product guide - johnnichollstrade.co.uk · insert for adding in-cistern blocks compatible with...

Product and Installation Guide Washroom & Bathroom 2011 1

Product Guide

Duofix WC frames Page 3

Concealed cisterns Page 9

WC flush plates 4

Remote flushing kits Page 21

Duofix basin frames Page 27

Taps Page 28

Duofix bidet frames Page 42

Duofix urinal frames Page 43

Accessories Page 57

Drainage Page 62

Traps Page 67

Fill and flush valves for ceramic cisterns Page 77

Geberit AquaClean Page 79

Spares Page 97

Installation Guide

Main methods of Duofix installation Page 111

Waste and drainage connection Page 117

Numerical Index Page 121

2 Product and Installation Guide Washroom & Bathroom 2011

Product Guide

Compatibility - Flush plates and buttons

Flush plates UP320 UP720 UP200 AP123Sigma10 Rumba Tango Mambo

✓ ✓

Sigma20 Sigma50 Sigma60 Samba Bolero

✓ ✓

HyTronic infra-red 115.890.00.1115.891.00.1

115.855.00.1

Large Access Cover Plate

✓ ✓

Kappa20 Kappa50 Artline Kappa21

✓

Small Access Cover Plate

✓

HyTouch single flush buttons

Short wall palm 115.114.xx.1241.199.xx.1

Long wall finger241.144.00.1

Short wall finger115.947.xx.1.xx.1

Long wall finger115.943.21.1

Short wall palm 115.949.21.1241.282.21.1

Palm push 115.941.xx.1

115.114.xx.1115.947.xx.1115.949.21.1115.943.21.1115.941.xx.1

115.114.xx.1115.947.xx.1115.949.21.1115.943.21.1115.941.xx.1

241.199.xx.1241.198.xx.1241.282.21.1241.144.00.1115.941.xx.1

HyTouch dual flush buttonsHand push115.942.xx.1

Finger push115.999.21.1

Finger push115.075.21.x

115.942.xx.1 115.075.21.x 115.942.xx.1

HyTronic infra-red buttonsSensor flush 115.857.xx.1

Insert for in-cistern blocks115.612.00.1

Insert for adding in-cistern blocks compatible with Geberit’s Sigma10, 20 and 50 range of flush plates

Product GuideDuofix WC frames


Duofix WC frames

Duofix WC frame 1.12 m with UP320 for Sigma flush plates - PreWall

Application

• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres

• For installation in a room-height Duofix system wall in front of a solid or drywall construction

• For mounting in front of a solid or drywall construction• For a screed of 0 - 200 mm (not in room height applications)• For connecting Geberit AquaClean

Characteristics

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• With wall brackets to allow up to a 200 mm duct. For larger ducts up

to 400 mm use extension bolts 111.887.00.1• Tool-free fastening for outlet bend, sound-absorbing, adjustable in

depth with 8 positions, adjustable range 45 mm• Connection hose to angle stop valve can be screwed without tools• Water supply connection at centre back or at the top• UP320 concealed cistern with front actuation• Dual flush with Sigma60, Sigma50, Sigma20, Samba or Bolero flush

plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Dual flush with HyTouch pneumatic button• Single flush with HyTronic infra-red flush or HyTouch flush pneumatic

buttons• The protection cover protects the service opening against moisture

and dirt • Protection cover for service opening can be mounted without tools

and cut to length• Universal water supply connection compatible with MeplaFix, can be

mounted and operated without tools• Self-locking feet for tool-free alignment of the element. (Friction feet

have to be locked with spanner)• For pans with contact surfaces smaller than 170 mm (see accessory

111.847.00.1)• Flush valve features settings to enable either a 6l and 3l flush or a 4.5l

and 3l flush. For flush volumes of 4l and 2l a low flush beaker is required (241.894.00.1)

Product Details

Additional Note2 Duofix PreWall brackets for system; Water supply connection R 1/2" with integrated angle stop valve and hand wheel; Conduit pipe for the water supply connection of Geberit AquaClean; Flush bend; Protection plug; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; Fastening material

Excluded: Flush plate

Ordering Information

Duofix WC frames

0

0-20

100

50R½

73

1045

23

112

18/2318/23

195 ≥ 30

0

100

48

9-135

12 6

41max. 62

Flow pressure range 0.1–10 bar

Operating temperature water max. 25 °C

Flush volume small range 3–4 l

Flush volume factory setting 5.8 and 3 l

Article no. PU1 PU4

111.383.00.5 1 12



Duofix WC frame 1.12 m with UP320 for Sigma flush plates

Application


• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm (not in room height applications)• For connecting Geberit AquaClean

Characteristics

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• Tool-free fastening for outlet bend, sound-absorbing, adjustable in


plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Dual flush with HyTouch pneumatic button• Single flush with HyTronic infra-red flush or HyTouch flush pneumatic

buttons• The protection cover protects the service opening against moisture


and cut to length• Cistern can be reversed to give access from behind in a duct situation

when flushed with HyTouch pneumatic buttons or HyTronic sensor flush

• Universal water supply connection compatible with MeplaFix, can be mounted and operated without tools

• Self-locking feet for tool-free alignment of the element. (Friction feet have to be locked with spanner)

• For pans with contact surfaces smaller than 170 mm (see accessory 111.847.00.1)

• Flush valve features settings to enable either a 6l and 3l flush or a 4.5l and 3l flush. For flush volumes of 4l and 2l a low flush beaker is required (241.894.00.1)

Product Details

Additional NoteWater supply connection R 1/2" with integrated angle stop valve and hand wheel; Conduit pipe for the water supply connection of Geberit AquaClean; Flush bend; Protection plug; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; Fastening material

Excluded: Flush plate; PreWall brackets; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm


0

0-20

100

50R½

73

1045

23

112

195 ≥ 30

18/23

0

100

48

9-135

12 6

41max. 62





Article no. PU1 PU4

111.384.00.5 1 12



Duofix WC frame 0.98 m with UP200 for Kappa flush plates - PreWall

Application


• For installation in a partial-height Duofix system wall in front of a solid or drywall construction

• For mounting in front of a solid or drywall construction• For a screed of 0 - 200 mm

Characteristics

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Fast adjustment of the actuator rods for flush plate• Concealed cistern fully insulated against condensation• Protection housing for service opening, can be cut to length• Frame height 980 mm• With wall brackets to allow up to a 200 mm duct. For larger ducts up

to 400 mm use extension bolts 111.887.00.1• Concealed cistern UP200 with front or top actuation• Dual flush with flush plates Artline or Kappa flush plates• Dual flush with HyTouch pneumatic button• Single flush with HyTouch pneumatic and mechanical buttons• Water supply connection left• Fastening for outlet bend sound-absorbing• Connection hose to angle stop valve can be screw-connected by

hand• For pans with contact surfaces smaller than 170 mm (see accessory

111.847.00.1)• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual

flush requires material number 242.310.00.1 (note: must be used with pans designed for low volume flush)

Product Details

Additional Note2 Duofix PreWall brackets for system; Water supply connection R 1/2" with integrated angle stop valve; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, ø 90/110 mm; Protection plug; Fastening material



Duofix WC frame 0.82 m with UP200 for Kappa flush plates - PreWall

Application



• For mounting in front of a solid or drywall construction• For a screed of 0 - 200 mm

Characteristics

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Fast adjustment of the actuator rods for flush plate• Concealed cistern fully insulated against condensation• Protection housing for service opening, can be cut to length• Frame height 820 mm• With wall brackets to allow up to a 200 mm duct. For larger ducts up

to 400 mm use extension bolts 111.887.00.1• Concealed cistern UP200 with front or top actuation• Dual flush with flush plates Artline or Kappa flush plates• Dual flush with HyTouch pneumatic button• Single flush with HyTouch pneumatic and mechanical buttons• Water supply connection left• Fastening for outlet bend sound-absorbing• Connection hose to angle stop valve can be screw-connected by

hand• For pans with contact surfaces smaller than 170 mm (see accessory

111.847.00.1)• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual


Product Details

Additional Note2 Duofix PreWall brackets for system; Water supply connection R 1/2" with integrated angle stop valve; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, ø 90/110 mm; Protection plug; Fastening material






Article no. PU1

111.292.00.1 1

33

98

50

18/23

23

0-20

0

R1/2

915

195

73

≥ 30

91

max. 107

0

48

41

66

min. 17

max. 62

9-135




Article no. PU1

111.242.00.1 1

82

50

18/23

22

0-20

0

R1/2

32

755

73

195 ≥ 30

75

0

48

40

max. 9166

min. 17

max. 62

9-135



Duofix WC frame 1.12m with UP720 for Sigma flush plates - PreWall New

Application


• For installation in a room-height Duofix system wall in front of a solid or drywall construction

• For installing in a load bearing stud wall• For installation in split-height PreWall construction in front of a solid or

drywall construction• For installation in room-height PreWall or partition wall• For connecting Geberit AquaClean• Is not allowed to be embedded in concrete at full room height

Characteristics

• Self-supporting• Frame height 1120 mm• M12 fastening for ceramic appliances, fastening distance 18 cm or

23 cm • Geberit Sigma concealed cistern 8 cm (UP720), front actuation• Concealed cistern fully insulated against condensation• Protection cover for service opening can be mounted without tools

and cut to length• Water supply connection at the top, offset to the left side• Universal water supply connection compatible with MeplaFix, can be

mounted and operated without tools• Connection hose to angle stop valve can be screwed without tools• Sound-absorbing actuator rods, tool-free, fast adjustment• Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Dual flush with Sigma60, Sigma50, Sigma20, Samba or Bolero flush

plates • Adjustable flushing volume• Not suitable for use with flush buttons• The protection cover protects the service opening against moisture

and dirt • Outlet bend depth with vertical connection 9 cm• Fastening for outlet bend adjustable in depth and sound-absorbing• Installation depth at least 8 cm with vertical drainage connection• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet galvanised, adjustable 0-12 cm• Self-locking feet for tool-free alignment of the element. (Friction feet


111.847.00.1)• Element depth 8 cm

Product Details

Additional NoteWater supply connection R 1/2" with integrated angle stop valve and hand wheel; Two protection plugs; Protection housing for service opening; Flush bend; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, PE-HD, ø 90 mm, extended; Adaptor sleeve, HDPE, ø 90/110 mm; Conduit pipe for the water supply connection of Geberit AquaClean; 2 PreWall brackets; Fastening material



Duofix WC frame 0.79 m with furniture concealed cistern - pneumatic

Application


• For installation in bathroom furniture with full length front panel (not for use with front plinths)

• For furniture with an internal dimension of 465 mm wide, the item can not be used with side plinths

• For dual flush

Characteristics

• Pneumatic flush actuation• Front or top actuation• Water supply connection at the bottom left• Self-supporting• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm

Product Details

Additional NoteDual flush actuator


0-12

≥ 34

16

0

23

100

R½59

18/23 112

98

45

98

1-58

0-12

0

41≤ 62

0-12

0

9

48

135




Article no. PU1 PU4

111.729.00.1 1 12




Article no. PU1

111.706.00.1 1

10

465

0

0-20

79

18/23

195

195−315

0



Duofix WC corner frame 1.12 m with UP320 for Sigma flush plates

Application


• For installation as a corner element in front of a drywall, solid wall, Duofix system wall

• For a screed of 0 - 200 mm (not in room height applications)• For connecting Geberit AquaClean

Characteristics

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with axis centre mark• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• Connection hose to angle stop valve can be screwed without tools• Water supply connection at centre back or at the top• UP320 concealed cistern with front actuation• Dual flush with Sigma60, Sigma50, Sigma20, Samba or Bolero flush

plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Dual flush with dual flush HyTouch pneumatic and mechanical buttons• Not suitable for use with flush buttons• The protection cover protects the service opening against moisture



mounted and operated without tools• Telescopic profiles to fasten to the wall and for fastening panelling• Telescopic profiles with detent mark• Wall fixture variable from 30° to 60°• Narrow leg supports allow for lateral offset of the drainage pipe• Support for front, top and lateral panelling• Variable element depth (see page 116)• For pans with contact surfaces smaller than 170 mm (see accessory

111.847.00.1)• Flush valve features settings to enable either a 6l and 3l flush or a 4.5l


Product Details

Additional NoteWater supply connection R 1/2" with integrated angle stop valve and hand wheel; Flush bend; Conduit pipe for the water supply connection of Geberit AquaClean; Protection plug; Installation kit for electrical connection; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; WC connection set, ø 90 mm; Fastening material






Flush volume factory setting 6 and 3 l

1045

1120

0

0-200

500-760R½

180/230

1000

230

90

0

1000

128

48

110

60

410max. 6202010

Article no. PU1 PU4

111.399.00.5 1 10



Duofix WC frame 1.12 m with UP320 for Disabled WC and Sigma flush plates

Application


• For wall-hung WC with projection > 620 mm• For installation in a partial-height Duofix system wall in front of a solid

or drywall construction• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For mounting in front of a solid or drywall construction (order PreWall

brackets 111.844.00.1 separately)• For installation in split-height PreWall construction in front of a solid or

drywall construction• For a screed of 0 - 200 mm (not in room height applications)• For disabled WC installations• For connecting Geberit AquaClean

Characteristics

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• Tool-free fastening for outlet bend, sound-absorbing, adjustable in


plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • The protection cover protects the service opening against moisture

and dirt • Not suitable for use with flush buttons• Protection cover for service opening can be mounted without tools


mounted and operated without tools• Self-locking feet for tool-free alignment of the element. (Friction feet


111.847.00.1)• Adjustable installation height of the WC, 410 - 460 mm• Flush valve features settings to enable either a 6l and 3l flush or a 4.5l


Product Details

Additional NoteWater supply connection R 1/2" with integrated angle stop valve and hand wheel; Conduit pipe for the water supply connection of Geberit AquaClean; Flush bend; Protection plug; Protection housing for service opening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; 2 threaded rods M12 for ceramics fastening; Fastening material



Duofix frame for support handles

Application

• For installation of grab rails• For a screed of 0 - 200 mm• For installation in a room-height Duofix system wall in front of a solid or

drywall construction• For installation in a room-high Duofix system wall• For mounting in front of a solid or drywall construction (order PreWall

brackets 111.844.00.1 separately)• For installation in a load bearing stud work

Characteristics

• Frame height 1120 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Fastening plate for support handles made from veneer wood, water-

resistant laminate, adjustable height and depth• Self-locking feet for tool-free alignment of the element. (Friction feet

have to be locked with spanner)

Additional NoteFastening material


73

300300

R½

1000

230-280

0 30

0-200

180/230 1045-1055

425

1120

130

0

1000-1010

410-460

170 45

48

90-135

2010





Article no. PU1 PU4

111.352.00.5 1 8

Article no. PU1 PU4

111.790.00.1 1 10

50112

365

100

0-20

0

73

85

0

4

48

Product GuideConcealed cisterns


Sound insulation

Application

• For wall-hung WC and wall-hung bidet• For sanitaryware with fixing centres 180 mm or 230 mm• For decoupling solid-borne noise with WC and bidet• Insulation to be trimmed after pan fixed

Characteristics

• White

Product Details

Additional Note2 acoustic insulation sleeves


Concealed cisterns

Concealed dual flush cistern UP320 for Sigma flush plates

Application

• For concealed installation• For back to wall floor-standing WCs

Characteristics

• Concealed cistern fully insulated against condensation• Front actuation only• Protection cover for service opening can be mounted without tools

and cut to length• Dual flush with Sigma60, Sigma50, Sigma20, Samba or Bolero flush

plates • Dual flush with dual flush HyTouch pneumatic and mechanical buttons• Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Single flush with HyTronic infra-red flush or HyTouch pneumatic

buttons• Flushing unit for dual flush and single flush• Adjustable flushing volume• Water supply connection at centre back or at the top• Flush bend has maximum 8 cm adjustment. Flush can be cut down by

maximum of 8 cm • Installation height 1080 mm (can be cut down, depending on the WC

pan performance)• Installation depth adjustable, 160 - 205 mm• Fastening bracket adjustable in depth• Cistern can be reversed to give access from behind in a duct situation

when flushed with HyTouch pneumatic buttons or HyTronic sensor flush

• Flush valve features 6l and 4.5l flush settings to enable either a 6l and 3l flush or a 4.5l and 3l flush. For flush volumes of 4l and 2l a low flush beaker is required (241.894.00.1)

Product Details

Additional NoteWater supply connection R 1/2" with integrated angle stop valve; Protection housing for service opening; Flush pipe ø 45 mm; Fastening for flush bend; Protection plug for flush pipe; 2 slotted flat irons; 2 fastening brackets, pre-mounted; Fastening material



Product material PE expanded

Material thickness 6 mm

Article no. PU1 PU2 PU4

156.050.00.1 1 10 200

Concealed cisterns





Article no. PU1 PU4

109.309.00.5 1 20

41

108

51

1045

235

23

100

R1/2

57

30

135

0

365

845

0

100

12 2-9

16-205



Concealed dual flush cistern UP720 for Sigma flush plates

Application

• For solid construction• For floor standing WC• For concealed installation

Characteristics

• Concealed cistern fully insulated against condensation• Geberit Sigma concealed cistern 8 cm (UP720), front actuation• Concealed cistern for simple installation and tool-free repair works• Protection cover for service opening can be mounted without tools


mounted and operated without tools• Connection hose to angle stop valve can be screwed without tools• Dual flush with Sigma60, Sigma50, Sigma20, Samba or Bolero flush

plates • Stop-and-go flush with Rumba, Mambo or Tango actuator plate• Single flush with Sigma10 actuator plate • Flush bend has maximum 8 cm adjustment. Flush can be cut down by

maximum of 8 cm • Adjustable flushing volume• Water supply connection at the top, offset to the left side• Flush bend adjustable, 2 cm upwards and 1 cm downwards

Product Details

Additional NoteWater supply connection R 1/2" with integrated angle stop valve and hand wheel; Flush bend; Protection housing for service opening; Fastening material; Protection plug for flush bend



Concealed dual flush cistern UP200 for Kappa flush plates

Application


Characteristics

• Front or top actuation• Installation depth adjustable 18 cm - 24.5 cm• Fully insulated against condensation• Water supply connection left• Dual flush with flush plates Artline or Kappa flush plates• Dual flush with dual flush HyTouch pneumatic and mechanical buttons• Single flush with HyTouch single flush pneumatic buttons• Connection hose to angle stop valve can be screw-connected by

hand• Flush bend, welded• Fast adjustment of the actuator rods for flush plate• Cistern height 82 cm• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual


Product Details

Additional NoteWater supply connection R 1/2" with integrated angle stop valve; Protection housing for service opening; Protection plug for flush bend; Fastening for flush bend; 2 fastening brackets, pre-mounted; Fastening material






Flush volume large range 6 / 9 l

Flush volume small 3 l

Article no. PU1 PU4 Price£

109.772.00.1 1 32 145.00

0

R1/2

8

505

57

65–80

87

X

110

-15

≥ 30

8 1–5

110

0

87

-15





Article no. PU1 PU4

109.200.00.1 1 27

X

465

57

13

335465

0

9

18

min.3

0

max.9

25

max.9



Concealed dual flush cistern UP200 for Kappa flush plates with extended flush pipe New

