Division of Finance and Business Operations

Procurement & Strategic Sourcing 5700 Cass Avenue, suite 4200 Detroit, Michigan 48202 (313) 577-3734 FAX (313) 577-3747

May 4, 2015

Addendum #2 To Request for Proposal

For Fountain Court Renovation: Project 999-222859

Dated April 23, 2015

As a result of the Mandatory Pre-proposal Meeting April 29, 2015, the following question was submitted for clarification. The question and the University’s response is as follows: Question: Are we to assume, that the complete specification section 131200 Water Features (Fountain specification) is covered under Allowance No. (2) for a total of $50,000; in which this allowance would cover a complete “Turn Key” fountain work including but not limited to: inspection, recommendation report, design, engineering, testing, labor, material cost, receiving, handling, installation and contractor overhead & profit, Etc. ? Response: Yes, except for the storm sewer and power service as indicated in the bid documents. This Addendum also includes product literature related. The Addendum must be acknowledged on your lump sum bid. IMPORTANT – PLEASE NOTE: Effective December 1, 2007, bid notices will be sent only to those Vendors registered to receive them via our Bid Opportunities Listserve service. To register, to http://www.forms.procurement.wayne.edu/Adv_bid/Adv_bid.html, and click on the “Join our Listserve” link at the top of the page. Instructions are at the top of the page, and the Construction Listserv service is under “Construction Bid Opportunities”. NOTE: You must have attended a pre-bid conference in order to be eligible to bid on a particular project. Receipt of minutes or addenda without being at a pre-bid conference does not qualify your company to bid. There have been alternates added to the package. You will find a new Form of Proposal below. A copy of this Addendum will be posted to the Purchasing web site at http://www.forms.procurement.wayne.edu/Adv_bid/Adv_bid.html. As a reminder, the bid due date is May 6, 2015, at 2:00 pm. If you have any further questions, please do not hesitate to email them to me at ac9934@wayne.edu and copy rfpteam1@wayne.edu. Thank you, Kimberly Tomaszewski, Buyer

Mechanical

Electrical Energy Management

Communication Technologies Architectural Lighting Design

Commissioning

5145 Livernois, Suite 100 2001 Commonwealth Blvd., Ste. 203 Troy, MI 48098-3276 Ann Arbor, MI 48105 Tel: 248-879-5666 Tel: 734-913-4749 Fax: 248-879-0007 Fax: 734-913-4957

www.PeterBassoAssociates.com

ADDENDUM

Project Name: Wayne State University Fountain Court Renovation WSU Project 999-222859

PBA Project Number: 2015.0042

Addendum Number: 2

Date: 5/4/2015

Each Bidder’s proposal shall include the work described herein. Unless otherwise indicated, the work described herein shall comply with, and be equal in all respects to, the original Specifications and the Drawings accompanying same. Include incidental work required to properly complete the work, whether stated herein or not. Specifications Issued: 265100A lighting fixture product data sheets Electrical Specifications Items: Electrical Specification Items: Item No. 1: Added approved alternate manufactures to fixtures and poles.

G:\2015\2015-0042-00\Clerical\Addendum Writeups\Addendum 2\Addendum 2.docx

MSA MESA LED

1-6 LightBARs

Solid State LED

DECORATIVE LUMINAIRE

INVUE®

SPECIFICATION FEATURES

ConstructionHOUSING: Die-cast aluminum main housing and spider mount base maintain a minimum 0.125 wall thickness. Integral aluminum heat sink provides superior thermal heat transfer in +40°C ambient environments. DOOR ASSEMBLY: Top mounted, heavy wall, die-cast aluminum door maintains a nominal 0.125 thickness. Door includes a self-retaining interior hinge. GASKET: Continuous silicone gasket provided to seal housing door assembly and optic tray. LENS: Downlight lens is LED board integrated acrylic over-optics, each individually sealed for IP66 rating. HARDWARE: Four iinset fasteners on underside of housing provide access to luminaire interior. Concealed, stainless steel four bar hinge lock allows door to lock in the open position.

