product guide · 2019-10-14 · engine (with mdec ecu) and leroy somer alternator and the other is...
TRANSCRIPT
PRODUCT GUIDEElectronic edition – Associated Control Products
The interactive simulator provides a taste of the new InteliVision 8, with demo and preview options illustrating screen information and function.
simulator
ONLINE
InteliVision 8 is a new generation colour display unit for InteliGenNT, InteliSysNT, InteliMainsNT and InteliDrive
controllers. It is designed as a simple, easy to use Plug and Play solution, which also features our
unique TRENDS monitoring as a standard feature.
It is the first colour display in the Power Generation field.
More info on page 54.
www.comap.cz/intelivision8
The InteliDrive Mobile is a highly flexible sophisticated mobile electronic controller, which features outstanding control, monitoring and protection for diesel and gas engines as well as driven technology.
The new controller offers range of specific functions suitable for mobile applications as hydraulic system control, communication with sensors and operational devices control.
Most commonly, these tailored applications meet the specific control requirements of mobile hydraulics, engine driven compressors and pumps.
InteliDrive® Mobile
SWITCHED ONTO INNOVATION
InteliCompact NT
InteliCompactNT models are new integrated
controllers for gen-sets operating in both
standby and parallel modes. Functionality,
optimized for ease of use, installation and
configuration, includes built-in synchronizer
and digital isochronous load sharer.
… more on page 14
more on page 40
SWITCHED ONTO INNOVATION
The new InteliATSNT controllers are
designed to monitor the incoming AC
mains supply (1 or 3 phases) for under
voltage, over voltage, under frequency,
over frequency and voltage unbalance.
… more on page 8
InteliATS NT
WELCOME TO OUR PRODUCT GUIDE
Following the positive feedback from our first Product Guide we have updated the second issue
with more information on an ever-growing range of control products.
In the meantime, our design and development teams have worked very hard to create exciting new
control solutions to meet customers’ application needs – all of which are
detailed in the new guide.
We hope you find it just as useful and practical as before. Inside you will
find technical information, product features and functions, alongside
customer feedback on how the products have performed in the
field. Hearing what you think is very important to us, so if you would like
to share you experience of using our products please let us know by
emailing your story to [email protected]
Overall, it offers a comprehensive guide to our entire range of products
and accessories. I hope you find it both helpful and invaluable.
Regards Libor Mertl – Managing Director
Power Generation Controllers 7
ATS controllers 8
Gen-set controllers 10
Generator controllers 28
Drive Power Controllers 33
Engine controllers 34
Off-road machinery controllers 40
Associated Control Products 43
Accessories 44
PC tools 58
Mains protections 62
Electronic potentiometers 64
Applications 65
Power generation applications 66
Drive power applications 80
About ComAp 91
CONTENT
The comprehensive family of extension modules and control accessories enable users to custom design control systems to meet individual project requirements and bring wider scope and flexibility to ComAp control products.
Accessories 44
ComAp dedicated PC software and configuration tools ensure operating and monitoring generator and engine controllers is both easy and accessible. The software is custom designed to ensure the optimum performance of ComAp controllers and helps users configure, supervise and monitor as well as management and interpret trend information.
PC tools 58
ComAp line of mains protection relays that provide the necessary security to your gen-set as well as prevent supplying electricity into islanded grid.
Mains protections 62
A choice of proven and reliable microprocessor controlled devices designed for control and regulation systems.
Electronic potentiometers 64
AS
SO
CIA
TE
D C
ON
TR
OL
PR
OD
UC
TS
Associated Control Products
43
A C C E S S O R I E S / E X T E N S I O N M O D U L E S
ANALOG OUTPUT EXTENSION MODULE
I-AOUT8ID
-RP
U
z 8 configurable analog outputs z Outputs are configurable to:
0–10 VDC or 0/4–20 mA range or 1,2 kHz PWM z Up to 4 units can be connected to 1 controller
A C C E S S O R I E S / E X T E N S I O N M O D U L E S
I-AOUT8 is an extension module with 8 configurable analog outputs for InteliGenNT, InteliSysNT, InteliMainsNT and InteliDrive controllers.
I-A
OU
T8
REDUNDANT PROTECTION UNIT
ID-RPUID-RPU is a redundant engine protection unit for InteliDrive DCU Marine controllers.
z Backup module for marine engines z Automatic switchover between primary and secondary power supply z Monitors function of main InteliDrive unit z In case of main unit failure switches to the backup mode and protects
the engine z RPM input with hardwired overspeed protection z 5 shutdown channels with Broken Wire detection z Fuel and Stop solenoids with BW detection
Features
Features
What do all those abbreviations and pictograms mean?
It’s easy. Go to page 95
44ID
IDIG-NT/IS-NT IM-NT
A C C E S S O R I E S / E X T E N S I O N M O D U L E S
ID-S
CM
1A C C E S S O R I E S / E X T E N S I O N M O D U L E S
ID-SCM is an interface module for InteliDrive controllers for full support of internal PLC.
ID-S
CM
ID-SCM1 is a cost effective Analog Speed Governor interface for InteliDrive controllers.
SPEED CONTROL MODULE
ID-SCM
SPEED CONTROL MODULE
ID-SCM1
AC
CE
SS
OR
IES
z RPM1, RPM2: Inputs for frequency measuring – up to 8 kHz z IMP1, IMP2: Inputs for integral (consumption) measuring up to 60 Hz z AOUT1, AOUT2: Analog outputs 0–10 VDC or 0–20 mA z Speed Governor Output: 10 VDC or 10 VDC via 10 kΩ or PWM (1,6 kHz) z The module is mounted directly on InteliDrive controller body
z ID-SCM1 represents cost effective version of ID-SCM z The module is mounted directly on InteliDrive controller body z Analog output options:
• 0 to 10 VDC• 0 to 10 VDC via 10 kΩ• PWM 5 V / 10 mA
Features
Features
45ID
ID
ANALOG/BINARY INPUT/OUTPUT MODULE
IG-IOMIG
L-R
A15
A C C E S S O R I E S / E X T E N S I O N M O D U L E S
IG-IOM is an extension module for InteliLiteNT, InteliCompactNT and MainsCompactNT controllers.