Application

• For floor-standing and wall-hung WCs• For private and semi-public areas• For concealed installation

Characteristics

• Front or top actuation• Installation depth adjustable 18 cm - 24.5 cm• Protection housing for service opening, can be cut to length• Fully insulated against condensation• Water supply connection left• Dual flush with flush plates Artline or Kappa flush plates• Dual flush with dual flush HyTouch pneumatic and mechanical buttons• Single flush with HyTouch single flush pneumatic buttons• Connection hose to angle stop valve can be screw-connected by

hand• Flush bend, welded• Connection hose to angle stop valve can be screw-connected by

hand• Fast adjustment of the actuator rods for flush plate• Cistern height 98 cm• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual


Product Details

Additional NoteWater supply connection R 1/2" with integrated angle stop valve; Protection housing for service opening; Protection plug for flush bend; WC connection set, ø 90 mm; 2 fastening brackets, pre-mounted; Fastening material



Concealed single flush cistern AP123

Application


Characteristics

• Fully insulated against condensation• Impuls380 side filling valve• Cover without button• Water supply connection left and right• Flush pipe connection fitted• Single flush with HyTouch single flush pneumatic buttons• 300 mm extention pipe available (118.131.11.1)

Product Details

Additional NoteFlush bend 39 x 35 cm, ø 50/44 mm; Pneumatic actuation unit; Fastening material

Excluded: Angle stop valve R 1/2"; Pneumatic push button






Article no. PU1

109.211.00.1 1

X

465

57

13

465

595

0

9

18

min.3

0

max.9

25

max.9

Fill time (6 l) at 3 bar flow pressure 30 s

Fill time (9 l) at 3 bar flow pressure 45 s

Flush volume range 6 / 9 l

Drainage capacity 2.2–2.9 l/s

Flush volume factory setting 9 l

Article no. Colour PU1 PU4

123.137.11.1 White 1 24

305–3

41

33

3838

128

45

65

65



Pneumatic operated concealed dual flush cistern for low height furniture

Application

• For installation in low height bathroom furniture (minimum height 790 mm from finished floor)

• For back to wall floor-standing WCs

Characteristics

• Pneumatic flush actuation• Water supply connection at the bottom left• Top or front access• Includes dual flush pneumatic button

Product Details

Additional NoteDual flush actuator; Flush bend; Sleeve; Fastening material


Monolith for wall mounted WC, glass

Application

• For wall mounted WC with 240 - 260 mm wall drainage outlet (for further drainage outlet options please see accessories on page 66)

• For use in wall outlet connections, outlet height in excess of 230 mm• For mounting on finished floors• Requires Monolith feet if installing onto a low weight bearing or dry

wall installation (131.104.00.1) - see page 60• For installation as part of renovation work, design or new build• Not suitable for Geberit AquaClean - see page 13

Characteristics

• Includes a Duofix frame PreWall mounted• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right• Front panel made of 8 mm glass• Brushed and anodised aluminium side profiles• Side base pods can be adjusted to skirting board

Product Details

Additional NoteCistern element with front and side cladding; Water supply connection set with angle stop valve; Flush pipe 230 x 230 mm, ø 50 / 44 mm; WC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; 2 threaded rods M12 for ceramics fastening; Fastening material for solid wall; Fastening material for wall-hung WC





Article no. PU1 PU4

109.720.00.1 1 24

30

464

355

45

94

98 8

15

8

R1/2

132

65 29

75-16

9

M64x2




Flush volume large range 4.5 / 6 l


131.021.SI.1 White glass / aluminium 1 6

131.021.SJ.1 Black glass / aluminium 1 6

131.021.SK.1 NEW Mint glass / white aluminium 1 6

0

908

485

R½

101

18/23

25

47 413 4 13 4

106

43

0



Monolith for floor mounted WC, glass

Application

• For close coupled WC with 150 mm floor drainage outlet (for further drainage outlet options please see accessories on page 66)

• For use in floor outlet connections• For use in wall outlet connections, outlet height 180 mm (requires

131.083.16.1)• For mounting on finished floors• For installation as part of renovation work, design or new build

Characteristics

• Includes a Duofix frame PreWall mounted• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Integrated dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right• Front panel made of 8 mm glass• Brushed and anodised aluminium side profiles• Side base pods can be adjusted to skirting board

Product Details

Additional NoteCistern element with front and side cladding; Water supply connection set with angle stop valve; Flush pipe 230 x 230 mm, ø 50 / 44 mm; P-bend, PP, ø 90 mm ; Adaptor sleeve, HDPE, ø 90/110 mm; Fastening material for solid wall; Rubber seal EPDM


Monolith for Geberit AquaClean

Application

• For wall mounted WC with 240 - 260 mm wall drainage outlet (for further drainage outlet options please see accessories on page 66)

• For use in wall outlet connections, outlet height in excess of 230 mm• For mounting on finished floors• Requires Monolith feet if installing onto a low weight bearing or dry

wall installation (131.104.00.1) - see page 60• For installation as part of renovation work, design or new build• For connecting Geberit AquaClean WC

Characteristics

• Includes a Duofix frame PreWall mounted• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right• Front panel made of 8 mm glass• Brushed and anodised aluminium side profiles• Side base pods can be adjusted to skirting board

Product Details

Additional NoteCistern element with front and side cladding; Water supply connection set with angle stop valve; Flush pipe 230 x 230 mm, ø 50 / 44 mm; WC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; 2 threaded rods M12 for ceramics fastening; Acoustic insulation set; Fastening material for solid wall; Fastening material for wall-hung WC









131.002.SK.1 NEW Mint glass / white aluminium 1 6

0

908

485R½

1010

180 10

10

106

0








0

908

485

R½

10118/2318/23

25

15

28

106

455

25

0


Product GuideWC flush plates

WC flush plates

Sigma10 single flush plate for UP320 and UP720

Application

• For Geberit concealed cistern UP300, UP320 and UP720• For single flush• Not suitable for UP200, Twinline and Artline cisterns

Product Details

Additional NoteMounting frame; Push rod; Distance bolts


Sigma20 dual flush plate for UP320 and UP720

Application

• For Geberit concealed cistern UP300, UP320 and UP720• For dual flush• Not suitable for UP200, Twinline and Artline cisterns

Product Details

Additional NoteMounting frame; Distance bolts; Actuator rods


Sigma50 dual flush plate for UP320 and UP720 - Bespoke cover

Application

• For Geberit concealed cistern UP300, UP320 and UP720• For dual flush• For customer to install a bespoke finish with max. of 3 mm depth• Not suitable for UP200, Twinline and Artline cisterns

Product Details


Excluded: Design cover


Sigma50 dual flush plate for UP320 and UP720 - Glass cover

Application


Product Details



WC flush plates

Actuation force < 20 N

Product material Plastic

Article no. Colour PU1 PU2 PU4

115.758.KJ.1 White / gloss chrome / white 1 10 180

115.758.KK.1 White / gold-plated / white 1 10 180

115.758.KL.1White / matt chrome / matt chrome

1 10 180

115.758.KM.1 Black / gloss chrome / black 1 10 180

115.758.KH.1Gloss chrome / matt chrome / gloss chrome

1 10 180

115.758.KN.1Matt chrome / gloss chrome / matt chrome

1 10 180




115.778.KJ.1 White / gloss chrome / white 1 10 180

115.778.KK.1 White / gold-plated / white 1 10 180

115.778.KL.1 White / matt chrome / matt chrome 1 10 180

115.778.KM.1 Black / gloss chrome / black 1 10 180

115.778.KH.1Gloss chrome / matt chrome / gloss chrome

1 10 180

115.778.KN.1Matt chrome / gloss chrome / matt chrome

1 10 180

164

246 11

164

246 11


Product material Die-cast zinc

Article no. PU1 PU2

115.788.00.1 1 5


Product material Die-cast zinc / glass


115.788.SC.1 White with ornament x 1 5

115.788.SE.1 Green satinised 1 5

115.788.SD.1 Smoked glass reflective 1 5

164

246 14

164

246 14



Sigma50 dual flush plate for UP320 and UP720 - Plastic cover

Application


Product Details



Sigma50 dual flush plate for UP320 and UP720 - Brushed stainless steel

Application

• For dual flush• For Geberit concealed cistern UP300, UP320 and UP720• For front actuation• For use with Geberit Sigma concealed cistern 8 cm (UP720 and

UP700)• Not suitable for UP200, Twinline and Artline cisterns

Product Details

Additional NoteMounting frame; Distance bolts; Actuator rods; Fastening material


Sigma50 dual flush plate for UP320 and UP720, Anti Vandal - Brushed stainless steel

Application

• For installation in vandal resistant systems• For Geberit concealed cistern UP300, UP320 and UP720• For dual flush• Not suitable for UP200, Twinline and Artline cisterns

Characteristics

• Can be locked with screws

Product Details



Sigma50 dual flush plate for UP320 and UP720, Anti Vandal - Bespoke cover

Application

• For Geberit concealed cistern UP300, UP320 and UP720• For dual flush• For installation in vandal resistant systems• For customer to install a bespoke finish with max. of 3 mm depth• Not suitable for UP200, Twinline and Artline cisterns

Characteristics


Product Details




Product material Die-cast zinc / plastic


115.788.DW.1 Black RAL 9005 1 5

115.788.11.1 White 1 5

115.788.EP.1 Pergamon 1 5


Product material Brass / chrome-plated die-cast zinc


115.788.GH.1 Brushed stainless steel 1 5

164

246 14

164

246 14


Product material Brass / chrome-plated die-cast zinc


115.785.GH.1 Brushed stainless steel 1 5


Article no. PU1 PU2

115.785.00.1 1 5

164

246 14

164

246 14



Sigma50 dual flush plate for UP320 and UP720, Anti Vandal - Glass cover

Application


Characteristics


Product Details



Sigma50 dual flush plate for UP320 and UP720, Anti Vandal - Plastic cover

Application

• For Geberit concealed cistern UP300, UP320 and UP720• For dual flush• For Geberit concealed cistern UP300• Not suitable for UP200, Twinline and Artline cisterns

Characteristics


Product Details



Sigma60 dual flush plate for UP320 and UP720, Brushed chrome New

Application

• For dual flush• For Geberit concealed cistern UP320 and UP720• For front actuation• For use with plaster boarding/panelling 18 - 60 mm • Not suitable for use with UP300 and UP700 concealed cisterns

Characteristics

• Surface even actuation• For use with tiles 6–18 mm• Sound-absorbing actuator rods, tool-free, fast adjustment

Product Details


Sigma60 cover frame, Brushed chrome New

Application

• For use with Geberit Sigma60 flush plate

Product Details



Product material Die-cast zinc / glass


115.785.SC.1 White with ornament x 1 5

115.785.SD.1 Smoked glass reflective 1 5

115.785.SE.1 Green glass satinised 1 5


Product material Die-cast zinc / plastic


115.785.11.1 White alpine 1 5

115.785.DW.1 Black RAL 9005 1 5

115.785.EP.1 Pergamon 1 5

164

246 14

164

246 14


Article no. PU1

115.792.GH.1 1


Article no. PU1

242.544.GH.1 1

139

221 18−6 06−18

15

246

164

06



Insert for in-cistern blocks for Sigma10, 20 and 50 flush plates for UP320

Application

• For Geberit concealed cistern UP300 and UP320• For front actuation• For adding in-cistern blocks without chlorine or oxidising components• Not suitable for UP720, UP200, Twinline and Artline cisterns• Not suitable for use with the following flush plates: Sigma60, Samba,

Bolero, Rumba, Tango, Mambo, Twist

Additional NoteCover; Receptacle for in-cistern blocks; Mounting frame with swivelling mechanism


Samba dual flush plate for UP320 and UP720

Application


Product Details

Additional NotePush rods; Distance rods; Fastening material


Bolero dual flush plate for UP320 and UP720

Application


Product Details



Article no. PU1 PU2

115.612.00.1 1 5




115.770.10.1 Bahama beige 1 10 180

115.770.11.1 White 1 10 180

115.770.21.1 Gloss chrome 1 10 180

115.770.46.1 Matt chrome 1 10 180

115.770.CG.1 Manhattan 1 10 180

115.770.DK.1 Edelweiss 1 10 180

115.770.DT.1 Fine brass 1 10

115.770.DW.1 Black RAL 9005 1 10 180

115.770.EP.1 Pergamon 1 10 180

115.770.FB.1 Agais 1 10

115.770.FR.1 Star white 1 10 180

115.770.GM.1 Satinox 1 10 180

115.770.KB.1 Gloss chrome / structured chrome 1 10 180

1-95

164

246 15




115.777.10.1 Bahama beige 1 10

115.777.11.1 White 1 10 180

115.777.21.1 Gloss chrome 1 10 180

115.777.46.1 Matt chrome 1 10 180

115.777.CG.1 Manhattan 1 10

115.777.DK.1 Edelweiss 1 10

115.777.DT.1 Fine brass 1 10

115.777.DW.1 Black RAL 9005 1 10

115.777.EP.1 Pergamon 1 10 180

115.777.FB.1 Agais 1 10

115.777.FR.1 Star white 1 10

115.777.GM.1 Satinox 1 10

115.777.KB.1 Gloss chrome / structured chrome 1 10 180

164

246 14



Tango single flush plate for UP320 and UP720, Anti Vandal

Application


Characteristics

• Can be locked with anti-vandal screws

Product Details

Additional NotePush rod; Distance rods; Fastening material


Rumba single flush plate for UP320 and UP720

Application


Product Details



Mambo single flush plate for UP320 and UP720, Anti Vandal

Application


Characteristics


Product Details



Artline dual flush plate for UP200

Application

• For Geberit concealed cisterns UP200 and Artline• For top or front actuation• For dual flush• Not suitable for UP720, UP300, UP320 and Twinline cisterns

Product Details






115.760.11.1 White 1 10 180

115.760.21.1 Gloss chrome 1 10 180

115.760.45.1 Gold-plated 1 10

115.760.46.1 Matt chrome 1 10 180

115.760.DT.1 Fine brass 1 10

115.760.GM.1 Satinox 1 10

115.760.HC.1 Palladium 1 10

115.760.KA.1Gloss chrome / matt chrome

1 10




115.750.11.1 White 1 10 180

115.750.21.1 Gloss chrome 1 10 180

115.750.46.1 Matt chrome 1 10 180

115.750.KB.1Gloss chrome / structured chrome

1 10

164

2461

164

246

15


Product material Stainless steel


115.751.00.1 1 10 180




115.666.11.1 White 1 10 200

115.666.21.1 Gloss chrome 1 10 200

115.666.46.1 Matt chrome 1 10 200

164

246 25

142

213

16



Kappa20 dual flush plate for UP200

Application


Product Details




Application

• For Geberit concealed cistern UP200• For top or front actuation• For dual flush• Not suitable for UP720, UP300, UP320 and Twinline cisterns

Product Details

Additional NoteMounting frame; Actuator rods; Distance bolts; Fastening material



Application


Product Details



Small access/cover plate for UP200

Application

• For Geberit concealed cisterns UP200 and Artline• Not suitable for UP720, UP300, UP320 and Twinline cisterns

Product Details

Additional NoteDistance rods; Fastening material





115.228.10.1 Bahama beige 1 10

115.228.11.1 White 1 10 200

115.228.21.1 Gloss chrome 1 10 200

115.228.46.1 Matt chrome 1 10 200

115.228.CG.1 Manhattan 1 10

115.228.DK.1 Edelweiss 1 10

115.228.DT.1 Fine brass 1 10

115.228.DW.1 Black RAL 9005 1 10

115.228.EP.1 Pergamon 1 10 200

115.228.FB.1 Agais 1 10

115.228.FR.1 Star white 1 10

115.228.GM.1 Satinox 1 10

115.228.KB.1 Gloss chrome / structured chrome 1 10



Article no. Colour

115.240.KJ.1 White / gloss chrome / white

115.240.KH.1 Gloss chrome / matt chrome / gloss chrome

115.240.KM.1 Black / gloss chrome / black

115.240.KK.1 White / gold-plated / white

115.240.KL.1 White / matt chrome / matt chrome

115.240.KN.1 Matt chrome / gloss chrome / matt chrome

142

213 16

142

212 14




115.260.11.1 White 1 10 180

115.260.21.1 Gloss chrome 1 10 180

115.260.46.1 Matt chrome 1 10 180

115.260.HC.1 Palladium 1 10

115.258.00.1 Stainless steel 1 10


Article no. Colour PU1

115.680.11.1 White 1

115.680.21.1 Gloss chrome 1

211

142

15

142

213



Large access/cover plate for UP320 and UP720

Application

• For Geberit concealed cistern UP300, UP320 and UP720• Not suitable for UP200, Twinline and Artline cisterns

Characteristics


Product Details



Large access/cover plate for UP320 and UP720

Application

• For Geberit concealed cistern UP300, UP320 and UP720• Not suitable for UP200, Twinline and Artline cisterns

Characteristics


Product Details



Extension set for flush plates

Application

• For Geberit concealed cistern UP300, UP320 and UP720• For extending flush plates up to an outer wall of max. 180 mm• For Sigma10, Sigma20, Sigma50, Rumba, Samba, Bolero, Tango,

Twist, Mambo and Kappa flush plates• For Artline flush plates with UP200 cistern• Not suitable for Artline plates with Artline cistern

Additional Note2 extensions for push rods; 2 extensions for distance rods; Fastening material




115.765.46.1 Matt chrome 1 10 180



115.798.00.1 1 10 180

164

246

164

246

Article no. PU1 PU2

240.938.00.1 1 10

Product GuideRemote flushing kits


Remote flushing kits

HyTouch pneumatic short wall palm push button plastic with actuator

Application

• For pneumatic remote flush actuation of Geberit concealed cisterns UP200, UP300, UP320, Artline and Twinline

• For single flush• For wall thicknesses of 17 - 25 mm• Not suitable for UP720, AP123 or low height cisterns

Characteristics

• Round design• 53 mm hole required

Product Details

Additional NotePneumatic flush button with bellows; Pneumatic actuation unit; 2 m air hose


HyTouch pneumatic short wall palm push button plastic without actuator

Application

• For pneumatic remote flush actuation of Geberit concealed cistern AP123

• For single flush• For wall thicknesses of 17 - 25 mm• Not suitable for UP200, UP720, UP300, UP320, Artline and Twinline

cisterns

Characteristics


Product Details

Additional NotePneumatic flush button with bellows


HyTouch pneumatic short wall finger push button metal with actuator

Application


• For single flush• For wall thicknesses of 0 - 30 mm• 50 mm hole required• Not suitable for UP720, AP123 or low height cisterns

