products and services...the total fall distance is the minimum vertical distance between the wo rker...
TRANSCRIPT
Products and Services
Products and Services
US Fall Protection specializes in the turn-key installation of
permanent fall protection systems. USFP has completed projects
from New York to Alaska to Costa Rica and everywhere in between.
Turn Key Operation
At USFP our goal is to provide a safe and practical solution for all of
your fall protection needs. We pride ourselves with our ability to
provide a true 100% turn-key installation including any required
roofing work.
We work directly with the nation’s largest roofing manufacturers to make sure our systems do not void any existing warranties.
USFP has many different fall protection systems which include
Guardrail, Lifelines, Overhead Rail, Warning Line, Ladders, Roof
Hatch Surrounds, Stairs and Platforms and Skylight covers just to
name a few. We also provide safety assessments, window washing
anchor testing and recertification, Complete installation, and
custom design and engineering.
Horizontal Lifelines
Horizontal lifelines are a cost
effective way to allow your workers
safe access to all areas of the roof.
We have multiple systems available
allowing us to attach to almost any
roof structure.
3rd party engineering and P.E.
stamps are available for our installed
horizontal lifeline systems upon
request.
USFP has a long history of working
with some of the largest roofing
manufacturers in the US and are
experts at performing retrofit
installations.
Guardrail Systems
All of our guardrail systems are
designed to meet current OSHA/ANSI
Standards.
We have multiple product lines
available allowing us to provide a
system that meets a customer’s specific needs or budget.
Guardrails are a passive system and
stop a fall before it happens. They
require no special training on how to
use the system correctly. Systems
available in safety yellow, galvanized,
aluminum or can be custom painted to
match your building’s exterior.
Fixed Ladder Protection
1910.28(b)(9)
New Rules phase in a requirement
for employers to have ladder safety
or personnel fall arrest systems for
fixed ladders over 24 feet and phases
out the use of cages or wells for fall
protection. All new ladders must be
equipped with ladder safety or
personnel fall arrest system and by
20136 all ladders extending more
than 24 feet must have a ladder
safety or personnel fall arrest system.
Roof Hatch Protection
1910.23 Guarding Floor and Wall
Openings and Holes
Hinged floor opening cover of
standard strength and construction
equipped with standard railings or
permanently attached thereto so as
to leave only one exposed side.
When the opening is not in use, the
cover shall be closed or the exposed
side shall be guarded at both top and
intermediate positions by re-
movable standard railings.
Testing and Recertification
USFP can recertify and /or test
existing anchors or horizontal
lifeline systems designed for
window washing.
Testing procedures are written and
stamped by 3rd party professional
engineers and performed on-site by
a fall protection specialist.
Multi-year recertification/inspection
programs are required in order for
systems to remain in compliance.
Skylights
The Overlooked Hazard
1910.23 (a)(4) Every
skylight floor opening and
hole shall be guarded by a
standard skylight screen or
a fixed railing on all ex-
posed sides.
We offer skylight screens
and guardrail systems
allowing you to comply
with OSHA regulations
Rigid Rail Systems
Ceiling and wall mounted rigid
rail systems for the trucking, rail,
auto-motive, airline and
maintenance facilities.
Fixed systems can be configured in
many ways to allow up to 4
workers to be able to pass each
other at any given time.
We have several manufacturers
with configurations for fixed and
freestanding situations.
Specifications
• Fall Arrest for 2 workers
• Fall Restraint for 2 workers
• Flat Free Tires
• Ships Jobsite ready
• Optional cover for when not in use
Many other cart options available
Standing Seam Anchors The standing seam anchor is a
revolutionary product allowing
homeowners, building owners, and
contractors to work safely on standing
seam roofs without penetrating the
panels,
Customized Crossovers
and Platforms
Crossover platforms
eliminate trip hazards suck
as pipes, walls, expansion
joints, and provide access to
lower or higher roof levels.
OSHA general requirements
state that when there is a
break in elevation of 19” or more and no ramp then the
employer must provide a
stairway or ladder at all
worker points of access.
Zinc-Plated Steel Anchorage Device
Galvanized O-Ring: 3.75” Round
Galvanized O-Ring Thickness: 0.4”
Anchor Size: 2” x 4” x 6”
Base Thickness: 3/8”
Bolts: 1/2”-13, 2-1/2” Grade 5
with 1/2” Lock Washers
Strength Rating: 5,000 lbs.
Capacity: 130-310 lbs.
