product catalog
TRANSCRIPT
Product Catalog2009-2010
®
??
Innovation Movement by MIS...
All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: Only a licensed dentist should use these products.
3.
© MIS Corporation. All Rights Reserved.
Contents.
Implant system. UNO
BIOCOM SEVEN
Surgical Instruments.Drills- Internal irrigation
Drills- ExternalCeramic DrillsTrephine Burs
Thread Forms/ Surgical Tools UNOSurgical Tools
Surgical Instruments
Kits. Advanced Surgical Instrument Kit
Drill Stopper KitsYeung Bone Harvest Kit
Crest Widener KitAbrahami Drill Guide Kit
Bone Compression KitUno Implant Surgical Kit
The Basic Kit/ The Organizer KitConvex Osteotome Set
Osteotome Set and Sinus Lift Osteotome Set
Prosthetic.Impression Coping
CPS- Complete Prosthetic SetReverse Abutment Kits
GBK- Gold Base KitPBK- Plastic Base Kit
Direct System- Screw retained reconstruction tableDirect System- Cemented reconstruction tableDirect System- Screw retained reconstruction
Direct System- Cemented reconstructionMulti Unit System
BarsBall Attachment System
Locator Attachments SystemWide Platform- Screw retained reconstruction table
Wide Platform- Cemented reconstruction tableWide Platform- Screw retained reconstruction
Wide Platform- Cemented reconstruction
Accessoies.Zircon Diamond Burr Set
Prosthetic InstrumentsAbutment Holding System Kit
4BONE4BONE 1cc/ 2cc and 4BONE RCM
MIS-MCU Control UnitThe Crown Set
Material Compositions
Index.
6-258-1112-1718-22
26-3528-29303132333435
36-5338-39404142-4344-4546-4748-49505152-53
54-7956-5758-5960-6162-6364-6566676869707172-7374-7576777879
8081828384-8586-8788-899091
92
4.
© MIS Corporation. All rights Reserved.
MIS, vision is to produce user-friendly implants
and superstructures that offer clinicians simple
and creative procedures and keep our customers
continuously smiling.
5.
6.6.
Biocom
Seven
Uno
7.
Implant system.
The wide range of MIS implant product lines provides a variety of clinical solutions
such as reconstruction of a single tooth, screw-retained or cemented fixed bridges
and overdentures. Furthermore, MIS implants can be used in any surgical and bone
augmentation procedures, from the simplest to the most intricate. All MIS implants
adhere to the highest international standards and have ISO, and CE approvals.
They are made of biocompatible medical grade titanium, and their surface is dual-
roughed by sand blasting and acid-etching procedures.
The MIS self-tapping Seven Implants are especially designed for implantation in a wide range of bone types and bone augmentation procedures. Their new geometric design includes dual threads, three spiral channels stemming from the apex, micro rings on the implants’ neck, and a changing thread thickness along the implant. All MIS Seven implants are supplied with a single use final drill for reducing the heat produced during drilling, resulting in improved osseointegration.
MIS BioCom Implants are titanium cylinder screw type implants that are designed for both two-stage and single stage procedures. They are self tapping with a unique wide thread design, and tapered threads on their apical part.
MIS UNO unique implants are specifically engineered for narrow ridges and tight spaces. The insertion of the UNO implant is a quick and simple one stage procedure. Due to their innovative geometries and advanced surface morphology these unique implants offer high initial stability. These versatile implants can be used to restore single crowns and anterior cemented bridges.
8.
8.
16mm13mm10mm 11.50mm
MO2-10300 MO2-11300 MO2-13300 MO2-16300
Ø 3mm
Ø 3.50mm
Ø 3mm
MO1-16300MO1-10300 MO1-11300
MO1-10350 MO1-11350 MO1-13350 MO1-16350
MO1-13300
Screw type implant range.
Type
Length
One piece implant
One piece implant
Screw type implant range.
One Piece implants
Narrow Two Piece implants
Narrow Two Piece implant
9.
9.
1200-1500
1.90 2
900-1200
2.40
700-900
3
15-25
MO1-10300
MO1-13300
MO1-11300
MO1-16300
Ø2.7mm
6.3mm
3
L
Uno screw type implants Ø 3mm One piece.
Ø3mmlength 10mm
Ø3mmlength 13mm
Ø3mmlength 11.50mm
Ø3mmlength 16mm
Dimensions
Titanium grade 5
Material DescriptionCatalog No.
Ø 3mm Implant Procedure
Drill Speed (RPM)
Diameter
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
Abutment Part:acid-etched
Implant Part:Sand Blasted and acid-etched
10.
1200-1500
1.90 2
900-1200
3
700-400
2.40
700-900
3.50
15-25
10.
MO1-10350
MO1-13350
MO1-11350
MO1-16350
Ø
2.7mm
6.3mm
3.50
L
Uno screw type implants Ø 3.50mm One piece.
Ø 3.50mm Implant Procedure
Drill Speed (RPM)
Diameter
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
Ø3.50mmlength 10mm
Ø3.50mmlength 13mm
Ø3.50mmlength 11.50mm
Ø3.50mmlength 16mm
Titanium grade 5
Dimensions Material DescriptionCatalog No.
Abutment Part:acid-etched
Implant Part:Sand Blasted and acid-etched
11.
11.
1200-1500
1.90 2
900-1200
2.40
700-900
3
15-25
L
2mm
MO2-10300
MO2-13300
MO2-11300
MO2-16300
Ø 3mm Implant Procedure
Drill Speed (RPM)
Diameter
Catalog No.
Ø 3mmlength 10mm
Ø 3mmlength 13mm
Ø 3mmlength 11.50mm
Ø 3mmlength 16mm
Dimensions
TitaniumGrade 5
Material Description
Uno screw type implants Ø 3mm Narrow.
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
Sand Blasted acid-etched
12.
12.
MF4-13330 MF4-16330
13mm8mm 16mm11.50mm10mm
MF4-10330
MF4-08375 MF4-10375 MF4-11375 MF4-13375 MF4-16375
MF4-08420 MF4-10420 MF4-11420 MF4-13420 MF4-16420
MF4-11330
Ø 3.30mm
Ø 4mm
Ø 5.5mm
Ø 5mm
Ø 6.3mm
Ø 3.75mm
Ø 4.20mm
Ø 5mm
MC1-00375
MF4-08500 MF4-10500 MF4-11500 MF4-13500 MF4-16500
MF4-08600 MF4-10600 MF4-11600 MF4-13600
MH-03375MH-04375MH-05375MH-06375
MH-53375MH-54375MH-55375MH-56375
MC1-00470
MH-W3500MH-W4500MH-W5500
3/4/5mm
3/4/5/6mm
3/4/5/6mm
3/4/5mmMH-W3630MH-W4630MH-W5630
Ø 6mm
Screw type implant range.
Type
Length
Screw type implant standard platform
Wide
Standard
Screw type implant standard platform
Screw type implant standard platform
Screw type implant wide platform
Screw type implant wide platform
Standard and wide platform.
Implants cover screws and healing caps.Available in gingival heights: 3,4mm
Available in gingival heights: 5,6mm
Implants cover screws and healing caps.
13.
13.
2.45
Ø 3.75
Ø 3.30
L
1200-1500
1.90 3.30 2.80 2
900-1200
2.80
500-700
3.30 3.75
200-500
3.30
15-25 15-25
MF4-10330
MF4-11330
MF4-13330
MF4-16330
BioCom screw type implants Ø 3.30mm standard platform.
Description
Screw type implant internal hex.
Material
TitaniumGrade 5
Sand Blasted Acid-Etched
Dimensions
Ø 3.30mmlength 10mm
Ø 3.30mmlength 11.50mm
Ø 3.30mmlength 13mm
Ø 3.30mmlength 16mm
Catalog No.
Ø 3.30mm Implant Procedure
Optional for dense bone
Drill Speed (RPM)
Diameter
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
Countersink(MT-GDN30)
14.
14.
2.45
Ø 3.75
Ø 3.75
L
1200-1500
1.90 3.20 2
900-1200
2.80
500-700
3.20
400-700
3.75
200-500
3.75
15-25
3.75
15-25
MF4-08375
MF4-10375
MF4-11375
MF4-13375
MF4-16375
BioCom screw type implants Ø 3.75mm standard platform.
Description
Screw type implant internal hex.
Material
TitaniumGrade 5
Sand Blasted Acid-Etched
Dimensions
Ø 3.75mmlength 8mm
Ø 3.75mmlength 10mm
Ø 3.75mmlength 11.50mm
Ø 3.75mmlength 13mm
Ø 3.75mmlength 16mm
Catalog No.
Ø 3.75mm Implant Procedure
Optional for dense bone
Drill Speed (RPM)
Diameter
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
Countersink(MT-GDN30)
15.
2.45
1mm
0.4mm
Ø 3.75
Ø 4.20
L
1200-1500
1.90 2 2.80 3.80 4.20 4.20 4.20 3.20 3.80
900-1200
500-700
400-700
200-500
200-500 15-25 15-25
MF4-08420
MF4-10420
MF4-11420
MF4-13420
MF4-16420
DescriptionCatalog No.
Screw type implant internal hex.
Material
TitaniumGrade 5
Sand Blasted Acid-Etched
Dimensions
Ø 4.20mmlength 8mm
Ø 4.20mmlength 10mm
Ø 4.20mmlength 11.50mm
Ø 4.20mmlength 13mm
Ø 4.20mmlength 16mm
BioCom screw type implantsØ 4.20mm standard platform.
Ø 4.20mm Implant Procedure
Optional for dense bone
Drill Speed (RPM)
Diameter
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
(MT-GDN50)Countersink
16.
16.
1mm0.4mm
Ø4.50
Ø5
L
1200-1500
1.90 4.50 2
900-1200
2.80
500-700
3.20
400-700
3.80
400-600
4.50
400-600
5
200-500
5
15-25
5
15-25
MF4-08500
MF4-10500
MF4-11500
MF4-13500
MF4-16500
2.45
BioCom screw type implants Ø 5mm wide platform.
DescriptionCatalog No.
Screw type implant internal hex.
Dimensions
Ø 5mmlength 8mm
Ø 5mmlength 10mm
Ø 5mmlength 11.50mm
Ø 5mmlength 13mm
Ø 5mmlength 16mm
Ø 5mm Implant Procedure
Drill Speed (RPM)
Diameter
Material
TitaniumGrade 5
Optional for dense bone
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
Sand Blasted Acid-Etched
Countersink(MT-GDN50)
17.
1200-1500
1.90
900-1200
2
500-700
2.80
400-700
3.20
400-600
3.80
400-600
300-500
300-500
200-500 15-25 15-25
4.50 5 5.50 5.50 6 6 6
1mm
0.4mmØ 4.50
Ø 6
L
MF4-08600
MF4-10600
MF4-11600
MF4-13600
17.
2.45
DescriptionCatalog No.
Screw type implant internal hex.
Material
TitaniumGrade 5
Sand Blasted Acid-Etched
Ø 6mm
Dimensions
Ø 6mmlength 8mm
Ø 6mmlength 10mm
Ø 6mmlength 11.50mm
length 13mm
BioCom screw type implants Ø 6mm wide platform.
Ø 6mm Implant Procedure
Optional for dense bone
Drill Speed (RPM)
Diameter
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
Countersink(MT-GDN50)
18.
18.
MF7-13375 MF7-16375
13mm 16mm11.50mm8mm 10mm
MF7-10375MF7-08375
MF7-08420 MF7-10420 MF7-11420 MF7-13420 MF7-16420
MF7-08500
MF7-08600
MF7-10500
MF7-10600
MF7-11500
MF7-11600
MF7-13500
MF7-13600
MF7-16500
MF7-11375
Ø 3.75mm
Ø 4.20mm
Ø 5mm
Ø 6mm
MC1-00375
MH-03375MH-04375MH-05375MH-06375
MH-53375MH-54375MH-55375MH-56375
3/4/5/6mm
3/4/5/6mm
Ø 4mm
Ø 5.5mm
MC1-00470
MH-W3500MH-W4500MH-W5500
MH-W3630MH-W4630MH-W5630
3/4/5mm
3/4/5mm
Ø 5mm
Ø 6.3mm
®
Standard and wide platform.
Screw type implant range
Type
Length
Screw type implant standard platform
Screw type implant standard platform
Standard
Screw type implant wide platform
Screw type implant wide platform
Wide
Implants cover screws and healing caps.Available in gingival heights: 3,4mm
Implants cover screws and healing caps.Available in gingival heights: 5,6mm
19.
1200-1500
1.90 2
900-1200
2.80
500-700
2.80 3.60
200-400
3.75
200-500
3.75
15-25
MF7-08375
MF7-16375
MF7-10375
MF7-11375
MF7-13375
Ø 3.10
Ø 3.75
2.45
Ø 2.80
Ø 3.60
®
Seven screw type implants Ø 3.75mm standard platform.
Final Drill A specially designed final drill for 8mm, 10mm, 11.50mm, 13mm and 16mm implants is supplied with every implant, allowing a short and safe drilling procedure.
Ø 3.75mm Implant Procedure
Drill Speed (RPM)
Diameter
It is recommended to use the final drill in bone types 1 and 2
* all implants include the relevant cover screw and final drill
Screw type implant internal hex.
TitaniumGrade 5
Sand Blasted Acid-Etched
Ø 3.75mmlength 8mm
Ø 3.75mmlength 10mm
Ø 3.75mmlength 13mm
Ø 3.75mmlength 16mm
Ø 3.75mmlength 11.50mm
DimensionsCatalog No. DescriptionMaterial
For bonetype 1&2
For bonetype 3&4
Final drill
OR
Countersink
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
(MT-GDN33)
20.
