product catalogue - t-t pumps...potable / clean water pumps industrial / lubricant / fuel pumps pump...

www.ttpumps.com / T: +44 (0) 1630 647200

PRICE LIST

PRODUCT CATALOGUE

Effective from 1st March 2020

NOTES:1. The prices in this listing are correct at the time of printing, the latest prices are up-to-date on our website, ttpumps.com2. All prices in this listing are for single units unless otherwise stated3. All prices are in £ (Pound Sterling) and are subject to Value Added Tax (VAT) at current rates.

CONTENTS

013

014

0101 7 – 18

01206 – 211

0102 19 – 40

0103 41 – 58

0104 59 – 62

0105 63 – 84

0106 85 – 114

0107 115 – 132

0108 133 – 142

0109 143 – 172

0110 173 – 188

0111

12

189 – 205

DELIVERY

INTRODUCTION

DRAINAGE PUMPS

INDEX

SEWAGE PUMPS

CONTRACTORS PUMPS

ENGINE DRIVEN PUMPS

AGRICULTURAL & ENVIRONMENTAL FEATURING BIOGAS

POTABLE / CLEAN WATER PUMPS

INDUSTRIAL / LUBRICANT / FUEL PUMPS

PUMP ACCESSORIES

WATERWORKS VALVES

CONTROL SYSTEMS

PUMPING STATIONS

BUY ONLINE 5

2

3

UK & MAINLAND SCOTLAND

WEIGHT DELIVERY SLOT DELIVERY CHARGES

£15.00 FOR 20kg, THEN + £0.30 PER kg UP TO 100kg THEN IT GOES TO PALLET





20kg ≤

20kg ≤

20kg ≤

20kg ≤

20kg ≤

20kg – 100kg

20kg – 100kg

20kg – 100kg

20kg – 100kg

20kg – 100kg

STANDARD

PRE 9:30AM

PRE 10:30AM

PRE NOON

SATURDAY (not all areas covered for Saturday delivery)

STANDARD

PRE 9:30AM

PRE 10:30AM

PRE NOON

SATURDAY (not all areas covered for Saturday delivery)

£15.00

£45.00

£35.00

£30.00

£45 STANDARD / £55 PRE NOON

WEIGHT DELIVERY CHARGES

0kg – 250kg £70.00 (AM DELIVERY £90.00)

251kg – 500kg £85.00 (AM DELIVERY £105.00)

501kg – 1000kg £95.00 (AM DELIVERY £115.00)

OPTIONAL EXTRA FOR AM DELIVERY, WEIGHT CHARGE + £20.00

PALLET RATES

Please note our minimum order charge is £50.00 + VAT. This is AFTER any discount has been applied to the order and DOES NOT include carriage charges.

Price to be advised. Please contact T-T directly to discuss your needs.

DESTINATIONDELIVERY CHARGESDELIVERY BAND

ORDER OVER £50.00 FREE OF CHARGE

UK & MAINLAND SCOTLAND

ORDER OVER £50.00 DELIVERY EXTRA

ORDER OVER £50.00 DELIVERY EXTRA

MAINLAND EUROPE, WORLDWIDE

NORTHERN IRELAND / DUBLIN / EIRE / ISLE OF MAN / SCILLY / ISLE OF WIGHT / CHANNEL ISLANDS


£45.00 FOR 20kg,THEN £1.00 PER kg UP TO 100kg THEN IT GOES TO PALLET (P.O.A.)UP TO 100kg 5-7 DAY ONLY

SCOTTISH HIGHLANDS


£30.00 FOR 20kg,THEN £1.00 PER kg UP TO 100kg THEN IT GOES TO PALLET (SEE ABOVE)UP TO 100kg 2-3 DAY ONLY

DELIVERY

4

Welcome to our Product Catalogue and price list Edition 7, in this edition we have added many new product ranges and models to ensure we provide you with the very best selection of pumps, valves, controls and ancillary equipment. We have endeavoured to provide you with the latest product information, however we are continually updating our range, therefore our website is our most up-to-date source of information.

This guide is split into product sections from drainage pumps to controls to valves. Our technical information is presented in a table format which includes a quick delivery status reference:

INTRODUCTION

DELIVERY

SAME DAY DISPATCH

LEAD TIME APPLIES

ADDITIONAL INFORMATION REQUIRED / BESPOKE BUILT ITEM, CONTACT US FOR MORE INFORMATION

PLEASE NOTE

OUR WEBSITE IS OUR MOST UP-TO-DATE ACCURATE SOURCE OF INFORMATION...

www.ttpumps.com

Orders placed before 4pm* that display the green van icon will be dispatched same day

for next day delivery.

Items that display an amber icon have a lead time, a member of our team will be in

touch to discuss delivery time-scales.

* 4pm is the standard cut off time for the majority of same day dispatch products, some products do have an earlier cut off time, this is referenced on the individual product pages.

— Save an additional 5% off your order

— Use product codes in the catalogue to easily navigate

— Enquire & request quotations

— Special offers & bulk-buy promotions

— Download datasheets & technical information

— How To guides, videos & case studies

BUY ONLINE & TECHNICAL SUPPORT

SIGN UP FOR AN ACCOUNT

— Personalised dashboard set up for your requirements

— View orders & reorder easily

— Sign up to for our CPD programme, technical drawings and our newsletter

— Apply for a credit account

— All that you need in one place!

5

VISIT OUR WEBSITE

HERE ARE JUST SOME OF THE REASONS TO VISIT US ONLINE...

For assistance using our website please do not hesitate to contact our Marketing Team. T: +44 (0) 1630 647200 / [email protected]

6

NOTES

www.ttpumps.com / T: +44 (0) 1630 647200

SECTION 01 DRAINAGE PUMPS

mm inch

DISCHARGE

25

25

32

32

40

40

50

50

40

40

50

50

1

1

11/4

11/4

11/2

11/2

2

2

11/2

11/2

2

2

8

01 – DRAINAGE PUMPS

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

10

8

6

4

2

0 0 20 40 60 80 100 120 140

A

T-T 100The T-T 100 is a submersible drainage pump for clean water with non-abrasive particles (max. solid bodies: 9mm). It has a stainless steel body, suction grid, motor casing and pump shaft and is ideal for domestic and industrial applications.

Features:

– Stainless steel construction

– Technopolymer impeller

– Mechanical seal

– IP68 Motor

– Lipseal

– Submersion depth: max 5m

– Liquid temperature up to 35°C

– Automatic

OUTPUT

amp mm inchkW

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/min

CABLE m

PRICE £

WEIGHT kg

FREE PASSAGE

mm

PUMP TYPE

T-T 100 230V/1Ph PW/TT100 1607591106.5320.151A \ 11/4

DELIVERY STATUS

amp kW

OUTPUTCURVEPRODUCT CODE

MAXIMUM

HEAD m

CAPACITY l/min

CABLE m

PRICE £

WEIGHT kg

FREE PASSAGE

mm

PUMP TYPE

SUMPY 30 110V

SUMPY 30 230V

SUMPY 75 110V

SUMPY 75 230V

SUMPY 100 110V

SUMPY 100 230V

SUMPY 150 110V

SUMPY 150 230V

SUMPY 75 VORTEX 110V




PW/SUMPY30-2

PW/SUMPY30

PW/SUMPY75-2

PW/SUMPY75

PW/SUMPY100-2

PW/SUMPY100

PW/SUMPY150-2

PW/SUMPY150

PW/SUMPY75V-2

PW/SUMPY75V

PW/SUMPY150V-2

PW/SUMPY150V

125

125

150

150

175

175

185

185

185

185

195

195

3.9

3.9

5.2

5.2

6.5

6.5

6.8

6.8

6

6

7

7

5

5

5

5

5

5

5

5

5

5

5

5

5 x 4

5 x 4

12 x 5

12 x 5

12 x 5

12 x 5

10 x 5

10 x 5

40 x 15

40 x 15

40 x 25

40 x 25

100

100

175

175

210

210

260

260

200

200

245

245

5

5

8

8

9

9

11

11

8

8

10

10

0.12

0.11

0.22.4

0.21.2

0.374

0.371.9

0.686

0.682.9

0.372.4

0.371.2

0.686

0.682.9

DELIVERY STATUS

A \

A \

B \

B \

C \

C \

D \

D \

E \

E \

F \

F \

SUMPYThe Sumpy is a fully submersible, automatic sump pump for small water drainage applications. An integral float switch senses the rise and fall in water level and controls the pump automatically. The body and strainer are produced in technopolymer with a stainless steel shaft, fitted with a lipseal and a mechanical seal.

Features:

– Robust construction

– Submersion depth: max 5m


– IP68 motor

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

1211109876543210

0 20 40 60 80 100 120 140 160 180 200 220 240 260

A C DB E F

A

A

Same day dispatch. Lead time applies. www.ttpumps.com / T: +44 (0) 1630 647200 Please note: Our minimum order is £50. Please check our website for the most up-to-date prices and stock availability.

Stainless steel drainage pump for clean water containing solids up to 12mm. For draining rooms or emptying tanks.

Features:


– 0.25 – 0.75kW out power range

– Open multichannel impeller in 304 stainless steel

– 2 pole motor

– G 11/4” – G 11/2” vertical discharge

– 12mm max. free passage

– 16m max. head

– 335 l/min max. capacity

– Operating temperature 40ºC (can operate at 90°C for up to 3 minutes)

– Automatic as standard


DR STEEL

www.ttpumps.com / T: +44 (0) 1630 647200 Same day dispatch. Lead time applies. Please note: Our minimum order is £50. Please check our website for the most up-to-date prices and stock availability. 9

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

18

16

14

12

10

8

6

4

2

0 0 100 200 300 400

AB C D

A

A

The Samsump is a robust sump pump constructed in fibre-reinforced plastic, giving resistance to corrosion. It is ideal for permanent installation where reliable automatic operation is essential.

The compact size of the Samsump allows it to fit into a sump hole measuring 250mm x 250mm deep.

Features:

– Constructed of fibre-reinforced plastic

– Mechanical seal

– Lipseal

– 9mm solids handling

– 0.25kW output

– 40mm vertical discharge

SAMSUMPPERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

10

8

6

4

2

0 0 50 100 150 200

A

OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY lpm

CABLE m

PRICE £

WEIGHT* kg

FREE PASSAGE

mm

PUMP TYPE DELIVERY STATUS

DR STEEL 25 230V/1Ph PZ/DRSTEEL25/1 2505.95101208.5320.252.3A \ 11/4

DR STEEL 37 230V/1Ph PZ/DRSTEEL37/1 2706.351016013320.373.1B \ 11/4

DR STEEL 55 230V/1Ph PZ/DRSTEEL55/1 3407.751230013400.554.3C \ 11/2

DR STEEL 75 230V/1Ph PZ/DRSTEEL75/1 3708.451234016400.755.6D \ 11/2

DR STEEL 75 400V/1Ph PZ/DRSTEEL75T/3 3908.451234016400.752.4D \ 11/2

230V models available with a Z Float @ £40. *Cable weight not included.

OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY lpm

CABLE m

PRICE £

WEIGHT kg

FREE PASSAGE

mm


SAMPSUMP 230V/1Ph PH/SAMSUMP 15041091807.5400.251.3A \ 11/2

SAMPSUMP 230V/1Ph* PH/SAMSUMP/F 16541091807.5400.251.3A \ 11/2

*Automatic version with Z Float.

10


The Goliath Super® is a robust sump pump made of stainless steel plate and fibre-reinforced plastic, resistant to corrosion. It also features a vortex impeller giving up to 35mm solids handling. Maximum depth of submersion is 10m, minimum sump 250mm x 250mm.

Features:

– Stainless steel casing & reinforced plastic construction (150, 250 & 400), cast iron volute and impeller (550 & 750)

– Double mechanical seal

– Interchangeable horizontal and vertical discharge

– Built in air relief valve on all models

– Most of the models available with the float switches as illustrated

A

OUTPUTOPERATION

mm inchkW

PRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/min

CABLE m

WEIGHT kg

FREE PASSAGE

mm


CURVE

GOLIATH SUPER 150 230V/1Ph PM/GOLIATHS1/1-A A FLOAT

A FLOAT

F FLOAT

F FLOAT

Z FLOAT

Z FLOAT

A FLOAT

Z FLOAT

F FLOAT

A FLOAT

A FLOAT

A FLOAT

A FLOAT

MANUAL

MANUAL

MANUAL

85302506.3500.15 2A \

GOLIATH SUPER 150 110V/1Ph PM/GOLIATHS1/2-A 85302506.3500.15 2A \

GOLIATH SUPER 150 230V/1Ph PM/GOLIATHS1/1-F 85302506.3500.15 2A \

GOLIATH SUPER 150 110V/1Ph PM/GOLIATHS1/2-F 85302506.3500.15 2A \

GOLIATH SUPER 150 230V/1Ph PM/GOLIATHS1/1-Z 85302506.3500.15 2A \

GOLIATH SUPER 150 110V/1Ph PM/GOLIATHS1/2-Z 85302506.3500.15 2A \

GOLIATH SUPER 250 230V PM/GOLIATHS2/1-A 8.55303007.5500.25 2B \

GOLIATH SUPER 250 230V PM/GOLIATHS2/1-Z 8.55303007.5500.25 2B \

GOLIATH SUPER 250 230V








PM/GOLIATHS2/1-F

PM/GOLIATH2/2-A

PM/GOLIATH3/1-A

PM/GOLIATH4/1-A

PM/GOLIATH5/1-A

PM/GOLIATH1/1

PM/GOLIATHS1/2

PM/GOLIATH2/1

PRICE £

240

240

240

240

260

260

290

310

290

290

340

380

420

240

240

290

8.5

8.5

9.3

15.8

17.8

8

8

8.5

5

5

5

5

5

5

5

5

30

30

35

35

35

30

30

30

300

300

366

433

500

250

250

360

7.5

7.5

9.2

10

11.5

6.3

6.3

7.5

50

50

50

50

50

50

50

50

0.25

0.25

0.4

0.55

0.75

0.15

0.15

0.25

2

2

2

2

2

2

2

2

B \

B \

C \

D \

E \

A \

A \

A \

10m cables available on request at an additional cost.

1.7

3

1.7

3

1.7

3

2.5

2.5

2.5

4.5

3.2

3.6

6.6

1.6

2.8

2

amp

A FLOAT F FLOAT Z FLOAT

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

12

10

8

6

4

2

0 0 100 200 300 400 500

A B

CD E

MANUAL

MANUAL

MANUAL




PM/GOLIATH3/2

PM/GOLIATH4/2

PM/GOLIATH5/2

340

380

420

9.8

16.3

18.3

5

5

5

35

35

35

366

433

500

9.2

10

11.5

50

50

50

0.4

0.55

0.75

2

2

2

C \

D \

E \

1.4

1.6

2.5

AUTO

MAT

ICM

ANUA

L



DR BLUE PROFESSIONAL

11

PERFORMANCE DATA

HEA

D / m

Q / m3/h

20

15

10

5

0 0 5 10 15 20 25 30 35 40 45 50

A

C D

OUTPUT

mm inchkW

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY m3/h

CABLE m

PRICE £

WEIGHT** kg

FREE PASSAGE

mm

PUMP TYPE

DR BLUE PRO 50/2/G32V 230V/1Ph*

DR BLUE PRO 50/2/G32V 400V/3Ph











PZ/1094.005

PZ/1096.004

PZ/1098.011

PZ/1098.005

PZ/1100.004

PZ/1090.005

PZ/1092.004

PZ/1106.006

PZ/1106.005

PZ/1107.002

PZ/1108.004

PZ/1109.002

340

340

350

360

360

455

455

530

550

550

650

650

12

12

13.5

13.5

13.5

14

14

23

23

23

23

23

10

10

10

10

10

10

10

10

10

10

10

10

15

15

15

15

15

15

15

30 x 10

30 x 10

30 x 10

30 x 10

30 x 10

16.5

16.5

16.9

16.9

16.9

18.3

18.3

37

37

37

41.5

41.5

8.4

8.4

11.8

11.8

11.8

14.1

14.1

13.5

13.5

13.5

16.2

16.2

32

32

32

32

32

32

32

50

50

50

50

50

0.372.8

0.371.1

0.558.6

0.554.1

0.551.6

0.745.6

0.742.2

1.11.5

1.17.5

1.13.2

1.510

1.54.3

A \

A \

B \

B \

B \

C \

C \

D \

D \

D \

E \

E \

11/4

11/4

11/4

11/4

11/4

11/4

11/4

2

2

2

2

2

DELIVERY STATUS

amp

A

Designed for domestic and professional use, the DR Blue Pro range of submersible pumps have an open multi-channel impeller for most clear or slightly soiled wastewater.

Features:

– Cast iron construction and impeller

– Double mechanical seal within oil bath

– Automatic as standard, floats removed on request

– Other models available in 110V by request

– Auto-coupling available on request

B

E

**Cable weight not included.*Extended cable is not available on these pump models. Ten metre cable will be supplied as standard, any extension of the cable should be done by a qualified electrician.

www.ttpumps.com / T: +44 (0) 1630 647200 Same day dispatch. Lead time applies. Please note: Our minimum order is £50. Please check our website for the most up-to-date prices and stock availability.

OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

CABLE m

PRICE £

WEIGHT* kg

FREE PASSAGE

mm

PUMP TYPE

DRB 50/2/G32V 230V/1Ph

DRB 50/2/G32V 400V/3Ph

DRB 75/2/G32V 230V/1Ph

DRB 75/2/G32V 400V/3Ph

DRB 100/2/G50V 230V/1Ph

DRB 100/2/G50V 400V/3Ph

DRB 150/2/G50V 230V/1Ph

DRB 150/2/G50V 400V/3Ph

DRB 200/2/G50V 230V/1Ph

DRB 200/2/G50V 400V/3Ph

PZ/DRB50/2/1

PZ/DRB50/2/3

PZ/DRB75/2/1

PZ/DRB75/2/3

PZ/DRB100/2/1

PZ/DRB100/2/3

PZ/DRB150/2/1

PZ/DRB150/2/3

PZ/DRB200/2/1

PZ/DRB200/2/3

1390

1390

1740

1740

2250

2250

2460

2460

2680

2680

17

17

17

17

21

21

23

23

23

23

10

10

10

10

10

10

10

10

10

10

15

15

15

15

15

15

15

15

15

15

4.4

4.4

6

6

9.5

9.5

11.8

11.8

12.5

12.5

8.3

8.3

11.8

11.8

11.8

11.8

15.5

15.5

17.5

17.5

32

32

32

32

50

50

50

50

50

50

0.372.9

0.371.1

0.553.9

0.551.4

0.886.5

0.882.3

1.18.2

1.12.7

1.59.3

1.53.6

A \A \B \B \C \C \D \D \E \E \

11/4

11/4

11/4

11/4

2

2

2

2

2

2

DELIVERY STATUS

*Cable weight not included.

OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

CABLE m

PRICE £

WEIGHT* kg

FREE PASSAGE

mm

PUMP TYPE

DRO 50/2/G32V 230V/1Ph

DRO 50/2/G32V 400V/3Ph

DRO 75/2/G32V 230V/1Ph

DRO 75/2/G32V 400V/3Ph

DRO 100/2/G50H 230V/1Ph

DRO 100/2/G50H 400V/3Ph

DRO 150/2/G50H 230V/1Ph

DRO 150/2/G50H 400V/3Ph

DRO 200/2/G50H 230V/1Ph

DRO 200/2/G50H 400V/3Ph

PZ/DRO50/2/1

PZ/DRO50/2/3

PZ/DRO75/2/1

PZ/DR75/2/3

PZ/0021.002

PZ/0022.002

PZ/0025.002

PZ/0026.002

PZ/0029.002

PZ/0030.003

480

480

570

570

750

750

810

810

860

860

15

15

15.5

15.5

19.5

19.5

20.5

20.5

21.5

21.5

10

10

10

10

10

10

10

10

10

10

15

15

15

15

15

15

15

15

15

15

4.5

4.5

6

6

9.4

9.4

12

12

13

13

8.5

8.5

12.1

12.1

12.0

12.0

15.8

15.8

17.8

17.8

32

32

32

32

50

50

50

50

50

50

0.372.9

0.371.1

0.553.9

0.551.4

0.96.5

0.92.3

1.18.2

1.12.7

1.59.3

1.53.6

A \A \B \B \C \C \D \D \E \E \

11/4

11/4

11/4

11/4

2

2

2

2

2

2

DELIVERY STATUS

The DRB range of small drainage pumps is ideal for heavy-duty use. These pumps are constructed in B-10 Bronze (for use with chemically aggressive liquids), and incorporate heavy-duty bearings and a double silicon carbide mechanical seal (+ viton gaskets).

Features:

– Bronze construction


– Automatic version available on request

– Auto-coupling available (GSL-250 cast iron only)

DRB BRONZEPERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

18

16

14

12

10

8

6

4

2

0 0 2 4 6 8 10 12

A B

DE

C

B


12


DRO RANGEPERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

20

18

16

14

12

10

8

6

4

2

0 0 2 4 6 8 10 12 14

A BC

DE

The DRO range of small drainage pumps are ideal for domestic and industrial use, the pumps feature a cast iron construction, heavy-duty bearings and a double silicon carbide mechanical seal, within an oil bath.

Features:

– Cast iron construction


– Vertical discharge on 50 & 75 and horizontal discharge on 100, 150 & 200 models

– Auto-coupling available

– Threaded flange on horizontal discharge models

B

VERT

ICAL

HORI

ZON

TAL


The DRX range of small drainage pumps are ideal for heavy-duty use. The pumps are constructed in AISI 316 cast stainless steel (for use with chemically aggressive liquids), and feature heavy-duty bearings and a double silicon carbide mechanical seal (+ viton gaskets).

Features:

– AISI 316 cast stainless steel construction


– Automatic version available on request (on single phase versions only)

– Auto-coupling available (GSL-250 cast iron only)


13

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

18

16

14

12

10

8

6

4

2

0 0 2 4 6 8 10 12

A B

DE

C

OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

CABLE m

PRICE £

WEIGHT* kg

FREE PASSAGE

mm

PUMP TYPE

DRX 50/2/G32V 230V/1Ph

DRX 50/2/G32V 400V/3Ph

DRX 75/2/G32V 230V/1Ph

DRX 75/2/G32V 400V/3Ph

DRX 100/2/G50V 230V/1Ph

DRX 100/2/G50V 400V/3Ph

DRX 150/2/G50V 230V/1Ph

DRX 150/2/G50V 400V/3Ph

DRX 200/2/G50V 230V/1Ph

DRX 200/2/G50V 400V/3Ph

PZ/0045.002

PZ/0046.001

PZ/0047.002

PZ/0048.001

PZ/0049.003

PZ/0049.001

PZ/0051.003

PZ/0052.001

PZ/0053.003

PZ/0054.001

1650

1650

2050

2050

2560

2560

2900

2900

3100

3100

17

17

17

17

21

21

23

23

23

23

10

10

10

10

10

10

10

10

10

10

15

15

15

15

15

15

15

15

15

15

4.4

4.4

6

6

9.5

9.5

11.8

11.8

12.5

12.5

8.2

8.2

11.7

11.7

11.7

11.7

15.3

15.3

17.3

17.3

32

32

32

32

50

50

50

50

50

50

0.372.9

0.371.1

0.553.9

0.551.4

0.886.5

0.882.3

1.18.2

1.12.7

1.59.3

1.53.6

A \A \B \B \C \C \D \D \E \E \

11/4

11/4

11/4

11/4

2

2

2

2

2

2

DELIVERY STATUS

DRX STAINLESS STEEL B



14


DRG RANGEThe DRG features a channel impeller and redesigned hydraulics and motors to guarantee high performance, low consumption and outstanding versatility.

These pumps are suitable for recirculation of industrial and process waters and civil lifting.

Features:

– Channel impeller

– Large free passage

OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

CABLE m

ATEX*Standard

OrOption

PRICE £

WEIGHT kg

FREE PASSAGE

mm


DRG 250/2/65 B0AT PZ/1760.001 16003410O35 x 302216.7651.83.7

A \

21/2

DRG 300/2/65 A0ET PZ/1431.003 185044.210O40 x 352417.9652.24.62

A \

21/2

DRG 400/2/65 A0ET PZ/1433.002 20504710O40 x 352722.86536.4

A \

21/2

DRG 250/2/80 L0AT PZ/1759.001 17003610O35 x 302517801.83.7

A \

3

DRG 300/2/80 E0ET PZ/1457.003 19504510O40 x 352518.4802.24.6

A \

3

DRG 400/2/80 E0ET PZ/1458.003 21504610O40 x 352823.58036.4

A \

3

DRG 550/2/80 P0FT PZ/1540.002 29006310O40 x 3530258047.7 3

DRG 550/2/80 B0FT PZ/1503.002 29006810O55 x 503618.68047.7 3

DRG 750/2/80 A0FT PZ/1501.003 38007110O404125.1805.510.8 3

DRG 750/2/80 B0FT PZ/1505.003 39007110O55 x 504021.9805.510.8 3

DRG 1000/2/80 A0FT PZ/1502.002 460079.210O404534.9807.513.7 3

DRG 1000/2/80 B0FT PZ/1504.002 460079.210O55 x 5048.728.8807.513.7 3

DRG 200/4/80 M0ET PZ/1471.002 195055.210O4525.88.2801.53.4 3

DRG 300/4/80 G0ET PZ/1463.002 235060.210O7532.312.1802.25.2 3

DRG 400/4/80 H0ET PZ/1466.002 245061.810O7534.813.98036.7 3

DRG 550/4/80 D0FT PZ/1523.002 340011010O65 x 6052.412.68048.4 3

DRG 750/4/80 D0FT PZ/1524.002 470011010O65 x 6059.216.9805.511.9

A \

3

DRG 200/4/100 T0ET PZ/1472.002 205058.210O4530.38.31001.53.4

A \

4

DRG 300/4/100 U0ET PZ/1468.002 245063.210O6038.19.51002.25.2

A \

4

DRG 400/4/100 U0ET PZ/1469.002 255064.810O6041.311.310036.7

A \

4

DRG 550/4/100 R0FT PZ/1521.002 37009010O6563.113.110048.4

A \

4DRG 1200/2/80 A0GT PZ/1900.003 530010410O4046.339.280916.1

A \

3

A \

A \

A \

A \A \

A \

A \

A \

A \

A \

B

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

50

40

30

20

10

0 0 20 40 60 80 100 120 140 160 180 200

DRG 75/2/G40V A3AM PZ/1793.200DRG 75/2/G40V A3AT PZ/1792.200

DRG 100/2/G40V A3AM PZ/1795.200

DRG 100/2/G40V A3AT PZ/1794.200

DRG 150/2/G50V A3AM PZ/1801.200DRG 150/2/G50V A3AT PZ/1800.200

DRG 200/2/G50V A3AM PZ/1803.200

DRG 200/2/G50V A3AT PZ/1802.200

DRG 75/2/G40H A3AM PZ/1797.200

DRG 75/2/G40H A3AT PZ/1796.200

DRG 100/2/G40H A3AM PZ/1799.200

DRG 100/2/G40H A3AT PZ/1798.200DRG 150/2/G50H A3AM PZ/1805.200

DRG 150/2/G50H A3AT PZ/1804.200

DRG 200/2/G50H A3AM PZ/1807.200

DRG 200/2/G50H A3AT PZ/1806.200

A \A \A \A \

A \A \A \A \A \A \A \A \A \A \A \A \

400.554.2400.551.4

400.754.9

400.751.7

501.16.6

501.12.4

501.59.3

501.53.3

400.554.2

400.551.4

400.754.9

400.751.7501.16.6

501.12.4

501.59.3

501.53.3

S15 x105.510.211/2

S15 x10610.211/2

S15 x106.913.311/2

S15 x106.913.311/2

S15 x108.5132

S15 x1011132

S15 x101016.52

S15 x1012.516.42

S15 x105.69.811/2

S15 x106.29.811/2

S15 x10712.711/2

S15 x108.112.711/2

S15 x108.112.92

S15 x1011.312.92

S15 x109.616.62

S15 x101316.62

1300241013002410

14002510

14002510

160026.510

160026.510

17002710

17002710

14002510

14002510

15002610

15002610170027.510

170027.510

1800281018002810

Many models are available with ATEX rated motors, please enquire with our sales department for more information.

VERT

ICAL

2 PO

LE

40m

m

VERT

ICAL

2 PO

LE

50m

m

HORI

ZON

TAL

2 PO

LE

40m

m

HORI

ZON

TAL

2 PO

LE

50m

m

H***

2

POLE

65

mm

HORI

ZON

TAL

2 PO

LE

80m

m

HORI

ZON

TAL

4 PO

LE

80m

m

H***

4

POLE

10

0mm

HORI

ZON

TAL

2 PO

LE

80m

m

A \

A \A \

A \A \

DRG 1200/2/80 B0GT PZ/1902.003 500010410O55 x 5050.732.180916.1 3

DRG 1500/2/80 A0GT PZ/1901.003 570010510O4044.441.7801119.5 3DRG 1500/2/80 B0GT PZ/1903.003 540010510O55 x 5047.636.4801119.5 3

DRG 2000/2/80 G0HT PZ/1677.002 610015510O7545.839.3801526.2 3

DRG 2500/2/80 G0HT PZ/1678.003 860016510O755043.98018.532.9 3

*ATEX key: S = ATEX as standard O = ATEX version additional option.***V = Vertical, H = Horizontal.


DRG 2000/4/100 B0HT PZ/1675.001 810021210O8010119.81001530.8A \ 4

DRG 1200/4/150 A0HT PZ/1660.001 780021210O80121.612.5150917A \ 6

DRG 1500/4/150 A0HT PZ/1661.001 870021210O80122.716.21501120.5A \ 6

DRG 2000/4/150 A0HT PZ/1662.001 960022410O80142.522.91501530.8A \ 6

DRG 1200/4/200 B0HT PZ/1666.001 890023910O80164.811.0200917A \ 8

DRG 1500/4/200 B0HT PZ/1667.001 940023910O80168.913.02001120.5A \ 8

DRG 2000/4/200 B0HT PZ/1669.001 1050025110O80173.717.22001530.8A \ 8

DRG 1200/4/250 H0HT PZ/1671.001 1020027010O80181.110.5250917A \ 10

DRG 1500/4/250 H0HT PZ/1672.001 1040027010O80186.412.32501120.5A \ 10

DRG 2000/4/250 H0HT PZ/1673.001 1150028210O80205.316.22501530.8A \ 10

DRG 1000/6/200 A0HT PZ/1663.001 1090027610O100 x 70143.411.02007.515.7A \ 8DRG 1000/6/200 B0HT PZ/1670.001 1000023910O80139.812.92007.515.7A \ 8DRG 1750/6/200 A0HT PZ/1664.001 1190029310O100 x 70176.315.72001327.6A \ 8DRG 1000/6/250 C0HT PZ/1665.001 1100030210O100 x 7014410.52507.515.7A \ 10DRG 1000/6/250 H0HT PZ/1674.001 1050027010O80149.711.92507.515.7A \ 10

DRG 1750/6/250 C0HT PZ/1668.001 1250031910O100 x 70192.114.92501327.6A \ 10

OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

CABLE m

ATEX*Standard

OrOption

PRICE £

WEIGHT kg

FREE PASSAGE

mm


A \A \A \A \A \

DRG 1000/4/80 D0GT PZ/1904.003 530014110O65 x 6053.820.8807.515.8 3

DRG 1200/4/80 D0HT PZ/1676.001 680018310O65 x 6055.922.980917 3

DRG 1200/4/100 H0HT PZ/1657.003 700019510O8080.119.2100917 4

DRG 1500/4/100 A0HT PZ/1658.001 790020010O8085.917.51001120.5 4

DRG 2000/4/100 A0HT PZ/1659.001 810021210O8090.325.41001530.8 4


HORI

ZON

TAL

4 PO

LE 8

0-25

0 m

m

HORI

ZON

TAL

6 PO

LE 2

00-2

50 m

m

15



DRY RANGEThe DRY range of large, AISI 316 stainless steel drainage pumps feature open twin-channel impellers, triple mechanical seals within an oil bath and an oil-filled motor. These pumps are specifically designed for use with chemically aggressive liquids.

Features:


– Triple mechanical seal (with viton gaskets) within oil bath

– Auto-coupling available in AISI 316 & GSL-250 cast iron

OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

CABLE m

PRICE £

WEIGHT* kg

FREE PASSAGE

mm

PUMP TYPE

DRY 300/2/80H 400V/3Ph

DRY 400/2/80H 400V/3Ph

DRY 550/2/80H 400V/3Ph

DRY 750/2/80H 400V/3Ph

DRY 1000/2/80H 400V/3Ph

DRY 1500/2/80H 400V/3Ph

DRY 1000/2/100H 400V/3Ph

DRY 1500/2/100H 400V/3Ph

PZ/0101.001

PZ/0103.001

PZ/0104.001

PZ/0105.001

PZ/0106.001

PZ/0108.001

PZ/0107.001

PZ/0109.001

7700

9200

10400

14300

15800

21000

17500

22500

51

65

62

104

110

130

115

144

10

10

10

10

10

10

10

10

56

56

56

63

65

60

80

80

28.7

32.3

36.4

42.8

50.1

58.7

61.5

72.8

13.5

15.7

17.2

21.4

27.8

38.3

22.3

31.1

80

80

80

80

80

80

100

100

2.76

3.68

4.910.1

7.214.5

1019.8

1528.2

1019.8

1528.2

A \

B \

C \

D \

E \

F \

G \

H \

3

3

3

3

3

3

4

4

DELIVERY STATUS

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

40

35

30

25

20

15

10

5

0 0 10 20 30 40 50 60 70 80

A B D E

F H

GC

B


16



The AP Blue Pro range of submersible pumps with high-head cast iron impeller is ideal for clean water, rainwater, and seepage water and for sandy / muddy water containing particles, no larger than 6mm, in suspension. These pumps are specifically designed for domestic and professional use.

Features:

– Cast iron construction & impeller




– Threaded flange

AP BLUE PROFESSIONALPERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

30

25

20

15

10

5

0 0 1 2 3 4 5 6 7 8 9

A B

C

OUTPUT

kWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

CABLE m

PRICE £

WEIGHT** kg

FREE PASSAGE

mm

PUMP TYPE

AP BLUE PRO 100/2/G40H 230V/1Ph*

AP BLUE PRO 100/2/G40H 400V/3Ph

AP BLUE PRO 150/2/G40H 230V/1Ph*




PZ/1110.002

PZ/1111.001

PZ/1112.002

PZ/1113.001

PZ/1114.002

PZ/1115.001

600

600

700

700

820

820

19

19

24

24

25

25

10

10

10

10

10

10

6

6

6

6

6

6

6.2

6.2

6.8

6.8

7.1

7.1

16.9

16.9

20.4

20.4

26.1

26.1

mm

40

40

40

40

40

40

0.745.5

0.742.7

1.17.5

1.13.2

1.510

1.54.3

A \

A \

B \

B \

C \

C \

inch

11/2

11/2

11/2

11/2

11/2

11/2

DELIVERY STATUS

B


17



Same day dispatch. Lead time applies. www.ttpumps.com / T: +44 (0) 1630 647200 Please note: Our minimum order is £50. Please check our website for the most up-to-date prices and stock availability.18


APG RANGEThese ranges offer a series of pumps with high-head open multi-channel impellers for clean water, rainwater and seepage water containing small particles in suspension, suitable for heavy duty professional use.

APG pumps have double mechanical seals.

Features:


– APG – Double mechanical seal within oil bath


– Base required for free standing

– Threaded flange

B

OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

CABLE m

PRICE £

WEIGHT** kg

FREE PASSAGE

mm

PUMP TYPE

APG 250/2/G40H 400V/3Ph

APG 300/2/G50H 400V/3Ph

APG 400/2/G50H 400V/3Ph

APG 550/2/G50H 400V/3Ph

APG 750/2/G50H 400V/3Ph

APG 150/2/G40H 400V/3Ph

APG 1000/2/G50H 400V/3Ph

AGP200/2/G40H 400V/3Ph

PZ/1758.001

PZ/1464.002

PZ/1473.002

PZ/1525.200

PZ/1508.200

PZ/1774.200

PZ/1509.200

PZ/1773.200

1700

2000

2300

2900

3800

1600

4700

1700

32

43.2

46

57.6

60.3

31.5

68.2

32

10

10

10

10

10

10

10

10

10 O

8 O

8 O

8 O

10

7

O

S

10

7

O

S

7.2

6.9

6.4

8.2

10.3

6.1

10.5

6.6

26

28.7

31.7

37.9

44.7

18.1

51.9

22.2

40

50

50

50

50

40

50

40

1.83.7

2.24.6

3.06.4

4.07.7

5.5

1.1

10.8

2.4

7.5

1.5

13.7

3.3

A \

B \

C \

D \

E \

G \

F \

H \

11/2

2

2

2

2

11/2

2

11/2

DELIVERY STATUS

**Cable weight not included.

ATEX*Standard

OrOption

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

60

50

40

30

20

10

0 0 2 4 6 8 10 12 14

A B

E F

C

DG

H



www.ttpumps.com / T: +44 (0) 1630 647200

SECTION 02 SEWAGE PUMPS

20

02 – SEWAGE PUMPS

Stainless steel pump with vortex impeller for clean or slightly dirty water, containing solids up to 40mm grain size.

Features:


– Vortex impeller in 304 stainless steel

– Operating temperature 40ºC (can operate at 90°C for up to 3 minutes)

– Automatic as standard

230V models available with a Z Float @ £40. *Cable weight not included.

OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/min

CABLE m

PRICE £

WEIGHT* kg

FREE PASSAGE

mm


DG STEEL 37 230V/1Ph PZ/DGSTEEL37/1 3006.65251858.1320.373.1A \ 11/4

DG STEEL 55 230V/1Ph PZ/DGSTEEL55/1 3808.15403308400.554.3B \ 11/2

DG STEEL 75 230V/1Ph PZ/DGSTEEL75/1 4108.95403809.6400.755.6C \ 11/2

DG STEEL 75 400V/1Ph PZ/DGSTEEL75T/3 4308.95403809.6400.752.4C \ 11/2

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

12

10

8

6

4

2

0 0 100 200 300 400

A B C

ADG STEEL

DG STEEL Z FLOAT


02 – SEWAGE PUMPS

21

CURVE CABLE* m

PRICE £

WEIGHT** kg

FREE PASSAGE

mm

DELIVERY STATUS

OUTPUT

amp mm inchkW

DISCHARGEPRODUCT CODE

PUMP TYPE

3901310406.5 5.2A \ 400.372.8 11/2

3901310406.5 5.2A \ 400.371.1 11/2

4001510409.5 6.8B \ 400.558.3 11/2

4101510409.5 6.8B \ 400.554.1 11/2

4101510409.5 6.8B \ 400.551.6 11/2

51015.5104011 7.5C \ 400.745.6 11/2

51015.5104011 7.5C \ 400.742.2 11/2

58523105011.6 11D \ 501.115.1 2

60023105011.6 11D \ 501.17.5 2

60023105011.6 11D \ 501.13.2 2

68024105014.6 11.5E \ 501.510.0 2

68024105014.6 11.5E \ 501.54.3 2

DG BLUE PRO 50/2/G40V 230V/1Ph PZ/1082.005












DG BLUE PROFESSIONALDesigned for domestic and professional use, the DG Blue Pro range of sewage pumps are suitable for pumping water polluted with suspended solid particles.

The cast iron Vortex impeller gives great performance in terms of flow rate and head, including integral free passage of up to 50mm.

Features:

– Cast iron construction & impeller



– Other models available in 110V by request

– Auto-coupling available on request

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

15

10

5

0 0 2 4 6 8 10 12

A B C D

E

A

MAXIMUM

HEAD m

CAPACITY l/sec



22

02 – SEWAGE PUMPS

DGO RANGESHeavy-duty, cast iron submersibles, fitted with Vortex impeller to allow good free passage and suitable for heavy polluted liquids, sewage and liquids containing fibrous material.

Features:




– 50mm flanged and 50mm BSP threaded discharge, 80mm flanged discharge only

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

18

16

14

12

10

8

6

4

2

0 0 2 4 6 8 10 12 14 16 18 20 22

A B CD E F

G

B

CURVEPRODUCT CODE

CABLE m

PRICE £

WEIGHT* kg

FREE PASSAGE

mm


OUTPUT

amp mm inchkW

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

DGO 50/2/G50H 230V/1Ph°^ PZ/0970.011 42016.51040A \ 500.372.9 2 6.3 6

DGO 50/2/G50H 400V/3Ph^ PZ/0971.004 42016.51040A \ 500.371.1 2 6.3 6

DGO 75/2/G50H 230V/1Ph°^ PZ/0970.012 49016.51040B \ 500.553.9 2 9 7.2

DGO 75/2/G50H 400V/3Ph^ PZ/0973.007 49016.51040B \ 500.551.4 2 9 7.2

DGO 100/2/G50H 230V/1Ph°^ PZ/DGO100H/2/1 71019.51050D \ 500.886.5 2 12.7 9.5

DGO 100/2/G50H 400V/3Ph^ PZ/DGO100H/2/3 71019.51050D \ 500.882.3 2 12.7 9.5

DGO 150/2/G50H 230V/1Ph° PZ/DGO150H/2/1 81020.51050E \ 501.18.2 2 14.3 10.5

DGO 150/2/G50H 400V/3Ph^ PZ/DGO150H/2/3 81020.51050E \ 501.12.5 2 14.3 10.5

DGO 200/2/G50H 230V/1Ph^ PZ/DGO200M/1 86021.51050F \ 501.59.3 2 15.1 11

DGO 200/2/G50H 400V/3Ph^ PZ/DGO200T/3 86021.51050F \ 501.53.6 2 15.1 11

DGO 100/4/G50H 230V/1Ph**° PZ/DGO100H/4/1 780191045C \ 500.75.7 2 5.2 8.5

780

980

980

2.2

11.2

3.9

DGO 100/4/G50H 400V/3Ph** PZ/0482.007 191045C \ 500.7 2 5.2 8.5

DGO 200/2/80H 230V/1Ph^ PZ/DGO200/80/1 231080G \ 801.7 3 8.4 16

DGO 200/2/80H 400V/3Ph^ PZ/DGO200/80/3 231080G \ 801.7 3 8.4 16

Does not come automatic as standard. For Automatic models add £25 – PZS/ZENIT-FLOAT. °Zenit Float.^2-Pole motor. **4-Pole motor.*Cable weight not included.


02 – SEWAGE PUMPS

23

CURVEPRODUCT CODE

CABLE m

PRICE £

WEIGHT* kg

FREE PASSAGE

mm


OUTPUT

amp mm inchkW

DISCHARGE

DGX STAINLESS STEEL RANGEDesigned for domestic and professional use, the DGX range of sewage pumps is suitable for treatment of water, polluted with suspended solid particles and provides excellent corrosion resistance.

The stainless steel Vortex impeller gives a great performance in terms of flow rate and head, including integral free passage of up to 38mm.

Features:




– 0.37 – 1.5kW output

– 50mm vertical discharge

B

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

16

14

12

10

8

6

4

2

0 0 2 4 6 8 10 12

A B C DE

DGX 50/2/G50V 230V/1Ph PZ/0188.001 1780181038A \ 500.372.9 2 7 6

DGX 50/2/G50V 400V/3Ph PZ/0189.001 1780181038A \ 500.371.1 2 7 6

DGX 75/2/G50V 230V/1Ph PZ/0190.001 2140181038B \ 500.553.9 2 7.9 7

DGX 75/2/G50V 400V/3Ph PZ/0191.001 2140181038B \ 500.551.4 2 7.9 7

DGX 100/2/G50V 230V/1Ph PZ/0192.001 2730221038C \ 500.886.5 2 11.6 8.8

DGX 100/2/G50V 400V/3Ph PZ/0193.001 2730221038C \ 500.882.3 2 11.6 8.8

DGX 150/2/G50V 230V/1Ph PZ/0196.001 3050231038D \ 501.18.2 2 12.8 8.8

DGX 150/2/G50V 400V/3Ph PZ/0197.001 3050231038D \ 501.12.7 2 12.8 8.8

DGX 200/2/G50V 230V/1Ph PZ/0200.001 3275231038E \ 501.59.3 2 13.7 10.6

DGX 200/2/G50V 400V/3Ph PZ/0201.001 3275231038E \ 501.53.6 2 13.7 10.6

MAXIMUM

HEAD m

CAPACITY l/sec



DGG RANGEWith a set back vortex impeller this submersible sewage pump is ideal for unstrained soiled biological wastewaters and sewage for civil lifting applications. Therefore making this pump ideal for wastewater treatment plants, sewer systems, industrial and agricultural applications.

Features:

– Cast iron EN-GJL-250 construction

– Ecological dry-powdered motor

– Two silicon carbide mechanical seals in oil chamber

– Vertical or horizontal discharge

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

30

25

20

15

10

5

0 0 10 20 30 40 50 60 70 80 90 100 110

A

CURVEPRODUCT CODE

CABLE** m

PRICE £

WEIGHT kg

FREE PASSAGE

mm


OUTPUT

amp mm inchkW

DISCHARGE

PZ/1755.001

PZ/1777.200

PZ/1785.200

PZ/1781.200

PZ/1789.200

PZ/1779.200

PZ/1787.200

PZ/1783.200

PZ/1791.200

PZ/1776.200

PZ/1784.200

PZ/1780.200

PZ/1788.200

PZ/1778.200

PZ/1786.200

PZ/1782.200

PZ/1790.2001450

1400

1500

1600

1700

1500

1600

1700

1800

1400

1500

1600

1700

1500

1600

1700

180035

26

27

28.5

29.5

27

28

29

30

26

27

28.5

29.5

27

28

29

3010O

10S

10S

10S

10S

10S

10S

10S

10S

10S

10S

10S

10S

10S

10S

10S

10S65

35

50

35

50

35

50

35

50

35

50

35

50

35

50

35

50A \

A \

A \

A \

A \

A \

A \

A \

A \

A \

A \

A \

A \

A \

A \

A \

A \65

40

50

40

50

40

50

40

50

40

50

40

50

40

50

40

501.8

0.55

0.55

1.1

1.1

0.75

0.75

1.5

1.5

0.55

0.55

1.1

1.1

0.75

0.75

1.5

1.53.7

4.2

4.2

6.6

6.6

4.9

4.9

9.3

9.3

1.4

1.4

2.4

2.4

1.7

1.7

3.3

3.32.5

1.5

2

1.5

2

1.5

2

1.5

2

1.5

2

1.5

2

1.5

2

1.5

212.6

8.3

6.8

13.6

11.9

10.8

9.4

16

14

8.3

6.8

13.6

11.9

10.8

9.4

16

1412.9

5.5

5.8

7.1

7

6.4

5.6

7.8

11.3

5.5

7

7.1

8.6

6.4

7.7

7.8

11.3

PZ/1438.002 165044.210O65A \ 652.24.6 2.5 14.1 10

PZ/1756.001 15003510O65A \ 651.83.7 2.5 12.6 14.5

PZ/1440.002 179046.210O65A \ 652.24.6 2.5 14.2 15.4

PZ/1441.002 21505010O65A \ 653.06.4 2.5 17.3 17.7

PZ/1517.002 280071.210O65A \ 654.07.7 2.5 18.8 20.8PZ/1510.002 310073.910O65A \ 655.510.8 2.5 21.5 23.8

PZ/1511.002 340081.810O65A \ 657.513.7 2.5 24.5 26.9

PZ/1757.001 15503510O80A \ 801.83.7 3 7.3 17.2

PZ/1443.002 190044.210O80A \ 802.24.6 3 8.5 13.5

PZ/1444.002 23004710O80A \ 803.06.4 3 12.3 16.8

PZ/1518.002 290071.610O80A \ 804.07.7 3 16.3 23.1

PZ/1512.002 320074.310O80A \ 805.510.8 3 16.4 28.0

PZ/1513.002 350082.210O80A \ 807.513.7 3 20.8 36.5

PZ/1452.002 195055.210O65A \ 651.53.4 2.5 9.9 16.5

PZ/1446.002 205058.110O65A \ 651.84.3 2.5 10.9 18.0

PZ/1447.002 230058.210O65A \ 652.25.2 2.5 11.6 19.3

PZ/1460.002 245059.810O65A \ 653.06.7 2.5 12.3 23.1PZ/1453.002 200055.210O80A \ 801.53.4 3 9.5 23.3

PZ/1450.002 210058.110O80A \ 801.84.3 3 10.2 25.2

PZ/1451.002 240058.210O80A \ 802.25.2 3 11.0 23.1

PZ/1461.002 255059.810O80A \ 803.06.7 3 10.9 27.6

PZ/1519.002 37009710O60A \ 804.08.4 3 13.8 30.5

PZ/1520.002 460097.210O60A \ 805.511.9 3 16.6 40.5

PZ/1470.002 210058.210O100A \ 1001.53.4 4 7.7 17.3

PZ/1454.002 220061.110O100A \ 1001.84.3 4 8.5 26.4

PZ/1455.002 250061.210O100A \ 1002.25.2 4 9.5 24.8

PZ/1456.002 265062.810O100A \ 1003.06.7 4 10.1 37.1

PZ/1514.002 39008310O80A \ 1004.08.4 4 11.5 44.2

PZ/1515.002 490083.210O80A \ 1005.511.9 4 13.0 52.1

PZ/1651.001 5900177.210O100A \ 1009.017.0 4 19.8 61.3

DGG 250/2/G65V B0AT

DGG 75/2/G40V B3AM

DGG 75/2/G50H A3AM

DGG 150/2/G40V C3AM

DGG 150/2/G50H B3AM

DGG 100/2/G40V B3AM

DGG 100/2/G50H A3AM

DGG 200/2/G40V C3AM

DGG 200/2/G50H B3AM

DGG 75/2/2G40V B3AT

DGG 75/2/G50H A3AT

DGG 150/2/G40V C3AT

DGG 150/2/G50H B3AT

DGG 100/2/G40V B3AT

DGG 100/2/G50H A3AT

DGG 200/2/G40V C3AT

DGG 200/2/G50H B3AT

DGG 300/2/G65V A0ET

DGG 250/2/65 B0AT

DGG 300/2/65 C0ET

DGG 400/2/65 D0ET

DGG 550/2/65 A0FTDGG 750/2/65 A0FT

DGG 1000/2/65 A0FT

DGG 250/2/80 F0AT

DGG 300/2/80 G0ET

DGG 400/2/80 H0ET

DGG 550/2/80 N0FT

DGG 750/2/80 A0FT

DGG 1000/2/80 A0FT

DGG 200/4/65 F0ET5

DGG 250/4/65 F0ET5

DGG 300/4/65 F0ET5

DGG 400/4/65 G0ET5DGG 200/4/80 E0ET5

DGG 250/4/80 E0ET5

DGG 300/4/80 E0ET5

DGG 400/4/80 M0ET5

DGG 550/4/80 D0FT5

DGG 750/4/80 D0FT5

DGG 200/4/100 E0ET5

DGG 250/4/100 E0ET5

DGG 300/4/100 E0ET5

DGG 400/4/100 D0ET5

DGG 550/4/100 G0FT5

DGG 750/4/100 G0FT5

DGG 1200/4/100 B0HT

MAXIMUM

HEAD m

CAPACITY l/sec

HORI

ZON

TAL

2 PO

LE 6

5mm

HORI

ZON

TAL

2 PO

LE 8

0mm

H***

4 PO

LE 6

5mm

HORI

ZON

TAL

4 PO

LE 8

0mm

HORI

ZON

TAL

4 PO

LE 1

00m

m

B

ATEX*Standard

OrOption

*ATEX key: S = ATEX as standard O = ATEX version additional option. **Excludes cable. ***V = Vertical, H = Horizontal.

HORI

ZON

TAL

2 PO

LE 5

0mm

VERT

ICAL

2 PO

LE 4

0mm


V***

2

POLE

65

mm

24

02 – SEWAGE PUMPS


PZ/1652.001 7300177.2O 10100A \ 10011.020.5 4 22.1 66.2

PZ/1653.001 7900189.2O 10100A \ 10015.030.8 4 23.3 70.9

PZ/1654.001 6900212O 10125A \ 1509.017.0 6 10.9 91.6

PZ/1655.001 8300212O 10125A \ 15011.020.5 6 12.7 95.8

DGG 1500/4/100 B0HT

DGG 2000/4/100 B0HT

DGG 1200/4/150 A0HT

DGG 1500/4/150 A0HT

DGG 2000/4/150 A0HT PZ/1656.001 8900224O 10125A \ 15015.030.8 6 15.5 105.6

H***

4 PO

LE

100m

m02 – SEWAGE PUMPS

25

CURVEPRODUCT CODE

CABLE* m

PRICE £

WEIGHT kg

FREE PASSAGE

mm


OUTPUT

amp mm inchkW

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

ATEX*Standard

OrOption

*ATEX key: S = ATEX as standard O = ATEX version additional option. **Excludes cable. ***V = Vertical, H = Horizontal.