Product Details



HyTouch pneumatic short wall finger push button metal without actuator

Application


• For single flush• For wall thicknesses of 0 - 30 mm• 50 mm hole required• Not suitable for UP200, UP720, UP300, UP320, Artline and Twinline

cisterns

Product Details



Remote flushing kits



115.114.11.1 White 1 10 240

115.114.21.1 Gloss chrome 1 10 240



241.199.11.1 White 1 10 100

241.199.21.1 Gloss chrome 1 10 100

6

17-25

62 52

43

6

17-25

62 52

43



115.947.00.1 1 12

115.947.21.1 Gloss chrome 1 12 360



241.198.21.1 Gloss chrome 1 12

241.198.00.1 1

122

0 - 30

63

63

122

0 - 30



HyTouch pneumatic short wall palm push button metal with actuator

Application


• For single flush• For wall thicknesses of 0 - 30 mm• 50 mm hole required• Not suitable for UP720, AP123 or low height cisterns

Product Details



HyTouch pneumatic short wall palm push button metal without actuator

Application



cisterns

Product Details



HyTouch pneumatic long wall push button metal - single flush

Application



cisterns

Product Details

Additional NotePneumatic flush button with bellows and sleve


HyTouch pneumatic long wall push button metal - single flush

Application

• For pneumatic remote flush actuation of Geberit concealed cisterns AP123, UP200, UP300, UP320, Artline and Twinline

• For single flush• For wall thicknesses of 60 - 270 mm• Not suitable for UP720

Characteristics


Product Details

Additional NotePneumatic actuation unit; 2 m air hose




115.949.21.1 Gloss chrome 1 12




63

122

0 - 30

63

122

0 - 30


Article no. PU1 PU2

241.144.00.1 1 8



115.943.21.1 Gloss chrome 1 10 120

63

264

0 - 170

37

6-27



HyTouch pneumatic hand push button - single flush

Application

• For pneumatic remote single flush actuation of Geberit concealed cisterns UP200, UP300, UP320, AP123, Artline and Twinline

• For single flush• Not suitable for UP720

Characteristics

• Square design

Product Details

Additional NoteConduit pipe, 1.7 m; 2 m air hose; Concealed housing; Pneumatic actuator; Protection housing; Fastening material


HyTouch pneumatic hand push button - dual flush

Application


• For dual flush• Not suitable for UP720, AP123 or low height cisterns

Characteristics

• Square design

Product Details

Additional NoteConduit pipe, 1.7 m; 2 m air hose; Concealed housing; Pneumatic actuator; Protection housing; Fastening material


HyTouch pneumatic finger push button - dual flush

Application


• For dual flush• 65 mm hole required• Not suitable for UP720 and AP123

Characteristics

• Round design

Product Details

Additional NotePneumatic actuation unit; 2 m air hose


HyTouch mechanical finger push button - dual flush, plastic New

Application

• For drywall construction• For Geberit concealed cistern UP200• For dual flush• Not suitable for UP300, UP320, UP720, Twinline, AP123 or furniture

cisterns

Characteristics

• Flush actuation using cable actuator• Actuator made of plastic• Fastening for actuator on the back with counter nut• Length of the cable actuator cannot be changed• 45 mm hole required

Product Details

Additional NoteDual flush actuator with cable actuators; Lifter for installation on flush valve; Protective pipe; Counter nut with extension; Fastening material




115.941.11.1 White 1 10 120

115.941.KA.1 Gloss chrome / matt chrome 1 10 120



115.942.11.1 White 1 10 120

115.942.KA.1 Gloss chrome / matt chrome 1 10 120

108

108

108

108



115.999.21.1 Gloss chrome 1 10 240


Article no. PU1 PU2

115.075.21.1 1 10

8

8 9

M64x2

min. 15- max. 18

Ø 65 ø 45

85

52

13

035



HyTouch mechanical finger push button - dual flush, metal New

Application

• For drywall construction• For Geberit concealed cistern UP200• For dual flush• Not suitable for UP300, UP320, UP720, Twinline, AP123 or furniture

cisterns

Characteristics

• Flush actuation using cable actuator• Actuator made of die-cast zinc• Fastening for actuator on the back with counter nut• Length of the cable actuator cannot be changed• 45 mm hole required

Product Details

Additional NoteDual flush actuator with cable actuators; Lifter for installation on flush valve; Protective pipe; Counter nut with extension; Fastening material


HyTouch pneumatic foot operated flush - wall mounted

Application

• For pneumatic remote single flush actuation of Geberit concealed cisterns UP200, UP300, UP320, AP123, low height cistern, Artline and Twinline

• For single flush• For installation in floor• Not suitable for UP720

Product Details

Additional NoteConduit pipe, 3 m; Pneumatic hose, 3.5 m; Pneumatic actuation unit; Fastening material


HyTouch pneumatic foot operated flush - floor mounted

Application

• For pneumatic remote single flush actuation of Geberit concealed cisterns UP200, UP300, UP320, AP123, low height cistern, Artline and Twinline

• For single flush• For solid construction• For installation in floor• For drywall construction• For pneumatic remote control flush actuation of Geberit surface-

mounted and concealed cisterns• Not suitable for UP720

Product Details

Additional NoteConduit pipe, 3 m; Pneumatic hose, 3.5 m; Pneumatic actuation unit; Protection box made of EPS; Fastening material



Article no. PU1 PU2

115.075.21.Z 1 10



115.918.00.1 1 10 120

Ø 65 ø 45

85

52

13

035

11

154



115.939.00.1 1 10 120

33

12

12



HyTronic automatic infra-red WC flush for UP720, mains power New

Application

• For use with UP720 concealed cistern• For use with the Mambo IRBA flush plate• Not suitable for barrier-free and wheelchair-suitable construction• Not suitable for UP300, UP320, UP200, Artline, Twinline, AP123 or

low height furniture cisterns

Characteristics

• Infra-red user detection• Self-calibrating infra-red control• Infra-red detection with background fade-out• Driven by servo motor• Operation with extra-low voltage – no mains voltage in the cistern• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Automatic flush release• Manual, touchless flush release• Manual flush actuation using flush plate• Triggers a full flush• Minimum detection time can be set• Initial flush can be set• Repeat flush can be set• Flush actuator made of stainless steel, can be connected with anti-

vandal screws• Flush actuation can be deactivated using HyTronic Clean Handy• Flush actuation settings can be made and checked, using HyTronic

Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing• Requires transformer 115.861.00.1

Product Details

Additional NoteActuator plate Mambo IRBA with infra-red window, stainless steel; Mounting frame with infra-red control, pre-mounted; Cradle with servo motor and lifting device, pre-mounted; Push rod; Distance rods; Fastening material

Excluded: Power supply unit


HyTronic automatic infra-red WC flush for UP320, mains power

Application

• For use with Geberit UP300 and UP320 concealed cistern• For use with the Mambo IRBA flush plate• Not suitable for barrier-free and wheelchair-suitable construction• Not suitable for UP200, UP720 Artline, Twinline, AP123 or low height

furniture cisterns

Characteristics



Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing• Requires transformer 115.861.00.1

Product Details

Additional NoteActuator plate Mambo IRBA with infra-red window, stainless steel; Mounting frame with infra-red control, pre-mounted; Cradle with servo motor and lifting device, pre-mounted; Cover; Push rod; Distance rods; Fastening material



Interval flush adjustment range 1–168 h

Interval flush factory setting 24 h

Activation time 7 s

Activation time range 1–60 s

Operating voltage 4.1 V DC

Nominal voltage 230 V AC

Mains frequency 50 Hz

Protection degree IP 45

Article no. PU1

115.855.00.1 1



Activation time 7 s






Article no. PU1

115.890.00.1 1



HyTronic automatic infra-red WC flush for UP320, battery powered

Application

• For use with Geberit UP300 and UP320 concealed cistern• For use with the Mambo IRBA flush plate• Not suitable for barrier-free and wheelchair-suitable construction• Not suitable for UP200, UP720 Artline, Twinline, AP123 or low height

furniture cisterns

Characteristics



Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing

Product Details

Additional NoteActuator plate Mambo IRBA with infra-red window, stainless steel; Mounting frame with infra-red control and battery compartment, pre-mounted; Cradle with servo motor and lifting device, pre-mounted; 2 batteries, each 1.5 V LR20 alkaline; Cover; Push rod; Distance rods; Fastening material


HyTronic infra-red sensor flush

Application

• For automatic flush actuator of UP300 and UP320 concealed cistern• For single flush• Not suitable for UP200, UP720, Twinline, AP123, low height cisterns

and Artline cisterns

Product Details

Additional NotePower supply unit; Installation phase box for power supply unit; Electrical lifting device for flush valve with control electronics




Activation time 7 s


Operating voltage 3 V DC

Battery type LR20

Article no. PU1

115.891.00.1 1





115.857.00.1 Stainless steel 1


0008

NA4V1_V0.1

20.6.02

43

33

0 - 30

Product GuideDuofix basin frames


Duofix basin frames

Duofix basin frame 1.12 m

Application

• For installation of a wall-hung washbasin with bolt fixings set at between 50 and 380 mm centres (with accessories 111.868.00.1 fastening distance can extend from 380 - 580 mm)

• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm

Characteristics

• Frame height 1120 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Washbasin fastening distance 50 - 380 mm• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Tap connection plate with adjustable height and depth• Fastening for outlet bend, adjustable height• With wall brackets to allow up to a 200 mm duct. For larger ducts up

to 400 mm use extension bolts 111.887.00.1• With backplate elbows and chrome isolating valves with 3/8" BSP

connection

Additional Note2 water connections R 1/2"; 2 angle stop valves R 1/2"; 2 Duofix PreWall brackets for system; 2 threaded rods M10 for ceramics fastening; Fastening material


Duofix basin frame 0.82 / 0.98 m

Application


• For installation of a wall-hung washbasin with bolt fixings set at between 50 and 380 mm centres (with accessories 111.868.00.1 fastening distance can extend from 38 - 58 cm)

• For a screed of 0 - 200 mm

Characteristics

• Frame height 820 / 980 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Washbasin fastening distance 50 - 380 mm• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Tap connection plate with adjustable height and depth• Fastening for outlet bend, adjustable height• With wall brackets to allow up to a 200 mm duct. For larger ducts up


connection



Duofix basin frames

Article no. PU1

111.495.00.1 1

80

52

112

76

50

100

0-20

0

5-38

73

306

153

7

48

85

0

6

Article no. PU1

111.494.00.1 1

52

80

98(82)

76

50

0-20

0

5-38

73

306

153

7

48

6

85

0


Product GuideTaps

Duofix basin frame 1.12 - 1.3 m for wall mounted taps

Application

• For installation of a wall-hung washbasin with bolt fixings set at between 50 and 380 mm centres (with accessories 111.868.00.1 fastening distance can extend from 380 - 580 mm)

• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm• For washbasin with concealed wall-mounted tap• Disc for mounting the concealed wall-mounted tap

Characteristics

• Frame height 1120 mm to 1300 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Washbasin fastening distance 50 - 380 mm• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Fastening for outlet bend, adjustable height• Fastening plate for concealed fittings, veneered wood, waterproof

bonded, adjustable in height and depth• Self-locking feet for tool-free alignment of the element. (Friction feet

have to be locked with spanner)

Additional NoteOutlet bend ø 50 mm; Seal ø 44/32 mm; 2 threaded rods M10 for ceramics fastening; Fastening material


Sound dampening set for washbasin

Application

• For solid-borne noise insulation with washbasins

Product Details

Additional Note2 acoustic insulation sleeves


Taps

HyTronic60 infra-red sensor tap without mixer, mains powered

Application

• For cold or mixed water connection• For installation in washbasin or work top

Characteristics

• Electrical power supply via power supply unit• Volume flow control with aerator• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Requires transformer 241.692.00.1

Product Details

Additional NoteConnection cable 1.7 m for power supply unit; Metal-reinforced hose R 3/8"; Filter; Fastening material



Article no. PU1 PU4

111.493.00.1 1 10

Product material PE expanded

Article no. PU1

156.051.00.1 1

50

0-20

0

73

80

52

112-130

5-38

48

85

0

11

60

20

05

Taps

Max. operating temperature mixed water 45 °C

Maximum operating temperature, short-term 90 °C

Product material Chrome-plated brass

Activation distance factory setting 22 cm

Activation distance adjustment range 5–22 cm

Operating pressure 1–8 bar

Ambient temperature 1–40 °C

Flow rate at 3 bar 6 l/min





115.740.21.1 Gloss chrome 1 62

135

122

193

05-3

36 SW36

SW19

35

56

G 3/8

22

Product GuideTaps


HyTronic60 infra-red sensor tap without mixer, battery powered

Application

• For cold or mixed water connection• For installation in washbasin or work top

Characteristics


Product Details

Additional Note6 V battery; Metal-reinforced hose R 3/8"; Filter; Fastening material


HyTronic60 infra-red sensor tap with mixing lever, mains powered

Application

• For cold and hot water connection• For installation in washbasin or work top

Characteristics


Product Details

Additional NoteConnection cable 1.7 m for power supply unit; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material












Battery type CR - P2 (6 V)


115.733.21.1 Gloss chrome 1 62

135

122

193

05-3

36 SW36

SW19

35

56

G 3/8

22

Differentiated pressure CW/WW ≤ 1.5 bar













115.738.21.1 Gloss chrome 1 62

135

122

193

05-3

36 SW36

SW19

35

56

G 3/8

22


Product GuideTaps

HyTronic60 infra-red sensor tap with mixing lever, battery powered

Application

• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top

Characteristics

• Power supply by battery• Temperature adjustment via the mixer lever• Volume flow control with aerator• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy

Product Details

Additional Note6 V battery; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material; Key for aerator


HyTronic60 infra-red sensor tap with internal mixing, mains powered

Application


Characteristics

• Electrical power supply via power supply unit• Temperature pre-setting via the internal mixer• Volume flow control with aerator• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Requires transformer 241.692.00.1

Product Details

Additional NoteConnection cable 1.7 m for power supply unit; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material















115.723.21.1 Gloss chrome 1 62

135

122

193

05-3

36 SW36

SW19

35

56

G 3/8

22














115.739.21.1 Gloss chrome 1 62

135

122

193

05-3

36 SW36

SW19

35

56

G 3/8

22

Product GuideTaps


HyTronic60 infra-red sensor tap with internal mixing, battery powered

Application


Characteristics

• Power supply by battery• Temperature pre-setting via the internal mixer• Volume flow control with aerator• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy

Product Details

Additional Note6 V battery; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material; Key for aerator


Transformer for HyTronic60 tap

Application

• For concealed installation• For parallel connection of up to six Geberit washbasin taps with infra-

red control

Product Details














115.725.21.1 Gloss chrome 1 62

135

122

193

05-3

36 SW36

SW19

35

56

G 3/8

22 Nominal voltage 230 V AC


Output voltage 9 V DC

Article no. PU1

241.692.00.1 1

55

55


Product GuideTaps


Application

• For cold or mixed water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top

Characteristics

• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1

Product Details

Additional NoteMetal-reinforced hose R 3/8"; Filter; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material



Application


Characteristics

• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set

Product Details

Additional NoteMetal-reinforced hose R 3/8"; Filter; 6 V battery; Key for aerator; Fastening material



Activation distance factory setting 16–18 cm



Operating pressure 0.5–8 bar





Operating voltage 12 V AC



116.135.21.1 Gloss chrome 1 81

115

25°

02-38

125

3/8"

Ø 27-38

Ø 64

14

448

16












116.235.21.1 Gloss chrome 1 81

115

25°

02-38

125

3/8"

Ø 27-38

Ø 64

14

448

16

Product GuideTaps


HyTronic185 infra-red sensor tap with mixing lever, mains powered

Application


Characteristics

• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1

Product Details

Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material


HyTronic185 infra-red sensor tap with mixing lever, battery powered

Application


Characteristics

• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set

Product Details

Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; 6 V battery; Key for aerator; Fastening material















116.155.21.1 Gloss chrome 1 81

115

25°

02-38

125

3/8"

Ø 27-38

Ø 64

14

448

16













116.255.21.1 Gloss chrome 1 81

115

25°

02-38

125

3/8"

Ø 27-38

Ø 64

14

448

16


Product GuideTaps


Application


Characteristics

• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1

Product Details




Application


Characteristics

• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set

Product Details
















116.145.21.1 Gloss chrome 1 81

115

25°

02-38

125

3/8"

Ø 27-38

Ø 64

14

448

16













116.245.21.1 Gloss chrome 1 81

115

25°

02-38

125

3/8"

Ø 27-38

Ø 64

14

448

16

Product GuideTaps



Application


Characteristics

• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1

Product Details

Additional NoteMetal-reinforced hose R 3/8"; Filter; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material



Application


Characteristics

• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set

Product Details

Additional NoteMetal-reinforced hose R 3/8"; Filter; 6 V battery; Key for aerator; Fastening material














116.136.21.1 Gloss chrome 1 81

13

25°

02-38

95

3/8"

Ø 27-38

Ø 64

12

14

448












116.236.21.1 Gloss chrome 1 81

13

25°

02-38

95

3/8"

Ø 27-38

Ø 64

12

14

448


Product GuideTaps

HyTronic186 infra-red sensor tap with mixer lever, mains powered

Application


Characteristics

• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1

Product Details



HyTronic186 infra-red sensor tap with mixer lever, battery powered

Application


Characteristics

• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set

Product Details
















116.156.21.1 Gloss chrome 1 81

13

25°

02-38

95

3/8"

Ø 27-38

Ø 64

12

14

448













116.256.21.1 Gloss chrome 1 81

13

25°

02-38

95

3/8"

Ø 27-38

Ø 64

12

14

448

Product GuideTaps



Application


Characteristics

• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1

Product Details




Application


Characteristics

• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set

Product Details
















116.146.21.1 Gloss chrome 1 81

13

25°

02-38

95

3/8"

Ø 27-38

Ø 64

12

14

448













116.246.21.1 Gloss chrome 1 81

13

25°

02-38

95

3/8"

Ø 27-38

Ø 64

12

14

448


Product GuideTaps


Application

• For wall mounted installation• For public and semi-public areas• For concealed installation• For use in the hygiene area• For use in the industrial area• For use in the Geberit Duofix system• For cold or mixed water connection

Characteristics

• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature is not adjustable• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1

Product Details

Additional NoteNon-return valve; Filter; Key for aerator; 1.5 m connection cable; Fastening material




Application


Characteristics

• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature adjustment via the mixer lever• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1

Product Details

Additional Note2 non-return valves; 2 filters; Key for aerator; 1.5 m connection cable; Fastening material



Flow rate with tap aerator 6l/min

Flow rate >0.1 l/s

Relative humidity ≤ 100%

Product materialBrass / chrome-plated die-cast zinc



Operating temperature 1–40 °C








116.107.21.1 Gloss chrome 1 60

13

13R1/2

15

5525°

25°

165

14



Flow rate >0.1 l/s












116.127.21.1 Gloss chrome 1 60

13

13R1/2R1/2

15

5525°

25°

165

14

Product GuideTaps



Application


Characteristics

• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature pre-setting via the internal mixer• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1

Product Details





Application


Characteristics

• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature is not adjustable• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1

Product Details

Additional NoteNon-return valve; Filter; Key for aerator; 1.5 m connection cable; Fastening material