20.
1200-1500
1.90 2
900-1200
2.80
500-700
3.20
400-700
3.30 4.10
200-400
4.20
200-500
4.20
15-25
MF7-08420
MF7-16420
MF7-10420
MF7-11420
MF7-13420
Ø3.30
Ø4.10
Ø 3.70
Ø 3.75
2.45
Ø 4.20
0.4mm
®
Seven screw type implants Ø 4.20mm standard platform.
Final Drill A specially designed final drill for 8mm, 10mm, 11.50mm, 13mm and 16mm implants is supplied with every implant, allowing a short and safe drilling procedure.
Ø 4.20mm Implant Procedure
Drill Speed (RPM)
Diameter
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
It is recommended to use the final drill in bone types 1 and 2
* all implants include the relevant cover screw and final drill
DimensionsCatalog No. Description
Screw type implant internal hex.
Material
TitaniumGrade 5
Sand Blasted Acid-Etched
Ø 4.20mmlength 8mm
Ø 4.20mmlength 10mm
Ø 4.20mmlength 13mm
Ø 4.20mmlength 16mm
Ø 4.20mmlength 11.50mm
For bonetype 1&2
For bonetype 3&4
Final drill
OR
Countersink(MT-GDN33)
21.
21.
1200-1500
1.90 2
900-1200
2.80
500-700
3.20
400-700
3.80
400-600
4.10 4.90
200-400
5
200-500
5
15-25
MF7-08500
MF7-10500
MF7-11500
MF7-13500
MF7-16500
Ø 4.50
Ø 4.50
Ø 5
0.4mm
Ø 4.10
Ø 4.90
2.45
®
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
DimensionsCatalog No. DescriptionMaterial
Seven screw type implants Ø 5mm wide platform.
Final Drill A specially designed final drill for 8mm, 10mm, 11.50mm, 13mm and 16mm implants is supplied with every implant, allowing a short and safe drilling procedure.
Ø 5mm Implant Procedure
Drill Speed (RPM)
Diameter
It is recommended to use the final drill in bone types 1 and 2
* all implants include the relevant cover screw and final drill
Screw type implant internal hex.
TitaniumGrade 5
Ø 5mmlength 8mm
Ø 5mmlength 10mm
Ø 5mmlength 13mm
Ø 5mmlength 11.50mm
Ø 5mmlength 16mm
For bonetype 1&2
For bonetype 3&4
Final drill Countersink
Sand Blasted Acid-Etched
(MT-GDN50)
22.
22.
Ø 5.10
1200-1500
1.90
900-1200
2
500-700
2.80
400-700
3.20
400-600
3.80
400-600
4.50
300-500
5
200-400
5.10 5.90
200-500
6 6
15-25
MF7-08600
MF7-10600
MF7-11600
MF7-13600
Ø 4.50
Ø 5.50
Ø 6
0.4mm
Ø 5.90
2.45
®
Seven screw type implants Ø 6mm wide platform.
Ø 6mm Implant Procedure
Drill Speed (RPM)
Diameter
It is recommended to use the final drill in bone types 1 and 2
* all implants include the relevant cover screw and final drill
Screw type implant internal hex.
TitaniumGrade 5
Ø 6mmlength 8mm
Ø 6mmlength 10mm
Ø 6mmlength 13mm
Ø 6mmlength 11.50mm
For bonetype 1&2
For bonetype 3&4
Final drill
OR
Countersink
DimensionsCatalog No. DescriptionMaterial
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
Final Drill A specially designed final drill for 8mm, 10mm, 11.50mm and 13mm implants is supplied with every implant, allowing a short and safe drilling procedure.
Sand Blasted Acid-Etched
(MT-GDN50)
23. Mountless.
All MIS BIOCOM and SEVEN implants will now be supplied without mounts. These successful implants remain unchanged, but will be supplied without the blue mounts, and will be packaged in distinctive and easily recognizable boxes (Page 24). The BIOCOM and SEVEN mountless implants, have their own tools, available as a set (MK-0037) or purchased separately.
Mountless Tube.
24.Packaging.
Mountless special identification strips.
Implant identification markingsQuick identification of implant size and length. Upper number represents the implant diameter, while the lower represents implant length.
The implant packaging allows a convenient, logical arrangement in the drawer and immediate identification of the parts.
The new packaging is designed for easy identification and use of our new mountless implants. Quick identification features include distinctive color coded boxes, large easy to read lettering and a bright yellow strip which specifically identifies the product as mountless. Added features include a pull tab, for quick and easy opening and newly designed polystyrene tubes for quick and easy extraction of the implants.
Easy pulling tab The pull out tab is easily identified which facilitates quick and easy opening.
25.
Implant identification markingsThe cap of the outer tube is color-coded according to the implant diameter.
White6
26.
Surgical Instruments.
The wide variety of MIS tools is specially designed with the purpose of facilitating a safe, simple and short implantation procedure.
28.
MaterialDimensions
Stainless steelMarking Drill Ø 1.90mmlength 34mm
Ø 2mmlength 26.7mm
Stainless steel
Ø 2mmlength 37.3mm
Stainless steel
Ø 2.80mmlength 28.4mm
Stainless steel
Ø 2.80mmlength 37.5mm
Stainless steel
Ø 3mmlength 37.6mm
Stainless steel
Ø 3.20mmlength 28.5mm
Stainless steel
Ø 3.20mmlength 37.6mm
Stainless steel
Ø 3.50mmlength 37.7mm
Stainless steel
Ø 3.80mmlength 28.7mm
Stainless steel
Ø 3.80mmlength 37.8mm
Stainless steel
MT-TD110
Short Pilot Drill
Pilot Drill
Short Twist Drill
Twist Drill
Twist Drill
Short Twist Drill
Twist Drill
Twist Drill
Short Twist Drill
Twist Drill
MT-TDS20
MT-TD200
MT-TDS28
MT-TD280
MT-TD300
MT-TDS32
MT-TD320
MT-TD350
MT-TDS38
MT-TD380
Ø 5mmlength 38.2mm
Stainless steel
Ø 5.50mmlength 38.2mm
Stainless steel
Ø 5.50mmlength 28.9mm
Stainless steel
Ø 5mmlength 28.9mm
Stainless steel
Ø 4.50mmlength 28.9mm
Stainless steel
Ø 4.50mmlength 38.2mm
Stainless steel
Twist Drill
Twist Drill
Short Twist Drill
Short Twist Drill
Short Twist Drill
Twist Drill
MT-TD500
MT-TD550
MT-TDS55
MT-TDS50
MT-TDS45
MT-TD450
Ø 3.75/4.2mmlength 26mm
Stainless steelMT-GDN33 Countersink for standard platform
Ø 5/6mmlength 26.8mm
Stainless steelMT-GDN50 Countersink for wide platform
Drills.Internal irrigation
Color coding:
Drill diameter 2.80mm
Drill diameter3mm / 3.20mm
Drill diameter3.50mm / 3.80mm
Drill diameter 4.50mm
Drill diameter 5mm / 5.50mm
Note: short drills are only marked with 8, 10 and 11.5mm depths.
30.
MT-SMD10
MT-TDN19
MT-TDN20
MT-TDN28
MT-TDN30
MT-TDN32
MT-TDN35
MT-TDN38
MT-TDN50
MT-TDN45
MT-TDN55
Twist Drill 3.20mmMT-TDN32
length 27.5mm
Ø 1.90mmlength 34mm
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
MaterialDimensions
Ø 2mmlength 37.3mm
Ø 2.80mmlength 37.5mm
Ø 3mmlength 37.6mm
Ø 3.20mmlength 37.6mm
Ø 3.50mmlength 37.7mm
Ø 3.80mmlength 37.8mm
Ø 5mmlength 38.2mm
Ø 4.50mmlength 38.2mm
Ø 5.50mmlength 38.2mm
Drills.External irrigation
Marking Drill
Pilot Drill
Twist Drill
Twist Drill
Twist Drill
Twist Drill
Twist Drill
Twist Drill
Twist Drill
Twist Drill
Spade Marking Drill
31.
Twist Ceramic Drill 2.80mmMT-CRD28
Dimensions: Ø 2.10mmlength 28.5mm
Ø 2mmlength 33.5mm
Ø 2.80mmlength 35mm
Material: Zircon-dioxide ceramics
Zircon-dioxide ceramics
Zircon-dioxide ceramics
Marking Drill Pilot Drill Twist Drill
Ceramic Drills.External irrigation
The features of the Ceramic Drills include reduced vibration; pleasant, smooth operation; and continuous substance removal, whether used in implantology or oral surgery.
The MIS Ceramic Drills are made of a high performance ceramic mix of partly stabilized by yttrium and aluminium ceramic. The mixture of these two established materials provides MIS Ceramic Drills with an above-average bending strength of 2000 MPa. In comparison, the bending strength of zirconium oxide ceramic, which is used, among other things, for manufacturing root posts, is 1200 MPa.
Advantages- Free of metal - Biocompatible - Corrosion free
MT-CRD21 MT-CRD20 MT-CRD28
32.Trephine Burs.Internal irrigation
Hand Trephine Bur incl. Key
Trephine
Trephine
Trephine
Inner Ø6mm Outer Ø7mm
length 37mm Inner Ø4mm Outer Ø5mm
length 37mm Inner Ø5mm Outer Ø6mm
length 37mm Inner Ø6mm Outer Ø7mm
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Dimensions Material
Manual Trephine Bur, with replaceable drilling tube, /6 mm, adjustable depth, gradation 1mm, inc. key.
Hand Trephine Bur key
MT-HTR10
MT-00400
MT-00500
MT-00600
33. Thread forms.BioCom
Dimensions Material
All MIS implants are self tapping. In most cases thread forms are not necessary.However, in bone type 1 it is recommended, to use thread forms according to MIS implantation procedures.
Surgical Tools.UNO
Ø3.30mm length 28mm
Stainless steelShort Thread FormMT-TNS33
Ø3.30mm length 36mm
Stainless steelLong Thread FormMT-TNL33
Ø3.75mm length 28mm
Stainless steelShort Thread FormMT-TNS37
Ø3.75mm length 36mm
Stainless steelLong Thread FormMT-TNL37
Ø4.20mm length 28mm
Stainless steelShort Thread FormMT-TNS42
Ø4.20mm length 36mm
Stainless steelLong Thread FormMT-TNL42
Ø5mm length 28mm
Stainless steelShort Thread FormMT-TNS50
Ø5mm length 36mm
Stainless steelLong Thread FormMT-TNL50
Ø6mm length 28mm
Stainless steelShort Thread FormMT-TNS60
Ø6mm length 36mm
Stainless steelLong Thread FormMT-TNL60
length 12mm Stainless steelUno one piece implant short key MT-HKS15
length 17mm Stainless steelUno one piece implant long key MT-HKL21
length 20mm Stainless steelUNO One piece implant insertion toolMT-HKO21
length 22mm Stainless steelLong ratchet adapter for narrow implantMT-HRL27
length 22mm Stainless steelUNO one piece implant motor adapter, shortMT-UMS21
length 15mm Stainless steelShort ratchet adapter for narrow implantMT-HRS27
length 30mm Stainless steelUNO one piece implant motor adapter, longMT-UML21
34.
Dimensions Material
All MIS implants are self tapping. In most cases thread forms are not necessary.In bone type 1 it is recommended, however, to use thread forms according to MIS implantation procedures.
Surgical Tools.Biocom, Seven
*should not be used for implant insertion
length 22.5mm Stainless steelShort Motor Adapter for Int. Hex. Connection MT-MMH10
Ø3.20/2mm length 24mm
Stainless steelMT-PP001 Parallel Pin
length 10mm Stainless steelMT-HW001 Hand Wrench
length 16mm Stainless steelMT-HDS30 Short Hex. Drive 0.05”
length 22mm Stainless steelMT-HDL30 Long Hex. Drive 0.05”
length 22mm Stainless steelMT-SMK13 Short Motor Key Adapter 0.05"
length 30mm Stainless steelMT-LMK13 Long Motor Key Adapter 0.05"
length 28.7mm Stainless steelMT-DE001 Drill Extender
length 18mm Stainless steelMT-HHK24 Hex. Hand Key for Int. Hex. Connection
length 25mm Stainless steelMT-MMH20 Long Motor Adapter for Int. Hex. Connection
length 22mm Stainless steelMT-MRH20 Hex. Ratchet Long Adapter for Int. Hex. Connection
length 16mm Stainless steelHex. Ratchet Short Adapter for Int. Hex. Connection MT-MRH10
35. Surgical Instruments.
Dimensions:
Dimensions:
Dimensions:
Dimensions:
Material:
Material:
Material:
Material:
Thread Form Adapter
length 14mm
Stainless steel
MT-TFA01
Ratchet
length 75mm
Stainless steel
MT-RI030
Ø3.20 mm length 28.5mmStainless steel
Body Try in 3.20mm MT-BT032
Ø3.80 mm length 28.5mmStainless steel
Body Try in 3.80mm MT-BT038
Ø4.50 mm length 28.5mmStainless steel
Body Try in 4.50mm MT-BT045
Body Try in 2.80mm
Ø2.80 mm length 28.5mmStainless steel
MT-BT028
Ø5.50mm length 28.5mmStainless steel
Body Try in 5.50mm MT-BT055
Ø5mm length 28.5mmStainless steel
Body Try in 5mm MT-BT050
Surgical Adapter Driver
length 120mm
Aluminum + Stainless steel
MT-MSD20
Hammer Solid-Plastic Insert
Ø2.80 mm length 28.5mmStainless steel
MT-MAL10Implant site depth probe 8/10/11.50/13/16mm
Ø1.80/2.70mm length 100mm
Ø5.5mm length 75mm
Stainless steel Stainless steel
MT-BTI10
Body Try in 2mm MT-BT020
Ø2 mm, length 28.50mmStainless steel
*
*
should not be used for implant insertion
Motor Tissue Punch MT-TP420
Ø4.2 mm, length 29.50mmStainless steel
Implant Direction Indicator
length 15mm
Stainless steel
MT-DI001Tissue Punch
length 28mm
Stainless steel
MT-TP500
Stainless steel
Torque wrenchMT-RI040
length 80mm
CT-HCK01Holding abutment mount key
36.