OpticsDISTRIBUTION: Choice of twelve patented, high-efficiency AccuLED Optics™, featuring designs that maximize light collection and directional distribution onto the application region. Each optical lens is precision manufactured via injection-molding then precisely arranged and sealed on the board

media. LEDs: High output LEDs, 60,000+ hours life at >90% lumen maintenance, offered standard in 4000°K (+/- 275K) CCT and nominal 70 CRI. Mesa LightBAR optic tray is removable and able to rotate 360° in 90° increments for specific placement of the distribution relative to fixture.

ElectricalDRIVER: LED drivers are potted and heat sunk for optimal performance and prolonged life. Standard drivers feature electronic universal voltage (120-277V/50-60Hz), greater than 0.9 power factor, less than 20% harmonic distortion and feature ambient temperature range of +40°C (104°F) down to minimum starting temperature of -30°C (-22°F). Shipped standard with Cooper Lighting proprietary circuit module designed to withstand 10kV of transient line surge. All LED LightBARs™ and drivers are mounted to dedicated mounting trays and are easily replaced by use of quick disconnects for ease of wiring. Driver tray is removable without the use of tools. Options to control light levels, energy savings and egress capabilities (battery pack and separate circuit) are available.

MountingFitter assembly mounts over 3” O.D. tenon and is secured via three concealed stainless steel set screws. Design of fitter provides seamless transition to 4” round poles. Additional mounting accessories include a dual fixture post top mounting arm and wall mount arm.

FinishHousing is finished in five-stage super TGIC polyester powder coat paint, 2.5 mil nominal thickness for superior protection against fade and wear. LightBAR™ cover plates are standard white and may be specified to match finish of luminaire housing. Standard colors include black, bronze, grey, white, dark platinum and graphite metallic. RAL and custom color matches available. Consult Outdoor Architectural Colors brochure for a complete selection.

WarrantyFive-year warranty.

AVU0920722015-01-08 13:22:43

The geometric form of MESA LED luminaire allows it to adapt to either contemporary or traditional architectural settings. Available in single or twin pole mount configurations with optional wall mounting capability, the MESA LED luminaire's mounting options allow for harmonized site design whether at the entryway or in the parking lot. UL/cUL listed for use in wet locations.

DESCRIPTION

S

YSTEMS

C

E RT I F I E

D

*www.designlights.org

C E R T I F I C A T I O N D A T AUL/cUL ListedISO 9001IP66 LightBARsLM79 / LM80 Compliant2G Vibration TestedDesignLights Consortium® Qualified*

E N E R G Y D A T AElectronic LED Driver>0.9 Power Factor<20% Total Harmonic Distortion120-277V/50 & 60Hz, 347V/60Hz, 480V/60Hz-30°C Minimum Temperature40°C Ambient Temperature Rating

E P AEffected Projected Area1.1 Sq. Ft.

S H I P P I N G D A T AApproximate Net Weight: 50 lbs. (22.7 kgs.)

28-1/4" [717mm]

21-1/2"[647mm]

6-1/4"[157mm]

DIMENSIONS

WALL MOUNT ARM

DUAL MOUNT ARM (EPA 1.36)

3" [76mm]

19" [482mm]

38" [965mm]

(2) 4"[101mm]

3" [76mm]

(2) 8-3/16"[207mm]

4"[101mm]

8-3/16"[207mm]

3" [76mm]

MOUNTING ACCESSORIES

Catalog # Type

Date

Project

Comments

Prepared by

OL1

APPROVED ALTERNATE MANUFACTURERS: 1. LITHONIA MRP LED SERIES2. STERNBERG SOLANA SL660 SERIES

WSU FOUNTAIN COURT RENOVATIONDETROIT, MICHIGAN

MAY 4, 2015WSU JOB NO. 999-222859

LIGHTING FIXTURE PRODUCT DATA SHEETS 265600A - 1

Eaton1000 Eaton BoulevardCleveland, OH 44122United StatesEaton.com

Specifications and dimensions subject to change without notice.

