
tatic
an
d Ro
tatin
g Ec
cent
riciti
es
Room
: 207
S98:
IPM
M
achi
nes
II
Mul
ti-ob
ject
ive
Trad
eoffs
in
the
Desi
gn
Optim
izatio
n of
a B
rush
less
Pe
rman
ent
Mag
net
Mac
hine
with
Fr
actio
nal-s
lot
Conc
entra
ted
Win
ding
s
Circ
ulat
ing
Curr
ent i
n Pa
ralle
l Co
nnec
ted
Stat
or W
indi
ngs
due
to R
otor
Ec
cent
ricity
in
Per
man
ent
Mag
net M
otor
s
Impa
ct o
f In
terio
r Pe
rman
ent
Mag
net
Roto
r Des
ign
on S
igna
l In
ject
ion
Base
d Se
nsor
less
Co
ntro
l an
d Po
wer
Co
nver
sion
Desi
gn a
nd
Cont
rol o
f IP
MSM
Se
nsor
less
Dr
ive
for
Mec
hani
cal
Roto
r Pos
ition
De
tect
ion
Capa
bilit
y
10:0
0 am
– 1
0:25
am
10:2
5 am
– 1
0:50
am
10:5
0 am
– 1
1:15
am
11:1
5 am
– 1
1:40
am
Thur
sday
, Sep
tem
ber 1
9 (C
ontin
ued)
O
ral S
essi
ons
• 10
:00
am –
11:
40 a
m
12:0
0 pm
– 1
:30
pm
Awar
ds L
unch
.....
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
....M
ile H
igh
Ballr
oom
20 • 2013 IEEE Energy Conversion Congress & Exposition® Detailed Schedule
Room
: 210
/212
S111
: Wid
e B
andg
ap
Sem
icon
duct
ors
III
A 36
00V,
80A
Sing
le E
xter
nal-
driv
er S
erie
s Co
nnec
ted
Circ
uit w
ith
Thre
e Si
licon
Ca
rbid
e M
OSFE
Ts
Perfo
rman
ce
Cons
ider
atio
n of
an
AC
Coup
led
Gate
Dr
ive
Circ
uit
with
For
war
d Bi
as fo
r N
orm
ally
-on
SiC
JFET
s
Perfo
rman
ce
Com
paris
on
of 1
200V
100
A Si
C M
OSFE
T an
d 12
00V
100A
Si
licon
IGBT
High
-te
mpe
ratu
re
Char
acte
rizat
ion
and
Com
paris
on
of 1
.2 k
V Si
C Po
wer
MOS
FETs
Room
: 102
S100
: Wir
eles
s Po
wer
Tran
sfer
III
Anal
ysis
and
Co
mpa
rison
of
Sec
onda
ry
Serie
s- a
nd
Para
llel-
com
pens
ated
IP
T Sy
stem
s
Wire
less
Fle
et
Char
ging
Sy
stem
for
Elec
tric
Bicy
cles
Indu
ctiv
e Po
wer
Tra
nsfe
r by
Mea
ns
of M
ultip
le
Freq
uenc
ies
in
the
Mag
netic
Li
nk
Self-
osci
llatin
g Co
ntac
tless
Re
sona
nt
Conv
erte
r w
ith P
hase
De
tect
ion
Cont
actle
ss
Curr
ent
Tran
sfor
mer
Room
: 103
/105
S101
: Gri
d Co
nnec
ted
Conv
erte
rs I
Anal
ysis
on
Capa
bilit
y of
Har
mon
ic
Dam
ping
us
ing
Activ
e Fi
lter A
ctin
g as
Res
istiv
e Ha
rmon
ic
Impe
danc
e
Anti-
isla
ndin
g De
tect
or b
ased
on
a R
obus
t PLL
Auto
-tuni
ng
base
d Re
sona
nce
Dam
ping
of
Grid
conn
ecte
d Vo
ltage
Sou
rce
Inve
rters
w
ith L
ong
Tran
smis
sion
Ca
ble
Test
Bed
Im
plem
enta
tion
of 3
80V
DC
Dist
ribut
ion
Syst
em U
sing
Is
olat
ed
Bidi
rect
iona
l Po
wer
Co
nver
ters
Room
: 104
/106
S102
: Win
d En
ergy
Co
nver
ters
Non
linea
r Co
ntro
l of
Win
d En
ergy
Co
nver
sion
Sy
stem
Bas
ed
on C
ontro
l-Ly
apun
ov
Func
tion
Life
time
Estim
atio
n fo
r the
Po
wer
Sem
i-co
nduc
tors
Co
nsid
erin
g M
issi
on P
rofil
es
in W
ind
Pow
er
Conv
erte
r
Curr
ent-b
ased
Ec
cent
ricity
De
tect
ion
for D
irect
-dr
ive
Win
d Tu
rbin
es v
ia
Sync
hron
ous
Sam
plin
g
Perm
anen
t-m
agne
t Sy
nchr
onou
s-ge
nera
tor
Win
d-en
ergy
Sy
stem
s w
ith
Boos
t Mat
rix
Conv
erte
rs
Room
: 107
/109
S103
: Dis
trib
uted
G
ener
atio
n III
On th
e Us
e of
Rea
l-tim
e Si
mul
atio
n Te
chno
logy
in
Sm
art G
rid
Rese
arch
and
De
velo
pmen
t
Para
met
er
Desi
gn a
nd
Impa
cts
on
Pow
er Q
ualit
y of
a Q
-f Dr
oop
Curv
e Ba
sed
Isla
ndin
g De
tect
ion
Met
hod
Reac
tive
Pow
er
Sche
dule
r fo
r Vol
tage
Re
gula
tion
of
Dist
ribut
ed
Ener
gy S
yste
ms
Broa
dban
d M
etho
ds fo
r On
line
Grid
Im
peda
nce
Mea
sure
men
t
Room
: 108
S104
: AC-
DC
Mul
ti-ph
ase
II
Disc
rete
-tim
e On
e Cy
cle
Cont
rol o
f VI
ENN
A Re
ctifi
ers
Cons
ider
ing
the
DC-li
nk N
eutra
l-po
int V
olta
ge
Bala
nce
Eval
uatio
n of
LCL
Filt
er
Indu
ctor
and
Ac
tive
Fron
t En
d Re
ctifi
er
Loss
es U
nder
Di
ffere
nt P
WM
M
etho
d
Optim
izatio
n an
d Co
mpa
rison
of
Tw
o So
ft Sw
itche
d Hi
gh V
olta
ge
Conv
erte
r M
odul
ator
To
polo
gies
Com
para
tive
Eval
uatio
n of
Si
C De
vice
s fo
r PW
M B
uck
Rect
ifier
Bas
ed
Activ
e Fr
ont
End
Conv
erte
r fo
r MV
Grid
In
terfa
ce
Room
: 110
/112
S105
: Mul
tilev
el
Conv
erte
rs II
A Co
ncep
t of
Mul
ti-le
vel
Conv
erte
r Bu
ildin
g M
odul
es to
Re
alize
Hig
her
Num
ber o
f Ou
tput
Lev
els
Scal
ing
the
Cont
rolla
ble
Net
wor
k Tr
ansf
orm
er
(CN
T) to
Util
ity-
leve
l Vol
tage
s w
ith D
irect
-AC/
AC P
ower
El
ectro
nic
Build
ing
Bloc
ks
(PEB
Bs)
Bidi
rect
iona
l Th
ree
Port,
3-
phas
e M
ultil
evel
In
verte
r Bas
ed
on S
witc
hed
Capa
cito
r Cel
ls
Low
-vol
tage
-rid
e-th
roug
h (L
VRT)
Cap
abili
ty
of a
Pha
se-
shift
ed-P
WM
ST
ATCO
M U
sing
th
e M
odul
ar
Mul
tilev
el
Casc
ade
Conv
erte
r Bas
ed
on S
ingl
e-st
ar
Brid
ge-c
ells
(M
MCC
-SSB
C)
Room
: 111
/113
S106
: Sin
gle
Phas
e D
C to
AC
Inve
rter
s II
A M
ultil
evel
En
ergy
Buf
fer
and
Volta
ge
Mod
ulat
or fo
r Gr
id-in
terfa
ced
Mic
ro-in
verte
rs
Quas
i Var
iabl
e Ca
paci
tor
Appl
ied
to
Soft
Switc
hing
In
verte
r for
In
duct
ion
Heat
ing
Com
mon
-m
ode
Volta
ge
Redu
ctio
n M
etho
d of
PW
M C
urre
nt
Sour
ce In
verte
r M
odify
ing
the
Dist
ribut
ion
of
Zero
Cur
rent
A Si
ngle
-pha
se
Curr
ent S
ourc
e PV
Inve
rter
with
Pow
er
Deco
uplin
g Ca
pabi
lity
usin
g an
Act
ive
Buffe
r
Room
: 201
S107
: Lig
htin
g Te
chno
logi
es I
A Re
view
and
Cl
assi
ficat
ion
of
LED
Balla
sts
A Hi
gh-
frequ
ency
Di
gita
lly
Cont
rolle
d LE
D Dr
iver
for
Auto
mot
ive
Appl
icat
ions
w
ith F
ast
Dim
min
g Ca
pabi
litie
s
Dais
y-ch
ain
Tran
sfor
mer
St
ruct
ure
for C
urre
nt-
bala
ncin
g M
ultip
le L
ED
Strin
gs
A Di
mm
able
LE
D Dr
iver
Us
ing
Resi
stiv
e DA
C Fe
edba
ck
Cont
rol f
or
Adap
tive
Volta
ge
Regu
latio
n
Room
: 203
S108
: Ene
rgy
Effic
ient
Mot
or
Dri
ves
Ener
gy S
avin
g St
art-u
p M
etho
d by
Co
mbi
ned
Use
of T
wo
Posi
tion
Sens
orle
ss
Cont
rols
Max
imum
Ef
ficie
ncy
Driv
es o
f Sy
nchr
onou
s Re
luct
ance
M
otor
s w
ith
On-li
ne S
tato
r Re
sist
ance
Es
timat
or
Mul
ti-m
ode
Cont
rol S
trate
gy
in S
mal
l-sca
le
Win
d Tu
rbin
e Ge
nera
tors
fo
r Wid
er
Oper
atin
g Sp
eed
Rang
e an
d Hi
gher
Ef
ficie
ncy
Oper
atio
n
Num
eric
al
Desi
gn
Met
hodo
logy
of
Opt
imal
Tr
ajec
torie
s fo
r Effi
cien
t In
duct
ion
Mot
or
Driv
e ba
sed
on
a Lo
ss M
ap
Room
: 205
S109
: Nor
io
Taka
hash
i M
emor
ial
Sess
ion:
Los
ses
in E
lect
rica
l M
achi
nes
Anal
ysis
of t
he
Tem
pera
ture
De
pend
ence
of
Los
ses
in
Elec
trica
l M
achi
nes
Impa
ct o
f De
ad-ti
me
on
Iron
Loss
es in
In
verte
r-fe
d M
agne
tic
Mat
eria
ls
The
Min
or
Hyst
eres
is L
oop
unde
r Rot
atin
g M
agne
tic F
ield
s in
Mac
hine
La
min
atio
ns
A Co
mbi
ned
Hyst
eres
is
and
Eddy
-cu
rren
t Mod
el
Deve
lope
d fo
r a W
ide
Freq
uenc
y Ra
nge
in
Elec
tric
Mac
hine
Ap
plic
atio
ns
3:20
pm
– 3
:40
pm
PM B
reak
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
......
.Lob
by A
1:30
pm
– 1
:55
pm
1:55
pm
– 2
:20
pm
2:20
pm
– 2
:45
pm
2:45
pm
– 3
:10
pm
Room
: 207
S110
: Axi
al F
lux
Mac
hine
s
Oper
atio
n Ch
arac
teris
tics
of F
errit
e Pe
rman
ent
Mag
net I
n-w
heel
Ax
ial-g
ap M
otor
w
ith C
orel
ess
Roto
r Stru
ctur
e fo
r Ele
ctric
City
Co
mm
uter
s
Omeg
a Sh
aped
Ax
ial-f
lux
Perm
anen
t-m
agne
t M
achi
ne fo
r Di
rect
-driv
e Ap
plic
atio
ns
with
Co
nstra
ined
Sh
aft H
eigh
t
FEA
Estim
atio
n an
d Ex
perim
enta
l Va
lidat
ion
of
Solid
Rot
or a
nd
Mag
net E
ddy
Curr
ent L
oss
in S
ingl
e-si
ded
Axia
l Flu
x Pe
rman
ent
Mag
net
Mac
hine
s
Line
-sta
rt Ax
ial-
flux
Perm
anen
t-m
agne
t Sy
nchr
onou
s M
otor
Thur
sday
, Sep
tem
ber 1
9 (C
ontin
ued)
O
ral S
essi
ons
• 1:
30 p
m –
3:1
0 pm
2013 IEEE Energy Conversion Congress & Exposition® • 21Detailed Schedule
Room
: 210
/212
S123
: Gal
lium
N
itrid
e D
evic
es
Galli
um N
itrid
e Ba
sed
High
Po
wer
-den
sity
Au
tom
otiv
e HI
D El
ectro
nic
Balla
st
Eval
uatio
n of
600
V
Casc
ode
GaN
HE
MT
in D
evic
e Ch
arac
teriz
atio
n an
d Al
l-GaN
-ba
sed
LLC
Reso
nant
Co
nver
ter
Sim
ulat
ion
Mod
el
Deve
lopm
ent
and
Verif
icat
ion
for H
igh
Volta
ge
GaN
HEM
T in
Cas
code
St
ruct
ure
Anal
ytic
al
Loss
Mod
el o
f Hi
gh V
olta
ge
GaN
HEM
T in
Cas
code
Co
nfig
urat
ion
Room
: 102
S112
: Wir
eles
s Po
wer
Tran
sfer
IV
High
Effi
cien
cy
Cont
actle
ss
Pow
er T
rans
fer
Syst
em fo
r El
ectri
c Ve
hicl
e Ba
ttery
Ch
argi
ng
Appl
icat
ion
Vehi
cle-
to-g
rid
Sche
me
base
d on
Indu
ctiv
e Po
wer
Tra
nsfe
r fo
r Adv
ance
d Di
strib
utio
n Au
tom
atio
n
Sing
le-p
hase
Ac
tive
Boos
t Re
ctifi
er w
ith
Pow
er F
acto
r Co
rrec
tion
for W
irele
ss
Pow
er T
rans
fer
Appl
icat
ions
Optim
al D
esig
n M
etho
d to
Ac
hiev
e Bo
th G
ood
Robu
stne
ss a
nd
Effic
ienc
y in
Lo
osel
y-co
uple
d W
irele
ss
Char
ging
Sys
tem
Em
ploy
ing
Serie
s-pa
ralle
l Re
sona
nt
Tank
with
As
ymm
etric
al
Mag
netic
Co
uple
r
Room
: 103
/105
S113
: Gri
d Co
nnec
ted
Conv
erte
rs II
Forw
ard-
type
M
icro
-inve
rter
with
Cur
rent
De
coup
ling
Inve
rter C
ontro
l St
rate
gy fo
r DG
Sys
tem
s ba
sed
on th
e Co
nser
vativ
e Po
wer
The
ory
15 k
V Si
C IG
BT
base
d 3-
phas
e,
Thre
e-le
vel,
Mod
ular
-le
g Po
wer
Co
nver
ter
Grid
Har
mon
ics
and
Volta
ge
Unba
lanc
e Ef
fect
El
imin
atio
n fo
r 3-p
hase
PL
L Gr
id
Sync
hron
izatio
n Al
gorit
hm
Room
: 104
/106
S114
: Win
d En
ergy
Te
chno
logi
es
Varia
ble
Spee
d W
ind
Pow
er P
lant
Op
erat
ing
with
Re
serv
e Po
wer
Ca
pabi
lity
Mod
elin
g of
a
Hydr
aulic
W
ind
Pow
er
Ener
gy T
rans
fer
Syst
em U
tilizi
ng
a Pr
opor
tiona
l Va
lve
Estim
atio
n of
W
ake
Effe
ct
in W
ind
Farm
s Us
ing
Desi
gn
of E
xper
imen
t M
etho
dolo
gy
Anal
ysis
of G
rid
Curr
ent C
ontro
l in
Con
side
ratio
n of
Vol
tage
Fe
edfo
rwar
d an
d Ca
ble
Capa
cita
nce
Dem
onst
rate
d on
a F
ully
Size
d W
ind
Turb
ine
Inst
alle
d in
a
Win
d Pa
rk
Room
: 107
/109
S115
: AC-
DC
Mul
ti-ph
ase
III
Cont
rol
Algo
rithm
of
High
Pow
er
Rect
ifier
Sy
stem
in D
C Ar
c Fu
rnac
e fo
r Im
prov
ed A
rc
Stab
ility
A Ge
nera
lized
DQ
Impe
danc
e M
odel
of
3-ph
ase
Diod
e Re
ctifi
er
DC-li
nk C
urre
nt
Cont
rol S
chem
e fo
r Par
alle
led
3-ph
ase
Curr
ent S
ourc
e Re
ctifi
ers
in
High
Effi
cien
cy
Pow
er S
uppl
y Sy
stem
Anal
ysis
of
Non
linea
r Si
deba
nd
Effe
cts
in S
mal
l-si
gnal
Inpu
t dq
Adm
ittan
ce o
f Tw
elve
-pul
se
Diod
e Re
ctifi
ers
Room
: 108
S116
: Mod
ular
M
ultil
evel
Co
nver
ters
Mod
ular
M
ultil
evel
Co
nver
ter
base
d on
Cu
rren
t Sou
rce
H-br
idge
Cel
ls
Impl
emen
ted
with
Low
Cos
t Re
vers
ing
Cond
uctin
g IG
CT
Optim
al
Sele
ctio
n of
th
e Av
erag
e Ca
paci
tor
Volta
ge fo
r M
odul
ar
Mul
tilev
el
Conv
erte
rs
Deve
lopm
ent
of a
500
-kW
M
odul
ar
Mul
tilev
el
Casc
ade
Conv
erte
r fo
r Bat
tery
En
ergy
Sto
rage
Sy
stem
s
A Pa
ralle
l-re
dund
ant
BTB
(Bac
k-to
-ba
ck) S
yste
m
usin
g M
odul
ar
Mul
tilev
el
Casc
ade
Conv
erte
rs
for P
ower
Tr
ansm
issi
on
Grid
s
Room
: 110
/112
S117
: Sin
gle
Phas
e A
C-D
C
PFC
Conv
erte
r w
ith N
ovel
In
tegr
atio
n of
bo
th E
MI F
ilter
an
d Bo
ost
Indu
ctor
s
A Po
wer
Sup
ply
Reac
hing
Ti
tani
um L
evel
Ef
ficie
ncy
for a
W
ide
Rang
e of
In
put V
olta
ges
A Pr
imar
y-si
de-
cont
rol Q
uasi
-re
sona
nt F
lyba
ck
Conv
erte
r w
ith T
ight
Ou
tput
Vol
tage
Re
gula
tion
and
Self-
calib
rate
d Va
lley
Switc
hing
Full-
brid
ge
Sing
le-s
tage
PF
C w
ith
Redu
ced
DC
Bus
Capa
cito
r an
d Im
prov
ed
Ligh
t Loa
d Op
erat
ion
as
a So
lutio
n fo
r M
oder
n SM
PS
Room
: 111
/113
S118
: Sin
gle
Phas
e D
C to
AC
Inve
rter
s III
Mod
ulat
ion
Sche
me
for a
Di
ffere
ntia
l-m
ode
Cuk
Inve
rter f
or
Loss
Miti
gatio
n
DSPI
C M
icro
cont
rolle
r Ba
sed
Impl
emen
tatio
n of
a F
lyba
ck P
V M
icro
inve
rter
Usin
g Di
rect
Di
gita
l Sy
nthe
sis
Load
Im
peda
nce
Estim
atio
n an
d Ite
rativ
e-le
arni
ng C
ontro
l fo
r a S
ingl
e-ph
ase
Thre
e-w
ire In
verte
r
Para
llel
Oper
atio
n of
Dig
ital
Cont
rolle
d M
odifi
ed S
ine
Wav
e In
verte
rs
3:30
pm
– 3
:55
pm
3:55
pm
– 4
:20
pm
4:20
pm
– 4
:45
pm
4:45
pm
– 5
:10
pm
Room
: 201
S119
: Lig
htin
g Te
chno
logi
es II
A Si
ngle
-in
duct
or,
Mul
tiple
-ch
anne
l Cu
rren
t-ba
lanc
ing
LED
Driv
er
for D
ispl
ay
Back
light
Ap
plic
atio
ns
Zero
Rip
ple
Sing
le S
tage
AC
-DC
LED
Driv
er W
ith
Unity
Pow
er
Fact
or
A N
ovel
Pul
se
Curr
ent D
rivin
g;
High
Pow
er
Fact
or L
ED
Driv
er W
ithou
t El
ectro
lytic
Ca
paci
tors
Digi
tal
Impl
emen
tatio
n of
the
Feed
forw
ard
Loop
of t
he
Asym
met
rical
Ha
lf-br
idge
Co
nver
ter f
or
LED
Ligh
ting
Appl
icat
ions
Room
: 203
S120
: Mod
el-
base
d Se
nsor
less
Co
ntro
l
Stab
ility
and
Dy
nam
ic
Perfo
rman
ce
Impr
ovem
ent
of a
Sen
sorle
ss
IPM
SM D
rive
via
Adap
tive
Estim
ated
-spe
ed-
assi
sted
Pos
ition
Pr
edic
tion
and
Curr
ent Q
ualit
y Ev
alua
tion
Com
para
tive
Anal
ysis
of
Feed
back
Gai
ns
for A
dapt
ive
Full-
orde
r Ob
serv
ers
in
Sens
orle
ss
Indu
ctio
n M
otor
Dr
ives
Sign
al-in
ject
ion
Assi
sted
Ful
l-or
der O
bser
ver
with
Par
amet
er
Adap
tatio
n fo
r Sy
nchr
onou
s Re
luct
ance
M
otor
Driv
es
A N
ovel
Ap
proa
ch to
th
e De
sign
of
Bac
k-EM
F Ob
serv
er B
ased
Se
nsor
less
Co
ntro
l of N
on-
salie
nt P
MSM
: Th
eore
tical
An
alys
is a
nd
Expe
rimen
tal
Inve
stig
atio
ns
Room
: 205
S121
: Hig
h Fr
eque
ncy
Effe
cts
in
Elec
tric
M
achi
nes
Expe
rimen
tal
and
Anal
ytic
al
Dete
rmin
atio
n of
Pro
xim
ity
Loss
es in
a
High
-spe
ed P
M
Mac
hine
Roto
r Im
peda
nce
of th
e Hi
gh-
frequ
ency
Ci
rcul
atin
g Be
arin
g Cu
rren
t Pat
h in
In
verte
r-fe
d AC
M
achi
nes
Skin
effe
ct
and
Prox
imity
Lo
sses
in
High
Spe
ed
Brus
hles
s Pe
rman
ent
Mag
net M
otor
s
A St
ator
Tur
n-fa
ult D
etec
tion
Met
hod
for
Inve
rter-
fed
IPM
SM w
ith
High
-freq
uenc
y Cu
rren
t In
ject
ion
Room
: 207
S122
: D
iagn
ostic
s an
d Fa
ult A
naly
sis
of E
lect
ric
Mac
hine
s II
Accu
rate
an
d Si
mpl
e Di
agno
sis
Algo
rithm
for
Inte
r-tu
rn F
ault
in th
e BL
DC
Mot
or
A N
ovel
On
line
Stat
or
Grou
ndw
all
Insu
latio
n M
onito
ring
Sche
me
for
Inve
rter-
fed
AC
Mot
ors
A De
taile
d Tr
ansi
ent M
odel
of
Inte
rior
Perm
anen
t M
agne
t Mot
or
Acco
untin
g fo
r Sat
urat
ion
unde
r Sta
tor
Turn
Fau
lt
Faul
t Dia
gnos
is
of M
echa
nica
l Un
bala
nce
for
PMSM
Driv
e Sy
stem
Und
er
Non
stat
iona
ry
Cond
ition
Thur
sday
, Sep
tem
ber 1
9 (C
ontin
ued)
O
ral S
essi
ons
• 3:
30 p
m –
5:1
0 pm
Event Services
Registration
Sunday through ThursdayLobby A
On-site registration will be open during the following hours:Sunday, September 15 ........................................ 7:00 am – 7:00 pmMonday, September 16 ....................................... 7:00 am – 7:00 pmTuesday, September 17 ....................................... 7:00 am – 6:00 pmWednesday, September 18 ................................. 7:00 am – 7:00 pmThursday, September 19 ..................................... 7:00 am – 3:00 pm
Full Conference Registration
Full Conference Registration admits one entrance into all tech-nical sessions, plenary sessions, townhall meetings, access to the exhibition and all social functions. Additional guest tickets for receptions can be purchased at the Registration Desk.
Full Conference Registration RatesIEEE Member ...........................................................................$775.00Student IEEE Member ............................................................$325.00Society Member ......................................................................$725.00Life Member .............................................................................$400.00Non-Member ........................................................................$1,000.00
One-Day Registration
One-Day Registration admits one entrance into that day’s tech-nical sessions, the plenary sessions*, townhall meetings*, in-dustrial seminars*, and access to the exhibition.
One-Day Registration RatesSociety Member ......................................................................$325.00IEEE Member ...........................................................................$375.00Non-Member ...........................................................................$425.00
Certificate of Attendance
Certifi cates of Attendance will not be provided for ECCE 2013.
Receipts
All who register online will receive a receipt/confi rmation via email. All registrants will also receive a receipt attached to their badge, which can be obtained upon check-in. If you need ad-ditional paperwork, please contact the customer service staff, located in the Registration Desk.
Tutorial Registration*
Tutorials will take place on Sunday, September 15, 2013. You may select one morning session and one afternoon session. The rates are outlined below. The registration rate is the same if you choose to attend either one or two tutorials. The registra-tion fee includes materials for all 12 tutorials.
Society Member ......................................................................$365.00IEEE Member ...........................................................................$390.00Non-Member ...........................................................................$415.00
*Access to specifi ed sessions is permitted only if applicable for that day’s activities.
Expo Only
Expo Only Registration allows access to the Expo only on Tues-day, September 17. Attendees may have access to the Expo hall for complimentary after 2:00 pm on September 17th. If you choose to attend the Expo prior to 2:00 pm, the registration fee is $25 for Expo Only access from 9:00 am – 2:00 pm. You may purchase an Expo Only Registration at the Registration Desk lo-cated just outside the Exhibit Hall.
Guest Tickets
Guests may purchase a registration for $175, which includes admission to the opening reception, awards luncheon and con-ference banquet. A limited number of awards luncheon and conference banquet tickets will be sold onsite. You can still in-clude your guests’ name on the registration form, even if he or she does not want to attend the social functions. You may also purchase individual event tickets per the rates below.
Opening Reception Ticket........................................................$60.00ECCE Banquet Ticket ..............................................................$100.00Awards Luncheon Ticket .........................................................$60.00Industry Student Dinner .........................................................$250.00
Badges
Badges should be worn at all offi cial functions of the meeting. Badge checkers will be stationed throughout the meeting ar-eas. Only those with technical registrations will be allowed into sessions. If you forget or lose your badge, you may obtain a sec-ond badge at the Registration Desk with proof of registration.
Consent to Use of Photographic Images
Registration and attendance at, or participation in, ECCE consti-tutes an agreement by the registrant to ECCE’s use and distribu-tion (both now and in the future) of the registrant or attendee’s image or voice in photographs, videotapes, electronic repro-ductions and audiotapes of such events and activities.
Creative Digressions
Sunday through ThursdayRoom: 204
Creative Digressions is what we call a space reserved for those conference attendees who need to go someplace to think, to discuss, to organize their minds around the hubbub of activi-ties around them. ECCE 2013 is packed with activities that fully engage all the mental capacities of the participants, the din of activity and the excitement of absorbing and understanding new information and knowledge can sometimes be overwhelm-ing. Think of Creative Digressions as an oasis within the confer-ence. The room has been set aside with large tables set up for relaxed conversations rather than for presentation purposes; note pads, easels and white boards are provided in place of cocktail napkins and backs of envelopes to facilitate one-on-one discussions, idea generation sessions, business meetings, or social interactions. Coffee and tea, the lifeblood of engineer-ing, will be provided to fuel the physical mind so that the innova-tive process can continue apace.
22 • 2013 IEEE Energy Conversion Congress & Exposition®
Accessibility for Registrants with Disabilities
The meeting staff will work with attendees to provide reason-able accommodations for those who require special needs. To request assistance on-site, please check in at the Registration Desk.
Business Center
The Convention Center has a Business Center located off Lobby A— near the front door of 14th and California. The Business cen-ter will be accessible to all attendees. There is a log-on charge and each attendee is charged for usage by the minute.
Cameras and Recording Devices
The use of cameras and/or recorders is strictly prohibited dur-ing the oral and poster sessions. Limited use is allowed for Exhibitors in their own booth area. Personal photography is al-lowed at social functions.
First Aid
If you are in need of emergency services or hospital care, the nearest hospitals are as follows:
Presbyterian-Saint Denver HealthLukes Medical Hospital Medical Center1719 East 19th Avenue 777 Bannock StreetDenver, CO 80218 Denver, CO 80204(303) 839-6000 (303) 436-6000
Hotels
The ECCE 2013 headquarters hotel is the Hyatt Regency Denver at Colorado Convention Center:
Hyatt Regency Denver at Colorado Convention Center650 15th StreetDenver, CO 80202(402) 592-6464 or (888) 421-1442
Internet Access
Guest Room Internet is complimentary in IEEE Guestrooms at the Hyatt Regency Denver at Colorado Convention Center. In-ternet at the Convention Center is complimentary and can be accessed in the lobbies, Ballroom Prefunction spaces and the Grand Concourse by connecting to the “Complimentary WIFI” network.
Local Transportation
Taxis Stands are located on Front Drive for convenient access. There is also a free shuttle that picks up and runs along the 16th
Street Mall. For more local transportation information please visit www.rtd-denver.com.
Lost & Found
Lost and found is located at the event registration desk Colo-rado Convention Center.
General Information
Visitor Information Desk
VISIT DENVER has a Visitor Desk at the Colorado Convention Center. The desk is located inside on the 14th Street side near the Big Blue Bear- Lobby A/F. This desk is staffed between 8:00 amand 5:00 pm Monday through Thursday. The staff specialize in Denver recommendations: restaurants, dining reservations, at-tractions, tours, things to do, and transportation options. The desk is also stocked with brochures, Denver Offi cial Visitor Guides, and Discover Denver Discount Brochures.
Parking
Daily Convention Center Parking 0-8 Hours .................................................................... $12.00 8-12 Hours .................................................................. $15.00 12-18 Hours ................................................................ $17.00 18-24 Hours ................................................................ $25.00
Hotel Parking Self-Parking 0-1 hours ............................................. $10.00 1-3 hours ..................................................................... $15.00 3-5 hours ..................................................................... $20.00 5-24 hours and overnight ......................................... $26.00
Valet Parking 0-4 hours ............................................ $20.00 4-8 hours ..................................................................... $26.00 8+ hours ...................................................................... $32.00
Meals & Refreshments
Full conference registration includes all meals, refreshments and social functions (except the Industry Student Dinner) pro-vided by ECCE 2013.
Morning RefreshmentsMonday, Wednesday and Thursday – Lobby ATuesday – Exhibit Hall A
Monday, September 16 ................................... 10:00 am – 10:20 amTuesday, September 17 ..................................... 9:40 am – 10:00 amWednesday, September 18 ............................... 9:40 am – 10:00 amThursday, September 19 ................................... 9:40 am – 10:00 am
LunchTuesday – Exhibit Hall A
Tuesday, September 17 ..................................... 12:00 pm – 2:00 pm
Awards LuncheonThursday – Mile High Ballroom
Thursday, September 19 ................................... 12:00 pm – 1:30 pm
Afternoon RefreshmentsWednesday and Thursday – Lobby ATuesday – Exhibit Hall A
Tuesday, September 17 ....................................... 4:15 pm – 4:30 pmWednesday, September 18 ................................. 3:10 pm – 3:30 pmThursday, September 19 ..................................... 3:20 pm – 3:40 pm
2013 IEEE Energy Conversion Congress & Exposition® • 23
Special Events
Newcomers Session (A Guide to ECCE 2013)
Sunday, 4:00 pm – 5:00 pmRoom: 210/212
This is a new part of the program, consisting of a short ses-sion intended to act as a guide for those who are new to ECCE. The content of this session, however, contains information that should be of interest to anyone who wishes to organize their conference calendar in a meaningful way or to gain a behind-the-curtains feel for the content and organization of the confer-ence. Many members of the organizing committee will describe the program elements that they were responsible for. Vice chairs of the Technical Programs Committee will briefl y discuss the trends and topics that they felt dominated the submissions in various tracks, as well as the submissions to the Special Ses-
sions and the Vendors and Products Session. The Town Hall meeting, the Student program are discussed, as well as the ex-hibition program; the Industrial Seminars will also be one of the featured areas. We hope to give everyone present a concise briefi ng on the upcoming conference.
Meet and Greet the Fellows Reception
Sunday, 5:00 pm – 7:00 pmMile High Prefunction
Join us for a Meet and Greet the Fellows Reception within the Sunday evening Opening Reception of ECCE 2013. A chance to chat, take photos and congratulate the 2013 IEEE Power Elec-tronics Society Class of Fellows that have chosen to receive their award at ECCE.
Ali EmadiMcMaster University
Honored for contributions to electric power conversion and control for electric and hybrid vehicles.
Donald Grahame HolmesRoyal Melbourne Institute of TechnologyUniversity
Honored for contributions to the modulation and control of solid-state power electronic conversion equipment.
Yan-Fei LiuQueens University, Department of Electricaland Computer Engineering
Honored for contributions to digital control techniques of power electronics converters.
Cian MathunaTyndall National Institute, University College Cork
Honored for leadership in the development of power supply using micromagnetics on silicon.
David PerreaultMassachusetts Institute of Technology
Honored for contributions to design and application of very high frequency power electronic converters.
Leon TolbertThe University of Tennessee
Honored for contributions to multilevel power electronic converter technology.
Dehong XuZhejiang University, College of ElectricalEngineering
Honored for contributions to power electronic applications to renewable energy systems.
PELS Fellows
Ahmed Elantably
Honored for contributions to AC machinery for electrical trac-tion.
Ayman EL-RefaieGE Global Research Center
Honored for contributions to high-speed per-manent magnet machines for transportation and aerospace systems.
Dan IonelVestas Wind Turbines R&D
Honored for contributions to the analysis, design and manufacturing of high effi ciency electric machines.
Sreenivasa MurthyIndian Institute of Technology Delhi
Honored for contributions to self-excited induction generators and renewable energy applications.
IAS Fellows
24 • 2013 IEEE Energy Conversion Congress & Exposition®
Special Events
Opening Reception
Sunday, 5:00 pm – 7:00 pmMile High Prefunction
Catch up with your industry partners and friends! Grab a drink and relax before the week ahead.
Expo Reception
Monday, 4:00 pm – 6:30 pmExhibit Hall ASupported by OPAL RT
Enjoy a drink and light snacks while you mingle with industry partners and friends and explore the latest advances in prod-ucts and services to meet the needs of current and future chal-lenges facing the energy conversion industry.
Student Paper Awards
A special thank you to the following companies who have fund-ed this years’ student paper awards:
United Technologies Research CenterBest Student Papers
US Hybrid CorporationBest Paper in Transportation Technologies
WileyBest Student Papers
Industry Student Dinner
Monday, 7:00 pm – 9:30 pmMile High PrefunctionSupported by GE Global Research and Nexteer Automotive
The Industry Student Dinner will bring together students and industry for an information exchange session. Leading industry representatives will present information on the latest technolo-gies and products they are developing and provide opportunity for the student community to see how their learning experienc-es are applied in the industry.
All ECCE 2013 student registrants can participate free in this event. All exhibitors will be given three free tickets to the dinner and will be able to purchase additional tickets for $50. Tickets will be available for $250 for industry engineers, with full confer-ence registrations, who would like the opportunity to network with the students during the event. Tickets can be purchased at the ECCE Registration Desk. This is a great opportunity for ECCE exhibitors to network with students and provide information re-lating to their companies.
We look forward to you joining us for a productive evening!
IEEE-PELS Student Design Competition Workshop:The SOLAR SPLASH
Tuesday, 5:30 pm – 6:30 pm Room: 108
This session/meeting will provide an overview of the rules, events and operations of the IEEE-PELS sponsored student “design, build and compete” solar/electric boat competition, now in its 21st year. Staff members of Solar Splash will discuss advantages and challenges associated with preparing for and competing in the Solar Splash for 2014.
ECCE on Social Media
@ieee_ecce.com #ecce_2013
facebook.com/ieee.ecce
Join the IEEE Energy Conversion and Exposition Group.
2013 IEEE Energy Conversion Congress & Exposition® • 25
Industry Tours
Tuesday and WednesdayLobby A
Join your colleagues for one of the following exciting tours. Tours will depart from the Lobby A entrance at the start times listed below for each tour. Please inquire at the registration desk for more information.
National Wind Technology Center, NREL – Boulder, ColoradoTuesday, September 171:00 pm - 3:30 pm Cost: $40/personLimited to 20 people
NWTC facilities are contained within a 305-acre area that comprises fi eld test sites, test laboratories, industrial high-bay work areas, machine shops, electronics and instrumentation laboratories, and offi ce areas. In addition, there are hundreds of test articles and supporting components such as turbines, meteorological towers, custom test apparatus, test sheds, stor-age areas, and calibration and measurement instruments. We also have data acquisition systems, load frames, computers and electronics, machine tools, supporting heavy equipment, and associated required infrastructure including electrical power, water, fi re protection, and fi ber optic communications.
SMA America LLC., PV Inverter manufacturerWednesday, September 1810:00 am - 12:30 pm Cost: $40/personLimited to 50 people
SMA Solar Technology AG is a global leader in the development, production and sales of PV inverters and, as an energy manage-ment group, offers innovative key technologies for future power supply structures. SMA is represented in all important photovol-taics markets in 19 countries on four continents. The company has a staff of over 5,500 and reached a sales volume of EUR 1.7 billion in 2011.
ECCE Banquet
Wednesday, 7:00 pm – 9:00 pmMile High Ballroom
Join your colleagues for great food, drinks, entertainment and networking.
Special Events26 • 2013 IEEE Energy Conversion Congress & Exposition®
Presenter Information
Oral Presenters
Speaker Ready RoomSaturday through ThursdayRoom: 202
ALL Oral Presenters must check in at the Speaker Ready Room at least 4 hours prior to their scheduled session. Even if you have submitted your presentation in advance and have no changes, you must check and confi rm that the presentation is correct.
The hours of operation of the Speaker Ready Room are:Saturday, September 14 ...................................... 3:00 pm – 5:00 pmSunday, September 15 ........................................ 8:30 am – 5:00 pmMonday, September 16 ....................................... 8:30 am – 5:00 pmTuesday, September 17 ..................................... 8:30 am – 12:00 pmWednesday, September 18 ................................. 8:30 am – 6:00 pmThursday, September 19 ................................... 8:30 am – 12:00 pm
You may also edit your presentation during speaker ready room hours and re-upload it if it is more than 4 hours prior to your session. When you are fi nished, AV personnel will upload your presentation onto the laptop in your scheduled session room. Please note, if you have edits to your presentation less than 4 hours before your session, you will need to bring them with you on a fl ash drive directly to the session room.
should be available for questions at their display boards during their scheduled poster presentation time. If you are unsure in which session your poster should be presented, please review the complete Technical Session schedule starting on page 35.
Poster Presenters will have access to Exhibit Hall A at the Colo-rado Convention Center to set up and tear down their posters at the times listed below for each of the Poster Sessions.
Poster Session I SetupSetup ...........................Monday, September 16, 2:00 pm – 4:00 pmPoster Session...........Monday, September 16, 4:00 pm – 6:30 pmBreakdown .................Monday, September 16, 6:30 pm – 7:30 pm
Presenters for Poster Session I must have their posters set-up no later than 4:00 pm. Any posters that remain on the poster boards at 7:30 pm, and do not belong in Poster Session II will be removed and kept at the Registration Desk.
Poster Session II SetupSetup ...........................Tuesday, September 17, 8:00 am – 9:00 amPoster Session.......Tuesday, September 17, 10:00 am – 11:30 amBreakdown .............Tuesday, September 17, 11:30 am – 12:30 pm
Presenters for Poster Session II must have their posters set-up no later than 9:00 am. Any posters that remain on the poster boards at 12:30 pm, and do not belong in Poster Session III will be removed and kept at the Registration Desk.
Poster Session III SetupSetup ...........................Tuesday, September 17, 2:00 pm – 3:00 pmPoster Session...........Tuesday, September 17, 3:30 pm – 5:00 amBreakdown .................Tuesday, September 17, 6:00 pm – 7:00 pm
Presenters for Poster Session I must have their posters set-up no later than 3:00 pm. Any posters that remain on the poster boards at 7:00 pm, will be removed and kept at the Registration Desk. Uncollected posters will be discarded.
