product overview suction guns, suction machines, vac-blast

Surface Cleaning Technology

3300

_EN

_ 201

8022

1 _Sa

ugge

raet

e_G

esam

tpro

gram

m |

TiS

Product overview

Suction Guns, suction machines, Vac-Blast Cleaners

Intelligent air utilisation Compressed air passes a ring nozzle thus creating a vacuum within the suction tube. This vacuum systema-tically sucks off dry and slightly oily particles, abrasions and short chips instead of redistributing them via an uncontrollable compressed air blast.

www.wandres.com 3

12

10

8

6

4

Contents

These nozzles provide a constant suction air flow at machines, installations and production lines.

The Vac-Blast Cleaner removes and effectively sucks off virtually inaccessible particles from recesses and bore holes.

The Aerosol Suction Cleaner systematically sucks off moist particles such as short metal chips during thread cutting.

The above machines may be equipped with brushes, nozzles, filters and debris containers. They may thus adapt to a great variety of different applications.

Suction Gun SP 14

Suction nozzle FD 10/FD 14

Seite

The Suction Gun SP 14 systematically sucks offabrasions, contaminating particles and short chips at assembly work stations and work-shops.

Vac-Blast Cleaner BS 14/MS 14

Aerosol Suction Cleaner MS 15

Options / accessories

www.wandres.com4

Suction Gun SP 14

Brief description

The Suction Gun SP 14 is ideal to remove non-toxic particles and short chips with a precise suction mechanism. It functions according to the Venturi principle: Compressed air passes a ring nozzle thus creating a vacuum within the suction tube. The incoming air conducts transports the particles and chips towards the exhaust air hose. Suction performance may be regulated infinitely via a hand lever. Different brushes, nozzles and filters are available as an option. The Suction Gun may be used for a wide variety of different industry applications.

Technical data

Compressed air Connection NW 10 mm; 6 barConsumption 420 Nl/minCompressed air Category 5 according to DIN ISO 8573-1Particles Max. particle size 40 μm, Max. particle density 10 mg/m3

Water Pressure condensation point 7º C Water content: 7800 mg/m3

Suction capacityVacuum -350 mbar (35%)Suction volume flow 500 Nl/min Acoustic emission 80 dB (A)Weight 460 gParticle diameter Max. 9.5 mm with round suction tube Max 3 mm with flat suction tube or flat nozzle/brush

Technical information is subject to changes.

Ø 10

Suction tube ø 14

Exhaust air

ø 20

Com

pres

sed

air

www.wandres.com 5

For dry or moist particles, e.g. non-toxic dust particles or short chips during thread cutting

For dry, non-toxic particles and short metal chips


For moist particles, e.g. short metal chips during thread cutting

For moist particles, e.g. short metal chips during thread cutting

Order code

014-212 Suction Gun SP 14 Suction tube 14 mm

Connection for exhaust air 20 mm

014-211 Suction Gun SP 14 WS with felt filter bag

Suction tube Ø 14 mm including

- Felt filter bag with screw cap - 0.3 m anti-static hose Ø 20 mm

014-221 Suction Gun SP 14 MB 1.5 with 1.5 litre container and felt filter bagSuction tube Ø 14 mm

including - 1.5 litre container with felt filter bag and support with mounting bracket to wall - 3 m compressed air hose Ø 10 mm - 3 m anti-static hose Ø 20 mm

014-231 Suction Gun SP 14 MB 1.5with 1.5 litre container and aerosol filterSuction tube Ø 14 mm

including - 1.5 litre container with aerosol filter and support with mounting bracket to wall - 3 m compressed air hose Ø 10 mm - 3 m anti-static hose Ø 20 mm

014-251 Suction Gun SP 14 MB 30with 30 litre container and two aerosol filtersSuction tube Ø 14 mm

including - 30 litre container with two aerosol filters - 3 m compressed air hose Ø 10 mm - 3 m anti-static hose Ø 20 mm

ø 14

ø 14ø 20

ø 20

ø 20

ø 10

ø 10

ø 10

ø 10

ø 14ø 20

ø 10

ø 14

ø 14

www.wandres.com6

110±5

ø 20

ø a

ø 5,5 G 1/4" compressed air connection

Suction tube

Exhaust air

30

Suction nozzle FD..

Brief description

The suction nozzle FD.. has been designed for the integration into machines, complete installations and production lines. It may be run continuously without any maintenance works. There are two bore holes to mount the nozzle to existing appliances. You may remove rubbed-off parts, short chips or dust particles.