Eaton’s Cooper Lighting Business 1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com

MSA MESA LED

Number of LightBARs

Distribution

Power (Watts)

Current @ 120V (A)

Current @ 277V (A)

T2 T3 T4 SL2 SL3 SL4 5MQ 5WQ 5XQ RW SLR/SLL

7 LED LIGHTBAR

C01 27 0.23 0.13 1,708 1,709 1,668 1,718 1,668 1,675 1,845 1,770 1,791 1,701 1,609

C02 54 0.46 0.21 3,291 3,294 3,215 3,311 3,214 3,228 3,556 3,412 3,451 3,277 3,102

C03 77 0.65 0.29 4,751 4,755 4,641 4,779 4,640 4,660 5,133 4,925 4,982 4,731 4,478

C04 101 0.86 0.37 6,270 6,276 6,125 6,308 6,124 6,151 6,775 6,500 6,575 6,244 5,910

C05 131 1.11 0.50 7,508 7,515 7,334 7,553 7,333 7,365 8,112 7,783 7,873 7,477 7,076

C06 154 1.30 0.58 9,086 9,094 8,875 9,140 8,874 8,913 9,817 9,419 9,528 9,048 8,563

21 LED LIGHTBAR

B01 27 0.23 0.13 2,101 2,102 2,052 2,113 2,052 2,061 2,269 2,177 2,203 2,092 1,980

B02 51 0.43 0.20 4,048 4,052 3,954 4,072 3,954 3,971 4,374 4,196 4,245 4,031 3,815

B03 73 0.62 0.28 5,844 5,849 5,708 5,879 5,707 5,732 6,314 6,058 6,128 5,820 5,507

B04 95 0.81 0.35 7,712 7,720 7,534 7,759 7,533 7,566 8,333 7,995 8,087 7,681 7,269

B05 124 1.05 0.48 9,235 9,243 9,021 9,290 9,020 9,059 9,978 9,573 9,684 9,197 8,703

B06 146 1.24 0.56 11,176 11,186 10,917 11,243 10,915 10,963 12,075 11,585 11,719 11,130 10,533

POWER AND LUMENS BY BAR COUNT

AmbientTemperature

LumenMultiplier

10°C 1.04

15°C 1.03

25°C 1.00

40°C 0.96

LUMEN MULTIPLIER

Ambient Temperature

TM-21 LumenMaintenance

(60,000 Hours)

Theoretical L70(Hours)

25°C > 94% > 350,000

40°C > 93% > 250,000

50°C > 90% > 170,000

LUMEN MAINTENANCE

AVU0920722015-01-08 13:22:43

Sample Number: MSA-A06-LED-E1-T3-GM

Product Family 1 Number of LightBARs 2, 3 Lamp Type Voltage Distribution Color 4

MSA=Mesa B01= (1) 21 LED LightBARB02= (2) 21 LED LightBARsB03= (3) 21 LED LightBARsB04= (4) 21 LED LightBARsB05= (5) 21 LED LightBARsB06= (6) 21 LED LightBARsC01= (1) 7 LED LightBARC02= (2) 7 LED LightBARsC03= (3) 7 LED LightBARsC04= (4) 7 LED LightBARsC05= (5) 7 LED LightBARsC06= (6) 7 LED LightBARs

LED= Solid State Light Emitting

Diodes

E1=Electronic (120-277V)347=347V480=480V

T2=Type II AreaT3=Type III AreaT4=Type IV ShortSL2=Type II w/Spill ControlSL3=Type III w/Spill ControlSL4=Type IV w/Spill ControlRW=Rectangular Wide5MQ=Type V Square Medium5WQ=Type V Square Wide5XQ=Type V Square Extra WideSLL=90° Spill Light Eliminator LeftSLR=90° Spill Light Eliminator Right

AP=GreyBZ=BronzeBK=BlackDP=Dark PlatinumGM=Graphite MetallicWH=White

Options (Add as Suffi x) Accessories (Order Separately) 9

PC=Button Type Photocontrol (Specify Voltage)

