product guide - first class wet rooms€¦ · traps page 80 fill and flush valves for ceramic...

Product and Installation Guide Washroom & Bathroom 2012 1

Product Guide

Duofix WC frames Page 3

Concealed cisterns Page 10

WC flush plates Page 13

Remote flushing kits 1

Monolith Sanitary Modules Page 28

Duofix basin frames Page 39

Taps Page 40

Duofix bidet frames Page 55

Duofix urinal frames Page 57

Accessories Page 70

Drainage Page 75

Traps Page 80

Fill and flush valves for ceramic cisterns Page 89

Geberit AquaClean Page 91

Spares Page 106

Installation Guide

Main methods of Duofix installation Page 115

Waste and drainage connection Page 121

Numerical Index Page 124

2 Product and Installation Guide Washroom & Bathroom 2012

Product Guide

Compatibility - Flush plates and buttons

Flush plates

Sigma concealed

cistern 12 cm

Sigma concealed

cistern 8 cm

Kappa concealed

cistern 15 cm

Exposed cistern

type 123

Sigma10 Rumba Tango Mambo

✓ ✓

Sigma01 Sigma20 Sigma50 Sigma60 Bolero

✓ ✓

Mambo touchless Sigma 80 115.890.00.1115.891.00.1 116.090.xx.1

115.855.00.1116.091.xx.1

Large Access Cover Plate

✓ ✓

Kappa20 Kappa21 Kappa50

✓

Small Access Cover Plate

✓

Geberit single flush buttonsShort wall palm 115.114.xx.1241.199.xx.1

Long wall finger241.144.00.1

Short wall finger115.947.xx.1.xx.1

Long wall finger115.943.21.1

Short wall palm 115.949.21.1241.282.21.1

Palm push 115.941.xx.1

115.114.xx.1115.947.xx.1115.949.21.1115.943.21.1115.941.xx.1

115.114.xx.1115.947.xx.1115.949.21.1115.943.21.1115.941.xx.1

241.199.xx.1241.198.xx.1241.282.21.1241.144.00.1115.941.xx.1

Geberit dual flush buttonsHand push115.942.xx.1

Finger push115.999.21.1

Finger push115.075.21.x

115.942.xx.1 115.075.21.x 115.942.xx.1

Geberit touchless buttonsSensor flush 115.857.xx.1

Insert for in-cistern blocks115.612.00.1

Insert for adding in-cistern blocks compatible with Geberit’s Sigma01, 10, 20 and 50 range of flush plates

Product GuideDuofix WC frames


Duofix WC frames

Geberit Duofix frame for wall-hung WC, H112, with Sigma cistern 12 cm (UP320)

Application

• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres

• For installation in a room-height Duofix system wall in front of a solid or drywall construction

• For mounting in front of a solid or drywall construction• For a screed of 0 - 200 mm (not in room height applications)• For connecting Geberit AquaClean

Characteristics

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• With wall brackets to allow up to a 200 mm duct. For larger ducts up

to 400 mm use extension bolts 111.887.00.1• Tool-free fastening for outlet bend, sound-absorbing, adjustable in

depth with 8 positions, adjustable range 45 mm• Connection hose to angle stop valve can be screwed without tools• Water supply connection at centre back or at the top• Geberit Sigma concealed cistern 12 cm (UP320) with front actuation• Dual flush with Sigma80, Sigma60, Sigma50, Sigma20, Sigma01 or

Bolero flush plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Dual flush with pneumatic button• Single flush with touchless flush or pneumatic buttons• The protection cover protects the service opening against moisture

and dirt and can be mounted without tools and cut to length• Universal water supply connection compatible with MeplaFix, can be

mounted and operated without tools• Self-locking feet for tool-free alignment of the frame, (friction feet have

to be locked with spanner)• For pans with contact surfaces smaller than 170 mm (see accessory

111.847.00.1)• Flush valve features settings to enable either a 6l and 3l flush or a 4.5l

and 3l flush. For flush volumes of 4l and 2l a low flush beaker is required (241.894.00.1)

Product Details

Additional Note2 Duofix PreWall brackets for system; Water supply connection R 1/2" male BSP parallel thread with integrated angle stop valve and hand wheel; Conduit pipe for the water supply connection of Geberit AquaClean; Flush bend; Protection plug; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; Fastening material; To be installed with a check valve or similar providing backflow prevention protection

Excluded: Flush plate

Ordering Information

Duofix WC frames

0

0-20

100

50R½

73

1045

23

112

18/2318/23

195 ≥ 30

0

100

48

9-135

12 6

41max. 62

Flow pressure range 0.1–10 bar

Operating temperature water max. 25 °C

Flush volume small range 3–4 l

Flush volume factory setting 5.8 and 3 l

Article no. PU1 PU4

111.383.00.5 1 12



Geberit Duofix frame for wall-hung WC, H112, with Sigma cistern 12 cm (UP320), without fixings and drainage

Application


• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm (not in room height applications)• For connecting Geberit AquaClean

Characteristics

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• Tool-free fastening for outlet bend, sound-absorbing, adjustable in


Bolero flush plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Dual flush with pneumatic button• Single flush with touchless flush or pneumatic buttons• The protection cover protects the service opening against moisture

and dirt and can be mounted without tools and cut to length• Cistern can be reversed to give access from behind in a duct situation

when flushed with pneumatic buttons or touchless flush• Universal water supply connection compatible with MeplaFix, can be





Product Details

Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve and hand wheel; Conduit pipe for the water supply connection of Geberit AquaClean; Flush bend; Protection plug; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; Fastening material; To be installed with a check valve or similar providing backflow prevention protection

Excluded: Flush plate; PreWall brackets; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm


0

0-20

100

50R½

73

1045

23

112

195 ≥ 30

18/23

0

100

48

9-135

12 6

41max. 62





Article no. PU1 PU4

111.384.00.5 1 12



Geberit Duofix frame for wall-hung WC, H112, with Sigma cistern 12 cm (UP320), connection for odour extraction with filtration New

Application

• For a screed of 0 - 200 mm (not in room height applications)• For installation in a partial-height Duofix system wall in front of a solid

or drywall construction• For installation in a room-high Duofix system wall• For mounting in front of a solid or drywall construction• For installation of a wall-hung WC with bolt fixings set at 180 or

230 mm centres• For connecting Geberit AquaClean• For connecting the Geberit flush plate Sigma40 with the odour

extraction unit

Characteristics

• Geberit Sigma concealed cistern 12 cm (UP320) with front actuation• Dual flush with Geberit actuator plate Sigma40• For optional use without odour extraction unit: dual flush with Geberit

actuator plates Sigma01, Sigma20, Sigma50 or Bolero• For optional use without odour extraction unit: single flush with

Geberit flush plates Sigma10, Rumba, Mambo or Tango• Adjustable flushing volume• Concealed cistern for tool-free mounting and maintenance• The protection cover protects the service opening against moisture

and dirt and can be mounted without tools and cut to length• Sound-absorbing actuator rods, tool-free, fast adjustment• Connection hose to angle stop valve can be screwed without tools• Tool-free fastening for outlet bend, sound-absorbing, adjustable in

depth with 8 positions, adjustable range 45 mm• Self-locking feet for tool-free alignment of the frame, (friction feet have

to be locked with spanner)• Galvanised leg supports, steplessly adjustable 0 - 200 mm• For pans with contact surfaces smaller than 170 mm (see accessory

111.847.00.1)• Frame with holes ø 9 mm for fastening in wood frame construction• Concealed cistern fully insulated against condensation• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Water supply connection at the top, offset to the left side• Outlet mounting box, can be universally positioned

Product Details

Additional Note2 Duofix PreWall brackets for system; Acoustic insulation set; Water supply connection R 1/2" male BSP parallel thread with integrated angle stop valve and hand wheel; Conduit pipe for the water supply connection of Geberit AquaClean; Flush pipe with odour extraction adapter; Protection plug; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; Fastening material; Outlet mounting box; To be installed with a check valve or similar providing backflow prevention protection



R½

0

0-20

100

50

73

23

112

195

325

≥ 31

18/23

0

100

48

9−135

12 6

41+2

−1≤ 62





Article no. PU1 PU4

111.353.00.5 1 12



Geberit Duofix frame for wall-hung WC, H98, with Kappa cistern 15 cm (UP200)

Application


• For installation in a partial-height Duofix system wall in front of a solid or drywall construction

• For mounting in front of a solid or drywall construction• For a screed of 0 - 200 mm

Characteristics

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Fast adjustment of the actuator rods for flush plate• Concealed cistern fully insulated against condensation• Protection housing for service opening, can be cut to length• Frame height 980 mm• With wall brackets to allow up to a 200 mm duct. For larger ducts up

to 400 mm use extension bolts 111.887.00.1• Geberit Kappa concealed cistern 15 cm (UP200) with front or top

actuation• Dual flush with Kappa flush plates• Dual flush with pneumatic button• Single flush with pneumatic and mechanical buttons• Water supply connection left• Fastening for outlet bend sound-absorbing• Connection hose to angle stop valve can be screw-connected by

hand• For pans with contact surfaces smaller than 170 mm (see accessory

111.847.00.1)• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual

flush requires material number 242.310.00.1 (note: must be used with pans designed for low volume flush)

Product Details

Additional Note2 Duofix PreWall brackets for system; Water supply connection R 1/2" male BSP parallel thread with integrated angle stop valve; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, ø 90/110 mm; Protection plug; Fastening material; To be installed with a check valve or similar providing backflow prevention protection



Geberit Duofix WC frame for wall-hung WC, H82, with Kappa cistern 15 cm (UP200)

Application



• For mounting in front of a solid or drywall construction• For a screed of 0 - 200 mm

Characteristics

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Fast adjustment of the actuator rods for flush plate• Concealed cistern fully insulated against condensation• Protection housing for service opening, can be cut to length• Frame height 820 mm• With wall brackets to allow up to a 200 mm duct. For larger ducts up

to 400 mm use extension bolts 111.887.00.1• Geberit Kappa concealed cistern 15 cm (UP200) with front or top

actuation• Dual flush with Kappa flush plates• Dual flush with pneumatic button• Single flush with pneumatic and mechanical buttons• Water supply connection left• Fastening for outlet bend sound-absorbing• Connection hose to angle stop valve can be screw-connected by

hand• For pans with contact surfaces smaller than 170 mm (see accessory

111.847.00.1)• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual


Product Details

Additional Note2 Duofix PreWall brackets for system; Water supply connection R 1/2" male BSP parallel thread with integrated angle stop valve; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, ø 90/110 mm; Protection plug; Fastening material; To be installed with a check valve or similar providing backflow prevention protection






Article no. PU1

111.292.00.1 1

33

98

50

18/23

23

0-20

0

R1/2

915

195

73

≥ 30

91

max. 107

0

48

41

66

min. 17

max. 62

9-135




Article no. PU1

111.242.00.1 1

82

50

18/23

22

0-20

0

R1/2

32

755

73

195 ≥ 30

75

0

48

40

max. 9166

min. 17

max. 62

9-135



Geberit Duofix frame for wall-hung WC, H112, with Sigma cistern 8 cm (UP720)

Application


• For installation in a room-height Duofix system wall in front of a solid or drywall construction

• For installing in a load bearing stud wall• For installation in split-height PreWall construction in front of a solid or

drywall construction• For installation in room-height PreWall or partition wall• For connecting Geberit AquaClean• Can not be embedded in concrete at full room height

Characteristics

• Self-supporting• Frame height 1120 mm• M12 fastening for ceramic appliances, fastening distance 18 cm or

23 cm • Front actuation only• Concealed cistern fully insulated against condensation• Protection cover for service opening can be mounted without tools

and cut to length• Water supply connection at the top, offset to the left side• Universal water supply connection compatible with MeplaFix, can be

mounted and operated without tools• Connection hose to angle stop valve can be screwed without tools• Sound-absorbing actuator rods, tool-free, fast adjustment• Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Dual flush with Sigma80, Sigma60, Sigma50, Sigma20, Sigma01 or

Bolero flush plates • Adjustable flushing volume• Not suitable for use with flush buttons• The protection cover protects the service opening against moisture

and dirt and can be mounted without tools and cut to length• Outlet bend depth with vertical connection 9 cm• Fastening for outlet bend adjustable in depth and sound-absorbing• Installation depth at least 8 cm with vertical drainage connection• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet galvanised, adjustable 0-12 cm• Self-locking feet for tool-free alignment of the frame, (friction feet have


111.847.00.1)

Product Details

Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve and hand wheel; Two protection plugs; Protection housing for service opening; Flush bend; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, PE-HD, ø 90 mm, extended; Adaptor sleeve, HDPE, ø 90/110 mm; Conduit pipe for the water supply connection of Geberit AquaClean; 2 PreWall brackets; Fastening material; To be installed with a check valve or similar providing backflow prevention protection



Geberit Duofix frame for wall-hung WC, H79, with concealed cistern for low height furniture, pneumatic, dual flush

Application


• For installation in bathroom furniture with full length front panel (not for use with front plinths)

• For furniture with an internal dimension of 465 mm wide, the item can not be used with side plinths

• For dual flush• Includes extension brackets taking the depth up to 335 mm

Characteristics

• Pneumatic flush actuation• Front or top actuation• Front or top access• Water supply connection at the bottom left• Self-supporting• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm

Product Details

Additional NoteTo be installed with a check valve or similar providing backflow prevention protection


0-12

≥ 34

16

0

23

100

R½59

18/23 112

98

45

98

1-58

0-12

0

41≤ 62

0-12

0

9

48

135




Article no. PU1 PU4

111.729.00.1 1 12




Article no. PU1

111.706.00.1 1

10

465

0

0-20

79

18/23

195

195−335

0



Geberit Duofix Special frame for wall-hung WC, H112, with Sigma cistern 12 cm (UP320), corner installation

Application


• For installation as a corner element in front of a drywall, solid wall, Duofix system wall

• For a screed of 0 - 200 mm (not in room height applications)• For connecting Geberit AquaClean

Characteristics

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with axis centre mark• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• Connection hose to angle stop valve can be screwed without tools• Water supply connection at centre back or at the top• Geberit Sigma concealed cistern 12 cm (UP320) with front actuation• Dual flush with Sigma80, Sigma60, Sigma50, Sigma20, Sigma01 or

Bolero flush plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Not suitable for use with flush buttons• The protection cover protects the service opening against moisture


mounted and operated without tools• Telescopic profiles to fasten to the wall and for fastening panelling• Telescopic profiles with detent mark• Wall fixture variable from 30° to 60°• Narrow leg supports allow for lateral offset of the drainage pipe• Support for front, top and lateral panelling• Variable element depth (see page 120)• For pans with contact surfaces smaller than 170 mm (see accessory



Product Details

Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve and hand wheel; Flush bend; Conduit pipe for the water supply connection of Geberit AquaClean; Protection plug; Installation kit for electrical connection; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; WC connection set, ø 90 mm; Fastening material; To be installed with a check valve or similar providing backflow prevention protection






Flush volume factory setting 6 and 3 l

1045

1120

0

0-200

500-760R½

180/230

1000

230

90

0

1000

128

48

110

60

410max. 6202010

Article no. PU1 PU4

111.399.00.5 1 10



Geberit Duofix Special frame for wall-hung WC, H112, with Sigma cistern 12 cm (UP320), disabled installation

Application


• For wall-hung WC with projection > 620 mm• For installation in a partial-height Duofix system wall in front of a solid

or drywall construction• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For mounting in front of a solid or drywall construction (order PreWall

brackets 111.844.00.1 separately)• For installation in split-height PreWall construction in front of a solid or

drywall construction• For a screed of 0 - 200 mm (not in room height applications)• For disabled WC installations• For connecting Geberit AquaClean

Characteristics

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• Tool-free fastening for outlet bend, sound-absorbing, adjustable in


Bolero flush plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • The protection cover protects the service opening against moisture

and dirt• Not suitable for use with flush buttons• The protection cover protects the service opening against moisture




111.847.00.1)• Adjustable installation height of the WC, 410 - 460 mm• Flush valve features settings to enable either a 6l and 3l flush or a 4.5l


Product Details

Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve and hand wheel; Conduit pipe for the water supply connection of Geberit AquaClean; Flush bend; Protection plug; Protection housing for service opening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; 2 threaded rods M12 for ceramics fastening; Fastening material; To be installed with a check valve or similar providing backflow prevention protection



Geberit Duofix frame for support handles, H112

Application

• For installation of grab rails• For a screed of 0 - 200 mm• For installation in a room-height Duofix system wall in front of a solid or

drywall construction• For installation in a room-high Duofix system wall• For mounting in front of a solid or drywall construction (order PreWall

brackets 111.844.00.1 separately)• For installation in a load bearing stud work

Characteristics

• Frame height 1120 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Fastening plate for support handles made from veneer wood, water-

resistant laminate, adjustable height and depth• Self-locking feet for tool-free alignment of the frame, (friction feet have

to be locked with spanner)

Additional NoteFastening material


73

300300

R½

1000

230-280

0 30

0-200

180/230 1045-1055

425

1120

130

0

1000-1010

410-460

170 45

48

90-135

2010





Article no. PU1 PU4

111.352.00.5 1 8

Article no. PU1 PU4

111.790.00.1 1 10

50112

365

100

0-20

0

73

85

0

4

48


Product GuideConcealed cisterns

Geberit acoustic insulation set for wall-hung WC and wall-hung bidet

Application

• For wall-hung WC and wall-hung bidet• For sanitaryware with fixing centres 180 mm or 230 mm• For decoupling solid-borne noise with WC and bidet• Insulation to be trimmed after pan fixed

Characteristics

• White

Product Details

Additional Note2 acoustic insulation sleeves


Concealed cisterns

Geberit Sigma concealed cistern 12 cm, (UP320)

Application

• For concealed installation• For back to wall floor-standing WCs

Characteristics

• Concealed cistern fully insulated against condensation• Front actuation only• Protection cover for service opening can be mounted without tools

and cut to length• Dual flush with Sigma80, Sigma60, Sigma50, Sigma20, Sigma01 or

Bolero flush plates • Dual flush with dual flush pneumatic and mechanical buttons• Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Single flush with touchless flush or pneumatic buttons• Water supply connection at centre back or at the top• Flush bend has maximum 8 cm adjustment. Flush can be cut down by

maximum of 8 cm • Installation height 1080 mm (can be cut down, depending on the WC

pan performance)• Minimum install height 950 mm• Fastening bracket adjustable in depth• Cistern can be reversed to give access from behind in a duct situation

when flushed with pneumatic buttons or touchless flush• Flush valve features 6l and 4.5l flush settings to enable either a 6l and

3l flush or a 4.5l and 3l flush. For flush volumes of 4l and 2l a low flush beaker is required (241.894.00.1)

Product Details

Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve; Protection housing for service opening; Flush pipe ø 45 mm; Fastening for flush bend; Protection plug for flush pipe; 2 slotted flat irons; 2 fastening brackets, pre-mounted; Fastening material; To be installed with a check valve or similar providing backflow prevention protection



Product material PE expanded

Material thickness 6 mm

Article no. PU1 PU2 PU4

156.050.00.1 1 10 200

Concealed cisterns





Article no. PU1 PU4

109.309.00.5 1 20

41

108

51

1045

235

23

100

R1/2

57

30

135

0

365

845

0

100

12 2-9

16-205



Geberit Sigma concealed cistern 8 cm, front actuation (UP720)

Application

• For solid construction• For floor standing WC• For concealed installation

Characteristics

• Concealed cistern fully insulated against condensation• Front actuation only• Concealed cistern for simple installation and tool-free repair works• Protection cover for service opening can be mounted without tools

and cut to length• Universal water supply connection compatible with MeplaFix, can be

mounted and operated without tools• Connection hose to angle stop valve can be screwed without tools• Dual flush with Sigma80, Sigma60, Sigma50, Sigma20, Sigma01 or

Bolero flush plates• Single flush with Sigma10, Rumba, Tango and Mambo • Flush bend has maximum 8 cm adjustment. Flush can be cut down by

maximum of 8 cm • Adjustable flushing volume• Water supply connection at the top, offset to the left side• Flush bend adjustable, 2 cm upwards and 1 cm downwards

Product Details

Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve and hand wheel; Flush bend; Protection housing for service opening; Fastening material; Protection plug for flush bend; To be installed with a check valve or similar providing backflow prevention protection



Geberit Kappa concealed cistern 15 cm (UP200)

Application


Characteristics

• Front or top actuation• Installation depth adjustable 18 cm - 24.5 cm• Fully insulated against condensation• Water supply connection left• Dual flush with Kappa flush plates• Dual flush with dual flush pneumatic and mechanical buttons• Single flush with single flush pneumatic buttons• Connection hose to angle stop valve can be screw-connected by

hand• Flush bend, welded• Fast adjustment of the actuator rods for flush plate• Cistern height 82 cm• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual


Product Details

Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve; Protection housing for service opening; Protection plug for flush bend; Fastening for flush bend; 2 fastening brackets, pre-mounted; Fastening material; To be installed with a check valve or similar providing backflow prevention protection






Flush volume small 3 l

Article no. PU1 PU4 Price£

109.772.00.1 1 32 150.08

0

R1/2

8

505

67

607

65–80

87

X

110

-15

≥ 30

8 1–5

110

0

87

-15





Article no. PU1 PU4

109.200.00.1 1 27

X

465

57

13

335465

0

9

18

min.3

0

max.9

25

max.9



Geberit Kappa concealed cistern 15 cm (UP200), extended flush pipe

Application

• For floor-standing and wall-hung WCs• For private and semi-public areas• For concealed installation

Characteristics

• Front or top actuation• Installation depth adjustable 18 cm - 24.5 cm• Protection housing for service opening, can be cut to length• Fully insulated against condensation• Water supply connection left• Dual flush with Kappa flush plates• Dual flush with dual flush pneumatic and mechanical buttons• Single flush with single flush pneumatic buttons• Connection hose to angle stop valve can be screw-connected by

hand• Flush bend, welded• Fast adjustment of the actuator rods for flush plate• Cistern height 98 cm• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual


Product Details

Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve; Protection housing for service opening; Protection plug for flush bend; WC connection set, ø 90 mm; 2 fastening brackets, pre-mounted; Fastening material; To be installed with a check valve or similar providing backflow prevention protection



Geberit exposed cistern type 123, low-mounted, 9 l, water supply connection left/right, with pneumatic lifter

Application


Characteristics

• Fully insulated against condensation• Impuls380 side filling valve• Cover without button• Water supply connection left and right• Flush pipe connection fitted• Single flush with single flush pneumatic buttons• 300 mm extention pipe available (118.131.11.1)

Product Details

Additional NoteFlush bend 39 x 35 cm, ø 50/44 mm; Pneumatic actuation unit; Fastening material; To be installed with a check valve or similar providing backflow prevention protection

Excluded: Angle stop valve R 1/2"; Pneumatic push button

Ordering InformationFlow pressure range 0.1–10 bar




Article no. PU1

109.211.00.1 1

X

465

57

13

465

595

0

9

18

min.3

0

max.9

25

max.9

Fill time (6 l) at 3 bar flow pressure 30 s

Fill time (9 l) at 3 bar flow pressure 45 s

Flush volume range 6 / 9 l

Drainage capacity 2.2–2.9 l/s

Flush volume factory setting 9 l

Article no. Colour PU1 PU4

123.137.11.1 White 1 24

305–3

41

33

3838

128

45

65

65

Product GuideWC flush plates


Geberit concealed cistern for low height furniture, pneumatic, dual flush

Application

• For installation in low height bathroom furniture (minimum height 790 mm from finished floor)

• For back to wall floor-standing WCs

Characteristics

• Pneumatic flush actuation• Water supply connection at the bottom left• Top or front access• Includes dual flush pneumatic button

Product Details

Additional NoteDual flush actuator; Flush bend; Sleeve; Fastening material; To be installed with a check valve or similar providing backflow prevention protection


WC flush plates

Geberit flush plate Sigma01 for dual flush, plastic New

Application

• For dual flush• For use with Geberit Sigma concealed cistern 12 cm (UP320) and

8 cm (UP720)• Not suitable for use with Geberit Kappa concealed cistern 15 cm

(UP200)

Product Details

Additional NoteActuator rods; Distance bolts; Mounting frame





Article no. PU1 PU4

109.720.00.1 1 24

30

464

355

45

94

98 8

15

8

R1/2

132

65 29

75-16

9

M64x2

WC flush plates

Actuation force < 20 N

Product material Plastic

Article no. Colour PU1 PU2 PU4

115.770.10.5 bahama beige 1 10 180

115.770.11.5 white alpine 1 10 180

115.770.21.5 gloss chrome 1 10 180

115.770.46.5 matt chrome 1 10 180

115.770.CG.5 manhattan 1 10 180

115.770.DK.5 edelweiss 1 10

115.770.DT.5 fine brass 1 10

115.770.DW.5 jet black RAL 9005 1 10 180

115.770.EP.5 pergamon 1 10 180

115.770.FB.5 agais 1 10

115.770.FR.5 star white 1 10

115.770.GM.5 satinox 1 10 180

115.770.KA.5 gloss / matt chrome 1 10 180

246

164

13



Geberit flush plate Sigma10 for single flush, plastic

Application

• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720)

• For single flush• Not suitable for Geberit Kappa concealed cisterns (UP200)

Product Details

Additional NoteMounting frame; Push rod; Distance bolts


Geberit flush plate Sigma20 for dual flush, stainless steel New

Application



(UP200)

Product Details

Additional NoteMounting frame; Distance bolts; Actuator rods


Geberit flush plate Sigma20 for dual flush, stainless steel, can be locked with screws New

Application



(UP200)

Characteristics

• Can be locked with screws

Product Details



Geberit flush plate Sigma20 for dual flush, plastic

Application


• For dual flush• Not suitable for use with Geberit Kappa concealed cistern 15 cm

(UP200)

Product Details






115.758.KJ.1 white / gloss chrome / white 1 10 180

115.758.KK.1 white / gold-plated / white 1 10 180

115.758.KL.1 white / matt chrome / matt chrome 1 10 180

115.758.KM.1 black / gloss chrome / black 1 10 180

115.758.KH.1gloss chrome / matt chrome / gloss chrome

1 10 180

115.758.KN.1matt chrome / gloss chrome / matt chrome

1 10 180


Product material Stainless steel


115.778.SN.1 stainless steel 1 10

164

246 11

164

246 11




115.781.SN.1 stainless steel 1 10




115.778.KJ.1 white / gloss chrome / white 1 10 180

115.778.KK.1 white / gold-plated / white 1 10 180

115.778.KL.1 white / matt chrome / matt chrome 1 10 180

115.778.KM.1 black / gloss chrome / black 1 10 180

115.778.KH.1gloss chrome / matt chrome / gloss chrome

1 10 180

115.778.KN.1matt chrome / gloss chrome / matt chrome

1 10 180

164

246 11

164

246 11



Geberit flush plate Sigma40 for dual flush with integrated odour extraction, glass New

Application

• For dual flush• For use with Geberit Sigma concealed cistern 12 cm (UP320) with

connection for odour extraction unit with filtration 111.353.00.5• For front actuation• For direct odour extraction from the WC ceramic appliance• For odour neutralisation through an active carbon filter• For installation in walls with up to 6 cm covering thickness (with

extension set)• For adding in-cistern blocks without chlorine or oxidising components• Not suitable for use with Geberit Kappa (UP200) concealed cistern 15

cm and Geberit Sigma concealed cistern 8 cm (UP720)

Characteristics

• Odour extraction unit with filtration integrated in the concealed cistern• Ventilation and control unit with radial fan, can be installed without

tools• LED display for filter replacement• Odour neutralisation with active carbon filter• Push-button for switching the odour extraction unit on and off• Automatic switching off of the odour extraction unit after a predefined

running time• Tool-free replacement of the active carbon filter• Tool-free insertion of in-cistern blocks

Product Details

Additional NoteMounting frame with swivelling mechanism; Distance rods; Actuator rods; Ventilation and control unit; Power supply unit with LED display; Cable connection with plug; Active carbon filter type 1; Cover; Insert for in-cistern blocks; Moisture protection on conduit pipe


Geberit flush plate Sigma40 for dual flush with integrated odour extraction, plastic New

Application

• For dual flush• For use with Geberit Sigma concealed cistern 12 cm (UP320) with

connection for odour extraction unit with filtration 111.353.00.5• For front actuation• For direct odour extraction from the WC ceramic appliance• For odour neutralisation through an active carbon filter• For installation in walls with up to 6 cm covering thickness (with

extension set)• For adding in-cistern blocks without chlorine or oxidising components• Not suitable for use with Geberit Kappa (UP200) concealed cistern 15

cm and Geberit Sigma concealed cistern 8 cm (UP720)

Characteristics

• Odour extraction unit with filtration integrated in the concealed cistern• Ventilation and control unit with radial fan, can be installed without

tools• LED display for filter replacement• Odour neutralisation with active carbon filter• Push-button for switching the odour extraction unit on and off• Automatic switching off of the odour extraction unit after a predefined

running time• Tool-free replacement of the active carbon filter• Tool-free insertion of in-cistern blocks

Product Details

Additional NoteMounting frame with swivelling mechanism; Distance rods; Actuator rods; Ventilation and control unit; Power supply unit with LED display; Cable connection with plug; Active carbon filter type 1; Cover; Insert for in-cistern blocks; Moisture protection on conduit pipe



Product materialGlass/aluminium-plastic composite

Nominal voltage 230 V AC

Mains frequency 50 Hz

Operating voltage 12 V DC

Power consumption 3 W

Air volume flow rate odour extraction unit 8.5 m3/h

Protection degree IP x4

Protection class III


115.600.SI.1 white glass 1 4

115.600.SJ.1 black glass 1 4

115.600.SQ.1 umbra glass 1 4

266

182

22

2−45 (6)


Product materialPlastic/aluminium-plastic composite







Protection class III


115.600.KQ.1 white plastic 1 4 64

115.600.KR.1 black plastic 1 4

266

182

22

2−45 (6)



Geberit flush plate Sigma50 for dual flush, for customisation

Application


• For dual flush• For customer to install a bespoke finish with max. of 3 mm depth• Not suitable for use with Geberit Kappa concealed cistern 15 cm

(UP200)

Product Details


Excluded: Design cover


Geberit flush plate Sigma50 for dual flush, glass

Application



(UP200)

Product Details



Geberit flush plate Sigma50 for dual flush, plastic

Application



(UP200)

Product Details



Geberit flush plate Sigma50 for dual flush stainless steel

Application

• For dual flush• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm

(UP720)• For front actuation• Not suitable for use with Geberit Kappa concealed cistern 15 cm

(UP200)

Product Details

Additional NoteMounting frame; Distance bolts; Actuator rods; Fastening material



Product material Die-cast zinc


115.788.00.1 for customisation 1 5


Product material Die-cast zinc / glass


115.788.SC.1 white grains 1 5

115.788.SE.1 green satinised 1 5

115.788.SD.1 smoked glass reflective 1 5

164

246 14

164

246 14


Product material Die-cast zinc / plastic


115.788.DW.1 black RAL 9005 1 5

115.788.11.1 white 1 5

115.788.EP.1 pergamon 1 5


Product material Brass / chrome-plated die-cast zinc


115.788.GH.1 brushed stainless steel 1 5

164

246 14

164

246 14



Geberit flush plate Sigma50 for dual flush, stainless steel, can be locked with screws

Application

• For installation in vandal resistant systems• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm

(UP720)• For dual flush• Not suitable for use with Geberit Kappa concealed cistern 15 cm

(UP200)

Characteristics


Product Details



Geberit flush plate Sigma50 for dual flush for customisation, can be locked with screws

Application


• For dual flush• For installation in vandal resistant systems• For customer to install a bespoke finish with max. of 3 mm depth• Not suitable for use with Geberit Kappa concealed cistern 15 cm

(UP200)

Characteristics


Product Details



Geberit flush plate Sigma50 for dual flush, glass, can be locked with screws

Application



(UP200)

Characteristics


Product Details



Geberit flush plate Sigma50 for dual flush, plastic, can be locked with screws

Application



(UP200)

Characteristics


Product Details




Product material Brass / chrome-plated die-cast zinc


115.785.GH.1 brushed stainless steel 1 5



115.785.00.1 for customisation 1 5

164

246 14

164

246 14


Product material Die-cast zinc / glass


115.785.SC.1 white grains 1 5

115.785.SD.1 smoked glass reflective 1 5

115.785.SE.1 green glass satinised 1 5


Product material Die-cast zinc / plastic


115.785.11.1 white alpine 1 5

115.785.DW.1 black RAL 9005 1 5

115.785.EP.1 pergamon 1 5

164

246 14

164

246 14



Geberit flush plate Sigma60 for dual flush, brushed chrome

Application

• For dual flush• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm

(UP720)• For front actuation• For use with plaster boarding/panelling 18 - 60 mm • Not suitable for use with Geberit Kappa concealed cistern 15 cm

(UP200)• Not suitable for retrofit

Characteristics

• Surface even actuation• For use with tiles 6–18 mm• Sound-absorbing actuator rods, tool-free, fast adjustment

Product Details


Cover frame for Geberit flush plate Sigma60, brushed chrome

Application

• For use with Geberit Sigma60 flush plate only

Product Details


Geberit insert for in-cistern block

Application

• For Geberit Sigma concealed cistern 12 cm (UP320)• For adding in-cistern blocks without chlorine or oxidising components• Not suitable for use with Geberit Sigma concealed cistern 8 cm

(UP720) and Geberit Kappa concealed cistern 15 cm (UP200)• Not suitable for use with the following flush plates: Sigma80,

Sigma60, Bolero, Rumba, Tango, Mambo

Additional NoteCover; Receptacle for in-cistern blocks; Mounting frame with swivelling mechanism


Geberit flush plate Bolero for dual flush, plastic

Application



(UP200)

Product Details

Additional NotePush rods; Distance rods; Fastening material




Article no. Colour PU1

115.792.GH.1 brushed chrome 1




139

221 18−6 06−18

15

246

164

06

Article no. PU1 PU2

115.612.00.1 1 5




115.777.10.1 bahama beige 1 10

115.777.11.1 white 1 10 180

115.777.21.1 gloss chrome 1 10 180

115.777.46.1 matt chrome 1 10 180

115.777.CG.1 manhattan 1 10


115.777.DT.1 fine brass 1 10

115.777.DW.1 black RAL 9005 1 10

115.777.EP.1 pergamon 1 10 180

115.777.FB.1 agais 1 10

115.777.FR.1 star white 1 10

115.777.GM.1 satinox 1 10

115.777.KB.1 gloss chrome / structured chrome 1 10 180

1-95

164

246 14



Geberit flush plate Tango for stop-and-go flush, die-cast zinc

Application


• For single flush• Not suitable for use with Geberit Kappa concealed cistern 15 cm

(UP200)

Product Details

Additional NotePush rod; Distance rods; Fastening material


Geberit flush plate Rumba for stop-and-go flush, plastic

Application



(UP200)

Product Details



Geberit flush plate Mambo with stop-and-go flush, stainless steel, can be locked with screws

Application



(UP200)

Characteristics

• Can be locked with anti-vandal screws

Product Details



Geberit flush plate Kappa20 for dual flush, plastic

Application

• For Geberit Kappa concealed cistern 15 cm (UP200)• For top or front actuation• For dual flush• Not suitable for Geberit Sigma concealed cisterns 12 cm (UP320) and

8 cm (UP720)

Product Details






115.760.11.1 white 1 10 180

115.760.21.1 gloss chrome 1 10 180

115.760.45.1 gold-plated 1 10

115.760.46.1 matt chrome 1 10 180

115.760.DT.1 fine brass 1 10

115.760.GM.1 satinox 1 10

115.760.HC.1 palladium 1 10

115.760.KA.1 gloss chrome / matt chrome 1 10




115.750.11.1 white 1 10 180

115.750.21.1 gloss chrome 1 10 180

115.750.46.1 matt chrome 1 10 180

115.750.KB.1 gloss chrome / structured chrome 1 10

164

2461

164

246

15




115.751.00.1 1 10 180




115.228.10.1 bahama beige 1 10

115.228.11.1 white 1 10 200

115.228.21.1 gloss chrome 1 10 200

115.228.46.1 matt chrome 1 10 200

115.228.CG.1 manhattan 1 10


115.228.DT.1 fine brass 1 10

115.228.DW.1 black RAL 9005 1 10

115.228.EP.1 pergamon 1 10 200

115.228.FB.1 agais 1 10

115.228.FR.1 star white 1 10

115.228.GM.1 satinox 1 10

115.228.KB.1 gloss chrome / structured chrome 1 10

164

246 25

142

213 16



Geberit flush plate Kappa21 for dual flush, plastic

Application


8 cm (UP720)

Product Details

Additional NoteMounting frame; Actuator rods; Distance bolts; Fastening material


Geberit flush plate Kappa50 for dual flush, die-cast zinc

Application


8 cm (UP720)

Product Details



Cover plate for Geberit Kappa concealed cistern 15 cm (UP200), plastic

Application

• For Geberit Kappa concealed cistern 15 cm (UP200)• Not suitable for Geberit Sigma concealed cisterns 12 cm (UP320) and

8 cm (UP720)

Product Details

Additional NoteDistance rods; Fastening material


Cover plate for Geberit Sigma concealed cistern 12 cm (UP320), die-cast zinc

Application


• Not suitable for use with Geberit Kappa concealed cistern 15 cm (UP200)

Characteristics


Product Details





Article no. Colour

115.240.KJ.1 white / gloss chrome / white

115.240.KH.1 gloss chrome / matt chrome / gloss chrome

115.240.KM.1 black / gloss chrome / black

115.240.KK.1 white / gold-plated / white

115.240.KL.1 white / matt chrome / matt chrome

115.240.KN.1 matt chrome / gloss chrome / matt chrome




115.260.11.1 white 1 10 180

115.260.21.1 gloss chrome 1 10 180

115.260.46.1 matt chrome 1 10 180

115.260.HC.1 palladium 1 10

142

212 14

211

142

15



115.680.11.1 white 1

115.680.21.1 gloss chrome 1



115.765.46.1 matt chrome 1 10 180

142

213

164

246

Product GuideRemote flushing kits


Cover plate for Geberit Sigma concealed cistern 12 cm (UP320), stainless steel

Application


• Not suitable for use with Geberit Kappa concealed cistern 15 cm (UP200)

Characteristics


Product Details



Extension set for Geberit concealed cistern

Application

• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720) and Geberit Kappa concealed cistern 15 cm

• For extending flush plates up to an outer wall of max. 180 mm• For Sigma01, Sigma10, Sigma20, Sigma50, Rumba, Bolero, Tango,

Mambo and Kappa flush plates

Additional Note2 extensions for push rods; 2 extensions for distance rods; Fastening material


Remote flushing kits

Geberit palm push WC flush control, pneumatic, single flush, with actuator

Application

• For pneumatic remote flush actuation of Geberit Sigma concealed cisterns 12 cm (UP320) and Geberit Kappa concealed cisterns 15 cm (UP200)

• For single flush• For wall thicknesses of 17 - 25 mm• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),

concealed cistern type 123 and concealed cistern for low height furniture

Characteristics

• Round design• 53 mm hole required

Product Details

Additional NotePneumatic flush button with bellows; Pneumatic actuation unit; 2 m air hose


Geberit palm push WC flush control, pneumatic, single flush, without actuator

Application

• For pneumatic remote flush actuation of Geberit concealed cistern type 123

• For single flush• For wall thicknesses of 17 - 25 mm• Not suitable for Geberit Sigma concealed cistern 12cm (UP320), 8 cm

(UP720) and Geberit Kappa concealed cistern 15 cm (UP200)

Characteristics


Product Details

Additional NotePneumatic flush button with bellows




115.798.00.1 1 10 180

Article no. PU1 PU2

240.938.00.1 1 10

164

246

Remote flushing kits



115.114.11.1 white 1 10 240

115.114.21.1 gloss chrome 1 10 240



241.199.11.1 white 1 10 100

241.199.21.1 gloss chrome 1 10 100

6

17-25

62 52

43

6

17-25

62 52

43



Geberit finger push WC flush control, pneumatic, single flush, with actuator, metal

Application

• For pneumatic remote flush actuation of Geberit concealed Sigma concealed cisterns 12 cm (UP320) and Geberit Kappa concealed cisterns 15 cm (UP200)

• For single flush• For wall thicknesses of 0 - 30 mm• 50 mm hole required• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),


Product Details



Geberit finger push WC flush control, pneumatic, single flush, without actuator, metal

Application


• For single flush• For wall thicknesses of 0 - 30 mm• 50 mm hole required• Not suitable for Geberit Sigma concealed cistern 12cm (UP320), 8 cm


Product Details



Geberit palm push WC flush control, pneumatic, single flush, without actuator, metal

Application


• For single flush• For wall thicknesses of 0 - 30 mm• 50 mm hole required• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),


Product Details



Geberit palm push WC flush control, pneumatic, single flush, without actuator, metal

Application


• For single flush• For wall thicknesses of 0 - 30 mm• 50 mm hole required• Not suitable for Geberit Sigma concealed cistern 12cm (UP320), 8 cm


Product Details





115.947.00.1 stainless steel 1 12

115.947.21.1 gloss chrome 1 12 360



241.198.21.1 gloss chrome 1 12

241.198.00.1 stainless steel 1

122

0 - 30

63

63

122

0 - 30



115.949.21.1 gloss chrome 1 12




63

122

0 - 30

63

122

0 - 30



Geberit WC flush control, pneumatic, single flush, for institutions, metal

Application


• For single flush• For wall thicknesses of 0 - 170 mm• Not suitable for Geberit Sigma concealed cistern 12cm (UP320), 8 cm


Product Details

Additional NotePneumatic flush button with bellows and sleve


Geberit WC flush control, pneumatic, single flush, for institutions, metal

Application


• For single flush• For wall thicknesses of 60 - 270 mm• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720)

Characteristics


Product Details

Additional NotePneumatic actuation unit; 2 m air hose


Geberit WC flush control, pneumatic, single flush, plastic

Application

• For pneumatic remote single flush actuation of Geberit Sigma concealed cisterns 12 cm (UP320), Geberit Kappa concealed cisterns 15 cm (UP200) and concealed cistern type 123

• For single flush• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720)

Characteristics

• Square design

Product Details

Additional NoteConduit pipe, 1.7 m; 2 m air hose; Concealed housing; Pneumatic actuator; Protection housing; Fastening material


Geberit WC flush control, pneumatic, dual flush, plastic

Application


• For dual flush• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),


Characteristics

• Square design

Product Details

Additional NoteConduit pipe, 1.7 m; 2 m air hose; Concealed housing; Pneumatic actuator; Protection housing; Fastening material




241.144.00.1 stainless steel 1 8



115.943.21.1 gloss chrome 1 10 120

63

264

0 - 170

37

6-27



115.941.11.1 white 1 10 120

115.941.KA.1 gloss chrome / matt chrome 1 10 120



115.942.11.1 white 1 10 120

115.942.KA.1 gloss chrome / matt chrome 1 10 120

108

108

108

108



Geberit WC flush control, pneumatic, dual flush, for furniture

Application


• For dual flush• 65 mm hole required• Not suitable for Geberit Sigma concealed cistern

Characteristics

• Round design

Product Details

Additional NotePneumatic actuation unit; 2 m air hose


Geberit WC flush control, cable actuator, dual flush, drywall construction, plastic

Application

• For drywall construction• For Geberit Kappa concealed cistern 15 cm (UP200)• For dual flush• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),


Characteristics

• Flush actuation using cable actuator• Actuator made of plastic• Fastening for actuator on the back with counter nut• Length of the cable actuator cannot be changed• 45 mm hole required

Product Details

Additional NoteDual flush actuator with cable actuators; Lifter for installation on flush valve; Protective pipe; Counter nut with extension; Fastening material


Geberit WC flush control, cable actuator, dual flush, drywall construction, metal

