product catalog€¦ · product catalog quality farm equipment and skid steer attachments. 2 42739...
TRANSCRIPT
Farm testedFarmer inspired
PRODUCT CATALOG
Quality Farm Equipment and
Skid Steer Attachments
833.352.3477 42739 County Road 184 • Sauk Centre, MN 56378 32
Farm tested. Farmer inspired.We believe it takes a farmer to know a farmer, and the equipment they depend on to make a living. Messer Repair and Fabricating is family owned by third-generation farmers in central Minnesota who have a rich history in dairy business. For more than 10 years, Nathan and Jana Messer have been proud to dedicate their time in the company’s day-to-day operations in order to provide high quality attachments. You’ll notice the difference in the quality of our products.
Co
nte
nts
42739 County Road 184 • Sauk Centre, MN 56378
Bale handlingSquare & Combo Bale Forks 4-5Round Bale Spears 4Bale Spear Extensions 5Replacement Bale Spears 6Forklift Mounted Bale Spear 6Bale Squeezer 7
DairyStall Plow/Bedding Extractor 8-9Feed Pusher 10Freestall Groomer 11Manure Scraper 12
Wood Splitting & tree HANDLInG Wood Splitter/Tree Shear 13Tree & Post Puller 14Stump Bucket 14Tree Scoop 15Brush & Root Grapple 15
Material handling Rock Bucket 16Rock Bucket Grapple 16Manure Fork 17Manure Fork Grapple 17Material Bucket 18Material Bucket Grapple 18High Capacity HD Bucket 19Bolt On Cutting Edges 19Land Leveler 20
Snow removalSand Spreader 21Snow Bucket 21
Off-Road Dump trailers Off-Road Dump Trailers 22-23
Towing & lifting Pallet Forks 24Fork Extensions 24Fork Hitch Mover 253 PT. Gooseneck Tow Bar 25Equipment Movers 25Telescoping Boom 26
Quick-Tach plates & adapters Quick-Tach Plates 27-28Quick-Tach Adapters 293PT-QTP 303PT-PTO 30
WARRANTYLimited Warranty & Terms 31
new
new
new
833.352.3477 42739 County Road 184 • Sauk Centre, MN 56378 32 3
What sets Messer apart?2 year Limited Warranty
Great designs We research, design and test all of the products we build—from unique, custom-built prototypes to standard farm equipment. We’re always looking for ways to improve the products we manufacture and give you the best value for your hard-earned dollars. With an engineer and draftsman a part of our talented design staff, our designs will give you maximum performance right from the start. You’ll get a higher net lift capacity; tough tensile strength in strategic, high-stress areas; and smart, forward-thinking designs that don’t hold moisture or collect excess debris. Quality materialsTo get the best product, we start with the best steel at the right thickness. Your equipment is built tough, but doesn’t have to work harder than it should.
Fine craftsmanshipNothing takes the place of our experienced craftsmanship. We take the time to assemble and weld our products by hand, including rounding off sharp corners, making sure everything lines up, and ensuring the surface is clean, sandblasted and ready for powder coating. Long-lasting resultsWe prime and powder coat each product for a durable, corrosion-resistant finish that keeps showing up strong season after season. The process is also environmentally-friendly. Guaranteed functionBefore our hydraulic products leave the shop, they’re pressure tested with oil to make sure hoses are routed properly and they’re free of leaks. Then, they’re shipped complete with couplers and wet with oil so you can get right to work.
320.352.3477 | 833.352.3477
Farm Rated Quality at Realistic prices
42739 County Road 184 • Sauk Centre, MN 563784
Mes
serR
epai
r.co
mB
ALE
HA
ND
LIN
G
SPECS 5’ 3-TINE 5’ 4-TINE 5’ 3-TINE HD 5 1/2’ 4-TINE 5 1/2’ 5-TINE 6’ 4-TINE HD 6’ 4-TINE HD HIGH BACK
Model # SBF60000332 CBF60149332 SBF60000336HD SBF66000432 CBF66149432 SBF72000436HD SBF72000436HD45
Overall Width x Height 60” x 22” 66” x 22” 72” x 22” 72” x 48”
Top Tines/ Usable Tine Length NA 1 at 44” NA NA 1 at 44” NA
Top Tine Diameter/ Load Rating (lbs) NA 1.75”/2700 NA NA 1.75”/2700 NA
Bottom Tines/ Usable Tine Length 3 at 27” 3 at 31” 4 at 27” 4 at 31”
Bottom Tine Diameter/ Load Rating (lbs) 1.375”/1350 1.75”/2700 1.375”/1350 1.75”/2700
Tine Center to Center 29” 21” 23”
Approximate Weight (lbs) 175 210 190 225 250 310
SQUARE & COMBO BALE FORKS
• All tines are forged and tapered for strength and ease of use• Easily remove tines by removing a nut on the back• 18° Quick-Tach angle to prevent tire damage• Custom spear frames available to special order
2-TINE 2-TINE HD 3-TINE 3-TINE HD
Model # RBS45000249 RBS45000249HD RBS45149224 RBS45149224HD
Overall Width x Height 51” x 21” 45” x 21”
Top Tines/ Usable Tine Length NA 1 at 44” 1 at 42”
Top Tine Diameter/ Load Rating (lbs) NA 1.75”/2700 2”/4500
Bottom Tines/ Usable Tine Length 2 at 44” 2 at 42” 2 at 19”
Bottom Tine Diameter/ Load Rating (lbs) 1.75”/2700 2”/4500 1.375”/1350
Tine Center to Center 42”
Approximate Weight (lbs) 215 225 185 195
ROUND BALE SPEARS
SPECS
320.352.3477 | 833.352.3477 5
SPECS 5’ 3-TINE 5’ 4-TINE 5’ 3-TINE HD 5 1/2’ 4-TINE 5 1/2’ 5-TINE 6’ 4-TINE HD 6’ 4-TINE HD HIGH BACK
Model # SBF60000332 CBF60149332 SBF60000336HD SBF66000432 CBF66149432 SBF72000436HD SBF72000436HD45
Overall Width x Height 60” x 22” 66” x 22” 72” x 22” 72” x 48”
