product code description - bio-rad laboratories · product code description ... 10000048962 protein...

Kit components27.06.2017

Product code Description

1632144 MicroRotofor™ Lysis Kit (Bacteria)

Components:10000048962 Protein Solubilization Buffer (PSB)10000048963 PSB Diluent10005460 Bacterial Suspension Buffer10005461 Lysozyme Solution

/7

Safety data sheetaccording to 1907/2006/EC, Article 31

Printing date 27.06.2017 Revision: 23.06.2017

45.0

SECTION 1: Identification of the substance/mixture and of the company/undertaking

· 1.1 Product identifier

· Trade name: Protein Solubilization Buffer (PSB)

· Article number: 10000048962· 1.2 Relevant identified uses of the substance or mixture and uses advised againstNo further relevant information available.

· Application of the substance / the mixture Laboratory chemicals

· 1.3 Details of the supplier of the safety data sheet· Manufacturer/Supplier:Bio-Rad Laboratories1000 Alfred Nobel DriveHercules, CA 94547

Bio-Rad Laboratories Korea10th Fl., Hyunjuk Bldg., 114 Yeoksam-ro,Gangnam-gu, Seoul 135-936, Korea

E-mail: [email protected] Phone: +82-2-3473-4460 FAX: +82-2-3472-7003

· Information department: [email protected]· 1.4 Emergency telephone number: 82-80-007-7373

SECTION 2: Hazards identification

· 2.1 Classification of the substance or mixture· Classification according to Regulation (EC) No 1272/2008Skin Corr. 3 H316 Causes mild skin irritation.

· 2.2 Label elements· Labelling according to Regulation (EC) No 1272/2008The product is classified and labelled according to the CLP regulation.

· Hazard pictograms Void· Signal word Warning· Hazard statementsH316 Causes mild skin irritation.

· Precautionary statementsP332+P313 If skin irritation occurs: Get medical advice/attention.

· 2.3 Other hazards· Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.

SECTION 3: Composition/information on ingredients

· 3.2 Chemical characterisation: Mixtures· Description: Mixture of the substances listed below with nonhazardous additions.

(Contd. on page 2) KOR

/7



Trade name: Protein Solubilization Buffer (PSB)

(Contd. of page 1)

45.0

· Dangerous components:CAS: 57-13-6EINECS: 200-315-5

ureasubstance with a Community workplace exposure limit

50-100%

CAS: 62-56-6EINECS: 200-543-5

thioureaCarc. 2, H351; Repr. 2, H361Aquatic Chronic 2, H411Acute Tox. 4, H302

20-35%

CAS: 15471-17-7 NDSB 201 (3-(1-pyridino)-1-propane sulfonate)Skin Irrit. 2, H315; Eye Irrit. 2A, H319; STOT SE 3, H335

2.5-5%

· Additional information For the wording of the listed hazard phrases refer to section 16.

SECTION 4: First aid measures

· 4.1 Description of first aid measures· After inhalation Supply fresh air; consult doctor in case of complaints.· After eye contact Rinse opened eye for several minutes under running water.· After swallowing Induce vomiting and call for medical help.· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.· 4.3 Indication of any immediate medical attention and special treatment neededNo further relevant information available.

SECTION 5: Firefighting measures

· 5.1 Extinguishing media· Suitable extinguishing agents Use fire fighting measures that suit the environment.· 5.2 Special hazards arising from the substance or mixture No further relevant information available.· 5.3 Advice for firefighters· Protective equipment: No special measures required.

SECTION 6: Accidental release measures

· 6.1 Personal precautions, protective equipment and emergency procedures Wear protective clothing.· 6.2 Environmental precautions: Do not allow to enter sewers/ surface or ground water.· 6.3 Methods and material for containment and cleaning up: Pick up mechanically.· 6.4 Reference to other sectionsSee Section 7 for information on safe handlingSee Section 8 for information on personal protection equipment.See Section 13 for disposal information.

SECTION 7: Handling and storage

· 7.1 Precautions for safe handling No special precautions are necessary if used correctly.· Information about protection against explosions and fires: No special measures required.