R=NEMA Twistlock Photocontrol Recepetacle2L=Two Circuits 5

LCF=LightBAR Cover Plate Matches Housing Finish7060=70 CRI / 6000K CCT 6

8030=80 CRI / 3000K CCT 6

ICB=Integral Cold Weather Battery Pack (Specify 120 or 277V) 7

DIMRF-LW=LumaWatt Wireless Sensor, Wide Lens for 8' - 16' Mounting Height 8

DIMRF-LN=LumaWatt Wireless Sensor, Narrow Lens for 16' - 40' Mounting Height 8

VA6028-XX=Dual Mount Arm (EPA 1.38)VA6029-XX=Wall Mount Arm OA/RA1016=NEMA Photocontrol - Multi-TapOA/RA1027=NEMA Photocontrol - 480VOA/RA1201=NEMA Photocontrol - 347V MA1253=10kV Circuit Module Replacement

Notes: 1. DesignLights Consortium® Qualifi ed. Refer to www.designlights.org Qualifi ed Products List under Family Models for details.2. Standard 4000K CCT and nominal 70 CRI.3. 21 LED LightBAR powered at 350mA, 7 LED LightBAR powered at 1A.4. Cutsom and RAL color matching available upon request. Consult your Eaton’s Cooper Lighting business representative for more information.5. Low-level output varies by bar count. Consult factory. Not availalbe with 347V or 480V. Requires quantity two or more LightBARs.6. Consult factory for lead times and lumen multiplier.7. Available with B01-B04 or C01-C04 confi gurations only. Specify 120V or 277V. LED cold weather integral battery pack is rated for minimum operating temperature -40°F (-20°C). Operates one LightBAR for 90-minutes.

Not available in all confi guration, consult factory. Rated for use in 25°C ambient.8. LumaWatt wireless sensors are factory installed and require network components RF-EM1-, RF-GW1 and RF-ROUT1 in appropriate quantities. See www.cooperlighting.com for LumaWatt application information.9. Replace XX with color designation.

ORDERING INFORMATION

DarkBronze

WSU FOUNTAIN COURT RENOVATIONDETROIT, MICHIGAN

MAY 4, 2015WSU JOB NO. 999-222859

LIGHTING FIXTURE PRODUCT DATA SHEETS 265600A - 2

INVUE®

WARNING: The use of unauthorized accessories such as banners, signs, cameras or pennants for which the pole was not designed voids the pole warranty from Eaton's Cooper Lighting business and may result in pole failure causing serious injury or property damage. Upon request, Eaton's Cooper Lighting business will supply information regarding total loading capacity. The pole warranty from Eaton's Cooper Lighting business is void unless poles are used and installed as a complete pole/luminaire combination. This warranty specifically excludes failure as the result of a third party act or omission, misuse, unanticipated uses, fatigue failure or similar phenomena resulting from induced vibration, harmonic oscillation or resonance associated with movement of air currents around the product.

Specifications and dimensions subject to change without notice. Consult your Eaton's Cooper Lighting business representative or visit www.cooperlighting.com for available options, accessories and ordering information.

Catalog # Type

Date

Project

Comments

Prepared by

ARX ALUMINUM ROUND STRAIGHT

ADH1305072014-04-02 13:41:39

STANDARD BASE(Round aluminum poles only.)

TYPE “A”6", 7", 8" or 10"

STANDARD BASE(Round aluminum poles only.)