Application

• For drywall construction• For Geberit Kappa concealed cistern 15 cm (UP200)• For dual flush• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),


Characteristics

• Flush actuation using cable actuator• Actuator made of die-cast zinc• Fastening for actuator on the back with counter nut• Length of the cable actuator cannot be changed• 45 mm hole required

Product Details

Additional NoteDual flush actuator with cable actuators; Lifter for installation on flush valve; Protective pipe; Counter nut with extension; Fastening material


Geberit WC flush control, pneumatic, foot actuation wall

Application

• For pneumatic remote single flush actuation of Geberit Sigma concealed cisterns 12 cm (UP320), Geberit Kappa concealed cistern 15 cm (UP200), concealed cistern type 123 and concealed cistern for low height furniture

• For single flush• For installation in floor• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720)

Product Details

Additional NoteConduit pipe, 3 m; Pneumatic hose, 3.5 m; Pneumatic actuation unit; Fastening material




115.999.21.1 gloss chrome 1 10 240



115.075.21.1 gloss chrome 1 10

8

8 9

M64x2

min. 15- max. 18

Ø 65 ø 45

85

52

13

035



115.075.21.Z gloss chrome 1 10



115.918.00.1 1 10 120

Ø 65 ø 45

85

52

13

035

11

154



Geberit WC flush control, pneumatic, foot actuation floor

Application

• For pneumatic remote single flush actuation of Geberit Sigma concealed cisterns 12 cm (UP320), Geberit Kappa concealed cistern 15 cm (UP200), concealed cistern type 123 and concealed cistern for low height furniture

• For single flush• For solid construction• For installation in floor• For drywall construction• For pneumatic remote control flush actuation of Geberit surface-

mounted and concealed cisterns• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720)

Product Details

Additional NoteConduit pipe, 3 m; Pneumatic hose, 3.5 m; Pneumatic actuation unit; Protection box made of EPS; Fastening material


Geberit flush plate Mambo for single flush, mains operation, touchless for Geberit Sigma concealed cistern 8 cm (UP720)

Application

• For use with Geberit Sigma concealed cistern 8 cm (UP720)• For use with the Mambo IRBA flush plate• Not suitable for barrier-free and wheelchair-suitable construction• Not suitable for Geberit Sigma concealed cisterns 12 cm (UP320),

Geberit Kappa concealed cistern 15 cm (UP200), concealed cistern type 123 and concealed cistern for low height furniture

• Not suitable for use with Geberit insert for in-cistern block

Characteristics

• Infra-red user detection• Self-calibrating infra-red control• Infra-red detection with background fade-out• Driven by servo motor• Operation with extra-low voltage – no mains voltage in the cistern• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Automatic flush release• Manual, touchless flush release• Manual flush actuation using flush plate• Triggers a full flush• Minimum detection time can be set• Initial flush can be set• Repeat flush can be set• Flush actuator made of stainless steel, can be connected with anti-

vandal screws• Flush actuation can be deactivated using Geberit Clean Handy• Flush actuation settings can be made and checked, using Geberit

Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing• Requires transformer 115.861.00.1

Product Details

Additional NoteActuator plate Mambo IRBA with infra-red window, stainless steel; Mounting frame with infra-red control, pre-mounted; Cradle with servo motor and lifting device, pre-mounted; Push rod; Distance rods; Fastening material

Excluded: Power supply unit 115.861.00.1




115.939.00.1 1 10 120

33

12

12

Interval flush adjustment range 1–168 h

Interval flush factory setting 24 h

Activation time 7 s

Activation time range 1–60 s

Operating voltage 4.1 V DC



Protection degree IP 45





Geberit flush plate Mambo for single flush, mains operation, touchless for Geberit Sigma concealed cistern 12 cm (UP320)

Application

• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For use with the Mambo IRBA flush plate• Not suitable for barrier-free and wheelchair-suitable construction• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),



Characteristics



Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing• Requires transformer 115.861.00.1

Product Details

Additional NoteActuator plate Mambo IRBA with infra-red window, stainless steel; Mounting frame with infra-red control, pre-mounted; Cradle with servo motor and lifting device, pre-mounted; Cover; Push rod; Distance rods; Fastening material



Geberit flush plate Sigma80 for dual flush, mains operation, touchless for Sigma 12 cm (UP320)

New

Application

• For use with Geberit Sigma concealed cistern 12 cm (UP320)• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),



Characteristics

• Flush plate made of glass, interlockable• Manual, touchless flush release• Flush plate without mechanical buttons• Flush buttons identifiable by light bars• Button illumination can be set in five colours• Dual flush• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Electrical power supply via power supply unit• Operation with extra-low voltage – no mains voltage in the cistern• Plug connection with cross-polarity protection• Button illumination activated when approached• Infra-red user detection• Self-calibrating infra-red control• Infra-red detection with background fade-out• Flush actuation possible via external push-button• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Flush actuation can be manually deactivated for cleaning• Minimum detection time can be set• Initial flush can be set• Repeat flush can be set• Automatic flush actuation can be activated• Easy maintenance and cleaning• Easy installation and servicing• Requires transformer 115.861.00.1• Minimum wall thickness 20 mm

Product Details

Additional NoteFlush plate; Mounting frames; Cradle with servo motor and lifting device, pre-mounted; Fastening material



The Geberit Sigma80 range is only available to displaying retailers. Please contact your local area sales manager for further information



Activation time 7 s













116.090.SG.1 black glass 1

116.090.SM.1 mirrored glass 1

247

164

1

37



Geberit flush plate Sigma80 for dual flush, mains operation, touchless for Sigma 8 cm (UP720) New

Application

• For use with Geberit Sigma concealed cistern 8 cm (UP720)• Not suitable for Geberit Sigma concealed cisterns 12 cm (UP320),



Characteristics

• Flush plate made of glass, interlockable• Manual, touchless flush release• Flush plate without mechanical buttons• Flush buttons identifiable by light bars• Button illumination can be set in five colours• Dual flush• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Electrical power supply via power supply unit• Operation with extra-low voltage – no mains voltage in the cistern• Plug connection with cross-polarity protection• Button illumination activated when approached• Infra-red user detection• Self-calibrating infra-red control• Infra-red detection with background fade-out• Flush actuation possible via external push-button• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Flush actuation can be manually deactivated for cleaning• Minimum detection time can be set• Initial flush can be set• Repeat flush can be set• Automatic flush actuation can be activated• Easy maintenance and cleaning• Easy installation and servicing• Requires transformer 115.861.00.1• Minimum wall thickness 20 mm

Product Details

Additional NoteFlush plate; Mounting frames; Cradle with servo motor and lifting device, pre-mounted; Fastening material



The Geberit Sigma80 range is only available to displaying retailers. Please contact your local area sales manager for further information

Geberit flush plate Mambo for single flush, battery operation, touchless for Sigma 12 cm (UP320)

Application

• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For use with the Mambo IRBA flush plate• Not suitable for barrier-free and wheelchair-suitable construction• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),


Characteristics



Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing

Product Details

Additional NoteActuator plate Mambo IRBA with infra-red window, stainless steel; Mounting frame with infra-red control and battery compartment, pre-mounted; Cradle with servo motor and lifting device, pre-mounted; 2 batteries, each 1.5 V LR20 alkaline; Cover; Push rod; Distance rods; Fastening material







116.091.SG.1 black glass 1

116.091.SM.1 mirrored glass 1

247

164

1

37



Activation time 7 s



Battery type LR20




Product GuideMonolith sanitary modules

Geberit WC flush control, electronic, touchless

Application

• For automatic flush actuation of Geberit Sigma concealed cistern 12 cm (UP320)

• For single flush• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),


Product Details

Additional NotePower supply unit; Installation phase box for power supply unit; Electrical lifting device for flush valve with control electronics


Geberit installation set for Geberit WC flush control, electronic

Application

• For concealed installation in solid or drywall construction• For preparing the mains connection for WC flush actuators• For concealed cistern from year of construction 2002 onwards

Characteristics

• Transforming the mains voltage to extra-low voltage 4.1 V DC

Product Details

Additional NotePower supply unit; Concealed outlet for drilling diameter ø 76 mm; Cover for concealed outlet; Conduit pipe, 1.7 m; Pipe entry


Connection cable 2m WC flush control for Sigma80


Monolith sanitary modules

Geberit Monolith sanitary module for wall-hung WC, H101, with outlet pipe connection

Application

• For wall mounted WC with 240 - 260 mm wall drainage outlet (for further drainage outlet options please see accessories on page 70)

• For use in wall outlet connections, outlet height in excess of 230 mm• For mounting on finished floors• Requires Monolith feet if installing onto a low weight bearing or dry

wall installation (131.104.00.1) - see page 37• For installation as part of renovation work, design or new build• Not suitable for Geberit AquaClean - see page 91• metal bracketry for supporting ceramics is not suitable

Characteristics

• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium

• Includes a Duofix frame PreWall mounted• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right• Front panel made of 8 mm glass• Side base pods can be adjusted to skirting board • Ceramics fastening M12, fastening distance holes for both 18 cm and

23 cm

Product Details

Additional NoteWater supply connection set with 2 angle stop valves R 1/2 ; Flush pipe 230 x 230 mm, ø 50 / 44 mm; WC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; 2 threaded rods M12 for ceramics fastening; Fastening material for solid wall; Acoustic insulation set; Fastening material for wall-hung WC


* available Qtr 3 2012

The Geberit Monolith range is only available to displaying retailers. Please contact your local area sales manager for further information








Mains frequency 50–60 Hz

Nominal voltage 85–240 V AC

Article no. PU1 PU2

115.861.00.1 1 10

Article no. PU1

242.658.00.1 1

43

33

0 - 30

77

77

Monolith sanitary modules




Flush volume large range 4.5 / 6 l

Article no. New product Colour PU1 PU4

131.021.SI.1 white glass / aluminium 1 6

131.021.SJ.1 black glass / aluminium 1 6

131.021.SQ.1 NEW umbra glass / aluminium * 1 6

131.021.SL.1 NEW mint glass / aluminium 1 6

0

908

485

R½

101

18/23

25

47 413 4 13 4

106

43

0



Geberit Monolith sanitary module for floor-standing WC, H101, with P-Bend

Application

• For close coupled WC with 150 mm floor drainage outlet (for further drainage outlet options please see accessories on page 70)

• For use in floor outlet connections• For use in wall outlet connections, outlet height 180 mm (requires

131.083.16.1)• For mounting on finished floors• For installation as part of renovation work, design or new build• metal bracketry for supporting ceramics is not suitable

Characteristics


• Includes a Duofix frame PreWall mounted• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Integrated dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right• Front panel made of 8 mm glass• Side base pods can be adjusted to skirting board

Product Details

Additional NoteWater supply connection set with 2 angle stop valves R 1/2 ; Flush pipe 230 x 230 mm, ø 50 / 44 mm; P-bend, PP, ø 90 mm ; Adaptor sleeve, HDPE, ø 90/110 mm; Rubber seal EPDM; Fastening material for solid wall


* available Qtr 3 2012

Geberit Monolith sanitary module for wall-hung WC, H114, with outlet pipe connection New

Application


• For use in wall outlet connections, outlet height in excess of 230 mm• For mounting on finished floors• Requires Monolith feet if installing onto a low weight bearing or dry

wall installation (131.104.00.1) - see page 37• For installation as part or renovation work, design or new build• Not suitable for Geberit AquaClean - see page 91• metal bracketry for supporting ceramics is not suitable

Characteristics

• Module height 114 cm• Sanitary module with front cladding made of toughened safety glass

(ESG) and lateral cladding made of brushed aluminium • Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water connection at the rear centre• Ceramics fastening M12, fastening distance 18 cm

Product Details

Additional NoteWater supply connection set with angle stop valve; WC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; Flush pipe 230 x 230 mm, ø 50 / 44 mm; 2 threaded rods M12 for ceramics fastening; Acoustic insulation set; Fastening material


available Qtr 3 2012






Article no. New product

Colour PU1 PU4

131.002.SI.1 white glass / aluminium 1 6

131.002.SJ.1 black glass / aluminium 1 6

131.002.SQ.1 *NEW umbra glass / aluminium 1 6

131.002.SL.1 NEW mint glass / aluminium 1 6

0

908

485R½

1010

180 10

10

106

0

Height x Width x Depth 114.5 x 50.5 x 10.6 cm






131.031.SI.1 white glass / aluminium 1

131.031.SJ.1 black glass / aluminium 1

131.031.SQ.1 umbra glass / aluminium 1

0

505

1145

25

R½

18

30

92−102

104

106

43

0

109



Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap and mixer right, drawer left New

Application• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• Two holes for wall-mounted washbasin taps with center distance 10

cm and mixer to the right• For concealed wall-mounted taps from Dornbracht, Hansa,

Hansgrohe, KWC and Villeroy & Boch• other manufacturers may be compatible• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitable

Characteristics• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass

(ESG) and lateral cladding made of brushed aluminium • Side pull-out drawer with mechanical opening support

Product Details

Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Extension left with telescopic slide; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting railOrdering Information


Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap and mixer right, drawer right New

Application• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• Two holes for wall-mounted washbasin taps with center distance 10


Hansgrohe, KWC and Villeroy & Boch• other manufacturers may be compatible• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitableCharacteristics• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass

(ESG) and lateral cladding made of brushed aluminium • Side pull-out drawer with mechanical opening supportProduct Details

Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Extension right with telescopic slide; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting railOrdering Information



Operating pressure 1–10 bar

Maximum operating temperature 80 °C

Maximum operating temperature, short-term 90 °C






815

732

1041145

18−45

8−16

0−2310

≥ 30

R½45−60

545−685

0

39

85−235

50−65R½

87

107

60

30

55

64









815

732

1041145

18−45

8−16

0−2310

≥ 30

R½45−60

545−685

0

39

85−235

50−65R½

87

107

60

30

55

64



Geberit Monolith sanitary module for washbasins with wall-mounted tap, extension left and right

New

Application

• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• Two holes for wall-mounted washbasin taps with center distance 10


Hansgrohe, KWC and Villeroy & Boch• other manufacturers may be compatible• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitable

Characteristics

• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass


Product Details

Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; 2 Extensions (left and right) with telescopic slide; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting rail



Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap and mixer right, without drawer New

Application

• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• Two holes for wall-mounted washbasin taps with center distance 10


Hansgrohe, KWC and Villeroy & Boch• other manufacturers may be compatible• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitableCharacteristics• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass

(ESG) and lateral cladding made of brushed aluminium Product Details

Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting railOrdering Information











815

732

1041145

18−45

8−16

0−2310

≥ 30

R½45−60

545−685

0

39

85−235

50−65R½

87

107

60

30

55

64




Höhe x Breite x Tiefe 114,5 x 73,2 x 10,7 cm





815

732

1041145

18−45

8−16

10

R½45−60

545−685

0

39

85−235

50−65R½

87

107

60

30

55

64



Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap and mixer left, drawer left New

Application

• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with wall-mounted taps from Vola, with mixer on the left• other manufacturers may be compatible• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitable

Characteristics



Product Details

Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Extension left with telescopic slide; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting rail



Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap with mixer left, drawer right New

Application

• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with wall-mounted taps from Vola, with mixer on the left• other manufacturers may be compatible• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitableCharacteristics• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass

(ESG) and lateral cladding made of brushed aluminium • Side pull-out drawer with mechanical opening supportProduct Details

Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Extension right with telescopic slide; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting railOrdering Information











815

732

1041145

18−45

8−16

0−238

≥ 30

R½

45−60545−685

0

39

85−235

50−65R½

87

107

60

30

55

64









815

732

1041145

18−45

8−16

0−23

≥ 30

8

R½

45−60545−685

0

39

85−235

50−65R½

87

107

60

30

55

64



Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap with mixer left, drawer left and right New

Application


Characteristics



Product Details

Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; 2 Extensions (left and right) with telescopic slide; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting rail



Geberit Monolith sanitary module for wall-hung washbasins and wall-mounted tap with mixer left, without drawer New

Application


Characteristics

• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Connection to integrated water supply• Siphon with integrated adjustable inlet• Ablaufabdeckung stufenlos höhenverstellbar• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass

(ESG) and lateral cladding made of brushed aluminium Product Details

Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting railOrdering Information











815

732

1041145

18−45

8−16

0−238

≥ 30

R½45−60

545−685

0

39

85−235

50−65R½

87

107

60

30

55

64









815

732

1041145

18−45

8−16

8

R½45−60

545−685

0

39

85−235

50−65R½

87

107

60

30

55

64



Geberit Monolith sanitary module for wall-hung washbasin and deck-mounted tap, drawer left New

Application

• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with deck-mounted taps• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitable

Characteristics

• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Anschluss an die Trinkwasserversorgung integriert• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass


Product Details

Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Extension left with telescopic slide; 2 angle stop valves R 1/2"; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting rail; Extension for valve



Geberit Monolith sanitary module for wall-hung washbasin and deck-mounted tap, drawer right New

Application


Characteristics

• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass


Product Details

Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Extension right with telescopic slide; 2 angle stop valves R 1/2"; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting rail; Extension for valve












815

732

1145

18−45

8−16

0−23

≥ 30

R½45−53

545−615

39

85−235

50−65R½

0

87

107

60

30

55

64









815

732

1145

18−45

8−16

0−23

≥ 30

R½45−53

545−615

39

85−235

50−65R½

0

87

107

60

30

55

64



Geberit Monolith sanitary module for wall-hung washbasin and deck-mounted tap, drawers left and right

Application


Characteristics

• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass


Product Details

Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; 2 Extensions (left and right) with telescopic slide; 2 angle stop valves R 1/2"; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting rail; Extension for valve



Geberit Monolith sanitary module for wall-hung washbasin and deck-mounted tap, without drawer

New

Application


Characteristics

• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass

(ESG) and lateral cladding made of brushed aluminium

Product Details

Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; 2 angle stop valves R 1/2"; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting rail; Extension for valve












815

732

1145

18−45

8−16

0−23

≥ 30

R½45−53

545−615

39

85−235

50−65R½

0

87

107

60

30

55

64









815

732

1145

18−45

8−16

R½

45−53545−615

39

85−235

50−65R½

0

87

107

60

30

55

64



Geberit Monolith sanitary module for Geberit AquaClean, H114, with outlet pipe connection New

Application


• For use in wall outlet connections, outlet height in excess of 230 mm• For mounting on finished floors• For replacing close coupled WC with exposed cistern to wall-hung

WC• Requires Monolith feet if installing onto a low weight bearing or dry

wall installation (131.104.00.1) - see page 37• For installation as part or renovation work, design or new build• For connecting Geberit AquaClean• metal bracketry for supporting ceramics is not suitable

Characteristics

• Module height 114 cm• Sanitary module with front cladding made of toughened safety glass

(ESG) and lateral cladding made of brushed aluminium • Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Side connection on left or right• Water supply connection at the bottom left or right• Water connection at the rear centre• Ceramics fastening M12, fastening distance 18 cm

Product Details

Additional NoteWater supply connection set with angle stop valve; WC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; Flush pipe 230 x 230 mm, ø 50 / 44 mm; 2 threaded rods M12 for ceramics fastening; Acoustic insulation set; Fastening material



Geberit Monolith sanitary module for floor-standing WC, H114, with P-Bend New

Application

• For close coupled WC with 150 mm floor drainage outlet (for further drainage outlet options please see accessories on page 70)

• For use in floor outlet connections• For use in wall outlet connections, outlet height 180 mm (requires

131.083.16.1)• For replacing floor-standing WC with close-coupled cistern• For mounting on finished floors• For installation as part or renovation work, design or new build• metal bracketry for supporting ceramics is not suitable

Characteristics

• Module height 114 cm• Includes a Duofix frame PreWall mounted• Sanitary module with front cladding made of toughened safety glass

(ESG) and lateral cladding made of brushed aluminium • Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water connection at the rear centre

Product Details

Additional NoteWater supply connection set with angle stop valve; Flush pipe 230 x 230 mm, ø 50 / 44 mm; P-bend, PP, ø 90 mm ; Adaptor sleeve, HDPE, ø 90/110 mm; Rubber seal EPDM; Fastening material













0

505

R½

18

30

25

15

28

92−102

104

1145

106

455

25

0

109










0

505

18

92−102

104

R½

30

1145

106

0

109



Geberit Monolith sanitary module for bidet, H101New

Application

• For replacing wall-hung bidet• For mounting on finished floors• For installation in renovations, conversions and new buildings• For use in wall inlet connections• For installing pedestal and wall-hung bidets• metal bracketry for supporting ceramics is not suitable

Characteristics


• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Water supply connection at the bottom left or right• Wall inlet connection height: 8–21 cm from finished floor• Fastening distance of bidet 18 cm

Product Details

Additional NoteElement for bidet with front and side cladding; Fastening material for solid wall; Water supply connection set; 2 feet




Double towel rail for Geberit Monolith sanitary module for washbasin, length 31 cm New

Characteristics

• Emco towel rail, series Emco Loft• Chrome-plated• Length 31 cm



Double towel for Geberit Monolith sanitary module for washbasin, length 41 cm New

Characteristics

• Emco towel rail, series Emco Loft• Chrome-plated• Length 41 cm



Set of fixing brackets for drywall for Geberit Monolith sanitary module for washbasin New

Application

• For Geberit Monolith washbasin unit

Additional Note2 fastening brackets; Fastening material



Set of Geberit Monolith feet

Application

• For supporting Geberit wall-hung Monolith sanitary modules on drywall construction and low load bearing walls


Height x Width x Depth 101 x 48,5 x 10,6 cm







0

485

10118

106

0



Article no. PU1

131.099.00.1 1

Article no. PU1

131.104.00.1 1



Support bracket set for WC ceramic appliance, Geberit Monolith sanitary module

Application

• For additional support of WC pans with contact surfaces (x) smaller than 170 mm

• For use with Geberit Duofix WC frames


Geberit water supply bottom connection set, 3/8" and 1/2"

Application

• For use in bottom connections


Monolith S-bend for wall-hung WC, 90/110

Application

• For connecting wall-hung WC to floor outlet 15 - 30 cm from wall

Additional NoteS-bend, PVC; WC outlet bend, HDPE, ø 90 mm


Set of Geberit Monolith outlet pipe for floor-standing WC

Application

• For connecting floor-standing WC to wall outlet 18 cm from wall

Additional NoteWC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm


Set of Geberit Monolith outlet bend for floor-standing WC

Application

• For connecting floor-standing WC to floor outlet 7 - 15 cm from wall

Additional NoteWC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; Rubber seal EPDM; Fastening material


Geberit Monolith offset outlet pipe for wall-hung WC

Application

• For connecting wall-hung WC to wall outlet 17 - 19 cm

Additional NoteStraight connector for WC, 7 cm offset, PP, 90 mm; 2 sealing collars


Geberit Monolith offset outlet pipe for wall-hung WC

Application

• For connecting wall-hung WC to wall outlet 21-23 cm

Additional NoteWC outlet pipe, 3 cm offset, HDPE, ø 90 mm


Article no.

