process performance motors...abb lv motors / lv process performance motors en 04-2008 3 eff1 eff3...

Process Performance Motors

New Cast Iron Motors

Best in class

Low Voltage Process Performance Motors

Best in class

With the new Process performance motors ABB is ready to meet and exceed

the future challenges of energy efficiency requirements, likewise the customer

expectations concerning lifetime reliability of motors.

We offer Process performance motors in EFF1 and premium efficiency versions

(meeting EPAct), and in cast iron frame, IEC frame sizes 71 to 450.

Our transcendent experience and competence benefits the customers in

every industry, in the most demanding applications.

2 ABB LV Motors / LV Process Performance Motors EN 04-2008

ABB is a leader in power and automation technologies that enable utility and industry customers to improve their performance while lowering environmental impact. The ABB Group of companies operates in around 100 countries and employs about 110,000 people.

Process Performance Motors

1

2

Cast iron motors 160 - 250 5

Premium efficiency cast iron 15 motors 160 - 250

Contents Page

1

2

ABB reserves the right to change the design, technical specification and dimensions without prior notice.

This catalogue contains technical data for the new motor types only. All other frame sizes are presented in our Process performance motors catalogue EN 12-2006. A complete new catalogue for Process performance motors will be published later in 2008.

ABB LV Motors / LV Process Performance Motors EN 04-2008 3

EFF1

EFF3

EFF2

Motor EFF1

Power Rating kW

75

80

85

90

95

100

1.1 1.5 2.2 3.0 4.0 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90

Effi

cien

cy %

M00

0291

ABB three phase induction motors, 400 V 50 Hz, EU efficiency levels, 4 pole

Efficiency values now acc. to new efficiency measuring method standard IEC/EN 60034-2-1; 2007 SeptemberThe new standard IEC/EN 60034-2-1, which came into force September 2007, introduces new rules concerning the testing methods to be used for determining losses and efficiency.

It offers two ways of determining the efficiency; direct method and indirect method. The new standard specifies following parameters for determining the efficiency according to indirect method:

– reference temperature– three options for determining additional load losses:

measurement, estimation and mathematical.

Under the new standard ABB uses the indirect calculation method, additional load losses determined from measuring.

The motor documentation must state which method is used.

The motor efficiencies do not change, only the testing method is changed. The efficiency figure quoted may be lower than the efficiency figure by the old method. Therefore EFF1 motors are still EFF1 motors even if the new efficiency figure is below the existing EFF1/EFF2 curve.

The efficiency values on the technical data pages in this catalogue are given according to both new and old calculation methods.

The table below shows the differences between old and new standard.

Old efficiency testing standard EN/IEC 60034-2: 1996

Direct method

Indirect method: • PLL (= additional losses) estimated at 0.5 % of

input power at rated load

Winding losses in stator and rotor determined at 95°C.

New efficiency testing standard IEC/EN 60034-2-1: 2007 SeptemberDirect method

Indirect method:• Measurement; PLL calculated from load tests• Estimation; PLL at 2.5% - 1.0% of input power at

rated load between 0.1 kW and 1000 kW• Mathematical calculation; Eh star - alternative

indirect method with mathematical calculation of PLL

Winding losses in stator and rotor determined at [25°C + actual temperature rise measured]

EU motor efficiency level classificationA Europe-wide agreement ensures that the efficiency levels of electric motors manufactured in Europe are clearly displayed. In contrast to the American legislation on motor efficiency the European agreement does not establish mandatory efficiency levels.

It basically establishes three classes giving motor manufacturers an incentive to qualify for a higher class.

These efficiency levels apply to 2- and 4-pole, three phase squirrel cage induction motors rated for 400 V, 50 Hz with S1 duty class with the output 1.1 to 90 kW, which account for the largest volume on the market.

The efficiency of motors from different manufacturers are collated in a database, EURODEEM, published by the European Commission. It is accessible over the Internet at http://iamest.jrc.it/projects/eem/eurodeem.htm.Output kW 2-pole Boarderline 4-pole Boarderline

EFF2/EFF3 EFF1/EFF2 EFF2/EFF3 EFF1/EFF21.1 76.2 82.8 76.2 83.81.5 78.5 84.1 78.5 85.02.2 81.0 85.6 81.0 86.43 82.6 86.7 82.6 87.44 84.2 87.6 84.2 88.35.5 85.7 88.6 85.7 89.27.5 87.0 89.5 87.0 90.111 88.4 90.5 88.4 91.015 89.4 91.3 89.4 91.818.5 90.0 91.8 90.0 92.222 90.5 92.2 90.5 92.630 91.4 92.9 91.4 93.237 92.0 93.3 92.0 93.645 92.5 93.7 92.5 93.955 93.0 94.0 93.0 94.275 93.6 94.6 93.6 94.790 93.9 95.0 93.9 95.0

4 ABB LV Motors / LV Industrial Performance Motors EN 04-2008

1

Process Performance Cast Iron Motors

New Cast Iron Motors M3BP 160 to 250

Frame sizes 160 to 250Output range 11 to 90 kWPoles 2 to 8 poles

Voltage up to 690 V2-speed motors as today

New features .......................................... 6

Technical data ........................................ 8

Dimension drawings ............................ 10

Rating plates, terminal box.................. 13

Motors in brief ...................................... 14

ABB LV Motors / PPM Cast iron 160 - 250 EN 04-2008 5

1

Process Performance Cast Iron Motors 160 to 250 New Design

With the new Process performance motors ABB is now ready to meet all the future challenges of energy efficiency requirements, and meet and exceed our customer expectations concerning motor reliability and lifecycle costs.