HANDLERugged stainless steel lifting and carrying handle.

CABLE GLANDThe universal GAS thread of the cable gland is able to take a sheathing pipe to protect the power cable from mechanical or chemical damage due to turbulence or the aggressive nature of the liquid.

DRIVE SHAFTDrive shaft in AISI 431 stainless steel. Connection to impeller via tapered coupling.

PRESSURISED TESTINGEvery model undergoes pressurised testing to guarantee perfect assembly and operation of the gaskets, cable gland and mechanical seals.

ANTI-CLOGGING SYSTEM [DR] [GR]The special conformation of the hydraulic part ensures the expulsion of solids and prevents fouling of the impeller.

MECHANICAL SEALS + V-RINGTwo mechanical seals in silicon carbide (SiC-SiC) enclosed in an inspectable oil chamber. This prevents all contact between the mechanical seals and any solids or filaments in the wastewater.

OIL CHAMBERLarge, inspectable oil chamber to guarantee longer mechanical seal lifetime. Leakage detection sensor.

DGGVortex

impeller

DRGChannel impeller

GRGGrinding impeller

APGHigh head impeller

H***

4 PO

LE

150m

m


E-FLOW RANGE C

PERFORMANCE DATA

HEA

D / m

30

25

20

15

10

5

0

CAPACITY / l/sec

0 10 20 30 40 50 60 70 80 90 100 110

B

CD

G HI J

KA

EF

CURVEPRODUCT CODE

CABLE m

PRICE £

WEIGHT kg

FREE PASSAGE

mm


OUTPUT

amp mm inchkW

DISCHARGE

E100-2.2-1 400V/3Ph PB/E100-2.2-1/SL 40001122076A \ 1002.25.3 4 7.5 19

E100-2.2-2 400V/3Ph PB/E100-2.2-2/SL 40001122076B \ 1002.25.3 4 12 15

E100-4.0-3 ASD 400V/3Ph PB/E100-4.0-3/SL 44001392076C \ 1004.09.0 4 14.2 28.3

E100-4.0-4 ASD 400V/3Ph PB/E100-4.0-4/SL 44001392076D \ 1004.09.0 4 16.3 28

E100-4.0-5 ASD 400V/3Ph PB/E100-4.0-5/SL 44001392076E \ 1004.09.0 4 20 20

E100-5.5-5 ASD 400V/3Ph PB/E100-5.5-5/SL 45001412076F \ 1005.512.0 4 19.6 20.5

E100-5.5-6 ASD 400V/3Ph PB/E100-5.5-6/SL 45001412076G \ 1005.512.0 4 21.5 42.4

E150-7.5-2 ASD 400V/3Ph PB/E150-7.5-2/SL 530021720105H \ 1507.516.5 6 17 65

E150-11-3 ASD 400V/3Ph PB/E150-11-3/SL 680028720105I \ 1501123.0 6 22.2 88

E150-15-4 ASD 400V/3Ph PB/E150-15-4/SL 740032220105J \ 1501530.5 6 25 93

E150-18-5 ASD 400V/3Ph PB/E150-18.5-5/SL 790034520105K \ 15018.536.5 6 29 105

320PZS/0404#032330DN100 AUTO COUPLING

MAXIMUM

HEAD m

CAPACITY l/sec

Submersible sewage pumps with a single-channel impeller and explosion proof motor as standard (suitable for use in Zone 1 – hazardous gas areas).

These pumps are ideal for pumping water and other liquids, with uses in sewage, effluent and drainage pumping.

The E-Flow series are available with a selection of motor / impeller combinations, enabling flexibility to match specific application and performance requirements.

Features:




– Oil seal leak sensor as standard

– 100-150mm discharge

29.5

1180PZS/150-A/COUPDN150 AUTO COUPLING 116

26

02 – SEWAGE PUMPS


CURVEPRODUCT CODE

CABLE m

PRICE £

WEIGHT kg

FREE PASSAGE

mm


OUTPUT

amp mm inchkW

DISCHARGE

V100-1.5-1 400V/3Ph PB/V100-1.5-1/SL 255011320100A \ 1001.54.0 4

V100-2.2-1 400V/3Ph PB/V100-2.2-1/SL 270011620100B \ 1002.25.3 4

V100-2.2-2 400V/3Ph PB/V100-2.2-2/SL 270011620100C \ 1002.25.3 4

V100-4.0-3 ASD 400V/3Ph PB/V100-4.0-3/SL 330014220100D \ 1004.09.0 4

V100-4.0-4 ASD 400V/3Ph PB/V100-4.0-4/SL 330014220100E \ 1004.09.0 4

V100-5.5-4 ASD 400V/3Ph PB/V100-5.5-4/SL 340014420100F \ 1005.512.0 4

V100-5.5-5 ASD 400V/3Ph PB/V100-5.5-5/SL 340014420100G \ 1005.512.0 4

V100-7.5-5 ASD 400V/3Ph PB/V100-7.5-5/SL 390016520100H \ 1007.516.5 4

29.5DN100 AUTO COUPLING PZS/0404#032330 330

CV-FLOWSubmersible sewage pumps with a Vortex-type impeller for excellent solids passage, avoidance of blockage and ability to handle fibrous material, also incorporating an explosion proof motor as standard (suitable for use in Zone 1 – hazardous gas areas).

V-Flow pumps are ideal for pumping water and other liquids, with uses in sewage, effluent and drainage pumping. Available with a selection of motor / impeller combinations, enabling flexibility to match specific application and performance requirements.

Features:




– 1.5 – 7.5kW output

– 100mm discharge


– Oil seal leak sensor as standard

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

18

16

14

12

10

8

6

4

2

0 0 5 10 15 20 25 30

B

CD

G

H

A

E

F

02 – SEWAGE PUMPS

27www.ttpumps.com / T: +44 (0) 1630 647200 Same day dispatch. Lead time applies. Please note: Our minimum order is £50. Please check our website for the most up-to-date prices and stock availability.

CABLE* m

PRICE £

WEIGHT** kg

FREE PASSAGE

mm


OUTPUT

amp inchkW

DISCHARGEPRODUCT CODE

CURVE

mm

GR BLUE PROFESSIONAL B

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

30

25

20

15

10

5

0 0 1 2 3 4 5

B

CA

Designed for domestic and professional use, the GR Blue Pro range of submersible pumps with high-head cast iron impeller and chromium steel cutter, boasts an impressive 69,000 cuts per minute. The GR Blue Pro models are equipped with an intake cutting system composed of a steel plate and triple-bladed rotar cutter. This system cuts fibres and stringy bodies and assures smooth pump function.Features:– Cast iron construction & impeller – Double mechanical seal within oil bath – 0.74 – 1.5kW output – 69,000 cuts per minute – 7mm solids handling – 40mm horizontal discharge – Automatic as standard; can be converted to manual upon request– Threaded, flanged discharge

MAXIMUM

HEAD m

CAPACITY l/sec

11/2

11/2

11/2

11/2

11/2

11/2

GR BLUE PRO 100/2/G40H 230V/1Ph 790191000.745.5

GR BLUE PRO 100/2/G40H 400V/3Ph 790191000.742.7

GR BLUE PRO 150/2/G40H 230V/1Ph 920241001.17.5

GR BLUE PRO 150/2/G40H 400V/3Ph 920241001.13.2

GR BLUE PRO 200/2/G40H 230V/1Ph 1300251001.510.0

GR BLUE PRO 200/2/G40H 400V/3Ph 130025100

PZ/1116.002

PZ/1117.002

PZ/1118.001

PZ/1119.002

PZ/1120.001

PZ/1121.001

A \A \B \B \C \C \

40 18 4.7

40 18 4.7

40 21 5

40 21 5

40 26.9 5.6

40 26.9 5.61.54.3

GRI GRINDER RANGE B

PERFORMANCE DATA

CAPACITY / l/sec

HEA

D / m

35

30

25

20

15

10

5

0

0 2 4 6

A

MAXIMUM

HEAD m

CAPACITY l/sec

GRI feature multi-channel open impellers and separate rotating cutter blades operating at the pump intake. Well-suited for use with liquids containing solids which require cutting prior to being pumped, minimising the risk of blocking and providing efficiency and economy. All units are constructed in cast iron for strength and durability, with a special hardened steel cutter.

Features:



– Cutting action gives 69,000 cuts PER minute

– Threaded, flanged discharge

CURVEPRODUCT CODE

CABLE m

PRICE £

WEIGHT* kg

FREE PASSAGE

mm


OUTPUT

amp mm inchkW

DISCHARGE

GRI 200/2/G50H-A0CM 230V/1Ph PZ/0278.004 154032100A \ 50 23.3 6.81.710.6 2

GRI 200/2/G50H-A0CT 400V/3Ph PZ/0279.004 154032100A \ 50 23.3 6.81.73.8 2


28

02 – SEWAGE PUMPS



GRG RANGEThe GRG features a cast iron multi-channel open impeller and external cutting mechanism.

These pumps are suitable for sewage water and lifting of liquids containing suspended solids or fibres.

ATEX version available on request, to make pump suitable for installation in potentially explosive atmospheres.

Features:

- Cast iron multi-channel open impeller

- Griding system with rotary knife

- Max operating temperature: 40°C

- Max immersion depth: 20m

B

CURVE CABLE m

PRICE £

WEIGHT** kg

FREE PASSAGE

mm

DELIVERY STATUS

OUTPUT

amp mm inchkW

DISCHARGE

2250

2000

2600

4100

31.5

32

45

60.3

10

10

10

10

0 S

0 O

0 O

0 O

A \

E \

40

40

50

50

17.6

28.1

33.5

46.4

4.6

5.3

4.8

8.3

1.1

1.8

3

5.5

2.4

3.7

6.4

10.8

2350

2200

3100

5100

32

43.2

57.6

68.2

10

10

10

10

0 S

0 O

0 O

0 O

B \

F \

40

50

50

50

23.8

29.7

42.4

53.1

4.7

5.4

4.5

8.4

1.5

2.2

4

7.5

3.3

4.6

7.7

13.7

PRODUCT CODE

PZ/1772.200

PZ/1467.002

PZ/1770.200

PZ/1522.002

PUMP TYPE

GRG 150/2/G40H B3AT

GRG 400/2/G50H D0ET

GRG 200/2/G40H B3AT

GRG 550/2/G50H D0FT

1.5

1.5

2

2

1.5

2

2

2

MAXIMUM

HEAD m

CAPACITY l/sec

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

14

12

10

8

6

4

2

0 0 5 10 15

A B C

The TT305, TT505 and TT510 submersible pumps are designed for transferring sewage and effluent, and for dirty water drainage. This range of pumps have a shredding action produced by the impeller rotating against a special serrated suction cover, this reduces any destructible matter to a manageable size for pumping, minimising the risk of blockage and allowing better efficiency and economy.Features:– Cast iron construction – Double mechanical seal within oil bath – 15mm solids handling – 0.85 – 1.8kW output – 80mm discharge – Auto-coupling available

TT305 / TT505 / TT510 B

CURVEPRODUCT CODE

CABLE m

PRICE £

WEIGHT kg

FREE PASSAGE

mm


OUTPUT

amp mm inchkW

DISCHARGE

TT305 230V/1Ph PE/TT305/1 1320511015A \ 800.857.5 3 10 10

TT305 400V/3Ph PE/TT305/3 1320511015A \ 800.852.0 3 10 10

TT505 230V/1Ph PE/TT505/1 1425551015B \ 801.259.6 3 10.5 12.5

TT505 400V/3Ph PE/TT505/3 1425551015B \ 801.252.6 3 10.5 12.5

TT510 400V/3Ph PE/TT510/3 1525551015C \ 801.83.5 3 12 15

MAXIMUM

HEAD m

CAPACITY l/sec

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

50

40

30

20

10

0 0 1 2 3 4 5 6 7 8 9

AB

C

D

E

F

G

H

GRG 250/2/G40H A0AT

GRG 750/2/G50H A0FT

GRG 300/2/G50H C0ET

GRG 1000/2/G50H A0FT

PZ/1750.001

PZ/1506.002

PZ/1465.002

PZ/1507.002

C \

G \

D \

H \

ATEX*Standard

OrOption

*ATEX key: S = ATEX as standard O = ATEX version additional option. **Excludes cable.


02 – SEWAGE PUMPS


TT1008 / TT1409 B

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

18

16

14

12

10

8

6

4

2

0 0 10 20 30 40 50

BA

CURVEPRODUCT CODE

CABLE m

PRICE £

WEIGHT kg

FREE PASSAGE

mm


OUTPUT

kW

DISCHARGE

mmamp inch

MAXIMUM

HEAD m

CAPACITY l/sec

8.5

11.1

TT1008 400V/3Ph PE/TT1008/3 3100140810012.5 35.8A \ 4

TT1409 400V/3Ph PE/TT1409/3 3650140810016.1 45B \100

1005.5

4

4

The TT1008 and TT1409 submersible pumps are designed for transferring sewage and effluent, and for dirty water drainage. A shredding action is produced by the impeller rotating against a special serrated suction cover, and reduces any destructible matter to a manageable size for pumping, minimising the risk of blockage and allowing better efficiency and economy.Features:– Cast iron construction – Double mechanical seal within oil bath

The PTS series are a range of heavy duty submersible chopping pumps, ideal for particularly heavy applications that require a preliminary chopping of the solid material suspended in the liquid being pumped. Each pump has a large, through-passage, open multi-channel impeller and double cutting system in suction inlet.

Features:


– Heavy duty double chopping system


– Auto coupling available

– Available with seal leak probe

– Nitec (corrosion resistant) coating now available

– ATEX approved version available

– Available in cooling jacket version

PTS 65 – 150 SERIES

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

48444036322824201612840

0 20 40 60 80 100

O

A

B C

KE

G

F

NJ

H

MLID

C

PTS 80N SERIES PTS 100 – 150 SERIESPTS 65 SERIES


30

02 – SEWAGE PUMPS


OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

CABLE m

PRICE £

WEIGHT kg


PCR/PTSEX7.5-65/3 670010

PCR/PTSEX9-65/3 690010

PCR/PTSEX11-65/3 780010

PCR/PTSEX2.2-80N 460010

PCR/PTSEX7.5-100/3

590010

PCR/PTSEX3-80N 470010

PCR/PTSEX9-100/3

570010

PCR/PTSEX4-100/3

850010

PCR/PTSEX15-150/3

610010

PCR/PTSEX15-80N

830010


PCR/PTSEX11-150/3

590010

PCR/PTSEX5.5-100/3

870010

PCR/PTSEX18.5-150/3

810010

PCR/PTSEX18.5-80N

850010

A \

B \

C \

D \

E \

F \

G \

H \

I \

J \

K \

L \

M \

N \

O \

PTSEX 7.5-65 400V/3Ph

PTSEX 9-65 400V/3Ph

PTSEX 11-65 400V/3Ph

PTSEX 2.2-80N 400V/3Ph

PTSEX 7.5-100 400V/3Ph

PTSEX 3-80N 400V/3Ph



PTSEX 15-150 400V/3Ph



PTSEX 11-150 400V/3Ph

PTSEX 5.5-100 400V/3Ph

PTSEX 18.5-150 400V/3Ph

PTSEX 18.5-80N 400V/3Ph

ATEX Version

1253322.3657.515.8 2.5

1303524.865919 2.5

1913628.8651123.5 2.5

742810.7802.25.3 3

1284514.71007.515.8 4

772712.9803.06.4 3

1334816.11009.019 4

88389.81004.09.1 4

2269218.615015.030 6

168.53238.98015.031.2 3

783014.7804.09.1 3

2138515.215011.023.5 6

12242121005.512.5 4

2299421.515018.536 6

1833945.58018.536.5 3

OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

CABLE m

PRICE £

WEIGHT kg


PTS 7.5-65 400V/3Ph PCR/PTS7.5-65/3 5400125103322.3657.515.8 2.5

PTS 9-65 400V/3Ph PCR/PTS9-65/3 5600130103524.865919 2.5

PTS 11-65 400V/3Ph PCR/PTS11-65/3 6400191103628.8651123.5 2.5

PTS 2.2-80N 400V/3Ph PCR/PTS2.2-80N 370074102810.7802.25.3 3

PTS 7.5-100 400V/3Ph PCR/PTS7.5-100/3 4550128104514.71007.515.8 4

PTS 3-80N 400V/3Ph PCR/PTS3-80N 380077102712.9803.06.4 3

PTS 9-100 400V/3Ph PCR/PTS9-100/3 4700133104816.11009.019 4

PTS 4-100 400V/3Ph PCR/PTS4-100/3 39008810389.81004.09.1 4

PTS 15-150 400V/3Ph PCR/PTS15-150/3 7050226109218.615015.030 6

PTS 15-80N 400V/3Ph PCR/PTS15-80N 7600168.5103238.98015.031.2 3

PTS 4-80N 400V/3Ph PCR/PTS4-80N 390078103014.7804.09.1 3

PTS 11-150 400V/3Ph PCR/PTS11-150/3 6850213108515.215011.023.5 6

PTS 5.5-100 400V/3Ph PCR/PTS5.5-100/3 44501221042121005.512.5 4

PTS 18.5-150 400V/3Ph PCR/PTS18.5-150/3 7200229109421.515018.536 6

PTS 18.5-80N 400V/3Ph PCR/PTS18.5-80N 7800183103945.58018.536.5 3

A \

B \

C \

D \

E \

F \

G \

H \

I \

J \

K \

L \

M \

N \

O \

ATEX VERSIONS

02 – SEWAGE PUMPS


32

02 – SEWAGE PUMPS

B

Self-priming trash pumps ideal for pumping liquids with large solids in suspension. They are used on purification plants and sewage systems where their maintenance friendly design, provides a completely safe, waste management solution.

Features:

– Rapid self-priming without foot valve. Once filled with water, the pump is automatically primed to a height of 7.5m

– Total safety for operators. Being placed outside and above liquid to be pumped, inspection and maintenance of the pump are made easier, with greatly reduced health and safety hazards for personnel

– Two vane semi-open impeller handling up to 3” (76mm) solids

– Easy maintenance: back pull-out rotating assembly which can be removed without dismantling the pipes or pump casing

– Material of Construction: Ductile Iron or Ductile Iron with internal components in Stainless steel

ST-R RANGE

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

40

30

20

10

0 0 10 20 30 50 60 100 170 250 350 420 600

A

B

CD

E

F

G

MAX HEAD m

PRICE £

MAX SUCTION m

MOTOR RANGE kW

RPM RANGE m3/h


FREE PASSAGE mm

ST-R 2 P.O.A.71.51450838

ST- R 2 P.O.A.77.529503538

ST-R 3 P.O.A.75.514501663

ST-R 4 P.O.A.711

CURVE

A \

B \

C \

D \ 14501876

ST-R 6 P.O.A73014502876

ST-R 8 P.O.A.718.59501776

ST-R 8 P.O.A75514503376

E \

F \

G \


02 – SEWAGE PUMPS

33

SUBMERSIBLE ELECTRIC PUMPSFOR DRAINAGE, CIVIL AND

INDUSTRIAL LIFTING SYSTEMS

Speak to our sales team for more information or visit www.ttpumps.com/pumps/products/sewage-pumps


34

02 – SEWAGE PUMPS

– Cast iron structure

– Three-phase motor from 0.37kW to 18.5 kW

– Insulation: class H (180°C)

– Protection rating: IP68

– 50 Hz and 60 Hz versions

– Thermal protection devices incorporated in stator

– AISI 431 drive shaft

– Two silicon carbide mechanical seals in large oil chamber

– Discharge from DN32 to DN250

– Large free passage

– ATEX versions available on request.

CHARACTERISTICS

OVERVIEW OF OPERATING RANGES

INSTALLATION TYPES

PERFORMANCE DATA PERFORMANCE DATA

HEA

D / m

HEA

D / m

CAPACITY / l/sec CAPACITY / l/sec

50

40

30

20

10

0

50

40

30

20

10

0 20 40 60 80 100 120 140 160 180 200 0 1 2 3 4 5 6 7 8 9 10

DRG DGG APG GRG

0

BOTTOM COUPLERS– Cast iron body – steel metal fasteners– Vertical and horizontal discharge– DN 65 ÷ DN 250

BALL CHECK VALVES– Cast iron body – steel metal fasteners– Rubber ball– DN 65 ÷ DN 250

GATE VALVES– Cast iron body with bronze seats– Full free passage

DISCHARGE BENDS– In cast iron or galvanised steel– Full free passage– DN 65 ÷ DN 250

BASE PLATES– In cast iron or galvanized steel– Ideal for free installation

CHAINS– In stainless and galvanised steel– Ø 5mm, 8mm, 12mm

FREE installation

Installation with BOTTOM COUPLER

PERMANENT installation

A full range of accessories supplied as standard simplifies any installation.


02 – SEWAGE PUMPS

35

YOUR GUIDE TO GREY

HANDLERugged stainless steel lifting and carrying handle.

CABLE GLANDThe universal GAS thread of the cable gland is able to take a sheathing pipe to protect the power cable from mechanical or chemical damage due to turbulence or the aggressive nature of the liquid.

DRIVE SHAFTDrive shaft in AISI 431 stainless steel. Connection to impeller via tapered coupling.

PRESSURISED TESTINGEvery model undergoes pressurised testing to guarantee perfect assembly and operation of the gaskets, cable gland and mechanical seals.

ANTI-CLOGGING SYSTEM [DR] [GR]The special conformation of the hydraulic part ensures the expulsion of solids and prevents fouling of the impeller.

MECHANICAL SEALS + V-RINGTwo mechanical seals in silicon carbide (SiC-SiC) enclosed in an inspectable oil chamber. This prevents all contact between the mechanical seals and any solids or filaments in the wastewater.

OIL CHAMBERLarge, inspectable oil chamber to guarantee longer mechanical seal lifetime. Leakage detection sensor.

DGGVortex

impeller

DRGChannel impeller

GRGGrinding impeller

APGHigh head impeller


36

02 – SEWAGE PUMPS

HIGH EFFICIENCYSUBMERSIBLE

ELECTRIC PUMPS

Speak to our sales team for more information or visit www.ttpumps.com/pumps/products/sewage-pumps


02 – SEWAGE PUMPS

37

– Cast iron structure (stainless steel on request)

– Class H electric motor from 1.8 kW to 355 kW in efficiency class IE3

– 50 Hz and 60 Hz versions

– Thermal protection devices incorporated in stator

– Long life bearings (100,000 hours)

– AISI 431 drive shaft (AISI 329 on request)

– Leakage detection system in seal chamber (standard) and motor (on request)

– Two silicon carbide mechanical seals in large oil chamber and V-rings

– Discharge from DN50 to DN600

– Large free passage declared for every model

– Patented closed jacket cooling system with internal recirculation

– Operating temperature up to 60°C (up to 80°C on request)

– ATEX II 2G Ex db k IIB T4 / II 2D Ex tb IIIC T135°C certification on request

UNIQA CHARACTERISTICS

OVERVIEW OF OPERATING RANGES

STANDARD EQUIPMENT AND OPTIONS

ZUG VZUG OCZUG GRZUG HP

Q / l/sec

9070

504030

20

10

543

2

1

0.7

0.51 2 3 4 7 10 20 30 40 70 100 200 300 400 700 1000 2000

HEA

D / m

STANDARD OPTIONAL230, 500, 230/400, 440, 500/866V400V

IE2 – High EfficiencyMax ± 5% (S1 duty)

VFD – 60HzIE3 – Premium Efficiency

–3 ~ 50Hz

Direct, Soft StartH

60°C or aboveY ∆

EMC (VFD)40°C

20 – 30 – 40 – 50mS1RN8-F or equivalent

Bicoponent epoxy – 400 µm10m

–PTC/PT100 thermistors

Bicoponent epoxy – 200 µm2 SiC/SiC mechanical seals in oil chamber

Compartment water leakage sensor (single signal)Oil chamber

Motor compartmentMotor compartment cover

Compartment water leakage sensor

(single signal)

Dry–

YESYES

NOYES

SubmersibleBimetal thermal sensors (150°C)

YESNO

YESNO

YESNO

PTC/PTC100NO

YES (III 2G Ex db k IIB T4 / II 2D Ex tb IIIC T135°C)NONO

–Max ± 10% (S3 duty)

Thermal sensors

Power supply voltage

Efficiency classPower supply

Motor insulation classStarting

Maximum ambient temperatureType of cableCable length

PaintingMechanical seals

Type of installation

Vibration sensors (bearings)Sacrificial anodes

ATEX certificationTemperature sensors (bearings)

Power voltage tolerance


38

02 – SEWAGE PUMPS

YOUR GUIDE TO UNIQAEXRange with certification.ATEX II 2G Ex db k IIB T4 / II 2D Ex tb IIIC T135°C.

CABLE GLANDCable gland system with cable holder. The universal thread ring-nut can be removed to fix a rigid or flexible duct to the cable gland to protect the cable from physical and mechanical stresses.On request a special resin seal is applied to prevent all possibility of water leaking into the motor even if the outer sheath is torn.

ELECTRICAL CONNECTIONSThe terminal board, which simplifies electrical wiring procedures, is in an airtight compartment which can be fitted with a leakage detection sensor.

PAINTINGBicomponent epoxy paint, standard thickness 200 µm (max 400 µm on request).

BEARINGSBall bearings with lifetime lubrication designed to guarantee 100,000 working hours.Optional sensors can monitor temperature and vibration to guarantee optimal performance.

WATER SENSORSensor fitted as standard to detect water or moisture in the mechanical seal oil chamber. Also standard on ATEX version models.

MECHANICAL SEALSTwo silicon carbide mechanical seals in oil sump and V-rings to ensure excellent reliability even in heavy-duty conditions.

SUCTION and DISCHARGEThe suction and discharge flanges can be ordered with holes of any standard type (UNI, ANSI, BS, etc.) to ensure perfect compatibility with the system and the accessories installed.

ZUG VVortex

hydraulics

ZUG OCChannel

hydraulics

ZUG CPChopper

hydraulics

ZUG VGrinder system

hydraulics

ZUG HPHigh head hydraulics


02 – SEWAGE PUMPS

39

EXCLUSIVE COOLING SYSTEM

Continuous operation of the pump (S1 duty) is ensured even in dry and partially submerged working conditions or in high temperature locations.

Axial recycling impeller

Double stainless steel jacket

Cooling liquid inspection and filler cap

Thanks to this unique system:– The cooling mix is always separate from the wastewater in which the pump is immersed and cannot be contaminated even if water leaks into the oil chamber due to wear of the first mechanical seal.– The mechanical seals are installed in an oil chamber separated from the cooling system and can be changed without draining the circuit.

The mix is recycled through the pump by an axial impeller rigidly mounted on the shaft and the specially designed steel double jacket which provides the necessary heat exchange between the motor and the external environment.

If the outer mechanical seal wears, the sensor warns that water is leaking into the oil chamber.The second mechanical seal allows the pump to continue operating temporarily, allowing scheduling of the maintenance job with no need for unplanned system stoppages.

In DRY version models, the motor is cooled by a water-glycol mix circulating in a special closed circuit.

No unpleasant surprises


NOTES

40Same day dispatch. Lead time applies. www.ttpumps.com / T: +44 (0) 1630 647200

Please note: Our minimum order is £50. Please check our website for the most up-to-date prices and stock availability.

www.ttpumps.com / T: +44 (0) 1630 647200

SECTION 03 CONTRACTORS PUMPS

OUTPUT

mm inchkWamp

PRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

WEIGHT kg

PRICE £

FREE PASSAGE

mm

PUMP TYPE OPERATION CABLE m

CAPACITY l/min

CURVE DELIVERY STATUS

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

25

20

15

10

5

0 0 100 200 300 400 500 600 700

B C A

T400 110V/1Ph PH/T400/110V MANUAL 13 27510712 22020.46A \ 50

T400Z 110V/1Ph Z FLOATPH/T400/110VZ 32513.310712 22020.46A \ 50

T400Z 230V/1Ph Z FLOATPH/T400/230VZ 32513.310712 22020.43A \ 50

T400F 110V/1Ph F FLOATPH/T400/110VF 30513.310712 22020.46A \ 50

T400F 230V/1Ph F FLOATPH/T400/230VF 30513.310712 22020.43A \ 50

T400 230V/1Ph MANUALPH/T400/230V 2751310712 22020.43A \ 50

T400 400V/3Ph MANUALPH/T400/400V 3451310712 22020.40.9A \ 50

T750 110V/1Ph MANUALPH/T750/110V 36515.510718 35020.7511B \ 50

T750F 110V/1Ph F FLOATPH/T750/110VF 39515.810718 35020.7511B \ 50

T750Z 110V/1Ph Z FLOATPH/T750/110VZ 41515.810718 35020.7511B \ 50

T750 230V/1Ph MANUALPH/T750/230V 36515.510718 35020.755.4B \ 50

T750F 230V/1Ph F FLOATPH/T750/230VF 39515.810718 35020.755.4B \ 50

T750Z 230V/1Ph Z FLOATPH/T750/230VZ 41515.810718 35020.755.4B \ 50

T750 400V/3Ph MANUALPH/T750/400V 43515.510718 35020.751.9B \ 50

T1500 110V/1Ph MANUALPH/T1500/110V 92519.610721 67021.526C \ 50



3” Discharge option for T750/T1500*

PHS/80MMH/TAIL 25

A range of submersible 2” drainage pumps that are compact, light and powerful. They are suitable for ground water and water containing sand and silt – maximum solids handling of 7mm.Features:– Cast iron volute casing– High abrasive resistance resin Vortex impeller– Double mechanical seal – Agitator– Float options available– Conversion kit available, see page 47– Power supply: Single phase 110V, 50Hz Single phase 230V, 50Hz Three Phase 400V, 50Hz

SUBMERSIBLE DEWATERING PUMP

A

* This product is a category C.

03 – CONTRACTORS PUMPS

42

TRENCHER WITH F FLOAT TRENCHER WITH Z FLOATThe T-T Float support, To keep float in secured fixed position, is available for all T1500 models of the Trencher®. Float support sold separately.

TRENCHER WITH FLOAT SUPPORT


OUTPUT

mm inchamp

PRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

WEIGHT kg

PRICE £

FREE PASSAGE

mm

VOLTAGE CABLE m

CAPACITY m3/h


PO/T500 SM/1 230 16.5 8208913 13.224.0A \ 50

400PO/T500 SM/3 82016.58913 13.22

kW

0.55

0.551.7A \ 50

The Trencher Slurry Mate is suitable for pumping highly laiden mud water. The impeller and agitator is made of high chrome alloy to ensure durability. The semi vortex impeller reduces clogging caused by sand making this pump ideal for construction and building sites.Features:– Water temperature: Up to 40°C– PH: 6.5 to 8.5– Power supply: Single phase 230V, 50Hz Three Phase 400V, 50Hz– Insulation class: F– Protection class: IP 68– Maximum immersion depth: 10 m

SUBMERSIBLE SLURRY PUMP

B

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

25

20

15

10

5

0 0 3 6 9 12 15 18

A

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

12

10

8

6

4

2

0 0 50 100 150 200 250 300 350 400

A

OUTPUT RATEDF.L.A. MAXIMUM

HEAD m

1Ø 110V

1Ø 230V

3Ø 400V

HEAD m

WEIGHT kg

PRICE £

FREE PASSAGE

mm

DISCHARGE CABLE m

CAPACITY l/min

CAPACITY l/min


2 15 89010388 11.7165 380A \

2 8901510388 11.7165 380A \

2

PRODUCT CODE

PH/LIBV750/110V

PH/LIBV750/400V

PH/LIBV750/230V 8901510388 11.7165 380

kW

0.75 11.5 - -

0.75 - - 2

0.75 - 5.6 -

amp

11.5

2.0

5.6A \

A

The Liberator Vortex is an extension to the Liberator range of submersible dewatering pumps. This model has high resistance to liquids containing sand and gravel with a motor frequency of 50Hz. It is able to withstand harsh conditions particularly amongst the abrasive material in sludge content. It is suitable for a range of different applications, including emergency dewatering.Features:– High resistance to liquids containing sand and gravel– Steel coated with thermoplastic polyester elastomer– Free passage to 38mm in diameter– Light weight– Durable construction– Pump body is highly resistant to impact– Quick & easy replacement of wear components– Max temperature: 40°C– Power supply: Single phase 110V, 50Hz Single phase 230V, 50Hz Three Phase 400V, 50Hz

inchmm

50

50

50

CONTRACTORS PUMPS – 03


3” Discharge option (for 1500 models)* PHS/80MMKIT 25

SS/316 LIB400 230V/1Ph

SS/316 LIB750 230V/1Ph

MANUALPH/LIB400/SS/316 8501710711 22520.43A \

B \

50

MANUALPH/LIB750/SS/316 11201910715.8 30020.755 50

LIB400 400V/3Ph MANUALPH/LIB400/400V 3501310711 22520.40.9A \ 50

LIB750 110V/1Ph MANUALPH/LIB750/110V 4851610715.3 30020.7511B \ 50

LIB750F 110V/1Ph F FLOATPH/LIB750/110VF 5151610715.3 30020.7511B \ 50

LIB750Z 110V/1Ph Z FLOATPH/LIB750/110VZ 5351610715.3 30020.7511B \ 50

LIB750 230V/1Ph MANUALPH/LIB750/230V 4851610715.3 30020.755.4B \ 50

LIB750F 230V/1Ph F FLOATPH/LIB750/230VF 5151610715.3 30020.755.4B \ 50

LIB750Z 230V/1Ph Z FLOATPH/LIB750/230VZ 5351610715.3 30020.755.4B \ 50

LIB750 400V/3Ph MANUALPH/LIB750/400V 5401610715.3 30020.751.9B \ 50

LIB1500 110V/1Ph MANUALPH/LIB1500/110V 11002410720 47021.526C \ 50



LIB400F 230V/1Ph F FLOATPH/LIB400/230VF 3401310711 22520.43A \ 50

LIB400 230V/1Ph MANUALPH/LIB400/230V 3201310711 22520.43A \ 50

LIB400Z 230V/1Ph Z FLOATPH/LIB400/230VZ 3601310711 22520.43A \ 50

The Liberator® range of submersible drainage pumps that are compact, light and powerful. They are suitable for groundwater and water containing sand and silt. They have a maximum solids handling of 7mm.Features:– Compact, lightweight design– High abrasive resistance resin Vortex impeller– Double mechanical seal– Float options available– Continuously rated – Power supply: Single phase 110V, 50Hz Single phase 230V, 50Hz Three Phase 400V, 50Hz

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

20181614121086420

0 50 100 150 200 250 300 350 400 450 500

A B C

SUBMERSIBLE DEWATERING PUMP

OUTPUT

mm inchkWamp

PRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

WEIGHT kg

PRICE £

FREE PASSAGE

mm

PUMP TYPE OPERATION CABLE m

CAPACITY l/min


LIB400 110V/1Ph PH/LIB400/110V MANUAL 13 32010711 22520.46A \ 50

LIB400Z 110V/1Ph Z FLOATPH/LIB400/110VZ 3601310711 22520.46A \ 50

LIB400F 110V/1Ph F FLOATPH/LIB400/110VF 3401310711 22520.46A \ 50

A

* This product is a category C.

LIBERATOR WITH F FLOAT LIBERATOR WITH Z FLOAT LIBERATOR WITH FLOAT SUPPORTThe T-T Float support, To keep float in secured fixed position, is available for all versions of the Liberator® Float support sold separately.




SS/316 PAL750 230V PH/PAL750/SS/316 19106 118015.8 30020.755.4 50B \

SS/316 PAL400 230V PH/PAL400/SS/316 17106 92011 22520.43 50A \

PAL400 110V PH/PAL400/110V 12106 37011 22520.46 50A \

PAL400 400V PH/PAL400/400V 12106 40011 22520.40.9 50A \

PAL750 400V PH/PAL750/400V 15106 52015.8 30020.751.9 50B \

PAL400 230V PH/PAL400/230V 12106 37011 22520.43 50A \

PAL750 230V PH/PAL750/230V 15106 49015.8 30020.755.4 50B \

PAL750 110V PH/PAL750/110V 15106 49015.8 30020.7511 50B \

A versatile, portable, submersible, residue pump for clean water. This pump features the ability to pump down to 1mm, therefore ideal for removing water from flat surfaces such as floors and flat-roofs.

Features:

– Cast iron construction and stainless steel outer casing

– Double mechanical seal

– For automatic operation see our PalPack range

– Power supply: Single phase 110V, 50Hz Single phase 230V, 50Hz Three Phase 400V, 50Hz

PRODUCT CODE

CABLE m

WEIGHT kg

PRICE £

FREE PASSAGE

mm


OUTPUT

mm inchkWamp

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/min

CURVE

3.7710280025 2407 9110.161.3 25 n/a n/aA \

1.5n/an/an/a 260n/a n/an/an/an/a n/a 15 1n/a

PZN/PAL/JNR/1

PZNS/11416

PRODUCT CODE

CABLE m

RPM WEIGHT kg

PRICE £

FREE PASSAGE

mm

DELIVERY STATUS

OUTPUT

mm inchkWamp

DISCHARGE T-T PROBEMATIC MAXIMUM

HEAD m

ON min

OFF min

CAPACITY l/min

CURVE

2” PUDDLE PUMP PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

16

14

12

10

8

6

4

2

0 0 50 100 150 200 250 300 350

A B

A

A

1” PUDDLE PUMP PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

8

7

6

5

4

3

2

1

0 0 16 33 50 66 83 100

A

Puddlepal Junior is a portable pump for emergency drainage, cellars, washhouses, pools, manholes and applications where water must be pumped out ‘completely’.

Features:

– The puddle sucker pump is a submersible drainage water pump, made of corrosion and shock resistant polypropylene and high-grade stainless steel

– Intake from 15mm and suction down to 1mm

– Motor winding with thermal winding protection mechanical seal and additional shaft seal

– In automatic mode with T-T Probematic, switch-on point approx. 25cm, switch-off point approx. 3mm vertical pressure outlet 1”MPT with hose connection DN 25

– Puddlepal Junior fits into a sump with an inner diameter larger than 200mm

– Protection grade IP 68 – fully submersible

– Integrated non-return valve to prevent backflow



The PalPack is a combination of a submersible dewatering pump, control unit and level detector for peace of mind dewatering.

The PalPack is available in two options, option one consists of the PuddlePal, PumpPal and LevelPal, this is suitable for applications where a standard level control is required.

Option two consists of the PuddlePal, PumpPal Pro and two LevelPal level detectors, this is suitable for an application where a high level alarm warning system is required.

PALPACK

PALPACK PRO 750 230V PH/PAL750/230WV2 16.2106 85515.8 30020.755.4 50B \

PALPACK 750 230V PH/PAL750/230WV 14.4106 77015.8 30020.755.4 50B \

PRODUCT CODE

CABLE m

WEIGHT kg

PRICE £

FREE PASSAGE

mm


OUTPUT

mm inchkWAMP

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/min

CURVE

PALPACK 400 110V PH/PAL400/110WV 14.4106 65011 22520.46 50A \

PALPACK 400 230V PH/PAL400/230WV 14.4106 65011 22520.43 50A \

PALPACK PRO 750 110V PH/PAL750/110WV2 16.2106 85515.8 30020.7511 50B \

PALPACK PRO 400 110V PH/PAL400/110WV2 16.2106 73511 22520.46 50A \

PALPACK 750 110V PH/PAL750/110WV 14.4106 77015.8 30020.7511 50B \

PALPACK PRO 400 230V PH/PAL400/230WV2 16.2106 73511 22520.43 50A \

A

46



Medium duty layflat hose, available in the following sizes:

1”, 11/4”, 11/2”, 2”, 3”, 4”, 6”, 8”

With our conversion kits, you can convert a Liberator to a Puddlepal or a Puddlepal to a Liberator, therefore providing one pump for two applications.

LAYFLAT HOSE A

PRODUCT SIZE WORKING PRESSURE

bar

STOCK CODE

CABLE C

PRODUCT PUMP MODELS SUITABLE FOR

SIZE m

STOCK CODE

TRENCHER 400 110V

TRENCHER 400 400V

TRENCHER 1500 400V

LIBERATOR 1500 400V

TRENCHER 1500 110V

LIBERATOR 1500 110V

TRENCHER 1500 230V

LIBERATOR 1500 230V

TRENCHER 750 400VLIBERATOR 400 400V

LIBERATOR 750 400VPUDDLEPAL 400 400V

PUDDLEPAL 750 400V

TRENCHER 400 230V

TRENCHER 750 110V

TRENCHER 750 230V

LIBERATOR 400 110V

LIBERATOR 400 230V

LIBERATOR 750 110V

LIBERATOR 750 230VPUDDLEPAL 400 110V

PUDDLEPAL 400 230V

PUDDLEPAL 750 100V

PUDDLEPAL 750 230V

PHS/CABLE – 2

PHS/CABLE – 3

PHS/CABLE – 4

PHS/CABLE – 5

PHS/CABLE – 6

CABLE AND GLAND

CABLE AND GLAND

CABLE AND GLAND

CABLE AND GLAND

CABLE AND GLAND

10

10

10

10

10

35

45

60

60

80

PRICE £

PRODUCTSTOCK CODE

PHS/PAL400-LB400 75

PHS/LB400-PAL400

PHS/T400POS.16

75

40

CONVERSION KIT PAL400 – LB400

CONVERSION KIT LB400 – PAL400

CONVERSION KIT T400 – T400PAL

CONVERSION KIT C

PRICE £

PRICE PER

METER £

mm inch

LAYFLAT HOSE 3 2HU/25LF 25 1

LAYFLAT HOSE 3 2.10HU/32LF 32 11/4

LAYFLAT HOSE 4 2HU/40LF 40 11/2

HU/50LF LAYFLAT HOSE 4 250 2

LAYFLAT HOSE 4 3.60HU/80LF 80 3


LAYFLAT HOSE 4 8.80HU/150LF 150 6




OUTPUT

inchkW mmamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY m3/h

CABLE m

WEIGHT kg

PRICE £

FREE PASSAGE

mm

PUMP TYPE

WATER 230V

OIL RESISTANT DIAPHRAGM & HOSE 230V

WATER 110V

OIL RESISTANT DIAPHRAGM & HOSE 110V

PZN/PM/W/230V

PZN/PM/0/230V

PZN/PM/W/110V

PZN/PM/0/110V

1500

1600

1500

1600

28

24.5

28

24.5

10

10

10

10

312

312

15

15

312

312

15

15

250.151.2

250.151.2

250.153.8

250.153.8

A \

A \

A \

A \

1

1

1

1

DELIVERY STATUS

PRODUCT CODE

WEIGHT kg

PRICE £


FULL SYSTEM

PUMP

FLOODBUDDY 110V/1Ph PZNS/FLOODBUD1 148 560

FLOODBUDDY 230V/1Ph PZNS/FLOODBUD/2 148 560

CABLE m

OUTPUT

mm inchkWamp

DISCHARGE MAXIMUM

HEAD m

CAPACITY m3/h

CURVE

1014 9.520.43.7 50A \

10

FREE PASSAGE

mm

10

1014 9.520.47.4 50A \

The FloodBuddy® is a submersible emergency dewatering kit, consisting of a stainless steel pump with built-in level switch, check valve, mounting bracket, 10m cable and 10m hose.

Features:

– Stainless steel pump with built-in level switch

– Integrated check valve and mounting bracket

– 10m cable

– 10m hose with quick release coupling set

– Transport box with 8x8mm holes as protection against coarse solids

– Pump may be used outside of the box

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

16

14

12

10

8

6

4

2

0 0 0.5 1 1.5 2 2.5 3 3.5 4

A

A

B

The PuddleMate® is a mobile diaphragm pump with 1” suction and discharge hoses of 3.5 metres. It is a portable plug and play product and is resistant to abrasive waste such as small stones, sludge and leaves.

Features:

– Universal application through five interchangeable suction nozzles

– Available in two options: Puddlemate® for water and Puddlemate® for oil contaminated water (oil resistant diaphragm and hoses)

– Robust and durable

– Portable plug and play product

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

16

14

12

10

8

6

4

2

0 0 40 80 120 160

48



T-T505C is a fully submersible de-watering pump for clean or silty water. This pump is robust and features the main components in aluminium alloy making this pump ideal for the toughest of conditions.

Features:

– Cast aluminium construction


Note: All single phase 110V and 230V versions come with external capacitor supplied loose. Control panels can be supplied upon request.

TT505CPERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

16

14

12

10

8

6

4

2

0 0 2 4 6 8 10 12 14 16

A

B

OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

CABLE m

WEIGHT kg

PRICE £

FREE PASSAGE

mm


TT505C 110V/1Ph PE/TT505C/2 341010 180015 1631.2520A \ 80

TT505C 230V/1Ph PE/TT505C/1 341010 180015 1631.259.6A \ 80

TT505C 400V/3Ph PE/TT505C/3 341010 180015 1631.252.6A \ 80

EXTRAS

DELIVERY STATUS

PRODUCT TYPE TT505C TROLLEY

PRODUCT CODE PES/TT505C-TROL

PRICE £ 300



50


Compact design, high performance and exceptional durability for handling abrasive liquid, widely used in general construction and civil engineering. Pumps designed for continuous operation.

Features:

– Capacity: up to 150m3/h

– Head: up to 48m

– Power: 1.5kW to 11kW

– Power supply: Three phase 400V-50Hz

Single phase 230V-50Hz

– Insulation class: F

– Protection class: IP68

– Motor temperature: 40°C

– Maximum water depth: 25m

KTS RANGEPERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

50

40

30

20

10

0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

B

A B

C

DF H G

E

I

J

K ML

HEAD m

CAPACITY m3/h

MAXIMUM FREE PASSAGE

mm

DISCHARGECURVEPRODUCT CODE

PRICE £

WEIGHT kg


OUTPUT

kW inchamp

KTSM – Single Phase. KTS – Three Phase.

27 8.5KTSM 50 1.5 PO/KTS50-1.5M 1000371.5 210

40 8.5KTSM 80 1.5 PO/KTS80-1.5M 1000371.5 310

27 8.5KTS 50 1.5 PO/KTS50-1.5 1000391.5 2A \

A \

3.5

40 8.5KTS 80 1.5 PO/KTS80-1.5 1000391.5 3B \

B \

3.5

27 8.5KTS 50 2.2 PO/KTS50-2.2 1150422.2 2C \ 5

48

29

8.5

8.5

KTS 80 2.2

KTS 50 3.7

PO/KTS80-2.2

PO/KTS50-3.7

1150

1700

42

42

2.2

3.7

3

2

D \ 5

22

14.5

22

14.5

26

21

34

mm

50

80

50

80

50

80

50

CABLE LENGTH

m

15

15

15

15

15

15

15

55 8.5

8.5

KTS 80 3.7

KTS 100 3.7

PO/KTS80-3.7

PO/KTS100-3.7

1700

1700

60

60

3.7

3.7

3

4

E \F \G \

7.7

7.7

7.7

29

18

80

100

15

15

70

90

8.5KTS 80 5.5 PO/KTS80-5.5 1850685.5 3H \ 11.4 3280 15

105 8.5KTS 100 5.5 PO/KTS100-5.5 1850695.5 4I \ 11.4 23100 15

88 11.5 2900KTS 100 7.5 PO/KTS100-7.5 1087.5 4J \ 15 42100 15

130 19.5KTS 150 7.5 PO/KTS150-7.5 29001107.5 6K \ 15 33150 15

86.4 11.5KTS 100 11 PO/KTS100-11 3800123L \ 11 422 48100 15

34 150 19.5 380022KTS 150 11 PO/KTS150-11 125M \ 11 150 6 15


KTSE OPERATION

THE PROCESS IS REPEATED

1 2 3 4

The pump continually runs while the electric probe remains submerged.

When the water surface falls below the electric probe, the timer starts (for approximately 60 seconds).

The pump stops as long as the water level stays below the electric probe.

When the water level rises and comes into contact with the electric probe, the pump starts operating again.

If the water capacity of the sump/pit is small, in order to avoid rapid start/stop operations, a ball check valve should be installed at the discharge of the pump. The electric probe should also be positioned as far up the pump as possible.

Liquid level probe splint

Submersible drainage pump with built in level control probe. The design has improved motor cooling due to the discharge channel being part of the motor housing, allowing the range to pump at low levels for long periods.

The probe automatically starts and stops the pump operation to maximise efficiency and reduce power consumption.

– Protect against reverse phase, ensuring correct impeller rotation

– Protect against open phase or impeller jam, thus prevent accidental damage

– Automatically stops the pump in event of overload, abnormal voltage and resets 5 minutes later

– The water sensor’s height is adjustable to control pump operation start and stop

Features:


– Head: up to 48m



Single phase 230V-50Hz

KTSEPERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

50

40

30

20

10

0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160

A BCE

D F H IG KML

J

OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

CABLE m

WEIGHT kg

PRICE £

FREE PASSAGE

mm


KTSE 21.5

KTSE 32.2

KTSE 43.7

KTSE 47.5

PO/KTSE50-1.5

PO/KTSE80-2.2

PO/KTSE100-3.7

PO/KTSE100-7.5

39

67

46

129

10

10

10

10

8.5

8.5

8.5

11.5

1250

1950

1400

3150

21

18

18.5

41

30

95

55

88

2

4

3

4

3.5

7.7

5.0

15

1.5

2.2

7.5

3.7

A \

D \

G \

K \

50

100

80

100

KTSE 31.5

KTSE 23.7

KTSE 35.5

KTSE 67.5

PO/KTSE80-1.5

PO/KTSE50-3.7

PO/KTSE80-5.5

PO/KTSE150-7.5

43

74

66

142

10

10

10

10

8.5

8.5

8.5

19.5

1250

2100

1950

3150

14

35

32

32

42

72

36

130

3

3

2

6

3.5

11.4

7.7

15

22

1.5

3.7

7.5

11

5.5

B \

E \

H \

L \

80

80

50

150

KTSE22.2

KTSE 33.7

KTSE 45.5

KTSE 411

KTSE 611

PO/KTSE50-2.2

PO/KTSE80-3.7

PO/KTSE100-5.5

PO/KTSE100-11

PO/KTSE150-11

46

75

66

129

157

10

10

10

1010

8.5

8.5

8.5

11.5

18.5

1400

2100

1950

4050

4050

25

23

29

48.534

32

105

60

86.4

150

2

4

3

46

5.0

11.4

7.7

22

2.2

3.7

11

5.5

C \

F \

J \I \

M \

50

100

80

100150

BENERGYSAVING







KT SAND DEVILCompact design, high performance and exceptional durability for handling abrasive liquid, widely used in general construction and civil engineering. Pumps designed for continuous operation.

