professional instruments - ghm group › fileadmin › infothek › ... · industrial measurement...
TRANSCRIPT
Professional InstrumentsMade in Germany
www.ghm-group.de
Made in Germany
Following the merger of the companies GREISINGER electronic, Honsberg Instruments and Martens Elektronik in 2009, GHM Messtechnik was established, thus providing enhanced competence for all aspects of measurement and industrial electronics. In March 2010, Imtron Messtechnik was integrated as fourth company into the GHM group, in July 2013 these companies were merged to form GHM Messtechnik. With the acquisition of Delta Ohm from the region of Padua the wide offering of GHM has been expanded with devices for environmental measurement technology. With approx. 250 employees and more than 30 developers at the six locations Erolzheim, Regenstauf, Remscheid, Barsbüttel, Owingen, Kassel and Padua we are offering an extensive product portfolio for the requirements of thefollowing segments:
Our sales network with several sales engineers covering whole Germany and Austria, provides excellent technical support. Furthermore there is a world-wide presence with GHM sales subsidiaries in the Czech Republic, Denmark, South Africa and the Netherlands, as well as sales representatives and representations all over Europe, North and South America, Asia, and Africa.
The GHM Messtechnik companies develop and manufacture all devices and systems exclusively in Germany. With the merger, the product portfolio increased significantly. Well-known corporations appreciate our quality „Made in Germany“.
As a specialist and full-range supplier of measurement technology we develop customized and market-driven solutions for you, matching the high demands of the industry.
GHM GROUP
Quality „Made in Germany“
Our Ambition - Your Advantage
• Industrial Electronics• Industrial Electronics• Control Technology
• Process Engineering• Industrial Measurement• Test Bench Measurement
• Metrology
State-of-the-art 3D CAD systems for development of inhouse and customer-specific products.
2
SIL 2
DE K RA Cer t i f i c a t i on Gm bH * Hand we rk s t raße 15 * D-705 65 S t u t t ga r t * www. d ek ra -c e r t i f i c a t i on . de Seite 1 von 2
ZERTIFIKAT
ISO 9001:2008 DEKRA Certification GmbH bescheinigt hiermit, dass das Unternehmen
GHM Messtechnik GmbH
Zertifizierter Bereich:
Entwicklung, Fertigung und Vertrieb von mess-, steuer- und regeltechnischen Komponenten für industrielle Anwendungen
Zertifizierter Standort:
D-88453 Erolzheim, Schloßstraße 6
(weitere Standorte siehe Anhang)
ein Qualitätsmanagementsystem entsprechend der oben genannten Norm eingeführt hat und aufrechterhält. Der Nachweis wurde mit Auditbericht-Nr. A14041555 erbracht.
Dieses Zertifikat ist gültig vom 10.06.2015 bis 23.05.2018
Zertifikats Registrier-Nr.: 50713437/1
Lothar Weihofen DEKRA Certification GmbH, Stuttgart, 10.06.2015
Flexibility and Innovation
Competence in Measurement Technology
These two terms belong together and are the drivingforce behind the success of GHM Messtechnik.
We find solutions for the requirements of our customersin addition to the substantial standard program.
Just ask us ...
Test bench for IP protectionrating
State-of-the-artAltium 3D layout
Pressure test up to 1000 bar
Shielded EMC chambers for allnecessary testing
Our products meet all special standards:
• DIN EN ISO 9001 standard for quality management systems
• Safety Integrity Level (SIL2)• DIN EN 14597• Ex-Approval according to ATEX
• Classification of shipping GL (Germanischer Lloyd)
• EC-Certificate of conformity• etc.
3
Portfolio of the GHM Group
Conductivity
TemperatureHumidityPressure
pH / ORPSensors
Displays / Controller
Isolating convertersMeasurement transmitters
Switching relays
Data logger /EASYBus / deltaBus
FlowTemperature
Conductivity
Level
pH
Pressure
Flow
TemperaturePressureHumidity
Level
Filtration
Monitoring relays
Laboratory Measurement(Handheld Instruments)
Industrial Electronics /Control Technology
Test Bench Measurement
Customizing
Metrology
Industrial Measurement
Process Engineering
4
With the acquisition of Delta Ohm from the regionof Padua / Venice, the wide o ering of GHM hasbeen expanded with devices for environmentalmeasurement technology.This includes complete weather stations andindividual measuring devices for the detectionand evaluation of light, acoustics and vibration.Devices for the measurement of air quality, airspeed and multifunctional measuring devices –data loggers for WBGT, microclimate analysis andenvironmental and water analysis are now also offered.GHM can now serve and cover the requirementsa completely new group of customers.Delta Ohm was founded in 1978. With its sta of50 employees, it has developed an outstandinginternational reputation in the area of developmentand production of electronic measuringdevices.Delta Ohm currently exports to over 40 countriesand thereby o ers an international platform for theother ve companies of the GHM Group, whichalready enjoyed a nearly worldwide presencewith its own subsidiaries in the Czech Republic,Denmark and the Netherlands, as well as distributionpartners through Europe, in North and SouthAmerica, Asia and Africa.The Accredia Lat N°. 124 calibration laboratoriesof Delta Ohm are accredited for measurements ofthe following physical variables:
● Temperature● Humidity● Pressure● Air speed● Photometry / radiometry● Acoustics
New
5
Process measurement technology for hygienic areas
Process connections
Temperature (configurable via GTL programming tool)
Level measurement
Demands on the measuring technologyThe basis of hygienic process control and therefore the demands on the measuring technology is essenti-ally the fulfillment of the following criteria:• Hygienic Design for uncritical application• CIP- / SIP cleanable• Sensors made of stainless steel• FDA conform materials• EHEDG certification • 3A-approval• Protection class IP67 / IP69K
The process adaption demands choosing a hygienic process connection conforming to standards accor-ding to the desired application at tanks or in tubes. Diameter, volume and design define size and type of the connection, and medium, temperature and pressure state possible measuring principle. We offer hygienic easy-to-clean standard and special process connections for each measuring principle.
The temperature sensor series of the GHM group in-cludes more than 30 different basic design types. The versatile probes cover a huge range of applications in food, beverage and pharmaceutical industry.Advantages• Temperature range -40...+200 °C • Optional head transmitter• Fast response time due to reducing measuring tip• Several adapters and weld-in sleeves• Several evaluations electronics (ATEX, Profibus, SIL 2)• Pipe sensors for temperature monitoring of cleaning
and sterilization processes and for pasteurization and UHT
• Hydrostatic level measurement The level measurement is traced back to a measu-rement of the hydrostatic pressure. This pressure is caused by the liquid column above the sensor and is directly proportional to the filling level. • Potentiometric level measurement (single rod probe)The level of free-flowing media is measured by a single rod probe. Exploiting the electric induction the refe-rence pole has been moved into the probe, thus no electric connection at the tank is necessary any more.