Poster Boards & Push-pins4’ x 8’ poster boards will be provided, so please keep these di-mensions in mind when printing your posters. Push pins will be provided for all poster presenters.
Oral Presenters’ Orientation and BreakfastA presenters’ orientation will be held for oral present-ers and session chairs from 7:00 am – 8:00 am, Monday through Thursday, at the Colorado Convention Center. The location for the breakfast is as follows:• Monday and Tuesday – Room 103/105• Wednesday and Thursday – Mile High Ballroom
Oral presenters should meet with their respective ses-sion chairs to review the format and timing of their ses-sion and alert conference management of any changes. Oral Presenters should attend the orientation each day that they are scheduled to provide an oral presentation (or chair a session); you may only attend on days on which you are scheduled to speak.
Poster Presenter’s OrientationA presenters’ orientation will be held for poster present-ers on Monday and Tuesday at the Colorado Convention Center. The orientation will be located at the stage inExhibit Hall A as follows:• Monday – 1:30 pm – 2:00 pm (Snack Provided)• Tuesday – 7:30 am – 8:00 am (Breakfast Provided)
Poster Presenters should attend the orientation each day that they are scheduled to provide a poster presen-tation; you may only attend on days on which you are scheduled to present.
Poster Presenters
Poster Presentation ScheduleTuesdayExhibit Hall A
Poster Session I ........Monday, September 16, 5:00 pm – 6:30 pmPoster Session II ...Tuesday, September 17, 10:00 am – 11:30 amPoster Session III ......Tuesday, September 17, 3:30 pm – 5:00 pm
Posters will be on display on Monday and Tuesday in Exhibit Hall A at the Colorado Convention Center. The poster presenters
2013 IEEE Energy Conversion Congress & Exposition® • 27
Committee Meetings
IAS Industrial Power Conversion Systems DepartmentSunday, September 157:00 pm – 8:00 pmRoom: 201
IAS Industrial Drives Committee and PELS Technical Committee on Motor Drives and ActuatorsMonday, September 166:00 pm – 7:00 pmRoom: 201
IAS Industrial Power Converter CommitteeMonday, September 167:00 pm – 8:00 pmRoom: 203
IAS Transportation Systems Committee and PELS TechnicalCommittee on Vehicle and Transportation SystemsTuesday, September 1710:00 am – 12:00 pmRoom: 710
ECCE Steering Committee (America)Wednesday, September 1812:00 pm – 2:00 pmRoom: 710
All of the following meetings will be held at the Colorado Convention Center (except where otherwise noted).
IAS and IAS/PELS Joint Committee Meetings
IAS PEDCCTuesday, September 175:00 pm – 6:00 pmRoom: 201
IAS Electric Machines CommitteeTuesday, September 175:00 pm – 6:00 pmRoom: 203
IAS Renewable Energy Systems CommitteeTuesday, September 176:00 pm – 7:00 pmRoom: 205
2013/2014/2015 ECCE Organizing CommitteesWednesday, September 1810:00 am – 12:00 pmRoom: 710
ECCE Steering Committee America and PELS Meetings Committee Lunch(Committee Members Only — Companions Welcome)Wednesday, September 1811:30 am – 1:30 pmRoom: 708
ECCE Committee Meetings
PELS Committee Meetings
PELS Magazine Editorial BoardSunday, September 1512:00 pm – 3:00 pmRoom: 206
PELS Bylaws CommitteeSunday, September 152:00 pm – 4:00 pmRoom: 208
PELS Industry Advisory Committee Sunday, September 153:00 pm – 6:00 pmRoom: 207
PELS Technical Committee and Standing Committee ChairsMonday, September 1612:00 pm – 1:30 pmRoom: 206
PELS Southern Conference Steering CommitteeTuesday, September 179:00 am – 10:00 amRoom: 208
PELS Technical Committee on Vehicle and TransportationSystems and IAS Transportation Systems CommitteeTuesday, September 1711:00 am – 12:00 pmRoom: 710
PELS TC7 Communication Energy Systems (INTELEC) IEC Board Meeting (Committee Members Only) Tuesday, September 1711:00 am – 3:00 pmRoom: 207
28 • 2013 IEEE Energy Conversion Congress & Exposition®
Committee Meetings
PELS TC6 on High Performance and Emerging Technologies Technical CommitteeTuesday, September 1712:00 pm – 1:30 pmRoom: 208
PELS TC1 on Power and Control Core Technologies Technical CommitteeTuesday, September 1712:00 pm – 2:00 pmRoom: 206
PELS TC2 Power Conversion Systems and Components Technical CommitteeTuesday, September 172:00 pm – 3:30 pmRoom: 208
PELS Standards CommitteeTuesday, September 173:30 pm – 5:00 pmRoom: 208
PELS TC7 Communication Energy Systems Technical Committee (INTELEC) Tuesday, September 174:00 pm – 5:00 pmRoom: 206
Solar Splash WorkshopTuesday, September 175:30 pm – 6:30 pm Room: 108
PELS TC5 Sustainable Energy Technical CommitteeTuesday, September 176:30 pm – 7:30 pm Room: 206
PELS EXEC TeamWednesday, September 187:30 am – 9:00 amRoom: 208
PELS JESTPE Editorial BoardWednesday, September 188:00 am – 10:00 amRoom: 710
PELS Fincom (Committee Members Only)Wednesday, September 189:00 am – 10:00 amRoom: 208
Awards Committee including NominationsWednesday, September 189:00 am – 10:30 amRoom: 206
PELS Women in Engineering Breakfast (PELS WiE) Wednesday, September 189:00 am – 11:00 amRoom: HYATT REGENCYSpeaker: Karen Butler-Purry, Professor, Associate Provost for Graduate Studies, Assistant Director, Power System Automation Laboratory
PELS/ECCE Global Partnership (Committee Members Only)Wednesday, September 1810:00 am – 11:00 am Room: 208
IEEE Transactions on Power Electronics Editorial BoardWednesday, September 1811:30 am – 1:30 pmRoom: 206
PELS Meetings Committee and ECCE Steering Committee America Lunch (Committee Members Only) Companions Welcome Wednesday, September 1811:30 pm – 1:30 pmRoom: 708
PELS Nominations Committee(Committee Members Only)Wednesday, September 1812:00 pm – 2:00 pmRoom: 208
PELS Meetings CommitteeWednesday, September 182:00 pm – 5:00 pmRoom: 710
PELS Membership Committee:Students/ Liaisons & Chapter Chairs Wednesday, September 183:00 pm – 4:30 pmRoom: 206
PELS Education Committee MeetingThursday Sept 19, 2013 9:40 am – 11:00 am Room: 208
PELS Operations & Products CommitteeThursday, September 192:00 pm – 6:00 pmRoom: 710
Dinner AdCom (Committee Members Only)Thursday, September 196:30 pm – 11:00 pmRoom: OFFSITE
PELS Administrative CommitteeFriday, September 198:00 am – 3:00 pmRoom: HYATT REGENCY
PELS Committee Meetings (Continued)
2013 IEEE Energy Conversion Congress & Exposition® • 29
Colorado Convention Center Floor Plans
Colorado Convention Center
Meeting Room Level
30 • 2013 IEEE Energy Conversion Congress & Exposition®
Downtown Denver Map 2013 IEEE Energy Conversion Congress & Exposition® • 31
Monday, September 16 8:00 am – 10:00 am
Mile High Ballroom
The distinguished plenary speakers were invited this year to share their insights on the future of energy conversion, with a special emphasis on sustainable innovations and integrated systems. This diverse mix of thought leaders and innovators plan to set the tone for this year’s conference with a plenary session that will be engaging for attendees. The organizing committee is pleased to welcome each of these speakers and offers warm appreciation for their contribution to the success of the conference.
Sam BaldwinDr. Baldwin is a PhD. Physicist and cur-rently serves as the Chief Science Offi cer for the Offi ce of Energy Effi ciency and Re-newable Energy at the U.S. Department of Energy (DOE). In previous positions he has served with the White House Offi ce of Science and Technology Policy (OSTP), the National Renewable Energy Labora-tory, the Congressional Offi ce of Technol-
ogy Assessment (OTA), Princeton University, the U.S. Senate, and elsewhere. Dr. Baldwin is the author or co-author of nine books and monographs at OSTP, OTA, DOE, and elsewhere, and more than 30 papers and technical reports on energy technol-ogy and policy, physics, and other issues. He is a Fellow of the American Association for the Advancement of Science. Dr. Baldwin will address Renewable Electricity Futures: Opportuni-ties and Challenges.
Benjamin KroposkiDr. Kroposki is the Director of Energy Sys-tems Integration at the National Renew-able Energy Laboratory (NREL). At NREL he leads NREL’s strategic research in the design and performance optimization of electrical, thermal, and fuel pathways for energy systems at all scales. He received his BS and MS in Electrical Engineering from Virginia Tech and PhD in Engineer-
ing Systems from the Colorado School of Mines. His expertise is in the design and testing of renewable and distributed power systems and grid integration. He has written more than 100 pub-lications in these areas and is the guest editor for IEEE Power & Energy Magazine special issues on solar energy integration. Dr. Kroposki is also an Editor for both the IEEE Transactions on Sustainable Energy and IEEE PV Journal. Dr. Kroposki also par-ticipates in the development of distributed power and renew-able standards and codes and served as the Chairman for IEEE 1547.4 “Guide for Design, Operation, and Integration of Distrib-uted Resource Island Systems with Electric Power Systems”.
James LyonsDr. Lyons entered the venture capital business in 2008 after a 30-year technol-ogy career at General Electric. Jim cur-rently serves as chief technologist for the venture investment teams at both the Capricorn Investment Group and Novus Energy Partners focused on the creation and growth of clean/renewable energy companies. Formerly, Jim was Chief En-
gineer for Electrical Technologies at GE Research serving as technology leader and mentor for a 250-member global team. He was a leading advocate for renewables within GE and cor-porate champion behind the formation of GE Wind Energy in 2002 - subsequently serving as chief technologist for the wind business, which quickly grew to annual revenues of $8B. Dr. Ly-ons was also the technology leader behind the creation of GE’s Digital Energy business unit in 2000. While at GE, Jim served on the board of directors of Powerex, the Electric Drive Trade Association, and the US Offshore Wind Collaborative as well as becoming a principal company spokesperson for renew-able energy. In 2006, Jim was co-chair of the American Wind Energy Conference, initiating the AWEA/DOE 20% wind energy roadmap. Dr. Lyons has led new business initiatives on waste gasifi cation, electric vehicles, advanced batteries, solid-state lighting, solar PV, and rural electrifi cation. During his GE chief engineer tenure Jim led many technology due diligence inves-tigations and has most recently led technology investigations in silicon metal, high effi ciency PV, quantum dots, nanowires, and energy storage. Dr. Lyons is currently a reviewer for the National Science Foundation - serves on the boards of Encell Technologies and Boulder Windpower. He holds 40 patents and a BSEE degree from RPI, an MSEE from Virginia Tech, and a Ph.D. from Cornell University.
Ramón GuitartRamón Guitart holds a BSEE from the University of Wisconsin at Milwaukee, and a Master of Science in Engineer-ing Sciences from Marshall University in Huntington, West Virginia. Mr. Guitart has over 25 years of experience in rotating machinery. He has held engineering posi-tions in well-known companies like West-inghouse Electric Corporation, Rockwell
Automation, Trane, General Electric, and Converteam. Ramon currently manages the Research and Development Department of Round Rock, TX based TECO-Westinghouse Motor Company where he is directing research of High Temperature Supercon-ductivity based electric machines. His areas of interest also include high density cooling techniques, renewable power gen-eration, and systems integration.
Plenary Session32 • 2013 IEEE Energy Conversion Congress & Exposition®
Townhall Meetings
Tuesday, September 17 7:30 pm – 9:00 pm
There will be two Townhall meetings (formerly Rap Sessions) this year at ECCE for attendees to engage in debate concerning critical issues in the state of the art and emerging technologies. These sessions will be different in structure from the previous “Rap Sessions” in that the sessions are designed to be more interactive than just another oral session with formalized pre-sentations. The format is much more informal in order to put the attendees at ease so that open discussion and engage-ment with expert panelists fl ourishes. The meetings will be led by a moderator in order to keep the meandering digressions to a minimum, yet also to stimulate and promote innovative tan-gents. Participants are strongly encouraged to contribute to the debate, discussion, and discourse surrounding the selected topics. We are hoping for honest debate about the topics in a passionate and intelligent way.
The two sessions this year will focus on renewable energy and converter design technologies.
Townhall: Renewable Energy Technologies
Room: 110/112
Renewable energy is vital for society to become independent from fossil fuels and many technologies have been proposed and developed to meet this desire. However there are chal-lenges and uncertainties to be overcome. This meeting will fo-cus on the latest technologies, policies and future of renewable energy.
ModeratorSudipta Chakraborty, NREL, USA
PanelistsFrede Blaabjerg, Aalborg University, DenmarkMarcelo Simoes, Colorado School of Mines, USAAnnabelle Pratt, Intel, USADezso Sera, Aalborg University, DenmarkDaniel M. Saban, Halliburton, USA
Townhall: Emerging Converter Design Technologies
Room: 107/109
Power electronics are an enabling technology for almost ev-ery modern electrical system from the smart grid to consumer electronics. One reason for the success and implementation of power electrics is there ever increasing effi ciency, perfor-mance and reliability. This meeting will focus on current trends and the state of the art in power electronic converter design technologies.
ModeratorPetar J. Grbovic, Huawei Technologies, Germany
PanelistsJohhan W. Kolar, Eidgenossische Technische Hochschule, SwitzerlandThierry Meynard, CNRS, FranceMartin Schulz, Infi neon Technologies, GermanyRobert (Bob) White, Embedded Power Labs, USATobias Geyer, ABB Corporate Research, USA
´
2013 IEEE Energy Conversion Congress & Exposition® • 33
Tutorials
Sunday, September 15 8:00 am – 12:00 pm
Morning Sessions
T1-1 Stability of Power Conversion Systems
Room: 103/105
Instructors: Pierre Magne, Babak Nahid-Mobarakeh, Serge Pierfederici, University of Lorraine, France
On-board energy management in small optimized grids is an important issue in the next generation of electrified transportation systems. On one hand, design engineers are looking for minimizing the size and the weight of power systems and the passive components (inductors and capacitors) are a part of the first elements that should be reduced. On the other hand, it is known that unstable oscillations on the grid may appear under overload conditions when small capacitances are used. This tutorial focuses at first on the stability analysis of interconnected power converters in a microgrid. Linear and nonlinear tools will be presented and applied to a DC microgrid developed for an aeronautic application. This practical example allows attendees to derive the relationship between the stability (small and large signal) and the passive components of the system. Then, the same microgrid will be stabilized using passive and active stabilizers. Attendees will design first a passive stabilizer, then an active one. Discussions on how each stabilizer improves the stability margins of the system will conclude the tutorial.
T1-2 Advanced Power Semiconductors: Art of Control, From Theory to Practice
Room: 104/106
Instructor: Dr. Petar J. Grbovic, HUAWEI Technologies Dusseldorf GmbH, Germany
The gate driver is a key element that links power semiconductor switches and control system of a power converter. Main functions of a gate driver are: 1) to control state of the power semiconductor switch, 2) to optimize transition from one state to another (conducting to blocking and blocking to conducting state), and 3) to protect the semiconductor switch and entire converter in a case of an unexpected event. In this tutorial we will learn what “the art of control of advanced semiconductor switches” is. We will learn how an advanced semiconductor switch has to be driven in order to achieve maximum performance of the device and how the device as well as entire power converter can be protected. This tutorial is aimed at power electronics engineers who want to improve their knowledge and understanding of art of driving advanced power semiconductor switches and their application in power conversion, nowadays as well as in the near future. Also, the tutorial can be recommended as literature for graduate and PhD students.
T1-3 Model Predictive Control of Industrial Drives
Room: 108
Instructors: Tobias Geyer, Nikolaos Oikonomou, ABB Corporate Research, Switzerland
In recent years, model predictive control (MPC) for power electronics and drives has become a very popular research topic. However, the majority of MPC schemes proposed so far tend to be of a simplistic nature and of limited applicability to industrial and high power electrical drives. Bridging this gap, this tutorial focuses on high-performance MPC schemes that have been developed, implemented and tested for industrial MW drives. These MPC schemes combine the very fast transient response times of deadbeat controllers with the superior steady-state performance of optimized pulse patterns. The main emphasis of this tutorial is on the development of MPC algorithms for cases, where the absence of a modulator and hence the use of discrete-valued control variables (the switch positions) together with the need to reduce the converter switching frequency (losses) necessitates the use of very long prediction horizons and the development of tailored control problem formulations and solution algorithms. The key benefit of these approaches is that the control and modulation problem is addressed in one computational stage. As a result, the current harmonic distortions and the switching losses can be reduced simultaneously, when compared to carrier-based PWM. Indeed, at low switching frequencies, the resulting steady-state behaviour is similar to the one obtained by optimized pulse patterns. During transients, however, very fast current and torque response times are achieved, similar to deadbeat control.
T1-4 Testing and Diagnostics of Induction Machines in an Industrial Environment
Room: 107/109
Instructors: Sang Bin Lee, Ernesto Wiedbrig, Karim Younsi, Korea University, Korea (South), Wiedenbrug LLC, USA, General Electric Global Research Center, USA
The goal of this tutorial is to offer valuable information about the diagnostic reality in industry. The target audience is practicing research and development engineers in the area of reliability, diagnostics and prognostics for electrical machines in industrial environments. The wide gap between the predictive maintenance professional’s situation, and methods deemed suitable in a research laboratory will become apparent, opening to candid discussions during this tutorial. Researchers will benefit by being able to target their future work to the needs of industry, thus raising the odds for their research growing into commercially available solutions. The tutorial covers electrical diagnostic techniques used in the field, putting them into perspective with non-electrical diagnostic methods also being used.
Note: All tutorials are held on September 15, 2013. Pre-registration for each tutorial is required. Please visit the Registration Desk for space availability.
34 • 2013 IEEE Energy Conversion Congress & Exposition®
T1-5 Switched Reluctance Machines —Design and Control
Room: 110/112
Instructors: Iqbal Husain, Yilmaz Sozer, David Torrey, NC State University, USA, University of Akron, USA, GE Global Research, USA
The switched-reluctance machine (SRM) has intrigued the electric machines community for over thirty years. The SRM possesses a few unique features that make it a strong competitor to induction and PM motor drives in various adjustable speed drive and servo applications including traction. The primary advantages are low construction costs and energy efficiency, and high fault tolerance. The maximum permissible rotor temperature is higher, since there are no permanent magnets (in PM machines) or windings (in induction machines) on the rotor. Lower rotor losses make thermal management relatively easier in SRMs. The SRM has not penetrated many markets due to the lack of technical know-how in the industry, higher electronics cost and targeting the wrong applications. The electronics requirement for the SRM is slightly more than that of induction and PM motor drives, but that cost has dramatically come down over the years. Thus, comparing motor costs became imperative for the industry in recent years. The uncertainty with rare earth magnet material imports can be eliminated with SRMs. There are several niche applications where SRMs are being used such as mining equipment, portable generators, starter-generators etc. SRM is demonstrating value in applications that take advantage of the inherent ability of the SRM to support a broad constant power speed range; traction drives are a specific example. The tutorial plans to cover the fundamentals of the SRM along with practical examples of machine and controller designs. Topics to be covered include: SRM Basics; SRM Design; Drive Technology; Control and Applications.
T1-6 Dynamic Modeling of Renewable Energy Generator and Power Plant
Room: 111/113
Instructors: Ed Muljadi, Vahan Gevorgian, Mohit Singh, YC Zhang, Longya Xu, NREL, USA, OSU, USA
This tutorial will cover the challenges and methods of dynamic modeling of single renewable energy generators and whole renewable energy plants (wind power plants, large PV arrays). Also, modeling aspects of other auxiliary systems (FACTS, protection, etc.) and energy storage will be covered as well. Another modeling area included into the tutorial is related to dynamic aspects of offshore wind integration. The deployment of offshore wind power plants requires power transmission from the plant to the load center inland. Some modeling aspects of AC and DC transmission options will be discussed during this tutorial.
Sunday, September 15 1:00 pm – 5:00 pm
Afternoon Sessions
T2-1 Matrix Converters: Implementationand Industrial Applications
Room: 103/105
Instructors: Dr. Liliana de Lillo, Dr. Lee Empringham, University of Nottingham, United Kingdom
The challenges and practical implementation of a matrix converter considering three input and three output applications are addressed together with its control. The contribution of guest speakers, from both academia and especially representatives from industry involved in the advancement of matrix converter technology will offer a comprehensive view on this topology of power converters with the intent of highlighting how most of the hardware and control issues in a real matrix converter implementation have been overcome leading to real-world products and prototypes, already available on the market. Also with the advancement of SiC devices together with improved availability, have enabled exploration of new power density challenges for this technology which has the inherent feature of being more compact than a DC-link inverter.
T2-2 Characteristics and Applicationof IGBT Power Modules
Room: 104/106
Instructors: John Donlon, Eric Motto, Nick Clark, Bill Kephart, Powerex, Inc., USA
Information provided on IGBT module data sheets varies considerably between manufacturers and can leave the designer with many questions regarding device selection. Issues the designer must deal with include interpretation of device ratings, gate drive requirements, and providing device and system protection. The intent of this tutorial is to aid the designer in applying an IGBT to a new product. Questions and concerns a designer might have will be addressed by the various techniques and circuit examples that will be presented. IGBT chip technology and device packaging options will also be discussed. The attendee should leave the course with a better understanding of the IGBT, both specifically as a device and how it functions in an application. The goal will be to impart an understanding of the features, characteristics, and limitations of the IGBT power module and how to ensure a successful application. This will include the application of IGBTs in power circuits, protecting the IGBT from internal and external disturbances, and an understanding of thermal design, handling, and reliability considerations. The tutorial is intended for design engineers new to IGBTs as the main switch in power conversion equipment as well as refresher for the experienced designer with questions about confusing or conflicting information on the data sheets from various manufacturers.
Tutorials 2013 IEEE Energy Conversion Congress & Exposition® • 35
T2-3 Power Electronics Solutions for Electricand Plug-in Hybrid Electric Vehicle Battery Charging and Energy Management
Room: 108
Instructor: Sheldon S. Williamson, Concordia University, Canada
This tutorial will initially review some current as well as futuristic charging methodologies for EV/PHEV batteries and energy storage systems. The presentation will discuss the modeling, sizing, design, and implementation of a high-efficiency, single-stage, PV/grid based charging infrastructure for EVs/PHEVs. This tutorial will be useful for engineers and managers with entry-level and/or medium-level knowledge of power electronics and motor drives. The talk would also be suitable for engineers with entry-level knowledge of power electronics and motor drives applications towards energy storage systems, electric vehicles, and renewable energy systems.
T2-4 The Role of Thermal Simulation in Electric Machine Optimization
Room: 107/109
Instructor: Dr. David Staton, Motor Design Ltd, United Kingdom
The objective of this course is to explain the different methods available for modelling heat transfer, flow and losses in electric machines. The course also gives an overview of the benefits and limitations of the different cooling types available. The tutorial is divided into 3 sections. Section 1 examines the need for thermal analysis to optimize the design, maximize efficiency and/or motor life, minimize weight or ensure a motor is sized correctly for its intended load duty. The first section also highlights and compares the different analytical and numerical methods used in thermal analysis. Section 2 covers the key issues in electric machine thermal simulations, such as conduction, convection and radiation, loss prediction, winding heat transfer and temperature rise and interface thermal resistances. Section 3 shows how thermal analysis has been used to optimize electric machine designs for automotive, aerospace and industrial applications.
T2-5 Permanent Magnet Fundamentals
Room: 110/112
Instructor: Dr. Stan Trout, Spontaneous Materials, USA
Starting with the things we learned in the first grade, this seminar will present the basics of permanent magnets and magnetic materials more broadly. Attendees will understand the definitions and arcane units of magnetism. They will learn how magnets are processed, magnetized, characterized and affected by temperature. This small investment of your time will increase your magnet “IQ” and make the technology easier to navigate.
T2-6 Photovoltaic Panels: Technology, Modelingand Characterisation
Room: 111/113
Instructor: Dezso Sera, Aalborg University, Denmark
The objective of this tutorial is to offer a comprehensive review of essential aspects involved in the design and exploitation of modern PV power plants. A review of PV panels’ technology will offer a vision of the PV technology currently installed by integrators, as well new trends. Modeling and characterization of PV panels and arrays will also be presented. PV inverters will be presented by describing both their hardware and control structures. A special attention will be paid to the control system of grid-interactive PV power plants. The synchronous power control concept will be presented as an effective solution to integrate PV power plants in distributed power systems. Design of PV plants, including design optimizations will also be covered. Finally, the methodology for defining a PV plant business model, considering the influence of both technical and financial factors, will be presented.
Tutorials36 • 2013 IEEE Energy Conversion Congress & Exposition®
2013 IEEE Energy Conversion Congress & Exposition® • 37Technical Program Schedule | Oral Sessions
Monday, September 16 10:20 am – 12:00 pm
S1 Marine and Aerospace Systems
Room: 102Chair: Pierluigi Tenca
10:20 am • Performance Evaluation of 3-phase Buck-type PWM Rectifiers with Integrated and Symmetrical Boost Converter Using SIC Mosfets for Aircraft ApplicationsAndrew Trentin, Pericle Zanchetta, Patrick Wheeler and Jon Clare,The University of Nottingham, United Kingdom; University of Nottingham, United Kingdom
10:45 am • Medium Voltage Current Source Converter Drives for Marine Propulsion System using a Dual-winding Synchronous MachineJingya Dai, Sang Woo Nam, Manish Pande and Ghodrat Esmaeili, Rockwell Automation, Canada
11:10 am • Consideration of Active-front-end Rectifier for Electric Propulsion Navy ShipSo-Yeon Kim, Byung-Geuk Cho and Seung-Ki Sul, Seoul National University, Korea (South)
11:35 am • Time-delay Effects in a HIL Aircraft Power System EmulatorChengwei Gan, Rebecca Todd and Judith Apsley, The University of Manchester, United Kingdom
S2 Renewable Energy Storage
Room: 104/106Chair: Behrooz Mirafzal
10:20 am • New Control Strategy for Bidirectional LLC Resonant Converter in Energy Storage SystemsTianyang Jiang, Junming Zhang and Yousheng Wang, Zhejiang University, China
10:45 am • Experimental Verification of Flywheel Power Leveling System Oriented to Low Cost and General Purpose UseJun-ichi Itoh, Kenta Tanaka, Soya Matsuo and Noboru Yamada, Nagaoka University of Technology, Japan
11:10 am • Quantitative and Qualitative Evaluation of Flexible Distribution of Energy and Storage ResourcesHussam Khasawneh and Mahesh Illindala, The Ohio State University, United States
11:35 am • Determination of the Optimal Battery Capacity Based on a Life Time Cost Function in Wind FarmCong-Long Nguyen, Tae-Won Chun and Hong-Hee Lee, University of Ulsan, Korea (South)
S3 Operation and Control of DC-grids
Room: 107/109Chair: Terrence Summers
10:20 am • A Generalized Voltage Droop Strategy for Control of Multi-terminal DC GridsKumars Rouzbehi, Arash Miranian, Alvaro Luna and Pedro Rodriguez, UPC, Spain; University of Tehran, Iran
10:45 am • Optimization with System Damping Restoration for Droop Controlled DC-DC ConvertersLexuan Meng, Tomislav Dragicevic, Juan Carlos Vasquez and Josep Maria Guerrero, Aalborg University, Denmark
11:10 am • Design and Verification of Smart and Scalable DC Microgrids for Emerging RegionsP. Achintya Madduri, Javier Rosa, Eric A. Brewer, Seth R. Sanders and Matthew Podolsky, University of California, Berkeley, United States
11:35 am • Using Apparent Resistance for Fault Discrimination in Multi-terminal DC SystemsPietro Cairoli and Roger Dougal, University of South Carolina, United States
S4 Modulation of Multilevel Converters
Room: 108Chair: Luca Zarri
10:20 am • Space Vector Modulation for Cascaded Asymmetrical Multilevel Converters Under Fault ConditionsFernanda Carnielutti, Humberto Pinheiro and Cassiano Rech, Federal University of Santa Maria, Brazil
10:45 am • Phase-shifted Pulse-width-amplitude Modulation for Quasi-Z-source Cascade Multilevel Inverter Based PV Power SystemsYushan Liu, Haitham Abu-Rub, Baoming Ge and Fang Zheng Peng, Beijing Jiaotong University, China; Texas A M University at Qatar, Qatar; Michigan State University, United States
11:10 am • Optimization of the Pulse-width-modulation Strategy for Redundant and Non-redundant Multi-level Cascaded-cell ConvertersMarco Stieneker, Stefan Engel, Hanno Stagge and Rik De Doncker, RWTH Aachen University, Germany
11:35 am • Modeling and Voltage Method for Modular Multilevel ConverterLucas Mondardo Cunico, Yales Rômulo de Novaes and Sergio Vidal Garcia Oliveira, Santa Catarina State University, Brazil
S5 Converter Modeling and Control I
Room: 110/112Chair: Liming Liu
10:20 am • V2 Control with Capacitor Current Ramp Compensation using Lossless Capacitor Current SensingYingyi Yan, Pei-Hsin Liu, Fred Lee, Qiang Li and Shuilin Tian, Virginia Tech, United States
10:45 am • State-machine Realization of Second-order Sliding-mode Control for Synchronous Buck DC-DC ConvertersRui Ling, Dragan Maksimovic and Ramon Leyva, Chongqing University, China; University of Colorado - Boulder, United States; Universitat Rovira i Virgili, Spain
11:10 am • Ripple Minimization in Asymmetric Multiphase Interleaved DC-DC Switching ConvertersMarcel Schuck and Robert C.N. Pilawa-Podgurski, University of Illinois at Urbana-Champaign, United States
11:35 am • Bang-bang Charge Control for LLC Resonant ConvertersZhiyuan Hu, Laili Wang, Yan-Fei Liu and P. C. Sen, Queen’s University, Canada
38 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Oral Sessions
S6 DC-DC Isolated I
Room: 111/113Chair: Dragan Maksimovic
10:20 am • Piezoelectric Transformer-based DC-DC Converter with Improved Burst-mode ControlDejan Vasic, Yuan-Ping Liu, Francois Costa and Denis Schwander, SATIE ENS Cachan, France; CNES, France
10:45 am • Cycle-by-cycle Average Input Current Sensing Method for LLC Resonant TopologiesZhiyuan Hu, Yan-Fei Liu and Paresh Sen, Queen’s University, Canada
11:10 am • Design of an Interleaved Isolated Boost Converter with Coupled Inductors for High Step-up ApplicationsGiorgio Spiazzi and Simone Buso, University of Padova, Italy
11:35 am • A Series-input Forward Converter with Shared RCD Cell for High-reliability and Wide Input Voltage Range ApplicationsXiaoqing Qin, Haibing Hu, Hongfei Wu, Yan Xing and Xudong Ma, Nanjing University of Aeronautics and Astronautics, China; Southeast University, China
SS1 Special Session: Products and Service Session I
Room: 201Chair: Craig Winterhalter
10:20 am • Dy-free Rare Earth MagnetsNimit Sheth, Molycorp Magnequench, United States
10:45 am • ASIC Based Current TransducersEric Lange, LEM USA, Inc., United States
11:10 am • 450 MVA GCT-STATCOM for Stability Improvement and Over-voltage SuppressionToshiyuki Fuji, Mitsubishi Electric Corporation, Japan
11:35 am • Overview of a Family Power Stack Development ProcessIgor Larrazabal, Ingeteam Power Technology, Spain
S7 Drive Control Topics in Transportation Applications
Room: 203Chair: Lei Hao
10:20 am • An Accurate Torque Control of Permanent Magnet Brushless Motor Using Low-resolution Hall-effect Sensors for Light Electric Vehicle ApplicationsMing-Shi Huang, Chin-Hao Chen, Hsin-Hung Chou, Guen-Zheng Chen and Wen-Ko Tsai, NTUT, Taiwan
10:45 am • Dynamic DC-link Voltage Adaptation for Thermal Management of Traction DrivesJoris Lemmens, Johan Driesen and Piet Vanassche, KU Leuven, Belgium; Triphase NV, Belgium
11:10 am • Suppression Method of Rising DC Voltage for the Halt Sequence of an Inverter in the Motor RegenerationJun-ichi Itoh, Wataru Aoki, Teck Chiang Goh and Akio Toba, Nagaoka University of Technology, Japan; Fuji Electric Co. Ltd, Japan
11:35 am • Impact of Position Sensor Accuracy on the Performance of IPM DrivesLei Hao, Suresh Gopalakrishnan, Chandra Namuduri and Khwaha Rahman, General Motors, United States
S8 Grid Integration of Wind Energy
Room: 205Chair: Lixiang Wei
10:20 am • Medium Voltage Inverter to Establish Grid Interface and Provide Ancillary Support for DC Distributed Wind FarmsYogesh Patel and Adel Nasiri, Rockwell Automation, United States; University of Wisconsin - Milwaukee, United States
10:45 am • Resonance Issues and Active Damping in HVAC Grid-connected Offshore Wind FarmShuai Jiang, Shao Zhang, Xi Lu, Baoming Ge and Fang Zheng Peng, Michigan State University, United States
11:10 am • Hybrid Control Strategy for a Doubly Fed Induction Generator in Medium Voltage Wind Power System under Unbalanced Grid ConditionsDaesu Han, Yonggyun Park and Yongsug Suh, Chonbuk National University, Korea (South)
11:35 am • Analysis, Design, and Implementation of Multi-function Interfaced Inverters for Distributed GenerationZhixiang Zou, Zheng Wang and Ming Cheng, Southeast University, China
S9 Jimmie J. Cathey Memorial Session:Induction Machines
Room: 207Chairs: Uday Deshpande, Emmanuel Agamloh
10:20 am • Efficiency Determination of Converter-Fed Induction Motors: Waiting for the IEC 60034-2-3 StandardAldo Boglietti, Andrea Cavagnino, Marco Cossale, Alberto Tenconi and Silvio Vaschetto, Politecnico di Torino, Italy
10:45 am • A Grid-connected Induction Machine Capable of Operation at Unity and Leading Power FactorAndrew Knight, John Salmon, Reaz ul Haque, Nirmans Perera and Mohammad Sedigh Toulabi, University of Alberta, Canada
11:10 am • Analysis of Pulsating Torque in Squirrel Cage Induction Machines by Investigating Stator Slot and Rotor Bar Dimensions for Traction ApplicationsYingjie Li, Silong Li and Bulent Sarlioglu, Wempec, University of Wisconsin-Madison, United States
11:35 am • Finite Element Analysis of End Ring Impedance in Squirrel Cage Induction MachinesDmitry Svechkarenko, Wenliang Chen, Yujing Liu and Olli Liukkonen, ABB Corporate Research Center, Sweden; Chalmers University of Technology, Sweden; ABB Oy, Finland
S10 Power Electronic Modules I
Room: 210/212Chair: Jean-Luc Schanen
10:20 am • Characterization of 4.5 kV/2.4 kA Press Pack IGBT Including Comparison with IGCTRodrigo Alvarez, Felipe Filsecker, Martin Buschendorf and Steffen Bernet, Dresden University of Technology, Germany
10:45 am • A Novel IGBT Package to Reduce Current Imbalance with Pinfin BaseplateYulin Zhong, Xuhui Wen, Wei Sun, Wei Su and Jinlei Meng, CAS, China
2013 IEEE Energy Conversion Congress & Exposition® • 39Technical Program Schedule | Oral Sessions
11:10 am • Device Characterization and Performance of 1200V/45A SiC JFETVinay Baliga, Samir Hazra, Shikhar Singh, Sudhin Roy, Subhashish Bhattacharya, Joseph Paulakonis and Shailesh Notani, North Carolina State University, United States; Eaton Corporation, United States
11:35 am • Simple Spice Based Modeling Platform for 4.5 kV Power IGBT ModulesMuhammad Nawaz, Filippo Chimento, Niccollo’ Mora and Massimo Zannoni, ABB Corporate Research, Sweden; University of Parma, Italy