TYPE “N”(Standard with base cover.)4", 5" or 6"

FEATURES•Straight round shaft 6063-T6 aluminum alloy polished•Cast aluminum alloy base with aluminum bolt covers•Anchor bolt per ASTM A576•Three and four-bolt anchorage configurations•8'-20' mounting heights•Drilled or tenon (specify)

ORDERING INFORMATION

SAMPLE NUMBER: ARX4T08NGMA1V

Product Family

Shaft Size (Inches) 1

Wall Thickness (Inches)

Mounting Height (Feet)

Base Type Finish Mounting Type Number and Location of Arms

Options (Add as Suffix)

ARX= Aluminum Round Straight

4= 4"5= 5"

T= 0.125"M= 0.188"

08= 8'10= 10'12= 12'15= 15'18= 18'20= 20'

A= Aluminum (Round 4-Bolt Pole) 2

N= Aluminum (Round 3-Bolt Pole)

AP= GreyBA= Anodized BronzeBK= BlackBZ= BronzeCA= Anodized ClearDA= Anodized BlackDP= Dark PlatinumGM= Graphite MetallicGN= Hartford GreenWH= White

2= 2-3/8" O.D. Tenon (4" Long)3= 3-1/2” O.D. Tenon (5" Long)4= 4" O.D. Tenon (6" Long) - Slide/Flite/Epic5= 3" O.D. Tenon (4" Long) - Mesa6= 2-3/8" O.D. Tenon (6" Long)7= 4" O.D. Tenon (10" Long) - SDM1/SDM2A= Icon and Ascent Small Drill PatternC= Icon and Ascent Medium Drill PatternE= Vision Site Small Drill PatternF= Vision Site Structural MountG= Vision Site Medium Structural MountJ= Icon Small Structural Drill PatternK= Icon Medium Structural Drill PatternM= Vision Site Medium Drill PatternX= None

1= Single2= 2 at 180°3= Triple 3

4= 4 at 90°5= 2 at 90°6= 3 at 90°7= 2 at 120°X= None

A= 1/2" Tapped Hub (Specify location desired)

B= 3/4" Tapped Hub (Specify location desired)

C= Convenience Outlet 4

E= GFCI Convenience Outlet 4

F= Vibration PadG= Ground LugH= Additional

Hand Hole 5

V= Vibration Dampener

NOTES: 1. All shaft sizes nominal. 2. Base cover not included (order as option). 3. Square poles are 3 at 90°, round poles are 3 at 120°. 4. Outlet is located 4' above base and on same side of pole as hand hole, unless specified otherwise. Receptacle not included, provision only. 5. Additional hand hole is located 12" below pole top and 90° from standard hand hole location, unless otherwise specified.

Base View

Hand Hole18"

B

AB

BaseSize(S)

BP

BC

H

120°

See technical information.

DIMENSIONS

OL1

14'

DarkBronze

APPROVED ALTERNATE MANUFACTURERS: 1. LITHONIA RSA SERIES2. STERNBERG RSA SERIES

WSU FOUNTAIN COURT RENOVATIONDETROIT, MICHIGAN

MAY 4, 2015WSU JOB NO. 999-222859

LIGHTING FIXTURE PRODUCT DATA SHEETS 265600A - 3

Eaton1000 Eaton BoulevardCleveland, OH 44122United StatesEaton.com

Specifications and dimensions subject to change without notice.

Eaton’s Cooper Lighting Business 1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com

ARX ALUMINUM ROUND STRAIGHT

ADH1305072014-04-02 13:41:39

Effective Projected Area (At Pole Top)

Mounting Height (Feet)

Catalog Number 1, 2

WallThickness (Inches)

Bolt CircleDiameter(Inches)

Anchor Bolt Projection 3 (Inches)

Shaft Size 3(Inches)

Anchor Bolt Diameter x Length x Hook(Inches)

Net Weight(Pounds) Maximum Effective Projected Area

(Square Feet) 4

Max.FixtureLoad -IncludesBracket(Pounds)