Ask for our brochure „Instruments for food-, beverage- and pharma industries“.
6
Limit level measurement (configurable via GHMware)
Flow rate
Analysis measurement technology (configurable via GHMware)
• Capacitive DC measuring deviceThe DC measuring device provides measuring and monitoring of the dielectric constant (DC) of products. This allows monitoring of e.g. oil-water emulsion. A freely scalable current output is integrated for outputting the measuring value. The current status of the device and the measuring value can every time be read on the LC-display.
Applications:• Media separation / monitoring of emulsions• Continuous process control / product quality monitoring via DC
• Capacitive measuring principleSeveral years of experience with different kinds of level sensors and limit level switches finally resulted in a new measuring principle. Striking advantages of this patented charge transfer measuring principle are the response time, setting of switching points to the digit and the possibility of phase variation of media (e.g. milk and water).
• Calorimetric measuring principleThe limit level switch can detect liquids irrespective of conductivity or coloring. Additionally not too coarse granulate or mud-like products can be detected.
• Conductive measuring principleThis is a very cost-effective and flexible method for limit level detection. The sen-sor can be designed as single-rod as well as multi-rod probe. The sensor rods can subsequently be shortened or bent to fit them to the installation situation.
• Calorimetric flow rate measurementThe electronic flow rate monitoring based on the calorimetric principle has no mechanically moving parts (e.g. no turbine wheel or floating element). Therefore the sensor ca be used for media containing solids.Application: Monitoring and measuring of (even very low) flow rates, leakage control.
• Magnetic-inductive flow rate measurementThe magnetic-inductive principle uses the effect of conducting liquids inducing a voltage proportional to the flow velocity in a solenoid. Advantages of this measu-ring principle are that no moving parts are necessary and the pressure loss due to the measurement is low. Depending on the demands on design and tube standard the sensors are adapta-ble by several process connections.
7
II 2G Ex d IIC T6
Labeling according to directive 94/9/EG General labeling according to EN 60079-0
Explosion- proof equipment
Explosion- proof equipment
Device group
Category Type of ignition protection
Explosion group
Temperature class
Please ask for our brochure „ATEXexplosion protection - certainly safe“.
ATEX explosion protection
EU-Directive / CE mark
The explosion protection is regulated by directives and laws within the European Union. Electric devices have to fulfill corresponding regulations in the EU. If the requirements are fulfilled, the manufacturer can label the device with the CE mark. In this context any misuse is an offense.
According to directive 94/9/EG (ATEX directive) this marking is supplemented for the explosion protection of certain device classes – if needed – with the num-ber of the notified body that performed the acceptan-ce of the quality management.
In contrast to non-EU laws,the ATEX directive also applies to non-electric (e.g. pneumatic actuators). Corresponding systems and facilities are classified “requiring inspection” and only devices approved for that purpose are allowed to be used. Furthermore start-up, changing and routine safety inspections have to be certified by state-approved institutions or corporations. The legal framework are the EU direc-tives, which are bindingly enacted for all EU member countries.
Generally, there have to be three factors fulfilled, that a explosion can take place at atmospheric air:• combustible• oxygen (air)• ignition source
Explosions
Labeling
. . . p r o f e s s i o n e l l e M e s s t e c h n i k „ M A D E I N G E R M A N Y “2
M E E T T E C H N I E K
Vertriebstöchter
GHM Maaleteknik ApSMaarslet Byvej 28320 MaarsletDenmark +45 - 646492 - 00 +45 - 646492 - 01 www.ghm.dk [email protected]
GHM-Meettechniek BVZeeltweg 303755 KA EemnesNetherlands +31 - 35 - 53805 - 40 +31 - 35 - 53805 - 41 www.ghm-nl.com [email protected]
GHM-Greisinger s.r.o.Ovci hajek 2 / 2153158 00 Prague 5 Nove ButoviceCzech Republic +420 - 251 - 613828 +420 - 251 - 612607 www.greisinger.cz [email protected]
02/2
015GHM Messtechnik GmbH | Vertriebszentrale Erolzheim
Schloßstraße 688453 ErolzheimGermany
+49 - 7354 - 937233 - 0 www.ghm-messtechnik.de [email protected]
GHM-Kompetenzzentren(Entwicklung & Produktion)
GHM Messtechnik GmbH Standort Martens Kiebitzhörn 1822885 BarsbüttelGermany +49 - 40 - 67073 - 0 +49 - 40 - 67073 - 288 www.martens-elektronik.de [email protected]
GHM Messtechnik GmbH Standort HonsbergTenter Weg 2-842897 RemscheidGermany +49 - 2191 - 9672 - 0 +49 - 2191 - 9672 - 40 www.honsberg.com [email protected]
GHM Messtechnik GmbH Standort GreisingerHans-Sachs-Straße 2693128 RegenstaufGermany +49 - 9402 - 9383 - 0 +49 - 9402 - 9383 - 33 www.greisinger.de [email protected]
GHM Messtechnik GmbH Standort ImtronCarl-Benz-Straße 1188696 OwingenGermany +49 - 7551 - 9290 - 0 +49 - 7551 - 9290 - 90 www.imtrongmbh.de [email protected]
GHM Messtechnik GmbH Standort T&AMiramstraße 8734123 KasselGermany +49 - 561 - 948710 - 50 +49 - 561 - 948710 - 51 www.tua-online.com [email protected]
Messtechnik für Anwendungen im Ex-Bereich
Made in Germanywww.ghm-messtechnik.de
Unternehmen / Marken der GHM
8
B Industrial sensor and measuring technology
B2. Flow rateA-V1A-V2A-V3A-H1.1A-H1.2A-H2.1A-U1-1
B1. TemperatureGTF 101-ExGTF 102-ExGTF 103-ExTC293TR293TC296
B3. Level measurementA-U1-2IL10
B6. PressureIS20IS21
B7. Weighting technologyPC22SB8RC3DMS50Ex
E Industrial electronics
E2. TransmittersPMT50Ex-1
E3. Isolation amplifiersTV500Ex, ST500ExTV501ExTS500-Ex
E4. Safety and monitoring devices
MR50ExSTL50Ex
D Laboratory and hand-held measuring devices
GMSD-exMSD-exGMH 3111-exGMH 3151-exGMH 3156-exGMH 3161 - ... - exGMH 3181 - ... - ex
E1. DisplaysGIA 0420 N-exGIA 010 N-exGIA 0420..-exGIA 0420 WK..-exGIA 010 VO..-exGIA 010 WK..-ex
Brief overview: products with Ex
9
The first products of GREISINGER electronic GmbH 30 years ago were premium special sensors, which hit the nerve of the market and founded the success of the company.