Features:

– Cast iron construction with high chrome impeller and agitator








PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

40

30

20

10

0 0 50 100 150 200 250 300 350

AB

C D

E

F

G

H JL

KI

HEAD m

CAPACITY m3/h

MAXIMUM FREE PASSAGE

mm

DISCHARGECURVEPRODUCT CODE

PRICE £

WEIGHT kg


OUTPUT

kW inchamp

75 20KTSD 80 2.2 PO/KTSD80-2.2 1900792.2 35.0

85 20KTSD 80 3.7 PO/KTSD80-3.7 2400893.7 38.5

140 30KTSD 100 5.5 PO/KTSD100-5.5 32002365.5 4C \

A \

11.7

160 30KTSD 100 7.5 PO/KTSD100-7.5 39002457.5 4D \

B \

15.7

190 35KTSD 100 11 PO/KTSD100-11 540026011 4E \ 22

220 35KTSD 150 11 PO/KTSD150-11 560026911 6F \ 22

13

16

16

19

24

24

mm

80

80

100

100

100

150

CABLE LENGTH

m

10

10

10

10

10

10

220 35KTSD 100 15 PO/KTSD100-15 610014115 4G \ 30.1 30100 10

255 35KTSD 150 15 PO/KTSD150-15 630015615 6H \ 30.1 30150 10

330 35KTSD 150 18.5 PO/KTSD150-18.5 740034218.5 6I \ 38 30150 10

330 35 7600KTSD 200 18.5 PO/KTSD200-18.5 36118.5 8J \ 38 30200 10

330 35KTSD 150 22 PO/KTSD150-22 810035522 6K \ 45 35150 10

350 35KTSD 200 22 PO/KTSD200-22 8300374L \ 22 845 35200 10

B

Submersible pump with water cooled motor to ensure a long life in continuous and intermittent operation, with high efficiency and energy savings. For dewatering water transfer for drainage, irrigation and emergency pumping.Features:– Capacity: up to 108m3/h– Head: up to 31m– Power: 1.5kW to 5.5kW– Power supply: Three phase 400V - 50Hz– Insulation class: F– Protection class: IP68– Water temperature: up to 40°C– Max. water depth: 25m

KTC RANGE B

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

50

40

30

20

10

0 0 10 20 30 40 50 60 70 80 90 100 110

A B C D E

CURVE OUTLET mm

PRODUCT CODE

PRICE £

WEIGHT kg


OUTPUT

53

61

78

96

108

18.5

23

20

25.5

31

kW

KTC 80 1.5 PO/KTC80-1.5 105038.53.580

KTC 80 2.2 PO/KTC80-2.2 120041580

KTC 100 2.2 PO/KTC100-2.2 1250415C \

A \

100

KTC 100 3.7 PO/KTC100-3.7 1700607.5D \

B \

100

FREE PASSAGE

mm

10

10

10

10

10

CABLE LENGTH

m

15

15

15

15

15KTC 100 5.5 PO/KTC100-5.5 21006711.4E \

1.5

2.2

2.2

3.7

5.5100

amp

MAXIMUM

HEAD m

CAPACITY m3/h

52



KTA/S RANGE B

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

20

18

16

14

12

10

8

6

4

2

0 0 15 30 45 60 75 90 105 120

A

B

C

Submersible slurry pump with 4-pole motor for increased lifetime and greater convenience. High chrome alloy impeller combined with agitator for pumping heavy slurry. For pumping sludge, and liquids containing mud, sand and bentonite.Features:– Capacity: up to 107m3/h– Head: up to 15m– Power: 2.2kW to 3.7kW – Power Supply: three phase 400V - 50Hz– Insulation class: F– Protection class: IP68– Water temperature: up to 40°C– Max. water depth: 20m

CABLE LENGTH

m

FREE PASSAGE

mm

CURVE OUTLET mm

PRODUCT CODE

PRICE £

WEIGHT kg


OUTPUT

kWamp

1520KTA/S 80 2.2 PO/KTAS80-2.2 2700922.2 12 725.580

1520KTA/S 80 3.7 PO/KTAS80-3.7 30001083.7 15 86.48.180

1520KTA/S 100 3.7 PO/KTAS100-3.7 3000108C \

A \

3.7 15 1148.1100

B \

MAXIMUM

HEAD m

CAPACITY m3/h


HEA

D / m

HEA

D / m

CAPACITY / m3/h CAPACITY / m3/h

40

30

20

10

0

40

30

20

10

0 0 10 20 30 40 50 60 70 80 90 100 0 40 80 120 160 200 240 280 320 360 400

AE

B

GC FD

H I

Submersible slurry pump with a 2 and 4-pole motor for an increased lifetime and easy maintenance. High chrome impeller combined with agitator for pumping heavy slurry, with it’s slim design and top discharge enabling installation in tight spaces, for example bentonite mixed water in foundation works or muddy / sandy water in civil engineering works.Features:– Capacity: up to 372m3/h– Head: up to 32m– Power: 1.5kW to 22kW – Power supply: three phase 400V - 50Hz

– Insulation class: F– Protection class: IP68– Water temperature: up to 40°C– Max. water depth: 15m

KTA RANGE B

OUTLET mm

MAXIMUM CABLE LENGTH

m

FREE PASSAGE

mm

CURVEPRODUCT CODE

PRICE £

WEIGHT kg


OUTPUT

kW

30 1510KTA 50 1.5 PO/KTA50-1.5 150037201.53.550A \

60 1510KTA 80 3.7 PO/KTA80-3.7 23006930C \ 3.77.780

30 1510KTA 50 2.2 PO/KTA50-2.2 180040252.2550B \

90 1510KTA 100 4.7 PO/KTA100-4.7 23007018D \ 4.77.7100

99 1530KTA 80 4 PO/KTA80-4 3800108.514.8E \ 410.280

144 1530KTA100 6 PO/KTA100-6 440014116.9F \ 613.8100

192 1530KTA 150 9 PO/KTA150-9 500017121.5G \ 919.5150

372 1530KTA 200 15 PO/KTA200-15 850026022H \ 1530.1200

360 1530KTA 200 22 PO/KTA200-22 990040832I \ 2242200

amp HEAD m

CAPACITY m3/h

2900

RPM

2

POLE

1400

RPM

4

POLE



KTH/S RANGESubmersible pump featuring double mechanical seals and chrome plated shaft to ensure high corrosion and wear resistance.The hydraulic part under the motor is cooled by the pumped water for safe operation by the pumped water for safe operation, with pump only partially immersed. Suitable for dewatering and water transfer applications, as well as irrigation.

Features:– Capacity: up to 90m3/h– Head: up to 142m– Power: 2.2kW to 25kW– Power supply: Three phase 400V - 50Hz– Insulation class: F– Protection class: IP68– Cable length: 15m– Water temperature: up to 40°C– Max. water depth: 20m

B


HEA

D / m

HEA

D / m

CAPACITY / m3/h CAPACITY / m3/h

100

90

80

70

60

50

40

30

20

10

0

160

140

120

100

80

60

40

20

0 0 10 20 30 40 50 0 10 20 30 40 50 60 70 80 90 100 110

OUTLET mm

PRICE £

WEIGHT kg

28

28

30

32

42

50

50

90

90

90

5.4

7.2

8.8

11.7

15.7

22

31

31

37.2

51

38

51

57

67

84

106

142

90

108

123

2.2

3

4

5.5

7.5

11

15

15

18.5

25

CABLE LENGTH

mm

15

15

15

15

15

15

15

15

15

15

FREE PASSAGE

mm

6

6

6

6

6

6

6

8

8

10

PUMP TYPE

KTHS 50 (2) 10-2.2

KTHS 50 (3) 10-3

KTHS 50 (3) 12.5-4

KTHS 50 (3) 15-5.5

KTHS 50 (4) 25-7.5

KTHS 65 (3) 20-11

KTHS 65 (4) 20-15

KTHS 80 (3) 40-15

KTHS 80 (3) 40-18.5

KTHS 100 (3) 60-25

PRODUCT CODE

PO/KTHS50-2.2

PO/KTHS50-3

PO/KTHS50-4

PO/KTHS50-5.5

PO/KTHS50-7.5

PO/KTHS65-11

PO/KTHS65-15

PO/KTHS80-15

PO/KTHS80-18.5

PO/KTHS100-25

1800

2000

2600

2800

3500

3900

5300

5300

6500

7600

53

62

67

75

92

178

210

206

225

263

DELIVERY STATUS

50

50

50

50

50

65

65

80

80

100

CURVE

A \

B \

C \

D \

E \

F \

G \

H \

I \

J \

A

B

C

D E

F

G

H

I

J

amp kW

OUTPUT MAXIMUM

HEAD m

CAPACITY m3/h





55

KTH RANGESubmersible drainage pump made of cast iron for long-lasting durability. High maximum submersion depth due to double mechanical seal, resistant to high pressure. Suitable for civil engineering and construction works, as well as mines and quarries.Features:– Capacity: up to 390m3/h– Head: up to 177m– Power: 22kW to 75k– Power Supply: three phase 400V - 50Hz– Insulation class: F– Protection class: IP68– Cable length: 20m– Water temperature: up to 40°C– Max. water depth: 30m

CABLE LENGTH

mm

PRICE £

WEIGHT kg


FREE PASSAGE

mm

PRODUCT CODE

amp

CURVE

kW

OUTLET mm

200

175

130

223

223

223

330

372

192

198

330

390

41.5

54

41.5

54

66

80

66

80

98

132

98

132

50

78

68

58

83

90

48

53

105

130

65

70

20KTH 150 22 22000385

20

20

KTH 100 30

KTH 100 22

9500

8000

375

370

20KTH 150 30 8000390

20KTH 150 37 9500570

20KTH 150 45 12500575

20KTH 200 37 14900575

20KTH 200 45 25800580

20

20

20

20

15

8

6

15

6

6

20

20

8

8

20

20

KTH 150 55

KTH 150 75

KTH 200 55

KTH 200 75

PO/KTH150-22

PO/KTH100-30

PO/KTH100-22

PO/KTH150-30

PO/KTH150-37

PO/KTH150-45

PO/KTH200-37

PO/KTH200-45

PO/KTH150-55

PO/KTH150-75

PO/KTH200-55

PO/KTH200-75

12500

14900

22000

25800

830

830

830

880

B \

A \

C \D \E \F \G \H \I \J \K \L \

22

30

22

30

37

45

37

45

55

75

55

75

150

100

100

150

150

150

200

200

150

150

200

200

B

OUTPUT MAXIMUM

HEAD m

CAPACITY m3/h

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

180

160

140

120

100

80

60

40

20

0 0 25 50 75 100 125 150 175 200 225 250

DEA

F

B C

I

J

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

110

100

90

80

70

60

50

40

30

20

10

0 0 50 100 150 200 250 300 350 400 450 500

G

KH

L

150

360

180

390

162

162

198

198

155

90

177

107

20

20

20

20

10

20

10

20

KTH 150 90

KTH 200 90

KTH 150 110

KTH 200 110

PO/KTH150-90

PO/KTH200-90

PO/KTH150-110

PO/KTH200-110

P.O.A.

P.O.A.

P.O.A.

P.O.A.

1100

1120

1130

1150

M\N \O \P \

90

90

110

110

150

200

150

200

M

O

P

N


SP21 (ATEX)

56


A high-performance water pump with hydraulic motor designed for pumping clear and muddy water with suspended solids with dimensions up to 20mm. The hydraulic functioning assures high power, safety resistance to abrasive liquids and the possibility to run dry. Thanks to its robust design and long operative life, the WP25 is ideal in professional use, maintenance of utility networks, dewatering, civil protection and road maintenance works.

With implicit safety thanks to the absence of electricity, and capability of handling thick and muddy liquids these pumps can be powered by small power packs, mini excavators, and trucks making them ideal for the construction industry.

Features:

– Head up to 45m

– Possibility to run dry without damages

– Robust construction and minimal maintenance needs

– Implicit safety thanks to the absence of electricity, zero problems of priming

– The pumping chamber can be open in a few seconds for inspection and cleaning

WP25PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

45

40

35

30

25

20

15

10

5

0 0 200 400 600 800 1000 1200 1400 1600

A - 30l/min A - 38l/min

C

C

mm inch

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/min

WEIGHT kg

PRICE £

FREE PASSAGE

mm

FREE PASSAGE

mm

PUMP TYPE

WP25 PD/TT-WP25 9.520 225045 16002.5A \ 65

DELIVERY STATUS

mm inch

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/min

WEIGHT kg

PRICE £

PUMP TYPE

SP20 PD/TT-SP20 8.0 195035 800 302A \ 50

DELIVERY STATUS

SP20 and SP21 (ATEX) are compact and powerful hydraulic trash pumps with unbeatable power, size and weight ratios. With their robust construction, they require minimal maintenance and have the possibility to run dry without damages.


Designed to withstand high resistance to impacts and abrasivity, and with its small dimensions and lightweight construction, it makes it an ideal option for the smallest of applications including trenches and manholes.

Features:

– Stainless steel pump body

– Cast iron impeller

– Flow capacity up to 800 l/min

– Head up to 35m (water pressure 3.5 bar)

SP20 / SP21 (ATEX)PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

40

30

20

10

0 0 100 200 300 400 500 600 700 800 900

A

SP21 PD/TT-SP21 8.0 350035 800 302A \ 50

SP20



57

SP35 / SP45High performance 3” and 4” submersible trash water pumps.

The SP35 pump has a stainless steel impeller and body, with an exclusive single channel closed impeller and has the ability to pump very abrasive fluids and bentonite. The pump is available with hydraulic motor in cast iron and with ATEX certification for pumping flammable liquids or for uses in mines or explosive applications.

SP45 is a professional trash pump designed for pumping slurries, trash waters and thick liquids with density concentration in the fluid up to 25% and suspended solids with dimensions up to 70mm.

The pump body is fabricated in stainless steel with urethane wear plate, designed to ensure durability, and resistance to abrasivity, impacts and rust. The pump is ideal in large movements of water, in emergencies after floods, in military works, for sewage treatment facilities, manhole dewatering.

Features:

– Head SP35: up to 40m, SP45: up to 17m

– Possibility to run dry without damages

– Robust construction and minimal maintenance needs

– Implicit safety thanks to the absence of electricity, zero problems of priming

– The pumping chamber can be open in a few seconds for inspection and cleaning

SP35 SP45

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

45

40

35

30

25

20

15

10

5

0 0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000

A – 20l/min

B – 30l/min

A – 30l/min

B – 38l/min

C

SP55 and SP65 are high-performance trash pumps ideal for use in large dewatering works, rental activity, civil protection and military sector, sewage treatment plants and where it is necessary to move quickly large volumes of water and heavy loaded fluids.

The pumps’ main characteristics are their high power and impeller which has knives that can cut suspended solids like sea weeds, straw, rags, ropes, sediments and various linear fibres. The hydraulic functioning gives a long series of operation and performance.


Features:

– Head SP55: up to 29m, SP65: up to 39m

– Stainless steel pump body

– Steel impeller

SP55 / SP65

SP55 SP65

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

40

35

30

25

20

15

10

5

0 0 1000 2000 3000 4000 5000 6000 7000 8000

A – 40l/min B – 60l/min

B – 80l/min B – 100l/min

A – 60l/minA – 50l/min

C

FREE PASSAGE

mmmm inch

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/min

WEIGHT kg

PRICE £

PUMP TYPE

SP35 PD/TT-SP35 17.0 300040 1900 503A \ 80

DELIVERY STATUS

SP45 PD/TT-SP45 28.0 330017 3000 704B \ 100

FREE PASSAGE

mmmm inch

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/min

WEIGHT kg

PRICE £

PUMP TYPE

SP55 PD/TT-SP55 95 900029 5500 555A \ 125

DELIVERY STATUS

SP65 PD/TT-SP65 135 1100039 8000 656B \ 150


58


The Pontoon has been engineered to be a versatile and compact floatation device for de-watering, utilising submersible or engine driven pumps. Constructed in Marine grade foam filled polyethylene with UV15 protection, with 304 stainless steel straps and fittings to maximise durability.

The range is available in two options, one suitable for submersible pumps and one for surface mounted pumps. Each unit comes supplied with lifting certificate for peace of mind that the flotation device can hold the weight

Features:

– Comes with chain (for submersibles only)

– Maximum buoyancy for single unit: 160kg

– Certified lifting capacity: 250kg (can be increased)

– UV15 protection

– Pumps easily mounted on site

– Lifting points for easy installation

– 304 stainless steel lifting frame (316 option available upon request)

– Modular design to increase load capacity (max. of 4 units together).

DIMENSIONS mm

PRODUCT CODEMODEL

PONTOON SUBMERSIBLE TT/PONTOON/SUB 1300 x 1100 x 450

DELIVERY STATUS

PONTOON SURFACE MOUNTED TT/PONTOON/SURF 1300 x 1100 x 450

PRICE £

1200

1300

PUMP MOUNTING

SUBMERSIBLE PUMP

SURFACE MOUNTED PUMP

1300mm

470mm 1100mm350mm450mm

C

REPLACEMENT FIXING BRACKET KIT - SUBMERSIBLE TT/PONTOON/CLAMP - 500-

REPLACEMENT FIXING BRACKET KIT - SURFACE MOUNTED TT/PONTOON/STRAP - 600-


www.ttpumps.com / T: +44 (0) 1630 647200

SECTION 04 ENGINE DRIVEN PUMPS

HORSE POWER

hp

HORSE POWER

hp mm inch

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY lpm

ENGINE TYPE

PRICE £

WEIGHT kg

FREE PASSAGE

mm

PUMP TYPE

SCR-254HX

SCR-50HX

SCR-80HX

PA/SCR-254HX

PA/SCR-50HX

PA/SCR-80HX

390

490

580

6.0

23.5

30.0

HONDA PETROL 4-S

HONDA PETROL 4-S

HONDA PETROL 4-S

5

5

5

150

500

1050

35

27

27

25

50

80

1.1

4.0

5.5

A \

B \

C \

1

2

3

DELIVERY STATUS

mm inch

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY lpm

ENGINE TYPE

PRICE £

WEIGHT kg

FREE PASSAGE

mm

PUMP TYPE

SST-50HX

SST-80HX

PA/SST-50HX

PA/SST-80HX

690

850

24.0

27.0

HONDA PETROL 4-S

HONDA PETROL 4-S

20

20

800

1300

26

30

50

80

4.0

5.5

A \

B \

2

3

DELIVERY STATUS

SCR-254HX

60

04 – ENGINE DRIVE PUMPS

SCR RANGEThese powerful pumps are lightweight in construction with a combination of aluminum for the outer casing and cast iron for the impeller and wear plate. A mechanical seal ensures perfect shaft sealing and combined with their robust design means they require the absolute minimum of maintenance.

Features:

– Suitable for clean and grey water

– Excellent self-priming

SST RANGE – SEMI TRASHThe powerful SST range of engine driven pumps are lightweight in construction with a combination of aluminium for the outer casing and cast iron for the impeller and wear plate.

SST pumps are constructed for grey and trash water with solids up to 20mm.

Features:

– Easy maintenance

– Lightweight

– Heavy duty construction


PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

40

30

20

10

0A B C

0 200 400 600 800 1000 1200 1400 1600 1800

SCR-80HXSCR-50HX

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

30

20

10

0 0 200 400 600 800 1000 1200 1400

A B

A

B

SST-80

SST-50


The powerful SWT range of engine driven pumps are lightweight in construction with a combination of aluminium for the outer casing and cast iron for the impeller and wear plate. SWT pumps are heavy duty trash and slurry pumps designed for solids handling up to 35mm, and feature simple access to pump casing, making cleaning and maintenance easy.

Features:

– Excellent solids handling

– Easy maintenance

– Lightweight


– Optional trolley frame

– 5.3 litre tank

04 – ENGINE DRIVE PUMPS

SWT RANGE – TRASH

SMD RANGE – DIAPHRAGM PUMPSHeavy duty engine driven self-priming diaphragm pump range utilising a genuine Honda engine. Available in two sizes 2” and 3”.

Features:

– Compact design and lightweight

– Pump body and gear case are made by heavy-duty die cast aluminium, to keep the weight down for easy transport between job sites

– Easy Maintenance

– Capable of running dry without damage

61

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

30

20

10

0 0 200 400 600 800 1000 1200 1400

A B

PERFORMANCE DATA

HEA

D / m

Q / m3/h

20

15

10

5

0 0 7.6 15.2 22.8 30.4

A B

SWT-80H

SWT-50H

HORSE POWER

hp mm inch

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY lpm

ENGINE TYPE

PRICE £

WEIGHT kg

FREE PASSAGE

mm

PUMP TYPE

SWT-50H

SWT-80H

PA/SWT-50HX

PA/SWT-80HX

1300

1750

34

57

HONDA PETROL 4-S

HONDA PETROL 4-S

25

35

800

1300

26

30

50

80

5.5

8.0

A \

B \

2

3

DELIVERY STATUS

HORSE POWER

hp mm inch

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY m3/h

ENGINE TYPE

PRICE £

WEIGHT kg

FREE PASSAGE

mm

PUMP TYPE

SMD50

SMD80

PA/SMD-50HX

PA/SMD-80HX

1800

1980

37.5

45

HONDA PETROL 4-S

HONDA PETROL 4-S

25

35

8.6

17.2

17.5

17.5

50

80

4.0

5.5

A \

B \

2

3

DELIVERY STATUS

SMD 80HX

SMD 50HX

B

A


62

NOTES


www.ttpumps.com / T: +44 (0) 1630 647200

SECTION 05 AGRICULTURAL & ENVIRONMENTAL

FEATURING BIOGAS

mm inch

INLET x OUTLET

T-T FARM WASHA range of powerful washdown sets suitable for general farm use and washing. A full kit comprising of a pump mounted on a stainless steel base complete with auto-stop/start, hose, fittings and an adjustable nozzle.

Features:

– Heavy duty robust design

– Compact

– Heavy duty stainless steel base

– Automatic stop / start

– Dry run protected

– Heavy duty adjustable brass nozzle

– 25 metre high quality hose

– Custom built versions available

B

CURVEPRODUCT CODE

PRICE £


OUTPUT

amp kW

PRESSURE bar

FARM WASH 1 230V/1Ph PF/TTPW1 850A \ 1.9 – 3.732 x 25 11/4 x 10.754.8

FARM WASH 2 230V/1Ph PF/TTPW2 1325B \ 3.6 – 5.140 x 32 11/2 x 11/4

FLOW RATE m3/h

1 – 7

5 – 112.212.4

PERFORMANCE DATA

HEA

D / m

Q / m3/h

56

48

40

32

24

16

8

0 0 2 4 6 8 10

A

B

05 – AGRICULTURAL / ENVIRONMENTAL



SCUM SKIMMERDesigned to be a combination of sustainable, efficient and reliable collection method of collecting scum from liquid. Ideal for a variety of domestic, industrial and environmental applications. This range offers an effective method of collecting scum and floating matter from liquid surfaces, having the mobility to be guided into areas where skimming is most necessary.

Features:

– AISI 304 stainless steel & reinforced plastic construction

– Up to 30mm free passage

– 0.15kW, 0.25kW and 1.25kW electric motor

– Ø50mm discharge connection

– Electrical variants 110V/1Ph or 230V/1Ph (both 50Hz) (Scum-Skimmer Junior)

– Electrical variants 230V/1Phy or 400V/3Ph (both 50Hz) Scum-Skimmer Senior)

C

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

12

10

8

6

4

2

0

0 5 10 15 20 25

A B

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

14

12

10

8

6

4

2

0 0 5 10 15 20

C

Scum-Skimmer Junior

Scum-Skimmer Junior

Scum-Skimmer Senior

Scum-Skimmer Senior

WEIGHTkg

PUMP TYPE PRODUCTCODE

OUTPUT kW


PRICE £

SCUM-SKIMMER 150 JUNIOR WITH GOLIATH

SUPER 150 PUMPTT/SS-150JNR 0.15 19A \ 1300

SCUM-SKIMMER 250 JUNIOR WITH GOLIATH

SUPER 250 PUMPTT/SS-250JNR 0.25 19B \ .1400

SCUM-SKIMMER SENIORWITH TT505 PUMP TT/SS-SNR 1.25 85C \ 2350

OUTLETmm

50

50

50

FREE PASSAGE

mm

30

30

15

Available with various pump selections for varying applications, please speak to our sales department for more information.

CABLEm

5

5

10

AGRICULTURAL / ENVIRONMENTAL – 05


66


C

Recommended for installation in active sludge plants, aerobic digesters, reservoirs and aquaculture in general, with a 2” (63mm) diameter for optimum performance. Greater diameter ensures that a larger surface area is in contact with liquid, reducing the possibility of coalescence.

Quick, convenient anchorage to the main pipe guarantees simple, economical plant construction.

Features:

– Durable heavy duty design

– Membrane EPDM LP, body PP GF30

– Connection 3/4” NPT

OXYTUBE

OPERATING FLOW RATE

nm3/hMIN

nm3/hMAX

CURVEPRODUCT CODE

PRICE £

WEIGHT kg

PUMP TYPE

TUBE 500

TUBE 750

TUBE 1000

PZS/9023.005

PZS/9023.006

PZS/9023.007

60

65

70

0.8

1.1

1.3

6

9

12

1

2

3

A \

A \

A \

DELIVERY STATUS

OXYGEN TRANSFER / M. SUBMERGENCE

SOTE

/ %

/m

AIRFLOW / Nm3/h

20

18

16

14

12

10

8

6

4

2

0 0 1 2 3 4 5 6 7 8 9 10 11 12

A


mba

r

AIRFLOW / Nm3/h

55

50

45

40

35

30

25

20 0 1 2 3 4 5 6 7 8 9 10 11 12

A

OXYPLATEHigh performance, membrane diffusers for municipal and industrial water treatment. Designed for installation in oxidation tanks in civil and industrial aeration systems, they are fitted with a perforated membrane to allow passage of fine or medium sized bubbles. Easy to install with either the whole diffuser or just the membrane being quickly replaced in an existing plant.

Features:

– Durable heavy duty design

– Membrane EPDM LP, body PP GF30

– Design flow 9” 2 – 10 Nm3/h, 12” 2 – 12 Nm3/h

– Connection 3/4” NPT


CURVEPRODUCT CODE

PRICE £

WEIGHT kg

PUMP TYPE

OXYPLATE 9”

OXYPLATE 12”

PZS/9023.002

PZS/9023.004

50

80

0.7

1.2

A \

B \

DELIVERY STATUS


SOTE

/ %

/m

AIRFLOW / Nm3/h

16

14

12

10

8

6

4

2

0 1 2 3 4 5 6 7 8 9 10

A

B


mba

r

AIRFLOW / Nm3/h

70

60

50

40

30

20

10 1 2 3 4 5 6 7 8 9 10

A

B

C


OUTPUT

mm inchkW

CURVE DISCHARGE CABLE m

PRICE £

WEIGHT kg

FREE PASSAGE

mm


PRODUCT CODE

amp

OXY 50 16510--

OXY 50 – OXY body, sliding flange and pipe guide

OXY 50 SYSTEM – OXY body, sliding flange, pipe guide and base

OXY JET 50 – ejector coupled to submersible electric pump

--- -PZ/9009.006 -

OXY 50 SYSTEM

OXY JET DGO 50/2

OXY JET DGO 75/2

OXY JET DGO 100/4

OXY JET DGO 100/2

OXY JET DGO 150/2

OXY JET DGO 200/2

OXY JET DRO 100/2

OXY JET DRO 150/2

OXY JET DRO 200/2

245

620

670

820

800

840

890

760

860

860

11.50

27.5

28

30.5

30

31.5

32.5

30.5

31.5

32.5

-

10

10

10

10

10

10

10

10

10

-

40

40

50

50

50

50

15

15

15

-

50

50

50

50

50

50

50

50

50

-

0.37

0.55

0.7

0.88

1.1

1.5

0.88

1.1

1.5

-

A \

B \

C \

D \

E \

F \

G \

H \

I \

-

2

2

2

2

2

2

2

2

2

PZ/7027.015

PZ/7029.004

PZ/7029.005

PZ/7029.009

PZ/7029.006

PZ/7029.007

PZ/7029.008

PZ/7029.001

PZ/7029.002

PZ/7029.003

-

1.1

1.4

2.2

2.3

2.5

3.6

2.3

2.7

3.6

The Oxygen series of ejectors is an advanced range of ejectors which give excellent oxygen transfer and which can accommodate many applications.

Features:





OXYGEN RANGE

67

C


AIR

INTA

KE /

kg/h

OXYG

EN T

RAN

SFER

SOT

R / k

g/h

DEPTH OF LIQUID / m DEPTH OF LIQUID / m

35

30

25

20

15

10

1.0

0.9

0.8

0.7

0.6

0.5

0.4 0 0.5 1.0 1.5 2.0 2.5 0 0.5 1.0 1.5 2.0 2.5

A

AB

BC

CD

D

E

E

F

F


AIR

INTA

KE /

Sm3 /h

OXYG

EN T

RAN

SFER

SOT

R / k

g/h

DEPTH OF LIQUID / m DEPTH OF LIQUID / m

45

40

35

30

25

20

15

2.0

1.6

1.2

0.8

0.4 0 0.5 1.0 1.5 2.0 2.5 3.0 0 0.5 1.0 1.5 2.0 2.5 3.0

G

GH

H

I

I

Oxygen Transfer SOTRAir Intake


OUTPUT

kWamp

CURVEPRODUCT CODE

RPM N

CAPACITY m3/h

CABLE m

PRICE £

WEIGHT kg


TBX 0.75/4N 400V/3Ph PCR/TBX0.75/4/3 1600211027914000.752.2A \

TBX 1.1/4N 400V/3Ph PCR/TBX1.1/4/3 165021.51036013801.12.8B \

TBX 2.2/6N 400V/3Ph PCR/TBX2.2/6/3 385048108769402.25.9D \

TBX 1.5/6N 400V/3Ph PCR/TBX1.5/6/3 370047.5106439251.54.2C \

TBX 3/6N 400V/3Ph PCR/TBX3/6/3 39505010106193538E \

4 PO

LE

MOT

OR6

POLE

M

OTOR

These submersible horizontal mixers, fully manufactured in AISI 316 stainless steel, are recommended for homogenizing processes in sewage treatment plants and applications in very corrosive liquids.

The design, construction and the use of propellers with a self-cleaning profile are a guarantee of durability and efficiency even in the most extreme utilisation conditions.

Features:

– 316 stainless steel construction

– Mechanical seal with twin lipseal on larger models

– Max. submergence depth 20m

– Max. solid content in liquid 8%

– Max. temperature of liquid 40°C

– pH 5-12

TBX MIXER RANGE

PERFORMANCE DATA

HEA

D / m

m

3

2

1

0

-1

-2

-3 0 2 4 6 8 10 12 14 16 18 20 22 24 26

A B C D E

C

OUTPUT

kWamp

MAXIMUM

RPM n

CAPACITY m3/h

CABLE m

PRICE £

WEIGHT kg

DELIVERY STATUS

6 PO

LE

MOT

OR4

POLE

M

OTOR

10500106101149032.31.54.2

12250107101359432.82.25.9

12000122101471634.136.4

16500125101625033.749.1

PUMP TYPE

AF 1.5/6

AF 2.2/6

AF 3/4

AF 4/4

AF 5.5/4N

PRODUCT CODE

PCR/AF1.5/6

PCR/AF2.2/6

PCR/AF3/4

PCR/AF4/4

PCR/AF5.5/4 17500150101780334.45.512.5

CURVE

A \

B \

C \

D \

E \

These horizontal submersible flow mixers are recommended for homogenizing processes in sewage treatment plants. The design, construction and the use of propellers with self-cleaning profile are guaranteed for long duration and efficiency, even in the most extreme utilisation conditions.

Features:


– Single mechanical seal with twin lipseal


– Max. solid content in liquid 8%

– Max. temperature of pumped liquid 40°C

– Superior planetary gearbox

AF FLOW MIXER SERIESPERFORMANCE DATA

HEA

D / m

m

8

6

4

2

0

-2

-4

-6

-8 0 5 10 15 20 25 30 35 40 45 50 55 60 65

A B C ED

C

68



CURVEPRODUCT CODE

CAPACITY m3/h

CABLE m

PRICE £

WEIGHT kg

RPM n


TBM 1.5/6N 400V/3Ph PCR/TBM1.5/6/3 275058.5109256434.2 1.5A \

TBM 5.5/4N 400V/3Ph PCR/TBM5.5/4/3 460011510326239112.5 5.5F \

TBM 2.2/6N 400V/3Ph PCR/TBM2.2/6/3 285060.5109408765.9 2.2B \

TBM 7.5/4N 400V/3Ph PCR/TBM7.5/4/3 4700121.510328325415.8 7.5G \

TBM 3/4 400V/3Ph PCR/TBM3.0/4/3 4000791032315816.4 3.0D \

TBM 11/4 400V/3Ph PCR/TBM11.0/4/3 675018510351397723.5 11.0I \

TBM 18.5/4N 400V/3Ph PCR/TBM18.5/4/3 725020410354688436 18.5K \

TBM 2.2/4 400V/3Ph PCR/TBM2.2/4/3 3900771032313335.3 2.2C \

TBM 9/4N 400V/3Ph PCR/TBM9.0/4/3 500012710328362819 9.0H \

TBM 4/4 400V/3Ph PCR/TBM4.0/4/3 4100811032021469.1 4.0E \

TBM 15/4N 400V/3Ph PCR/TBM15.0/4/3 695019910351533530 15.0J \

TBM 22/4 400V/3Ph PCR/TBM22.0 P.O.A.31710275916542 22.0L \

TBM 25/4 400V/3Ph PCR/TBM25.0 P.O.A.325102751013847 25.0M \

These horizontal submersible mixers are recommended for homogenizing processes in sewage treatment plants, slurry pits and digesters. The design, construction and the use of propellers with a self-cleaning profile are a guarantee of durability and efficiency, even in the most extreme utilisation conditions.

Features:

– Cast iron & stainless steel construction

– Double mechanical seal with oil bath

– 1.5 – 25kW output


– Max. solid content in liquid: 12%

– Max. temperature of liquid 40°C

– Coupled with 4 and 6 pole motor


– ATEX versions available

– Guide rail options

TBM MIXER RANGE

PERFORMANCE DATA

HEA

D / m

m

10

8

6

4

2

0

-2

-4

-6

-8

-10 0 10 20 30 40 50 60 70 80 90 100

D E F G H I J KL MA B C

C

6 PO

LE

MOT

OR4

POLE

M

OTOR

OUTPUT

kWamp

CURVEPRODUCT CODE

CAPACITY m3/h

CABLE m

PRICE £

WEIGHT kg

RPM n


TBMex 2.2/4 400V/3Ph PCR/TBMEX2.2/4/3 P.O.A.791032313335.3 2.2C \

TBMex 9/4 400V/3Ph PCR/TBMEX9/4/3 P.O.A.H \

TBMex 3/4 400V/3Ph PCR/TBMEX3/4/3 P.O.A.D \

TBMex 11/4 400V/3Ph PCR/TBMEX11/4/3 P.O.A.I \

TBMex 5.5/4 400V/3Ph PCR/TBMEX5.5/4/3 P.O.A.F \

TBMex 18.5/4 400V/3Ph PCR/TBMEX18.5/4/3 P.O.A.K \

TBMex 4/4 400V/3Ph PCR/TBMEX4/4/3 P.O.A.E \

TBMex 15/4 400V/3Ph PCR/TBMEX15/4/3 P.O.A.J \

TBMex 7.5/4 400V/3Ph PCR/TBMEX7.5/4/3 P.O.A.G \

OUTPUT

kWamp

ATEX VERSIONS

11810326239112.5 5.5

124.510328325415.8 7.5

811032315816.4 3.0

18910351397723.5 11.0

20810354688436 18.5

13010328362819 9.0

831032021469.1 4.0

20310351533530 15.0




Features:




– Auto coupling available


– Nitec (corrosion resistant) coating now available

– ATEX approved version available

– Available in cooling jacket version

PTS 65 – 150 SERIES

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

48444036322824201612840

0 20 40 60 80 100

O

A

B C

KE

G

F

NJ

H

MLID

C

PTS 80N SERIES PTS 100 – 150 SERIESPTS 65 SERIES

CPTS 40 A submersible chopper pump with multi-channel impeller and double chopping system.

Features:

– Automatic or manual versions available

– Horizontal or vertical configuration

– Available in single or three phase

OUTPUT

mm inchamp kW

CURVE DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

PRICE £

CABLE m

WEIGHT kg

FREE PASSAGE

mm


PTS 0.75-40 11901.9 109 246.2513.5400.75A \ 1.5

PTS 1.1-40 12502.5 109 247.217.5401.1B \ 1.5

PRODUCT CODE

PCR/PTS0.75-40

PCR/PTS1.1-40

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

181614121086420

0 1 2 3 4 5 6 7 8 9

B

A

5

7.3

400V230V




OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

CABLE m

PRICE £

WEIGHT kg


PCR/PTSEX7.5-65/3 670010

PCR/PTSEX9-65/3 690010

PCR/PTSEX11-65/3 780010

PCR/PTSEX2.2-80N 460010

PCR/PTSEX7.5-100/3

590010


PCR/PTSEX9-100/3

570010

PCR/PTSEX4-100/3

850010

PCR/PTSEX15-150/3

610010

PCR/PTSEX15-80N

830010


PCR/PTSEX11-150/3

590010

PCR/PTSEX5.5-100/3

870010

PCR/PTSEX18.5-150/3

810010

PCR/PTSEX18.5-80N

850010

A \

B \

C \

D \

E \

F \

G \

H \

I \

J \

K \

L \

M \

N \

O \

PTSEX 7.5-65 400V/3Ph

PTSEX 9-65 400V/3Ph


PTSEX 2.2-80N 400V/3Ph

PTSEX 7.5-100 400V/3Ph




PTSEX 15-150 400V/3Ph



PTSEX 11-150 400V/3Ph

PTSEX 5.5-100 400V/3Ph

PTSEX 18.5-150 400V/3Ph

PTSEX 18.5-80N 400V/3Ph

ATEX Version

1253322.3657.515.8 2.5

1303524.865919 2.5

1913628.8651123.5 2.5

742810.7802.25.3 3

1284514.71007.515.8 4

772712.9803.06.4 3

1334816.11009.019 4

88389.81004.09.1 4

2269218.615015.030 6

168.53238.98015.031.2 3

783014.7804.09.1 3

2138515.215011.023.5 6

12242121005.512.5 4

2299421.515018.536 6

1833945.58018.536.5 3

OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/sec

CABLE m

PRICE £

WEIGHT kg


PTS 7.5-65 400V/3Ph PCR/PTS7.5-65/3 5400125103322.3657.515.8 2.5

PTS 9-65 400V/3Ph PCR/PTS9-65/3 5600130103524.865919 2.5

PTS 11-65 400V/3Ph PCR/PTS11-65/3 6400191103628.8651123.5 2.5

PTS 2.2-80N 400V/3Ph PCR/PTS2.2-80N 370074102810.7802.25.3 3

PTS 7.5-100 400V/3Ph PCR/PTS7.5-100/3 4550128104514.71007.515.8 4

PTS 3-80N 400V/3Ph PCR/PTS3-80N 380077102712.9803.06.4 3

PTS 9-100 400V/3Ph PCR/PTS9-100/3 4700133104816.11009.019 4

PTS 4-100 400V/3Ph PCR/PTS4-100/3 39008810389.81004.09.1 4

PTS 15-150 400V/3Ph PCR/PTS15-150/3 7050226109218.615015.030 6

PTS 15-80 400V/3Ph PCR/PTS15-80N 7600168.5103238.98015.031.2 3

PTS 4-80N 400V/3Ph PCR/PTS4-80N 390078103014.7804.09.1 3

PTS 11-150 400V/3Ph PCR/PTS11-150/3 6850213108515.215011.023.5 6

PTS 5.5-100 400V/3Ph PCR/PTS5.5-100/3 44501221042121005.512.5 4

PTS 18.5-150 400V/3Ph PCR/PTS18.5-150/3 7200229109421.515018.536 6

PTS 18.5-80 400V/3Ph PCR/PTS18.5-80N 7800183103945.58018.536.5 3

A \

B \

C \

D \

E \

F \

G \

H \

I \

J \

K \

L \

M \

N \

O \

ATEX VERSIONS



PERFORMANCE DATA

CAPACITY / l/sec

0 40 80 120 160 200

OUTPUT

mm inchkWamp


HEAD m

CAPACITY l/sec

CABLE m

FREE PASSAGE

mm

PRICE £

WEIGHT kg


PRODUCT CODE

PTS 15-100K 400V/3Ph P.O.A.44510850261001530A \ 4PCR/15-100K/3

PTS 15-200 400V/3Ph P.O.A.475105115092001530F \ 8PCR/15-200/3

PTS 25-100K 400V/3Ph P.O.A.46310861351002547B \ 4PCR/25-100K/3

PTS 18.5-200 400V/3Ph P.O.A.49010511611120018.538G \ 8PCR/18.5-200/3

PTS 37-100K 400V/3Ph P.O.A.56510870451003768D \ 4PCR/37-100K/3

PTS 25-200 400V/3Ph P.O.A.5771051180152002548I \ 8PCR/25-200/3

PTS 30-100K 400V/3Ph P.O.A.47510865391003056C \ 4PCR/30-100K/3

PTS 22-200 400V/3Ph P.O.A.5651051165122002243H \ 8PCR/22-200/3

PTS 45-100K 400V/3Ph P.O.A.57910872511004582E \ 4PCR/45-100K/3

PTS 30-200 400V/3Ph P.O.A.6011051195172003058J \ 8PCR/30-200/3


Features:


– HD double cutting system

– Double mechanical seal in oil bath

– Free standing only

– Available with seal leak

– Nitec available

– Cooling jacket version available - PTR

PTS 100K – 200

HEA

D / m

60

50

40

30

20

10

0

ED

C

A

B

C

GFJH I




The ETO series are a range of electric horizontal chopper pumps, ideal for particularly heavy duty applications. These pumps are mounted on a frame and coupled with standard electric motors by a flexible coupling. All versions are equipped with a multi vane impeller and double chopping system in the suction inlet.

Features:


– Mechanical seal within oil bath (twin mechanical seal on request)


– Heavy-duty chopping action

– Optional extras: twin mechanical seal larger units

– Non cutting version available on 200 series

ETO SERIES

OUTPUT

mm inchamp kW


HEAD m

CAPACITY l/sec

PRICE £

WEIGHT kg


ETO 30-65 400V/3Ph 880055 5104272.96530A \ 2 ½

ETO 22-80 400V/3Ph 740042.5 3294551.38022G \ 3

ETO 37-65 400V/3Ph 910065.8 5404479.66537B \ 2 ½

ETO 2.2-80 400V/3Ph 46004.83 1322810.7802.2H \ 3

ETO 15-80 400V/3Ph 700028.5 2763238.98015E \ 3

ETO 4-80 400V/3Ph 48008.35 1373014.7804J \ 3

ETO 5.5-100 400V/3Ph 530011.1 19042121005.5L \ 4

ETO 11-150 400V/3Ph 840021.4 3748415.215011O \ 6

ETO 30-200 400V/3Ph 1970055 86016117.520030S \ 8

ETO 45-65 400V/3Ph 1020080 5664686.86545C \ 2 ½

ETO 3-80 400V/3Ph 47006.39 1332712.9803I \ 3

ETO 18.5-80 400V/3Ph 720034.5 2933945.58018.5F \ 3

ETO 4-100 400V/3Ph 49008.35 166379.81004K \ 4

ETO 7.5-100 400V/3Ph 550014.8 1914514.71007.5M \ 4

ETO 15-150 400V/3Ph 855028.5 3829418.615015P \ 6

ETO 37-200 400V/3Ph 2100065.8 95018019.720037T \ 8

ETO 9-100 400V/3Ph 570019 2034816.11009N \ 4

ETO 22-200 400V/3Ph 1895042.5 80014014.820022R \ 8

ETO 18.5-150 400V/3Ph 870034.5 4119521.515018.5Q \ 6

ETO 45-200 400V/3Ph

PRODUCT CODE

PCR/ETO 30-65/3

PCR/ETO 22-80/3

PCR/ETO 37-65/3

PCR/ETO 2.2-80/3

PCR/ETO 15-80/3

PCR/ETO 4-80/3

PCR/ETO 5.5-100/3

PCR/ETO 11-150/3

PCR/ETO30-200/3

PCR/ETO 45-65/3

PCR/ETO 3-80/3

PCR/ETO 18.5-80/3

PCR/ETO 4-100/3

PCR/ETO 7.5-100/3

PCR/ETO 15-150/3

PCR/ETO37-200/3

PCR/ETO 9-100/3

PCR/ETO22-200/3

PCR/ETO 18.5-150/3

PCR/ETO45-200/3 2300080 115020022.520045U \ 8

C

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

242220181614121086420

0 40 60 80 100 120 140 160 180 200 220

ST

U

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

120

110

100

90

80

70

60

50

40

30

20

10

0 0 10 20 30 40 50 60 70 80 90 100

B

N O

A

C

F

G

E

H I JK

L M P

Q

R

ETO 75-65 400V/3Ph 12400TBA 580431126575D \ 2 ½PCR/ETO 75-65/3

D



OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUMPUMP TYPE PRICE £

CAPACITY l/sec

HEAD m

DELIVERY STATUS

ETV 15-80 400V/3Ph PCR/ETV 15-80/3 67003238.98015.028.5D \ 3

ETV 4-80 400V/3Ph PCR/ETV 4-80/3 43503014.7804.08.35C \ 3

ETV 18.5-80 400V/3Ph PCR/ETV 18.5-80/3 81003945.58018.538E \ 3

ETV 4-100 400V/3Ph PCR/ETV 4-100/3 4800379.81004.08.35G \ 4

ETV 2.2-80 400V/3Ph PCR/ETV 2.2-80/3 41502710.7802.24.83A \ 3

ETV 7.5-100 400V/3Ph PCR/ETV 7.5-100/3 54004514.71007.514.8I \ 4

ETV 11-150 400V/3Ph PCR/ETV 11-150/3 83008415.215011.021.4K \ 6

ETV 22-80 400V/3Ph PCR/ETV 22-80/3 82004551.38022.042.5F \ 3

ETV 5.5-100 400V/3Ph PCR/ETV 5.5-100/3 500042121005.511.1H \ 4

ETV 3-80 400V/3Ph PCR/ETV 3-80/3 42502712.9803.06.39B \ 3

ETV 9-100 400V/3Ph PCR/ETV 9-100/3 56004816.11009.019J \ 4

ETV 15-150 400V/3Ph PCR/ETV 15-150/3 85009218.615015.028.5L \ 6

ETV 18.5-150 400V/3Ph PCR/ETV 18.5-150/3 87009521.515018.038M \ 6

The ETV series are a range of electric vertical chopper pumps, ideal for particularly heavy duty applications. These pumps are mounted on a vertical frame, which includes the suction inlet and they are coupled with standard electric motors by a flexible coupling.

All versions are equipped with a multi vane impeller and double chopping system in the suction. These pumps are recommended for applications that require an adequate chopping of the solid materials present in the liquid being pumped.

Features:


– Single mechanical seal within oil bath


– Optional extras: twin mechanical seal

ETV SERIESPERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

55

50

45

40

35

30

25

20

15

10

5

0 0 10 20 30 40 50 60 70 80 90 100

M

C

EF

D

I

JK LA B

G H

C




OUTPUT

mm inchkWamp

CURVEPRODUCT CODE

DISCHARGE MAXIMUMPUMP TYPE PRICE £

CAPACITY l/sec

HEAD m

DELIVERY STATUS

The PT vertical chopper pump is driven by an electric motor and has a heavy duty, robust design making it suitable for professional use.

The PTEM versions have a nozzle jet mixer. Both versions are equipped with a multi-impeller and double chopping system in suction.

Features:


– Single mechanical seal within oil bath

– Available from 2m to 5m shaft length


PT SERIES

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

30

25

20

15

10

5

0

0 10 20 30 40 50 60 70 80 90 100 110

E

A D GFC

B

PTEM SERIES PTE SERIES

ELEC

TRIC

MOT

OR D

RIVE

N

PTE 9-100 400V/3Ph PCR/PTE 9-100/3 19 100 4 16 48 P.O.A.9D \

PTE 4-100 400V/3Ph PCR/PTE 4-100/3 8.35 100 4 10 37 P.O.A.4A \

PTE 18.5-150 400V/3Ph PCR/PTE 18.5-150/3 38 150 6 22 95 P.O.A.18.5G \

PTE 11-150 400V/3Ph PCR/PTE 11-150/3 21.4 150 6 15 85 P.O.A.11E \

PTE 5.5-100 400V/3Ph PCR/PTE 5.5-100/3 11 100 4 12 42 P.O.A.5.5B \

PTE 15-150 400V/3Ph PCR/PTE 15-150/3 28.5 150 6 19 92 P.O.A.15F \

PTE 7.5-100 400V/3Ph PCR/PTE 7.5-100/3 14.8 100 4 15 45 P.O.A.7.5C \

C



PTH SERIES C

The PTH series is a range of high pressure centrifugal chopper pumps, ideal for particularly heavy duty applications. These pumps have an overgear-box that is driven via a PTO shaft. They have multi-channel impellers, and a double chopping system.

These pumps are recommended for applications that require a substantial head and adequate chopping of the solid materials, present in the liquid being pumped, ideal for systems with self-propelled sprinklers or marked height differences and long pipelines.

Features:


– Mechanical seal within oil bath


– Galvanised frame available

– Two discharge manifold available

– Improved gearbox design

mm inch

CURVEPRODUCT CODE

SUCTION/DISCHARGE MAXIMUM

HEAD m

CAPACITY l/min

PRICE £


PTH 65 PCR/PTH65 P.O.A.3300125150 x 65A \ 6 x 21/2

PTH 80 PCR/PTH80 P.O.A.260070100 x 80B \ 4 x 3

PTH 100K-TTE PCR/PTH100K-TTE P.O.A.5750138150 x 100D \ 6 x 4

PTH 100 PCR/PTH100 P.O.A.530060150 x 100C \ 6 x 4

PTH 100KK-TTE

PTH 150

PCR/PTH100KK-TTE

PCR/PTH150

P.O.A.

P.O.A.

5750

7800

155

50

150 x 100

200 x 150

E \

F \

6 x 4

8 x 6

500 1000 1500 2000 3000 4000 5000 6000 7000 8000

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

150160

125

100

8070

60

50

40

B

30

20

10

A

D

C

F

E




mm inch

CURVEPRODUCT CODE

MAXIMUM

HEAD m

CAPACITY lpm

PRICE £


PTD 65 PCR/PTD65 44003300125150 x 65B \ 6 x 21/2

PTO 100K PCR/PTO100K/3 41002700 – 450050 – 115150 x 100A \ 6 x 4

PTD 80 PCR/PTD80 4400240070100 x 80C \ 4 x 3

PTD 100K-TTE PCR/PTD100K 55005750138150 x 100E \ 6 x 4

PTD 100 PCR/PTD100 4600530060150 x 100D \ 6 x 4

PTD 100KK-TTE

PTD 150

PCR/PTD100KK

PCR/PTD150

6800

5400

5750

7500

155

50

150 x 100

200 x 150

F \

G \

6 x 4

8 x 6

PTO / PTD SERIESThe Cri-man PTO / PTD Series are a range of horizontal centrifugal chopper pumps, ideal for particularly heavy-duty applications.

The PTO series can be coupled with electric motors or diesel engines by a flexible coupling.

The PTD series can be coupled with flywheels of the diesel engine via flex coupler. Both versions are equipped with multi-vane impeller and double chopping system in the suction. These pumps are recommended for systems with self-propelled sprinklers, marked height differences and long pipes.

Features:



– Heavy duty chopping action

– Adaptable design

– Improved gearbox design

C

PTO

PTD

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

200

150

10080

6050

30

40

20

500 1000 1500 2000 3000 4000 500010

A

500 1000 1500 2000 3000 4000 5000 6000 7000 8000

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

150160

125

100

8070

60

50

40

C

30

20

10

B

E

D

G

F

SUCTION/DISCHARGE



T-T SEPARATOR RANGE C

The Separator slurry handling equipment is recommended for the solid-liquid separation of slurry. It has a rotary double-threaded screw, in a wedge wire filter. The components are made in treated stainless steel for longevity. Can reduce moisture content on sludges down to 40%.

Features:


– Cast iron & stainless steel construction

– Up to 33rpm

– Screen sizes from 0.25 – 1mm

OUTPUT kW

SEPARATOR ROTATION

(rpm)

SCREEN MESH mm

CAPACITY m3/h

PRICE £

WEIGHT kg


SM260 MINI P.O.A.290.04.5 – 180.25, 0.5, 0.75, 13.020

SM260 PROFESSIONAL P.O.A.440.04 – 500.25, 0.5, 0.75, 14.033

SM260 DM P.O.A.470.06 – 220.5, 0.75, 15.514

SM260 BASIC P.O.A.390.04 – 500.25, 0.5, 0.75, 14.033

SM300 PROFESSIONAL P.O.A.515.06 – 720.25, 0.5, 0.75, 15.533

SM260 FA DM P.O.A.500.05 – 320.5, 0.75, 17.520

Solution for farm contractor or farmers for shared management of manure.

Features:

– Mobile Separation Unit is a plug-and-play equipment that can be easily transported, positioned and operated in a short time.

– It comprises of CRI-MAN standard machines and it is a flexible system: it is possibile to assemble the unit with different sizes of separators and pumps.

– The long pivoting conveyor allows you to load the solid fraction in a wide working area.

– Two Chopper pumps (for separator feeding and liquid fraction).

– It has an overflow circuit on the separator and an electro priming pump fitted onto the discharge supply pump.

– Easily transportable, being completely mounted on a compact frame.

– Applicable to Livestock, Biogas and Food Industry.

MSU C

SEPARATOR’S SUPPLY CHOPPER

ELECTRO-PUMP kW

RELAUNCH CHOPPER ELECTRO-PUMP

kW

ADJUSTABLE CONVEYOR BELT

kW

PRIMING ELECTRO-PUMP

kW

SEPARATOR kW

SEPARATOR ENGINES IMPLEMENTEDPUMP TYPE

MSU 260 BASIC

MSU 300 PRO

MSU 260 DM

MSU 260 FA DM

SM260 BASIC

SM260 FA DM

SM300 PROFESSIONAL

0.75

0.75

0.75

0.75

0.75

2.2

2.2

2.2

2.2

2.2

2.2

2.2

2.2

2.2

2.2

4

4

5.5

4

5.5

4

4

5.5

5.5

7.5

SM260 DM

SM260 PROFESSIONALMSU 260 PRO

– Basic & professional versions available

– High dry matter version also available

– Designed and built for longevity

– 1Ph mini available

HIGH

DR

Y M

ATTE

R05 – AGRICULTURAL / ENVIRONMENTAL



kW

CAPACITY m3/h

PRICE £

TYPE SEPARATOR ROTATION

(rpm)

DELIVERY STATUS

MXL 11/4/1.5 P.O.A.39771121.4351

MXL 15/4/4.5 P.O.A.53351528.5351

MXL 11/4/4.5 P.O.A.39771121.4351

MXL 18.5/4/1.5 P.O.A.688418.534.5354

MXL 15/4/1.5 P.O.A.53351528.5351

MXL 18.5/4/4.5 P.O.A.688418.534.5354

MXL 11/4/4.5 P.O.A.39771121.4351

MXL 15/4/5.5 P.O.A.53351528.5351

MXL 11/4/5.5 P.O.A.39771121.4351

MXL 18.5/4/3 P.O.A.688418.534.5354

MXL 15/4/3 P.O.A.53351528.5351

MXL 18.5/4/5.5 P.O.A.688418.534.5354

A lateral mixer powered by electric three phase motor with planetary gearbox. Constructed in stainless steel and with an oil bath lubricated transmission shaft with structural support, this mixer can be supplied in different lengths and the installation angle can be chosen as required.