MH BC BP B D x AB x H 70 mph 80 mph 90 mph 100 mph

8 ARX4T08N 0.125 6-3/4 3-1/4 4 3/4 x 17 x 3 20 16.0 11.9 9.1 7.2 100

10 ARX4T10N 0.125 6-3/4 3-1/4 4 3/4 x 17 x 3 24 12.2 8.9 6.6 5.1 100

12 ARX4T12N 0.125 6-3/4 3-1/4 4 3/4 x 17 x 3 27 9.4 6.7 4.8 3.6 100

12 ARX5T12N 0.125 7-3/4 3-1/4 5 3/4 x 17 x 3 33 16.1 11.8 9.1 7.3 100

15 ARX4T15N 0.125 6-3/4 3-1/4 4 3/4 x 17 x 3 33 6.4 4.2 2.8 1.8 100

15 ARX5T15N 0.125 7-3/4 3-1/4 5 3/4 x 17 x 3 40 11.5 8.2 6.2 4.9 100

18 ARX4M18N 5 0.188 6-3/4 3-1/4 4 3/4 x 17 x 3 54 7.2 4.8 3.1 2.1 100

18 ARX5M18N 0.188 7-3/4 3-1/4 5 3/4 x 17 x 3 66 13 9.2 7.0 5.5 150

20 ARX5M20N 0.188 7-3/4 3-1/4 5 3/4 x 17 x 3 73 10.3 7.1 5.3 4.1 150

Effective Projected Area (18" Above Pole Top)

Mounting Height (Feet)

Catalog Number 1, 2

WallThickness (Inches)

Bolt CircleDiameter(Inches)

Anchor Bolt Projection 3 (Inches)

Shaft Size 3(Inches)

Anchor Bolt Diameter x Length x Hook(Inches)

Net Weight(Pounds) Maximum Effective Projected Area

(Square Feet) 4

Max.FixtureLoad -IncludesBracket(Pounds)

MH BC BP B D x AB x H 70 mph 80 mph 90 mph 100 mph

8 ARX4T08N 0.125 6-3/4 3-1/4 4 3/4 x 17 x 3 20 13.6 10.1 7.7 6.1 100

10 ARX4T10N 0.125 6-3/4 3-1/4 4 3/4 x 17 x 3 24 10.6 7.7 5.8 4.5 100

12 ARX4T12N 0.125 6-3/4 3-1/4 4 3/4 x 17 x 3 27 8.3 5.9 4.3 3.2 100

12 ARX5T12N 0.125 7-3/4 3-1/4 5 3/4 x 17 x 3 33 14.3 10.5 8.1 6.5 100

15 ARX4T15N 0.125 6-3/4 3-1/4 4 3/4 x 17 x 3 33 5.6 3.7 2.4 1.6 100

15 ARX5T15N 0.125 7-3/4 3-1/4 5 3/4 x 17 x 3 40 10.2 7.2 5.5 4.3 100

18 ARX4M18N 5 0.188 6-3/4 3-1/4 4 3/4 x 17 x 3 54 6.5 4.3 2.8 1.9 100

18 ARX5M18N 0.188 7-3/4 3-1/4 5 3/4 x 17 x 3 66 11.7 8.3 6.3 5.0 150

20 ARX5M20N 0.188 7-3/4 3-1/4 5 3/4 x 17 x 3 73 9.4 6.5 4.9 3.7 150

NOTES: 1. Catalog number includes pole with hardware kit. Anchor bolts not included. Before installing, make sure proper anchor bolts and templates are obtained from Eaton's Cooper Lighting business.2. Tenon size or machining for rectangular arms must be specified. Hand hole position relative to drill location.3. Shaft size, anchor bolts and projections may vary slightly. All dimensions nominal.4. EPAs based on shaft properties with wind normal to flat. EPAs calculated using base wind velocity as indicated plus 30% gust factor.5. Factory installed vibration damper.

WSU FOUNTAIN COURT RENOVATIONDETROIT, MICHIGAN

MAY 4, 2015WSU JOB NO. 999-222859

LIGHTING FIXTURE PRODUCT DATA SHEETS 265600A - 4

KBR8 LEDLED Specification Bollard

Specifications

Ordering Information

Catalog Number

Notes

Type

Introduction

The KBR8 Bollard is a stylish, fully integrated LED solution for walkways. It features a sleek, modern design and is carefully engineered to provide long-lasting, energy-efficient lighting with a variety of optical and control options for customized performance.

With an expected service life of over 20 years of nighttime use and up to 70% in energy savings over comparable 100W metal halide luminaires, the KBR8 Bollard is a reliable, low-maintenance lighting solution that produces sites that are exceptionally illuminated.