· 7.2 Conditions for safe storage, including any incompatibilities· Storage· Requirements to be met by storerooms and receptacles: According to product specification


/7




(Contd. of page 2)

45.0

· Information about storage in one common storage facility: Not required.· Further information about storage conditions: None.· 7.3 Specific end use(s) No further relevant information available.

SECTION 8: Exposure controls/personal protection

· Additional information about design of technical systems: No further data; see item 7.

· 8.1 Control parameters· Components with limit values that require monitoring at the workplace:

57-13-6 ureaWEEL (United States) Long-term value: 10 mg/m³

· Additional information: The lists that were valid during the creation were used as basis.

· 8.2 Exposure controls· Personal protective equipment· General protective and hygienic measures Wash hands before breaks and at the end of work.· Protection of hands: Protective gloves.· Material of gloves Synthetic gloves· Penetration time of glove materialThe exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.

· Eye protection: Safety glasses

SECTION 9: Physical and chemical properties

· 9.1 Information on basic physical and chemical properties· General Information· Appearance:

Form: Solid.Colour: White

· Odour: Odourless· Odour threshold: Not determined.

· pH-value at 20 °C: 6.5

· Change in conditionMelting point/freezing point: undeterminedInitial boiling point and boiling range: undetermined

· Flash point: Not applicable

· Flammability (solid, gaseous) Not determined.

· Ignition temperature: 440 °C

· Decomposition temperature: Not determined.

· Self igniting: Product is not selfigniting.

· Explosive properties: Product does not present an explosion hazard.

· Explosion limits:Lower: Not determined.


/7




(Contd. of page 3)

45.0

Upper: Not determined.

· Vapour pressure: Not applicable.

· Density: Not determined· Relative density Not determined.· Vapour density Not applicable.· Evaporation rate Not applicable.

· Solubility in / Miscibility withWater: Soluble

· Partition coefficient: n-octanol/water: Not determined.

· Viscosity:dynamic: Not applicable.kinematic: Not applicable.

· Solvent content:Organic solvents: 0.0 %

· 9.2 Other information No further relevant information available.

SECTION 10: Stability and reactivity

· 10.1 Reactivity No further relevant information available.· 10.2 Chemical stability· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.· 10.3 Possibility of hazardous reactions No dangerous reactions known· 10.4 Conditions to avoid No further relevant information available.· 10.5 Incompatible materials: No further relevant information available.· 10.6 Hazardous decomposition products: No dangerous decomposition products known

SECTION 11: Toxicological information

· 11.1 Information on toxicological effects· Acute toxicity Based on available data, the classification criteria are not met.· LD/LC50 values that are relevant for classification:

57-13-6 ureaOral LD50 14500 mg/kg (rat)

62-56-6 thioureaOral LD50 1750 mg/kg (rat)Dermal LD50 2800 mg/kg (rbt)

· Primary irritant effect:· Skin corrosion/irritationCauses mild skin irritation.

· Serious eye damage/irritation Based on available data, the classification criteria are not met.· Respiratory or skin sensitisation Based on available data, the classification criteria are not met.· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)· Germ cell mutagenicity Based on available data, the classification criteria are not met.


/7




(Contd. of page 4)

45.0

· Carcinogenicity Based on available data, the classification criteria are not met.· Reproductive toxicity Based on available data, the classification criteria are not met.· STOT-single exposure Based on available data, the classification criteria are not met.· STOT-repeated exposure Based on available data, the classification criteria are not met.· Aspiration hazard Based on available data, the classification criteria are not met.

SECTION 12: Ecological information

· 12.1 Toxicity· Aquatic toxicity: No further relevant information available.· 12.2 Persistence and degradability No further relevant information available.· 12.3 Bioaccumulative potential No further relevant information available.· 12.4 Mobility in soil No further relevant information available.· Additional ecological information:· General notes:Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water.Do not allow product to reach ground water, water course or sewage system.Danger to drinking water if even small quantities leak into the ground.

· 12.5 Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.· 12.6 Other adverse effects No further relevant information available.

SECTION 13: Disposal considerations

· 13.1 Waste treatment methods· Recommendation Dispose of waste in accordance to applicable national, regional, or local regulations.