We offer Process performance motors thatfulfill the EFF1 and EPACT requirements. The motors will only be available with cast iron frames.

The new generation of Process performance motors is based on the new product design which has been developed in response to market demands, and is based on customer feed-back, a failure modes and effects analysis (FMEA), and with a strong environmental focus in mind. Spe-cial attention has been paid to motor reliability and a long lifetime by improving the bearing and winding temperature considerably.

Totally new design with extensive fea-tures and benefitsThe new products M3BP 160 to 250 are of a completely new generation that will replace the existing M3BP 160 to 250 with the features: n Adapted to market demandsn Including features for increased reliability – suitable for all process applications and heavy-duty demandsn Fulfilling the requirements of high efficiency, resulting in low running costs and an environmentally friendly motorn Designed with a reduced bearing and winding temperature – increased lifetime n Ready to meet all customer demands n Fulfills the EPAct efficiency requirements n Increased strength on the end shields and terminal boxn Improved surface treatmentn Improved terminal box sealing n Offer a harmonized feet design in Process performance motors

6 ABB LV Motors / PPM Cast Iron 160 - 250 EN 04-2008

1

Technical information and documentationData sheets and individual dimension drawings will be available during on the Internet at www.abb.com/ motors&generators, Online Motor Data Search. The technical data on the new motor sizes presented in this leaflet will be included in the main Process performance motor product catalogue to be published later in 2008. Meanwhile, the technical data for other frame sizes can be found in the existing “Process performance motors EN 12-2006” catalogue.

Variant codesFor variant codes please contact your nearest ABB sales office.


1

Process performance cast iron motors Technical data for totally enclosed squirrel cage three phase motorsIP 55, IC 411; Insulation class F, temperature rise class B

3) Efficiency values are given according to both IEC/EN 60034-2-1; 2007 and IEC 60034-2; 1996. Please note that the values are not comparable without knowing the testing method. ABB has calculated the new efficiency values acc. to indirect method, stray losses (additional losses) determined from measuring.

Output kW

Type designation Product code Speed r/min

Efficiency,IEC 60034-2-1; 2007 3)

Efficiency,IEC 60034-2; 1996

Power factor cos j

Current Torque Moment of inertia J=1/4GD2

kgm2

Weight kg

Sound pressure level LP dB(A)

Fullload100 %

3/4load75 %

Fullload100%

3/4load75 %

IN

A

Is

IN

TN

Nm

Ts

TN

Tmax

TN

2-poles = 3000 r/min 400 V 50 Hz Basic design11 M3BP 160 MLA 3GBP 161 031-••G 2929 89.8 90.3 91.1 91.6 0.91 19.2 7.7 36 2.6 3.0 0.045 127 69

15 M3BP 160 MLB 3GBP 161 032-••G 2933 90.7 91.2 92.0 92.5 0.91 26 7.8 49 2.7 3.1 0.049 134 69

18.5 M3BP 160 MLC 3GBP 161 033-••G 2936 91.3 91.7 92.6 93.0 0.90 32.5 7.3 60 2.3 3.1 0.054 142 69

22 M3BP 180 MLA 3GBP 181 031-••G 2950 91.6 91.8 92.6 92.8 0.88 39 7.9 71 2.8 3.2 0.078 191 69

30 M3BP 200 MLA 3GBP 201 031-••G 2952 92.3 92.5 93.4 93.6 0.90 52 7.9 97 2.8 3.0 0.163 271 72

37 M3BP 200 MLB 3GBP 201 032-••G 2949 92.7 93.0 93.8 94.1 0.90 64 7.7 120 2.6 3.0 0.181 284 72

45 M3BP 225 SMA 3GBP 221 031-••G 2965 93.6 93.7 94.4 94.5 0.88 79 7.4 145 2.3 2.6 0.25 348 74

55 M3BP 250 SMA 3GBP 251 031-••G 2968 93.9 93.9 94.6 94.6 0.88 96 7.1 177 2.2 2.8 0.517 405 75

2-poles = 3000 r/min 400 V 50 Hz High-output design22 M3BP 160 MLD 3GBP 161 034-••G 2926 91.4 92.1 92.9 93.6 0.92 37.5 7.7 72 2.6 2.9 0.064 170 69