131.105.00.1

Article no. PU1

131.074.00.1 1


131.088.29.1 grey 1

X


131.083.16.1 black 1


131.082.16.1 black 1


131.108.11.1 white alpine 1



Product GuideDuofix basin frames


Duofix basin frames

Geberit Duofix frame for washbasin, H112

Application

• For installation of a wall-hung washbasin with bolt fixings set at between 50 and 380 mm centres (with accessories 111.868.00.1 fastening distance can extend from 380 - 580 mm)

• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm

Characteristics

• Frame height 1120 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Washbasin fastening distance 50 - 380 mm• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Tap connection plate with adjustable height and depth• Fastening for outlet bend, adjustable height• With wall brackets to allow up to a 200 mm duct. For larger ducts up

to 400 mm use extension bolts 111.887.00.1• With backplate elbows and chrome isolating valves with 3/8" BSP

connection

Additional Note2 water connections R 1/2"; 2 angle stop valves R 1/2"; 2 Duofix PreWall brackets for system; 2 threaded rods M10 for ceramics fastening; Fastening material


Geberit Duofix frame for washbasin, H98/82

Application


• For installation of a wall-hung washbasin with bolt fixings set at between 50 and 380 mm centres (with accessories 111.868.00.1 fastening distance can extend from 38 - 58 cm)

• For a screed of 0 - 200 mm

Characteristics

• Frame height 820 / 980 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Washbasin fastening distance 50 - 380 mm• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Tap connection plate with adjustable height and depth• Fastening for outlet bend, adjustable height• With wall brackets to allow up to a 200 mm duct. For larger ducts up


connection



Duofix basin frames

Article no. PU1

111.495.00.1 1

80

52

112

76

50

100

0-20

0

5-38

73

306

153

7

48

85

0

6

Article no. PU1

111.494.00.1 1

52

80

98(82)

76

50

0-20

0

5-38

73

306

153

7

48

6

85

0


Product GuideTaps

Geberit Duofix frame for washbasin, H112–130, for wall-mounted tap

Application

• For installation of a wall-hung washbasin with bolt fixings set at between 50 and 380 mm centres (with accessories 111.868.00.1 fastening distance can extend from 380 - 580 mm)

• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm• For washbasin with concealed wall-mounted tap• Disc for mounting the concealed wall-mounted tap

Characteristics

• Frame height 1120 mm to 1300 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Washbasin fastening distance 50 - 380 mm• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Fastening for outlet bend, adjustable height• Fastening plate for concealed fittings, veneered wood, waterproof

bonded, adjustable in height and depth• Self-locking feet for tool-free alignment of the frame, (friction feet have

to be locked with spanner)

Additional NoteOutlet bend ø 50 mm; Seal ø 44/32 mm; 2 threaded rods M10 for ceramics fastening; Fastening material


Geberit acoustic insulation set for washbasin

Application

• For solid-borne noise insulation with washbasins

Product Details

Additional Note2 acoustic insulation sleeves


Taps

Geberit washbasin tap type 185, generator, without mixer New

Application

• For cold or mixed water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top• Not suitable for flow < 3 l/min

Characteristics

• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply from generator and rechargeable battery• Power supply, self-sufficient• When used on average 20 times per day for a duration 4 s each time,

the basin mixer will work independently

Product Details

Additional NoteGenerator unit; Adapter for angle stop valve G 3/8; Metal-reinforced hose R 3/8"; Basket filter; Key for aerator; Fastening material



Article no. PU1 PU4

111.493.00.1 1 10

Product material PE expanded

Article no. PU1

156.051.00.1 1

50

0-20

0

73

80

52

112-130

5-38

48

85

0

11

60

20

05

Taps

Product material Chrome-plated brass

Activation distance factory setting 16–18 cm

Activation distance adjustment range 1–33 cm

Ambient temperature 1–40 °C


Flow rate at 3 bar 6 l/min

Max. operating temperature mixed water 45 °C

Battery type Li-ion (6,6 V)





6−15

≥ 19

84

77

115

02−38

3/8"

ø 27-38

ø 64

≥ 25

63

16125

25°

Product GuideTaps


Geberit washbasin tap type 186, genarator, without mixer New

Application

• For cold or mixed water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top• Not suitable for flow < 3 l/min

Characteristics

• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply from generator and rechargeable battery• When used on average 20 times per day for a duration 4 s each time,


Product Details

Additional NoteGenerator unit; Adapter for angle stop valve G 3/8; Metal-reinforced hose R 3/8"; Basket filter; Key for aerator; Fastening material



Geberit lavatory tap type 186, generator, with below-desk mixer New

Application

• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top• Not suitable for flow < 3 l/min

Characteristics

• Temperature pre-setting via below-desk mixer• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply from generator and rechargeable battery• When used on average 20 times per day for a duration 4 s each time,


Product Details

Additional NoteGenerator unit; Below-desk mixer; Adapter for angle stop valve G 3/8; 2 metal-reinforced hoses R 3/8"; 2 basket filters; Key for aerator; Fastening material















6−15

≥ 19

84

77

13

02−38

3/8"

ø 27-38

ø 64

63

1225°

95

≥ 25

Differentiated pressure CW/WW ≤ 1.5 bar













12−30

≥ 2484

77

3/8"

63

84

13

02−38

ø 27-38

ø 64

12 95

25°

≥ 25


Product GuideTaps

Geberit washbasin tap type 60, mains operation, without mixer, without power supply unit

Application

• For cold or mixed water connection• For installation in washbasin or work top

Characteristics

• Electrical power supply via power supply unit• Volume flow control with aerator• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Requires transformer 241.692.00.1

Product Details

Additional NoteConnection cable 1.7 m for power supply unit; Metal-reinforced hose R 3/8"; Filter; Fastening material



Geberit washbasin tap type 60, battery operated, without mixer

Application

• For cold or mixed water connection• For installation in washbasin or work top

Characteristics


Product Details

Additional Note6 V battery; Metal-reinforced hose R 3/8"; Filter; Fastening material





Activation distance factory setting 22 cm









115.740.21.1 gloss chrome 1 62

135

122

193

05-3

36 SW36

SW19

35

56

G 3/8

22










Battery type CR - P2 (6 V)


115.733.21.1 gloss chrome 1 62

135

122

193

05-3

36 SW36

SW19

35

56

G 3/8

22

Product GuideTaps


Geberit washbasin tap type 60, mains operation, with mixer and handle, without power supply unit

Application

• For cold and hot water connection• For installation in washbasin or work top

Characteristics


Product Details

Additional NoteConnection cable 1.7 m for power supply unit; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material



Geberit washbasin tap type 60, battery operated, with mixer and handle

Application

• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top

Characteristics

• Power supply by battery• Temperature adjustment via the mixer lever• Volume flow control with aerator• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy

Product Details

Additional Note6 V battery; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material; Key for aerator















115.738.21.1 gloss chrome 1 62

135

122

193

05-3

36 SW36

SW19

35

56

G 3/8

22














135

122

193

05-3

36 SW36

SW19

35

56

G 3/8

22


Product GuideTaps

Geberit washbasin tap type 60, mains operation, with mixer without handle, without power supply unit

Application


Characteristics

• Electrical power supply via power supply unit• Temperature pre-setting via the internal mixer• Volume flow control with aerator• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Requires transformer 241.692.00.1

Product Details

Additional NoteConnection cable 1.7 m for power supply unit; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material



Geberit washbasin tap type 60, battery operated, with mixer without handle

Application

• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work topCharacteristics

• Power supply by battery• Temperature pre-setting via the internal mixer• Volume flow control with aerator• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service HandyProduct Details

Additional Note6 V battery; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material; Key for aerator


Concealed 230 V power supply unit for Geberit washbasin tap type 60

Application• For concealed installation• For parallel connection of up to six Geberit washbasin taps with infra-

red controlProduct Details















115.739.21.1 gloss chrome 1 62

135

122

193

05-3

36 SW36

SW19

35

56

G 3/8

22
















Output voltage 9 V DC

Article no. PU1

241.692.00.1 1

135

122

193

05-3

36 SW36

SW19

35

56

G 3/8

22

55

55

Product GuideTaps


Geberit washbasin tap type 185, mains operation, without mixer

Application

• For cold or mixed water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top

Characteristics

• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1

Product Details

Additional NoteMetal-reinforced hose R 3/8"; Filter; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material



Application


Characteristics

• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set

Product Details

Additional NoteMetal-reinforced hose R 3/8"; Filter; 6 V battery; Key for aerator; Fastening material










Operating voltage 12 V AC


Operating pressure 0.5–8 bar


116.135.21.1 gloss chrome 1 81

115

25°

02-38

125

3/8"

Ø 27-38

Ø 64

14

448

16













115

25°

02-38

125

3/8"

Ø 27-38

Ø 64

14

448

16


Product GuideTaps

Geberit washbasin tap type 185, mains operation, with mixer and handle

Application


Characteristics

• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1

Product Details

Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material


Geberit washbasin tap type 185, battery-operated, with mixer and handle

Application


Characteristics

• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set

Product Details

Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; 6 V battery; Key for aerator; Fastening material
















115

25°

02-38

125

3/8"

Ø 27-38

Ø 64

14

448

16













116.255.21.1 gloss chrome 1 81

115

25°

02-38

125

3/8"

Ø 27-38

Ø 64

14

448

16

Product GuideTaps


Geberit washbasin tap type 185, mains operation, with mixer without handle

Application


Characteristics

• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1

Product Details




Application


Characteristics

• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set

Product Details

















115

25°

02-38

125

3/8"

Ø 27-38

Ø 64

14

448

16














115

25°

02-38

125

3/8"

Ø 27-38

Ø 64

14

448

16


Product GuideTaps


Application


Characteristics

• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1

Product Details

Additional NoteMetal-reinforced hose R 3/8"; Filter; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material



Application


Characteristics

• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set

Product Details

Additional NoteMetal-reinforced hose R 3/8"; Filter; 6 V battery; Key for aerator; Fastening material














116.136.21.1 gloss chrome 1 81

13

25°

02-38

95

3/8"

Ø 27-38

Ø 64

12

14

448












116.236.21.1 gloss chrome 1 81

13

25°

02-38

95

3/8"

Ø 27-38

Ø 64

12

14

448

Product GuideTaps



Application


Characteristics

• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1

Product Details



Geberit washbasin tap type 186, battery operated, with mixer and handle

Application


Characteristics

• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set

Product Details
















116.156.21.1 gloss chrome 1 81

13

25°

02-38

95

3/8"

Ø 27-38

Ø 64

12

14

448













116.256.21.1 gloss chrome 1 81

13

25°

02-38

95

3/8"

Ø 27-38

Ø 64

12

14

448


Product GuideTaps


Application


Characteristics

• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1

Product Details




Application


Characteristics

• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set

Product Details
















116.146.21.1 gloss chrome 1 81

13

25°

02-38

95

3/8"

Ø 27-38

Ø 64

12

14

448













116.246.21.1 gloss chrome 1 81

13

25°

02-38

95

3/8"

Ø 27-38

Ø 64

12

14

448

Product GuideTaps



Application

• For wall mounted installation• For public and semi-public areas• For concealed installation• For use in the hygiene area• For use in the industrial area• For use in the Geberit Duofix system• For cold or mixed water connection

Characteristics

• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature is not adjustable• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1

Product Details

Additional NoteNon-return valve; Filter; Key for aerator; 1.5 m connection cable; Fastening material

Excluded: Power supply unit



Application


Characteristics

• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature adjustment via the mixer lever• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1

Product Details

Additional Note2 non-return valves; 2 filters; Key for aerator; 1.5 m connection cable; Fastening material



Flow rate with tap aerator 6l/min

Product materialBrass / chrome-plated die-cast zinc

Flow rate >0.1 l/s

Relative humidity ≤ 100%




Operating temperature 1–40 °C








116.107.21.1 gloss chrome 1 60

13

13R1/2

15

5525°

25°

165

14



Flow rate >0.1 l/s












116.127.21.1 gloss chrome 1 60

13

13R1/2R1/2

15

5525°

25°

165

14


Product GuideTaps


Application


Characteristics

• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature pre-setting via the internal mixer• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1

Product Details





Application


Characteristics

• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature is not adjustable• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1

Product Details

Additional NoteNon-return valve; Filter; Key for aerator; 1.5 m connection cable; Fastening material





Flow rate >0.1 l/s












116.117.21.1 gloss chrome 1 60

13

13R1/2R1/2

15

5525°

25°

165

14


Flow rate >0.1 l/s













116.108.21.1 gloss chrome 1 60

13

13R1/2

215

19

15

5525°

25°

Product GuideTaps



Application


Characteristics

• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature adjustment via the mixer lever• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1

Product Details





Application


Characteristics

• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature pre-setting via the internal mixer• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1

Product Details






Flow rate >0.1 l/s












116.128.21.1 gloss chrome 1 60

13

13R1/2R1/2

215

19

15

5525°

25°



Flow rate >0.1 l/s












116.118.21.1 gloss chrome 1 60

13

13R1/2R1/2

215

19

15

5525°

25°


Product GuideTaps

Power supply unit for Geberit washbasin tap type 185/186 and 85–88

Application

• For power supply of tap type 87/88 and tap type 185/186

Characteristics

• Power supply of up to 8 taps• Transformation of mains voltage to extra-low voltage

Product Details


Geberit installation set with mains transformer

Application

• For concealed installation in solid or drywall construction• For power supply of tap type 87/88 and tap type 185/186

Characteristics

• Power supply of up to 8 taps• Transformation of mains voltage to extra-low voltage

Product Details

Additional NotePower supply unit; Concealed outlet for drilling diameter ø 76 mm; Cover for concealed outlet; Conduit pipe, 1.7 m


Geberit concealed base unit set HANSAVAROX, for MeplaFix

Characteristics

• MeplaFix system elbow made from dezincification-resistant brass• Acoustically decoupled• For wall mounting tap type 87/88 wall-hung taps

Additional Note2 MeplaFix system elbows, pre-mounted; 1 MeplaFix system elbow, loose, with seal; Rubber collar; Fastening ring


Converting set generator for washbasin tap New

Application

• For conversion of washbasin tap type 185/186 to power supply from generator

• For connection to washbasin tap type 185/186 with cold or mixed water operation

• Not suitable for flow < 3 l/min

Characteristics

• Power supply from generator and rechargeable battery• Power supply, self-sufficient• When used on average 20 times per day for a duration 4 s each time,


Additional NoteGenerator unit; Power adapter, resource-saving; Adapter for angle stop valve G 3/8; Metal-reinforced hose R 3/8"; Basket filter




Output voltage 12 V AC

Article no. PU1

241.672.00.1 1



Output voltage 12 V AC


Article no. PU1

241.631.00.1 1

77

77

Article no. R''

Dcm

D1cm

Hcm

Lcm

L1cm

lcm

Zcm

616.030.00.1 MF 1/2 10,4 11 7 14 11 2 5,5

Article no. PU1

116.450.00.1 1

L

RR

Z

H H

Z

D1

L1

l

D

Product GuideDuofix bidet frames


Wall mounting set for generator unit New

Application

• For wall mounting of the generator unit

Additional NoteAngle bracket; Adapter; Metal-reinforced hose R 3/8"; Fastening material



Battery charger for generator unit New

Application

• For charging the generator unit• For troubleshooting with lavatory tap and generator unit



Duofix bidet frames

Geberit Duofix frame for bidet, H112

Application

• For installation of a wall-hung bidet with bolt fixings set at 180 or 230 mm centres

• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm

Characteristics

• Frame height 1120 mm• Bidet fastening distance 180 mm or 230 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• With wall brackets to allow up to a 200 mm duct. For larger ducts up


connection



Article no. PU1

116.451.00.1 1

Article no. PU1

116.452.00.1 1

Duofix bidet frames

Article no. PU1

111.545.00.1 1

8090

100110

120130

140150

160170

180190

200210

220230

240250

260270

280290

300310

320330

340 350

360 964.161.00.0

8090100110

120130140150

160170180190

200210220230

240250260270

280290300310

320330340 350

360 964.162.00.0

964.160.00.0

112

50

100

0-20

0

73

18/238-38

48

10

0-20

4

0


Product GuideDuofix bidet frames


Application



• For mounting in front of a solid or drywall construction (order PreWall brackets 111.844.00.1 separately)


Characteristics



connection




Application



• For mounting in front of a solid or drywall construction (order PreWall brackets 111.844.00.1 separately)


Characteristics



connection



Article no. PU1

111.544.00.1 1

964.160.00.0

964.160.00.0

98

50

0-20

0

73

18/23

8-38

48

10

0-20

4

0

Article no. PU1

111.543.00.1 1

8090

100110

120130

140150

160170

180190

200210

220230

240250

260270

280290

300310

320330

340 350

360 964.161.00.0

8090100110

120130140150

160170180190

200210220230

240250260270

280290300310

320330340 350

360 964.162.00.0

964.160.00.0

82

50

0-20

0

73

18/23

8-38

48

10

0-20

4

0

Product GuideDuofix urinal frames


Duofix urinal frames

Geberit Duofix frame for urinal, H130, flush pipe with pipe interrupter for mains fed water supply

Application

• For installation of wall-hung urinals• For installation in a Duofix system wall in front of solid or drywall

construction• For installing in a load bearing stud wall• For mounting in front of a solid or drywall construction (order PreWall

brackets 111.844.00.1 separately)• For a screed of 0 - 200 mm (not in room height applications)• For mains fed water supply (note: Geberit urinal controls need a

minimum 1 bar supply)• For Geberit concealed urinal control• Not suitable for urinals with spreaders

Characteristics

• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame height from 112 cm to 130 cm, depending on urinal• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture

and dirt and can be mounted without tools and cut to length• Flexible connection hose between concealed housing and inlet• Inlet ø 32 mm, height-adjustable• Fastening for urinal with M8 threaded rod, adjustable height and

distance• Fastening for outlet bend sound-absorbing and height-adjustable• Self-locking feet for tool-free alignment of the frame, (friction feet have

to be locked with spanner)• Additional fastening possible for urinal with accessories• Conversion possible for urinals with spray head with accessories• Mechanical pipe interruptor for mains water connection• Please see page 123 for details of pipe interruptor drainage installation

Product Details

Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"; Connection pipe between inlet ø 32 mm and urinal, incl. seal on urinal; Suction trap ø 50 mm, incl. seal to urinal; Outlet pipe, PVC, ø 50 mm, incl. seal on the suction trap; 2 threaded rods M8 for urinal fastening; Fastening material; To be installed with a check valve or similar providing backflow prevention protection

Excluded: Urinal flushing system



1300

320-360

0-200

0

73

500

75-330

R1/2

1000

75 90

48

0

1180

Flow rate at 1 bar without flow limiter 0.3 l/s

Flow rate at 1 bar with flow limiter 0,24 l/s

Relative humidity < 100 %


Max. test pressure water 16 bar

Max. test pressure air / inert gas 3 bar


Article no. PU1

111.622.00.1 1



Geberit Duofix frame for urinal, H130, for tank fed water supply

Application

• For tank fed water supply with a dedicated source only (note: Geberit urinal controls need a minimum 1 bar supply)

• For installation of wall-hung urinals• For mains fed water with urinals Ideal Standard Jasper Morrison,

Villeroy & Boch Omina Classic (#7557), Duravit Starck 3 (#082135), Kohler Odela

• For installation in a half-height Duofix system wall in front of a solid or drywall construction

• For installation in a room-high Duofix system wall in front of a solid or drywall construction

• For installing in a load bearing stud wall• For mounting in front of a solid or drywall construction (order PreWall

brackets 111.844.00.1 separately)• For a screed of 0 - 200 mm (not in room height applications)• For Geberit concealed urinal control• Not suitable for urinals with spreaders

Characteristics

• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame height from 112 cm to 130 cm, depending on urinal• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture

and dirt and can be mounted without tools and cut to length• Flexible connection hose between concealed housing and inlet• Inlet ø 32 mm, height-adjustable• Fastening for urinal with M8 threaded rod, adjustable height and

distance• Fastening for outlet bend sound-absorbing and height-adjustable• Self-locking feet for tool-free alignment of the frame, (friction feet have

to be locked with spanner)• Additional fastening possible for urinal with accessories• Conversion possible for urinals with spray head with accessories

Product Details

Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"; Connection pipe between inlet ø 32 mm and urinal, incl. seal on urinal; Suction trap ø 50 mm, incl. seal to urinal; Outlet pipe, PVC, ø 50 mm, incl. seal on the suction trap; 2 threaded rods M8 for urinal fastening; Fastening material; To be installed with a check valve or similar providing backflow prevention protection

Excluded: Urinal flushing system









112-130

17-37

max. 65

0-20

0

min. 9

12-32

73

50

75-33

R1/2

48

75 9

100-118

0

0-20

Article no. PU1 PU4

111.623.00.1 1 14



Installation set for Geberit urinal flush control, electronic, plastic nipple

Application

• For concealed installation in solid constructions• For accommodating the touchless and pneumatic urinal controls• For mains fed water with urinals Ideal Standard Jasper Morrison,


• For tank fed water supply (note: Geberit urinal controls need a minimum 1 bar supply)