Monday, September 16 1:30 pm – 3:35 pm
S11 Battery and Battery Management
Room: 102Chair: Chris Mi
1:30 pm • Cell Balancing Control Using Adjusted Filters in Flyback Converter with Single SwitchJin-Woong Kim, Jong-Won Shin and Jung-Ik Ha, Seoul National University, Korea (South)
1:55 pm • Online SOC and SOH Estimation for Multicell Lithium-ion Batteries Based on an Adaptive Hybrid Battery Model and Sliding-mode ObserverTaesic Kim, Wei Qiao and Liyan Qu, University of Nebraska-Lincoln, United States
2:20 pm • Design Considerations for Hybrid Battery/Supercapactior Systems for Pulsed PowerAnton Steyerl, Steven Bastien and Raymond Sepe, Electro Standards Laboratories, United States
2:45 pm • On-line Adaptive Tuning of a Lithium-Ion Battery Cell State of Charge ObserverLaurent Gagneur, Christophe Forgez and Ana Lucia Driemeyer Franco, Université de Technologie de Compiègne-Renault, France; Université de Technologie de Compiègne, France; Renault, France
3:10 pm • Effects of Pulse and DC Charging on Lithium Iron Phosphate (LiFePO4) BatteriesHui Zhi (Zak) Beh, Grant Covic and John Boys, University of Auckland, New Zealand
S12 Wave Energy Technology
Room: 104/106Chair: Yilmaz Sozer
1:30 pm • Adaptive Damping Power Take-off Control for a Three-body Wave Energy ConverterZhe Zhang, Ted Brekken, Ken Rhinefrank, Al Schacher, Joe Prudell, Erik Hammagren and Pukha Lenee-Bluhm, Oregon State University, United States; Columbia Power Technologies, Inc., United States
1:55 pm • Modeling of a Two-body Wave Energy Converter Driven by Spectral JONSWAP WavesTimothy Lewis, Bret Bosma, Annette von Jouanne and Ted Brekken, Oregon State University, United States
2:20 pm • Experimental Testing and Model Validation for Ocean Wave Energy Harvesting BuoysDouglas Gemme, Steven Bastien, Raymond Sepe, John Montgomery, Stephan Grilli and Annette Grilli, Electro Standards Laboratories, United States; University of Rhode Island, United States
2:45 pm • Power Converter and Control System Developed in the Ocean Sentinel Instrumentation Buoy for Testing Wave Energy ConvertersTerry Lettenmaier, Ean Amon and Annette von Jouanne, Oregon State University, United States
3:10 pm • Medium-voltage Power Converter Interface for Wave Dragon Wave Energy Conversion SystemNicolas Muller, Samir Kouro, Mariusz Malinowski and Jaime Glaria, Universidad Tecnica Federico Santa Maria, Chile; Warsaw University of Technology, Poland
S13 Modular Topologies for Solid-State Transformers
Room: 107/109Chair: Pericle Zanchetta
1:30 pm • Optimum Number of Cascaded Cells for High-Power Medium-voltage Multilevel ConvertersJonas Huber and Johann Kolar, ETH Zurich, Switzerland
1:55 pm • A Modular Multilevel Converter-based Power Electronic TransformerAli Shojaei and Geza Joos, McGill University, Canada
2:20 pm • A Cost Effective Power Sharing Strategy for a Cascaded Multilevel Converter Based Solid State TransformerXu She, Alex Huang and Xijun Ni, North Carolina State University, United States
2:45 pm • Review of Modular Power Converters Solutions for Smart Transformer in Distribution SystemRafael Pena-Alzola, Ghanshyamsinh Gohil, Laszlo Mathe, Marco Liserre and Frede Blaabjerg, Aalborg University, Denmark
3:10 pm • Power Flow Analysis for 3-port 3-phase Dual Active Bridge DC-DC Converter and Design Validation Using High Frequency Planar TransformerSeunghun Baek, Sungmin Kim, Sudhin Roy and Subhashish Bhattacharya, North Carlina State University, United States; Seoul National University, Korea (South)
S14 Control of Multilevel Converters I
Room: 108Chair: Stefano Bifaretti
1:30 pm • Analysis and Operation of Modular Multilevel Converters with Phase-shifted Carrier PWMKalle Ilves, Lennart Harnefors, Staffan Norrga and Hans-Peter Nee, KTH Royal Institute of Technology, Sweden
1:55 pm • Decoupled Control of a 3-phase to 3-phase Modular Multilevel ConverterDavid Arancibia, Marcelo Perez and Jose Rodriguez, Universidad Tecnica Federico Santa Maria, Chile
2:20 pm • Experimental Verification of Direct Dead-time Control and DC-link Neutral-point Balancing of a Three Level Neutral-point-clamped (3L-NPC) VSCMichael Sprenger, Tobias Barth, Rodrigo Alvarez, Marvin Tannhaeuser and Steffen Bernet, Dresden University of Technology, Germany
40 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Oral Sessions
2:45 pm • Capacitor Balance in a Five-level Based Half-bridge Converter by Use of a Mixed Active-cellEdison R.C. da Silva, Joao H.G. Muniz, Ranoyca N.A. Silva, Euzeli C. dos Santos Jr. and Luiz H. Barreto, Federal University of Campina Grande, Brazil; Universidade Federal do Piaui, Brazil; IUPUI, United States; Universidade Federal do Ceara, Brazil
3:10 pm • Current Control of a Phase-shifted-PWM STATCOM Using the Modular Multilevel Cascade Converter Based on Single-star Bridge-cells (MMCC-SSBC)Joao Inacio Yutaka Ota, Yuji Shibano, Naoto Niimura and Hirofumi Akagi, Tokyo Institute of Technology, Japan; Toshiba Mitsubishi-Electric Industr. Syst. Corp., Japan
S15 Stability and Power Quality
Room: 110/112Chair: Masayoshi Yamamoto
1:30 pm • Optimization of LCL Filter based on THD Estimation ModelXinxin Zheng, Lan Xiao, Xiaoli Meng, Fanghua Zhang and Yangtian Tian, Nanjing University of Aeronautics and Astronautics, China
1:55 pm • Stability Issues of Z+Z or Y+Y Type Cascade SystemLiu Fangcheng, Liu Jinjun, Zhang Haodong, Xue Danhong, Hasan Saad UL and Zhou Linyuan, Xi’an Jiaotong University, China
2:20 pm • Modified Norm Type Stability Criterion for Cascade AC SystemLiu Fangcheng, Liu Jinjun, Zhang Haodong, Xue Danhong, Hasan Saad UL and Zhou Linyuan, Xi’an Jiaotong University, China
2:45 pm • Stability Analysis of Damping Control to Suppress Filter Resonance in Multi-modular Matrix ConverterHiroki Takahashi and Jun-ichi Itoh, Nagaoka University of Technology, Japan
3:10 pm • A Hybrid Damping Method for LLCL-Filter Based Grid-tied Inverter with a Digital Filter and an RC Parallel Passive DamperWeimin Wu, Zhe Lin, Yunjie Sun, Xiongfei Wang, Min Huang, Huai Wang, Frede Blaabjerg and Henry Shu-hung Chung, Shanghai Maritime University, China; Aalborg University, Denmark; City University of Hong Kong, Hong Kong
S16 DC-DC Non-Isolated I
Room: 111/113Chair: Robert Pilawa
1:30 pm • Buck Derived Converters Based on Gallium Nitride Devices for Envelope Tracking ApplicationsPablo Fernandez Miaja, Alberto Rodriguez and Javier Sebastian, University of Oviedo, Spain
1:55 pm • Switching Performance Comparison of the SiC JFET and the SiC JFET/Si MOSFET Cascode ConfigurationAlberto Rodriguez, Marcos Fernandez, Marta M. Hernando, Diego. G. Lamar, Manuel Arias and Javier Sebastian, University of Oviedo, Spain
2:20 pm • Impact of Parasitic Elements on the Spurious Triggering Pulse in Synchronous Buck ConverterJianjing Wang and Henry Shu-hung Chung, City University of Hong Kong, Hong Kong
2:45 pm • High Frequency Synchronous Buck Converter Using GaN-on-SiC HEMTsYuanzhe Zhang, Miguel Rodriguez and Dragan Maksimovic, University of Colorado, United States
3:10 pm • Evaluation of the Lagrangian Method for Deriving Equivalent Circuits of Integrated Magnetic Components: A Case Study Using the Integrated Winding Coupled InductorKazuhiro Umetani, Seikoh Arimura, Tetsuo Hirano, Jun Imaoka, Masayoshi Yamamoto, DENSO Corporation, Japan; Shimane University, Japan
SS2 Special Session: Productsand Service Session II
Room: 201Chair: Adam Skorek
1:30 pm • Transfer Molded IGBT for Hybrid Vehicle with Improved Cycling DurabilityJohn Donlon, Powerex, Inc., United States
1:55 pm • Standard Packages and Features for DIP-IPMs in Small Motor Drive ApplicationsEric Motto, Powerex, Inc., United States
2:20 pm • Cree All-SiC Power Modules Enables Higher Performance Power Conversion Solutions at a Lower System Cost than State-of-the-Art Si IGBT ModulesMrinal Das, Cree, Inc., United States
2:45 pm • All SiC Power Module with Advanced Structure and its Solar Inverter ApplicationEiji Mochizuki, Fuji Electric, Japan
3:10 pm • Boost Inductors, Design for Cost and Loss MinimizationWeyman Lundquist, West Coast Magnetics, USA
S17 Alfio Consoli Memorial Session:High Frequency Injection Sensorless Control
Room: 203Chairs: Thomas Lipo and Guiseppe Scarcella
1:30 pm • Sensorless Control of Doubly-Fed Induction Generators Based on Stator High Frequency Signal InjectionDavid Reigosa, Fernando Briz, Cristian Blanco and Juan Manuel Guerrero, University of Oviedo, Spain
1:55 pm • Arbitrary injection for Permanent Magnet Synchronous machines with multiple SalienciesDirk Paulus, Peter Landsmann, Sascha Kuehl and Ralph Kennel, Technische Universitaet Muenchen, Germany
2:20 pm • A Pulse Injection Based Sensorless Position Estimation Method for a Switched Reluctance Machine over a Wide Speed RangeErnest Ofori, Tausif Husain, Yilmaz Sozer and Iqbal Husain, University of Akron, United States; North Carolina State University, United States
2:45 pm • Initial Rotor Position Detection for Delta-Connected Synchronous Reluctance MotorShaohua Suo, Anton H.C. Smith, Michael Harke, Thomas Flygare and Michael Laursen, Danfoss Power Electronics, United States; Danfoss Power Electronics, Denmark
3:10 pm • Low-Speed Position Sensorless Drive for Highly Efficient Permanent Magnet Synchronous Motor without Rare-Earth MetalsYoshitaka Iwaji, Ryoichi Takahata, Takahiro Suzuki, Hirooki Tokoi and Enomoto Yuji, Hitachi, Ltd., Japan
2013 IEEE Energy Conversion Congress & Exposition® • 41Technical Program Schedule | Oral Sessions
S18 Grid Integration of Solar PV
Room: 205Chair: Josep Guerrero
1:30 pm • Model Predictive Control of Grid-connected Inverters for PV Systems with Flexible Power Regulation and Switching Frequency ReductionJiefeng Hu, Jianguo Zhu and David Dorrell, University of Technology, Sydney, Australia
1:55 pm • A Single-stage Buck-boost 3-level Neutral-point-clamped Inverter for the Grid-tied Photovoltaic Power GenerationFeng Gao, XueFeng Ge and JianBo Wang, Shandong University, China; Wulian Power Supply Company, China
2:20 pm • Mitigating Variability of High Penetration Photovoltaic Systems in a Community Smart Microgrid using Non-flat Photovoltaic ModulesMohammad B. Shadmand and Robert Balog, Texas A and M University, United States
2:45 pm • Grid Impacts and Mitigation Measures for Increased PV Penetration Levels using Advanced PV Inverter RegulationValentina Cecchi, Melanie Miller, Sukumar Kamalasadan and Johan Enslin, The University of North Carolina at Charlotte, United States; Duke Energy, United States
3:10 pm • Controlling of Medium Voltage Power-Factor of Photovoltaic Power Plants from the Low Voltage SideBenjamin Krueger, Sebastian Gruber and Stefan Soter, University of Wuppertal, Germany
S19 IPM Machines for Electric Vehicles
Room: 207Chair: Nicola Bianchi
1:30 pm • A Comparison of IPM Traction Machines with Different PM MaterialsJian Luo, Cheng Zhao, Ronghai Qu, Lingyun Gu and Xiaobo Zhang, Shanghai Zhongke Shengjiang EV Co. Ltd., China; Huazhong University of Science and Technology, China
1:55 pm • Advanced High Power-Density Interior Permanent Magnet Motor for Traction ApplicationsAyman EL-Refaie, James P. Alexander, Steven Galioto, Patel Reddy, Kum-Kang Huh, Peter De Bock and Xiaochun Shen, GE Global Research, United States
2:20 pm • Efficiency Contours and Loss Minimization over a Driving Cycle of a Variable-Flux Flux-Intensifying Interior Permanent Magnet MachineTakashi Fukushige, Natee Limsuwan, Takashi Kato, Kan Akatsu and Robert Lorenz, Nissan Motor Co., Ltd., Japan; University of Wisconsin - Madison, United States; Shibaura Institute of Technology, Japan
2:45 pm • Design and Analysis of IPM Machine with Bar Wound Fractional Slot Distributed Winding for Automotive Traction ApplicationLei Hao, General Motors, United States
3:10 pm • Rotor Structure in 50 kW Spoke-Type Interior Permanent Magnet Synchronous Motor with Ferrite Permanent Magnets for Automotive ApplicationsWataru Kakihara, Masatsugu Takemoto and Satoshi Ogasawara, Hokkaido University, Japan
S20 Magnetic Materials and Design
Room: 210/212Chair: Charlie Sullivan
1:30 pm • Measured Performance and Micro-Fabrication of Racetrack Power InductorsDaniel V. Harburg, Alex J. Hanson, Yue Song, Jizheng Qiu, Rui Tian, Christopher G. Levey, Charles R. Sullivan and David Otten, Thayer School of Engineering at Dartmouth, United States; Massachusetts Institute of Technology, United States
1:55 pm • Laminated Low Temperature Co-fired Ceramic Ferrite Materials and the Applications for High Current POL ConvertersMingkai Mu, Wenli Zhang, Fred Lee and Yipeng Su, Virginia Tech, United States
2:20 pm • Complex Permeability Measurements of Radial-Anisotropy Thin-Film Magnetic Toroidal CoresJizheng Qiu, Haider Syed and Charles Sullivan, Thayer School of Engineering at Dartmouth, United States
2:45 pm • CCTT-Core Split-Winding Integrated Magnetic Interleaved Boost Converter for Renewable Energy ApplicationsKevin Hartnett, John G. Hayes, Michael Egan, Marek Rylko and Jerzy Maslon, UCC, Ireland; Dtw sp z.o.o, Poland
3:10 pm • Leakage Inductance Calculation for Planar Transformers with a Magnetic ShuntJun Zhang, Ziwei Ouyang, M. C. Duffy, M. A. E. Andersen and W. G. Hurley, National University of Ireland, Ireland; Technical University of Denmark, Denmark
Tuesday, September 17 8:00 am – 9:40 am
S21 Electric Drivetrain
Room: 102Chair: Khwaja Rahman
8:00 am • Engine-generator Sizing for Re-engineering an Electric Vehicle into an Extended Range Electric VehicleHari Ambaripeta, Yilmaz Sozer and Iqbal Husain, University of Akron, United States; North Carolina State University, United States
8:25 am • Reluctance Synchronous and Field Intensified-PM Motors for Variable-Gear Electric Vehicle DrivesMichiel H.A. Prins, Chris Vorster and Maarten Kamper, Stellenbosch University, South Africa
8:50 am • Off-Vehicle Evaluation of Active Oscillation Damping SchemesShuang Zhao, Oskar Wallmark, Mats Leksell and Anders Lasson, KTH Royal Institute of Technology, Sweden; Volvo Car Corporation, Sweden
9:15 am • Economic Influence of Prolonging Fuel Cell Stack Lifetime of Fuel Cell Hybrid Vehicles Based on Optimal Control TheoryChunhua Zheng, Guoqing Xu and Yimin Zhou, Shenzhen Key Laboratory of Electric Vehicle Powertrain Platform and Safety Technology, China; Chinese University of Hong Kong, China
42 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Oral Sessions
S22 Energy Storage and PF Control
Room: 104/106Chair: Ted Brekken
8:00 am • Capacity Fade Estimation in Electric Vehicles Lithium-ion Batteries using Artificial Neural NetworksAla Hussein, United Arab Emirates University, United Arab Emirates
8:25 am • Improved Performance of a DC-DC Converter for Supercapacitor Energy Storage SystemWei Jiang, Renjie Hu, Wu Chen and Lan Xiao, Southeast University, China; Nanjing Univ. of Aeronautics and Astronautics, China
8:50 am • Accelerated Lifetime Testing Methodology for Lifetime Estimation of Lithium-ion Batteries Used in Augmented Wind Power PlantsDaniel Stroe, Maciej Swierczynski, Ana-Irina Stan and Remus Teodorescu, Aalborg University, Denmark
9:15 am • Rapid Bidirectional Power Flow of Supercapacitor Energy Storage Systems through Grid-tied Inverters for Improved Renewables IntegrationArne Bostrom, Annette von Jouanne, Ted Brekken and Alex Yokochi, Oregon State University, United States
S23 Design and Active Damping of Filtersfor Grid Converters
Room: 107/109Chair: Fang Zheng Peng
8:00 am • Discrete-time Optimal Active Damping of LCL Resonance in Grid Connected Converters by Proportional Capacitor Current FeedbackMartin Wagner, Tobias Barth, Chester Ditmanson, Rodrigo Alvarez and Steffen Bernet, TU Dresden, Germany
8:25 am • Design of the LCL+Trap Filter for the Two-level VSC Installed in a Large-scale Wave Power PlantAntoni M. Cantarellas, Elyas Rakhshani, Daniel Remon and Pedro Rodriguez, Abengoa Research, Technical University of Catalonia, Spain
8:50 am • LC Filter Design for On-grid and Off-grid Distributed Generating UnitsGiovanni Lo Calzo, Alessandro Lidozzi, Luca Solero and Fabio Crescimbini, University of Roma Tre, Italy
9:15 am • Robust Capacitor-current-feedback Active Damping for the LCL-type Grid-connected InverterDonghua Pan, Xinbo Ruan, Xuehua Wang, Chenlei Bao and Weiwei Li, Huazhong University of Science and Technology, China
S24 Converter Modeling and Control II
Room: 108Chair: Jiangang Hu
8:00 am • Passive Cancellation in a Flyback for Effective CM ReductionJuergen Stahl, Sebastian Wieczorek, Martin Schmidt and Manfred Albach, University Erlangen-Nuremberg, Germany
8:25 am • SLR Converter Design for Multi-cell Battery ChargingAlexander Julian, Giovanna Oriti and Mark Pfender, Naval Postgraduate School, United States
8:50 am • A Stepping On-time Adjustment Method for Interleaving Three-channel Critical Mode Boost PFC ConverterHong-Jyun Chen, Shen-Yang Lee, Yaow-Ming Chen, Yang-Lin Chen and Kwang H. Liu, National Taiwan University of Science and Tech., Taiwan
9:15 am • Symmetrical Tuning for Resonant Controllers in Inverter Based Micro-grid ApplicationsAlessandro Lidozzi, Giovanni Lo Calzo, Luca Solero and Fabio Crescimbini, University of Roma Tre, Italy
S25 3-phase Inverters
Room: 110/112Chair: Radu Bojoi
8:00 am • Harmonic Elimination by Adaptive Phase-shift Optimization in Interleaved ConvertersMark Caris, Henk Huisman and Jorge Duarte, Eindhoven University of Technology, Netherlands
8:25 am • Pulse Width Modulation of 3-phase Switched Boost InverterRavindranath Adda, Avinash Joshi and Santanu Mishra, Indian Institute of Technology Kanpur, India
8:50 am • Dead Time Compensation Method Based on Current Ripple EstimationTomoyuki Mannen and Hideaki Fujita, Tokyo Institute of Technology, Japan
9:15 am • Active Power Control for Minimum Switching of 3-phase Electrolytic Capacitor-less PWM ConverterHojoon Shin, Jung-Ik Ha and Wook-Jin Lee, Seoul National University, Korea (South)
S26 DC-DC Non-Isolated II
Room: 111/113Chair: Brandon Pierquet
8:00 am • Novel High Voltage Conversion Ratio “Rainstick” DC-DC ConvertersMatthias Kasper, Dominik Bortis and Johann Kolar, ETH Zurich, Switzerland
8:25 am • A Hybrid Interleaved/Switched-capacitor Boost ConverterJulio Rosas-Caro, Hilda Torres-Espinosa, Fernando Mancilla-David and Antonio Valderrabano-Gonzalez, Universidad Panamericana Campus Guadalajara, Mexico; Madero City Technological Institute, Mexico; University of Colorado Denver, United States
8:50 am • Multiple Conversion Ratio Resonant Switched-capacitor Converter with Active Zero Current DetectionEli Hamo, Alon Cervera and Mor Mordechai Peretz, Ben Gurion University of the Negev, Israel
9:15 am • The DCM Stability Issue of Voltage Regulators Using a Current-mode Constant On-time Controller ControlGuan-Yu Lin, Dan Chen and Yung-Jen Chen, National Taiwan University, Taiwan; Richtek Technology Corporation, Taiwan
2013 IEEE Energy Conversion Congress & Exposition® • 43Technical Program Schedule | Oral Sessions
S27 High Power Drives
Room: 201Chair: Mahesh Swamy
8:00 am • Design Challenges of Industrial High-power Converters with Low Pulse-ratiosJie Shen, Stefan Schroeder, Hanno Stagge and Rik De Doncker, GE Global Research, Germany; RWTH Aachen University, Germany
8:25 am • Performance Investigation of Hybrid Converter Systems for Mobile Mining ApplicationsHesam Mirzaee, Richard Beddingfield, Babak Parkhideh and Subhashish Bhattacharya, North Carolina State University, United States; University of North Carolina - Charlotte, United States
8:50 am • Test-Bench for Very High Power Variable Frequency Drives Working under Constrained Grid ConditionsStefan Schroeder, Jie Shen, Fan Zhang, Kunlun Chen, Laigui Qin and Richard Zhang, GE Global Research, Germany; GE Power Conversion, China; GE Power Conversion, France
9:15 am • Common-Mode Voltage Reduction for Medium-Voltage Current Source Converters by Optimizing Switching SequencesAnping Hu, Ning Zhu, Dewei Xu, Bin Wu and Jianhui Su, Hefei University of Technology, China; Ryerson University, Canada
S28 Control Issues in Permanent MagnetMotor Drives
Room: 203Chair: Gianmario Pellegrino
8:00 am • High Frequency Injection-based Stator Flux Linkage and Torque Estimation for DB-DTFC Implementation on IPMSMs Considering Cross-Saturation EffectsWei Xu and Robert Lorenz, University of Wisconsin Madison, United States
8:25 am • Variable Flux Machine Torque Estimation and Pulsating Torque Mitigation during Magnetization State ManipulationChen Yen Yu, Takashi Fukushige, Natee Limsuwan, Takashi Kato, David Reigosa and Robert Lorenz, University of Wisconsin-Madison, United States; Nissan Motor Co., Ltd., Japan; University of Oviedo, Spain
8:50 am • Comprehensive PM Motor Controller Design for Electrically Assisted Turbo-charger SystemsSeHwan Kim and Jul-Ki Seok, YeungNam University, Korea (South)
9:15 am • Extended MTPA with Cross Coupling Inductances for Electrically Excited Synchronous MotorsIlsu Jeong, Junwoo Kim, Yoonjae Kim and Kwanghee Nam, POSTECH, Korea (South)
S29 Wind Energy Systems
Room: 205Chair: Dan Ionel
8:00 am • Gearbox and Drivetrain Models to Study Dynamic Effects of Modern Wind TurbinesIrving Girsang, Jaspreet Dhupia, Eduard Muljadi, Mohit Singh and Lucy Pao, Nanyang Technological University, Singapore; National Renewable Energy Laboratory, United States; University of Colorado, Boulder, United States
8:25 am • Design Specifications and Optimisation of a Directly Grid-connected PM Wind GeneratorJohannes Potgieter and Maarten Kamper, Stellenbosch University, South Africa
8:50 am • Simulation Tool to Assess Mechanical and Electrical Stresses on Wind Turbine GeneratorsMohit Singh, Eduard Muljadi, Vahan Gevorgian and Jason Jonkman, National Renewable Energy Laboratory, United States
9:15 am • A New Modular Flux-Switching Permanent Magnet Drive for Large Wind TurbinesChester Ditmanson, Peter Hein, Stefan Kolb, Joaquin Molck and Steffen Bernet, Technische Universitaet Dresden, Germany; Venpower GmbH, Germany; Enasys GmbH, Germany
S30 SR Machines
Room: 207Chair: Akira Chiba
8:00 am • Comparison of Low-cost Wound-field Switched-flux MachinesY.J. Zhou and Zi-Qiang Zhu, University of Sheffield, United Kingdom
8:25 am • Adaptive Flux Weakening Control of Switched Reluctance Machines in Rotating Reference FrameTausif Husain, Ali Elrayyah, Yilmaz Sozer and Iqbal Husain, University of Akron, United States; North Carolina State University, United States
8:50 am • Finite Element Based Analytical Model for Controller Development of Switched Reluctance MachinesRajib Mikail, Iqbal Husain and Mohammad Islam, North Carolina State University, United States; Nexteer Automotive, United States
9:15 am • Design Considerations of Switched Reluctance Motors with Bipolar Excitation for Low Torque Ripple ApplicationsCong Ma and Liyan Qu, University of Nebraska-Lincoln, United States
S31 Wide Bandgap Semiconductors I
Room: 210/212Chair: Filippo Chimento
8:00 am • Modeling of a 1200 V 6 A SiC Bipolar Junction TransistorYizhe Huang, Shidong Cheng, Weicheng Zhou and Kuang Sheng, Zhejiang University, China
8:25 am • Real Field Mission Profile Oriented Design of a SiC-Based PV-Inverter ApplicationNicolae-Cristian Sintamarean, Frede Blaabjerg, Huai Wang and Yongheng Yang, Aalborg University, Denmark
8:50 am • Guidelines for Developing Power Stage Layouts using Normally-Off SiC JFETs Based on Parasitic AnalysisCorris Stewart, Andres Escobar-Mejia and Juan Carlos Balda, University of Arkansas, United States
9:15 am • Comparative Performance Evaluation of SiC Power Devices for High Temperature and High Frequency Matrix ConverterSaeed Safari, Alberto Castellazzi and Patrick Wheeler, University of Nottingham, United Kingdom
44 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Oral Sessions
Wednesday, September 18 8:00 am – 9:40 am
SS3 Special Session: Advances in Wireless Power for Electric Vehicles I
Room: 102Chair: Grant Covic
8:00 am • A Past, Present and Future Perspective on Wireless Power Transfer for Electric VehiclesGrant A. Covic, The University of Auckland, New Zealand
8:25 am • The development and deployment of On-Line Electric Vehicles (OLEV)Chun T. Rim, Korea Advanced Institute of Science and Tech., Korea (South)
8:50 am • A High Performance 50kW Inductive Charger for Electric BusesHunter H. Wu, Utah State University, United States
9:15 am • ORNL Developments in Stationary and Dynamic Wireless ChargingOmer C. Onar, John M. Miller, P.T. Jones, Oak Ridge National Laboratory, United States
S32 Control of Multilevel Converters II
Room: 103/105Chair: Axel Mertens
8:00 am • Repetitive Control Scheme for Circulating Current Suppression in Modular Multilevel ConvertersLiqun He, Kai Zhang, Jian Xiong and Shengfang Fan, Huazhong University of Science and Technology, China
8:25 am • Average Power Balancing Control of a STATCOM based on the Cascaded H-bridge PWM Converter with Star ConfigurationShih-Feng Chou, Bo-Siang Wang, Sheng-Wan Chen, Chia-Tse Lee, Po-Tai Cheng, Hirofumi Akagi and Peter Barbosa, Delta Electronics, Inc., Taiwan; National Tsing Hua University, Taiwan; Hon Hai Precision Industry Co., Ltd., Taiwan; Tokyo Institute of Technology, Japan
8:50 am • Closed-loop Current Control of Multilevel Converters Formed by Parallel Complementary Unidirectional Phase-legsCarlos Teixeira, Brendan McGrath and Grahame Holmes, RMIT University, Australia
9:15 am • Implementation of a Single Space Vector Control Strategy for a Seven-level InverterJazmin Ramirez-Hernandez, Ismael Araujo-Vargas, Kevin Cano-Pulido and Jesus Medina-Jurado, National Polytechnic Institute of Mexico, Mexico
S33 PV Generation I
Room: 104/106Chair: Dezso Sera
8:00 am • Control of PV Generation Systems using a Synchronous Power ControllerPedro Rodriguez, J. Ignacio Candela and Alvaro Luna, Abengoa Research, Spain; Technical University of Catalonia, Spain
8:25 am • Minimum DC-link Capacitance Requirement of a Two-Stage Photovoltaic InverterTuomas Messo, Juha Jokipii and Teuvo Suntio, Tampere University of Technology, Finland
8:50 am • Hot Spotting and Second Breakdown Effects on Reverse I-V Characteristics for Mono-Crystalline Si PhotovoltaicsKatherine Kim and Philip Krein, University of Illinois at Urbana-Champaign, United States
9:15 am • PV Ground-fault Detection Using Spread Spectrum Time Domain Reflectometry (SSTDR)Mohammed Alam, Faisal Khan, Jay Johnson and Jack Flicker, University of Utah, United States; Sandia National Laboratories, United States
S34 Microgrids
Room: 107/109Chair: Ashwin Khambadkone
8:00 am • Cost-Prioritized Droop Schemes for Autonomous MicrogridsInam Ullah Nutkani, Poh Chiang Loh and Frede Blaabjerg, Experimental Power Grid Centre, A*STAR/ NTU, Singapore; Aalborg University, Denmark
8:25 am • Implementing PCC Voltage Estimation Utilising Cascaded PI Controllers in the dq Rotating Reference Frame for Microgrid Inverter ControlChristopher Rowe, Terrence Summers, Robert Betz and Timothy Moore, University of Newcastle / CSIRO Energy Centre, Australia
8:50 am • Coordinated Power Control Strategy based on Primary-Frequency-Signaling for Islanded MicrogridsDan Wu, Josep Maria Guerrero, Juan Carlos Vasquez, Tomislav Dragicevic and Fen Tang, Aalborg University, Denmark; Beijing Jiaotong University, China
9:15 am • Virtual Impedance Current Limiting for Inverters in Microgrids with Synchronous GeneratorsAndrew Paquette and Deepak Divan, Georgia Institute of Technology, United States
S35 Converter Modeling and Control III
Room: 108Chair: Pericle Zanchetta
8:00 am • Ineffectiveness of Orthogonal Axes Cross-Coupling Decoupling Technique in Dual Sequence Current ControlAlejandro G. Yepes, Ana Vidal, Jano Malvar, Oscar Lopez, Jesus Doval-Gandoy and Francisco D. Freijedo, University of Vigo, Spain; Gamesa Innovation and Technology, Spain
8:25 am • Modeling and Controller Design for Series-connected Output Universal Link ConverterMyoungho Kim, Seung-Ki Sul and Anno Yoo, Samsung Heavy Industries, Korea (South); Seoul National University, Korea (South); LSIS, Korea (South)
8:50 am • Modulated Model Predictive Control (M2PC) for a 3-phase Active Front-endLuca Tarisciotti, Pericle Zanchetta, Alan Watson, Jon Clare, Marco Degano and Stefano Bifaretti, University of Nottingham, United Kingdom; University of Rome “Tor Vergata”, Italy
9:15 am • Repetitive Scheme Plugged-in Parallel with Deadbeat Controller for VFD Fed by Cascaded Multilevel InverterMohamed Trabelsi, Lazhar Ben-Brahim, Tomoki Yokoyama, Atsuo Kawamura, Teruo Yoshino and Ryoichi Kurosawa, Qatar University, Qatar; Tokyo Denki University, Japan; Yokohama National University, Japan; Tmeic, Japan
2013 IEEE Energy Conversion Congress & Exposition® • 45Technical Program Schedule | Oral Sessions
S36 Power Converters for Transportation Applications I
Room: 110/112Chair: Tony O’Gorman
8:00 am • Design of a High-efficiency 12V/1kW 3-phase BLDC Motor Drive System for Diesel Engine Emissions ReductionsAllan Taylor, Chenguang Jiang, Kevin Bai, Adam Kotrba, Argun Yetkin and Arda Gundogan, Kettering Univ, United States; Tenneco, Inc, United States
8:25 am • Design of A 2.5kW 400V/12V High-Efficiency DC-DC Converter Using A Novel Synchronous Rectification Control for Electric VehiclesChen Duan, Wei Guo, Kevin Bai, Zhong Nie, Mengyang Zhang, Fred Householder and Dennis Krozek, Kettering Univ, United States; Chrysler LLC, United States
8:50 am • Centralized Control of Parallel Connected Power Conditioning System for Battery Energy Storage System in Charge-discharge-storage Power StationChangsong Chen, Baoqi Liu, Shanxu Duan and Changyue Zou, Huazhong University of Science and Technology, China
9:15 am • High-efficiency Soft-switching PWM DC-DC Converter for Electric Vehicle Battery ChargersMin-Kwon Yang, Hyoung-Sup Cho, Seung-Jae Lee and Woo-Young Choi, Chonbuk National University, Korea (South)
S37 Power Converters for Utility Applications I
Room: 111/113Chair: Jul-Ki Seok
8:00 am • Multi-mode Interleaved Boost Converter for Photovoltaic Power Systems with Low-voltage Ride-through CapabilityCheng-Yu Tang, Yao-Ting Chen, Yen-Fu Chen, Yaow-Ming Chen and Yung-Ruei Chang, National Taiwan University, Taiwan; Institute of Nuclear Energy Research, Taiwan
8:25 am • Bidirectional Series AC-link InverterMahshid Amirabadi, Hamid A. Toliyat and Jeihoon Baek, Texas A and M University, United States; Samsung Advanced Institute of Technology, Korea (South)
8:50 am • Modeling and Analysis of a Micro-inverter Configuration for High Power Phosphoric Acid Fuel Cell ApplicationSomasundaram Essakiappan, Harish S. Krishnamoorthy, Jorge Ramos-Ruiz, Prasad Enjeti, Mohamed Arifujjaman and Tejinder Singh, Texas A and M University, United States; UTC Power, United States
9:15 am • Smart High Voltage Circuit Breaker in Overhead Power Lines for Smart Grid ApplicationsAmir Pasdar and Yilmaz Sozer, University of Akron, United States
S38 Fault Detection and Fault Tolerant Drives
Room: 201Chair: A.J. Marques Cardoso
8:00 am • Ground Fault Location Identification for Multiple Drive High Resistance Grounding SystemsLixiang Wei, Jiangang Hu, Jeffrey McGuire and Zhijun Liu, Rockwell Automation, United States
8:25 am • Post-fault Operation of an Asymmetrical Six-phase Induction Machine with Single and Two Isolated Neutral PointsHang Seng Che, Mario Duran, Emil Levi, Martin Jones, Wooi Ping Hew and Nasrudin Bin Abd Rahim, LJMU, United Kingdom; University of Malaga, Spain; University of Malaya, Malaysia
8:50 am • Fault Tolerant AC Multi-drive SystemMario Pulvirenti, Giuseppe Scarcella, Giacomo Scelba, Mario Cacciato and Antonio Testa, University of Catania, Italy; University of Messina, Italy
9:15 am • Short-circuit Fault-tolerant Control of Bearingless Permanent Magnet Slice MachineXiaolin Wang, Xinyu Ren and Julia Zhang, Nanjing Univ. of Aeronautics and Astronautics, China; Oregon State University, United States
S39 Predictive Control of Drives
Room: 203Chair: Tobias Geyer
8:00 am • Multistep Direct Model Predictive Control for Power Electronics — Part 1: AlgorithmTobias Geyer and Daniel Quevedo, ABB Corporate Research, Switzerland; The University of Newcastle, Australia
8:25 am • Multistep Direct Model Predictive Control for Power Electronics — Part 2: AnalysisTobias Geyer and Daniel Quevedo, ABB Corporate Research, Switzerland; The University of Newcastle, Australia
8:50 am • Predictive Torque Control for AC Drives: Improvement of Parametric Robustness using Two-degree-of-freedom ControlJean-Francois Stumper, Sascha Kuehl and Ralph Kennel, Technical University of Munich, Germany
9:15 am • Torque Ripple Reduction of Model Predictive Torque Control of Induction Motor DrivesYongchang Zhang and Haitao Yang, North China University of Technology, China
S40 Non-Conventional Electric Machines
Room: 205Chair: Mircea Popescu
8:00 am • Analytical Stiffness Calculations of a Cone-shaped Magnetic Vibration Isolator for a Micro BalanceDave van Casteren, Johan Paulides, Jeroen Janssen and Elena Lomonova, Eindhoven University of Technology, Netherlands
8:25 am • Efficiency Improvement of a High Dynamic BLDC Linear Motor by Multiphase ControlJoris Lemmens, Kristof Mulier, Johan Driesen, Kris Vanvallasselaer, Stijn Goossens and Wim Symens, KU Leuven, Belgium; Flanders’ Mechatronics Technology Centre (FMTC), Belgium
8:50 am • Design of a Novel Homopolar Bearingless Slice Motor with Reluctance RotorWolfgang Gruber, Michael Rothboeck and Reto Schoeb, Johannes Kepler University, Austria; Levitronix GmbH, Switzerland
9:15 am • Improvement of Torque Density of Variable Reluctance Vernier Machine for Hybrid Electric VehicleMasahiro Takano and Shoji Shimomura, Shibaura Institute of Technology, Japan
46 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Oral Sessions
S41 IPM Machines I
Room: 207Chair: Radu Bojoi
8:00 am • Brushless AC Interior-permanent Magnet Motor Design: A Comparison of Slot/Pole Combinations and Distributed Vs. Concentrated WindingsJames Goss, Dave Staton, Rafal Wrobel and Phil Mellor, Motor Design Ltd, United Kingdom; University of Bristol, United Kingdom
8:25 am • Reduction of Rotor Losses in Multi Layer Interior Permanent Magnet Synchronous Motors by Introducing Novel Topology of Rotor Flux BarriersKatsumi Yamazaki, Yusuke Kato, Takeshi Ikemi and Shunji Ohki, Chiba Institute of Technology, Japan; Nissan Motor Co., Ltd., Japan
8:50 am • Analysis of Stator Iron Loss in Interior PM Machines under Open and Short-circuit ConditionsChun Tang, Wen Soong, Gene Liew, Nesimi Ertugrul and Thomas Jahns, University of Adelaide, Australia; University of Wisconsin - Madison, United States
9:15 am • Rotor Saturation Impact in Synchronous Reluctance and PM Assisted Reluctance MotorsMarco Ferrari, Nicola Bianchi and Emanuele Fornasiero, University of Padova, Italy
S42 Power Electronic Modules II
Room: 210/212Chair: Enrico Santi
8:00 am • High Frequency Integrated Point of Load (POL) Module with PCB Embedded Inductor SubstrateYipeng Su, Wenli Zhang, Qiang Li, Fred Lee and Mingkai Mu, CPES, Virginia Tech, United States
8:25 am • Component Proximity Effects in High Density and High Switching Speed Power ConvertersInus Grobler and Michael Gitau, University Pretoria, South Africa
8:50 am • Parasitic Modeling for Accurate Inductive Switching Simulation of Converters using SiC DevicesRuiyun Fu, Alexander Grekov, Kang Peng and Enrico Santi, University of South Carolina, United States
9:15 am • Detailed Derivation and Minimization of the Equivalent Parasitic Capacitance of a High Voltage Multiplier Based on the Complete ModelJianing Wang, Sjoerd W.H. de Haan and Jan Abraham Ferreira, Delft University of Technology, Netherlands
Wednesday, September 18 10:00 am – 11:40 am
SS4 Special Session: Advances in Wireless Power for Electric Vehicles II
Room: 102Chair: Grant Covic
10:00 am • Key Challenges in EV Wireless ChargingChris Mi, University of Michigan, United States
10:25 am • German Activities on Contactless Inductive Power TransferJurgen Meins, Technical University of Braunschweig, Germany
10:50 am • Characteristic Comparison between H-shaped Core and Circular Core in Wireless Power Transfer Systems for Electric VehicleYasuyoshi Kaneko, Saitama University, Japan
11:15 am • Wireless EV Charging, Optimum Operating Frequency Selection for Power Range 3.3 and 6.6 kWGrzegorz Ombach, Qualcomm, Germany
S43 Multilevel Converter Topologies
Room: 103/105Chair: Luca Solero
10:00 am • A Multilevel Converter Topology with Common Flying CapacitorsHui Zhang, Wei Yan, Kazuya Ogura and Shota Urushibata, Meiden Singapore, Singapore; Meidensha Corporation, Japan
10:25 am • New Five-level Active Neutral Point Clamped ConverterEduardo Burguete, Mikel Zabaleta and Jesus Lopez, Public University of Navarre, Spain; Ingeteam Power Technology, Spain
10:50 am • Comparative Evaluation of T-type Topologies Comprising Standard and Reverse-blocking IGBTsHirofumi Uemura, Florian Krismer and Johann W. Kolar, Swiss Institute of Technology, Switzerland
11:15 am • Performance Evaluation among Four Types of Five-level Topologies using Pareto Front CurvesYugo Kashihara and Jun-ichi Itoh, Nagaoka University of Technology, Japan
S44 PV Generation II
Room: 104/106Chair: Jonathan Bird
10:00 am • Leakage Current Suppression for PV Cascaded Multilevel Inverter Using GaN DevicesYan Zhou and Hui Li, Florida State University, United States
10:25 am • Two-switch Voltage Equalizer Using Series-resonant Inverter and Voltage Multiplier for Partially-shaded Series-Connected Photovoltaic ModulesMasatoshi Uno and Akio Kukita, Japan Aerospace Exploration Agency, Japan
10:50 am • Improving Output Current Distortion in Hybrid BCM Current Controlled 3-phase Micro-inverterAhmadreza Amirahmadi, Haibing Hu, Anna Grishina, Lin Chen, John Shen and Issa Batarseh, University of Central Florida, United States
11:15 am • Enhanced Experimental PV Plant Grid-integration with a MW Lithium-ion Energy Storage SystemHaizea Gaztanaga, Joseba Landaluze, Ion Etxeberria-Otadui, Asun Padros, Inigo Berazaluce and David Cuesta, IKERLAN-IK4 Technological Research Centre, Spain; ACCIONA Energia, Spain
S45 Microgrids Systems
Room: 107/109Chair: Adel Nasiri
10:00 am • Reducing Fuel Consumption in a Forward Operating Base using an Energy Management SystemRyan Kelly, Giovanna Oriti and Alexander Julian, Naval Postgraduate School, United States
2013 IEEE Energy Conversion Congress & Exposition® • 47Technical Program Schedule | Oral Sessions