Top Tines/ Usable Tine Length NA 1 at 44” NA NA 1 at 44” NA
Top Tine Diameter/ Load Rating (lbs) NA 1.75”/2700 NA NA 1.75”/2700 NA
Bottom Tines/ Usable Tine Length 3 at 27” 3 at 31” 4 at 27” 4 at 31”
Bottom Tine Diameter/ Load Rating (lbs) 1.375”/1350 1.75”/2700 1.375”/1350 1.75”/2700
Tine Center to Center 29” 21” 23”
Approximate Weight (lbs) 175 210 190 225 250 310
BA
LE H
AN
DLIN
G
SPECS Model # Overall Length/Usable Length
Approximate Weight (lbs) Used With
2 PC. SELF STORING
UPRIGHTS 24”2BS24 30”/24” 30
Bale Spear
Frame
(all models)
1 PC. ADJUSTABLE
HD2BAHD 36”/24” 62
2 PC. 3RD BALE
EXTENSION HD
3BRHD 36”/30” 28
2BS24
OR
2BAHD2 PC. 4TH
BALE EXTENSION
HD
4BRHD 74”/62” 55
BALE SPEAR EXTENSIONS
42739 County Road 184 • Sauk Centre, MN 563786
Mes
serR
epai
r.co
mB
ALE
HA
ND
LIN
GReplacement SHW German BALE SPEARS
SPECS
Model #Overall/Usable Length
Diameter/Load Rating (lbs)
Weight (lbs)
CON-1-24 24”/19” 1.375”/1,350 7
CON-1-32 32”/27” 1.375”/1,350 8
CON-1-39 39”/34” 1.375”/1,350 8
CON-1-43 43”/38” 1.375”/1,350 9
CON-1-49 49”/44” 1.375”/1,350 10
CON-1 SLEEVE 4.75” 1.75” 3
CON-2-32 32”/27” 1.75”/2,700 15
CON-2-36 36”/31” 1.75”/2,700 16
CON-2-39 39”/34” 1.75”/2,700 16
CON-2-43 43”/38” 1.75”/2,700 18
CON-2-49 49”/44” 1.75”/2,700 22
CON-2-55 55”/50” 1.75”/2,700 24
CON-2 SLEEVE 4.75” 2.19” 3
CON-3-49 49”/42” 2”/4,500 28
CON-3 SLEEVE 6.5” 2.5” 4
LOAD RATING 24” OUT FROM SLEEVE
FORKLIFT MOUNTED BALE SPEAR
SPECS
Model # FL2-CL2 FL2-CL3 FL3-CL2 FL3-CL3
Overall Height 21” 25” 21” 25”
Rail Spacing 16” 20” 16” 20”
Approximate Weight (lbs) 31 38 35 43
• Includes a sleeve, tines purchased separately (see above)• Easily attaches to rail style Pallet Fork or Fork Lift carriage• Convert your pallet fork into a bale spear
CO
N 1
CO
N 2
CO
N 3
BALE SQUEEZER
SPECS
Model # BS96
Overall Width Closed 48”
Overall Height x Length 35” x 51”
Minimum Jaw Opening 10”
Maximum Jaw Opening 95”
Approximate Weight (lbs) 590
• 3 1/2” Bore x 14” stroke, 3500 psi cylinder for extreme pressure clamping
• Compact frame design with no sharp corners or edges to damage bales
• 4 heavy duty springs on each side control sway and ensure paddles stay centered
• All pivots are greasable
• Unique paddle design efficiently grabs up to 6’ diameter round bales and up to 7’ long square bales
BA
LE H
AN
DLIN
G
UP TO 6’ ROUND BALES
UP TO 7’ SQUARE BALES
320.352.3477 | 833.352.3477 7
Mes
serR
epai
r.co
mD
AIR
Y
STALL PLOWBEDDING EXTRACTOR
Tough enough for the commercial dairymAn
SAVE TIME AND MONEY!Lower somatic cell and bacteria count by removing
contaminated bedding every 6 months
THREE GOOD REASONS TO OWN AN MRF STALL PLOW VS. AUGER STYLE EXTRACTOR:
1. PERFORMANCE - Cleans over 2X more stalls per hour = less labor cost and time that cows are displaced from their beds.
2. HYGIENIC - Scrapes cleaner and removes more contaminated bedding.
3. COST EFFECTIVE - Quick ROI as plow has no moving parts to maintain and costs 2/3 less.
42739 County Road 184 • Sauk Centre, MN 563788
320.352.3477 | 833.352.3477 9
DA
IRY
9
QUICKLY CLEANS STALLSIN 3 EASY STEPS
• Hydraulic telescoping arm is greaseable to allow 8” of smooth adjustment while plowing
• 24” of manual in and out arm adjustment to find the perfect setting for any skid steer
• Abrasion resistant (AR200) steel blade designed to remove 24” of material with depths of
6 to 8 inches
• Plow angle infinitely adjusts from 5 to 60 degrees with 35 degrees of pitch adjustment
• Single pass removal of material capable at speeds in excess of 5 mph
SPECS QUICK TACH 3 POINT
Model # SP8X24 SP8X243PT
Overall Depth 41”
Overall Width (Arm Collapsed) x Height 85” x 30”
Approximate Weight (lbs) 510 460
1ST PASS 2ND PASS (OPTIONAL) CLEAN UP
24”
8”
GUTTER WIDTH & DEPTH
SP8X24 SP8X243PT
42739 County Road 184 • Sauk Centre, MN 5637810
Mes
serR
epai
r.co
m
42739 County Road 184 • Sauk Centre, MN 5637810
DA
IRY
FEED PUSHER
SPECS 1.5” 2” 1.5” 2”
Model # FP8X1.5 FP8X2 FPV8X1.5 FPV8X2
Angle Range of Adjustment 18º - 97º 53º - 63º
Dimensions @ 60º(LxWxH) 85”x89”x25” 84”x108”x25”
Approximate Weight (lbs) 645 710 975 1,060
• 3/8” Pivoting quick tach, with grease zerks, greatly increases rubber life
• Maximum performance is guaranteed with our infinitely adjustable angle
• 8’ long blade constructed from 5/16” material
• Reversible rubber edge with up to 6” of wear
• Long lasting ULTRA grade rubber is more flexible and can withstand temps as low as –30° F
Tough enough for the commercial dairymAn
Model # Weight (lbs)
FP1.5RUBBER Replacement ULTRA 1.5” reversible rubber edge 65
FP2RUBBER Replacement ULTRA 2” reversible rubber edge 85
FPV1.5-KIT Kit to convert single pusher to V pusher 330
FPV2-KIT Kit to convert single pusher to V pusher 350
OPTIONS Replacement Rubber Kit to convert to V pusher
320.352.3477 | 833.352.3477 11
DA
IRY
• Adjustable grooming angle to slope bedding in stalls• 2” bore, 3500 psi cylinder• 1/4” thick wall tubing for frame work• All pivots are greaseable• Bolt-on bidirectional teeth made out of ½” abrasion resistant (AR400) steel• 7 3/4” center to center spacing of teeth• Includes abrasion resistant (AR400) curb wear pad
FREESTALL GROOMER
1
1
2
2
3
3
4
4
A A
B B
DRAWNmrfhpCHECKED
QA
MFG
APPROVED
1/11/2019
DESCRIPTION
FSG 3-17 Main Asm.