· Uncleaned packagings:· Recommendation: Disposal must be made according to official regulations.· Recommended cleansing agent: Water, if necessary with cleansing agents.

SECTION 14: Transport information

· 14.1 UN-Number· ADR, IMDG, IATA UN3077

· 14.2 UN proper shipping name· ADR 3077 ENVIRONMENTALLY HAZARDOUS SUBSTANCE,

SOLID, N.O.S. (thiourea)· IMDG, IATA ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID,

N.O.S. (thiourea)

· 14.3 Transport hazard class(es)

· ADR, IMDG, IATA· Class 9 Miscellaneous dangerous substances and articles.· Label 9


/7




(Contd. of page 5)

45.0

· 14.4 Packing group· ADR, IMDG, IATA III

· 14.5 Environmental hazards:· Special marking (ADR): Symbol (fish and tree)· Special marking (IATA): Symbol (fish and tree)

· 14.6 Special precautions for user Warning: Miscellaneous dangerous substances and articles.· Danger code (Kemler): 90· EMS Number: F-A,S-F· Stowage Category A · Stowage Code SW23 When transported in BK3 bulk container, see 7.6.2.12 and

7.7.3.9.

· 14.7 Transport in bulk according to Annex II of Marpoland the IBC Code Not applicable.

· Transport/Additional information:

· ADR· Limited quantities (LQ) 5 kg· Excepted quantities (EQ) Code: E1

Maximum net quantity per inner packaging: 30 gMaximum net quantity per outer packaging: 1000 g

· Transport category 3 · Tunnel restriction code E

· IMDG· Limited quantities (LQ) 5 kg· Excepted quantities (EQ) Code: E1

Maximum net quantity per inner packaging: 30 gMaximum net quantity per outer packaging: 1000 g

· UN "Model Regulation": UN 3077 ENVIRONMENTALLY HAZARDOUS SUBSTANCE,SOLID, N.O.S. (THIOUREA), 9, III

SECTION 15: Regulatory information

· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture· Korean Existing Chemical Inventory

57-13-6 urea KE-3514462-56-6 thiourea KE-33805

15471-17-7 NDSB 201 (3-(1-pyridino)-1-propane sulfonate) 2000-3-148577-86-1 Tris(hydroxymethyl)aminomethane KE-01403

· Directive 2012/18/EU· Named dangerous substances - ANNEX I None of the ingredients is listed.· Seveso category E2 Hazardous to the Aquatic Environment· Qualifying quantity (tonnes) for the application of lower-tier requirements 200 t· Qualifying quantity (tonnes) for the application of upper-tier requirements 500 t


/7




(Contd. of page 6)

45.0

· National regulations

· Technical instructions (air):

Class Share in %

I 20-35

· Water hazard class: Water hazard class 2 (Self-assessment): hazardous for water.· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.

SECTION 16: Other informationThis information is based on our present knowledge. However, this shall not constitute a guarantee for any specific productfeatures and shall not establish a legally valid contractual relationship.

· Department issuing SDS: Environmental Health and Safety.· Contact:Life Science Group, Environmental Health and Safety, 2000 Alfred Nobel Drive, Hercules, California, 94547: 1(510) 741-1000

Diagnostic Group, Environmental Health and Safety, 4000 Alfred Nobel Drive, Hercules, California, 94547: 1(510) 724-7000· Abbreviations and acronyms:

ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage ofDangerous Goods by Road)IMDG: International Maritime Code for Dangerous GoodsIATA: International Air Transport AssociationGHS: Globally Harmonised System of Classification and Labelling of ChemicalsEINECS: European Inventory of Existing Commercial Chemical SubstancesELINCS: European List of Notified Chemical SubstancesCAS: Chemical Abstracts Service (division of the American Chemical Society)LC50: Lethal concentration, 50 percentLD50: Lethal dose, 50 percentPBT: Persistent, Bioaccumulative and ToxicvPvB: very Persistent and very BioaccumulativeAcute Tox. 4: Acute toxicity – Category 4Skin Irrit. 2: Skin corrosion/irritation – Category 2Skin Corr. 3: Skin corrosion/irritation – Category 3Eye Irrit. 2A: Serious eye damage/eye irritation – Category 2ACarc. 2: Carcinogenicity – Category 2Repr. 2: Reproductive toxicity – Category 2STOT SE 3: Specific target organ toxicity (single exposure) – Category 3Aquatic Chronic 2: Hazardous to the aquatic environment - long-term aquatic hazard – Category 2

KOR

/6



45.0



· Trade name: PSB Diluent








· 2.1 Classification of the substance or mixture· Classification according to Regulation (EC) No 1272/2008 The product is not classified according to the CLP regulation.