IG-I
OM
REMOTE ANNUNCIATOR
IGL-RA15IGL-RA15 is an extension signaling unit for most Inteli and Mains brand controllers.
z 8 configurable binary inputs and 8 configurable binary open collector outputs
z 4 configurable analog inputs and 1 analog output z LEDs indicate the state of binary input/output z Connection to the controller with IOM cable (2 meters) z Resistance range 0–2400 Ohm z Analog outputs 0–20 mA z One unit can be connected to 1 controller
z 15 programmable LEDs with configurable colors either red, green or yellow z Customizable labels z Local horn output with adjustable alarm period z Lamp test function z Connection via CAN bus z Up to 4 units can be connected to 1 controller
Features
Features
A C C E S S O R I E S / E X T E N S I O N M O D U L E S
46
IL-NT
IL-NT
ID-Lite ID
IC-NT
IC-NT
MC-NT
MC-NT
IG-NT/IS-NT IM-NT
A C C E S S O R I E S / E X T E N S I O N M O D U L E S
IGS
-PT
MANALOG/BINARY INPUT/OUTPUT MODULE
IGS-PTM
EN
GIN
E C
ON
TR
OL
LE
RS
AC
CE
SS
OR
IES
z 8 configurable binary inputs and 8 configurable binary open collector outputs z 4 configurable analog inputs and 1 analog output z LEDs indicate the state of binary input/output z Measures the values from Pt100 and Ni100 sensors z Analog inputs have the resistance range 0–250 Ohm, voltage range
0–100 mV, current range 0–20 mA – selectable via jumper z Analog output 0–20 mA z Connection via CAN bus z Up to 4 units can be connected to 1 controller
Features
IGS-PTM is an extension module for most Inteli and Mains brand controllers.
Neoenergia – a leader in the market of “energy rental/hire“ in Portugal. The company is using ComAp gen-set controllers and we asked the owner of the company to describe his experiences.
“Regarding our work, indeed we have been doing some very interesting applications with ComAp controllers, specially the last one with IG-NT controllers. The application involved paralleling two different gen-sets that already existed, working in Island.
This job was done in the biggest and most important Data Center of OPTIMUS (a large telecom-munications company) where the power supply is vital. There are emergency gen-sets that start at the same time when mains failure occurs, they synchronize and parallel between themselves and provide power supply to a 1000 KVA UPS system, as well as the rest power of the facilities.
The original and technical curiosity is the fact that one gen-set is a SDMO 1000 KVA with MTU engine (with MDEC ECU) and Leroy Somer alternator and the other is a F.G.WILSON 800 KVA with 3012 Perkins engine and Stamford alternator (2 different engines and 2 different alternators). We accepted this challenge and we have succeeded with fantastic results.
We have retired the installed controllers and we used the new IG-NT controllers, which significantly improved the capabilities of the system. Regarding the parallel application, we only use ComAp controllers for many reasons – the most advanced technology, the fantastic policy of ComAp in providing the software upgrades via Internet without costs, the constant evolution of software and the easy way of use. This special modern way of working (open and wide information) gives ComAp the leadership in their business.”
João Capelão ownerwww.neoenergia.pt
PortugalNeoenergia
47
IL-NT
ID
IC-NT MC-NT IG-NT/IS-NT IM-NT
A C C E S S O R I E S / E X T E N S I O N M O D U L E S
IS-A
IN8
z 8 configurable analog inputs z Precision of inputs is 1 % z Accepts 2 or 3 wire resistive, current and voltage senders z User and predefined sensor characteristics (Pt100, Pt1000, Ni100, Ni1000,
thermocouple type J/K/L, 0/4–20 mA, 0–10 V, etc.) z Connection via CAN bus z Up to 10 units can be connected to 1 controller
Features
ANALOG INPUT MODULE
IS-AIN8IS-AIN8 is an extension module for InteliGenNT, InteliSysNT, InteliMainsNT and InteliDrive controllers.
IL-NT AOUT8 / ANALOG OUTPUTS FOR PWM
IL-N
T e
xt.
mo
d.
z Detachable plug-in module z 4 Configurable Analog inputs: 2400 ohm,
20 mA, 4 VDC z 1 Analog output: 20 mA, 4 V, PWM
Features
z Detachable plug-in module z 8 binary inputs or outputs z Arbitrary combination of inputs/outputs
Features
A C C E S S O R I E S / E X T E N S I O N M O D U L E S
IL-NT AIO is an extension board increasing the number of analog inputs and outputs of InteliDrive Lite controllers.
IL-NT BIO8 / BINARY INPUT/OUTPUT (PWM) IL-NT BIO8 is an extension board in-creasing the number of binary inputs and outputs of InteliATSNT, InteliLiteNT, InteliCompactNT, MainsCompactNT and InteliDrive Lite controllers.
IL-NT AOUT8 is an 8 analog gauge plug-in interface module for InteliLiteNT, InteliCompactNT, MainsCompactNT and InteliDrive Lite controllers.
IL-NT AIO / ANALOG INPUT/OUTPUT MODULE
z 8 programmable analog PWM outputs z Resolution 10 bits z For indication of almost every
measured and computed value z May indicate output power, RPM, voltage, current, etc. z Support VDO style gauges
FeaturesGAUGES MODULE
MODULE
48
IL-NT ID-Lite
ID-Lite
ID
IA-NT IC-NT MC-NT
IL-NT ID-LiteIC-NT MC-NT
IG-NT/IS-NT IM-NT
A C C E S S O R I E S / E X T E N S I O N M O D U L E S
EN
GIN
E C
ON
TR
OL
LE
RS
AC
CE
SS
OR
IES
A C C E S S O R I E S / E X T E N S I O N M O D U L E S
LOAD SHARING INTERFACE MODULE
NT-Converter
z Connection of IG-NT/IS-NT to an existing system consisting of IG/IS classic line controllers
z Active and reactive load sharing and synchronizing parameters among the third-party gen-set controllers
z IG-NT/IS-NT and IG/IS classic line controllers can be monitoring via IG-MU, IG-IB or I-LB+
Features
NT-Converter is an interface module for InteliGenNT and InteliSysNT controllers.