SIZE
BSCALE
DWG NO
07640 - Angle AdjustmentREV
SHEET 1 OF 2
WEIGHTN/A
9 °
SPECS QUICK TACH 3 POINT
Model # FSG FSG3PT
Overall Depth 35”
Overall Width x Height (lowered) 128”x21” 129”x 34”
Overall Width x Height (raised) 48”x84”
Number of Teeth 8
Length of Teeth 4”
Approximate Weight (lbs) 450 430
42739 County Road 184 • Sauk Centre, MN 5637812
Mes
serR
epai
r.co
m
42739 County Road 184 • Sauk Centre, MN 5637812
Replacement Kit
DA
IRY
MANURE SCRAPER
SPECS 6’ 7’ 8’ 10’
Model # MS72 MS84 MS96 MS120
Overall Length x Width x Height 57” x 72” x 31” 63” x 84” x 31” 73” x 96” x 31” 81” x 118” x 31”
Approximate Weight (lbs) 700 890 1025 1350
• Frame is constructed from 3/8” steel and powder coated for long life
• Safe and convenient step through design
• Frame is designed to last multiple tire changes
• Back scraper is standard for cleanout of material
• Chain bolt is recessed
OPTIONS
Model # Weight (lbs)
MS72-KITReplacement rubber tire & back
scraper kit for 6’ manure scraper
395
MS84-KITReplacement rubber tire & back
scraper kit for 7’ manure scraper
560
MS96-KITReplacement rubber tire & back
scraper kit for 8’ manure scraper
665
MS120-KITReplacement rubber tire & back
scraper kit for 10’ manure scraper
890
320.352.3477 | 833.352.3477 13
WOOD SPLITTER
• The bolt together design allows users to assemble it to one of 2 positions. Whether trimming or shearing trees, cutting logs to length, or just splitting wood, this one attachment can be configured to do it all!• 10” tall blade is made out of 1” thick high strength steel
• 5” x 36” - 3,500 psi welded cylinder (includes guard)
• Can be set up boom out to prune limbs 16’ high
• Works with standard or high flow
• Recommended for machines with a rated operated capacity of at least 1,500 lbs.
SPECS BOOM OUT SIDEWAYS
Model # WS5X36
Overall Length/Depth 106” 27”
Overall Width x Height 45” x 23” 99” x 23”
Maximum Throat Opening 36”
Cylinder Push Force (at 3,000 psi) 30 Tons
Approximate Weight (lbs) 985
TREE SHEAR
13
OPTIONS Model # Weight (lbs)
Wood Splitter Tree Catcher WSTC5X36 115
Replacement Cross Cut Blades (Includes bolts) WS5X36CC 14
Shearing with optional tree catcher Prune limbs up to 8”Splitting with cross cut blades (included)
Optional Tree Catcher
Cross Cut Blades (included)
BOOM OUT SIDEWAYSUNASSEMBLED
WO
OD
SPLIT
TING
& T
REE H
AN
DLIN
G
42739 County Road 184 • Sauk Centre, MN 5637814
Mes
serR
epai
r.co
m
SPECS
Model # TP8X14
Overall Width x Height 45” x 23”
Overall Length 45”
Maximum Tree Diameter 8”
Maximum Jaw Opening 14”
Approximate Weight (lbs) 330
SPECS
Model # SB60A
Overall Width x Height 48” x 21”
Overall Length 60.5”
Bucket width at cut edge 12”
Bucket width at mounting plate 26”
Approximate Weight (lbs) 400
TREE & POST PULLER
STUMP BUCKET
• Easily clear trees & fence lines• Effectively removes trees up to 8” depending on tree species, machine size, and soil type/moisture• Teeth made of 1/2” hardened steel• Comes standard with base end cylinder guard
WO
OD
SPLI
TTI
NG
& T
REE H
AN
DLI
NG
• Constructed out of 1/2” material
• Serrated teeth on top edge of bucket for better gripping power
• 3/4” x 8” cut edge with 3 replaceable digger teeth
• Solid welds inside and out for increased strength
• Curved bottom for better digging leverage & break-out force
320.352.3477 | 833.352.3477 15
SPECS
Model # TS36 TS48
Overall Width x Height 45” x 20” 48” x 27”
Overall Length 39” 48”
Approximate Weight (lbs) 235 375
TREE SCOOP
• Turns a skid steer into an economical tree, bush, and perennial mover
• Entire unit made of 3/8” plate steel• Sharpened angle cutting blade for
easy digging
SPECS 72” 78” 85”
Model # BG72 BG78 BG85
Overall Width x Height 72” x 30” 79” x 30” 85” x 30”
Overall Depth 44”
Thickness of Teeth 1/2” Grade 50 (30% stronger)
Spacing Between Teeth 6”
Grapple Jaw Opening 42”
Cylinders/Cylinder Size2 at 2”x 8” 3500 psi welded cross
tube
Approximate Weight (lbs) 755 790 815
BRUSH & ROOT GRAPPLE
• Easily handles logs, roots, stumps, and brush
• Teeth are connected to one another for added strength
• Dual grapple hooks that operate independently, made from 1/2” Grade 50 (30% stronger)
• All pivots are greasable
• Comes standard with base end cylinder guards
OPTIONS Model # Weight
Bolt On Side Kit RBS-KIT 52
Rod End Guard Kit RG-WCT-KIT 18
WO
OD
SPLIT
TING
& T
REE H
AN
DLIN
G
RBS-KIT RG-WCT-KIT
42739 County Road 184 • Sauk Centre, MN 5637816
Mes
serR
epai
r.co
mM
ATER
IAL
HA
ND
LIN
G
ROCK BUCKET GRAPPLE
SPECS 68” 75” 82” 88”
Model # RBG68 RBG75 RBG82 RBG88
Overall Width x Height 69” x 30” 75” x 30” 82” x 30” 89” x 30”
Overall Depth 42”
Thickness of Teeth 3/8” Grade 50 (30% stronger)
Spacing Between Teeth 3”
Grapple Jaw Opening 42”
Cylinders/Cylinder Size 2 at 2”x 8” - 3500 psi welded crosstube
Approximate Weight (lbs) 875 935 980 1025
• Includes all features of rock buckets above• Dual grapple hooks that operate independently, made from 1/2” grade 50 plate (30% stronger)• Comes standard with base end cylinder guards• Removable bolt on sides allow for extra capacity (included)
• Includes a flat bar on the rear to allow this attachment to double as a land leveler• Easily pick up rocks and leave the dirt in the field• Features a rock dam and tooth notch to hold back rocks while digging• Excellent high visibility design• Teeth are connected to one another via 3/4” x 2” flat for added strength• Abrasion resistant (AR400) steel cutting edge
ROCK BUCKET
SPECS 48” 61” 68” 75” 82” 88”
Model # RB48 RB61 RB68 RB75 RB82 RB88
Overall Width x Height 48” x 22” 62” x 22” 69” x 22” 75” x 22” 82” x 22” 89” x 22”
Overall Depth 42”
Thickness of Teeth 3/8” Grade 50 (30% stronger)
Spacing Between Teeth 3”
Approximate Weight (lbs) 430 530 580 630 680 730
OPTIONS Model # Weight (lbs)
Rod End Cylinder Guard Kit RG-WCT-KIT 18
320.352.3477 | 833.352.3477 17
MA
TER
IAL H
AN
DLIN
GManure Fork
SPECS 60” 68” 75” 84”
Model # MF60 MF68 MF75 MF84
Overall Width x Height 60” x 25” 68” x 25” 75” x 25” 84” x 25”
Overall Depth 38”
Number of Tines 8 9 10 11
Tines Center to Center 8”
Approximate Weight (lbs) 380 415 450 485
• 3/16” steel formed back with 3” x 3” tubing on top edge• Removable 36” long tines made from 1.75” spring steel in tapered sleeve• Front support plate strengthens leading edge of bucket with a self cleaning design