37.
Kits.
Ongoing research and development efforts by
MIS engineers and scientists have produced
state-of-the-art kits that simplify common
procedures and provide creative solutions
for dealing with complex cases.
38.MIS presents the Advanced Surgical Kit. The kit includes tools for one stage Mistral implants, as well as tools for two stage Biocom and Seven mountless implants.
MK-0035
MK-EI35 (External irrigation drill version also includes)
MK-IR35 (Internal irrigation drill version also includes)
Mistral abutment extractorHolding abutment/mount keyBody try in 2mmBody try in 2.80mmBody try in 3.20mmBody try in 3.80mmBody try in 4.50mmBody try in 5mmBody try in 5.50mmDrill extenderImplant Direction IndicatorCountersink for standard platformCountersink for wide platformHand key for int. hex. connectionShort screwdriver for 0.05" hex.Long hand screwdriver for 0.05" hex.Insertion tool for Mistral octagon implantHand wrenchLong motor key adapter 0.05"Short motor adapter for int.hex.connectionLong motor adapter for int.hex.connectionHex. ratchet short adapter for int. hex. connectionHex. ratchet long adapter for int. hex. connectionParallel pinRatchet wrenchShort motor key adapter 0.05"
Pcs
Marking drill 1.90mmPilot drill 2mmTwist drill 2.80mmTwist drill 3.20mmTwist drill 3.80mmTwist drill 4.50mmTwist drill 5mmTwist drill 5.50mm
Marking drill 1.90mmPilot drill 2mmTwist drill 2.80mmTwist drill 3.20mmTwist drill 3.80mmTwist drill 4.50mmTwist drill 5mmTwist drill 5.50mm
CT-CE140CT-HCK01MT-BT020MT-BT028MT-BT032MT-BT038MT-BT045MT-BT050MT-BT055MT-DE001MT-DI001MT-GDN33MT-GDN50MT-HHK24MT-HHR07MT-HHR13MT-HK310MT-HW001MT-LMK13MT-MMH10MT-MMH20MT-MRH10MT-MRH20MT-PP001MT-RI030MT-SMK13
MT-TDN19MT-TDN20MT-TDN28MT-TDN32MT-TDN38MT-TDN45MT-TDN50MT-TDN55
MT-TD110MT-TD200MT-TD280MT-TD320MT-TD380MT-TD450MT-TD500MT-TD550
||||||||
||||||||
11111111112111111111111311
11111111
11111111
Kit Contents:
||||||||||||||||||||||||||
39. Advanced
Surgical Instrument Kit.
Additional advantages of the Surgical Instrument Kit:
It is made of medically approved plastic.
It can be fully sterilized using an ultrasonic bath, with a temperature that does not exceed.
It is small in size and, therefore, easy to store.
The modular trays represent the optimal solution in terms of cleaning, decontamination and sterilization due to the absence of hidden surfaces. There is an optimization of the steam flow for better elimination of condensation.
40.Drill Stopper Kits.
The Drill Stopper Kits ensure the dental surgeon simple and accurate depth control.
Stoppers
IN Insert
OUT Insert Drill
Five sleeves for standard implants in 8, 10, 11.5, 13 and 16mm with different-colored rings for each diameter.
Teflon tube simplifies the insertion of the drill into the stopper sleeve.
Teflon tube simplifies the removal of the drill from the stopper sleeve.
Color-coded drill matches sleeve color.
Simple.Quick, easy assembly.
Fast.Color coding for immediate identification of sleeve diameter.
Clear. Clearly arranged matching depth sleeves from 8mm to 16mm.
Safe. Safe drilling to planned depth.
The kit is available in 5 diameters. The MIS Stopper Kit fits MIS drills, enabling the doctor to drill to the exact desired depth during implantation. It is simple to use and available in different diameters (2mm, 2.8mm, 3.2mm, 3.8mm, 4.5mm).
Kit Contents:
Ø 2mm - Standard
Ø 2.80mm - Standard
Ø 3.80mm - Standard
Ø 3.20mm - Standard
Ø 4.50mm - Standard
MK-ST020
MK-ST028
MK-ST032
MK-ST045
MK-ST038
41.Yeung Bone Harvest Kit.
The Bone Harvest Kit ensures the dental surgeon’s easy and simple bone harvesting during surgery.
DrillColor-coded drill matches the sleeve color.
Revolutionary dual action-bone harvesting while drilling; The harvested bone can now be used elsewhere, as needed. A simple procedure enables the use of the patient’s own bone, as opposed to substitute materials. Drills can also be used as final drills.
Simple.The bone will accumulate inside the drill’s slot during drilling.
Kit ContentsThe Bone Harvest Kit includes these drills:
Easy.The Bone Harvest Kit can be used as a final drill while harvesting bone.
Safe. The Bone Harvest Kit can be used with MIS drill stoppers, ensuring a safe drilling procedure.
MK-BH26
Ø 2.80mm
Ø 3.20mm
Ø 3.80mm
Ø 4.50mm
Color coding: Drill diameter 2.80mm Drill diameter 3.80mm
Drill diameter 3.20mm Drill diameter 4.50mm
Recommendation:The drill can be used with external irrigation. Start drilling with a slight push and a little continuous pressure. When the drill is taken out, continue rotation to keep the bone inside the drill’s slot.
* The drills should be used for a maximum of 30 drillings.
Recommended Speed:Recommended speed is between20-50 RPM without irrigation.
Material:The bone harvest drills are made of stainless steel and can be easily cleaned.
MT-BC280
MT-BC320
MT-BC380
MT-BC450
42.Crest
Widener Kit.MK-CW28
The MIS Crest Widener is used to widen a narrow alveolar crest which has sufficient height for implantation. By separating the cortical plates new bone is created in between the plates, and the attached gingiva is extracted simultaneously. With this technique, bone augmentation is avoided, the implant is placed in the correct lateral position and sufficient attached gingiva is obtained. In addition, the widener can be used to allow easy distal or mesial orthodontic movements of the molars.
The Crest widener consists of 4 arms, 2 on each side connected with guiding pins and an activating screw. Also provided in the kit: handle key and titanium wire.
43.
Advantages.
Mucosal Distraction leads to sufficient attached gingiva and soft tissue cover (DistractionHistiogenesis).
Implant placement is possible after extremely short post-operative period (5-8 weeks).
Simple, short, minimal traumatic procedure.
Encourages ideal lateral implant placement when needed.
No pain or morbidity at donor site.
Minimally compromised aesthetics.
Less technique-sensitive.
The transported bone is not stripped from periostium, therefore no post operative bone resorption.
44.Abrahami Drill
Guide Kit.MK-0011
The Abrahami Drill Guide Kit has been designed to enable the dental surgeon to accurately locate and drill the holes of two or more consecutive implants with optimal spacing, angulation and parallelism.
Paralleling PinsThese are dual diameter pins where half of their length is 2mm and half is 2.8mm. They enable the surgeon to visualize the implant position and angulation.
There are 4 different blocks:Short and thin:10mm length, 2mm diameter
Short and wide:10mm length, 2.8mm diameter
Long and thin:16mm length, 2mm diameter
Long and wide:16mm length, 2.8mm diameter
Extension Arms
Short
Medium
Long
There are 3 different extension arms:
6 to 8 mm from the centerline of the central block to the holes in the free end of the extension arm.
9 to 11 mm from the centerline of the central block to the holes in the free end of the extension arm.
12 to 14 mm from the centerline of the central block to the holes in the free end of the extension arm.
45.
Optimal parallelismGuides and ensures complete vertical parallelism between the implants.
The stabilization system
The extension arms
Optimal spacing
Optimal angulation
Located within the top of the block and consists of a screw (top) and a spring-loaded ball (inside). It allows the extension pin to be gradually stabilized at the desired length and inclination.
Permit variable bucco-lingual inclinations and mesio-distal locations relative to the central block. In the extension arm’s free end are 2 holes for 2mm and 2.8mm drills in perpendicular planes.
Optimal spacing enables the surgeon to locate the holes for the planned implants with the required inter-implant distance.
Screw
Spring
Ball
Location pin
Optimal angulation enables the surgeon to drill in the most advantageous bucco-lingual angle possible, within anatomic limits.
Before cleaning, the location pins have to be separated as follows: screws, springs, balls and pins. Cleaning and drying the parts is essential for the good functioning of the system. This will avoid erosion of the parts.
Location Pins Ø2mm
Location Pins Ø2.80mm
Extension Arms
Paralleling Pin 20mm
Short 10mm
Short 10mm
6, 7, 8mm
9, 10, 11mm
Short 16mm
Short 16mm
12, 13, 14mm
46.Bone
Compression Kit.MK-0020
The Bone Compression Kit developed by MIS improves the treatment of sinus lifting and anchoring in relatively soft bone types 3 and 4. A simple bone compression procedure enables better implantation, better primary stability, and the prevention of bone loss.
Advantages.
- Prevents traumatic osteotomy- Increases bone density- Increases primary stability- Gradual control of expansion
47.
1
2
3
4
1.6
2.0
2.4
2.8
Ø=2.3
Ø=2.5
Ø=3.1
Ø=3.5
Ø=2.5
Ø=2.7
Ø=3.3
Ø=3.8
Ø=2.8
Ø=3.3
Ø=3.6
Ø=4.2
3.3
3.75
4.2
5
8 10 13
Kit Contents
Convex Compress Screw 1.6/2.8 mm
Convex Compress Screw 2/3.3 mm
Convex Compress Screw 2.4/3.6 mm
Concave Sinus Screw 3 mm
Concave Sinus Screw 4 mm
Short Motor Mount Adapte
Short Ratchet or Hand Wrench Adapter
Long Ratchet or Hand Wrench Adapter
Spade Marking Dril
Convex Compress Screw 2.8/4.2 mm
Long Motor Mount Adapter
Concave Sinus Screw 3.5 mm
Ratchet Wrench
Indications for use:
- Using the osteotomes depends on the bone type.
- Sensitive manual control of the osteotome reduces the risk of perforation of the upper maxilla to a minimum.
Laser marks on the screw indicate heights of 8,10,13 mm.
Flowchart
*Dimensions (mm)
CompressLength
ØApical ØImplant
MO-CO160
MO-CO200
MO-CO240
MO-SO300
MO-SO400
MT-MMA10
MT-MRS10
MT-MRL10
MO-CO280
MT-MMA20
MO-SO350
MT-SMD10
MT-RI030
48.Uno Implant Surgical Kit.
MK-0036
The MIS UNO implant surgical Kit is a small kit which includes drills, tools and a ratchet wrench.
49.
Kit Contents
Pilot drill 2mm external irrigation
Twist drill 2.40mm external irrigation
Body try in 2mm
Parallel pin
Spade marking drill
Ratchet wrench
MT-TDN20
MT-TDN24
MT-BT020
MT-PP001
MT-SMD10
Long ratchet adapter for narrow implantMT-HRL27
MT-RI030
Hex. Ratchet Long Adapter for Int. Hex. Connection
MT-MRH20
Twist drill 3mm external irrigationMT-TDN30
Ball attachment anchor keyMT-BK235
UNO One piece implant insertion toolMT-HKO21
UNO one piece implant motor adapter, short
MT-UMS21
Long Hex. Drive 0.05”MT-HDL30
Long Motor Adapter for Int. Hex. Connection
MT-MMH20
50.The Basic Kit.MK-0014
MK-0014 Kit Contents.
Body try in 2mmBody try in 2.80mmBody try in 3.20mmBody try in 3.80mmDrill extenderCountersink for standard platformLong hex. drive 0.05"Hand wrenchLong motor adapter for int.hex.connectionHex. ratchet short adapter for int. hex. connectionHex. ratchet long adapter for int. hex. connectionParallel pinRatchet wrenchSpade marking drillPilot drill 2mmTwist drill 2.80mmTwist drill 3.20mmTwist drill 3.80mm
Pcs
The MIS Basic Kit is a smaller kit which contains the minimum surgical instruments necessary for implant placement.
The MIS Organizer Kit is a small kit which includes empty places for drills, tools, ratchets, etc.
The Organizer Kit.MK-0012
MT-BT020MT-BT028MT-BT032MT-BT038MT-DE001MT-GDN33MT-HDL30MT-HW001MT-MMH20MT-MRH10MT-MRH20MT-PP001MT-RI030MT-SMD10MT-TD200MT-TD280MT-TD320MT-TD380
||||||||||||||||||
111111111113111111
51.
6mm
11mm
10mm
The MIS Convex Osteotome Set is more commonly used for expanding the bone while preparing the implant site. The Set can also be used in sinus elevation procedures.
Convex
Convex Osteotome Set.
MK-0024
Convex bajonet Osteotome with Stopper
Catalog No. Dimensions Material
Stainless steel
Stainless steelConvex Osteotome with Stopper
MO-CBS20MO-CBS30MO-CBS32MO-CBS40
MO-CS200MO-CS300MO-CS325MO-CS400
Ø2mm Ø3mm Ø3.25mm Ø4mm
Ø2mm Ø3mm Ø3.25mm Ø4mm
52.