Particularly suitable for breaking crusts or homogenzing fluids near to the solids inlet area, this product is also available in a version with ATEX electric motor. The machine provides mixing with the same characteristics as a TBM of equal power but with the advantage of a motor and reduction unit external to the digester and the possibility of reaching different points inside the digester with the mixing rotor.

Features:

– Patented self supporting shaft

– Lateral external mounted motor

– Planetary gearbox for increased torque

– Axial thrust 2158 – 3826N

– Capacity 3286 – 6702m3/h

– Max length of propeller shaft 5.5m

– Propeller in stainless steel with self-cleaning profile

– Maximum working temperature 60°C

– Available in ATEX

The PLD series of pumps are designed for high density fluid. Combined with a BMC Macerator it can form a system for maceration, homogenization, and loading for a biogas digester.

Valve arrangement or material loading tank, supplying the double pump pistons and an automatic valve system that permits alternating loading and unloading of the pistons.

Features:

– Hydraulic motor power 5.5kW

– Capacity 10 – 30m3/h

– Head 80m

– Pistons stroke 900mm time of materials inside the macerator

– Suitable for liquids with up to 27% total solids

– Available with heat exchange unit

PLD SERIES

mm inch

PRODUCT CODE

DISCHARGE MAXIMUM

HEAD m

CAPACITY lpm

PRICE £

WEIGHT kg

TOTAL SOLIDS

%


PLD SERIES PCR/PLD5.5 200 80 500 27 600 P.O.A.6

C

MXL MIXER SERIES C

OUTPUT

amp



The HBC Biocell transforms slurry into comfortable and hygienic pasteurised bedding.

It guarantees consistent quality and sanitisation of the bedding produced from recycled separated solids even under the most unfavourable conditions, permitting substitution of straw bedding.

Features:

– Economic production of bedding

– Daily efficient operation

– Consistent quality

– Easy to use

– Plc control

– Improved, more economic management of slurry

– No additional storage requirements

– ST/ST construction

– Monitors process temperature

HBC BIOCELL

1 2

3

4

56

7

MANURE

OVERFLOW

SOLID FRACTION

SOLID FOR BEDDING

HOSE REEL

STORAGE TANK

LIQUID FRACTION

Livestock Manure Management

New HBC 250 version coming soon for smaller herds. Cost saving – enquire for site visit.

Technical features

LEVEL GAUGE

SEPARATOR

LOADING CELLS

MIXER GEAR UNIT

FUME EXTRACTION FAN

TEMPERATURE SENSOR

AIR INSUFFLATION FAN

MATERIAL EXTRACTION SCREW CONVEYOR

C

MATERIAL OUTPUT tonnes

PRICE £

WEIGHT kg

PUMP TYPE

HBC 500

HBC 1000

HBC 2500

P.O.A.

P.O.A.

P.O.A.

25005.5

40006.5

600010.5

4

8

20

DELIVERY STATUS

OUTPUT kW




MANDALS HOSET-T are the sole UK distributor for Mandals’ world class range of layflat hose.

We offer hoses specially designed for use with umbilical drag hose systems. This ensures environmentally friendly and safe manure distribution, and also prevents hard-packing of the soil. Lighter hoses are used as supply hoses for irrigation and as feeder hoses for slurry systems. Our hoses are resistant to most industrial and agricultural chemicals, ozone and UV-rays, and they offer the very highest abrasion resistance and tensile strength.

FLEXITEX EXTRA

A reinforced fluid transfer hose for agricultural systems, predominantly used as a feed hose from farm to field.

ULTRAMAN (STANDARD PU)

A multi purpose transfer hose, which is suitable as a feeder hose or even a drag hose in smaller umbilical systems.

DRAGMAN (HEAVY DUTY PU)

This hose is specially designed to withstand extreme tensile stress, pulling forces and abrasion from umbilical slurry systems.

ULTRAMAN EXTRA HYBRID HOSE AVAILABLE

B



C

MXTMixer for suspension on the back of a tractor for mixing in slurry tanks.

Features:

– Tractor driven

– Galvanized steel construction

– Up to 12% total solids

PRICE £

WEIGHT kg

PROPELLER DIAMETER

mm

MODEL

MXT 6/55

MXT 6/75

MXT 6/90

P.O.A.

P.O.A.

P.O.A.

480

500

520

4055

5575

66

LENGTH m

7.71 600

7.71 720

7.71 770

CAPACITY m3/h

4680

7815

946090

DELIVERY STATUS

kW

TRACTOR RATED POWER

hp

The CFS series is designed to shred solid materials suspended in the substrate before entering into the digester. It can be supplied with a suction or pressure pump or operate under head withouta pump. Ideal for shredding long fibres and objects of medium to large dimensions.

The system comprises two series of opposing hardened steel blades with specially designed profiles for shredding solid materials suspended in fluids.

A gearbox integrated into the body of the shredder generates different rotation speeds between the two blade support shafts, optimising the process.

CFS SHREDDER SERIES

Updated models coming soon, visit www.ttpumps.com for more information.

C




HYDRAULIC PUMPS

Hydraulic driven mixer, designed with heavy duty application in mind, offering 18.5kW power from a small unit the TBHM provides increased torque for high density liquids.

Features:

– Max immersion depth 20m

– Max solid content in the liquid 12%

– Liquid pH 5 – 12

– Max temperature of pumped liquid 40°C

– Telescopic arm available

HYDRAULIC MOTORS FEATURE MIXER FEATURE

PRICE £

OIL PRESSURE bar

PRODUCT CODE

MAX OIL CAPACITY

l/min

MAX POWER

kW

BLADES BLADES Ø

MAX RPM n

CAPACITY m3/h

AXIAL FORCE

N

DELIVERY STATUS

TBHM 18.5 P.O.A.354 6884 382618.5 57 195 2 780

PERFORMANCE DATA

HEA

D / m

m

10

5

0

-5

-10 0 10 20 30 40 50 60 70 80 90 100

TBHM CURVE

TBHM

TBHM

The PTSH series, ideal for tough applications where increased torque is required, featuring open multi-channel impeller and double cutting system.

Features:

– Mechanical seal


– Telescopic arm available

PRODUCT CODE

HYDRAULIC MOTORS FEATURE HYDRAULIC CONNECTIONS

PRICE £

OIL PRESSURE bar

MAX OIL CAPACITY

l/min

MAX RPM n

MAX POWER

kW

SUCTION PORT

S

SERVICE LINE PORT

U

DRAIN PORTS S1, S2

DELIVERY STATUS

PTSH – 100

PTSH – 150P.O.A.

SAE 6000 ½” GAS

SAE 6000 ½” GAS

3/8” GAS12

24.8481600

153

316

PERFORMANCE DATA

HEA

D / m

CAPACITY m3/h

30

25

20

15

10

5

0 0 10 20 30 40 50 60 70 80 90 100 110

PTSH CURVE

PTSH

A

B

PTSH

C

C



COMPACTORS SCREENING & SCREEN EXTRACTORSThe Screen Compactor is a slimline combined machine consisting of:

– SCREEN A drilled or wedge-wire metal screen section with mesh sizes 0.25mm to 10mm

– CONVEYOR To elevate the captured solids out of the effluent and dewater by gravity conveying them towards the pressing zone

– PRESS Dewatering and compressing the screenings to give a volume reduction of up to 40%

The Screen Extractor comes without the pressing section.

MODELS

– SFC = Screen press for channel installation

– SFC/T = Screen press installed in a self-supporting container

– SF = Screen without press for channel installation

– SF/T = Screen without press in a self-supporting container

RANGE AND PERFORMANCE

– Throughput rates up to 1000m3/h

– Screen mesh size ranging from 0.25mm to 10mm

– Screen width ranging from 200mm to 700mm

– Volume reduction up to 40%

DESIGN FEATURES

– Stainless steel housing

– Shaftless spiral screw made of carbon steel or stainless steel

ACCESSORIES

– Single or continuous bagging unit

– Heating for cold regions

– Screenings washing for faecal removal

– With by-pass overflow (on model T only)

– The units can be manufactured from stainless steel, on request

Bespoke system available, please speak to our sales team on +44 (0) 1630 647200.




www.ttpumps.com / T: +44 (0) 1630 647200

SECTION 07 INDUSTRIAL / LUBRICANT /

FUEL PUMPS

116

07 – INDUSTRIAL / LUBRICANT / FUEL PUMPS

AEP BRONZE RANGE

EP range of self-priming transfer pumps with pump body and liquid ring impeller constructed in bronze for transfer of water and liquids with bronze compatibility. This pump also features a bi-directional motor.

Features:

– Bronze construction

– Self-priming

– Reversible operation

– Excellent priming action

– 12 & 24 volt available for vehicle use

– Suitable for use with sea water when 316 stainless steel added

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

40

30

20

10

0 0 50 100 150 200 250 300 350 400 450 500

A D EC

B

F

OUTPUT

mm inch BSP

kWamp

PRODUCT CODE

DISCHARGE PRICE £

PUMP TYPE

EP25 12 VOLT

EP25 24 VOLT

EP25 230V/1Ph

EP30 230V/1Ph

EP25 400V/3Ph

EP25 110V/1Ph

EP30 110V/1Ph

EP30 400V/3Ph

EP40 230V/1Ph

EP40 110V/1Ph

EP40 400V/3Ph

EP50 400V/3Ph

EP70 400V/3Ph

TROLLEY FOR EP25 TO EP40

HEAVY-DUTY CARRY FRAME

PL/EP25/12

PL/EP25/1

PL/EP30/1

PL/EP25/24

PL/EP25/3

PL/EP25/2

PL/EP30/2

PL/EP30/3

PL/EP40/1

PL/EP40/2

PL/EP40/3

PL/EP50/3

PL/EP70/3

PLS/36202002

PLS/FRAME25

590

590

330

365

350

500

520

500

550

550

550

880

4400

80

70

WEIGHT kg

9.2

9.8

13.5

9.3

9.8

9.8

13.5

13.2

16.2

16.2

15.7

26.5

75

5

5

1 x 1

1 x 1

1 x 1

1 x 1

1 x 1

11/4 x 11/4

11/4 x 11/4

11/4 x 11/4

11/2 x 11/2

11/2 x 11/2

11/2 x 11/2

2 x 2

23/4 x 23/4*

0.45

0.45

0.75

0.45

0.56

0.45

0.75

0.75

0.75

0.75

0.75

1.86

5.5

38 12 53

4.2 15 60

5.1 17 72

22 12 53

2 15 60

9.8 15 60

11 17 72

2.1 17 72

5.3 21 120

11.1 21 120

1.75 21 120

4.36 29 230

11.8 39 500

CURVE

A \

A \

B \

B \

B \

C \

C \

C \

D \

D \

D \

E \

F \

25 x 25

25 x 25

25 x 25

25 x 25

25 x 25

32 x 32

32 x 32

32 x 32

40 x 40

40 x 40

40 x 40

50 x 50

70 x 70

DELIVERY STATUS

MAXIMUM

HEAD m

CAPACITY l/min


INDUSTRIAL / LUBRICANT / FUEL PUMPS – 07

117

AEP STAINLESS STEEL RANGE

The EP Junior, Senior and Master stainless steel side channel self-priming transfer pumps, are suitable for liquid transfer without particles.

Stainless steel 316 pump body and liquid ring impeller.

Features:


– Self-priming

– Reversible operation

– Excellent priming action

OUTPUT

mm inchkWamp

PRODUCT CODE

DISCHARGE WEIGHT kg

PRICE £

PUMP TYPE

EP JUNIOR 110V/1Ph

EP JUNIOR 230V/1Ph

EP JUNIOR 400V/3Ph

EP SENIOR 400V/3Ph

EP SENIOR 230V/1Ph

EP SENIOR 110V/1Ph

EP MASTER 110V/1Ph

EP MASTER 230V/1Ph

EP MASTER 400V/3Ph

TROLLEY FOR JUNIOR/MASTER/SENIOR

PL/JUNIOR/2

PL/JUNIOR/3

PL/SENIOR/3

PL/JUNIOR/1

PL/SENIOR/1

PL/SENIOR/2

PL/MASTER/2

PL/MASTER/1

PL/MASTER/3

PLS/36202002

9.521 58 720

690

690

1140

1140

1140

1700

1650

1650

80

9.621 58

17.623 120

9.521 58

17.523 120

17.523 120

27.530 230

27.530 230

26.530 230

5

11/4 x 11/4

11/4 x 11/4

11/4 x 11/4

11/2 x 11/2

11/2 x 11/2

11/2 x 11/2

2 x 2

2 x 2

2 x 2

0.45

0.56

0.75

0.45

0.75

0.75

1.86

1.86

1.86

9.8

2

1.75

4

5.3

11

18

9.3

4.36

CURVE

A \

A \

A \

B \

B \

B \

C \

C \

C \

32 x 32

32 x 32

32 x 32

40 x 40

40 x 40

40 x 40

50 x 50

50 x 50

50 x 50

DELIVERY STATUS

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

35

30

25

20

15

10

5

0 0 50 100 150 200 250

CBA

MAXIMUM

HEAD m

CAPACITY lpm



A

118

IRON50 DIESEL TRANSFER PUMP

Diesel transfer pumps that incorporate a self-adjusting rotary vain design. The cast iron pump body is fitted with a bypass valve and stainless steel filter in the suction.

Features:

– Self-priming. Eccentric with self-adjusting blades

– Recirculation bypass

– Iron50 Motor: 0.25kW (12 & 24VDC) self-ventilated, RPM 3.000

– Iron50 Motor: 0.3kW 230VAC 50/60Hz Self-ventilated, RPM 2.800

– Connection F3/4”/F1” (BSP)

– Continuous duty

– IP55 protection

– On / off switch

– Stainless Steel filter in the suction of 352 micron

PERFORMANCE DATA

PRES

SURE

/ ba

r

FLOW / l/min

3

2.5

2

1.5

1

0.5

0 0 10 20 30 40 50

B

A

IRON50 12V & 24V

IRON50 230V

PRODUCT CODE

CABLE m

WEIGHT kg

PRICE £

SUCTION LIFT

m


OUTPUT

mm inchkWamp

DISCHARGE MAXIMUM

HEAD m

CAPACITY l/min

CURVE

IRON50 12V PG/AG-35-12VDC 4.522.7 22012 5010.318 – 24 25A \

IRON50 12V KIT PG/DBK-12VDC 822.7 26012 5010.318 – 24 25A \

IRON50 24V PG/AG-35-24VDC 4.522.7 22012 5010.39 – 17 25A \

IRON50 230V PG/AG-46-220VAC 8.532.7 23021 5010.251.2 – 2 25B \

IRON50 24V KIT PG/DBK-24VDC 7.722.7 26021 5010.39 – 17 25A \



119

The AG90 range of diesel transfer pumps incorporate a self-adjusting rotary vane, and its cast-iron pump body is fitted with a bypass valve.

WITH SWITCH KEY

Available with a built-in switch with key to start and stop it without touching the battery clamps. This key can be removed for safety and security reasons.

Features:

– Self-priming. Eccentric with self-adjusting blades

– Motor 0.37kW (12 & 24VDC) self-ventilated, RPM 1.500

– Thermal protection

– Continuous duty

– 3m cable with clamps

– Connection through F1” (BSP) threads or flanges

– IP55 protection

– Stainless steel filter in the suction of 352 micron

OUTPUT

kWamp

PRODUCT CODE

DELIVERY m

WEIGHT kg

CABLE m

PRICE £

PUMP TYPE

AG90 12VDC

AG90 24VDC

AG90 12VDC WITH SWITCH

AG90 24VDC WITH SWITCH

PG/AG-90-12VDC

PG/AG-90-12VDCSW

PG/AG-90-24VDC

PG/AG-90-24VDCSW

15.5 520

520

550

550

15.5

15.5

15.5

0.37

0.37

0.37

0.37

35 – 53A

35 – 53A

24 – 32A

24 – 32A

CURVE

A \

A \

A \

A \

20 3

20 3

20 3

20 3

DELIVERY STATUS

SUCTION LIFT

m

2.7

2.7

2.7

2.7

A AG90 DIESEL TRANSFER PUMP

PERFORMANCE DATA

PRES

SURE

/ ba

r

FLOW / l/min

2.5

2

1.5

1

0.5

0 0 20 40 60 80 100

A

IRON75 & IRON100 DIESEL TRANSFER PUMPThe IRON75 & IRON100 range of diesel transfer pumps incorporate a self-adjusting rotary vane, and its cast iron pump body is fitted with a bypass valve.

Features:

– Self-priming, eccentric with self-adjusting blades

– Recirculation bypass

– Thermal protection

– Continuous duty

– IP55 protection

– Bypass pressure 1.4-1, 6 bar / 2.5-3 bar

– Inlet / outlet 1” (BSP)

– 3m electric cable

– On / off luminous switch

– Anti rust treatment

A

DELIVERY m

WEIGHT kg

RPM PRICE £

FLOW l/min

PUMP TYPE CURVE DELIVERY STATUS

IRON75 8.5 3000 35575A \ 30

IRON100

PRODUCT CODE

PG/AG-88-220VAC

PG/AG-88-0.74VAC

SUCTION LIFT

m

2.7

5 47510015 1500

OUTPUT

kWamp

0.751.9 – 4.5

14 – 6B \ 30

PERFORMANCE DATA

PRES

SURE

/ ba

r

FLOW / l/min

3

2.5

2

1.5

1

0.5

0 0 20 40 60 80 100

A B

MAXIMUM

8025 1

8025 1

8025 1

80

HEAD m

1.5

1.5

1.5

1.525 1

CAPACITY l/min

mm inch

DISCHARGE


120


AAG ATEX RANGE

IRON50 AG800 BAG800

Self-priming, explosion proof pumps suitable for petrol, kerosene and diesel transfer.

Features:

– Recirculation bypass system

– Eccentric with self adjusting blades

– Thermal protector

– Connection IRON50 3/4” (BSP), AG800 1” (BSP), BAG800 11/2” (BSP)

– Cataphoretic treatment

– AG500 / AG800 S2 30’ operation, BAG continuous duty

– 0°C – +50°C operation temperature

– AG500 / 800 IP55 protection

– AG500 / 800 on / off switch

– BAG 800 bypass pressure 3 – 3.5 bar

PRODUCT CODE

WEIGHT kg

PRICE £


IRON50 EX

IRON50 24V EX

PG/AG500-230V

PG/AG600-24V

11.4

11.2

880

980

IRON50 12V EX

AG800

BAG800 400V/3Ph

PG/AG600-12V

PG/AG800-230V

PG/BAG800-400V

11.2

17.4

33.5

980

1150

2000

OUTPUT

kWamp

SUCTION LIFT

m

RPMCURVE

2.7

2.7

2850

3000

0.18

0.18

1 – 1.8 50Hz 1Ph

10 – 1424VDC

A \

B \

FREE FLOW l/min

50

50

50

70 – 80

100 – 150

2.7

5

5

3000

1430

1400

0.18

0.37

1.0

20 – 27 12VDC

2.3 – 3.5 230V

1.8-2.7

B \

C \

D \

PERFORMANCE DATA

OPER

ATIO

N P

RESS

URE

/ ba

r

CONSUMPTION / l/min

3.5

3

2.5

2

1.5

1

0.5

0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

A C

B

D



121

MINI FUEL STATION A

These kits are suitable for petrol / urea / diesel supply and are manufactured with materials compatible with these fluids. They can also be placed out in the open. The pumping and measuring kit are protected and guarantees a long life as a result of the cataphoretic treatment.

Composed of:

– Pumping kit (according to the model)

– Measuring kit, composed of meter, with mechanical or digit indicator and digit totalizer. Accuracy: ±1%

– 4m delivery hose Ø19 or 25mm (depending on pump)

– PA-60 or PA-80 automatic nozzle (according to the model)

Features:

– Chassis made of steel

– High epoxid paint

– Weatherproof

– Mechanical / digital options

– 60 / 130 programmable users (Mini 46 & 88K)

PRODUCT CODE

WEIGHT kg

PRICE £

FLOW l/min

MECHANICAL/ DIGITAL

PUMP TYPE

MSGM-3580

MINI 35K-60

MSGM-4680

MINI 46K-60

MINI 88K-60

MINI BLUE 45CK-60

MSGE-50080

MSGM-8880

MINI 46K-130

MINI 88K-130

MINI BLUE 45CK-130

MSGE-80080

PG/MSGM-3580

PG/MINI 35K-60

PG/MSGM-4680

PG/MINI 46K-60

PG/MINI 88K-60

PG/MINI45CK-60B

PG/MSGE-50080

PG/MSGM-8880

PG/MINI 46K-130

PG/MINI 88K-130

PG/MINI45CK-130B

PG/MSGE-80080

18

20.5

21

22.5

32.5

18

28.5

32

22.5

32.5

18

32

35 – 45 MECHANICAL

40 – 50 DIGITAL

840

3150


40 - 50 DIGITAL

75 - 85

40

40 – 50

DIGITAL

DIGITAL

MECHANICAL

900

3250

2950

3500

2080


40 - 50 DIGITAL

75 - 85

40

70 – 80

DIGITAL

DIGITAL

MECHANICAL

1450

3650

3950

4250

2650

DELIVERY STATUS

DIES

ELUR

EA

(AD

BLUE

)PE

TROL

MSGM

MSGE


MECHANICAL METERS A

122


– High quality plastic construction with transparent frontal made of “macrolon” material– Polyamide and fibreglass housing – Fireproof measuring chamber with oscillant disc – Flow: 10-90 l/min – Accuracy: ±1% – Partial indicator of 3 digits and totaliser of 6 digits – Maximum operation pressure: 3.5 bar

– Resistance pressure: 13 bar– Test pressure: 6 bar – Maximum temperature: 60ºC – Connection: 1” (BSP), 3 inlets, 2 outlets – Supplied with 2 additional 1” (BSP) adapters. The 1” (BSP) red adapter has built-in filter-sieve of 352 micron – Bypass valve for the meter calibration

– It is equipped with lateral packing gland and 90cm of connection cable– Pulses per litre: 10 pulses per channel

APPLICATIONIMAGEPUMP TYPE TECHNICAL INFORMATION CODE

PG/MG-80 165

190

165

650

650

PG/MG-80V

PG/MG-80A

PG/MGI-80

PG/MGI-80V

MG-80 MECHANICAL

METER

MGI-80 MECHANICAL

METER

MGI-80V MECHANICAL METER

MG-80V MECHANICAL METER

MG-80V MECHANICAL METER

PRICE £

DELIVERY STATUS

The meters are for private use and not suitable for fiscal operations.It also guarantees the absence of toxicity and negative ecological effects. Suitable for diesel, petrol and urea.

This meter has the same features as the MG-80 mechanical meter with a pulser in its inner of 2 communication channels that allow the connection to a own consumption controller. Suitable for diesel and petrol.

This meter has the same features as the MG-80 mechanical meter with a pulser and Viton joints.Suitable for diesel and petrol .

This meter has the same features as the MG-80 mechanical meter with a pulser in its inner of 2 communication channels that allows the connection to a consumption controller.Suitable for diesel, petrol and urea.

This meter has the same features as the MG-80 meter, but has aluminium casing.IT IS NOT SUITABLE FOR UREA TRANSFER.



123

LUBRICANT GEAR PUMPS

The self-suction gear pump is suitable for lubricant and oil transfer.

Features:

– Recirculation bypass system (EA-10B directional)

– Suction lift 2.5m

– IP55 protection

– RPM 1500 (EA-10B 1350)

– Inlet / outlet 1/2” (BSP) (EA-10B 3/8”)

– On / off switch

– 3m connection cable (EA-10B 2m)

– Connection: 1/2” / 12mm

– Continuously rated

PERFORMANCE DATA

PRES

SURE

/ ba

r

FLOW / l/min

14

12

10

8

6

4

2

0 0 5 10 15 20

A

B

C

PRODUCT CODE

WEIGHT kg

CURVE PRICE £

FLOW l/min

BAROUTPUTPUMP TYPE

EA-88

EA-90 24VDC

HANDLE WITH LOWER SUPPORT TO BE FITTED TO GEAR PUMPS FOR EASY HANDLING

AVAILABLE IN BLACK

EA-88

EA-90 12VDC

PG/EA-88-6BAR

PG/EA-90-24VDC

PG/EA-88-18BAR

PGS/HANDLE

PG/EA-90-12VDC

10A \

8.5C \

13.2B \

8.5C \

20 - 255 - 62 – 4 0.37

amp kW

20 - 255 - 624 - 40 0.4

550

1120

20 - 259 - 104 - 6 0.74 580

P.O.A.

20 - 255 - 620 - 35 0.4 1120

DELIVERY STATUS

EA88 0.37kW EA88 0.74kWEA90PUMP BRACKET

A


PRODUCT CODE

WEIGHT kg

PRICE £

CURVE MAX OPERATION PRESSUE

bar

FLOW l/min

SUCTION TUBEØ

PUMP TYPE

GC-5/200

GM-5

GM-3

PG/GC-5/200

PG/GM-5

PG/GM-3

14.5

7

5.35

A \ 4040 40mm

C \ 288 1”

2690

510

B \ 258 1” 390

DELIVERY STATUS

124


High pressure and high flow pneumatic pumps, specially designed to work in extreme conditions or when high deliveries are required in a short time. They are suitable for new engine and transmission oil transfer.

GM-3 FEATURES

Half pressure pneumatic pump suitable for lubricant and fluid transfer and distribution.

– Min / max air pressure: 3.5 - 10

– Noise level: +/-67DB (A)

– Outlet oil thread: M1/2”

– Inlet air thread: F1/4”

GM-5 FEATURES

High pressure pneumatic pump for the distribution of all types of lubricants. It is suitable for large installations, even supplying simultaneously lubricant in some points with hose-reels.

– Min / max air pressure: 3.5 - 10

– Noise level: +/-67DB (A)

– Outlet oil thread: M1/2”

– Inlet air thread: F1/4”

PNEUMATIC LUBRICANT PUMPS A

GC GM-3 GM-5

PERFORMANCE DATA

DELI

VERY

RAT

E / l

/min

PRESSURE / bar

16

14

12

10

8

6

4

2

0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30

BC

PERFORMANCE DATA

DELI

VERY

RAT

E / l

/min

FLOW / l/h

10

8

6

4

2

0

0 1.000 3.000 5.000 7.000

A


DELIVERY STATUS


125

HAND PUMPS

BMP-1 PISTON PUMP

RHP-25 CI CAST IRON ROTARY

OIL PUMP

RHP-25 AL ALUMINIUM

ROTARY PUMP

A double action pump suitable for diesel, oil, fuel, alcohol, printing solvents and petrol. It is supplied with a hole to hang the nozzle, the hose and the accessories to prevent dirt and dust entry into the nozzle.

A self-suction rotary pump for a continuous transfer of lubricants and fuels.It is adaptable to barrels from 50 to 200 litres and has a built in M2” adapter with height adjustment for fixing to the barrel.

A self-suction rotary pump for a continuous transfer of lubricants and fuels.It is adaptable to barrels from 50 to 200 litres and has a built in M2” adapter with height adjustment for fixing to the barrel.

BP-5 LEVER PUMP

TMG-040 BELLOW PUMP

TMG-080 BELLOW PUMP

TMG-150 BELLOW PUMP

BT-87 SELF SUCTION DRILL PUMP

Transferring diesel, all types of lubricants and other non-corrosive fluids from barrels of 50 to 200 litres.

Suitable for the transfer of chemicals, aggressive liquids, solvents, petrol, diesel, water and wine.



A useful accessory to empty baths, aquariums, toilet bowls, washing machines, flooded basements, and for caravanning. Suitable for diesel, water, herbicides and antifreeze. It is adapted to any type of hand-held or professional drill (2000/2500rpm) and it can be connected to hose Ø24mm.

APPLICATION

– Capacity 0.8 litre per stroke – Inlet 1” / Outlet: 3/4” – Hose 2.5m hose 3/4” petrol resistance – Drum plug: adjustable at 2” – Suction tube Ø33.5mm x 1m– Aluminium body – Stainless steel inlet – Hardened steel handle – Self- lubricating sealing – Supplied with nozzle hanger

– Aluminium pump body and discharge tube – Metallic suction telescopic tube of 87cm made of aluminium – Connection 1”, 1 ½ or 2” adaptable to metallic barrels of 50, 100 and 200 litres– Nitrile or viton joints – Transfer capacity 0.3 litres x piston-stroke (litres per lever stroke)

– Plastic construction – Tube pump of 0.4m for 50 litre barrel – Flow 6 l/min (Dependent on the piston-stroke) – Suitable for the refuelling of kerosene stoves

– Plastic construction – Tube pump of 0.8m for 200 litre barrel – Flow 20 l/min (Dependent on the piston-stroke)

– Plastic construction – 1.5m flexible pump– Flow 6 l/min (Dependent on the piston-stroke)

– Flow according to the drill revolutions (maximum 60 l/min) – Self-suction up to 1.5m – Delivery up to 25m – High resistance dry operation– Eccentric, self-suction pump with self-adjusting blades – Inner part brass – Shaft and pin Aisi 304 stainless steel – Pump body, blades and rotor injected in plastic

– Type rotary vanes– Capacity 20 litres / 70 round– Suction tube Ø32mm– Discharging tube Ø20mm

– Type rotary vanes– Capacity 20 litres / 70 round– Suction tube Ø32mm– Discharging tube Ø20mm

TECHNICAL INFORMATION

PG/BMP-1

190

PGY/RHP-25-CI

70

PGY/RHP-25-AL

100

PG/BP-5

40

PG/TMG-040

5.50

PG/TMG-080

28

PG/TMG-150

5.50

PG/BT-87

50PRICE

£

CODE

A


126


MANUAL / AUTOMATIC FUEL NOZZLES

TYPE IMAGE APPLICATION MANUAL / FLOW WEIGHT MAXIMUM CONSTRUCTION CODE PRICE DELIVERY AUTOMATIC l/min kg PRESSURE £ STATUS

Automatic

Automatic

Manual

Manual

Automatic

Automatic

Automatic

80 5

12 - 45

60 2 bar

300 3 bar

80 4 bar

120 1.55 4 bar

140 1.6 4 bar

Aluminium body with plastic cover

Stainless steel body with plastic cover

Polyamide 615% Fibreglass

Aluminium




Manual 80 3 bar Aluminium

Automatic 60 4 bar Aluminium body with plastic cover

F1” rotary connection

M1”

F 3/4”

F1 1/2”

F1” rotary (diesel)

F 3/4” or 1” (unleaded petrol)

F1”

F1”

F1” rotary connection

F 3/4”

M1 1 1/2” Automatic 200 1.5 4 bar Aluminium body with plastic cover

Connection sizes available MF 3/4”, MF 1”, M 3/4” & F1”

With MF 1” ball valve and FUP-1 FF 1” filter and 5m delivery hose Ø25mm and PSF-040 manual nozzle

Automatic 80

100

55

25

160

95

100

150

27

55

850

13

200

6

1105 4 bar

4 bar

5 bar5

5

0.65

1.41

5

5


F 3/4” rotary connection

PA-80 UNLEADED

3/4”

PA-80 UNLEADED

PA-60U

PT-60

PE-010

PA-80-1U

PA-120

PA-140

PSF-040

PA-60

PA-250

ROTARY SWIVELS

DIESEL GRAVITY TANK KIT

FUNNEL SET x3: Ø240, Ø160, Ø70 Polyethylene

PG/PA-80-1U

PG/PA-60U

PG/PT-60

PG/PE-010

PG/PA-80

PG/PA-120

PG/PA-140

PSF-040

PG/PA-60

PG/PA-250

PGS/SWIVELS

PGS/TANKKIT

PG/PA-80-3/4U

PGS/FUNNEL

DIES

EL /

PETR

OL U

NLE

ADED

UREA

UNLE

ADED

DIES

EL /

UREA

A



127

FILTER EQUIPMENT A

These micro filters are suitable for trustworthy filtration of diesel and petrol because of their filtering cartridge with water repellent system.

Features:

– Diesel and petrol filtration 5 microns, biodiesel filtration 25 microns

– Filtering capacity 500,000 litres – 1,000,000 litres

– Operation pressure 0.3 – 0.5 bar, FG-10 0.5 – 0 bar, FG-10M 10 bar

– Easy cleaning

inch mm

LUBRICANT FILTRATION

PRODUCT CODE

DISCHARGE CAPACITY l

WEIGHT kg

PRICE £

FLOW l/min

PUMP TYPE

FG-100

FG-100B10

FG-100G

FG-150

FG-300/15

TANK FILTERING TROLLEY

PG/FG-2

PG/FG-2BIO

PG/FG-2G

PG/FG-10

PG/FG-10M

PG/TROLLEY

2.72

2.72

2.72

8

17

60.5

105

105

105

160

300

180

190

280

600

1800

4150

2

2

2

10

15

25mm x 25mm

25mm x 25mm

25mm x 25mm

40mm x 40mm

2” OR FLANGE

DIESEL

BIODIESEL

PETROL

DIESEL / PETROL / BIODIESEL

DIESEL /PETROL /KEROSENE / HYDROCARBON LIQUIDS

MOBILE TROLLEY OF SOLID CONSTRUCTION AND EPOXY PAINT, COMPLETE WITH FG-10 MICRO-FILTER

1” x 1”

1” x 1”

1” x 1”

11/2” x 11/2”

2”

DELIVERY STATUS

FG-100 FG-100GFG-300/15 FG-150


128


LUBRICANT METERS A

-10°C / 1” (BSP) MGE-250 45 +50°C 10 – 250 (FLANGE 2.3 PG/MGE-250 P.O.A. AVAILABLE)

-10°C / 1” (BSP) MGE-110 55 +50°C 5-110 (FLANGE 0.85 PG/MGE-110 P.O.A. AVAILABLE)

MGE-40 50

-10°C / 2 – 40 1/2” (BSP) 0.5 PG/MGE-40 215

+50°C

TYPE IMAGE MAXIMUM MIN / MAX FLOW INLET / OUTLET WEIGHT CODE PRICE DELIVERY OPERATION TEMP l/min CONNECTION kg £ STATUS PRESSURE THREAD bar



129

FILTER EQUIPMENT

TYPE IMAGE MAXIMUM MIN / MAX FLOW INLET / OUTLET WEIGHT CODE PRICE DELIVERY OPERATION TEMP l/min CONNECTION kg £ STATUS PRESSURE THREAD bar

MGI-40

100 PULSES -10°C / 2 – 40 1/2” (BSP) 0.5 PG/MGI-40 160

PER LITRE +90°C

FILTER EQUIPMENT A

A

HIGH RESISTANT PG-40 MANUAL 50 2 – 20 PLASTIC WITH 1 PG/PG-40 40 FIBREGLASS

HIGH RESISTANT PMGE-40 ELECTRONIC 50 2 – 20 PLASTIC WITH 1.8 PG/PMGE-40 300 FIBREGLASS

TYPE IMAGE OPERATION MAXIMUM FLOW INLET / OUTLET WEIGHT CODE PRICE DELIVERY OPERATION l/min CONNECTION kg £ STATUS PRESSURE THREAD bar


J RANGE B

The J range are surface mounted, self-priming, centrifugal pumps with open impeller, large diameter solids handling and replaceable wear plates. They have easily opened inspection covers and externally lubricated mechanical seals.

Self-Priming Principle

The air (yellow arrows) is drawn into the pump due to the negative pressure created by the moving impeller and is emulsified with the liquid (blue arrows) contained in the pump casing.

The air-liquid emulsion is forced into the priming chamber where the lighter air is separated and leaves through the discharge pipe; the heavier liquid drops back down into circulation. Once all of the air has been expelled from the suction pipe, the pump is primed and works like a normal centrifugal pump. The pump can also work with an air-liquid mixture.

The non-return valve has a dual function: it prevents the suction pipe from emptying when the pump is off; in the event of accidental emptying of the suction pipe, this holds a sufficient amount of liquid in the pump casing to prime the pump.

The discharge pipe must be free to expel the air coming from the suction pipe.

CAPACITY / l/min

HEA

D / m

150

10080

60504030

20

108

6

4

2 0 100 200 500 1000 2000 5000 10000 20000

PERFORMANCE DATA

1

13

18

7

414

10

2

8

12

5

11

3

9

16

6

1517

J RANGE

Features:

– Heavy duty casing in cast iron, bronze or stainless steel

– Easily opened priming, drain and impeller inspection covers (Not available for J1-160 / 2-200 / 3-100 / 4-100 Models)

– Ductile iron, aluminium bronze or stainless steel semi-open impeller handling large diameter spherical solids

– Easily replaced cast iron, abrasion resistant rubber faced cast iron, bronze or stainless steel wear place(s). (Not available for J 1-160 / 2-200 / 3-100 / 4-100 Models)

– Externally lubricated mechanical seal. Can run dry on high vacuum even when pumping highly abrasive liquids

– Silicon or tungsten carbide seats (graphite rotating seat for versions for petroleum products)

– Double or cartridge seats available on request

– Bearing housing with heavy duty bearings suitable for direct or v-belt drive

– Standard diameter shaft extension bored and tapped to facilitate the assembly of couplings or pulleys

– Double or cartridge seals available (on request)

Benefits:

– Rapid self-priming without foot valve. Once filled with water, the pump is automatically primed to a height of 7.5m

– Semi-open impeller allowing the passage of wide solid bodies and easy inspection

– High resistance to abrasive liquids: the wear plate is easily replaceable

– Axial mechanical seal lubricated from the outside: no leaks or infiltration of air along the shaft

– Easy to install: only the suction pipe needs to be immersed in the liquid. The pump can be located above and in a dry place, in the most suitable location for service and control

– Long life: the parts subject to wear can be easily replaced, several times, restoring the original performance of the pump

130



J RANGE B

PRICE £

CURVE DISCHARGEPUMP TYPE PRODUCT CODE

FREE PASSAGE

mm

VOLTAGE V

OUTPUT kW

SPEED rpm

WEIGHT kg

OLD VARISCO MODEL mm inch

DELIVERY STATUS

JE 1-110 G10 MM20

JE 1-110 G10 MT20

JE 1-110 G20 MT20

JE 1-160 G30 MT20

JE 1-180 G10 MT20

JE 2-100 G10 MM20

JE 2-100 G10 MT20

JE 2-120 G10 MM20

JE 2-120 G20 MM20

JE 2-120 G10 MT20

JE 2-120 G20 MT20

JE 2-170 G10 MT20

JE 2-170 G20 MT20

JE 2-180 G10 MT20

JE 2-215 G10 ET20

JE 3-100 G10 MM20

JE 3-100 G10 MT20

JE 3-140 G10 MT20

JE 3-180 G10 ET20

JE 3-210 G10 ET40

JE 3-240 G10 FT20

JE 4-100 G10 MT20

JE 4-160 G10 ET20

JE 4-220 G11 FT40

JE 4-250 G11 FT40

JE 6-250 G11 FT40

PV/8381061039

PV/4810059077

PV/8381061057

PV/8381061066

PV/8381060913

PV/8381061073

PV/8381060460

PV/8381061080

PV/8381061086

PV/4810059076

PV/8381061097

PV/8381061101

PV/8381061109

PV/8381061111

PV/8381060252

PV/8381061119

PV/8381061124

PV/8381061129

PV/8381060277

PV/8381060295

PV/8381060282

PV/8381061139

PV/8381060288

PV/8381061023

PV/8381061024

PV/8381061033

J40

J40

J40

E30

J30

E50

E50

J50

J50

J50

J50

E75

E75

J85

E100

J90-4

1 \

1 \

1 \

2 \

3 \

4 \

4 \

5 \

5 \

5 \

5 \

6 \

6 \

7 \

8 \

9 \

9 \

10 \

11 \

12 \

13 \

14 \

15 \

16 \

17 \

18 \

40

40

40

40

40

50

50

50

50

50

50

50

50

50

50

80

80

80

80

80

80

100

100

100

100

150

20

20

20

8

11

17

17

25

25

25

25

13

13

15

14

25

25

28

27

40

14

38

45

45

50

76

230

400

400

400

400

230

400

230

230

400

400

400

400

400

400

230

400

400

400

400

400

400

400

400

400

400

1.1

1.1

1.1

2.2

4

1.1

1.1

2.2

2.2

2.2

2.2

4

4

5.5

11

2.2

2.2

4

7.5

4

18.5

4

11

5.5

7.5

11

2900

2900

2900

2900

2900

2900

2900

2900

2900

2900

2900

2900

2900

2900

2900

2900

2900

2900

2900

1450

2900

2900

2900

1450

1450

1450

29

29

29

39

71

27

27

41

41

41

41

96

96

96

200

37

37

75

107

108

240

64

190

190

186

279

965

955

1560

1075

2060

915

895

1100

1830

1090

1895

2035

2630

2440

3425

1140

1125

2205

2990

2415

4715

1605

3940

3765

4140

6030

11/2

11/2

11/2

11/2

11/2

2

2

2

2

2

2

2

2

2

2

3

3

3

3

3

3

4

4

4

4

6

Please note – other models are available upon request, please speak to our sales team for more information.



PIPE CONNECTION

PRICE £

CURVE FLOW RANGE m3/h

MOTOR kW

MAX EFFICIENCY%

PUMP TYPE

CDLK1

CDLK8

CDLK4

CDLK32

CDLK42

CDLK2

CDLK16

CDLK3

CDLK20

G11/4”

G2”

G11/4”

DN65

DN80

G11/4”

G2”

G11/4”

G2”

A \

E \

0.37 – 2.2

0.75 – 7.5

0.4 – 2

5 – 12

44

62

D \

H \

I \

0.37 – 4

1.5 – 30

3 – 45

1.5 – 7

16 – 40

25 – 55

57

73

75

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

B \

F \

0.37 – 3

2.2 – 15

1 – 3.5

8 – 22

46

66

P.O.A.

P.O.A.

C \

G \

0.37 – 3

2.2 – 18.5

1.2 – 4

10 – 28

54

69

P.O.A.

P.O.A.

DELIVERY STATUS

132


CDLK (F) LUBRICANT PUMPS B

A comprehensive range of immersible multi-stage pumps to convey cooling and lubricating liquids for industrial process and machine tools, where high volume and pressure of coolants are required to maintain maximum process efficiency.

Features:


– Head: up to 305m

– Temperature: up to 120°C

– Speed: 2900 / 3500 RPM

– Power: up to 45kW

– Pump head available in cast iron and stainless steel

PERFORMANCE DATA

HEA

D / m

Q / m3/h

300

200

12010080

40

60

20

0 2 4 6 8 12 20 30 60

E H IB

10

A C D F G


www.ttpumps.com / T: +44 (0) 1630 647200

SECTION 06 POTABLE / CLEAN WATER PUMPS

CURVEPRODUCT CODE

PRICE £

WEIGHT kg


OUTPUT

amp mm inchkW

INLET x OUTLET MAXIMUM

KFO 230V PST/KF0/1 1305.2A \ 25 x 250.372.3 1 x 1 40

KFO 400V PST/KF0/3 1305.2A \ 25 x 250.371 1 x 1 40

KF3 230V PST/KF3/1 1758.2B \ 25 x 250.554.5 1 x 1 50

KF3 400V PST/KF3/3 1758.2B \ 25 x 250.551.8 1 x 1 50

KF4 230V PST/KF4/1 185

185

255

255

270

270

9.3C \ 25 x 250.754.8 1 x 1 50

KF4 400V PST/KF4/3 9.3C \ 25 x 250.752.8 1 x 1 50

KF5 230V PST/KF5/1 14.5D \ 25 x 251.19 1 x 1 70

KF5 400V PST/KF5/3 14.5D \ 25 x 251.13.5 1 x 1 70

KF6 230V PST/KF6/1 15.5E \ 25 x 251.511.5 1 x 1 70

KF6 400V PST/KF6/3 15.5E \ 25 x 25

30

30

63

63

75

75

80

80

90

901.511 1 x 1 70

86

06 – POTABLE / CLEAN WATER PUMPS

KF SERIESThe KF Series is an economical transfer pump, for domestic and industrial use. Ideal for clear water without abrasive particles or chemically aggressive substances. Cast iron body, brass peripheral impeller, and stainless steel shaft fitted with a carbon-ceramic mechanical seal.

This series of electric pumps have a peripheral type impeller. These pumps are made this way because on the extremities of the impeller, there are several radial paddles which give more energy to the pumped liquid. The special shaping of the paddles gives the fluid a fast radial recycling motion between the paddles of the impeller and the pump body.

This characteristic enables the fluid pressure to increase progressively from the inlet to the outlet, obtaining a regular and not pulsating flow.

Features:


– Brass impeller

– Mechanical seal in carbon/ceramic


– IP44 motor

A

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

90

80

70

60

50

40

30

20

10

0 0 10 20 30 40 50 60 70 80

A B

C

DE

HEAD m

CAPACITY l/min


CURVEPRODUCT CODE

PRICE £

WEIGHT kg


OUTPUT

amp mm inchkW

INLET x OUTLET

CMP 230V PST/CMP/1 18010A \ 25 x 250.372.3 1 x 1 24 80

CMP 400V PST/CMP/3 18010A \ 25 x 250.371 1 x 1 24 80

CMP76 230V PST/CMP76/1 21012B \ 25 x 250.554.5 1 x 1 30 100

CMP76 400V PST/CMP76/3 21012B \ 25 x 250.551.8 1 x 1 30 100

CMP79 230V PST/CMP79/1 22015C \ 25 x 250.756.8 1 x 1 35 100

CMP79 400V PST/CMP79/3 22015C \ 25 x 250.752.8 1 x 1 35 100

CM1 230V PST/CM1/1 32022.2D \ 25 x 251.19 1 x 1 43 120

CM1 400V PST/CM1/3 32022.2D \ 25 x 251.16 1 x 1 43 120

CM1B 230V PST/CM1B/1 36024.3E \ 25 x 251.68.3 1 x 1 52 120

CM1B 400V PST/CM1B/3 36024.3E \ 25 x 251.64.8 1 x 1 52 120

CM1C 230V PST/CM1C/1 47027F \ 25 x 252.29.7 1 x 1 59 133

CM1C 400V PST/CM1C/3 47027F \ 25 x 252.25.6 1 x 1 59 133

87

CM / CMP SERIESThe CM/CMP is a single stage centrifugal pump for clear water without abrasive particles or chemically aggressive substances. Cast iron pump body, Noryl impeller and stainless steel shaft fitted with ceramic-graphite-NBR mechanical seal. This range posses a hydrodynamic closed impeller design allowing it to achieve its pressure and flow with minimal loss.

Features:


– CMP, CMP76 and CMP79 have a Noryl impeller, CM1, CM1B and CM1C have a brass impeller

– Mechanical seal


– IP44 motor

A

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

60

50

40

30

20

10

0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140

A

B D

E F

C


MAXIMUM

HEAD m

CAPACITY l/min


88

FC SERIESThe FC Series is a centrifugal pump for the drainage of clear water without abrasive particles or chemically aggressive substances. Cast iron pump body and Brass impeller, with stainless steel shaft fitted with ceramic-graphite-NBR mechanical seal.

Features:


– Brass impeller

– Mechanical seal


– IP44 motor

A

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

100

80

60

40

20

0 0 40 80 120 160 200 240 280 320

C

A

D

B

GJ

KL

EF

IH

CURVEPRODUCT CODE

PRICE £

WEIGHT kg


OUTPUT

amp mm inchkW

INLET x OUTLET

FC20-2B 230V PST/FC202B/1 28017.5A \ 25 x 25 39 840.553.2 1 x 1

FC20-2B 400V PST/FC202B/3 28017.5A \ 25 x 25 39 840.551.8 1 x 1

FC20-2A 230V PST/FC202A/1 29018B \ 25 x 25 46 840.756.8 1 x 1

FC20-2A 400V PST/FC202A/3 29018B \ 25 x 25 46 840.752.8 1 x 1

FC25-2D 230V PST/FC252D/1 40025C \ 32 x 25 44 1171.19 11/4 x 1

FC25-2D 400V PST/FC252D/3 40025C \ 32 x 25 44 1171.13.5 11/4 x 1

FC25-2F 230V PST/FC252F/1 40025D \ 32 x 25 51 1171.16 11/4 x 1

FC25-2F 400V PST/FC252F/3 40025D \ 32 x 25 51 1171.13.5 11/4 x 1

FC25-2E 230V PST/FC252E/1 45027F \ 32 x 25 61 1331.511.5 11/4 x 1

FC25-2E 400V PST/FC252E/3 45027F \ 32 x 25 61 1331.511 11/4 x 1

FC25-2B 400V PST/FC252B/3 65030G \ 32 x 25 64 1502.25.6 11/4 x 1

FC25-2A 400V PST/FC252A/3 75032H \ 32 x 25 70 16837 11/4 x 1

FC30-2C 400V PST/FC302C/3 110046I \ 40 x 32 74 23549.3 11/2 x 11/4

FC30-2D 400V PST/FC302D/3 110046J \ 40 x 32 83 26749.3 11/2 x 11/4

FC30-2B 400V PST/FC302B/3 114051K \ 40 x 32 89 2705.57.4 11/2 x 11/4

FC30-2A 400V PST/FC302A/3 114058L \ 40 x 32 96 3007.58.8 11/2 x 11/4

FC25-2C 230V PST/FC252C/1 45027E \ 32 x 25 52 1351.511 11/4 x 1

FC25-2C 400V PST/FC252C/3 45027E \ 32 x 25 52 1351.511 11/4 x 1


MAXIMUM

HEAD m

CAPACITY l/min


M SERIESThe M Series is a cost-effective industrial self-priming pump, ideal for domestic use. It permits the transfer / boosting of clear water without abrasive particles or chemically aggressive substances.

Cast iron body, thermoplastic resin and stainless steel shaft fitted with a ceramic-graphite-NBR mechanical seal.

Features:


– Thermoplastic resin impeller

– Self-priming

– Mechanical seal


– IP44 motor

A

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

70

60

50

40

30

20

10

0 0 20 40 60 80 100 120 140 160 180

C

A

B

D

E F

CURVEPRODUCT CODE

PRICE £

WEIGHT kg


OUTPUT

amp mm inchkW

INLET x OUTLET

M50 230V PST/M50/1 18510A \ 25 x 25 33 460.372.3 1 x 1

M50 400V PST/M50/3 18510A \ 25 x 25 33 460.371 1 x 1

M60 230V PST/M60/1 20515.5B \ 25 x 25 47 460.372.3 1 x 1

M60 400V PST/M60/3 20515.5B \ 25 x 25 47 460.371 1 x 1

M70 230V PST/M70/1 21016C \ 25 x 25 52 400.554.5 1 x 1

M70 400V PST/M70/3 21016C \ 25 x 25 52 400.551.8 1 x 1

M80 230V PST/M80/1 22017.5D \ 25 x 25 55 500.756.8 1 x 1

M80 400V PST/M80/3 22017.5D \ 25 x 25 55 500.752.8 1 x 1

M150 230V PST/M150/1 44529E \ 40 x 25 66 681.16 11/2 x 1

M150 400V PST/M150/3 44529E \ 40 x 25 66 681.13.5 11/2 x 1

M200 230V PST/M200/1 46531F \ 40 x 25 68 1001.511.5 11/2 x 1

M200 400V PST/M200/3 46531F \ 40 x 25 68 1001.511 11/2 x 1


MAXIMUM

HEAD m

CAPACITY l/min


90

M SERIES (STAINLESS STEEL)The M SERIES is an economical industrial self-priming, stainless steel pump, ideal for domestic use. It permits the transfer / boosting of clear water without abrasive particles or chemically aggressive substances.

Stainless steel outer casing, thermoplastic resin impeller and stainless steel shaft fitted with a ceramic-graphite-NBR mechanical seal.