10:25 am • An Accurate Autonomous Islanding Microgrid Reactive Power, Imbalance Power and Harmonic Power Sharing SchemeJinwei He, Yun Wei Li and Frede Blaabjerg, University of Alberta, Canada; Aalborg University, Denmark
10:50 am • Microgrid System with Voltages in QuadratureEuzeli Santos and Maryam Alibeik, Purdue School of Engineering and Technology, IUP, United States
11:15 am • Design and Development of a Reconfigurable Hybrid Microgrid TestbedFeng Guo, Luis Herrera, Mohammed Alsolami, He Li, Pu Xu, Xintong Lu, Andong Lang, Zhijun Long and Jin Wang, The Ohio State University, United States; Wuhan University, China
S46 Converter Modeling and Control IV
Room: 108Chair: Stefano Bifaretti
10:00 am • Phase-oriented Control of a Modular 3-phase 3-level 4-leg Inverter AC Power Source Supplying Floating or Grounded LoadsPatricio Cortes, David Olivier Boillat and Johann Kolar, ETH Zurich, Switzerland
10:25 am • Uncoupled Direct Power Control Based on Improved Sector Selection Algorithm for 3-level PWM RectifierTing Lu, Zhengming Zhao, Liqiang Yuan and Fanbo He and Yingchao Zhang, Tsinghua University, China; Chongqing Communication Institute, China
10:50 am • Observer-based State-space Current Control for a 3-phase Grid-connected Converter Equipped with an LCL FilterJarno Kukkola and Marko Hinkkanen, Aalto University, School of Electrical Engineering, Finland
11:15 am • Command Generation for Wide Range Operation of Hysteresis Controlled Vienna RectifiersNicole C. Foureaux, James H. Oliveira Junior, Filipe D. de Oliveira, Rafael S. de Faria and Braz de J. Cardoso Filho, Universidade Federal de Minas Gerais, Brazil; ESAB Brasil, Brazil
S47 Power Converters for Transportation Applications II
Room: 110/112Chair: Suman Dwari
10:00 am • Propulsion System Architecture and Power Conditioning Topologies for Fuel Cell VehiclesUdupi Rajagopal Prasanna, Pan Xuewei, Akshay Rathore and Kaushik Rajashekara, University of Texas, Dallas, United States; National University of Singapore, Singapore
10:25 am • Soft Switching, Frequency Control, and Bidirectional Power Flow of an Isolated Quasi-switched-capacitor DC-DC Converter for Automotive ApplicationsXuan Zhang, Chengcheng Yao, Feng Guo, Cong Li, Lixing Fu, Cong Deng and Jin Wang, The Ohio State University, United States
10:50 am • Performance Analysis of Bidirectional DC-DC Converters for Electric Vehicles and Charging InfrastructureAdeeb Ahmed, Mehnaz Khan, Mohamed Badawy, Yilmaz Sozer and Iqbal Husain, University of Akron, United States; North Carolina State University, United States
11:15 am • Second Harmonic Current Reduction by Using a Resonant Circuit in a Single-phase Battery ChargerHyunsung An and Hanju Cha, Chungnam National University, Korea (South)
S48 Power Converters for Utility Applications II
Room: 111/113Chair: Sandeep Bala
10:00 am • A Power Efficiency Improvement Technique for a Bidirectional Dual Active Bridge DC-DC Converter at Light LoadMika Takasaki, Yoichi Ishizuka, Tamotsu Ninomiya, Yutaka Furukawa and Toshiro Hirose, Nagasaki University, Japan; Koga System Works, Japan; Nishimu Electronics Industries Co., Ltd., Japan
10:25 am • Considerations for the Design of Power Electronic Modules for Hybrid Distribution TransformersJyoti Sastry and Sandeep Bala, ABB Corporate Research Center, United States
10:50 am • Active Voltage Control of SiC-SIT Circuit Breakers for Overvoltage SuppressionBao Cong Hiu, Toru Saito, Yukihiko Sato, Yasunori Tanaka, Akio Takatsuka and Akira Matsumoto, Chiba University, Japan; AIST, Japan; NTT Facilities, Inc., Japan
11:15 am • Stable Operation of Multiple Power RoutersRajendra Prasad Kandula, Amrit Iyer and Deepak Divan, Georgia Institute of Technology, United States
S49 Current Regulation in Drives
Room: 201Chair: Radu Bojoi
10:00 am • Current Control Method with Control Inputs in Polar Coordinates for SPMSM Based on Linearized ModelTakayuki Miyajima, Hiroshi Fujimoto and Masami Fujitsuna, University of Tokyo, Japan; DENSO Corporation, Japan
10:25 am • Optimized Harmonic Current Control Strategy for Nonlinearities Compensation in Multiphase AC DrivesAlejandro G. Yepes, Jano Malvar, Ana Vidal, Oscar Lopez and Jesus Doval-Gandoy, University of Vigo, Spain
10:50 am • New Model Based Predictive Current Control Strategy for Doubly Salient Permanent Magnet Synchronous MachinesWei Xu, Ronghai Qu and Wenwu Yang, Huazhong University of Science and Technology, China; Sichuan Deyang Electric Power Bureau, China
11:15 am • A Simple Tuning Method Aimed at Optimal Settling Time and Overshoot for Synchronous PI Current Control in Electric MachinesAlejandro G. Yepes, Ana Vidal, Francisco D. Freijedo, Jano Malvar, Oscar Lopez and Jesus Doval-Gandoy, University of Vigo, Spain; Gamesa Innovation and Technology, Spain
S50 High Power Drives and MultilevelPower Converters
Room: 203Chair: Stefan Schroeder
10:00 am • A Speed-sensorless Startup Method of an Induction Motor Driven by a Modular Multilevel Cascade Inverter (MMCI-DSCC)Yuhei Okazaki, Makoto Hagiwara and Hirofumi Akagi, Tokyo Institute of Technology, Japan
10:25 am • Control Strategy for Improved Dynamic Performance of Variable-speed Drives with the Modular Multilevel ConverterJae-Jung Jung, Hak-Jun Lee and Seung-Ki Sul, Seoul National University, Korea (South)
48 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Oral Sessions
10:50 am • Damping Concepts of LCL Filter for a Multi-level Medium Voltage Adjustable Speed Drive with Low Pulse RatioQingyun Chen, Jie Shen, Hanno Stagge, Stefan Schroeder and Rik De Doncker, GE Global Research, Germany; RWTH Aachen University, Germany
11:15 am • Investigation of Harmonics Interaction in High-power PWM Current-source Motor DrivesYe Zhang and Yun Wei Li, University of Alberta, Canada
S51 Thermal Analysis of Electric Machines
Room: 205Chair: Aldo Boglietti
10:00 am • Thermal Modelling of a Fractional-slot Concentrated-winding Kaman Type Axial-flux Permanent-magnet MachineGyula Vainel, Dave Staton, Fabio Giulii Capponi, Giulio De Donato and Federico Caricchi, Motor Design Ltd., United Kingdom; University of Roma “La Sapienza”, Italy
10:25 am • On the Improvement of the Thermal Behavior of Electric MotorsMohamed Rabie Guechi, Philippe Desevaux, Philippe Baucour, Christophe Espanet, Raphael Brunel and Marianne Poirot, University of Franche-Comte, France; INSA-Lyon, France
10:50 am • Conjugate Heat Transfer Analysis of Integrated Brushless Generators for More Electric EnginesMarco Tosetti, Paolo Maggiore, Andrea Cavagnino and Silvio Vaschetto, Politecnico di Torino, Italy
11:15 am • Determination of Rotor-stator Heat Exchange Coefficients in the Case of Totally Enclosed Machines: Application to an Integrated Starter-generatorGuy Friedrich, Stephane Vivier, Radhouanve Khlissa, Khadija El kadri Benkara and Bassel Asaad, Centre Technique des Industries Mécaniques, France
S52 PM Machines
Room: 207Chair: Prabhakhar Neti
10:00 am • High Power Factor Vernier Permanent Magnet MachinesDawei Li, Ronghai Qu and Thomas A. Lipo, Huazhong University of Science and Technology, China; University of Wisconsin-Madison, United States
10:25 am • A Two-axis Actively Regulated Consequent-pole Bearingless Motor with Wide Magnetic GapsJunichi Asama, Tomoyoshi Tatara, Takaaki Oiwa and Akira Chiba, Shizuoka University, Japan; Tokyo Institute of Technology, Japan
10:50 am • Design Methodology for Variable-flux, Flux-intensifying Interior Permanent Magnet Machines for an Electric Vehicle Class Inverter RatingNatee Limsuwan, Takashi Fukushige, Kan Akatsu and Robert Lorenz, University of Wisconsin - Madison, United States; Nissan Motor Co., Ltd., Japan; Shibaura Institute of Technology, Japan
11:15 am • Cogging Torque Reduction in Flux Switching Permanent Magnet Machines by Rotor Pole ShapingChandan Sikder, Iqbal Husain and Wen Ouyang, NC State University, United States; ABB US Corporate Research Center, United States
S53 Wide Bandgap Semiconductors II
Room: 210/212Chair: Craig Winterhalter
10:00 am • Active Current Balancing for Parallel-Connected Silicon Carbide MOSFETsYang Xue, Junjie Lu, Zhiqiang Wang, Leon Tolbert, Benjamin Blalock and Fred Wang, The University of Tennessee, United States
10:25 am • Maximum Switching Frequency Characterization of 4.5kV-400A SiC-PiN Diode and Si-IEGT Hybrid Pair Power ModuleKazuto Takao, Keiji Wada, Kyungmin Sung, Yuji Mastuoka, Yasunori Tanaka, Shinichi Nishizawa, Chiharu Ota, Takeo Kanai, Takashi Shinohe and Hiromichi Ohashi, Toshiba Corporation, Japan; Tokyo Metropolitan University, Japan; Ibaraki National College of Technology, Japan; Toshiba Mitsubishi-Electric Industrial System Corporation, Japan; National Institute of Advanced Industrial Science and Technology, Japan
10:50 am • Experimental Evaluation of 10 kHz Switching Operation of 4.5kV-400A SiC-PiN Diode and Si-IEGT Hybrid Pair ModuleKazuto Takao, Keiji Wada, Kyungmin Sung, Yuji Mastuoka, Yasunori Tanaka, Shinichi Nishizawa, Chiharu Ota, Takeo Kanai, Takashi Shinohe, and Hiromichi Ohashi, Toshiba Corporation, Japan; Tokyo Metropolitan University, Japan; Ibaraki National College of Technology, Japan; Toshiba Mitsubishi-Electric Industrial System Corporation, Japan; National Institute of Advanced Industrial Science and Technology, Japan
11:15 am • Experimental Validation of Newly Fabricated Normally-on GaN High-electron-mobility TransistorTakaharu Ishibashi, Masayuki Okamoto, Eiji Hiraki, Toshihiko Tanaka, Tamotsu Hashizume, Daigo Kikuta and Tetsu Kachi, Yamaguchi University, Japan; Ube National College of Technology, Japan; Hokkaido University, Japan; Toyota Central R&D LABS., INC., Japan; JST, CREST, Japan
Wednesday, September 18 1:30 pm – 3:10 pm
S54 Charging Systems
Room: 102Chair: Fabio Giulii Capponi
1:30 pm • An Integrated Onboard Charger and Accessory Power Converter for Plug-in Electric VehiclesGui-Jia Su and Lixin Tang, Oak Ridge National Laboratory, United States
1:55 pm • A Utility Interfaced Half-bridge Based Capacitively Coupled Power Transfer Circuit with Automatic Frequency ControlSaurabh Shekhar, Santanu Mishra and Avinash Joshi, Indian Institute of Technology Kanpur, India
2:20 pm • A Seal Lead-acid Battery Charger for Prolonging Battery Lifetime Using Superimposed Pulse Frequency TechniqueNattapat Praisuwanna and Surin Khomfoi, King Mongkut’s Institute of Technology Ladkraban, Thailand
2:45 pm • Design and Implementation of a 75 KW Mobile Charging System for Electric VehiclesMohamed Badawy, Nayeem Arafat, Saeed Anwar, Adeeb Ahmed, Yilmaz Sozer and Ping Yi, University of Akron, United States
2013 IEEE Energy Conversion Congress & Exposition® • 49Technical Program Schedule | Oral Sessions
SS5 Special Session: Recent Advancesin Switched Capacitor Circuits I
Room: 103/105Chair: Jin Wang
1:30 pm • Switched-capacitor/Multilevel DC-DC Converters — Advance and ApplicationsWei Qian, Dong Cao and Fang Zheng Peng, Magna Electronics, United States; Ford Motor Company, United States; Michigan State University, United States
1:55 pm • Calculation Program Supporting Switched Capacitor DC-DC Charge Pump DesignMarek S. Makowski and Pawel Maszota, Gdansk University of Technology, Poland
2:20 pm • Soft Charging Operation of Switched Capacitor Converters — Increasing Power Density and EfficiencyRobert Pilawa-Podgurski, University of Illinois at Urbana-Champaign, United States
2:45 pm • Performance Modeling of Switched-Capacitor ConvertersJonathan W. Kimball, Missouri University of Science and Technology, United States
S55 PV Generation III
Room: 104/106Chair: John Salmon
1:30 pm • Simulation Platform for Dynamic Photovoltaic ArraysJonathan Storey, Peter Wilson and Darren Bagnall, University of Southampton, United Kingdom
1:55 pm • An Optimized Common Mode Voltage Reduction PWM Strategy for T-type 3-phase Three Level Photovoltaic Grid-tied InverterLi Zhang, Kai Sun and Yu Fang, Tsinghua University, China; Southeast University, China
2:20 pm • Graph-based Semi-supervised Learning for Fault Detection and Classification in Solar Photovoltaic ArraysYe Zhao, Brad Lehman, Roy Ball and Jean-Francois de Palma, Northeastern University, United States; Mersen USA Newburyport-MA LLC, United States
2:45 pm • A Novel Second Harmonic Current Reduction Method for Dual Active Bridge Used in Photovoltaic Power SystemWang Wentao, Ruan Xinbo and Wang Xuehua, Huazhong University of Science and Technology, China
S56 Microgrid Control
Room: 107/109Chair: Thomas Jahns
1:30 pm • Modeling and Control of a Natural Gas Generator Set in the CERTS MicrogridAjit A Renjit, Mahesh Illindala, Robert Lasseter, Micah J Erickson and Dave Klapp, The Ohio State University, United States; University of Wisconsin - Madison, United States; American Electric Power, United States
1:55 pm • Improving Microgrid Performance by Cooperative Control of Distributed Energy SourcesPaolo Tenti, Alessandro Costabeber, Tommaso Caldognetto and Paolo Mattavelli, University of Padova, Italy
2:20 pm • A Nonlinear Disturbance Observer Based DC Bus Voltage Control for a Hybrid AC-DC MicrogridXialin Li, Chengshan Wang, Li Guo and Yunwei Li, Tianjin University, China; Alberta University, Canada
2:45 pm • Construction of Nonlinear Droop Relations to Optimize Islanded Microgrids OperationAli Elrayyah and Yilmaz Sozer, University of Akron, United States
S57 Converters EMI
Room: 108Chair: Giovanna Oriti
1:30 pm • Impact of Interleaving on Common Mode EMI Filter Weight Reduction of Paralleled 3-phase Voltage-source ConvertersXuning Zhang, Dushan Boroyevich and Rolando Burgos, Virginia Polytechnic Institute and State University, United States
1:55 pm • Characterising and Modeling Extended Conducted Electromagnetic Interference In Densely Packed DC-DC ConvertersInus Grobler and Michael Gitau, University Pretoria, South Africa
2:20 pm • Shaping Pulse Transitions by Active Voltage Control fore Reduced EMI GenerationXin Yang and Patrick Palmer, University of Cambridge, United Kingdom
2:45 pm • The Input Impedance of Common Mode and Differential Mode Noise SeparatorsKonstantin Kostov, Hans-Peter Nee and Martin Priecinsky, KTH Royal Institute of Technology, Sweden; University of Zilina, Slovakia
S58 Power Converters for RenewableEnergy Applications I
Room: 110/112Chair: Lei Xing
1:30 pm • High Power Solid-state Step-up Resonant Marx Modulator with Continuous Output Current for Offshore Wind Energy SystemsAmir Parastar, Ali Gandomkar, MingGuo Jin and Jul-Ki Seok, YeungNam University, Korea (South)
1:55 pm • Multi-resonant based Sliding Mode Control of Grid-connected Converter under Distorted Grid ConditionsYu Quan and Heng Nian, Zhejiang University, China
2:20 pm • Open-Switch Fault Detection Method of an NPC Converter for Wind Turbine SystemsJune-Seok Lee, Kyo-Beum Lee and Frede Blaabjerg, Ajou University, Korea (South); Aalborg University, Denmark
2:45 pm • An Inrush Current Mitigation Method for the Grid-connected Converters in the Low-voltage Ride-through OperationChih-Hsin Chen, Hsin-Cheng Ko and Po-Tai Cheng, National Tsing Hua University, Taiwan
S59 Multilevel Converters I
Room: 111/113Chair: Edison da Silva
1:30 pm • Power Loss and Thermal Characterisation of IGBT Modules in the Alternate Arm ConverterPaul Judge, Michael M C Merlin, Paul Mitcheson and Tim Green, Imperial College London, United Kingdom
50 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Oral Sessions
1:55 pm • Fault Tolerant Cost-effective Carrierless Stochastic Synthesis of Voltages and Currents in Multi-cell Multilevel Converters via the Central Limit TheoremPierluigi Tenca and Luca Peretti, IEEE Member (formerly at ABB Corporate Research), Germany; ABB Corporate Research, Sweden
2:20 pm • A Component-minimized Dual-output Multilevel Converter and its ApplicationsWenping Zhang, Joshua Hawke, Prasad Enjeti, Dehong Xu and Changsheng Hu, Zhejiang University, China; Texas A-M University, United States
2:45 pm • Enhanced FPGA Based 3-level Space Vector Pulse Width Modulation with Active Neutral Point BalancingAlexander Bartsch, Florian Senicar, Sascha Kratz and Stefan Soter, University of Wuppertal, Germany
S60 Hardware-in-the-loop, Simulation,and Hardware Issues
Room: 201Chair: Tobias Geyer
1:30 pm • High-fidelity Real-time Hardware-in-the-loop Emulation of PMSM Inverter DrivesJason Poon, Elaina Chai, Ivan Celanovic, Adrien Genic and Evgenije Adzic, University of Novi Sad, Serbia
1:55 pm • FPGA-based Detailed Real-time Simulation of Power Electronic Converters and Electric Machines for EV HIL ApplicationsLuis Herrera and Jin Wang, The Ohio State University, United States
2:20 pm • Hardware-in-the-loop Simulation Verification of a Smooth Transition Algorithm Between Maximum Torque per Ampere Control and Single Current RegulatorDakai Hu, Feng Guo and Longya Xu, The Ohio State University, United States
2:45 pm • Analysis of Current Sampling Errors in PWM, VSI DrivesChristopher Wolf, Michael Degner and Fernando Briz, Ford Motor Company, United States; University of Oviedo, Spain
S61 Direct Torque Control
Room: 203Chair: Mario Pacas
1:30 pm • Deadbeat, Direct Torque and Flux Control of IPMSM Drives Using a Minimum Time Ramp Trajectory Method at Voltage and Current LimitsJae Suk Lee and Robert Lorenz, University of Wisconsin - Madison, United States
1:55 pm • Deadbeat-direct Torque and Flux Control on Low Switching Frequency Induction Machine Drives Using the Enhanced Flux Observer and Torque ModelYukai Wang, Shunsuke Tobayashi and Robert Lorenz, University of Wisconsin-Madison, United States; TMEIC, Japan
2:20 pm • Discrete-time Physical Limits-based Enhanced Finite-settling-step Direct Torque and Flux Control for IPMSM DrivesSeHwan Kim and Jul-Ki Seok, YeungNam University, Korea (South)
2:45 pm • Square-wave Operation of Direct Torque Controlled PMSM Drive SystemYukinori Inoue, Yuichiro Maeda, Shigeo Morimoto and Masayuki Sanada, Osaka Prefecture University, Japan
S62 DC-DC Non-Isolated III
Room: 205Chair: Pat Wheeler
1:30 pm • Performance Analysis of Generalized Algebraic Switched Capacitor ConvertersJonathan Kimball, Missouri University of Science and Technology, United States
1:55 pm • 27.12 MHz Large Voltage Gain Resonant Converter with Low Voltage StressLuke Raymond, Wei Liang, Jungwon Choi and Juan Rivas, University of Michigan, United States
2:20 pm • Mitigation and Utilization of the Inductor Coupling Effect in Interleaved Multiphase DC-DC ConvertersWenkang Huang and Brad Lehman, Northeastern University, United States
2:45 pm • A Novel Switched-coupled-inductor DC-DC Step-up ConverterShih-Ming Chen, Tsorng-Juu Liang, Kai-Hui Chen, Man-Long Lao and Yi-Chien Shen, National Cheng-Kung University, Taiwan
S63 Synchronous Reluctance Machines
Room: 207Chair: Andy Knight
1:30 pm • Winding Configurations and Performance Investigations of 12-Stator Pole Variable Flux Reluctance MachinesX. Liu and Zi-Qiang Zhu, University of Sheffield, United Kingdom
1:55 pm • Sensitivity Analysis of Torque Ripple Reduction of Synchronous Reluctance and Interior PM MotorsNicola Bianchi, Michele Degano and Emanuele Fornasiero, University of Padova, Italy; University of Trieste, Italy
2:20 pm • BLDC Multiphase Reluctance Machines: A Revival Attempt with 2D FEM Investigation and Standstill TestsSorin Agarlita, Dragos Ursu, Lucian-Nicolae Tutelea, Ion Boldea and Babak Fahimi, Politehnica University of Timisoara, Romania; University Texas at Dallas, United States
2:45 pm • Design of Synchronous Reluctance Machines with Multi-objective Optimization AlgorithmsFrancesco Cupertino, Gianmario Pellegrino and Chris Gerada, Politecnico di Bari, Italy; Politecnico di Torino, Italy; University of Nottingham, United Kingdom
S64 Passive Components
Room: 210/212Chair: Robert Pilawa
1:30 pm • Reliability of Capacitors for DC-link Applications — An OverviewHuai Wang and Frede Blaabjerg, Aalborg University, Denmark
1:55 pm • Planar Integrated Multilayer Capacitive Substrate for DC-DC Converter ApplicationsThi Bang Doan, Thierry Lebey, Thierry Meynard and Francois Forest, Laplace, University of Toulouse, France; University of Montpellier, France
2013 IEEE Energy Conversion Congress & Exposition® • 51Technical Program Schedule | Oral Sessions
2:20 pm • Comprehensive Design of DC Busbars for Medium Voltage ApplicationsMartin Buschendorf, Marco Koebe, Rodrigo Alvarez and Steffen Bernet, Technical University of Dresden, Germany
2:45 pm • A Frequency-domain Study on the Effect of DC-link Decoupling CapacitorsZheng Chen, Dushan Boroyevich, Paolo Mattavelli and Khai Ngo, Virginia Tech, United States
Wednesday, September 18 3:30 pm – 5:10 pm
S65 Special Power Converters in Transportation
Room: 102Chair: Srdjan Lukic
3:30 pm • Novel Bidirectional Snubberless Soft-switching Naturally Clamped Zero Current Commutated Current-fed Dual Active Bridge (CFDAB) Converter for Fuel Cell VehiclesPan Xuewei and Akshay Rathore, National University of Singapore, Singapore
3:55 pm • Wireless Power Transfer Using Class E Inverter with Saturable DC Feed InductorSamer Aldhaher, Patrick Luk and James Whidborne, Cranfield University, United Kingdom
4:20 pm • A Novel Slow-switching Control for Multiple Pickup IPT SystemsLiang Chen, John Boys and Grant Covic, University of Auckland, New Zealand
4:45 pm • Efficient, MHz Frequency, Resonant Converter for Sub-meter (30cm) Distance Wireless Power TransferRyan Calder, Seung-Hwan Lee and Robert Lorenz, University of Wisconsin-Madison, United States
SS6 Special Session: Recent Advancesin Switched Capacitor Circuits II
Room: 103/105Chair: Jin Wang
3:30 pm • Modulation and Reconfiguration Techniques for Modular Capacitor-Clamped ConvertersFaisal Khan, The University of Utah, United States
3:55 pm • Suppression of Spurious Triggering in Synchronous Buck Converter With Switched-capacitor GateHenry Shu-hung Chung and Jianjing Wang, The City University of Hong Kong, Hong Kong
4:20 pm • Switched Capacitor Energy BuffersKhurram Afridi, Massachusetts Institute of Technology, United States
4:45 pm • Next Generation Switched-capacitor Circuits based on Wide Bandgap DevicesMark J. Scott and Jin Wang, The Ohio State University, United States
S66 PV Converters
Room: 104/106Chair: Pragasen Pillay
3:30 pm • A Single-stage Multi-string Quasi-resonant Inverter for Grid-tied Photovoltaic SystemsHamidreza Keyhani, Hamid A. Toliyat and William C. Alexander, Texas A-and-M University - College Station, United States; Ideal Power Converters Inc., United States
3:55 pm • Central Multilevel Current-fed Inverter with Module Integrated DC-DC Converters for Grid-connected PV PlantVishal Vekhande and B. G. Fernandes, Indian Institute of Technology Bombay, India
4:20 pm • Modular Multilevel Converter for Large-scale Multistring Photovoltaic Energy Conversion SystemSebastian Rivera, Ricardo Lizana, Samir Kouro, Marcelo Perez, Bin Wu and Jose Rodriguez, Ryerson University, Canada; Universidad Tecnica Federico Santa Maria, Chile
4:45 pm • Design of Module-integrated Converters for Photovoltaic StringsJunjian Zhao, Huimin Zhou and Yehui Han, University of Wisconsin-Madison, United States
S67 Control Under Unbalanced Grid Conditions
Room: 107/109Chair: Pedro Rodríguez
3:30 pm • Fault Ride Through Control of Medium-voltage Converters with LCL Filter in Distributed Generation SystemsRobert Meyer, Alexander Zlotnik and Axel Mertens, Leibniz University Hanover, Germany
3:55 pm • Control of Active Mobile Substations under System FaultsNima Yousefpoor, Babak Parkhideh, Ali Azidehak and Subhashish Bhattacharya, North Carolina State University, United States; University of North Carolina - Charlotte, United States
4:20 pm • Oscillatory Angle Control Scheme for PWM Static Synchronous Compensators under Unbalanced Conditions and System FaultsSaman Babaei and Subhashish Bhattacharya, North Carolina State University, United States
4:45 pm • Smart Impedance Application on Unbalanced Harmonic Mitigation in 3-phase Four-wire SystemsRobson Bauwelz Gonzatti, Silvia Costa Ferreira, Carlos Henrique da Silva, Luiz Eduardo Borges da Silva, Germano Lambert-Torres and Luiz Gonzaga Fernandez Silva, Federal University of Itajuba, Brazil; CPFL Energia, Brazil
S68 AC-DC Multi-phase I
Room: 108Chair: Radu Bojoi
3:30 pm • Current Source Rectifiers in Discontinuous Conduction Modes of OperationRobert Cuzner and Giri Venkataramanan, DRS Power and Control Technologies, United States; University of Wisconsin-Madison, United States
3:55 pm • Reduced Switch Multi-level Unidirectional RectifiersParag Kshirsagar, Suman Dwari and Shashank Krishnamurthy, United Technologies Research Center, United States
52 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Oral Sessions
4:20 pm • Analysis and Design of 3-phase Buck-Boost Quasi-Resonant Reduced Switch RectifierDunisha Wijeratne, Gerry Moschopoulos and Mehdi Narimani, University of Western Ontario, Canada
4:45 pm • Volume Minimization of the Main DM/CM EMI Filter Stage of a Bidirectional 3-phase 3-level PWM Rectifier SystemDavid Olivier Boillat, Johann Wlater Kolar and Jonas Muhlethaler, ETH Zurich, Switzerland
S69 Power Converters for RenewableEnergy Applications II
Room: 110/112Chair: Di Zhang
3:30 pm • A Dual-input Boost-buck Converter with Coupled Inductors for TEG ApplicationsFeng Cao, Junjun Zhang, Hongfei Wu, Haibing Hu, Yan Xing and Xudong Ma, Nanjing Univ. of Aeronautics and Astronautics, China; Southeast University, China
3:55 pm • A Simple Flyback Microinverter for Solar Energy Systems with Variable Frequency Controlled ZVSAniruddha Mukherjee, Majid Pahlevaninezhad and Gerry Moschopoulos, Western University, Canada, Canada; Queen’s University, Canada
4:20 pm • An On-chip Hysteretic-Current-Controlled LED Driver with Synchronous Rectification and Lossless Peak and Valley Current Sensing for High-brightness Lighting ApplicationsZhidong Liu and Hoi Lee, University of Texas at Dallas, United States
4:45 pm • Bidirectional Modular Multilevel DC-DC Converter Control and Efficiency Improvements through Separate Module Control MethodTodor Todorcevic, Pavol Bauer, Jan Abraham Ferreira and Rick van Kessel, Delft University of Technology, Netherlands; SBM Offshore, Monaco
S70 Resonant DC-DC
Room: 111/113Chair: Mor Mordechai Peretz
3:30 pm • Loss Reduction in a Medium Frequency Series Resonance Converter by Forced EvacuationLars Lindenmueller, Philipp Kleinichen, Chester Ditmanson, Rodrigo Alvarez and Steffen Bernet, Technische Universitaet Dresden, Germany
3:55 pm • VHF Series-Input Parallel-Output Interleaved Self-Oscillating Resonant SEPIC ConverterMilovan Kovacevic, Arnold Knott and Michael A. E. Andersen, Technical University of Denmark, Denmark
4:20 pm • New Optimal Design Methodology of Medium-Frequency Soft-Switching ConvertersAsier Garcia-Bediaga, Irma Villar, Alejandro Rujas, Ion Etxeberria-Otadui and Alfred Rufer, IK4-IKERLAN Technological Research Center, Spain; STI-IEL-LEI, EPFL, Switzerland
4:45 pm • A Load/Line Adaptive Zero Voltage Switching DC-DC Converter used in Electric VehiclesMajid Pahlevaninezhad, Hamid Danesh-Pajooh, Alireza Bakhshai and Praveen Jain, Queen’s University, Canada
S71 Control Issues in Electric Drives
Room: 201Chair: Uday Deshpande
3:30 pm • Unified Direct-Flux Vector Control of Induction Motor Self-Commissioning Drive with Analysis of Parameter Detuning EffectsShafiq Ahmed Odhano, Aldo Boglietti, Iustin Radu Bojoi and Eric Armando, Politecnico di Torino, Italy
3:55 pm • Single External Source Control of Doubly-Fed Induction Machine Using Dual InverterYongsu Han and Jung-Ik Ha, Seoul National University, Korea (South)
4:20 pm • Predictive direct flux vector control of Permanent Magnet Synchronous Motor DrivesBarbara Boazzo and Gianmario Pellegrino, Politecnico di Torino, Italy
4:45 pm • Fluctuating Current Control for a PMSM under Reduced DC Link CapacitanceJunwoo Kim, Ilsu Jeong, Kilho Lee and Kwanghee Nam, Pohang University of Science and Technology, Korea (South)
S72 Assorted Issues in Electric Drives
Room: 203Chair: Luca Zarri
3:30 pm • Stability Analysis and Improvements for Combined Voltage and Current Mode Flux Observer of Induction MachineKai Wang, Wenxi Yao, Kevin Lee and Zhengyu Lu, Zhejiang University, China; Eaton Corporation, United States
3:55 pm • Modeling of Permanent Magnet Synchronous Machine Including Torque Ripple EffectsAbraham Gebregergis, Mazharul Chowdhury, Mohammad Islam and Tomy Sebastian, Nexteer Automotive, United States
4:20 pm • A DC-flux-injection Approach for Thermal Monitoring of Induction Machines with Direct Torque ControlLijun He, Siwei Cheng, Yi Du, Ronald Harley and Thomas Habetler, Georgia Institute of Technology, United States; Ford Motor Company, United States
4:45 pm • Fault Tolerant Rotor Position and Velocity Estimation Using Binary Hall-effect Sensors for Low Cost Vector Control DrivesGiacomo Scelba, Giuseppe Scarcella, Giulio De Donato, Fabio, Giulii Capponi and Filippo Bonaccorso, University of Catania, Italy; Scuola Superiore Sant’Anna, Italy; University of Rome “La Sapienza”, Italy
S73 Modeling and Control V
Room: 205Chair: Hui Li
3:30 pm • Evaluation of Alternative Modulation Schemes For 3-level Neutral-Point-Clamped 3-phase InvertersXuning Zhang, Dushan Boroyevich, Rolando Burgos, Paolo Mattavelli and Fei Wang, Virginia Polytechnic Institute and State University, United States; University of Padova, Italy; University of Tennessee, United States
3:55 pm • Component Cost Models for Multi-Objective Optimizations of Switched-Mode Power ConvertersRalph Burkart and Johann Kolar, ETH Zurich, Switzerland
4:20 pm • An On-chip Hysteretic-Current-Controlled LED Driver with Synchronous Rectification and Lossless Peak and Valley Current Sensing for High-brightness Lighting ApplicationsZhidong Liu and Hoi Lee, University of Texas at Dallas, United States
WITHDRAWN
2013 IEEE Energy Conversion Congress & Exposition® • 53Technical Program Schedule | Oral Sessions
4:20 pm • A Comparison Between Dead-Beat And Predictive Control For A 7-level Back-To-Back Cascaded H-Bridge Under Fault ConditionsLuca Tarisciotti, Pericle Zanchetta, Alan Watson, Jon Clare and Stefano Bifaretti, University of Nottingham, United Kingdom; University of Rome “Tor Vergata”, Italy
4:45 pm • An Innovative Current Sensor-less Continuous Conduction Mode PFC ControlPeng Fang and Yan-Fei Liu, Queen’s University, Canada
S74 Magnetic Gears
Room: 207Chair: Kan Akatsu
3:30 pm • Slip Recovery and Prevention in Pseudo Direct Drive Permanent Magnet MachinesMohammed Bouheraoua, Jiabin Wang and Kais Atallah, Magnomatics Limited, United Kingdom, The University of Sheffield, United Kingdom
3:55 pm • Motor Integrated Permanent Magnet Gear in a Battery Electrical VehicleTommy Vestergaaard Frandsen, Laszio Mathe, Nick Ilsoe Berg, Rasmus Koldber Holm, Torben N. Matzen, Peter Omand Rasmussen and Kasper Koetter Jensen, Aalborg University, Denmark; Grundfos Holding A/S, Denmark
4:20 pm • Construction of a Low Speed Flux Focusing Magnetic GearKrishna K. Uppalapati, Walter Bomela, Jonathan Bird, Matthew Calvin and Jason Wright, University of North Carolina at Charlotte, United States
4:45 pm • Theoretical and Experimental Loss and Efficiency Studies of a Magnetic Lead ScrewNick Ilsoe Berg, Rasmus Koldborg Holm and Peter Omand Rasmussen, Aalborg University, Denmark
S75 Thermal Management
Room: 210/212Chair: Bram Ferreira
3:30 pm • Weight Optimization of a Cooling System Composed of Fan and Extruded Fin Heat SinkChristoph Gammeter, Florian Krismer and Johann W. Kolar, Swiss Institute of Technology, Switzerland
3:55 pm • Thermoelectric Cooling for Power Electronics Circuits: Small Signal Modeling and Controller DesignCong Li, Da Jiao, Jizhou Jia, Feng Guo and Jin Wang, The Ohio State University, United States
4:20 pm • A Real-Time Thermal Model for Monitoring of Power Semiconductor DevicesTanya Gachovska, Bo Tian, Jerry Hudgins, Wei Qiao and John Donlon, University of Nebraska-Lincoln, United States; Powerex. Inc., United States
4:45 pm • A Comparison of Thermal Vias Patterns used for Thermal Management in Power ConverterDeepak Gautam, Fariborz Musavi, Dale Wager and Murray Edington, Delta-Q Technologies Corp., Canada
Thursday, September 19 8:00 am – 9:40 am
S76 Wireless Power Transfer I
Room: 102Chair: Omer C. Onar
8:00 am • Design and Implementation of Removable and Closed-shape Dual Ring Pickup for Contactless Linear Inductive Power Track SystemJia-You Lee, Hung-Yu Shen and Kai-Chuan Chan, National Cheng Kung University, Taiwan
8:25 am • Frequency Splitting Analysis of Magnetically-Coupled Resonant Wireless Power TransferYiming Zhang, Zhengming Zhao and Kainan Chen, Tsinghua University, China
8:50 am • 8-Type Contactless Transformer Applied in Railway Inductive Power Transfer SystemMingshuo Li, Qianhong Chen, Jia Hou, Wenxian Chen and Xinbo Ruan, Nanjing University of Aeronautics and Astronautics, China
9:15 am • Impedance Transformers for Compact and Robust Coupled Magnetic Resonance SystemsEunsoo Lee, XuanVan Thai, Suyong Choi, Chuntaek Rim and Jin Huh, KAIST, Korea, (South)
S77 Power Quality
Room: 103/105Chair: Yunwei Li
8:00 am • Application of Matrix Pencil Method in Sub-cycle Voltage Dip ClassificationMeng Hwee Chia and Ashwin Khambadkone, National University of Singapore, Singapore
8:25 am • Electric Arc Furnace (EAF) Compensation Using LaGrange MinimizationLeonard White and Subhashish Bhattacharya, North Carolina State University, United States
8:50 am • Improvement of Conservation Voltage Reduction Energy Savings via Local Voltage RegulationArthur Barnes and Jim Simonelli, Gridco Systems, United States
9:15 am • Adaptive Notch Filter Applied to Hybrid Active Var Compensator under Nonsinusoidal and Unbalanced ConditionsSilvia Costa Ferreira, Luiz Gonzaga Fernandez Silvia, Robson Bauwelz Gonzatti, Carlos Henrique da Silva, Luiz Eduardo Borges da Silva and Germano Lambert-Torres, Federal University of Itajuba, Brazil; CPFL Energy, Brazil
S78 Wind Energy: DFIG Control and Operation
Room: 104/106Chair: Dan Ionel
8:00 am • Harmonic Analysis of Doubly Fed Induction Generator Based Utility Interactive Wind Turbine Systems During Fault ConditionsYusuf Yasa, Yilmaz Sozer and Erkan Mese, Yildiz Technical University, Turkey; University of Akron, United States
54 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Oral Sessions
8:25 am • Research on LVRT Capability of DFIG with Demagnetization ControlLinyuan Zhou, Jinjun Liu, Sizhan Zhou and Yangque Zhu, Xian Jiaotong University, China
8:50 am • Enhanced Operation for DFIG-based WECS using Resonant Feedback Compensators under Grid UnbalancePeng Cheng and Heng Nian, Zhejiang University, China
9:15 am • A Class of Flux Observers for Doubly-Fed Induction Generators used in Small Power Wind Generation SystemsCristian Lascu, Frede Blaabjerg, Ion Boldea and Wenjie Chen, University Politehnica of Timisoara, Romania; Aalborg University, Denmark; Zhejiang University, China
S79 Distributed Generation I
Room: 107/109Chair: Yogesh Patel
8:00 am • Coordinated Operation of Parallel-Connected Inverters for Active Islanding Detection Using High Frequency Signal InjectionFernando Briz, David Reigosa, Cristian Blanco and Juan Manuel Guerrero, University of Oviedo, Spain
8:25 am • Implementation and Control of a Residential Microgrid Based on Renewable Energy Sources, Hybrid Storage Systems and Thermal Controllable LoadsJulio Pascual, Idoia San Martin, Alfredo Ursua, Pablo Sanchis and Luis Marroyo, Public University of Navarre, Spain
8:50 am • Enhanced Power Quality Control Strategy for Paralleled Inverters in Distributed GenerationZhixiang Zou, Zheng Wang and Ming Cheng, Southeast University, China
9:15 am • An Effective Smooth Transition Control Strategy using Droop Based Synchronization for Parallel InvertersNayeem Arafat, Ali Elrayyah and Yilmaz Sozer, University of Akron, United States
S80 DC-DC Isolated II
Room: 108Chair: Hui Li
8:00 am • Rapid Push Pull Resonant Charger for High Power High Voltage Application Using Low Input VoltageEyal Rotman and Shmuel Ben-Yaakov, Rafael Advanced Defense Systems LTD, Israel; Ben-Gurion University of the Negev, Israel
8:25 am • Experimental Discussions on Operating Frequencies of a Bidirectional Isolated DC-DC Converter for a Battery Energy Storage SystemNadia Tan, Takahiro Abe and Hirofumi Akagi, Universiti Tenaga Nasional, Malaysia; JFE Steel Corporation, Japan; Tokyo Institute of Technology, Japan
8:50 am • A Modular DC-DC Converter with Collapsible Input Voltage of Series Connected Modules without Additional Bypass SwitchYeh Ting, Sjoerd de Haan and Jan Abraham Ferreira, Delft University of Technology, Netherlands
9:15 am • A LCL-Resonant Isolated Multiport DC-DC Converter for Power Management of Multiple Renewable Energy SourcesJianwu Zeng, Wei Qiao and Liyan Qu, University of Nebraska-Lincoln, United States
S81 AC-AC Converters
Room: 110/112Chair: Luca Zarri
8:00 am • A Novel Single-phase PWM AC-AC Converters Without Commutation ProblemHyunhak Shin, Honnyong Cha, Heung-Geun Kim and Dong-Wook Yoo, Kyungpook National Univ., Korea (South); Korea Electrotechnology Research Institute, Korea (South)
8:25 am • Design of 400V Class Inverter Drive Using SiC 6-in-1 Power ModuleKohei Shirabe, Mahesh Swamy, Jun-Koo Kang, Masaki Hisatsune, Mrinal Das, Robert Callanan and Henry Lin, Yaskawa America, Inc., United States; Cree, Inc., United States
8:50 am • A 3-phase Back-to-Back Converter for Reactive Power Compensation, Current Harmonic Filtering and Active Power CompensationJaneth Alcala, Victor Cardenas, Homero Miranda, Javier Perez-Ramirez and Saida Charre, Universidad de Colima, Mexico; UASLP, Mexico; ITSON, Mexico
9:15 am • In-situ Reconfiguration for Flexible Distribution of Energy and Storage ResourcesAjit Anbiah Renjit and Mahesh Illindala, The Ohio State University, United States
S82 Power Converters for Photovoltaics
Room: 111/113Chair: Toshihisa Shimizu
8:00 am • A Single-phase Grid-connected PV Converter with Minimal DC-link Capacitor and Low-frequency Ripple-free Maximum Power Point TrackingYuxiang Shi, Liming Liu, Hui Li and Yaosuo Xue, Florida State University, United States; Siemens Corporate Research, United States
8:25 am • Control Strategies for Utility-Scale Cascaded Photovoltaic SystemLiming Liu, Hui Li and Yaosuo Xue, Florida State University, United States; Siemens Corporate Research, United States
8:50 am • Nonlinear Control Design for the Photovoltaic Isolated-Port Architecture with Submodule Integrated ConvertersYoash Levron, Daniel Clement, Dragan Maksimovic and Carlos Olalla, University of Colorado at Boulder, United States; Universitat Rovira i Virgili, Spain