30 1) M3BP 160 MLE 3GBP 161 035-••G 2926 91.8 92.5 93.3 94.0 0.92 51 7.8 98 2.8 2.9 0.074 184 69

30 M3BP 180 MLB 3GBP 181 032-••G 2951 92.2 92.5 93.5 93.8 0.88 53 8.2 97 3.0 3.3 0.093 208 69

45 M3BP 200 MLC 3GBP 201 033-••G 2949 93.0 93.4 94.2 94.6 0.90 77 7.8 146 2.6 2.9 0.198 298 72

55 1) M3BP 200 MLD 3GBP 201 034-••G 2950 93.3 93.6 94.6 95.0 0.90 94 8.2 178 2.7 3.1 0.198 320 72

55 M3BP 225 SMB 3GBP 221 032-••G 2963 93.9 94.0 94.7 94.8 0.88 96 7.4 177 2.3 2.5 0.28 370 74

75 1) M3BP 225 SMC 3GBP 221 033-••G 2965 94.5 94.7 95.4 95.6 0.87 132 7.9 242 2.6 2.6 0.316 2) 74

80 1) M3BP 225 SMD 3GBP 221 034-••G 2966 94.7 94.9 95.6 95.8 0.87 140 8.1 258 2.8 2.7 0.336 2) 74

75 M3BP 250 SMB 3GBP 251 032-••G 2969 94.5 94.6 95.2 95.3 0.89 129 7.5 241 2.5 2.8 0.593 452 75

90 1) M3BP 250 SMC 3GBP 251 033-••G 2971 94.6 94.7 95.5 95.6 0.89 154 8.1 289 2.9 2.9 0.654 2) 75

4-poles = 1500 r/min 400 V 50 Hz Basic design11 M3BP 160 MLA 3GBP 162 031-••G 1470 90.7 91.2 91.5 92.0 0.84 21 6.8 71 2.4 2.9 0.083 136 62

15 M3BP 160 MLB 3GBP 162 032-••G 1470 91.4 92.0 92.2 92.8 0.84 28.5 7.0 98 2.5 2.9 0.099 165 62

18.5 M3BP 180 MLA 3GBP 182 031-••G 1478 91.9 92.3 92.8 93.2 0.84 35 7.7 120 2.6 3.1 0.169 205 62

22 M3BP 180 MLB 3GBP 182 032-••G 1478 92.1 92.4 93.1 93.4 0.84 41 7.6 142 2.7 3.1 0.198 222 62

30 M3BP 200 MLA 3GBP 202 031-••G 1480 92.9 93.1 93.5 93.7 0.84 55 7.2 194 2.4 2.8 0.317 294 63

37 M3BP 225 SMA 3GBP 222 031-••G 1478 93.2 93.4 93.8 94.0 0.84 68 7.6 239 2.5 2.7 0.367 324 66

45 M3BP 225 SMB 3GBP 222 032-••G 1480 93.6 93.7 94.2 94.2 0.85 82 7.8 290 2.5 2.8 0.451 357 66

55 M3BP 250 SMA 3GBP 252 031-••G 1480 94.0 94.2 94.5 94.7 0.84 100 7.3 355 2.6 2.7 0.778 415 67

4-poles = 1500 r/min 400 V 50 Hz High-output design18.5 M3BP 160 MLC 3GBP 162 033-••G 1464 91.4 92.1 92.4 93.1 0.84 34.5 7.0 121 2.6 2.9 0.11 174 62

22 M3BP 160 MLD 3GBP 162 034-••G 1463 91.3 92.1 92.5 93.3 0.84 41 7.0 144 2.5 2.9 0.126 187 62

30 M3BP 180 MLC 3GBP 182 033-••G 1475 92.4 92.7 93.3 93.8 0.83 57 7.7 194 2.7 3.2 0.22 236 62

37 M3BP 200 MLB 3GBP 202 032-••G 1478 93.0 94.4 93.7 94.1 0.85 68 7.4 239 2.4 2.7 0.351 308 63

45 M3BP 200 MLC 3GBP 202 033-••G 1478 93.3 93.7 94.2 94.6 0.83 84 7.8 291 2.6 2.9 0.374 2) 63

55 M3BP 225 SMC 3GBP 222 033-••G 1475 93.5 93.8 94.2 94.6 0.86 99 7.5 356 2.4 2.5 0.485 371 66

73 M3BP 225 SMC 3GBP 222 034-••G 1474 93.2 93.5 94.0 94.3 0.84 134 8.1 473 2.6 2.6 0.553 2) 66

75 M3BP 250 SMB 3GBP 252 032-••G 1480 94.4 94.6 94.9 95.1 0.84 136 7.8 484 2.8 2.7 0.879 451 67

90 M3BP 250 SMC 3GBP 252 033-••G 1476 94.3 94.7 95.0 95.4 0.85 162 7.6 582 2.8 2.6 0.954 2) 67

1) Temperature rise class F 2) On request


1

Process performance cast iron motors Technical data for totally enclosed squirrel cage three phase motorsIP 55, IC 411; Insulation class F, temperature rise class B

Output kW


Efficiency,IEC 60034-2-1; 2007 3)