Since then the location Greisinger has developed and manufactured its handheld instruments, transmitters, displays and corresponding sensors in Regenstauf, Bavaria (near Regensburg).
The use of state-of-the-art machinery and instrumentation, and the highly efficient and productive manufacturing process are the the base of the high product quality "Made in Germany" at competitive prices.
10
silverline
i.e.: SL-pH
Quality for ProfessionalsLine Switch on and instantly Measure!
In the broad range of GREISINGER hand-held instruments you will find the right device for every measurement task.GREISINGER handheld instruments se-ries Line 3000 are bus-capable, one- or multi-channel devices, have an interfa-ce and are optionally available as data logger. Handheld instruments series COMPACT Line can be used wherever fast and precise measured values at economical prices play an important role.
Line 3000Line COMPACT
• Temperature• Conductivity• pH / ORP• Pressure• Humidity• Material moisture• Flow• Oxygen• Carbon monoxide
Handheld Instruments
Waterproof – for highest Demands
With modern design, Greisinger pre-sents the newest handheld instruments with robust and waterproof housing and plug connections / probes. According to model the handheld instruments have cyclic value memory with up to 10000 data set, manual or automatic logger function, an analog output and the large illuminated display.
Line 5000Line 2000
• pH / ORP• Temperature• Pressure• Conductivity
• pH / ORP (SL-pH)• Temperature
(SL-Pt eco)• Pressure (SL-P)• Conductivity (SL-C)
Measuring Sets
Each GHMsilverline set includes a complete measuring set • Water-proof handheld instrument• High-quality case• Flash drive with software and manual • USB adapter and cable with connection
for analog output• ratis manufacturer‘s calibration after
1 year with automatic reminding from our calibration laboratory
• Accessories like e.g. water-proof pH electrode and buffer solutions or wa-ter-proof temperature probe (depen-ding on set type)
11
Data Logger / EASYBus
Displays / Controller
- Dimensions 48 x 96 mm
24 x 48 mm
- Universal Inputs • Standard signal • Resistance • Frequency • Speed • Counter • Difference
- Relay switching outputs
- Self diagnosis
- Programmable characteristic
- Transmitter power supply, isolated
- Serial Interface
- Min/Max value memory
• Temperature• Humidity• Standard signal• Air pressure• Pulse• Status
12
Advantages of EASYBus
• Minimum amount of installation and planning• Display and monitoring system for several
measurement points• Unrivaled cost/performance ratio • High flexibility: Subsequent modifications and
extensions possible at any time
Applications of EASYBus
• Cooling chambers (temperature monitoring)• Heating / air conditioning / ventilation
(temperature, relative humidity, CO2-monitoring)• Utility rooms / computer rooms / laboratories
(temperature, relative humidity)• Manufacturing rooms (temperature, relative humi-
dity, CO2)
Probes / Signal Converters
• Injection probe• Immersion probe• Surface probe• Air / gas probe• Asphalt probe• Clip-on probe
• Temperature• Humidity• Pressure• Conductivity• ORP• pH• O2
• CO• CO2
• Flow
13
For many years Honsberg has held a significant position in control and measurement technology for flow, level, temperature, pressure, and filtration instrumentation. Our activities cover research and development, manufacturing, sales, and service.
- Honsberg was founded in 1963 as family-owned enterprise.
- Honsberg is a medium-sized company with its production facility in Remscheid.
- Honsberg products are installed in waste water treatment, diesel engines, compressors, con-struction machines, as well as in machine tools, paper, printing or refrigerating machines.
14
Level
Temperature
Pressure
Filtration
Bi-metal monitor for temperature control in strong design. External adjustable temperature switch. Platinum temperature meter with high accuracy. Can be combined with transmit-ters FLEX-T (switch, analog, or frequency output) or OMNI-T (switch, analog, or frequency output and LED display).
Differential temperature meter consisting of two platinum pro-bes and 4..20 mA signal output. Infrared sensor for contactless measuring and monitoring of temperatures (OMNI-IR).
Membrane pressure monitor with settable switching point in stainless steel or brass housing. Pressure meter with thick-film sensor and protected pressure cell, current output 4..20 mA. Stainless steel meter with flush mount membrane in 2-wire technology for combination with transmitters FLEX-P (switch, analog, or frequency output) or OMNI-P (switch, analog, or frequency output with LED display).
Ceramic pressure cell in stainless steel housing in 2-wire technology, to be combined with transmitters FLEX-P (switch, analog, or frequency output) or OMNI-P (switch, analog, or frequency output with LED display).
All pressure sensors are available also with wireless transmit-ter.
Inspection glasses for vertical mounting in various lengths to monitor fluid levels and visual appearance.
Float gauges for vertical mounting in various lengths and de-signs monitoring fill levels with one or more switch-points.
Float gauges for horizontal mounting monitoring fill levels with one contact or with capacitive measures. Ultrasonic method for granules and ductile materials avoiding direct contact.
Magnetic filter with microstrainer and magnet plug in solid construction, micro mesh 5..300 µm with clear-sight lid.
15
Indication• Displays to be combined with many devices• Mechanical scales (do not need power supply)• Electronic displays with back lighting
Switching• Reed switch• Micro switch• Hall-effect switch
• Piston valve design• Piston in line design• Float
• Paddle• Dynamic flap
• Gear wheel• Bolt
Flow
16
Measuring• With transmitter• Programmable switch-points• Analog output: current, voltage, and/or frequency
Add-on systems with switches, transmitters, mechanical scales and electronic displays.
• Vortex• Sight glass
• Calorimetric• Magnetic-Inductive
• Flap• Sphere
• Flow limiter
17
Martens Elektronik GmbH, founded in 1988, has more than 20 years experience in the field of mea-suring, control, and process measurement. Our motto is “Made in Germany” with development and production in Barsbüttel near Hamburg.
The product portfolio consists of digital displays, signal converters, sensors, and analysis devices. Nearly every physical or electrical quantity can be measured.
We build customer-specific devices for special requirements beyond the standard.
The vast range of products and measured quan-tities is reflected by our customer base, spanning from building automation via plant engineering to the pharmaceutical industry.
18
Process and Analysis Measurement
• Interpretation of standard flow sensors
Conductivity
Measurement with conductive 2- and 4-pole sensors is commonly used. The variety of plugs allows measuring un-der nearly all conditions from water to aggressive acids.