8mm10mm
11.5mm13mm
16mm
8mm10mm
11.5mm13mm
16mm
Osteotome Set.MK-0002
The MIS stainless steel Osteotome Set tools are laser marked for depth, and are used for splitting and expanding the bone while preparing the implant site. The implant site osteotome tools in this set has a convex tip.
Convex
Sharp flat
Implant Site Osteotome
Alveolar Ridge Expanding Osteotome
Catalog No. Dimensions Material
Stainless steel
Stainless steel
MO-IP180MO-IP280MO-IP320MO-IP380MO-IP435
MO-SP300MO-SP450MO-SP550
Ø1.80mm Ø2.80mm Ø3.20mm Ø3.80mmØ4.35mm
Ø3mm Ø4.50mm Ø5.50mm
53.
6mm
11mm
16mm
Sinus Concave Osteotome with Stopper
Sinus Concave bajonet with Stopper
Catalog No. Dimensions Material
Stainless steel
Stainless steel
MK-0023
The MIS Alveolar Ridge Expanding Osteotomes Set is used for sinus elevation. The Set includes four straight sinus concave osteotome with stoppers, and four sinus concave bayonet tools with stoppers. All tools in this Kit are made of stainless steel.
ConcaveMO-SLS20MO-SLS30MO-SLS32MO-SLS40
MO-SLA20MO-SLA30MO-SLA32MO-SLA40
Ø2mm Ø3mm Ø3.25mm Ø4mm
Ø2mm Ø3mm Ø3.25mmØ4mm
Sinus Lift Osteotome Set.
54.
Prosthetic.
MIS offers a wide variety of superstructures. This provides many options, with an emphasis on simplicity and convenience in restoration work.
56.
Open Tray
TitaniumClosed tray impression coping length 6.80mm
TitaniumClosed tray impression coping length 6.80mm
PlasticImpression coping plastic cap - 5 pack length 7.50mm
PlasticImpression coping plastic cap - 5 pack length 7.50mm
TitaniumDirect Prosthetic screw length 7.60mm, 30Ncm
TitaniumDirect Prosthetic screw length 7.60mm, 30Ncm
Closed Tray
MaterialDimensions
Stainless steellength 13mm
Stainless steellength 13mm
Titaniumlength 21.30mm
Direct Impression copingMD-I0375
Impression coping for open tray internal hex. Wide platform
MW-I0470
Direct Impression coping guide pinMD-G0213
Impression Coping.
Transfer analogs
Direct Impression Coping Set for Closed Tray int .hex (MD-IT200)
Direct Impression Coping Set for Closed Tray int .hex .Wide platform (MW-IT200)
Note: MD-G0213 is included with MD-I0375 and MW-I0470.
Stainless steellength 11mm
Stainless steel
Titanium
length 11mm
length 16.5mm
Direct impression coping for closed trayMD-IT100
Direct Impression coping for closed tray internal hex. Wide platform
Direct impression coping guide pin internal hex
MW-IT100
MD-GP100
Stainless steellength 13mm
Stainless steellength 12mm
Stainless steellength 13mm
Stainless steellength 12mm
Press fit
Analogs
UNO
Aluminium
Plastic
length 18mm
length 12.40mm
MaterialDimensions
Press fit impression copingMD-PF375
Direct press fit for closed tray. Wide platformMW-PF550
Implant analogMD-RSM10
Wide diameter implant analogMW-RSM10
UNO one piece analogMO1-RSA10
Uno One Piece implant comfort plastic capMM-OUP01
58.Complete Prosthetic Set
CPS.
The Complete Prosthetic Set has been designed to enable an easy impression and transfer technique. It combines solutions for both bridges and single crowns and enables a simple restorative
process without necessary adjustments, nor additional elements. The Complete Prosthetic Set ensures an accurate fit for the impression coping.
Standard platform
Wide platform
MK-WCPS1MK-WCPS2MK-WCPS3MK-WCPS4
MK-CPS01MK-CPS02MK-CPS03MK-CPS04
height 1mmheight 2mmheight 3mmheight 4mm
height 1mmheight 2mmheight 3mmheight 4mm
59.
h
Ø
h
Ø
Standard platform
Wide platform
Stainless steel
Standard abutment analog
MD-RSM48
Titanium
Anatomic cementing transgingival abutment
MD-CPS01
Plastic
Impression coping plastic cap
Plastic
Plastic healing cap
Burn out plastic
Burn out anti-rotation plastic cap
Burn out plastic
Burn out plastic cap
Titanium
Direct prosthetic screw
Titanium
Anatomic cementing transgingival abutment
MD-CPS02
Titanium
Anatomic cementing transgingival abutment
MD-CPS03
Titanium
Anatomic cementing transgingival abutment
MD-CPS04
Material:
Material:
Dimensions:
Titanium Titanium Titanium Titanium Stainless steel
Wide anatomic cementing transgingival abutment
Wide anatomic cementing transgingival abutment
Wide anatomic cementing transgingival abutment
Wide anatomic cementing transgingival abutment
Wide abutment analog
Material:Dimensions:
Plastic Plastic Plastic Burn out plastic Titanium
Impression coping plastic cap
Wide plastic healing cap
Wide burn out anti-rotation plastic cap
Wide Burn out plastic cap
Direct prosthetic screw
Material:
MM-MTP53 MM-CHC55 MM-APC49 MM-CPC49 MD-S0220
MW-CPS01 MW-CPS02 MW-CPS03 MW-CPS04 MW-RSM48
MM-MTP53 MW-CHC55 MW-APC49 MW-CPC49 MD-S0220
Height 1mm, Ø4.8 Height 2mm, Ø4.8 Height 3mm, Ø4.8 Height 4mm, Ø4.8
Height 1mm, Ø5.5 Height 2mm, Ø5.5 Height 3mm, Ø5.5 Height 4mm, Ø5.5
60.
4
1
23
5
MK-RADT1RA Technical Kit.
Reverse Abutment Kits
The drilling fixture is a mechanical device for creating the housing of the abutment screw once the PCE and the ICE are definitively connected.
The Drilling Fixture
RA Technical Kit
The fixture is made up of four components:
1. The ”body,” (4) with a Ø2.3 mm hole on top; on the bottom, an aperture allowing the positioning of the footer; and on the lateral side a screw to be activated by an “elen”. 2. The footer is for maintaining the model of the RA; it has a Ø1.8 mm diameter hole at its base (1,2).3. The footer screw (5).4. A stopper used with the acryl ICE (3).
The Reverse Abutment technical kit facilitates the accurate drilling of a screw canal through the completed RA Prior to its casting.
1
2
3
4
5
61.
Stainless Steel
length 55mm
length 40mm
MaterialDimensions
MK-RADT1
Additional components
RA Technician kit
Tools
Drill Ø 1.80mm MT-RAD18
Drill Ø 2.30mmMT-RAD23
Stainless Steellength 40mmMT-RAPP2 Reverse Abutment Parallel Pin
Stainless Steellength 57.7mmAllen key 2mmMT-AL002
Locking fixture nut
Drilling guide
Stopper
Body
Footer screw
MT-RAD10
Stainless Steel
R.AI.C.E
I.EP.C.E
Reverse abutmentImplant connection element
Intermediary elementProsthesis connection element
Acronyms:
62.Gold Base Kit.
GBK.
Standard platform
Wide for standard platform
The Gold Base Kit is conveniently designed to house all the necessary components needed for the fabrication of an RA with a gold I.C.E and for its simple impression transfer.
MK-RAGS1
MK-RAGW1
63.
Standard platform
Wide for standard platform
Standard abutment analog
Gold
Gold
Gold implant Connection element
Gold implant Connection element
Plastic
Impression coping plastic cap
Plastic
Standard plastic healing cap.
Burn out plastic
Burn out plastic
Burn out plastic
Burn out plastic
Burn out anti rotation standard plastic cap.
Burn out anti rotation wide plastic cap
Burn out plastic
Burn out plastic
Burn out standard plastic cap.
Burn out wide plastic cap
Connector pin
Connector pin
Titanium
Titanium
Plastic
Plastic
Direct prosthetic Screw Internal hex.
Direct prosthetic Screw Internal hex.
Prosthetic connection element-standard
Prosthetic connection element-wide
Material:
Material:
Stainless steel
Material:
Plastic Plastic
Impression coping plastic cap
Wide plastic healing cap
Material:
Wide abutment analog
MD-RSM48MD-RAG01 MD-RAI01MD-S0220 MM-RAPE1
MM-MTP53 MM-CHC55 MM-APC49 MM-CPC49
MD-RAG01 MD-RAI01MD-S0220 MW-RAPE1 MW-RSM48
MW-APC49 MW-CPC49MM-MTP53 MW-CHC55
Stainless steel
64.Plastic Base Kit
PBK.
Standard platform
Wide for standard platform
The plastic base kit is conveniently designed to house all the necessary components needed for the fabrication of an RA with a plastic I.C.E and for its simple impression transfer.
MK-RAPS1
MK-RAPW1
65.
Standard platform
Stainless steel
Stainless steel
Standard abutment analog
Direct plastic cylinder with hex.
Plastic
Impression coping plastic cap
Plastic
PlasticPlastic
Plastic
Standard plastic healing cap.
Burn out plastic
Burn out anti rotation standard plastic cap.
Burn out plastic
Burn out standard plastic cap.
MM-CPC49
Connector pin
Connector pin
Material:
Material:
Material:
Plastic
Impression coping plastic cap
Plastic
Wide plastic healing cap
Material:
Wide abutment analog
Burn out plastic
Burn out anti rotation wide plastic cap
Burn out plastic
Burn out wide plastic cap
Titanium Titanium
Titanium
Direct plastic cylinder with hex.
MD-RSM48MD-CPH13 MD-RAI01
MM-MTP53 MM-CHC55 MM-APC49
MD-RAI01 MW-RSM48MD-CPH13
MM-MTP53 MW-CHC55 MW-APC49 MW-CPC49
Direct prosthetic screw
Direct prosthetic screw
MD-S0220
MD-S0220
66.
Prosthetic Options
MH-03375MH-04375MH-05375MH-06375
MD-RSM10
MD-I0375
Sta
ndar
d
Sin
gle
toot
h /
Cro
wn
Ana
tom
ic
Brid
ge/B
ar
Direct Temporary Plastic Cylinder
Plastic Cylinder
Gold-Plastic Cylinder
Temporary Titanium Cylinder
AnalogsHealing Caps
ImpressionCoping
MD-TPH50 MD-TCH13 MD-CPH13 MD-GPC10
MD-CPH50
MD-GP010MD-CP013
MD-CP050
MD-RSM10
MD-IT100
MM-MTP53
MD-IT200
MH-53375MH-54375MH-55375MH-56375
reconstruction tablestandard platform
Direct System.
Item descriptions on page 68
67.
3mm4.3mm
1mm2.31mm
2.4mm1.5mm
1.6mm 2.4mm
1mm2mm
1mm 2mm
3mm 4mm
3mm4mm
Prosthetic Options
Esthetic abutment
Item descriptions on page 69
Sta
ndar
d
Sin
gle
toot
h /
Cro
wn
Ana
tom
ic
Brid
ge/B
ar
Complete ProstheticAbutment
Cementing Post Angulated Abutment
AnalogsHealingCaps
ImpressionCoping
Cemented reconstruction table
standard platform
Direct System.
*MH-03375MH-04375MH-05375MH-06375
MD-I0375
MD-RSM10
MD-RSM10MD-IT200
MM-MTP53
MD-IT100MH-53375MH-54375MH-55375MH-56375
MD-CPS01MD-CPS02MD-CPS03MD-CPS04
MD-TAD10MD-TAD20MD-TAD30MD-TAD40
MM-APC49(Anti rotation)
MM-CPC49
ED-CPH80
ED-CP080
MD-A0010
Zircon abutment
MD-CR010
Standard abutment
MD-CTP10
MD-WMAC1MD-MAC10
MD-MACF1
MD-P0030
MD-AN251
MD-P1530
MD-P2530
MD-A1510
MD-A2510
MD-AN151
68.
L
reconstructionDirect System.
MaterialDimensions
Titaniumlength 11mm
Burn-out plasticlength 11mm
Burn-out plasticlength 11mm
Burn-out plasticlength 11mm
Burn-out plasticlength 11mm
Plasticlength 12mm
Burn-out plastic + gold - a
length 16.20mm
Burn-out plastic + gold - a
length 18.20mm
Titaniumlength 6.90mm30 Ncm
Titaniumlength 7.60mm30 Ncm
Gold-slength 7.70mm20 Ncm
Titaniumlength 12mm30 Ncm
Titaniumlength 14mm30 Ncm
Note: all superstructure prices include the MD-S0220 prosthetic screw.
Temporary titanium cylinder with hex. MD-TCH13
Direct plastic cylinder single tooth/crown with internal hexagon
MD-CPH13
Direct plastic cylinder bridge/bar without internal hexagon
MD-CP013
Wide Profile Direct Plastic cylinder without hexagon
MD-CP050
Wide Profile Direct Plastic cylinder with hexagon
MD-CPH50
Direct temporary plastic cylinder internal hexagon
MD-TPH50
Direct gold - plastic abutment cylinder with hexagon
MD-GPC10
Direct gold-plastic cylinder without hexagon
MD-GP010
Mini prosthetic screwMD-S0200
Direct prosthetic screwMD-S0220
Direct gold prosthetic screwMD-G0220
Medium prosthetic screwMD-S0222
Long prosthetic screwMD-S0224
69.
h
L
Cemented reconstructionDirect System.