Flow rate >0.1 l/s












116.117.21.1 Gloss chrome 1 60

13

13R1/2R1/2

15

5525°

25°

165

14


Flow rate >0.1 l/s













116.108.21.1 Gloss chrome 1 60

13

13R1/2

215

19

15

5525°

25°


Product GuideTaps


Application


Characteristics

• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature adjustment via the mixer lever• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1

Product Details





Application


Characteristics

• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature pre-setting via the internal mixer• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1

Product Details






Flow rate >0.1 l/s












116.128.21.1 Gloss chrome 1 60

13

13R1/2R1/2

215

19

15

5525°

25°



Flow rate >0.1 l/s












116.118.21.1 Gloss chrome 1 60

13

13R1/2R1/2

215

19

15

5525°

25°

Product GuideTaps


Transformer for HyTronic185/186 and HyTronic87/88

Application

• For power supply of HyTronic87/88 and HyTronic185/186 outlet taps

Characteristics

• Power supply of up to 8 taps• Transformation of mains voltage to extra-low voltage

Product Details


Roughing box and transformer for HyTronic185/186 and HyTronic87/88

Application

• For concealed installation in solid or drywall construction• For power supply of HyTronic87/88 and HyTronic185/186 outlet taps

Characteristics

• Power supply of up to 8 taps• Transformation of mains voltage to extra-low voltage

Product Details

Additional NotePower supply unit; Concealed outlet for drilling diameter ø 76 mm; Cover for concealed outlet; Conduit pipe, 1.7 m


HansaVarox box for HyTronic87 and 88

Characteristics

• MeplaFix system elbow made from dezincification-resistant brass• Acoustically decoupled• For mounting HyTronic87/88 wall-hung taps

Additional Note2 MeplaFix system elbows, pre-mounted; 1 MeplaFix system elbow, loose, with seal; Rubber collar; Fastening ring



Output voltage 12 V AC

Article no. PU1

241.672.00.1 1


Mains frequency 50–60 Hz

Output voltage 12 V AC


Article no. PU1

241.631.00.1 1

77

77

Article no. R''

Dcm

D1cm

Hcm

Lcm

L1cm

lcm

Zcm

616.030.00.1 MF 1/2 10,4 11 7 14 11 2 5,5

L

RR

Z

H H

Z

D1

L1

l

D


Product GuideDuofix bidet frames

Duofix bidet frames

Duofix bidet frame 1.12 m

Application

• For installation of a wall-hung bidet with bolt fixings set at 180 or 230 mm centres

• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm

Characteristics

• Frame height 1120 mm• Bidet fastening distance 180 mm or 230 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• With wall brackets to allow up to a 200 mm duct. For larger ducts up


connection




Application



• For mounting in front of a solid or drywall construction (order PreWall brackets 111.844.00.1 separately)


Characteristics



connection



Duofix bidet frames

Article no. PU1

111.545.00.1 1

8090

100110

120130

140150

160170

180190

200210

220230

240250

260270

280290

300310

320330

340 350

360 964.161.00.0

8090100110

120130140150

160170180190

200210220230

240250260270

280290300310

320330340 350

360 964.162.00.0

964.160.00.0

112

50

100

0-20

0

73

18/238-38

48

10

0-20

4

0

Article no. PU1

111.544.00.1 1

964.160.00.0

964.160.00.0

98

50

0-20

0

73

18/23

8-38

48

10

0-20

4

0

Product GuideDuofix urinal frames



Application



• For mounting in front of a solid or drywall construction (order PreWall brackets 111.844.00.1 separately)


Characteristics



connection



Duofix urinal frames

Duofix urinal frame with pipe interruptor for mains fed water supply

Application

• For installation of wall-hung urinals• For installation in a half-height Duofix system wall in front of a solid or

drywall construction• For installation in a room-high Duofix system wall in front of a solid or

drywall construction• For installing in a load bearing stud wall• For mounting in front of a solid or drywall construction (order PreWall

brackets 111.844.00.1 separately)• For a screed of 0 - 200 mm (not in room height applications)• For mains fed water supply (note: Geberit urinal controls need a

minimum 1 bar supply)• For Geberit concealed urinal control• Not suitable for urinals with spreaders

Characteristics

• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame height from 112 cm to 130 cm, depending on urinal• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture

and dirt • Protection housing for service opening, can be cut to length• Flexible connection hose between concealed housing and inlet• Inlet ø 32 mm, height-adjustable• Fastening for urinal with M8 threaded rod, adjustable height and

distance• Fastening for outlet bend sound-absorbing and height-adjustable• Self-locking feet for tool-free alignment of the element. (Friction feet

have to be locked with spanner)• Additional fastening possible for urinal with accessories• Conversion possible for urinals with spray head with accessories• Mechanical pipe interruptor for mains water connection• Please see page 119 for details of pipe interruptor drainage installation

Article no. PU1

111.543.00.1 1

8090

100110

120130

140150

160170

180190

200210

220230

240250

260270

280290

300310

320330

340 350

360 964.161.00.0

8090100110

120130140150

160170180190

200210220230

240250260270

280290300310

320330340 350

360 964.162.00.0

964.160.00.0

82

50

0-20

0

73

18/23

8-38

48

10

0-20

4

0


1300

320-360

0-200

0

73

500

75-330

R1/2

1000

75 90

48

0

1180



Product Details

Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"; Connection pipe between inlet ø 32 mm and urinal, incl. seal on urinal; Suction trap ø 50 mm, incl. seal to urinal; Outlet pipe, PVC, ø 50 mm, incl. seal on the suction trap; 2 threaded rods M8 for urinal fastening; Fastening material

Excluded: Urinal flushing system


Duofix urinal frame for tank fed water supply

Application

• For installation of wall-hung urinals• For tank fed water supply (note: Geberit urinal controls need a

minimum 1 bar supply)• For mains fed water with urinals Ideal Standard Jasper Morrison,

Villeroy & Boch Omina Classic (#7557), Duravit Starck 3 (#082135), Kohler Odela

• For installation in a half-height Duofix system wall in front of a solid or drywall construction

• For installation in a room-high Duofix system wall in front of a solid or drywall construction

• For installing in a load bearing stud wall• For mounting in front of a solid or drywall construction (order PreWall

brackets 111.844.00.1 separately)• For a screed of 0 - 200 mm (not in room height applications)• For Geberit concealed urinal control• Not suitable for urinals with spreaders

Characteristics

• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame height from 112 cm to 130 cm, depending on urinal• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture

and dirt • Protection housing for service opening, can be cut to length• Flexible connection hose between concealed housing and inlet• Inlet ø 32 mm, height-adjustable• Fastening for urinal with M8 threaded rod, adjustable height and

distance• Fastening for outlet bend sound-absorbing and height-adjustable• Self-locking feet for tool-free alignment of the element. (Friction feet

have to be locked with spanner)• Additional fastening possible for urinal with accessories• Conversion possible for urinals with spray head with accessories

Product Details

Flow rate at 1 bar without flow limiter 0.3 l/s

Flow rate at 1 bar with flow limiter 0,24 l/s

Relative humidity < 100 %


Max. test pressure water 16 bar

Max. test pressure air / inert gas 3 bar


Article no. PU1

111.622.00.1 1








112-130

17-37

max. 65

0-20

0

min. 9

12-32

73

50

75-33

R1/2

48

75 9

100-118

0

0-20



Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"; Connection pipe between inlet ø 32 mm and urinal, incl. seal on urinal; Suction trap ø 50 mm, incl. seal to urinal; Outlet pipe, PVC, ø 50 mm, incl. seal on the suction trap; 2 threaded rods M8 for urinal fastening; Fastening material

Excluded: Urinal flushing system


Urinal installation set universal

Application

• For concealed installation in solid constructions• For accommodating the HyTronic infra-red urinal controls or HyTouch

pneumatic urinal controls• For mains fed water with urinals Ideal Standard Jasper Morrison,


• For tank fed water supply (note: Geberit urinal controls need a minimum 1 bar supply)

Characteristics

• Water connection at the top centre• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture

and dirt • Protection housing for service opening, can be cut to length

Product Details

Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"


Article no. PU1 PU4

111.623.00.1 1 14





Relative humidity 95 %


Article no. PU1

116.001.00.1 1

15

105

117

R1/2

15

105

7 1-9



Urinal installation set universal with flush pipe

Application

• For concealed installation in solid constructions• For accommodating the HyTronic infra-red urinal controls or HyTouch

pneumatic urinal controls• For tank fed water supply (note: Geberit urinal controls need a

minimum 1 bar supply)• For mains fed water with urinals Ideal Standard Jasper Morrison,


Characteristics

• Water connection at the top centre• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture

and dirt • Protection housing for service opening, can be cut to length

Product Details

Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"; Flush pipe D32


Duofix mounting plate for urinal division

Application

• For installation in a half-height Duofix system wall in front of a solid or drywall construction

• For installation in a room-high Duofix system wall in front of a solid or drywall construction

• For installation in a load bearing stud wall• For installation of urinal division

Characteristics

• Multi-layered, water-resistant bonding• Veneered wood plate• Can be cut to reduce distance between urinals

Product Details

Additional Note8 fastening brackets; Fastening material


Urinal division

Application

• For separating urinals mounted adjacent to one another

Characteristics

• Plastic urinal partition with concealed fastening• Corrosion-resistant bracket, hard-anodised surface

Additional NoteDistance bolts; Fastening material






Relative humidity 95 %


Article no. PU1

116.003.00.1 1

max. 61

15

105

R1/2

15

105

7 1-9

Product material Wood

Article no. PU1 PU4

111.859.00.1 1 40


115.200.11.1 White 1 16

35

50

74

44

92-98

0



Glass urinal division

Application

• For separating urinals mounted adjacent to one another • For mounting on solid or drywall constructions

Characteristics

• Concealed installation• Corrosion-resistant bracket, hard-anodised surface• Matt glass surface on both sides

Product Details

Additional NoteWall bracket; Cover; Fastening material


Glass urinal division

Application

• For separating urinals mounted adjacent to one another • For mounting on solid or drywall constructions

Characteristics

• Concealed installation• Corrosion-resistant bracket, hard-anodised surface• Matt glass surface on both sides

Product Details

Additional NoteWall bracket; Cover; Fastening material


HyTouch hand operated pneumatic urinal control, Sigma10

Application

• For manual flush actuation of urinals• For assembly in urinal installation set

Characteristics

• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Plastic actuator plate, with securing bar

Product Details

Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material


Product material ESG - (toughened safety glass)


115.210.CD.1 Opaque grey 1 15

115.210.GT.1 Opaque green 1

Product material ESG - (toughened safety glass)


115.214.CD.1 Opaque grey 1 15

115.214.GT.1 Opaque green 1 15

9350

525

95-105

0 4

08

35

75

75

80

496

95-105

0

50

35

4

08

75

75









Flush time range 4 / 8 / 12 s


116.015.KH.1 Gloss chrome / matt chrome / gloss chrome 1

116.015.KJ.1 White / gloss chrome / white 1

116.015.KK.1 White / gold-plated / white 1

116.015.KL.1 White / matt chrome / matt chrome 1

116.015.KM.1 Black / gloss chrome / black 1

116.015.KN.1 Matt chrome / gloss chrome / matt chrome 1

13

13

13



HyTronic infra-red urinal control, mains powered, Sigma10

Application

• For automatic flush actuation of urinals• For assembly in installation set

Characteristics

• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar

Product Details

Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Power supply unit; Solenoid valve; Fastening material


HyTronic infra-red urinal control, battery powered, Sigma10

Application


Characteristics

• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar

Product Details

Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Battery box; 2 lithium batteries; Solenoid valve; Fastening material


Nominal voltage 110–240 V AC


Power consumption < 0.5 W










Flush time factory setting 4 s

Flush time range 3–15 s

Activation time 7 s











13

13

1




Battery type Lithium battery 1.5 V (AA)

Lifetime lithium battery ~ 2 years

Lifetime alkaline battery ~ 1.5 years










Activation time 7 s











13

13

1



HyTouch hand operated pneumatic urinal control, Sigma50 - bespoke cover

Application

• For manual flush actuation of urinals• For assembly in installation set

Characteristics

• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Die-cast zinc actuator plate, with securing bar

Product Details



HyTouch hand operated pneumatic urinal control, Sigma50

Application


Characteristics


Product Details













116.016.00.1 Bespoke 1

13

13

14











116.016.11.1 White alpine 1

116.016.DW.1 Black RAL 9005 1

116.016.EP.1 Pergamon 1

116.016.SE.1 Green satinised 1

116.016.SD.1 Smoked glass reflective 1

116.016.SC.1 White with ornament x 1

13

13

14



HyTronic infra-red urinal control, mains powered, Sigma50

Application


Characteristics


Product Details



HyTronic infra-red urinal control, battery powered, Sigma50

Application


Characteristics


Product Details



Nominal voltage110–240 V AC














Activation time 7 s





116.026.GH.1 Brushed chrome 1

13

13

1
















Activation time 7 s





116.036.GH.1 Brushed chrome 1

13

13

1



HyTouch hand operated pneumatic urinal control, Samba

Application


Characteristics


Product Details



HyTronic infra-red urinal control, mains powered, Samba

Application


Characteristics


Product Details















116.011.46.1 Matt chrome 1

13

13

09















Activation time 7 s







116.021.46.1 Matt chrome 1

13

13

09



HyTronic infra-red urinal control, battery powered, Samba

Application


Characteristics


Product Details



HyTouch hand operated pneumatic urinal control, Bolero

Application


Characteristics


Product Details


















Activation time 7 s







116.031.46.1 Matt chrome 1

13

13

09













116.012.46.1 Matt chrome 1

13

13

12



HyTronic infra-red urinal control, mains powered, Bolero

Application


Characteristics


Product Details



HyTronic infra-red urinal control, battery powered, Bolero

Application


Characteristics


Product Details

















Activation time 7 s







116.022.46.1 Matt chrome 1

13

13

12
















Activation time 7 s







116.032.46.1 Matt chrome 1

13

13

12



HyTouch hand operated pneumatic urinal control, Mambo

Application


Characteristics

• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Stainless steel actuator plate, with securing bar

Product Details



HyTronic infra-red urinal control, mains powered, Mambo

Application


Characteristics

• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Stainless steel cover plate, with securing bar

Product Details













116.013.FW.1 Brushed stainless steel 1

13

13

13















Activation time 7 s





116.023.FW.1 Brushed stainless steel 1

13

13

11



HyTronic infra-red urinal control, battery powered, Mambo

Application


Characteristics

• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Stainless steel cover plate, with securing bar

Product Details



HyTouch hand operated pneumatic urinal control, Tango

Application


Characteristics


Product Details


















Activation time 7 s





116.033.FW.1 Brushed Stainless steel 1

13

13

11













116.014.46.1 Matt chrome 1

13

13

11



HyTronic infra-red urinal control, mains powered, Tango

Application


Characteristics


Product Details



HyTronic infra-red urinal control, battery powered, Tango

Application


Characteristics


Product Details

















Activation time 7 s







116.024.46.1 Matt chrome 1

13

13

08
















Activation time 7 s







116.034.46.1 Matt chrome 1

13

13

08

Product GuideAccessories


Accessories

Duofix full height stud

Application

• For creating a load bearing stud wall• For installation in a room-high Duofix system wall• For installing as intermediate or connecting element• For fastening Duofix installation elements and Duofix cross bars• Suitable for installation under sloping roofs up to 50° roof slope

Characteristics

• Galvanised• Height-adjustable (telescopic)

Product Details

Additional Note1 rail clip; Fastening bracket; Fastening material


Duofix support bracket leg and bracket

Application

• For installation in split-height PreWall construction in front of a solid or drywall construction



Characteristics

• Element height 820 - 1300 mm• Self-supporting• Support for lateral panelling• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Rotating foot plate, for installation in UW50 and UW75 profiles• Powder-coated, colour Geberit blue

Product Details

Additional NoteRear wall fastening; 2 rail clips; Fastening material


Duofix system rail

Application

• For construction of Duofix PreWall or partition wall• For erecting room-high Duofix system wall

Characteristics

• Galvanised

Additional Note2 U-rails; Fastening material


Accessories

Product material Steel

Article no. Hcm

hcm

PU1

111.871.00.1 220 - 280 211 1

111.872.00.1 260 - 320 251 1

111.873.00.1 300 - 360 291 1

111.874.00.1 340 - 400 331 1

h

H

47

5

47

5



111.830.00.1 1 5 50

Article no. PU1 PU4

111.878.00.1 1 80

82-130

4

0-20

0

73

4

48

300

5

34



Duofix support brackets for shallow WC

Application

• For additional support of WC pans with contact surfaces (x) smaller than 170 mm

• For use with Duofix WC frames

Characteristics

• U-profiles, galvanised

Product Details


Duofix feet-fixing to backwall

Application

• For alternatively fastening the feet of Duofix elements to the rear wall instead of the floor

Characteristics

• Galvanised• Adjustable depth, 130 - 200 mm

Product Details



Duofix support brackets for large washbasin

Application

• For fastening washbasins with a fastening distance larger than 380 mm to Duofix frame for washbasin

Characteristics

• Fastening distance adjustable 380 - 580 mm• Galvanised

Product Details



Duofix extension angle brackets

Application

• For fastening Duofix frames between two studs with a distance of 50 - 65 cm

Characteristics

• Galvanised

Product Details




Article no. PU1

111.847.00.1 1


Article no. PU1

111.867.00.1 1

X

13 - 20


Article no. PU1

111.868.00.1 1


Article no. PU1

111.869.00.1 1



Duofix PreWall brackets - Universal

Application

• For fastening Duofix frames in Duofix system rail• For fastening Duofix frames in front of solid or drywall construction

Characteristics


Product Details

Additional Note2 Duofix PreWall brackets for system; 2 rail clips; 2 panelling supports, push-in; Fastening material


Duofix PreWall brackets with extension set

Application

• For fastening Duofix frames in front of solid or drywall construction• Not suitable for use with Duofix system rail

Characteristics


Product Details

Additional Note2 PreWall brackets; 2 M10 threaded rods with long nut; 2 Duofix PreWall bracket extensions M10 with long nut; 2 panelling supports, push-in; Fastening material


Duofix corner PreWall brackets

Application

• For universal fastening of Duofix installation elements to a solid or drywall construction

Characteristics

• Variable angle adaptation for corner installation• Adjustable depth, 140 - 200 mm• Galvanised

Additional Note2 PreWall brackets; 2 M10 threaded rods with long nut; Fastening material

Excluded: Panelling supports, push-in


Duofix PreWall extension bolts

Application

• For extending Duofix wall anchorings from 200 - 400 mm

Product Details

Additional Note2 M10 threaded rods with long nut


Galvanised plasterboard screw

Application

• For fastening of the panelling and Aqua plasterboard panels to the Duofix support system

Characteristics

• Self-drilling screws 4.2 x 35 mm




111.844.00.1 1 8 384


Article no. PU1

111.843.00.1 1

13-20

13-20


111.835.00.1 1 20 560



111.887.00.1 1 10 2000


461.030.00.1 200 2000 20000

14-20

220 M10



Duofix insulating strip

Application

• To avoid the formation of cracks between Duofix panelling and building structure

Characteristics

• Single-sided self-adhesive• Permanently elastic• Vinyl foam tape


HyTronic Service Handy

Application

• For setting and enquiry of setting values of various electronic Geberit products such as washbasin taps, WC flush actuators, urinal controls and sanitary flushings

Characteristics

• 4-line display• Menu guidance• Saving and transfer of settings to other control units of the same type• Compatible with existing control units• Data transmission with infra-red light• Battery-operated

Additional NotePouch; 3 batteries type AAA 1.5 V


HyTronic Clean Handy

Application

• For deactivation of infra-red controlled Geberit flushing valves and flush actuators for sanitary cleaning

Characteristics

• Remote control

Additional NoteConcise instructions


Low flush beaker for UP200

Application

• For Geberit concealed cistern UP200• For reducing flushing volumes to 4.5 l and 3l or 4 l and 2.6 l• Should only be used in conjunction WCs suitable for low flushing

volumes


Low flush beaker for UP320

Application

• For Geberit concealed cistern UP300 and UP320• For reducing flushing volumes to 4l and 2l flush• Should only be used in conjunction WCs suitable for low flushing

volumes


Monolith wall-hung leg supports New

Application

• For supporting Geberit wall-hung Monolith sanitary modules on drywall construction and low load bearing walls


Article no. PU1 PU4

111.889.00.1 1 60

Article no. PU1

115.860.00.1 1

Article no. PU1 PU2

115.831.00.1 1 10

30 m

1

8

Article no. PU1

242.310.00.1 1

Article no. PU1

241.894.00.1 1

Article no. PU1

131.104.00.1 1



Monolith support brackets for shallow wall-hung WC


Monolith bottom water connection set

Application

• For use in bottom connections


Article no.