Efficiency,IEC 60034-2; 1996

Power factor cos j

Current Torque Moment of inertia J=1/4GD2

kgm2

Weight kg


Fullload100 %

3/4load75 %

Fullload100%

3/4load75 %

IN

A

Is

IN

TN

Nm

Ts

TN

Tmax

TN

6-poles = 1000 r/min 400 V 50 Hz Basic design7.5 M3BP 160 MLA 3GBP 163 031-••G 975 88.3 88.7 89.9 90.3 0.78 15.6 6.8 73 2.0 3.0 0.087 135 59

11 M3BP 160 MLB 3GBP 163 032-••G 974 89.4 89.9 91.0 91.5 0.78 23 7.7 108 2.4 3.3 0.116 172 59

15 M3BP 180 MLA 3GBP 183 031-••G 981 90.1 90.7 91.9 92.5 0.77 31 6.4 146 2.0 2.7 0.196 221 59

18.5 M3BP 200 MLA 3GBP 203 031-••G 987 91.0 91.2 91.9 92.1 0.80 36.5 7.0 179 2.3 2.9 0.398 270 63

22 M3BP 200 MLB 3GBP 203 032-••G 987 91.5 91.8 92.4 92.7 0.82 42 7.0 213 2.2 2.8 0.464 291 63

30 M3BP 225 SMA 3GBP 223 031-••G 986 92.1 92.4 92.9 93.2 0.82 57 6.6 290 2.2 2.7 0.675 350 63

37 M3BP 250 SMA 3GBP 253 031-••G 990 92.4 92.5 93.4 93.5 0.81 71 6.9 357 2.5 2.7 1.154 395 63

6-poles = 1000 r/min 400 V 50 Hz High-output design15 M3BP 160 MLC 3GBP 163 033-••G 974 89.0 89.6 90.8 91.4 0.78 31 6.5 147 1.9 2.8 0.134 185 59

18.5 M3BP 180 MLB 3GBP 183 032-••G 975 89.7 90.5 91.7 92.5 0.77 38.5 5.9 181 1.8 2.4 0.218 234 59

30 M3BP 200 MLC 3GBP 203 033-••G 985 91.9 92.2 92.9 93.2 0.82 57 7.0 291 2.3 2.8 0.547 318 63

37 M3BP 225 SMB 3GBP 223 032-••G 985 92.5 92.8 93.3 93.6 0.81 71 6.7 359 2.3 2.8 0.728 365 63

45 M3BP 250 SMB 3GBP 253 032-••G 989 92.9 93.2 94.0 94.3 0.84 83 7.0 435 2.6 2.7 1.393 441 63


5.5 M3BP 160 MLB 3GBP 164 032-••G 727 85.5 85.7 86.6 86.8 0.64 14.5 5.0 72 1.6 2.8 0.087 134 59

7.5 M3BP 160 MLC 3GBP 164 033-••G 728 86.7 86.9 88.0 88.2 0.65 19.2 5.0 98 1.6 2.5 0.134 185 59

11 M3BP 180 MLA 3GBP 184 031-••G 728 87.7 88.5 88.9 89.7 0.68 26.5 4.4 144 1.5 2.0 0.218 234 59

15 M3BP 200 MLA 3GBP 204 031-••G 738 89.9 90.3 90.5 90.9 0.73 33 5.4 194 1.8 2.3 0.468 290 60

18.5 M3BP 225 SMA 3GBP 224 031-••G 739 90.9 91.2 91.5 91.8 0.73 40 5.4 239 2.1 2.5 0.686 350 63

22 M3BP 225 SMB 3GBP 224 032-••G 738 91.4 91.7 92.0 92.3 0.74 46.5 5.5 285 2.1 2.4 0.739 363 63

30 M3BP 250 SMA 3GBP 254 031-••G 741 91.6 91.6 92.6 92.6 0.75 63 6.0 387 2.0 2.5 1.404 440 63



1

Process performance cast iron motors M3BP 160 - 250Dimension drawingsFoot-mounted motor; IM B3 (IM 1001), IM B6 (IM 1051), IM B7 (IM 1061), IM B8 (IM 1071),IM V5 (IM 1011), IM V6 (IM 1031)