9:15 am • A High Efficiency and Reliability Single-phase Photovoltaic Micro-Inverter with High Magnetics Utilization for Nonisolated AC-Module ApplicationsBaifeng Chen, Bin Gu, Jih-Sheng Lai and Wensong Yu, Virginia Tech, United States
S83 Maximum Power Point Tracking I
Room: 201Chair: Eduard Muljadi
8:00 am • New Overall Control Strategy for Wind Energy Conversion Systems in MPPT and Stall RegionsZakariya Dalala, Zaka Ullah Zahid and Jih-Sheng Lai, Virginia Tech, United States
2013 IEEE Energy Conversion Congress & Exposition® • 55Technical Program Schedule | Oral Sessions
8:25 am • Small Wind Turbines Sensorless MPPT: Robustness Analysis and Lossless ApproachAndoni Urtasun, Pablo Sanchis and Luis Marroyo, Public University of Navarre, Spain
8:50 am • Maximum-Voltage-Unit-Guided MPPT Algorithm for Improved Performance under Partial ShadingTong Yao and Raja Ayyanar, Arizona State University, United States
9:15 am • High Efficient Variable step Size Incremental Resistance Maximum Power Point Tracker for PV Battery Charging ApplicationsEmad M. Ahmed, Mohamed Orabi and Masahito Shoyama, APEARC, Aswan University, Egypt; Kyushu University, Japan
S84 Power Converters for Electric Drives
Room: 203Chair: Zhiguo Pan
8:00 am • A Novel Indirect Quasi-Z-Source Matrix Converter Applied to Induction Motor DrivesShuo Liu, Baoming Ge, Xinjian Jiang, Haitham Abu-Rub and Fang Z. Peng, Beijing Jiaotong University, China; Michigan State University, United States; Tsinghua University, China; Texas A and M University at Qatar, Qatar
8:25 am • AC-AC 3-phase Drive System Based on Twelve-Leg DC-link ConverterCursino Jacobina, Nady Rocha, Gregory Carlos and Euzeli Santos Jr, Federal University of Campina Grande, Brazil; Federal University of Paraiba, Brazil; Federal Institute of Alagoas, Brazil; Indiana University-Purdue University Indianapolis, United States
8:50 am • Stability Analysis and Dynamic Response of a DC-link Module with a Series Voltage CompensatorHuai Wang, Wenchao Liu, Henry Shu-hung Chung and Frede Blaabjerg, Aalborg University, Denmark; City University of Hong Kong, Hong Kong
9:15 am • Single-phase Active Power Filtering Method Using Diode-Rectifier-Fed Motor DriveWook-Jin Lee, Yeongrack Son and Jung-Ik Ha, Seoul National University, Korea (South)
S85 Magnetic Bearings and Bearlingless Machines
Room: 205Chair: Elena Lomonova
8:00 am • Design and Test Result of Novel Single-Drive Bearingless Motor with Cylindrical Radial GapHiroya Sugimoto, Seiyu Tanaka, Akira Chiba and Junichi Asama, Tokyo Institute of Technology, Japan; Shizuoka University, Japan
8:25 am • A Principle and A Test Result of A Novel Bearingless Motor With Motor Parallel Winding StructureAkira Chiba, Satoshi Horima and Hiroya Sugimoto, Tokyo Institute of Technology, Japan
8:50 am • Suitability Investigation of a Bearingless Disk Drive for Micro Turbine ApplicationsHubert Mitterhofer, Branimir Mrak and Wolfgang Amrhein, Linz Center of Mechatronics GmbH, Austria; Johannes Kepler University Linz, Austria
9:15 am • Compact and Low Cost Magnetic Bearing with Saturated Coil for Gas Turbine GeneratorsVan Xuan Thai, Bohwan Choi, Suyong Choi, Seungjin Yoo and Chuntaek Rim, KAIST, Korea, (South)
S86 Diagnostics and Fault Analysisof Electric Machines I
Room: 207Chair: Marques Cardoso
8:00 am • A Novel High Sensitivity Differential Current Transformer for Online Health Monitoring of Industrial Motor Ground-wall InsulationPrabhakar Neti, Karim Younsi and Manoj Shah, GE Global Research Center, United States
8:25 am • Interior Permanent Magnet Synchronous Machine Rotor Demagnetization Characteristics under Fault ConditionsGilsu Choi and Thomas Jahns, University of Wisconsin - Madison, United States
8:50 am • Reliable Detection of Induction Motor Rotor Faults under the Rotor Axial Air Duct InfluenceChanseung Yang, Tae-June Kang, Doosoo Hyun, Sang Bin Lee, Jose Antonino-Daviu and Joan Pons-Llinares, Korea University, Korea, (South); Polytechnic University of Valencia, Spain
9:15 am • Fault Type Detection using Frequency Pattern of Stator Current in IPM-type BLDC Motor under Stator Inter-turn, Dynamic Eccentricity, and Coupled FaultsJun-Kyu Park, Il-Man Seo and Jin Hur, University of Ulsan, Korea (South)
S87 Converter-level Power ElectronicDevice Integration
Room: 210/212Chair: Jerry Hudgins
8:00 am • Evaluation of 15 kV SiC N-IGBT and P-IGBT for Complementary Inverter Topology with Zero dV/dT Stress on Gate DriversArun Kadavelugu, Subhashish Bhattacharya, Sei-Hyung Ryu, Dave Grider, Anant Agarwal and Scott Leslie, North Carolina State University, United States; Cree, Inc, United States; U.S., Department of Energy, United States; Powerex, Inc, United States
8:25 am • Characterization of 15 kV SiC n-IGBT and its Application Considerations for High Power ConvertersArun Kadavelugu, Subhashish Bhattacharya, Sei-Hyung Ryu, Edward Van Brunt, Dave Grider, Anant Agarwal and Scott Leslie, North Carolina State University, United States; Cree, Inc, United States; Dept. of Energy, United States; Powerex, Inc, United States
8:50 am • A Gate Assist Circuit for Cross Talk Suppresion of SiC Devices in a Phase-leg ConfigurationZheyu Zhang, Fred Wang, Leon M. Tolbert and Benjamin J. Blalock, University of Tennessee, United States
9:15 am • Validation of the Plug-and-play AC-AC Power Electronics Building Block (AC-PEBB) for Medium Voltage Grid Control ApplicationsAmrit Iyer, Rohit Moghe, Rajendra Kandula, Jorge E. Hernandez and Deepak Divan, Georgia Institute of Technology, United States
56 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Oral Sessions
Thursday, September 19 10:00 am – 11:40 am
S88 Wireless Power Transfer II
Room: 102Chair: Fernando Briz
10:00 am • Analysis and Control of S/SP Compensation Contactless Resonant Converter with Constant Voltage GainJia Hou, Qianhong Chen, Kaiqin Yan, Xiaoyong Ren, Siu-Chung Wong and Chi.K Tse, Nanjing University of Aeronautics and Astronautics, China; Hong Kong Polytechnic University, China
10:25 am • A Novel Fast-switching Control for Multiple Pickup IPT SystemsLiang Chen, John Boys and Grant Covic, University of Auckland, New Zealand
10:50 am • Contactless Slipring System based on Rotating Magnetic Field Principle for Rotary ApplicationsAli Abdolkhani, Aiguo Patrick Hu, Grant Covic and Mahsa Moridnejad, University of Auckland, New Zealand
11:15 am • Experimental Verifications and Design Procedure of an AC-DC Converter with Input Impedance Matching for Wireless Power Transfer SystemsKeisuke Kusaka and Jun-ichi Itoh, Nagaoka University of Technology, Japan
S89 HVDC and FACTS
Room: 103/105Chair: Leila Parsa
10:00 am • Multi-module Bidirectional Buck-boost Inverter-based HVDC Back-to-back Transmission SystemAhmed Elserougi, Ayman Abdel-Khalik, Ahmed Massoud and Shehab Ahmed, Alexandria University, Egypt; Qatar University, Qatar; Texas A and M University at Qatar, Qatar
10:25 am • Power Flow Router Sensitivities for Post-contingency Corrective ControlJames Jamal Thomas, Jorge Hernandez and Santiago Grijalva, Georgia Institute of Technology, United States
10:50 am • Experimental Validation of Modular Transformer Converter Based Convertible Static Transmission Controller for Transmission Grid ManagementNima Yousefpoor, Babak Parkhideh, Ali Azidehak and Subhashish Bhattacharya, North Carolina State University, United States; University of North Carolina - Charlotte, United States
11:15 am • A Control Structure for Line-frequency-switched STATCOMs under System FaultsSaman Babaei and Subhashish Bhattacharya, North Carolina State University, United States
S90 Wind Farm Connection
Room: 104/106Chair: Yao Duan
10:00 am • A Boost Conversion System Consisting of Multiple DC-DC Converter Modules for Interfacing Wind Farms and HVDC TransmissionKenichiro Sano and Masahiro Takasaki, Central Research Inst. of Electric Power Ind., Japan; Tokyo University of Science, Japan
10:25 am • An Adaptive Phase-Locked Loop Algorithm for Faster Fault Ride Through Performance of Interconnected Renewable Energy SourcesLenos Hadjidemetriou, Elias Kyriakides and Frede Blaabjerg, University of Cyprus, Cyprus; Aalborg University, Denmark
10:50 am • Comprehensive Modeling of Turbine Systems from Wind to Electric GridBora Novakovic, Yao Duan, Mark Solveson, Adel Nasiri and Dan Ionel, University of Wisconsin, Milwaukee, United States; ANSYS, United States
11:15 am • Multi-megawatt Wind Turbine Converter Configurations Suitable for Off-shore Applications, Combining 3-L NPC PEBBsJavier Chivite Zabalza, Igor Larrazabal, Ignacio Zubimendi, Sergio Aurtenetxea and Mikel Zabaleta, Ingeteam Power Technology, Spain
S91 Distributed Generation II
Room: 107/109Chair: Peter Liu
10:00 am • Synchronization in Highly Distorted 3-phase Grids using Selective Notch FiltersCristian Blanco, David Reigosa, Fernando Briz and Juan Manuel Guerrero, University of Oviedo, Spain
10:25 am • Islanding Detection in Grid-connected Power Converters using Harmonics due to the Non-ideal Behavior of the InverterDavid Reigosa, Fernando Briz, Cristian Blanco and Juan Manuel Guerrero, University of Oviedo, Spain
10:50 am • Decentralized Control of MTDC Networks with Energy Storage and Distributed GenerationCatalin Gavriluta, Ignacio Candela, Costantino Citro, Alvaro Luna and Pedro Rodriguez, Technical University of Catalonia, Spain; Abengoa Research, Spain
11:15 am • Control System Tuning and Stability Analysis of Virtual Synchronous MachinesSalvatore D’Arco, Jon Are Suul and Olav B. Fosso, SINTEF Energy Research, Norway; Norwegian University of Science and Technology, Norway
S92 Converter Applications
Room: 108Chair: Zach Pan
10:00 am • Miniature Self-powered Stick-on Wireless Sensor Node for Monitoring of Overhead Power LinesQiliang Xu, Rafael Send, Igor Paprotny, Richard White and Paul Wright, University of California, Berkeley, United States
10:25 am • A Low-cost Electric-field Energy Harvester for an MV/HV Asset-monitoring Smart-sensorRohit Moghe, Amrit Iyer, Frank Lambert and Deepak Divan, Georgia Institute of Technology, United States
10:50 am • Design and Analysis of Integrated Driver for Piezoelectric ActuatorsMario Lok, David Brooks, Rob Wood and Gu-Yeon Wei, Harvard University, United States
11:15 am • A Low Power Consumption Driver with Low Acoustics for Piezoelectric Synthetic JetsRamanujam Ramabhadran, John Glaser and H. Peter de Bock, General Electric Global Research Center, United States
2013 IEEE Energy Conversion Congress & Exposition® • 57Technical Program Schedule | Oral Sessions
S93 Matrix Converters
Room: 110/112Chair: Lee Empringham
10:00 am • Comparison of 3-phase AC-AC Matrix Converter and Voltage DC-link Back-to-back Converter Topologies Based on EMI FilterBo Wen, Xuning Zhang, Qiong Wang, Rolando Burgos, Paolo Mattavelli and Dushan Boroyevich, Virginia Tech, United States; DTG-University of Padova, Italy
10:25 am • Efficiency and Damping Control Evaluation of a Matrix Converter with a Boost-up AC Chopper in Adjustable Speed Drive SystemKazuhiro Koiwa and Jun-ichi Itoh, Nagaoka University of Technology, Japan
10:50 am • New Control Strategy for Indirect Matrix Converters Operating in Boost ModeAndres Escobar-Mejia, Jonathan Hayes, Juan Carlos Balda and Claudio Busada, University of Arkansas, United States; Universidad Nacional del Sur, Argentina
11:15 am • A Modulation Strategy for Matrix Converter with Extended Control Range and Reduced Switching Power LossesMichele Mengoni, Luca Zarri, Angelo Tani, Giancarlo Rini, Giovanni Serra and Domenice Casadei, University of Bologna, Italy
S94 Single Phase DC to AC Inverters I
Room: 111/113Chair: Pierluigi Tenca
10:00 am • Novel Soft-switching Snubberless Naturally Clamped Current-fed Full-bridge Front-end Converter Based Bidirectional Inverter for Renewable, Microgrid, and UPS ApplicationsPan Xuewei, Akshay Rathore and Udupi R. Prasanna, National University of Singapore, Singapore; University of Texas at Dallas, United States
10:25 am • A Soft-switching Full-bridge Inverter with High EfficiencyYenan Chen, Guangcheng Hu, Chengrui Du, Min Chen and Dehong Xu, Zhejiang University, China
10:50 am • Impedance Design of Quasi-Z Source Network to Limit Double Fundamental Frequency Voltage and Current Ripples in Single-phase Quasi-Z Source InverterDongsen Sun, Baoming Ge, Xingyu Yan, Daqiang Bi, Haitham Abu-Rub and Fang Z. Peng, Beijing Jiaotong University, China; Michigan State University, United States; Tsinghua University, China; Texas A and M University at Qatar, Qatar
11:15 am • Current-fed DC-DC Topology Based InverterSoumya Shubhra Nag and Santanu Mishra, Indian Institute of Technology, Kanpur, India
S95 Maximum Power Point Tracking II
Room: 201Chair: Pedro Rodriguez
10:00 am • Current-sensorless Power-angle-based MPPT for Single-stage Grid-connected Photovoltaic Voltage-source InvertersGamal M. Dousoky and Masahito Shoyama, Minia University, Egypt; Kyushu University, Japan
10:25 am • Maximum Power Point Tracking Algorithm with Advanced State Detection and Regression Method for Small Wind Energy SystemsJoanne Hui, Alireza Bakhshai and Praveen K. Jain, Queen’s University, Canada
10:50 am • A Maximum Power Point Tracking Method for PV Systems Supplying a Periodic Nonlinear LoadChung-Ti Hsu, Peng Li, Su Sheng and Brad Lehman, Northeastern University, United States
11:15 am • A Distributed Approach to MPPT for PV Sub-module Differential Power ProcessingShibin Qin, Stanton Cady, Alejandro Dominguez-Garcia and Robert C.N. Pilawa-Podgurski, University of Illinois at Urbana-Champaign, United States
S96 Drive Topologies and Packaging for Hybrid and Electric Vehicles
Room: 203Chair: Chandra Namuduri
10:00 am • A High Temperature Traction Inverter with Reduced Cooling and Improved Efficiency for HEV ApplicationsZhuxian Xu, Fan Xu, Dong Jiang, Wenchao Cao and Fred Wang, University of Tennessee, United States; United Technologies Research Center, United States
10:25 am • A Variable Voltage Converter with Direct Bypass for Traction Drive InvertersLihua Chen, Ford Motor Company, United States
10:50 am • An Inverter Packaging Scheme for an Integrated Segmented Traction Drive SystemGui-Jia Su, Lixin Tang, Curt Ayers and Randy Wiles, Oak Ridge National Laboratory, United States
11:15 am • Low Voltage and High Power DC-AC Inverter Topologies for Electric VehiclesRashidreza Karimi, Thies Koeneke, Dennis Kaczorowski, Timur Werner and Axel Mertens, Leibniz University of Hannover, Germany
S97 Noise and Vibration in Electric Machines
Room: 205Chair: Long Wu
10:00 am • Analytical Expression of Pulsating Torque harmonics due to PWM DrivesJoseph Song-Manguelle, Gabriel Ekemb, Stefan Schroeder, Tobias Geyer, Jean Maurice Nyobe-Yome and Rene Wamkeue, ExxonMobil, United States; University of Quebec in Chicoutimu, Canada; GE Global Research, Germany; ABB, Switzerland; University of Douala, Cameroon; University of Quebec in Abiti-Temiscamingue, Canada
10:25 am • Suppression Control of Radial Force Vibration due to Fundamental Permanent-magnet Flux in IPMSMMasato Kanematsu, Takayuki Miyajima, Hiroshi Fujimoto, Yoichi Hori, Toshio Enomoto, Masahiko Kondou, Hiroshi Komiya, Kantaro Yoshimoto and Takayuki Miyakawa, University of Tokyo, Japan; Nissan Motor Co., LTD., Japan
10:50 am • Multi-physics Analysis of Double Stator Switched Reluctance MachinesArash Hassanpour Isfahani and Babak Fahimi, University of Texas at Dallas, United States
58 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Oral Sessions
11:15 am • Influence of Pole and Slot Number Combinations on Cogging Torque in Permanent Magnet Machines with Static and Rotating EccentricitiesZi-Qiang Zhu, L.J. Wu and M.L. Mohd Jamil, University of Sheffield, United Kingdom
S98 IPM Machines II
Room: 207Chair: Patel Reddy
10:00 am • Multi-objective Tradeoffs in the Design Optimization of a Brushless Permanent Magnet Machine with Fractional-slot Concentrated WindingsPeng Zhang, Gennadi Sizov, Muyang Li, Dan Ionel, Nabeel Demerdash, Steven Stretz and Alan Yeadon, Marquette University, United States; Regal Beloit Corporation, United States
10:25 am • Circulating Current in Parallel Connected Stator Windings due to Rotor Eccentricity in Permanent Magnet MotorsEri Maruyama, Akeshi Takahashi, Akihito Nakahara and Kenji Miyata, Hitachi, Ltd., Japan
10:50 am • Impact of Interior Permanent Magnet Rotor Design on Signal Injection Based Sensorless Control and Power ConversionIan P. Brown, Gennadi Y. Sizov and Laura E. Brown, Illinois Institute of Technology, United States; Marquette University, United States; Michigan Technological University, United States
11:15 am • Design and Control of IPMSM Sensorless Drive for Mechanical Rotor Position Detection CapabilityYong-Cheol Kwon, Seung-Ki Sul, Noor Aamir Baloch, Sohji Murakami and Shinya Morimoto, Seoul National University, Korea (South); Yaskawa Electric Corporation, Japan
S99 Power Electronic Modules III
Room: 210/212Chair: Yehui Han
10:00 am • Gate Drive Investigations of IGBT Modules with SiC-Schottky Freewheeling DiodesNa Ren, Kuang Sheng, Junming Zhang and Fangzheng Peng, Zhejiang University, China; Michigan State University, United States
10:25 am • A High Temperature, Double-sided Cooling SiC Power Electronics ModuleHao Zhang, Simon Ang, Alan Mantooth and Shashank Krishnamurthy, UARK, United States; United Technologies Research Center, United States
10:50 am • Advanced Packaging of SiC Power Module for Automotive ApplicationsZhenxian Liang, Puqi Ning and Fred (Fei) Wang, Oak Ridge National Laboratory, United States; University of Tennessee, United States
11:15 am • Anti-series Normally-on SiC JFETs Operating as Bidirectional SwitchesMahmood Saadeh, Madu Chinthavali, Burak Ozpineci and Alan Mantooth, Oak Ridge National Laboratory, United States; University of Arkansas, United States
Thursday, September 19 1:30 pm – 3:10 pm
S100 Wireless Power Transfer III
Room: 102Chair: Thomas Jahns
1:30 pm • Analysis and Comparison of Secondary Series- and Parallel-Compensated IPT SystemsWei Zhang, Siu-Chung Wong, Chi K. Tse and Qianhong Chen, Hong Kong Polytechnic University, Hong Kong; Nanjing University of Aeronautics and Astronautics, China
1:55 pm • Wireless Fleet Charging System for Electric BicyclesHui Zhi (Zak) Beh, Grant Covic and John Boys, University of Auckland, New Zealand
2:20 pm • Inductive Power Transfer by Means of Multiple Frequencies in the Magnetic LinkZeljko Pantic, Kibok Lee and Srdjan Lukic, North Carolina State University, United States
2:45 pm • Self-oscillating Contactless Resonant Converter with Phase Detection Contactless Current TransformerKaiqin Yan, Qianhong Chen, Jia Hou, Wenxian Chen, Xiaoyong Ren and Xinbo Ruan, Nanjing University of Aero. and Astro., China
S101 Grid Connected Converters I
Room: 103/105Chair: Pedro Rodriguez
1:30 pm • Analysis on Capability of Harmonic Damping Using Active Filter Acting as Resistive Harmonic ImpedanceKhairul Nisak Md Hasan, Alvaro Luna, J. Ignacio Candela and Pedro Rodriguez, Technical University of Catalonia, Spain, Universiti Teknologi PETRONAS, Malaysia
1:55 pm • Anti-islanding Detector based on a Robust PLLStefano Bifaretti, University of Rome Tor Vergata, Italy
2:20 pm • Auto-tuning based Resonance Damping of Gridconnected Voltage Source Inverters with Long Transmission CableShao Zhang, Shuai Jiang, Xi Lu, Baoming Ge and Fang Zheng Peng, Michigan State University, United States
2:45 pm • Test Bed Implementation of 380V DC Distribution System Using Isolated Bidirectional Power ConvertersMyung-Hyo Ryu, Hosung Kim, Jonghyun Kim, Juwon Baek and Jee-Hoon Jung, Korea Electrotechnology Research Institute, Korea (South); Ulsan National Institute of Science Technology, Korea (South)
S102 Wind Energy Converters
Room: 104/106Chair: Frede Blaabjerg
1:30 pm • Nonlinear Control of Wind Energy Conversion System Based on Control-Lyapunov FunctionJonathan Mash, Majid Pahlevaninezhad and Praveen Jain, Queen’s University, Canada
1:55 pm • Lifetime Estimation for the Power Semiconductors Considering Mission Profiles in Wind Power ConverterKe Ma, Marco Liserre and Frede Blaabjerg, Aalborg University, Denmark
2013 IEEE Energy Conversion Congress & Exposition® • 59Technical Program Schedule | Oral Sessions
2:20 pm • Current-based Eccentricity Detection for Direct-drive Wind Turbines via Synchronous SamplingXiang Gong and Wei Qiao, General Motors Technical Center, United States; University of Nebraska-Lincoln, United States
2:45 pm • Permanent-magnet Synchronous-generator Wind-energy Systems with Boost Matrix ConvertersEkrem Karaman, Mehdi Farasat and Andrzej Trzynadlowski, University of Nevada, Reno, United States
S103 Distributed Generation III
Room: 107/109Chair: Behrooz Mirafzal
1:30 pm • On the Use of Real-time Simulation Technology in Smart Grid Research and DevelopmentChristian Dufour and Jean Belanger, Opal-RT Technologies, Canada
1:55 pm • Parameter Design and Impacts on Power Quality of a Q-f Droop Curve Based Islanding Detection MethodLing Jiang, Wen Cai, Bangyin Liu, Shanxu Duan and Changyue Zou, Huazhong University of Science and Technology, China
2:20 pm • Reactive Power Scheduler for Voltage Regulation of Distributed Energy SystemsAli Safayet, Iqbal Husain and Yilmaz Sozer, North Carolina State University, United States; University of Akron, United States
2:45 pm • Broadband Methods for Online Grid Impedance MeasurementTomi Roinila, Matti Vilkko and Jian Sun, Rensselaer Polytechnic Institute, United States; Tampere University of Technology, Finland
S104 AC-DC Multi-phase II
Room: 108Chair: Qiang Li
1:30 pm • Discrete-time One Cycle Control of VIENNA Rectifiers Considering the DC-link Neutral-point Voltage BalanceYumei Li, Xiaoming Zha, Fei Liu and Leping Bu, Wuhan University, China; Naval University of Engineering, China
1:55 pm • Evaluation of LCL Filter Inductor and Active Front End Rectifier Losses Under Different PWM MethodLixiang Wei, Yogesh Patel and C.S.N. Murthy, Rockwell Automation, United States, L&T Technology, United States
2:20 pm • Optimization and Comparison of Two Soft Switched High Voltage Converter Modulator TopologiesChao Ji, Alan Watson, Pericle Zanchetta, Michael Bland, Jon Clare, Patrick Wheeler and William Reass, University of Nottingham, United Kingdom; Los Alamos National Laboratory, United States
2:45 pm • Comparative Evaluation of SiC Devices for PWM Buck Rectifier Based Active Front End Converter for MV Grid InterfaceSachin Madhusoodhanan, Yonghwan Cho, Arun Kadavelugu, Subhashish Bhattacharya, Dave Grider, Sei-Hyung Ryu, Anant Agarwal and Scott Leslie, North Carolina State University, United States; Cree, Inc, United States; US Department of Energy, United States; Powerex Inc, United States
S105 Multilevel Converters II
Room: 110/112Chair: Tobias Geyer
1:30 pm • A Concept of Multi-level Converter Building Modules to Realize Higher Number of Output LevelsHidemine Obara and Yukihiko Sato, Chiba University, Japan
1:55 pm • Scaling the Controllable Network Transformer (CNT) to Utility-level Voltages with Direct-AC-AC Power Electronic Building Blocks (PEBBs)Amrit Iyer, Rajendra Kandula, Rohit Moghe, Frank Lambert and Deepak Divan, Georgia Institute of Technology, United States
2:20 pm • Bidirectional Three Port, 3-phase Multilevel Inverter Based on Switched Capacitor CellsMark Scott, Ernest Davison, Cong Li, Rachid Darbali-Zamora, Ramiro Duarte, Xintong Lu, Titus Chen, Feng Guo and Jin Wang, The Ohio State University, United States; The University of Puerto Rico, United States
2:45 pm • Low-voltage-ride-through (LVRT) Capability of a Phase-shifted-PWM STATCOM Using the Modular Multilevel Cascade Converter Based on Single-star Bridge-cells (MMCC-SSBC)Joao Inacio Yutaka Ota, Yuji Shibano and Hirofumi Akagi, Tokyo Institute of Technology, Japan
S106 Single Phase DC to AC Inverters II
Room: 111/113Chair: Stefano Bifaretti
1:30 pm • A Multilevel Energy Buffer and Voltage Modulator for Grid-interfaced Micro-invertersMinjie Chen, Khurram Afridi and David Perreault, Massachusetts Institute of Technology, United States
1:55 pm • Quasi Variable Capacitor Applied to Soft Switching Inverter for Induction HeatingSachio Kubota, Fumio Ito and Yoshihiro Shimaoka, Toba National College of Maritime Technology, Japan
2:20 pm • Common-mode Voltage Reduction Method of PWM Current Source Inverter Modifying the Distribution of Zero CurrentYushi Takatsuka, Katsutoshi Yamanaka and Hidenori Hara, Yaskawa Electric Corporation, Japan
2:45 pm • A Single-phase Current Source PV Inverter with Power Decoupling Capability using an Active BufferYoshiya Ohnuma, Koji Orikawa and Jun-ichi Itoh, Nagaoka University of Technology, Japan
S107 Lighting Technologies I
Room: 201Chair: Henry Chung
1:30 pm • A Review and Classification of LED BallastsSinan Li, Siew Chong Tan, S.Y.(Ron) Hui and Chi K. Tse, The University of Hong Kong, Hong Kong; Hong Kong Polytechnic University, Hong Kong
1:55 pm • A High-Frequency Digitally Controlled LED Driver for Automotive Applications with Fast Dimming CapabilitiesLuca Corradini and Giorgio Spiazzi, University of Padova, Italy
60 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Oral Sessions
2:20 pm • Daisy-Chain Transformer Structure for Current-Balancing Multiple LED StringsRuihong Zhang and Henry Shu-hung Chung, City University of Hong Kong, Hong Kong
2:45 pm • A Dimmable LED Driver Using Resistive DAC Feedback Control for Adaptive Voltage RegulationLukas Lohaus, Arne Rossius, Stefan Dietrich, Ralf Wunderlich and Stefan Heinen, RWTH Aachen University, Germany
S108 Energy Efficient Motor Drives
Room: 203Chair: Brij N Singh
1:30 pm • Energy Saving Start-up Method by Combined Use of Two Position Sensorless ControlsTakahiro Suzuki, Yuichi Shimizu, Yoshitaka Iwaji, Shigehisa Aoyagi and Ryoichi Takahata, Hitachi, Ltd., Japan; Hitachi Appliances, Inc., Japan
1:55 pm • Maximum Efficiency Drives of Synchronous Reluctance Motors with On-Line Stator Resistance EstimatorShu Yamamoto, Hideaki Hirahara, Akira Tanaka, Takahiro Ara and Kouki Matsuse, Polytechnic University, Japan; Tokyo Metropolitan University, Japan; Meiji University, Japan
2:20 pm • Multi-mode Control Strategy in Small-scale Wind Turbine Generators for Wider Operating Speed Range and Higher Efficiency OperationLujie Chen, Wen Soong and Nesimi Ertugrul, University of Adelaide, Australia
2:45 pm • Numerical Design Methodology of Optimal Trajectories for Efficient Induction Motor Drive based on a Loss MapKaoru Inoue, Naoya Okada, Hiroki Kiyose and Toshiji Kato, Doshisha University, Japan
S109 Norio Takahashi Memorial Session:Losses in Electrical Machines
Room: 205Chair: David Dorrell
1:30 pm • Analysis of the Temperature Dependence of Losses in Electrical MachinesJoerg Schuetzhold and Wilfried Hofmann, Technical University Dresden, Germany
1:55 pm • Impact of Dead-time on Iron Losses in Inverter-fed Magnetic MaterialsSeyed Mohammad Dehghan and Keisuke Fujisaki, Toyota Technological Institute, Japan
2:20 pm • The Minor Hysteresis Loop under Rotating Magnetic Fields in Machine LaminationsNatheer Alatawneh and Pragasen Pillay, Concordia University, Canada
2:45 pm • A Combined Hysteresis and Eddy-current Model Developed for a Wide Frequency Range in Electric Machine ApplicationsReinhard Woehrnschimmel, Christian Kral, Florian Muellner, Stefan Wild, Harald Neudorfer and Friedrich Dangl, Austrian Institute of Technology GmbH, Austria; Traktionssysteme Austria GmbH, Austria
S110 Axial Flux Machines
Room: 207Chair: Jessica Colton
1:30 pm • Operation Characteristics of Ferrite Permanent Magnet In-wheel Axial-gap Motor with Coreless Rotor Structure for Electric City CommutersKodai Sone, Masatsugu Takemoto, Satoshi Ogasawara, Kenichi Takezaki and Wataru Hino, Hokkaido University, Japan; Dynax Corporation, Japan
1:55 pm • Omega Shaped Axial-flux Permanent-magnet Machine for Direct-drive Applications with Constrained Shaft HeightGiulio De Donato, Fabio Giulii Capponi, Gabriele Borocci, Federico Caricchi, Luigi Beneduce, Luigi Fratelli and Antonio Tarantino, University of Roma “La Sapienza”, Italy; AnsaldoBreda S.p.A., Italy
2:20 pm • FEA Estimation and Experimental Validation of Solid Rotor and Magnet Eddy Current Loss in Single-sided Axial Flux Permanent Magnet MachinesXu Yang, Dean Patterson, Jerry Hudgins and Jessica Colton, University of Nebraska Lincoln, United States; Boulder Wind Power, United States
2:45 pm • Line-start Axial-flux Permanent-magnet Synchronous MotorAmin Mahmoudi, Solmaz Kahourzade, Mohammad Nasir Uddin, Nasrudin Abd Rahim and Wooi Ping Hew, University of Malaya, Malaysia; Lakehead University, Canada
S111 Wide Bandgap Semiconductors III
Room: 210/212Chair: Robert Pilawa
1:30 pm • A 3600V 80A Single External-driver Series Connected Circuit with Three Silicon Carbide MOSFETsShidong Cheng, Yizhe Huang, Xinke Wu and Kuang Sheng, Zhengjiang University, China; Zhejiang University, China
1:55 pm • Performance Consideration of an AC Coupled Gate Drive Circuit With Forward Bias for Normally-on SiC JFETsGeorgios Kampitsis, Stavros Papathanassiou and Stefanos Manias, National Technical University of Athens, Greece
2:20 pm • Performance Comparison of 1200V 100A SiC MOSFET and 1200V 100A Silicon IGBTGangyao Wang, Fei Wang, Gari Magai, Yang Lei, Alex Huang and Mrinal Das, North Carolina State University, United States; Cree, Inc., United States
2:45 pm • High-temperature Characterization and Comparison of 1.2 kV SiC Power MOSFETsChristina DiMarino, Zheng Chen, Milisav Danilovic, Dushan Boroyevich, Rolando Burgos and Paolo Mattavelli, Virginia Polytechnic Institute and State University, United States
2013 IEEE Energy Conversion Congress & Exposition® • 61Technical Program Schedule | Oral Sessions
Thursday, September 19 3:30 pm – 5:10 pm
S112 Wireless Power Transfer IV
Room: 102Chair: Robert Lorenz
3:30 pm • High Efficiency Contactless Power Transfer System for Electric Vehicle Battery Charging ApplicationCong Zheng, Rui Chen, William Eric Faraci, Zaka Ullah Zahid, Matthew Senesky, Dave Anderson, Jih-Sheng Lai, Wensong Yu and Chien-Yu Lin, Virginia Tech, United States; Texas Instruments Incorporated, United States; National Taiwan University of Science and Tech, Taiwan
3:55 pm • Vehicle-to-Grid Scheme Based on Inductive Power Transfer for Advanced Distribution AutomationPirooz Javanbakht, Salman Mohagheghi, Babak Parkhideh, Sumit Dutta, Ritwik Chattopadhyay and Subhashish Bhattacharya, Colorado School of Mines, United States; University of North Carolina - Charlotte, United States; North Carolina State University, United States
4:20 pm • Single-phase Active Boost Rectifier with Power Factor Correction for Wireless Power Transfer ApplicationsMadhu Sudhan Chinthavali, Omer Onar, John Miller and Lixin Tang, Oak Ridge National Laboratory, United States
4:45 pm • Optimal Design Method to Achieve Both Good Robustness and Efficiency in Loosely-coupled Wireless Charging System Employing Series-Parallel Resonant Tank with Asymmetrical Magnetic CouplerIsaac Nam, Roger Dougal and Enrico Santi, University of South Carolina, United States
S113 Grid Connected Converters II
Room: 103/105Chair: Sheldon Williamson
3:30 pm • Forward-type Micro-inverter with Current DecouplingChien-Yao Liao, Wen-Shiun Lin, Kai-Shin Chen, Yaow-Ming Chen and Cheng-Yen Chou, National Taiwan University, Taiwan; Darfon Electronic Corporation, Taiwan
3:55 pm • Inverter Control Strategy for DG Systems based on the Conservative Power TheoryDanilo Brandao, Fernando Marafao, Helmo Paredes and Alessandro Costabeber, State University of Campinas, Brazil; Unesp - Univ Estadual Paulista, Brazil; University of Padova, Italy
4:20 pm • 15 kV SiC IGBT based 3-phase, 3-level, Modular-leg Power ConverterDhaval Patel, Arun Kadavelugu, Sachin Madhusoodhanan, Subhashish Bhattacharya, Kamalesh Hatua, Scott Leslie, Sei-Hyung Ryu, Dave Grider and Anant Agarwal, North Carolina State University, United States; Indian Institute of Technology Madras, India; Powerex, Inc, United States; Cree, Inc, United States; DOE, United States
4:45 pm • Grid Harmonics and Voltage Unbalance Effect Elimination for 3-phase PLL Grid Synchronization AlgorithmAli Safayet, Iqbal Husain, Ali Elrayyah and Yilmaz Sozer, North Carolina State University, United States; University of Akron, United States
S114 Wind Energy Technologies
Room: 104/106Chair: David Dorrell
3:30 pm • Variable Speed Wind Power Plant Operating with Reserve Power CapabilityMohit Singh, Vahan Gevorgian, Eduard Muljadi and Erik Ela, National Renewable Energy Laboratory, United States
3:55 pm • Modeling of a Hydraulic Wind Power Energy Transfer System Utilizing a Proportional ValveMajid Deldar, Afshin Izadian and Sohel Anwar, Purdue School of Engineering Indianapolis, United States
4:20 pm • Estimation of Wake Effect in Wind Farms Using Design of Experiment MethodologyAmir Tahavorgar and John E. Quaicoe, Memorial University of Newfoundland, Canada
4:45 pm • Analysis of Grid Current Control in Consideration of Voltage Feedforward and Cable Capacitance Demonstrated on a Fully Sized Wind Turbine Installed in a Wind ParkFelix Fuchs, Viet Pham and Axel Mertens, Leibniz Universitaet Hannover, Germany
S115 AC-DC Multi-phase III
Room: 107/109Chair: Akshay Kumar Rathore
3:30 pm • Control Algorithm of High Power Rectifier System in DC Arc Furnace for Improved Arc StabilityKyungsub Jung, Yongsug Suh, Taewon Kim, Taejun Park and Yongjoong Lee, Chonbuk National University, Korea (South); RIST, POSCO, Korea (South); Paul Scherrer Institute, Switzerland
3:55 pm • A Generalized DQ Impedance Model of 3-phase Diode RectifierQin Lei, Sisheng Liang, Fang Zheng Peng, Miaosen Shen and Vladimir Blasko, Michigan State University, United States; United Technologies Research Center, United States
4:20 pm • DC-link Current Control Scheme for Paralleled 3-phase Current Source Rectifiers in High Efficiency Power Supply SystemFan Xu, Ben Guo, Zhuxian Xu, Leon Tolbert, Fred Wang and Benjamin Blalock, University of Tennessee, United States
4:45 pm • Analysis of Nonlinear Sideband Effects in Small-signal Input dq Admittance of Twelve-pulse Diode RectifiersMarko Jaksic, Zhiyu Shen, Igor Cvetkovic, Dushan Boroyevich, Rolando Burgos and Paolo Mattavelli, Virginia Tech, United States; University of Padova, Italy
62 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Oral Sessions
S116 Modular Multilevel Converters
Room: 108Chair: Pierluigi Tenca
3:30 pm • Modular Multilevel Converter based on Current Source H-bridge cells implemented with low cost Reversing Conducting IGCTRicardo Lizana, Marcelo Perez, Jose Rodriguez and Bin Wu, Universidad Tecnica Federico Santa Maria, Chile; Ryerson University, Canada
3:55 pm • Optimal Selection of the Average Capacitor Voltage for Modular Multilevel ConvertersAntonios Antonopoulos, Lennart Angquist, Lennart Harnefors and Hans-Peter Nee, KTH Royal Institute of Technology, Sweden
4:20 pm • Development of a 500-kW Modular Multilevel Cascade Converter for Battery Energy Storage SystemsNoriko Kawakami, Satoru Ota, Hironobu Kon, Shuji Konno, Hirofumi Akagi, Hirom Kobayashi and Naotaka Okada, Toshiba Mitsubishi Electric Industrial Systems, Japan; Tokyo Institute of Technology, Japan; Central Research Institute of Electric Power Ind, Japan
4:45 pm • A Parallel-redundant BTB (Back-to-back) System Using Modular Multilevel Cascade Converters for Power Transmission GridsKei Sekiguchi, Pracha Khamphakdi, Makoto Hagiwara and Hirofumi Akagi, Tokyo Institute of Technology, Japan
S117 Single Phase AC-DC
Room: 110/112Chair: Sudipta Chakraborty
3:30 pm • PFC Converter with Novel Integration of both EMI Filter and Boost InductorsCheng Deng, Dehong Xu, Changsheng Hu and Zhiwei Wen, Zhejiang University, China
3:55 pm • A Power Supply Reaching Titanium Level Efficiency for a Wide Range of Input VoltagesWerner Konrad, Christian Rainer, Gerald Deboy and Annette Muetze, Graz University of Technology, Austria; Infineon Technologies Austria AG, Austria
4:20 pm • A Primary-side-control Quasi-resonant Flyback Converter with Tight Output Voltage Regulation and Self-calibrated Valley SwitchingPing-Chun Hsieh, Chia-Jung Chang and Chern-Lin Chen, National Taiwan University, Taiwan; Noveltek Semiconductor Corp., Taiwan
4:45 pm • Full-bridge Single-stage PFC with Reduced DC Bus Capacitor and Improved Light Load Operation as a Solution for Modern SMPSHugo Ribeiro, Beatriz Borges and Carlos Ferreira, Instituto de Telecomunicacoes/ IPT, Portugal; Universidade Tecnica de Lisboa, Portugal
S118 Single Phase DC to AC Inverters III
Room: 111/113Chair: Luca Solero
3:30 pm • Modulation Scheme of a Differential-mode Cuk Inverter for Loss MitigationSiamak Mehrnami and Sudip Mazumder, University of Illinois, Chicago, United States
3:55 pm • DSPIC Microcontroller Based Implementation of a Flyback PV Microinverter Using Direct Digital SynthesisSerkan Ozturk and Isik Cadirci, Hacettepe University, Turkey
4:20 pm • Load Impedance Estimation and Iterative-learning Control for a Single-phase Three-wire InverterTsai Fu Wu, Chia-Ling Kuo, Li-Chiun Lin and Hui-Chung Hsieh, National Tsing Hua University, Taiwan; National Chung Cheng University, Taiwan
4:45 pm • Parallel Operation of Digital Controlled Modified Sine Wave InvertersSu Sheng, Peng Li and Brad Lehman, Northeastern University, United States
S119 Lighting Technologies II
Room: 201Chair: Ron Hui
3:30 pm • A Single-inductor, Multiple-channel Current-balancing LED Driver for Display Backlight ApplicationsHyun-Chang Kim, Chang Soo Yoon, Deog-Kyoon Jeong and Jaeha Kim, Seoul National University, Korea (South)
3:55 pm • Zero Ripple Single Stage AC-DC LED Driver with Unity Power FactorPeng Fang, Brian White, Chris Fiorentino and Yan-Fei Liu, Queen’s University, Canada
4:20 pm • A Novel Pulse Current Driving; High Power Factor LED Driver Without Electrolytic CapacitorsJohn Lam and Praveen K. Jain, Queen’s University, Canada
4:45 pm • Digital Implementation of the Feedforward Loop of the Asymmetrical Half-bridge Converter for LED Lighting ApplicationsManuel Arias, Marcos Fernandez, Jose Evelio Rodriguez, Diego Gonzalez and Javier Sebastian, Universidad de Oviedo, Spain
S120 Model-based Sensorless Control
Room: 203Chair: David Diaz-Reigosa
3:30 pm • Stability and Dynamic Performance Improvement of a Sensorless IPMSM Drive via Adaptive Estimated-speed-assisted Position Prediction and Current Quality EvaluationYue Zhao, Wei Qiao and Long Wu, University of Nebraska-Lincoln, United States; John Deere Electronic Solutions, United States