MANURE FORK GRAPPLE
SPECS 60” 68” 75” 84”
Model # MFG60 MFG68 MFG75 MFG84
Overall Width x Height 60” x 31” 68” x 31” 75” x 31” 84” x 31”
Overall Depth 38”
Grapple Jaw Opening 42”
Number of Tines 8 9 10 11
Tines Center to Center 8”
Cylinders/Cylinder Size 2 at 2” x 8” 3500 psi welded cross tube
Approximate Weight (lbs) 700 750 795 840
• Includes all features of manure forks above• 1/4” steel formed back with 3” x 3” tubing on top edge• Dual grapple hooks that operate independently, made from 1/2” Grade 50 (30% stronger)• Comes standard with base end cylinder guards
OPTIONS Model # Weight (lbs)
Rod End Cylinder Guard Kit RG-WCT-KIT 18
42739 County Road 184 • Sauk Centre, MN 5637818
Mes
serR
epai
r.co
mM
ATER
IAL
HA
ND
LIN
G
• All Light Duty models feature channel top edge and 2 runners underneath• All Standard Duty models feature enclosed top edge for strength and four runners underneath• All Heavy Duty models include standard duty features plus inside vertical supports• Optional double bevel bolt-on edge, holes are punched in if ordered with bucket (see page 19)
MATERIAL BUCKET
MATERIAL BUCKET GRAPPLE
SPECS 66” 72” 78” 84”
Model # MBG66 MBG72 MBG78 MBG84
Overall Width x Height 67” x 31” 73” x 31” 79” x 31” 85” x 31”
Overall Depth 38”
Grapple Jaw Opening 44”
Cylinders/Cylinder Size 2 at 2”x 8” 3500 psi welded cross tube
Approximate Weight (lbs) 925 960 1000 1035
Capacity/Struck (cubic ft) 15.9 17.3 18.8 20.2
Capacity/Heaped (cubic ft) 19.1 20.8 22.6 24.2
• Includes all features of Heavy Duty buckets above • Dual grapple hooks that operate independently,
made from 1/2” grade 50 plate (30% stronger)• Removable bolt-on sides allow for extra capacity (included)• Comes standard with cylinder guards• Optional double bevel bolt-on edge, holes are
punched in if ordered with bucket (see page 19)
OPTIONS Model #Weight
(lbs)
Rod End Cylinder Guard Kit RG-WCT-KIT 18
Replaceable Weld-On Tooth Kit 96151 6
Machine Rating CapacityLight Duty 2000 lbs. or less
Standard Duty 3000 lbs. or lessHeavy Duty 3000 lbs. +
SPECS 60” 66” 72” 78” 84”Light Duty 3/16” Model # MB60LD MB66LD MB72LD NA Light Duty Weight 330 350 365 NA Standard Duty 3/16”Model # MB60SD MB66SD MB72SD MB78SD NA Standard Duty Weight 420 445 470 485 NAHeavy Duty 1/4” Model # NA MB66HD MB72HD MB78HD MB84HD Heavy Duty Weight NA 585 610 645 685Overall Width x Height 60” x 22” 66” x 22” 72” x 22” 78” x 22” 84” x 22”Overall Depth 38” Capacity/Struck (cubic ft) 14.5 15.9 17.3 18.8 20.2Capacity/Heaped (cubic ft) 17.4 19.1 20.8 22.6 24.2
96151
RG-WCT-KIT
320.352.3477 | 833.352.3477 19
5/8 X 8 BOLT ONCUTTING EDGES
Model # Weight (lbs)
5’ Double Bevel-10 HOLES 60BOCE 805.5’ Double Bevel-11 HOLES 66BOCE 85 6’ Double Bevel-12 HOLES 72BOCE 95 7’ Double Bevel-14 HOLES 84BOCE 115 8’ Double Bevel-16 HOLES 96BOCE 120 8.5’ Double Bevel-17 HOLES 102BOCE 135 9’ Double Bevel-18 HOLES 108BOCE 145 10’ Double Bevel-20 HOLES 120BOCE 160
MA
TER
IAL H
AN
DLIN
G
• 5/8” hole diameter & 6” center to center spacing
• Hardware included
• Heat treated high carbon steel
HIGH CAPACITY HD BUCKET
72” 84” 96” 108” 120” Model # HC72HD HC84HD HC96HD HC108HD HC120HDOverall Width x Height 74” x 39” 86” x 39” 96” x 39” 108” x 39” 120” x 39”Overall Depth 48”Approximate Weight (lbs) 1075 1180 1280 1435 1550
Capacity/Struck (cubic ft) 36.8 43.1 48.5 55.3 61.2Capacity/Heaped (cubic ft) 46.9 54.8 61.8 66.3 77.3
SPECS
• Replaceable wear parts included - cutting edge and front corners
• Abrasion resistant steel - outside bottom wear strips
• Crack resistant frame - large beam and post structure made of 1/4” steel on rear of bucket
Commercial duty, built heavy for everyday use
SPECS
42739 County Road 184 • Sauk Centre, MN 5637820
Mes
serR
epai
r.co
mM
ATER
IAL
HA
ND
LIN
G
Land Leveler
72” 84”
Model # LL72 LL84
Dimensions (LxWxH) 72” x 47” x 23” 84” x 47” x 23”
Approximate Weight (lbs) 550 565
SPECS
OPTIONS
Model #
LLS72-KIT 72” Hydraulic Scarifier bi-directional teeth that dig 3” deep 115 lbs
LLG72-KIT 72” Bolt on grate kit, allows sifting and hauling of dirt 63 lbs
LLS84-KIT 84” Hydraulic Scarifier bi-directional teeth that dig 3” deep 125 lbs
LLG84-KIT 84” Bolt on grate kit, allows sifting and hauling of dirt 75 lbs
• Features a 3/4” cutting edge on the front and back that allow for cutting & grading in both directions• Weld on edges have holes for optional bolt-on cut edge• Top bucket hooks allow you to carry your dirt bucket with while grading• Features removable grate for sifting and scooping material and rock• High visibility design works great for grading, back dragging or peeling sod• Scarifier teeth and shanks made with AR400 steel
Shown with optional grate kit Shown with optional scarifier
OPTIONS
Model #
LLS72-KIT 72” Hydraulic Scarifier bi-directional teeth that dig 3” deep 115 lbs
LLG72-KIT 72” Bolt on grate kit, allows sifting and hauling of dirt 63 lbs
LLS84-KIT 84” Hydraulic Scarifier bi-directional teeth that dig 3” deep 125 lbs
LLG84-KIT 84” Bolt on grate kit, allows sifting and hauling of dirt 75 lbs
SNOW BUCKET
• Closed top edge for strength heavy duty 3/16” material• All snow buckets feature 20° roll back & vertical bracing• Optional double bevel bolt-on edge (See page 19), holes are
punched in if ordered with bucket
SPECS 6’ 7’ 8’ 8.5’ 9’ 10’
Model # Solid Back SB72SD SB84SD SB96SD NA NA NA
Model # Mesh Back SB72MB SB84MB SB96MB SB102MB SB108MB SB120MB
Overall Width x Height 72” x 31” 84” x 31” 96” x 31” 102” x 31” 108” x 31” 120” x 31”
Overall Depth 41”
SD Approx. Weight (lbs) 610 645 700 NA
MB Approx. Weight (lbs) 635 660 730 820 850 870
Capacity/Struck (cubic ft) 25.5 30 34 36 38 42.5
Capacity/Heaped (cubic ft) 30.6 36 40.8 43.2 45.6 51
Sand spreader
• Variable speed flow control with check valve to prevent reverse operation
• 18” diameter pan spreads up to 35’
• 3 ft square hopper features 4 adjustable doors to control material flow
• Low profile self loading hopper features a cutting edge for easy loading
• Features rotating agitator to ensure all material is cleaned out of hopper
• Spreads almost anything - sand, grass, seed, fertilizer, salt, lime, etc.