Motor size

Poles A AA AB AC AD AE B B’ BA BB C CA CA’ CB D DA DB DC E EA EG EH

160 1) 2-8 254 67 310 338 261 257 210 254 69 294 108 164 126 20 42 32 M16 M12 110 80 36 28

160 2) 2-8 254 67 310 338 261 257 210 254 69 294 108 262 224 20 42 32 M16 M12 110 80 36 28

180 2-8 279 67 340 381 281 257 241 279 68 335 121 263 225 19 48 32 M16 M12 110 80 36 28

200 2-8 318 69 378 413 328 300 267 305 80 378 133 314 276 20 55 45 M20 M16 110 110 42 36

225 2 356 84 435 460 348 300 286 311 69 351 149 314 289 20 55 55 M20 M20 110 110 42 42

225 4-8 356 84 435 460 348 300 286 311 69 351 149 314 289 20 60 55 M20 M20 140 110 42 42

250 2 406 92 480 508 376 300 311 349 69 392 168 281 243 23 60 55 M20 M20 140 110 42 42

250 4-8 406 92 480 508 376 300 311 349 69 392 168 281 243 23 65 55 M20 M20 140 110 42 42

Motor size

Poles F FA G GA GB GC H HA HD HE K L LC UB1 UB2 VA VB VC VD VE

160 1) 2-8 12 10 37 45 27 35 160 23 421 195 14.5 583 671.5 M40 M16 49 257 95 162 129

160 2) 2-8 12 10 37 45 27 35 160 23 421 195 14.5 681 768.5 M40 M16 49 257 95 162 129

180 2-8 14 10 42.5 51.5 27 35 180 23 461 215 14.5 726 815 M40 M16 62 257 95 162 129

200 2-8 16 14 49 59 39.5 48.5 200 23 528 249 18.5 821 934 M63 M16 55 311 111 201 156

225 2 16 16 49 59 49 59 225 23 573 269 18.5 849 971 M63 M16 48 311 111 201 156

225 4-8 18 16 53 64 49 59 225 23 573 269 18.5 879 1001 M63 M16 48 311 111 201 156

250 2 18 16 53 64 49 59 250 23 626 297 24 884 1010 M63 M16 48 311 111 201 156

250 4-8 18 16 58 69 49 59 250 23 626 297 24 884 1010 M63 M16 48 311 111 201 156

TolerancesA, B ISO js14 C, CA ± 0.8 D, DA ISO k6 < Ø 50mm ISO m6 > Ø 50mmF, FA ISO h9H +0 -0.5

1) MLA 4- and 6-pole, MLA and MLB 8-pole2) High-output, MLB 6-pole, MLC 8-pole

Above table gives the main dimensions in mm.

For detailed drawings please see our web-pages ‘www.abb.com/motors&generators’ or contact ABB.


1

Process performance cast iron motors M3BP 160 - 250Dimension drawingsFlange-mounted motor; IM B5 (IM 3001), IM V1 (IM 3011), IM V3 (IM 3031), and IM B14 (3601), V18 (IM 3611), V19 (IM 3631)

Motor size

Poles AC AE D DA DB DC E3) EA EG EH F FA G GA GB GC HB HE

160 1) 2-8 338 257 42 32 M16 M12 110 80 36 28 12 10 37 45 27 35 261 195160 2) 2-8 338 257 42 32 M16 M12 110 80 36 28 12 10 37 45 27 35 261 195

180 2-8 381 257 48 32 M16 M12 110 80 36 28 14 10 42.5 51.5 27 35 281 215200 2-8 413 300 55 45 M20 M16 110 110 42 36 16 14 49 59 39.5 48.5 328 249225 2 460 300 55 55 M20 M20 110 110 42 42 16 16 49 59 49 59 348 269225 4-8 460 300 60 55 M20 M20 140 110 42 42 18 16 53 64 49 59 325 269250 2 508 300 60 55 M20 M20 140 110 42 42 18 16 53 64 49 59 376 297250 4-8 508 300 65 55 M20 M20 140 110 42 42 18 16 58 69 49 59 376 297

Motor size

Poles L LA LB LC M N P S T UB1 UB2 VA VB VC VD VE

160 1) 2-8 583 20 473 671.5 300 250 350 19 5 M40 M16 49 257 95 162 129 160 2) 2-8 681 20 571 768.5 300 250 350 19 5 M40 M16 49 257 95 162 129180 2-8 726 20 616 815 300 250 350 19 5 M40 M16 62 257 95 162 129200 2-8 821 20 711 934 350 300 400 19 5 M63 M16 55 311 111 201 156225 2 849 20 739 971 400 350 450 19 5 M63 M16 48 311 111 201 156225 4-8 879 20 769 1001 400 350 450 19 5 M63 M16 48 311 111 201 156250 2 884 24 744 1010 500 450 550 19 5 M63 M16 48 311 111 201 156250 4-8 884 24 744 1010 500 450 550 19 5 M63 M16 48 311 111 201 156

TolerancesD, DA ISO k6 < Ø 50mm ISO m6 > Ø 50mmF, FA ISO h9

N ISO j6

1) MLA 4- and 6-pole, MLA and MLB 8-pole2) High-output, MLB 6-pole, MLC 8-pole3) Shoulder or shaft extension and contact surface of flange are in the same plane.

M3BP 160 to 200 M3BP 225 to 250

Above table gives the main dimensions in mm. For detailed drawings please see our web-pages ‘www.abb.com/motors&generators’ or contact ABB.