· 2.2 Label elements· Labelling according to Regulation (EC) No 1272/2008 Void· Hazard pictograms Void· Signal word Void· Hazard statements Void· 2.3 Other hazards· Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.


· 3.2 Chemical characterisation: Mixtures· Description: Mixture of the substances listed below with nonhazardous additions.

· Dangerous components: Void· Additional information For the wording of the listed hazard phrases refer to section 16.


· 4.1 Description of first aid measures· After inhalation Supply fresh air; consult doctor in case of complaints.· After eye contact Rinse opened eye for several minutes under running water.· After swallowing Induce vomiting and call for medical help.


/6



Trade name: PSB Diluent

(Contd. of page 1)

45.0

· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.· 4.3 Indication of any immediate medical attention and special treatment neededNo further relevant information available.


· 5.1 Extinguishing media· Suitable extinguishing agents Use fire fighting measures that suit the environment.· 5.2 Special hazards arising from the substance or mixture No further relevant information available.· 5.3 Advice for firefighters· Protective equipment: No special measures required.


· 6.1 Personal precautions, protective equipment and emergency procedures Wear protective clothing.· 6.2 Environmental precautions: Dilute with plenty of water.· 6.3 Methods and material for containment and cleaning up:Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).

· 6.4 Reference to other sectionsSee Section 7 for information on safe handlingSee Section 8 for information on personal protection equipment.See Section 13 for disposal information.


· 7.1 Precautions for safe handling No special precautions are necessary if used correctly.· Information about protection against explosions and fires: No special measures required.

· 7.2 Conditions for safe storage, including any incompatibilities· Storage· Requirements to be met by storerooms and receptacles: According to product specification· Information about storage in one common storage facility: Not required.· Further information about storage conditions: None.· 7.3 Specific end use(s) No further relevant information available.



· 8.1 Control parameters· Components with limit values that require monitoring at the workplace:The product does not contain any relevant quantities of materials with critical values that have to be monitored at theworkplace.


· 8.2 Exposure controls· Personal protective equipment· General protective and hygienic measuresThe usual precautionary measures should be adhered to when handling chemicals.


/6




(Contd. of page 2)

45.0

· Breathing equipment: Not required.· Protection of hands: Protective gloves.· Material of gloves Synthetic gloves· Penetration time of glove materialThe exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.




Form: LiquidColour: Colourless


· pH-value at 20 °C: 6.5



· Flammability (solid, gaseous) Not applicable.

· Ignition temperature:

Decomposition temperature: Not determined.



· Explosion limits:Lower: Not determined.Upper: Not determined.

· Vapour pressure at 20 °C: 23 hPa

· Density: Not determined· Relative density Not determined.· Vapour density Not determined.· Evaporation rate Not determined.

· Solubility in / Miscibility withWater: Fully miscible


· Viscosity:dynamic: Not determined.kinematic: Not determined.

· Solvent content:Organic solvents: 0.0 %


/6




(Contd. of page 3)

45.0

Water: 95.0 %· 9.2 Other information No further relevant information available.




· 11.1 Information on toxicological effects· Acute toxicity Based on available data, the classification criteria are not met.· Primary irritant effect:· Skin corrosion/irritation Based on available data, the classification criteria are not met.· Serious eye damage/irritation Based on available data, the classification criteria are not met.· Respiratory or skin sensitisation Based on available data, the classification criteria are not met.· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)· Germ cell mutagenicity Based on available data, the classification criteria are not met.· Carcinogenicity Based on available data, the classification criteria are not met.· Reproductive toxicity Based on available data, the classification criteria are not met.· STOT-single exposure Based on available data, the classification criteria are not met.· STOT-repeated exposure Based on available data, the classification criteria are not met.· Aspiration hazard Based on available data, the classification criteria are not met.