SPECS
Model # SS10
Overall Width x Height 45” x 39”
Overall Depth 39”
Cubic Feet 10
Spread in Feet 5-35’
Approximate Weight (lbs) 590
21
SN
OW
REM
OV
AL
320.352.3477 | 833.352.3477
42739 County Road 184 • Sauk Centre, MN 5637822
Mes
serR
epai
r.co
mO
FF-
RO
AD
DU
MP T
RA
ILER
SOFF-ROAD DUMP TRAILERS
RTS6X12RTS4X8 RTF6X12
Model # RTS4X8 RTF6X12 RTS6X12
Overall Width x Height 73” (6’ 1”) x 38” 80” (6’ 8”) x 45 104” (8’ 8”) x 45”
Overall Length 147” (12’ 3”) 225” (18’ 9”) 227” (18’ 11”)
Height of Box Sides 12” 16”
Bed Floor Height 26” 29”
Floor Thickness 10GA 7GA (3/16”)
Sidewall Thickness 12GA 10GA
Width of Box 48” (4’) 72” (6’)
Length of Box 96” (8’) 144” (12’)
Empty Trailer Weight (lbs) 1,150 2,950 3,250
Tongue Weight, Empty/Full (rated cap. lbs) 150/720 320/1,200 350/1,250
Axle Configuration Single Rigid Heavy Duty Walking Tandem
Rating per Hub (lbs) Number of bolts 5,000/6 Bolt
Rated Payload Capacity (lbs) 6,000 14,000
Lifting Mechanism Single Cylinder Single Scissor Hoist
Hoist Dump Capacity in lbs (tons) 10,000/5T 21,800/10.9T
Tire Center to Center 62” 68” 92”
Tire Size 265/75/16 10 ply used truck tire
Jack 5K Top Wind
Ramp Option NA RTS6RK (optional)
Tailgate Style Folding Tool free removable gravel plate
Pre-wired w/LED signal lights Optional
Dump Angle 48º 45º
Wheel Track Follows crop rows 30” 22” & 30”
SPECS
42739 County Road 184 • Sauk Centre, MN 5637822
Mes
serR
epai
r.co
m
320.352.3477 | 833.352.3477 23
• All pivots are serviceable and greaseable• Removable axles, tandems, and hoist• Extended length hitch for use with tractors with dual wheels, 6x12 & 8x16 models• Double acting heavy duty welded hydraulic cylinder scissor hoist for long life• Comes standard with male pioneer ends
OPTIONS Model # Weight
Double Acting 6 quart hydraulic pump(battery not included)
RT-6EHP 185
Light Plug Adapter - 7 pin blade round male to 7 pin round female
ADP7B-7P 1
Magnetic Light Kit VLC2120 5
OFF-R
OA
D D
UM
P T
RA
ILER
S
RTP8X16RTM8X16
Model # RTM8X16 RTP8X16
Overall Width x Height 104” (8’ 8”) x 50” 104” (8’ 8”) x 65”
Overall Length 275” (22’ 11”) 281” (23’ 5”)
Height of Box Sides RTM8X16RS (Optional) 12” Removable 18” Removable
Bed Floor Height 38” 47”
Floor Thickness 7GA (3/16”) 1/4” (AR400)
Sidewall Thickness 10GA 7GA (3/16”)
Width of Box 96” (8’)
Length of Box 192” (16’)
Empty Trailer Weight (lbs) 4,700 7,750
Tongue Weight, Empty/Full (rated cap. lbs) 490/1,120 770/3,200
Axle Configuration Heavy Duty Walking Tandem
Rating per Hub (lbs) Number of bolts 5,050/8 Bolt 12,000/10 Bolt
Rated Payload Capacity (lbs) 16,000 30,000
Lifting Mechanism Single Scissor Hoist Double Scissor Hoist
Hoist Dump Capacity in lbs (tons) 19,000/9.5T 38,000/19T
Tire Center to Center 73” 76”
Tire Size12.5L-15 - new 12 ply flotation
445/50/22.5 used truck tires
Jack 5K Top Wind 7K Side Wind
Ramp Option RTM7RK (Optional) NA
Tailgate Style Tool free removable gravel plate
Pre-wired w/LED signal lights Standard
Dump Angle 40º
Wheel Track Follows crop rows NA
SPECS
RT-6EHP
VLC2120ADP7B-7P
320.352.3477 | 833.352.3477 23
42739 County Road 184 • Sauk Centre, MN 5637824
Mes
serR
epai
r.co
mTO
WIN
G &
LIF
TIN
G
Model # Overall Width x Height
Usable Tine
Length
Thickness of Tines
Approximate Weight (lbs)
Load Rating Capacity
(lbs)**
PF22KS45 45” x 26” N/A 952200
PF22K42S45 45” x 29” 42” 1 3/16” 225
PF40KWT45 45” x 34” N/A 1354,000
PF40K48WT45 45” x 37” 48” 1 3/8” 330
PF55KWT45 45” x 34” N/A 190
5,500PF55K48WT45 45” x 37” 48” 1 1/2” 410
PF55KWT54 54” x 34” N/A 225
PF55K48WT54 54” x 37” 48” 1 1/2” 440