Features:


– Thermoplastic resin impeller, stainless steel impeller optional

– Self-priming

– Mechanical seal


– IP44 motor

A

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

70

60

50

40

30

20

10

0 0 10 20 30 40 50 60 70

C

AB

CURVEPRODUCT CODE

PRICE £

WEIGHT kg


OUTPUT

amp mm inchkW

INLET x OUTLET

M94 230V PST/M94/1 3157.8A \ 25 x 250.372.3 1 x 1 39 50

M94 400V PST/M94/3 3157.8A \ 25 x 250.371 1 x 1 39 50

M97 230V PST/M97/1 3258.5B \ 25 x 250.554.5 1 x 1 45 55

M97 400V PST/M97/3 3258.5B \ 25 x 250.551.8 1 x 1 45 55

M99 230V PST/M99/1 3359.3C \ 25 x 250.756.8 1 x 1 48 60

M99 400V PST/M99/3 3359.3C \ 25 x 250.752.8 1 x 1 48 60

OP RANGEA range of horizontal multistage stainless-steel centrifugal pumps suitable for pumping clean water and non-aggressive chemical liquids. Suitable for automatic water distrubution in domestic applications or, thanks to the high head, can be used as a pilot pump for pressurisation units.

Features:


– Models from 0.37kW - 13.5kW


– Max operation pressure: 13 bar

A


MAXIMUM

HEAD m

CAPACITY l/min

CURVE PRICE £


MOTOR RANGE

mm inchkW

INLET x OUTLET

OP 32/R P.O.A.A \ 32 x250.55 - 2.2 11/4 x 1 100 6.5

OP 32 B \ 32 x 250.37 - 2.2 11/4 x 1 101 8

OP 40/R C \ 40 x 320.75 - 2.2 11/2 x 11/2 73.5 11

OP 40 D \ 40 x 400.75 - 2.2 11/2 x 11/2 64.5 14

OP 50 E \ 50 x 503.0 - 7.5 2 x 2 129 24

OP 65 F \ 65 x 654.0 - 7.5 21/2x 21/2 162 40

MAXIMUM

HEAD m

CAPACITY m3/h

OP 100 G \ 100 x 805.5 - 18.5 4 x 3 127.5 110

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

160

140

120

100

80

60

40

20

0 0 6.5 8 11 14 24 40 110

A BC

D

E F

G

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.


91

CHLF RANGEA range of horizontal multistage stainless steel centrifugal pumps suitable for transferring clean and non-abrasive liquids.

Features:

– Made out of high quality anti-corrosive materials: robust 304 stainless steel, 316 on request

– Compact coaxial pump design, float neck ring structure and improved mechanical efficiency and volume efficiency

– Temperature: up to 110°C available on request

– High efficiency motor

– 0.37 – 4.4kW

– 230V & 400V available

– Cast iron (CHLF (T)) also available on request

B

PERFORMANCE DATA

HEA

D / m

Q / m3/h

60

50

40

30

20

15

0 2 4 6 8 10 15 20 30

A BC

D

EF

10

CURVE PRICE £

MOTOR RANGE kW

FLOW RANGE m3/h

PUMP TYPE

mm inch

INLET x OUTLET

CHLF 2 P.O.A.0.37 – 0.75 0.5 – 3.5A \ 25 x 25 1 x 1

CHLF 4 P.O.A.0.55 – 1.1 1 – 7B \ 32 x 25 11/4 x 1

CHLF 8 P.O.A.0.75 – 2.2 5 – 11C \ 40 x 32 11/2 x 11/4

CHLF 12 P.O.A.0.75 – 3 7 – 16D \ 40 x 40 11/2 x 11/2

CHLF 16 P.O.A.1.1 – 4 8 – 22E \ 50 x 50 2 x 2

CHLF 20 P.O.A.1.1 – 4.4 10 – 28F \ 50 x 50 2 x 2

DELIVERY STATUS



92

SWB RANGEThe SWB is a stainless steel horizontal single stage clean water pump for transferring and boosting clean water with no abrasive particles.

This pump is designed to pump clean, non-flammable and non-explosive liquid that contains no solid granules and fibres.

Features:


– Compact pump design, float neck ring structure and improved mechanical efficiency and volume efficiency

– Temperature up to 80°C

– Screwed connections, easy to install


– 0.75 – 1.1kW motor

– 1 1/4” inlet x 1” outlet

A

PRODUCT CODE

FLOW RANGE m3/h

SPEED r/min


SWB 6-18 230V PN/SWB6-18/230V 9.7 2900A \

SWB 6-18 400V PN/SWB6-18/400V 9.7 2900A \

SWB 6-25 230V PN/SWB6-25/230V 12 2900B \

SWB 6-25 400V PN/SWB6-25/400V

PRICE £

500

452

532

484290012B \

MSThe MS are a range of single stage clean water pumps for transferring and boosting clean water with no abrasive particles.

These are designed to pump clean, non-flammable and non-explosive liquids that contains no solid granules and fibres.

Features:

– Made out of high quality anti-corrosive materials: robust 304 stainless steel construction

– Compact pump design, float neck ring structure and improved mechanical efficiency and volume efficiency


– Screwed connections, easy to install


– 0.37 – 2.2kW

A

PERFORMANCE DATA

HEA

D / m

Q / l/min

30

25

20

15

0 0 100 200 300 400

A

B

C

D

E

MSS 60Hz versions available on request.


OUTPUT

amp kW

0.754.45

0.75

1.1

1.1

1.64

6.42

2.48

PN/MS250 4746.0 – 181.5 40 x 32D \

PN/MS250 3826.0 – 181.1 40 x 32D \

PN/MS330 4967.2 – 272.2 50 x 32E \

PN/MS330 4742.2 50 x 32 7.2 – 24E \

PRODUCT CODE

PRICE £

FLOW RANGE m3/h

MOTOR RANGE kW


PN/MS60 3281.2 – 4.80.75 32 x 25A \

PN/MS60 2691.2 – 4.80.55 32 x 25A \

PN/MS60 2481.2 – 4.80.37 32 x 25A \

PN/MS100 3821.1 32 x 25 2.4 – 9.6B \

PN/MS100 2652.4 – 8.40.55 32 x 25B \

PN/MS160 3843.6 – 121.1 40 x 32C \

PN/MS160 3273.6 – 120.75 40 x 32C \

MS250/1.5

MS250/1.1

MS330/2.2

MS330/1.5

PUMP TYPE

MS60/0.75

MS60/0.55

MS60/0.37

MS100/1.1

MS100/0.55

MS160/1.1

MS160/0.75

MS250/2.2 PN/MS250 4692.2 40 x 32

50

50

50

50

FREQUENCY Hz

50

50

50

50

50

50

50

506.0 – 18D \

mm inch

INLET x OUTLET

11/4 x 1

11/4 x 1

11/4 x 1

11/4 x 1

11/4 x 1

11/2 x 11/4

11/2 x 11/4

11/2 x 11/4

11/2 x 11/4

11/2 x 11/4

2 x 11/4

2 x 11/4

PERFORMANCE DATA

HEA

D / m

Q / m3/h

35

30

25

20

15

10

5

0 0 1.5 3 4.5 6 7.5 9 10.5 12

AB


PRODUCT CODE

SPEED r/min


PRICE £

93

SO / SC RANGE A

SC PERFORMANCE DATA

HEA

D / m

Q / m3/h

25

20

15

10

5

0 0 5 10 15 20 25 30 35 40

SO PERFORMANCE DATA

HEA

D / m

Q / m3/h

20

15

10

5

0 0 5 10 15 20 25 30 35 40 45 50 55 60

A

B CD

E

F

G

H

I

Compact stainless steel horizontal single stage centrifugal pumps.

The SO has a semi-open impeller whilst the SC has a closed impeller.

Features:

– SO Open impeller / SC Closed impeller

– Lightweight, compact structure

– Stainless steel parts, make this pump corrosion proof


– 1.1 – 3kW

SO20/1.1 230V PN/SO20/1.1-230V 2900A \ 573

SO25/1.5 230V PN/SO25/1.5-230V 2900B \ 613

SO35/2.2 230V PN/SO35/2.2-230V 2900C \ 660

SO20/1.1 400V PN/SO20/1.1-400V 2900A \ 544

SO25/1.5 400V PN/SO25/1.5-400V 2900B \ 591

SO35/2.2 400V PN/SO35/2.2-400V 2900C \ 629

SO40/3.0 400V PN/SO40/3.0-400V 2900D \ 740

SC15/1.1 230V PN/SC15/1.1-230V 2900E \ 581

SC15/1.5 230V PN/SC15/1.5-230V 2900F \ 618

SC25/1.5 230V PN/SC25/1.5-230V 2900G \ 624

SC25/2.2 230V PN/SC25/2.2-230V 2900H \ 666

SC15/1.1 400V PN/SC15/1.1-400V 2900E \ 551

SC15/1.5 400V PN/SC15/1.5-400V 2900F \ 595

SC25/1.5 400V PN/SC25/1.5-400V 2900G \ 601

SC25/2.2 400V PN/SC25/2.2-400V 2900H \ 635

SC25/3.0 400V PN/SC25/3.0-400V

FLOW RANGE m3/h

5 – 30

5 – 35

5 – 50

5 – 30

5 – 35

5 – 50

5 – 60

5 – 20

5 – 20

5 – 40

5 – 40

5 – 20

5 – 20

5 – 40

5 – 40

5 – 40

MOTOR RANGE kW

1.1

1.5

2.2

1.1

1.5

2.2

3.0

1.1

1.5

1.5

2.2

1.1

1.5

1.5

2.2

3.0 2900I \ 746



SPEED r/min


PRICE £

20QY-1 2900 P.O.A.

20QYB-1 2900 P.O.A.

25QY-2 2900 P.O.A.

25QYB-2 2900 P.O.A.

40QY-6 2900 P.O.A.

40QYB-6 2900 P.O.A.

50QY-12 2900 P.O.A.

50QYB-12 2900 P.O.A.

20QYL-1 2900 P.O.A.

20QYLB-1 2900 P.O.A.

25QYL-2 2900 P.O.A.

25QYLB-2 2900 P.O.A.

40QYL-6 2900 P.O.A.

40QYLB-6 2900 P.O.A.

50QYL-12 2900 P.O.A.

50QYLB-12

FLOW RANGE m3/h

0.4 – 2.8

0.4 – 2.8

1 – 3.5

1 – 3.5

3.5 – 8

3.5 – 8

7.5 – 18

7.5 – 18

0.4 – 2.8

0.4 – 2.8

1 – 3.5

1 – 3.5

3.5 – 8

3.5 – 8

7.5 – 18

7.5 – 18

MOTOR RANGE kW

0.55

0.55

1.1

1.1

3

4

5.5

7.5

0.55

0.55

1.1

1.1

4

4

7.5

7.5 2900

CURVE

A \A \B \B \C \C \D \D \A \A \B \B \C \C \D \D \ P.O.A.

94

QY RANGEStainless steel self-priming gas/liquid pump for ultra-fine 20~30µ size gas bubbles in liquid.

Features:

– Liquid temperature: 15 – 120°C

– Simple design and construction allowing for easy maintenance

– Cast stainless steel wet end

– 0.55 – 7.5kW

– Gas to liquid ratio 1:9

B

B

PERFORMANCE DATA

HEA

D / m

Q / m3/h

100

90

80

70

60

50

40

30

20

10

0 0 0.5 1 2 3 4 5 7 8 12 15 16 18

A B C D

PERFORMANCE DATA

HEA

D / m

Q / m3/h

80

70

60

50

40

30

20

10

0 0 10 20 30 40 50 60 70 80

A

A

B B

BB

B

B

ZS RANGEThe ZS stainless steel horizontal single-stage centrifugal pump is suitable for a wide number of applications. It can transmit various mediums including water or industrial liquid and is suitable for different temperatures, flow rates and a range of pressures.

Features:

– Heavy duty design



– Low maintenance

– 1.1 – 18.5kW motor


– Flanged inlet / outlet

PRICE £

FLOW RANGE m3/h

MODEL MOTOR RANGE kW


ZS50 P.O.A.3 – 201.1 – 5.5A \

ZS65 P.O.A.5 – 701.5 – 18.5B \

FREQUENCY Hz

HEAD m

SPEED r/min

50290016 – 58

502900 – 295011 – 70



95

CDL / CDLF B

A comprehensive range of electrically driven stainless steel vertical multi-stage pumps designed to transfer clean and non abrasive liquids over a wide range of discharge flow rates and pressures.

The inlet and outlet connections are positioned inline and a variety of connections are available on request.

This multifunctional product can be used in a diverse range of applications from domestic water pressurisation to transfer industrial liquids.

The CDLF (all stainless steel construction) can be used for the transfer of corrosive liquids.

Features:


– Head: up to 305m

– Temperature: up to 170°C (high temperature version on request up to 120°C)

– Speed: 2900rpm

– Up to 110kW motor

– Standard motor

– Cartridge mechanical seal design

– WRAS approval on CDLF range


MAX EFFICIENCY %

DIN FLANGEPUMP TYPE MOTOR RANGE kW

MAX PRESSURE bar


PRICE £

CDL / CDLF1 440.37 – 2.2 21.4 DN25A \ P.O.A.

CDL / CDLF2 460.37 – 3 23.2 DN25B \ P.O.A.

CDL / CDLF3 540.37 – 3 21.8 DN25C \ P.O.A.

CDL / CDLF4 570.37 – 4 21.1 DN32D \ P.O.A.

CDL / CDLF8 620.75 – 7.5 20.8 DN40E \ P.O.A.

CDL / CDLF12 631.5 – 11 21.7 DN50F \ P.O.A.

CDL / CDLF16 662.2 – 15 22.2 DN50G \ P.O.A.

CDL / CDLF20 691.1 – 18.5 23.4 DN50H \ P.O.A.

CDL / CDLF32 731.5 – 30 29.2 DN65I \ P.O.A.

CDL / CDLF42 753.0 – 45 30.5 DN80J \ P.O.A.

CDL / CDLF65 764.0 – 45 21.5 DN100K \ P.O.A.

CDL / CDLF85 775.5 – 45 16.8 DN100L \ P.O.A.

CDL / CDLF120 7411 – 75 16.2 DN125M \ P.O.A.

CDL / CDLF150 7311 – 75 15.7 DN125N \ P.O.A.

CDL / CDLF200 8018.5 – 110 15.7 DN150O \ P.O.A.

A selection of alternative bases are available – please speak to our sales team for further information / advice.

OVAL TWO-PIN

THREADED BASE VICTAULIC BASE

PN FLANGED

PERFORMANCE DATA

HEA

D / m

Q / m3/h

150

605040

30

20

15 0.4 0.8 1.6 2.8 4 6 8 12 16 20 30 40 60 80 110 180 240

A B C D E F G H I J K L M N O

100

80


The MK series is a multistage close-coupled vertical electric pump, not self-priming and of minimum dimension which makes it suitable for lifting plants, irrigation systems and other applications where high pressure is required.

Features:

– Cast iron and stainless steel construction

– Liquid temperature: -15°C up to 90°C (120°C on request)

– Bidirectional mechanical seal

96

B


MK SERIES

CHARACTERISTICS

PERFORMANCE DATA

HEA

D / m

Q / m3/h

400

360

320

280

240

200

160

120

80

40

0 2 4 6 8 10 15 20 40 75 110

C D EA B

DIN FLANGEMODEL MOTOR RANGE kW

MAX PRESSURE bar


PRICE £

MK32 0.75 – 5.5 23.4 DN32A \ P.O.A.

MK40 1.5 – 9.2 23.5 DN40B \ P.O.A.

MK50 3.0 – 15.0 25.2 DN50C \ P.O.A.

MK65 5.5 – 30.0 39.2 DN65D \ P.O.A.

MK100 5.5 – 55.0 33 DN100E \ P.O.A.

1.

2.

3.

4.

1. Thrust bearing included in the pump: pump series MK are equipped with a bearing necessary for supporting the axial thrust generated by the pump. This improves pump life and allows to couple to the pump, the standard normalized motors without turning to normalized motor equipped with axial bearing.

2. Normalized mechanical seal: mechanical seals are according to UNI EN 12756 rules. This allows an easy availability in case of need.

3. Shafts supported and guided by bushings in wear proof material

4. Double wear ring: diffusers equipped with double wear ring in self-lubricating material

5. Wide range: 11 families for power up to 55kW available with different shapes, metallurgies and motors

6. Version with frequency converter (up to 15kW)

7. Pumps and motors “Made in Italy”.

8. Pumps and motors to Directive 2009/125/CE (ErP).


A

T-T Autodiver is a submersible motor pump for rainwater supply from cisterns domestic water supply garden irrigation.

Features:

– Integrated pressure switch including dry-run protection

– Suction piece 1” T for connection of floating intake (included in scope of delivery)

– Thermal motor protection and overload protection on separate line

– Impellers and guide wheels made of wear-resistant Noryl

– Max. immersion depth: 15m

– Max. water column above pump: 22m

– Minimum immersion depth for automatic operation: 15cm

– Automatic switch-on and switch-off by integrated pressure switch

– Automatic re-start in case of dry-run protection (4 direct start attempts; after 5h and 24h another 4 start attempts; reset possible by mains separation)

– Easy installation: plug & play

– Slim design (96mm)

– Cooling jacket

– Wear-resistant material

PRESSURE SWITCH

CURVEPRODUCT CODE

PRICE £

WEIGHT kg

CABLE LENGTH

m

DELIVERY STATUS

VOLTAGE OUTPUT

amp mm inchkW

DISCHARGE

PZN/AUTODIVER 230 62012A \ 25 150.85 1 50 5.5

MAXIMUM

HEAD m

CAPACITY m3/h

PERFORMANCE DATA

HEA

D / m

Q / m3/h

60

50

40

30

20

10

0 0 1 2 3 4 5 6

A

97



IR4P32 0.37 – 3.0 2.35 DN32F \ P.O.A.

IR4P40 0.37 – 9.2 4.1 DN40G \ P.O.A.

IR4P50 0.55 – 4.0 2.45 DN50H \ P.O.A.

IR4P65 0.75 – 15.0 4.3 DN65I \ P.O.A.

IR4P80

IR4P100

IR4P125

2.2 – 22.0

5.5 – 30.0

11.0 – 37.0

4.1

3.9

4.0

DN50

DN65

DN65

DN80

DN100

DN125

DN150

DN80

DN100

DN125

J \

K \

L \

P.O.A.

P.O.A.

P.O.A.

OUTLETMODEL MOTOR RANGE kW

MAX PRESSURE bar


PRICE £

IR32 0.75 – 17.0 9.8 DN32A \ P.O.A.

IR40 1.5 – 45.0 12.9 DN40B \ P.O.A.

IR50 2.2 – 30.0 10.0 DN50C \ P.O.A.

IR65 3.0 – 45.0 9.55 DN65D \ P.O.A.

IR80 5.5 – 45.0 6.4

INLET

DN50

DN65

DN65

DN80

DN100 DN80E \ P.O.A.

2900

RPM

2 P

OLE

1450

RPM

4 P

OLE

BIR RANGEThe IR series is ideal for recirculation and air conditioning systems, water supply and pressurisation. The design offers the highest performance in terms of output and efficiency. This pump is a close-coupled end-suction electric pump.

Features:


– Also available in stainless steel, bronze and superduplex stainless steel

– Bidirectional mechanical seal

– Can be positioned horizontally or vertically

PERFORMANCE DATA

HEA

D / m

Q / m3/h

1301201101009080706050403020100

4 8 20 30 55 65 80 120 165 280

A B C D E

PERFORMANCE DATA

HEA

D / m

Q / m3/h

50

40

30

20

10

0 3 6 10 40 60 75 140 230 275 350 450

F

G

H

I J K L

98



L-4P 32 2.35 28 DN32A \ P.O.A.

L-4P 40 2.55 29 DN40B \ P.O.A.

L-4P 50 2.6 40 DN50C \ P.O.A.

L-4P 65 2.5 90 DN65D \ P.O.A.

L-4P 80

L-4P 100

L-4P 150

0.25 – 2.2

0.37 – 2.2

0.37 – 3.0

0.55 – 7.5

1.5 – 18.5

3.0 – 30.0

55.0 – 90.0

4.0

3.9

5.9

160

260

800

DN32

DN40

DN50

DN65

DN80

DN100

DN150

DN80

DN100

DN150

E \

F \

G \

P.O.A.

P.O.A.

P.O.A.

L-4P

RAN

GE (1

450R

PM)

99


Centrifugal electric pumps with in-line inlet and outlet for hot and cold water circulation suitable for installation in civil and industrial plants for heating, cooling, hot water, for sanitary purposes, pressure and other civil and industrial applications.

Features:


– Liquid Temperature: -15°C – 140°C

– Maximum operation pressure: 16 bar

– Selected models available with integral inverter for variable speed operation

L SERIES SINGLE STAGE INLINE PUMPS

OUTLETMODEL MAX PRESSURE bar

MAX Q m3/h


PRICE £

L-2P 25 1.1 11 G11/2A \ P.O.A.

L-2P 32 9.6 30 DN32B \ P.O.A.

L-2P 40 10.2 45 DN40C \ P.O.A.

L-2P 50 9.9 65 DN50D \ P.O.A.

L-2P 65

L-2P 80

L-2P 100

MOTOR RANGE kW

0.18 – 0.37

0.18 – 15.0

0.55 – 18.5

0.55 – 22.0

0.75 – 37.0

2.2 – 37.0

2.2 – 45.0

9.3

6.35

6.05

105

155

210

INLET

DN25

DN32

DN40

DN50

DN65

DN80

DN100

DN65

DN80

DN100

E \

F \

G \

P.O.A.

P.O.A.

P.O.A.

L-2P

RAN

GE (2

900R

PM)

L-2P PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

1101009080706050403020100

0.5 2 4 5 8 11 20 30 45 60 65 105 155 210

BD

C

G

E

F

A

Q / m3/ h

L-4P PERFORMANCE DATAH

EAD

/ m60

50

40

30

20

10

02 3 5 15 20 28 29 40 90 150 160 260 800

CD

E F

G

BA

B


NCB/ZThe NCB/Z is a bare shaft end-suction centrifugal pump also available with a long coupled electric motor and base plate.

The motor unit and the rotating part of the pump can be taken away without removing the pump body from the system piping. This pump is suitable for recirculating plants, heating, air conditioning, water supply and pressurisation.

Features:


– Liquid temperature: -15°C up to 120°C

– IE3 high efficiency motors


B


HEA

D / m

HEA

D / m

Q / m3/h Q / m3/h

1301201101009080706050403020100

70

60

50

40

30

20

10

0 4 8 18 30 60 65 80 135 165 280 400 3 6 10 25 40 60 70 100 140 200 270 400 500 675

A B C D E F

G

H

I

J

K L M N


MAX PRESSURE bar


PRICE £

INLET

NCBZ100 22.0 – 90.0 9.7 DN100F \ P.O.A.DN125

NCBZ4P32 0.37 – 3.0 2.38 DN32G \ P.O.A.DN50

NCBZ4P40 0.37 – 9.2 4.1 DN40H \ P.O.A.DN65

NCBZ4P50 0.55 – 11.0 4.1 DN50I \ P.O.A.DN65

NCBZ4P65 0.75 – 30.0 6.5 DN80 DN65J \ P.O.A.

NCBZ4P80 2.2 – 45.0 6.3 DN100 DN80K \ P.O.A.

NCBZ4P100 5.5 – 75.0 6.48 DN125 DN100L \ P.O.A.

NCBZ4P125 11.0 – 75.0 6 DN150 DN125M \ P.O.A.

NCBZ4P150 30.0 – 90.0 6.3 DN200 DN150N \ P.O.A.

NCBZ32 0.75 – 22.0 9.47 DN32A \ P.O.A.DN50

NCBZ40 1.5 – 45.0 12.9 DN40B \ P.O.A.DN65

NCBZ50 2.2 – 55.0 12.5 DN50C \ P.O.A.DN65

NCBZ65 3.0 – 45.0 9.5 DN65D \ P.O.A.DN80

NCBZ80 5.5 – 75.0 10.2 DN100 DN80E \ P.O.A.2900

RPM

2 P

OLE

1450

RPM

4 P

OLE

NCB = bareshaft pump NCB/Z = pump with motor, coupling & base plate




NCBK/ZAvailable in a wide range of materials the NCBK/Z is a versatile pump that can be installed vertically and horizontally.

The benefit of this pump is the motor unit and rotating part of the pump can be taken away without removing the pump body from the system piping, making maintenance easy.

This model is suitable for recircling plants, heating, air conditioning, heat recovery, and pressurising units.

Features:





– Discharge sizes from DN150- DN300

B


MAX HEAD m


PRICE £

INLET

NCBK/Z 250 - 400 200 - 315 63 DN250F \ P.O.A.DN300

NCBK/Z 250 - 500 250 - 400 97 DN250G \ P.O.A.DN300

NCBK/Z 300 - 400 200 - 315 58 DN300H \ P.O.A.DN350

NCBK/Z 300 - 500 250 - 355 90 DN300I \ P.O.A.DN350

NCBK/Z 150 - 500 110 - 200 94.5 DN150A \ P.O.A.DN200

NCBK/Z 200 - 315 37 - 55 36.8 DN200B \ P.O.A.DN250

NCBK/Z 200 - 400 90 - 160 63.5 DN200C \ P.O.A.DN250

NCBK/Z 200 - 500 200 - 315 95 DN200D \ P.O.A.DN250

NCBK/Z 250 - 315 55 - 110 37.5 DN300 DN250E \ P.O.A.

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

100

90

80

70

60

50

40

30

20

10

0 0 400 800 1200 1600 2000 2400

A

B

CD

E

F

G

H

NCBK = bareshaft pump NCBK/Z = pump with motor, coupling & base plate



SKD/ZThis axial split case pump with double suction impeller is suitable for recircling plants, heating, air conditioning, heat recovery, fire fighting systems, irrigation and process plants.

The double volute design has many benefits, including, low vibration and no shaft flexion.

The hydraulic design allows high efficiency and low NPSH.

The cast iron contruction and stainless steel shaft make this pump durable with a long life span.

Features:





– Discharge sizes from DN80-DN500

– Working pressure: up to PN25

B


MAX HEAD m


PRICE £

INLET

SKD 500-550B 110 - 250 22.2 DN500A \ P.O.A.DN600

SKD 500- 550A 200 - 450 41 DN500B \ P.O.A.DN600

SKD = bareshaft pump

SKD/Z = pump with motor, coupling & base plate

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

50

40

30

20

10

0 0 400 800 1200 1600 2000 2400 2800 3200 3600 4000

SKD 500-550A

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

25

20

15

10

5

0 0 1000 2000 3000 4000

SKD 500-550B

750 RPM 1000 RPM




PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

320

300

280

260

240

220

200

180

160

140

120

100

80

60

40

20

0 0 300 600 900 1200 1500 1800 2100 2400

A

BC D

E

FG

H

I

J

K

L

M

NO

P

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

180

160

140

120

100

80

60

40

20

0 0 100 200 300 400 500 600 700 800

SKD 125-170

SKD 125-335


MAX HEAD m


PRICE £

INLET

SKD/Z 200 - 315

SKD/Z 250 - 750/2

45 - 75

800 - 1000

39

218

DN200

DN250

F \

O \

P.O.A.

P.O.A.

DN300

DN300

SKD/Z 200 - 400

SKD/Z 300 - 500

90 - 160

355 - 450

58

87

DN200

DN300

G \

P \

P.O.A.

P.O.A.

DN250

DN400

SKD/Z 200 - 630 200 - 400 135 DN200H \ P.O.A.DN250

SKD/Z 250 - 400 110 - 250 57 DN250I \ P.O.A.DN350

SKD/Z 80 - 355

SKD/Z 250 - 450

15 - 30

160 - 250

45.1

74

DN80

DN250

A \

J \

P.O.A.

P.O.A.

DN150

DN300

SKD/Z 125 - 270

SKD/Z 250 - 560

11 - 22

250 - 450

26

120

DN125

DN250

B \

K \

P.O.A.

P.O.A.

DN200

DN300

SKD/Z 125 - 335

SKD/Z 250 - 630

18.5 - 37

355 - 500

42

145

DN125

DN250

C \

L \

P.O.A.

P.O.A.

DN200

DN300

SKD/Z 150 - 400

SKD/Z 250 - 630/2

37 - 90

900 - 1200

59

318

DN150

DN250

D \

M \

P.O.A.

P.O.A.

DN200

DN300

SKD/Z 150 - 500

SKD/Z 250 - 750

110 - 200

630 - 710

105

176

DN200

DN300

DN150

DN250

E \

N \

P.O.A.

P.O.A.


MAX HEAD m


PRICE £

INLET

SKD 125 - 270 90 - 160 105 DN125A \ P.O.A.DN200

SKD 125 - 335 132 - 315 168 DN125B \ P.O.A.DN200

SKD/Z B1450 RPM 2900 RPM



A

104


DA (duty assist) / DAS (duty assist standby):

– Power: from 0.37 – 110kW

– Manifold: 2” / 50mm – 8” / 200mm

– Delivery: up to 480m3/h

– Pressure: up to 31 bar

– Water temperature: up to 120°C

DAA (duty assist assist) / DAAS (duty assist assist standby):

– Power: from 0.37 – 110kW

– Manifold: 2” / 50mm – 8” / 200mm

– Delivery: up to 720m3/h

– Pressure: up to 31 bar

– Water temperature: up to 120°C

Options:

– Variable speed control with ‘Vasco’ units

– Fixed speed

– 230V or 400V

– Jockey pump facilities

Features:

– Manufactured using the latest pump technology from the ‘CNP’ range of clean water pumps

– Assembled using stainless steel suction and delivery manifolds

– WRAS compliant components

– Fixed and variable speed options are available for efficient operation

– Header tanks are available on request

– Quality assured clean water booster sets

B

A comprehensive range of fixed and variable speed multiple clean water booster sets, designed and manufactured to provide both the required flow and water pressure for your application.

Designed for transfer and pressure boosting of hot and cold water systems. Maintains and regulates constant water pressure throughout your application.

Controlled via either mechanical pressure switches for fixed speed applications, or the ‘Vasco’ variable speed control drive to maintain a constant pressure level during varying flow rate demand.

The Hidro boost range can be manufactured in compliance with common specifications (e,g Irritech).

Bespoke / larger sets available – please ring with your requirements.

BOOSTER SETSThe Booster Sets are made up of a stainless steel pump, connected to a 24 litre tank with a 1” diameter flexible pipe with 90° elbow bend.

The pumps’ start / stop operation is regulated by a smart 10 electronic pressure switch.

Features:

– Automatic start / stop

– Dry run protection

– Adjustable pressure setting

– Pump constructed in stainless steel

– Tank holds 24 litres with EDPM membrane

– Non-return valve on discharge

PERFORMANCE DATA

HEA

D / m

Q / m3/h

60

50

40

30

20

10

0 0 10 20 30 40 50 60 70 80 90 100

D A

B

C

CURVEPRODUCT CODE

PRICE £

WEIGHT kg


OUTPUT

amp mm inchkW

INLET x OUTLET

BOOSTER SET – TT JET X M94 with painted steel tank 230V/1Ph



BOOSTER SET – TT CHLF4-60 with painted steel tank 230V/1Ph

PN/AUTOSMART35/1

PN/AUTOSMART45/1

PN/AUTOSMART-M99

PN/AUTOSMART46/1

470

480

610

610

13

13

13

20

A \

B \

C \

D \

25 x 25

25 x 25

25 x 25

32 x 25

0.37

0.55

0.75

1.1

2.3

4.5

6.8

6.9

1 x 1

1 x 1

1 x 1

400V/3Ph available on request.

11/4 x 1


105


RC floating kit contains strainer, non-return valve, float, suction hose (1.5m) and fittings (only suitable for RC900).

CURVEPRODUCT CODE

PRICE £

WEIGHT kg


OUTPUT

amp mm inchkW

INLET x OUTLET

PM/RC500/1RC500 230V/1Ph 38012A \ 25 x 250.252.6 1 x 1

PM/RC900/1RC900 230V/1Ph 55013B \ 32 x 320.96.3 11/4 x 11/4

PM/RC900/3RC900 400V/3Ph 55013B \ 32 x 320.92.5 11/4 x 11/4

PMS/FSKIT1.5MRC FLOATING SUCTION KIT 1002.9- 32 x 32-- 11/4 x 11/4

RC500 / RC900 A

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

70

60

50

40

30

20

10

0 0 20 40 60 80 100 120

B

A

AT-T WELLThe T-T Well is a cost-effective well pump for the transfer of clear water. This range is ideal for domestic and agricultural use with a max. sand presence of 0.3%. The pump has a Stainless steel body and motor casing, Noryl impeller and stainless steel shaft fitted with a twin silicon carbide mechanical seal.

Features:


– Noryl impeller & diffuser


– Submersion depth max. 50m


– IP68 motor

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

100

80

60

40

20

0 0 10 20 30 40 50 60 70 80

D

B

C

A

E

Note: Complete with float switch.

CURVEPRODUCT CODE

PRICE £

WEIGHT kg

DIAMETER mm

CABLE LENGTH

m


OUTPUT

amp mm inchkW

DISCHARGE

PW/WELL100G

PW/WELL125G

PW/WELL150G

PW/WELL175G

PW/WELL200G

T-T WELL 100G 230V/1Ph



T-T WELL 175 230V/1Ph


17

19

21

24

24

A \B \C \D \E \

32

32

32

32

32

130

130

130

130

130

15 380

15 400

15 420

15 460

15 490

0.53.4

0.64.4

0.85.4

1.06.5

1.27.4

11/4

11/4

11/4

11/4

11/4

The RC500 / RC900 multistage submersible pump is ideal for the transfer and pressurisation of clean water. The pump has a stainless steel construction and impeller with Noryl diffuser.

Available with manual or automatic operation with adjustable float switch.

Features:

– Wells up to 50m deep

– Stainless steel construction & impeller

– Noryl diffuser

– Liquid temperature up to 40ºC


– 0.25 – 0.9kW

– RC500 – manual, RC900 – autoRC900 RC500


106


FS – 4”The FS series uses axial sliding floating impellers which avoid the jam up of the pump even with the presence of sand. This range draws from wells of minimum diameter of 104mm tanks or natural basins.

Features:

– Plastic impeller




– Low maintenance – easy to service

– Maximum liquid temp: 35ºC

– Maximum working pressure: 39 bar

– Maximum liquid depth: 300m

B

NR – 6”The NR series are constructed out of materials that are particulary durable and have a high wear resistance. The pump is suitable for lifting, pressurising and distribution of clean water in civil and industrial installations. This range draws from wells of a minimum diameter of 156mm, tanks or natural basins.

Features:

– Plastic impeller as standard, other materials available on request








PRICE £

WEIGHT kg

MAX PRESSURE

bar

MODEL FLOW RANGE

m3/h

PUMP DIAMETER

mm


MOTOR RANGE

kW

MAXIMUM

FS98-A P.O.A.13 – 2937.20.4 – 2.8100A \

FS98-B

FS98-C

FS98-D

FS98-E

P.O.A.13 – 34

P.O.A.14 – 40

P.O.A.14 – 41

P.O.A.15 – 46

38.5

39

34.2

29.6

0.6 – 3.5

1.5 – 6

2 – 8

5 – 12

100

100

100

100

B \C \D \E \

2.83720.37 – 3

3.5

6

8

12

385

390

342

296

0.37 – 4

0.55 – 5.5

0.55 – 5.5

0.75 – 7.5

HEAD m

CAPACITY m3/h

NR151-F P.O.A.27 – 12734.514 – 34145 – 150F \ 343452.2 – 22

PRICE £

WEIGHT kg

MAX PRESSURE

bar

MODEL FLOW RANGE

m3/h

PUMP DIAMETER

mm


MOTOR RANGE

kW

MAXIMUM

NR151-A P.O.A.26 – 93345 – 14145 – 150A \

NR151-B

NR151-C

NR151-D

NR151-E

P.O.A.26 – 97

P.O.A.27 – 114

P.O.A.27 – 125

P.O.A.29 – 164

35.5

33

29

38.3

9 – 20

12 – 26

14 – 34

20 – 48

145 – 150

145 – 150

145 – 150

145 – 150

B \C \D \E \

143401.5 – 11

20

26

34

48

355

330

290

383

1.5 – 15

2.2 – 18.5

2.2 – 22

4 – 37

HEAD m

CAPACITY m3/h

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

400

350

300

250

200

150

100

50

0 0.4 0.6 1.5 2 2.8 3.5 5 6 8 12

B

D

C

EA

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

400

350

300

250

200

150

100

50

0 5 9 12 14 20 26 34 48

B

D

C EAF

B


107


NS – 4”The NS series pump is suitable for lifting, pressurisation and distribution in civil and industrial applications, autoclave and cistern inlets, washing plants and irrigation systems.

This pump draws from wells with a minimum diameter of 104mm, tanks or natural basins. The pump is available with radial or semi-axial impeller and is constructed of components that have a high wear resistance.

Features:

– Plastic impeller








B

B

NS95 – F P.O.A.15 – 4511.511 – 25100H \ 251151.1 – 7.5

NS95 – E P.O.A.16 – 4917.79 – 20100G \ 201771.1 – 7.5

NS95 – DA P.O.A.14 – 4222.85 – 11100F \ 112280.75 – 5.5

PRICE £

WEIGHT kg

MAX PRESSURE

bar

MODEL FLOW RANGE

m3/h

PUMP DIAMETER

mm


MOTOR RANGE

kW

MAXIMUM

NS95 – K P.O.A.12 – 2731.60.8 – 2100A \

NS95 – A

NS95 – X

NS95 – B

NS95 – C

P.O.A.12 – 27

P.O.A.11 – 28

P.O.A.11 – 31

P.O.A.10 – 30

31.4

24.1

27.9

21.4

0.8 – 3.2

1.25 – 5

1.6 – 6.3

2.5 – 8

100

100

100

100

B \C \D \E \

23160.37 – 2.2

3.2

5

6.3

8

314

241

279

214

0.37 – 3

0.37 – 2.2

0.37 – 4

0.37 – 4

HEAD m

CAPACITY m3/h

PRICE £

WEIGHT kg

MAX PRESSURE

bar

MODEL FLOW RANGE

m3/h

PUMP DIAMETER

mm


MOTOR RANGE

kW

MAXIMUM

S151 – A P.O.A.45 – 23132.612.5 – 60148 – 152A \

S151 – B

S151 – C

P.O.A.45 – 237

P.O.A.69 – 209

28.1

22.4

24 – 72

54 – 90

148 – 152

152

B \C \

603264 – 37

72

90

281

224

4 – 37

5.5 – 37

HEAD m

CAPACITY m3/h

S151 – 6”The S151 series pump is suitable for lifting, pressurisation and distribution in civil and industrial applications, autoclave and cistern inlets, washing plants and irrigation systems.

This pump draws from wells with a minimum diameter of 158mm. The pump is available withemi-axial impeller and is constructed of components that have a high wear resistance.

Features:







– Maximum working pressure: 22.4 bar


Q / m3/ h

PERFORMANCE DATA

HEA

D / m

12 24 54 60 72 90

300

250

200

150

100

50

0

A

CB

PERFORMANCE DATA

HEA

D / m

CAPACITY / Q (m3/hr)

350

300

250

200

150

100

50

0 0 1.25 1.6 2 2.5 3.2 5 6.3 8 9 11 10 25

H

B

DC

G

E F

A


108


PRICE £

WEIGHT kg

MAX PRESSURE

bar

MODEL FLOW RANGE

m3/h

PUMP DIAMETER

mm


MOTOR RANGE

kW

MAXIMUM

S181 – A P.O.A.80 – 39535.124 – 100202A \

S181 – B

S181 – C

S181 – D

P.O.A.86 – 426

P.O.A.88 – 416

P.O.A.93 – 382

36

32.4

25.2

48 – 145

50 – 160

108 – 228

202

202

202

B \C \D \

1003515.5 – 67

145

160

228

360

324

252

7.5 – 92

7.5 – 92

9.2 – 92

HEAD m

CAPACITY m3/h

S181 – 8”The S181 series pump is suitable for lifting, pressurisation and distribution in civil and industrial applications, autoclave and cistern inlets, washing plants and irrigation systems.

This pump draws from wells with a minimum diameter of 210mm. The pump is available withemi-axial impeller and is constructed of components that have a high wear resistance.

Features:









A range of 4” electric multistage submersible borehole pumps specifically designed to operate at high electrical frequencies resulting in expansive duty coverage from each model.

Supplied as a package consisting of pump, surface control module and pressure transducer, the unit requires minimal parameter set up on site, before ‘self tuning’ to optimise its performance and duty point.

Using frequency control enables the system to maintain pressure with respect to demand, therefore reducing energy costs and extending pump life.

Features:


– Resin encapsulated stator

– Built-in integrated inverter module

– Variable speed performance – covering expansive duty requirements

– Easy to commission

4HS

VASCO4HS PUMP SUPPLIED AS A COMPLETE

SET READY FOR INSTALLATION

PRODUCT CODE


4HS – 03/05 230V/1Ph PNA/4HS-03/05

4HS – 03/10 230V/1Ph PNA/4HS-03/10

4HS – 05/04 230V/1Ph PNA/4HS-05/04

4HS – 05/08 230V/1Ph

4HS – 08/03 230V/1Ph

4HS – 08/05 230V/1Ph

PNA/4HS-05/08

PNA/4HS-08/03

PNA/4HS-08/05

PRICE £

WEIGHT kg

1650

2150

1650

2150

1650

2150

OUTPUT

amp kW

1.8 21.2

3.2 23.2

1.8 21

3.2 23

1.8 21

3.2 22

9.5 (max)

16 (max)

9.5 (max)

16 (max)

9.5 (max)

16 (max)

B

B

PERFORMANCE DATA

HEA

D / m

Q / m3/ h

24 48 96 100 108 145 160 228

350

300

250

200

150

100

50

0

B

D

CA

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

180

160

140

120

100

80

60

40

20

0 0 1 2 3 4 5 6 7 8 9 10 11

F \

CURVE

A \B \C \D \E \


109


PRODUCT CODE HEIGHT mm

CONNECTION inch

VESSEL TYPE LENGTH mm

DELIVERY STATUS

PRICE £

BPRESSURE VESSELSDesigned to maintain a predefined liquid pressure, regardless of boost pressure. Horizontal and vertical options available.

Features:

– Interchangeable bladder

– 10 – 16 bar maximum working pressure

– 1.5 & 2 bar standard pre-loading pressure

– Working temperature 10°C/+100°C

– Blue external finish colour

– EPDM rubber membrane

Available with counter flanges lined with polypropylene. This device avoids the contact between water and the counter flange, granting a complete protection from corrosion and acts as a ‘WATER FLOW DEFLECTOR’.

A simple and innovative solution that reduces the installation and maintenance costs and grants duration and reliability.

PRESSURE VESSELCOUNTER FLANGES

VERT

ICAL

10BA

R16

BAR

10BA

R

AV2/10BAR PI/AV2/10BAR -189 29.503/4

AV8/10BAR

AV12/10BAR PI/AV12/10BAR

























PI/AV8/16BAR -

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

316

428

295

295

489

450

656

761

790

774

927

1020

1243

1493

316

428

489

450

656

761

790

774

927

1020

1243

1493

48

52

63

68

100

132

168

188

240

350

425

505

1100

65

70

80

90

110

280

300

400

520

570

800

960

1450

3/4

3/4

3/4

AV5/10BAR PI/AV5/10BAR -304 423/4

HORI

ZON

TAL

AO18/10BAR PI/AO18/10BAR 465305 641

AO24/10BAR PI/AO24/10BAR 492300 681

AO100/10BAR PI/AO100/10BAR 685520 2901

AO200/10BAR PI/AO200/10BAR 915628 54011/4

AO35/10BAR PI/AO35/10BAR 450376 1121

AO50/10BAR PI/AO50/10BAR 570380 1551

AO60/10BAR PI/AO60/10BAR 675385 1881

AO80/10BAR PI/AO80/10BAR 677430 2201

AO150/10BAR PI/AO150/10BAR 915628 42011/4

AO300/10BAR PI/AO300/10BAR 1082

DIAMETER mm

160

200

280

280

280

280 1

365 1

365 1

365 1

410 1

495 1

550 1

600 11/4

650 11/4

750 11/4

200 3/4

280 3/4

280 1

365 1

365 1

365 1

410 1

495 1

550 1

600 11/4

650 11/4

750 11/4

160

280

280

495

600

365

365

365

410

600

650680 66011/4


PI/VX100 PI/IINXEO1T41LA1 -495 1795 690

PI/VX200 PI/IIQXGO1T41LA1 -600 11000 980

PI/HX18 PI/IIGYE11TO1LA1 360280 1310 240

PI/HX24 PI/AO24/10BAR-SS 492280 1310 260

PI/HX50

PI/HX80

PI/AO50/10BAR-SS

PI/AO80/10BAR-SS

570

640

365

420

1

1

380

460

380

480

PI/HX100 PI/IINYE11T41LA1 680500 1530 690

PI/VX80 PI/X80/10BAR-SS -410 1810 480

110


Designed to maintain a predefined liquid pressure, regardless of boost pressure. Horizontal and vertical options available.

Features:

– Interchangeable bladder

– 10 bar maximum working pressure

– 1.5 bar standard pre-loading pressure

– Working temperature 10°C/+100°C

– Stainless steel

– EPDM rubber membrane

Available with counter flanges lined with polypropylene. This new device avoids the contact between water and the counter flange, granting a complete protection from corrosion and acts as a ‘WATER FLOW DEFLECTOR’.

A simple and innovative solution that reduces the installation and maintenance costs and grants duration and reliability.

BPRESSURE VESSELS

STAINLESS STEEL PRESSURE VESSEL

COUNTER FLANGES

PRODUCT CODE HEIGHT mm

CONNECTION inch

VESSEL TYPE DIAMETER mm

LENGTH mm

DELIVERY STATUS

PRICE £

HORI

ZON

TAL

VERT

ICAL

PI/X18 PI/IIGXEOOTO1LA1 -280 1380 220

PI/X24 PI/X24/10BAR-SS -280 1460 240

PI/VX50 PI/X50/10BAR-SS -370 1700 380

The easy to set up and reliable device, T-T Smart 10, 16 and 25 are a pressure controllerfor domestic and industrial use. Designed with usability in mind, this device can be used for pump control, pressure regulation and booster systems.

Features:– Compact, lightweight design – only 0.5kg– Built for reliability– Digital pressure switch, which can completely replace the traditional pressure switch.– Digital pressure switch offers high accuracy and resolution– Dry running protection– Delayed shutdown function– Pressure setting range is adjustable from 0-10 bar (Smart 10), 0-16 bar (Smart 16) and 0-25 bar (Smart 25).

SMART 10

MODEL CODE DELIVERY STATUS

PRICE £

MAX PRESSURE bar

SMART 10 PRESSURE CONTROLLER 10 89PHS/SMART10

16 112PHS/SMART16

25 125PHS/SMART25

SMART 16 PRESSURE CONTROLLER


SMART 10 / SMART 16 / SMART 25 A


The Press 10, 20 and 30 are electronic pressure switches with built-in dry running protection. They have been designed to be fitted to surface mounted pumps or inline from submersible well pumps for boosting water supply and low pressure main. The unit is equipped with a check valve to prevent the pipeline from losing pressure. No taps can be installed between the pump and the Press unit.

Features:

– Up to 10 bar


– Built-in non-return valve

– 230V single phase

– Designed for surface mounted and submersible pumps

INLET / OUTLET mm

MAX amp

WEIGHT kg

PRICE £

CODE DELIVERY STATUS

TEMP °C

MIN – MAX PRESSURE

PUMP START PRESSURE

TYPE

PRESS 10 / 20 / 30

TT PRESS 20 1” x 1” 8 60

2.3 bar – 1.0- 2.3 bar 1.1 PW/PRESS20 90

230V 25mm x 25mm 10 bar

TT PRESS 30 11/4” x 11/4” 8 60

3.0 bar – 1.0 - 3.0 bar 2.2 PW/PRESS30 120

230V 32mm x 32mm 10 bar

TT PRESS 10 1” x 1” 8 60

1.5 bar – 1.0 - 1.5 bar 1.1 PW/PRESS10 90

230V 25mm x 25mm 10 bar

A

Vasco is a purpose built range of variable speed drives, designed to control and protect pumping systems based on changing the motor frequency and pump speed. Vasco units are extremely compact, can be connected to any pump on the market and will control the operation of the pump to maintain a constant desired pump performance (e.g. pressure, flow, temperature etc.)

The easy to configure settings allow the Vasco to determine the most effective duty point for the pumps and system. Body construction is entirely aluminium, making the units solid, lightweight and easily cooled. Protected to IP55, the Vasco units can be installed in virtually any location including humid and dusty environments.