· 12.1 Toxicity· Aquatic toxicity: No further relevant information available.· 12.2 Persistence and degradability No further relevant information available.· 12.3 Bioaccumulative potential No further relevant information available.· 12.4 Mobility in soil No further relevant information available.· Additional ecological information:· General notes: Generally not hazardous for water.· 12.5 Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.· 12.6 Other adverse effects No further relevant information available.

KOR

(Contd. on page 5)

/6




(Contd. of page 4)

45.0


· 13.1 Waste treatment methods· Recommendation Dispose of waste in accordance to applicable national, regional, or local regulations.



· 14.1 UN-Number· ADR, ADN, IMDG, IATA Void

· 14.2 UN proper shipping name· ADR, ADN, IMDG, IATA Void


· ADR, ADN, IMDG, IATA· Class Void

· 14.4 Packing group· ADR, IMDG, IATA Void

· 14.5 Environmental hazards: Not applicable.

· 14.6 Special precautions for user Not applicable.


· UN "Model Regulation": Void


· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture· Korean Existing Chemical Inventory7732-18-5 water KE-35400

· Directive 2012/18/EU· Named dangerous substances - ANNEX I None of the ingredients is listed.


· Water hazard class: Generally not hazardous for water.· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.



/6




(Contd. of page 5)

45.0



ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage ofDangerous Goods by Road)IMDG: International Maritime Code for Dangerous GoodsIATA: International Air Transport AssociationGHS: Globally Harmonised System of Classification and Labelling of ChemicalsEINECS: European Inventory of Existing Commercial Chemical SubstancesELINCS: European List of Notified Chemical SubstancesCAS: Chemical Abstracts Service (division of the American Chemical Society)PBT: Persistent, Bioaccumulative and ToxicvPvB: very Persistent and very Bioaccumulative

KOR

/6



45.0



· Trade name: Bacterial Suspension Buffer














· 3.2 Chemical characterisation: Mixtures· Description: Mixture of the substances listed below with nonhazardous additions.· Dangerous components:CAS: 7647-14-5EINECS: 231-598-3

sodium chloride Skin Irrit. 2, H315; Eye Irrit. 2A, H319 0.1-1.0%


/6



Trade name: Bacterial Suspension Buffer

(Contd. of page 1)

45.0



· 4.1 Description of first aid measures· General information No special measures required.· After inhalation Supply fresh air; consult doctor in case of complaints.· After skin contact Generally the product does not irritate the skin.· After eye contact Rinse opened eye for several minutes under running water.· After swallowing Induce vomiting and call for medical help.· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.· 4.3 Indication of any immediate medical attention and special treatment neededNo further relevant information available.


· 5.1 Extinguishing media· Suitable extinguishing agentsCO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

· 5.2 Special hazards arising from the substance or mixture No further relevant information available.· 5.3 Advice for firefighters· Protective equipment: No special measures required.


· 6.1 Personal precautions, protective equipment and emergency procedures Wear protective clothing.· 6.2 Environmental precautions: Dilute with plenty of water.· 6.3 Methods and material for containment and cleaning up:Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).

· 6.4 Reference to other sectionsNo dangerous substances are released.See Section 7 for information on safe handlingSee Section 8 for information on personal protection equipment.See Section 13 for disposal information.


· 7.1 Precautions for safe handling No special measures required.· Information about protection against explosions and fires: No special measures required.

· 7.2 Conditions for safe storage, including any incompatibilities· Storage· Requirements to be met by storerooms and receptacles: According to product specification· Information about storage in one common storage facility: Not required.· Further information about storage conditions: None.


/6




(Contd. of page 2)

45.0

· 7.3 Specific end use(s) No further relevant information available.










Form: FluidColour: Colourless


· pH-value at 20 °C: 7

· Change in conditionMelting point/freezing point: 0 °CInitial boiling point and boiling range: undetermined







· Explosion limits:Lower: Not determined.


/6




(Contd. of page 3)

45.0

Upper: Not determined.