NT-
Co
nve
rte
rIS
-BIN
16/8
BINARY INPUT/OUTPUT MODULE
IS-BIN16/8
z 16 configurable galvanically separated inputs z 8 configurable N.O. or N.C. relays outputs z 2 impulse inputs (frequency measurement or pulse counting) z LEDs indicate the state of binary input/output z Connection via CAN bus z Up to 6 units can be connected to 1 controller
Features
IS-BIN16/8 is an extension module for InteliGenNT, InteliSysNT, InteliMainsNT and InteliDrive controllers.
49
ID
IG-NT/IS-NT
IG-NT/IS-NT IM-NT
A C C E S S O R I E S / C O M M U N I C A T I O N M O D U L E S
INTERNET / ETHERNET MODULE INCLUDING WEB SERVER
IB-LiteI-
CR
A C C E S S O R I E S / C O M M U N I C A T I O N M O D U L E S
IB-L
ite
CAN REPEATER MODULE
I-CRI-CR is a CAN bus extension in cases where the maximum distance limit would be exceeded.
It can be used with InteliGenNT, InteliSysNT, InteliMainsNT and InteliDrive controllers.
z Plug-in module z Ethernet 10/100Mbit RJ45 interface z Web interface for configuration and firmware upgrade of the module z Fixed IP address (no DHCP) z ComAp protocol for communication with LiteEdit or InteliMonitor z SMTP protocol with authentication for sending of active e-mails z Modbus/TCP protocol for integration into building management systems z Web interface for basic monitoring and adjustment of the controller
z Intercontroller CAN bus extension (one or more I-CR modules can be used) z Intercontroller CAN bus bus-tie bridging – makes groups of controllers in
segments A and B „invisible“ to each other depending on bus-tie breaker state, keeping the PC communication in function for all controllers
z Peripheral CAN bus extension
Features
Features
IB-Lite is an Internet / Ethernet module for InteliATSNT, InteliLiteNT, InteliCompactNT, MainsCompactNT and InteliDrive Lite controllers.
IB-Lite gives you easy and efficient access to controllers
over Internet.
50
IL-NT ID-Lite
ID
IC-NTIA-NT MC-NT
IG-NT/IS-NT IM-NT
A C C E S S O R I E S / C O M M U N I C A T I O N M O D U L E S
IG-I
BA C C E S S O R I E S / C O M M U N I C A T I O N M O D U L E S
ID-COM is a communication module for multiple engine installations, remote displays and redundancy communication with InteliDrive controllers.
ID-C
OM
IG-IB is an Internet bridge for most Inteli and Mains brand controllers.
COMMUNICATION MODULE
ID-COM
INTERNET BRIDGE
IG-IB
OF
F-R
OA
D M
AC
HIN
ER
Y C
ON
TR
OL
LE
RS
AC
CE
SS
OR
IES
z Interface for CAN1 Extension and J1939 modules z Interface for CAN2 Inter-controller and I-RD-CAN modules z Interface for J1708 redundancy line
z Enables Internet connection between controllers and superior service or monitoring software
z Ethernet or dial-up connection of the controller to the Internet z Supports single/multiple gen-set control via Internet z Sends active e-mails in case of alarm appears on site z For more gen-sets additional hardware key (IG-IB3, IG-IB7, IG-IB15, IG-IB32)
is required
Features
Features
51
IL-NT
ID
ID
IC-NT MC-NT IG-NT/IS-NT IM-NT
z Detachable plug-in module z RS232 interface z Analog/GSM modem, Modbus support
Features
z Detachable plug-in module z USB interface z For service purposes
Features
A C C E S S O R I E S / C O M M U N I C A T I O N M O D U L E S
LOCAL BRIDGE
I-LB+IL
-NT
co
m. m
od
.A C C E S S O R I E S / C O M M U N I C A T I O N M O D U L E S
I-LB+ is a bridge for applications with InteliCompactNT, MainsCompactNT, InteliGenNT, InteliSysNT, InteliMainsNT and InteliDrive controllers for local or remote monitoring and control.
I-LB
+
z Direct, modem or USB connection to multiple controllers z RS232 / RS485 / Modbus support for direct connection z Analog / GSM / ISDN modem support
Features
IL-NT RS232 is an extension board containing RS232 port for InteliATSNT, InteliLiteNT, InteliCompactNT, MainsCompactNT and InteliDrive Lite controllers.
IL-NT RS232 / RS232 EXTENSION BOARD
IL-NT S-USB / SERVICE USB MODULEIL-NT S-USB is a USB module for InteliATSNT, InteliLiteNT, InteliCompactNT, MainsCompactNT and InteliDrive Lite controllers.
IL-NT RS232-485 is an extension board containing RS232 and RS485 ports for InteliATSNT, InteliLiteNT, InteliCompactNT, MainsCompactNT and InteliDrive Lite controllers.
IL-NT RS232-485 / DUAL PORT EXTENSION
z Detachable plug-in module z RS232 and RS485 interfaces z Analog/GSM modem, Modbus, ECU
link support
FeaturesBOARD
52
IDIC-NT MC-NT
IL-NT ID-LiteIC-NTIA-NT MC-NT
IL-NT ID-LiteIC-NTIA-NT MC-NT
IL-NT ID-LiteIC-NTIA-NT MC-NT
IG-NT/IS-NT IM-NT
A C C E S S O R I E S / R E M O T E D I S P L A Y S
I-R
D-C
AN
A C C E S S O R I E S / E C U C O M M U N I C A T I O N M O D U L E S
I-C
B
I-RD-CAN is a remote panel for InteliDrive DCU Industrial and InteliDrive DCU Marine controllers.
ECU COMMUNICATION BRIDGE
I-CB
REMOTE DISPLAY WITH CAN BUS INTERFACE
I-RD-CAN
AC
CE
SS
OR
IES
z Available for CAT DIESEL, CAT GAS / MTU MDEC / DEUTZ TEME z Less wiring and components integrated solution z Very flexible solution z User-friendly configuration tool z Prepared I–CB configurations for fast start-up z Remote access to detailed engine data remote servicing
z Remote control panel for the InteliDrive DCU master controller z Applicable up to 900 meters distance from the master controller z The same front facia, LED‘s and button handling z Two I-RD-CAN can be connected to one InteliDrive DCU controller z RS232 (38,4 kbps) or CAN bus (50 or 250 kbps) interface is available
Features
Features
I-CB is a communication device that bridges InteliGenNT, InteliSysNT and InteliDrive controller and the electronic control unit of the engine with a specific communication interface.