The nozzle functions according to the Venturi principle: Compressed air passes a ring nozzle thus creating a vacuum within the suction tube. The incoming air transports the parti-cles and chips towards the exhaust air hose.

Two types of this suction nozzle are available. FD 10 with a suction tube diameter of 10 mm and FD 14 with a suction tube of 14 mm. The latter may also be equipped with a variety of brushes and nozzles that may be put onto the suction tube.

Technical data

Compressed air Connection 1/4"; 6 barConsumption FD 10: 290 Nl/min FD 14: 440 Nl/minCompressed air Category 5 according to DIN ISO 8573-1Particles Max. particle size 40 μm, Max. particle density 10 mg/m3


Oil Residual oil 25 mg/m3

Suction capacityVacuum -350 mbar (35%)Suction volume flow FD 10: 250 Nl/min FD 14: 500 Nl/min Acoustic emission FD 10: 79 dB (A) FD 14: 83 dB (A)Weight FD 10: 140 g FD 14: 160 gSuction tube diameter (ø a) FD 10: 10 mm for max. particle size 7 mm FD 14: 14 mm for max. particle size 9.5 mm


www.wandres.com 7

ø 20

G 1/4"

ø 10

ø 20

G 1/4"

ø 14

110±5

110±5

For dry or moist particles, e.g. rubbed-off parts, short chips or dust particles

Order code

014-010 Suction Gun FD 10 Suction tube 10 mm for parts with max. size of 7 mm - Connection for exhaust air Ø 20 mm - Compressed air connection for compressed air hose Ø 8 mm - Two mounting holes Ø 5.5 mm

014-020 Suction Gun FD 14 Suction tube 14 mm for parts with max. size of 9.5 mm - Connection for exhaust air Ø 20 mm - Compressed air connection for compressed air hose Ø 8 mm - Two mounting holes Ø 5.5 mm

www.wandres.com8

Suction hose Ø 15

Compressed air hose Ø 3 Button to activate compressed air jet

Suction airCompressed air

Vac-Blast Cleaner BS 14../MS 14..

Brief description

The Vac-Blast Cleaner BS 14/ MS 14 is ideal to remove non-toxic particles and short chips with a precise suction mechanism. The suction air flow functions according to the Venturi principle: Compressed air passes a ring nozzle thus creating a vacuum within the suction tube. The incoming air transports the particles and chips towards the exhaust air hose and the debris container.

If you press the button at the vac-blast unit, an additional compressed air jet will be activated. This jet will be able to loosen persistent contamina-tions on surfaces or stuck particles within blind holes.

Different brushes, nozzles and filters are available as an option. The Vac-Blast Cleaner may be used for a wide variety of different industry applications including Clean Room applications.

Technical data

Compressed air Connection 1/4"; 6 barConsumptionsuction mode only BS 14: 420 Nl/min MS 14: 310 Nl/min+ blowing mode BS 14: 460 Nl/min MS 14: 350 Nl/minCompressed air Category 5 according to DIN ISO 8573-1Particles Max. particle size 40 μm, Max. particle density 10 mg/m3



Suction capacityVacuum BS 14: -300 mbar (30%) MS 14: -290 mbar (29%)Suction volume flow BS 14: 380 Nl/min MS 14: 230 Nl/minAcoustic emissionsuction mode only BS 14: 75 dB (A), MS 14: 62 dB (A)+ blowing mode BS 14: 77 dB (A), MS 14: 72 dB (A) Capacity debris container BS 14: 1.5 litres, MS 14: 2 litresParticle diameter Max. 7 mm Max 3 mm with flat nozzle (only suction mode)


www.wandres.com 9

For persistent or adhesive dry, non-toxic particles and short metal chips

For persistent or adhesive moist particles e.g. short metal chips in blind holes

For persistent or adhesive moist particles e.g. short metal chips in blind holes

Order code

014-602 Vac-Blast Cleaner BS 14 MB 1.5 with 1.5 litre container and felt filter bag Suction tube Ø 14 mm

including - 1.5 litre container with felt filter bag to be screwed on top and support with mounting bracket to fasten to wall - 1.5 m off anti-static exhaust air hose Ø 20 mm - vac-blast unit with 1.5 m off suction hose Ø 15 mm and 1.5 m off compressed air hose Ø 3 mm