• Conductive• Measurement of
all ranges down to ultrapure water
pH / ORP
Measuring one of the most important process quantities is a piece of cake with our converters and displays. Tasks like connecting, configuring, as well as calibration are intuitional matters.
• Measurement with standard electrodes
LevelWe offer technologies for level mete-ring depending on applications and specifications, from sensors for hy-drostatic pressure to capacitive sen-sors for viscous or adhesive media..
Flow
All commercial flow sensors can be connected to our field meters and signal converters for flow and fre-quency measurement. Values are displayed visually or converted into a standard signal.
• Capacitive level measurement
• Hydrostatic level measurement
19
Industrial Electronics
Industrial Electronics
Displays and Fieldmeters
Transmitters
Visualization is the most important factor monitoring and displaying processes and application flows for the user.
Our range of displays for front panel or direct mounting offers solutions for nearly all measurement quantities and physical units.
A common feature of the displays is easy configuration via front panel buttons or DIP switches plus manifold options with relay and analog outputs.
Use under harsh conditions is feasible due to environmen-tal class IP65. If you have not found the appropriate display for your application yet, please do not hesitate to ask for a customer-specific solution.
• Rotation• Pressure• Flow• Cycle time• Conductivity• Counter• pH value• Productivity• Temperature• Level• Standard signals
Signals from Pt100, thermocouples, strain gauges, or re-sistors cannot always be processed directly. Otherwise the signal follows a function needing processing as a linearized standard signal.
For these and other signals and applications we offer transmitters with DIN-Rail mounting. Housings are 22.5 or 50 mm wide depending on the application. Configuration can be done with DIP switches, Teach-In, or via keypad and display.
In most cases the transmitter can be enhanced with alarm contacts for a safe shutdown in case of emergency.
• Signal conditioning• Linearization• Characteristics
transformation• Voltage• Current• Temperature• Resistance• Frequency• Power
20
SIL 2
Industrial Electronics
Industrial Electronics
Isolating Converters
Switching and Monitoring Devices
• Galvanic isolation• Power feed
isolation• Switching repea-
ter isolation• Transmitter
isolation
• Threshold switch• Isolation guard• Power monitoring• Emergency relay• Safety tempera-
ture limiter
Independent of the size of an installation, many failures and problems relate back to noisy signals or electrical po-tential mismatch.
The solution is the galvanic isolation of the signal. Our iso-lating converters are available as active or passive version with 1, 2, or 3 channels for DIN-Rail mounting.
With a universal design nearly all devices only isolate sig-nals, but also convert signals e.g. from 4..20 mA to 0..10 V.
Our switching and monitoring devices ensure the safe ope-ration of an installation. Starting with a simple threshold switch, the product range also covers isolation guards and safety temperature limiters with SIL2 class according to actual DIN EN 14597 standard.
Monitoring is also essential for the Ex area. Many of our devices allow connection of signals from this zone.
The devices are freely configurable or programmable with a free choice of functionality.
21
IMTRON Messtechnik GmbH was founded April 1984 as an engineering office by Werner Hein-rich. Since then it became a recognized supplier of measurement components and systems for industrial applications in development, manufac-turing, and testing.
Our products are widely used by companies like ABB, Astrium, Daimler, ESA, Schaeffler Group, Tog-num, VW Group, ZF, and many more. Applications are in the processing and acquisition of physical parameters like pressure, temperature, distance, angle, current, voltage, torque, etc.
Hardware and software is used in stationary au-tomotive and machine manufacturing test beds, for energy monitoring in wind and solar parks, as well as mobile for car, truck and aircraft testing.
22
Signal Conditioning and Data Acquisition Systems
DASIM
The most universal system for indust-rial data acquisition.
With 1 DSP per channel, the ampli-fiers of the proven DASIM measure-ment system offer an outstanding performance with minimum space requirements.
The 2-channel Universal amplifier is designed for a vast number of sensors.
Each of the 2 amplifier channels can be set independently and without compromise to any foreseen sensor by our parameter setting software DaSoft.
Sensor parameters can be also direct-ly imported out of a sensor data base.
Each measurement channel is isolated and provides adequate power supply for the different types of sensors.
The sample rate per channel is 20 or 40 kS/s. All channels are synchronous.
There are 2 precise analog output sig-nals available per channel. In parallel the digitised signals from the internal high-speed bus are output via an Ethernet and CAN interface.
Measurement data are buffered in a FIFO. Parameter setting is done via the Ethernet or an RS232 interface.
• Extremely Universal• Isolated Inputs• 1 DSP per Channel• 2 Channels per Amplifier• 40 kHz Sample Rate• Ethernet, CAN• Analog Outputs• GPS, Video Connection• Parameter setting
software DaSoft• Acquisition software
DAQSoft• Drivers for DASYLab,
LabVIEW, DIAdem
23
Particularly Cost-Effective
High-end universal and modular computer cont-rolled data acquisition system.
4-channel universal SIQUAD amplifier for a huge number of sensors. 24 bit AD conversion and up to 20 kS/s sample rate.
The modular amplifiers are designed for strain gauge, DC signals, temperature, ICP©, and fre-quency sensors. Units for analog out and Digi-tal-IO are also available.
Isolated inputs, analog and digital signal output. Ethernet and CAN interface.
All channels are synchronous.
Isolated and with Filters
DIN-Rail modules for isolated noiseless signal conversion, conditioning and combining.
Inputs for norm signals as well as strain gauge bridges, DC signals, potentiometers, temperature, ICP© sensors, pulse generators. Outputs as norm signals for current and voltage.
Plug-in filter modules 4th (8th) order for interferen-ce suppression.
SIQUAD
TSA-Modules
24
Universal, Stand-alone and Compact Size
Individual universal and modular amplifiers with 1, 2, 4, 6, and 16 channels for stand-alone data acquisition. Isolated inputs. Digital signal output via CAN.Various types of chassis.
Decentral and Stand-alone
Individual modular amplifiers in a miniature system for decentralised data acquisition. Digital signal output via Ethernet and CAN interface.Various types of chassis.
Calibration devices for strain gauge amplifiers with manual or IEEE488 operation.
Bridge resistances 120, 350, and 1000 Ohms. Sen-sitivities from 0.1 to 50 resp. 250 mV/V in 10 resp. 20 steps. Accuracy ± 0.02 %.
Test standard for physically correct simulation of strain gauge bridges, potentiometers, thermo-couples, RTDs, current, voltage, and tachometer generators.
The microprocessor used allows direct entry of sensor values as physical quantities. Calibration and nominal values are accounted for as well.