Characteristics

• Water connection at the top centre• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture

and dirt and can be mounted without tools and cut to length

Product Details

Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"; To be installed with a check valve or similar providing backflow prevention protection


Installation set for Geberit urinal flush control, electronic, with flush pipe

Application

• For concealed installation in solid constructions• For accommodating the touchless and pneumatic urinal controls• For tank fed water supply (note: Geberit urinal controls need a

minimum 1 bar supply)• For mains fed water with urinals Ideal Standard Jasper Morrison,


Characteristics

• Water connection at the top centre• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture

and dirt and can be mounted without tools and cut to length

Product Details

Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"; Flush pipe D32; To be installed with a check valve or similar providing backflow prevention protection






Relative humidity 95 %


Article no. PU1

116.001.00.1 1

15

105

117

R1/2

15

105

7 1-9





Relative humidity 95 %


Article no. PU1

116.003.00.1 1

max. 61

15

105

R1/2

15

105

7 1-9



Duofix mounting plate for urinal division

Application

• For installation in a half-height Duofix system wall in front of a solid or drywall construction

• For installation in a room-high Duofix system wall in front of a solid or drywall construction

• For installation in a load bearing stud wall• For installation of urinal division

Characteristics

• Multi-layered, water-resistant bonding• Veneered wood plate• Can be cut to reduce distance between urinals

Product Details

Additional Note8 fastening brackets; Fastening material


Geberit urinal division, plastic

Application

• For separating urinals mounted adjacent to one another

Characteristics

• Plastic urinal partition with concealed fastening• Corrosion-resistant bracket, hard-anodised surface

Additional NoteDistance bolts; Fastening material


Geberit urinal division, glass, oval

Application

• For separating urinals mounted adjacent to one another • For mounting on solid or drywall constructions

Characteristics

• Concealed installation• Corrosion-resistant bracket, hard-anodised surface• Matt glass surface on both sides

Product Details

Additional NoteWall bracket; Cover; Fastening material


Geberit urinal division, glass, rectangular

Application

• For separating urinals mounted adjacent to one another • For mounting on solid or drywall constructions

Characteristics

• Concealed installation• Corrosion-resistant bracket, hard-anodised surface• Matt glass surface on both sides

Product Details

Additional NoteWall bracket; Cover; Fastening material


Product material Wood

Article no. PU1 PU4

111.859.00.1 1 40


115.200.11.1 white 1 16

35

50

74

44

92-98

0

Product material ESG - (toughened safety glass)


115.210.CD.1 light grey RAL7035 1 15

115.210.GT.1 light green RAL6027 1

Product material ESG - (toughened safety glass)


115.214.CD.1 light grey RAL7035 1 15

115.214.GT.1 light green RAL6027 1 15

9350

525

95-105

0 4

08

35

75

75

80

496

95-105

0

50

35

4

08

75

75



Geberit urinal flush control, pneumatic, Sigma01New

Application

• For manual flush actuation of urinals• For assembly in urinal installation set

Characteristics

• Manual flush actuation• Low flush actuation force• Flush actuation when the flush button is released• Flush time setting with air nozzles (pneumatic)• Plastic flush plate, with securing bar

Product Details

Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material


Geberit urinal flush control, electronic, mains operation, Sigma01 New

Application

• For automatic flush actuation of urinals• For assembly in urinal installation set

Characteristics

• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar

Product Details

Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Power supply unit; Solenoid valve; Fastening material










Flush time range 4 / 8 / 12 s


116.011.11.5 white alpine 1 10

116.011.21.5 gloss chrome 1 10

116.011.46.5 matt chrome 1 10

13

13

09



Power consumption < 0.5 W










Flush time factory setting 4 s

Flush time range 3–15 s

Activation time 7 s





116.021.11.5 white alpine 1 10

116.021.21.5 gloss chrome 1 10

116.021.46.5 matt chrome 1 10

13

13

09



Geberit urinal flush control, electronic, battery operated, Sigma01 New

Application

• For automatic flush actuation of urinals• For assembly in urinal installation set

Characteristics

• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar

Product Details

Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Battery box; 2 lithium batteries; Solenoid valve; Fastening material


Geberit urinal flush control, pneumatic, Sigma10

Application

• For manual flush actuation of urinals• For assembly in urinal installation set

Characteristics


Product Details






Battery type Lithium battery 1.5 V (AA)

Lifetime lithium battery ~ 2 years

Lifetime alkaline battery ~ 1.5 years










Activation time 7 s







116.031.46.5 matt chrome 1

13

13

09











116.015.KH.1 gloss chrome / matt chrome / gloss chrome 1

116.015.KJ.1 white / gloss chrome / white 1

116.015.KK.1 white / gold-plated / white 1

116.015.KL.1 white / matt chrome / matt chrome 1

116.015.KM.1 black / gloss chrome / black 1

116.015.KN.1 matt chrome / gloss chrome / matt chrome 1

13

13

13



Geberit urinal flush control, electronic, mains operation, Sigma10

Application

• For automatic flush actuation of urinals• For assembly in installation set

Characteristics


Product Details



Geberit urinal flush control, electronic, battery operated, Sigma10

Application


Characteristics


Product Details

















Activation time 7 s











13

13

1
















Activation time 7 s











13

13

1



Geberit urinal flush control, pneumatic, Sigma50, for customisation

Application

• For manual flush actuation of urinals• For assembly in installation set

Characteristics

• Manual flush actuation• Low flush actuation force• Flush actuation when the flush button is released• Flush time setting with air nozzles (pneumatic)• Die-cast zinc flush plate, with securing bar

Product Details



Geberit urinal flush control, pneumatic, Sigma50

Application


Characteristics


Product Details













116.016.00.1 for customisation 1

13

13

14












116.016.DW.1 black RAL 9005 1

116.016.EP.1 pergamon 1

116.016.SE.1 green satinised 1

116.016.SD.1 smoked glass reflective 1

116.016.SC.1 white grains 1

13

13

14



Geberit urinal flush control, electronic, mains operation, Sigma50

Application


Characteristics


Product Details



Geberit urinal flush control, electronic, battery operated, Sigma50

Application


Characteristics


Product Details

















Activation time 7 s






13

13

1
















Activation time 7 s






13

13

1



Geberit urinal flush control, pneumatic, Bolero

Application


Characteristics


Product Details



Geberit urinal flush control, electronic, mains operation, Bolero

Application


Characteristics


Product Details















116.012.46.1 matt chrome 1

13

13

12















Activation time 7 s







116.022.46.1 matt chrome 1

13

13

12



Geberit urinal flush control, electronic, battery operated, Bolero

Application


Characteristics


Product Details



Geberit urinal flush control, pneumatic, Mambo

Application


Characteristics

• Manual flush actuation• Low flush actuation force• Flush actuation when the flush button is released• Flush time setting with air nozzles (pneumatic)• Stainless steel flush plate, with securing bar

Product Details


















Activation time 7 s







116.032.46.1 matt chrome 1

13

13

12











116.013.FW.1 brushed stainless steel 1

13

13

13



Geberit urinal flush control, electronic, mains operation, Mambo

Application


Characteristics

• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Stainless steel cover plate, with securing bar

Product Details



Geberit urinal flush control, electronic, battery operation, Mambo

Application


Characteristics

• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Stainless steel cover plate, with securing bar

Product Details

















Activation time 7 s






13

13

11
















Activation time 7 s






13

13

11



Geberit urinal flush control, pneumatic, Tango

Application


Characteristics


Product Details



Geberit urinal flush control, electronic, mains operation, Tango

Application


Characteristics


Product Details















116.014.46.1 matt chrome 1

13

13

11















Activation time 7 s







116.024.46.1 matt chrome 1

13

13

08


Product GuideAccessories

Geberit urinal flush control, electronic, battery operated, Tango

Application


Characteristics


Product Details



Accessories

Geberit Duofix room-height stud

Application

• For creating a load bearing stud wall• For installation in a room-high Duofix system wall• For installing as intermediate or connecting element• For fastening Duofix installation elements and Duofix cross bars• Suitable for installation under sloping roofs up to 50° roof slope

Characteristics

• Galvanised• Height-adjustable (telescopic)

Product Details

Additional Note1 rail clip; Fastening bracket; Fastening material

















Activation time 7 s







116.034.46.1 matt chrome 1

13

13

08

Accessories

Product material Steel

Article no. Hcm

hcm

PU1

111.871.00.1 220 - 280 211 1

111.872.00.1 260 - 320 251 1

111.873.00.1 300 - 360 291 1

111.874.00.1 340 - 400 331 1

h

H

47

5

47

5



Geberit Duofix part-height stud, height 82–130 cm

Application

• For installation in split-height PreWall construction in front of a solid or drywall construction



Characteristics

• Element height 820 - 1300 mm• Self-supporting• Support for lateral panelling• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Rotating foot plate, for installation in UW50 and UW75 profiles• Powder-coated, colour Geberit blue

Product Details

Additional NoteRear wall fastening; 2 rail clips; Fastening material


Geberit Duofix system rail set

Application

• For construction of Duofix PreWall or partition wall• For erecting room-high Duofix system wall

Characteristics

• Galvanised

Additional Note2 U-rails; Fastening material


Geberit support brackets for ceramic WC appliances with small contact surface

Application

• For additional support of WC pans with contact surfaces (x) smaller than 170 mm

• For use with Geberit Duofix WC frames

Characteristics

• U-profiles, galvanised

Product Details


Geberit Duofix foot fastening to rear wall

Application

• For alternatively fastening the feet of Duofix elements to the rear wall instead of the floor

Characteristics

• Galvanised• Adjustable depth, 130 - 200 mm

Product Details





111.830.00.1 1 5 50

Article no. PU1 PU4

111.878.00.1 1 80

82-130

4

0-20

0

73

4

48

300

5

34


Article no. PU1

111.847.00.1 1


Article no. PU1

111.867.00.1 1

X

13 - 20



Geberit fastening set for washbasins with fastening distance 38–58 cm

Application

• For fastening washbasins with a fastening distance larger than 380 mm to Duofix frame for washbasin

Characteristics

• Fastening distance adjustable 380 - 580 mm• Galvanised

Product Details



Geberit fastening set for stud clearance of 50–57.5 cm

Application

• For fastening Duofix frames between two studs with a distance of 50 - 65 cm

Characteristics

• Galvanised

Product Details



Geberit Duofix fastening bracket New

Application

• For fastening Geberit Duofix installation elements to Duofix room-height studs or Duofix studs for drywall construction

Product Details



Geberit Duofix wall anchoring for system set

Application

• For fastening Duofix frames in Duofix system rail• For fastening Duofix frames in front of solid or drywall construction

Characteristics


Product Details

Additional Note2 Duofix PreWall brackets for system; 2 rail clips; 2 panelling supports, push-in; Fastening material


Geberit Duofix wall anchoring with extension

Application

• For fastening Duofix frames in front of solid or drywall construction• Not suitable for use with Duofix system rail

Characteristics


Product Details

Additional Note2 PreWall brackets; 2 M10 threaded rods with long nut; 2 Duofix PreWall bracket extensions M10 with long nut; 2 panelling supports, push-in; Fastening material



Article no. PU1

111.868.00.1 1


Article no. PU1

111.869.00.1 1


Article no. PU2 PU3

240.419.00.1 2 20



111.844.00.1 1 8 384


Article no. PU1

111.843.00.1 1

13-20

13-20



Geberit Duofix wall anchoring for corner installation

Application

• For universal fastening of Duofix installation elements to a solid or drywall construction

Characteristics

• Variable angle adaptation for corner installation• Adjustable depth, 140 - 200 mm• Galvanised

Additional Note2 PreWall brackets; 2 M10 threaded rods with long nut; Fastening material

Excluded: Panelling supports, push-in


Geberit Duofix wall anchoring extension

Application

• For extending Duofix wall anchorings from 200 - 400 mm

Product Details

Additional Note2 M10 threaded rods with long nut


Geberit panel screw

Application

• For fastening of the panelling and Aqua plasterboard panels to the Duofix support system

Characteristics

• Self-drilling screws 4.2 x 35 mm


Geberit Duofix hexagon/cross-head self drilling screw 5.5 x 19 mm

Characteristics

• Self-cutting, 5.5 x 19 mm• Galvanised


Geberit Duofix insulation tape

Application

• To avoid the formation of cracks between Duofix panelling and building structure

Characteristics

• Single-sided self-adhesive• Permanently elastic• Vinyl foam tape


Geberit Service Handy

Application

• For setting and enquiry of setting values of various electronic Geberit products such as washbasin taps, WC flush actuators, urinal controls and sanitary flushings

Characteristics

• 4-line display• Menu guidance• Saving and transfer of settings to other control units of the same type• Compatible with existing control units• Data transmission with infra-red light• Battery-operated

Additional NotePouch; 3 batteries type AAA 1.5 V



111.835.00.1 1 20 560



111.887.00.1 1 10 2000

Article no. PU2 PU3

461.030.00.1 200 2000

14-20

220 M10

Article no. PU2

111.892.00.1 50

Article no. PU1 PU4

111.889.00.1 1 60

Article no. PU1

115.860.00.1 1

30 m

1

8



Geberit Clean Handy

Application

• For deactivation of infra-red controlled Geberit flushing valves and flush actuators for sanitary cleaning

Characteristics

• Remote control

Additional NoteConcise instructions


Cup for flush volume 4.5/3L, for Geberit Kappa concealed cistern 15 cm (UP200)

Application

• For Geberit concealed cistern UP200• For reducing flushing volumes to 4.5 l and 3l• Should only be used in conjunction with WCs suitable for low flushing

volumesOrdering Information

Cup for flush volume 4.5/3L, Geberit Sigma concealed cistern 12 cm (UP320)

Application

• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For reducing flushing volumes to 4.5 l and 3l• Should only be used in conjunction with WCs suitable for low flushing

volumes


Active carbon filter for Sigma40 odour extraction

Application

• For use with Sigma40 actuator plate with integrated odour extraction


Article no. PU1 PU2

115.831.00.1 1 10

Article no. PU1

242.310.00.1 1

Article no. PU1

241.894.00.1 1

Article no. PU1

242.555.00.1 1

Product GuideDrainage


Drainage

Geberit HDPE straight connector with ring seal socket

Application

• For all drainage pipes• For push-on seal• For WCs with horizontal outlet• For Duofix WC frames

Characteristics

• UV-resistant

Product Details

Additional NoteLip seal EPDM; Protection cap


Geberit PVC S-bend 90/110

Product Details

Additional NoteLip seal EPDM; Sealing collar EPDM; Adhesive PVC-U


Drainage

Product material PE-HD

Article no. dØmm

d1Ømm

Dcm

Lcm

lcm

Kcm

Colour PU1 PU3 PU4

366.887.16.1 90 90 11,2 31 27,5 24 black 1 40 160

367.887.16.1 110 90 11,2 34,5 31,5 28 black 1 30 120

Product material PVC

Article no. dØmm

ADcm

Hcm

Colour PU1 PU2 PU4

388.350.29.1 90 14,5 - 34,5 16,7 grey 1 10 80

d1d

L

D

l

K

dAD

H

di



Geberit HDPE connector bend 90° with coupling and ring seal socket for Geberit Duofix frame for wall-hung WC

Application

• For all drainage pipes• For WCs with horizontal outlet• For Duofix WC elements

Characteristics

• UV-resistant

Product Details



Geberit HDPE connector bend 90° with coupling with ring seal socket

Application

• For all drainage pipes• For appliances with horizontal outlet

Characteristics

• UV-resistant

Product Details



Angle 90°


Article no. dØmm

d1Ømm

Acm

angle Hcm

Kcm

Colour PU1 PU2 PU4

366.061.16.1 90 90 11 90° 22,5 13 black 1 10 120

Angle 90°


Article no. dØmm

d1Ømm

Acm

angle acm

Hcm

Kcm

Colour PU1 PU2 PU3 PU4

367.792.16.1 110 110 7,5 90° 4,5 22,5 13 black 1 5 25 100

A

KH

d1

d

A

KH

a

d1

d



Geberit HDPE connector bend 45° with connection ring seal socket

Application

• For all drainage pipes• For WCs with horizontal outlet• For Duofix WC frames

Characteristics

• UV-resistant

Product Details



Geberit PE adaptor sleeve

Application

• For all drainage pipes• For connecting 90 mm PE connectors to 110 mm sockets

Characteristics

• UV-resistant• With stop

Product Details

Additional NoteLip seal EPDM


Angle 45°


Article no. dØmm

d1Ømm

angle acm

Lcm

Kcm

Colour PU1

367.945.16.1 110 90 45° 6 8,7 3 black 1


Article no. d1Ømm

d2Ømm

Colour PU1 PU2 PU4

367.928.16.1 90 110 black 1 10 600

45

d

K

d1

a

L

75

d2d1



Geberit PVC connector manifold with coupling with ring seal socket for Geberit Duofix frame for wall-hung WC

Application

• For all drainage pipes• For Duofix WC frames when using floats

Product Details

Additional NoteManifold connector bend; Fin seal; 50 mm length of 110 mm PVC pipe


Geberit WC collar set, extended, with fastening material

Application

• For Duofix WC frames

Product Details

Additional Note2 cover caps


Product material PVC

Article no. dØmm

angle°

Z1cm

Z2cm

Colour PU1 PU3 PU4

107.35.05B 110 5° 0,64 6,23 black 1 12 360

F107.35.09B 110 9° 0,89 6,28 black 1 24 720

107.35.14B 110 14° 1,09 6,47 black 1 12 360

F107.35.18B 110 18° 1,13 6,47 black 1 12 360

107.35.24B 110 24° 1,4 6,95 black 1 12 360

F107.35.29B 110 29° 1,83 7,73 black 1 12 360

107.35.34B 110 34° 1,83 7,73 black 1 12 360

Product material PE

Article no. dØmm

d1Ømm

Lcm

L1cm

lcm

l1cm

Colour PU1 PU4

152.438.46.1 90 45 26,5 26,5 22 24 black and matt chrome 1 164

Z1Z2

d d

l1

d1 55

102±5d

L1

l

L



Geberit PE flush pipe extension for concealed cistern

Application

• For extension of outlet sleeves• For combination with overflow pipe cone

Product Details


Product material PE

Article no. dØmm

diØmm

smm

Acm²

Lm

Colour PU1 PU2 PU4

152.170.16.1 45 40 2,5 12,6 1 black 1 5 270

L (m)

d

s

di

Acm2

d


Product GuideTraps

Traps

Geberit washbasin trap, PVC connection

Application

• For washbasin

Characteristics

• Water seal with partition wall• Corrosion-resistant• Plug connection on the outlet pipe• With 32 mm / 1 1/4" waste adaptor

Product Details


Geberit bath drain, with ready-to-fit set, PVC adapter

Characteristics

• Without contraflow principle• Bathtub outlet and overflow assembly• Water seal• Pop-up operation• Outlet connection can be rotated as needed• With 40 mm / 1 1/2" waste adaptor

Additional NoteTrap; Cable actuator; Overflow; Outlet bend; Adaptor; Fastening material; Outlet cover


Traps

Depth of water seal 75 mm

Drainage capacity 0.7 l/s




150.535.21.1 gloss chrome 1 10

100

4340

160-30050

12040

92

180

180

Product GuideTraps


Geberit bath drain, with ready-to-fit set, PVC adaptor, extra long

Characteristics

• Without contraflow principle• Bathtub outlet and overflow assembly• Water seal• Pop-up operation• Outlet connection can be rotated as needed• With 40 mm / 1 1/2" waste adaptor

Additional NoteTrap; Cable actuator; Overflow; T-piece; Outlet bend; Adaptor; Fastening material; Outlet cover


Geberit bath drain with inlet, with ready-to-fit set, PVC adaptor

Characteristics

• Bathtub drain, overflow and inlet set• Water seal• Pop-up operation• Outlet connection can be rotated as needed• Direction of inlet jet flexible• Water supply connection bracket can be rotated • Water supply connection bracket suitable for Geberit Mepla pipes• Without contraflow principle• With 40 mm / 1 1/2" waste adaptor

Additional NoteTrap; Cable actuator; Overflow; Water inlet; Water supply connection bracket; Outlet bend; Adaptor; Fastening material; Outlet cover



150.536.21.1 gloss chrome 1 8

100

4340

160-30050

12040

92

180

180


150.712.21.1 gloss chrome 1 12

100

4340

160-30050

3/4"/ 16

12040

92

180

180


Product GuideTraps

Geberit bath drain with inlet, with ready-to-fit set, PVC adaptor, extra long

Characteristics

• Bathtub drain, overflow and inlet set• Water seal• Pop-up operation• Outlet connection can be rotated as needed• Direction of inlet jet flexible• Water supply connection bracket can be rotated • Water supply connection bracket suitable for Geberit Mepla pipes• Without contraflow principle• With 40 mm / 1 1/2" waste adaptor

Additional NoteTrap; Cable actuator; Overflow; Water inlet; T-piece; Water supply connection bracket; Outlet bend; Adaptor; Fastening material; Outlet cover


Geberit PushControl bath drain, d52

Application

• For bathtubs with valve hole ø 52 mm• For bathtubs in standard size• To fit most european bath tubs

Characteristics

• Bathtub drain with push button actuation virtually flush with the tub• Construction height trap 90 mm• Odour trap 270° swivelling• Drain valve made from stainless steel• With 40 mm / 1 1/2" waste adaptor

Product Details

Additional NoteDrain valve; Trap; Overflow; Cable actuator; Ready-to-fit set; Outlet pipe



150.713.21.1 gloss chrome 1 12

100

4340

160-30050

3/4"/ 16

12040

92

180

180

Drainage capacity 1 l/s

Overflow capacity 0.65 l/s



150.770.11.1 white alpine 1 10 80

150.770.21.1 gloss chrome 1 10 80

145-26

23-46

45

59 89

14 10

4340

Product GuideTraps


Geberit PushControl bath drain, d52, extra long

Application

• For bathtubs with valve hole ø 52 mm• For installation in bathtubs with special lengths• To fit most european bath tubs

Characteristics


Product Details



Geberit PushControl bath drain, d52, extra high

Application

• For bathtubs with valve hole ø 52 mm• For installation in bathtubs with special heights• To fit most european bath tubs