3:55 pm • Comparative Analysis of Feedback Gains for Adaptive Full-order Observers in Sensorless Induction Motor DrivesBin Chen, Wenxi Yao, Kai Wang, Kevin Lee and Zhengyu Lu, Zhejiang University, China; Eaton Corporation, United States
4:20 pm • Signal-injection Assisted Full-order Observer with Parameter Adaptation for Synchronous Reluctance Motor DrivesToni Tuovinen and Marko Hinkkanen, Aalto University School of Electrical Eng., Finland
4:45 pm • A Novel Approach to the Design of Back-EMF Observer Based Sensorless Control of Non-salient PMSM: Theoretical Analysis and Experimental InvestigationsNicola Bedetti, Sandro Calligaro and Roberto Petrella, Gefran s.p.a., Italy; University of Udine, Italy
2013 IEEE Energy Conversion Congress & Exposition® • 63Technical Program Schedule | Oral Sessions
S121 High Frequency Effects in Electric Machines
Room: 205Chair: Jagadeesh Tangudu
3:30 pm • Experimental and Analytical Determination of Proximity Losses in a High-speed PM MachinePhil Mellor, Rafal Wrobel, Daniel Salt and Antonio Griffo, University of Bristol, United Kingdom
3:55 pm • Rotor Impedance of the High-frequency Circulating Bearing Current Path in Inverter-fed AC MachinesOliver Magdun, Yves Gemeinder and Andreas Binder, Darmstadt University of Technology, Germany
4:20 pm • Skin effect and Proximity Losses in High Speed Brushless Permanent Magnet MotorsMircea Popescu and David Dorrell, Motor Design Ltd, United Kingdom; University of Technology, Sydney, Australia
4:45 pm • A Stator Turn-fault Detection Method for Inverter-fed IPMSM with High-frequency Current InjectionMyoungho Kim, Seung-Ki Sul and Junggi Lee, Samsung Heavy Industries, Korea (South); Seoul National University, Korea (South); LG Electronics, Korea (South)
S122 Diagnostics and Fault Analysisof Electric Machines II
Room: 207Chair: Sang Bin Lee
3:30 pm • Accurate and Simple Diagnosis Algorithm for Inter-turn Fault in the BLDC MotorKyung-Tae Kim and Jin Hur, University of Ulsan, Korea (South)
3:55 pm • A Novel Online Stator Groundwall Insulation Monitoring Scheme for Inverter-fed AC MotorsPinjia Zhang, Karim Younsi and Prabhakar Neti, GE Global Research, United States
4:20 pm • A Detailed Transient Model of Interior Permanent Magnet Motor Accounting for Saturation under Stator Turn FaultBhaskar Sen, Jiabin Wang and Panagiotis Lazari, The University of Sheffield, United Kingdom
4:45 pm • Fault Diagnosis of Mechanical Unbalance for PMSM Drive System Under Nonstationary ConditionJun Hang, Jianzhong Zhang, Ming Cheng and Zheng Wang, Southeast University, China
S123 Gallium Nitride Devices
Room: 210/212Chair: Shashank Krishnamurthy
3:30 pm • Gallium Nitride Based High Power-density Automotive HID Electronic BallastZirui Jia, Min Chen, Xiaofeng Zhaoming and Qian, Zhejiang University, China
3:55 pm • Evaluation of 600 V Cascode GaN HEMT in Device Characterization and All-GaN-based LLC Resonant ConverterWeimin Zhang, Zhuxian Xu, Zheyu Zhang, Fred Wang, Leon Tolbert and Benjamin Blalock, University of Tennessee, United States
4:20 pm • Simulation Model Development and Verification for High Voltage GaN HEMT in Cascode StructureZhengyang Liu, Xiucheng Huang, Fred C. Lee and Qiang Li, Virginia Tech, United States
4:45 pm • Analytical Loss Model of High Voltage GaN HEMT in Cascode ConfigurationXiucheng Huang, Qiang Li, Zhengyang Liu and Fred Lee, Virginia Tech, United States
64 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Poster Sessions
Monday, September 16 5:00 pm – 6:30 pm
Poster Session: Charging Systems
Room: Exhibit Hall A - NorthChair: Pierluigi Tenca
P101 • A Quick Charger Station for EVs Using a Pulse Frequency TechniqueChetnaphat Praisuwanna and Surin Khomfoi, King Mongkut’s Institute of Technology Ladkraban, Thailand
P102 • Modular Battery Charger for Electric VehiclesBryan Savage, Roger Shuttleworth and Nigel Schofield, University of Manchester, United Kingdom; McMaster University, Canada
P103 • Closed-loop control on DC Link Voltage Ripple of Plug-in Hybrid Electric Vehicle Charger with Sinusoidal ChargingLingxiao Xue, Paolo Mattavelli, Dushan Boroyevich, Zhiyu Shen and Rolando Burgos, Virginia Tech, United States; DTG-University of Padova, Italy
Poster Session: Fuel Cell Vehicles
Room: Exhibit Hall A - NorthChair: Pierluigi Tenca
P301 • Novel Interleaved Bidirectional Snubberless Naturally Clamped Zero Current Commutated Soft-switching Current-fed Full-bridge Voltage Doubler for Fuel Cell VehiclesPan Xuewei and Akshay Rathore, National University of Singapore, Singapore
Poster Session: Wireless Power Transfer
Room: Exhibit Hall A - NorthChair: Pierluigi Tenca
P501 • A Time-efficient Methodology For Visualizing Time-varying Magnetic Flux Patterns of Mid-range Wireless Power Transfer SystemsCheng Zhang, Wenxing Zhong, S.Y.(Ron) Hui and Xun Liu, The University of Hong Kong, Hong Kong; Convenientpower HK Ltd., Hong Kong
P502 • A Compact Wireless Charging System for Electric VehiclesNing Puqi, Onar Omer, Miller John and Whitte Clifford, Oak Ridge National Lab, United States
P503 • Finite-element-simulation-assisted Optimized Design of an Asymmetrical High-power Inductive Coupler with a Large Air-gap for EV ChargingRaffael Haldi, Isaac Nam, Kurt Schenk and Enrico Santi, NTB Interstate University of Applied Sciences, Switzerland; University of South Carolina, United States
P504 • A 10kW Transformer with a Novel Cooling Structure of a Contactless Power Transfer System for Electric VehiclesItaru Fujita, Tomohiro Yamanaka, Yasuyoshi Kaneko, Shigeru Abe and Tomio Yasuda, Saitama University, Japan; Technova Inc, Japan
P505 • Bidirectional Contactless Power Transfer System for Electric VehiclesSoichiro Nakadachi, Shigeru Mochizuki, Sho Sakaino, Yasuyoshi Kaneko, Shigeru Abe and Tomio Yasuda, Saitama University, Japan; Technova Inc, Japan
P506 • Field Containment in Dynamic Wireless Charging Systems Through Source-receiver InteractionKibok Lee, Zeljko Pantic and Srdjan Lukic, North Carolina State University, United States
Poster Session: Passives and Magnetics
Room: Exhibit Hall A - NorthChair: Craig Winterhalter
P701 • Scaling the Serialization of Mosfets by Magnetically Coupling their Gate ElectrodesEmmanouil Dimopoulos and Stig Munk-Nielsen, Aalborg University, Denmark
P702 • Turn-on Loss Reduction of 6.5kV/500A Trench/Field-stop IGBTs Using a Simple GDUPhilipp Kleinichen, Rodrigo Alvarez, Martin Buschendorf and Steffen Bernet, Technische Universitaet Dresden, Germany; Technical University of Dresden, Germany; Dresden University of Technology, Germany
P703 • EMI Reduction with Near Field Coupling Suppression Techniques for Planar Transformers and CM Chokes in Switching-mode Power ConvertersYongbin Chu, Shuo Wang, Dianbo Fu and Jun Xu, University of Texas at San Antonio, United States; Huawei Technologies Co., Ltd, United States
P704 • Genetic Algorithm Based High Inductance Density Low-profile Inductor OptimizationTao Fan, Xuhui Wen and Puqi Ning, IEE Chinese Academy of Sciences, China
P705 • Inductor Design for Low Loss with Dual Foil Windings and Quasi-distributed GapCharles Sullivan, Hamza Bouayad and Yue Song, Thayer School of Engineering at Dartmouth, United States
P706 • High Frequency Analysis of an Integrated Planar Transformer with Common Mode EMI Suppression CapabilityMajid Pahlevaninezhad, Djilali Hamza and Praveen Jain, Queen’s University, Canada
P707 • Planar Inductor with Quasi-distributed Gap Core and Busbar Based Planar WindingsNomura Tsuyoshi, Wang Chi-Ming, Seto Kayoko and Yoon Sang Won, Toyota Research Institute of North America, United States; Toyota Motor Corporation, Japan
P708 • Characteristics Analysis and Performance Evaluation for Interleaved Boost Converter with Integrated Winding Coupled InductorJun Imaoka, Masayoshi Yamamoto, Kazuhiro Umetani, Seikoh Arimura and Tetsuo Hirano, Shimane University, Japan; DENSO Corporation, Japan; DENSO CORPORATION, Japan
P709 • A Transient Core Loss Calculation Algorithm for Soft Magnetic Composite MaterialMasaki Wasekura, Chi-Ming Wang, Yoshitaka Maeda and Robert Lorenz, Toyota Motor Corporation, Japan; University of Wisconsin-Madison, United States; Toyota Central R and D Labs., Inc, Japan; University of Wisconsin - Madison, United States
P710 • Galvanic Isolation for High Frequency Applications Using an Integrated Dielectric StructureAdrian Zsombor Amanci, Harry Ruda and Francis Dawson, University of Toronto, Canada
N
N
N
N
2013 IEEE Energy Conversion Congress & Exposition® • 65Technical Program Schedule | Poster Sessions
P711 • Practical Inductance Calculation for Planar Magnetics With Track-width-ratioSamuel R. Cove and Martin Ordonez, University of British Columbia, Canada
P712 • Determination of the Optimal Thickness for a Multi-layer Transformer WindingKartik Iyer, Kaushik Basu, William Robbins and Ned Mohan, University of Minnesota,Twin Cities, United States
Poster Session: Control Issues in Electric Drives
Room: Exhibit Hall A - EastChair: David Diaz-Reigosa
P901 • A New Oscillation Controller Design and Induction Machine Stability Analysis of Volts/Hz-based Industrial Adjustable Speed Drives in a Wide Speed and Power RangeKevin Lee, Wenxi Yao, Bin Chen, Zhengyu Lu, Anbo Yu and Li David, Eaton Corporation, United States; Zhejiang University, China; Eaton, China
P902 • Characteristics of Speed Control of Two Induction Motors Fed by a Five-leg Inverter with Space Vector ModulationMasaya Iwashita, Yosuke Suzuki, Kouki Matsuse and Kaushik Rajashekara, Meiji University, Japan; The University of Texas at Dallas, United States
P903 • Detection of Resonance Frequency in Motion Control SystemsSheng-Ming Yang and Shih-Chuan Wang, National Taipei University of Technology, Taiwan
P904 • State-space Speed Control of Two-mass Mechanical Systems: Analytical Tuning and Experimental EvaluationSeppo Saarakkala and Marko Hinkkanen, Aalto University, Finland
P905 • Control of Pseudo-sinusoidal Switched Reluctance Motor With Zero Torque Ripple and Reduced Input Current RippleLe Du, Swint Ethan, Bin Gu and Jih-Sheng Lai, Virginia Tech, United States; Applimotion,Inc, United States; Virginia Tech, United States
P906 • Advanced Control Techniques for Switched Reluctance Machine Drives in Emerging ApplicationsYilmaz Sozer, Iqbal Husain and David Torrey, University of Akron, United States; North Carolina State University, United States; GE Global Research, United States
P907 • Wide Speed Range Operation of Surface Permanent Magnet Synchronous Machine using an Open Winding and a Dual Inverter DriveReaz ul Haque, Mohammad Sedigh Toulabi, Andrew Knight and John Salmon, University of Alberta, Canada
Poster Session: Sensorless Control of AC drives
Room: Exhibit Hall A - EastChair: Giacomo Scelba
P1101 • Sensorless Control of Low-cost Single-phase Hybrid Switched Reluctance Motor DriveUffe Jakobsen, Kaiyuan Lu, Peter Omand Rasmussen, Dong-Hee Lee and Jin Woo Ahn, Smedegaard A/S, Denmark; Aalborg University, Denmark; Kyungsung University, Korea (South)
P1102 • An Extended Flux Model-based Rotor Position Estimator for Sensorless Control of Interior Permanent Magnet Synchronous MachinesYue Zhao, Zhe Zhang, Wei Qiao and Long Wu, University of Nebraska-Lincoln, United States; John Deere Electronic Solutions, United States
P1103 • Sensorless Control Method for PMSM Based on Frequency-adaptive Disturbance ObserverYongsoon Park and Seung-Ki Sul, Seoul National University, Korea (South)
P1104 • Sensorless Vector Control Suitable for Position-dependent Load Torque ApplicationsTakahiro Suzuki, Yuichi Shimizu, Yasuo Notohara and Yoshitaka Iwaji, Hitachi, Ltd., Japan; Hitachi Appliances, Inc., Japan
P1105 • Closed-loop MRAS Speed Observer for Linear Induction Motor DrivesAngelo Accetta, Maurizio Cirrincione, Marcello Pucci and Gianpaolo Vitale, ISSIA-CNR, Italy; UTBM, France; CNR - ISSIA, Italy
P1106 • Sensorless Control Scheme for Ultra High Speed Switched Reluctance MachineJie Dang and Ronald G. Harley, Georgia Institute of Technology, United States
Poster Session: Assorted Issues in Electric Drives I
Room: Exhibit Hall A - EastChair: Fernando Briz
P1301 • Dielectric Electro Active Polymer Incremental Actuator Driven by Multiple High-voltage Bidirectional DC-DC ConvertersPrasanth Thummala, Zhe Zhang, Michael A. E Andersen and Sarban Rahimullah, Technical University of Denmark, Denmark; Danfoss PolyPower, Denmark
P1302 • Thermal Cycling Evaluation for DFIG Wind Turbine Power Converter Based on Joint ModellingTing Lei, Mike Barnes and A.C. Smith, University of Manchester, United Kingdom
P1303 • Self-commissioning of Interior Permanent Magnet Synchronous Motor Drives with High-frequency Current InjectionShafiq Ahmed Odhano, Paolo Giangrande, Chris Gerada and Iustin Radu Bojoi, Politecnico di Torino, Italy; University of Nottingham, United Kingdom
P1304 • On-line Rotor Time Constant Estimation for Indirect Field Oriented Induction MachineAnno Yoo, Chanook Hong and Jung-Ik Ha, LSIS, Korea (South); Seoul National University, Korea (South)
P1305 • Using Loss Location and Loss Magnitude Manipulation for Tuning of Field Oriented Induction Machine DrivesMark Kringle and Robert Lorenz, WEMPEC, UW Madison, United States; University of Wisconsin - Madison, United States
P1306 • Six Step Phase Modulation of Dual Inverter for Open-end Permanent Magnet Synchronous MotorYongjae Lee and Jung-Ik Ha, Seoul National University, Korea (South)
P1307 • Torque Ripple Suppression of Permanent Magnet Synchronous Motors Considering Total Loss ReductionNoriya Nakao and Kan Akatsu, Shibaura Institute of Technology, Japan
P1308 • Unified Direct-Flux Vector Control of Induction Motor Drives with Maximum Torque per Ampere OperationIustin Radu Bojoi, Zijian Li, Shafiq Ahmed Odhano, Giovanni Griva and Alberto Tenconi, Politecnico di Torino, Italy
E
E
E
66 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Poster Sessions
P1309 • Six-phase Machine Conversion System with 3-phase and Single-phase Series ConvertersCursino Jacobina, Victor Melo, Nady Rocha and Edison da Silva, DEE - Federal University of Campina Grande, Brazil; DEE - Federal University of Paraiba, Brazil
Poster Session: Renewable Energy Technologies I:Wind and Wave
Room: Exhibit Hall A - SouthChair: Dan Ionel
P1501 • Novel Variable Step-size Maximum Power Point Tracking Control Strategy for PV Systems Based on Contingence AnglesTang Lei, Xu Wei, Zhang Yongchang and Zeng Cengbi, Sichuan University, China; RMIT University, Australia; North China University of Technology, China
P1502 • Investigation on Open Winding PMSG System with the Integration of Full Controlled and Uncontrolled ConverterYijie Zhou and Heng Nian, College of Electrical Engineering, Zhejiang Uni, China; Zhejiang University, China
P1503 • Optimal Control for an HVDC System with Series Connected Offshore Wind TurbinesAlejandro Garces, Rene Alexander Barrera-Cardenas and Marta Molinas, Universidad Tecnologica de Pereira, Colombia; Norwegian University of Science and Technology, Norway
P1504 • A New Scheme of Full-power Converter used for Grid Integration of Variable-speed Wind TurbinesKatsumi Nishida, Tarek Ahmed and Mutsuo Nakaoka, Ube National College of Technology, Japan; Assiut University, Egypt; Kyungnam University, Korea (South)
P1505 • Adaptive Feature Extraction and SVM Classification for Real-time Fault Diagnosis of Drivetrain GearboxesDingguo Lu and Wei Qiao, University of Nebraska-Lincoln, United States
Poster Session: Multilevel Converters
Room: Exhibit Hall A - SouthChair: Edison Da Silva
P1701 • A Regenerative Cascaded Multilevel Converter with Reduced Active Front EndsLan Xiong, Xiaoming Zha, Fei Liu and Jinwu Gong, Wuhan University, China
P1702 • Switching Performance Optimization for High Switching Frequency High Power 3-level Neutral Point Clamped Phase LegYang Jiao, Sizhao Lu and Fred Lee, Virginia Tech, United States
P1703 • A High Switching-Frequency MOSFET-based Three-level Voltage Source ConverterKen Kobravi and Reza Iravani, Industry, United States; Academy, Canada
P1704 • Modeling and Control of Multi Modular Converters using Optimal LQR Controller with Integral ActionElyas Rakhshani, Antoni M. Cantarellas, Daniel Remon, Pedro Rodriguez and Ignacio Candela, ABENGOA Research, Spain; Abengoa Research, Spain; Technical University of Catalonia (UPC), Spain
P1705 • A Comparative Study of Three-level DC-DC ConvertersMehdi Narimani, Gerry Moschopoulos and Dunisha Wijeratne, The University of Western Ontario, Canada
P1706 • A Fast and Generalized Space Vector PWM Scheme and Its Application in Optimal Performance Investigation for Multilevel InvertersYi Deng, Koon Hoo Teo and Ronald G. Harley, Georgia Institute of Technology, United States; Mitsubishi Electric Research Laboratories, Inc., United States
P1707 • A Survey on the Modular Multilevel Converters — Modeling, Modulation and ControlsJun Wang, Rolando Burgos and Dushan Boroyevich, Virginia Polytechnic Institute and State Univers, United States; Virginia Polytechnic Institute and State University, United States
P1708 • Discontinuous Hybrid Modulation Technique for 3-phase Three-level Neutral Point Clamped InvertersAlessandro Pevere and Roberto Petrella, DIEGM - University of Udine, Italy
P1709 • An Improved Control System for Modular Multilevel Converters Featuring New Modulation Strategy and Voltage Balancing ControlShengfang Fan, Kai Zhang, Jian Xiong and Yaosuo Xue, Huazhong University of Science and Technology, China; Corporate Technology, Siemens Corporation, United States
P1710 • A Multilevel AC-AC Conversion System and Control Method using Y Connected H Bridge Circuit and Bidirectional SwitchesMasakazu Muneshima and Yasuyuki Nishida, Meidensha Corporation, Japan; Chiba Institute of Technology, Japan
P1711 • A Broad Range of Frequency Control for the Modular Multilevel Cascade Converter Based on Triple-star Bridge-cells (MMCC-TSBC)Wataru Kawamura, Makoto Hagiwara and Hirofumi Akagi, Tokyo Institute of Technology, Japan
P1712 • Method to Minimize the Low-frequency Neutral-point Voltage Oscillations with Time-offset Injection for Neutral-point-clamped InvertersUi-Min Choi, Kyo-Beum Lee and Frede Blaabjerg, Aalborg University, Denmark; Ajou University, Korea (South)
P1713 • Capacitor Voltage Balancing of a New Five-level Hybrid-clamped InverterYingyu Zeng, Kui Wang, Yongdong Li and Zedong Zheng, Tsinghua University, China
P1714 • Capacitor Voltage Balancing of Five-level ANPC Converter based on Zero-sequence Voltage Injection Using PS-PWMKui Wang, Zedong Zheng, Yongdong Li, Jianghua Feng, Jing Shang and Yingyu Zeng, Tsinghua University, China; CSR Zhuzhou Institude CO., LTD., China
P1715 • Closed Form Line to Line Voltage THD of the Cascade Multilevel Inverter Including Device Voltage DropsNaeem Farokhnia, Muneer Mohammad and Mehrdad Ehsani, Texas A and M University, United States
P1716 • On Reliability of Medium Voltage Multilevel ConvertersRoman Grinberg, Gernot Riedel, Eiril Bjornstad, Arthur Korn and Peter Steimer, ABB Switzerland, Corporate Research, Switzerland; ABB Norway, Norway; ABB Switzerland, Switzerland
P1717 • Natural Balancing of the 2-Cell Modular Multilevel ConverterWim van der Merwe, ABB Corporate Research, Switzerland
P1718 • Analysis and Space-vector-modulation of a 4L-3B6-VSCMarvin Tannhaeuser, Steffen Bernet and Jens Weber, Dresden University of Technology, Germany
S
S
2013 IEEE Energy Conversion Congress & Exposition® • 67Technical Program Schedule | Poster Sessions
P1719 • Experimental Investigation of Short-circuit Failures in a Three Level Neutral-point-clamped Voltage-source Converter Phase-leg with IGBTsMichael Sprenger, Rodrigo Alvarez, Marvin Tannhaeuser and Steffen Bernet, Dresden University of Technology, Germany
P1720 • Small-signal Modeling and Control of 3-phase Grid-connected Three-level Neutral-point-clamped Inverter with a LCL FilterJa-Hwi Cho, Nam-Joon Ku, Rae-Young Kim and Dong-Seok Hyun, Hanyang University, Korea (South)
P1721 • The Polyphase Cascaded-cell DC-DC ConverterStaffan Norrga, Lennart Angquist and Antonios Antonopoulos, KTH Royal Institute of Technology, Sweden
P1722 • A Comparison of Phase Disposition and Phase Shift PWM Strategies for Modular Multilevel ConvertersXiaojie Shi, Zhiqiang Wang, Leon Tolbert and Fred Wang, University of Tennessee, United States; The University of Tennessee, United States
Poster Session: Converter Modeling and Control
Room: Exhibit Hall A - WestChair: Paolo Mattavelli
P1901 • Benchmarking of PWM Techniques Effects on Efficiency, Power Quality and EMI in DC-supplied Induction Motor DrivesMaria Carmela Di Piazza, Marcello Pucci and Gianpaolo Vitale, CNR - ISSIA, Italy
P1902 • Assessment of Synchronous-frame PI Current Control Dynamics by Means of Multivariable Analysis with Time-delays ConsiderationFrancisco D. Freijedo, Ana Vidal, Alejandro Gomez-Yepes, Jano Malvar, Oscar Lopez and Jesus Doval-Gandoy, Gamesa Innovation and Technology, Spain; University of Vigo, Spain; University of Vigo., Spain
P1903 • Analysis and Control of DC Voltage Ripple for Modular Multilevel Converters under Single Line to Ground FaultXiaojie Shi, Zhiqiang Wang, Leon Tolbert and Fred Wang, University of Tennessee, United States; The University of Tennessee, United States
P1904 • Cascaded Model Predictive Control of Voltage Source Inverter with Active Damped LCL FilterBjarte Hoff, Waldemar Sulkowski and Pawan Sharma, Narvik University College, Norway
P1905 • A Newly Normalized Deadbeat Control for Grid Connected Distributed Generation SystemMohamed Trabelsi and Lazhar Ben-Brahim, Qatar University, Qatar
P1906 • A Method to Identify the Equivalent Loss Resistance of Voltage Source Converters for Current Control DesignAna Vidal, Alejandro G. Yepes, Francisco D. Freijedo, Oscar Lopez, Jano Malvar and Jesus Doval-Gandoy, University of Vigo, Spain; Gamesa Innovation and Technology, Spain
P1907 • Series Z-source Converter Modeling and Controller Design MethodJoanne Kitson, David Drury and Phil Mellor, University of Bristol, United Kingdom
P1908 • Transformer Shielding Technique for Common Mode Noise Reduction in Isolated ConvertersYuchen Yang, Daocheng Huang, Fred Lee and Qiang Li, Virginia Tech, CPES, United States
P1909 • Terminal Characterization of Conducted EMI in 3-phase Power ConvertersJunsheng Wei, Dieter Gerling and Marek Galek, Universitaet der Bundeswehr Muenchen, Germany; University of Federal Defence Munich, Germany; Siemens AG Corporate Technology, Germany
P1910 • Common Mode EMI Noise Characterization and Improvement for GaN Switched-Capacitor ConverterKaichien Tsai, Feng Qi, Ernest Davidson and Longya Xu, The Ohio State University, United States
P1911 • Novel Digital Control Schemes of Dynamic Current Sharing for Multiphase Buck Converter with Fast Dynamic ResponseKejiu Zhang, Shiguo Luo, Thomas Wu and Issa Batarseh, Dell Inc., United States; University of Central Florida, United States
P1912 • Design of an AC-DC and DC-DC Interleaved PWM Controller for Switching Power SupplyTsung-Han Yu, Tsorng-Juu Liang, Kai-Hui Chen, Ji-Shiuan Li and Ji-Shiang Lee, National Cheng Kung University, Taiwan
P1913 • New Hybrid Control Technique to Improve Light Load Efficiency while Meeting the Hold-up Time Requirement for Two-stage Server PowerYen-Shin Lai, Zih-Jie Su and Wen-Shyue Chen, National Taipei University of Technology, Taiwan
P1914 • Research on Feedforward Control of Superbuck Converter to Null Audio-susceptibilityYan Li, Pengyu Jia, Beibei Wang and Trillion Q. Zheng, Beijing Jiaotong University, China
P1915 • Automatic Resonant Frequency Tracking in Unregulated LLC Resonant Converters Based on Total Resonant Current Harmonic CalculationSiyao Jiang, Weimin Zhang, Bo Liu and Fred Wang, Shandong University, China; University of Tennessee, United States; The University of Tennessee, United States
P1916 • Two Loop Average Current Control Implementation using Cypress PSoC with Closed Loop Experimental ResultsUdupi Rajagopal Prasanna and Akshay Rathore, University of Texas, Dallas, United States; National University of Singapore, Singapore
P1917 • Input Impedance of Voltage Source Converter with Stationary Frame Linear Current Regulators and Phase-locked LoopBo Wen, Dushan Boroyevich, Rolando Burgos and Paolo Mattavelli, Virginia Tech, United States; DTG-University of Padova, Italy
P1918 • A Simple Deadbeat Current Control for Single-phase Transformerless Inverters with LCL FilterGiampaolo Buticchi, Davide Barater, Luca Tarisciotti and Pericle Zanchetta, University of Parma, Italy; University of Nottingham, United Kingdom
P1919 • An Optimal PWM Strategy of Z-source InvertersYu Tang, Ding Jiudong and Xie Shaojun, Jiangsu Key laboratory of New Energy Generation, China
P1920 • Study of Five-phase Space Vector PWM Considering Third Order HarmonicsDong Jiang and Wei Qian, United Technologies Research Center, United States; Magna Electronics, United States
P1921 • Noise Shaping Modulation and Dynamic Current Control of NPC Inverters for Low Switching Frequency ApplicationsGalina Mirzaeva, Graham Goodwin, Cesar Silva and Manuel Diaz, University of Newcastle, Australia; Universidad Technica Federico Santa Maria, Chile
W
68 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Poster Sessions
P1922 • Improved Common-mode Voltage Elimination Modulation with Dead-Time Compensation for Neutral-point-Clamped 3-phase InvertersXuning Zhang, Rolando Burgos, Dushan Boroyevich, Paolo Mattavelli and Fei Wang, Virginia Tech, United States; Virginia Polytechnic Institute and State University, United States; University of Tennessee, United States
P1923 • EMC Models for Power Electronics: from Converter Design to System LevelGenevieve Frantz, David Frey, Jean-Luc Schanen, Hemant Bishnoi, Paolo Mattavelli and Bertrand Revol, G2ELab, France; CPES, United States; Virginia Tech, United States; SATIE, France
P1924 • A Novel Strategy for Vienna-type Rectifier With Light Unbalanced GridSensen Liu, Lijun Hang and Leon Tolbert, Zhejiang Hangzhou Municipal Electric Power bure, China; The College of Electrical Engineering, Zhejiang, China; The University of Tennessee at Knoxville, China
Tuesday, September 17 10:00 am – 11:30 am
Poster Session: Devices, Modules and Converters
Room: Exhibit Hall A - NorthChair: Filippo Chimento
P2101 • High Temperature Gate Drive Circuits for Silicon Carbide Switching DevicesYang Wang and Shashank Krishnamurthy, United Technologies Research Center, United States
P2102 • Dynamic Characterization of Parallel-connected High-power IGBT ModulesFilippo Chimento, Liwei Wang, Muhammad Nawaz and Nan Chen, ABB Coprorate Research, Sweden; ABB Corporate Research, Sweden
P2103 • Sensing Power MOSFET Junction Temperature Using Circuit Output Current Ringing DecayHe Niu and Robert Lorenz, Student, United States; University of Wisconsin - Madison, United States
P2104 • Design Considerations and Performance Evaluation of 1200 V, 100 A SiC MOSFET Based Converter for High Power Density ApplicationSamir Hazra, Sachin Madhusoodhanan, Giti Karimi Moghaddam, Kamalesh Hatua and Subhashish Bhattacharya, North Carolina State University, United States; Indian Institute of Technology Madras, India
Poster Session: Fuel Cells
Room: Exhibit Hall A - NorthChair: Giorgio Spiazzi
P4101 • A New 3-phase High-power Soft-switched DC-DC Converter Based Fuel Cell Power Conditioning System with Minimized DC CapacitorXiaohu Liu and Hui Li, Florida State University, United States
P4102 • Electrical Circuit Analysis of CO Poisoning in High Temperature PEM Fuel Cells for Rapid Fault DiagnosticsChris De Beer, Paul Barendse, Pragasen Pillay, Brian Bullecks and Raghunathan Rengaswamy, University of Cape Town, South Africa; Texas Tech University, United States
Poster Session: Lighting Technologies
Room: Exhibit Hall A - NorthChair: Giorgio Spiazzi
P4301 • Input Filter Design for TRIAC Dimmable LED LampsMontu Doshi and James Patterson, Texas Instruments, Inc., United States
P4302 • Sliding Mode Control of a Cuk Converter with Variable Hysteresis Width for HBLEDs ApplicationsMirko Bodetto, Abdelali El Aroudi, Angel Cid-Pastor, Francisco Javier Calvente Calvo and Luis Martinez-Salamero, Universidad Rovira i Virgili, Spain
P4303 • Hybrid Passive Current Sharing Method for Multi-channel SRC LED DriverTing Jiang, Jianfeng Wang, Junming Zhang and Xinke Wu, Zhejiang University, China
P4304 • DC Level Dimmable LED Driver Using DC DistributionGab-Su Seo, Kyu-Chan Lee and Bo-Hyung Cho, Seoul National University, Korea, Republic of; INTERPOWER, Korea, Republic of
P4305 • A Novel Double Frequency Dimmer for Lighting DeviceWu Chen, Zhu Xu, Guangjiang Wang and Gangyao Wang, Southeast University, China; North Carolina State University, United States
P4306 • Hybrid Centralized-distributed Power Conditioning System for Thermoelectric Generator with High Energy EfficiencyHongfei Wu, Kai Sun, Min Chen, Zhe Chen and Yan Xing, Nanjing University of Aeronautics and Astronautics, China; Tsinghua University, China; Aalborg University, Denmark; Nanjing University of Aeronautics and Astronautics, China
P4307 • Load Characterisation of Electric SpringChi Kwan Lee, Kai Lok Cheng and Wai Man Ng, The University of Hong Kong, Hong Kong
P4308 • Efficient Single Phase Harmonics Elimination Method for Microgrids Operating in Grid Connected or Standalone ModeSaeed Anwar, Ali Elrayyah and Yilmaz Sozer, University of Akron, United States
Poster Session: Power Converters for Transportationand Utility Applications
Room: Exhibit Hall A - NorthChair: Axel Mertens
P4501 • A Power Decoupling Method based on Four-switch Three-port DC-DC/AC Converter in DC MicrogridWen Cai, Ling Jiang, Bangyin Liu, Shanxu Duan and Changyue Zou, Huazhong University of Science and Technology, China
P4502 • Sinusoidal Compensator with Active Damping Effects in Grid-Connected Inverter with an LCL FilterToshiji Kato, Kaoru Inoue, Haruzumi Kawabata and Yusuke Akiyama, Doshisha University, Japan
P4503 • 1.5MVA Grid-Connected Interleaved Inverters Using Coupled Inductors for Wind Power Generation SystemDongsul Shin, Jong-Pil Lee, Kyung-Jun Lee, Tae-Jin Kim, Dong-Wook Yoo, Fang Zheng Peng, Baoming Ge and Honnyong Cha, Pusan National University, Korea (South); Korea Electrotechnology Research Institute, Korea (South); Michigan State University, United States; Kyungpook National University, Korea (South)
N
N
N
N
P4302 • Sliding Mode Control of a Cuk Converter with Variable Hysteresis Width for HBLEDs ApplicationsMirko Bodetto, Abdelali El Aroudi, Angel Cid-Pastor, Francisco Javier Calvente Calvo and Luis Martinez-Salamero, Universidad Rovira i Virgili, Spain
WITHDRAWN
2013 IEEE Energy Conversion Congress & Exposition® • 69Technical Program Schedule | Poster Sessions
P4504 • Control Technique for 15 kV SiC IGBT-based Active Front End Converter of a 13.8 kV Grid Tied 100 kVA Transformerless Intelligent Power SubstationSachin Madhusoodhanan, Kamalesh Hatua and Subhashish Bhattacharya, North Carolina State University, United States; Indian Institute of Technology Madras, India
P4505 • Reactive Power Compensation Bridge with Minimized Equipped Capacitor and its Application to Static Var CompensatorTakanori Isobe, Kyohei Kato, Yoel Rosales, Daisuke Shiojima and Ryuichi Shimada, Tokyo Institute of Technology, Japan; MERSTech Co., Ltd., Japan
P4506 • Analysis and Design of a Multi-port Converter Using a Magnetic Coupling Inductor TechniqueKenichi Itoh, Masanori Ishigaki, Naoki Yanagizawa, Shuji Tomura and Takaji Umeno, Toyota Central Research and Development Labs., Japan
P4507 • A Compact Integrated Switched Reluctance Motor Drive with Bridgeless PFC ConverterJianing Liang, Linni Jian, Guoqing Xu and Ming Chang, Shenzhen Institutes of Advanced Technology, China; The Chinese University of Hong Kong, Hong Kong
P4508 • Rapid Charging Strategy in the Constant Voltage Mode for a High Power Lithium-ion BatteryYong-Duk Lee and Sung-Yeul Park, University of Connecticut, United States
Poster Session: Assorted Issues in Electric Drives II
Room: Exhibit Hall A - EastChair: Brian Welchko
P2301 • Reducing Switching Losses in BLDC Motor Drives by Reducing Body Diode Conduction of MOSFETsCameron Brown and Bulent Sarlioglu, The Boeing Company, United States; University of Wisconsin - Madison, United States
P2302 • A Fault Diagnosis and Tolerant Method for Switched Reluctance Motor DrivesHak-Seung Ro, Dong-Hee Kim, Hae-Gwang Jeong and Kyo-Beum Lee, Ajou University, Korea (South)
P2303 • Design Constraints of Small Single-phase Permanent Magnet Brushless DC Drives for a Cooling ApplicationStephan Dunkl, Annette Muetze and Gerhard Schoener, Graz University of Technology, Austria; MSG Mechatronic Systems GmbH, Austria
P2304 • Investigation of Permanent Magnet Magnetization for a Bearingless ServomotorJunichi Asama, Kazuyuki Samejima, Takaaki Oiwa and Akira Chiba, Shizuoka University, Japan; Tokyo Institute of Technology, Japan
P2305 • Mixed-mode EMI Noise in 3-phase DC-fed PWM Motor Drive SystemJing Xue and Fred Wang, University of Tennessee, United States
Poster Session: Electrical Machines General
Room: Exhibit Hall A - EastChair: Karim Younsi
P2501 • Evaluation and Design for an Integrated Modular Motor Drive (IMMD) with GaN devicesJiyao Wang, Ye Li and Yehui Han, University of Wisconsin-Madison, United States
P2502 • Torque, Power, Losses and Heat Calculation of a Transverse Flux Reluctance Machine with Soft Magnetic Composite Materials and Disc-shaped RotorJan Doering, Gunar Steinborn and Wilfried Hofmann, TU Dresden, Germany; Technical University Dresden, Germany
Poster Session: Reluctance Machines
Room: Exhibit Hall A - EastChair: Karim Younsi
P2701 • Comparative Study of Electromagnetic Performance of Switched Reluctance Machines under Different Excitation TechniquesZiad Azar and Zi-Qiang Zhu, University of Sheffield, United Kingdom
P2702 • A Novel Permanent Magnet Biased Bearingless Switched Reluctance MotorJianfeng Liu, Huijun Wang, Junfang Bao, Guangxu Zhou and Fengge Zhang, BeiHang University, China; Shandong Academy of Sciences, China; Shenyang University of Technology, China
Poster Session: Losses & Thermal Analaysis in Electrical Machines
Room: Exhibit Hall A - EastChair: Karim Younsi
P2901 • A Hybrid Model for Improved Hysteresis Loss Prediction in Electrical MachinesMaged Ibrahim and Pragasen Pillay, Concordia University, Canada
P2902 • Coupled Electromagnetic-thermal Analysis of Electric Machines Including Transient Operation Based on Finite Element TechniquesWenying Jiang and Thomas Jahns, University of Wisconsin - Madison, United States
P2903 • Modelling, Improvement and Experimental Validation of a 50 kHz-5 kVA Litz-wired Transformer for PV InvertersErnesto L. Barrios, Alfredo Ursua, Luis Marroyo and Pablo Sanchis, Public University of Navarre, Spain; Public University of Navarra, Spain
P2904 • Investigation of Mechanical Loss and Heat Transfer in an Axial-flux PM MachineRafal Wrobel, Gyula Vaniel, Colin Copeland, Tomasz Duda, Dave Staton and Phil Mellor, University of Bristol, United Kingdom; Motor Design Ltd., United Kingdom; Unversity of Bath, United Kingdom
Poster Session: Diagnostics and Fault Detectionin Electrical Machines
Room: Exhibit Hall A - EastChair: Karim Younsi
P3101 • Influence of d- and q-axis Currents on Demagnetization in PM Synchronous MachinesJames McFarland and Thomas Jahns, University of Wisconsin - Madison, United States
P3102 • Inter Turn Short Fault Model of PMSMs with Series and Parallel Winding ConnectionBon-Gwan Gu, Jun-Hyuk Choi and In-Soung Jung, Korea Electronics Technology Institute, Korea (South)
E
E
E
E
E
70 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Poster Sessions
P3103 • Transient Analysis of Irreversible Demagnetization of Permanent Magnet Brushless DC Motor with Stator Turn Fault under the Operating StateYoon-Seok Lee, Kyung-Tae Kim and Jin Hur, University of Ulsan, Korea (South)
P3104 • The Use of the Signature Analysis of the Stator Instantaneous Complex Apparent Impedance for Discriminating Stator Winding Faults and Supply Voltage Unbalance in 3-phase Induction MotorsM’hamed Drif, Malika Drif, Jorge O. Estima and Antonio J. Marques Cardoso, University of Science and Technolog of Oran M. B, Algeria; University of Beira Interior, Portugal
P3105 • Fault-tolerant Operation Strategy for Claw-pole Generators with Stator Turn-to-turn Short CircuitsSiwei Cheng, Thomas Habetler and Ronald G. Harley, Ford Motor Company, United States; Georgia Institute of Technology, United States
P3106 • Detecting Faults in Doubly Fed Induction Generator by Rotor Side Transient Current MeasurementGoran Stojcic, Kenan Pasanbegovic and Thomas M. Wolbank, Vienna University of Technology, Austria
P3107 • On-line Detection of High Resistance Connections with Inverse-sequence Regulators in Three Phase Induction Motor DrivesLuca Zarri, Michele Mengoni, Yasser Gritli, Fiorenzo Filippetti, Angelo Tani and Sang Bin Lee, University of Bologna, Italy; Korea University, Korea (South)
P3108 • Generalized Bearing Roughness Fault Detection in Claw-pole GeneratorsSiwei Cheng, Thomas Habetler, J. Rhett Mayor and Ronald G. Harley, Ford Motor Company, United States; Georgia Institute of Technology, United States
P3109 • Detection of Gearbox Bearing Defects using Electrical Signature Analysis for Doubly-fed Wind GeneratorsPinjia Zhang and Prabhakar Neti, GE Global Research, United States
P3110 • Analytical Modelling of Stator Turn Fault in Surface Mounted Permanent Magnet MachinesBhaskar Sen and Jiabin Wang, The University of Sheffield, United Kingdom
P3111 • Early Detection Technique for Stator Winding Inter-turn Fault in BLDC Motor Using Input ImpedanceChae-Lim Jeong, Seung-Tae Lee and Jin Hur, University of Ulsan, Korea (South)
P3112 • Study on Bearing Impedance Properties at Several Hundred Kilohertz for Different Electric Machine Operating ParametersVille Niskanen, Annette Muetze and Jero Ahola, Lappeenranta University of Technology, Finland; Graz University of Technology, Austria
Poster Session: Renewable Energy Technologies II: PV
Room: Exhibit Hall A - SouthChair: Hamid A. Toliyat
P3301 • Firefighter Safety for PV Systems: Overview of Future Requirements and Protection SystemsSergiu Spataru, Dezso Sera, Frede Blaabjerg, Laszlo Mathe and Tamas Kerekes, Aalborg University, Denmark