Calibration and Testing
25
NORTH
SOUTH
WEST
Sales Germany
Hans-Joachim PetermannKrögerstraße 3022145 HamburgPhone +49 40 67998410Fax +49 40 67998411Mobile +49 172 [email protected]
Sales area 1 + 2
Michael WulfKiebitzhörn 1822885 BarsbüttelPhone +49 40 67073-201Fax +49 40 67073-238Mobile +49 172 [email protected]
26000 – 2699927730 – 2777727794 – 27999
Sales area 10
29000 – 999930000 – 34999 37000 – 39999
Jörg WinterVor dem Lohholze 1729690 SchwarmstedtMobile +49 172 [email protected]
Sales area 5
Peter TaubertStralsunder Straße 14904349 LeipzigPhone +49 34298 159606Fax +49 34298 159605Mobile +49 171 [email protected]
Sales area 6
Elfi LucasPhone +49 7354 937233-58Fax +49 7354 [email protected]
Customer support
70000 – 7999988000 – 89999
Sales area 980000 – 87999 90000 – 97999
Joachim Höfl ingKleinhaslach 8090599 DietenhofenPhone +49 9824 928682Fax +49 9824 928681Mobile +49 172 8460512j.hoefl [email protected]
Sales area 8
40000 – 4199945000 – 5099952000 – 52999
Jürgen KerstenKamperlingsweg 947906 KempenPhone +49 2152 80907-95Fax +49 2152 80907-97Mobile +49 172 [email protected]
Sales area 3
35000 – 3699942000 – 42999 44000 – 4499951000 – 51999 53000 – 53999
57000 – 59999 61000 – 61999
Stefan MüllerOttostraße 5142289 WuppertalPhone +49 202 6093374Mobile +49 171 [email protected]
Sales area 4
Thomas StumpeSales Director Germany / Austria
Phone +49 7354 937233-0Fax +49 7354 937233-88Mobile +49 172 4346882
Schloßstraße 688453 ErolzheimGERMANY
54000 – 5699960000 – 6099963000 – 69999
Christian RösnerJoseph-Berberich-Str. 863538 GroßkrotzenburgPhone +49 7354 937233-0Fax +49 7354 937233-88 Mobile +49 151 [email protected]
Sales area 7
NORTH NORTH
NORTH
NORTH
SOUTHSOUTH
WEST
WEST
WEST
17000 – 19999 20000 – 20449 20450 – 2045820459 – 21040 21041– 21450
21451 – 21480 21481 – 2150821509 – 2151321514 – 2199922000 – 22999
23000 – 2399924000 – 2599927000 – 2772927778 – 2779328000 – 28999
00000 – 09999 10000 – 16999 98000 – 99999
26
Via G. Marconi 535030 Caselle di Selvazzano ITALY
Phone +39 049 8977150Fax +39 049 63 5596Mobile +39 340 [email protected]
Breitenseer Str. 76/1/36A-1140 Wien AUSTRIA
Phone +43 660 [email protected]
Andrea CasatiOffi ce Italy / Delta OHM S.r.l.
Alfred FröstlOffi ce Austria
Our International Area Sales Management Team
GHM Foreign Sales
Netherlands Czech Republic / Slovakia
Denmark South Africa Italy
GHM-Meettechniek BVZeeltweg 303755 KA EemnesNETHERLANDS
Phone +31 35 53805- 40Fax +31 35 53805- [email protected]
GHM-Greisinger s.r.o.Ovci hajek 2 / 2153158 00 Prague 5 Nove ButoviceCZECH REPUPLIC
Phone +420 251 613-828Fax +420 251 [email protected]
GHM Maaleteknik ApSMaarslet Byvej 28320 MaarsletDENMARK
Phone +45 6464 92-00Fax +45 6464 [email protected]
GHM Messtechnik SA (PTY) Ltd16 Olivier StreetVerwoerdpark, Alberton 1453SOUTH AFRICA
Phone +27 74 [email protected] www.ghm-sa.co.za
Delta OHM S.r.l.Via Marconi 535030 Caselle di SelvazzanoPadova (PD)ITALY
Phone +39 049 8977150Fax +39 049 635596 [email protected]
Occo AndriessenDirector
Michal DoubekDirector
Erling MathiesenDirector
Jan GroblerManaging Director
Carlo MeiSales Manager
GHM Sales Subsidiaries
Anita RencDirection sales international
Parimal SharmaSales Export
Feifan JinSales Export
Mina KamalSales Export
Peter WüsterSales Export
GHM GROUP – HeadquatersSchloßstraße 688453 ErolzheimGERMANY
GHM GROUP – HeadquatersSchloßstraße 688453 ErolzheimGERMANY
GHM GROUP – HeadquatersSchloßstraße 688453 ErolzheimGERMANY
GHM GROUP – HeadquatersSchloßstraße 688453 ErolzheimGERMANY
GHM GROUP – HonsbergTenter Weg 2-842897 RemscheidGERMANY
Phone +49 7354 937233- 401Mobile +49 173 [email protected]
Phone +49 7354 937233- 403 [email protected]
Phone +49 7354 937233- 405 [email protected]
Phone +49 7354 937233- [email protected]
Phone +49 2191 96 [email protected]
Area: South-East Asia, France, Swizzerland, Spain, PortugalZ
Area: Russia, India, Estonia, Lithuania, Latvia, Romania, Hungary, Bulgaria
Area: China, Japan, South Korea, South-East Asia
Area: Africa, Arabic States, Israel, Greece
Area: Scandinavia, UK, Ireland
Language: German, English, Italian, Czech
Language: English, Hindi, German
Language: Chinese, German, English
Language: English
Language: German, English
27
Sales Europe
TEMPCO SA4ém Avenue, 114Parc Industriel des Hauts-Sarts4040 HerstalBelgiumE-Mail: [email protected]: www.tempco.be
BulgariaHennlich OOD147A, Brezovsko shose Str., Rota center, floor 3BG-4003 PlovdivBulgariaE-Mail: [email protected]: www.hennlich.bg
DenmarkGHM Maaleteknik ApSMaarslet Byvej 28320 MaarsletDenmarkE-Mail: [email protected]: www.ghm.dk
EstoniaMativesi OÜPae 480042 PärnuEstoniaE-Mail: [email protected]: www.mativesi.ee
FinlandKübler Suomi OyControl EngineeringKelatie 25 A 1-301450 VantaaFinlandE-Mail: [email protected]: www.kubler.fi