014-603 Vac-Blast Cleaner BS 14 MB 1.5 with 1.5 litre container and aerosol filter Suction tube Ø 14 mm

including - 1.5 litre container with aerosol filter to be screwed on top and support with mounting bracket to fasten to wall - 1.5 m off anti-static exhaust air hose Ø 20 mm - vac-blast unit with 1.5 m off suction hose Ø 15 mm and 1.5 m off compressed air hose Ø 3 mm

014-806 Vac-Blast Cleaner MS 14 MB 2 with 2 litre container and aerosol filter Suction tube Ø 14 mm

including - 2 litre container with filter housing on top including 1 aerosol filter - 1.6 m off anti-static exhaust air hose Ø 20 mm - vac-blast unit with 1.6 m off suction hose Ø 15 mm and 1.6 m off compressed air hose Ø 3 mm

Suction hoseCompressed air hose

Compressed air supply(Ø 8 mm)

Compressed air supply(Ø 8 mm)

Suction hose Compressed air hose

Vac-Blast nozzle FD 14/1with ball valve

Vac-Blast nozzle FD 14/1with ball valve

Suction hoseCompressed air hose

www.wandres.com10

Aerosol Suction Cleaner MS 15 MB 2

Brief description

The Aerosol Suction Cleaner MS 15 MB 2 is ideal to remove moist particles, e.g. short metal chips during thread cutting. The sucking effect of the Aerosol Suction Cleaner MS 15 MB 2 is brought about by changing the position of a ball valve at the compressed air supply line.

The suction air flow functions according to the Venturi principle: Compressed air passes a ring nozzle thus creating a vacuum within the suction tube. The incoming air transports the particles and chips via the exhaust air hose to the debris container.

There is an aluminium filter housing on top of the debris container. It contains three fine filters for the separation of aerosols.

Different brushes, nozzles and filters are available as an option. The Aerosol Suction Cleaner may be used for a wide variety of different industry applications.

Technical data

Compressed air Connection 1/4"; 6 barConsumption 300 Nl/minCompressed air Category 5 according to DIN ISO 8573-1Particles Max. particle size 40 μm, Max. particle density 10 mg/m3



Suction capacityVacuum -340 mbar (34%)Suction volume flow 250 Nl/min Acoustic emission 68 dB (A)Capacity debris container 2 litres Particle diameter Max. 7 mm Max. 3 mm with flat nozzle


www.wandres.com 11

For moist particles e.g. short metal chips during thread cutting

Order code

015-806 Aerosol-Sauger MS 15 MB 2 with 2 litre container and three aerosol filters - Suction tube Ø 14 mm including - 2 litre container with filter housing on top containing 3 aerosol filters - Suction unit with 1.6 m off suction hose Ø 15 mm

Filter housing made of

anodized aluminium

3 aerosol filters

Ball valve

Transparent container

Max. level for debris

(2 litre)

Suction hose

200

0

500

600

1/4" compressed air connection

(6 bar)

ø 160

76ø 125

The machines may be used in a great variety of applications

An assortment of brushes and nozzles provide effectiveadaptation to the subject surface. Further equipment is available making the daily job with the Vac-Blast Cleaner even more agreeable.

www.wandres.com 13

18

19

17

16

15

14Brushes

Nozzles

Brush and nozzle sets

Filter

Hoses / other spare parts

Containers / accessories

Page

Round brushes are suitable both for the suctionand the blowing mode.

Flat nozzles may only be used for the suction mode.Exchange nozzles may be used for either the suctionor for the blowing mode.

Flat nozzles and flat brushes may only be used for the suction mode.Round brushes may be used for either the suction or the blowing mode.

Filters are suitable for dry and moist, non-toxic particles and short metal chips.

List of spares for Suction Guns, Vac-Blast Clea-ners, the Aerosol Suction Cleaner and suction nozzles

List of containers and other accessories for Suction Guns, Vac-Blast Cleaners and the Aerosol Suction Cleaner

Options / accessories

www.wandres.com14

Round brushes may be used either in the suction or the blowing mode.