MaterialDimensions
Direct System- Cemented reconstruction
Titaniumheight 1mmheight 2mmheight 3mmheight 4mm
Direct cementing transgingival postMD-TAD10MD-TAD20MD-TAD30MD-TAD40
Burn-out plasticlength 8mmED-CPH80
Burn-out plasticlength 8mmED-CP080
Titaniumlength 11mmEsthetic abutmentMD-A0010
Titaniumlength 13mmEsthetic abutmentMD-P0030
Zirconlength 11mmStandard platform Zircon abutmentMD-CR010
Titaniumlength 10.5mmNarrow cementing postMD-CTP10
Titaniumlength 11.5mmStandard cementing postMD-MAC10
Titaniumlength 11.5mmMD-WMAC1
Titaniumlength 11mm15° Angulated abutmentMD-AN151
Titaniumlength 10.5mm25° Angulated abutmentMD-AN251
Titaniumlength 11.1mm15° Esthetic angulated abutmentMD-A1510
Titaniumlength 11.1mm25° Esthetic angulated abutmentMD-A2510
Titaniumlength 13.1mm15° Angulated abutmentMD-P1530
Titaniumlength 13.1mm25° Esthetic angulated abutmentMD-P2530
Titaniumlength 6.90/7.60mm30 Ncm
Mini prosthetic screwDirect prosthetic screw
MD-S0200MD-S0220
Gold-slength 7.70mm20 Ncm
Direct gold prosthetic screwMD-G0220
Titaniumlength 12/14mm30 Ncm
Medium prosthetic screwLong prosthetic screw
MD-S0222MD-S0224
Titaniumlength 13mmFriction fit cementing post platform switching, SPMD-MACF1
Direct cementing post plastic cap with hex
Direct cementing post plastic cap without hex
Patent Pending
Wide cementing post for standard platform
Note: all superstructure prices include the MD-S0220 prosthetic screw.
70.
h
3.2mm2.6mm
1mm1mm
Multi-Unit keyMT-MUK02
Multi-Unit healing cap
MH-00450
Height 3mm
Stainless steel Stainless steellength 22mm
Stainless steellength 10mm
Gold
Multi-Unit bar gold coping
MM-BGC45
Height 3.2mm
Multi-Unit direct prosthetic titanium screw
MM-S0330
Gold 20Ncm
Multi-Unit direct prosthetic gold screw
MM-G0330
length 3.7mm
Material:
Material:
Material:
Material:
Dimensions:
Dimensions:
Dimensions:
Dimensions:
Screw retained reconstruction
Multi Unit System.
Material:Dimensions:
Burn out plastic + gold -a
Multi-Unit direct goldMM-MG450
length 15mmBurn out plastic
Multi-Unit direct plastic cylinder
MM-CP045
length 10mmStainless steel
Multi-Unit abutment analog
MA-RSM10
length 12mm
Multi-Unit impression coping for closed tray
MM-IT450
length 11.7mm
Multi-Unit Ti temporary cylinder
Multi-Unit impression coping for open tray
MM-T0450
MM-I0450
length 10mm
Titanium 30-35Ncm
Titanium 30-35Ncm
Titanium 15 Ncm Titanium 25Ncm
Multi-Unit abutment
Height 1mm
MA-S1375
Titanium 30-35Ncm
Multi-Unit abutment
Height 2mm
MA-S2375
Titanium 30-35Ncm
Multi-Unit abutment
Height 3mm
MA-S3375
Titanium 30-35Ncm
Multi-Unit abutment
Height 4mm
MA-S4375
Wide platform. Multi-Unit abutment
Height 1mm
MA-W1500
Titanium 30-35Ncm
Wide platform. Multi-Unit abutment
Height 2mm
MA-W2500
Titanium 30-35Ncm
Wide platform. Multi-Unit abutment
Height 3mm
MA-W3500
Titanium 30-35Ncm
Wide platform. Multi-Unit abutment
Height 4mm
MA-W4500
Titanium
Multi-Unit 17 deg. angulated abutment with hex.
MA-ANH17
Titanium
MA-ANH30Multi-Unit 30 deg. angulated abutment with hex.
*
Patent Pending
length 3.7mm
Recommended tightening moment
* *
71.Reconstruction system
Bars.
Titanium
Gold - e Burn-out plastic
Plastic bar ovoid
Gold - e
Plastic bar ovoid
Gold - e
Titanium rider
Gold rider Plastic bar round
Plastic bar
Gold bar
Gold bar
Gold riderMM-TRU10
MM-TC100 MM-PC100
MM-PBU10
MM-GB100
MM-GBU10
MM-GRU10
height 2.6mmlength 50mm
height 2.5mmlength 3.5mm
Ø1.9mmlength 85mm
height 2.3mmlength 80mm
Ø1.9mmlength 50mm
height 2.3mmlength 50mm
height 2.75mmlength 50mm
Material:
Material:
Material:
Material:
Dimensions:
Dimensions:
Dimensions:
Dimensions:
Ovoid-shaped bar
Round bar
72.
h
SystemBall Attachment.
MaterialDimensions
Plasticheight 2.6mm
PlasticØ15mm
Titaniumheight 1mmheight 2mmheight 3mmheight 4mmheight 5mm
Ball attachment anchorMB-N1375MB-N2375MB-N3375MB-N4375MB-N5375
Titaniumheight 1mmheight 3mmheight 5mm
Wide platform ball attachment anchorMW-B1500MW-B3500MW-B5500
Stainless steellength 22mmBall attachment anchor keyMT-BK235
Plasticheight 3.5mmPlastic ball capMB-SF200
Gold - eheight 2.4mmGold ball capMB-GPS10
Stainless steelheight 3.2mmX 2
X 2
X 2
Stainless steellength 15.1mmBall attachment analogMB-RS375
Titaniumheight 10mmBall anchor 15 deg. Angulated abutmentMB-AN152
Titaniumheight 10mmBall anchor 25 deg. Angulated abutmentMB-AN252
UNO Narrow
Angulated Ball AttachmentPatent Pending
TitaniumUno Ball anchor screw 0.5mm MB-NR005
TitaniumUno Ball anchor screw 1.5mmMB-NR015
TitaniumUno Ball anchor screw 2.5mm MB-NR025
height 0.5mm
height 1.5mm
height 2.5mm
Plasticheight 2.6mmStandard plastic cap for metal housing
Optional capMB-PPC10
Soft plastic cap for metal housing
Plastic disc for ball attachment
Gold ball capMB-DMH10
MB-DB235
MB-PPR10
MB-MH100
73.
Plastic disc for ball attachmentMB-DMH10
MaterialDimensions
Titaniumheight 3.1mm
Plasticheight 2mm
Stainless steelheight 60mm
steelØ2.5mm
steelØ2.6mm
Titanium ball capMB-TTP10
Plastic mounting sleeveMB-PR010
Screw driver for titanium ball capMT-TSD10
Titanium ball cap spring standardMB-TBS10
Titanium ball cap spring softMB-TBS20
74.
h
h
x2
System
Locator Attachments.
Titanium nitrite coating
Locator Abutment MB-SZL00
height 0mm
Titanium nitrite coating
height 1.80mmsteelsteel / Titanium nitrite coating
Titanium nitrite coating
Titanium nitrite coating Titanium nitrite coating Titanium nitrite coating
Titanium nitrite coating Titanium nitrite coating
Titanium nitrite coating Titanium nitrite coating Titanium nitrite coating
Wide Locator Abutment
Locator Core Tool Locator Male Processing Pack-age - Pack of 2
Wide Locator Abutment Wide Locator Abutment Wide Locator Abutment
Wide Locator Abutment Wide Locator Abutment Wide Locator AbutmentMB-WZL00
MM-LCT10 MM-LMP02
MB-WZL04 MB-WZL05 MB-WZL06
MB-WZL01 MB-WZL02 MB-WZL03
height 0mm
height 4mm height 5mm height 6mm
height 1mm height 2mm height 3mm
Locator Abutment Locator Abutment Locator Abutment MB-SZL04 MB-SZL05 MB-SZL06
height 4mm height 5mm height 6mm
Titanium nitrite coating
Locator Abutment MB-SZL01
height 1mmTitanium nitrite coating
Locator Abutment MB-SZL02
height 2mmTitanium nitrite coating
Locator Abutment MB-SZL03
height 3mmMaterial:
Material:
Material:
Material:
Material:
Dimensions:
Dimensions:
Dimensions:
Dimensions:
Dimensions:
*Note: Locators should be ordered based on gingival height.
75.
Aluminum polyethylene
Locator Impression Coping - Pack of 4
MM-LIC10
length 4.50mm
Aluminum
Locator Female Analog - 4mm diam. - Pack of 4
MM-LFA40
Ø2.5mmlength 10.40mm
Aluminum
Locator Female Analog - 5mm diam. - Pack of 4
MM-LFA50
Ø5mmlength 10.40mm
Nylon
Locator Replacement Male clear - Pack of 40°-10°*, 5 lbs**, 2.27 kg
MM-LRM10
Ø4.7mmlength 1.80mm
Material:
Dimensions:
Nylon Pink
Locator Light Retention - Pack of 40°-10°*, 3 lbs**, 1.36 kg
MM-LLR10
Ø4.7mmlength 1.80mm
Nylon Blue
Locator Extra Light Retention - Pack of 40°-10°*, 1.5 lbs**, 0.68 kg
MM-LEL10
Ø4.7mmlength 1.80mm
Nylon Green
Locator Extended Range - Pack of 410°-20°*, 3-4 lbs**, 1.36-1.82 kg
MM-LER10
Ø4.7mmlength 1.80mm
Material:
Dimensions:
Nylon Red Polyethylene Black Polyethylene Black
Locator Extra Light Extended - Pack of 410°-20°*, 1.5 lbs**, 0.68 kg
Locator Parallel Post - Pack of 4
Locator Black Processing - Pack of 4
MM-LELE1 MM-LPP10 MM-LBP10
Ø4.7mmlength 1.80mm
Ø4.6mmlength 15mm
Ø4.6mmlength 1.80mm Material:
Dimensions:
Stainless steel Stainless steel
Locator Square Drive Torque Wrench Driver
Locator Square Drive Torque Wrench Driver
* = For the correction of the Axes divergences for one implant** = Retentions strength
MM-LSD15 MM-LSD21
length 15mm length 21mm
Material:
Dimensions:
76.
Prosthetic Options
MH-W3500MH-W4500MH-W5500
MW-RSM10
MW-RSM10
MW-I0470 MW-TPH50 MW-CPH13
MW-CPH60
MW-GPC10
MW-GP010MW-CP013
MW-CP060
MW-IT100
MM-MTP53
MW-IT200
MH-W3630MH-W4630MH-W5630
Sta
ndar
d
Sin
gle
toot
h /
Cro
wn
Ana
tom
ic
Brid
ge/B
ar
Direct Temporary Plastic Cylinder
Plastic Cylinder Gold-Plastic Cylinder
Analogs
Analogs Plastic Cylinder
Healing Caps
Healing Caps
ImpressionCoping
Prosthetic Abutment
Item descriptions on page 78
Wide Diameter- Screw retained reconstruction tableWide Platform.
77.cemented table
Wide Platform.
Prosthetic Options
Sta
ndar
d
Sin
gle
toot
h /
Cro
wn
Complete Prosthetic Abutment
Cementing Post Angulated Abutment
AnalogsHealing Caps
ImpressionCoping
MH-W3500MH-W4500MH-W5500
MW-CTP10
MW-MAC10
MW-AN151
MW-P0010
MW-P1510MW-WMAC1
MW-RSM10
MW-I0470 *MW-CPS01MW-CPS02MW-CPS03MW-CPS04
MW-APC49(Anti rotation)
*MW-CPC49
MW-TAD10MW-TAD20MW-TAD30MW-TAD40
Item descriptions on page 79*Note: The CPS includes these items
Ana
tom
ic
Brid
ge/B
ar
EW-CPH80
EW-CP080
MW-RSM10
MW-IT100
MM-MTP53
MW-IT200
MH-W3630MH-W4630MH-W5630
*
*
78.reconstruction table
Wide Platform Direct system.
MaterialDimensions
Burn-out plasticlength 13mmDirect plastic cylinder single tooth/crown with internal hexagon
MW-CPH13
Burn-out plasticlength 13mmDirect plastic cylinder bridge/bar without internal hexagon
MW-CP013
Plasticlength 14mmDirect temporary plastic cylinder internal hexagon
MW-TPH50
Plastic
Plastic
length 13mmØ6mm
length 13mmØ6mm
Direct plastic cylinder with hex. WP
Direct plastic cylinder without hex. WP
MW-CPH60
MW-CP060
Burn-out plastic + gold - a
length 18.20mmDirect gold - plastic abutment cylinder with hexagon
MW-GPC10
Burn-out plastic + gold - a
length 18.20mmDirect gold-plastic cylinder without hexagon
MW-GP010
Titaniumlength 6.90mm30 Ncm
Mini prosthetic screwMD-S0200
Titaniumlength 7.60mm30 Ncm
Direct prosthetic screwMD-S0220
Gold-slength 7.70mm20 Ncm
Direct gold prosthetic screwMD-G0220
Titaniumlength 12mm30 Ncm
Medium prosthetic screwMD-S0222
Titaniumlength 14mm30 Ncm
Long prosthetic screwMD-S0224
Note: all superstructure prices include the relevant screw.
79.
h
Cementedreconstruction table
Wide Platform Direct system.