OEM Finland OYFiskarsinkatu 320750 TurkuFinlandE-Mail: [email protected]: www.oem.fi
FranceEuro Air Instruments7 Barbenègre33580 Sainte GemmeFranceE-Mail: [email protected]: www.euro-air-instruments.fr
ERICHSEN SARL4, passage Saint-AntoineF-92508 Rueil-MalmaisonFranceE-Mail: [email protected]: www.erichsen.fr
M Å L E T E K N I K
GreekUTECO ABEE5, Mavrogenous Str.18542 PiraeusGreeceE-Mail: [email protected]: www.uteco.gr
DEKA S.A.Aristidou 21185 31 PireasGreeceE-Mail: [email protected]: www.deka.gr
ROUSAS & SIA OE - TOTAL STATION OEAgiou Hristoforou & ElaiononPikermi 19009AthensGreeceE-Mail: [email protected]
Great BritainOEM AUTOMATIC Ltd.WhiteacresCambridge RoadWhetstoneLeicestershire LE8 6ZGGreat BritainE-Mail: [email protected]: www.oem.co.uk
PVLPressure Vacuum Level Ltd.Unit 9, Lexden Lodge Ind. EstateJarvis Brook, CrowboroughEast Sussex, TN6 2NQGreat BritainE-Mail: [email protected]: www.pvl.co.uk
IrelandDiestro Services LTDInniscarra Co. Cork,IrelandMr. Sean ThompsonEmail: [email protected]: www.diestro-services.ie
Flowcon technology LtdLisboy houseBlackrock RoadCorkMr. Anthony O‘KeeffeE-Mail: [email protected]: www.flowcon.ie
ItalyVAL.CO s.r.l.Via Rovereto, 9/1120014 S.Ilario di Nerviano (MI)ItalyE-Mail: [email protected]: www.valco.it
Danetech srlVia Magenta 77/620017 RHO (Milano)ItalyE-Mail: [email protected]: www.danetech.it
I
CroatiaHENNLICH Industrijska tehnika d.o.o.Franje Wölfla 410000 ZagrebCroatiaE-Mail: [email protected]: www.hennlich.hr
Latvia LithuaniaOEM Finland OYFiskarsinkatu 320750 TurkuFinlandE-Mail: [email protected] Web: www.oem.fi
Labochema LTVilkpedes st. 22Vilnius, LT-03151Lietuva/LithuaniaE-Mail: [email protected]: www.labochema.lt
LuxembourgTEMPCO SA4ém Avenue, 114Parc Industriel des Hauts-Sarts4040 HerstalBelgiumE-Mail: tempco (at) tempco.beWeb: www.tempco.be
MoldovaS.C. TXP Advisers srlSos Pantelimon Nr 10-12 Etaj 1Cod 021591 Sector 2 BucurestiRomaniaE-Mail: [email protected]: www.txp.md
NetherlandGHM-Meettechniek BVZeeltweg 303755 KA EemnesNetherlandsE-Mail: [email protected]: www.ghm-nl.com
NorwayOEM Automatic ASBjornstjerne Bjornsonsgate 1103044 DrammenNorwayE-Mail: [email protected]: www.oem.no
M E E T T E C H N I E K
AustriaMEDONIng. Christian HalperGreiner 3767534 OlbendorfAustriaE-Mail: [email protected]: www.medon.at
Hennlich GmbH & Co. KGAlfred-Kubin-Straße 9 a-c4780 SchärdingAustriaE-Mail: [email protected]: www.hennlich.at
PMR HandelsgmbHSt. Peter Hauptstrasse 508042 GrazAustriaE-Mail: [email protected]: www.pmr.at
PolandZACH METALCHEM Sp. z o.o.ul.Chorzowska 44c44-101 GliwicePolandE-Mail: [email protected]: www.metalchem.pl
PortugalBHB Sistemasde Controlo e Medida LdaLargo Joao Vaz, n°. 111700-249 LisboaPortugalE-Mail: [email protected]: www.bhb.pt
RomaniaS.C. TXP Advisers srlSos Pantelimon Nr 10-12 Etaj 1Cod 021591 Sector 2 BucurestiRomaniaE-Mail: [email protected]: www.txp.ro
RussiaEuropribor Ltd Group109518, Moscow1-y Grayvoronovsky pr. 20, str.36E-Mail: [email protected]: www.europribor.ru
MegaSensor GmbHPavel BazanovIm Weidenbruch 22751061 KölnGermanyE-Mail: [email protected]: www.megasensor.com
Belgium
28
SwedenOEM Automatic ABDalagatan 457328 TranasSchwedenMr. Henrik SjölinE-Mail: [email protected]: www.oemautomatic.se
Svenska Termoinstrument ABAdress. Box 1421SE-183 14, TäbySweden E-Mail: [email protected]: www.svenskatermoinstrument.se
SwitzerlandFahrer AGAlte Winterthurerstrasse 38309 NürensdorfSchweizE-Mail: [email protected]: www.fahrer.ch
Rolf Muri AGMess-und RegeltechnikCH-8812 HorgenSwitzerland E-Mail: [email protected]: www.rolfmuri.ch
EHS Elektrotechnik AGIndustriestrasse 26CH-8604 VolketswilSwitzerlandE-Mail: [email protected]: www.ehs.ch
SerbiaHennlich DOO Beogradul. Svetozara Markovica 3/411400 MladenovacSerbiaE-Mail: [email protected]: www.hennlich.co.yu
Inczédy & Inczédy Kft.Katona Lajos utca 1/b2600 Vác, Pf. 49HungariaE-Mail: [email protected]: www.inczedy.com
SloveniaHENNLICH d.o.o.Podnart 334244 PodnartSloveniaE-Mail: [email protected]: www.hennlich.si
SlovakiaGHM-Greisinger s.r.o.Ovci hajek 2 / 2153CZ158 00 PRAGUE 5 - Nove ButoviceCzech RepublicE-Mail: [email protected]: www.greisinger.cz
HENNLICH Industrietechnik, s r. o.Kosicka 5282108 BratislavaSlovakiaE-Mail: [email protected]: www.hennlich.sk
SpainFAUST Y KAMMANN, S.L.Provenza, 382-38608025 BarcelonaSpainE-Mail: [email protected]: www.faustykammann.com
SENSOTEC INSTRUMENTS, SA C.Albert Einstein, 54, nave 16 08940 - Cornellà de Llobregat Barcelona - Spain E-Mail: [email protected] Web: www.sensotec-instruments.com
Aquaculture Partners Polígono Industrial Joeria SudCarrer dels Esclopeters, 2C17150 Sant GregoriSpain E-Mail: [email protected] Web: www.aquaculture-partners.com
Czech RepublicGHM-Greisinger s.r.o.Ovci hajek 2 / 2153CZ158 00 PRAGUE 5 - Nove ButoviceCzech RepublicE-Mail: [email protected]: www.greisinger.cz