1

Process performance cast iron motors M3BP 160 - 250Dimension drawingsFoot- and flange-mounted motor; IM B35 (IM 2001), IM V15 (IM 2011), IM V36 (IM 2031)

Motor size

Poles GA GB GC H HA HD HE K L LA LB LC M N P S T UB1 UB2 VA VB VC VD VE

160 1) 2-8 45 27 35 160 23 421 195 14.5 583 20 473 671.5 300 250 350 19 5 M40 M16 49 257 95 162 129

160 2) 2-8 45 27 35 160 23 421 195 14.5 681 20 571 768.5 300 250 350 19 5 M40 M16 49 257 95 162 129

180 2-8 51.5 27 35 180 23 461 215 14.5 726 20 616 815 300 250 350 19 5 M40 M16 62 257 95 162 129

200 2-8 59 39.5 48.5 200 23 528 249 18.5 821 20 711 934 350 300 400 19 5 M63 M16 55 311 111 201 156

225 2 59 49 59 225 23 573 269 18.5 849 20 739 971 400 350 450 19 5 M63 M16 48 311 111 201 156

225 4-8 64 49 59 225 23 573 269 18.5 879 20 769 1001 400 350 450 19 5 M63 M16 48 311 111 201 156

250 2 64 49 59 250 23 626 297 24 884 24 744 1010 500 450 550 19 5 M63 M16 48 311 111 201 156

250 4-8 69 49 59 250 23 626 297 24 884 24 744 1010 500 450 550 19 5 M63 M16 48 311 111 201 156

TolerancesA, B ISO js14 C, CA ± 0.8 D, DA ISO k6 < Ø 50 mm ISO m6 > Ø 50 mmF, FA ISO h9H +0 -0.5N ISO j6

1) MLA 4-, 6- and 8-pole and MLB 8-pole2) High-output, MLB 6-pole, MLC 8-pole3) Shoulder or shaft extension and contact surface of flange are in the same plane.

Motor size

Poles A AA AB AC AD AE B B’ BA BB C CA CA’ CB D DA DB DC E3) EA EG EH F FA G

160 1) 2-8 254 67 310 338 261 257 210 254 69 294 108 164 126 17 42 32 M16 M12 110 80 36 28 12 10 37

160 2) 2-8 254 67 310 338 261 257 210 254 69 294 108 262 224 17 42 32 M16 M12 110 80 36 28 12 10 37

180 2-8 279 67 340 381 281 257 241 279 68 335 121 263 225 35 48 32 M16 M12 110 80 36 28 14 10 42.5

200 2-8 318 69 378 413 328 300 267 305 80 378 133 314 276 37 55 45 M20 M16 110 110 42 36 16 14 49

225 2 356 84 435 460 348 300 286 311 69 351 149 314 289 30 55 55 M20 M20 110 110 42 42 16 16 49

225 4-8 356 84 435 460 348 300 286 311 69 351 149 314 289 30 60 55 M20 M20 140 110 42 42 18 16 53

250 2 406 92 480 508 376 300 311 349 69 392 168 281 243 69 60 55 M20 M20 140 110 42 42 18 16 53

250 4-8 406 92 480 508 376 300 311 349 69 392 168 281 243 69 65 55 M20 M20 140 110 42 42 18 16 58

M3BP 160 to 200 M3BP 225 to 250




1

Rating plate

Motor sizes 160 to 180 Motor sizes 200 to 250

Terminal boxSample of terminal box Sample of dimension drawing

Motor size A1 B1 H1

M3BP 160 to 180 257 257 106

M3BP 200 to 250 300 311 150


1

Process performance cast iron motors in brief

Motor size 160 180 200 225 250

Stator Material Cast iron EN-GJL-200/GG 20/GRS 200

Paint colour shade Blue, Munsell 8B 4.5/3.25 / NCS 4822 B05G

Surface treatment Two-pack epoxy paint, ≥ 100 µm Two-pack epoxy paint, ≥ 100 µm

Bearing end shields Material Cast iron EN-GJL-200/GG 20/GRS 200



Bearings D-end 6309/C3 6310/C3 6312/C3 6313/C3 6315/C3

N-end 6209/C3 6209/C3 6210/C3 6212/C3 6213/C3

Axially-locked bearings

Inner bearing cover As standard, locked at D-end

Bearing seal Axial seal as standard, radial seal on request

Lubrication Regreasable bearings, regreasing nipples M6x1

SPM-nipples As standard

Rating plate Material Stainless steel, SS-EN 10088, 0.5 mm

Terminal box Frame material Cast iron EN-GJL-200/GG 20/GRS 200

Cover material Cast iron EN-GJL-200/GG 20/GRS 200

Cover screws material Steel 8.8, zinc electroplated and chromated

Connections Cable entries 2xM40 2xM40 2xM63 2xM63 2xM63

Terminals 6 terminals for connection with cable lugs (not included)

Cable glands Cable flanges as standard, cable glands as option

Fan Material Polypropylene. Reinforced with 20% glass fibre.