41 06 033 Double round brush Ø 50 mm with soft bristles

Nominal width 14 mmBlack polyamide bristles Bristle diameter 0.1 mm

Bristle length:outer bristle ring 20 mminner bristle ring 10 mm

Order code

41 06 052 Round brush Ø 22 mm with hard bristlesNominal width 14 mm Black polyamide bristles Bristle diameter 0.2 mmBristle length 8 mm

41 06 015 Round brush Ø 40 mm with soft bristlesNominal width 14 mmBlack polyamide bristlesBristle diameter 0.1 mmBristle length 10 mm

41 06 053 Round brush Ø 24 mm with soft bristlesNominal width 14 mm White polyamide bristles pointing outwards Bristle diameter 0.1 mmBristle length 8 mm

41 06 054 Round brush Ø 24 mm with hard bristlesNominal width 14 mm Black polyamide bristles pointing outwards Bristle diameter 0.2 mmBristle length 8 mm

41 06 051 Round brush Ø 22 mm with soft bristlesNominal width 14 mmWhite polyamide bristles Bristle diameter 0.1 mmBristle length 8 mm

20ø 14

ø 14

ø 24

8

ø 14

ø 24

8

8

ø 14

ø 22

8

ø 14

ø 22

ø 50

8

ø 14

ø 40

Brushes

www.wandres.com 15

Flat nozzles may only be used in the suction mode.

10 04 014 Exchange nozzle with round suction tube made out of nickeled brass.Nominal width 14 mmSuction tube length 120 mmSuitable for Suction Nozzle FD 14 and Suction Gun SP 14

10 03 015 Exchange nozzle with round suction tube made out of stainless steelNominal width 10 mmSuction tube length 120 mmSuitable for Suction Nozzle FD 10

Order code

10 26 014 Flat nozzle with one row of hard bristlesNominal width 14 mmBlack polyamide bristlesBristle diameter 0.2 mmBristle length 10 mm

10 26 012 Flat brush with two rows of soft bristlesNominal width 14 mmBlack polyamide bristlesBristle diameter 0.1 mmBristle length 10 mm

10 04 015 Exchange nozzle with flat suction tube made out of nickeled brass.Nominal width 14 mmSuction tube length 120 mmSuitable for Suction Nozzle FD 14 and Suction Gun SP 14

10 03 016 Exchange nozzle with flat suction tube made out of stainless steelNominal width 10 mmSuction tube length 120 mmSuitable for Suction Nozzle FD 10

10 26 010 Flat nozzle without bristlesNominal width 14 mm

Nozzles

ø 14

70

10

ø 14

70

10

ø 14

70

120ø 14

120ø 10

120 5019

ø 14

120 5019

ø 10

www.wandres.com16

Flat nozzles and flat brushes may only be used in the suction mode.

Round brushes may be used either in the suction or in the blowing mode.

Order code

014-005 Seven-piece set of brushes and nozzles, containing:

- Round brush Ø 22 mm with soft bristles (41 06 051) - Round brush Ø 22 mm with hard bristles (41 06 052) - Round brush Ø 40 mm with soft bristlesn (41 06 015) - Doppel-Round brush Ø 50 mm with soft bristles ( 41 06 033) - Flat nozzle without bristles (10 26 010) - Flat brush with one row of hard bristles (10 26 014)) - Flat brush with two rows of soft bristles (10 26 012)

014-006 Four-piece set of brushes, containing:

- Round brush Ø 22 mm with soft bristles (41 06 051) - Round brush Ø 22 mm with hard bristles (41 06 052) - Round brush Ø 40 mm with soft bristlesn (41 06 015) - Double round brush Ø 50 mm with soft bristles (41 06 033)

014-004 Four-piece set of brushes and nozzles, containing:

- Round brush Ø 40 mm with soft bristles (41 06 015) - Flat nozzle without bristles (10 26 010) - Flat brush with one row of hard bristles (10 26 014)) - Flat brush with two rows of soft bristles (10 26 012)

Brush and nozzle sets

www.wandres.com 17



For moist particles e.g. short metal chips after thread cuttingNote:The Aerosol Suction Cleaner MS 15 MB 2 has three filter inserts. To replace the whole filter system you need to order three times part no. 91 06 159

Order code

11 01 001 Felt filter bag with screw lid and 0.3 m off anti-static suction hose Ø 20 mm

91 06 038 Felt filter bag to be screwed onto a 1.5 litre container

91 06 159 Filter insert for separation of aerosols

- for Suction Gun SP 14 with container and aerosol housing - for Vac-Blast Cleaner BS 14 MB 1.5 with aerosol housing - for Vac-Blast Cleaner MS 14 MB 2 - for Aerosol Suction Cleaner MS 15 MB 2

11 01 007 Replacement set containing filter insert and housing for separation of aerosols