Model # Dimensions Weight (lbs)
FORKEXT72Recommended for 48” tines
75” x 6” x 3”104/
pair
FORKEXT96Recommended for 60” tines
98” x 6” x 3”138/
pair
• Standard class II forks (16” rail spacing)
• Excellent visibility of tines
• Walk through* eases entry and exit of machine, works well with swing out cab doors
• Brickguard is flush with front of tine uprights for better load support*
* Does not apply to 2,200 lb. pallet fork
• Made out of 1/4” steel
• Slip on feature, no bolts or wrenches
• Fits tines up to 2” thick & 5” wide
+Fork extensions should never be considered load bearing. They are designed to improve stability and balance of load.
SPECS
PALLET FORKWALK-THROUGH BRICKGUARD
** Load Rating Capacity per pair at 24” from carriage frame
OPTIONS Model # Weight (lbs)
Load Rating Capacity ( lbs.)**
Class II - 3 x 42 x 1 3/16” PF Tine PF22K42TINE 73 2200
Class II - 4 x 48 x 1 3/8” PF Tine PF40K48TINE 85 4000
Class II - 4 x 42 x 1 1/2” PF Tine PF55K42TINE 895500
Class II - 4 x 48 x 1 1/2” PF Tine PF55K48TINE 107
Class II - 4 x 48 x 1 3/4” PF Tine PF62K48TINE 121
6200Class II - 4 x 60 x 1 3/4” PF Tine PF62K60TINE 145
Class II - 4 x 72 x 1 3/4” PF Tine PF62K72TINE 168
Side Step (fits all models) 07944 2 NA
FORK EXTENSIONSSPECS
PF22K42S45 PF40K48WT45 PF55K48WT45 PF55K48WT54
07944
Pallet Fork Tine
320.352.3477 | 833.352.3477 25
Model # Dimensions Weight (lbs)
FORKHITCH2 29” x 15” x 6” 50
• Forklift mounted, 2” receiver hitch• Slips over 2 pallet fork tines & chains to brickguard• Fits tines up to 1 3/4” x 5” x 48” standard taper
OPTIONS Model # Weight (Lbs)
Category II Pin Kit - 1 1/8” - under 100/120 HP 3PTPKII 7
Category III Pin Kit - 1 7/16” - over 100/120 HP 3PTPKIII 12
Light Plug Adapter - 7 pin round male to 7 blade round female ADP7P-7B 1
OPTIONS Model # Weight (lbs)
QTEM2 ONLY - Optional Ball Hitch 3209-C 3
3 PT. GOOSENECK TOW BAR
FORK HITCH MOVER
• One model will work on Cat. II & Cat III narrow or wide• 2-5/16” Heavy duty forged ball• Requires a pin kit (sold separately)• Includes safety chain hooks
SPECS STANDARD PREMIUM
Model # QTEM QTEM2
Overall Width x Height 45” x 18” 45” x 21”
Overall Length 17” 31”
Approximate Weight (lbs) 135 150
EQUIPMENT MOVER
• Built heavy duty to handle moving loaded wagons
• Storage for 2 extra receivers on upper outside corners
• QTEM2 features extended length of receiver allowing operator to view hitch from cab
SPECS CATEGORY II, III N, III W
Model # 3PTGTB
Overall Width x Height 46” x 23”
Overall Depth 20”
Rating–Gross Trailer Weight (lbs) 30,000
Rating–Trailer Tongue Weight (lbs) 10,000
Approximate Weight (lbs) 125
SPECS
TO
WIN
G &
LIFTIN
G
QTEM2
QTEM
3PTPKII
3PTPKIII
ADP7P-7B
42739 County Road 184 • Sauk Centre, MN 5637826
Mes
serR
epai
r.co
m
42739 County Road 184 • Sauk Centre, MN 5637826
TO
WIN
G &
LIF
TIN
G
Telescoping BOOM
SPECS
Model # TB8X21
Overall Width x Height 46” x 22”
Overall Length (Collapsed/Extended) 96” / 255”
Cylinders/Cylinder Size 2 at 2” x 48” - 3500 PSI trunnion mount
Approximate Weight (lbs) 650
• 3 Stage Extension: the first 2-48” stages provide 96” of hydraulic powered extension and the 3rd stage provides over 60” of manual extension with a spring loaded lock pin
• Accepts a standard 2 1/2” class 5 receiver hitch to allow flexibility for multiple hitch options
• 2 hitch storage holders on main body are included
• Lifting capacity: Depends on extension angle, length and machine operating capacity
• Recommended for use with machines having a Rated Operating Capacity (ROC) of more than 2000 lbs. but not to exceed 4000 lbs.