Characteristics


Product Details



Geberit connection set for acrylic bath with overflow

Application

• For acrylic bath with overflow

Additional NoteDrain valve seat extension with O-ring; Banjo bolt; Adjusting screw






150.771.11.1 white alpine 1 10 80

150.771.21.1 gloss chrome 1 10 80

24-50

23-46

45

59 89

4340

14 10





150.772.11.1 white alpine 1 10 80

150.772.21.1 gloss chrome 1 10 80

Article no. PU1

150.247.00.1 1

15-28

44-60

45

59 89

4340

14 10

27


Product GuideTraps

Geberit shower drain, d90, with ready-to-fit set, adaptor PVC

Application

• For shower trays with valve hole ø 90 mm• For shower trays without overflow

Characteristics

• Dip tube and dip tube support can be dismantled• Construction height 80 mm• With 40 mm / 1 1/2" waste adaptor

Product Details

Additional NoteTrap; Screw connection ø 40 mm; Outlet bend; Adaptor; Fastening material; Outlet cover


Geberit shower drain, d50, with ready-to-fit set, adaptor PVC

Application

• For shower trays with valve hole ø 52 mm • For shower trays without overflow

Characteristics

• Dip tube and dip tube support can be dismantled• Construction height 85 mm• With 40 mm / 1 1/2" waste adaptor

Product Details

Additional NoteTrap; Outlet bend; Adaptor; Outlet cover


Geberit Duofix shower frame, H130, outlet bend d50

Application

• For use within buildings• For drainage of wet room installations• For use with composite seals• For installation in a half-height Duofix system wall in front of a solid or

drywall construction• For installation in a room-high Duofix system wall• For screeded floors

Characteristics

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Floor construction maximum 20 cm• Minimum height of screed 90 mm• Panelling thickness 10–25 mm, sealing level can be adjusted up to

15 mm• Possible tile build-up 6–26 mm• Height-adjustable element• Mounting plate (wood) for surface-mounted and concealed taps,

height- and depth-adjustable• Mounting plate (metal) for surface-mounted taps, height-adjustable• Sealing level for sealing connection that is free of tension• Outlet body with drainage capacity of 0.85 l/s• Trap insert can be removed for cleaning• Drainage connection left, right or front centre• Speak to us about our partnership with wet room floor specialists

Additional NoteFastening material; Bidet outlet bend, HDPE, ø 50 mm; Outlet bend HDPE ø 50 mm for front connection

Excluded: Ready-to-fit set for shower element; Tap connections



Drainage capacity with 15 mm head of water 0.5 l/s





Article no. dØ Colour PU1 PU2

150.688.21.1 40 gloss chrome 1 10

115

02 25-

92

43 8

ø 90ø40ø43

47

03-15

85

85

47

8

ø40ø43

Article no. PU1

111.731.00.1 1

50

130

100

9

55

9–20

73

0

24

77

48

11

11

0

100

65

355355

5

45°

245

24

8

16

Product GuideTraps


Geberit Duofix shower frame, H50, outlet bend d50

Application

• For use within buildings• For drainage of wet room installations• For use with composite seals• For installation in a partial-height Duofix system wall in front of a solid

or drywall construction• For installation in a room-high Duofix system wall• For wooden beams or screeded floors

Characteristics

• Trap can be moved to below finished floor level for installation into wooden floors (see Note)

• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Floor construction maximum 20 cm• Panelling thickness 10–25 mm, sealing level can be adjusted up to

15 mm• Possible tile build-up 6–26 mm• Height-adjustable element• Sealing level for sealing connection that is free of tension• Outlet body with drainage capacity of 0.85 l/s• Trap insert can be removed for cleaning• Drainage connection left, right or front centre• Speak to us about our partnership with wet room floor specialists

Product Details

Additional NoteFastening material; Bidet outlet bend, HDPE, ø 50 mm; Outlet bend HDPE ø 50 mm for front connection

Excluded: Ready-to-fit set for shower element


NoteContact Geberit to discuss available floor options

Geberit ready-to-fit set for Geberit shower frame, stainless steel

Application

• For use with Geberit Duofix shower frame

Characteristics

• Can be removed for cleaning• Plastic sight frame, mother-of-pearl silver• Brushed stainless steel cover

Additional NoteSight frame; Cover; Hair trap


Geberit ready-to-fit set for Geberit shower frame, plastic

Application


Characteristics

• Can be removed for cleaning• Plastic sight frame, mother-of-pearl silver• Plastic cover


Ordering InformationDepth of water seal 50 mm

Article no. PU1

111.743.00.1 1

50

9

55

41

9–20

77

24

73 48

11

65

355355

5

45°

245

24

8

16


154.330.FW.1 brushed stainless steel 1 21


154.330.21.1 gloss chrome 1 21

154.330.11.1 white alpine 1 21


Product GuideTraps

Geberit ready-to-fit set for Geberit shower frame, for tiles

Application


Characteristics

• Can be removed for cleaning• Plastic sight frame, black• For customers to install a bespoke finish with a thickness of 6 mm -

26 mm



Geberit drain for floor even shower

Application

• For the drainage of a wet room installation• For use with composite seals• For use within buildings

Characteristics

• Minimal construction height 95 mm and maximum 195 mm• Grating made of stainless steel• Sealing collar, fleece-laminated 500 x 500 mm• Vernier adjustment of grating in height, inclination and off-set possible

via compensating ring• With 40 mm / 1 1/2" waste adaptor

Product Details

Additional NoteTrap; Adaptor; Thin bed top piece; Grating; Rubber collar; Compensating ring; Hair trap; Seal set for use with PVC ; Protection housing; Installation aid


Geberit grating, screwable

Application

• For Outlet for floor even showers

Characteristics

• Can be locked with screws• Grating and screws made of stainless steel

Product Details

Additional NoteScrews


Geberit design grating - architectural, squares

Application

• For the drainage of a wet room installation

Characteristics

• Without screw connection

Product Details


Geberit design grating - architectural, radial

Application


Characteristics


Product Details


Article no. PU1 PU2

154.330.00.1 1 21

Drainage capacity min. 0.45 l/s

Drainage capacity max. 0.74 l/s


Article no. PU1

154.005.00.1 1

1-11

85

145

59

30

10ø40ø43


Article no. PU1

154.300.00.1 1


Article no. PU1

154.301.00.1 1


Article no. PU1

154.302.00.1 1

91

91

05

Product GuideTraps


Geberit design grating - trendy

Application


Characteristics


Product Details


Geberit design grating - classic, natural

Application


Characteristics


Product Details


Geberit design grating - puristic, square

Application


Characteristics


Product Details


Geberit design grating - puristic, circle

Application


Characteristics


Product Details


Geberit shower channel, floor

Application

• For use within buildings• For the drainage of a wet room installation• For use with composite seals• For installing in the room centre

Characteristics

• Minimal construction height 112 mm• Drainpipe and grating frame made of stainless steel• Height-adjustable• Insulation of material noise• Stress elimination to prevent cracking of ceramic plates• Vernier adjustment of grating in height, inclination and off-set possible

via compensating ring• Outlet bend ø 50 mm

Product Details

Additional Note2 odour traps, incl. dip tube; Outlet bend; Drainpipe with the installation flange for thin mortar installation; Frame of grating; Rubber collar; 4 feet, incl. acoustic insulation elements; Protection housing; Adhesive; Fastening material; Excludes ready to fit set



Article no. PU1

154.303.00.1 1


Article no. PU1

154.304.00.1 1


Article no. PU1

154.305.00.1 1


Article no. PU1

154.306.00.1 1



Article no. lcm

l1cm

l2cm

l3cm

PU1 PU4

154.100.00.1 70 33 13,7 80 1 20

154.101.00.1 80 38 18,7 90 1 20

154.102.00.1 90 43 23,7 100 1 20

154.103.00.1 100 48 28,7 110 1 20

154.130.00.1 110 53 33,7 120 1

154.131.00.1 120 58 38,7 130 1

1514

6

l

l3

l2l1

50

19314

10-15

12-26

112-17652


Product GuideTraps

Geberit shower channel, wall

Application

• For use within buildings• For the drainage of a wet room installation• For use with composite seals• For wall mounting

Characteristics

• Minimal construction height 112 mm• Drainpipe and grating frame made of stainless steel• Height-adjustable• Insulation of material noise• Stress elimination to prevent cracking of ceramic plates• Vernier adjustment of grating in height, inclination and off-set possible

via compensating ring• Outlet bend ø 50 mm

Product Details

Additional Note2 odour traps, incl. dip tube; Outlet bend; Drainpipe with the installation flange for thin mortar installation; Frame of grating; Rubber collar; 4 feet, incl. acoustic insulation elements; Margin insulation tape for decoupling solid-borne sound; Protection housing; Adhesive; Fastening material; Excludes ready to fit set


Ready-to-fit set for Geberit shower channel, creative set

Application

• For use with bespoke Uniflex shower channel ready-to-fit set

Characteristics

• Production and care instructions for the manufacture of individual design covers

Additional NoteExtraction tool; 10 damping caps (8.5 mm); 10 damping caps (14.5 mm)


Ready-to-fit set for Geberit shower channel, brushed stainless steel

Application

• For use with Uniflex shower channel

Characteristics

• Brushed stainless steel

Additional NoteDesign cover; 7 damping caps; Extraction tool


Ready-to-fit set for Geberit shower channel, for customisation

Application

• For use with Uniflex shower channel

Characteristics

• Lid can be covered with ceramic plates• Requires 154.299.00.1

Additional NoteDesign cover; Extraction tool




Article no. lcm

l1cm

l2cm

l3cm

PU1 PU4

154.105.00.1 70 33 13,7 80 1 20

154.106.00.1 80 38 18,7 90 1 20

154.107.00.1 90 43 23,7 100 1 20

154.108.00.1 100 48 28,7 110 1 20

154.135.00.1 110 53 33,7 120 1

154.136.00.1 120 58 38,7 130 1

Article no. PU1

154.299.00.1 1

135

193

6

3

14

6l

l3

l214l1

50

10-15

12-26

52112-176

Article no. Lcm

PU1 PU4

154.350.00.1 70 1 40

154.351.00.1 80 1 40

154.352.00.1 90 1 26

154.353.00.1 100 1 26

154.354.00.1 110 1

154.355.00.1 120 1

Article no. Lcm

PU1 PU4

154.360.00.1 70 1

154.361.00.1 80 1

154.362.00.1 90 1

154.363.00.1 100 1

154.356.00.1 110 1

154.357.00.1 120 1 20

5

L

Product GuideFill and flush valves for ceramic cisterns


Fill and flush valves for ceramic cisterns

Geberit filling valve type 380 for exposed cistern

Application

• For filling cisterns• For use with grey water (rainwater), providing a filter system is used• For use with sea water (brass parts must be dezincification-resistant)• For use with clean drinking water• Can be installed in an exposed cistern• Not suitable for use with water with an elevated chlorine content

(swimming pools, etc.)• Not suitable for use with cleaning agents, disinfectants and colouring

agents put into the cistern (contact Geberit if in doubt)

Characteristics

• The filling height can be set by turning the spindle• The valve opens after the water level drops by 20 mm

Product Details

Additional NoteAdaptor; Cone screw fitting; Spacer


Geberit filling valve type 360 for ceramic cistern, water supply connection at the bottom, 1/2"

Application

• For water supply connection at the bottom• For water supply connection 1/2"

Characteristics

• Height-adjustable

Product Details

Additional NoteSeal; Nut


Geberit filling valve type 260 for ceramic cistern, half moon button

Application

• For installation in ceramic cisterns

Characteristics

• Overflow pipe height-adjustable• Adjustable flush volume depending on amount of water in cistern• Dual flush actuator with threaded rod for fastening the cistern cover

Product Details

Additional NoteDual flush unit; Lid attachment; Dual flush actuator; Fastening material; Seals

Excluded: Fill valve




Flow rate at 0.5 bar 0.07 l/s

Flow rate at 3 bar 0.19 l/s

Line noise at 3 bar 12 dB(A)


Pressure shock increase at 6 bar +1 bar

Max. temperature during storage 40 °C



240.700.00.1 1 10 200

212

3

243

112

61



Flow rate at 3 bar 0.16 l/s



281.206.00.1 1 25 600

Actuation force 18 N



Flush volume large range 6 / 9 l



261.157.00.1 1 36 288

WLWL

CL

CL

WL

235 - 385

146 - 296

25

92

G

41.5 9 - 15

96

71

185-28

38-45

325-41

min. 9 mmmax. 35 mm

8

125


Product GuideFill and flush valves for ceramic cisterns

Geberit flush valve type 280 for ceramic cistern, with blue square dual flush

Application

• For installation in ceramic cisterns

Characteristics

• Overflow pipe height-adjustable• Adjustable flush volume depending on amount of water in cistern• Dual flush actuator with threaded rod for fastening the cistern cover

Product Details

Additional NoteDual flush unit; Dual flush actuator with rosette; Fastening material; Rosette ø 50 mm


Flush volume large range 6 / 9 l


Actuation force 18 N





282.350.KD.1 gloss chrome / blue 1 18 108

312-45 293-431

min. 08

max. 15

38-45 12-45

17-27

min. 09

max. 2

16

8

Product GuideGeberit AquaClean


Geberit AquaClean

Geberit AquaClean 8000plus, complete solution

Application

• For gentle cleaning with water• For mains fed water connection• Complete solution for concealed cistern

Characteristics

• Warm water wash with adjustable temperature• Warm air dryer with adjustable temperature• Washdown WC with surface-coated ceramic appliance• WC seat with soft closing lid• Infra-red user detection• Odour extraction• Shower arm can be set to 7 positions• Oscillating spray (automatic forward and reverse motion of the spray

arm)• Pulsating spray• Adjustable spray intensity• Automatic pre-rinsing of spray nozzle with fresh water and post-

rinsing with Geberit nozzle cleaner• Integrated storage water heater tank with ON/OFF and economy

setting• 4 programmable user profiles• Water supply connection on the left side• Functions and settings adjustable via remote control• Mains fed water connection required (minimum 1 bar)• Mains electric, with 5 amp fuse spur

Product Details

Additional NoteIncludes: Remote control with LC display, wall-mounted holder and batteries, LR03 (AAA); Cover plate for remote control compartment; Active carbon filter; Geberit nozzle cleaner; Water supply connection set for UP300 / UP320 concealed cistern / Monolith; Dryer fan with housing; Acoustic insulation set; Fastening material; Spray shield


For installation with Geberit Kappa concealed cistern 15 cm (UP200), oder:• Article no. 241.819.00.1For installation with Geberit Sigma concealed cistern 8 cm (UP720), oder:• Article no. 242.413.00.1For installation with concealed cistern for low height furniture oder:• Article no. 242.355.00.1

Note

The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.

Geberit AquaClean

42

18−2043

21−255−9

38−42

25

135

615

215

290

Mains water pressure 1–10 bar




Power consumption standby / with heating switched on 1 / 9 W


Protection class I

Fuse spur 5 amp

Length of mains connection cable 70 cm

Air volume flow rate odour extraction unit 10 m3/h

Air volume flow rate dryer 12 m3/h

Flow rate, anal shower 2.1–5.5 l/min

Flow rate, Lady shower 1.4–3 l/min

Dryer temperature factory setting 45 °C

Dryer temperature range 20–45 °C

Water temperature factory setting 37 °C

Water temperature range 10–39 °C

Storage temperature -10 – +60 °C


Spray time factory setting 20 s

Number of shower pressure settings, shower spray 7

Flow pressure range 1–10 bar

Storage water heater capacity 2.0 l

Net weight 32 kg

Gross weight 37 kg

Maximum load WC seat / WC lid 150 kg


180.101.11.1 white alpine 1 4



Geberit AquaClean 8000, complete solution

Application

• For gentle cleaning with water• For mains fed water connection• Complete solution for concealed cistern

Characteristics

• Warm water wash with adjustable temperature• Washdown WC with surface-coated ceramic appliance• Infra-red user detection• WC seat with soft closing lid• Integrated storage water heater tank with ON/OFF and economy

setting• Oscillating spray (automatic forward and reverse motion of the spray

arm)• Adjustable spray intensity• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Water supply connection on the left side• Mains fed water connection required (minimum 1 bar)• Mains electric, with 5 amp fuse spur

Product Details

Additional NoteWater supply connection set for UP300 / UP320 concealed cistern / Monolith; Acoustic insulation set; Fastening material; Spray shield


For installation with Geberit Kappa concealed cistern 15 cm (UP200), oder:• Article no. 241.819.00.1For installation with Geberit Sigma concealed cistern 8 cm (UP720), oder:• Article no. 242.413.00.1For installation with concealed cistern for low height furniture oder:• Article no. 242.355.00.1

Note






Power consumption standby / with heating switched on 1 / 9 W


Protection class I

Fuse spur 5 amp

Length of mains connection cable 70 cm









Net weight 27.5 kg

Gross weight 34 kg


42

18−2043

21−255−9

38−42

25

135

615

215

290


146.181.11.1 white alpine 1 4



Geberit AquaClean 5000plus, enhancement solution

Application

• For gentle cleaning with water• For subsequent mounting on a WC ceramic (replaces WC seat and

lid)• For mains fed water connection

Characteristics

• Warm water wash• WC seat with soft closing lid• Infra-red user detection• Odour extraction• Shower arm can be set to 7 positions• Oscillating spray (automatic forward and reverse motion of the spray

arm)• Pulsating spray• Adjustable spray intensity• Integrated storage water heater tank with ON/OFF and economy

setting• Warm air dryer with adjustable temperature• Mains connection cable can be cut to length• Mains power connection at rear with hidden pipe-laying option to the

left or right• Functions and settings adjustable via remote control• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Water supply connection on the left side• Mains fed water connection required (minimum 1 bar)• Mains electric, with 5 amp fuse spur

Product Details

Additional NoteWater supply connection set for UP300 / UP320 concealed cistern / Monolith; Includes: Remote control with LC display, wall-mounted holder and batteries, LR03 (AAA); Active carbon filter; Water supply connection set for left side connection; Spray nozzle (replacement); Fastening material; Compensation pad for toilet seat; Spray shield


For installation with Geberit Kappa concealed cistern 15 cm (UP200), order:• Article no. 240.634.00.1 for H82• Article no. 240.635.00.1 for H98For installation with the Geberit Sigma concealed cistern 12 cm (UP320) and Monolith sanitary module for Geberit AquaClean, order:• Article no. 249.801.00.1For installation with the Geberit Sigma concealed cistern 8 cm (UP720), order:• Article no. 242.413.00.1 and 249.801.00.1For installation with the concealed cistern for low height furniture order:• Article no. 242.553.00.1

Note


185

485

35

3030 22

55

155

35

15

R3/825

11

29

13-165

507

295

195

385

225

54-8





Power consumption standby / with heating switched on 0.9 / 6.7 W


Protection class I

Fuse spur 5 amp

Length of mains connection cable 2 m


Air volume flow rate dryer 9.1 m3/h

Flow rate, anal shower 1.7–3 l/min

Flow rate, Lady shower 0.6–2 l/min

Dryer temperature factory setting 45 °C

Dryer temperature range 20–45 °C


Water temperature range 10–39 °C







Net weight 6.3 kg

Gross weight 9.2 kg






Geberit AquaClean 5000, enhancement solution

Application



Characteristics

• Warm water wash with adjustable temperature• WC seat with soft closing lid• Infra-red user detection• Odour extraction• Spray arm with nozzle for anal area, can be extended• Oscillating spray (automatic forward and reverse motion of the spray

arm)• Adjustable spray intensity• Integrated storage water heater tank with ON/OFF setting• Mains power connection at rear with hidden pipe-laying option to the

left or right• Mains connection cable can be cut to length• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Water supply connection on the left side• Mains fed water connection required (minimum 1 bar)• Mains electric, with 5 amp fuse spur

Product Details

Additional NoteWater supply connection set for UP300 / UP320 concealed cistern / Monolith; Includes: Active carbon filter; Water supply connection set for left side connection; Spray nozzle (replacement); Fastening material; Compensation pad for toilet seat; Spray shield



Note








Protection class I

Fuse spur 5 amp



Flow rate, anal shower 1.7–3 l/min








Net weight 6.1 kg

185

485

35

3030

22

55

155

35

15

R3/825

11

29

13-165

507

295

195

385

225

54-8

Gross weight 9 kg






Geberit AquaClean 4000, enhancement solution

Application



Characteristics

• Warm water wash• WC seat with soft closing lid• Spray intensity can be set to 5 different levels• Mains power connection at rear with hidden pipe-laying option to the

left or right• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Integrated storage water heater tank with ON/OFF setting• Water supply connection on the left side• Mains fed water connection required (minimum 1 bar)• Mains electric, with 5 amp fuse spur

Product Details



Note








Protection class I

Fuse spur 5 amp










Net weight 4.1 kg

Gross weight 7.5 kg


40

15

R1/2 155

3030

17

3

55

4

55

145

15

13-165

10

2855-9

225

5

505

14

26





Geberit AquaClean design cover for complete solution, for 8000plus and 8000, laminate

Application

• For retrofitting Geberit AquaClean complete solutions to a Geberit concealed cistern, without conduit pipe

• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For use on fully tiled surface

Characteristics

• Suitable for distance of 65-70 cm, measured from the middle of the actuator plate to the middle of the ceramic fastening

• Retrofit set can be mounted and removed without damaging the tile surface

• Design Panel with integrated actuation for dual flush• Surface even actuation• Hidden water supply connection• Cable for power connection can be housed in Design Panel• High pressure laminate

Additional NoteDesign Panel; Reinforced braided hose; Y-branch; 4 actuator rods; T-piece; Fastening material


Geberit AquaClean design cover for enhancement solution, for 8000plus and 8000, glass

Application



Characteristics

• Suitable for distance of 65-70 cm, measured from the middle of the actuator plate to the middle of the ceramic fastening


• Design Panel with integrated actuation for dual flush• Surface even actuation• Hidden water supply connection• Cable for power connection can be housed in Design Panel