131.105.00.1

Article no. PU1

131.074.00.1 1

X


Product GuideDrainage

Drainage

Duofix straight connector

Application

• For all drainage pipes• For push-on seal• For WCs with horizontal outlet• For Duofix WC frames

Characteristics

• UV-resistant

Product Details

Additional NoteLip seal EPDM; Protection cap


Duofix WC S-Bend outlet

Product Details

Additional NoteLip seal EPDM; Sealing collar EPDM; Adhesive PVC-U


Drainage

Product material PE-HD

Article no. dØmm

d1Ømm

Dcm

Lcm

lcm

Kcm

Colour PU1 PU3 PU4

366.887.16.1 90 90 11,2 31 27,5 24 Black 1 40 160

367.887.16.1 110 90 11,2 34,5 31,5 28 Black 1 30 120

Product material PVC

Article no. dØmm

ADcm

Hcm

Colour PU1 PU2 PU4

388.350.29.1 90 14,5 - 34,5 16,7 Grey 1 10 80

d1d

L

D

l

K

dAD

H

di



Duofix 90° bend connector

Application

• For all drainage pipes• For WCs with horizontal outlet• For Duofix WC elements

Characteristics

• UV-resistant

Product Details



Bend with connector for wall-hung WC

Application

• For all drainage pipes• For appliances with horizontal outlet

Characteristics

• UV-resistant

Product Details



Angle 90°


Article no. dØmm

d1Ømm

Acm

angle Hcm

Kcm

Colour PU1 PU2 PU4

366.061.16.1 90 90 11 90° 22,5 13 Black 1 10 120

Angle 90°


Article no. dØmm

d1Ømm

Acm

angle acm

Hcm

Kcm

Colour PU1 PU2 PU3 PU4

367.792.16.1 110 110 7,5 90° 4,5 22,5 13 Black 1 5 25 100

A

KH

d1

d

A

KH

a

d1

d



Duofix 45 ° bend connector

Application

• For all drainage pipes• For WCs with horizontal outlet• For Duofix WC frames

Characteristics

• UV-resistant

Product Details



90 / 110 mm adaptor

Application

• For all drainage pipes• For connecting 90 mm PE connectors to 110 mm sockets

Characteristics

• UV-resistant• With stop

Product Details

Additional NoteLip seal EPDM


Angle 45°


Article no. dØmm

d1Ømm

angle acm

Lcm

Kcm

Colour PU1

367.945.16.1 110 90 45° 6 8,7 3 Black 1


Article no. d1Ømm

d2Ømm

Colour PU1 PU2 PU4

367.928.16.1 90 110 Black 1 10 600

45

d

K

d1

a

L

75

d2d1



Duofix manifold connector

Application

• For all drainage pipes• For Duofix WC frames when using floats

Product Details

Additional NoteManifold connector bend; Fin seal; 50 mm length of 110 mm PVC pipe


Extended Duofix WC connection set

Application

• For Duofix WC frames

Product Details

Additional Note2 cover caps


Product material PVC

Article no. dØmm

angle°

Z1cm

Z2cm

Colour PU1 PU3 PU4

107.35.05B 110 5° 0,64 6,23 Black 1 12 360

F107.35.09B 110 9° 0,89 6,28 Black 1 24 720

107.35.14B 110 14° 1,09 6,47 Black 1 12 360

F107.35.18B 110 18° 1,13 6,47 Black 1 12 360

107.35.24B 110 24° 1,4 6,95 Black 1 12 360

F107.35.29B 110 29° 1,83 7,73 Black 1 12 360

107.35.34B 110 34° 1,83 7,73 Black 1 12 360

Product material PE

Article no. dØmm

d1Ømm

Lcm

L1cm

lcm

l1cm

Colour PU1 PU4

152.438.46.1 90 45 26,5 26,5 22 24 Matt chrome 1 164

Z1Z2

d d

l1

d1 55

102±5d

L1

l

L



Flush pipe extension 1 m

Application

• For extension of outlet sleeves• For combination with overflow pipe cone

Product Details


Monolith S-bend for wall-hung WC

Application

• For connecting wall-hung WC to floor outlet 15 - 30 cm from wall

Additional NoteS-bend, PVC; WC outlet bend, HDPE, ø 90 mm


Monolith straight pipe for BTW-WC

Application

• For connecting floor-standing WC to wall outlet 18 cm from wall

Additional NoteWC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm


Product material PE

Article no. dØmm

diØmm

smm

Acm²

Lm

Colour PU1 PU2 PU4

152.170.16.1 45 40 2,5 12,6 1 Black 1 5 270


131.088.29.1 Grey 1


131.083.16.1 Black 1

L (m)

d

s

di

Acm2

d

Product GuideTraps


Monolith drainage connection set for BTW-WC

Application

• For connecting floor-standing WC to floor outlet 7 - 15 cm from wall

Additional NoteWC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; Rubber seal EPDM; Fastening material


Monolith offset outlet pipe for wall mounted WC

Application

• For connecting wall-hung WC to wall outlet 17 - 19 cm

Additional NoteStraight connector for WC, 7 cm offset, PP, 90 mm; 2 sealing collars


Monolith step pipe for wall-hung WC

Application

• For connecting wall-hung WC to wall outlet 21-23 cm

Additional NoteWC outlet pipe, 3 cm offset, HDPE, ø 90 mm


Traps

Washbasin trap chrome with 1 1/4" BSP waste connection and 32 mm outlet

Application

• For washbasin

Characteristics

• Water seal with partition wall• Corrosion-resistant• Plug connection on the outlet pipe• With 32 mm / 1 1/4" waste adaptor

Product Details



131.082.16.1 Black 1

Article no. PU1

131.108.11.1 1



Traps

Depth of water seal 75 mm

Drainage capacity 0.7 l/s




Product GuideTraps

Bath trap, overflow and chrome pop-up waste standard

Characteristics

• Without contraflow principle• Bathtub outlet and overflow assembly• Water seal• Pop-up operation• Outlet connection can be rotated as needed• With 40 mm / 1 1/2" waste adaptor

Additional NoteTrap; Cable actuator; Overflow; Outlet bend; Adaptor; Fastening material; Outlet cover


Bath trap, overflow and chrome pop-up waste large

Characteristics

• Without contraflow principle• Bathtub outlet and overflow assembly• Water seal• Pop-up operation• Outlet connection can be rotated as needed• With 40 mm / 1 1/2" waste adaptor

Additional NoteTrap; Cable actuator; Overflow; T-piece; Outlet bend; Adaptor; Fastening material; Outlet cover



150.535.21.1 Gloss chrome 1 10

100

4340

160-30050

12040

92

180

180


150.536.21.1 Gloss chrome 1 8

100

4340

160-30050

12040

92

180

180

Product GuideTraps


Bath trap, overflow and filler, chrome pop-up waste standard

Characteristics

• Bathtub drain, overflow and inlet set• Water seal• Pop-up operation• Outlet connection can be rotated as needed• Direction of inlet jet flexible• Water supply connection bracket can be rotated • Water supply connection bracket suitable for Mepla pipes• Without contraflow principle• With 40 mm / 1 1/2" waste adaptor

Additional NoteTrap; Cable actuator; Overflow; Water inlet; Water supply connection bracket; Outlet bend; Adaptor; Fastening material; Outlet cover


Bath trap, overflow and filler, chrome pop-up waste large

Characteristics

• Bathtub drain, overflow and inlet set• Water seal• Pop-up operation• Outlet connection can be rotated as needed• Direction of inlet jet flexible• Water supply connection bracket can be rotated • Water supply connection bracket suitable for Mepla pipes• Without contraflow principle• With 40 mm / 1 1/2" waste adaptor

Additional NoteTrap; Cable actuator; Overflow; Water inlet; T-piece; Water supply connection bracket; Outlet bend; Adaptor; Fastening material; Outlet cover

Ordering InformationArticle no. Colour PU1 PU2

150.712.21.1 Gloss chrome 1 12

100

4340

160-30050

3/4"/ 16

12040

92

180

180


150.713.21.1 Gloss chrome 1 12

100

4340

160-30050

3/4"/ 16

12040

92

180

180


Product GuideTraps

PushControl bath trap, overflow and chrome pop-up waste, standard

Application

• For bathtubs with valve hole ø 52 mm• For bathtubs in standard size• To fit most european bath tubs

Characteristics

• Bathtub drain with push button actuation virtually flush with the tub• Construction height trap 90 mm• Odour trap 270° swivelling• Drain valve made from stainless steel• With 40 mm / 1 1/2" waste adaptor

Product Details

Additional NoteDrain valve; Trap; Overflow; Cable actuator; Ready-to-fit set; Outlet pipe


PushControl bath trap, overflow and chrome pop-up waste, long

Application

• For bathtubs with valve hole ø 52 mm• For installation in bathtubs with special lengths• To fit most european bath tubs

Characteristics


Product Details



Drainage capacity 1 l/s

Overflow capacity 0.65 l/s



150.770.11.1 White alpine 1 10 80

150.770.21.1 Gloss chrome 1 10 80

145-26

23-46

45

59 89

14 10

4340





150.771.11.1 White alpine 1 10 80

150.771.21.1 Gloss chrome 1 10 80

24-50

23-46

45

59 89

4340

14 10

Product GuideTraps


PushControl bath trap, overflow and chrome pop-up waste, high

Application

• For bathtubs with valve hole ø 52 mm• For installation in bathtubs with special heights• To fit most european bath tubs

Characteristics


Product Details



Extended connection set for thicker baths

Application

• For acrylic bathtubs with overflow

Additional NoteDrain valve seat extension with O-ring; Banjo bolt; Adjusting screw


Shower tray trap and waste 90 mm

Application

• For shower trays with valve hole ø 90 mm• For shower trays without overflow

Characteristics

• Dip tube and dip tube support can be dismantled• Construction height 80 mm• With 40 mm / 1 1/2" waste adaptor

Product Details

Additional NoteTrap; Screw connection ø 40 mm; Outlet bend; Adaptor; Fastening material; Outlet cover


Shower tray trap and waste 50 mm

Application

• For shower trays with valve hole ø 52 mm • For shower trays without overflow

Characteristics

• Dip tube and dip tube support can be dismantled• Construction height 85 mm• With 40 mm / 1 1/2" waste adaptor

Product Details

Additional NoteTrap; Outlet bend; Adaptor; Outlet cover






150.772.11.1 White alpine 1 10 80

150.772.21.1 Gloss chrome 1 10 80

Article no. PU1

150.247.00.1 1

15-28

44-60

45

59 89

4340

14 10

27


Drainage capacity with 15 mm head of water 0.5 l/s





Article no. dØ Colour PU1 PU2

150.688.21.1 40 Gloss chrome 1 10

115

02 25-

92

43 8

ø 90ø40ø43

47

03-15

85

85

47

8

ø40ø43


Product GuideTraps

Duofix shower element H130

Application

• For use within buildings• For drainage of wet room installations• For use with composite seals• For installation in a half-height Duofix system wall in front of a solid or

drywall construction• For installation in a room-high Duofix system wall

Characteristics

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Floor construction maximum 20 cm• Minimum height of screed 90 mm• Panelling thickness 10–25 mm, sealing level can be adjusted up to

15 mm• Possible tile build-up 6–26 mm• Height-adjustable element• Mounting plate (wood) for surface-mounted and concealed taps,

height- and depth-adjustable• Mounting plate (metal) for surface-mounted taps, height-adjustable• Sealing level for sealing connection that is free of tension• Outlet body with drainage capacity of 0.85 l/s• Trap insert can be removed for cleaning• Drainage connection left, right or front centre• Speak to us about our partnership with wet room floor specialists

Additional NoteFastening material; Bidet outlet bend, HDPE, ø 50 mm; Outlet bend HDPE ø 50 mm for front connection

Excluded: Ready-to-fit set for shower element; Tap connections


Duofix shower element H50 New

Application

• For use within buildings• For drainage of wet room installations• For use with composite seals• For installation in a partial-height Duofix system wall in front of a solid

or drywall construction• For installation in a room-high Duofix system wall

Characteristics

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Floor construction maximum 20 cm• Minimum height of screed 90 mm• Panelling thickness 10–25 mm, sealing level can be adjusted up to

15 mm• Possible tile build-up 6–26 mm• Height-adjustable element• Sealing level for sealing connection that is free of tension• Outlet body with drainage capacity of 0.85 l/s• Trap insert can be removed for cleaning• Drainage connection left, right or front centre• Speak to us about our partnership with wet room floor specialists

Product Details

Additional NoteFastening material; Bidet outlet bend, HDPE, ø 50 mm; Outlet bend HDPE ø 50 mm for front connection

Excluded: Ready-to-fit set for shower element


Article no. PU1

111.731.00.1 1

50

130

100

9

55

9–20

73

0

24

77

48

11

11

0

100

65

355355

5

45°

245

24

8

16


Article no. PU1

111.743.00.1 1

50

9

55

41

9–20

77

24

73 48

11

65

355355

5

45°

245

24

8

16

Product GuideTraps


Ready-to-fit set for Duofix shower element, stainless steel

Application

• For use with Geberit Duofix shower element

Characteristics

• Can be removed for cleaning• Plastic sight frame, mother-of-pearl silver• Brushed stainless steel cover

Additional NoteSight frame; Cover; Hair trap


Ready-to-fit set for Duofix shower element, white

Application


Characteristics

• Can be removed for cleaning• Plastic sight frame, mother-of-pearl silver• Plastic cover, white alpine



Ready-to-fit set for Duofix shower element, gloss chrome

Application


Characteristics

• Can be removed for cleaning• Plastic sight frame, mother-of-pearl silver• Plastic cover, gloss chrome



Ready-to-fit set for Duofix shower element, bespoke

Application


Characteristics

• Can be removed for cleaning• Plastic sight frame, black• For customers to install a bespoke finish with a thickness of 6 mm -

26 mm




154.330.FW.1 Brushed stainless steel 1 21


154.330.11.1 White alpine 1 21


154.330.21.1 Gloss chrome 1 21

Article no. PU1 PU2

154.330.00.1 1 21


Product GuideTraps

Uniflex drain for flat showers

Application

• For the drainage of a wet room installation• For use with composite seals• For use within buildings

Characteristics

• Minimal construction height 95 mm and maximum 195 mm• Grating made of stainless steel• Sealing collar, fleece-laminated 500 x 500 mm• Vernier adjustment of grating in height, inclination and off-set possible

via compensating ring• With 40 mm / 1 1/2" waste adaptor

Product Details

Additional NoteTrap; Adaptor; Thin bed top piece; Grating; Rubber collar; Compensating ring; Hair trap; Seal set for use with PVC ; Protection housing; Installation aid


Standard grating screwable

Application

• For Uniflex Outlet for floor even showers

Characteristics

• Can be locked with screws• Grating and screws made of stainless steel

Product Details

Additional NoteScrews


Design grating - architectural, squares

Application

• For the drainage of a wet room installation

Characteristics

• Without screw connection

Product Details


Design grating - architectural, radial

Application


Characteristics


Product Details


Design grating - trendy

Application


Characteristics


Product Details


Drainage capacity min. 0.45 l/s

Drainage capacity max. 0.74 l/s


Article no. PU1

154.005.00.1 1


Article no. PU1

154.300.00.1 1

1-11

85

145

59

30

10ø40ø43

91

91

49


Article no. PU1

154.301.00.1 1


Article no. PU1

154.302.00.1 1


Article no. PU1

154.303.00.1 1

Product GuideTraps


Design grating - classic, natural

Application


Characteristics


Product Details


Design grating - puristic, square

Application


Characteristics


Product Details


Design grating - puristic, circle

Application


Characteristics


Product Details


Uniflex shower channel, floor

Application

• For use within buildings• For the drainage of a wet room installation• For use with composite seals• For installing in the room centre

Characteristics

• Minimal construction height 112 mm• Drainpipe and grating frame made of stainless steel• Height-adjustable• Insulation of material noise• Stress elimination to prevent cracking of ceramic plates• Vernier adjustment of grating in height, inclination and off-set possible

via compensating ring• Outlet bend ø 50 mm

Product Details

Additional Note2 odour traps, incl. dip tube; Outlet bend; Drainpipe with the installation flange for thin mortar installation; Frame of grating; Rubber collar; 4 feet, incl. acoustic insulation elements; Protection housing; Adhesive; Fastening material; Excludes ready to fit set



Article no. PU1

154.304.00.1 1


Article no. PU1

154.305.00.1 1


Article no. PU1

154.306.00.1 1



Article no. lcm

l1cm

l2cm

l3cm

PU1 PU4

154.100.00.1 70 33 13,7 80 1 20

154.101.00.1 80 38 18,7 90 1 20

154.102.00.1 90 43 23,7 100 1 20

154.103.00.1 100 48 28,7 110 1 20

154.130.00.1 110 53 33,7 120 1

154.131.00.1 120 58 38,7 130 1

1514

6

l

l3

l2l1

50

19314

10-15

12-26

112-17652


Product GuideTraps

Uniflex shower channel, wall

Application

• For use within buildings• For the drainage of a wet room installation• For use with composite seals• For wall mounting