The set may be screwed on top of container for

- Suction Gun SP 14 und - Vac-Blast Cleaner BS 14 MB 1.5

Filters

300 ø 20

300

170

www.wandres.com18

For Vac-Blast Cleaner BS 14 MB 1.5 and Vac-Blast Cleaner MS 14 MB 2

For Suction Nozzles FD 14 and FD 10,Vac-Blast Cleaners BS 14 MB 1.5 and MS 14 MB 2 as well as for Aerosol Suction Cleaner MS 15 MB 2

For Suction Gun SP 14

For Aerosol Suction Cleaner MS 15 MB 2

For Vac-Blast Cleaner BS 14 MB 1.5

For Vac-Blast Cleaner MS 14 MB 2

Order code

91 03 101 Compressed air hose Ø 3 mm

Black pneumatic hose made out of polyurethane. Please state desired length in metres in your order.


Black pneumatic hose made out of polyurethane. Please state desired length in metres in your order.


Black pneumatic spiral coiled hose made out of polyurethane. Please state desired length in metres in your order.

015-804 Suction unitincluding 1.6 m off suction hose Ø 15 mm and plug coupling

014-808 Vac-Blast unitincluding 1.5 m off suction hose Ø 15 mm and 1.5 m off compressed air hose Ø 3 mm

014-803 Vac-Blast unitincluding 1.6 m off suction hose Ø 15 mm and 1.6 m off compressed air hose Ø 3 mm

For Vac-Blast Cleaners BS 14 MB 1.5 and MS 14 MB 2 as well as for Aerosol Suction Cleaner MS 15 MB 2

91 03 266 Suction hose Ø 15 mm

Black pneumatic spiral coiled hose made out of polyurethane. Please state desired length in metres in your order.

For Suction Nozzles FD 14 and FD 10 andVac-Blast Cleaners BS 14 MB 1.5

91 03 009 Exhaust air hose Ø 20 mm

Black pneumatic spiral coiled hose made out of polyurethane. Please state desired length in metres in your order

For Vac-Blast Cleaner BS 14 MB 1.5

014-030 Vac-Blast Nozzle FD 14/1 with ball valve for particles with diameters up to 9.5 mm and 2 mounting holes Ø 5.5 mm

Ø 15 (incoming air)

Ø 3 (compressed air)Ø 8 (compressed air)

Ø 20 (exhaust air)

Hoses / other spare parts

www.wandres.com 19

➁

➂

➀

Order code

Containers / Accessories

For Suction Gun SP 14 and Vac-Blast Cleaner BS 14 MB 1.5

12 01 010 Support for 1.5 litre container With mounting bracket to fasten container to wall

20 24 011 2 litre container

Transparent plastic container with a capacity of 2 litres

91 50 200 1.5 litre container

Plastic container with a capacity of 1.5 litres. At the side, there is a connection for a suction hose Ø 20 mm. There is a screw connection on top of the container to mount either a felt filter bag or an aerosol filter.

210

115

200

105

105

For Suction Gun SP 14 MB 3091 50 302 30 litre container with one hose connection and two aerosol filters

Plastic container with a capacity of 30 litres. Screw lid with connection for a suction hose Ø 20 mm and thread for two aerosol filters

ø 35

ø 160

ø 20

500

ø 255

For Vac-Blast Cleaner BS 14 MB 1.5and MS 14 MB 2

For Vac-Blast Cleaner BS 14 MB 1.5and MS 14 MB 2 as well as for Aerosol Suction Cleaner MS 15 MB 2

10 36 060 Vac-Blast mounting

Support for vac-blast handle for continuous operations

➀ Drill hole for round rod Ø 14 mm ➁ Fix with M 6 headless pin ➂ Headless pin M 6 x 5 locks blowing mode in place for continuous operations

91 02 179 Foot pedal 1/4"

to regulate compressed air supply, with connection for compressed air hose Ø 8 mm

For Aerosol Suction Cleaner MS 15 MB 2 and Vac-Blast Cleaner MS 14 MB 2

Surface Cleaning Technology Surface Cleaning Technology

USAWandres Corporation719 W. Ellsworth Rd., Suite 7USA-Ann Arbor, MI 48108Tel. +1- 734- 214- [email protected]

GermanyWandres GmbH micro-cleaningIm Gewerbepark 8 D-79252 StegenTel. + 49 (0)7661- [email protected]

China

Wandres Cleaning Machinery (Shanghai) Co., Ltd.755B, Tower 3, No. 88 Keyuan Road Pudong, Shanghai, China 201203Tel. + 8621 68520069 [email protected]

product overview suction guns, suction machines, vac-blast

Documents