P3302 • A Feedfoward Scheme to Improve System Stability in Grid-connected Inverter with LCL FilterChangyue Zou, Bangyin Liu, Shanxu Duan and Rui Li, Huazhong Univ of Sci and Tech, China; Huazhong University of Science and Technology, China
P3303 • Experimental Verification of Energy Harvest from Non-planar Photovoltaic SurfacesHaiyu Zhang and Robert Balog, Texas A and M University, United States
P3304 • Predicting Shading of Photovoltaic Systems with Cell-level ResolutionStephanie Crocker and Charles Sullivan, Thayer School of Engineering at Dartmouth, United States
P3305 • Dual-stage Microinverter Design with a GaN-based Interleaved Flyback Converter StageLuciano Andres Garcia-Rodriguez, Ethan Williams, Juan Carlos Balda, Jesus David Gonzalez-Llorente, Esteban Lindstrom and Alejandro Oliva, University of Arkansas, United States; Universidad Sergio Arboleda, Colombia; Universidad Nacional del Sur - CONICET, Argentina
P3306 • Phase-Staggered Multiple ZVS Inverters for Grid-connected PV SystemsVidisha Gupta, Ali Khajehoddin and Praveen Jain, Queen’s University, Canada
P3307 • A Comparative Study of Degradation and Performance of Thin Film Photovoltaic Generators Versus a Multi-crystalline GeneratorInigo de la Parra, Miguel Garcia, Javier Marcos and Luis Marroyo, Public University of Navarre, Spain
Poster Session: Solar PV
Room: Exhibit Hall A - SouthChair: Yilmaz Sozer
P3501 • Two-stage PV Inverter System Emulator in Converter Based Power Grid Emulation SystemWenchao Cao, Yiwei Ma, Jingxin Wang, Liu Yang, Jing Wang, Fred Wang and Leon M. Tolbert, The University of Tennessee, Knoxville, United States
P3502 • A Reliable Photovoltaic Integrated UPS System with Modified Maximum Power Point Tracking (MPPT) AlgorithmSwanand Juvekar, Jonathan Brandmeyer, Bobby Compton, Yu Liu and Subhashish Bhattacharya, Eaton, United States; North Carolina State University, United States
P3503 • Transient Performance Analysis of a Small-scale PV-PHS Power Plant Fed by a SVPWM Drive Applied for a Distribution SystemPirooz Javanbakht, Salman Mohagheghi and Marcelo Godoy Simoes, Colorado School of Mines, United States
P3504 • Short-term Photovoltaic Output Forecasting Model for Economic Dispatch of Power System Incorporating Large-scale Photovoltaic PlantMeiqin Mao, Wenjian Gong, Yu Cao and Liuchen Chang, Research Center for Photovoltaic System Engineer, China; University of New brunswick, Fredericton, Canada
S
S
2013 IEEE Energy Conversion Congress & Exposition® • 71Technical Program Schedule | Poster Sessions
Poster Session: Distributed Generation
Room: Exhibit Hall A - SouthChair: Rolando Burgos
P3701 • Distributed Generation Grid Integration Using Virtual Synchronous Generator with Adoptive Virtual InertiaJaber Alipoor, Yushi Miura and Toshifumi Ise, Osaka University, Japan
P3702 • Optimal Location of Battery Energy Storage Systems in Power Distribution Network for Integrating Renewable Energy SourcesSrinivas Bhaskar Karanki, David Xu, Bala Venkatesh and Bob Singh, Ryerson University, Canada; Hydro One Inc, Canada
P3703 • A Generalized Approach for Intelligent Fault Detection and Recovery in Power Electronic SystemsWeiqiang Chen and Ali Bazzi, University of Connecticut, United States
P3704 • Voltage Sag and Unbalance Generator for Power Quality Testing of Adjustable Speed DrivesRangarajan Tallam and Richard Lukaszewski, Rockwell Automation, United States
P3705 • Voltage and Frequency Control of an Islanded Electronically-coupled DG UnitAfsoon Nejati Aghdam, Amin Nobakhti and Houshang Karimi, Sharif University of Technology, Iran; Ecole Polytechnique de Montreal, Canada
Poster Session: Microgrid
Room: Exhibit Hall A - SouthChair: Jin Wang
P3901 • Small-signal Analysis and Modeling of Parallel Inverters Based on the Droop Control Method in MicrogridXuan Zhang, Jinjun Liu, Zhiyuan You and Linyuan Zhou, Xi’an Jiaotong University, China
P3902 • A Robust Synchronization Method for Centralized MicrogridsArmando Bellini, Stefano Bifaretti and Franco Giannini, University of Rome Tor Vergata, Italy
P3903 • Optimal Allocation and Economic Evaluation for Industrial PV MicrogridMeiqin Mao, Peng Jin, Yongchao Zhao, Liuchen Chang and Fu Chen, Research Center for Photovoltaic System Engineering, China; Research Center for Photovoltaic System Engineer, China; University of New Brunswick, Canada
P3904 • H-infinity and Gain Scheduled H-infinity Control for Islanded MicrogridsJoel Steenis, Lloyd Breazeale, Kostas Tsakalis and Raja Ayyanar, Arizona State University, United States
P3905 • A Novel Robust Communication Algorithm for Distributed Secondary Control of Islanded MicroGridsQobad Shafiee, Tomislav Dragicevic, Cedomir Stefanovic, Petar Popovski, Juan Carlos Vasquez and Josep Maria Guerrero, Aalborg University, Denmark
Poster Session: Power Convertersfor Renewable Energy Applications
Room: Exhibit Hall A - SouthChair: Eduard Muljadi
P4701 • Optimization of SiC-based H5 and Conergy-NPC Transformerless PV InvertersStefanos Saridakis, Eftichios Koutroulis and Frede Blaabjerg, Technical University of Crete, Greece; Aalborg University, Denmark
P4702 • Study on a Control Method of a Single-phase Utility Interactive Inverter with a Power Decoupling FunctionKeisuke Toyama and Toshihisa Shimizu, Tokyo Metropolitan University, Japan
P4703 • Dual Active Bridge Converter with PWM Control for Solid State Transformer ApplicationChenhao Nan and Raja Ayyanar, Arizona State University, United States
P4704 • Comparison of Power Converters Considering the Determining Factors in Multi-MW Wind TurbinesKe Ma, Marco Liserre and Frede Blaabjerg, Aalborg University, Denmark
P4705 • Low Voltage Ride-through of Single-phase Transformerless Photovoltaic InvertersYongheng Yang, Frede Blaabjerg and Huai Wang, Dept. of Energy Technology, Aalborg University, Denmark
P4706 • A Bidirectional Current-fed Resonant Push-pull Converter for Low Voltage, High Current ApplicationsJani Hiltunen, Vesa Vaisanen and Pertti Silventoinen, Lappeenranta University of Technology, Finland
P4707 • Saturation Effects in Digital Extremum Seeking Control for Photovoltaic ApplicationsRamon Leyva and Hector Zazo, Universitat Rovira i Virgili, Spain
P4708 • A Compact nX DC-DC Converter for Photovoltaic Power SystemsFang Zheng Peng, Matthew Gebben and Baoming Ge, Michigan State University, United States
P4709 • A Digital Charge-mode Control Algorithm for Power Decoupling in a Flyback MicroinverterShiladri Chakraborty, Niharika Gupta and Souvik Chattopadhyay, Indian Institute of Technology, Kharagpur, India
P4710 • Integration of Multi-terminal DC to DC Hub Architecture with Solid State Transformer for Renewable Energy IntegrationSumit Dutta, Sudhin Roy and Subhashish Bhattacharya, North Carolina State University, United States
P4711 • Use Conditions and Efficiency Measurements of DC Power Optimizers for Photovoltaic SystemsChris Deline and Sara MacAlpine, NREL, United States; University of Colorado, United States
Poster Session: AC to DC Converters
Room: Exhibit Hall A - WestChair: Gerry Moschopoulos
P4901 • Analysis and Design of a New Three-level PFC AC-DC ConverterMehdi Narimani and Gerry Moschopoulos, The University of Western Ontario, Canada; University of Western Ontario, Canada
SS
S
W
72 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Poster Sessions
P4902 • Improving the Dynamic Response of Power Factor Correctors Using Simple Digital Filters: Moving Average Filter Comparative EvaluationJason Forbes, Matias Anun and Martin Ordonez, University of British Columbia, Canada
P4903 • Charge-Based ZVS Soft Switching Analysis of a Single-stage Dual Active Bridge AC-DC ConverterJordi Everts, Florian Krismer, Jeroen Van den Keybus, Johan Driesen and Johann Kolar, Katholieke Universiteit Leuven (KU Leuven), Belgium; ETH Zurich, Switzerland; Triphase, Belgium
P4904 • Single-phase Voltage-doubler with Mismatched Capacitors for Balanced Output Voltages and Reduced DC-bus Voltage RipplesWen-Long Ming and Qing-Chang Zhong, The University of Sheffield, United Kingdom
P4905 • A Single-stage Single-switch Transformerless Buck-buck Converter with Constant Input Power Factor in the Entire Operational RangeYu Chen, Zhihao Zhong, Shengfang Fan and Yong Kang, Huazhong Univ. of Sci and Tech, China
P4906 • A Nonlinear Control Approach for a Bidirectional Full-bridge AC-DC ConverterNabil Akel, Majid Pahlevaninezhad and Praveen Jain, Queen’s University, Canada
P4907 • Observer Based Active Damping of LCL Resonance in Grid Connected Voltage Source ConvertersVlatko Miskovic, Anton H.C. Smith, Charles Romenesko, Vladimir Blasko and Thomas Jahns, Danfoss, United States; Danfoss Power Electronics, United States; United Technologies Research Center, United States; University of Wisconsin - Madison, United States
P4908 • Modeling and Control of Average Input Current to Enhance Power Density for 3-phase Interleaved Boost ConvertersYoungSun Lee, SeYoung Park and Jul-Ki Seok, YeungNam University, Korea, Republic of; Yeungnam University, Korea, Republic of
P4909 • Control of 3-phase Buck-type Rectifier in Discontinuous Current ModeBen Guo, Fred Wang, Rolando Burgos and Eddy Aeloiza, The University of Tennessee, United States; University of Tennessee, United States; Virginia Polytechnic Institute and State University, United States; ABB Corporate Research, United States
P4910 • Low-cost High-power-factor 3-phase Rectifier with Turn-on Current Suppression CircuitDongsheng Li, Yasuo Notohara, Masahiro Sano and Tatsuo Ando, Hitachi, Ltd., Japan; Hitachi Industrial Equipment Systems Co., Ltd., Japan; Hitachi Appliances, Inc., Japan
Poster Session: DC to DC Converters I
Room: Exhibit Hall A - WestChair: Bill Peterson
P5101 • A Family of Bidirectional DC-DC Converters Suitable for Asymmetrical Power Flow RequirementWu Chen, Guangjiang Wang and Xu Zhu, Southeast University, China
P5102 • A Center-Tapped Forward-flyback DC-DC Converter for Low Power ApplicationsSeungWoon Lee, Kyusik Choi, ByungChul Hyun and Bo-Hyung Cho, Seoul National Univ., Korea (South); Samsung Electronics, Korea (South)
P5103 • Single-switch ZVZCS Quasi-resonant CLL Isolated DC-DC Converter for Low-power 32” LCD TVSeung-Hee Ryu, Jung-Hoon Ahn, Byoung-Kuk Lee and Kwang-Seung Cho, Sungkyunkwan University, Korea (South); Samsung electro-mechanics co., ltd, Korea (South)
P5104 • A DC-DC Converter with Stacked Flyback ConvertersNavid Golbon, Farnaz Ghodousipour and Gerry Moschopoulos, Western University, Canada
P5105 • Interleaved Series Input Parallel Output Zero-voltage-switching converterHaixian Liu, Jinbin Zhao and Keqing Qu, Shanghai University of electric power, China; Shanghai University of Electric Power, China
P5106 • Increasing the Voltage and the Switching Frequency in a Dual Active Bridge Using a Normally-on SiC JFET in a Cascode ConfigurationAlberto Rodriguez, Aitor Vazquez, Marcos Fernandez, Diego G. Lamar and Marta M. Hernando, University of Oviedo, Spain
P5107 • A Dual Pulse Modulated Five-element Multi-resonant DC-DC Converter and Its Performance EvaluationsHiroto Mizutani, Tomokazu Mishima and Mutsuo Nakaoka, Kobe University, Japan; Kyungnam University, Korea, Republic of
P5108 • Adaptive Hybrid Primary/Secondary-side Digital Control for Series Resonant DC-DC Converters in 48V VR applicationsShangzhi Pan, Majid Pahlevaninezhad and Praveen Jain, Queen’s University, Canada
P5109 • High-reliability Long-backup-time Super UPS with Multiple Energy SourcesHaijin Li, Wenping Zhang and Dehong Xu, Zhejiang University, China
P5110 • Load Monitoring and Output Power Control in a Wireless Power Transfer System Without Any Wireless Communication FeedbackJian Yin, Deyan Lin, Chi Kwan Lee and S.Y.(Ron) Hui, The University of Hong Kong, Hong Kong
P5111 • Inductive Magnetic Harvester with Resonant Capacitive Rectifier Based on Synchronized Switch Harvesting TechniqueQian Sun, Sumeet Patil, Nian-Xiang Sun and Brad Lehman, Northeastern University, United States
P5112 • Magnetically Coupled Buck ConvertersTobias Schmid and Alexandr Ikriannikov, Volterra Semiconductor Corporation, United States
P5113 • Study of an Active Network DC-DC Boost Converter Based on Switched-inductorTing Wang, Yu Tang and Yaohua He, NanJing University of Aeronautics and Astronautics, China; NanJing University of Aeronautics and Astronauti, China
P5114 • Adaptive Voltage Positioning with Average Current Mode ControlRuqi Li, Tony O’Brien, John Lee, John Beecroft and Kenny Hwang, Cisco, Inc., United States; Cisoc, Inc., United States
P5115 • A High Efficiency Resonant Switched Capacitor Converter with Continuous Conversion RatioAlon Cervera, Michael Evzelman, Peretz Mor and Shmuel Ben-Yaakov, Ben Gurion University of the Negev, Israel; Ben-Gurion University of the Negev, Israel
W
2013 IEEE Energy Conversion Congress & Exposition® • 73Technical Program Schedule | Poster Sessions
P5116 • Inductor Optimization for Multiphase Interleaved Synchronous Bidirectional Boost Converter Working in Discontinuous Conduction Mode with Zero Voltage SwitchingAitor Vazquez, Alberto Rodriguez, Kevin Martin, Manuel Arias and Marta M. Hernando, University of Oviedo, Spain
P5117 • Elimination of Reactive Power in Dual Active Bridge By Hybrid of Phase Shift and PWM ControlXiaolei Hu, Kingjet Tseng, Shan Yin, Rudy Tjandra and Tao Wang, Nanyang Technological University, Singapore
Tuesday, September 17 3:30 pm – 5:00 pm
Poster Session: Converters for AC Grid Connectionof DC Distribution Systems
Room: Exhibit Hall A - NorthChair: Jon Are Suul
P5701 • Power Management Strategy for DC Microgrid Interfaced to Distribution System based on Solid State TransformerXunwei Yu, Xu She, Xijun Ni, Gangyao Wang and Alex Huang, NC State University, United States; North Carolina State University, United States
P5702 • Bidirectional 3-phase PFC Concept Based on an Integrated Inverting-link Current Source ConverterThiago Soeiro and Marcelo Lobo Heldwein, Federal University of Santa Catarina (UFSC), Brazil
P5703 • A High-efficiency Single-phase Bidirectional AC-DC Converter with Miniminized Common Mode Voltages for Battery Energy Storage SystemsBin Gu, Baifeng Chen, Jih-Sheng Lai and Jason Dominic, Virginia Tech, United States
Poster Session: Grid Integration of Electric Vehicles
Room: Exhibit Hall A - NorthChair: Seddik Bacha
P5901 • Combining Models to Assess the Impact of Electric Vehicles on an Evolving GridNorma Anglani, Fabrizio Fattori and Muliere Giuseppe, University of pavia, Italy; Provincial Administration of Pavia, Italy
P5902 • Reduced-capacity Smart Charger for Electric Vehicles on Single-phase Three-wire Distribution Feeders with Reactive Power ControlHidenori Tanaka, Toshihiko Tanaka, Takaaki Wakimoto, Eiji Hiraki and Masayuki Okamoto, Yamaguchi University, Japan; Ube National College of Technology, Japan
P5903 • V2G Integration and Experimental Demonstration on a Lab-scale MicrogridPatricio Mendoza-Araya, Phillip Kollmeyer and Daniel Ludois, University of Wisconsin - Madison, United States
P5904 • Smart Charging of Plug-in Hybrid Electric Vehicles (PHEVs) on the Residential Electric Grid regarding the Voltage PlanHarun Turker, Seddik Bacha and Ahmad Hably, Grenoble Electrical Engineering Laboratory, France; GIPSA-Lab, France
P5905 • Plug-in Vehicles Car Park Photovaltic Farm Construction for Cost and Emission ReductionsTan Ma and Osama Mohammed, IEEE Student Member, United States; IEEE Fellow, United States
Poster Session: Static Compensatorsand Active Power Filters
Room: Exhibit Hall A - NorthChair: Fang Zheng Peng
P6101 • An Overview of Grid Fundamental and Harmonic Components Detection MethodsYi Fei Wang and Yun Wei Li, Canadian Utilities Ltd, Canada; University of Alberta, Canada
P6102 • A Multi-loop Control System For Series DC Active Filter in a Medium-voltage DC AmplifierHesam Mirzaee, Subhashish Bhattacharya and Sandeep Bala, North Carolina State University, United States; ABB US Corporate Research Center, United States
P6103 • A 7.2 kV Experimental Setup of a Third Harmonic Hybrid Active Filter for Medium Voltage Utility ApplicationsJorge E. Hernandez, Rajendra P. Kandula, Frank Lambert, Deepak Divan and Santiago Grijalva, Georgia Institute of Technology, United States
P6104 • DC-side Series Active Power Filter for STATCOM Performance under System FaultsSaman Babaei and Subhashish Bhattacharya, North Carolina State University, United States
P6105 • Shunt Active Power Filter With Open-end Winding Transformer and Series Connected ConvertersGregory Carlos, Cursino Jacobina, Euzeli Santos, Edgard Fabricio and Nady Rocha, Federal Institute of Alagoas, Brazil; Federal University of Campina Grande, Brazil; Purdue School of Engineering and Technology, IUP, United States; Federal University of Paraiba, Brazil
P6106 • Shunt Compensator Based on 3-phase Interconnected ConvertersCursino Jacobina, Fabricio Edgard, Menezes Alysson, Correa Mauricio and Carlos Gregory, Federal University of Campina Grande, Brazil
P6107 • Modeling and Analysis of Harmonic Resonance in Power Electronics Based AC SystemsXiongfei Wang, Frede Blaabjerg, Zhe Chen and Weimin Wu, Aalborg University, Denmark; Shanghai Maritime University, China
Poster Session: Utility and Smart Grid Applications
Room: Exhibit Hall A - NorthChair: Yilmaz Sozer
P6301 • Virtual Netrual Point Selection for Three-leg Railway Power Quality ConditionerZhang Chunpeng, Jiang Qirong, Tian Xu and Wei Yingdong, Tsinghua University, China
P6302 • Modeling and Design of Multi-parallel-connected Static Synchronous Series Compensators with Daisy-chained TransformersSui Pung Cheung and Shu Hung Chung, City University of Hong Kong, Hong Kong
P6303 • An Improved Active Frequency Drift Anti-islanding Detection Method with Lower Total Harmonic DistortionWu Chen, Guangjiang Wang, Xu Zhu and Bo Zhao, Southeast University, China; Zhejiang Electric Power Test and Research Instit, China
N
N
N
N
74 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Poster Sessions
P6304 • Use of Hooke’s Law for Stabilizing Future Smart Grid — The Electric Spring ConceptChi Kwan Lee, Siew Chong Tan, Felix Wu, S.Y.(Ron) Hui and Balarko Chaudhuri, The University of Hong Kong, Hong Kong; Imperial College London, United Kingdom
P6305 • Development of A New Bridge-type Chopper for Low-voltage SMES ApplicationsJin Jianxun, Xu Wei, Chen Xiaoyuan, Zhang Yongchang, Zhou Xin and Xin Ying, University of Electronic Science and Technology, China; RMIT University, Australia; North China University of Technology, China; Innopower Superconductor Cable Co., Ltd., China
P6306 • Comparison on the Unbalanced-load Handling Capability of Two Power Electronic Transformer TopologiesXinyu Wang, Shaodi Ouyang, Jinjun Liu, Taotao Xu, Xiaojian Wang and Linyuan Zhou, Xi’an Jiaotong Univeristy, China; Xi’an Jiaotong University, China
P6307 • New Control Technique for Sensor-less Grid Synchronization of Modular Multilevel Converters for HVDC SystemsAndres Escobar, David Guzman, Juan Carlos Balda and Claudio Busada, University of Arkansas, United States; Universidad Nacional del Sur, Argentina
Poster Session: PM & IPM Machines
Room: Exhibit Hall A - EastChair: Patel Reddy
P5301 • Design and Analysis of Neodymium Free Spoke Type Motor with Segmented Wing Shape Permanent-magnet for Concentrating Flux DensityMohmmad Mizanoor Rahman, Kyung-Tae Kim and Jin Hur, University of Ulsan, Korea (South)
P5302 • Investigation of Radial Electromagnetic Force Density and Vibration in a Fractional-slot Interior Permanent Magnet Synchronous MachineWeizhong Fei and Patrick Luk, Cranfield University, United Kingdom
P5303 • Robust Design Optimization of Permanent Magnet Synchronous Machine Utilizing Genetic and Taguchi’s AlgorithmMazharul Chowdhury, Mohammad Islam, Abraham Gebregergis and Tomy Sebastian, Nexteer Automotive, United States
P5304 • Methods for Studying the Pareto-fronts of Multi-objective Design Optimization Problems of Electrical MachinesYao Duan, Qin Sun and Dan Ionel, University of Wisconsin, Milwaukee, United States; Georgia Institute of Technology, United States
P5305 • Optimal Design of a Special Permanent Magnet Synchronous Machine for Magnetocaloric RefrigerationChristophe Espanet, Christophe Kieffer, Stefan Giurgea, Frederic Gustin and Amine Mira, University of Franche-Comte, France; University of Technology of Belfort-Montbeliard, France
P5306 • Measuring Magnetic Properties of Synchronous Machines by Applying Angle Estimation Techniques Known from Sensorless ControlSascha Kuehl and Ralph Kennel, Technische Universitaet Muenchen, Germany; Technical University of Munich, Germany
P5307 • Operation and Design Principles of a PM Vernier MotorByungtaek Kim and Thomas A. Lipo, Kunsan national univ., Korea (South); University of Wisconsin-Madison, United States
P5308 • Design and Performance Improvement of a Line-start PMSMSolmaz Kahourzade, Amin Mahmoudi, Wooi Ping Hew and Mohammad Nasir Uddin, UM Power Energy Dedicated Advanced Centre, Malaysia; Lakehead University, Canada
P5309 • Winding Factors and Magnetic Fields in Permanent Magnet Brushless Machines with Concentrated Windings and Modular Stator CoresGreg Heins, Dan Ionel and Mark Thiele, Regal Beloit Corporation, Australia; Regal Beloit Corporation, United States; Charles Darwin University, Australia
P5310 • Morphing Parametric Modeling and Design Optimization of Spoke and V-type Permanent Magnet Machines by Combined Design of Experiments and Differential Evolution AlgorithmsPeng Zhang, Dan Ionel and Nabeel Demerdash, Marquette University, United States; Regal Beloit Corporation, United States
P5311 • Permanent Magnet Motor Capable of Pole Changing for High EfficiencyKazuto Sakai and Nariaki Yuzawa, Toyo University, Japan
P5312 • Explicit Criteria for Reluctance Torque Utility of Permanent Magnet MotorsTakahashi Akeshi, Maruyama Eri and Hatsuse Wataru, Hitachi, Ltd., Japan
P5313 • Modeling THE Electromagnetic Vibration of Interior Permanent Magnet Machines for Electric PropulsionIsaac Du, Lei Hao and Hejie Lin, General Motors, United States
P5314 • Energy Efficiency Comparison of SR and IPM Generators for Hybrid Electric VehicleKatsuhiko Urase, Kyohei Kiyota, Hiroya Sugimoto and Akira Chiba, Tokyo Institute of Technology, Japan
P5315 • Assessment of 12-slot, 14-pole Permanent Magnet Flux Switching Machine with Hybrid Excitation for Electric Vehicle ApplicationVipulkumar Patel and Jiabin Wang, The University of Sheffield, United Kingdom
P5316 • Novel Nonlinear Inductance Modeling of Permanent Magnet MotorDavid Woodburn, Thomas Wu, Louis Chow and Quinn Leland, University of Central Florida, United States; Air Force Research Laboratory, United States
P5317 • Reduction of Permanent Magnets in Small-Scale Wind TurbinesAdam Shea and Daniel Ludois, University of Wisconsin -Madison, United States; C-Motive Technologies Inc., United States
Poster Session: Induction Machines
Room: Exhibit Hall A - EastChair: Patel Reddy
P5501 • A Sensorless Field Oriented Controller for A Five-phase Induction Machine Under Open-circuit Phase FaultsAhmed Morsy, Ayman Abdel-Khalik, Ahmed Massoud and Shehab Ahmed, Faculty of Engineering, Alexandria University, United States; Faculty of Engineering, Alexandria University, Egypt; Qatar University, Qatar; Texas AM University at Qatar, Qatar
P5502 • Design of a Measuring System to Analyze the Power Transmission in the Slip Ring System in Double Fed Induction Generators (DFIG)A. T. Hermann Houenouvo, Robert Jensch and Wilfried Hofmann, TU- Dresden, Germany; Technical University Dresden, Germany
E
E
2013 IEEE Energy Conversion Congress & Exposition® • 75Technical Program Schedule | Poster Sessions
P5503 • DC Biased Stimulation Method for Induction Motor Parameters Identification at Standstill without Inverter Nonlinearity CompensationGuangtong Shen, Kai Wang, Wenxi Yao, Kevin Lee and Zhengyu Lu, Zhejiang University, China; Eaton Corporation, United States
Poster Session: DC to DC Converters II
Room: Exhibit Hall A - SouthChair: Brandon Pierquet
P6901 • Analysis and Design of a Three-level DC-DC Converter with Load Adaptive ZVS Auxiliary CircuitPritam Das, Majid Pahlevaninezhad, Aniruddha Mukherjee, Gerry Moschopoulos and Praveen Jain, National University of Singapore, Singapore; Queen’s University, Canada; University of Western Ontario, Canada
P6902 • Soft Switching Full-bridge Converter with a Wide ZVS Range and Reduced Parasitic OscillationZhong Chen, Shasha Liu, Yang Wang and Liangchen Shi, Nanjing University of Aero. and Astro., China
P6903 • Comparison of Multi-phase SAB Converters vs. Multi-phase SRC ConvertersAsier Garcia-Bediaga, Irma Villar, Ion Etxeberria-Otadui, Philippe Barrade and Alfred Rufer, IK4-IKERLAN Technology Research Center, Spain; LEI - EPFL, Switzerland
P6904 • Modeling of A Fixed-frequency Resonant LLC DC-DC Converter with Capacitive Output FilterXiaodong Li, Hong-Yu Li and Gao-Yuan Hu, Macau University of Science and Technology, Macau
P6905 • Optimal Design of a Class-E Resonant DriverMichael Evzelman and Mor Peretz, Ben Gurion University of the Negev, Israel; Ben-Gurion University of the Negev, Israel
P6906 • Design and Implementation of a Bidirectional Isolated Dual-active-bridge-based DC-DC Converter with Dual-phase-shift Control for Electric Vehicle BatteryYen-Ching Wang, Yen-Chun Wu and Tzung-Lin Lee, National Sun Yat-sen University, Taiwan
P6907 • Modeling Isolation Transformer Capacitive Components in a Dual Active Bridge Power ConditionerBabak Farhangi and Hamid A. Toliyat, Texas A and M University, United States
P6908 • Design and Control of a Single-stage Large Air-gapped Transformer Isolated Battery Charger for Wide-range Output Voltage for EV ApplicationsZaka Ullah Zahid, Cong Zheng, Rui Chen, William Eric Faraci, Jih-Sheng Lai, Matthew Senesky and Dave Anderson, Virginia Tech, United States; Virginia Tech, United States; Texas Instruments Incorporated, United States
P6909 • Closed loop D-Q Control of High-voltage High-power 3-phase Dual Active Bridge Converter in Presence of Real Transformer Parasitic ParametersAwneesh Tripathi, Kamalesh Hatua, Krishna Mainali, Dhaval Patel and Subhashish Bhattacharya, North Carolina State University, United States; Indian Institute of Technology Madras, India
P6910 • A Single-switch LCL-resonant Isolated DC-DC ConverterJianwu Zeng, Wei Qiao and Liyan Qu, University of Nebraska-Lincoln, United States
P6911 • Multi-objective Optimization and Design of a 500kHz Isolated Bidirectional DC-DC ConverterYu Du and Alex Huang, ABB US Corporate Research, United States; North Carolina State University, United States
P6912 • Improving Performance of a DC-DC Cascaded Converter System Using an Extra Feedback LoopReza Ahmadi and Ferdowsi Mehdi, Southern Illinois University Carbondale, United States; Missouri University of Science and Technology, United States
P6913 • Novel Bidirectional Snubberless Naturally Clamped ZCS Current-fed Full-bridge Voltage Doubler: Analysis, Design, and Experimental ResultsPan Xuewei and Akshay Rathore, National University of Singapore, Singapore
P6914 • Predictive Current Mode Control of Single Phase Dual Active Bridge DC to DC ConverterSumit Dutta and Subhashish Bhattacharya, North Carolina State University, United States
P6915 • Digital Fast-P Slow-ID Control DC-DC Converter Using A-D Converters in Different ResolutionsFujio Kurokawa, Ryuya Yoshida and Yudai Furukawa, Nagasaki University, Japan
P6916 • Non-isolated Bidirectional ZVT Converter with a Single Resonant Inductor for Energy Storage SystemJiTai Han, Chang-Soon Lim, Rae-Young Kim and Dong-Seok Hyun, Hanyang University, Korea (South)
P6917 • A ZVS Single-inductor Multi-input Multi-output DC-DC Converter with the Step Up/Down CapabilityHamidreza Keyhani and Hamid A. Toliyat, Texas A-and-M University - College Station, United States; Texas A and M University - College Station, United States
P6918 • Zero Voltage Switched Chopper with SiC-MOSFETsYukinori Tsuruta and Atsuo Kawamura, Yokohama National University, Japan
P6919 • Light-load Efficiency Optimization for Module Integrated Converters in Photovoltaic SystemsZhe Chen, Hongfei Wu, Longxian Ni, Kai Sun and Yan Xing, Nanjing Univ. of Aeronautics and Astronautics, China; Nanjing University of Aeronautics and Astronautics, China; Tsinghua University, China
P6920 • Efficiency Improvement of a Low-power Multiple-input Converter with Forward-conducting-bidirectional-blocking SwitchesRuichen Zhao and Alexis Kwasinski, Baker Hughes Incorporated, United States; The University of Texas at Austin, United States
P6921 • Loss Modeling and Optimization for Monolithic Implementation of the Three-level Buck ConverterBeomseok Choi and Dragan Maksimovic, University of Colorado at Boulder, United States; University of Colorado - Boulder, United States
P6922 • High Voltage Conversion Ratio, Switched C and L Cells, Step-down DC-DC ConverterOvidiu Pelan, Nicolae Muntean, Octavian Cornea and Frede Blaabjerg, “Politehnica” University of Timisoara, Romania; Institute of Energy Technology Aalborg, Denmark
P6923 • High Efficiency Power Amplifier Applying the Envelope Elimination and Restoration Technique with a Single Stage Envelope Amplifier with Ripple Cancellation NetworkDaniel Diaz, Oscar Garcia, Jesus A. Oliver, Pedro Alou, Miroslav Vasic, Jose A. Cobos, Moises Patino, David Tena and Francisco J. Ortega, Universidad Politecnica de Madrid, Spain
S
76 • 2013 IEEE Energy Conversion Congress & Exposition® Technical Program Schedule | Poster Sessions
P6924 • Reliability Analysis and Performance Degradation of a Boost ConverterMohammed Alam and Faisal Khan, University of Utah, United States
Poster Session: DC to AC and AC to AC Converters
Room: Exhibit Hall A - WestChair: Mor Peretz
P6501 • Switched-coupled-inductor InverterQin Lei, Fang Zheng Peng and Miaosen Shen, Michigan State University, United States; United Technology Research Center, United States
P6502 • Single-phase Power Compensation in a Current Source ConverterMontie Vitorino, Mauricio Correa and Cursino Jacobina, Federal University of Paraiba, Brazil; Federal University of Campina Grande, Brazil
P6503 • Improved Control Strategy for Modular 2 MVA AC-AC Power ConvertersCarlo Concari, Paolo Cova, Giovanni Franceschini, Andrea Toscani and Fulvio Bertoluzza, University of Parma, Dep. Ing. dell’Infomazione, Italy; POSEICO S.p.A., Italy
P6504 • A Comparative study of FPGA Based Cycloinverter with two Modulation TechniquesAnshul Agarwal and Vineeta Agarwal, NIT Hamirpur, India, India; MNNIT Allahabad, India, India
P6505 • Predictive Current Control of a Four-leg Indirect Matrix Converter with Imposed Source Currents and Common-mode Voltage ReductionCristian Garcia, Marco Rivera, Miguel Lopez, Jose Rodriguez, Patrick Wheeler, Ruben Pena, Jose Espinoza and Javier Riedemann, Universidad Tecnica Federico Santa Maria, Chile; Universidad de Talca, Chile; University of Nottingham, United Kingdom; Universidad de Concepcion, Chile
P6506 • AC-DC-AC Multilevel Converters Based on Three-leg ConvertersCursino Jacobina, Antonio Queiroz, Ayslan Maia, Edison da Silva and Alexandre Oliveira, Federal University of Campina Grande, Brazil
P6507 • 3-phase to 3-phase AC-AC DC-link Converters Based on Three-level and Two-level LegsLuciano de Macedo Barros, Cursino Jacobina, Alexandre Cunha Oliveira, Isaac Soares de Freitas and Edison da Silva, Federal University of Campina Grande, Brazil; Federal University of Paraiba, Brazil
P6508 • Bridgeless High Power Factor Buck-converter Operating in Discontinuous Capacitor Voltage ModeAbbas Fardoun, Nasrullah Khraim, Esam Ismail, Ahmad Sabzali and Mustafa Al-Saffar, United Arab Emirates University, United Arab Emirates; Al Ain Distribution Company, United Arab Emirates; College of Technological Studies, Kuwait
P6509 • Novel Topology Derivation for Low-common Mode Noise H-bridge Converters with Additional SwitchesJong-Won Shin, Hojoon Shin, Jung-Ik Ha and Bo-Hyung Cho, Virginia Polytechnic Institute and State Univers, United States; Seoul National University, Korea (South)
P6510 • X-source Inverter-A Generic Z-source Inverter StructureXinping Ding, Chenghui Zhang and Zhaoming Qian, Shandong University, China; Zhejiang University, China
P6511 • Common-mode Voltage Reduction with Two-phase Modulation in Three-level PWM InverterToshiji Kato, Kaoru Inoue, Kyu Takano and Ariyasu Aki, Doshisha University, Japan
P6512 • High-frequency Interleaved 3-phase Inverter with Novel Single Reference Six-pulse-modulation (SRSPM) TechniqueUdupi Rajagopal Prasanna and Akshay Rathore, University of Texas, Dallas, United States; National University of Singapore, Singapore
P6513 • Analytical Modelling of Modulation of Soft-switched Partial-resonant Link Inverter Suitable for PVIlija Pecelj, Sjoerd de Haan and Braham Ferreira, Delft University of Technology, Netherlands
P6514 • Ultra-sparse AC-link ConvertersMahshid Amirabadi, Jeihoon Baek and Hamid Toliyat, University of Illinois at Chicago, United States; Samsung Advanced Institute of Technology, Korea (South); Texas A and M University, United States
P6515 • Bidirectional Soft-switched AC-AC High Frequency Link ConverterAnkan De, Sudhin Roy and Subhashish Bhattacharya, NCSU, United States; North Carlina State University, United States; North Carolina State University, United States
Poster Session: Stability and Power Quality
Room: Exhibit Hall A - WestChair: Srdjan Lukic
P6701 • Stability Analysis of the Shunt Regulator in PCU with Describing Function MethodShiheng Wang, Xiaojie You, Hong Li, Ruixiang Hao and Trillion Q. Zheng, Beijing Jiaotong University, China
P6702 • Low Frequency Ripple Propagation Analysis in LLC Resonant Converter Based on Signal Modulation-demodulation Theory and Ripple Reduction Based on PIR Control StrategyXi Chen, Mengyin Ma, Shanxu Duan, Wen Cai and Changsong Chen, College of Electrical and Electronic Engineering, China; Huazhong University of Science and Technology, China
P6703 • Stable Control Design of Average Current Mode Control for Multi-phase Transformer-linked Type Boost Chopper CircuitIwamoto Kenta, Katsura Kenshiro, Kato Taiki and Yamamoto Masayoshi, Shimane University, Japan
P6704 • Performance Metrics for Small-signal Stability Assessment of DC-distributed Power-system-architecture ComparisonsSanna Vesti, Jesus A. Oliver, Roberto Prieto, Jose A. Cobos and Teuvo Suntio, Universidad Politecnica de Madrid, Spain; Tampere University of Technology, Finland
P6705 • Stability Analysis of Inverter Based Power Generation Emulator in Test-bed for Power SystemsLiu Yang, Xiaohu Zhang, Yiwei Ma, Jing Wang, Lijun Hang, Keman Lin, Leon Tolbert, Fred Wang and Kevin Tomsovic, University of Tennessee, United States; The University of Tennessee, United States
P6706 • Design and Performance Evaluation of Overcurrent Protection Schemes for Silicon Carbide (SiC) Power MOSFETsZhiqiang Wang, Xiaojie Shi, Yang Xue, Leon Tolbert, Benjamin Blalock and Fred Wang, The University of Tennessee, United States; University of Tennessee, United States
P6707 • Circulating Current Control and Reduction in a Paralleled Converter Test-bed SystemYiwei Ma, Liu Yang, Jing Wang, Xiaojie Shi, Fred Wang and Leon M. Tolbert, University of Tennessee, United States
W
W
Student Demonstrations
3-phase Back-to-back Inverter for Rapid Prototypingand Verification of Grid-connected Converters
Demonstrator: Elaina Chai (student)University: Massachusetts Institute of TechnologyAdvisor: Ivan Celanovic
High Frequency 3D Integrated Point of Load (POL) Modulewith PCB Embedded Inductor Substrate
Demonstrator: Yipeng SuUniversity: Virginia TechAdvisor: Fred C. Lee
400 Watt 27.12 Mhz Induction Heating
Demonstrator: Luke RaymondUniversity: University of MichiganAdvisor: Juan M. Rivas
Daisy-chain Transformer Structure for Current-balancing Multiple LED Strings
Demonstrator: Ruihong ZHANGUniversity: City University of Hong KongAdvisor: Henry Shu-hung CHUNG
Miniature Self-powered Stick-on Wireless Sensor Nodefor Monitoring of Overhead Power Lines
Demonstrator: Qiliang XuUniversity: University of California, BerkeleyAdvisor: Prof. Paul K. Wright and Prof. Richard M. White
A Soft-switching Isolated Multiport DC-DC Converterfor Simulataneous Power Management off Multiple Renewable Sources
Demonstrator: Jianwu ZengUniversity: University of Nebraska-LincolnAdvisor: Wei Qiao
Single-phase Electrolytic-capacitor-free Quasi-Z-source PV Inverter with Enhanced Reliability
Demonstrator: Yan ZhouUniversity: Florida State UniversityAdvisor: Dr. Hui Li
Implementation of a Distributed Control Algorithmfor Maximum Power Point Tracking in Differential Power Processing Photovoltaic Energy System
Demonstrator: Shibin QinUniversity: University of Illinois at Urbana-ChampaignAdvisor: Robert Pilawa-Podgurski
Reduction of Permanent Magnets in Small-scaleWind Turbines
Demonstrator: Adam SheaUniversity: University of Wisconsin – MadisonAdvisor: T.M. Jahns
Invited IFEC Project 1: Highly Efficient Microinverter for Photovoltaic Panels (Grand Prize and Best Efficiency Award)
Students: Chien-Yu Lin, John Li-Chung ChenUniversity: National Taiwan University of Science and TechnologyAdvisor: Prof. Chiu and Prof. Lo
Invited IFEC Project 2: Single Stage QR Flyback Non-electrolytic LED Driver (Best Engineering Achievement Award and Best Innovative Design Award)
Students: Kuan-Wen Lee, Yi-Hsun Hsieh, Hui-Wen Rebecca Liang, Hsiang-Feng Yu, Shih-Wen Tsai, Ching-Hsiang Chung and Ji Shiuan LiUniversity: National Cheng-Kung University, TaiwanAdvisor: Prof. Liang and Prof. Chen
Invited IFEC Project 3: Low Power Off-line Light-emitting Diode (LED) Driver with Long Lifetime (Grand Prize and Best Efficiency Award)
Students: Xiawei Wang, Shengpeng Tang, Yue Ma, Zhao Li, Siyang ZhaoUniversity: Zhejiang University, ChinaAdvisor: Prof. Wu
Invited IFEC Project 4: Highly Efficient Grid-tied Microinverter for Photovoltaic Panels (Best Engineering Achievement)
Student: Bin QianUniversity: Nanjing University of Aeronautics and AstronauticsAdvisor: Prof. Hu
Monday, September 16 4:00 pm – 6:30 pm | Tuesday, September 17 12:00 pm – 2:00 pm
Colorado Convention Center, Exhibit Hall A
In this event, 13 university student teams will demonstrate their hardware or video of hardware operations. The objective of this student demo program is to show the prototype built by the students to the industry participants and provide an opportunity for potential technol-ogy transfer from academic research to industry products. Student demonstrations will take place in Exhibit Hall A.