Characteristics

• Minimal construction height 112 mm• Drainpipe and grating frame made of stainless steel• Height-adjustable• Insulation of material noise• Stress elimination to prevent cracking of ceramic plates• Vernier adjustment of grating in height, inclination and off-set possible

via compensating ring• Outlet bend ø 50 mm

Product Details

Additional Note2 odour traps, incl. dip tube; Outlet bend; Drainpipe with the installation flange for thin mortar installation; Frame of grating; Rubber collar; 4 feet, incl. acoustic insulation elements; Margin insulation tape for decoupling solid-borne sound; Protection housing; Adhesive; Fastening material; Excludes ready to fit set


Ready-to-fit set shower channel, creative set

Application

• For use with bespoke Uniflex shower channel ready-to-fit set

Characteristics

• Production and care instructions for the manufacture of individual design covers

Additional NoteExtraction tool; 10 damping caps (8.5 mm); 10 damping caps (14.5 mm)


Ready-to-fit set shower channel, brushed stainless steel

Application

• For use with Uniflex shower channel

Characteristics

• Brushed stainless steel

Additional NoteDesign cover; 10 damping caps; Extraction tool


Ready-to-fit set shower channel, bespoke

Application

• For use with Uniflex shower channel

Characteristics

• Lid can be covered with ceramic plates• Requires 154.299.00.1

Additional NoteDesign cover; Extraction tool




Article no. lcm

l1cm

l2cm

l3cm

PU1 PU4

154.105.00.1 70 33 13,7 80 1 20

154.106.00.1 80 38 18,7 90 1 20

154.107.00.1 90 43 23,7 100 1 20

154.108.00.1 100 48 28,7 110 1 20

154.135.00.1 110 53 33,7 120 1

154.136.00.1 120 58 38,7 130 1

Article no. PU1

154.299.00.1 1

135

193

6

3

14

6l

l3

l214l1

50

10-15

12-26

52112-176

Article no. Lcm

PU1 PU4

154.350.00.1 70 1 40

154.351.00.1 80 1 40

154.352.00.1 90 1 26

154.353.00.1 100 1 26

154.354.00.1 110 1

154.355.00.1 120 1

Article no. Lcm

PU1 PU4

154.360.00.1 70 1

154.361.00.1 80 1

154.362.00.1 90 1

154.363.00.1 100 1

154.356.00.1 110 1

154.357.00.1 120 1 20

5

L

Product GuideFill and flush valves for ceramic cisterns


Fill and flush valves for ceramic cisterns

Impuls380 side filling valve

Application

• For filling cisterns• For use with grey water (rainwater), providing a filter system is used• For use with sea water (brass parts must be dezincification-resistant)• For use with clean drinking water• Can be installed in an exposed cistern• Not suitable for use with water with an elevated chlorine content

(swimming pools, etc.)• Not suitable for use with cleaning agents, disinfectants and colouring

agents put into the cistern (contact Geberit if in doubt)

Characteristics

• The filling height can be set by turning the spindle• The valve opens after the water level drops by 20 mm

Product Details

Additional NoteAdaptor; Cone screw fitting; Spacer


Impuls360 bottom filling valve

Application

• For water supply connection at the bottom• For water supply connection 1/2"

Characteristics

• Height-adjustable

Product Details

Additional NoteSeal; Nut


Impuls260 dual flush valve with "half moon" buttons for ceramic cisterns

Application

• For installation in ceramic cisterns

Characteristics

• Overflow pipe height-adjustable• Adjustable flush volume depending on amount of water in cistern• Dual flush actuator with threaded rod for fastening the cistern cover

Product Details

Additional NoteDual flush unit; Lid attachment; Dual flush actuator; Fastening material; Seals

Excluded: Fill valve




Flow rate at 0.5 bar 0.07 l/s

Flow rate at 3 bar 0.19 l/s

Line noise at 3 bar 12 dB(A)


Pressure shock increase at 6 bar +1 bar

Max. temperature during storage 40 °C



240.700.00.1 1 10 200

212

3

243

112

61



Flow rate at 3 bar 0.16 l/s



281.206.00.1 1 25 600

Actuation force 18 N






261.157.00.1 1 36 432

WL

CL

CL

WL

235 - 385

146 - 296

25

92

G

41.5 9 - 15

96

71

185-28

38-45

325-41

min. 9 mmmax. 35 mm

8

125


Product GuideFill and flush valves for ceramic cisterns

Impuls280 dual flush valve with round chrome and blue square flush buttons for ceramic cisterns

Application

• For installation in ceramic cisterns

Characteristics

• Overflow pipe height-adjustable• Adjustable flush volume depending on amount of water in cistern• Dual flush actuator with threaded rod for fastening the cistern cover

Product Details

Additional NoteDual flush unit; Dual flush actuator with rosette; Fastening material; Rosette ø 50 mm




Actuation force 18 N





282.350.KD.1 Gloss chrome / blue 1 18 108

312-45 293-431

min. 08

max. 15

38-45 12-45

17-27

min. 09

max. 2

16

8

Product GuideGeberit AquaClean


Geberit AquaClean

Geberit AquaClean 8000plus wall mounted WC

Application

• For gentle cleaning with water• For mains fed water connection• Complete solution for concealed cistern

Characteristics

• Warm water wash with adjustable temperature• Warm air dryer with adjustable temperature• Washdown WC with surface-coated ceramic appliance• WC seat with soft closing lid• Infra-red user detection• Odour extraction• Shower arm can be set to 7 positions• Oscillating spray (automatic forward and reverse motion of the spray

arm)• Pulsating spray• Adjustable spray intensity• Automatic pre-rinsing of spray nozzle with fresh water and post-

rinsing with nozzle cleaner for Geberit AquaClean 8000plus• Integrated storage water heater tank with ON/OFF and economy

setting• 4 programmable user profiles• Water supply connection on the left side• Mains fed water connection required• Functions and settings adjustable via remote control

Product Details

Additional NoteIncludes: Remote control with LC display, wall-mounted holder and batteries, LR03 (AAA); Cover plate for remote control compartment; Active carbon filter; Nozzle cleaner for Geberit AquaClean 8000plus; Water supply connection set for UP300 / UP320 concealed cistern; Dryer fan with housing; Acoustic insulation set; Fastening material; Spray shield


Using the supplied standard water connection set, all concealed cisterns (except for UP200 and UP720) can be connected with the prepared conduit pipe.The UP200 concealed cistern additionally requires the reinforced braided hose with T-piece (art. no. 241.819.00.1) to be ordered.The UP720 concealed cistern additionally requires the connection hose 242.413.00.1 to be ordered.

Note

The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.

Geberit AquaClean

42

18−2043

21−255−9

415−455

25

135

615

215

290



Power consumption 1000 W

Power consumption standby / with heating switched on 1 / 9 W

Protection degree IP x4

Protection class I

Length of mains connection cable 70 cm

Air volume flow rate odour extraction unit 10 m3/h

Air volume flow rate dryer 12 m3/h

Flow rate, anal shower 2.1–5.5 l/min

Flow rate, Lady shower 1.4–3 l/min

Dryer temperature factory setting 45 °C

Dryer temperature range 20–45 °C

Water temperature factory setting 37 °C

Water temperature range 10–39 °C

Storage temperature -10 – +60 °C


Spray time factory setting 20 s

Number of shower pressure settings, shower spray 7

Flow pressure range 1–10 bar

Storage water heater capacity 2.0 l

Net weight 32 kg

Gross weight 37 kg

Maximum load WC seat / WC lid 150 kg


180.101.11.1 White alpine 1 4



Geberit AquaClean 8000 wall mounted WC

Application

• For gentle cleaning with water• For mains fed water connection• Complete solution for concealed cistern

Characteristics

• Warm water wash with adjustable temperature• Washdown WC with surface-coated ceramic appliance• Infra-red user detection• WC seat with soft closing lid• Integrated storage water heater tank with ON/OFF and economy

setting• Oscillating spray (automatic forward and reverse motion of the spray

arm)• Adjustable spray intensity• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Water supply connection on the left side• Mains fed water connection required

Product Details

Additional NoteWater supply connection set for UP300 / UP320 concealed cistern; Acoustic insulation set; Fastening material; Spray shield


Using the supplied standard water connection set, all concealed cisterns (except for UP200 and UP720) can be connected with the prepared conduit pipe.The UP200 concealed cistern additionally requires the reinforced braided hose with T-piece (art. no. 241.819.00.1) to be ordered.The UP720 concealed cistern additionally requires the connection hose 242.413.00.1 to be ordered.

Note





Power consumption standby / with heating switched on 1 / 9 W


Protection class I

Length of mains connection cable 70 cm









Net weight 27.5 kg

Gross weight 34 kg



146.181.11.1 White alpine 1 6

42

18−2043

21−25

205

5−9

415−455

25

135

615

215

290



Geberit AquaClean 5000plus New

Application

• For gentle cleaning with water• For subsequent mounting on a WC ceramic (replaces WC seat and

lid)• For mains fed water connection

Characteristics

• Warm water wash• WC seat with soft closing lid• Infra-red user detection• Odour extraction• Shower arm can be set to 7 positions• Oscillating spray (automatic forward and reverse motion of the spray

arm)• Pulsating spray• Adjustable spray intensity• Integrated storage water heater tank with ON/OFF and economy

setting• Warm air dryer with adjustable temperature• Mains connection cable can be cut to length• Mains power connection at rear with hidden pipe-laying option to the

left or right• Functions and settings adjustable via remote control• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Water supply connection on the left side

Product Details

Additional NoteIncludes: Remote control with LC display, wall-mounted holder and batteries, LR03 (AAA); Active carbon filter; Water supply connection set for left side connection; Spray nozzle (replacement); Fastening material; Compensation pad for toilet seat; Spray shield


For installation with UP200 concealed cistern, order:• Article no. 240.634.00.1 for UP200 concealed cistern H82• Article no. 240.635.00.1 for UP200 concealed cistern H98For installation with the UP300 and UP320 concealed cistern, order:• Article no. 249.801.00.1For installation with the UP720 concealed cistern, order:• Article no. 242.413.00.1 and 249.801.00.1

Note


185

485

35

3030 22

55

155

35

15

R3/825

11

29

13-165

507

295

195

385

225

54-8




Power consumption standby / with heating switched on 0.9 / 6.7 W


Protection class I

Length of mains connection cable 2 m

Air volume flow rate odour extraction unit 4.4 m3/h

Air volume flow rate dryer 9.1 m3/h

Flow rate, anal shower 1.7–3 l/min

Flow rate, Lady shower 0.6–2 l/min

Dryer temperature factory setting 45 °C

Dryer temperature range 20–45 °C


Water temperature range 10–39 °C







Net weight 6.3 kg

Gross weight 9.2 kg



146.114.11.1 White alpine 1 12



Geberit AquaClean 5000 New

Application



Characteristics

• Warm water wash with adjustable temperature• WC seat with soft closing lid• Infra-red user detection• Odour extraction• Spray arm with nozzle for anal area, can be extended• Oscillating spray (automatic forward and reverse motion of the spray

arm)• Adjustable spray intensity• Integrated storage water heater tank with ON/OFF setting• Mains power connection at rear with hidden pipe-laying option to the

left or right• Mains connection cable can be cut to length• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Water supply connection on the left side• Mains fed water connection required

Product Details

Additional NoteIncludes: Active carbon filter; Water supply connection set for left side connection; Spray nozzle (replacement); Fastening material; Compensation pad for toilet seat; Spray shield



Note







Protection class I


Air volume flow rate odour extraction unit 4.4 m3/h

Flow rate, anal shower 1.7–3 l/min








Net weight 6.1 kg

Gross weight 9 kg


185

485

35

3030

22

55

155

35

15

R3/825

11

29

13-165

507

295

195

385

225

54-8


146.122.11.1 White alpine 1 12



Geberit AquaClean 4000 New

Application



Characteristics

• Warm water wash• WC seat with soft closing lid• Spray intensity can be set to 5 different levels• Mains power connection at rear with hidden pipe-laying option to the

left or right• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Integrated storage water heater tank with ON/OFF setting• Water supply connection on the left side

Product Details



Note







Protection class I










Net weight 4.1 kg

Gross weight 7.5 kg


40

15

R1/2 155

3030

17

3

55

4

55

145

15

13-165

10

2855-9

225

5

505

14

26


146.132.11.1 White alpine 1 12



Geberit AquaClean Design Panel for 8000plus & 8000 New

Application

• For retrofitting Geberit AquaClean complete solutions to a Geberit concealed cistern, without conduit pipe

• For use with Geberit UP300 and UP320 concealed cistern• For use with Geberit Twinline concealed cistern 12 cm (UP130) (model

110.8xx from year of manufacture 1997, and from year of manufacture 1988 with built-in conversion set for dual flush; Geberit actuator plates Highline, Twinline, 200F)

• For use on fully tiled surface

Characteristics

• Suitable for distance of 65-70 cm, measured from the middle of the actuator plate to the middle of the ceramic fastening

• Retrofit set can be mounted and removed without damaging the tile surface

• Design Panel with integrated actuation for dual flush• Surface even actuation• Hidden water supply connection• Cable for power connection can be housed in Design Panel• High pressure laminate

Additional NoteDesign Panel; Reinforced braided hose; Y-branch; 4 actuator rods; T-piece; Fastening material


Geberit AquaClean Design Panel for 8000plus & 8000, glass New

Application





Characteristics

• Suitable for distance of 65-70 cm, measured from the middle of the actuator plate to the middle of the ceramic fastening


• Design Panel with integrated actuation for dual flush• Surface even actuation• Hidden water supply connection• Cable for power connection can be housed in Design Panel



Note



115.323.11.1 White 1

107

10

162

475

65-70

48

58

106

95

18

15


115.325.SG.1 Black 1 10

115.325.SF.1 White 1 10

107

10

162

475

65–70

48

58

106

95

18

2



Geberit AquaClean Design Panel for 4000, 5000 & 5000plus New

Application





Characteristics


• Design Panel with integrated actuation for dual flush• Surface even actuation• Water supply connection hidden in design panel• High pressure laminate



Geberit AquaClean Design Panel for 4000, 5000 & 5000plus, glass New

Application





Characteristics


• Design Panel with integrated actuation for dual flush• Surface even actuation• Water supply connection hidden in design panel



Note



115.322.11.1 White 1

107

162

38

59

95

495

15


115.324.SG.1 Black 1 10

115.324.SF.1 White 1 10

107

162

38

59

95

495

2



Geberit AquaClean 8000plus & 8000 braided hose for installation with UP200 cistern

Application

• For UP200 concealed cistern with top/front actuation• For connecting Geberit AquaClean

Characteristics

• Special production to meet the standard BS 6920


Geberit water supply connection Geberit Sigma concealed cistern 8 cm (UP720), for Geberit AquaClean

Application

• For use with Geberit Sigma concealed cistern 8 cm (UP720), front actuation

• For connecting Geberit AquaClean


Geberit AquaClean 5000 & 5000plus standard connection set New

Application

• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus


Geberit AquaClean 4000, 5000 & 5000plus water supply connection set for UP300 / UP320/ UP720/ Duofix WC frame 1.12 m New

Application

• For connecting Geberit AquaClean enhancement solutions to concealed cistern

• For use with Geberit Duofix, GIS, Kombifix and Sanbloc elements• For concealed cisterns with pre-mounted conduit pipe for the water

supply connection• For connection to Geberit Kappa concealed cistern 15 cm (UP200);

use separate water supply connection set• For connecting Geberit AquaClean complete solutions to Geberit

Duofix Special elements, barrier-free• For connecting Geberit AquaClean complete solutions to Geberit

Duofix Special elements, height-adjustable

Additional NoteAngle stop valve R 1/2"; 2 metal-reinforced hoses R 3/8"; Y-branch; Connection material


Geberit AquaClean 4000, 5000 & 5000plus water supply connection set for UP200 / Duofix WC frame 0.82 cm New

Application


• For UP200 concealed cistern with top/front actuation• For use with installation elements with construction height 82 cm

Additional Note3 metal-reinforced hoses; Angle stop valve R 1/2"; Connection material


Note


Geberit AquaClean connection sets

Article no. PU1

241.819.00.1 1

Article no. PU1

242.413.00.1 1

Article no. PU1 PU2

242.185.00.1 1 5

Article no. PU1

249.801.00.1 1

Article no. PU1

240.634.00.1 1



Geberit AquaClean 4000, 5000 & 5000plus water supply connection set for UP200 / Duofix WC frame 0.98 cm New

Application


• For UP200 concealed cistern with top/front actuation• For installation elements with construction height 98 cm

Additional Note3 metal-reinforced hoses; Angle stop valve R 1/2"; Connection material


Geberit AquaClean 8000plus nozzle cleaner

Application

• For use with Balena 8000• For use with Geberit AquaClean 8000plus

Characteristics

• For approx. 750 uses (400 ml)• Dermatologically tested


Geberit AquaClean 8000plus active carbon filter and nozzle cleaner 1 pcs New

Application



Geberit AquaClean 8000plus active carbon filter and nozzle cleaner 2 pcs New

Application



Note


Article no. PU1

240.635.00.1 1

Geberit AquaClean consumables

Article no. PU1 PU2

242.545.00.1 1 12

Article no. PU1 PU4

240.625.00.1 1 144

Article no. PU1 PU4

240.626.00.1 1 144



Geberit AquaClean cleaning agent New

Application

• For cleaning Geberit AquaClean devices

Characteristics

• Content 500 ml• Can be used immediately and undiluted• Environmentally friendly