MaterialDimensions
Titaniumlength 6.90mm30 Ncm
Titaniumlength 7.60mm30 Ncm
Gold-slength 7.70mm20 Ncm
Titaniumlength 12mm30 Ncm
Titaniumlength 14mm30 Ncm
Titaniumlength 11mm
Titaniumlength 11mm
Titaniumlength 11mm
Titanium
Titanium
length 11.50mm
length 13mmØ6mm
Titaniumlength 10.50mm
Burn-out plasticlength 8mm
Burn-out plasticlength 8mm
Titaniumheight 1mmheight 2mmheight 3mmheight 4mm
Mini prosthetic screwMD-S0200
Direct prosthetic screwMD-S0220
Direct gold prosthetic screwMD-G0220
Medium prosthetic screwMD-S0222
Long prosthetic screwMD-S0224
15° Wide Esthetic angulated abutmentMW-P1510
Wide Esthetic abutmentMW-P0010
15° Wide diameter angulated abutmentMW-AN151
Wide cementing postMW-MAC10
Wide narrow cemented postMW-CTP10
Wide burn out plastic capEW-CP080
Wide burn out anti-rotation plastic capEW-CPH80
Wide anatomic cementing transgingival abutment
MW-TAD10MW-TAD20MW-TAD30MW-TAD40
Wide platform cementing post MW-WMAC1
Note: all superstructure prices include the relevant screw.
80.
Accessories.
MIS offers technicians a range of innovative tools
that ease and simplify lab work, and help reach
higher accuracy in every case.
81.MK-DB01
Zircon Diamond Burr Set.
The Zircon Diamond Burr Set has been designed to enable easy grinding and
preparation of zircon abutments.
Diamond burr 2.10mmMT-F2121
Diamond burr 2.50mmMT-C3125
Diamond burr 1.80mmMT-B4018
Diamond burr 2.30mmMT-K2023
Diamond burr 2.20mm
Zircon Diamond Burr Set
MT-A4022
Kit Contents
82.
L
Prosthetic Instruments.
Stainless steel
Stainless steel Stainless steel
Stainless steelanodized aluminum
Stainless steel Stainless steel
Stainless steel
Technical hex. screwdriver
Ball attachment anchor key
Screw driver for titanium ball cap
Short hand screwdriver for 0.05" hex
Long hex. driver 0.05”
Int. connection abutment extractor
MT-HHR13
MT-HTS10 MT-BK235
MT-TSD10
MT-HDS30 MT-HDL30
MT-IE172
length 29mm
length 142.5mm length 22mm
length 50mm
length 16mm length 22mm
length 27mm
Stainless steel
Closed tray impression coping keyMT-IT100
length 16.5mm
Material:
Material:
Dimensions:
Dimensions:
Stainless steel
Allen key 0.05”MT-AL005
length 72mmMaterial:
Dimensions:
Stainless steel
Gingival depth measuring 2/4//6/8 mm
MT-GDM01
Stainless steel
Short motor key adapter 0.05” MT-SMK13
length 22mmStainless steel
Long motor key adapter 0.05”MT-LMK13
length 30mmMaterial:
Dimensions:
MT-HHR07
length 22mmStainless steel
Short screwdriver for 0.05" hex
Long hand screwdriver for 0.05" hex
83.MK-0001
Abutment Holding
System Kit.
Prosthetic Holder
This prosthetic holder provides an easy way to shape and grind ceramic and titanium abutments without damaging surrounding structures.
84.BS-4BS01
MIS 4BONE is a fully synthetic bone substitute made of fully synthesized HA & βTCP, (60% / 40% ratio) an interconnected micro and 70% macroporosity promotes the invasion of osteogenic cells by osteoconduction and allows biological fluid diffusion. The 4BONE contains optimized morphology and resorption properties that achieve predictable treatment outcomes. The unique packaging (syringe) has excellent wetting properties, that allows a simple approach to handling the product. The 4BONE offers the practitioner flexibility in a large range of oral regeneration procedures.
Background100% bone substitution. boasts the greatest clinical and fundamental literature review of 20 years of human and animal use of micro and macroporous biphasic calcium phosphate materials (4BONE ).
Architectural bone remodelingSpecific microstructure and macro structure represent a dynamic process, including physico-chemical processes, crystal/protein interactions, cell and tissue colonization and bone remodelling.
EasyEasy to handle. The granules of the 4BONE bone replacement substance easily absorb the patient’s blood or physiological solution in the syringe, which is then used to easily apply the substance to the implant site.
Safety100% Synthetic. No human or animal origin. 20 years of clinical studies have demonstrated efficiency, biocompatibility and safety of 4BONE bioceramic.
EfficiencyBioactive. 4BONE allows cell attachment, proliferation and cell invasion.
4BONE
85.
Packaging & Indications.the unique packaging of 4BONE in a syringe, offers the clinician an easy procedure of mixing the substance with the patient’s blood and/or saline water. After the blood and/or saline water is fully absorbed in the 4BONE , placing the substance in the patient’s mouth is simple to perform with the syringe.
MIS 4BONE is indicated for filling and\or augmenting intra oral\maxillofacial os-seous defects. The indications for using MIS 4BONE include bony dehiscences and fenestrations around dental implants. 4BONE is also very efficient in immediate implanting.
Facilitates architectural bone formation by providing an osteoconductive scaffolding. with a homogenous phase distribution that controls excessive resorption. 4BONE serves as a scaffold for bone deposition during the bone formation process. The mechanical stability of the augmentated volume is maintained as a result of the slow resorption rate of hydroxyapatite which prevents excessive resorption. Unlike other biphasic calcium phosphates, 4BONE is not only a mixture of HA and TCP, but is chemically synthesized as a composite, in order to ensure homogenous distribution of the two phases.4BONE is integrated during the natural remodelling process of the human bone, and is replaced by natural bony crystals similar to human bone.Effective bone regeneration, safety, and biocompatibility that have been clinically and scientifically proven for over 20 years in all areas of surgery.4BONE benefits from the largest scientific and clinical literature on the market since 1986 (500 publications).4BONE SBS is used for new therapeutic processes based on tissue engineering procedures (bone reconstruction in ir-radiated sites).
Easy procedure for mixing 4BONE with the patient ’s blood and/or saline water.
One functionBone resorption/substitution.
The 4BONE coms in an easy to use syringe:
Quantity: 0.5cc, 0.37grGranules’ size: 0.5-1.00 mm.
Easy procedure for mixing 4BONE with the patient ’s blood and/or saline water.
86.BS-4BS10, BS-4BS20
4BONE is a non structural bioactive bone graft substitute, which is resorbable and able
to be rapidly replaced by newly-formed bone. The 4BONE is a ceramic constituted
of two-phase of calcium phosphate 60 % hydroxyapatite and 40 % beta tricalcium
phosphate. The hydroxyapatite (HA) - Ca10(PO4)6(OH)2 is chemically comparable to
biological apatite crystals. Both in vitro and in vivo, chemically pure hydroxyapatite
is considered as the least bioactive of calcium phosphate ceramics. Beta tricalcium
phosphate (beta TCP) – Ca3(PO4)2 is recognized to have greater bioactivity, greater
extend of dissolution than HA in vitro and in vivo.
1cc/2cc.
The 4BONE SBS comes in two tubes quantities:BS-SBS10 - 1cc (0.6gr) granules size: 1-2mmBS-SBS20 - 2cc (1.2gr) granules size: 1-2mm
87.
Resorbable collagen membrane 4BONE-RCM is from highly purified collagen fibres type I and III derived from skin of porcine origin. 4BONE-RCM membrane is obtained by collagen cross linking using formaldehyde technology, and neutralized after. 4BONE-RCM membrane is fully resorbable eliminating the need for the second surgical procedure often required to remove a non resorbable membrane. Collagen is currently used for general and dental surgery as an absorbable haemostatic agent and absorbable wound dressing. A control process of collagen cross-linking provides 4BONE RCM Membrane its ability to function as a 4-6 month barrier.
BR-C1525, BR-C2030RCM
4BONE-RCM (Resorbable Collagen Membrane) Comes in two sizes: BR-C1525 - 15x25, BR-C2030 - 20x30
4BONE- Membrane
88.
MWH-M0131 (230V)
MWH-M0132 (115V)
The surgical micromotor has advanced functions for implantology, such as: programs, working steps and low speed with high torque.
Exclusive design, highly practicable and easily portable.
MIS-MCU Control Unit.
89.
Peformance is in line with all the most modern clinical developments in the dentistry field.
Accessories.
MWH-MMOTRMicromotor and cord kit
MWH-M7559Surgical contra-angle 20:1
MWH-1STUBOne way sterile tubes
Outstanding simplicity. All functions have a single key operation and are shown on a clearly visible display panel.
The Motor already offers familiar features: for example thetorque limitation for dental implantations (5-50 Ncm).And the wide speed range of 300-40,000 rpm.And a maintenance-free motor.And the integrated coolant pump.And of course with the implantmed you have a productthat not only meets but exceeds all quality requirements.
* Irrigation tubing is single use only and must be replaced after each use.
. Control Unit (Console)
. Foot Pedal Control
. Irrigation Support Rod
. Rubber Motor Support
. 3 Sterile Irrigation Tubes
. Power Cord (cord length 2m)
. MUC-MIS Control Unit User Manual
. Micromotor and cord kit
The MIS MCU core kit comes with:
Touch button surgical micromotor with a physiodispenser, electronic speed and torque control.
Complies with the most stringent safety requirements for medical equipment. The MIS-MCU is approved by the CE, FDA and manufactured under ISO 9001:2000 regulations.
90.The Crown Set.
With the Crown Set, you’ll immediately notice the ease of seating. The cement extrudes easily around the crown margins and within 90 seconds reaches the first stage of cure. With a coherent rubbery consistency during the first cure stage, removal of the material from the interproximal areas, sulcular tissues and undercuts, is quick and easy. As the material continues to cure,
it achieves a rigid set that easily retains the crown, yet can be simply removed if required. Crown set advanced resin chemistry; 2-stage setting and easy auto mix dispensing system make it ideal for cementing implant-retained crowns. The Crown Set can be auto mixed from a convenient 5 ml hand syringe.
Technical Specifications: Setting time Initial 90-120S Final 240-300SCompressive strength 35 MPa Flexural strength 28.1 MPa Flexural modulus 1500 Mpa
Film thickness 15 micron Water sorption <0.8 mg/cm3Water solubility <0.04 mg/cm3Linear shrinkage 2.5%
The Crown Set contains:1 Mixing padAutomix syringe 5ml10 Mixing tips
MK-0022
91. Material Compositions.
Application C, K L, G, K L, G, K L, K
Gold-eMaterial Ti-6AL-4V Gold-a Gold-s
Composition
Hardness
Legend: C–to bond K–resin L–soldering G–casting onto
Au %
Pt %
Ag %
Pd %
Cu %
Zn %
Ir %
Ti
C (max)
Fe (max)
O (max)
N (max)
H (max)
Al
V
Melting range C°
Soft annealing HV5
Hardened HV5
Soft C° / min
Hardened C° / min
-
-
-
-
-
-
-
Balanced
0.8
0.25
0.13
0.05
0.012
5.6-6.5
3.5-4.5
1604-1660
-
350-385
-
-
60
19
-
20
-
-
Balanced
-
-
-
-
-
-
-
-
1400-1490
145
240
100/30
700/30
61
12
16
-
9
Balanced
-
-
-
-
-
-
-
-
-
900-930
160
250
750/5
350/15
70
8.50
13.40
-
7.50
0.05
0.10
-
-
-
-
-
-
-
-
895-1010
170
295
750/5
450/15
92.
Index.
The index is arranged alphabetically
and in numeric order
93. Index.Alphabetic Order
Abutments
Anatomic cementing transgingival abutment
Anatomic cementing transgingival abutment wide dia
Angulated int. hex. Angulated int. hex. Angulated int. hex wide dia. EstheticEsthetic abutment Esthetic angulated Esthetic angulated Esthetic angulated Esthetic angulatedFriction fit cementing post switch platform, sp Multi-unit abutment
Multi-unit abutment wide dia.
Multi unit angulated abutment with hex.Multi unit angulated abutment with hex.Narrow cementing post Narrow cementing post wide dia. Standard cementing post int. hex Standard platform Zircon abutment Transgingival post
wide cementing post for standard diawide dia cementing post int. hex Wide esthetic Wide esthetic angulated Wide Transgingival post
676767677777777767/6967/6977/7967/6967/6967/6967/6967/6967/6967/697070707070707070707067/6977/7967/6967/6967/6967/6967/6967/6967/6977/7977/7977/7977/7977/7977/7977/79
1mm2mm3mm4mm1mm2mm3mm4mm15º25º15º
15º25º15º25º13mm1mm2mm3mm4mm1mm2mm3mm4mm17º30º
1mm2mm3mm4mm
15º1mm2mm3mm4mm
MD-CPS01MD-CPS02MD-CPS03MD-CPS04MW-CPS01MW-CPS02MW-CPS03MW-CPS04MD-AN151MD-AN251MW-AN151MD-P0030MD-A0010MD-A1510MD-A2510MD-P1530MD-P2530MD-MACF1MA-S1375MA-S2375MA-S3375MA-S4375MA-W1500MA-W2500MA-W3500MA-W4500MA-ANH17MA-ANH30MD-CTP10MW-CTP10MD-MAC10MD-CR010MD-TAD10MD-TAD20MD-TAD30MD-TAD40MD-WMAC1MW-MAC10MW-P0010MW-P1510MW-TAD10MW-TAD20MW-TAD30MW-TAD40
Size Cat. No. Page
A
94.