The I-CB module allows the user to fully utilize the potential possibilities of the engine’s electronic control unit (ECU); the controller can display and monitor all engine parameters provided by the ECU in very easy way. I-CB is to be delivered with many even non-CAN based proprietary protocol implementations.
53ID
IDIG-NT/IS-NT
CONTROLLER COLOUR DISPLAY UNITInteliVision 8 is a new generation colour display unit for either InteliGenNT / InteliSysNT (IG-NT/IS-NT), InteliMains (IM-NT) or InteliDrive (ID) controllers. It is designed as a simple, easy to use Plug and Play solution and has been developed from our original IS-Display.
The new InteliVision 8 screen features many significant improvements such as the large high-resolution colour TFT display, which helps visibility and definition for onscreen information. The control interface has also been updated with user-friendly intuitive active buttons – giving users access to more information in less time. InteliVision 8 also features our unique TRENDS monitoring as a standard feature, helping you evaluate past events easily on one screen.
The InteliVision 8 cut-out size is the same as the IS-Display (InteliSysNT), so InteliVision 8 can be easily used as a replacement for (or an alternative to) IS-Display. Regardless of the size it can be also used as a replacement for (or an alternative to) IG-Display LT GC or I-RD-CAN.
InteliVision 8 includes ComAp’s standard communication interface using RS232/485 and CAN bus communication. Designed to be mounted in both monitoring and engine room, InteliVision 8 gives complete access to all control functions when connected to InteliGenNT / InteliSysNT, InteliMainsNT or InteliDrive controllers.
InteliVision 8
A C C E S S O R I E S / R E M O T E D I S P L A Y S
Inte
liV
isio
n 8
z 8” colour TFT display with resolution 800 × 600 pixels z Customized initial screen logo and the content of a controller help z Same language support as InteliGenNT, InteliSysNT, InteliMainsNT and
InteliDrive (ID-DCU / ID-Mobile) z Allows full monitoring of ONE controller (in case of more controllers on
CAN it is possible to switch over among controllers monitoring by change of CAN address)
z The same dimensions as IS-Display (possible as a replacement for IG-Display LT GC, IS-Display or I-RD-CAN)
z Possibility to mount IS-NT-BB to the rear side of InteliVision z Possibility of MARINE version z Connection via of RS232/485 and CAN bus z Windows CE operating system z Operating temperature: –20 to + 70°C z EMC, climatic and mechanical tests z CE, UL certification z Face is sealed to IP65
z Large, colour screen with high-resolution z PLUG and PLAY operation (auto configuration based on
controller application) z Simpler, faster and more intuitive control z More information in less time z TRENDS monitoring screen z History columns’ features and adjustment z SCREEN CONFIGURATION by customer z Universal solution for IG-NT, IS-NT, IM-NT, ID-DCU and ID-Mobile z Direct connection to the controller (converters are not needed)
Features
Benefits
Standby system with load shedding – advanced displays
see page 74
Shunting locomotivesee page 83
TYPICAL APPLICATION:
* Certification will be available in Q2 2010
* * * * *
IM-NT
54
IDIG-NT/IS-NT
AC
CE
SS
OR
IES
The first InteliVision units operating in Mexico are installed in a prestigious hotel Sandos close to the famous Riviera Maya beach area. “The staff on site were delighted how easy and quick it was to inspect the gen-set using the new large colourful screens on the InteliVision unit, and the benefits provided by new features, especially trends reporting.”
Agustin de Jesus Garcia PastranaDupont Elektric Mexico Technician www.dwppon.com
ID
A ID-DCU Industrial
B ID-DCU Marine
C ID-Mobile
A ID-DCU Industrial
B ID-DCU Marine
C ID-Mobile
I. II.
INTELIVISION 8
ID
CAN2 I.
CAN2
RS232
CAN2
ID
INTELIVISION 8
INTELIVISION 8
INTELIVISION 8
A B C
A B C
A
A
B C
B
INTELIVISION 8
B
CAN2 II.
CAN2
CAN2
ID
INTELIVISION 8
INTELIVISION 8
INTELIVISION 8
INTELIVISION 8
I-CRB
B
Screens examples
Generator room at Hotel Sandos, Quintana Roo
Mexico
Customize your initial screen with any image you like – your company logo,
favourite picture or perhaps important information.
InteliVision8withIDcontrollers(all possible connections)
InteliVision8withIG-NT/IS-NTcontrollers(all possible connections)
INTELIVISION 8
RS485/RS232* (1)
INTELIVISION 8
IG-NT/IS-NT/IM-NT
CAN2
INTELIVISION 8
INTELIVISION 8
CAN2
IG-NT/IS-NT/IM-NT
3
3
INTELIVISION 8
INTELIVISION 8
INTELIVISION 8
INTELIVISION 8
1
1
1
1
1 2 3
1 2 3
1 2 3
1 2 3
RS485/RS232* (2)
21
2
3
*via RS232 port only one
INTELIVISION 8 unit can be connected
IS-NT-BB
IG-NT, IM-NT
IG-NTC
55
A C C E S S O R I E S / R E M O T E D I S P L A Y S
ADDITIONAL REMOTE DISPLAY
IG-Display LT GCIS
-Dis
pla
yA C C E S S O R I E S / R E M O T E D I S P L A Y S
IG-Display LT GC is a graphical remote display for InteliGenNT and InteliMainsNT controllers.