Geberit AquaClean cleaning agent with cloth New

Application

• For cleaning Geberit AquaClean devices

Additional NoteGeberit AquaClean cleaning agent; Cleaning cloth


Geberit AquaClean 8000plus active carbon filter

Application



Geberit AquaClean 5000plus active carbon filter set New

Application



Geberit AquaClean 5000plus and 8000plus battery set for remote control New

Application

• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 5000plus

Additional NoteSet of 3


Note


Article no. PU1 PU2

242.546.00.1 1 10

Article no. PU1 PU2

242.547.00.1 1 10

Article no. PU1 PU2

250.022.00.1 1 100

Article no. PU1 PU2

240.116.00.1 1 30

Article no. PU1

147.008.00.1 1



Geberit AquaClean 8000plus set shower and dryer nozzle

Application



Geberit AquaClean 8000plus remote control wall holder

Application



Geberit AquaClean 8000plus remote control

Application


Product Details


Geberit AquaClean 8000 shower nozzle

Application

• For use with Geberit AquaClean 8000


Geberit AquaClean 8000plus & 8000 seat and lid

Application

• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000


Geberit AquaClean 8000plus & 8000 lid

Application



Note


Geberit AquaClean spare parts

Article no. PU1 PU2

242.394.00.1 1 10

Article no. PU1

250.032.00.1 1

Radio frequency 2.4 GHz

Article no. PU1

250.043.00.1 1

Article no. PU1

250.071.00.1 1


250.034.11.1 White alpine 1 5





Geberit AquaClean 8000plus & 8000 seat

Application



Geberit AquaClean 8000plus & 8000 casing

Application



Geberit AquaClean 8000plus & 8000 damper, white

Application



Geberit AquaClean 8000plus & 8000 damper white for seat - right New

Application



Geberit AquaClean 8000plus & 8000 cover - right New

Application



Geberit AquaClean 8000plus & 8000 O-ring for shower arm New

Application



Note





250.029.11.1 White alpine 1 6

Article no. PU1 PU2

250.069.00.1 1 10

Article no. PU1

250.068.00.1 1

Article no. PU1

250.026.00.1 1

Article no. PU1

240.665.00.1 1



Geberit AquaClean 8000plus & 8000 screw for casing New

Application



Geberit AquaClean 8000plus & 8000anti-slip strip set New

Application



Geberit AquaClean 8000plus & 8000 maintenance flap

Application



Geberit AquaClean 8000plus & 8000 acoustic insulation set

Application


Additional NoteSound insulation mat; 2 sleeves


Geberit AquaClean 5000plus remote control New

Application

• For use with Geberit AquaClean 5000plus


Geberit AquaClean 5000plus dryer flap New

Application



Note


Article no. PU1

250.079.11.1 1

Article no. PU1

250.037.11.1 1



Article no. PU1

250.027.00.1 1

Article no. PU1

242.169.11.1 1

Article no. PU1 PU2

242.184.11.1 1 20



Geberit AquaClean 5000plus wall mounted holder for remote control New

Application



Geberit AquaClean 5000 & 5000plus WC seat lid New

Application



Geberit AquaClean 5000 & 5000plus WC seat New

Application



Geberit AquaClean 5000 & 5000plus filter New

Application



Geberit AquaClean 5000 & 5000plus adaptor plate New

Application


Characteristics

• Dowel with clamping range 13–16 mm and 15–18 mm

Additional NoteConnection material; Allen key; 4 dowels


Geberit AquaClean 5000 & 5000plus spray nozzle New

Application



Note


Article no. PU1

240.057.11.1 1

Article no. PU1

242.181.11.1 1

Article no. PU1

242.179.11.1 1

242.180.11.1 1

Article no. PU1 PU2

242.187.00.1 1 10

Article no. PU1

240.495.00.1 1

Article no. PU1

240.226.11.1 1



Geberit AquaClean 5000 & 5000plus cover filter compartment New

Application



Geberit AquaClean 5000 & 5000plus cover for electrical connection New

Application



Geberit AquaClean 5000 & 5000plus hinge set New

Application



Geberit AquaClean 5000 & 5000plus compensation pad set raised New

Application




Geberit AquaClean 5000 & 5000plus compensation pad set New

Application




Geberit AquaClean 5000 & 5000plus pad set for WC lid New

Application



Note


Article no. PU1 PU2

242.182.11.1 1 12

Article no. PU1 PU2

242.183.11.1 1 15

Article no. PU1

242.186.11.1 1

Article no. PU1

241.517.CG.1 1

Article no. PU1

241.516.CG.1 1

Article no. PU1 PU2

242.286.CG.1 1 50



Geberit AquaClean 4000 WC seat

Application



Geberit AquaClean 4000 WC seat lid

Application



Geberit AquaClean 4000 filter New

Application

• For use with Balena 4000• For use with Geberit AquaClean 4000


Geberit AquaClean 4000 securing clip to WC lid New

Application



Geberit AquaClean 4000 pad set for WC lid New

Application

• For use with Balena 4000• For use with Geberit AquaClean 4000


Geberit AquaClean 4000 pin set for WC seat/lid New

Application



Note


Article no. PU1

242.171.11.1 1

242.170.11.1 1

Article no. PU1 PU2

242.172.11.1 1 7

Article no. PU1

147.235.00.1 1

Article no. PU1

242.178.11.1 1

Article no. PU1

147.231.00.1 1

Article no. PU1

242.175.00.1 1



Geberit AquaClean 4000 O-ringset for spray arm New

Application

• For use with Geberit AquaClean 4000• For use with Balena 4000


Geberit AquaClean 4000 compensation pad set raised New

Application



Geberit AquaClean 4000 compensation pad set New

Application



Geberit AquaClean 4000 spray nozzle with 3 holes New

Application

• For use with Geberit AquaClean 4000• For use with Geberit AquaClean 4000


Geberit AquaClean 4000 spray nozzle with 5 holes New

Application

• For use with Geberit AquaClean 4000• For use with Geberit AquaClean 4000


Geberit AquaClean 4000, 5000 & 5000plus fastening set New


Geberit AquaClean waterstream cover

Application

• For use with Geberit AquaClean 4000• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus• For use with Geberit AquaClean 8000• For use with Geberit AquaClean 8000plus


Note


Article no. PU1

242.176.00.1 1

Article no. PU1

242.174.00.1 1

Article no. PU1

242.173.00.1 1

Article no. PU1 PU2

242.377.00.1 1 100

Article no. PU1 PU2

242.376.00.1 1 100

Article no. PU1

849.825.00.1 1


813.224.15.0 Glass clearly 1

SparesDuofix WC frames Spares


Buy spares direct on 01789 842127

SparesDuofix WC frames

111.383.00.5 Duofix WC frame 1.12 m with UP320 for Sigma flush plates - PreWall111.384.00.5 Duofix WC frame 1.12 m with UP320 for Sigma flush plates


Duofix WC frames

Pos. Article no. Description

1 241.869.00.1 Mounting accessories

2 241.824.00.1 Inner cover

3 241.826.00.1 Protection housing

4 362.771.00.1 Seal for flush pipe

5 362.796.92.1 Protection cover for flush pipe

6 240.189.00.1 Threaded rod (pr)

7 152.426.46.1 WC Connection Set

7.1 152.426.11.1 WC Connection Set

7.2 217.713.46.1 Chrome Caps & Washers Gloss

7.3 119.668.00.1 Flush pipe seal

7.4 152.424.00.1 Rubber collar

8 366.061.16.1 90 mm HDPE 90 Degree bend

8.1 387.282.00.1 Collar for outlet bend

9 366.820.92.1 Protection cover

10 367.928.16.1 90/110 mm Adaptor

11 242.012.00.1 Complete pipe bracket

11.1 242.017.00.1 Pipe bracket clip

12 242.010.00.1 Conduit pipe for shower toilet water supply

13 111.892.00.1 Hexagonal self tapping screws

14 240.269.00.1Water supply connection R 1/2" with integrated angle stop valve

14.1 240.298.00.1 Spindle for isolation valve

14.2 240.347.00.1 Hand wheel

14.3 241.857.00.1 Nut for isolation valve

15 241.982.00.1 Stainless steel connection hose

15.1 240.922.00.1 EPDM O Ring 7.5 x 1.5 mm / 19 x 2 mm

16 240.923.00.1 Connection clip for fill valve

17 240.705.00.1 Side fill valve for Duofix

17.1 240.771.00.1 Diaphragm for side fill valve

18 241.858.00.1 Complete flush valve with basket

19 240.622.00.1 Complete flush valve

19.1 241.167.00.1 Clip set for flush valves

19.2 816.418.00.1 Flush valve seal

20 241.859.00.1 Basket for flush valve

20.1 241.868.00.1 Seal for basket

21 241.829.00.1 Cradle assembly for push rods

816.418

10

4

2

1

3

5

98.1

12

11.1

14.3

14.114.2

7.2

15

15.1

2113

1617

17.1

19.2

18

19

19.1

20

20.113

14

11

87.1

7

7.3

6


SparesSpares Duofix WC frames


111.383.00.1 Duofix WC frame 1.12 m with UP300 cistern - PreWall 111.384.00.1 Duofix WC frame 1.12 m with UP300 cistern



1 240.930.00.1 Inner cover







6.1 240.922.00.1 EPDM O Ring 7.5 x 1.5mm / 19 x 2mm

7 240.177.00.1 Servicing (stop) valve





8.2 240.927.00.1 Part flush rod for valve


8.4 240.695.00.1 Holder for flush valve


9.1 240.282.00.1 Seal for basket






14 240.189.00.1 Threaded rod (pr)

15 366.061.16.1 90mm HDPE 90 degree bend

16 367.928.16.1 90/110mm Adaptor

17 152.426.46.1 WC connection set

17.1 217.713.46.1 Chrome caps & washers

17.2 152.434.06.1 WC flush pipe connector & collar

17.3 119.668.00.1 Flush pipe seal

17.4 152.424.00.1 Rubber collar

17.5 152.425.46.1 Pan connector

SparesDuofix WC frames Spares



111.242.00.1 Duofix WC frame 0.82 m with UP200 cistern - PreWall 111.292.00.1 Duofix WC frame 0.98 m with UP200 cistern - PreWall



1 240.206.00.1 Inner cover



4 240.269.00.1 Servicing (stop) valve complete

4.1 240.347.00.1 Knob for isolation valve



5 240.705.00.1 Side fill valve





8 240.638.00.1 Flush valve






12 240.189.00.1 Threaded rod (pr)





14.2 119.668.00.1 Flush pipe seal

14.3 152.424.00.1 Rubber collar

15 366.061.16.1 90 mm HDPE 90 degree bend

15.1 387.282.00.1 90 mm seal

16 366.820.92.1 Protection cover

17 367.928.16.1 90/110 mm Adaptor


55.1

4

4.34.1 4.2

1

2

3

11

12

12

17

9

8

7

8.1

9.1

15

16

15.1

18

18

13

13.1

10

6

6.1

14

14.3

14.2

14.1


SparesSpares Duofix WC frames


111.253.00.1 WC frame 0.88 m - PreWall 111.254.00.1 WC frame 0.82 m - PreWall



1 240.206.00.1 Inner cover







6 240.177.00.1 Servicing (stop) valve for Duofix II



7 240.122.00.1 Complete flush valve for 0.82/0.88 cistern









13 240.189.00.1 Threaded rods (pair)

14 366.061.16.1 90 mm HDPE 90 degree bend

15 367.928.16.1 90/110mm Adaptor



16.2 152.434.06.1 WC flush pipe connector & collar

16.3 119.668.00.1 Flush pipe seal

16.4 152.424.00.1 Rubber collar

16.5 152.425.46.1 Pan connector

SparesConcealed cisterns Spares



Concealed cisterns

109.309.00.5 Concealed dual flush cistern UP320


Concealed cisterns





3 241.858.00.1 Complete flush valve with basket







7 241.824.00.1 Inner cover


9 241.378.00.1 Concealed flush pipe fixing set

10 119.652.16.1 Concealed flush pipe

10.1 362.771.00.1 Seal for flush pipe ø 45 mm

10.2 362.796.92.1 Protection cover for flush pipe

11 892.975.00.1 O Ring seal

12 889.711.00.1 Fixing slider

13 465.027.00.1 Wall brackets and screws (pair)


15 240.269.00.1Water supply connection R 1/2“ with integrated angle stop valve

15.1 240.347.00.1 Hand wheel



816.418

11

10.210.1

15

15.115.2

15.3

1 2

8

10

7

2.1

4.2

3

4

4.1

5

5.1

14

6

9

13

12

13


SparesSpares Concealed cisterns





1 240.930.00.1 Inner cover







7 240.177.00.1 Servicing (stop) valve





8.2 240.927.00.1 Part flush rod for valve


8.4 240.695.00.1 Holder for flush valve



10 892.975.00.1 O Ring seal

11 119.652.16.1 Concealed flush pipe

11.1 362.771.00.1 Seal for flush pipe

11.2 362.796.92.1 Protection cover for flush pipe


13 465.027.00.1 Wall brackets and screws (pair)

14 152.434.06.1 WC flush pipe connector and collar

14.1 119.668.00.1 Flush pipe seal

SparesConcealed cisterns Spares





123.137.11.1 Concealed single flush cistern AP123



1 240.206.00.1 Inner cover



4 240.269.00.1 Servicing (stop) valve complete

4.1 240.347.00.1 Knob for isolation valve








8 240.638.00.1 Flush valve

8.1 241.167.00.1 Clip set for flush valve







13 152.434.06.1 WC flush pipe connector and collar

13.1 119.668.00.1 Flush pipe seal


1 890.240.11.1 Cover



3 240.573.00.1 Pneumatic actuation unit single flush

4 240.576.00.1 Flush valve


5 256.000.00.1 Air hose 3.5m

6 118.006.11.1 Flush bend

7 119.668.00.1 Flush seal for pan

Not Illustrated

294.802.00.1 Wall brackets

240.139.00.1 Seal kit


SparesSpares Concealed cisterns


109.720.00.1 Concealed dual flush cistern for low height furniture109.721.00.1 Concealed single flush cistern low height furniture


109.722.00.1 Mechanical operated concealed dual flush cistern for low height furniture - plastic button109.723.00.1 Mechanical operated concealed dual flush cistern for low height furniture - metal button



1 281.206.00.1 Bottom fill valve

1.1 241.813.00.1 Seal set for bottom fill valve

2 241.415.00.1 Flush valve


3 240.574.00.1 Pneumatic actuation unit*

4 241.414.00.1 Cover plate/lid

5 241.413.21.1 Dual flush button*

6 240.575.00.1 Double air hose*

7 119.705.93.1 Flush bend

8 119.668.00.1 Flush seal for pan

*Dual flush only.

For single flush:

240.573.00.1 Pneumatic actuation unit

256.000.00.1 Air hose 3.5m

Not Illustrated

240.139.00.1 Seal kit


1 281.206.00.1 Bottom fill valve

1.1 241.813.00.1 Seal set for bottom fill valve

2 241.415.00.1 Flush Valve


3 241.976.00.1 Mechanical actuation unit

4 241.414.00.1 Cover plate/lid

5 119.705.93.1 Flush bend

5.1 119.668.00.1 Flush seal for pan

6 241.978.21.1

Dual flush button, plastic

241.978.21.Z Dual flush button, galvanized

7 241.979.00.1

Counter nut

Not Illustrated

240.139.00.1 Seal kit

WL

CL

4

2

1

1.1

2.1

3

6

7

5 5.1

SparesWC flush plates Spares



WC flush plates

115.778.XX.1 Sigma20 dual flush plate for UP320115.788.XX.1 Sigma50 dual flush plate for UP320


115.758.XX.1 Sigma10 single flush plate for UP320


WC flush plates


1 241.876.00.1 Flush plate fixing frame for tool-free installation

2 241.874.00.1Push rods and distance rods for tool-free installation

3 240.938.00.1 Extension set

4 241.295.00.1 Spring

Note: Samba, Bolero, Twist compatible after 1st April 2008


1 241.876.00.1 Flush plate fixing frame

2 241.874.00.1Push rods and distance rods for tool-free installation

3 240.938.00.1 Extension set

Note: Rumba, Mambo and Tango compatible after 1st April 2008

2

2

2

2

1

3

4 4 4 4

2

2 1

2

3


SparesSpares WC flush plates


115.770.XX.1 Samba dual flush plate115.777.XX.1 Bolero dual flush plate115.780.XX.1 Twist dual flush plate115.782.XX.1 Twist dual flush plate anti vandal


115.750.XX.1 Rumba single flush plate115.751.XX.1 Mambo single flush plate115.760.XX.1 Tango single flush plate



1 813.514.00.1 Spring


2.1 240.934.00.1 Push rod locking piece

3 240.936.00.1 Push rods (pair)

4 240.173.00.1 Distance rods (pair)

5 240.930.00.1 Inner cover

Note: For post May 2008 installation please use Sigma spares list


1 813.514.00.1 Spring


2.1 240.933.00.1 Push rod locking piece

3 240.936.00.1 Push rods (pair)


5 240.930.00.1 Inner cover

Note: For post May 2008 installation please use Sigma spares list

SparesWC flush plates Spares



115.228.XX.1 Kappa20 dual flush plate115.260.XX.1 Kappa50 dual flush plate


115.666.XX.1 Artline dual flush plate



1 241.295.00.1 Spring

2 240.639.00.1 Push rods and distance rods (pair)


4 240.206.00.1 Inner cover

5 240.938.00.1 Extension set (order separately)


1 813.514.00.1 Spring

2 240.207.00.1 Push rods (pair)



5 240.206.00.1 Inner cover

Note: For post 2006 Artline installation please use the Kappa spares list

4

2

2

32

11

5


SparesSpares


111.623.00.1 Duofix urinal frame111.622.00.1 Duofix urinal frame with pipe interruptor


116.001.00.1 Urinal installation set universal116.003.00.1 Urinal installation set with flush pipe




1 242.195.00.1 Hose R8 for inlet UR-element

2 242.039.00.1 Crossbar for water supply 32 mm

3 152.489.16.1 Inlet connector & collar

4 242.045.00.1 Fixation rods complete

4.1 242.046.00.1 Plastic nut for urinal fastening

5 240.027.46.1 Chrome caps & washers

6 242.210.00.1 Cross bar metal for urinal element for outlet

7 152.950.11.1 Urinal trap

7 152.983.00.1 Urinal trap

8 240.306.00.1 Protection plug

9 240.315.00.1 Urinal outlet bend complete

9.1 152.693.00.1 Rubber collar reducer 63x50

10 242.516.00.1 Geberit straight connector, PVC d50


12see 116.001.00.1 Urinal installation set universal


1 242.130.00.1 Connection nipple urinal straight

2 242.131.00.1 Connection nipple urinal bent

3 241.934.00.1 Stop valve with throttle, complete

3.1 241.933.00.1 Regulating screw

4 241.930.00.1 Protection cover with protection cover lid

5 241.947.00.1 Insulation protection with connection terminal

6 242.156.00.1 Lip seal flushing pipe

9

12

10

9.1

6

2

5

4.1 4

8

3

11

11 1

7

4

12

5

6

3.1

3

SparesFill and flush valves for ceramic cisterns Spares



111.674.00.1 Duofix urinal frame111.667.00.1 Duofix urinal frame with pipe interruptor



240.700.00.1 Impuls380 side fill valve240.705.00.1 Impuls380 side fill valve



1 240.534.00.1 Protection housing cover


3 240.517.00.1 Water part

3.1 241.060.00.1 Filter case & isolation valve

3.2 240.520.00.1 Filter

3.3 240.871.00.1 Flat seal

4 240.518.00.1 Dummy cover with seal

5 241.061.00.1 Complete nipple

6 240.522.00.1 Electrical isolation cover

7 242.516.00.1 Geberit straight connector, PVC d50

7.1 152.693.00.1 Rubber collar reducer 63x50

8 240.306.00.1 Protection plug

9 152.983.00.1 Urinal trap

10 240.027.46.1 Chrome caps & washers

11 242.045.00.1 Fixation rods complete

11.1 242.046.00.1 Plastic nut for urinal fastening

12 152.489.16.1 Inlet connector & collar

13 242.041.00.1 Crossbar for water supply di 32mm

14 242.047.00.1 Crossbar for drainage


16 242.005.00.1 Inlet hose for urinal frame

17 115.801.00.1 Universal urinal housing



1 240.771.00.1 Diaphragm assembly

2 261.358.00.1 Stainless steel connection hose 3/8"