HENNLICH , s r. o.Ceskolipska 941201 LitomericeCzech RepublicE-Mail: [email protected]: www.hennlich.cz
TurkeySMS-TORK SANAYI MALZEMELERI ÜRETIM VE SATISI A.Ş.Bostanci Yolu Kuru Sokak, 1634776 - Y. Dudullu/UmraniyeIstanbulTurkeyE-Mail: [email protected]: www.sms-tork.com.tr
Imtek Muhendislik San.Tic.Ltd.Sti Kurtulus mah. 64012 Sk. Camkiran Apt.No: 17 Kat:1 No:1Seyhan / AdanaTurkeyE-Mail: [email protected]: www.im-tek.com.tr
HungaryInczédy & InczédyKatona Lajos utca 1/b2600 Vác, Pf. 49HungariaE-Mail: [email protected]: www.inczedy.eu
HENNLICH IPARTECHNIKA KFTHelioport – Reptér6000 Kecskemét-KadafalvaHungaryE-Mail: [email protected]: www.hennlich.com
OEM Automatic Kft.H-2040 BudaörsGyár u.2.Post adress:H-2058 BudaörsP.O. BOX: 111E-Mail: [email protected]: www.oemautomatic.hu
UkraineMegaSensor GmbHPavel BazanovIm Weidenbruch 22751061 KölnGermanyE-Mail: [email protected]: www.megasensor.com
AKV Industrie Automatik OHGErich-Mueller-Str. 2440597 DüsseldorfGermanyE-Mail: [email protected] Web: www.akv-ia.de
BelarusMegaSensor GmbHPavel BazanovIm Weidenbruch 22751061 KölnGermanyE-Mail: [email protected]: www.megasensor.com
29
Sales Worldwide
EgyptEgyptian Engineering Systems12 Ibn Sander square, Hamamat el KobaCairoEgyptE-Mail: [email protected]: www.ees9.com
AustraliaPipeline Dynamics Pty Ltd.18 Thomas StreetAirort West, Vic 3042AustraliaE-Mail: [email protected]: www.pipelinedynamics.com.au
Practical Control Solutions Pty LtdPO Box 1052 Mount Waverley Delivery CentreMount Waverley, Victoria, 3149AustraliaE-Mail: [email protected] Web: www.practicalcontrol.com.au
BrazilIZDA Equipamentos para AutomatizacaoIndustrial Ltda.Rua Dr. Humberto Pinheiro Vieira, 14189.219-570 – City Joinville SCBrasiliaE-Mail: [email protected]: www.izda.com.br
ChinaShanghai Ouzhen Mechanical Electrical LtdNr. 135 Longcao Road 200235 ShanghaiEmail: [email protected]: www.sh-ouzhen.com
SHENZHEN Star View Industrial Co., LtdFlat F, 7/F, BLK 1, GreenfieldsRM 609 Aihua Bld 2038 Shennan Middle Rd. Shenzhen, P.R.China E-Mail: [email protected]: www.martens.com.cn
Shanghai PMA Co. Ltd. Room 1320, Xinzhuang Business BuildingNo. 4999 Zhongchun Road, Minhang DistrictShanghai 201199P.R. ChinaE-Mail: [email protected]: www.greisinger.cn
Guangzhou Zeer Electro-Mechanical Science and Technology Co.LtdRoom 1308, BaiNaoHui Science&technology, Building B,TianHe Road 594, Guangzhou, P.C.: 510635P.R. ChinaE-Mail: [email protected]: www.zeer.com.cn
Silkroad24Office in ShanghaiBuilding No. 1034-1035Wangqiao Road No.999Pudong New District201201 ShanghaiP.R. ChinaE-Mail: [email protected]: www.silkroad24.com
I
IndiaTrinity Interface Systems Pvt. Ltd.Arenja Plaza, Plot No. 52Sector 15, CBD BelapurNavi Mumbai - 400614IndiaE-Mail: [email protected]: www.trinityautomation.co.in
PMA Controls India Limited - GreisingerPlot No. 134 A , Burma ColonyOff OMR Perungudi600096 Chennai, TamilnaduIndiaPhone:+91 44 2496 0315 / 469Fax : +91 44 2496 0463E-Mail: [email protected] : http://www.pmacontrols.in
IndonesiaPT. Mahardhika Rya InstrumindoJl. Bandengan SelatanKomplek Puri Deltamas # Blok I / No. 53AJakartaIndonesiaE-Mail: [email protected]
IranNikdad Instrument and Control System Ltd.Unit 202 , No.7, West 19th St.Second Sadeghieh Sq.Tehran 14517 93536IranE-Mail: [email protected]: www.nikdad.com
IsraelUILUnited Instruments Ltd,27, Hamaa‘pilim Blvd.P.O.Box 36773Tel-Aviv 61367IsraelE-Mail: [email protected]: www.united.co.il
R.B.M. Ltd. CONTROL & MECHANIZATION21st., Atir-Yeda St., Kfar-Saba, 4464316 IsraelE-Mail: [email protected]: www.rbmltd.co.il
JapanHITECH LIMITEDShimouma 1-35-2, Setagaya154-0002 TokyoJapanE-Mail: [email protected]: +81 3-5430-2301Fax: +81 3-5430-2302
MalaysiaEC Instruments &Engineering Sdn Bhd 79A, Jalan Cantik 2,Taman Pelangi Indah,81800 Ulu Tiram, Johor,MalaysiaFon 07-8635370Fax 07-8635369Mobile 011-1068-8201 (Terry Chiah)E-Mail: [email protected]: [email protected]: www.myecie.comSkype: terrychiah
MorrocoMesstechnik MarocBir rami ouest 25214 000 KénitraMarokkoE Mail: [email protected]: www.messtechnik.ma
OmanMenco Global FZCPO Box: 9375SAIF ZoneSharjahUnited Arab Emirates (UAE)E-Mail: [email protected]: www.mencoglobal.com
PhilippinesDMSFLO IncorporatedUnit 412 A & B 4th Floor, BJS Building1869 P. Domingo StreetMakati CityPhilippinesE-Mail: [email protected]: www.dmsflo.com
SingaporeFour Star EnterprisesPatrick Lim37, Kallang Pudding Road No. 09-01Blk B Tong Lee BuildingSingapore 349315SingaporeE-Mail: [email protected]: www.fse.com.sg
South AfricaGHM Messtechnik SA (Pty) Ltd16 Olivier StreetVerwoerdpark, Alberton 1453Fon: +27 - 74 459 0040E-Mail: [email protected]
OMSA VALVES AND INSTRUMENTATION PROPRIETARY Ltd.P.O. Box 1298Randburg 2125South AfricaE-Mail: [email protected]: www.omsa.co.za
AMS HADENBuilding 5Bergzicht Office ParkC/O Christiaan De Wet & Rooibok AveAllen‘s Nek, 1737South AfricaE-Mail: [email protected]: www.amshaden.co.za