IG-D
isp
lay
LT
GC
DETACHABLE DISPLAY MODULE
IS-DisplayIS-Display is a graphical display for InteliSysNT controllers.
z Remote signalling and control unit with RS485 interface, Low Temperature display and Graphical Characters support, e.g. Chinese
z Gen-set can be controlled from IG-Display LT GC as well as from the master controller
z The distance from the master controller can be up to 1 km z IG-Display LT GC screens displays the same values as the master controller z Buttons and LEDs have the same function z Marine modification available z User administration
z Remote control and monitoring unit with RS485 interface z IS-Display can be mounted directly on IS-NT-BB or it can be used as
remote display z The distance from the master controller can be up to 1 km z Up to three displays can be connected to one InteliSysNT controller z Available modifications: LT (Low Temperature), GC (Graphical Characters,
e.g. Chinese), Marine z Numeric keypad for setpoints editing z User administration
Features
Features
56
IG-NT
IS-NT
IM-NT
A C C E S S O R I E S / A D D I T I O N A L M O D U L E S
Ad
dit
ion
al m
od
.A C C E S S O R I E S / S I M U L A T O R S
Portable unit, which simulates inputs and outputs of the real applications.
Kit
s
Interface between controller and various AVRs.
PORTABLE SIMULATOR
StarterKit
IG-AVRi / AVR INTERFACE
AC
CE
SS
OR
IES
z One mains and three gen-sets z Two mains, four gen-sets and
bus-tie breaker z Two propulsion engines and two
auxiliary gen-sets
Versions
Features
SIMULATOR OF VARIOUS APPLICATIONS
MultiKitSwitchboard with Inteli controllers for simulating multiple gen-set applications including simulation of load sharing and synchronization.
z 8 or 16 relays in socket z Both N.O. and N.C. contacts z 24 V or 231 V (I-RB 8/16-231 version only) z 16 A resistive and 4 A inductive load at 24 VDC z DIN rail design
Features
I-RB / 8 OR 16 RELAYS BOARDInterface module for galvanic separation of controller binary outputs.
z 4 kV electric insulation between controller and AVR
z DIN rail design
Features
Module connected between battery and controller power terminals to support controller operation during battery voltage dips.
I-LBA / LOW BATTERY ADAPTOR
z Keeps the controller operating during battery voltage drop, e.g. while the engine is cranking
z DIN rail design
Features
z Binary inputs are connected to switches z Binary output states are indicated by LEDs z Analogue inputs by potentiometers
57
IL-NT
IL-NT
ID-Lite
ID-Lite
ID
ID
ID
IC-NT
IC-NT
IC-NT
MC-NT
MC-NT
IG-NT/IS-NT
IG-NT/IS-NT
IC-NT IG-NT/IS-NT
IG-NT/IS-NT
IM-NT
IL-NT
ID-Lite ID
IC-NT MC-NT IG-NT/IS-NT IM-NT
IM-NT
P C T O O L S / M O N I T O R I N G S W
PC MONITORING TOOL
DriveMonitorIn
teliM
on
ito
r
z Active call receiving z All measured values include J1939 data monitoring z History record – alarm and operational states listing z Setpoints adjusting z Engine remote control z Direct, modem or Internet connection
P C T O O L S / M O N I T O R I N G S W
DriveMonitor is a PC monitoring tool for InteliDrive controllers.
Dri
veM
on
ito
r
PC MONITORING TOOL
InteliMonitorInteliMonitor is a free PC SCADA software for on-line supervision of most Inteli and Mains brand controllers. The software is focused on comfortable monitoring of a group of controllers.
z Configurable site structure z Easy site overview z Values, setpoints, history display z Statistics setting (kW hours, number of starts, etc.) z User administration z Direct, modem or Internet connection
Features
Features
IA-NT
ID-LiteIM-NT
IL-NT
58
ID
ID
IC-NT MC-NT IG-NT/IS-NT
P C T O O L S / M O N I T O R I N G S W
Win
Sco
pe
P C T O O L S / M O N I T O R I N G S W
InteliSupervisor is a PC monitoring and control tool for fleet of gen-sets or machines equipped with ComAp controllers using Internet or Modem communication.
Inte
liSu
pe
rvis
or
WinScope is a high-performance PC tool, which is used for monitoring and archiving trends of the controllers‘ parameters and values.
It can be used for all ComAp controllers including ECON, INCON and EMCON5.
PC TOOL FOR GEN-SET OR MACHINES FLEET MANAGEMENT
InteliSupervisor
SPECIAL GRAPHICAL CONTROLLERS‘ MONITORING SOFTWARE
WinScope
z Fast and convenient monitoring of the values’ time behaviour
z Measures and displays great number of trends from all controllers connected via I-LB+ / IB-Lite / IG-IB
z Adjustable period (10–10000 ms)
z Easy choice of quantity from list z Off-line mode for data analysis z A large number of graphic
functions z Graph printing possibility z Direct controller’s setpoints change
z Optical/sound indication of the unit state and detailed on-line alarms report
z Graphical interface z Direct access to basic information
about the unit state, run-hours to next service, actual power etc.
z Interface display: graphical / tabular
z Selectable graphical background (underlay bitmap)
z Regular and alarm-triggered download of the unit data
z In case of the unit alarm, e-mail notifies the service personnel
z Allows simple access to PC tools via InteliMonitor, WinEdit, MultiEdit
Features
Features
PC
TO
OL
S
Download a basic version of the Winscope software FREE
from www.comap.cz
59
IL-NT
ID-Lite ID
ID
IC-NTIA-NT MC-NT
IG-NT/IS-NT
IG-NT/IS-NT
IM-NT
IM-NT
IL-NT ID-Lite
P C T O O L S / C O N F I G U R A T I O N S W
PC CONFIGURATION TOOL
DriveConfigG
en
Co
nfi
gP C T O O L S / C O N F I G U R A T I O N S W
DriveConfig is an off-line PC configuration tool for InteliDrive controller customizing.
Dri
veC
on
fig
PC CONFIGURATION TOOL
GenConfigGenConfig is an off-line PC configuration tool for InteliGenNT, InteliSysNT and InteliMainsNT controller customizing.
Features
Features
z Inputs/Outputs modules addressing
z ID-DCU Inputs/Outputs configuration
z J1939 values configuration z History record configuration
z Password protection activation z Sensor characteristics
configuration z Programmable logic configuration z Controller texts translation z Graphical, user-friendly PLC editor
z Allows full configuration of an NT controller and its peripherals: • peripheral modules and ECU support • inputs/outputs • setpoints • commands • protections (for analog inputs/values) • PLC • history record • user sensors • languages
z Offers expert mode, consistency check and configuration cloning
60
ID
IG-NT/IS-NT IM-NT
PC
TO
OL
S
Key features of new release
z PLC functions can be moved both horizontally and vertically z Colour-coded and linked to relevant functions z Blocks can be organized to reflect the real process flow z Groups of blocks can be separated on each sheet to form sub-sets
within the design z Detailed descriptions of inputs and outputs come complete with
useful hints
The new ComAp PLC Editor is currently free to users who complete a short questionnaire on the ComAp website www.comap.cz allowing user analysis to be reviewed.