(Worker with Tools)
The Alsipercha system is a highly effective and versatile fall arrest
solution. With its unique design, the Alsipercha product has a fall
factor
of ZERO. A fall factor of ZERO means that the worker’s arresting
distance is extremely minimal allowing for them to return to work very safely and very quickly after rescue.
ALSIPERCHA
• Fall Factor of ZERO
• Rotates up to 360 degrees
• Built in shock absorber • Ideal for decking, forming, and leading edge work
• Can be used for unloading trucks, performing maintenance
on equipment and machinery
• Multiple attachments
• Has a working radius of up to 23 feet • Maximum height of 23 feet The Alsipercha System is engineered and tested by an
independent 3rd party.
STANDARDS COMPLIANCE: ANSI Z359.6 / OSHA 1926 Sub M App C
OSHA 1910 Sub I App D
CSA Z259.16
Our newest and most versatile product, The ALSIPERCHA
The Need for a Rescue Plan 1926.502(d)(20) There is a legal
obligation to have a full and
comprehensive rescue plan in place
when individuals are working at
height.
Contact www.usfallprotection.com
855 693 8824/859 393 8330
7450 Industrial Rd. Florence, KY 41042
Introducing The Latchways Personnel Rescue Device solves this requirement.
This PRD is an integrated harness system allowing self rescue. In the
event of a fall this PRD harness sus-pends the user and then allows a
gentle lowering to the ground in a controlled de-scent.
https://www.youtube.com/watch?vv=C_l2Y2KSjcA
Definitions:
Fall Restraint System - A fall restraint system (FRS) prevents the user from
falling. The system is comprised of a body harness along with an anchorage,
connectors and other equipment. The components typically include a lanyard
and also may include a lifeline and other devices.
Personal Fall Arrest System (PFAS) - Fall protection must be provided if
workers are exposed to a fall of 6 feet or more to a lower level. When used
properly, this will arrest a fall and prevent the worker from contacting a lower
level. A PFAS consists of an anchor, a harness, and a lifeline or lanyard (usually
with a deceleration device). A PFAS must be used properly to be effective.
Adjust the harness to fit snugly. The D-ring attachment for the harness should
be centered between the worker’s shoulder blades and the leg straps should be adjusted until they are snug. Fall arrest systems must be designed and set
up to prevent a worker from free falling more than 6 feet or contacting a
lower level (e.g., the floor or the ground) (29 CFR 1926.502(d)(16)(iii)).
Body belts are not acceptable in a PFAS because they can cause serious injury
during a fall (29 CFR 1926.502(d)).
Competent Person - A person who is proficient in identifying existing and
predictable fall hazards, and who has the authority to stop work in order to
eliminate hazards. A highly trained and experienced person who is assigned
by the employer to be responsible for all elements of a fall safety program,
including, but not limited to, its regulation, management, and application. Authorized Person - A person who is assigned by their employer to work
around or be subject to potential or existing fall hazards.
It is the responsibility of a qualified or competent person trained in fall
protection to supervise the job site and ensure all applicable safety
regulations are complied with during installation of any fall protection
system.
Fall Clearance The total fall distance is the minimum vertical distance between the worker and a
lower level that is necessary to ensure that
the worker avoids contact with the lower level during a fall. It is important that
employers calculate this distance before
work begins to ensure that the proper fall protection equipment is selected for
the location. To determine the total fall distance, several factors must be taken
into consideration:
• Free Fall Distance: The distance the worker falls before the PFAS begins to
slow the fall. This distance must be 6 feet or less for a
PFAS29CFR1926.502(d)(16)(iii)).
• Deceleration Distance: The distance the lanyard stretches in order to arrest
the fall. OSHA requires that this distance be no greater than 3.5 feet (29
CFR1926.502 (d)(16)(iv)), but it may be less for some PFAS equipment.
• D-ring Shift: How far the D-ring shifts and the harness stretches when it
supports the full weight of a fallen worker, including the weight of tool belts
and other attached equipment or tools. Employers typically assume this shift
is 1 foot, but it can vary, depending on the equipment design and the
manufacturer.
• Back D-ring Height: The height of the D-ring, measured as the distance
between the D-ring and the sole of the worker’s footwear. Employers often
use a standard distance of 5 feet for this height, assuming a worker who is 6
6 feet tall. The D-ring height needs to be adjusted for very tall workers, and
for shorter workers as well.
• Safety Margin: An additional distance (typically a minimum of 2 feet) to
ensure that there is enough clearance between the worker and the lower
level after a fall.