The demos are as follows:
2013 IEEE Energy Conversion Congress & Exposition® • 77
Exhibit Hall Floor Plan78 • 2013 IEEE Energy Conversion Congress & Exposition®
Exhibitor Listing
Alphabetical Listing by Company Name:
Company Booth(s)5S Components.....................................................................200Advanced MotorTech LLC ..................................................516ANSYS, Inc. ...........................................................................408Aperam Alloys USA .............................................................113Athena Energy Corp.............................................................103CD-adapco ............................................................................207Cobham Technical Services - Vector Fields ....................403CPS Technologies ................................................................315Current - Center for Electric Power ..................................101ELANTAS PDG, Inc. ..............................................................121Electron Energy Corporation ..............................................215Electronic Concepts, Inc. ...................................................409Ferroxcube USA, Inc. ..........................................................309Ford Motor Company ...........................................................216FREEDM Systems Center ....................................................208GaN Systems ........................................................................117GE Global Research .............................................................209GMW Associates .................................................................217GRAPES — NSF Center on Grid-Connected
Advanced Power Electronic Systems ..........................407Hitachi Metals America, Ltd...............................................109How2Power.com ..................................................................314IEEE ECCE 2014 .....................................................................313IEEE Industry Applications Society (IAS) .........................316IEEE Power Electronics Society (PELS) ...........................212Infolytica Corporation..........................................................512JFE Steel Corporation..........................................................506MagneForce Software Systems, Inc. ...............................317Magsoft Corporation ...........................................................306Mersen...................................................................................500National Renewable Energy Laboratory ..........................416Oak Ridge National Laboratory .........................................107 OPAL RT .................................................................................413Payton America Inc .............................................................307Plexim, Inc .............................................................................312Powerex, Inc. ........................................................................401Powersys (JMAG Division, JSOL Corporation) ...............417Proto Laminations, Inc. .......................................................213Shin-Etsu Magnetics Inc. ...................................................206Sidelinesoft, LLC ...................................................................115SMMA — The Motor and Motion Association ...............414TDK-Lambda Americas .......................................................202Tektronix, Inc. .......................................................................406Tridus Magnetics and Assemblies ....................................123VAC Sales USA, LLC ............................................................412Webcom Communications .................................................514Wiley ......................................................................................502
Numerical Listing by Booth Number:
Company Booth(s)Current - Center for Electric Power ..................................101Athena Energy Corp.............................................................103Oak Ridge National Laboratory .........................................107Hitachi Metals America, Ltd...............................................109Aperam Alloys USA .............................................................113Sidelinesoft, LLC ...................................................................115GaN Systems ........................................................................117ELANTAS PDG, Inc. ..............................................................121Tridus Magnetics and Assemblies ....................................1235S Components.....................................................................200TDK-Lambda Americas .......................................................202Shin-Etsu Magnetics Inc. ...................................................206CD-adapco ............................................................................207FREEDM Systems Center ....................................................208GE Global Research .............................................................209IEEE Power Electronics Society (PELS) ...........................212Proto Laminations, Inc. .......................................................213Electron Energy Corporation ..............................................215Ford Motor Company ...........................................................216GMW Associates .................................................................217Magsoft Corporation ...........................................................306Payton America Inc .............................................................307Ferroxcube USA, Inc. ..........................................................309Plexim, Inc .............................................................................312IEEE ECCE 2014 .....................................................................313How2Power.com ..................................................................314CPS Technologies ................................................................315IEEE Industry Applications Society (IAS) .........................316MagneForce Software Systems, Inc. ...............................317Powerex, Inc. ........................................................................401Cobham Technical Services - Vector Fields ....................403Tektronix, Inc. .......................................................................406GRAPES — NSF Center on Grid-Connected
Advanced Power Electronic Systems ..........................407ANSYS, Inc. ...........................................................................408Electronic Concepts, Inc. ...................................................409VAC Sales USA, LLC ............................................................412 OPAL RT .................................................................................413SMMA — The Motor and Motion Association ...............414National Renewable Energy Laboratory ..........................416Powersys (JMAG Division, JSOL Corporation) ...............417Mersen...................................................................................500Wiley ......................................................................................502JFE Steel Corporation..........................................................506Infolytica Corporation..........................................................512Webcom Communications .................................................514Advanced MotorTech LLC ..................................................516
2013 IEEE Energy Conversion Congress & Exposition® • 79
Exhibitor Directory
5S Components Booth 200
630 Fifth Avenue East McKeesport, PA 15035USA
P +1 [email protected]
5S Components is a leading distributor of electronic components for power electronics systems. WE offer ABB Power Semiconductors, current and voltage sensors. Additionally we have ICAR power film capacitors and Concept IGBT gate drivers.
Advanced MotorTech LLC Booth 516
4951 71st Avenue North Pinellas Park, FL 33781USA
P +1 [email protected]
Advanced MotorTech LLC is a global leader in electric machine design en-gineering with services in consulting, prototyping and training. Design and analysis uses advanced theory and 2D/3D FEA tools to produce unique ma-chines. Proof of Concept prototype development transforms new ideas into viable machines. Experience/expertise ranges from miniature machines to 1000’s of kW/HP; from design for high efficiency to high power densidy. AdvancedMotorTech - “Motor & Generator Innovation.”
ANSYS, Inc. Booth 408
225 W. Station Square DriveSuite 200Pittsburgh, PA 15219USA
P +1 [email protected]
ANSYS, Inc. develops and globally markets engineering simulation soft-ware used by designers and engineers across a broad spectrum of in-dustries. The company develops open and flexible simulation solutions that enable users to simulate design performance directly on the desktop, providing a common platform for fast, efficient and cost-effective product development, from design concept to final-stage testing and performance validation.
Aperam Alloys USA Booth 113
2650 Eisenhower Avenue Audubon, PA 19403USA
P +1 610.666.0293
Aperam Alloys is an integrated mill source, leader in the design, develop-ment, manufacture, and marketing of advanced specialty nickel and cobalt alloys, in cold rolled, long and hot rolled forms, in particular magnetic rotor and stator grades (ASTM801). Our products are primarily focused on aero-space, electrical safety, and automotive markets.
Athena Energy Corp. Booth 103
13602 Ulysses Court Bowie, MD 20720USA
P +1 [email protected]
Athena Energy Corp. designs custom embedded DC/DC, DC/AC systems, current sensors, and embedded energy products. Athena Energy also develops long-lived energy harvesting wireless sensors. Athena Energy provides customers all over the world with its high-performance Rogowski current sensors. Athena Energy provides world class sensors and design solutions for all your demanding applications.
CD-adapco Booth 207
60 Broadhollow Road Melville, NY 11747USA
P +1 631-549-2300www.cd-adapco.com
CD-adapco is the world’s largest independent CFD-focused provider of en-gineering simulation software, support and services. It has over 30 years of experience in delivering industrial strength engineering simulation to a wide range of industries and application.
Cobham Technical Services - Vector Fields Booth 403
1700 N. Farnsworth AvenueSuite 10Aurora, IL 60505USA
P +1 630.851.1734www.operafea.com
Cobham Technical Services - Vector Fields Software and its Opera suite have been at the forefront of electromagnetic design for two decades pro-viding one of the most innovative FEA simulation software on the market today. Opera’s accuracy and Multiphysics capabilities have made it an in-dustry favorite.
CPS Technologies Booth 315
111 South Worcester Street Norton, MA 02766USA
P +1 508-222-0614 [email protected]
CPS manufactures AlSiC heat spreaders for high thermal conductivity and device compatible thermal expansion. CPS’ AlSiC thermal management components including hermetic electronic packages, flip chip heat spread-er lids, IGBT base plates, pin fin coolers for hybrid electric vehicles (HEV) and AlSiC heat spreaders with embedded pyrolytic graphite for enhanced thermal conductivity.
80 • 2013 IEEE Energy Conversion Congress & Exposition®
Exhibitor Directory
Current - Center for Electric Power Booth 101
1520 Middle Drive Knoxville, TN 37996USA
P +1 [email protected]://curent.utk.edu
CURENT is a NSF Engineering Research Center established at University of Tennessee in 2011 that is jointly supported by NSF and the DOE. The part-ner schools include RPI, Northeastern University, and Tuskegee University. CURENT focuses on developing power systems and power electronics technologies for future transmission grids with high penetration of renew-able energy sources.
ELANTAS PDG, Inc. Booth 121
5200 N. Second StreetSt. Louis, MO 63147USA
P +1 314-622-8748 [email protected]/pdg
ELANTAS PDG, Inc. (formlerly The P.D. George Co.) is the global leader in liquid electrical insulation products, including magnet wire enamel, insu-lating resins, potting compounds, conformal coatings and a wide rage of specialty resin systems and adhesives, ISO 9001, TS 16949. A Heritage of Innovation since 1919.
Electron Energy Corporation Booth 215
924 Links Avenue Landisville, PA 17538USA
P +1 717-898-2294
Electron Energy Corporation (EEC) founded in 1970, is a US supplier that of-fers unmatched expertise in rare earth magnets, assemblies and systems. EEC is dedicated to improving rare earth magnet performance to meet the most technically demanding applications in aerospace, military, medical, electronics, and motion control markets.
Electronic Concepts, Inc. Booth 409
526 Industrial Way West Eatontown, NJ 07724USA
P +1 [email protected]
Electronic Concepts, Inc. is the recognized leader in film capacitor design and manufacture. Our vertical integration and innovative design capabili-ties offers the flexibility to meet any requirements. Serving a broad range of electronic industry markets since 1969.
Ferroxcube USA, Inc. Booth 309
1200 Golden Key Circle #223 El Paso, TX 79925USA
P +1 [email protected]
Leading in soft ferrite technology. Building on our Philips magnetic compo-nents heritage, FERROXCUBE can offer customers the highest level of sup-port in the development of their new innovative designs. Our competencies cover soft ferrite products, materials, and accessories. All are developed to meet today’s demanding high-frequency, low-loss and environmental requirements.
FREEDM Systems Center Booth 208
1791 Varisty Drive, Suite 100 Raleigh, NC 27695 USA
P +1 [email protected] www.freedm.ncsu.edu
The FREEDM Systems Center is an Engineering Research Center (ERC) where researchers work with industry to develop an efficient and inter-active power grid that utilizes revolutionary power electronics technology and information technology. The FREEDM System integrates distributed re-newable energy sources and energy storage with exist ing power systems, while also automating the management of load, generation, and storage.
Ford Motor Company Booth 216
2400 Village Road Dearborn, MI 48124USA
P +1 [email protected]
Ford Motor Company, a global automotive industry leader based in Dear-born, Michigan, manufactures or distributes automobiles across six con-tinents. With about 172,000 employees and 65 plants worldwide, the com-pany’s automotive brands include Ford and Lincoln.
GaN Systems Booth 117
300 March Road#501Ottawa, ON, K2K 2E2 [email protected]
P +1 613-686-1996www.gansystems.com
GaN Systems is the first place systems designers go to realize all of the benefits of gallium nitride in their power conversion and control applica-tions. To overcome silicon’s limitations in switching speed, temperature, voltage, and current, the Company develops the most complete range of gallium nitride power switching solutions for a variety of markets.
2013 IEEE Energy Conversion Congress & Exposition® • 81
Exhibitor Directory
GE Global Research Booth 209
1 Reseach Circle Niskayuna, NY 12309USA
P +1 [email protected]/research
GE Global Research is the hub of technology development for all of GE’s businesses. Our scientists and engineers redefine what’s possible, drive growth for our businesses and find answers to some of the world’s tough-est problems. We innovate 24 hours a day, with sites in the US, India, China, Germany, and Brazil.
GMW Associates Booth 217
955 Industrial Road San Carlos, CA 94070USA
P +1 [email protected]
GMW will show magnetic sensors and instruments for the voltage isolated measurement of electric current and voltage: PCB mounting current sen-sors with full-scale ranges from +/-0.25A to +/-85A and frequency response from DC to 400kHz; clip-on Rogowski coil AC current probes to 30MHz; very high accuracy current transducers to 24kA and voltage transducers to 8kV.
GRAPES — NSF Center on Grid-ConnectedAdvanced Power Electronic Systems Booth 407
2055 S. Innovation WayFayetteville, AR 72701USA
P +1 [email protected]
The mission of the GRAPES NSF Industry/University Cooperative Research Center on GRid-connected Advanced Power Electronics Systems is to ac-celerate the adoption and insertion of power electronics into the electric grid in order to improve system stability, flexibility, robustness, and econo-my. We accomplish that mission through the development of people, tech-nologies, software, and tools that modernize the grid.
Hitachi Metals America, Ltd. Booth 109
28175 Haggerty RoadNovi, MI 48377USA
P +1 [email protected]
Hitachi Metals is an internationally recognized integrated supplier of highly functional component materials. Our main business lines are castings, steel-related products, magnetic products and electronic materials. Hi-tachi Metals is prepared to support your project from conceptual design based on our long experience with magnetic materials and circuit design.
How2Power.com Booth 314
P.O. Box 755Smithtown, NY 11787USA
P +1 [email protected]
A free power electronics website for engineers, students, and instructors. Great source of practical design information. Features a search tool, direc-tories, and career information. A monthly newsletter (How2Power Today) goes deep into power supply topologies, control methods, circuits, mag-netics, test, and the latest SiC & GaN developments.
IEEE ECCE 2014 Booth 313
GE Global Research Center, 1 Research Circle Niskayuna, NY 12309 USA
P +1 518-387-6660 [email protected]
ECCE 2014 will celebrate the sixth edition of the Energy Conversion Con-gress and Exposition in the city of bridges Pittsburgh Pennsylvania. ECCE has grown to become the foremost technical conference and exposition for people looking for energy conversion solutions: solutions that are time-ly, practical, customer focused, market sensitive, and cost effective. Be a part of the greatest annual assemblage of energy conversion profession-als, consisting of both industry veterans and fresh startups. Be a part of the action, be present to network; establish and nurture relationships with your future customers while also renew and reinforce relationships with your present customers.
IEEE Industry Applications Society (IAS) Booth 316
Piscataway, NJ 08854USA
P +1 [email protected]
The Industry Applications Society supports the advancement of the theory and practice of electrical and electronic engineering in the development, design, manufacture and application of electrical systems, apparatuses, devices and controls to the processes and equipment of industry and com-merce; the promotion of safe, reliable and economical installations; indus-try leadership in energy conservation and environmental health and safety issues; the creation of voluntary engineering standards and recom mended practices; and the professional development of its membership.
82 • 2013 IEEE Energy Conversion Congress & Exposition®
Exhibitor Directory
IEEE Power Electronics Society (PELS) Booth 212
445 Hoes Lane Piscataway, NJ 08854
P +1 [email protected]
IEEE Power Electronics Society (PELS) is one of the fastest growing techni-cal societies of the IEEE. For over 20 years, PELS has facilitated and guided the development and innovation in power electronics technology. Our 7,000 members include preeminent researchers, practitioners, and distinguished award winners. PELS major publication is the IEEE Transactions on Power Electronics, a top referenced journal among all IEEE publications.
Infolytica Corporation Booth 512
300 Leo-Pariseau, Suite 2222Montreal, QC H2X4B3Canada
P +1 [email protected]
Infolytica offers accurate design and analysis software. MagNet 2D/3D electromagnetic field simulations lets you virtually prototype any device. MotorSolve combines electromagnetic & thermal models of your electric machine in one design environment: brushless DC, induction, PMAC, SRM, PMDC, wound Field and more. New export to OPAL-RT eDRIVEsim. Free trials available from our web site.
JFE Steel Corporation Booth 506
2-3, Uchisaiwai-cho, 2-Chome, Chiyoda-kuTokyo, 100-0011Japan
P +1 [email protected]://www.jfe-steel.co.jp/
JFE Steel pof Japan is one of the leading steel mills in the world with 30 minllion tons of steel production and over 46,000 employees worldwide. JFE is widely known for its high quality and innovative products.
MagneForce Software Systems, Inc. Booth 317
5655 South Park AvenueHamburg, NY 14075USA
P +1 [email protected]
Software for design and simulation of rotating electric machinery. Mag-neForce products combine finite element techniques together with vari-ous time based circuit models to provide a total electric machine design environment. Analysis of both the machine and the associated drive/load circuitry allows MagneForce to produce both steady-state and transient results. MagneForce simulators compute directly all machine performance parameters and circuit waveforms including iron loss. This is all done in an easy to learn and use Windows environment.
Magsoft Corporation Booth 306
1 Fairchild Square Suite 108Clifton Park, NY 12065USA
P +1 518-877-8390philippe.wendling@magsoft-fl ux.comwww.magsoft-fl ux.com
Take control of your design, adopt Magsoft’s suite of CAE tools, Flux, GOT-It, PORTUNUS, Motor-CAD and SPEED. In a green world, develop optimized designs of motors, actuators, and power conversion and distribution equip-ment. More than just tools, experience Magsoft’s high level, industry expe-rienced, customer support, dedicated training and specialized consulting.
Mersen Booth 500
374 Merrimac Street Newburyport, MA 01950USA
P +1 978-462-6662http://ep-us.mersen.com/
Mersen is a global expert in materials and equipment for extreme envi-ronments and in demanding electrical applications in safety and reliability. Globally, thousands of sales representatives and distributors provide expe-rienced teams of engineers supporting you in selecting the right product at the right cost for your power electronics application.
National Renewable Energy Laboratory Booth 416
15013 Denver West Parkway Golden, CO 80401
P +1 [email protected]
The National Renewable Energy Laboratory (NREL) is the nation’s primary laboratory for renewable energy and energy efficiency research and de-velopment (R&D). NREL’s Mission: NREL develops renewable energy and energy efficiency technologies and practices, advances related science and engineering, and transfers knowledge and innovations to address the nation’s energy and environmental goals.
Oak Ridge National Laboratory Booth 107
National Transportation Research Center2360 Cherahala BoulevardKnoxville, TN 37932USA
P +1 [email protected]://peepsrc.ornl.gov
Oak Ridge National Laboratory (ORNL) is a multi-program science and technology laboratory managed by UT-Battelle, LLC. ORNL’s power elec-tronics and electric machinery staff has renowned contributions in power electronics, electric traction motor design and development for light duty electrified vehicles, wide bandgap semiconductor characterization, power module packaging and application in compact power converters and trac-tion inverters.
.
2013 IEEE Energy Conversion Congress & Exposition® • 83
Exhibitor Directory
OPAL RT Booth 413
1751 Richardson #2525 Montreal, QC H3K1G6Canada
P +1 [email protected]
From imagination... to real-time. OPAL-RT TECHNOLOGIES is a world lead-ing developer of open, real-time digital simulators and hardware-in-the-loop testing equipment for electrical, electro-mechanical and power elec-tronics systems. Its simulators are used by engineers and researchers at leading manufacturers, utilities, universities and research centers around the world. Its unique technological approach integrates parallel, distrib-uted computing with COTS technologies.
Payton America, Inc. Booth 307
1805 S. Powerline Road, Suite 109Deerfi eld Beach, FL 33441USA
P +1 [email protected]
Payton America, Inc. is the world leader in the design and manufacturing of planar transformers and inductors. Custom designs using standard parts with no NRE, samples in few weeks from few watts to 90kW in a single unit. Our design team and our ISO/TS/AS production facilities in Florida, Israel and China can handle all SMPS projects.
Plexim, Inc. Booth 312
5 Upland Road, Suite 4Cambridge, MA 02140USA
P +1 [email protected]
Plexim’s electrical engineering software PLECS is a complete power elec-tronics system simulation package that yields robust and fast results. Avail-able in two versions, PLECS Blockset works in the MATLAB/Simulink envi-ronment while PLECS Standalone offers an independent solution. Included with PLECS is a comprehensive component library, which covers not only the electrical, but also the magnetic, mechanical, and thermal aspects of power conversion systems and their controls.
Powerex, Inc. Booth 401
173 Pavilion Lane Youngwood, PA 15607USA
P +1 [email protected]
Powerex turns ideas into cost-effective products and is a leading supplier of discrete devices, modules, and integrated high power semiconductor solutions.
Powersys (JMAG Division, JSOL Corporation) Booth 417
2-5-4 Harumi, Chuo-ku Tokyo, 104-0053Japan
P +1 81-80-3250-9001http://www.jmag-international.com
JMAG is a comprehensive FEA software solution for electromechanicla equipment design and development. To capture and reproduce the phe-nomenon in a product accurately in the analysis, accurate and precise modeling is essential. The higher the accuracy of a model, the higher the analysis resolution becomes to include the effects of slight differences in model geometry and properties.
Proto Laminations, Inc. Booth 213
13666 East Bora Drive Santa Fe Springs, CA 90670USA
P +1 [email protected]
Proto Laminations specializes in the manufacture of laser cut and stamped short-run laminations for rotating machinery in support of the development, prototype evaluation and limited production needs of academic institutions and motor and generator manufacturers worldwide.
Shin-Etsu Magnetics, Inc. Booth 206
909 Parkview BoulevardLombard, IL 60148USA
P +1 [email protected]://www.shinetsu-rare-earth-magnet.jp/e
Shin-Etsu is a fully licensed producer of sintered NdFeB and SmCo rare-earth magnets. Dy-Free NdFeB grades are available now! Our new Grain Boundary Diffusion magnets reduce Dy by 50% or more, and can even eliminate Dy completely, while increasing induction. Visit our booth to leard how Shin-Etsu innovation reduces magnet costs!
Sidelinesoft, LLC Booth 115
931 Mansfi eld DriveFort Collins, CO 80525USA
P +1 [email protected]
Sidelinesoft presents NL5 Circuit Simulator: a unique simulation tool work-ing with true ideal components. Its robust proprietary algorithm provides fast and reliable simulation, not distracted by convergence problems, which makes it especially efficient during the concept design stage of a project. NL5 is powerful and versatile, yet easy to use and user-friendly.
84 • 2013 IEEE Energy Conversion Congress & Exposition®
Exhibitor Directory
SMMA — The Motor and Motion Association Booth 414
P.O. P182 South Dartmouth, MS 02748USA
P +1 [email protected]
SMMA – The Motor & Motion Association is the North American trade as-sociation, with a global focus, representing fractional horsepower electric motor and drives manufacturers, and suppliers to the industry. Manage-ment and engineering topics are addressed at semi-annual conferences, SMMA Motor & Motion College courses and the Electric Motor Education & Research Foundation (EMERF).
TDK-Lambda Americas Booth 202
405 Essex Road Neptune, NJ 07753USA
P +1 732-922-9300 [email protected]/hp
GenesysTM AC-DC power supplies provide high power density, low ripple and complete user-friendly interfaces, Highest power density 2400W in 1U. Identical family interfaces. Platforms 750W, 1500W, 2.4kW, 3.3/5kW, 0/15kW. Outputs available up to 600V and 1000A. Standard RS-232/RS-485 and Re-mote Analog Programming. Optional LAN, IEEE or Isolated Analog Control.
Tektronix, Inc. Booth 406
14150 SW Karl Braun Drive Beaverton, OR 97077USA
P +1 [email protected]
For more than sixty-five years, engineers have turned to Tektronix for test, measurement and monitoring solutions to solve design challenges, im-prove productivity and dramatically reduce time to market. Tektronix is a leading supplier of test equipment for engineers focused on electronic de-sign, manufacturing, and advanced technology development.
Tridus Magnetics and Assemblies Booth 123
1145 W. Victoria StreetRancho Dominguez, CA 90220USA
P +1 [email protected]
Tridus provides customers with a low cost and high reliability path to China magnet manufacturing. Its technology and magnet solutions results in mil-lions of magnets and magnet assemblies shipped globally. With a reliable and quality embedded supply-chain that spans from rare earth smelting and separation to complex value-added assembly products, Tridus demon-strates high standards for quality, exceptional levels of service, competi-tive pricing, and efficient supply chain management.
VAC Sales USA, LLC Booth 412
2935 Dolphin Drive, Suite 102Elizabethtown, KY 42701USA
P +1 [email protected]
VACUUMSCHMELZE — a manufacturer of advanced magnetic materials — produces Rare Earth Permanent Magnets, Soft Magnetic Materials & Parts, and Cores & Inductive Components. A world leader in development, production and application know-how of magnetic materials, VAC supports customers selecting innovative materials and customizes unique materials for optimized solutions.
Webcom Communications Booth 514
7355 E. Orchard Road, Suite 100 Greenwood Village, CO 80111USA
P +1 720-528-3770 [email protected]
Webcom Communications Corp. is an integrated media company serving advanced technology industries and markets worldwide through its maga-zines, events, websites, eNewsletters, online media, directories, buyers guides, market reports, data products and marketing services. Webcom’s products and services serve numerous markets and industries including electronics, IT, telecommunications, manufacturing, automation, infra-structure, lighting, materials, instrumentation, power, renewable energy, utilities, natural resources and healthcare.
Wiley Booth 502
111 River Street Mailstop 4-02Hoboken, NJ 07030USA
P +1 [email protected]
Founded in 1807, John Wiley & Sons, Inc. is an independent, global publish-er of print and electronic products. Wiley specializes in scientific and tech-nical books, journals, textbooks and education materials, and professional and consumer books and subscription services. Our business publishes on behalf of more societies and membership associations than anybody else, and offers libraries and individuals 1,250 online journals, thousands of books and e-books, reviews, reference works, databases, and more.
2013 IEEE Energy Conversion Congress & Exposition® • 85
Conference > September 14-18, 2014 Exposition > September 15-16, 2014
The 6th Annual IEEE Energy Conversion Congress and Exposition (ECCE 2014) will be held in Pittsburgh, Pennsylvania, on September 14-18, 2014. The conference will bring together practicing engineers, re-searchers and other professionals for interactive discussions on the latest advances in various areas related to energy conversion. ECCE has grown to become the foremost technical conference and exposition for people looking for energy conversion solutions; solutions that are timely, practical, customer focused, market sensitive and cost effec-tive. Engineers from throughout the energy conversion industry’s broad spectrum come to ECCE specifically to take advantage of the concen-trated brain trust assembled annually in one very special location to do business in a convivial and innovative atmosphere, a perfect blend of state of the art technical prowess and commercial opportunities under one roof.
> Call for Tutorials
The ECCE organizing committee invites proposals for half-day tutorials to be presented on Sunday September 14. The organizing committee is particularly interested in tutorials that are of value to the practicing engineer, with an emphasis on solutions to practical problems. Tutorials are solicited on any subject pertaining to the scope of the conference that includes, but is not limited to, the major topics listed below.
Energy Conversion Systems and their Technologies
> Electrical systems for the Oil & Gas, mineral and mining sectors > Technologies and systems for energy storage > Transmission / Distribution and smart grid applications > HVDC, FACTS, renewable energy integration, distributed resources
and micro-grids, V2G-G2V > Renewable and alternative energy systems > Low-loss energy conversion and energy saving systems, their en-
ergy management methodologies and algorithms > Energy conversion and storage systems for Information Technolo-
gies (IT), e.g. computing, data centers, communication networks > Technologies and systems for energy harvesting > Transportation systems for people and goods, e.g. electric and hy-
brid vehicles, including marine and aerospace applications > Quality indexes and standards for energy conversion systems
Components and Materials for Energy Conversion
> New materials of interest for energy conversion > Design of electromechanical converters > Drives and control of electromechanical converters > Power conversion circuits, switching devices and control > Passive components and their constitutive materials > Design of packaging and integration, both at the component and
system level > Multiphysics modeling of components and systems > Measurement techniques, sensors and EMC aspects > Reliability, diagnostics and prognostics
Tutorials accepted for presentation will receive one conference regis-tration together with an honorarium for $1,000. Note that publication of a technical paper at the conference will still require a full paid registra-tion.
Important Dates
February 14th, 2014
Submissions of one page abstract of proposed tutorial.
March 24th 2014
Notification of acceptance. Accepted tutorials will be advertised by the committee after this date.
July 1st, 2014
Full tutorial materials must be submitted for publication in the tutorials book.
2014.ecceconferences.org
Pittsburgh, Pennsylvania
September 14-18, 2014
Digest Submission Guidelines
Tutorial proposals should be submitted as a digest summariz-ing the content of the tutorial. Please follow the tutorial propos-al form (on the next page) as the tutorial submission guideline. Please submit the digest and any questions regarding this call
directly to the Tutorials Chair, Khwaja Rahman, via email at
[email protected]. For more conference information, please visit http://2014.ecceconferences.org.
ECCE 2014 Tutorials Chair
Khwaja Rahman, General Motors Global Electrification, USA
Title of Tutorial
Abstract
(500 word limit. If the tutorial is accepted, this abstract will be published in the conference web page, program, and proceedings.)
Outline of Tutorial
(Outline would only define the topics and the subtopics that would be covered. No detail descriptions should be included in the proposal.)
Lead Instructor
Name Affiliation
Email Phone
Other Instructor
Name Affiliation
Email Phone
Instructor Bios
(~150 words each. Please provide a brief biography of each instructor, describing the qualifications for presenting the proposed tutorial, including the work and publications that are most relevant to the proposal.)
> Tutorial Proposal Form
The 6th Annual IEEE Energy Conversion Congress and Exposition (ECCE 2014) will be held in Pittsburgh, Pennsylvania, USA on September 14-18, 2014. ECCE is the pivotal international conference and exposition event around electrical and electromechanical energy conversion. ECCE 2014 will feature both industry-driven and application-oriented techni-cal sessions, as well as industry expositions and seminars. ECCE 2014 will bring together researchers from industry and academia, application engineers and other professionals for interactive and multidisciplinary discussions on the latest advances in various areas of industrial rel-evance related to classical electromagnetism and materials for energy conversion.
Technical papers are solicited on any subject pertaining to the scope of the conference that includes, but it is not limited to, the following major topics:
Energy Conversion Systems and their Technologies
> Electrical systems for the Oil & Gas, mineral and mining sectors > Technologies and systems for energy storage > Transmission / Distribution and smart grid applications > HVDC, FACTS, renewable energy integration, distributed resources
and micro-grids, V2G-G2V > Renewable and alternative energy systems > Low-loss energy conversion and energy saving systems, their en-
ergy management methodologies and algorithms > Energy conversion and storage systems for Information Technolo-
gies (IT), e.g. computing, data centers, communication networks > Technologies and systems for energy harvesting > Transportation systems for people and goods, e.g. electric and hy-
brid vehicles, including marine and aerospace applications > Quality indexes and standards for energy conversion systems
Components and Materials for Energy Conversion
> New materials of interest for energy conversion > Design of electromechanical converters > Drives and control of electromechanical converters > Power conversion circuits, switching devices and control > Passive components and their constitutive materials > Design of packaging and integration, both at the component and
system level > Multiphysics modeling of components and systems > Measurement techniques, sensors and EMC aspects > Reliability, diagnostics and prognostics
> Call for Papers
Paper Submission Guidelines
Prospective authors must submit a digest — no longer than five (5) pages — summarizing the proposed paper. The text must be single column, single spaced. No indication of author names and affiliations is allowed in the digest. Deviations from these essential requirements will be grounds for immediate rejection. The digests must clearly state the objectives of the work, its significance in advancing engineering or science, as well as the methods and specific results in sufficient detail. The digest should include key equations, figures, tables and references as appropriate. The digests will be reviewed using a double-blind peer review process to ensure confidentiality and fair review. Please refer to the conference website for a detailed list of topics and the digest submission method.
Pittsburgh is “The City of Bridges” crossing its three rivers and located in the Appalachian mountains, renowned for their scenic beauty. The climate in September offers a pleasant mild balance between summer and winter conditions. Pittsburgh — known as “Steel City“ too — has a remarkable industrial tradition in the metallurgy and electrical sectors. Such a heritage has evolved today towards a diversified blend of mod-ern world-class academic institutions, national laboratories and multi-national companies. Nowadays Pennsylvania is also a innovation center for the different technologies around the expanding Oil & Gas sector. The conference will be held at LEED gold certified David L. Lawrence Convention Center, which is located in the hub of Pittsburgh’s cultural, business and entertainment district.
For more information, please visit http://2014.ecceconferences.org/or contact the ECCE 2014 Technical Program Chairs via email at [email protected]. For exhibiting at ECCE 2014, please contact conference exhibition Chair at [email protected] and for partici-pating in the products and services session please contact the tech-nical program chairs. For more about Pittsburgh and its surrounding areas, please visit http://pittsburghpa.gov/.
ECCE 2014 Technical Program Chairs
Lixiang Wei, Rockwell Automation, USAPierluigi Tenca, GE Global Research, GermanyNicola Bianchi, University of Padova, ItalyWen Soong, University of Adelaide, Australia
Important Dates
January 15th, 2014
Digests submitted via the website.
May 1st, 2014
Notification of acceptance or rejection.
July 1st, 2014
Final papers with IEEE copyright forms.
2014.ecceconferences.org
Pittsburgh, Pennsylvania
September 14-18, 2014
Conference > September 14-18, 2014
Exposition > September 15-16, 2014
The 6th Annual IEEE Energy Conversion Congress and Exposition (ECCE 2014) will be held in Pittsburgh, PA, on September 14-18, 2014. The conference will bring together researchers from industry and academia, application engineers and other professionals for interactive and mul-tidisciplinary discussions on the latest advances in various areas of in-dustrial relevance related to classical electromagnetism and materials for energy conversion. ECCE has grown to become the foremost techni-cal conference and exposition around electrical and electromechanical energy conversion. It focuses on solutions that are industrially oriented. People from a broad spectrum of the energy conversion industry gather yearly at ECCE to interact in a convivial and innovative atmosphere, perfect blend of state the art, technical prowess and commercial op-portunities in one attractive location.
The ECCE organizing committee invites persons interested in organiz-ing Special Technical Sessions. Such sessions consist of oral presenta-tions only, without written papers and are strongly oriented towards the interests of industry, as well as academia. Presentations might be of a somewhat more commercial nature than those related to the papers in the standard technical sessions.
> Call for Special Session Organizers
Presentations are solicited on any subject pertaining to the scope of the conference described in its Call for Papers (obtainable online from 2014.ecceconferences.org), but those that will address the following aspects of growing interest and innovation are preferred:
> Innovative materials for improved components and/or systems in electrical and electromechanical energy conversion.
> Components and systems for electrical applications in the oil & gas and mining sectors.
> Technologies and systems for large, cycle-efficient and cycle-in-tensive energy storage.
> Modelling of materials oriented to improve the estimation of the energy efficiency in the components and systems using them.
> Reliability, diagnostics and prognostics of components and modu-lar systems.
Digest Submission Guidelines
Session organizers are requested to submit a digest (5 pages maxi-mum) summarizing the proposed special session with 4 or 8 presenta-tions. The digest should contain the session title, session organizer, title of each presentation, presenter for each presentation (with a short bi-ography) and a summary of each presentation. Please submit the digest directly to ECCE 2014 Technical Program Committee Chairs via email at [email protected].
Please visit 2014.ecceconferences.org for additional conference infor-mation. For exhibiting at ECCE 2014, please contact conference Ex-hibition Chair at [email protected]. For more about Pittsburgh and its surrounding areas, please visit http://pittsburghpa.gov. For submission and information regarding the ECCE 2014 Special Ses-sions, please contact the ECCE Technical Program Committee Chairs ([email protected]).
ECCE 2014 Technical Program Chairs
Lixiang Wei, Rockwell Automation, USAPierluigi Tenca, GE Global Research, GermanyNicola Bianchi, University of Padova, ItalyWen Soong, University of Adelaide, Australia
Important Dates
March 31st, 2014
Proposal submissions of one page digest of proposed presentation.
May 1st, 2014
Notification of session acceptance.
2014.ecceconferences.org
Pittsburgh, Pennsylvania
September 14-18, 2014
> Pittsburgh, PA
David L. LawrenceConvention Center1000 Fort Duquesne Boulevard | Pittsburgh, PA 15222Phone: (412) 565-6000 | www.pittsburghcc.com
2014.ecceconferences.org
> Save the date
SPONSORED BY THE IEEE POWER ELECTRONICSAND INDUSTRY APPLICATIONS SOCIETIES
Conference > September 14-18, 2014
Exposition > September 15-16, 2014
> ECCE 2014 — What’s the Tagline? Enter your tagline for a chance to win! Visit the ECCE registration
desk by the end of the conference and submit your suggested
tagline for ECCE 2014 in Pittsburgh, PA
and win a discounted registration!