For more information visit www.comap.cz
PLC EditorPart of GenConfig configuration tool for selected ComAp controllers
Set up your own functions very easy and quickly.
PC CONFIGURATION AND MONITORING TOOL
LiteEdit
P C T O O L S / C O N F I G U R A T I O N A N D M O N I T O R I N G S W
LiteEdit is a PC configuration and monitoring tool for InteliATSNT, InteliLiteNT, InteliCompactNT, MainsCompactNT and InteliDrive Lite controllers.
Lite
Edit
z Remote control, monitoring and On-line / Off-line parameters adjustment z Controller and extension modules configuration, programming and cloning z Gen-set and ECU Alarm monitoring + complete real time history z Power format and ECU units selection, password protection setting z Controller text translation and language import wizard z Customized welcome text displayed on initial controller screen z Direct (RS232), modem, internet or off-line communication connection z Connection via RS485 and / or USB (using converter to RS232) z Support of electronic engines (values, alarms and commands)
Features
61
IL-NT ID-LiteIC-NTIA-NT MC-NT
M A I N S P R O T E C T I O N S
MainsPro is a protection instrument for mains-parallel applications, including generator sets, cogeneration, micro turbines or renewable energy sources such as photovoltaic plants or wind turbines. It provides adjustable voltage, frequency and loss of mains protections to safeguard both the power supplier and the generators.
MAINS PROTECTION RELAY
MainsPro
Features
United Kingdom WindmillsThe windmill application installed for a Cornish school features a 15 kW 3-phase turbine, generating at variable frequency, which is rectified then inverted to 50 Hz to allow connection to the mains grid. As the output for the windmill is above 16 amps per phase, a G59 panel between the inverter and mains is required which incorporates ComAp’s NPU-FUV* protection unit.
Mai
nsP
ro
More loads – multiple grids
see page 75
TYPICAL APPLICATION:
Czech Republic TEDOM
Czech Republic Photovoltaic cellsThe monocrystalline panel was installed on the south side of the roof at an angle of 30° by HiTechSolar in 2007.
The installation includes 22 individual panels each measuring 1680 × 990 × 50 mm combined with a Solar Max 4200 C current inverter and ComAp’s NPU* mains protection unit. The type of module is SOLARWATT 220 Wp and delivers an output power of 5 kWp.
“We have been using ComAp universal mains decoupling relay NPU-FU* and NPU-FUV* for over 10 years – installing over 1500 units during this time on both new projects and upgrading older installations.
Typically, our applications involve the NPU* unit being installed into switchboards of cogeneration units operating in parallel with the public distribution network. They accurately measure and evaluate mains parameters including under voltage, over voltage, under frequency, over frequency, voltage asymmetry, vector shift and phase sequence. Based on our experience over many years, we regard NPU* as our preferred choice for mains protection.”
Petr SedlákElectrical Department Managerwww.tedom.eu
* MainsPro is the next generation that has superseded NPU-FU and NPU-FUV
z Meets applicable requirements of IEC 60255 z Satisfies G59/2, ETR113, G77, G83 guidelines z True RMS measurement for increased accuracy and reliable evaluation
of failures z Vector Shift and ROCOF protections available in one unit to choose the best
fit to secure your site z Symmetrical components for precise detection of voltage asymmetry failures z Two stage settings of voltage and frequency protections to cover short
term as well as long term disturbances with appropriate priority. z Adjustable time delay of Automatic fault reset to avoid necessity of
on-site personnel z Universal power supply 8-40 VDC, 85-265 VAC, 110-370 VDC z Selectable voltage range 120/230/400 VAC with overreach to 156/290/520
VAC makes the unit independent on application z Supports 3-phase and 1-phase applications z Last trip recorded in order to provide the evidence of the trip reason
62
Inte
liPro
tec
M A I N S P R O T E C T I O N S
MA
INS
PR
OT
EC
TIO
NS
InteliProtec is a modular panel-mounted protection for generators operating in parallel to mains applications.
It incorporates a wide range of protection features, which include: voltage, frequency, vector shift, rate of change of frequency (ROCOF), directional overcurrent, overcurrent, earth fault, current, NVD and reverse power.
It also provides communication capabilities for local or remote communication via modem or Internet.
MAINS PROTECTION MODULE
InteliProtec
z 2 stage over/under voltage and frequency protections z Vector shift z Rate of change of frequency z Over current z Directional over current z Neutral voltage displacement z Current unbalance protection z Reverse power z Earth fault protections z Short term parallel protection z RS232 interface with Modbus support z Analog / GSM / ISDN modem support; SMS messages z Satisfies G59 guidelines
Features
United Kingdom Bank Data Centre
New Zealand Taranaki Hospital
Brazil JCPM Trade Center
Control panel made by ComAp Systems Ltd features five InteliMainsNT on the panel door and five InteliProtec units inside.
1 MW set installed in Taranaki Hospital by PowerGen of New Zealand, operates in parallel with the mains for bumpless return and also for peak lopping.
The JCPM Trade Center in Recife is one of the most modern business building, with the best technical specifications. The building is equipped with 3 Cummins gen-sets 450KVA, working in parallel. The system is protected by InteliProtec. The application works with 3 IG-CU with their respective extension modules IM-CU and IP-E. DCDN (Northeast Cummins Distributor) and Servintel International (ComAp distributor in Brazil) have developed the project and the switchboard to operate the gen-sets.
63
E L E C T R O N I C P O T E N T I O M E T E R S
ELECTRONIC POTENTIOMETER
EP250E
P3
00
E L E C T R O N I C P O T E N T I O M E T E R S
EP250 is a microprocessor controlled device with variable resistance at the output terminals.
The device is designed for application in control and/or regulation systems, where the input to the controlled device is a variable resistance.