Fan cover Material Hot dip galvanized steel


Surface treatment Two-pack polyester powder paint, ≥ 100 µm

Stator winding Material Copper

Insulation Insulation class F

Winding protection 3 PTC thermistors as standard, 150°C

Rotor winding Material Pressure die-cast aluminum

Balancing method Half key balancing as standard

Key ways Closed key way

Heating elements On request 25 W 50 W 50 W 50 W 50 W

Drain holes Standard, open on delivery

Enclosure IP 55, higher protection on request

Cooling method IC 411


Process Performance Premium Efficiency Cast Iron Motors

New Cast Iron Motors M4BP 160 to 250

Frame sizes 160 to 250Output range 11 to 90 kWPoles 2 to 8 poles

Voltage up to 690 V

New features ........................................ 16

Technical data ...................................... 18

Dimension drawings ............................ 19

Rating plates, terminal boxes ............. 22

Motors in brief ...................................... 23

ABB LV Motors / PPM premium efficiency M4BP 160 - 250 EN 04-2008 15

2

Process Performance Premium Efficiency Cast Iron Motors 160 to 250 New Design

With the new Process performance motors ABB is now ready to meet all the future challenges of energy efficiency requirements, and meet and exceed our customer expectations concerning motor reliability and lifecycle costs.

We offer Process performance motors which fulfill the EFF1 and EPACT requirements. The motors will only be available with cast iron frames.

The new generation of Process performance motors is based on the new product design which has been developed in response to market demands, and is based on customer feed-back, a failure modes and effects analysis (FMEA), and with a strong environmental focus in mind. Spe-cial attention has been paid to motor reliability and long lifetime by improving thebearing and winding temperature considerably.

Totally new design with extensive fea-tures and benefitsThe new products M4BP 160 to 250 are of a completely new generation that will replace the existing M4BP 160 to 250 with the features:n Adapted to market demandsn Including features for increased reliability – suitable for all process applications and heavy-duty demandsn Fulfill the requirements of high efficiency, resulting in low running costs and an environmentally friendly motorn Designed with a reduced bearing and winding temperature – increased lifetime n Ready to meet all customer demands n Fulfill the EPAct efficiency requirements n Increased strength on the end shields and terminal boxn Improved surface treatmentn Improved terminal box sealing n Offer a harmonized feet design in Process performance motors

16 ABB LV Motors / PPM premium efficiency M4BP 160 - 250 EN 04-2008

2

Technical information and documentationData sheets and individual dimension drawings will be available on the Internet at www.abb.com/ motors&generators, Online Motor Data Search. The technical data of the new motor sizes pre-sented in this leaflet will be included in the main Process performance motor product catalogue to be published later in 2008. Meanwhile, the technical data on other frame sizes can be found in the existing “Process performance motors EN 12-2006” catalogue.

Variant codesFor variant codes please contact your nearest ABB sales office.


2

Process performance premium efficiency cast iron motors Technical data for totally enclosed squirrel cage three phase motorsIP 55, IC 411; Insulation class F, temperature rise class B


Output kW


Efficiency, IEC 60034-2-1; 2007 1)