Evanet (Pty) LtdP.O. Box 1505Rivonia 2128South AfricaE-Mail: [email protected]: www.evanet.co.za
South KoreaSane Calibration Instruments Co., Ltd.Rm 911 Hyundai Tower, 293-19,Olympic-ro, Songpa-guSeoul 138-735KoreaE-Mail: [email protected]: www.sanecal.com
ZEECOM INC.Joyoon Bldg. 2F,112, Pajangcheon-ro, 30beon-gil,Gyeonggi-do (440-802)South KoreaE-Mail: [email protected]: www.zeecomkorea.com
TaiwanYuden-Tech Co., Ltd.5F., NO.121, Lide St., Jhonghe Dist.New Taipei City 23556Taiwan (R.O.C.)E-Mail: [email protected]: www.yuden.com.tw
ThailandCompomax Company Ltd.16 Soi Ekamai 4Sukhumvit 63 Rd.Prakanongnue, VadhanaBangkok 10110ThailandE-Mail: [email protected]: www.compomax.co.th
PRC Technologies Corporation Ltd.328/65 Ladprao 87 RdWangthonglangBangkok 10310ThailandE-Mail: [email protected]: www.flowmeterflowsensor.com
TunesiaOrange-TechRue El Wizara,Imm. El Hana Mezzanine B33000 SfaxTunisiaE-Mail: [email protected]: www.orangetech.com.tn
United States of AmericaERDCO Engineering Corporation721 Custer AvenueEvanston, IL 60202 USAE-Mail: [email protected]: www.erdco.com
United Arab EmiratesMenco Global FZCPO Box: 9375SAIF ZoneSharjahUnited Arab Emirates (UAE)E-Mail: [email protected]: www.mencoglobal.com
VietnamANS Vietnam(Anh Nghi Son Service Trading Co., Ltd.)D3, Dinh Tien Hoang Street,Mieu Noi Ressident Area,W.3, Binh Thanh Dist.,HCMCVietnamE-Mail: [email protected]: www.ansvietnam.com
Information media of GHM Messtechnik
Measuring technology for application in ATEX Brochure for applications in explosive areas
Measurement data acquisition systemsBrochure for applications ranging from test stands to climate control monitoring
Industrial ElectronicProductcatalog
Industrial ElectronicBrochure for use in theIndustrial Electronics
GHM-ONE
Industrial OilsMechanical Engineering
Food, beverage and pharmaceutical industriesProductcatalog
Delta OHM Image brochure
Measurment technology for use in theFood, beverage and pharmceutical industries
30
Information media of GHM Messtechnik
Measuring technology for application in ATEX Brochure for applications in explosive areas
Measurement data acquisition systemsBrochure for applications ranging from test stands to climate control monitoring
Industrial ElectronicProductcatalog
Industrial ElectronicBrochure for use in theIndustrial Electronics
GHM-ONE
Industrial OilsMechanical Engineering
Food, beverage and pharmaceutical industriesProductcatalog
Delta OHM Image brochure
Measurment technology for use in theFood, beverage and pharmceutical industries
31
Denmark
Netherlands
Italy
Czech Republic
Austria
GHM Messtechnik
GHM Meettechniek
GHM Maaleteknik
GHM Sales Offi ce
GHM Sales Offi ce
South Africa
Germany
GHM Messtechnik SA (PTY) LTD
GHM MĚŘICÍ TECHNIKA
Worldwide SalesEurope: AustriaBelgiumBulgariaDenmarkFinlandEstoniaFinland
FranceGreeceUnited KingdomIrelandItalyCroatiaLithuania
MoldovaNetherlandsNorwayAustriaPolandPortugalRomania
RussiaSwedenSwitzerlandSerbiaSlovakiaSloveniaSpain
Czech RepublicTurkeyHungaryUkraineBelarus
Worldwide: EgyptAustraliaBrazilChileChinaIndiaIsrael
JapanMalaysiaMoroccoOmanPhilippinesSingaporeSouth Africa
South KoreaTaiwanThailandUSAUnited Arab EmiratesVietnam
NetherlandsGHM Meettechniek BVZeeltweg 303755 KA Eemnes | NETHERLANDSPhone +31 35 53805-40Fax +31 35 [email protected]
Czech Republic / SlovakiaGHM Greisinger s.r.o.Ovci hajek 2 / 2153158 00 Prague 5 Nove Butovice | CZECH REPUPLICPhone +420 251 613828Fax +420 251 [email protected]
DenmarkGHM Maaleteknik ApSMaarslet Byvej 28320 Maarslet | DENMARKPhone +45 646492- 00Fax +45 646492- [email protected]
South AfricaGHM Messtechnik SA (Pty) Ltd16 Olivier StreetVerwoerdpark, Alberton 1453 | SOUTH AFRICAPhone +27 74 [email protected]
Italy Delta OHM S.r.l.Via Marconi 535030 Caselle di Selvazzano Padova (PD) | ITALYPhone +39 049 [email protected]
Sales Subsidiaries
Sales Offi cesAustriaAlfred FröstlBreitenseer Str. 76/1/361140 Vienna | AUSTRIAPhone +43 660 [email protected]
ItalyAndrea CasatiVia Marconi 535030 Caselle di Selvazzano Padova (PD) | ITALYPhone +39 049 [email protected]
GHM GROUP - GreisingerGHM Messtechnik GmbHHans-Sachs-Straße 2693128 Regenstauf | GERMANYPhone +49 9402 9383-0Fax +49 9402 [email protected]
GHM GROUP - HonsbergGHM Messtechnik GmbHTenter Weg 2-842897 Remscheid | GERMANY
GHM GROUP - MartensGHM Messtechnik GmbHKiebitzhörn 1822885 Barsbüttel / Germany
GHM GROUP - ImtronGHM Messtechnik GmbHCarl-Benz-Straße 1188696 Owingen | GERMANY
GHM GROUP - Delta OHMDelta OHM S.r.l. a socioVia Marconi 535030 Caselle di Selvazzano, Padova (PD) | [email protected]
GHM Centers of Competence
GHM GROUP CORPORATE
GHM Messtechnik GmbH | Schloßstraße 6 | 88453 Erolzheim | GERMANY
Phone +49 7354 937233-0 | [email protected] | www.ghm-group.de