SparesSpares Fill and flush valves for ceramic cisterns


281.206.00.1 Impuls360 bottom fill valve


Impuls280 dual flush valve blue square design



1 241.813.00.1 Seal set


1 241.800.KD.1 Flush button

2 241.801.00.1 Basket

2.1 240.278.00.1 Overflow pipe

3 816.418.00.1 Flush valve seal

4 261.630.00.1 Connection set

4.1 241.350.00.1 Connection washer


Installation GuideWaste and drainage connection Urinal

Numerical index


Article no. Page

107.35.05B 65

107.35.14B 65

107.35.24B 65

107.35.34B 65

109.200.00.1 10

109.211.00.1 11

109.309.00.5 9

109.720.00.1 12

109.772.00.1 10

111.242.00.1 5

111.292.00.1 5

111.352.00.5 8

111.383.00.5 3

111.384.00.5 4

111.399.00.5 7

111.493.00.1 28

111.494.00.1 27

111.495.00.1 27

111.543.00.1 43

111.544.00.1 42

111.545.00.1 42

111.622.00.1 44

111.623.00.1 45

111.706.00.1 6

111.729.00.1 6

111.731.00.1 72

111.743.00.1 72

111.790.00.1 8

111.830.00.1 57

111.835.00.1 59

111.843.00.1 59

111.844.00.1 59

111.847.00.1 58

111.859.00.1 46

111.867.00.1 58

111.868.00.1 58

111.869.00.1 58

111.871.00.1 57

111.872.00.1 57

111.873.00.1 57

111.874.00.1 57

111.878.00.1 57

111.887.00.1 59

111.889.00.1 60

111.892.00.1 97

111.892.00.1 98

111.892.00.1 99

111.892.00.1 100

111.892.00.1 108

111.892.00.1 109

115.075.21.1 23

115.075.21.Z 24

115.114.11.1 21

115.114.21.1 21

115.200.11.1 46

115.210.CD.1 47

115.210.GT.1 47

115.214.CD.1 47

115.214.GT.1 47

115.228.10.1 19

115.228.11.1 19

115.228.21.1 19

115.228.46.1 19

115.228.CG.1 19

115.228.DK.1 19

115.228.DT.1 19

115.228.DW.1 19

115.228.EP.1 19

115.228.FB.1 19

115.228.FR.1 19

115.228.GM.1 19

115.228.KB.1 19

115.240.KH.1 19

115.240.KJ.1 19

115.240.KK.1 19

115.240.KL.1 19

115.240.KM.1 19

115.240.KN.1 19

115.258.00.1 19

115.260.11.1 19

115.260.21.1 19

115.260.46.1 19

115.260.HC.1 19

115.322.11.1 85

115.323.11.1 84

115.324.SF.1 85

115.324.SG.1 85

115.325.SF.1 84

115.325.SG.1 84

115.612.00.1 17

115.666.11.1 18

115.666.21.1 18

115.666.46.1 18

115.680.11.1 19

115.680.21.1 19

115.723.21.1 30

115.725.21.1 31

115.733.21.1 29

115.738.21.1 29

115.739.21.1 30

115.740.21.1 28

115.750.11.1 18

115.750.21.1 18

115.750.46.1 18

115.750.KB.1 18

115.751.00.1 18

115.758.KH.1 14

115.758.KJ.1 14

115.758.KK.1 14

115.758.KL.1 14

115.758.KM.1 14

115.758.KN.1 14

Article no. Page

115.760.11.1 18

115.760.21.1 18

115.760.45.1 18

115.760.46.1 18

115.760.DT.1 18

115.760.GM.1 18

115.760.HC.1 18

115.760.KA.1 18

115.765.46.1 20

115.770.10.1 17

115.770.11.1 17

115.770.21.1 17

115.770.46.1 17

115.770.CG.1 17

115.770.DK.1 17

115.770.DT.1 17

115.770.DW.1 17

115.770.EP.1 17

115.770.FB.1 17

115.770.FR.1 17

115.770.GM.1 17

115.770.KB.1 17

115.777.10.1 17

115.777.11.1 17

115.777.21.1 17

115.777.46.1 17

115.777.CG.1 17

115.777.DK.1 17

115.777.DT.1 17

115.777.DW.1 17

115.777.EP.1 17

115.777.FB.1 17

115.777.FR.1 17

115.777.GM.1 17

115.777.KB.1 17

115.778.KH.1 14

115.778.KJ.1 14

115.778.KK.1 14

115.778.KL.1 14

115.778.KM.1 14

115.778.KN.1 14

115.785.00.1 15

115.785.11.1 16

115.785.DW.1 16

115.785.EP.1 16

115.785.GH.1 15

115.785.SC.1 16

115.785.SD.1 16

115.785.SE.1 16

115.788.00.1 14

115.788.11.1 15

115.788.DW.1 15

115.788.EP.1 15

115.788.GH.1 15

115.788.SC.1 14

115.788.SD.1 14

Article no. Page

115.788.SE.1 14

115.792.GH.1 16

115.798.00.1 20

115.801.00.1 109

115.831.00.1 60

115.832.00.1 109

115.855.00.1 25

115.857.00.1 26

115.857.21.1 26

115.860.00.1 60

115.890.00.1 25

115.891.00.1 26

115.918.00.1 24

115.939.00.1 24

115.941.11.1 23

115.941.KA.1 23

115.942.11.1 23

115.942.KA.1 23

115.943.21.1 22

115.947.00.1 21

115.947.21.1 21

115.949.21.1 22

115.999.21.1 23

116.001.00.1 45

116.003.00.1 46

116.011.11.1 51

116.011.21.1 51

116.011.46.1 51

116.012.11.1 52

116.012.21.1 52

116.012.46.1 52

116.013.FW.1 54

116.014.11.1 55

116.014.21.1 55

116.014.46.1 55

116.015.KH.1 47

116.015.KJ.1 47

116.015.KK.1 47

116.015.KL.1 47

116.015.KM.1 47

116.015.KN.1 47

116.016.00.1 49

116.016.11.1 49

116.016.DW.1 49

116.016.EP.1 49

116.016.SC.1 49

116.016.SD.1 49

116.016.SE.1 49

116.021.11.1 51

116.021.21.1 51

116.021.46.1 51

116.022.11.1 53

116.022.21.1 53

116.022.46.1 53

116.023.FW.1 54

116.024.11.1 56

Article no. Page


Numerical index

116.024.21.1 56

116.024.46.1 56

116.025.KH.1 48

116.025.KJ.1 48

116.025.KK.1 48

116.025.KL.1 48

116.025.KM.1 48

116.025.KN.1 48

116.026.GH.1 50

116.031.11.1 52

116.031.21.1 52

116.031.46.1 52

116.032.11.1 53

116.032.21.1 53

116.032.46.1 53

116.033.FW.1 55

116.034.11.1 56

116.034.21.1 56

116.034.46.1 56

116.035.KH.1 48

116.035.KJ.1 48

116.035.KK.1 48

116.035.KL.1 48

116.035.KM.1 48

116.035.KN.1 48

116.036.GH.1 50

116.107.21.1 38

116.108.21.1 39

116.117.21.1 39

116.118.21.1 40

116.127.21.1 38

116.128.21.1 40

116.135.21.1 32

116.136.21.1 35

116.145.21.1 34

116.146.21.1 37

116.155.21.1 33

116.156.21.1 36

116.235.21.1 32

116.236.21.1 35

116.245.21.1 34

116.246.21.1 37

116.255.21.1 33

116.256.21.1 36

118.006.11.1 103

119.652.16.1 101

119.652.16.1 102

119.668.00.1 97

119.668.00.1 98

119.668.00.1 99

119.668.00.1 100

119.668.00.1 102

119.668.00.1 103

119.668.00.1 103

119.668.00.1 104

119.668.00.1 104

Article no. Page

119.705.93.1 104

119.705.93.1 104

123.137.11.1 11

131.002.SI.1 13

131.002.SJ.1 13

131.002.SK.1 13

131.021.SI.1 12

131.021.SJ.1 12

131.021.SK.1 12

131.023.SI.1 13

131.023.SJ.1 13

131.074.00.1 61

131.082.16.1 67

131.083.16.1 66

131.085.11.1 67

131.088.29.1 66

131.104.00.1 60

131.105.00.1 61

131.108.11.1 67

146.114.11.1 81

146.122.11.1 82

146.132.11.1 83

146.181.11.1 80

147.008.00.1 88

147.231.00.1 94

147.235.00.1 94

150.247.00.1 71

150.535.21.1 68

150.536.21.1 68

150.679.21.1 71

150.688.21.1 71

150.712.21.1 69

150.713.21.1 69

150.770.11.1 70

150.770.21.1 70

150.771.11.1 70

150.771.21.1 70

150.772.11.1 71

150.772.21.1 71

151.039.21.1 67

152.170.16.1 66

152.424.00.1 97

152.424.00.1 98

152.424.00.1 99

152.424.00.1 100

152.425.46.1 98

152.425.46.1 100

152.426.11.1 97

152.426.46.1 97

152.426.46.1 98

152.426.46.1 99

152.426.46.1 100

152.434.06.1 98

152.434.06.1 100

152.434.06.1 102

152.434.06.1 103

Article no. Page

152.438.46.1 65

152.489.16.1 108

152.489.16.1 109

152.693.00.1 108

152.693.00.1 109

152.950.11.1 108

152.983.00.1 108

152.983.00.1 109

154.005.00.1 74

154.100.00.1 75

154.101.00.1 75

154.102.00.1 75

154.103.00.1 75

154.105.00.1 76

154.106.00.1 76

154.107.00.1 76

154.108.00.1 76

154.130.00.1 75

154.131.00.1 75

154.135.00.1 76

154.136.00.1 76

154.299.00.1 76

154.300.00.1 74

154.301.00.1 74

154.302.00.1 74

154.303.00.1 74

154.304.00.1 75

154.305.00.1 75

154.306.00.1 75

154.330.00.1 73

154.330.11.1 73

154.330.21.1 73

154.330.FW.1 73

154.350.00.1 76

154.351.00.1 76

154.352.00.1 76

154.353.00.1 76

154.354.00.1 76

154.355.00.1 76

154.356.00.1 76

154.357.00.1 76

154.360.00.1 76

154.361.00.1 76

154.362.00.1 76

154.363.00.1 76

156.050.00.1 9

156.051.00.1 28

180.101.11.1 79

217.713.46.1 97

217.713.46.1 98

217.713.46.1 99

217.713.46.1 100

240.027.46.1 108

240.027.46.1 109

240.057.11.1 92

240.079.00.1 100

Article no. Page

240.116.00.1 88

240.122.00.1 100

240.139.00.1 103

240.139.00.1 104

240.139.00.1 104

240.172.00.1 99

240.172.00.1 100

240.172.00.1 103

240.173.00.1 106

240.173.00.1 106

240.173.00.1 107

240.177.00.1 98

240.177.00.1 100

240.177.00.1 102

240.189.00.1 97

240.189.00.1 98

240.189.00.1 99

240.189.00.1 100

240.206.00.1 99

240.206.00.1 100

240.206.00.1 103

240.206.00.1 107

240.206.00.1 107

240.207.00.1 107

240.226.11.1 92

240.269.00.1 97

240.269.00.1 99

240.269.00.1 101

240.269.00.1 103

240.278.00.1 110

240.282.00.1 98

240.282.00.1 99

240.282.00.1 100

240.282.00.1 102

240.282.00.1 103

240.298.00.1 97

240.298.00.1 99

240.298.00.1 101

240.298.00.1 103

240.306.00.1 108

240.306.00.1 109

240.315.00.1 108

240.347.00.1 97

240.347.00.1 99

240.347.00.1 101

240.347.00.1 103

240.417.00.1 98

240.417.00.1 99

240.495.00.1 92

240.500.00.1 100

240.517.00.1 109

240.518.00.1 109

240.520.00.1 109

240.522.00.1 109

240.533.00.1 99

240.533.00.1 103

Article no. Page

Numerical index


240.534.00.1 109

240.573.00.1 103

240.573.00.1 104

240.574.00.1 104

240.575.00.1 104

240.576.00.1 103

240.623.00.1 99

240.622.00.1 97

240.622.00.1 98

240.622.00.1 101

240.622.00.1 102

240.623.00.1 98

240.623.00.1 100

240.623.00.1 102

240.623.00.1 103

240.625.00.1 87

240.626.00.1 87

240.634.00.1 81

240.634.00.1 82

240.634.00.1 83

240.634.00.1 86

240.635.00.1 81

240.635.00.1 82

240.635.00.1 83

240.635.00.1 87

240.637.00.1 99

240.637.00.1 103

240.638.00.1 99

240.638.00.1 103

240.639.00.1 107

240.646.00.1 107

240.646.00.1 107

240.665.00.1 90

240.695.00.1 98

240.695.00.1 102

240.700.00.1 77

240.700.00.1 103

240.705.00.1 97

240.705.00.1 98

240.705.00.1 99

240.705.00.1 100

240.705.00.1 101

240.705.00.1 102

240.705.00.1 103

240.771.00.1 97

240.771.00.1 98

240.771.00.1 99

240.771.00.1 100

240.771.00.1 101

240.771.00.1 102

240.771.00.1 103

240.771.00.1 103

240.771.00.1 109

240.846.00.1 99

240.846.00.1 103

240.846.00.1 109

Article no. Page

240.871.00.1 109

240.922.00.1 97

240.922.00.1 98

240.922.00.1 99

240.922.00.1 100

240.922.00.1 103

240.923.00.1 97

240.923.00.1 98

240.923.00.1 101

240.923.00.1 102

240.925.00.1 98

240.925.00.1 100

240.925.00.1 102

240.927.00.1 98

240.927.00.1 102

240.928.00.1 98

240.928.00.1 99

240.928.00.1 102

240.928.00.1 103

240.929.00.1 98

240.929.00.1 102

240.930.00.1 98

240.930.00.1 102

240.930.00.1 106

240.930.00.1 106

240.931.00.1 98

240.931.00.1 102

240.933.00.1 106

240.934.00.1 106

240.935.00.1 106

240.935.00.1 106

240.936.00.1 106

240.936.00.1 106

240.938.00.1 20

240.938.00.1 105

240.938.00.1 105

240.938.00.1 107

240.972.00.1 98

240.972.00.1 99

240.972.00.1 100

241.016.00.1 100

241.060.00.1 109

241.061.00.1 109

241.144.00.1 22

241.167.00.1 97

241.167.00.1 98

241.167.00.1 100

241.167.00.1 101

241.167.00.1 102

241.198.00.1 21

241.198.21.1 21

241.199.11.1 21

241.199.21.1 21

241.282.21.1 22

241.295.00.1 105

241.295.00.1 107

Article no. Page

241.350.00.1 110

241.378.00.1 101

241.378.00.1 102

241.378.00.1 103

241.413.21.1 104

241.414.00.1 104

241.414.00.1 104

241.415.00.1 104

241.415.00.1 104

241.516.CG.1 93

241.517.CG.1 93

241.631.00.1 41

241.672.00.1 41

241.692.00.1 31

241.800.KD.1 110

241.801.00.1 110

241.813.00.1 104

241.813.00.1 104

241.813.00.1 110

241.819.00.1 79

241.819.00.1 80

241.819.00.1 86

241.824.00.1 97

241.824.00.1 101

241.826.00.1 97

241.826.00.1 101

241.829.00.1 97

241.829.00.1 101

241.857.00.1 97

241.857.00.1 101

241.858.00.1 97

241.858.00.1 101

241.859.00.1 97

241.859.00.1 101

241.868.00.1 97

241.868.00.1 101

241.869.00.1 97

241.874.00.1 105

241.874.00.1 105

241.876.00.1 105

241.876.00.1 105

241.894.00.1 60

241.930.00.1 108

241.933.00.1 108

241.934.00.1 108

241.947.00.1 108

241.976.00.1 104

241.978.21.1 104

241.978.21.Z 104

241.979.00.1 104

241.982.00.1 97

241.982.00.1 98

241.982.00.1 101

241.982.00.1 102

242.005.00.1 109

242.010.00.1 97

Article no. Page

242.012.00.1 97

242.017.00.1 97

242.039.00.1 108

242.041.00.1 109

242.045.00.1 108

242.045.00.1 109

242.046.00.1 108

242.046.00.1 109

242.047.00.1 109

242.130.00.1 108

242.131.00.1 108

242.156.00.1 108

242.169.11.1 91

242.170.11.1 94

242.171.11.1 94

242.172.11.1 94

242.173.00.1 95

242.174.00.1 95

242.175.00.1 94

242.176.00.1 95

242.178.11.1 94

242.179.11.1 92

242.180.11.1 92

242.181.11.1 92

242.182.11.1 93

242.183.11.1 93

242.184.11.1 91

242.185.00.1 86

242.186.11.1 93

242.187.00.1 92

242.195.00.1 108

242.210.00.1 108

242.286.CG.1 93

242.310.00.1 60

242.376.00.1 95

242.377.00.1 95

242.394.00.1 89

242.413.00.1 86

242.516.00.1 108

242.516.00.1 109

242.544.GH.1 16

242.545.00.1 87

242.546.00.1 88

242.547.00.1 88

249.801.00.1 81

249.801.00.1 82

249.801.00.1 83

249.801.00.1 86

250.022.00.1 88

250.026.00.1 90

250.027.00.1 91

250.029.11.1 90

250.030.11.1 91

250.032.00.1 89

250.034.11.1 89

250.037.11.1 91

Article no. Page


Numerical index

250.043.00.1 89

250.066.11.1 90

250.067.11.1 89

250.068.00.1 90

250.069.00.1 90

250.071.00.1 89

250.079.11.1 91

256.000.00.1 103

256.000.00.1 104

261.157.00.1 77

261.358.00.1 109

261.630.00.1 110

281.206.00.1 77

281.206.00.1 104

281.206.00.1 104

282.350.KD.1 78

294.802.00.1 103

362.771.00.1 97

362.771.00.1 98

362.771.00.1 99

362.771.00.1 100

362.771.00.1 101

362.771.00.1 102

362.771.00.1 103

362.796.92.1 97

362.796.92.1 98

362.796.92.1 99

362.796.92.1 100

362.796.92.1 101

362.796.92.1 102

362.796.92.1 103

366.061.16.1 63

366.061.16.1 97

366.061.16.1 98

366.061.16.1 99

366.061.16.1 100

366.820.92.1 97

366.820.92.1 99

366.887.16.1 62

367.792.16.1 63

367.887.16.1 62

367.928.16.1 64

367.928.16.1 97

367.928.16.1 98

367.928.16.1 99

367.928.16.1 100

367.945.16.1 64

387.282.00.1 97

387.282.00.1 99

388.350.29.1 62

461.030.00.1 59

465.027.00.1 101

465.027.00.1 102

616.030.00.1 41

813.224.15.0 95

813.514.00.1 106

Article no. Page

813.514.00.1 106

813.514.00.1 107

816.418.00.1 97

816.418.00.1 98

816.418.00.1 99

816.418.00.1 100

816.418.00.1 101

816.418.00.1 102

816.418.00.1 103

816.418.00.1 103

816.418.00.1 104

816.418.00.1 104

816.418.00.1 110

849.825.00.1 95

889.711.00.1 101

890.240.11.1 103

892.975.00.1 101

892.975.00.1 102

F107.35.09B 65

F107.35.18B 65

F107.35.29B 65

Article no. Page

product guide - johnnichollstrade.co.uk · insert for adding in-cistern blocks compatible with...

Documents