• Use the following chart to determine what the lifting capacity will be with this boom on your machine in various positions
MACHINE RATED OPERATING CAPACITY (ROC) 2000 2500 3000
Max Load Horizontal (Collapsed) 870 lbs 1180 lbs 1490 lbs
Max Load Horizontal (Fully Extended) 280 lbs 410 lbs 540 lbs
Max Load @ 70 deg Vertical (Collapsed) 2000 lbs 2500 lbs 3000 lbs
Max Load @ 70 deg Vertical (Fully Extended) 975 lbs 1290 lbs 1600 lbs
OPTIONS Model # Weight (lbs)
Teleboom D-Ring Hitch TB-DRH 2
Teleboom Roof Rake - 10’ long, 4’ wide, has 1-1/2” rubber on bottom side
TB-RR10 207Shown with
optional TB-DRHTB-RR10
320.352.3477 | 833.352.3477 2727
QU
ICK-T
ACH
PLA
TES &
AD
APTER
S
SPECS
Model # Description Weight (lbs)
DimensionsL x W x H
1/4QT1P1/4”
- 1 Piece QT Plate
45 45” x 19” x 3”
3/8QT1P3/8”
- 1 Piece QT Plate
65 45” x 19” x 3”
3/8QTFULLST3/8”
- Full Back QT Plate
100 45” x 19” x 3”
1/2QTFULLST1/2”
- Full back QT Plate
135 45” x 19” x 3”
MQTP
1/4” - Male QT plain make your own brackets
100 44” x 18” x 4”
GLOBAL TABS Tabs Only 14 6” x 5” x 3”
• All Quick-Tach plates feature a 1/2” thick top flange and are not painted
Quick-Tach Plates
42739 County Road 184 • Sauk Centre, MN 5637828
Mes
serR
epai
r.co
mQ
UIC
K-T
ACH
PLA
TES &
AD
APTER
S
GLOBAL2P1/2” - Tabs on Back Plates 2
piece46 45” x 21” x 4”
JD120-5002PJD 120-500
QT Plate Set, 2 piece
70 50” x 21” x 3”
JD240-2652PJD240-265 plate set, 2
piece40 47” x 18” x 3”
JD600-7002PJD600-700
QT Plate Set92 49” x 23” x 7”
3PT1P
3 point weld on bracket, fits Cat II &
Cat III narrow or
wide
67 46” x 22” x 6”
Quick-Tach Plates (Continued)
SPECS
Model # Description Weight (lbs)
DimensionsL x W x H
• All Quick-Tach plates feature a 1/2” thick top flange and are not painted
320.352.3477 | 833.352.3477 29
Quick Tach AdaptersQ
UIC
K-T
ACH
PLA
TES &
AD
APTER
S
• All Adapters are painted black.
SPECS
Model # Description Weight (lbs)
DimensionsL x W x H
MQTP-GLOBAL
MQTP-1/4” Global-1/2” - Male QT to Global Adapter
126 45” x 21” x 6”
MGLOBAL-QTP
Male Global to universal skid loader
adapter
185 46” x 22”x9”
MQTPJD120-500Male QT to JD120-500
Loaders125 50” x 21” x 5”
MQTP-JD145-158
Male QT - pins to JD 145, 146,
148 and 158 loaders
(pins not included)
155 45” x 19” x 9”
MQTP-JD240-265Male QT to JD240-265
loaders140 47” x 18” x 7”
MQTPJD600-700Male QT to JD600-700
Loaders 185 49” x 23” x 10”
MQTP-CHALMERS500
Male QT to Chalmers 500 Series
loader pin-on
(pins not included)
125 45” x 18” x 7”
MQTP-MASSEY/AGCO
Male QT to Massey/
AGCO loader
135 47” x 22” x 7”
MQTP-TV140Male QT to NH TV140, 145 & 6070
360 71” x 26” x 15”
42739 County Road 184 • Sauk Centre, MN 5637830
Mes
serR
epai
r.co
mQ
UIC
K-T
ACH
PLA
TES &
AD
APTER
S
3 Point to Quick-Tach Plate with hydraulic drive PTO
SPECS
Model # 3PT-PTO
Dimensions (LxWxH) 40” x 46” x 24”
Approximate Weight (lbs) 465
• Category II/III narrow 3 PT Quick Hitch to Female Quick Hitch Adapter with hydraulic drive 540 PTO• 15-24 GPM hydraulic flow recommended• Outputs 30 horse power at 24 GPM, 3,000 PSI• Includes anti-reversing relief valve protected hydraulic motor
3 Point to Quick-Tach Plate
SPECS
Model # 3PT-QTP
Dimensions (LxWxH) 13” x 47” x 23”
Approximate Weight (lbs) 240
• Male 3 PT to universal skid loader adapter• Allows use of Cat I, II, and III 3 PT attachments on a skid steer• Lower arms adjust from 18” out to 43” center to center• Assembly also includes a receiver hitch and hitch storage tubes
new Products Coming Soon• Hydraulic Sliding Pallet Fork
• Brush Mower
• Stump Bucket Grapple
• Snow Pusher
The following limited warranty, and terms and conditions of sale (the “Limited Warranty”) apply to all equipment, products, parts, and goods (any of the foregoing are referred to herein as “Equipment”) sold by Messer Repair & Fabricating, LLC (“Messer”):
1 COVERS ALL EQUIPMENT. Each purchase of Equipment by a purchaser is expressly made conditional on purchaser’s assent to the terms and conditions in this Limited Warranty.