· Density at 20 °C: 1.00791 g/cm³· Relative density Not determined.· Vapour density Not determined.· Evaporation rate Not determined.




· Solvent content:Organic solvents: 0.0 %Water: 97.5 %

Solids content: 2.5 %· 9.2 Other information No further relevant information available.




· 11.1 Information on toxicological effects· Acute toxicity Based on available data, the classification criteria are not met.· Primary irritant effect:· Skin corrosion/irritationCauses mild skin irritation.

· Serious eye damage/irritation Based on available data, the classification criteria are not met.· Respiratory or skin sensitisation Based on available data, the classification criteria are not met.· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)· Germ cell mutagenicity Based on available data, the classification criteria are not met.· Carcinogenicity Based on available data, the classification criteria are not met.· Reproductive toxicity Based on available data, the classification criteria are not met.· STOT-single exposure Based on available data, the classification criteria are not met.· STOT-repeated exposure Based on available data, the classification criteria are not met.


/6




(Contd. of page 4)

45.0

· Aspiration hazard Based on available data, the classification criteria are not met.


· 12.1 Toxicity· Aquatic toxicity: No further relevant information available.· 12.2 Persistence and degradability No further relevant information available.· 12.3 Bioaccumulative potential No further relevant information available.· 12.4 Mobility in soil No further relevant information available.· Additional ecological information:· General notes: Generally not hazardous for water.· 12.5 Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.· 12.6 Other adverse effects No further relevant information available.


· 13.1 Waste treatment methods· RecommendationHand over to hazardous waste disposers.Must not be disposed of together with household garbage. Do not allow product to reach sewage system.








· 14.5 Environmental hazards:· Marine pollutant: No




/6




(Contd. of page 5)

45.0

· Transport/Additional information: Not dangerous according to the above specifications.



· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture· Korean Existing Chemical Inventory7647-14-5 sodium chloride KE-313877558-79-4 disodium hydrogenorthophosphate KE-123447447-40-7 potassium chloride KE-290867778-77-0 potassium dihydrogenphosphate KE-286227732-18-5 water KE-35400


· Water hazard class: Generally not hazardous for water.· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.




ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage ofDangerous Goods by Road)IMDG: International Maritime Code for Dangerous GoodsIATA: International Air Transport AssociationGHS: Globally Harmonised System of Classification and Labelling of ChemicalsEINECS: European Inventory of Existing Commercial Chemical SubstancesELINCS: European List of Notified Chemical SubstancesCAS: Chemical Abstracts Service (division of the American Chemical Society)PBT: Persistent, Bioaccumulative and ToxicvPvB: very Persistent and very BioaccumulativeSkin Irrit. 2: Skin corrosion/irritation – Category 2Skin Corr. 3: Skin corrosion/irritation – Category 3Eye Irrit. 2A: Serious eye damage/eye irritation – Category 2A

KOR

/7



45.0



· Trade name: Lysozyme Solution














· 3.2 Chemical characterisation: Mixtures· Description: Mixture of the substances listed below with nonhazardous additions.· Dangerous components:CAS: 7732-18-5EINECS: 231-791-2

water 35-50%


/7



Trade name: Lysozyme Solution

(Contd. of page 1)

45.0

Ammonium Sulfate Acute Tox. 5, H303 35-50%CAS: 9001-63-2EINECS: 232-620-4

Lysozyme 2.5-5%

CAS: 7647-14-5EINECS: 231-598-3

sodium chloride Skin Irrit. 2, H315; Eye Irrit. 2A, H319 0.1-1.0%



· 4.1 Description of first aid measures· General information No special measures required.· After inhalation Supply fresh air; consult doctor in case of complaints.· After skin contact Generally the product does not irritate the skin.· After eye contact Rinse opened eye for several minutes under running water.· After swallowing Induce vomiting and call for medical help.· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.· 4.3 Indication of any immediate medical attention and special treatment neededNo further relevant information available.


· 5.1 Extinguishing media· Suitable extinguishing agentsCO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

· 5.2 Special hazards arising from the substance or mixture No further relevant information available.· 5.3 Advice for firefighters· Protective equipment: No special measures required.


