Product Guide: Concrete Repair

Waterproof & Protective Coatings

Concrete Restoration

Moisture Vapor Mitigation & Self-Leveling Underlayments & Toppings

Injection Grouting

CRACK MENDERRapid-setting crack repair system• Very low viscosity for deep penetration• Bonds very well to concrete• Very fast set time• Grind surface in 15 minute, quick return to service• Broad application temperature range

EPOXY-Baseplate GroutUltra fast setting, cementitious water stop• Easy mixing – pre-packaged kit• Vibration resistant• Fast cure, non-shrink

Epoxy

Concrete deteriorates over time as it is exposed to the elements, freeze/thaw cycles, submerged or in contact with water and subjected to abrasion and other factors. AQUAFIN Inc. has been in the waterproofi ng and concrete repair market for 25 years and offers an advanced full systems approach to concrete repair and restoration.

Concrete repair

Structural RepairsMORTAR-WSOne-component, cementitious, wet process sprayable structural repair mortar• Good freeze/thaw resistance• High compressive strengths• Impairs the passage of CO2• Cures with low shrinkage and free from cracks even

under dynamic loading

MORTAR-40One-component, cementitious, pumpable structural repair mortar• Up to 1.5” (40 mm) vertical application per layer• Up to 4” (100 mm) horizontal application per layer• Shrinkage compensated• Trowel or spray application• Can be used for “form & pour” applications

MORTAR-ScreedOne-part, polymer-modifi ed, concrete screed and repair mortar• For screed repairs and overlays up to 5” neat• Fiber reinforced• Low shrinkage• Wide consistency range from semi-dry to plastic

MORTAR-V/OOne-component, nonsag, vertical and overhead concrete repair mortar• Up to 2” (50 mm) without forming• Very low sag - excellent “hang” characteristics• Low shrinkage• Excellent workability - can be sculpted and shaved

with ease

MORTAR-QuickPatchOne-component, rapid setting horizontal patching mortar & resurfacer• Featheredge to 3” (75mm)• Natural gray to blend with existing concrete• For interior and exterior use• Outstanding workability and ease of placement• Fast setting - walk on in approx. 1 hour, covered

with many fl oor coverings within 16 - 24 hours.

MORTAR-LNUniversal waterproofi ng, repairing & lining mortar• Use both interior and exterior• Polymer modifi ed• Waterproof at 1/4“ thick• NSF/ANSI 61 potable water certifi ed• Trowel or spray application

Surface Repair

Crystalline EnhancedMORTAR-ICOne-component, fast setting waterproof repair & sealing mortar• Applied to positive or negative water pressure side• Resists strong hydrostatic pressure• Post sealing effect of shrinkage cracks up to 1/64”

(0.4mm) together with AQUAFIN-IC

PLUG-ICFast setting crystalline cementitious waterstop & patching mortar• Stops water leaks in two to three minutes• Water stopper and structural repair mortar• Easy application• Non-metallic and chloride freeRebar & Corrosion Protection

REBAR PRIMER/BOND-CICementitious bonding agent with active corrosion inhibitor• Single component - mixes with water only• Extended pot life and contact time• Resistant to penetration of water and chlorides• Very easy to use on vertical and overhead areas• Extended contact time allowing for repair mortars

up to 3 days after application

AQUAFIN, Inc.Triumph Industrial Park505 Blue Ball Rd., #160Elkton, MD 21921

Toll Free: 1-866-AQUAFINweb: www.aquafi n.net

AQUAFIN Inc. was founded in January 1989 and is a member of the SCHOMBURG Group.

AQUAFIN offers a full range of products to repair, protect, waterproof and vaporproof concrete, masonry, brick, and stone substrates.

In addition to providing the highest quality products we are dedicated to supporting our clients with technical expertise and practical know how gained over many years of on-the-job experience.

AQUAFIN products are for professional use only, not for sale to or use by the general public.

Aquafi n, Inc. is a member of the SCHOMBURG Group

Download our App today!