Analogs
Abutment analog Abutment analog Wide diaBall attachment int. hex Implant analog int. hexWide dia. Implant analog int. hexUNO one piece analogMulti unit abutment analog Ball
Attachment int. hex
Attachment int. hex. wide dia
Ball anchor angulated abutment Ball anchor angulated abutment Cap gold Double metal housing Plastic ball cap Plastic mount sleeve Plastic pink Plastic soft disc Standard plastic cap for metal housing Titanium ball cap Titanium ball cap spring softזז Titanium ball cap spring standardGold ball capUno Ball anchor screw
Bar
Multi-unit bar gold coping Ovoid
Round
59597257/66/67575770/76-77
727272727272727272727272727372727273737372
727272
7071717171717171
1mm2mm3mm4mm5mm1mm3mm5mm15º25º
3.2mm
0.5mm0.15mm0.25mm
MD-RSM48MW-RSM48MB-RS375MD-RSM10MW-RSM10MO1-RSA10MA-RSM10
MB-N1375MB-N2375MB-N3375MB-N4375MB-N5375MW-B1500MW-B3500MW-B5500MB-AN152MB-AN252MB-GPS10MB-DMH10MB-SF200MB-PR010MB-PPR10MB-DB235MB-PPC10MB-TTP10MB-TBS20MB-TBS10MB-MH100
MB-NR005MB-NR015MB-NR025
MM-BGC45MM-GBU10MM-GRU10MM-PBU10MM-TRU10MM-GB100MM-PC100MM-TC100
Size Cat. No. Page
B
Index.Alphabetic Order
95.
Drills
Ceramic drills - marking Ceramic drills - pilot Ceramic drills - twist Countersink Countersink External irrigation marking External irrigation pilot External irrigation twist External irrigation twist External irrigation twist External irrigation twist External irrigation twist External irrigation twist External irrigation twist External irrigation twist Internal irrigation twist drill shortInternal irrigation twist drill longInternal irrigation twist drill longInternal irrigation twist drill longInternal irrigation twist drill long Internal irrigation twist drill shortInternal irrigation twist drill longInternal irrigation twist drill shortInternal irrigation twist drill shortInternal irrigation twist drill longInternal irrigation twist drill shortInternal irrigation twist drill longInternal irrigation twist drill shortMarkingPilot long Pilot short Spade marking drill
Healing Caps
Anatomic int. hex
Healing cap Healing cap wide dia Multi-unit Standard int. hex
313131282830303030303030303030282828282828282828282828282828282830
12/18/66/6712/18/66/6712/18/66/6712/18/66/6759597012/18/66/6712/18/66/67
2.10mm2mm2.80mm2.70/3.754.50mm1.9mm2mm2.80mm3mm3.20mm3.50mm3.80mm4.50mm5mm5.50mm2.80mm3.20mm3.80mm4.50mm2.80mm3mm3.20mm3.50mm3.80mm4.50mm5mm5mm5.50mm5.50mm1.90mm2mm2mm
MT-CRD21MT-CRD20MT-CRD28MT-GDN33MT-GDN50MT-TDN19MT-TDN20MT-TDN28MT-TDN30MT-TDN32MT-TDN35MT-TDN38MT-TDN50MT-TDN55MT-TDN45MT-TDS28MT-TD320MT-TD380MT-TD450MT-TD280MT-TD300MT-TDS32MT-TD350MT-TDS38MT-TDS45MT-TD500MT-TDS50MT-TD550MT-TDS55MT-TD110MT-TD200MT-TDS20MT-SMD10
MH-53375MH-54375MH-55375MH-56375MM-CHC55MW-CHC55MH-00450MH-03375MH-04375
Size Cat. No. Page
D
H
Index.Alphabetic Order
96.
Wide dia. anatomic
Wide dia. standard
Impression Coping
Impression coping plastic cap Direct impression coping Direct impression coping - wide diaDirect Impression coping for closed tray Direct Impression coping for closed tray - wide diaDirect Impression coping for closed tray Int. Hex Wide direct Impression coping for closed . tray Int. HexDirect impression coping guide pin internal hexGuide pin Multi unit impression coping for closed trayMulti unit impression coping for closed tray Press fit - wide dia
Implants
UNO One Piece Implant
Ø 3mm
Ø 3.50mm
UNO Narrow Implant
BioCom screw type int. hex Ø 3.30mm
Ø 3.75mm
12/18/66/6712/18/66/6712/18/76/7712/18/76/7712/18/76/7712/18/76/7712/18/76/7712/18/76/77
59/66/67/76/7756/66/6756/76/7756/66/6756/76/7756/66/6756/76/7756567070575757
8-98-98-98-98/108/108/108/108/118/118/118/11
12-1312-1312-1312-1312/1412/1412/14
10mm11.5mm13mm16mm10mm11.5mm13mm16mm10mm11.5mm13mm16mm
10mm11.5mm13mm16mm8mm10mm11.5mm
MH-05375MH-06375MH-W3630MH-W4630MH-W5630MH-W3500MH-W4500MH-W5500
MM-MTP53MD-I0375MW-I0470MD-IT200MW-IT200MD-IT100MW-IT100MD-GP100MD-G0213MM-IT450MM-I0450MD-PF375MW-PF550MM-OUP01
MO1-10300MO1-11300MO1-13300MO1-16300MO1-10350MO1-11350MO1-13350MO1-16350MO2-10300MO2-11300MO2-13300MO2-16300
MF4-10330MF4-11330MF4-13330MF4-16330MF4-08375MF4-10375MF4-11375
Size Cat. No. Page
I
Index.Alphabetic Order
97.
Ø 4.20mm
Ø5mm
Ø6mm
Seven screw type int. hex
Ø3.75mm
Ø4.20mm
Ø 5mm
Ø 6mm
Locator Attachments System
Wide Locator 3.75mm - 4.20mm int. hex
12/1412/1412/1512/1512/1512/1512/1512/1612/1612/1612/1612/1612/1712/1712/1712/17
18-1918-1918-1918-1918-1918/2018/2018/2018/2018/2018/2118/2118/2118/2118/2118/2218/2218/2218/22
747474747474
13mm16mm8mm10mm11.5mm13mm16mm8mm10mm11.5mm13mm16mm8mm10mm11.5mm13mm
8mm10mm11.5mm13mm16mm8mm10mm11.5mm13mm16mm8mm10mm11.5mm13mm16mm8mm10mm11.5mm13mm
0mm1mm2mm3mm4mm5mm
MF4-13375MF4-16375MF4-08420MF4-10420MF4-11420MF4-13420MF4-16420MF4-08500MF4-10500MF4-11500MF4-13500MF4-16500MF4-08600MF4-10600MF4-11600MF4-13600
MF7-08375MF7-10375MF7-11375MF7-13375MF7-16375MF7-08420MF7-10420MF7-11420MF7-13420MF7-16420MF7-08500MF7-10500MF7-11500MF7-13500MF7-16500MF7-08600MF7-10600MF7-11600MF7-13600
MB-WZL00MB-WZL01MB-WZL02MB-WZL03MB-WZL04MB-WZL05
Size Cat. No. Page
L
Index.Alphabetic Order
98.
Locator black processing Locator Core Tool Locator extended range Locator extra light extended Locator extra light retention Locator Female analog Locator Female analog Locator for 3.75mm -4.20mm int. hex
Locator Impression coping Locator Light retention Locator Male Processing Pack Locator parallel post Locator Replacement Locator Square Drive Torque Locator Square Drive Torque
Plastic Cap
Burn out Burn out anti-rotation Burn out anti-rotation Burn out - Wide dia Burn out plastic capBurn out plastic cap-wideBurn out anti-rotation plastic cap Burn out anti-rotation plastic cap-wide
Plastic Cylinder
Direct gold -plastic abutment cylinder with hexDirect gold -plastic abutment cylinder without hex Multi-unit direct gold Direct plastic cylinder. with hexDirect plastic cylinder. without hex Direct gold plastic cylinder without hexGold plastic cylinder wide dia. with hex Multi-unit direct plastic cylinder Plastic cylinder. With hexPlastic cylinder. without hex
74757475757575757474747474747475757475757575
59/6759/7759/6759/7767/697967/6979
66/6876/787066/6866/6866/6876/787076/7876/78
6mm
0mm1mm2mm3mm4mm5mm6mm
MB-WZL06MM-LBP10MM-LCT10MM-LER10MM-LELE1MM-LEL10MM-LFA40MM-LFA50MB-SZL00MB-SZL01MB-SZL02MB-SZL03MB-SZL04MB-SZL05MB-SZL06MM-LIC10MM-LLR10MM-LMP02MM-LPP10MM-LRM10MM-LSD15MM-LSD21
MM-CPC49MW-CPC49MM-APC49MW-APC49ED-CP080EW-CP080ED-CPH80EW-CPH80
MD-GPC10MW-GP010MM-MG450MD-CPH13MD-CP013MD-GP010MW-GPC10MM-CP045MW-CPH13MW-CP013
Size Cat. No. Page
P
Index.Alphabetic Order
99.
Direct plastic cylinder with hex. WPDirect plastic cylinder without hex. WP Wide profile direct Plastic cylinder with hexWide profile direct Plastic cylinder without hex Screws
Cover screw int. hex Cover screw int. hex. wide dia Direct prosthetic screw Direct gold prosthetic screw Long prosthetic screw Medium prosthetic screw Mini prosthetic screw Multi-unit direct prosthetic gold screw Multi-unit direct prosthetic titanium screw
Screwdriver
Allen key Ball attachment anchor key Closed tray impression coping keyGingival depth measuring Hand hex. Driver Hand hex. Driver Implant site depth probe Implant direct indicatorScrew drive for titanium ball cap Technical hexMulti unit key
Set
4Bone 4Bone 1cc4Bone 2cc 4Bone -RCM
Abrahami Drill Guide Kit Alveolar Ridge Expanding Osteotomes Bone Compression Kit Complete prosthetic set
Complete prosthetic set Wide dia
76/7876/7866/6866/68
12/1812/1868/69/78/7959/68/69/78/7968-69/78-7968-69/78-7968-69/78-797070
8272/8282828282353573/828270
84-858686878744-455346-4758-5958-5958-5958-5958-5958-59
4mm
0.05"
0.05"0.05"
MWCPH60MW-CP060MD-CPH50MD-CP050
MC1-00375MC1-00470MD-S0220MD-G0220MD-S0224MD-S0222MD-S0200MM-G0330MM-S0330
MT-AL005MT-BK235MT-IT100MT-GDM01MT-HHR13MT-HHR07MT-BTI10MT-DI001MT-TSD10MT-HTS10MT-MUK02
BS-4BS01BS-4BS10BS-4BS20BR-C1525BR-C2030MK-0011MK-0023MK-0020MK-CPS01MK-CPS02MK-CPS03MK-CPS04MK-WCPS1MK-WCPS2
Size Cat. No. Page
S
Index.Alphabetic Order
100.
Convex Osteotomes SetCrown set Crest Widener KitDrill Stopper Kits
Abutment Holder System Zircon diamond burr set MCU-MIS Control Unit Osteotomes Set RA Technical KitRA Gold Base Kit- standard platformRA Gold Base Kit- wide for standard platformRA Plastic Base Kit- standard platformRA Plastic Base Kit- wide for standard platformSurgical Instruments Kit Surgical Instruments Kit -External irrigation Surgical Instruments Kit - Internal irrigation The Basic Kit The Organizer Kit UNO Implant Surgical KitYeung Bone Harvest Kit
Temporary Cylinders
Direct titanium with hexMulti unit Titanium temporary cylinderPlastic with hexWide
Thread Forms
Thread Forms Short Thread Forms Long Thread Forms Short Thread Forms Long Thread Forms Short Thread Forms Long Thread Forms Short Thread Forms Long Thread Forms Short Thread Forms Long
58-5958-59519042-434040404040838188-895260-6162-6362-6364-6564-6538-3938-3938-39505048-4941
66/687066/6876/78
33333333333333333333
3.30mm3.30mm3.75mm3.75mm4.20mm4.20mm5mm5mm6mm6mm
MK-WCPS3MK-WCPS4MK-0024MK-0022MK-CW28MK-STO20MK-STO28MK-STO32MK-STO38MK-STO45MK-0001MK-DB01MWH-M0131/2MK-0002MK-RADT1MK-RAGS1MK-RAGW1MK-RAPS1MK-RAPW1MK-0035MK-EI35MK-IR35MK-0014MK-0012MK-0036MK-BH26
MD-TCH13MM-T0450MD-TPH50MW-TPH50
MT-TNS33MT-TNL33MT-TNS37MT-TNL37MT-TNS42MT-TNL42MT-TNS50MT-TNL50MT-TNS60MT-TNL60
Size Cat. No. Page
T
Index.Alphabetic Order
101.