· 6.1 Personal precautions, protective equipment and emergency procedures Wear protective clothing.· 6.2 Environmental precautions:Dilute with plenty of water.Do not allow to enter sewers/ surface or ground water.

· 6.3 Methods and material for containment and cleaning up:Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).

· 6.4 Reference to other sectionsNo dangerous substances are released.See Section 7 for information on safe handlingSee Section 8 for information on personal protection equipment.See Section 13 for disposal information.


· 7.1 Precautions for safe handling No special measures required.· Information about protection against explosions and fires: No special measures required.


/7




(Contd. of page 2)

45.0

· 7.2 Conditions for safe storage, including any incompatibilities· Storage· Requirements to be met by storerooms and receptacles: According to product specification· Information about storage in one common storage facility: Not required.· Further information about storage conditions: None.· 7.3 Specific end use(s) No further relevant information available.










Form: FluidColour: Colourless


· pH-value at 20 °C: 7







/7




(Contd. of page 3)

45.0



· Explosion limits:Lower: Not determined.Upper: Not determined.


· Density: Not determined· Relative density Not determined.· Vapour density Not determined.· Evaporation rate Not determined.




· Solvent content:Organic solvents: 0.0 %Water: 50.0 %

Solids content: 30.0 %· 9.2 Other information No further relevant information available.




· 11.1 Information on toxicological effects· Acute toxicity Based on available data, the classification criteria are not met.· LD/LC50 values that are relevant for classification:

Ammonium SulfateOral LD50 3000 mg/kg (rat)

· Primary irritant effect:· Skin corrosion/irritationCauses mild skin irritation.


/7




(Contd. of page 4)

45.0

· Serious eye damage/irritation Based on available data, the classification criteria are not met.· Respiratory or skin sensitisation Based on available data, the classification criteria are not met.· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)· Germ cell mutagenicity Based on available data, the classification criteria are not met.· Carcinogenicity Based on available data, the classification criteria are not met.· Reproductive toxicity Based on available data, the classification criteria are not met.· STOT-single exposure Based on available data, the classification criteria are not met.· STOT-repeated exposure Based on available data, the classification criteria are not met.· Aspiration hazard Based on available data, the classification criteria are not met.


· 12.1 Toxicity· Aquatic toxicity: No further relevant information available.· 12.2 Persistence and degradability No further relevant information available.· 12.3 Bioaccumulative potential No further relevant information available.· 12.4 Mobility in soil No further relevant information available.· Additional ecological information:· General notes:Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

· 12.5 Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.· 12.6 Other adverse effects No further relevant information available.


· 13.1 Waste treatment methods· RecommendationHand over to hazardous waste disposers.Must not be disposed of together with household garbage. Do not allow product to reach sewage system.








/7




(Contd. of page 5)

45.0


· 14.5 Environmental hazards:· Marine pollutant: No



· Transport/Additional information: Not dangerous according to the above specifications.



· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture· Korean Existing Chemical Inventory

Ammonium Sulfate KE-017439001-63-2 Lysozyme KE-226687647-14-5 sodium chloride KE-31387

77-86-1 Tris(hydroxymethyl)aminomethane KE-014037732-18-5 water KE-35400


· Water hazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.




ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage ofDangerous Goods by Road)IMDG: International Maritime Code for Dangerous GoodsIATA: International Air Transport AssociationGHS: Globally Harmonised System of Classification and Labelling of ChemicalsEINECS: European Inventory of Existing Commercial Chemical SubstancesELINCS: European List of Notified Chemical SubstancesCAS: Chemical Abstracts Service (division of the American Chemical Society)LC50: Lethal concentration, 50 percentLD50: Lethal dose, 50 percentPBT: Persistent, Bioaccumulative and Toxic


/7




(Contd. of page 6)

45.0

vPvB: very Persistent and very BioaccumulativeAcute Tox. 5: Acute toxicity – Category 5Skin Irrit. 2: Skin corrosion/irritation – Category 2Skin Corr. 3: Skin corrosion/irritation – Category 3Eye Irrit. 2A: Serious eye damage/eye irritation – Category 2A

KOR

product code description - bio-rad laboratories · product code description ... 10000048962 protein...

Documents