Note



115.323.11.1 white 1

107

10

162

475

65-70

48

58

106

95

18

15


115.325.SG.1 black 1 10

115.325.SF.1 white 1 10

107

10

162

475

65–70

48

58

106

95

18

2



Geberit AquaClean design cover for enhancement solution, for 5000plus, 5000 and 4000, laminate

Application



Characteristics


• Design Panel with integrated actuation for dual flush• Surface even actuation• Water supply connection hidden in design panel• High pressure laminate



Geberit AquaClean design cover for enhancement solution, for 5000plus, 5000 and 4000, glass

Application



Characteristics


• Design Panel with integrated actuation for dual flush• Surface even actuation• Water supply connection hidden in design panel



Reinforced braided hose for Geberit Kappa concealed cistern 15 cm (UP200), for Geberit AquaClean 8000plus and 8000

Application

• For Geberit Kappa concealed cistern 15 cm (UP200) with top/front actuation

• For connecting Geberit AquaClean

Characteristics

• Special production to meet the standard BS 6920


Geberit water supply connection for Geberit Sigma concealed cistern 8 cm (UP720), for Geberit AquaClean

Application

• For use with Geberit Sigma concealed cistern 8 cm (UP720), front actuation

• For connecting Geberit AquaClean• Also requires 249.801.00.1


Geberit AquaClean 5000 & 5000plus water supply connection set, standard

Application

• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus


Note



115.322.11.1 white 1


115.324.SG.1 black 1 10

115.324.SF.1 white 1 10

107

162

38

59

95

495

15

107

162

38

59

95

495

2

Geberit AquaClean connection sets

Article no. PU1

241.819.00.1 1

Article no. PU1

242.413.00.1 1

Article no. PU1 PU2

242.185.00.1 1 5



Geberit water supply connection for Geberit Sigma concealed cistern 12 cm (UP320), for Geberit AquaClean enhancement solution

Application

• For connecting Geberit AquaClean enhancement solutions to concealed cistern

• For concealed cisterns with pre-mounted conduit pipe for the water supply connection

• For connection to Geberit Kappa concealed cistern 15 cm (UP200); use separate water supply connection set

• Additional part 242.413.00.1 required for use with Geberit Sigma concealed cistern 8 cm (UP720)

Additional NoteAngle stop valve R 1/2"; 2 metal-reinforced hoses R 3/8"; Y-branch; Connection material


Water supply connection set for Geberit AquaClean enhancement solution to Geberit Kappa concealed cistern 15 cm (UP200), H82

Application



• For use with installation elements with construction height 82 cm

Additional Note3 metal-reinforced hoses; Angle stop valve R 1/2"; Connection material


Water supply connection set for Geberit AquaClean enhancement solution to Geberit Kappa concealed cistern 15 cm (UP200), H98

Application



• For installation elements with construction height 98 cm

Additional Note3 metal-reinforced hoses; Angle stop valve R 1/2"; Connection material


Geberit water supply connection set, conventional

Application

• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000• For conventional water supply connection• For low height furniture

Additional NoteReinforced braided hose R 1/2" x 3/8"; Angle stop valve R 1/2"; Connection material


Note


Article no. PU1

249.801.00.1 1

Article no. PU1

240.634.00.1 1

Article no. PU1

240.635.00.1 1

Article no. PU1 PU2

242.355.00.1 1 10



Geberit AquaClean 8000plus nozzle cleaner

Application

• For use with Geberit AquaClean 8000plus

Characteristics

• For approx. 750 uses (400 ml)• Dermatologically tested


Geberit AquaClean 8000plus active carbon filter and nozzle cleaner 1 pcs

Application



Geberit AquaClean 8000plus active carbon filter and nozzle cleaner 2 pcs

Application



Geberit AquaClean 8000plus active carbon filter

Application



Geberit AquaClean cleaning agent

Application

• For cleaning Geberit AquaClean devices

Characteristics

• Content 500 ml• Can be used immediately and undiluted• Environmentally friendly


Geberit AquaClean cleaning agent with cloth

Application

• For cleaning Geberit AquaClean devices

Additional NoteGeberit AquaClean cleaning agent; Cleaning cloth


Set of Geberit AquaClean 5000plus active carbon filters

Application


Additional Note2 piece


Note


Geberit AquaClean consumables

Article no. PU1 PU2

242.545.00.1 1 12

Article no. PU1 PU4

240.625.00.1 1 144

Article no. PU1 PU4

240.626.00.1 1 144

Article no. PU1 PU2

250.022.00.1 1 10

Article no. PU1 PU2

242.546.00.1 1 10

Article no. PU1 PU2

242.547.00.1 1 10

Article no. PU1 PU2

240.116.00.1 1 30



Geberit AquaClean 8000plus set shower and dryer nozzle

Application



Geberit AquaClean 8000plus remote control wall holder

Application



Geberit AquaClean 5000plus and 8000plus battery set for remote control

Application

• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 5000plus

Additional NoteSet of 3


Geberit AquaClean 8000plus remote control

Application


Product Details


Geberit AquaClean 8000 shower nozzle

Application

• For use with Geberit AquaClean 8000


Geberit AquaClean 8000plus & 8000 seat and lid

Application

• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000


Note


Geberit AquaClean spare parts

Article no. PU1 PU2

242.394.00.1 1 10

Article no. PU1

250.032.00.1 1

Article no. PU1

147.008.00.1 1

Radio frequency 2.4 GHz

Article no. PU1

250.043.00.1 1

Article no. PU1

250.071.00.1 1


250.034.11.1 white alpine 1 5



Geberit AquaClean 8000plus & 8000 lid

Application



Geberit AquaClean 8000plus & 8000 seat

Application



Geberit AquaClean 8000plus & 8000 casing

Application



Geberit AquaClean 8000plus & 8000 for WC seat, white, left

Application



Geberit AquaClean 8000plus & 8000 for WC seat, white, right

Application



Geberit AquaClean 8000plus & 8000 cover - right

Application



Geberit AquaClean 8000plus & 8000 O-ring for shower arm

Application



Note







250.029.11.1 white alpine 1 6

Article no. PU1 PU2

250.069.00.1 1 10

Article no. PU1

250.068.00.1 1

Article no. PU1

250.026.00.1 1

Article no. PU1

240.665.00.1 1



Geberit AquaClean 8000plus & 8000 screw for casing

Application



Geberit AquaClean 8000plus & 8000anti-slip strip set

Application



Geberit AquaClean 8000plus & 8000 maintenance flap

Application



Geberit AquaClean 8000plus & 8000 acoustic insulation set

Application


Additional NoteSound insulation mat; 2 sleeves


Geberit AquaClean 5000plus remote control

Application



Geberit AquaClean 5000plus dryer flap

Application



Note


Article no. PU1

250.079.11.1 1

Article no. PU1

250.037.11.1 1


250.030.11.1 White alpine 1

Article no. PU1

250.027.00.1 1

Article no. PU1

242.169.11.1 1

Article no. PU1 PU2

242.184.11.1 1 20



Geberit AquaClean 5000plus wall mounted holder for remote control

Application



Geberit AquaClean 5000 & 5000plus WC seat lid

Application



Geberit AquaClean 5000 & 5000plus WC seat

Application



Geberit AquaClean 5000 & 5000plus filter

Application



Geberit AquaClean 5000 & 5000plus adaptor plate

Application• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plusCharacteristics• Dowel with clamping range 12.5-21.5 cm and 26.5-27.5 cm• For ceramics with top fixing or outside range 13-16.5 cmAdditional NoteConnection material; Allen key; 4 dowelsOrdering Information

Geberit AquaClean 5000 & 5000plus spray nozzle

Application• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plusOrdering Information

Geberit AquaClean 5000 & 5000plus cover filter compartment

Application



Geberit AquaClean 5000 & 5000plus cover for electrical connection

Application• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plusOrdering Information

Note


Article no. PU1

240.057.11.1 1

Article no. PU1

242.181.11.1 1


242.179.11.1white alpine, standard finish

1

242.180.11.1 white alpine, coated finish 1

Article no. PU1 PU2

242.187.00.1 1 10

Article no. PU1

240.495.00.1 1

Article no. PU1

240.226.11.1 1

Article no. PU1 PU2

242.182.11.1 1 12

Article no. PU1 PU2

242.183.11.1 1 15



Geberit AquaClean 5000 & 5000plus hinge set

Application



Geberit AquaClean 5000 & 5000plus compensation pad set raised

Application




Geberit AquaClean 5000 & 5000plus compensation pad set

Application




Geberit AquaClean 5000 & 5000plus pad set for WC lid

Application



Geberit AquaClean 4000 WC seat

Application

• For use with Geberit AquaClean 4000Ordering Information

Geberit AquaClean 4000 WC seat lid

Application


Geberit AquaClean 4000 filter

Application


Geberit AquaClean 4000 securing clip to WC lid

Application


Geberit AquaClean 4000 pad set for WC lid

Application


Note


Article no. PU1

242.186.11.1 1

Article no. PU1

241.517.CG.1 1

Article no. PU1

241.516.CG.1 1

Article no. PU1 PU2

242.286.CG.1 1 50


242.170.11.1 white alpine, standard finish 1

242.171.11.1 white alpine, coated finish 1


242.172.11.1 white alpine 1 7

Article no. PU1

147.235.00.1 1



Article no. PU1

147.231.00.1 1



Geberit AquaClean 4000 pin set for WC seat/lid

Application



Geberit AquaClean 4000 O-ring set for spray arm

Application



Geberit AquaClean 4000 compensation pad set raised

Application



Geberit AquaClean 4000 compensation pad set

Application



Geberit AquaClean 4000 spray nozzle with 3 holes

Application



Geberit AquaClean 4000 spray nozzle with 5 holes

Application



Geberit AquaClean 4000, 5000 & 5000plus fastening set


Geberit AquaClean waterstream cover for Geberit AquaClean 4000

Application



Spray shield for Geberit AquaClean 8000plus, 8000, 5000plus and 5000

Application

• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus• For use with Geberit AquaClean 8000• For use with Geberit AquaClean 8000plus


Note


Article no. PU1

242.175.00.1 1

Article no. PU1

242.176.00.1 1

Article no. PU1

242.174.00.1 1

Article no. PU1

242.173.00.1 1

Article no. PU1 PU2

242.377.00.1 1 100

Article no. PU1 PU2

242.376.00.1 1 100

Article no. PU1

849.825.00.1 1


813.224.15.0 Glass clearly 1

Article no. PU1 Price£

242.676.00.1 1 7.85


SparesSpares Duofix WC frames

Buy spares direct on 01789 842127

SparesDuofix WC frames

111.383.00.5 Geberit Duofix frame for wall-hung WC, H112, with Sigma cistern 12 cm (UP320)111.384.00.5 Geberit Duofix frame for wall-hung WC, H112, with Sigma cistern 12 cm (UP320), without fixings and drainage


Duofix WC frames

Pos. Article no. Description

1 241.869.00.1 Mounting accessories

2 241.824.00.1 Inner cover

3 241.826.00.1 Protection housing

4 362.771.00.1 Seal for flush pipe

5 362.796.92.1 Protection cover for flush pipe

6 240.189.00.1 Threaded rod (pr) M12, 25 cm length

7 152.426.46.1 WC Connection Set

7.1 217.713.46.1 chrome caps and washers

7.2 119.668.00.1 flush pipe seal

7.3 152.424.00.1 rubber collar

8 366.061.16.1 90 mm HDPE 90 Degree bend

8.1 387.282.00.1 Collar for outlet bend

9 366.820.92.1 Protection cover

10 367.928.16.1 90/110 mm Adaptor

11 242.012.00.1 Complete pipe bracket

11.1 242.017.00.1 Pipe bracket clip

12 242.010.00.1 Conduit pipe for shower toilet water supply

13 111.892.00.1 Hexagonal self tapping screws

14 240.269.00.1Water supply connection R 1/2" with integrated angle stop valve

14.1 240.298.00.1 Spindle for isolation valve

14.2 240.347.00.1 Hand wheel

14.3 241.857.00.1 Nut for isolation valve

15 241.982.00.1 Stainless steel connection hose

15.1 240.922.00.1 EPDM O Ring 7.5 x 1.5 mm / 19 x 2 mm

16 240.923.00.1 Connection clip for fill valve

17 240.705.00.1 Side fill valve for Duofix

17.1 240.771.00.1 Diaphragm for side fill valve

18 241.858.00.1 Complete flush valve with basket

19 240.622.00.1 Complete flush valve

19.1 241.167.00.1 Clip set for flush valves

19.2 816.418.00.1 Flush valve seal

20 241.859.00.1 Basket for flush valve

20.1 241.868.00.1 Seal for basket

21 241.829.00.1 Cradle assembly for push rods

816.418

10

4

2

1

3

5

98.1

12

11.1

14.3

14.114.2

7.2

15

15.1

2113

1617

17.1

19.2

18

19

19.1

20

20.113

14

11

87.1

7

7.3

6

SparesDuofix WC frames Spares



111.242.00.1 Geberit Duofix frame for wall-hung WC, H82, with Kappa cistern 15 cm (UP200) 111.292.00.1 Geberit Duofix frame for wall-hung WC, H98, with Kappa cistern 15 cm (UP200)



1 240.206.00.1 Inner cover



4 240.269.00.1 Servicing (stop) valve complete

4.1 240.347.00.1 Knob for isolation valve



5 240.705.00.1 Side fill valve



6.1 240.922.00.1 EPDM O Ring 7.5 x 1.5mm / 19 x 2mm


8 240.638.00.1 Flush valve



9.1 240.282.00.1 Seal for basket



12 240.189.00.1 Threaded rod (pr)

13 240.972.00.1 Complete pipe bracket

13.1 240.417.00.1 Pipe bracket clip

14 152.426.46.1 WC connection set

14.1 217.713.46.1 Chrome caps & washers

14.2 119.668.00.1 Flush pipe seal

14.3 152.424.00.1 Rubber collar

15 366.061.16.1 90 mm HDPE 90 degree bend

15.1 387.282.00.1 90 mm seal

16 366.820.92.1 Protection cover

17 367.928.16.1 90/110 mm Adaptor


55.1

4

4.34.1 4.2

1

2

3

11

12

12

17

9

8

7

8.1

9.1

15

16

15.1

18

18

13

13.1

10

6

6.1

14

14.3

14.2

14.1


SparesSpares Concealed cisterns


Concealed cisterns

109.309.00.5 Geberit Sigma concealed cistern 12 cm, (UP320)


Concealed cisterns


1 240.923.00.1 Connection clip for fill valve

2 240.705.00.1 Side fill valve for Duofix


3 241.858.00.1 Complete flush valve with basket


4.1 241.167.00.1 Clip set for flush valves





7 241.824.00.1 Inner cover


9 241.378.00.1 Concealed flush pipe fixing set

10 119.652.16.1 Concealed flush pipe

10.1 362.771.00.1 Seal for flush pipe ø 45 mm

10.2 362.796.92.1 Protection cover for flush pipe

11 892.975.00.1 O Ring seal

12 889.711.00.1 Fixing slider

13 465.027.00.1 Wall brackets and screws (pair)


15 240.269.00.1Water supply connection R 1/2“ with integrated angle stop valve

15.1 240.347.00.1 Hand wheel



816.418

11

10.210.1

15

15.115.2

15.3

1 2

8

10

7

2.1

4.2

3

4

4.1

5

5.1

14

6

9

13

12

13

SparesConcealed cisterns Spares



109.200.00.1 Geberit Kappa concealed cistern 15 cm (UP200)


123.137.11.1 Geberit exposed cistern type 123, low-mounted, 9 l, water supply connection left/right, with pneumatic lifter



1 240.206.00.1 Inner cover



4 240.269.00.1 Servicing (stop) valve complete

4.1 240.347.00.1 Knob for isolation valve






6.1 240.922.00.1 EPDM O Ring 7.5 x 1.5mm / 19 x 2mm


8 240.638.00.1 Flush valve

8.1 241.167.00.1 Clip set for flush valve






12 241.378.00.1 Concealed flush pipe fixing set

13 152.434.06.1 WC flush pipe connector and collar

13.1 119.668.00.1 Flush pipe seal


1 890.240.11.1 Cover



3 240.573.00.1 Pneumatic actuation unit single flush

4 240.576.00.1 Flush valve


5 256.000.00.1 Air hose 3.5m

6 118.006.11.1 Flush bend

7 119.668.00.1 Flush seal for pan

Not Illustrated

294.802.00.1 Wall brackets

240.139.00.1 Seal kit


SparesSpares WC flush plates


109.720.00.1 Geberit concealed cistern for low height furniture, pneumatic, dual flush


WC flush plates

115.770.XX.5 Geberit flush plate Sigma01 for dual flush115.778.XX.1 Geberit flush plate Sigma20 for dual flush115.788.XX.1 Geberit flush plate Sigma50 for dual flush


115.758.XX.1 Geberit flush plate Sigma10 for single flush



1 281.206.00.1 Bottom fill valve

1.1 241.813.00.1 Seal set for bottom fill valve

2 241.415.00.1 Flush valve


3 240.574.00.1 Pneumatic actuation unit*

4 241.414.00.1 Cover plate/lid

5 241.413.21.1 Dual flush button*

6 240.575.00.1 Double air hose*

7 119.705.93.1 Flush bend

8 119.668.00.1 Flush seal for pan

*Dual flush only.

For single flush:

240.573.00.1 Pneumatic actuation unit

256.000.00.1 Air hose 3.5m

Not Illustrated

240.139.00.1 Seal kit

WC flush plates


1 241.876.00.1 Flush plate fixing frame for tool-free installation

2 241.874.00.1Push rods and distance rods for tool-free installation

3 240.938.00.1 Extension set

4 241.295.00.1 Spring

Note: Samba, Bolero, Twist compatible after 1st April 2008


1 241.876.00.1 Flush plate fixing frame

2 241.874.00.1Push rods and distance rods for tool-free installation

3 240.938.00.1 Extension set

Note: Rumba, Mambo and Tango compatible after 1st April 2008

2

2

2

2

1

3

4 4 4 4

2

2 1

2

3

SparesWC flush plates Spares



115.770.XX.1 Geberit flush plate Samba for dual flush115.777.XX.1 Geberit actuator plate Bolero for dual flush115.780.XX.1 Geberit flush plate Twist for dual flush


115.750.XX.1 Geberit flush plate Rumba for stop-and-go flush115.751.XX.1 Geberit flush plate Mambo for stop-and-go flush115.760.XX.1 Geberit flush plate Tango for stop-and-go flush



1 813.514.00.1 Spring


2.1 240.934.00.1 Push rod locking piece

3 240.936.00.1 Push rods (pair)

4 240.173.00.1 Distance rods (pair)

5 240.930.00.1 Inner cover

Note: For post May 2008 installation please use Sigma spares list


1 813.514.00.1 Spring


2.1 240.933.00.1 Push rod locking piece

3 240.936.00.1 Push rods (pair)

4 240.173.00.1 Distance rods (pair)

5 240.930.00.1 Inner cover

Note: For post May 2008 installation please use Sigma spares list


SparesSpares


115.228.XX.1 Geberit flush plate Kappa20 for dual flush115.240.XX.1 Geberit flush plate Kappa21 for dual flush115.260.XX.1 Geberit flush plate Kappa50 for dual flush 115.666.XX.1 Geberit flush plate Artline for dual flush


111.623.00.1 Geberit Duofix frame for urinal, H130, for tank fed water supply111.622.00.1 Geberit Duofix frame for urinal, H130, flush pipe with pipe interrupter for mains fed water supply



1 241.295.00.1 Spring

2 240.639.00.1 Push rods and distance rods (pair)


4 240.206.00.1 Inner cover

5 240.938.00.1 Extension set (order separately)



1 242.195.00.1 Hose R8 for inlet UR-element

2 242.039.00.1 Crossbar for water supply 32 mm

3 152.489.16.1 Inlet connector & collar

4 242.045.00.1 Fixation rods complete

4.1 242.046.00.1 Plastic nut for urinal fastening

5 240.027.46.1 Chrome caps & washers

6 242.210.00.1 Cross bar metal for urinal element for outlet

7 152.950.11.1 Urinal trap

7 152.983.00.1 Urinal trap

8 240.306.00.1 Protection plug

9 240.315.00.1 Urinal outlet bend complete

9.1 152.693.00.1 Rubber collar reducer 63x50

10 242.516.00.1 Geberit straight connector, PVC d50


12see 116.001.00.1 Urinal installation set universal

4

2

2

32

11

5

9

12

10

9.1

6

2

5

4.1 4

8

3

11

11 1

7

SparesFill and flush valves for ceramic cisterns Spares



116.001.00.1 Installation set for Geberit urinal flush control, electronic, plastic nipple116.003.00.1 Installation set for Geberit urinal flush control, electronic, with flush pipe



240.705.00.1 Geberit filling valve type 380 for concealed cistern


281.206.00.1 Geberit filling valve type 360 for ceramic cistern, water supply connection at the bottom, 1/2"



1 242.130.00.1 Connection nipple urinal straight

2 242.131.00.1 Connection nipple urinal bent

3 241.934.00.1 Stop valve with throttle, complete

3.1 241.933.00.1 Regulating screw

4 241.930.00.1 Protection cover with protection cover lid

5 241.947.00.1 Insulation protection with connection terminal

6 242.156.00.1 Lip seal flushing pipe



1 240.771.00.1 Diaphragm assembly

2 261.358.00.1 Stainless steel connection hose 3/8"


1 241.813.00.1 Seal set

4

12

5

6

3.1

3


SparesSpares Fill and flush valves for ceramic cisterns


282.350.KD.1 Geberit flush valve type 280 for ceramic cistern, with blue square dual flush


261.157.00.1 Twico I dual flush valve two half-moon design



1 241.800.KD.1 Flush button

2 241.801.00.1 Basket

2.1 240.278.00.1 Overflow pipe

3 816.418.00.1 Flush valve seal

4 261.630.00.1 Connection set

4.1 241.350.00.1 Connection washer


1 816.418.00.1 Flush valve seal

2 261.200.00.1 Push button and pair of rods

3 240.276.00.1 Cover

4 261.630.00.1 Connection set

4.1 241.350.00.1 Connection washer

Installation GuideOverview Main methods of Duofix installation


Main methods of Duofix installationOverview

For cladding both Dry Wall and Pre Wall installations we recommend the use of 1 x 12.5 mm moisture and fire resistant plasterboard or 2 x 12.5 mm standard plasterboard.