EP
25
0
ELECTRONIC POTENTIOMETER
EP300EP300 is a microprocessor controlled device with variable resistance (3 wires potentiometer) at the output terminals.
The device is designed for application in control and/or regulation systems, where the input to the controlled device is a potentiometer.
z Microprocessor-controlled device designed for control and regulation systems
z 3 binary inputs (increase, decrease, init), one 2-pole output of variable resistance
z Position of the wiper is changed by binary inputs z Current percentage value is indicated by LED bar graph on the front panel z Setpoints (position change rate and init position) are adjustable via
DIP switches
Features
z Microprocessor-controlled device designed for control and regulation systems
z 3 binary inputs (increase, decrease, init), one 3-pole output of variable resistance (potentiometer)
z Position of the wiper is changed by binary inputs z Current percentage value is indicated by LED display on the front panel z Setpoints (position change rate, position limits, init position and others)
are adjustable via buttons and LED display on the front panel
Features
64
About ComAp
91
Excellent and reliable product solutions
ComAp specializes in creating electronic control and
management solutions for use in the power generation
industries and drive power markets. Our portfolio of
products, software and accessories is designed to support
emergency power, standby power generation and engine
driven applications all over the world. We also work closely
with our customers to develop unique customized and turn
key solutions for ordinary and extraordinary applications
delivering high standards of excellence on every project.
ComAp products
represent some of the
most reliable solutions
on the market today.
Every component and
product undergoes the
most rigorous standards
during manufacture,
with every stage being
undertaken in accordance
with international ISO
9001 certification. Our
products are backed
with the approvals from
92
ComAp
ComAp is a dynamic international company with a solid reputation for delivering innovative electronic solutions to the power generation, industrial engine and equipment markets. By providing customers with state-of-the-art products, ComAp has built a name for delivering excellent reliability and good value.
major Marine Certification Societies. Accreditation at the
highest-level breeds confidence, and every ComAp product
is supplied with an appropriate warranty and after-sales
support for complete peace of mind.
People make the difference
ComAp‘s key strengths are flexibility, experience,
knowledge and enthusiasm. This blend of values defines
our personality and gives you the assurance of a truly
honest and positive relationship. By supporting our
people, investing in their development and encouraging
creativity, our teams work hard to find new opportunities,
technologies and solutions that enable us to successfully
help our customers solve their problems effectively.
At ComAp, we believe passionately in the importance
of continuously developing new technology along with
forward thinking software and hardware to maintain the
enviable position as worldwide leader in communication
and control for power generation and drive power
applications.
At the heart of this process
is a strong desire to
exceed our customers’
expectations by finding
outstanding solutions for
them and drawing upon the
company’s most valuable
asset – people. Over 80 %
of ComAp employees are
graduates with specialized
electronic and programming
knowledge appropriate to
the innovative development
of market-orientated
engine management
systems. This unique
know-how is matched
by ComAp’s significant
investment at every stage of the research and development
process, resulting in the creation of leading edge modern
development facilities. ComAp consistently set high
standards, reflected by our achievement in the ‘Best
Employers Study in the Czech Republic‘ (conducted by
Hewitt Associates), where we were awarded first place in
2008 following our consecutive third places in both 2006
and 2007.
ComAp Systems
ComAp’s expertise extends beyond innovative controllers
to include a range of subsidiary businesses specializing
in related services including bi-fuel conversions, power
energy systems solutions and gas engine management.
These subsidiaries are located in key strategic regions
around the world ensuring our customers benefit from
local capability coupled with global reach. Most of them are
named ComAp Systems and more information is available
on each business at www.comapsystems.com.
93
Key Milestones
1991Establishment of ComAp.
1993Successful commissioning of four
Gen-set Control Systems made by ComAp on
Mediterranean islands.
1994MX controller, the second generation of
ComAp’s gen-set control systems, was
launched.
1996PX, the revolutionary gen-set controller
with configurable input and outputs, was
developed.
1999The strategic co-operation with HuegliTech
Company significantly increased our
distribution network.
2000InteliGen, the first member of the Inteli family
and flagship of our gen-set control systems,
was released.
2001ComAp Ltd. – 100 % UK based ComAp
subsidiary was established close to Bristol.
2002InteliSys, our top end product dedicated to
CHP and large engine control applications, was
released. New mid-range product InteliLite was
launched for AMF and MRS applications.
2004InteliDrive controller for non gen-set, engine
driven applications was released.
2006ComAp LLC – ComAp subsidiary to promote
products in the USA and Canada.
2007InteliVision – the first color display unit in
power generation field.
2008InteliCompact – controller for simple
paralleling gensets.
94
Professional partnerships
ComAp products are directly available in more than 60 countries,
spanning almost every continent in the world. Through our
professional and highly dedicated global distributor network we
can satisfy customers’ needs, however challenging.
Each ComAp distributor is carefully selected for their
professionalism, product expertise and recognized quality
standards and accreditation, and as such can advise customers
on any matter relating to ComAp products and their applications.