VASCOFeatures:– Energy and cost saving– Simple to install– Increased pump life– Greater reliability– Motor protection and monitoring such as overload and dry running. – Soft start, soft stop function– Improved pump and system efficiency– Motor mounting and wall mounting kits available

VOLTAGE INPUT

VOLTAGE OUTPUT

RATING amps

PRICE £


TYPICAL POWER P2 (kW)

TYPE

VASCO 209 1Ph 1 x 230

VASCO 214 1Ph 1 x 230

1 x 230 9 1.1 PNA/V209 640

PNA/V214 915 1 x 230 9 1.1

3 x 230 7 1.5

3 x 230 11 3.0

VASCO 409 3PH 3 x 400 3 x 400 9 4 PNA/V409 1615

VASCO 406 3PH 3 x 400 3 x 400 6 2.2 PNA/V406 1180

VASCO 414 3PH 3 x 400 3 x 400 14 5.5 PNA/V414 2255

VASCO 418 3PH 3 x 400 3 x 400 18 7.5 PNA/V418 2625

VASCO 425 3PH 3 x 400 3 x 400 25 11 PNA/V425 2755

VASCO 430 3PH 3 x 400 3 x 400 30 15 PNA/V430 3415

VASCO 438 3PH 3 x 400 3 x 400 38 18.5 PNA/V438 4455

VASCO 448 3PH 3 x 400 3 x 400 48 22 PNA/V448 5150

VASCO 465 3PH 3 x 400 3 x 400 65 30 PNA/V465 5945

MOTOR MOUNT KIT 209/214/406/409 N/A N/A N/A N/A PNA/MOTORKIT1 31


MOTOR MOUNT KIT 438/448/465 N/A N/A N/A N/A PNA/MOTORKIT3 375

WALL MOUNT KIT 209/214 N/A N/A N/A N/A PNA/WALLKIT1 58


WALL MOUNT KIT 414/418/425 N/A N/A N/A N/A PNA/WALLKIT3 66

0-16BAR PRESS.SENSOR 4-20MA N/A N/A N/A N/A PNA/PRESS.SENSOR 95

B

111



BACCESSORIES

PRESSURE SWITCH

CODE PRICE £

BAR PHTYPE DELIVERY STATUS

PIS/PM5PRITCPM5 181÷5 1

PIS/PM12PRITCPM12 203÷12 1

PIS/PMT5PRITCPM5/3PH 201÷5 3

PIS/PMT12PRITCPM12/3PH 223÷12 3

PRICE £

DELIVERY STATUS

26

27

28

CONNECTION inch

CODE

1PIS/FMFG0150

1PIS/FMFG0160

1PIS/FMFG0180

1PIS/FMFG01N1

LENGTH mm

500

600

800

1000 30

PRICE £

DELIVERY STATUS

CONNECTION inch

LENGTH mm

1 1272

1 1382

TYPE

3 WAY

5 WAY

CODE

PIS/RAC3V172

PIS/RAC5V182

PRICE £

DELIVERY STATUS

CONNECTION inch

BAR

1/4 MBSP0-16 94

TYPE

4-20mA

CODE

PNA/PRESS.SENSOR

PRICE £

DELIVERY STATUS

Ø DIAMETER mm

TYPE CODE

50 60÷6R6 GAUGE

50 60÷12R12 GAUGE

50 60÷6B6 GAUGE

50 60÷12B12 GAUGE

PRESSURE

PIS/MANAR5206

PIS/MANAR5212

PIS/MANAP5206

PIS/MANAP5212

FLEXIBLE HOSES

PRESSURE GAUGE

WATER CONNECTION (MULTIWAY FITTING)

PRESSURE TRANSDUCER

B6/B12 R6/R12

112



PRODUCT CODEUSAGE FOR MODELS

RED

VESS

ELS

BLUE

VES

SELS

AV2, AV5 PIS/ME012A

AV8, AV12 PIS/ME024A

AV18, AO18 PIS/ME050A


AV35, AV50, AO35, AO50 PIS/ME100A

AV60, AV80, AO60, AO80 PIS/ME150A



AV200, AO200

AV300, AO300

AV500, AO500

AV750, AV1000

AV1500, AO2000

AV3000, AO4000

R2, R5

R8, R12

R18

R24

R35, R50, RV35, RV50

RV60, RV80

RV100, RV120, RV150

RV200, RV250, RV300

RV500

RV750, RV1000

RV1500, RV2000

RV3000, RV4000

PIS/ME500A

PIS/MEN10A

PIS/MEN20A

PIS/MEN30A

PIS/MEN40A

PIS/MEN50A

PIS/ME012R

PIS/ME024R

PIS/ME050R

PIS/ME080R

PIS/ME150R

PIS/ME300R

PIS/ME500R

PIS/ME600R

PIS/MEN10R

PIS/MEN20R

PIS/MEN30R

PIS/MEN40R

MATERIAL

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

EPDM

Ø DIAMETER mm

45

80

80

80

80

80

200

200

200

200

220

250

250

250

45

80

80

80

80

80

200

200

200

220

250

250

PRICE £

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

DELIVERY STATUS

BACCESSORIES

INTERCHANGEABLE BLADDERS

CONNECTION inch

MODEL DIAMETER mm

95

95 1

95 1

145

145

145 1

145 1

260

260

PRODUCT CODE

PIS/CFF095TRF008Z

PIS/CFF095TRF007Z

PIS/CFX095TRX004B

PIS/CFF145TRF008Z

PIS/CFX145TRX008B

PIS/CFF145TRF007Z

PIS/CFX145TRX004B

PIS/CFF260TRF001Z

PIS/CFX260TRX001B

FINISHED

GALVANISED

STAINLESS STEEL

STAINLESS STEEL

GALVANISED

GALVANISED

STAINLESS STEEL

GALVANISED

STAINLESS STEEL

STAINLESS STEEL

PRICE £

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

DELIVERY STATUS

COUNTER FLANGES

3/4

3/4

3/4

11/4

11/4

113



NOTES



www.ttpumps.com / T: +44 (0) 1630 647200

SECTION 08 PUMP ACCESSORIES

134

08 – PUMP ACCESSORIES

BHOSE / FITTINGS

MAXIMUM MAXIMUM PRODUCT WORKING PRODUCT WORKING REFERENCE PRESSURE REFERENCE PRESSURE bar bar

SIZE MEDIUM DUTY HOSE BANDS SUCTION-DELIVERY HOSE BANDS FEMALE BRASS MALE BRASS SUCTION LAYFLAT HOSE (ZINC PLATED) HOSE (ZINC PLATED) HOSETAIL HOSETAIL STRAINER LAYFLAT HOSE SUCTION-DELIVERY (BSP THREAD) (BSP THREAD) (STEEL PLATED) HOSE

1/2” - - - - - - VU/BFHT14 VU/BMHT14 -

£3 £3.50

£4.25 £5.50

£2 £3 £3 £3 £5.80 £6 £13

£2.10 £3 £3.90 £3 £11.50 £12 £14

£2 £3 £4.50 £3 £17.50 £19 £15

£2 £3.40 £6.50 £4.50 £25 £31 £16

£P.O.A. £5.60 £11 £16 £55 £45 £22

£3.60 £16 £12.50 £16 £57 £59 £22

£5 £18 £19 £18 £130 £130 £57

£8.80 £30 £120

£15

6” HU/150LF 4 - HU/150PNR 5 - - - FHU/150STRAINER

8” HU/200LF 4 - - - - - - -

4” HU/100LF 4 HU/HOSEBAND-4 HU/100PNR 5 HU/HOSEBAND-4S VU/BFHT100 VU/BMHT100 FHU/100STRAINER

2 1/2” HU/65LF 3 HU/HOSEBAND-2.5 HU/65PNR 5 HU/HOSEBAND-3 VU/BFHT65 VU/BMHT65 FHU/65STRAINER

3/4” - - - - - - VU/BFHT20 VU/BMHT20 -

1” HU/25LF 3 HU/HOSEBAND-1 HU/25PNR 5 HU/HOSEBAND-1.25 VU/BFHT25 VU/BMHT25 FHU/25STRAINER

1 1/4” HU/32LF 4 HU/HOSEBAND1.25L HU/32PNR 5 HU/HOSEBAND-1.25S VU/BFHT32 VU/BMHT32 FHU/32STRAINER

1 1/2” HU/40LF 4 HU/HOSEBAND-1.5 HU/40PNR 5 HU/HOSEBAND-1.5S VU/BFHT40 VU/BMHT40 FHU/40STRAINER

2” HU/50LF 3.5 HU/HOSEBAND-2 HU/50PNR 5 HU/HOSEBAND-2S VU/BFHT50 VU/BMHT50 FHU/50STRAINER

3” HU/80LF 4 HU/HOSEBAND-3L HU/80PNR 5 HU/HOSEBAND-3S VU/BFHT80 VU/BMHT80 FHU/80STRAINER


PUMP ACCESSORIES – 08

135

BHOSE COUPLINGS

LIGHT DUTY PLASTIC COUPLING LIGHT DUTY ALUMINIUM HOSE COUPLING

SIZE MALE LEVER RING FEMALE 0-RING COMPLETE FLANGED FLANGED MALE FEMALE SET MALE FEMALE COUPLING COUPLING NP16 NP16 BSP THREAD BSP THREAD A B C D A / B / C / D E F G H

1” HU/QRHC/ABS-1 £2.50

SIZE TYPE PRICE DELIVERY STATUS

11/4” HU/QRHC/ABS-1.25 £3

11/2” HU/QRHC/ABS-1.5 £3.50

2” HU/QRHC/ABS-2 £4

3” HU/QRHC/ABS-3 £5

4” HU/QRHC/ABS-4 £6.50

SIZE TYPE PRICE DELIVERY STATUS

1” HU/QRHC/ALU-1 £3.50

11/4” HU/QRHC/ALU-1.25 £4

11/2” HU/QRHC/ALU-1.5 £5

2” HU/QRHC/ALU-2 £6

3” HU/QRHC/ALU-3 £7

4” HU/QRHC/ALU-4 £8.50

2” HU/MHC50-GALV HU/LR50 HU/FHC50-GALV HU/OR50 HU/HC50-COMP HU/FMHC50 HU/FFHC50 HU/MHC50 HU/FHC50

£14 £20 £20 £2.95 P.O.A. £105 £85 £49 £37

£40 £29 £33 £4.95 P.O.A. £135 £135 £105 £65

£45 £68 £51 £9.95 P.O.A. £250 £160 £115 £74

£68 £90 £90 £19.95 P.O.A. £490 £330 £210 £135




£250 £180 £180 £24.95 P.O.A. £570 £480 £300 £210




136

CAMLOCK FITTINGS

TYPE A TYPE B TYPE C TYPE D TYPE E TYPE F

DESCRIPTION

50mm CAMLOCK FITTINGS

DESCRIPTION TYPE PRICE £

STOCK REFERENCE

HU/FTP75

HU/MLC75

HU/HTC75

HU/FLC75

HU/HT75

HU/MHP75

80mm FEMALE CAMLOCK THREADED PLUG BSPP

80mm MALE CAMLOCK LEVER COUPLING BSPP

80mm CAMLOCK HOSETAIL LEVER COUPLING

80mm FEMALE CAMLOCK LEVER COUPLING BSPP

80mm CAMLOCK HOSETAIL PLUG

80mm MALE THREADED CAMLOCK PLUG BSPP

TYPE A

TYPE B

TYPE C

TYPE D

TYPE E

TYPE F

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

DELIVERY STATUS


TYPE PRICE £

STOCK REFERENCE

HU/FHP50

HU/MLC50

HU/HTC50

HU/FLC50

HU/HT50

HU/MHP50

50mm FEMALE THREADED CAMLOCK PLUG BSPP






TYPE A

TYPE B

TYPE C

TYPE D

TYPE E

TYPE F

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

DELIVERY STATUS


DESCRIPTION TYPE PRICE £

STOCK REFERENCE

HU/FTP100

HU/MLC100

HU/HTC100

HU/FLC100

HU/HT100

HU/MHP100

100mm FEMALE CAMLOCK THREADED PLUG BSPP






TYPE A

TYPE B

TYPE C

TYPE D

TYPE E

TYPE F

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

P.O.A.

DELIVERY STATUS

C



137

Universal flanged discharge bends come complete with male BSP threaded connection to allow for various discharge configurations. Supplied with fixing bolts and EPDM gasket.

CDISCHARGE BENDS

PUMP WITH DISCHARGE BEND DISCHARGE BENDS

PRICE £

MODEL/CODE DELIVERY STATUS

A4/12415 85

A4/12414 50

A4/12416

PES/BEND75

PES/BEND100

95

85

120

PUMP TYPE

GRN, DGO, MAI, SMI, DGN, T-T305, T-T510, MAN, DGP, SMP, PTS 80 MODELS

DN80 PN10 – 16 DISCHARGE BEND



T-T 305, 505, 510

T-T 1008, 1409

T-T 305, 505, 510 80MM DISCHARGE BEND

T-T 1008, 1409 100MM DISCHARGE BEND

DGN, MAN, DGP, SMP, PTS100, T-T1008 & T-T1409 MODELS


NIPPLES, SOCKETS AND BUSHES

DESCRIPTION

25mm HEX NIPPLE MSG

40mm HEX NIPPLE MSG

MODEL/CODE

ZU/NIP-40-HEX

ZU/NIP-50-HEX

ZU/NIP-32-HEX

ZU/NIP-25-HEX

32mm HEX NIPPLE MSG

50mm HEX NIPPLE MSG

DELIVERY STATUS

PRICE £

4.50

9.50

9

15

HEX NIPPLES

DESCRIPTIONMODEL/CODE

50 x 25mm REDUCING NIPPLE MSG

ZU/240-50X40MSG

ZU/240-50X25MSG

50 x 40mm REDUCING NIPPLE MSG

DELIVERY STATUS

PRICE £

18

18

REDUCING NIPPLES

20mm SOCKET MSG

100mm MALE X 80mm FEMALE RED. BUSH GALV

ZU/270-20MSG

ZU/241-100X80MSG

25mm SOCKET MSG

50mm MALE X 32mm FEMALE RED. BUSH MSG

ZU/270-25MSG

ZU/241-50X32MSG

40mm SOCKET MSG


ZU/270-32MSG

ZU/241-50X40MSG

ZU/270-50MSG

ZU/241-80X65MSG

ZU/270-40MSG

ZU/241-65X50MSG

32mm SOCKET MSG


50mm SOCKET MSG


DELIVERY STATUS

DELIVERY STATUS

DESCRIPTION

DESCRIPTION

MODEL/CODE

MODEL/CODE

4

70

4.50

12.50

9.50

18

4.50

12.50

18

70

PRICE £

PRICE £

SOCKETS

BUSHES




The auto-coupling is fixed to the bottom of the pump chamber and allows the pump to be raised and lowered without emptying the chamber, making repairs and maintenance of the pump much easier and more cost-effective.

The mobile section, an integral part of the pump, descends on the guide-rails connected to the fixed part of the device at the bottom of the chamber, until it self-locates in the correct operating position.

Features:

– Easy to lift pump for cleaning / maintenance

– Robust construction

– Consists of pedestal, claw and upper guiderail support brackets

– Stainless steel available upon request

C

INTERNAL DIAMETER

DELIVERY STATUS

3/4” NB

2” NB

2” NB

Please note, other size couplings are available on request.

TYPE

DN 80

DN 200

DN 150

DN 300

DN 50

DN 100

DN 250

CODE

PZS/80-A/COUP

PZS/200-A/COUP

PZS/150-A/COUP

PZS/300-A/COUP

PZS/50-A/COUP

PZS/100-A/COUP

PZS/250-A/COUP

SIZE

2” / 50mm

4” / 100mm

10” / 250mm / 12” / 300mm

3” / 80mm

8” / 200 / 10” / 250mm

6” / 150mm / 8” / 200mm

12” / 300mm / 14” / 350mm

2” NB

2” NB

2” NB

PRICE £

180

330

2800

270

2050

1250

P.O.A.3” NB

WEIGHTkg

11

31

186

28

151

116

285

Fitted on the pump body within a lifting station, the Flush Valve produces a strong, targetable jet every time the pump is restarted. Capable of removing sediment that can build-up and stop the system, this valve is automatic and adjustable.

This type of revolutionary valve applies the ‘Venturi’ principle. Valve closure can be timed by acting on a transfer regulator fitted between two chambers and the closing time can be adjusted between 30 and 120 seconds.

Features:

– Flanged suction inlet 11/2”

– Cast iron body finished in ecological epoxy vinyl

– Hydraulic operation

– Durable design

– Fully repairable

– Duration of mixing 30 – 120 seconds

FLUSH VALVE C

SIZECODE PRICE £

WEIGHT kg

PUMP TYPE

FLUSHVALVE

PUMP MAXIMUM FLOW RATE (l/min)

PUMP MINIMUM WEIGHT (kG)

A \PZS/FLUSH

70

750 ÷ 17000

16 1350

DELIVERY STATUS

AUTO-COUPLING SETS DUCKFOOT

All data shown are not binding. Zenit reserves the right to change data and dimensions without notice.

2018-05-17Created on:

Data sheet

Page 1 / 1

FLX G40

zenit.com

Rev. 0 - 01-01-2017

Dimensional drawing

Technical characteristics

Accessory code

9004.001

Inlet:

Weight:

GAS 1½”

16 kg

General features Flushing valve [FLX] constructed in cast iron, to be installed directly on the pump casing by means of a threaded coupling. This type of valve operates on the “Venturi” principle and does not require an electricity supply. A regulator allows the valve closure time to be set between 10 and 400 seconds, depending on pit size, pump power or the amount of sedimentto be shifted.

• Cast iron body• Hard-wearing, low-noise rubber balls• Connection to system by means of a diamond-shaped flange compatible with competitor models, or with a 1½” GAS threaded connection• Closure time setting from 10 to 400 seconds• Adjustable-direction jet

All

pro

duct

images a

re indic

ativ

e o

nly

Operating requirements

Total head [m]

Pump minimum weight [Kg]

Pump maximum flow rate [l/min]

Liquid temperature [°C]

Delivery rate [l/min]

5÷20

70

750÷17000

0÷40

100÷17000

Connected pump requirements

55 [2,2

]33

7[1

3,3]

432

[17,

0]

143

[5,6

]

341[13.4]

151[5,9]

157[6,2]

F [x,x

]



C

C

For use when fitting submersible pumps to non T-T duckfoot designs.

Manufactured in heavy-duty cast iron and made as an economical alternative to refitting existing pumping stations.

Features:

– Supplied with NBR rubber seal and stainless steel fasteners

For use with Zenit duckfoot design.

Features:

– Supplied with NBR rubber seal and stainless steel fasteners

PUMP HOOK – 32mm-50mm



CODE PRICE £

WEIGHT kg

PRODUCT DESCRIPTION

50mm ADAPTOR HOOK TO SUIT 3/4” GUIDERAIL NB



150mm ADAPTOR HOOK TO SUIT 2” GUIDERAIL NB



*150 – 300mm+ ADAPTOR HOOK TO SUIT 3” GUIDERAIL NB

PZS/50-P/HOOKNEW

PZS/80-WILLFIT

PZS/100-WILLFIT

PZS/150-WILLFIT

PZS/200-WILLFIT

PZS/250-WILLFIT

PZS/150/3-WILLFIT

2

8

10

19

23

30

19

95

175

220

270

420

480

580

DELIVERY STATUS

CODE PRICE £

WEIGHT kg

PRODUCT DESCRIPTION

50mm ADAPTOR HOOK

80mm ADAPTOR HOOK

100mm ADAPTOR HOOK

PZS/50-P/HOOKNEW

PZS/80-PUMPHOOK

PZS/100-PUMPHOOK

2

8

10

95

175

220

DELIVERY STATUS

PUMP HOOKS WILLFIT

PUMP HOOKS ZENIT




PRODUCT CODE

WEIGHT kg

PRICE £

PUMP TYPE

MILD STEEL GALVANISED LIFTING CHAIN

MILD STEEL D SHACKLE

STAINLESS STEEL D SHACKLE

LIGHT DUTY D SHACKLE

Please note that the stainless steel lifting chain (WU/CHAIN500S/S) and the stainless steel D shackle (WU/D500ST/ST) are not applicable to category C.Nett prices apply.

STAINLESS STEEL LIFTING CHAIN

LIGHT DUTY SUSPENSION CHAIN

WU/CHAIN500

WU/D500MSG

WU/D500ST/ST

WU/DLINK-LD

WU/CHAIN500S/S

WU/CHAIN-LD

500

500

500

500

500

500

12.50

6.25

P.O.A.

12

1.50

2.50

DELIVERY STATUS

LIFTING EQUIPMENT

Lifting chains are available in both galvanised steel and stainless steel with lifting rings at 1 metre intervals. Complete range available in galvanised and stainless steel. All our chains are certified to 500kg. High weight capacity available on request.

C

STAINLESS STEEL LIFTING CHAINSMILD STEEL GALVANISED LIFTING CHAINS

LIGHT DUTY SUSPENSION CHAIN (NO LIFTING RINGS)

MILD STEEL GALVANISED D SHACKLE

STAINLESS STEEL D SHACKLE



FOR HORIZONTAL MOUTING OF PUMP

PTS 150

PTS 150

PTS 80

PTS 80

PTS 100

PTS 100

PCRS/TSV150

PCRS/TSO150

PCRS/TSV80

PCRS/TSO80

PCRS/TSV100

PCRS/TSO100

12

18

3.8

7.4

5.4

10.9

110

240

90

160

96

180

DGO Range PZS/9024.010 2.2 55

PRODUCT CODE

WEIGHT kg

PRICE £

PUMP TYPE

E-FlOW & V-FLOW

FOR VERTICAL MOUTING OF PUMP

APN, GRN, DRN, DGN, MAN, DRF Ranges

DRN, DGI, DGN, GRN, GRP, APN, APP, MAN, GRF, GRN and APF Ranges

T-T1008 – T-T1409

T-T305, T-T505 & T-T510

PBS/E100-0012/A

PZS/9024.007

PZS/9024.006

A3/10747

PES/TT505-STAND

6.4

14.2

3.3

10.8

1.5

125

140

65

180

55

DELIVERY STATUS

The stands are designed to allow the pump to operate correctly within a sump, when an auto-coupling system cannot be used.

PUMP STANDS C

VERTICAL PUMP STAND HORIZONTAL PUMP STAND




www.ttpumps.com / T: +44 (0) 1630 647200

SECTION 09 WATERWORKS VALVES

VALVE TYPE DELIVERY STATUS

DN50

DN65

DN80

DN100

DN125

DN150

DN200

DN250

CODE

TTF/RGV080

TTF/RGV100

TTF/RGV050

TTF/RGV065

TTF/RGV125

TTF/RGV200

TTF/RGV250

TTF/RGV150

TTF/RGV300

PRICE £

107

140

83

97

187

325

506

208

688DN300

DN: Nominal Diameter.

144

09 – WATERWORKS VALVES

Resilient seat wedge gate valve used for pipeline isolation. This valve is suitable for potable water duties and buried service.

Technical specification:

– Standard: EN1074-1&2: 2000 BS 5163 Pt 1&2: 2004 & EN1171:2002 (Cat. 4)

– Range: DN50 – DN300

– Flanges & drillings: BS EN 1092- 2:1987 table 9 (PN16)

– Face to face dimensions: BS EN 558-1: 1986 table 3, basic series 3


– Hydrostatic pressure tests: Seat – 1.1 x PN (17.6 bar) Body – 1.5 x PN (24.0 bar)

– Temperature range: -10°C to 70°C, insulate at 0°C and below

– Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

Features:

– Unique lightweight ductile iron design

– Wedge guides and rolled stem thread for reduced operating friction

– Wax filled fasteners for corrosion resistance

– Stem seals replaceable under pressure

– Body gasket locates within recess to prevent being blown out

– Clockwise closing spindle as standard in EN10088 1.4401 (SS316)

– 100% Full bore and body bosses

– Low maintenance design suitable for buried service

Options:

– Handwheel or stem cap

– Chainwheel

– Position indicator with optional switches

– Anti-clockwise closing spindle

– Bypass assembly

– Alternative flange drillings

B



PRICE £

DN80 TTF/RGV080ISO

TTF/RGV050ISO

TTF/RGV100ISO

TTF/RGV125ISO

TTF/RGV150ISO

DN100

DN125

DN150

TTF/RGV200ISODN200

TTF/RGV250ISO

TTF/RGV300ISO

DN250

DN300

CODEWEIGHT kg

22

10

218

140

26 249

43 297

50 317

65 487

95 668

135 850


145


Resilient seat wedge gate valve with ISO interface used for pipeline isolation, prepared for actuation. This valve is suitable for potable water duties and buried service.


– Standard: EN1074-1&2: 2000 BS 5163 Pt 1&2: 2004 & EN1171: 2002 (cat. 4) & ISO5210


– Flanges & drillings: BS EN 1092- 2:1987 table 9 (PN16)





– Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

Features:


– ISO 5210 mounting pad with precision machined keyed spindle

– Wedge guides and rolled stem thread for reduced operating friction

– Wax filled fasteners for corrosion resistance


– Body gasket locates within recess to prevent blow out

– Clockwise closing spindle as standard

– 100% Full bore and body bosses


Options:

– Electric actuator

– Bevel or spur gearbox


– Bypass assembly


B

DN50


146



– Standard: BS 5163 Pt 1&2: 2004, EN1171: 2002 & EN1074 Pt 1&2:2000


– Flanges & drillings: BS EN 1092-2: 1987 table 9 (PN16)





– Coating: Blue fusion bonded epoxy (WRAS listed)

Features:


– Precision machined copper alloy seat rings

– Durable fusion bonded epoxy coated


– 100% Full bore

– Clockwise closing stem as standard

– Body bosses & drain plug as standard


– WRAS listed materials

Options:


– Chainwheel



– Bypass assembly

- Alternative flange drillings

BMETAL SEAT GATE VALVE DN50 – DN300 PN16


PRICE £

DN50

DN65

DN80

DN100

DN125

DN150

DN200

DN250

CODE

PN16 FLANGE DRILLINGS

AQ/GATE80

AQ/GATE100

AQ/GATE50

AQ/GATE65

AQ/GATE125

AQ/GATE200

AQ/GATE250

AQ/GATE150

AQ/GATE300

WEIGHT kg

23 122

24 132

26 145

284

31 171

310

48 290

58 290

429

87 510

663

131 739

527

186 938

1111

DN300



BS10 IMPERIAL FLANGE DRILLINGS


PRICE £

DN80 AQ/GATE80/SPEC

AQ/GATE100/SPEC

AQ/GATE150/SPEC

AQ/GATE200/SPEC

DN100

DN150

DN200

AQ/GATE250/SPECDN250

AQ/GATE300/SPECDN300

CODEBS10 TABLE

D/E

D

E

E

D

E

Metal seat wedge gate valve used for pipeline isolation. Suitable for potable water, wastewater and sewage duties and buried service.

WEIGHTkg

26

31

58

87

131

186


147


BMETAL SEAT GATE VALVE DN50 – DN300 PN16 WITH ISO INTERFACEMetal seat wedge gate valve with ISO interface used for pipeline isolation. This valve is suitable for water, wastewater and sewage applications.


– Standard: BS 5163 Pt 1&2: 2004 & EN1024 Pt 1&2:2000








Features:


– Precision machined copper alloy seat rings


– Precision machined / keyed spindle

– ISO5210 mounting flange

– 100% Full bore

– Clockwise closing stem as standard

– Body bosses & drain plug as standard

– Robust low maintenance design


Options:




– Bypass assembly



PRICE £

DN80

DN100

DN125

DN150

DN200

DN250

DN300

PN16 FLANGE DRILLINGS

CODE

AQ/GATE125+AQ/ISOF10


AQ/GATE80+AQ/ISOF10


AQ/GATE200+AQ/ISOF14/200



WEIGHT kg

24 248

29 273

45 392

55 392

82 660

125 890

177 1088



BS10 IMPERIAL FLANGE DRILLINGS


PRICE £

DN80 AQ/GATE80/SPEC+AQ/ISOF10

AQ/GATE100/SPEC+AQ/ISOF10

AQ/GATE150/SPEC+AQ/ISOF10

AQ/GATE200/SPEC+AQ/ISOF14/200

DN100

DN150

DN200

AQ/GATE250/SPEC+AQ/ISOF14/250DN250

AQ/GATE300/SPEC+AQ/ISOF14/300DN300

CODEBS10 TABLE

24 387

29 412

55 531

82 565

125 1063

177 1262

D/E

D

E

E

D

E

WEIGHTkg


148


Metal seat wedge gate valve with ISO interface used for pipeline isolation. Suitable for water, wastewater and sewage applications.

BMETAL SEAT GATE VALVE DN350 – DN1200 PN16

Metal seat wedge gate valve with ISO interface used for pipeline isolation. Suitable for water, wastewater and sewage applications.

BMETAL SEAT GATE VALVE DN350 – DN1200 PN16 WITH BYPASS

Technical specification:– Standard: BS 5163 Pt 1&2: 2004 & EN1074 Pt 1&2:2000– Range: DN350 – DN1200– Flanges & drillings: BS EN 1092-2: 1987 table 9 (PN16)– Face to face dimensions: BS EN 558-1: 1986 table 3, basic series 3

Technical specification:– Standard: BS 5163 Pt 1&2: 2004 & EN1074 Pt 1&2:2000– Range: DN350 – DN1200– Flanges & drillings: BS EN 1092-2: 1987 table 9 (PN16)– Face to face dimensions: BS EN 558-1: 1986 table 1, basic series 19

– Maximum working pressure: 16 bar– Hydrostatic pressure tests: Seat – 1.1 x PN (17.6 bar) Body – 1.5 x PN (24.0 bar)– Temperature range: -10°C to 70°C, insulate at 0°C and below– Coating: Blue fusion bonded epoxy (WRAS listed)

– Maximum working pressure: 16 bar– Hydrostatic pressure tests: Seat – 1.1 x PN (17.6 bar) Body – 1.5 x PN (24.0 bar)– Temperature range: -10°C to 70°C, insulate at 0°C and below– Coating: Blue fusion bonded epoxy (WRAS listed)

Features:– Unique ductile iron design – Stem seals replaceable under pressure – ISO 5210 mounting flange – 100% Full bore – Clockwise closing stem as standard – Air release as standard – Low maintenance design suitable for buried service – Handwheel or cap operated stem– Bevel and spur gearboxes available

Features:– Unique ductile iron design – Stem seals replaceable under pressure – ISO 5210 mounting flange – 100% Full bore – Clockwise closing stem as standard – Air release as standard – Low maintenance design suitable for buried service – Handwheel or cap operated stem– Bevel and spur gearboxes available

CODE

AQ/GATE450

AQ/GATE500

AQ/GATE350

AQ/GATE400

AQ/GATE600

AQ/GATE800

AQ/GATE900

AQ/GATE700

AQ/GATE1000

AQ/GATE1200

WEIGHT kg

235

300

385

495

725

995

1340

1960

2950

4200

PRICE £

2600

3200

4300

5550

8200

12700

16750

25200

34600

5400

VALVE TYPE

DN350

DN400

DN450

DN500

DN600

DN700

DN800

DN900

DN1000

DN1200

DN: Nominal Diameter

DELIVERY STATUS

3025

3900

5400

6700

9500

14200

19750

30000

42000

63000

PRICE £

CODE

AQ/GATE450BP

AQ/GATE500BP

AQ/GATE350BP

AQ/GATE400BP

AQ/GATE600BP

AQ/GATE800BP

AQ/GATE900BP

AQ/GATE700BP

AQ/GATE1000BP

AQ/GATE1200BP

WEIGHT kg

332

412

567

707

1041

1341

1845

2235

3490

5730

VALVE TYPE

DN350

DN400

DN450

DN500

DN600

DN700

DN800

DN900

DN1000

DN1200


DELIVERY STATUS


149


BMETAL SEAT GATE VALVE DN80 – DN300 PN25Metal seat wedge gate valve used for pipeline isolation. Suitable for potable water, wastewater and sewage duties and buried service.


– Standard: BS 5163 Pt 1&2: 2004 & EN1171: 2002








Features:


– WRAS listed fusion bonded epoxy coated


– 100% Full bore

– Clockwise closing spindle as standard

– Corrosion resistant construction

– Integral feet to facilitate safe storage

– Robust low maintenance design suitable for buried service

Options:




– Chainwheel



– Bypass assembly



PRICE £

CODEWEIGHT kg


DN80 AQ/GATE80/PN2527 199

DN100 AQ/GATE100/PN2535 249

DN150 AQ/GATE150/PN2564 454

DN100 AQ/GATE200/PN25101 673

DN200 AQ/GATE250/PN25144 988

DN300 AQ/GATE300/PN25204 1478


PRICE £

CODEWEIGHT kg


DN80 AQ/GATE80/PN25+AQ/ISOF1025 301

AQ/GATE100/PN25+AQ/ISOF10DN100 33 351

AQ/GATE150/PN25+AQ/ISOF10DN150 62 555

AQ/GATE200/PN25+AQ/ISOF14/200DN200 99 803



Technical specification:– Standard: BS 5163 Pt 1&2: 2004 & EN1171: 2002– Range: DN80 – DN300– Flanges & drillings: BS EN 1092- 2:1987 table 10 (PN25)– Face to face dimensions: BS EN 558-1: 1986 table 3, basic series 3– Maximum working pressure: 25 bar– Hydrostatic pressure tests: Seat – 1.1 x PN (27.5 bar) Body – 1.5 x PN (36.0 bar)– Temperature range: -10°C to 70°C, insulate at 0°C and below– Coating: Blue fusion bonded epoxy (WRAS listed)

Features:– Unique lightweight ductile iron design – WRAS listed fusion bonded epoxy coated – Stem seals replaceable under pressure – 100% Full bore – Clockwise closing spindle as standard – Corrosion resistant construction – Integral feet to facilitate safe storage – Robust low maintenance design suitable for buried service

Options:– Electric actuator– Bevel or spur gearbox– Handwheel or stem cap– Chainwheel– Position indicator with optional switches– Anti-clockwise closing spindle– Bypass assembly– Alternative flange drillings

BMETAL SEAT GATE VALVE DN80 – DN300 PN25 WITH ISO INTERFACEMetal seat wedge gate valve used for pipeline isolation. Suitable for potable water, wastewater and sewage duties and buried service.


BWAFER BUTTERFLY VALVEWafer pattern butterfly valve ideal for pipeline isolation and modulation. Suitable for clean water applications up to 90°C.


AQ/BVW50DN50 3 58

AQ/BVW65DN65 3 67

AQ/BVW200DN200 14 328

AQ/BVW250DN250 20 700

AQ/BVW300DN300 30 900

AQ/BVW80DN80 3 75

AQ/BVW100DN100 5 98

AQ/BVW150DN150 7 175

Materials:– Body: Cast iron EN-GJL-400 – Disc: Stainless steel AISI 316– Liner: EPDM – Stem: Stainless steel AISI 316– Bearing: PTFE – Coating: Fusion bonded epoxy resin

Features:– EN593– Replaceable liner – Various disc materials– Various liner materials– Install between PN6/10/16/25 flanges

– Face to face according to EN558 series 20– WRAS approved – Larger sizes on request – Notched lever, handwheel gearbox or actuated operation


PRICE £

CODEWEIGHT kg

150



PRICE £

CODEWEIGHT kg

BLUGGED / TAPPED BUTTERFLY VALVELugged and tapped pattern butterfly valve ideal for pipeline isolation and modulation. Suitable for clean water applications up to 90°C.

Materials:

– Body: Cast iron EN-GJL-400

– Disc: Stainless steel AISI 316

– Liner: EPDM

– Stem: Stainless steel AISI 316

– Bearing: PTFE

– Coating: Fusion bonded epoxy resin

Features:

– EN593

– Replaceable liner

– Various disc materials

– Various liner materials

– Install between PN6/10/16 flanges

– Face to face according to EN558 series 20

– WRAS approved

– Suitable for end of line duty

– Larger sizes on request

– Notched lever, handwheel gearbox or actuated operation

AQ/BVLT50

AQ/BVLT65

AQ/BVLT80

DN50

DN65

DN80

AQ/BVLT100

AQ/BVLT125

DN100

AQ/BVLT150DN150

4 64

4 74

5 83

7

8

124

165

11 200


AQ/BVLT200DN200

AQ/BVLT250DN250

AQ/BVLT300DN300

22 390

28 721

38 1050

AQ/BVW125DN125 6 147

DN125


151


Bi-directional, full-bore knife gate valve, having a non-rising spindle and serviceable inline.

Features:

– Bi-directional sealing, seals irrespectively of flow direction

– Full-bore to allow high flow rates with low pressure drop

– Wafer semi-lugged one-piece ductile iron body

– Stainless steel chamfered edged polished gate to effectively cut through media

– Stainless steel non-rising stem with rolled thread form to reduce friction

– No internal cavities avoids sediment accumulation

– Adjustable gland follower allowing in-service maintenance

– U-shaped NBR seal in one-piece


– O-ring on raised-face for flange joint integrity

– Handwheel operated (cap and ISO5210 input interface on request)

B

B

BI-DIRECTIONAL KNIFE GATE VALVE

DELIVERY STATUS

PRICE £

AQ/KGVBI80

AQ/KGVBI100

AQ/KGVBI125

AQ/KGVBI150

AQ/KGVBI200

AQ/KGVBI250

CODEWEIGHT kg

10 245

13 300

18 390

23 440

30 660

51 920


AQ/KGVBI300

VALVE TYPE

DN80 KNIFE GATE VALVE






DN300 KNIFE GATE VALVE 63 1125


PRICE £

CODEWEIGHT kg

DN80 TTF/EP80N25 430

TTF/EP100NDN100 35 540

TTF/EP150NDN150 50 910

TTF/EP200NDN200 80 1400

TTF/EP250NDN250 120 2150

TTF/EP300NDN300 125 3100


ECCENTRIC PLUG VALVEThis bi-directional eccentric plug valve can be used for wide-ranging flow control and isolation applications. Fields of use include clean and dirty water, sludge and slurries, sewage and air up to 70°C. Robust design with flow efficient round port offering lower head loss and improved solids handling.

Technical Specification:– Range: DN80 – DN300, larger on request– Rated to 16 bar– Flange and drillings: BS EN1092-2: 1987 Table 9 (PN16)– Integral ISO5211 input

Features: – Welded SS316L seat– Fusion bonded epoxy coated ductile iron body– Plug encapsulated in rubber (EPDM or nitrile)– Adjustable stem seal packing– Self-lubricating bronze bearing brushes


B

B

UNI- DIRECTIONAL KNIFE GATE VALVE

UNI- DIRECTIONAL KNIFE GATE VALVE

DOUBLE ACTING PNEUMATIC CYLINDER

DOUBLE ACTING PNEUMATIC CYLINDER

Uni-directional, full-bore knife gate valve, having a rising spindle and serviceable inline.


Features: – Uni-Directional sealing, seals in the direction of flow– Full-bore to allow high flow rates with low pressure drop– Wafer semi-lugged one-piece stainless steel body– Stainless steel (SS316/1.4401) chamfered edged polished gate to effectively cut through media– Stainless steel (SS316/1.4401) protection guards as standard– No internal cavities avoids sediment accumulation

Features: – Uni-Directional sealing, seals in the direction of flow– Full-bore to allow high flow rates with low pressure drop– Wafer semi-lugged one-piece ductile iron body– Stainless steel (SS316/1.4401) chamfered edged polished gate to effectively cut through media– Stainless steel protection guards as standard– No internal cavities avoids sediment accumulation

– Adjustable gland follower allowing in-service maintenance– Chemically resistant FKM Seat– Corrosion resistant construction– Position indicator as standard– Double acting pneumatic cylinder. – Accessories; handwheel, limit switches, solenoid valves, mechanical lockout and extension spindle

– Adjustable gland follower allowing in-service maintenance– Chemically resistant FKM Seat– Corrosion resistant construction– Position indicator as standard– Double acting pneumatic cylinder– Accessories; handwheel, limit switches, solenoid valves, mechanical lockout and extension spindle

DELIVERY STATUS

DELIVERY STATUS

PRICE £

PRICE £

TTF/KGV050DAC316

TTF/KGV050DAC

TTF/KGV065DAC316

TTF/KGV065DAC

TTF/KGV080DAC316

TTF/KGV080DAC

TTF/KGV100DAC316

TTF/KGV100DAC

TTF/KGV150DAC316

TTF/KGV150DAC

CODE

CODE

WEIGHT kg

WEIGHT kg

9

9

390

290

10

10

420

320

12

12

475

350

14

14

620

385

23

23

870

590



VALVE TYPE

VALVE TYPE











152




153

B

B

UNI-DIRECTIONAL KNIFE GATE VALVE

UNI-DIRECTIONAL KNIFE GATE VALVE

HANDWHEEL

HANDWHEEL



Features: – Uni-Directional sealing, seals in the direction of flow– Full-bore to allow high flow rates with low pressure drop– Wafer semi-lugged one-piece ductile iron body– Stainless steel (SS316/1.4401) chamfered edged polished gate to effectively cut through media– Stainless steel rising stem with rolled thread form to reduce friction– No internal cavities avoids sediment accumulation

Features: – Uni-Directional sealing, seals in the direction of flow– Full-bore to allow high flow rates with low pressure drop– Wafer semi-lugged one-piece stainless steel body– Stainless steel (SS316/1.4401) chamfered edged polished gate to effectively cut through media– Stainless steel (SS316/1.4401) rising stem with rolled thread form to reduce friction

– Adjustable gland follower allowing in-service maintenance– Chemically resistant FKM Seat– Corrosion resistant construction– Position indicator as standard– Handwheel– Accessories; limit switches, mechanical lockout and extension spindle

– No internal cavities avoids sediment accumulation– Adjustable gland follower allowing in-service maintenance– Chemically resistant FKM Seat– Corrosion resistant construction– Position indicator as standard– Handwheel. – Accessories; limit switches, mechanical lockout and extension spindle

DELIVERY STATUS

DELIVERY STATUS

PRICE £

PRICE £

TTF/KGV050HW

TTF/KGV050HW316

TTF/KGV065HW

TTF/KGV065HW316

TTF/KGV080HW

TTF/KGV080HW316

TTF/KGV100HW

TTF/KGV100HW316

TTF/KGV150HW

TTF/KGV150HW316

CODE

CODE

WEIGHT kg

WEIGHT kg

6

6

200

280

7

7

220

315

9

9

240

360

11

11

280

425

15

15

310

600



VALVE TYPE

VALVE TYPE













PRICE £

CODEWEIGHT kg

NON RETURN VALVE

AQ/NRV80DN80 20 143

AQ/NRV100DN100 26 183



AQ/NRV150DN150 50 356

AQ/NRV200DN200 96 669

AQ/NRV250DN250 155 821

AQ/NRV300DN300 215 1233


PRICE £

CODEWEIGHT kg

WEIGHT kg

DN50 AQ/NRV50LW15 148

AQ/NRV65LWDN65 20 154

AQ/NRV80LWDN80 22 163

AQ/NRV100LWDN100 28 197

AQ/NRV125LWDN125 41 362

AQ/NRV150LWDN150 52 381

AQ/NRV200LWDN200 98 701

AQ/NRV250LWDN250 163 926

AQ/NRV300LWDN300 223 1357

NON RETURN VALVE WITH LEVER WEIGHT



PRICE £

CODE

DN80 6 92AQ/GUARD80/100

AQ/GUARD80/100DN100 6 92

AQ/GUARD150/200DN150 8 102

AQ/GUARD150/200DN200 8 102

AQ/GUARD250/300DN250 15 151

AQ/GUARD250/300DN300 15 151

NON RETURN VALVE GUARD

154


Features:



– Suitable for horizontal & vertical installation

– Positive hexagonal drive between shaft & hanger

– Optional external lever arm & weight assembly

– Bypass bosses and 1/2” BSP air release as standard


– Safety guards available

METAL SEAT SWING CHECK VALVE DN80 – DN300 PN16Metal seat swing check valve used to prevent reverse flow. Suitable for potable water, wastewater and sewage applications.


– Standard: BS EN1074 pt 3: 2000, BS EN12234: 2001 & BS 5153: 1974


– Flanges & drillings: BS EN 1092-2:1987 table 9 (PN16)

– Face to face dimensions: BS EN 558-1:1986 table 10, basic series 10





B



NON RETURN VALVE IMPERIAL DRILLINGS

DELIVERY STATUS

PRICE £

AQ/NRV80/SPEC

AQ/NRV100/SPEC

AQ/NRV150/SPEC

AQ/NRV200/SPEC

AQ/NRV250/SPEC

AQ/NRV300/SPEC

VALVE TYPE

DN80

DN100

DN150

DN200

DN250

DN300

CODE WEIGHT kg

BS10 TABLE

22 312D/E

28 347D

52 532E

98 890E

163 1090D

223 1546E

155


BMETAL SEAT SWING CHECK VALVE DN80 – DN300, DRILLED BS10 D/EMetal seat swing check valve used to prevent reverse flow. Suitable for potable water, wastewater and sewage applications.

Technical specification:– Standard: BS EN1074 pt 3: 2000, BS EN12234: 2001 & BS 5153: 1974 – Range: DN80 – DN300 – Flanges & drillings: 10 table D/E– Face to face dimensions: BS EN 558-1:1986 table 10, basic series 10– Maximum working pressure: 16 bar– Hydrostatic pressure tests: Seat – 1.1 x PN (17.6 bar) Body – 1.5 x PN (24.0 bar)– Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (WRAS listed)

Features:– Unique lightweight ductile iron design – Durable fusion bonded epoxy coated – Suitable for horizontal & vertical installation – Positive hexagonal drive between shaft & hanger – External lever arm & weight assembly – Bypass bosses and 1/2” bsp air release as standard – Robust low maintenance design – Safety guards available


NON RETURN VALVE GUARD


PRICE £

DN80 6 92AQ/GUARD80/100

AQ/GUARD80/100

AQ/GUARD150/200

AQ/GUARD150/200

DN100 6 92

DN150 8 102

DN200 8 102

AQ/GUARD250/300DN250 15 151

AQ/GUARD250/300DN300 15 151

CODEWEIGHT kg


AQ/RCV500DN500 1020 16500

AQ/RCV600DN600 1270 20600

VALVE TYPE

VALVE TYPE

DELIVERY STATUS

DELIVERY STATUS

PRICE £

PRICE £

CODE

CODE

WEIGHT kg

WEIGHT kg

DN350

DN50

AQ/NRV350LW

AQ/RCV50

320 3700

20 525

AQ/NRV400LW

AQ/RCV80

DN400

DN80

440 5200

40 900

AQ/NRV450LW

AQ/RCV100

DN450

DN100

580 7500

50 1075

AQ/NRV500LW

AQ/RCV150

DN500

DN150

700 9750

115 2475

AQ/NRV600LW

AQ/RCV200

DN600

DN200

930 13500

135 3000

AQ/NRV700LW

AQ/RCV250

DN700*

DN250

1500 19750

230 4830

AQ/NRV800LW

AQ/RCV300

DN800*

DN300

2050 28000

320 6650

AQ/NRV900LW

AQ/RCV350

DN900*

DN350

2600 38000

420 7950

AQ/NRV1000LW

AQ/RCV400

DN1000*

DN400

3200 59000

590 10500

AQ/NRV1200LW

AQ/RCV450

DN1200*

DN450

4200 95000

800 12700

156


Features:– Unique lightweight ductile iron design – Durable fusion bonded epoxy coated – Suitable for horizontal & vertical installation – Positive drive between shaft & hanger – Guarded external lever arm & weight assembly as standard– 1⁄2” BSP air release as standard – Robust low maintenance design

Features:

– Angled seat for rapid closure

– Robust compact ductile iron design

– Inspection cover

– Gunmetal seats

– Stainless steel shaft

– By-pass, flow sensing switch and multi door options on request

METAL SEAT SWING CHECK VALVE DN350 – DN1200 PN16

RECOIL CHECK VALVE

Metal seat swing check valve used to prevent reverse flow. Suitable for potable water, wastewater and sewage applications.

This single door non-slam recoil swing check valve is suited to systems in which rapid flow reversal exists. Suitable for potable and waste water applications.

Technical specification:– Standard: BS EN1074 pt 3: 2000, BS EN12234: 2001 & BS 5153: 1974 – Range: DN350 – DN1000 – Flanges & drillings: BS EN 1092-2:1987 table 9 (PN16) – Maximum working pressure: 16 bar– Hydrostatic pressure tests: Seat – 1.1 x PN (17.6 bar) Body – 1.5 x PN (24.0 bar)– Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (WRAS listed)

Technical specification:– Standard: BS EN12334– Range: DN50 – DN600 – Flanges & drillings: BS EN 1092-2:1987 table 9 (PN16) – Maximum working pressure: 16 bar– Hydrostatic pressure tests: Seat – 1.1 x PN (17.6 bar) Body – 1.5 x PN (24.0 bar)– Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (WRAS listed)

DN: Nominal Diameter. *Not WRAS approved but WRAS listed materials.


B

B


157


B

The Ballbrake is a self-acting ball check valve rated to 10 bar. Suitable for water and wastewater applications to 60°C. Available in two variants; either with a sinking ball or a floating ball. The full-bore body with smooth internal profile ensures low pressure loss and reduces risk of material deposits.

Technical Specification:

– Certified to EN12050-4

– Pressure rating: 10 bar

– DN25 to DN65: BSP female threaded connections

– DN80 to DN200: Flanged BS EN 1092-2 Table 8 (PN10)

Features:

– Self cleaning

– Epoxy coated iron full-bore body

– Nitrile encapsulated ball

– Robust compact design


PRICE £

CODEWEIGHT kg

DN25 SINKING TTF/BCV25S3 90

TTF/BCV25FDN25 FLOATING 4 P.O.A.

TTF/BCV32SDN32 SINKING 4 90






TTF/BCV150S

TTF/BCV200S

DN150 SINKING

DN200 SINKING

59

109

804

1607


PRICE £

CODEWEIGHT kg

150 x 150 AQ/PSTK30415016 825

AQ/PSTK304225

AQ/PSTK304300

225 x 225

300 x 300

20

25

P.O.A.

P.O.A.

PENSTOCKBi-directional penstock fabricated in AISI304 stainless steel, flush invert, non-rising stem and suitable for 6 MwC.

Features:

– Bi-directional with resilient sealing to all sides

– Fabricated in stainless steel to EN10088 1.4301 (304) or 1.4401 (316) with complementing fasteners

– Non-rising rolled stainless steel spindle, rising spindle on request

– Self-cleaning high-density polyethylene gate guides for reduced friction

– Self-adjusting EPDM seals for optimal sealing performance

– Seating pressure: 6MwC on/off seat

– Range: 150mm x 150mm to 300mm x 300mm (larger on request)

B





PRICE £

CODEWEIGHT kg

DN50 118AQ/WCV501

AQ/WCV65DN65 1282

AQ/WCV80DN80 1463

AQ/WCV100DN100 1744

AQ/WCV125DN125 2316

AQ/WCV150DN150 2758

AQ/WCV200DN200 44214

AQ/WCV250DN250 71522

AQ/WCV300DN300 91034

DUAL PLATE CHECK VALVEDouble plate check valve used to prevent reverse flow rated to 16 bar. Suitable for clean water applications up to 100°C.

Materials:

– Body: Cast iron EN-GJL-250

– Plates: Stainless steel AISI 304

– Seal: EPDM

– Spring: Stainless steel AISI 316

– Coating: Fusion bonded epoxy resin

Features:

– Minimum head loss

– Stainless steel plates / spring

– Compact robust design

– Install between PN6/10/16 flanges

– On request: Larger sizes, Viton® seat, stainless steel body, rated 25 bar or WRAS approval

158


AQ/FLAP500DN500 68 1013

AQ/FLAP600DN600 93 1240


PRICE £

CODEWEIGHT kg

DN80 AQ/FLAP805 68

AQ/FLAP100DN100 6 96

AQ/FLAP150DN150 11 143

AQ/FLAP200DN200 16 203

AQ/FLAP225DN225* 20 258

AQ/FLAP250DN250 23 296

AQ/FLAP300DN300 32 403

AQ/FLAP350DN350/375* 34 558

AQ/FLAP400DN400 49 609

AQ/FLAP450DN450 56 800


BDOUBLE HINGE FLAP VALVEMetal seat double hinge flap valve with circular aperture to prevent reverse flow in outfall applications. Typically utilised in river, surface / storm water and treatment works outfalls.



– Drillings: BS EN 1092-2 1987 table 9 (PN16). *BS10 table D

– Maximum pressure: 6.0 metres static on-seat head


Features:


– Double hinge for optimal sealing


– Anti-tamper stainless steel hinge pins

– Bushed hinge links


– Lifting eye as standard

– Drilled to suit flange & wall mounting

B


159


The Floaway® anti-flood valve is a simple yet effective backflow prevention valve for use within both domestic and commercial applications to prevent reverse flow of sewage and wastewater from the drainage network.

The Floaway® is an inline self-acting device with a manual lockable door. The design of the valve incorporates smooth walls with rounded corners to prevent solids accumulating and to avoid septic odour.

There is also a Floaway® anti-flood valve with double flap now available. This features a double self-acting flap (one lockable) reinforced with stainless steel.

Applications:

– Low lying areas susceptible to flooding

– Protection from undersized sewers at high flowrates

– Pumping stations

– Rodent ingress reduction

Features:

– European standard EN13564-1:2002

– Conforms to building regulation part h1 section 2.8 – 2.12

– Manual lockable door

– Lightweight and robust PVC body

– Stainless steel internal flap

– Large inspection cover

– Easy installation


PRICE £

CODEOUTLET mm

ET110 VA/ABS110NRV110

VA/ABS160NRVET160 160

VA/ABS110NRVDDET110 DOUBLE 110

WEIGHT kg

1.9 55

1.9 93

1.9 100

B


160


COMPACT WASTEWATER AIR VALVECompact double orifice air valve having three functions:

– Efficient release of gas to prevent pressure build-up

– Ingress of gas to prevent vacuum in the pipe system

– Controlled bleed of gas to maintain system stability

Suitable for wastewater and sewage applications.

B

Features:

– Unique lightweight compact design

– Directly acting stainless steel float

– Excellent outflow performance

– Sloped float chamber


– Tapped cowl for piped outflow

– Drainage valve as standard


– Available in stainless steel, prices on request


– Inlet: 2” BSP




– Coating: blue fusion bonded epoxy (WRAS listed)

Options:

– Isolating gate valve (recommended)

– Engineered surge alleviation protection mechanism

– Flanged inlet

– Rapid fill protection


PRICE £

CODEWEIGHT kg

CURVE

2” BSP PN16 A \ AQ/AV2510.5 815

PERFORMANCE DATAba

r

m3/h

1.5

1.4

1.3

1.2

1.1

1

1

0.9

0.8

0.7

0.6

0.5 0 100 200 300 400 500

0 100 200 300 400 500

A

A

AIR DISCHARGE DURING PIPE FILLING

AIR INTAKE DURING PIPE DRAINING


DN200 C \ AQ/AV20082 2678

DN150 C \ AQ/AV15078 2496

DN80/100 B \ AQ/AV8040 1232

161


BWASTEWATER AIR VALVE

Features:



– Directly acting float mechanism


– Drain valve as standard


– Large sloped float chamber

– Available in stainless steel, prices on request

– Tapped cowl available



– Flanges & drillings: BS EN1092-2 1987 table 9 (PN16)





Options:

– Isolating gate valve (recommended)

– Engineered surge alleviation protection mechanism


Double orifice air valve having three functions:




Suitable for wastewater & sewage applications.


PRICE £

CODEWEIGHT kg

CURVE

DN50 A \ AQ/AV5029 1115


PERFORMANCE DATA

bar

m3/h

1.5

1.4

1.3

1.2

1.1

1

1

0.9

0.8

0.7

0.6

0.5 0 1000 2000 3000 4000 5000 6000 7000 8000

0 1000 2000 3000 4000 5000 6000 7000 8000

A B

C

A B C


AIR INTAKE DURING PIPE DRAINING


162


Single small orifice air valve for efficient air release. Automatically releases air pockets accumulated at critical points of a pressurised pipelines, such as high points and changes in slope, avoiding unwanted head loss and reduction in flow through the system. Suitable for potable and filtered water applications.

B

Features:

– Stainless steel float

– Lightweight ductile iron construction

– Stainless steel fasteners

– WRAS approved non-metallic components

– Seat over compression protection


– Standard: BS EN 1074-4

– Inlet: 1” BSP (female threaded)

– Maximum working pressure: 16 bar (25/40 bar on request)

– Temperature range: -10°C to 60°C, insulate at 0°C

– Coating: fusion bonded epoxy (WRAS listed)

– Minimum working pressure: 0.1 bar

Options:

– Isolating valve

– Inlet flange

– 25 bar and 40 bar variants available

– Reinforced stainless steel float


PRICE £

CODEWEIGHT kg

CURVE

1” BSP PN16 A \ AQ/AV1F252.8 175

1” BSP PN40 B \ -2.8 240

PERFORMANCE DATA

bar

Q / l/sec

40

35

30

25

20

15

10

5

0 0 2 4 6 8 10

A – Ø1.7mm

B – Ø1.1mm

AIR RELEASE DURING WORKING CONDITIONS


CLEAN WATER AIR VALVE ONE FUNCTION

163


B



– Inlet: 1” BSP to DN300

– Maximum working pressure: 16 bar (25 & 40 bar on request)



– Hydrostatic pressure tests: Seat – 1.1 x PN Sody – 1.5 x PN



Features:

– Directly acting solid cylindrical float

– Lightweight compact design

– Excellent flow capacity

– Drain valve


Options:

– Isolating valve

– Tapped cowl

– Insect mesh

– Surge alleviation mechanism

– Discharge only kit


Innovative single chamber lightweight single large orifice air valve having two functions:



Suitable for potable and filtered water applications.

