product data sheet · tp28-002-020 20 pp28 negro tp28-003-020 20 pp28 amarillo tp28-004-020 20 pp28...
TRANSCRIPT
Date: 10/05/2019
GENERAL INFORMATION
Product: PP28 screw cap, PE
Description:
SPECIFICATIONS
Referenceuds/
box
capacity
(ml)color
TP28-001-020 20 PP28 white
TP28-002-020 20 PP28 black
TP28-003-020 20 PP28 yellow
TP28-004-020 20 PP28 blue
TP28-005-020 20 PP28 red
TP28-007-020 20 PP28 orange
TP28-X01-020 20 PP28 white
"Saving package"
TP28-001-2K0 2000 PP28 white
PACKING
Type: Carboard box
Label:
MATERIAL
Product data sheet
With internal seal made of low density polyethylene foam covered with polyethylene film. For
our glass bottles references FRAN/FRAA, PET bottles references FPET/FPTA and HDPE bottles
references FRIP. Caution: for bottles FRIP-030-010 choose only TP28-X01-020 screw caps
TP28-001-020
PP28 screw cap, PE, 20 pcs
Tapón de rosca PP28 de polietileno, 20 uds
Bouchon à vis PP28 en PE avec bague d'inviolabilité, 20
unit
Batch nº.: xxxx
High density polyethylene (HDPE)
Temperature resistance in standard use: from -40ºC to + 80ºC
www.labbox.com
Date: 10/05/2019
INFORMACIÓN GENERAL
Producto: Tapón de rosca PP28 de polietileno
Descripción:
ESPECIFICACIONES
Referenciauds/
cajarosca color
TP28-001-020 20 PP28 blanco
TP28-002-020 20 PP28 negro
TP28-003-020 20 PP28 amarillo
TP28-004-020 20 PP28 azul
TP28-005-020 20 PP28 rojo
TP28-007-020 20 PP28 naranja
TP28-X01-020 20 PP28 blanco
"En pack ahorro"
TP28-001-2K0 2000 PP28 blanco
EMBALAJE
Tipo: Caja de cartón o plástico
Etiqueta:
MATERIAL
Ficha técnica de producto
Con junta interna fabricada en espuma de polietileno de baja densidad recubierta de
film de polietileno. Para los frascos de vidrio de referencia FRAN y FRAA, los de PET de
referencia FPET y FPTA y los de HDPE de referencia FRIP. Atención: para los frascos
FRIP-030-010 solo van bien los tapones TP28-X01-020
TP28-001-020
Batch nº.: xxxx
PP28 screw cap, PE, 20 pcs
Tapón de rosca PP28 de polietileno, 20 uds
Bouchon à vis PP28 en PE avec bague d'inviolabilité, 20 unit
Polietileno de alta densidad (HDPE)
Rango de temperaturas tolerado en condiciones de uso normales: de -40ºC a +80ºC
www.labbox.com
Date: 10/05/2019
INFORMATION GENERALE
Produit: Bouchon à vis PP28 en PE avec bague d'inviolabilité
Description:
CARACTERISTIQUES
Référenceunit./
lotfiletage couleur
TP28-001-020 20 PP28 blanche
TP28-002-020 20 PP28 noire
TP28-003-020 20 PP28 jaune
TP28-004-020 20 PP28 bleue
TP28-005-020 20 PP28 rouge
TP28-007-020 20 PP28 orange
TP28-X01-020 20 PP28 blanche
"En pack économie"
TP28-001-2K0 2000 PP28 blanche
EMBALLAGE
Type: Boîte de carton ou plastique
Etiquette:
MATÉRIEL
Fiche technique de produit
Avec joint interne fabriqué en mousse de polyéthylène basse densité recouvert d’un film de polyéthylène.
Pour les flacons en verre ayant comme références FRAN et FRAA, ceux en PET ayant comme références FPET
et FPTA et ceux en PEHD ayant comme référence FRIP. Attention : pour les flacons FRIP-030-010, choisir
uniquement les bouchons à vis TP28-X01-020
TP28-001-020
PP28 screw cap, PE, 20 pcs
Tapón de rosca PP28 de polietileno, 20 uds
Bouchon à vis PP28 en PE avec bague
d'inviolabilité, 20 unit
Batch nº.: xxxx
Polyéthylène de haute densité (PEHD)
Plage de températures tolérées dans les conditions normales d’utilisation : de -40ºC à +80ºC
www.labbox.com
labbox labware s.l. Joan Peiró i Belis, 2, 08339 Vilassar de Dalt (Barcelona) Spain
Phone +34 93 755 20 84 Fax +34 93 790 95 32 [email protected]
www.labbox.com
FOOD GRADE
Subject: Food Contact Declaration TP28
Labbox Labware declares, under the manufacturer responsibility, that our product above mentioned
comply with the relevant requirements of:
• The monomer(s) and the additive(s) of the raw material used are listed in Commission
Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with
food and all its Amendments including Commission Regulation (EU) 2018/79.
• The raw material was tested for the overall and specific migration compliance per Commission
Regulation (EU) No 10/2011. It complies with the overall migration limit (OML) and specific
migration limits (SML).
• The raw material meets the requirements of Framework Regulation (EC) No 1935/2004 on
materials and articles intended to come into contact with food.
04/08/2020
This document has been produced electronically and it is valid without signature