8” Round(20.3 cm)

Height: 40”(101.6 cm)

Weight (max):

27 lbs(12.25 kg)

One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com© 2012-2014 Acuity Brands Lighting, Inc. All rights reserved.

Hit the Tab key or mouse over the page to see all interactive elements.

EXAMPLE: KBR8 LED 16C 700 40K SYM MVOLT DDBXD

MRAB U Anchor bolts for KBR8 LED 8

AccessoriesOrdered and shipped separately.

NOTES

1 Only available in the 12C, ASY version.2 Only available in the 16C, SYM version.3 Only available with 450 AMBLW version.4 Not available with ELCW.5 MVOLT driver operates on any line voltage from 120-277V

(50/60 Hz). Specify 120, 208, 240 or 277 options only when ordering with fusing (SF, DF options), or photocontrol (PE option).

6 Not available with 347V. Not available with fusing. Not available with 450 AMBLW.

7 Single fuse (SF) requires 120, 277, or 347 voltage option. Double fuse (DF) requires 208 or 240 voltage option.

8 MRAB U not available with L/AB4 option.

KBR8 LED

Series LEDs Drive current Color temperature Distribution Voltage Control options Other options Finish (required)

KBR8 LED Asymmetric12C 12 LEDs 1

Symmetric16C 16 LEDs 2

350 350 mA450 450 mA 3,4

530 530 mA700 700 mA

30K 3000 K40K 4000 K50K 5000 KAMBPC Amber

phosphor converted

AMBLW Amber limited wavelength 3,4

ASY Asymmetric 1

SYM Symmetric 2

MVOLT 5

120 5

208 5

240 5

277 5

347 4

Shipped installedPE Photoelectric cell,

button type DMG 0-10V dimming

driver (no controls) ELCW Emergency battery

backup 6

Shipped installedSF Single fuse (120,

277, 347V) 4,7

DF Double fuse (208, 240V) 4,7

H24 24” overall heightH30 30” overall height H36 36” overall height FG Ground-fault

festoon outlet L/AB Without anchor

bolts (3 bolt base)L/AB4 4 bolt retrofit base

without anchor bolts 8

DWHXD WhiteDNAXD Natural

aluminum

DDBXD Dark bronze

DBLXD BlackDDBTXD Textured

dark bronzeDBLBXD Textured

blackDNATXD Textured

natural aluminum

DWHGXD Textured white

H

D

OL2APPROVED ALTERNATE MANUFACTURERS: 1. INTRIGUE LIGHTING LED EL SERIES

WSU FOUNTAIN COURT RENOVATIONDETROIT, MICHIGAN

MAY 4, 2015WSU JOB NO. 999-222859

LIGHTING FIXTURE PRODUCT DATA SHEETS 265600A - 5

Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Actual performance may differ as a result of end-user environment and application. Actual wattage may differ by +/- 8% when operating between 120-480V +/- 10%.

FEATURES & SPECIFICATIONS

INTENDED USE The rugged construction and clean lines of the KBA bollard is ideal for illuminating building entryways, walking paths, and pedestrian plazas, as well as any other location requiring a low mounting height light source with fully cutoff illumination.

CONSTRUCTION One-piece 8-inch round extruded aluminum shaft with thick side walls for extreme durability, a high-impact clear acrylic lens and welded top cap. Die-cast aluminum mounting ring allows for easy leveling even in sloped locations and a full 360-degree rotation for precise alignment during installation. Three ½” x 11” anchor bolts with double nuts and washers and 3 ¾” bolt circle template ensure stability. Overall height is 42” standard.

FINISH Exterior parts are protected by a zinc-infused super durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering for maximum retention of gloss and luster. A tightly controlled multi-stage process ensures a minimum 3-mil thickness for a finish that can withstand the elements without cracking or peeling. Available in both textured and non-textured finishes.