DN80 B \ AQ/AV2F8012.4 318

DN50 A \ AQ/AV2F508.6 227

2” BSP -6.2 220


PRICE £

CODEWEIGHT kg

CURVE

1” BSP AQ/AV2F253.2 145

DN250 F \ AQ/AV2F250121 P.O.A.

DN200 E \ AQ/AV2F20095 989

DN150 D \ AQ/AV2F15056 660

DN100 C \ AQ/AV2F10020 433

DN300 G \ AQ/AV2F300127 P.O.A.

0 5000 10000 15000 20000 25000 30000

PERFORMANCE DATA

bar

m3/h

1.5

1.4

1.3

1.2

1.1

1

1

0.9

0.8

0.7

0.6

0.5

0 5000 10000 15000 20000 25000 30000


AIR ENTRANCE DURING PIPE DRAINING

A B C D E F G

A B C D E F G



CLEAN WATER AIR VALVE TWO FUNCTIONS

DN80 B \ AQ/AV3F8012 433

DN50 A \ AQ/AV3F509 315

2” BSP -6 285


PRICE £

CODEWEIGHT kg

CURVE

1” BSP AQ/AV3F253 226

DN200 E \ AQ/AV3F20058 1220

DN150 D \ AQ/AV3F15056 690

DN100 C \ AQ/AV3F10020 500

164


B

Features:

– Directly acting solid cylindrical floats

– Lightweight compact single chamber design

– Patented small orifice configuration


– Drain valve





– Maximum working pressure: 16 bar (25 & 40 bar on request)



– Hydrostatic pressure tests: Seat – 1.1 x PN Body – 1.5 x PN


Options:

– Tapped cowl for submerged duty

– Discharge (exit only) kit

– Air entrance (ingress only) kit

– Anti shock system to prevent water hammer

– Isolation valve

Innovative single chamber lightweight double orifice air valve having three functions:



– Controlled bleed of gas to maintain stability

Suitable for potable and filtered water applications.

PERFORMANCE DATA

bar

m3/h

1.5

1.4

1.3

1.2

1.1

1.0

1.0

0.9

0.8

0.7

0.6

0.5

0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

AIR DISCHARGE DURING

PIPE FILLING

AIR ENTRANCE DURING

PIPE DRAININGA C D EB

A C D EB



CLEAN WATER AIR VALVE THREE FUNCTIONS

DN80 B \ AQ/AV3F80AS13 P.O.A.

DN200 E \ AQ/AV3F200AS60 P.O.A.

DN150 D \ AQ/AV3F150AS60 P.O.A.

DN100 C \ AQ/AV3F100AS22 P.O.A.


DN50 A \

-

AQ/AV3F50AS9 P.O.A.


PRICE £

CODEWEIGHT kg

CURVE

1” BSP AQ/AV3F25AS4 520

165


B


– Standard: BS EN 1074-4:2000


– Flanges and drillings: BS EN 1092-2:1987 table 9 (PN16)

– Alternatives: BS EN 1092-2:1987 table 10 (PN25) BS EN 1092-2:1987 table 11 (PN40)

– Maximum working pressure: 16 bar (25 and 40 bar on request)



– Hydrostatic pressure tests: Seat – 1.1 x PN Body – 1.5 x PN


Features:

– Patented proven engineered design

– Metallic integral surge alleviation mechanism

– Directly-acting precision-machined solid floats

– Robust lightweight ductile iron body



– WRAS approved

Options:

– Tapped outlet cowl

– Higher pressure version (PN25, PN40 & PN64)

– Insect mesh

– Associated components (isolation valve and filter)

Saferise® is a double orifice air valve with integral engineered surge anticipation and alleviation mechanism. Designed to overcome potentially damaging effects of hydraulic surges associated with water boosting systems in high-rise buildings, vacuum prevention on pump failure and column separation. Saferise® allows the efficient intake of bulk air during the draining cycle while accurately controlling the discharge speed during the charging cycle.

PERFORMANCE DATA

bar

m3/h

1.0

0.9

0.8

0.7

0.6

0.5 0 1000 2000 3000 4000 5000 6000


A C D EB

CLEAN WATER AIR VALVE ANTI SLAM


PLASTIC COMBINATION AIR VALVE

Features:

– Lightweight single chamber design with internal float guides

– Aerodynamic full-bore body prevents premature closure at higher air velocity

– Dynamic sealing prevents leakage under low pressure conditions

– Variants include; exit only, entrance only and anti- shock mechanism

– BSP male thread inlet connection

– Compact,corrosion resistant and low maintenance

– DM174 approval for potable water use



– Inlet: 1” BSP to 2” BSP



– Temperature range: 60°C maximum, insulate at 0°C and below

Combination, three function, automatic air valve for the efficient management of air in potable, irrigation and treated water application.


– Ingress of gas to prevent vacuum as media leave system


0 50 1501000

16

14

12

10

8

6

4

2

Q (Nm3/h)

p (b

ar)

AB

AIR RELEASE DURING WORKING CONDITIONS PERFORMANCE DATA

PERFORMANCE DATA

bar

m3/h

1.5

1.4

1.3

1.2

1.1

1

1

0.9

0.8

0.7

0.6

0.5 0 100 200 300 400 500

0 100 200 300 400 500

A

B

BA



2” AQ/AV3F50P0.75 185


PRICE £

CODEWEIGHT kg

CURVE

1” AQ/AV3F25P0.3 95

B \

A \

B

166



B

Features:– Patented self cleaning piston– Proven engineered balance design– Robust ductile construction– Stainless steel internal components– WRAS listed materials– Tapped upstream and downstream bossesOptions:– Inline strainer– Isolation valve

PRESSURE REDUCING VALVE

Technical specification:– Range: DN50 – DN150– Adjustable downstream pressure: 11/2 – 6 bar, 5 – 12 bar or 12 – 24 bar– Maximum upstream pressure: 40 bar– Minimum dynamic differential pressure: 1 bar– Flanged: EN1092 table 9 (PN16)– Face to face: EN558 series 1– Maximum temperature: 70°C– Hydrostatic pressure tests: Seat – 1.1 x PN Body – 1.5 x PN– Coating: WRAS listed fusion bonded epoxy

An accurate and reliable directly-acting pressure reducing valve used to maintain a preset downstream pressure regardless of flow rate and upstream pressure fluctuations. Suitable for domestic, commercial and industrial applications involving potable water, oil or air.


PRICE £

CODEWEIGHT kg

DN: Nominal Diameter.Please note prices relate to 11/2-6 bar version. For other prices please speak to our Sales Team.

DN50 SPRING 1 1/2 – 6 BAR AQ/PRV50/612 825

AQ/PRV65/6DN65 SPRING 1 1/2 – 6 BAR 19 1100





EQUILIBRIUM BALL FLOAT VALVE



PRICE £

CODEWEIGHT kg

DN50 AQ/FV5021 880

AQ/FV65DN65 36 980

AQ/FV80DN80 33 1340

AQ/FV100DN100 41 1575

AQ/FV125DN125 49 1675

AQ/FV150DN150 79 2807

AQ/FV200DN200 118 3925

AQ/FV250DN250 138 6175

AQ/FV300DN300 250 8800

Technical specification:– Range: DN50 – DN300– Flanges and drillings: BS EN 1092-2:1987 table 9 (PN16)– Maximum working pressure: 16 bar– Hydrostatic pressure tests: Seat – 1.1 x PN (17.6 bar) Body – 1.5 x PN (24.0 bar)– Temperature range: -10°C to 70°C, insulate at 0°C and below– Coating: blue fusion bonded epoxy (>300µ and WRAS listed)

Features:– Unique lightweight ductile iron design– Balanced seat for optimal efficiency– Versatile T-ported flanged body– Stainless steel internals and float for corrosion resistance– Long float arm for accurate and reliable operation– Float arm can be off-set by 45° so to avoid obstacles– Durable fusion bonded epoxy coatingOptions:– Alternative internal materials– Alternative flange drillings– Anti-freezing device

Equilibrium ball float valve with multiple discharge ports used to automatically regulate and control the filling of tanks and reservoirs to a predetermined level. Suitable for clean and potable water duties.

B

167



B

B

BRASS GATE VALVEMetal seat wedge gate valve used for pipeline isolation. Suitable for non-aggressive, non-corrosive and non-abrasive media up to 100°C.

Materials:

– Body: Brass CW617n / CC754S

– Bonnet: Brass CW617N

– Wedge: Brass CW617N

– Hexagonal nut: Brass CW614N

– Stem: brass CW614N

– Bonnet washer: Fibre

– Stem seal: EPDM

Features:

– Threaded female BSP parallel

– Solid wedge design

– Non-rising stem

– 100% Full bore

– Screwed bonnet

– Handwheel operated

BRASS BALL VALVETwo piece ball valve with PTFE seat used for pipeline isolation. Suitable for many industrial and domestic applications up to 150°C.


PRICE £

CODEWEIGHT kg

1/2” BSP PN16 VI/156/144 8

VI/156/203/4” BSP PN16 4 11.50

VI/156/251” BSP PN16 5 15.50

VI/156/3211/4” BSP PN16 20 20.75

VI/156/4011/2” BSP PN16 29 27

VI/156/502” BSP PN16 59 40.50

VI/156/652 1/2” BSP PN16 109 69

VI/156/803” BSP PN16 135 96

VI/156/1004” BSP PN16 200 175


PRICE £

CODEWEIGHT kg

1/2” BSP PN40 VI/90-140.178 5.50

VI/90-203/4” BSP PN40 0.296 8

VI/90-251” BSP PN40 0.423 12.25

VI/90-3211/4” BSP PN30 0.664 19.25

VI/90-4011/2” BSP PN30 0.983 28.50

VI/90-502” BSP PN25 1.58 45

VI/90-652 1/2” BSP PN18 3.5 104

VI/90-803” BSP PN16 5.45 162

VI/90-1004” BSP PN14 8.775 265

Features:

– Threaded female BSP parallel

– Anti-blow out stem design

– Chrome plated brass ball

– ‘Bubble-tight’ seal

– 100% Full bore

– Durable PTFE seat

– Lever operated

Materials:

– Body: Nickel plated brass CW617N

– Ball: Chrome plated brass CW617N

– Stem: Chrome plated brass CW614N

– Seal: PTFE

– Washers: NBR

168



B

B

Features:

– Threaded BSP parallel

– Spring assisted

– Resilient seat

– Optional stainless steel strainer

– Suitable for both horizontal and vertical installation

BRASS SPRING CHECK VALVE

Materials:

- Body: Copper alloy CW617N

- Seat: NBR

- Seal assembly: Nylon 6

- Spring: Stainless steel AISI 302

Two piece spring return check valve used to prevent reverse flow. Suitable for many industrial and domestic applications up to 100°C.


PRICE £

CODEWEIGHT kg

1/2” BSP PN12 VI/103-120.137 4.75

VI/103-203/4” BSP PN12 0.21 6.50

VI/103-251” BSP PN12 0.28 8.50

VI/103-3211/4” BSP PN10 0.407 12.50

VI/103-4011/2” BSP PN10 0.608 18.75

VI/103-502” BSP PN10 0.845 25.50

VI/103-6521/2” BSP PN8 1.404 48

VI/103-803” BSP PN8 2.1 67

VI/103-1004” BSP PN8 2.5 117


PRICE £

CODEWEIGHT kg

1/2” BSP PN12 VI/108-140.096 4

VI/108-203/4” BSP PN12 0.141 5

VI/108-251” BSP PN12 0.205 6.25

VI/108-3211/4” BSP PN10 0.301 9.25

VI/1083-4011/2” BSP PN10 0.444 13.50

VI/108-502” BSP PN10 0.625 19

VI/108-6521/2” BSP PN8 1.1 36.50

VI/108-803” BSP PN8 1.65 50

VI/108-1004” BSP PN8 2.465 86

BRASS SPRING CHECK VALVE C/W STRAINERTwo piece spring check valve used to prevent reverse flow. Strainer fitted to minimize debris entering pipe system. Suitable for many industrial and domestic applications up to 100°C.

Features:

– Screwed female BSP parallel

– Spring assisted

– Resilient seat

– Stainless steel strainer


Materials:

– Body: Copper alloy CW617N

– Seat: NBR

– Seal assembly: Nylon 6

– Spring: Stainless steel AISI 302

– Strainer: Stainless steel AISI 304

169



BBRASS SWING CHECK VALVESwing check valve used to prevent reverse flow. Suitable for many industrial and domestic applications up to 100°C.

Materials:

– Body: Brass CW617N

– Inspection cover: Brass CW617N

– Disk: brass CW617N

– Washers: Fibre

Features:

– Screwed female BSP parallel

– Metal seat

– Screwed inspection cover

– Free hanging disc



PRICE £

CODEWEIGHT kg

1/2” BSP PN12 VI/130-140.171 6

VI/130-203/4” BSP PN12 0.272 8.50

VI/130-251” BSP PN12 0.416 12.50

VI/130-3211/4” BSP PN10 0.632 18.50

VI/130-4011/2” BSP PN10 0.804 24

VI/130-502” BSP PN10 1.124 33.50

VI/130-652 1/2” BSP PN8 2.02 69

VI/130-803” BSP PN8 2.87 95

VI/130-1004” BSP PN8 5.3 172

BEVEL GEARBOXReliable reduction bevel gearbox designed for long-life operation that can be either operated manually or motor driven. Prepared to suit non-rising multi-turn valves such as gate, globe or penstock valves.

Features:– Proven engineered design– Gears supported by tapered roller bearings– Removable pinion shaft– Grease filled for long-life– Range of gearing ratios– Robust ductile iron housing– Input prepared for actuation– Durable fusion bonded epoxy coating

Technical:– Maximum output torque: 3200nm– Input & output configuration: ISO5210– Ingress protection: IP67– Max. Temperature: 120°C– Coating: WRAS listed fusion bonded epoxyOptions:– Acceptance of rising spindle and stem protection tube– BS5163 tapered stem cap– Handwheel (lockable on request)– Electrical actuation– IP68 on request– Secondary reversing spur gearbox

B

GBF25 BGBR F25/F16103 10191:4


PRICE £

CODEWEIGHT kg

RATIO

GBF16 BGBR F16/F1452 14501:4

170




PRICE £

P.O.A.

P.O.A.

740

P.O.A.

P.O.A.

1075

P.O.A.

P.O.A.

P.O.A.

SGB1 F14/F10

SGB2 F16/F10

SGB2 F16/F14

SGB3 F25/F10

SGB3 F25/F14

SGB3 F25/F14

SGB4 F30/F14

SGB4 F30/F14

SGB1 F40/F14

SGB1 F40/F16 P.O.A.

BSPUR GEARBOXReliable reduction spur gearbox designed for long-life operation that can be either operated manually or motor driven. Prepared to suit non-rising multi-turn valves such as gate, globe or penstock valves.

Features:

– Proven engineered design

– Gears supported between bearing races

– Grease filled for long-life

– Range of gearing ratios

– Robust ductile iron housing

– Input prepared for actuation

– Durable fusion bonded epoxy coating

Technical:

– Maximum output torque: 7200nm

– Input & output configuration: ISO5210

– Ingress protection: IP67

– Max. Temperature: 120°C

– Coating: WRAS listed fusion bonded epoxy

Options:

– Acceptance of rising spindle and stem protection tube

– BS5163 tapered stem cap

– Handwheel (lockable on request)

– Electrical actuation

– IP68 on request

– Secondary reversing spur gearbox

WEIGHT kg

RATIO

221:4

321:8

321:4

861:16

861:8

861:4

1221:16

1201:8

2651:16

2601:8

REVERSING SPUR GEARBOXReliable reversing reduction spur gearbox designed for long-life operation that can be either operated manually or motor driven. Engineered to reverse the output direction regardless of the input direction. Prepared to suit non-rising multi-turn valves such as gate, globe or penstock valves.

Features:

– Proven engineered design

– Gears supported between bearings

– Grease filled for long-life

– Range of gearing ratios

– Robust ductile iron housing

- Input prepared for actuation

- Durable fusion bonded epoxy coating

Technical:

– Maximum output torque: 1900nm

– Input & output configuration: ISO5210

– Ingress protection: IP67

– Max. Temperature: 120°C

Options:

– BS5163 tapered stem cap

– Handwheel (lockable on request)

– Electrical actuation

– IP68 on request

AQ/GBRSF16 RGB F16/F1422 6301:4


PRICE £

CODEWEIGHT kg

RATIO

AQ/GBRSF14 RGB F14/F1411 4351:2

AQ/GBRSF25 RGB F25/F1450 10501:4

CODE

SGB1

SGB2

AQ/GBSF16

SGB3

SGB3

AQ/GBSF25

SGB4

SGB4

SGB5

SGB5

B

171



800mm

C/W F14 PAD - - - - - AQ/HEADSTOCKF14

12kg / £303

300 - 1000mm

(ONE PIECE) AQ/EXT1000 AQ/EXT1000-L VJ/TEE-KEYX1M VJ/TEE-KEYX1M-L - -

4kg / £49 7kg / £91 4.5kg / £51 6.5kg / £82

EXTENSION EXTENSION T-KEY T-KEY ADJUSTABLE FLOOR MOUNTED SPINDLE SPINDLE DN50 – DN300 DN350 – DN600 OUTREACH PEDESTAL DN50 – DN300 DN350 – DN600 SUPPORT BRACKET

BVALVE OPERATING EQUIPMENT

800mm

C/W F10 PAD - - - - - AQ/HEADSTOCK

12kg / £234

80 – 700mm - - - - AQ/OR80-700 - 3kg / £88

80 – 300mm - - - - AQ/OR80-300 - 2.5kg / £51

EXTRA FOR - - - - HANDWHEEL 10kg / £25 (UP TO) 10kg / £25

5001 - 6000mm

(TWO PIECE) AQ/EXT6000 AQ/EXT6000-L - - - -

17kg / £144 20kg / £182

4001 - 5000mm


14.5kg / £131 17.5kg / £171

3001 - 4000mm


12kg / £118 15kg / £161

2001 - 3000mm

(ONE PIECE) AQ/EXT3000 AQ/EXT3000-L - - - -

9kg / £72 12kg / £113

1001 - 2000mm

(ONE PIECE) AQ/EXT2000 AQ/EXT2000-L VJ/TEE-KEYX1.5M VJ/TEE-KEYX1.5M-L - -

6.5kg / £59 9.5kg / £101 7kg / £55 9kg / £93

UNIVERSAL

JOINTS AQ/UNIJOINT26 AQ/UNIJOINT26 - - - -

(PAIR)

& AQ/GAITER35 & AQ/GAITER35 1kg / £210 1kg / £210

172



www.ttpumps.com / T: +44 (0) 1630 647200

SECTION 10 CONTROL SYSTEMS

TYPE VOLTAGE WEIGHT kg


PRICE £

DIMENSIONS h x w x d mm


PRICE £

174

10 – CONTROLS

PUMPPAL / PUMPPAL PRO

CONTROLLER

PumpPal is a range of versatile units offering a wide variety of functions such as 1Ph motor control, dry running indication, protection or water detection to name but a few. The PumpPal incorporates mains healthy indication, the ability to be used for filling or emptying applications whilst controlling a 1Ph 230V motor directly up to 8 Amp FLC.

This unit is particularly suited to basements where under normal circumstances water should not be present. Level detection can be via our LevelPal, float switch or conductivity probes.

The T-T RainCycle® Controller range of panels offers a simple control solution within water harvesting applications. Designed for use with a 230V / 1Ph pump, these units provide storage tank level monitoring as standard with the use of floats to detect and indicate water available, top up required and no water conditions. For systems where harvested water requires topping up with mains water, we have a range of solutions including our additional Top-Up Box consisting of a small and compact enclosure. The T-T RainCycle® Level version is an ideal solution where applications require a more accurate level indication.

PumpPal

PumpPal / PumpPal Pro

PuddlePalLevelPal

Applications:– Single-phase pump control (up to 8 AMP) – Dry run sensor– Flood monitor– Flow sensor – Remote indication– Remote signalling– Residue pump operation– Server room water detection

Applications:– Fully compatible within T-T Pumping Station– Irrigation systems– Outdoor taps (non-potable water)– Utilities such as toilets, laundry & cleaning– Industrial processes– Can be used as a stand alone unit

Features:– Compact waterproof enclosure– PCB design– Status indicators for power on, pump running, water available / mains water top-up valve, water low & no water– Functional test buttons for pump & alarm– Additional LED level display via level transducer– 24VDC solenoid supply– Additional top-up box

Features:– PCB design – Run on timer for use with residue pumps– Adjustable sensitivity on conductivity circuit– Compact weatherproof enclosure, IP66 rating– Can control single phase motors up to 8 AMP FLC– High-level audible alarm C/W mute configurable for continuous or intermittent use (PUMPPAL PRO)

– LED indication for mains healthy and pump running / relay active– Dual voltage input 230V / 110V 1Ph– Levelpal supplied with 10m cable as standard, longer lengths available upon request– Volt free contacts available for remote monitoring– 2nd sensor e.g. high level on PumpPal Pro – “Test” button facility

*Please note, optional extras are not included in the price. See our RainCycle® literature or website for more information.

LEVEL TRANSDUCER

STANDARD* 230V/1Ph CAX/RCS180 x 145 x 75 299

180 x 145 x 75 310

180 x 145 x 75 335

180 x 145 x 75 345

230V/1Ph CAX/RCT

230V/1Ph CAX/RCL

230V/1Ph CAX/RCTL

240 x 190 x 90 20524VDC

- - P.O.A.

CAX/TOPUPBOX

-

TOP-UP*

LEVEL*

TOP-UP & LEVEL*

TOP-UP BOX N/A

N/A

FLOATS x 2

FLOATS x 2

FLOATS x 2

FLOATS x 2

TOP-UP BOX

TOP-UP BOX

TOP-UP BOX

TOP-UP BOX

LEVEL TRANSDUCER

LEVEL TRANSDUCER

LEVEL TRANSDUCER

LEVEL TRANSDUCER

X

X

X

X

X

X

X

X

TYPE OPTIONAL EXTRAS REQUIRED (X) VOLTAGE CODE DELIVERY STATUS

PUMPPAL 230V / 110V 1Ph 130 x 145 x 60 TTC/PPAL

230V / 110V 1Ph 130 x 145 x 60 TTC/PPALPRO

- 1.2 7350 x 70 x 110 TTC/LPAL

- - -

1.2 95

45

0.6 239

0.6 259

50 x 70 x 110 TTC/LPALST

CSW/BERS2.0-24V

PUMPPAL PRO

LEVELPAL

LEVELPAL STAINLESS STEEL

24V BEACON

B

C

RainCycle® Controller (Top-Up & level version shown)


Suitable for use with differential type float switches or pressure switches (FLO103 ideally suited). 400V versions require a neutral conductor in the supply.

FLC rating for each product is maximum.

VOLTAGETYPE SINGLE / DUAL

MAX / FLC (A)

DOL WEIGHT kg


PRICE £


S4.0T 9 YES 470400V/3Ph & N SINGLE 3275 x 195 x 165 A4/ES/1878

S1.5M 9 YES 455230V/1Ph SINGLE 275 x 195 x 165 A4/ES/18073.5

S3.0M 18 YES 495230V/1Ph SINGLE 280 x 290 x 165 A4/ES/18063.5

D1.5M 9 YES 680DUAL230V/1Ph A4/ES/18816.8316 x 396 x 165

D3.0M 18 YES 725DUAL230V/1Ph A4/ES/18057.3280 x 290 x 165

D4.0T 9 YES 705DUAL400V/3Ph & N A4/ES/18795.6367 x 273 x 165

STANDARD MOTOR STARTERS

175

Ideally suited for controlling pumps or motors via float switches, our standard motor starter range offers reliable, economic, automatic control with a host of user friendly features.Single and dual motor versions are available with the dual starter having Duty / Standby or Duty / Assist function with automatic duty pump rotation after each operating cycle.Features:– Door-interlocked isolator – Low-voltage control (24V) – Audio-visual high-level alarm with mute – Duty cycle changeover on dual panels – Motor overload and overheat protection connections– Additional beacon available

10 – CONTROLS

B

BEACON (XENON TYPE FOR MOTOR STARTER) - - 45-24VDC TTC/XENBEACON24VDC0.1-

ORDER BY 1PM FOR SAME DAY DISPATCH ON MODELS INDICATED WITH


FLC rating for each product is maximum.

*Complete with options 1,2,3 and GSM technology as standard. Optional upgrade available to Seer cloud-based telemetry / data logging.


PRICE £

CBX/OPT1-ALL 68

CBX/OPT2-ALL 57

CBX/OPT3-1901/18 26

CBX/OPT4-1901/18 63

OPTIONAL EXTRAS

OPTION 1 – WARNING BEACON FOR PUMP TRIP AND HIGH LEVEL (SUPPLIED LOOSE OR FITTED)

OPTION 2 – AUDIBLE WARNING ALARM, MUTE PUSH BUTTON & REMOTE TERMINALS

OPTION 3 – DOOR MOUNTED OVERLOAD RESET (PER PUMP)

OPTION 4 – AMMETER AND HOURS RUN METER (PER PUMP)

OPTION 5 – FUSED TELEMETRY SUPPLY (1PH OR 3PH) CBX/OPT5-ALL 26

VOLTAGE SINGLE / DUAL

MAX / FLC (A)

WEIGHT kg


PRICE £


DOL /ASD

12 569230V/1Ph DOLSINGLE 400 x 400 x 250 O/A A4/ES/191811.4

12 595400V/3Ph DOLSINGLE 400 x 400 x 250 O/A A4/ES/190111.2

12 780DOLDUAL230V/1Ph A4/ES/191919500 x 400 x 250 O/A

400V/3Ph 12 82518.5DUAL DOL A4/ES/1903500 x 400 x 250 O/A

400V/3Ph 18 87518.5DUAL DOL A4/ES/1904500 x 400 x 250 O/A

400V/3Ph 22 191523DUAL DOL A4/ES/1910*600 x 400 x 250 O/A

18 187522DUAL DOL230V/1Ph A4/ES/1911*600 x 400 x 250 O/A

32 735400V/3Ph DOLSINGLE 12500 x 400 x 250 O/A A4/ES/1902

18 730400V/3Ph ASDSINGLE A4/ES/190613500 x 400 x 250 O/A

32 860400V/3Ph ASDSINGLE A4/ES/190713500 x 400 x 250 O/A

400V/3Ph 32 109919DUAL DOL A4/ES/1905700 x 500 x 300 O/A

400V/3Ph 18 119921DUAL ASD A4/ES/1908700 x 500 x 300 O/A

400V/3Ph 32 148521DUAL ASD A4/ES/1909700 x 500 x 300 O/A

Our most popular and versatile range of Standard DOL / ASD control panels. The Libra range offers an extensive choice of single and dual motor control options suitable for 1Ph 230V and 3Ph 400V power supplies.Available in direct on line (DOL), or star-delta (ASD) starting for larger motors, with various optional extras enabling customisation to suit your requirements, including telemetry monitoring. All control panels are manufactured at T-T’s premises by a team of skilled wire-personnel, with each panel passing rigorous inspection and testing prior to despatch.– Panels suitable for indoor use only (see kiosks on page 186 for weatherproof enclosures)– Motor start capacitors may require additional control gear which will be an extra cost

B

ORDER BY 1PM FOR

SAME DAY DISPATCH

ON MODELS

INDICATED WITH

176

10 – CONTROLS


Available pre-built in certain panels, speak to our sales team for more

information.

OPTIONAL EXTRAS FOR YOUR LIBRA PANELOur Libra panels are fully customisable to your requirements by adding any of the below additional options to your panel.

Option choice: Same day dispatch is available on panels with no options or options 1 or 2 fitted. Panels with customised options selected will be offered on a next day basis. For further advice on availability contact our Sales Team.

NOTES FOR PANEL SELECTION- FLC (A) must be stated on order- The kW rating stated on each panel is maximum, we ask for FLC (A) upon receipt of order to ensure we select the correct overloads for your panel- Panels are suitable for indoor use only, see kiosks on page 186 for weatherproof enclosures- Motor starter capacitors may require additional control gear which will be an extra cost- Orders must be placed by 1pm for same day dispatch.

STANDARD ASD/DOL CONTROL PANELS

aa

aa

a

a

aaaaaaaa

aa

a

aa

a

a

B

STANDARD NO COST

OPTIONS1 2 3 4 5

FEATURES

DOOR-INTERLOCKED ISOLATOR

SEPARATELY FUSED ALARM CIRCUIT (WARNING ALARMS REMAIN OPERATIONAL SHOULD THE CONTROL FUSE PROTECTION BLOW)

RUN AND TRIP LED INDICATORS

ALTERNATIVE DUTY CYCLE FOR EVEN WEAR ON MOTORS

LOW VOLTAGE CONTROL CIRCUIT (24V)

FULLY COMPATIBLE WITH OUR TEXT-TEL, ALARM TEL, TELEMETRY AND MONITORING PRODUCTS

SELF REGULATING CONTROLLED ANTI-CONDENSATION HEATER

WARNING BEACON FOR PUMP TRIP OR HIGH LEVEL (SUPPLIED LOOSE OR FITTED)

MOTOR PROTECTION FUSE CARTRIDGES

REMOTE PUMP RESET VIA OUR TEXT-TEL RANGE OF TELEMETRY

DISTRIBUTION TERMINALS

AUDIBLE WARNING ALARM, MUTE PUSH BUTTON AND TERMINALS FOR REMOTE ALARM

CONTACTOR AND THERMAL OVERLOAD RELAY

HIGH LEVEL ALARM INDICATOR

SUITABLE FOR SINGLE ACTING AND DIFFERENTIAL LEVEL CONTROL/PRESSURE SWITCHES

DOOR MOUNTED OVERLOAD RESET (PER PUMP)

HAND-OFF AUTO SELECTOR SWITCHES (SPRING RETURN IN HAND TO PREVENT DRY RUNNING)

VOLT FREE MONITORING CONTACTS FOR PUMP TRIP AND HIGH LEVEL ALARM

DUTY STANDBY OR DUTY ASSIST OPERATION SELECTABLE ON DUAL VERSION

AMMETER AND HOURS RUN METER (PER PUMP)

FUSED TELEMETRY SUPPLY (1PH OR 3PH)

SUPPLYLEVEL

CONTROL

CONTROLPUMP SUMP

CLOUD BASED MONITORING*

SEER PORTAL Combine our best selling control panel with our state-of-the-art cloud based Seer monitoring units for a complete package.

In order to achieve the confirguration outlined in this diagram, either A4/ES/1910 or A4/ES/1911 panels must be selected with the additional optional upgade to Seer monitoring.

See page 184 for more information on our Seer monitoring products.

STANDARD ASD/DOL CONTROL PANELS

APPLICATIONS

- PUMP CONTROL

- MOTOR APPLICATIONS

- HEATING & VENTILATION

- BUILDING MANAGEMENT

- MACHINERY CONTROL

- BOOSTER SETS (WITH PRESSURE SWITCH)

COMPLETE WITH MARKET

LEADING CONTROL GEAR


10 – CONTROLS

FLOAT SWITCHES

COUNTERWEIGHTS

Float Switches are economic and efficient liquid level sensors, simple to install and designed for trouble-free operation over a long life.

– The FLO101 is ATEX / IECEX approved for use in zone related areas

– The FLO102 is for general purpose use

– The FLO106 is for use in diesel oil

– The FLO107 consists of WRAS approved materials for clean / potable water application

Offering an optional stabilising weight that can be fixed at any point on the cable, a counterweight controls the differential switching point of the float. Dependent on your application and the specific requirements of operation, we can supply the appropriate counterweight.

Applications:– Level control & regulation in a tank well or sump– Level indication– Pump, motor & actuator switching systems– Level warning by initiation of high or low level alarms

Features:– Simple maintenance– Lightweight– Heavy duty construction– Change over switch

COUNTERWEIGHT 1 60 x 50 x 50 0.25 LT/FLOCW-1 4.50





TYPE WEIGHT kg

PRICE £

CODE DELIVERYSTATUS


FLOCW-1 FLOCW-2 FLOCW-3 FLOCW-4 FLOCW-5

a a a a r

a a a a r

a a a a r

r r r r a

COUNTERWEIGHTCOUNTERWEIGHT COMPATIBILITY

CHART

FLOA

T TY

PE

FLO 102

FLO 103

FLO 106

FLO 107

B

B

TYPE WEIGHT kg


PRICE £

PACKING DIMENSIONS h x w x d mm

ATEX FLO101 FLOAT SWITCH 10m CABLE ATEX / IECEX




GENERAL FLO102 FLOAT SWITCH 10m CABLE



FUEL FLO106 FLOAT SWITCH 10m CABLE




3.00 ± 5% 106

3.65 ± 5% 131

1.10 ± 5% 69

1.65 ± 5% 89

2.60 ± 5% 115

3.05 ± 5% 141

1.45 ± 5% 73


POTABLE FLO107 FLOAT SWITCH 10m CABLE WRAS

300 x 300 x 100 LT/FLO101-10M

300 x 300 x 100 LT/FLO101-20M

3.05 ± 5% 123300 x 300 x 200 LT/FLO101-30M

LT/FLO101-40M

LT/FLO102-10M

LT/FLO102-20M

LT/FLO102-30M

LT/FLO102-40M

LT/FLO106-10M

LT/FLO106-20M

LT/FLO106-30M

LT/FLO106-40M

LT/FLO107-10M

4.5 ± 5% 144

1.25 ± 5% 66

2.00 ± 5% 86

1.25 ± 5% 71

2.05 ± 5% 92

300 x 300 x 200

300 x 300 x 100

300 x 300 x 100

300 x 300 x 200

300 x 300 x 200

300 x 300 x 100

300 x 300 x 100

300 x 300 x 200

300 x 300 x 200

300 x 300 x 100



2.25 ± 5% 113

3.20 ± 5% 154

4.10 ± 5% 187POTABLE FLO107 FLOAT SWITCH 40m CABLE WRAS

LT/FLO107-20M

LT/FLO107-30M

LT/FLO107-40M

300 x 300 x 100

300 x 300 x 200

300 x 300 x 200



10 – CONTROLS

For general purpose use

FLO103 is our economy option float switch. Constructed from a polypropylene housing moulded to a 3 core synthetic rubber cable and contains an internal microswitch and rolling ball operator.

FLOAT SWITCH – ECONOMY OPTION ECONOMY FLO103 Differential Float Switch

Applications:– Level control & regulation in a tank well or sump– Level indication– Pump, motor & actuator switching systems– Level warning by initiation of high or low-level alarms

Features:– Simple maintenance– Lightweight– Heavy duty construction– Change over switch

PUMP TYPE WEIGHT kg


PRICE £


ECONOMY FLO103 FLOAT SWITCH 10m CABLE 300 x 300 x 100 LT/FLO103-10M

300 x 300 x 100 LT/FLO103-20M

3.80 ± 5% 72300 x 300 x 200 LT/FLO103-30M

4.90 ± 5% 88

1.50 ± 5% 39

2.80 ± 5% 55

300 x 300 x 200 LT/FLO103-40M

ECONOMY FLO103 FLOAT SWITCH 20m CABLE



5.25 ± 5% 108300 x 300 x 200 LT/FLO103-50MECONOMY FLO103 FLOAT SWITCH 50m CABLE

B

TYPE DIMENSIONS m

PRODUCT CODE

READY LEVEL x2 TTC/READYLEVEL2M

TTC/READYLEVEL5M

TTC/READYLEVEL8M

READY LEVEL x5

READY LEVEL x8

2

5

8

WEIGHT kg

2.2

2.6

3

DELIVERY STATUS

PRICE £

75

105

135

B

The easy to set up and reliable device, T-T Smart 10 is a pressure controller for domestic and industrial use. Designed with usability in mind, this device can be used for pump control, pressure regulation and booster systems.

Ready level is a reliable method of fixing level control floats in a pump chamber or sump to avoid tampering or alteration of levels once set on commissioning.

The Ready Level sets can be purchased as a set of parts, comprising of stainless steel chain, D shackles, heavy-duty powdered coated weight, galvanised upper bracket D hook and stainless steel karabiner, or with additional float switches as a complete prefabricated assembly (if level settings are supplied to us at order stage).

Available in 2m, 5m and 8m options.

Features:– Compact, lightweight design – only 0.5kg– Built for reliability– Digital pressure switch, which can completely replace the traditional pressure switch.– Digital pressure switch offers high accuracy and resolution– Dry running protection– Delayed shutdown function– Pressure setting range is adjustable from 0-10 bar SMART 10

UPPER D BRACKET AND KARABINER READY LEVEL WEIGHT

MODEL CODE DELIVERY STATUS

PRICE £

MAX PRESSURE bar

SMART 10 PRESSURE CONTROLLER 10 89PHS/SMART10

16 112PHS/SMART16

25 125PHS/SMART25



SMART 10 / SMART 16 / SMART 25

READY LEVEL

A

Please note: Float switches not included.


10 – CONTROLS

The Press 10, 20 and 30 are electronic pressure switches with built-in dry running protection. They have been designed to be fitted to surface mounted pumps or inline from submersible well pumps for boosting water supply and low pressure main. The unit is equipped with a check valve to prevent the pipeline from losing pressure. No taps can be installed between the pump and the Press unit.

Features:

– Up to 10 bar


– Built-in non-return valve

– 230V single phase

– Designed for surface mounted and submersible pumps

Vasco is a purpose built range of variable speed drives, designed to control and protect pumping systems based on changing the motor frequency and pump speed. Vasco units are extremely compact, can be connected to any pump on the market and will control the operation of the pump to maintain a constantly desired pump performance (e.g. pressure, flow, temperature etc.)

The easy to configure settings allow the Vasco to determine the most effective duty point for the pumps and system. Body construction is entirely aluminium, making the units solid, lightweight and easily cooled. Protected to IP55, the Vasco units can be installed in virtually any location including humid and dusty environments.

INLET / OUTLET mm

MAX amp

WEIGHT kg

PRICE £


TEMP °C

MIN – MAX PRESSURE

PUMP START PRESSURE

TYPE

PRESS 10 / 20 / 30

VASCO

TT PRESS 20 1” x 1” 8 60

2.3 bar – 1.0 - 2.3 bar 1.1 PW/PRESS20 90

230V 25mm x 25mm 10 bar

TT PRESS 30 11/4” x 11/4” 8 60

3.0 bar – 1.0 - 3.0 bar 2.2 PW/PRESS30 120

230V 32mm x 32mm 10 bar

TT PRESS 10 1” x 1” 8 60

1.5 bar – 1.0 - 1.5 bar 1.1 PW/PRESS10 90

230V 25mm x 25mm 10 bar

Features:– Energy and cost saving– Simple to install– Increased pump life– Greater reliability– Motor protection and monitoring such as overload and dry running. – Soft start, soft stop function– Improved pump and system efficiency– Motor mounting and wall mounting kits available

VOLTAGE INPUT

VOLTAGE OUTPUT

RATING amps

PRICE £


TYPICAL POWER P2 (kW)

TYPE

VASCO 209 1Ph 1 x 230

VASCO 214 1Ph 1 x 230

1 x 230 9 1.1 PNA/V209 640

PNA/V214 915 1 x 230 9 1.1

3 x 230 7 1.5

3 x 230 11 3.0

VASCO 409 3PH 3 x 400 3 x 400 9 4 PNA/V409 1615

VASCO 406 3PH 3 x 400 3 x 400 6 2.2 PNA/V406 1180

VASCO 414 3PH 3 x 400 3 x 400 14 5.5 PNA/V414 2255

VASCO 418 3PH 3 x 400 3 x 400 18 7.5 PNA/V418 2625

VASCO 425 3PH 3 x 400 3 x 400 25 11 PNA/V425 2755

VASCO 430 3PH 3 x 400 3 x 400 30 15 PNA/V430 3415

VASCO 438 3PH 3 x 400 3 x 400 38 18.5 PNA/V438 4455

VASCO 448 3PH 3 x 400 3 x 400 48 22 PNA/V448 5150

VASCO 465 3PH 3 x 400 3 x 400 65 30 PNA/V465 5945



MOTOR MOUNT KIT 438/448/465 N/A N/A N/A N/A PNA/MOTORKIT3 375



WALL MOUNT KIT 414/418/425 N/A N/A N/A N/A PNA/WALLKIT3 66

0-16BAR PRESS.SENSOR 4-20MA N/A N/A N/A N/A PNA/PRESS.SENSOR 95

A

B



10 – CONTROLS

10 – CONTROLS


DID YOU KNOW? WE MANUFACTURE CUSTOMISED CONTROL PANELS

T-T Controls are specialists in designing, manufacturing and installing control systems for a wide selection of applications, varying in size and complexity.

We pride ourselves on our reputation for high standards, quality and client satisfaction.

FROM CONCEPT TO DESIGN, WE MANAGE THE FULL PROJECT

WHAT WE OFFER:

- In-house sales and design team equipped with the latest technology

- Skilled and qualified personnel and installation teams

- Rigorous inspection and testing to ISO9001, meeting current standards

- Complementry range of ancillary products such as telemetry

Particularly suitable for use as a high or low level warning alarm, the Alert and Alert Pro monitor the status of a volt free contact such as a float, pressure switch, intruder contact etc, and provides visual and audible warning indication.

Offering peace of mind monitoring of remote equipment, the Alarm-Tel has the ability to monitor and report changes on three alarm conditions, including mains failure using standard PSTN phone line.

Upon detection of a fault the unit will telephone up 3 different recipients with a user recorded message indicating which alarm condition has occurred. Battery back-up within the unit enables operation even under mains fail conditions.

ALERT / ALERT PRO

ALARM-TEL

Applications:

– High / low level alarm

– Intruder alarm

– High / low pressure

– High / low temperature alarm

Applications:

– Pumping stations

– Booster pump monitoring

– High / low level alarm

– Loss of prime of pump

– No flow warning

– Over temperature alarm

– Intruder alarm

Features:

– Weatherproof polycarbonate IP66 enclosure

– Power on indicator

– Test function

– Audible alarm complete with mute push button

– LED flashing beacon available to order seperately

– Voltfree (changeover) alarm contact (Alert Pro only)

Features:

– Test button provided to simulate an alarm condition

– PVC enclosure

– Fascia mounted LED’s

– Battery back-up for essential warning even on power loss (approx. 24 hours)

– Full recharge time approx. 16 hours

– BABT approved S/1100/3/P/502920

– User friendly speech recorder for message playback

Level control

ALERT / ALERT PRO

Alarm signal sound

High level

Light

SUPPLY

ALARM-TEL

Telephone

SUPPLY

ALARM-TEL

Level control

High level



PRICE £


ALERT (MAINS POWERED) 230V 151100 x 100 x 60 CAX/ALERT-MAINS

230V 215

230V 165

230V 229

12V DC 52

100 x 100 x 60 CAX/ALERTBATTERY

0.32100 x 100 x 60 CAX/ALERTPROMAIN

1.00

0.3

0.32

1.00

100 x 100 x 60

-

CAX/ALERTPRO-BATT

CAX/ALERTBEACON

ALERT (MAINS WITH BATTERY BACK UP)

ALERT PRO (MAINS POWERED)

ALERT PRO (MAINS WITH BATTERY BACK UP)

BEACON (LED TYPE FOR ALERT)



PRICE £


ALARM-TEL 230V/1Ph 280 x 190 x 131 735A4/E/2330

400V/3Ph 380 x 280 x 131 869A4/E/2920

– -- 235CPR/198-0452/239-731

– -

2.9

5

- 34CPR/K422+K2160

ALARM-TEL

LIGHTNING ARRESTOR

BT SOCKET

B

B

ALERT



10 – CONTROLS

The Text-Tel series offers a revolutionary range of monitoring devices all offering peace of mind, reporting any failures or condition changes on remote equipment, equivalent to having an engineer observing on site. All models report any changes via SMS text to either mobile phones or text enabled land lines and have 24 hour battery back-up. Two way communication is employed, enabling the plant to be remotely reset via text message when used with a compatible control panel.

Text-Tel Micro – Din rail housed unit making it ideally suited for retro fitting into existing control systems as well as new builds. LCD and LED status inputs provide interaction whilst programming, the unit monitors power failure plus 4 other user defined conditions.

Text-Tel Junior – Having LCD and LED status inputs as well as monitoring 4 defined conditions, the Text-Tel Junior is a stand alone weather-proof version, IP66 requiring a 230V 1Ph power supply.

Text-Tel Enviro – Operated from a DC power source, therefore, particularly suitable for use with PV energy sources, wind turbines etc. Offering supply healthy indication and monitoring a single alarm condition such as high / low level status, the unit is ideally suited to reservoir monitoring, borehole level, etc.

Applications:Monitoring of:– Pumping Stations– Water supply booster systems– Remote hired plant– Intruder alarms – Marine equipment– Flood preventionSuitable for any location with mobile phone coverage.

Features:– Easy to install– Simple to operate– Low running costs – Allows two-way communication from your mobile phone– No delays occurred in waiting for a landline to be installed – No additional charges associated with landline use and rental– Ability to reset remotely by phone when used with a compatible control panel– Networks available (PAYG or contract): EE or O2It is vital to have reception, please check favourable network before purchase.

TEXT-TEL JUNIOR / ENVIRO

Please speak to our Sales Team about our range of High Gain Aerials. Please note: Units use 2G networks and carrier frequencies for optimum coverage 3G and 4G networks are not supported due to poor or no coverage in certain geographical locations.

TEXT-TEL

WALL /

ENVIRO YES 1 5 YES YES 24VDC YES FREE 160 x 190 x135 1.23 A4/ES/1882 920

MOUNTING

TEXT-TEL YES 4 5 YES YES

24VAC/ YES DIN RAIL 100 x 105 x 60 0.8 A4/ES/1668 825

MICRO DC

TEXT-TEL

WALL /

JUNIOR YES 4 5 YES YES 230V/1Ph YES FREE 160 x 190 x 135 1.23 A4/ES/1617 975

MOUNTING

MODEL SUPPLY MONITORING

ADDITIONAL INPUT

SIGNALS

ADJUSTABLE INPUT

DELAY*

REMOTE RESET

(VIA TEXT)

VOLTAGE MOUNTING WEIGHT kg

PRICE £


MONTHLY TEXT / CALL TO KEEP

SIM ACTIVE


OUTPUT NO. TEL NO.

TYPICAL TEXT-TEL OPERATION

Mobile phone

network

Mobile phone

SMS Message

TEXT-TEL

Power

Overload trip

Reset.

No.5 Pump House.Pump 1 tripped.

SMS Message

Control panel

Pump 1 Pump 2

Other potential monitoring conditions:– High level liquid– Low pressure / high pressure– Intruder alert – Engineer on site– Pump failure– No flow

TEXT-TEL SERIES B

*First message only

10 – CONTROLS


SEER MONITORING SYSTEMS B

Dictionary meaningSeer: NounA prophesier with insight who sees visions of the future.Seer is the most advanced monitoring system on the market that allows T-T to monitor pumping stations and plant 24/7 with live status and alarm activation but most importantly, observation of the whole system with history that allows potential issues to be identified early.The Seer has the capability to interrogate and reset remotely. The system uses the ARGOS cloud network via machine to machine data collection offering superior connectivity and ensuring security. Information is received from plant and systems on real time basis with data refresh up to every 10 seconds. Variables are then stored and visually represented for example, pump running currents, incoming voltages, and wet well levels, giving a ‘snap shot’ of the whole system remotely.Data is continually available and is easily viewed and retrieved, allowing comparison over time to predict failures and monitor optional performance trends.Alerts via SMS and email are configurable for all conditions monitored, with severity levels fully customisable, from warning minor, major, to critical. The alerts can then be distributed based on severity, to fully selectable recipients with options for working, non-working and weekend rota coverage via daily and weekly calendar options.

SEER MONITORING SYSTEMS

The Seer device has the ability to monitor and report on various attributes, which can all be accessed via our Seer monitoring portal. The initial system overview gives you a snap-shot view of status of the pumping stations, displaying a pictorial view of the pump station in real-time, indicating wet well level, pump operational status, signal strength and network of the comms, and internal temperature.Features:– Real time reporting, offering ability to remotely diagnose faults– Visually represented data and alarm screens– Historical data held for plant comparison and analysis– Fully configurable alerts via SMS and email– Download data scheduling options– Alarms which replicates the panel indicators located on the fascia

– Alarm lists all alarms logged and resultant returning to normal state, occurred– Account management allowing reports to be generated on any parameter logged and allows these to be downloaded/exported– Hours run with % duty and operational times– Historical data allowing any parameter from the available lists to be recalled and plotted as required over days, weeks, months or years– Profiles which can be set for varying roles, such as Administrator, Managers, Operatives and Client with permissions to view and amend data– Voltage monitoring mapping the voltage of each phases, and displays as a bar graph– Notes allowing the user to populate this with any information, such as site visit details, ultrasonic level parameters etc. all stored in one convenient location.

– Notifications can be set in line with normal business hours & shift patterns for operatives, with options for alerts by text or email as required, dependant upon criticality of the alarm– Overview giving all points/ values logged as per user defined conditions– Info contains the System ID, SIM No and allows any PDF’s to uploaded pictures from site, schematic wiring diagrams etc

Benefits:– Reduced maintenance costs due to less unnecessary site visits– Pro-active maintenance– Real-time monitoring by a skilled pump engineer– Secure hosting of cloud based technology– Historical data analysis and performance trending– Early intervention to prevent detrimental failures– Remote reset functionality with on-site engineer safety feature

Please note: Not all features available on Seer Micro and Junior models.



10 – CONTROLS

B

Seer Advanced Signals*:– Power supply– High level– Pump failure: pump no.1 pump no.2– Voltage monitoring– Pump current– Pump operating

– Pump underload– Pump seal leak– Wet well level– Remote control– Trip reset– Pump start– Remote control active

*Not all features available on all units, as this is dependent upon existing control system variables, and Seer model chosen.Multiple digital and analogue variables are also available for customised systems. Speak to T-T Controls for more information.Note: Service Engineers deployed when live service agreement is in place with credit account facilities.

SEER UNITS

TYPE WEIGHT kg

PRODUCT CODE DELIVERY STATUS

PRICE £

DIMENSIONS w x h x d mm

VOLTAGE

SEER MICRO 135 x 110 x 80TTC/SEERMICRO 24 VAC

280 x 280 x 180TTC/SEERJUNIOR 230V

5.1 2790280 x 280 x 180TTC/SEERADVANCED 400V

0.5 1150

3.5 2015SEER JUNIOR

SEER ADVANCED

Subscription for first 12 months included in unit pricing above. Annual renewal costs of £120 (based on 250,000 log points) required to maintain ARGOS cloud subscription, after initial 12 months.

MACHINE 2 MACHINE DATA SIM

N/A

N/A

N/A

295

455

495

N/A

N/A

N/A

TTC/M2MUK

TTC/M2MEU+W

TTC/M2MUAE

N/A

N/A

N/A

UK

EU & REST OF THE WORLD

UAE

Please note: Above are fixed 2 year contracts. SIMS not sold separately.

MOBILE PHONE

ARGOS CLOUD

SEER PORTAL

T-T MONITORING

SERVICE ENGINEERS DEPLOYED

SEER MONITORING

UNIT

Machine 2 machine data SIM required for Seer unit operation. SIMs available for UK, EU & Rest of the World and UAE.Note: UAE does not support SMS text messaging.We also offer the above product via our monitoring service, giving complete analysis of a systems operational performance and service requirements 24 hours a day, 365 days a year.Speak to us for more information and options available.

10 – CONTROLS


KIOSKS & ENCLOSURES

INSULATING WALL-MOUNTING ENCLOSUREPLAIN DOOR AND GLAZED DOOR VERSIONS

Accommodation for your control panel can be provided from an extensive range of kiosks and other enclosures, in a variety of materials including steel with protective coatings, stainless steel, polycarbonate and GRP for outdoor and indoor applications and harsh environments.