For detail information about the distributors, please visit www.comap.cz/distributors
Algeria HUEGLI TECH FRANCE www.huegli-tech-france.fr
Argentina SERVINTEL INTERNATIONAL S.A. www.servintel.com.ar
Australia GREENBIRD TECHNOLOGY www.greenbird.com.au
Austria HUEGLI TECH AG (LTD) www.huegli-tech.com
Bangladesh MADHURA INTERNATIONALwww.madhura.net
Bosnia and Herzegovina
KOCH D.O.O. www.koch.ba
Brazil SERVINTEL INTERNATIONAL S.A www.servintel.com.ar
Canada COMAP LLC www.comapllc.com
Chile SERVINTEL INTERNATIONAL S.A. www.servintel.com.ar
China JONES ENGINEERING CO., LTD. www.jones.com.hk
Costa Rica PROPACE INGENIERIA, S.A www.propace.net
Croatia KONTROLNI SISTEMI D.O.O. www.kontrolni-sistemi.hr
Denmark TECHNOFLEX www.technoflex.dk
Ecuador MECANO EQUIPOS S.A. e-mail: [email protected]
Egypt POWER FOR CONTRACTING & ELECTRO. www.elmotahdagroup.com
Faroe Islands TECHNOFLEX www.technoflex.dk
Finland TAPIMEC OY www.tapimec.fi
France HUEGLI TECH FRANCE www.huegli-tech-france.fr
Germany SCANDIESEL GMBH www.scandiesel.de
Greece ALFA-SIGMA LTD www.sapounas.gr
Greenland TECHNOFLEX www.technoflex.dk
Hong Kong JONES ENGINEERING CO., LTD. www.jones.com.hk
India MADHURA INTERNATIONAL www.madhura.net
Indonesia HUEGLI TECH ASIA PTE LTD www.huegli-tech.com
Iraq SPEED ELECTRO e-mail: [email protected]
Ireland INDUSTRIAL POWER UNITS LTD. www.ipu.co.uk
Israel GENERKAL INDUSTRIES LTD. www.generkal.co.il
Italy BIMOTOR S.R.L. www.bimotor.it
Lebanon JABBOUR DATAKOM S.A.R.L. www.jabbourpower.com
Macedonia KOCH D.O.O. www.koch.ba
Malaysia HUEGLI TECH ASIA PTE LTD www.huegli-tech.com
Mexico DUPONT ELEKTRIC MEXICO, SA DE CV www.dwppon.com
Netherlands CONTROLIN BV www.controlin.nl
New Zealand GREENBIRD TECHNOLOGY www.greenbird.com.au
Nigeria MIKANO INTERNATIONAL LIMITED www.mikano-intl.com
Norway INDUSTRIMARIN AS www.industrimarin.com
Pakistan R.A. ENGINEERING & SERVICES www.raeng.com
Peru CROSLAND TÉCNICA S.A. www.crosland.com.pe
Philippines BLACKSTONE POWER & CONT. PHILS., INC. e-mail: [email protected]
Romania SC. CG. CONFAUR SRL www.cgconfaur.ro
Russia HUEGLI TECH RUSSIA www.huegli-tech.com
Saudi Arabia BLACK BOX AUTOMATION & CONTROL www.blackboxcontrol.com
Serbia and Montenegro
KOCH D.O.O. www.koch.ba
Singapore HUEGLI TECH ASIA PTE LTD www.huegli-tech.com
South Africa FAR DIESEL POWER SERVICES CC www.fardiesel.com
South Korea BOO YOUNG CORPORATION e-mail: [email protected]
Sri Lanka MADHURA INTERNATIONALwww.madhura.net
Sweden INDUSTRIMARIN AB www.industrimarin.com
Switzerland HUEGLI TECH AG (LTD) www.huegli-tech.com
Taiwan ARITH COMPANY LTD. www.arith.com.tw
Thailand DAVEN CO., LTD. e-mail: [email protected]
Tunisia GAM-GÉNÉRAL DES APPLICATIONS MÉC. www.gam.com.tn
Turkey BETEX ENGINEERING IMPORT & EXPORT www.betex.com.tr
United Arab Emirates
BLACK BOX AUTOMATION & CONTROL www.blackboxcontrol.com
United Arab Emirates
DORNA SANAT MEHR www.dornamehr.com
United Kingdom
INDUSTRIAL POWER UNITS LTD. www.ipu.co.uk
United States
COMAP LLC www.comapllc.com
Uruguay SERVINTEL INTERNATIONAL S.A. www.servintel.com.ar
Vietnam HUEGLI TECH REPRESENTATIVE OFFICE www.huegli-tech.com
These pictograms are designed to help you visually associate
which Accessories and PC tools are suitable for use with
which controllers.
We have also provided both the full product names and their
abbreviated shorter names to help you recognize and identify
the products more easily.
If you look throughout the brochure you will see these icons
appearing next to the relevant or associated product.
A-Z Page Index
Product name Page
DriveConfig 60
DriveMonitor 58
EP250 64
EP300 64
GenConfig 60
I-AOUT8 44
IB-Lite 50
I-CB 53
I-CR 50
ID-COM 51
ID-RPU 44
ID-SCM 45
ID-SCM1 45
IG-AVRi 57
IG-Display LT GC 56
IG-IB 51
IG-IOM 46
IGL-RA15 46
IG-NTC 400Hz LT GC 26
IGS-PTM 47
I-LBA 57
I-LB+ 52
IL-NT AIO 48
IL-NT AOUT8 48
IL-NT BIO8 48
IL-NT RS232 52
IL-NT RS232-485 52
IL-NT S-USB 52
InteliATSNT 8
Full name Short name Pictogram
InteliATSNT IA-NT
InteliLiteNT IL-NT
InteliCompactNT IC-NT
MainsCompactNT MC-NT
InteliGenNT IG-NT
InteliSysNT IS-NT
InteliGenNT and InteliSysNT IG-NT/IS-NT
InteliMainsNT IM-NT
InteliDrive Lite ID-Lite
InteliDrive ID
InteliVision 8 IV8 —
Product name Page
InteliCompactNT MINT 16
InteliCompactNT SPtM 14
InteliDrive DCU Industrial 36
InteliDrive DCU Marine 38
InteliDrive Lite 34
InteliDrive Mobile 40
InteliGenNT 20
InteliGenNT GeCon 28
InteliLiteNT AMF 12
InteliLiteNT MRS 10
InteliMainsNT 24
InteliMonitor 58
InteliProtec 63
InteliSupervisor 59
InteliSysNT 22
InteliVision 8 54
I-RB 57
I-RD-CAN 53
IS-AIN8 48
IS-BIN16/8 49
IS-Display 56
LiteEdit 61
MainsCompactNT 18
MainsPro 62
MultiKit 57
NT-Converter 49
StarterKit 57
WinScope 59
Pictograms and short names
95
ComAp, spol. s r. o.
Kundratka 2359/17 • 180 00 Praha 8 • Czech Republic
Phone: + 420 246 012 111 • Fax: + 420 266 316 647
[email protected] • www.comap.cz
Manufacturer
Local Distributor / Partner
© ComAp. 2010-01/CPCEPRGU. All rights reserved.
Specifications in this Product Guide are subject to change without notice.
Customer satisfaction is our mission. We continuously develop the best people to succeed in our mission.
We are looking forward to your visit.