Note: Installation videos can be found at www.geberit.co.uk. Note: Any boarding or furniture panelling must be fixed tight up against the face of the relevant Duofix frame, and screwed directly to the frame where possible

Duofix - Dry Wall Duofix - PreWall

In stud wall PreWall fixing offers the ability to construct a duct in front of anexisting wall to hide plumbing and drainage.

Duofix – PreWall System Duofix – PreWall System – Plasterboard

The addition of system rail offers a more integrated look and simplifies cladding and tiling.

The use of system rail also offers the opportunity to install Duofix in front of plaster stud walls.NB. Plasterboard has to be at least 18 mm thick.

Duofix – Full Height System Duofix in Panels

Full height Duofix telescopic studs enable you to create a load bearing stud wall.

Speak to us about our partnership with panelling system manufacturers when you need access behind the wall to plumbing and services.


Installation GuideMain methods of Duofix installation Duofix in dry wall

Duofix in dry wall

1.

2.

3.

Duofix in dry wall

The 1.12 m high frames have a 1 metre mark on the frame to assist levelling and installation. The 0.98 m and 0.82 m high frames should be measured from the finished floor level to the top of the frames. Height measurements must be set from the finished floor level. The feet are adjustable by 200 mm and can be unscrewed and turned through 90 degrees if required.

It is very important that the frame is fixed so that the front of the frame is level with the front of the studs.

Once levelled and feet have been adjusted and secured the frame can be fixed into the studs with screws provided.

Fixing in wooden studs

1000

00

A

B

A

BB 13

3

1

2

UW 75 UW 50

PH 3

AA

AA

A

ø 10 mm 13 mm

10

30

30

Installation GuideDuofix in PreWall Main methods of Duofix installation


Duofix in PreWall

1.

2.

3.

Duofix in PreWall

Measure and mark wall taking into account finished floor levels. Drill wall and floor fixing holes.

Fit PreWall brackets to frame together with plastic packing piece. Secure and tighten wall and feet fixings.

Make final adjustments to level and depth measurement before fixing plastic locking nut.

375375

460460

0

1081080

0

10 mm10 mm

10 mm10 mm

1

1

2

2

100010001000 A

B

A

BB 13

13

BB

AAAA

BB

AA

BB

131

2

AAAA

AA

13

PH 3

12


Installation GuideMain methods of Duofix installation Duofix PreWall system

Duofix PreWall system

Duofix PreWall system

mm01 ø

25

001.xam

H

005.xam005.xam

m01 øm

25

001.xam

H

0

002-0

H

531.nim 004.xam

RH

.1 ,roolf eht ot liar metsys eht gnitnuoM.gniliec dna sllaw

.2 eht gnitnuoM.liar eht ot semarf

.3 lios eht rof tcud a gnitaerC moor eht gnisu kcats

.sduts thgieh

gnixif draobretsalp roF

002-531

1.00.788.111 .rN .trA

004-002

25

001.xam

H002.xam002.xam

25

001.xam

H

llaw dilos roFgnixif

0-2000

H=1120H=980

H=820

The use of system rail makes for a moreintegrated look and makes cladding and hidingdrainage and supply pipework easy. It alsoallows for Duofix frames to be installed againstplasterboard stud walls (Plasterboard must be at least18 mm thick).

3

C

2 A

B

1

6

3

3

6

2

A

B

1

45

4

4

A

BD

2C

1

B

A

3 4

1

2

1C

D3

A

B

21

32

5

1

A

B

A

B4

1

1

2

2

Installation GuideDuofix system full height Main methods of Duofix installation


Duofix system full height

Duofix system full height

220

0-3

20

02

20

0-3

20

0

metsys htiw rehtegot sduts thgieh moor wen fo esu ehTllaW yrD lanretni gnitroppus fles a dliub ot uoy swolla liar

.llaWerP ro

.3 eruces neht dna emarf tnuoM.duts thgieh moor dnoces

.1 eht ot liar metsys eht tnuoM.gniliec dna llaw ,roolf

.2 eruces dna tnuoM.duts thgieh moor

25

2

A

B

1

1

2

1

4

2

3

3

1

3D

2B

C

C

D2

A

B

1

1

1A

6

2

A

B

1 2

2

3

6

5

3

4

4


Installation GuideMain methods of Duofix installation Corner applications

Corner applications

1.12 m Standard frame with corner brackets

Corner PreWall brackets (111.835.00.1) can be used for all Duofix frames in corner installations, enabling greater use of space.

1.12 m Corner frame universal

For extra space saving and different installation possibilities, this frame is completely adjustable with angle to the wall range of 30-60 degrees.

Corner applications

C

A

B

566-594

049-007

0331 - 099

stekcarb renroC

4X 4X 4X

735035325515905205594784084374664954254544834134424714014304693 A

067057047037027017007096086076066056046036026016006095085075065B

083573073563063553053543043533033523023513013503003592092582082C

B

A

C5353

57252

51

81

51

Installation GuideWC Waste and drainage connection


Waste and drainage connectionWaste and drainage connectionTo enable you to get the maximum benefits when using Duofix installation systems it is important that the right waste and drainage connections are made. At Geberit as well as having over 100 yearsexperience in installation systems, we are also one of the leading European manufacturers of waste and drainage products.The following pages detail the requirements for installation of WC and urinal elements. We have also included reference numbers of our Geberit HDPE ranges to make ordering easier.

Geberit Duofix connectors are specifically designed to secure into the Geberit frame as shown in this picture.

WC

Single WC with connection above floor level

Multi or single WC with connection into float below floor level

Multi WC with connection into float above floor level

WC

33 egap eeS


Installation GuideWaste and drainage connection WC

Exploded view of WC connector fittings

Back to back WC frames (single frames)

Back to back WC frames

Installation GuideUrinal Waste and drainage connection


Urinal

Urinal


Numerical index

Article no. Page

107.35.05B 78

107.35.14B 78

107.35.24B 78

107.35.34B 78

109.200.00.1 11

109.211.00.1 12

109.309.00.5 10

109.720.00.1 13

109.772.00.1 11

111.242.00.1 6

111.292.00.1 6

111.352.00.5 9

111.353.00.5 5

111.383.00.5 3

111.384.00.5 4

111.399.00.5 8

111.493.00.1 40

111.494.00.1 39

111.495.00.1 39

111.543.00.1 56

111.544.00.1 56

111.545.00.1 55

111.622.00.1 57

111.623.00.1 58

111.706.00.1 7

111.729.00.1 7

111.731.00.1 84

111.743.00.1 85

111.790.00.1 9

111.830.00.1 71

111.835.00.1 73

111.843.00.1 72

111.844.00.1 72

111.847.00.1 71

111.859.00.1 60

111.867.00.1 71

111.868.00.1 72

111.869.00.1 72

111.871.00.1 70

111.872.00.1 70

111.873.00.1 70

111.874.00.1 70

111.878.00.1 71

111.887.00.1 73

111.889.00.1 73

111.892.00.173, 106, 107,

112

115.075.21.1 24

115.075.21.Z 24

115.114.11.1 21

115.114.21.1 21

115.200.11.1 60

115.210.CD.1 60

115.210.GT.1 60

115.214.CD.1 60

115.214.GT.1 60

115.228.10.1 19

115.228.11.1 19

115.228.21.1 19

115.228.46.1 19

115.228.CG.1 19

115.228.DK.1 19

115.228.DT.1 19

115.228.DW.1 19

115.228.EP.1 19

115.228.FB.1 19

115.228.FR.1 19

115.228.GM.1 19

115.228.KB.1 19

115.240.KH.1 20

115.240.KJ.1 20

115.240.KK.1 20

115.240.KL.1 20

115.240.KM.1 20

115.240.KN.1 20

115.260.11.1 20

115.260.21.1 20

115.260.46.1 20

115.260.HC.1 20

115.322.11.1 97

115.323.11.1 96

115.324.SF.1 97

115.324.SG.1 97

115.325.SF.1 96

115.325.SG.1 96

115.600.KQ.1 15

115.600.KR.1 15

115.600.SI.1 15

115.600.SJ.1 15

115.600.SQ.1 15

115.612.00.1 18

115.680.11.1 20

115.680.21.1 20

115.723.21.1 43

115.725.21.1 44

115.733.21.1 42

115.738.21.1 43

115.739.21.1 44

115.740.21.1 42

115.750.11.1 19

115.750.21.1 19

115.750.46.1 19

115.750.KB.1 19

115.751.00.1 19

115.758.KH.1 14

115.758.KJ.1 14

115.758.KK.1 14

115.758.KL.1 14

115.758.KM.1 14

115.758.KN.1 14

115.760.11.1 19

115.760.21.1 19

Article no. Page

115.760.45.1 19

115.760.46.1 19

115.760.DT.1 19

115.760.GM.1 19

115.760.HC.1 19

115.760.KA.1 19

115.765.46.1 20

115.770.10.5 13

115.770.11.5 13

115.770.21.5 13

115.770.46.5 13

115.770.CG.5 13

115.770.DK.5 13

115.770.DT.5 13

115.770.DW.5 13

115.770.EP.5 13

115.770.FB.5 13

115.770.FR.5 13

115.770.GM.5 13

115.770.KA.5 13

115.777.10.1 18

115.777.11.1 18

115.777.21.1 18

115.777.46.1 18

115.777.CG.1 18

115.777.DK.1 18

115.777.DT.1 18

115.777.DW.1 18

115.777.EP.1 18

115.777.FB.1 18

115.777.FR.1 18

115.777.GM.1 18

115.777.KB.1 18

115.778.KH.1 14

115.778.KJ.1 14

115.778.KK.1 14

115.778.KL.1 14

115.778.KM.1 14

115.778.KN.1 14

115.778.SN.1 14

115.781.SN.1 14

115.785.00.1 17

115.785.11.1 17

115.785.DW.1 17

115.785.EP.1 17

115.785.GH.1 17

115.785.SC.1 17

115.785.SD.1 17

115.785.SE.1 17

115.788.00.1 16

115.788.11.1 16

115.788.DW.1 16

115.788.EP.1 16

115.788.GH.1 16

115.788.SC.1 16

115.788.SD.1 16

Article no. Page

115.788.SE.1 16

115.792.GH.1 18

115.798.00.1 21

115.831.00.1 74

115.855.00.1 25

115.857.00.1 28

115.857.21.1 28

115.860.00.1 73

115.861.00.1 28

115.890.00.1 26

115.891.00.1 27

115.918.00.1 24

115.939.00.1 25

115.941.11.1 23

115.941.KA.1 23

115.942.11.1 23

115.942.KA.1 23

115.943.21.1 23

115.947.00.1 22

115.947.21.1 22

115.949.21.1 22

115.999.21.1 24

116.001.00.1 59

116.003.00.1 59

116.011.11.5 61

116.011.21.5 61

116.011.46.5 61

116.012.11.1 66

116.012.21.1 66

116.012.46.1 66

116.013.FW.1 67

116.014.11.1 69

116.014.21.1 69

116.014.46.1 69

116.015.KH.1 62

116.015.KJ.1 62

116.015.KK.1 62

116.015.KL.1 62

116.015.KM.1 62

116.015.KN.1 62

116.016.00.1 64

116.016.11.1 64

116.016.DW.1 64

116.016.EP.1 64

116.016.SC.1 64

116.016.SD.1 64

116.016.SE.1 64

116.021.11.5 61

116.021.21.5 61

116.021.46.5 61

116.022.11.1 66

116.022.21.1 66

116.022.46.1 66

116.023.FW.1 68

116.024.11.1 69

116.024.21.1 69

Article no. Page

Numerical index


116.024.46.1 69

116.025.KH.1 63

116.025.KJ.1 63

116.025.KK.1 63

116.025.KL.1 63

116.025.KM.1 63

116.025.KN.1 63

116.026.GH.1 65

116.031.11.5 62

116.031.21.5 62

116.031.46.5 62

116.032.11.1 67

116.032.21.1 67

116.032.46.1 67

116.033.FW.1 68

116.034.11.1 70

116.034.21.1 70

116.034.46.1 70

116.035.KH.1 63

116.035.KJ.1 63

116.035.KK.1 63

116.035.KL.1 63

116.035.KM.1 63

116.035.KN.1 63

116.036.GH.1 65

116.090.SG.1 26

116.090.SM.1 26

116.091.SG.1 27

116.091.SM.1 27

116.107.21.1 51

116.108.21.1 52

116.117.21.1 52

116.118.21.1 53

116.127.21.1 51

116.128.21.1 53

116.135.21.1 45

116.136.21.1 48

116.145.21.1 47

116.146.21.1 50

116.155.21.1 46

116.156.21.1 49

116.235.21.1 45

116.236.21.1 48

116.245.21.1 47

116.246.21.1 50

116.255.21.1 46

116.256.21.1 49

116.335.21.1 40

116.336.21.1 41

116.366.21.1 41

116.450.00.1 54

116.451.00.1 55

116.452.00.1 55

118.006.11.1 109

119.652.16.1 108

Article no. Page

119.668.00.1106, 107, 109,

110

119.705.93.1 110

123.137.11.1 12

131.002.SI.1 29

131.002.SJ.1 29

131.002.SL.1 29

131.002.SQ.1 29

131.021.SI.1 28

131.021.SJ.1 28

131.021.SL.1 28

131.021.SQ.1 28

131.030.SI.1 37

131.030.SJ.1 37

131.030.SQ.1 37

131.031.SI.1 29

131.031.SJ.1 29

131.031.SQ.1 29

131.032.SI.1 36

131.032.SJ.1 36

131.032.SQ.1 36

131.033.SI.1 36

131.033.SJ.1 36

131.033.SQ.1 36

131.040.SI.1 30

131.040.SJ.1 30

131.040.SQ.1 30

131.041.SI.1 30

131.041.SJ.1 30

131.041.SQ.1 30

131.042.SI.1 31

131.042.SJ.1 31

131.042.SQ.1 31

131.043.SI.1 31

131.043.SJ.1 31

131.043.SQ.1 31

131.044.SI.1 32

131.044.SJ.1 32

131.044.SQ.1 32

131.045.SI.1 32

131.045.SJ.1 32

131.045.SQ.1 32

131.046.SI.1 33

131.046.SJ.1 33

131.046.SQ.1 33

131.047.SI.1 33

131.047.SJ.1 33

131.047.SQ.1 33

131.048.SI.1 34

131.048.SJ.1 34

131.048.SQ.1 34

131.049.SI.1 34

131.049.SJ.1 34

131.049.SQ.1 34

131.050.SI.1 35

131.050.SJ.1 35

Article no. Page

131.050.SQ.1 35

131.051.SI.1 35

131.051.SJ.1 35

131.051.SQ.1 35

131.074.00.1 38

131.082.16.1 38

131.083.16.1 38

131.085.11.1 38

131.088.29.1 38

131.099.00.1 37

131.104.00.1 37

131.105.00.1 38

131.108.11.1 38

131.109.21.1 37

131.110.21.1 37

146.114.11.1 93

146.122.11.1 94

146.132.11.1 95

146.181.11.1 92

147.008.00.1 100

147.231.00.1 104

147.235.00.1 104

150.247.00.1 83

150.535.21.1 80

150.536.21.1 81

150.679.21.1 84

150.688.21.1 84

150.712.21.1 81

150.713.21.1 82

150.770.11.1 82

150.770.21.1 82

150.771.11.1 83

150.771.21.1 83

150.772.11.1 83

150.772.21.1 83

151.039.21.1 80

152.170.16.1 79

152.424.00.1 106, 107

152.426.46.1 106, 107

152.434.06.1 109

152.438.46.1 78

152.489.16.1 112

152.693.00.1 112

152.950.11.1 112

152.983.00.1 112

154.005.00.1 86

154.100.00.1 87

154.101.00.1 87

154.102.00.1 87

154.103.00.1 87

154.105.00.1 88

154.106.00.1 88

154.107.00.1 88

154.108.00.1 88

154.130.00.1 87

154.131.00.1 87

Article no. Page

154.135.00.1 88

154.136.00.1 88

154.299.00.1 88

154.300.00.1 86

154.301.00.1 86

154.302.00.1 86

154.303.00.1 87

154.304.00.1 87

154.305.00.1 87

154.306.00.1 87

154.330.00.1 86

154.330.11.1 85

154.330.21.1 85

154.330.FW.1 85

154.350.00.1 88

154.351.00.1 88

154.352.00.1 88

154.353.00.1 88

154.354.00.1 88

154.355.00.1 88

154.356.00.1 88

154.357.00.1 88

154.360.00.1 88

154.361.00.1 88

154.362.00.1 88

154.363.00.1 88

156.050.00.1 10

156.051.00.1 40

180.101.11.1 91

217.713.46.1 106, 107

240.027.46.1 112

240.057.11.1 103

240.116.00.1 99

240.139.00.1 109, 110

240.172.00.1 107, 109

240.173.00.1 111

240.189.00.1 106, 107

240.206.00.1 107, 109, 112

240.226.11.1 103

240.269.00.1106, 107, 108,

109

240.276.00.1 114

240.278.00.1 114

240.282.00.1 107, 109

240.298.00.1106, 107, 108,

109

240.306.00.1 112

240.315.00.1 112

240.347.00.1106, 107, 108,

109

240.417.00.1 107

240.419.00.1 72

240.495.00.1 103

240.533.00.1 107, 109

240.573.00.1 109, 110

240.574.00.1 110

Article no. Page


Numerical index

240.575.00.1 110

240.576.00.1 109

240.623.00.1 107

240.622.00.1 106, 108

240.623.00.1 109

240.625.00.1 99

240.626.00.1 99

240.634.00.1 93, 94, 95, 98

240.635.00.1 93, 94, 95, 98

240.637.00.1 107, 109

240.638.00.1 107, 109

240.639.00.1 112

240.646.00.1 112

240.665.00.1 101

240.700.00.1 89, 109

240.705.00.1106, 107, 108,

109

240.771.00.1106, 107, 108,

109, 113

240.846.00.1 107, 109

240.922.00.1 106, 107, 109

240.923.00.1 106, 108

240.928.00.1 107, 109

240.930.00.1 111

240.933.00.1 111

240.934.00.1 111

240.935.00.1 111

240.936.00.1 111

240.938.00.1 21, 110, 112

240.972.00.1 107

241.144.00.1 23

241.167.00.1 106, 108

241.198.00.1 22

241.198.21.1 22

241.199.11.1 21

241.199.21.1 21

241.282.21.1 22

241.295.00.1 110, 112

241.350.00.1 114

241.378.00.1 108, 109

241.413.21.1 110

241.414.00.1 110

241.415.00.1 110

241.516.CG.1 104

241.517.CG.1 104

241.631.00.1 54

241.672.00.1 54

241.692.00.1 44

241.800.KD.1 114

241.801.00.1 114

241.813.00.1 110, 113

241.819.00.1 91, 92, 97

241.824.00.1 106, 108

241.826.00.1 106, 108

241.829.00.1 106, 108

241.857.00.1 106, 108

Article no. Page

241.858.00.1 106, 108

241.859.00.1 106, 108

241.868.00.1 106, 108

241.869.00.1 106

241.874.00.1 110

241.876.00.1 110

241.894.00.1 74

241.930.00.1 113

241.933.00.1 113

241.934.00.1 113

241.947.00.1 113

241.982.00.1 106, 108

242.010.00.1 106

242.012.00.1 106

242.017.00.1 106

242.039.00.1 112

242.045.00.1 112

242.046.00.1 112

242.130.00.1 113

242.131.00.1 113

242.156.00.1 113

242.169.11.1 102

242.170.11.1 104

242.171.11.1 104

242.172.11.1 104

242.173.00.1 105

242.174.00.1 105

242.175.00.1 105

242.176.00.1 105

242.178.11.1 104

242.179.11.1 103

242.180.11.1 103

242.181.11.1 103

242.182.11.1 103

242.183.11.1 103

242.184.11.1 102

242.185.00.1 97

242.186.11.1 104

242.187.00.1 103

242.195.00.1 112

242.210.00.1 112

242.286.CG.1 104

242.310.00.1 74

242.355.00.1 91, 92, 98

242.376.00.1 105

242.377.00.1 105

242.394.00.1 100

242.413.00.1 91, 92, 97

242.516.00.1 112

242.544.GH.1 18

242.545.00.1 99

242.546.00.1 99

242.547.00.1 99

242.555.00.1 74

242.658.00.1 28

242.676.00.1 105

Article no. Page

249.801.00.1 93, 94, 95, 98

250.022.00.1 99

250.026.00.1 101

250.027.00.1 102

250.029.11.1 101

250.030.11.1 102

250.032.00.1 100

250.034.11.1 100

250.037.11.1 102

250.043.00.1 100

250.066.11.1 101

250.067.11.1 101

250.068.00.1 101

250.069.00.1 101

250.071.00.1 100

250.079.11.1 102

256.000.00.1 109, 110

261.157.00.1 89

261.200.00.1 114

261.358.00.1 113

261.630.00.1 114

281.206.00.1 89, 110

282.350.KD.1 90

294.802.00.1 109

362.771.00.1106, 107, 108,

109

362.796.92.1106, 107, 108,

109

366.061.16.1 76, 106, 107

366.820.92.1 106, 107

366.887.16.1 75

367.792.16.1 76

367.887.16.1 75

367.928.16.1 77, 106, 107

367.945.16.1 77

387.282.00.1 106, 107

388.350.29.1 75

461.030.00.1 73

465.027.00.1 108

616.030.00.1 54

813.224.15.0 105

813.514.00.1 111

816.418.00.1106, 107, 108,109, 110, 114

849.825.00.1 105

889.711.00.1 108

890.240.11.1 109

892.975.00.1 108

F107.35.09B 78

F107.35.18B 78

F107.35.29B 78

Article no. Page

product guide - first class wet rooms€¦ · traps page 80 fill and flush valves for ceramic...

Documents