product datasheet ronda series · 2019. 10. 12. · form and position: class l scale 1:1 weight -...
TRANSCRIPT
PRODUCT DATASHEETRonda serieslast update 19/8/2016
DETAILS
Product Number FCN15621_RONDA-W
Family Ronda
Type Assembly
Color white
Diameter 69,9 mm
Height 14,6 mm
Style round
Optic Material PMMA
Holder Material PC
Fastening
Status production ready
ROHS Comliant Yes
Date Updated 19/08/2016
OPTICAL PROPERTIES Viewing Light Effi-
LED Angle Beam ciency cd/lm Connector
V10 sim: 44 Wide 88 % sim: 0.000 Bender Wirth: 455 Typ L1
CLU710 sim: 44 Wide 89 % sim: 0.000 Bender Wirth: 470 Typ L1
CLL02x/CLU02x (LES10) sim: 42 Wide 88 % sim: 0.000 Bender Wirth: 434 Typ L1
CXA/B 15xx sim: 42 Wide 88 % sim: 0.000 Bender Wirth: 441 Typ L1
CXA/B 1816 & CXA/B 1820 & CXA 1850 sim: 48 Wide 88 % sim: 0.000 Bender Wirth: 437 Typ L1
Mini Zenigata (GW6BM) sim: 40 Wide 89 % sim: 0.000 Bender Wirth: 452 Typ L1
September 13th 2016 16:17 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland
http://www.ledil.com email: [email protected] FAX: +358-2-733 8001
Examples
AH BG
DE CF BG AH
33
22
44
11
Tolerances if not otherwise shownAccording to DIN ISO 2768-1Linear measures:up to 30mm class M, otherwise class CAccording to DIN ISO 2768-2Form and position: class L
SCALE 1:1 WEIGHT - SHEET 1/3
SIZE
A3
DRAWING TITLE
PART NUMBER
-
Ledil OySalorankatu 10FIN 24240 SALOFinland
THIRD ANGLE PROJECTION:
This drawing is the propertyof LEDiL Oy. It may not bereproduced, copied orcommunicated without a writtenagreement with LEDiL Oy.
See more details on page 2 and 3
RONDA-family
Ledil-clamp / TE / Bender-wirth / other twistand lock socket types (holder A)
LES size up to ~14mm, seecompatibility www.ledil.com
D=69.9mm Optic
D=49.9Front plate examples
BJB and Stucchi 50mm (holder B)
Vertical fix: M3 Screw /Twist and lock / SnapRotation fix Horizontal fix: M3 Nut + bolt
AH BG
DE CF BG AH
33
22
44
11
Tolerances if not otherwise shownAccording to DIN ISO 2768-1Linear measures:up to 30mm class M, otherwise class CAccording to DIN ISO 2768-2Form and position: class L
SCALE 1:1 WEIGHT - SHEET 2/3
SIZE
A3
DRAWING TITLE
RONDA-familyPART NUMBER
-
Ledil OySalorankatu 10FIN 24240 SALOFinland
THIRD ANGLE PROJECTION:
This drawing is the propertyof LEDiL Oy. It may not bereproduced, copied orcommunicated without a writtenagreement with LEDiL Oy.
11.212.7
14.6
7.7
ronda-was
8 .9
4
Front view
Socket
2.4 *
6
3 .5
2.2
64.1
()
59.3
Bottom view
Nut slot
69.9
hold
er
49.9
optic61
3.23.2
3.2
45.8
(
)53.3
Top view
Isometric view
Front panel location suggestion whenseamless look needed
* Ensure from 3d according specific optic version
A
Detail A
AH BG
DE CF BG AH
33
22
44
11
Tolerances if not otherwise shownAccording to DIN ISO 2768-1Linear measures:up to 30mm class M, otherwise class CAccording to DIN ISO 2768-2Form and position: class L
SCALE 1:1 WEIGHT - SHEET 3/3
SIZE
A3
DRAWING TITLE
RONDA-familyPART NUMBER
-
Ledil OySalorankatu 10FIN 24240 SALOFinland
THIRD ANGLE PROJECTION:
This drawing is the propertyof LEDiL Oy. It may not bereproduced, copied orcommunicated without a writtenagreement with LEDiL Oy.
TYPICAL CONNECTOR ASSEMBLY (including solderless BENDER WIRTHas example)
1. Place pin on the side of the lens into relativehole on the holder. B
DET B Pin
Holder hole
2. Press the lens under clips on the holder, ensuring bothclips are fixed.
Clip
Clip
Pin
OPTIC/HOLDER ASSEMBLY
1. Ensure correct relation of clamp andconnector before screwing. Recommendedtorque 0.6Nm.
2. Assemble LED, BENDER&WIRTH connectorand C13658_CLAMP-VERO13-18 clamp onheatsink with M3 screw.
3. Attach optic by aligning the holes inthe holder with hooks and turning theoptic holder clockwise until it locks.
Bender&Wirth model 4xx Typ L1
Align clamp positioning pin with holesin the connector.
NOTE: The typical divergence will be changed by different color, chip size and chip positiontolerance. The typical total divergence is the full angle measured where the luminous intensityis half of the peak value.GENERAL INFORMATION
- Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible.
Note! Due to use of high power COB's with this product, special attention to proper thermal design is highlyrecommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiLproducts being used outside of the recommended temperature range.