OPTICS Two fully cutoff optical distributions are available: symmetrical and asymmetrical. IP66 sealed LED light engine provides smoothly graduated illumination without any uplight. Light engines are available in standard 4000 K (>70 CRI) or optional 3000 K (>80 CRI) or 5000 K (67 CRI). Limited-wavelength amber LEDs are also available.

ELECTRICAL Light engines consist of high-efficacy LEDs mounted to metal-core circuit boards to maximize heat dissipation and promote long life (L95/100,000 hours at 700mA at 25°C). Class 2 electronic drivers are designed for an expected life of 100,000 hours with < 1% failure rate. Electrical components are mounted on a removable power tray.

LISTINGS CSA certified to U.S. and Canadian standards. Light engines are IP66 rated. Rated for -40°C minimum ambient. Cold-weather emergency battery backup rated for -20°C minimum ambient.

WARRANTY Five-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.

Note: Specifications subject to change without notice.

Current (A)

Light Engines

Drive Current (mA)

System Watts 120 208 240 277 347

12C

350 16W 0.158 0.118 0.114 0.109 0.105

530 22W 0.217 0.146 0.136 0.128 0.118

700 31W 0.296 0.185 0.168 0.153 0.139

Amber 450 16W 0.161 0.120 0.115 0.110 0.106

16C

350 20W 0.197 0.137 0.128 0.121 0.114

530 28W 0.282 0.178 0.162 0.148 0.135

700 39W 0.385 0.231 0.207 0.185 0.163

Amber 450 20W 0.199 0.139 0.130 0.123 0.116

Electrical LoadProjected LED Lumen MaintenanceData references the extrapolated performance projections for the platforms noted in a 25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM-80-08 and projected per IESNA TM-21-11).

To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory.

Operating Hours 0 25,000 50,000 100,000

Lumen Maintenance Factor 1.00 0.98 0.97 0.95

To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s KBR8 Bollard homepage. Photometric DiagramsIsofootcandle plots for the KB LED Bollards. Distances are in units of mounting height (3’).

Test

No

. LTL

2448

2 te

sted

in a

cco

rdan

ce w

ith

IESN

A L

M-7

9-08

.

4

3

2

1

0

-4

-3

-2

-1

4 3 2 1 0 4321

Test

No

. LTL

2447

4 te

sted

in a

cco

rdan

ce w

ith

IESN

A L

M-7

9-08

.

4

3

2

1

0

-4

-3

-2

-1

4 3 2 1 0 4321

LEGEND

0.1 fc

0.5 fc

1.0 fc

3.0 fc

6.0 fc

12C 700 40K ASY 16C 700 40K SYM

Light Engines

Drive Current

System Watts

3000 K 4000 K 5000 K Limited Wavelength Amber

Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G

Asymmetric 3 Engines (12 LEDs)

350 16 641 40 1 1 1 809 51 1 1 1 870 54 1 1 1

530 22 947 43 1 1 1 1,191 54 1 1 1 1,282 58 1 1 1

700 31 1,214 40 1 1 1 1,527 51 1 1 1 1,646 55 1 1 1

Amber 450 16 324 20 0 1 0

Symmetric4 Engines (16 LEDs)

350 20 888 44 1 0 0 1,116 56 1 0 0 1,203 60 1 0 0

530 28 1,254 45 1 0 0 1,598 57 1 0 1 1,719 61 1 0 1

700 39 1,608 41 1 0 1 2,022 52 1 0 1 2,180 56 2 0 1

Amber 450 20 374 19 0 0 0

Note: Available with phosphor-converted amber LED’s (nomenclature AMBPC). These LED’s produce light with 97+% >530 nm. Output can be calculated by applying a 0.7 factor to 4000 K lumen values and photometric files.

Performance Data

One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com© 2012-2014 Acuity Brands Lighting, Inc. All rights reserved.

KBR8-LED

Rev. 06/24/14

WSU FOUNTAIN COURT RENOVATIONDETROIT, MICHIGAN

MAY 4, 2015WSU JOB NO. 999-222859

LIGHTING FIXTURE PRODUCT DATA SHEETS 265600A - 6