2 LIMITED WARRANTY. Messer warrants that for a period of 24 months from the date of purchase, the Equipment will remain free from defects in material and workmanship under normal use and proper maintenance. Messer’s obligation under the warranty shall be limited to the repair or replacement (at Messer’s option) of the Equipment. Notwithstanding the foregoing, if the Equipment is used for commercial purposes or is rented or leased out by the purchaser, then, the foregoing warranty shall only be for a period of 180 days and not 24 months.
3 NO WARRANTY FOR EQUIPMENT COMPONENTS FROM THIRD PARTIES. Notwithstanding the limited warranty terms set forth above, MESSER OFFERS NO WARRANTY WHATSOEVER WITH RESPECT TO ANY COMPONENTS OF THE EQUIPMENT MADE OR PROVIDED TO MESSER BY OTHER MANUFACTURERS, PRODUCERS, OR SELLERS (the “Purchased Components”). The sole and exclusive warranty for each the Purchased Components shall be limited to the express written warranty with respect to the Purchased Component as provided by the manufacturer, producer, or seller of such Purchased Component. Messer’s responsibility and liability for the Purchased Components shall be limited to the assignment of the Purchased Components’ express written warranties applicable to the Purchased Components. Purchased Components include, without limitation, the following: axles, tires and rims; trailer hitch components and jacks; hydraulic pumps, motors, cylinders and components; and bales spears, pallet tines, and bucket teeth.
4 NO OTHER WARRANTIES. THE FOREGOING REPAIR AND REPLACEMENT OBLIGATIONS IN SECTION 2 ARE IN LIEU OF ALL OTHER WARRANTIES, LIABILITIES AND OBLIGATIONS, INCLUDING ALL WARRANTIES OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, EXPRESSED OR IMPLIED IN FACT OR BY LAW, AND STATE MESSER’S ENTIRE AND EXCLUSIVE LIABILITY AND PURCHASER’S EXCLUSIVE REMEDY FOR ANY CLAIM IN CONNECTION WITH THE SALE AND PURCHASE OF EQUIPMENT (AND ALL COMPONENTS THEREOF), THEIR DESIGN, SUITABILITY FOR USE, INSTALLATION OR OPERATIONS.
5 LOCATION OF WARRANTY REPAIRS. All warranty repairs pursuant to this Limited Warranty shall be made at Messer’s corporate manufacturing plant, or other location as determined by Messer, at its discretion. Purchaser shall be responsible for and pay for any transportation expenses necessary for Limited Warranty repairs.
6 LIMITED WARRANTY VOIDABLE. The limited warranty herein is void and deemed waived if (a) the proper registration form for the Limited Warranty, as supplied by Messer, is not completed in its entirety and returned to Messer within 45 days of the Equipment purchase; or (b) purchaser fails to give written notice to Messer of any alleged defect under the limited warranty herein within 20 days of its discovery; or (c) purchaser or parties other than Messer or its authorized representatives attempts to remedy or fix the alleged Equipment defects; or (d) purchaser has used the Equipment for purposes it was not intended to be used for; or (e) purchaser has not operated the Equipment in a manner consistent with Messer’s instructions for the Equipment; or (f) the Equipment has been modified, altered, abused, or misused; or (g) the Equipment has been damaged pursuant to accident, fire, flood, or other Act of God.
7 NO CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL MESSER BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, AND MESSER’S LIABILITY, UNDER NO CIRCUMSTANCES, WILL EXCEED THE PRICE PAID FOR THE EQUIPMENT FOR WHICH LIABILITY IS CLAIMED.
8 GOVERNING LAW. This contract shall be governed by the laws of the State of Minnesota.
9 ARBITRATION. Any controversy or claim arising out of or relating to the limited warranty provided herein, or any alleged breach thereof, shall be settled exclusively by arbitration in accordance with the Rules of the American Arbitration Association, and judgment upon the award rendered by the arbitrator may be entered in any court having jurisdiction thereof. The arbitration shall be conducted in Minneapolis, MN, by one arbitrator selected by Messer and Purchaser, or, if they cannot agree, the President of the American Arbitration Association.
LIMITED WARRANTY AND TERMS & CONDITIONS OF SALE
320.352.3477 | 833.352.3477 31
Sauk Centre
I-94
CR 184
BELTLINE RD
FAIRY LAKE RD
SINCLAIR LEWIS AVE
28
71
42739 CR 184 • Sauk Centre, MN 56378
Messer Repair & Fabricating LLC MesserRepair.com320.352.3477 | 833.352.3477
We’d love to hear from you!Have feedback on an existing product...or need help bringing a new product to life? Contact us today!
Distributed By:
100% Satisfaction Guaranteed Return PolicyAfter you purchase any product from Messer Repair & Fabricating, LLC, if you feel that it fails to live up to your expectations for any reason, return it to us within 30 days of the invoice date, and we will immediately refund you 100% if the purchase price.
PLEASE KEEP IN MIND THAT:• You will be responsible for return shipping costs
• For drop ship orders, a 20% restocking fee will apply.
CUSTOM ORDERSBecause they’re specifically tailored to your individual needs and are therefore not resellable, we’re unable to accept returns on custom-ordered items. We will however make every reasonable effort to resolve the issue to improve your satisfaction.