Tools
Body Try
Drill extender Hammer solid plastic insert Hand wrench Hex.Drive long Hex.Drive shortHolding abutment mount key Hex. Ratchet long adapter for int. hex connectionHex. Ratchet short adapter for int. hex connectionHex. Hand key for int. hex connectionHolding mount key Motor key adapter 0.05" long Motor key adapter 0.05" short Parallel pin Ratchet Surgical adapter driver Short ratchet adapter for Narrow implantLong ratchet adapter for Narrow implantShort motor adapter for int. hex. ConnectionLong motor adapter for int. hex. ConnectionThread form adapter Uno one piece implant short keyUno one piece implant insertion toolUno one piece implant motor adapter, longUno one piece implant motor adapter, shortUno one piece implant long keyTissue punch Torque wrench Trephine Burrs
Hand key Trephine
3535353535353534353434/8234/823534343434/8234/8234353533333434353333333333353535
32323232
2mm2.80mm3.20mm3.80mm4.50mm5mm5.50mm
75mm
20mm30mm22mm
4mm5mm6mm
MT-BT020MT-BT028MT-BT032MT-BT038MT-BT045MT-BT050MT-BT055MT-DE001MT-MAL10MT-HW001MT-HDL30MT-HDS30CT-HCK01MT-MRH20MT-MRH10MT-HHK24MT-LMK13MT-SMK13MT-PP001MT-RI030MT-MSD20MT-HRS27MT-HRL27MT-MMH10MT-MMH20MT-TFA01MT-HKS15MT-HKL21MT-HKO21MT-UML21MT-UMS21MT-TP500MT-TP420MT-RI040
MT-HTR10MT-00400MT-00500MT-00600
Size Cat. No. Page
Index.Alphabetic Order
102.
BR-C1525
BR-C2030
BS-4BS01
BS-4BS10
BS-4BS20
CT-HCK01
ED-CP080
ED-CPH80
EW-CP080
EW-CPH80
MA-ANH17
MA-ANH30
MA-RSM10
MA-S1375
MA-W1500
MA-S2375
MA-W2500
MA-S3375
MA-W3500
MA-S4375
MA-W4500
MB-AN152
MB-AN252
MB-DB235
MB-DMH10
MB-GPS10
MB-MH100
MB-N1375
MB-N2375
MB-N3375
MB-N4375
MB-N5375
MB-NR005
MB-NR015
MB-NR025
MB-PPC10
MB-PPR10
MB-PR010
MB-RS375
MB-SF200
MB-SZL00
MB-SZL01
MB-SZL02
MB-SZL03
MB-SZL04
MB-SZL05
MB-SZL06
MB-TBS10
MB-TBS20
MB-TTP10
MB-WZL00
MB-WZL01
MB-WZL02
MB-WZL03
MB-WZL04
MB-WZL05
MB-WZL06
MC1-00375
MC1-00470
MD-A0010
MD-A1510
MD-A2510
MD-AN151
MD-AN251
MD-CP013
MD-CPH13
MD-CPH50
MD-CP050
MD-CPS01
MD-CPS02
MD-CPS03
MD-CPS04
MD-CR010
MD-CTP10
MD-G0213
MD-G0220
MD-GP010
MD-GP100
MD-GPC10
MD-GP010
MD-I0375
MD-IT100
MD-IT200
MD-MAC10
MD-MACF1
MD-P0030
MD-P1530
MD-P2530
MD-PF375
MD-RSM10
MD-RSM48
MD-S0200
MD-S0220
MD-S0222
MD-S0224
MD-TAD10
MD-TAD20
MD-TAD30
MD-TAD40
MD-TCH13
MD-TPH50
MD-WMAC1
MF4-08375
MF4-08420
MF4-08500
MF4-08600
MF4-10330
MF4-10375
MF4-10420
MF4-10500
MF4-10600
73
72
72
74
74
74
74
74
74
74
73
73
73
74
74
74
74
74
74
74
12-18
12-18
67-69
67-69
67-69
67-69
67-69
66-68
66-68
66-68
66-68
67
67
67
67
67-69
67-69
56
59/68-69/78-79
76-78
56
66-68
66-68
67
56/66-67
56/66-67
67-69
67/69
67/69
67/69
67/69
57
57/66/67
59
68-69/78-79
68-69/78-79
68-69/78-79
68-69/78-79
67/69
67/69
67/69
67/69
66/68
66/68
67/69
12/14
12/15
12/16
12/17
12-13
12/14
12/15
12/16
12/17
87
87
84-85
86
86
35
67/69
67/69
77/79
77/79
70
70
70/76-77
70
70
70
70
70
70
70
70
72
72
72
72
72
72
72
72
72
72
72
72
72
72
72
72
Index.Numeric Order
Cat. No. Cat. No. Cat. No.Page Page Page
103.
MF4-11330
MF4-11375
MF4-11420
MF4-11500
MF4-11600
MF4-13330
MF4-13375
MF4-13420
MF4-13500
MF4-13600
MF4-16330
MF4-16375
MF4-16420
MF4-16500
MF7-08375
MF7-08420
MF7-08500
MF7-08600
MF7-10375
MF7-10420
MF7-10500
MF7-10600
MF7-11375
MF7-11420
MF7-11500
MF7-11600
MF7-13375
MF7-13420
MF7-13500
MF7-13600
MF7-16375
MF7-16420
MF7-16500
MH-00450
MH-03375
MH-04375
MH-05375
MH-06375
MH-53375
MH-54375
MH-55375
MH-56375
MH-W3500
MH-W3630
MH-W4500
MH-W4630
MH-W5500
MH-W5630
MK-0001
MK-0002
MK-0011
MK-0012
MK-0014
MK-0020
MK-0022
MK-0023
MK-0024
MK-0035
MK-0036
MK-BH26
MK-CPS01
MK-CPS02
MK-CPS03
MK-CPS04
MK-CW28
MK-DB01
MK-EI35
MK-IR35
MK-RADT1
MK-RAGS1
MK-RAGW1
MK-RAPS1
MK-RAPW1
MK-ST020
MK-ST028
MK-ST032
MK-ST038
MK-ST045
MK-WCPS1
MK-WCPS2
MK-WCPS3
MK-WCPS4
MM-APC49
MM-BGC45
MM-CHC55
MM-CP045
MM-CPC49
MM-G0330
MM-GB100
MM-GBU10
MM-GRU10
MM-I0450
MM-IT450
MM-LBP10
MM-LCT10
MM-LEL10
MM-LELE1
MM-LER10
MM-LFA40
MM-LFA50
MM-LIC10
MM-LLR10
MM-LMP02
MM-LPP10
MM-LRM10
MM-LSD15
MM-LSD21
MM-MG450
MM-MTP53
MM-OUP01
MM-PBU10
40
40
40
40
58-59
58-59
58-59
58-59
59/67
70
59
70
59/67
70
71
71
71
70
70
75
74
75
75
75
75
75
75
75
74
75
75
75
75
70
59/66-67/76-77
57
71
12-13
12/14
12/15
12/16
12/17
12/13
12/14
12/15
12/16
12/17
12-13
12/14
12/15
12/16
18-19
18/20
18/21
18/22
18-19
18/20
18/21
18/22
18-19
18/20
18/21
18/22
18-19
18/20
18/21
18/22
18-19
18/20
18/21
70
12-18-66-67
12-18-66-67
12-18-66-67
12-18-66-67
12-18-66-67
12-18-66-67
12-18-66-67
12-18-66-67
12-18-76-77
12-18-76-77
12-18-76-77
12-18-76-77
12-18-76-77
12-18-76-77
83
52
44-45
50
50
46-47
90
53
51
38-39
48-49
41
58-59
58-59
58-59
58-59
42-43
81
38-39
38-39
60-61
62-63
62-63
64-65
64-65
40
Index.Numeric Order
Cat. No. Cat. No. Cat. No.Page Page Page
104.
71
70
70
71
71
8-9
8/10
8-9
8/10
8-9
8/10
8-9
8/10
57
8/11
8/11
8-11
8/11
32
32
32
82
72-82
35
35
35
35
35
35
35
35
31
31
31
34
35
82
28
28
34/82
34/82
34
82
82
33
33
33
33
33
32
82
34
82
34-82
35
34
34
34
34
35
70
34
35
35
30
34-82
28
28
28
28
28
28
28
28
28
28
30
30
30
30
30
30
30
30
30
30
28
28
28
28
28
28
28
35
33
33
33
33
33
33
33
33
33
33
35
35
73/82
33
33
77/79
59/77
72
72
72
59
76/78
76/78
59/77
76-78
76/78
77
77
77
77
77-79
76/78
76-78
88-89
56/76-77
56-76-77
56-76-77
56
77-79
77-79
77-79
57
57
59
77-79
77-79
77-79
77-79
76-78
77/79
MM-PC100
MM-S0330
MM-T0450
MM-TC100
MM-TRU10
MO1-10300
MO1-10350
MO1-11300
MO1-11350
MO1-13300
MO1-13350
MO1-16300
MO1-16350
MO1-RSA10
MO2-10300
MO2-11300
MO2-13300
MO2-16300
MT-00400
MT-00500
MT-00600
MT-AL005
MT-BK235
MT-BT020
MT-BT028
MT-BT032
MT-BT038
MT-BT045
MT-BT050
MT-BT055
MT-BTI10
MT-CRD20
MT-CRD21
MT-CRD28
MT-DE001
MT-DI001
MT-GDM01
MT-GDN33
MT-GDN50
MT-HDL30
MT-HDS30
MT-HHK24
MT-HHR07
MT-HHR13
MT-HKL21
MT-HKO21
MT-HKS15
MT-HRL27
MT-HRS27
MT-HTR10
MT-HTS10
MT-HW001
MT-IT100
MT-LMK13
MT-MAL10
MT-MMH10
MT-MMH20
MT-MRH10
MT-MRH20
MT-MSD20
MT-MUK02
MT-PP001
MT-RI030
MT-RI040
MT-SMD10
MT-SMK13
MT-TD110
MT-TD200
MT-TD280
MT-TD300
MT-TD320
MT-TD350
MT-TD380
MT-TD450
MT-TD500
MT-TD550
MT-TDN19
MT-TDN20
MT-TDN28
MT-TDN30
MT-TDN32
MT-TDN35
MT-TDN38
MT-TDN45
MT-TDN50
MT-TDN55
MT-TDS20
MT-TDS28
MT-TDS32
MT-TDS38
MT-TDS45
MT-TDS50
MT-TDS55
MT-TFA01
MT-TNL33
MT-TNL37
MT-TNL42
MT-TNL50
MT-TNL60
MT-TNS33
MT-TNS37
MT-TNS42
MT-TNS50
MT-TNS60
MT-TP420
MT-TP500
MT-TSD10
MT-UML21
MT-UMS21
MW-AN151
MW-APC49
MW-B1500
MW-B3500
MW-B5500
MW-CHC55
MW-CP013
MW-CP060
MW-CPC49
MW-CPH13
MW-CPH60
MW-CPS01
MW-CPS02
MW-CPS03
MW-CPS04
MW-CTP10
MWGP010
MW-GPC10
MWH-M0131/2
MW-I0470
MW-IC200
MW-IT100
MW-IT200
MW-MAC10
MW-P0010
MW-P1510
MW-PF550
MW-RSM10
MW-RSM48
MW-TAD10
MW-TAD20
MW-TAD30
MW-TAD40
MW-TPH50
MW-WMAC1
Index.Numeric Order
Cat. No. Cat. No. Cat. No. Cat. No.Page Page Page Page
105.
MD-A0010 MD-P0030
MD-MAC10MD-WMAC1
MD-P1530MD-P2530
MD-AN151MD-AN251
MD-GPC10MD-GP010
MD-CR010MD-CTP10MD-A1510MD-A2510
Catalog Number
MD-TAD10MD-TAD20MD-TAD30MD-TAD40
MD-CPS01MD-CPS02MD-CPS03MD-CPS04
Direct cementing transgingival post
Cementing abutment
Esthetic abutment
Esthetic angulated abutment
Angulated abutment
Gold abutmentCeramic - Zro2 abutment
Esthetic angulated abutment
Abutment description
Direct conical titanium post
Anatomic transgingival abutment
Premolars and Molars
Horizontal gingiva level
Crown/Implant angulation up to 4 degrees
Buccal-low levelPalatal-high level
Crown/Implant angulation up to 4 degrees
Horizontal gingiva level
Crown/Implant angulation up to 4 degrees
According to gingival heightavailable in heights of 1,2,3,4mm
Up to 4mm buccal Up to 6mm lingual/Palatal
Acording to gingival height available in heights of 1,2,3,4mm
Grinding the abutment shoulder to meet the gingival contour
Crown axis parallel to implant axis
Buccal-low levelLingual-high level
Crown/Implant angulation between 15-25 degrees
Grinding the abutment to meet the gingival height
Up to 4mm buccal Up to 6mm lingual/Palatal
Canine, Premolars& Molars
Incisors to Molars
Incisors to Premolars
Buccal-low levelLingual-high level
Crown/Implant angulation between 15-25 degrees
Any gingival profile
Crown axis parallel to implant axis
Buccal-low levelPalatal-high level
Crown/Implant angulation up to 4 degrees
Up to 2 mm buccalUp to 4 mm lingual
Up to 2 mm buccalUp to 4 mm lingual
Up to 4mm buccal Up to 6mm lingual/Palatal
Anterior Mandible
Horizontal gingival level
Crown axis parallel to implant axis
Very low gingival height
Anterior Maxilla
Gingival Height
GingivalProfile
Crown Implant Inclination Ratio
Location
Buccal-low levelPalatal-high level
Crown/Implant angulation between 15-25 degrees
Up to 2mm buccal Up to 4mm lingual/Palatal
Indications for Using MIS Restorative Components* For recommendation purpose
Restorative components.
Table
106.
All rights reserved. No part of this publ icat ion may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher.
MIS’s Quality System complies with international quality control standards: ISO 13485:2003 - Quality Management System for Medical Devices, ISO 9001: 2000 – Quality Management System and CE Directive for Medical Devices 93/42/EEC. MIS’s products are cleared for marketing in the USA and CE approved.
MIS Corporation. All rights Reserved.
MC-CIH06 Rev. 4
MIS Implants Technologies Ltd.www.mis-implants.com
®