They can provide space as required for electricity meters and special items such as telemetry units, generator connections, and distribution equipment.Features:– Robust construction– Outdoor or indoor use– Bespoke design and manufacture available– Weatherproof– Plywood blackboards for equipment mounting– Can be supplied C/W heating and lighting requirements– Generator catflap can be requested optionally

Monobloc wall-mounting enclosure made from polyester reinforced with fibreglass, moulded by hot compression giving degree of protection IP66. The enclosures are impact resistance to IK10 for the plain doors and IK08 for the glazed doors of the polyester versions. The enclosures have UL certification 4x and 13 for the polyester wall-mounting enclosures and complies with RoHS and REACH Directives.

Features:– High resistance to corrosion in harsh environments, maintaining its mechanical properties and insulation– Door easily reversible by turning it over– Lightness– Polyamide hinge pin, easily removable and captive– Locking device outside the sealed area, guaranteeing the tightness of IP66 over time– Door opening angle at 180°– Supplied with internal backplate for equipment mounting, and wall fixing brackets

Applications:– Control equipment– Pump sets– Compressors– Telemetry outstations– Computer terminals– Lighting system

TYPE CODE DELIVERY STATUS

PRICE £


GRP 1250 x 750 x 400 CUU/1250X750GRP

ARRANGEMENT

SINGLE DOOR 640

DOUBLE DOOR 1240

DOUBLE DOOR 2085

SINGLE DOOR 555

DOUBLE DOOR 845

DOUBLE DOOR P.O.A.

DOUBLE DOOR P.O.A.

1250 x 1330 x400 CUU/1250X1250GRP

1750 x 2000 x 500 CUU/1750X2000GRP

1250 x 750 x 400

1250 x 1250 x 400

1500 x 2000 x 500

2000 x 2000 x 500

CUU/1250X750MS

CUU/1250X1250MS

CUU/1500X2000MS

CUU/2000X2000MS

GRP

GRP

MILD STEEL

MILD STEEL

MILD STEEL

MILD STEEL

C

WALL MOUNTING ENCLOSURE

KIOSKS

TYPE CODE DELIVERY STATUS

PRICE £


747 x 536 x 300 TTC / WMTG1GGLAZEDGLAZED 445

GLAZED 575

GLAZED 975

PLAIN 355

PLAIN 465

PLAIN 795

847 x 636 x 300 TTC / WMTG2GLAZED

1056 x 852 x 350 TTC/ WMTG3GLAZED

747 x 536 x 300

847 x 636 x 300

1056 x 852 x 350

TTC /WMTG1PLAIN

TTC/ WMTG2PLAIN

TTC /WMTG3PLAIN



10 – CONTROLS

NOTES


www.ttpumps.com / T: +44 (0) 1630 647200

SECTION 11 PUMPING STATIONS

Loopak is a macerator pump designed to automatically grind and discharge: sewage, toilet paper, greasy water, acid and water (up to 100°C), originating from either a bathroom or a kitchen. There are three models of the Loopak:

THE DOMESTIC Fitted with a 600 watt motor, suitable for all domestic applications.

THE PROFESSIONAL Equipped with a 1000 watt motor and is designed for the more demanding applications found in offices, hotels, restaurants, pubs and clubs.

THE PROFESSIONAL PLUS Fitted with a 600W motor and equipped with a heavy-duty cutting system and designed for the most demanding conditions.Features:– Macerator pump – Extremely versatile – Can be fitted to any European standard w.c.bowl with horizontal discharge – Utilises small 32mm or 40mm discharge pipe – Very easy maintenance; no mess– Motor unit can be serviced or replaced without disturbing toilet and waste connections (only on domestic and professional)

CURVEPRODUCT CODE

CABLE LENGTH

m

WEIGHT kg

FREE PASSAGE

mm


T-T UTILITY BOX 1 PZN/UTILITYBOX-1 15 540101.3 0.13A \ 1.5T-T UTILITY BOX 2 PZN/UTILITYBOX-2 16 600103.7 0.43B \ 1.5T-T UTILITY BOX 3 PZN/UTILITYBOX-3 17 6351.5103.7 0.43C \

PRICE £

190

11 – PUMPING STATIONS

T-T UTILITY BOXThe T-T Utility Box is a high-quality polypropylene tank intended for collecting water exclusively from domestic drains, including washing machines, showers and sinks. Neatly constructed and with a small footprint, the Utility Box is a versatile and easy to install.Features:

– Plug and play installation– Polypropylene container with 10l usable volume– Internal integral level control– Audible alarm in case of critical high water level– Free contact for an external alarm of washing machine stop button– Pump is fixed to the container lid for ease of maintenance– No cable gland on the container– Separate connection for washing machine– Fitted with one shower inlet (only 80mm off the floor)– Operating temperature 40°C (short period: up to 90°C)– Pressure outlet 11/4” with integrated check valve– Ventilation by integrated active carbon filter

PERFORMANCE DATA

HEA

D / m

Q / m3/h

14

12

10

8

6

4

2

0 0 5 10 15

A B C

B

OUTPUT

amp kW

WEIGHT kg

PRICE £


PRODUCT CODE

111211

LOOPAK DOMESTIC 800LOOPAK PROFESSIONAL 900

LOOPAK PROFESSIONAL PLUS

LP/V-S008LP/V-S007LP/V-009 950

LOOPAK B

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

10

9

8

7

6

5

4

3

2

1

0 0 50 100 150 200 250 300 350

15

160

290

30

210

320

50

240

100

265

LOOPAK DOMESTIC &

PROFESSIONAL

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

12

10

8

6

4

2

0 0 2 4 6 8

LOOPAK PROFESSIONAL PLUS

OUTPUT

3 0.64 1.0

2.5 0.6

amp kW

PROFESSIONAL PLUS MACERATOR


BLUE BOX 909 x Ø 110mm 1 x Ø 75mm

390190 9

BLUE BOX 150 10 x Ø75 or Ø110 4501150 11

20 x Ø75 or Ø110BLUE BOX 250 FROM 5601250 15

20 x Ø75 or Ø110BLUE BOX 400 FROM 7502400 31

NUMBER OF PUMPS

INTAKES WEIGHT kg

PRICE £

DISCHARGEMODEL DELIVERY STATUS

CAPACITY l

BLUE BOX 609 x Ø 110mm 1 x Ø 75mm

360160 8

BLUE BOX SUPPLIED WITH DISCHARGE PIPEWORK TO

SUIT PUMP SELECTION


BLUE BOXThe Blue Box range of high-quality polyethylene tanks are extremely versatile and easy to install. They are suitable for collecting clear, rain and wastewater from washing machines, sinks and WCs in systems installed at a lower level than the sewer, in locations such as garages or basements. The entire range uses Blue or Blue Pro series pumps, and are styled to match them.

The 60, 90, 150 and 250 models, suitable for domestic and small residential installations, are equipped to house one electric pump. The Blue Box 400 model, intended for civil plants, can be equipped with two electric pumps for complete reliability.

Features:

– 60, 90, 150 And 250 models fitted to take one pump; up to two pumps can be installed in 400 model

– Direct installation possible for all models; coupler can be used for 250 and 400 models

– Walk over cover

– Gasket between tank and cover

– Simplified intake, discharge and breather pipe installation with watertight gasket

– Integral lifting handles

– Emergency drainage fitting located low down in the unit

– Patented watertight cable gland allowing easy pump removal

– Side fins provide an excellent grip for in-floor installation

– Drainage or sewage applications – dependant on pump selection

– Includes standard pipework, 60, 90 and 150 has fixed pipework. Alternative pipework options available for 250 and 400 options

NUMBER OF PUMPS

WEIGHT kg

PRICE £

RECOMMENDED PUMPSMODEL DELIVERY STATUS

CAPACITY l

BLUE BOX 400e P.O.A.2400 per unit 15 (TANK ONLY)COMPATIBLE WITH UNIQA

BLUE BOX 400eThe Blue Box 400e is a high-quality polyethylene tank, versatile and easy to install. It is suitable for collecting clear, rain and wastewater from storm drains, washing machines, sinks and WCs in systems installed at a lower level than the sewer. Its large capacity of 400 litres makes it ideal for use in residential and industrial installations. A large number of technical features allow streamlined installation procedures and excellent service with low maintenance.

Blue Box 400e can be equipped with up to 2 pumps for systems requiring high flow rates or alternating duty cycles to avoid over-frequent start-ups. Pumps can be installed either inside or outside the tank to suit systems of all kinds.

Features:

– High capacity

– Can be installed in pairs

– Use with high-efficiency Uniqa series pumps

– Rugged walk over cover

– Emergency drainage fitting located low down in the unit in the event of prolonged blackouts

– Slots for floor mounting

– Integrated handles

– Watertight seals between pipes and Blue Box

B

191

B


192


B

ABOVE GROUND VORTEX PUMPING STATION

The Trojan range of compact pumping stations provides a complete unit supplied with vortex pumps, valves and control panel, which is easily installed and maintained.

Features:

– Polyethylene chamber

– Complete unit fitted with high efficiency single / dual vortex pumps

– IP68 – fully submersible

– 1.1kW, 1.5kW OR 3.0kW options


– DN100 Outlet. 80mm discharge available on request

– DN50 or DN100 inlet (55 VS)

– DN100 OR DN150 Inlet (150 VD)

– Pneumatic level control with LCD display, fault and alarm options available

– Max media temperature 55ºC

– Integrated non-return valve, 3kW non-return valve external

– 180mm minimum inlet height

– Supplied with 3.5m cable to motor and 3.5m pneumatic tube connecting Trojan to control unit (IP65 rated)

PERFORMANCE DATA

HEA

D / m

Q / m3/h

16

14

12

10

8

6

4

2

0 0 10 20 30 40 50

A B

C

FREE PASSAGE

mm

WEIGHT kg

PRICE £

RPM CAPACITY l


CURVE

8.17.6 1.1

9.93.3 1.5

156.2 3.0

8.12.9 1.1

356.2 3.0

8.17.6 1.1

9.93.3 1.5

15- -

8.12.9 1.1

41

49

35

41

35

41

49

0.65L PER ACTION

41

TROJAN 55 VS 1.1 230V 55 501400 P.O.A.43A \

TROJAN 150 VD 1.5 400V 150 501400 P.O.A.93B \

TROJAN 55 VS 3.0 400V 55 502800 P.O.A.63C \

TROJAN 55 VS 1.1 400V 55 501400 P.O.A.43A \

TROJAN 150 VD 3.0 400V 150 502800 P.O.A.130C \

TROJAN 150 VD 1.1 230V 150 501400 P.O.A.90A \

TROJAN 55 VS 1.5 400V 55 501400 P.O.A.45B \

MANUAL HAND PUMP N/A 40N/A P.O.A.16N/A

TROJAN 150 VD 1.1 400V A \ 150 501400 P.O.A.90

MAXIMUM

HEAD m

FLOW m3/h

OUTPUT

amp kW


15- -0.65L

PER ACTIONMANUAL HAND PUMP N/A 40N/A P.O.A.16N/A


193

B

ABOVE GROUND GRINDER PUMPING STATION

The Trojan range of compact pumping stations provide a complete unit supplied with grinder pumps, valves and control panel, which is easily installed and maintained.

Features:


– 55l or 150l capacity

– IP68 - fully submersible

– Complete unit fitted with high efficiency single / dual grinder pumps


– DN50 or DN100 inlet (55 GS)

– DN100 or DN150 inlet (150 GD)

– Pneumatic level control with LCD display, fault and alarm options available (IP68 rated)

– Maximum media temperature 55ºC



PERFORMANCE DATA

HEA

D / m

Q / m3/h

40

35

30

25

20

15

10

5

0 0 2 4 6 8 10 12 14 16 18

A

B

C

D

FREE PASSAGE

mm

WEIGHT kg

PRICE £

RPM CAPACITY l


CURVE

2210.5 1.7

253.7 1.7

356.5 3.2

223.7 1.7

35

39

6.5

6.5

3.2

3.2

396.5 3.2

253.7 1.7

223.7 1.7

17

17

17

17

17

17

17

17

17

TROJAN 55 GS 1.7/1 230V 55 8.52800 P.O.A.63A \

TROJAN 150 GD 1.7/2 400V 150 8.52800 P.O.A.130B \

TROJAN 55 GS 3.2/3 400V 55 8.52800 P.O.A.68C \

TROJAN 55 GS 1.7/1 400V 55 8.52800 P.O.A.63A \

TROJAN 150 GD 3.2/3 400V

TROJAN 150 GD 3.2/4 400V

150

150

8.5

8.5

2800

2800

P.O.A.

P.O.A.

140

140

C \

D \

TROJAN 55 GS 3.2/4 400V 55 8.52800 P.O.A.68D \

TROJAN 55 GS 1.7/2 400V 55 8.52800 P.O.A.63B \

TROJAN 150 GD 1.7/1 400V A \ 150 8.52800 P.O.A.130

MAXIMUM

HEAD m

FLOW m3/h

OUTPUT

amp kW


15- -0.65L

PER ACTIONN/A 40N/A P.O.A.16N/A

11

11

6.9

6.9

3.0

3.0

60

60

350

480

80

80

1400

1400

P.O.A.

P.O.A.

115

205

A \

A \

194


B

The Trojan range of compact pumping stations provides a complete unit supplied with vortex pumps, valves and control panel, which is easily installed and maintained.

Features:


– 350L or 480L capacity

– IP57 – temporarily submersible

– Complete unit fitted with high efficiency single / dual vortex pumps


– DN 150mm inlet and DN100 outlet


– Maximum media temperature 55ºC

– Integrated non-return valve



PERFORMANCE DATA

HEA

D / m

Q / m3/h

12

10

8

6

4

2

0 0 10 20 30 40 50 60 70

A

ABOVE GROUND LARGE VORTEX PUMPING STATION

FREE PASSAGE

mm

WEIGHT kg

PRICE £

RPM CAPACITY l

MANUAL HAND PUMP

TROJAN 350 VS 3.0 400V

TROJAN 480 VD 3.0 400V


CURVE MAXIMUM

HEAD m

FLOW m3/h

OUTPUT

amp kW


FREE PASSAGE

mm

WEIGHT kg

PRICE £

RPM CAPACITY l


CURVE

15- -0.65L

PER ACTIONMANUAL HAND PUMP N/A 40N/A P.O.A.16N/A

1311.2 4.0

1812.1 5.5

106.9 3.0

18

22

12.1

16.9

5.5

7.5

2216.9 7.5

1311.2 4.0

106.9 3.0

140

160

120

160

165

165

140

120

TROJAN 1000 CD 4.0 400V 1000 801400 P.O.A.220B \

TROJAN 480 CS 5.5 400V 480 1001400 P.O.A.225C \

TROJAN 480 CS 3.0 400V 480 801400 P.O.A.210A \

TROJAN 1000 CD 5.5 400V

TROJAN 1000 CD 7.5 400V

1000

1000

100

100

1400

1400

P.O.A.

P.O.A.

225

240

C \

D \

TROJAN 480 CS 7.5 400V 480 1001400 P.O.A.240D \

TROJAN 480 CS 4.0 400V 480 801400 P.O.A.220B \

TROJAN 1000 CD 3.0 400V A \ 1000 801400 P.O.A.370

MAXIMUM

HEAD m

FLOW m3/h

OUTPUT

amp kW


195

B

The Trojan range of compact pumping stations provide a complete unit supplied with channel pumps, valves and control panel, which is easily installed and maintained.

ABOVE GROUND CHANNEL PUMPING STATION

Features:


– 480L or 1000L capacity

– IP57 – Temporarily submersible

– Complete unit fitted with single / dual channel pumps

– Up to 100mm max solids handling

– DN150 inlet and DN100 outlet


– Supplied with 3.5m cable to motor and 3.5m pneumatic tube connecting Trojan to control unit

PERFORMANCE DATA

HEA

D / m

Q / m3/h

25

20

15

10

5

0 0 25 50 75 100 125 150 175

A B C D


196


The Pluto Pumping Station is the most effective means for collecting and removing excess water collected from cavity drainage systems.

The fully automatic unit is designed and built for reliability, long life and employs a high-performance pump range that can be selected to meet your specific application.

This range can also be used for small, domestic foul waste removal in an annex or extension.

Standard features:

– Single Automatic submersible pump (230V) with internal pipework, non-return valve, high level float switch

– High-level alarm unit featuring light and audible alarm with mute button

– Strong polyethylene chamber with 156 litre operating storage

– 40/63mm MDPE discharge connection

– Strong access cover

– 110mm inlets to accommodate standard drainage connections

B

OPTIONS

- SINGLE MAINS POWERED PUMP FOR AUTOMATIC OPERATION AND CHARGING SYSTEM

- DUAL MAINS POWERED PUMPS FOR DUTY STANDBY ARRANGEMENT, WITH DUAL PUMP CONTROL PANEL (230V)

TECHNICAL DETAILS

LIQUID CAPACITY: 156 LITRES

CHAMBER MATERIAL: MDPE

INLETS: 1 NO 110mm

1 NO 50mm

DISCHARGE: 40mm OR 63mm HDPE DEPENDING ON PUMP SELECTION

Other pumps available to suit your specific requirements

TWIN SYSTEM IN PLUTO TANK

AFTER SALES SUPPORT

- FULL AFTER SALES SUPPORT AVAILABLE FOR REGULAR MAINTENANCE AND EMERGENCIES

DRAINAGE WATER PUMPS

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/sec

15

10

5

0 0 2 4 6 8 10 12

DG Blue 50 DG Blue 75DG Blue 100 DG Blue 150

SEWAGE WATER PUMPS

Liberator 400

Trencher 400

PERFORMANCE DATA

HEA

D / m

CAPACITY / l/min

20

18

16

14

12

10

8

6

4

2

0 0 50 100 150 200 250 300 350 400 450

Trencher 750

Liberator 750Goliath 150

PERFORMANCE DATA

HEA

D / m

CAPACITY / m3/h

16

14

12

10

8

6

4

2

0 0 5 10 15 20 25 30 35

Goliath 250

Goliath 400

Goliath 550

Goliath 750




Always have access to our RIBA accredited CPD’s for information on the go or request for one of our experienced sales engineers to come to your office for a ‘Lunch and Learn’ CPD seminar.

Find out more about our CPD’s on our website:

ttpumps.com/specialists-bespoke-solutions/cpd/

CONTINUED PROFESSIONAL DEVELOPMENT

ttpumps.com 01630 647200


The Planet Range of Package Pumping Stations, designed and manufactured by T-T and approved by the BBA, provide an efficient and economical way of installing a sewage or drainage pumping station.

Features:

– Pump chambers are well engineered and manufactured, and have passed rigorous and detailed testing, site inspections and factory production control assessment by the British board of agrément to achieve certification approval

– Smooth internal walls aid the hygiene disposal of effluents, to avoid smells and septicity

– Units can be adapted to suit individual requirements at manufacturing stage

– Each pump chamber is made of strong medium-density polyethylene

– Packages come complete with pipework pre-assembled in the chamber, ready for installation into the ground, after which the pumps and control equipment are added

– All package pumping stations are supplied with controls for fully automatic operation, and a high-level alarm indicator.

– Packages are available on short lead-times to fit in with tight construction schedules

– A comprehensive instruction manual is provided

PACKAGE PUMPING STATIONS

MERCURY® SINGLE/DUAL*PUMP VENUS® SINGLE/DUAL*PUMP

JUPITER® SINGLE/DUAL*PUMPSATURN® SINGLE/DUAL*PUMP

The Mercury® is ideal for small flows from a single dwelling and where excavation depth is limited.

COMPATIBLE PUMPS

- CUTTER 80mm

- GRINDER 50mm

- VORTEX 50mm / 80mm

*Dual pumps only available with 50mm Vortex / Grinder.

* Extension turret available on this model

1.2m

1m The Venus® chamber is the most popular size for use in a single dwelling, toilet block, or small office.

COMPATIBLE PUMPS

- CUTTER 80mm

- GRINDER 50mm

- VORTEX 50mm / 80mm

*Dual pumps only available with 50mm Vortex / Grinder.

* Extension turret available on this model

2.3m

1m

The Saturn® chamber is suitable for small housing and industrial / commercial developments, restaurants, small hotels / nursing homes, caravan sites.

COMPATIBLE PUMPS

- CUTTER 80mm / 100mm

- GRINDER 50mm

- VORTEX 50mm / 80mm / 100mm

- CHANNEL 80mm / 100mm

2m –

4.5

m

1.5mThe Jupiter® chamber is suitable for larger developments, hotels, hospitals, sewage works. The basic unit is capable of special build modification to provide capacities up to 15,500 litres, and can be incorporated into schemes where, for example, Sewers for Adoption specification is required.

COMPATIBLE PUMPS

- CUTTER 80mm / 100mm

- GRINDER 50mm

- VORTEX 50mm / 80mm / 100mm

- CHANNEL 80mm / 100mm / 150mm

2.5m

– 4

.5m

2.1m

A wide range of submersible pumps can be used for the Package Pumping Stations; we are able to select these from T-T’s complete range, in order to match your requirements.

IMPORTANT

The information given in this publication is for your initial guidance. For each scheme, general arrangement drawings are issued on receipt of order. For your further assistance, more comprehensive details are available, and we will be pleased to provide additional information and advice. Our aim is to provide you with a completely satisfactory solution for your pumping needs.



TYPICAL DUAL PUMP PACKAGE PUMPING STATION

2-CABLE DUCT INLETS

HIGH-LEVEL ALARM FLOAT-SWITCH

LEVEL CONTROL FLOAT-SWITCHES

CONCRETE SURROUND BY CLIENT

OPTIONAL EXTERNAL INLETPIPEWORK ACCEPTS 160mmO/D PIPE (OR 110mm O/DWITH ADAPTOR)

3-STANDARD INLET SOCKETS ACCEPT 160mm O/D PIPE (OR 110mm O/D WITH ADAPTOR)

COVER SLAB BY CLIENT

ISOLATING GATE VALVE

OUTLET FOR CONNECTION TO RISING MAIN

PIPEWORK 50mm / 80mm / 100mm / 150mm

2 NON-RETURN VALVES

PUMP

INLET

DISCHARGE

INLET

OPTIONAL INLET PIPEIN 3 POSITIONS

INLET CONNECTION

OPTIONAL INLET PIPE

IN 3 POSITIONS

EXTENSION TURRET

The extension turret is an innovative design that allows the installer to change the depth of chamber installation to suit site specific levels. The previous range was restricted to the station design depth only, however T-T have witnessed that due to site complications and requirements it would be useful to be able to extend the depth of the tank. The extension turret is placed on top of the tank and clamped and sealed in place and can be cut at set increments to adjust the height of the pumping station chamber to suit requirements.

The extension turret is available on the Mercury and Venus models.

INLET



andXL

The XL & XXL Planet® Range of Package Pumping Stations, designed and manufactured by T-T, provide an efficient and economical way of installing a sewage / drainage pumping station.

To avoid the requirement for expensive additional storage solutions, T-T offers a range of extra large (XL) and extra, extra large (XXL) preformed pumping stations, catering for your emergency storage requirements within a single preformed unit.

Where the need to discharge effluent to the local sewer network at a reduced rate is required (due to capacity/saturation), the XL and XXL range of package pumping stations can provide a single solution to hold/store flows and discharge at the permitted rate.

Features:

– Designed and manufactured in the UK

– Pump stations are well-engineered and manufactured, and have passed rigorous and detailed testing, site inspections and factory production control assessment

– Each pump chamber is made of strong medium-density polyethylene

– Smooth internal walls aid the hygiene disposal of effluents,to avoid smells and septicity

– Packages come complete with pipework pre-assembled in the chamber, ready for installation into the ground, after which the pumps and control equipment are added

– All package pumping stations are supplied with controls for fully automatic operation, and a high-level alarm indicator as standard

– Units can be adapted to suit individual requirements at manufacturing stage

– Packages are available on short lead-times to fit in with tight construction schedules

– A comprehensive instruction manual is provided

XL WITH PUMP SUMP

XXL WITH PUMP SUMP

IMPORTANT

The information given in this section is for your initial guidance. For each scheme, general arrangement drawings are issued on receipt of order.

For your further assistance, more comprehensive details are available, and we will be pleased to provide additional information and advice. Our aim is to provide you with a completely satisfactory solution for your pumping needs.

APPLICATIONS

- DOMESTIC

- COMMERCIAL

- INDUSTRIAL

A wide range of submersible pumps can be used for the Package Pumping Stations; we are able to select these from T-T’s complete range, in order to match your requirements.

The XL and XXL range are also available without sump.



TYPICAL DUAL PUMP PACKAGE PUMPING STATION

MODEL CHAMBER INTERNAL INTERNAL EXTERNAL EXTERNAL WITH PUMP REF SIZE DIAMETER LENGTH DIAMETER LENGTH SUMP LITRES mm mm mm mm HEIGHT mm

XL 10000 2200 3100 2400 3300 2900

XL 12500 2200 3750 2400 3950 2900

XL 15000 2200 4420 2400 4620 2900

XL 17500 2200 5070 2400 5270 2900

XL 20000 2200 5730 2400 5930 2900

XL 22500 2200 6390 2400 6590 2900

XL 25000 2200 7050 2400 7250 2900

XL 27500 2200 7710 2400 7910 2900

XL 30000 2200 8370 2400 8570 2900

XL 35000 2200 9680 2400 9880 2900

XL 40000 2200 1100 2400 11200 2900

XXL 30000 3200 4390 3450 4640 3900

XXL 25000 3200 3760 3450 4010 3900

XXL 32500 3200 4700 3450 4950 3900

XXL 35000 3200 5010 3450 5280 3900

XXL 37500 3200 5320 3450 5570 3900

XXL 40000 3200 5830 3450 5880 3900

XXL 42500 3200 5940 3450 6190 3900

XXL 45000 3200 6250 3450 6500 3900

XXL 47500 3200 6560 3450 6810 3900

XXL 50000 3200 6870 3450 7120 3900

XXL 55000 3200 7500 3450 7750 3900

XXL 60000 3200 8120 3450 8370 3900

XXL 65000 3200 8740 3450 8990 3900

XXL 70000 3200 9370 3450 9620 3900

XXL 75000 3200 9990 3450 10240 3900

XXL 80000 3200 10610 3450 10880 3900

XXL 85000 3200 11230 3450 11480 3900

XXL 90000 3200 11650 3450 12100 3900

COVER SLAB BY CLIENT

CONCRETE SURROUND BY CLIENT

2 NON-RETURN VALVES

OUTLET FOR CONNECTION TO RISING MAIN

OPTIONAL EXTERNAL INLET PIPEWORK ACCEPTS 160mm O/D PIPE

(OR 110mm O/D WITH ADAPTOR

HIGH-LEVEL ALARM FLOAT-SWITCH. POSITION TO BE CONFIRMED BY

CLIENT AT ORDER STAGE

INLET SOCKETS AVAILABLE POSITIONS

TO BE DETERMINED

ISOLATION GATE VALVE

DUAL OR TRIPLE PUMPS WITH THE OPTION OF SEPARATE OR COMBINED DISCHARGE PIPES. PIPEWORK OPTIONS: 50mm / 80mm / 100mm / 150mm / 200mm

GALVANISED ACCESS COVER

LEVEL CONTROL FLOAT-SWITCHES

andXL



STAGES FROM CONCEPT TO ADOPTION

ADOPTABLE PUMPING STATIONS

DESIGN

Post receipt of order, a full set of mechanical and engineering drawings will be prepared for submission to the appropriate water authority.

EQUIPMENT MANUFACTURE

Once design approval has been obtained, the final manufacturing stage will commence for the pumps, control system, pipework, valves and ancillary equipment – a bespoke arrangement to your site’s specific requirements.

Lead times are kept to a minimum and due to the in-house manufacture of most equipment and our large stock-holding there is no need for external resources.

INSTALLATION

All installation work is carried out by our own highly trained and skilled installation teams who have the necessary combined electrical /mechanical skills to install pumping stations. A full installation report is left with the developers’ site representative detailing any items which need attention related to the civil work or the M&E installation prior to commissioning.

COMMISSIONING

Our commissioning engineers will undertake a full check of the installation, ensuring that the installation is safe and meets all of the required standards. A full installation report will be given and a certificate of electrical completion is also issued once all equipment has been commissioned.

MAINTENANCE PERIOD

The mechanical and electrical equipment provided in our pumping systems are offered with a 12 month warranty as standard against any defective parts/faults, unfortunately this does not include for blockages, misuse or vandalism. Extended warranties can be offered on request.

In addition, our Service Department will follow up our commissioning visit with an offer of a maintenance contract whereby you will be able to have peace of mind that your installation will be regularly inspected and maintained thus reducing the risk of unnecessary expensive breakdowns. Service visits can be tailored to meet your needs and can be adjusted as necessary.

ADOPTION

We are familiar with the requirements of all Utility Companies which enables us to provide the correct equipment to meet the needs of your particular scheme.

T-T will control the Adoption process from concept through to Adoption on your behalf to ensure a smooth handover to the Utility Company incorporating all documentation from a design package to operating and maintenance manuals. Pre-handover inspections are a standard feature of our service liaising with the Adoptions Engineers to ensure a smooth, uninterrupted handover.



STAGES FROM CONCEPT TO ADOPTION

ADOPTABLE PUMPING STATIONS

WHAT IS SEWERS FOR ADOPTION?

The basis of Sewers for Adoption is to ensure that the developer builds to a required standard and quality. To achieve ‘Adoption’ of a pumping station the specification, build and installation of the system would have to be compliant with Local Water Company specifications. Details of these specifications are found in the ‘Sewers for Adoption’ guidelines, published by WRc Plc, which is the standard set for the design and construction of sewers within the UK.

SEWERS FOR ADOPTION

For housing developments, it’s both practical and cost-effective to construct a wastewater and sewage pumping station that can be ‘adopted’ by the local water company – eliminating the developers’ responsibility for future maintenance and running costs.

Having worked with all Water Companies over the years T-T are fully aware of their requirements, expectations and current legislation. This enables us to ensure that your project runs smoothly and that the station is Adopted within the fastest most cost-effective time frame.

CONCEPT TO PROJECT

We like to be involved at the early stage to advise on the most effective way to position and construct the pumping station and what is the most economical solution. Each client will receive a single specialist to liaise with on a day-to-day basis and who will manage your project.

TENDER / QUOTATION / ORDER

A competitively priced service is offered that will meet with your criteria, with no additional hidden costs and on receipt of official instruction to proceed you will receive an agreed programme of works.

DESIGN

In-house design facilities are used, incorporating the latest technology, to create full design and manufacturing drawings, these will be specific to your project. Having this feature in-house allows us greater flexibility to respond to design up-dates and amendments. During the design process, we will if required, communicate with the Water Company and the developers’ design team to ensure that all aspects of the pumping station are comprehensively covered.

United Utilities Water

Northumbrian Water

United Utilities Water

Yorkshire Water

Anglian Water

Severn Trent Water

Welsh Dwr Cymru Water

Thames Water

Southern Water

Wessex Water

South West Water

H.Q. Woore Cheshire



TYPICAL ADOPTABLE PUMPING STATION

WHY CHOOSE T-T PUMPING STATIONS?

PUMPS

READY SUMP

AUTO-COUPLING

LEVEL CONTROL

GUIDERAIL

WET WELL CHAMBER

PIPEWORK INLET CHAMBER AND PENSTOCK VALVE

ACCESS COVER

VALVE CHAMBER

GATE VALVE ANDSWING CHECK VALVE

TO CONTROL OUT GOING FLOWS

GENERALLY IN DUCTILE IRON AND SIZED SPECIFICALLY FOR EACH SITE

TO HOUSE PUMPS AND PIPEWORK

FOR SAFE REMOVAL OF PUMPS FROM THE WET WELL

FOR EASY INSTALLATION OF PUMPS

IN ACCORDANCE WITH SEWERS FOR ADOPTION REQUIREMENTS AND TO ACHIEVE THE REQUIRED FLOW RATE

TO HOUSE VALVES AND ENABLE SAFE MAINTENANCE

ALLOWS ACCESS FOR REMOVAL OF PUMPS WHILST KEEPING WET WELL SECURE

TO ENABLE CONTROL OF INCOMING FLOWS

FROM SITE

PREFORMED BENCHING UNIT REDUCING LABOUR INTENSIVE PROCESS OF MANUALLY BENCHING WET

WELL AND GUARANTEEING CONCRETE FINISH

T-T are a one-stop shopWe handle the whole process from initial enquiry to final installation, commissioning and handover. We have six divisions, T-T Pumps, T-T Controls, T-T Flow, T-T Environmental and Agricultural, T-T Pumping Stations and T-T Service, this means that we can utilise each divisions expertise to supply the best possible products supported by each individual division’s expertise and knowledge.

No sub-contractingT-T handle the whole process themselves, this means we do not need to rely on sub-contractors to complete any stage of the work. Therefore we can guarantee lead times to project completions.

In-house drawing and manufactureT-T have a dedicated design team who have the capabilities to complete drawings on 2D CAD and 3D solid works. This means we have full control over the design of the pumping station and can ensure this suits the site design.

Complete process guidanceT-T ensure they guide their clients through the complete process, we ensure we give our clients the support they need to complete projects, while handling all the elements we need to ourselves.

Pre-Installation InspectionsWe will visit your site for a pre-installation check. We do this to make sure the site is ready for our installation team and avoids any delays on complications during the installation process.

Detailed drawings and reportsYou will receive detailed drawings and reports to allow you to effectively plan and incorporate your pumping station into the project management process.

Large stock holdingT-T have a large stock holding of chambers, pumps, valves and ancillary equipment meaning we can supply equipment to tight deadlines and schedules.

Established in 1959We have many years of experience, and are professionals in providing the highest quality equipment which is installed to an extremely high standard.



Duty of Care

Avoid detrimental flooding by ensuring your pumping station is regularly serviced. The owners and operators of pumping stations have a duty of care to ensure minimal environmental damage.

SERVICE ADDITIONAL SERVICES

Tankering

We can assist in getting your pumping station tankered and jetted with our tankering partners.

Let us take the stress away by of arranging and co-ordinating this for you, T-T only work with professional companies who we have built up good working relationships with and who we trust. We liaise with the company, book visit, raise purchase orders and pay invoices. We charge a 15% admin fee on top of the tankering company invoice. Please note: we are unable to give accurate quotes for this service, as it depends on the time on site and disposal amounts.

Water Testing

We carry out full water testing backed by full certification for TVC22C, TVC37C, E.coli, Conliforms, Pseudomonas and Legionella.

Complete Packages1. Purchase your pumping stations

from us.2. Have it installed by our fully

trained mechanical and electrical engineers.

3. Take the worry out of maintaining a pumping station by taking out a T-T Service Agreement.

The standard package includes two services per year for dual stations and one service per year for a single station.

Comprehensive service of pumping equipment as per our example service schedule

Return of any failed pumps to our workshop for quotation of repair or replacement.

Priority breakdown charged at our standard hourly rate

15% discount on all T-T products for the site registered on the Service Agreement

Two breakdowns, one T-T pump and all T-T parts (only available on T-T installed stations)

Arrangement of tankering with our partner. 15% administrator fee

Monitoring of pumping station, including weekly status reports and advice of failures (subject to conditions of our out of hours contract)

Full comprehensive service reports

One pump replacement if required

The package includes all the standard package benefits plus our Seer monitoring services. Our monitoring service ensures your station is monitored by T-T 24/7.

SERVICE BENEFITS:

- REDUCED RUNNING COSTS INCLUDING ENERGY AND MAINTENANCE

- GREATER LIFE EXPECTANCY FOR PUMPING EQUIPMENT

- REDUCED RISK OF BREAKDOWN WITH ITS RESULTANT

- BETTER PLANT UTILISATION AND RETURN ON CAPITAL

- IMPROVED ENVIRONMENTAL CONDITIONS

- IF YOU HAVE A SERVICE AGREEMENT YOU WILL RECEIVE PREFERENTIAL TERMS FOR PARTS AND LABOUR, AND PRIORITY RESPONSE FOR SERVICE ATTENDANCE ON-SITE

NATIONWIDE COVERAGE

HEAD OFFICE

T-T Level One

T-T Level One StandardService

T-T Level Two

T-T Level Two Advanced

T-T Level Three

T-T Level Three Premier

Our premier agreement includes two services per year, all parts plus one pump per year if required plus two breakdown call outs included.

Service Agreements

As an owner or operator of a sewage or drainage pumping station, you will want peace of mind that your pumping station operates efficiently, whilst also being environmentally friendly. Our service agreements help to meet these aims and avoid unexpected and costly breakdowns. With our skilled in-house group of experts and on-site engineers, we are able to offer a comprehensive after sales service to a large number of customers. Provided by the experienced maintenance team at T-T.

Visit page 184 to find out more about our revolutionary Seer Monitoring System.


NOTES



www.ttpumps.com / T: +44 (0) 1630 647200

INDEX

www.ttpumps.com / T: +44 (0) 1630 647200 Same day dispatch. Please note: Our minimum order is £50. Please check our website for the most up-to-date prices and stock availability.208

12 – INDEX

# 4HS Range ..............................................................................................Section 6 / 108

A Adjustable Outreach Support Bracket..................................................Section 9 / 172 Adoptable Pumping Stations ...............................................................Section 11 / 202 AF Flow Mixer Series ...............................................................................Section 5 / 68 AG90 Diesel Transfer Pump ..................................................................Section 7 / 119 AG ATEX Range .......................................................................................Section 7 / 120 Alarm-Tel ..............................................................................................Section 10 / 182 Alert / Alert Pro .....................................................................................Section 10 / 182 AP Blue Professional ...............................................................................Section 1 / 17 APG Range ................................................................................................Section 1 / 18 Aquabrake Double Orifice Air Valve ......................................................Section 9 / 163 Aquabrake Mini Single Small Orifice Air Valve ....................................Section 9 / 162 Aquabrake Single Large Orifice Air Valve .............................................Section 9 / 164 Aquavault Resilient Seat Wedge Gate Valve .........................................Section 9 / 144 Aquavault Resilient Seat Wedge Gate Valve with ISO Interface .........Section 9 / 145 Auto-Coupling Sets ................................................................................Section 8 / 139 Autodiver ...................................................................................................Section 6 / 97

B Ball Brake ...............................................................................................Section 9 / 157 Bellow Pumps .........................................................................................Section 7 / 125 Bevel Gearbox .........................................................................................Section 9 / 170 Bi-directional Knife Gate Valve ..............................................................Section 9 / 151 Blue Box ................................................................................................Section 11 / 191 Blue Box 400e .......................................................................................Section 11 / 191 Booster Sets ...........................................................................................Section 6 / 104 Brass Ball Valve ......................................................................................Section 9 / 168 Brass Gate Valve .....................................................................................Section 9 / 168 Brass Spring Check Valve ......................................................................Section 9 / 169 Brass Spring Check Valve with Strainer ...............................................Section 9 / 169 Brass Swing Check Valve .......................................................................Section 9 / 170

C Cable ..........................................................................................................Section 3 / 47 Camlock Fittings ....................................................................................Section 8 / 136 CDL / CDLF ...............................................................................................Section 6 / 95 CDLK (F) Range ......................................................................................Section 7 / 132 CFS Shredder Series ................................................................................Section 5 / 82 CHLF Range ..............................................................................................Section 6 / 91 CM / CMP Series ......................................................................................Section 6 / 87 Compact Wastewater Air Valve ..............................................................Section 9 /160 Compactors Screening & Screen Extractors ........................................Section 5 / 84 Conversion Kit ...........................................................................................Section 3 / 47 Counter Flanges .....................................................................................Section 6 / 113 Counterweights ....................................................................................Section 10 / 179

D DG Blue Professional ...............................................................................Section 2 / 21 DG Steel.....................................................................................................Section 2 / 20 DGG Range ................................................................................................Section 2 / 24 DGO Ranges ..............................................................................................Section 2 / 22 DGX Stainless Steel Range ......................................................................Section 2 / 23

Diaphragm Pumps ...................................................................................Section 4 / 61 Discharge Bends ....................................................................................Section 8 / 137 Double Hinge Flap Valve ........................................................................Section 9 / 158 DR Blue Professional ...............................................................................Section 1 / 11 DR Steel....................................................................................................... Section 1 / 9 DRB Bronze ..............................................................................................Section 1 / 12 DRG Range ................................................................................................Section 1 / 14 Drill Pumps .............................................................................................Section 7 / 125 DRO Range ................................................................................................Section 1 / 12 DRX Stainless Steel ..................................................................................Section 1 / 13 DRY Range ................................................................................................Section 1 / 16 Dual Plate Check Valve ..........................................................................Section 9 / 158 Duckfoot ..................................................................................................Section 8 / 139

E E-Flow Range ...........................................................................................Section 2 / 26 Eccentric Plug Valve ...............................................................................Section 9 / 151 EP Bronze Range ...................................................................................Section 7 / 116 EP Stainless Steel Range ......................................................................Section 7 / 117 Equilibrium Ball Float Valve ..................................................................Section 9 / 167 ETO Series .................................................................................................Section 5 / 73 ETV Series .................................................................................................Section 5 / 74 Extension Spindles .................................................................................Section 9 / 172

F FC Series ...................................................................................................Section 6 / 88 Filter Equipment .....................................................................................Section 7 / 127 ..................................................................................................................Section 7 / 129 Flexible Hoses .........................................................................................Section 6 / 112 Float Switch – Economy option ...........................................................Section 10 / 179 Float Switches ......................................................................................Section 10 / 178 Floaway....................................................................................................Section 9 / 159 FloodBuddy ...............................................................................................Section 3 / 48 Floor Mounted Pedestal ........................................................................Section 9 / 172 Flush Valve ..............................................................................................Section 8 / 139 FS – 4” Series..........................................................................................Section 6 / 106

G Gearboxes ...............................................................................................Section 9 / 171 Goliath .......................................................................................................Section 1 / 10 GR Blue Professional ...............................................................................Section 2 / 28 GRG Range ................................................................................................Section 2 / 29 Grey Series ........................................................................................Section 2 / 33 – 35 GRI / Grinder Range .................................................................................Section 2 / 28 GRP Kiosk .............................................................................................Section 10 / 186

H Hand Pumps ...........................................................................................Section 7 / 125 HBC Biocell ...............................................................................................Section 5 / 80 Hi-Dro Boost ...........................................................................................Section 6 / 104 Hose / Fittings .........................................................................................Section 8 / 134 Hose Couplings ......................................................................................Section 8 / 135 Hydraulic Pumps ......................................................................................Section 5 / 83

12 – INDEX

T: +44 (0) 1630 647200 / www.ttpumps.com Please check our website for the most up-to-date prices and stock availability. Please note: Our minimum order is £50. Same day dispatch. 209

I Interchangeable Bladders .....................................................................Section 6 / 113 IR Range ....................................................................................................Section 6 / 98 IRON50 Diesel Transfer Pump ..............................................................Section 7 / 118 IRON75 & IRON100 Diesel Transfer Pump ..........................................Section 7 / 119

J J Range....................................................................................................Section 7 / 130

K KF Series ...................................................................................................Section 6 / 86 Kiosks ....................................................................................................Section 10 / 186KT Sand Devil ............................................................................................Section 3 / 52 KTA Range .................................................................................................Section 3 / 53 KTA/S Range .............................................................................................Section 3 / 53 KTC Range ................................................................................................Section 3 / 52 KTH Range ................................................................................................Section 3 / 55 KTH/S Range ............................................................................................Section 3 / 54 KTS Range ................................................................................................Section 3 / 50KTSE Range ..............................................................................................Section 3 / 51

L L Series .....................................................................................................Section 6 / 99 Layflat Hose ..............................................................................................Section 3 / 47 ..................................................................................................................Section 8 / 134 Lever Pump .............................................................................................Section 7 / 125 Liberator ....................................................................................................Section 3 / 44 Liberator Vortex ........................................................................................Section 3 / 43 Libra .......................................................................................................Section 10 / 177 Lifting Equipment ...................................................................................Section 8 / 141 Loopak ...................................................................................................Section 11 / 190 Lubricant Gear Pumps ..........................................................................Section 7 / 123 Lubricant Meters ....................................................................................Section 7 / 128 Lugged / Tapped Butterfly Valve ............................................................Section 9 / 150

M M Series ....................................................................................................Section 6 / 89 M Series (stainless steel) .........................................................................Section 6 / 90 Mandals Hose ...........................................................................................Section 5 / 81 Manual / Automatic Fuel Nozzles .........................................................Section 7 / 126 Mechanical Meters .................................................................................Section 7 / 122 Metal Seat Gate Valve DN50 – DN300 PN16 ........................................Section 9 / 146 Metal Seat Gate Valve DN50 – DN300 PN16 with ISO Interface .........Section 9 / 147 Metal Seat Gate Valve DN80 – DN300 PN25 ........................................Section 9 / 149 Metal Seat Gate Valve DN80 – DN300 PN25 with ISO Interface .........Section 9 / 149 Metal Seat Gate Valve DN350 – DN1200 PN16 ....................................Section 9 / 148 Metal Seat Gate Valve DN350 – DN1200 PN16 with Bypass ..............Section 9 / 148Metal Seat Swing Valve DN80 – DN300, Drilled BS10 D/E .................Section 9 / 155 Metal Seat Swing Check Valve DN50 – DN300 PN16 ..........................Section 9 / 154 Metal Seat Swing Check Valve DN350 – DN1200 PN16......................Section 9 / 156 MK Series ..................................................................................................Section 6 / 96 Mini Fuel Station .....................................................................................Section 7 / 121 MS ..............................................................................................................Section 6 / 92 MSU ...........................................................................................................Section 5 / 78 MXL Mixer Series......................................................................................Section 5 / 79

MXT ............................................................................................................Section 5 / 82

N NCB/Z ......................................................................................................Section 6 / 100NCBK/Z ...................................................................................................Section 6 / 101 Nipples, Sockets and Bushes ...............................................................Section 8 / 138 Nozzles ....................................................................................................Section 7 / 126 NR – 6” ....................................................................................................Section 6 / 106 NS – 4” .....................................................................................................Section 6 / 107

O OP Range .................................................................................................Section 6 / 90Oxygen Range ...........................................................................................Section 5 / 67 Oxyplate .....................................................................................................Section 5 / 66 Oxytube ......................................................................................................Section 5 / 66

P PalPack .....................................................................................................Section 3 / 46 Penstock ..................................................................................................Section 9 / 157 Piston Pump ...........................................................................................Section 7 / 125 Planet Range Package Pumping Stations .........................................Section 11 / 198Plastic Combination Air Valve................................................................Section 9 / 166 PLD Series ................................................................................................Section 5 / 79 Pluto ......................................................................................................Section 11 / 196 Pneumatic Lubricant Pumps ................................................................Section 7 / 124 Pontoon .....................................................................................................Section 3 / 58 Press 10 / 20 / 30 ..................................................................................Section 10 / 180..................................................................................................................Section 6 / 111 Pressure Controller ..............................................................................Section 10 / 180 Pressure Gauge ......................................................................................Section 6 / 112 Pressure Reducing Valve .......................................................................Section 9 / 167 Pressure Switch .....................................................................................Section 6 / 112 Pressure Transducer .............................................................................Section 6 / 112 Pressure Vessels ....................................................................................Section 6 / 109 Pressure Vessels (stainless steel) ........................................................Section 6 / 110 PT Series ...................................................................................................Section 5 / 75 PTH Series ................................................................................................Section 5 / 76 PTO / PTD Series ......................................................................................Section 5 / 77 PTS 40 ........................................................................................................Section 5 / 70 PTS 65 – 150 Series ..................................................................................Section 5 / 70 ....................................................................................................................Section 2 / 30 PTS 100K – 200 .........................................................................................Section 5 / 72 PTSH ..........................................................................................................Section 5 / 83 PuddleMate ...............................................................................................Section 3 / 48 PuddlePal ..................................................................................................Section 3 / 45 PuddlePal Junior ......................................................................................Section 3 / 45 Pulse Meter.............................................................................................Section 7 / 129 Pump Hooks ...........................................................................................Section 8 / 140 Pump Stands ..........................................................................................Section 8 / 142 PumpPal / PumpPal Pro .....................................................................Section 10 / 174

Q QY Range ...................................................................................................Section 6 / 94

www.ttpumps.com / T: +44 (0) 1630 647200 Same day dispatch. Please note: Our minimum order is £50. Please check our website for the most up-to-date prices and stock availability.210

12 – INDEX

R RainCycle Controller ............................................................................Section 10 / 174 RC500 / RC900 ........................................................................................Section 6 / 105 Ready Level ...........................................................................................Section 10 / 179Recoil Check Valve..................................................................................Section 9 / 156 Reversing Spur Gearbox ........................................................................Section 9 / 171 Rotary Pump ...........................................................................................Section 7 / 118

S S151 – 6” ..................................................................................................Section 6 / 107 S181 – 8” ..................................................................................................Section 6 / 108 Saferise Double Orifice Air Valve ...........................................................Section 9 / 165 Samsump .................................................................................................... Section 1 / 9Scum Skimmer .........................................................................................Section 5 / 65 SCR Range ................................................................................................Section 4 / 60 Seer Monitoring Unit ............................................................................Section 10 / 184Service ...................................................................................................Section 11 / 205SKD/Z ......................................................................................................Section 6 / 102 Smart 10 / Smart 16 / Smart 25 ..........................................................Section 10 / 179..................................................................................................................Section 6 / 110 SMD – Diaphragm Pumps .......................................................................Section 4 / 61 SO / SC Range ..........................................................................................Section 6 / 93 SP20 / SP21 (ATEX) ...................................................................................Section 3 / 56 SP35 / SP45 ...............................................................................................Section 3 / 57 SP55 / SP65 ...............................................................................................Section 3 / 57 Spring Check Valve .................................................................................Section 9 / 158 Spur Gearbox ..........................................................................................Section 9 / 171 SST Range – Semi Trash .........................................................................Section 4 / 60 Standard DOL / ASD Panels ................................................................Section 10 / 176 Standard Motor Starters ......................................................................Section 10 / 175ST-R Range ...............................................................................................Section 2 / 32 Suction Hose ...........................................................................................Section 8 / 134 Sumpy .......................................................................................................... Section 1 / 8 SWB Range ...............................................................................................Section 6 / 92 Swing Check Valve ..................................................................................Section 9 / 154 SWT Range – Trash ..................................................................................Section 4 / 61

T T-Keys ......................................................................................................Section 9 / 172 T-T 100 ......................................................................................................... Section 1 / 8 T-T Farm Wash .........................................................................................Section 5 / 64 T-T Separator Range................................................................................Section 5 / 78 T-T Utility Box .......................................................................................Section 11 / 190 T-T Well ...................................................................................................Section 6 / 105 TBHM .........................................................................................................Section 5 / 83 TBM Mixer Range .....................................................................................Section 5 / 69 TBX Mixer Range ......................................................................................Section 5 / 68 Text-Tel Series ......................................................................................Section 10 / 183 Trencher ....................................................................................................Section 3 / 42 Trencher Slurry Mate ...............................................................................Section 3 / 43 Trojan Above Ground Pumping Stations ..................................Section 11 / 192 – 195 TT1008 / TT1409 ........................................................................................Section 2 / 30 TT305 / TT505 / TT510 ..............................................................................Section 2 / 29 TT505C .......................................................................................................Section 3 / 49

U Uniqa Range .....................................................................................Section 2 / 36 – 39Uni-Directional Knife Gate Valve - Pneumatic ....................................Section 9 / 152Uni-Directional Knife Gate Valve - Pneumatic S/S .............................Section 9 / 152Uni-Directional Knife Gate Valve - Handwheel ...................................Section 9 / 153Uni-Directional Knife Gate Valve - Handwheel S/S .............................Section 9 / 153

V V-Flow ........................................................................................................Section 2 / 27 Valve Operating Equipment ...................................................................Section 9 / 172 Vasco ........................................................................................................Section 6 / 111 ................................................................................................................Section 10 / 180

W Wafer Butterfly Valve ..............................................................................Section 9 / 150 Wastewater Air Valve ..............................................................................Section 9 / 161 Water Connection (multiway fitting) .....................................................Section 6 / 112 WP25 ..........................................................................................................Section 3 / 56

Z ZS Range ...................................................................................................Section 6 / 94

T: +44 (0) 1630 647200 / www.ttpumps.com Please check our website for the most up-to-date prices and stock availability. Please note: Our minimum order is £50. Same day dispatch. 211

NOTES

T-T Controls & Automation, T-T Flow Valves, T-T Pumping Stations, T-T Environmental & Agricultural and T-T Service are Divisions of T-T PUMPS Ltd.T-T PUMPS Ltd: Registered in England & Wales Reg. No: 230012

Tel: +44 (0) 1630 647200 Fax: +44 (0) 1630 642100 www.ttpumps.com Email: [email protected]

T-T PUMPS Ltd. Onneley Works, Newcastle Road, Woore, Cheshire, CW3 9RU, United Kingdom

©T-T PUMPS Ltd. 2020. DATA1781: 01/03/2020. This document is printed on paper from a sustainable source.

product catalogue - t-t pumps...potable / clean water pumps industrial / lubricant / fuel pumps pump...

Documents