Product Manual - Standing Seam II - Roof Covering

RC01A/EA, Reinforcing Seam Clamp InstallationRC01/EA, Detail at SidelapRC02/SA, Reinforced Panel Clip Attachment DetailRC03/SA, Panel to Clip Fastening Base Accessory AttachmentRC04A/EA, Reinforcing Seam Clamp Mid-Span of Purlins DetailRC04/EA, Reinforcing Seam Clamp DetailRC06/SA, Roof Panel EndlapRC07/SA, Panel Lap DetailRC17/EA, Typical Clip Attachment to PurlinRC36/EA, Standing Seam II Seaming ApplicationsRC61/EA, Basic Parts and PiecesRC62/EA, Standing Seam II Erection ToolsRC63/EA, Panel Marking and NotchingRC64/SA, Sequence of Roof Panel ErectionRC65/EA, Standing Seam II Duckbill Vise GripsRC66/EA, Clamping Detail at EndlapRC67/EA, Installation of Panel ClipRC68/EA, Standing Seam II Seaming MachineRC69/EA, Standing Seam MirrorRC76/EA, Standing Seam II Deseamer

3/9/2018

RODUCT ANUALSTANDING SEAM ROOF PANEL

P M

Issued 9/28/2016

Reinforcing Seam Clamp Installation

Standing Seam II

RC01A/EA

To Section Index

Download the DWG file by clicking here.

RODUCT ANUALP M

Issued 9/28/2016

Detail at Sidelap

Standing Seam II

RC01/EA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Revised: 03.31.21 (MR2021.04)

Reinforced Panel Clip Attachment Detail

Standing Seam II

RC02/SA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Issued 9/28/2016

Panel to Clip Fastening Base Accessory Attachment

Standing Seam II

RC03/SA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Issued 9/28/2016

Reinforcing Seam Clamp Mid-Span of Purlins Detail

Standing Seam II Roof

RC04A/EA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Issued 9/28/2016

Reinforcing Seam Clamp Detail

Standing Seam II Roof

RC04/EA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Revised: 03.05.21 (MR2021.03)

Roof Panel Endlap

Standing Seam II

RC06/SA

To Section Index

Download the DWG file by clicking here.

TAPE MASTIC PAD

PURLIN

1'-0"±

STANDING SEAM

ROOF PANEL ENDLAP

PANEL CLIP

LOWER PANEL

RC06

SA

INSULATION

LAP STIFFENER

CAULK END OF PANEL SEAM 6"

SSLS-1

NOTE:

BE CLAMPED TOGETHER.(SEE APPROPRIATE CLAMPING DETAILS)

PRIOR TO INSTALLING LAP FASTENERS, PANELS MUST

UPPER PANEL

6"

ROOF TRIM FASTENER(S)H1030

1 1/2 TP

RC07SA

SAFETY PRECAUTION:DO NOT STEP ON PANELS UNTILFULLY SECURED WITH FASTENERS.

3"

3"

STRUCTURAL FASTENER

H1020 (H1025 w/INSULATION OVER 6")

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Revised: 03.05.21 (MR2021.03)

Panel Lap Detail

Standing Seam II

RC07/SA

To Section Index

Download the DWG file by clicking here.

PANEL LAP DETAIL

THE LOWER AND UPPER PANEL NOTCHES WILL BUTT TOGETHER TO FORM A CONTINUOUS SEAM. RELAX THE MIDDLE OF THEOVER EXISTING INSTALLED PANEL. PULL MIDDLE OF UPPER PANEL UP AND SLIDE 3" NOTCH UNDER LOWER PANEL MALE SEAM. IS COVERED. INSTALL THE UPPER PANEL BY LAPPING THE LOWER PANEL 6" AND ROLLING/SETTING UPPER PANEL FEMALE SEAM SSCK-1 (BUTYL LAP CAULK) TO INNER FACE OF BOTH MALE AND FEMALE SEAMS, MAKING SURE THAT BACK EDGE OF MALE NOTCHSTANDING SEAM LAP MASTIC ACROSS THE WIDTH OF THE PANEL BEGINNING AND ENDING AT THE VERTICAL SEAMS. APPLY UPPER PANEL, INSTALL THE LAP STIFFENER, SSLS-1 AS SHOWN ABOVE. THEN PLACE PRECUT LENGTH OF SPECIAL 1 1/2" X 1/8"

CLEANER BEFORE MASTIC APPLICATION.

ALL AREAS ON ALUMINUM COATED PANELS THAT REQUIRE MASTIC SHOULD BE WIPED CLEAN WITH A MILD ALL PURPOSE DETERGENT

NOTCHED TO ACCEPT PANEL LAP. THIS LAP WILL OCCUR APPROXIMATELY 12 INCHES ABOVE A PURLIN. PRIOR TO SETTING THE

WHEN ENDLAPS ARE REQUIRED THE UPPER 3 INCHES OF THE LOWER PANEL SEAM AND LOWER 3" OF THE UPPER PANEL SEAM ARE

DIMPLE

EAVE

STANDING SEAM PANEL

STANDING SEAM CLIP

SSCK-1BUTYL CAULK

TAPE MASTIC PAD1 1/2 TP

CAULK END OF PANEL SEAM 6"

LAP STIFFENER

SSCK-1BUTYL CAULK

CAULK END OFPANEL SEAM 6"

SURFACE. DO NOT STEP ON PANELS UNTIL FULLY SECURED

WITH FASTENERS.

DO NOT STEP ON RIB OF PANEL. ALWAYS STEP ON FLAT

SAFETY PRECAUTION

STANDING SEAM PANEL

RC07 SASTANDING SEAM

ROOF TRIM FASTENER TYP.H1030

SSLS-1

UPPER AND LOWER PANELNOTCHES BUTTED TOGETHER

3"

3"

3"

3"

UPPER AND LOWER PANELNOTCHES BUTTED TOGETHER

UPPER PANEL ONTO PREVIOUSLY INSTALLED TAPE MASTIC AND CLAMP PANEL ENDLAP PER INSTRUCTIONS. NOW SECURE THE LAP WITH H1030 ROOF FASTENERS INSTALLED AT THE PRE-DIMPLED LOCATIONS WHILE CLAMPS ARE STILL IN PLACE. DONOT REMOVE CLAMPS UNTIL ALL REQUIRED FASTENERS ARE INSTALLED.

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Revised: 03.05.21 (MR2021.03)

Typical Clip Attachment to Purlin

Standing Seam II

RC17/EA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM IIPANEL

PANEL CLIP

PURLIN

STANDING SEAM II

TYPICAL CLIP ATTACHMENT TO PURLIN

H1020 (H1025 w/INSULATION OVER 6")STRUCTURAL FASTENER(S)

RC17

EA

(2) PER CLIP

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Issued 9/28/2016

Standing Seam II Seaming Applications

RC36/EA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Revised: 03.05.21 (MR2021.03)

Basic Parts and Pieces

Standing Seam II

RC61/EA

To Section Index

Download the DWG file by clicking here.

SAFETY PRECAUTION:ALWAYS WEAR GLOVES WHEN

HANDLING MATERIALS.

METAL OUTSIDE CLOSURE

SSMOCMETAL EAVE CLOSURE

EA

RC61BASIC PARTS AND PIECES

STANDING SEAM II PANEL CLIP

STANDING SEAM II

SSMC-I

THERMAL BLOCK

SSPC-1 W/O THERMAL BLOCKS

UNDER NO CIRCUMSTANCES SHOULD STANDING SEAM II OR 360 BE USED WITHOUT BLANKETIN HIGH WINDS IF INSULATION IS NOT USED. STANDING SEAM II AND 360 ARE NO DIFFERENT.STANDING SEAM PANELS IN GENERAL ARE KNOWN FOR THEIR TENDENCY TO RUMBLE

INSULATION BETWEEN THE PANEL AND THE PURLIN/BAR JOIST.

STANDING SEAMSTANDING SEAM

SSPC-2TW/ TB1T THERMAL BLOCKS

TB1T

Note:Factory Mutual jobs (FM Rating) mayrequire additional or different fastenersand clips.

*

IF REQ'D, USE REINFORCED PANEL CLIP (SSCH)

IN CONJUNCTION WITH SSPC-_ IN DESIGNATEDAREAS.

**

**

**

FOR USE AT UNINSULATED ROOFS

1/2" x 2 1/2" x 50'-0" EPS, FOAM SPACER TAPE

50'-0" ROLL

STANDING SEAM LAP STIFFENER

SSLS-1

FASTENERSSECONDARY MATERIAL

(2) H1070 (H1075 w/INSULATION OVER 6")11 GA. - 1/2"

16 GA. - 12 GA. (2) H1020 (H1025 w/INSULATION OVER 6")

THICKNESS

CLIP ATTACHMENT

ROOF FASTENERH1030

*

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Issued 9/28/2016

Standing Seam II Erection Tools

RC62/EA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Issued 9/28/2016

Panel Marking and Notching

Standing Seam II

RC63/EA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Issued 9/28/2016

Sequence of Roof Panel Erection

Standing Seam II

RC64/SA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Issued 9/28/2016

Standing Seam II Duckbill Vise Grips

RC65/EA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Issued 9/28/2016

Clamping Detail at Endlap

Standing Seam II

RC66/EA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Revised: 03.05.21 (MR2021.03)

Installation of Panel Clip

Standing Seam II

RC67/EA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Issued 9/28/2016

Standing Seam II Seaming Machine

RC68/EA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Issued 9/28/2016

Standing Seam Mirror

RC69/EA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM ROOF PANEL

RODUCT ANUALP M

Issued 9/28/2016

Standing Seam II Deseamer

RC76/EA

To Section Index

Download the DWG file by clicking here.

STANDING SEAM ROOF PANEL