Efficiency, IEC 60034-2; 2006

Power factor cos j

Current Torque Moment of inertia J=1/4GD2 kgm2

Weight kg


Fullload100 %

3/4load75 %

Fullload100 %

3/4load75 %

IN

A

Is

IN

TN

Nm

Ts

TN

Tmax

TN


15 M4BP 160 MLB 3GBP 161 052-••G 2936 92.0 92.4 92.9 93.3 0.92 25.5 7.8 49 2.7 3.1 0.064 171 69

18.5 M4BP 160 MLC 3GBP 161 053-••G 2939 92.4 92.8 93.3 93.7 0.93 31 8.1 60 2.9 3.2 0.074 184 69

22 M4BP 180 MLA 3GBP 181 051-••G 2950 92.7 92.9 93.5 93.7 0.91 37.5 8.1 71 3.0 3.2 0.118 235 69

30 M4BP 200 MLA 3GBP 201 051-••G 2956 93.4 93.4 94.0 94.0 0.90 52 8.0 97 2.8 3.1 0.198 299 72

37 M4BP 200 MLB 3GBP 201 052-••G 2954 93.7 93.9 94.3 94.5 0.91 63 8.0 120 2.8 3.0 0.219 314 72

45 M4BP 225 SMA 3GBP 221 051-••G 2967 94.2 94.1 94.9 94.8 0.91 76 8.0 145 2.5 2.6 0.336 410 74

55 M4BP 250 SMA 3GBP 251 051-••G 2969 94.4 94.4 95.0 95.0 0.90 93 7.5 177 2.3 2.8 0.593 453 75


15 M4BP 160 MLB 3GBP 162 052-••G 1474 92.3 92.5 93.0 93.2 0.84 28 8.1 97 2.9 3.4 0.126 187 62

18.5 M4BP 180 MLA 3GBP 182 051-••G 1479 93.1 93.5 93.6 94.0 0.84 34 7.6 119 2.6 2.9 0.22 235 62

22 M4BP 180 MLB 3GBP 182 052-••G 1479 93.1 93.5 93.6 94.0 0.84 40.5 7.9 142 2.9 3.0 0.22 236 62

30 M4BP 200 MLA 3GBP 202 051-••G 1482 93.8 94.0 94.3 94.5 0.85 54 7.5 193 2.5 2.9 0.374 319 63

37 M4BP 225 SMA 3GBP 222 051-••G 1483 94.2 94.1 94.6 94.5 0.86 66 8.8 238 2.8 3.1 0.553 399 66

45 M4BP 225 SMB 3GBP 222 052-••G 1481 94.3 94.3 94.6 94.6 0.87 79 8.1 290 2.6 2.9 0.553 399 66

55 M4BP 250 SMA 3GBP 252 051-••G 1480 94.6 94.7 95.0 95.1 0.86 98 8.0 355 3.0 2.9 0.854 476 67

6-poles = 1000 r/min 400 V 50 Hz Basic design7.5 M4BP 160 MLA 3GBP 163 051-••G 978 90.2 90.2 91.1 91.3 0.77 15.5 7.8 73 2.5 3.5 0.116 173 59

11 M4BP 160 MLB 3GBP 163 052-••G 980 90.8 90.8 91.5 91.5 0.75 23.5 7.8 107 2.4 3.7 0.134 186 59

15 M4BP 180 MLA 3GBP 183 051-••G 982 91.6 91.8 92.1 92.3 0.75 31.5 6.9 146 2.0 2.9 0.218 234 59

18.5 M4BP 200 MLA 3GBP 203 051-••G 989 92.1 91.9 92.7 92.5 0.80 36 8.1 179 2.7 3.4 0.464 292 63

22 M4BP 200 MLB 3GBP 203 052-••G 989 92.5 92.4 93.1 93.0 0.81 42 8.2 212 2.7 3.4 0.547 318 63

30 M4BP 225 SMA 3GBP 223 051-••G 988 93.2 93.2 93.8 93.8 0.81 57 7.9 290 2.7 3.2 0.833 393 63

37 M4BP 250 SMA 3GBP 253 051-••G 988 93.5 93.6 94.1 94.2 0.84 68 8.1 357 2.8 2.8 1.541 468 63


2

Process performance premium efficiency M4BP 160 - 250cast iron motors Dimension drawings

Motor size

Poles A AA AB AC AD AE B B’ BA BB C CA CA’ CB D DA DB DC E EA EG EH

160 1) 2-8 254 67 310 338 261 257 210 254 69 294 108 164 126 20 42 32 M16 M12 110 80 36 28

160 2) 2-8 254 67 310 338 261 257 210 254 69 294 108 262 224 20 42 32 M16 M12 110 80 36 28

180 2-8 279 67 340 381 281 257 241 279 68 335 121 263 225 19 48 32 M16 M12 110 80 36 28

200 2-8 318 69 378 413 328 300 267 305 80 378 133 314 276 20 55 45 M20 M16 110 110 42 36

225 2 356 84 435 460 348 300 286 311 69 351 149 314 289 20 55 55 M20 M20 110 110 42 42

225 4-8 356 84 435 460 348 300 286 311 69 351 149 314 289 20 60 55 M20 M20 140 110 42 42

250 2 406 92 480 508 376 300 311 349 69 392 168 281 243 23 60 55 M20 M20 140 110 42 42

250 4-8 406 92 480 508 376 300 311 349 69 392 168 281 243 23 65 55 M20 M20 140 110 42 42

Motor size

Poles F FA G GA GB GC H HA HD HE K L LC UB1 UB2 VA VB VC VD VE

160 1) 2-8 12 10 37 45 27 35 160 23 421 195 14.5 583 671.5 M40 M16 49 257 95 162 129

160 2) 2-8 12 10 37 45 27 35 160 23 421 195 14.5 681 768.5 M40 M16 49 257 95 162 129

180 2-8 14 10 42.5 51.5 27 35 180 23 461 215 14.5 726 815 M40 M16 62 257 95 162 129

200 2-8 16 14 49 59 39.5 48.5 200 23 528 249 18.5 821 934 M63 M16 55 311 111 201 156

225 2 16 16 49 59 49 59 225 23 573 269 18.5 849 971 M63 M16 48 311 111 201 156

225 4-8 18 16 53 64 49 59 225 23 573 269 18.5 879 1001 M63 M16 48 311 111 201 156

250 2 18 16 53 64 49 59 250 23 626 297 24 884 1010 M63 M16 48 311 111 201 156

250 4-8 18 16 58 69 49 59 250 23 626 297 24 884 1010 M63 M16 48 311 111 201 156

TolerancesA, B ISO js14 C, CA ± 0.8 D, DA ISO k6 < Ø 50mm ISO m6 > Ø 50mmF, FA ISO h9H +0 -0.5

1) MLA 4- and 6-pole, MLA and MLB 8-pole2) High-output, MLB 6-pole, MLC 8-pole

Foot-mounted motor; IM B3 (IM 1001), IM B6 (IM 1051), IM B7 (IM 1061), IM B8 (IM 1071),IM V5 (IM 1011), IM V6 (IM 1031)




2

Process performance premium efficiency M4BP 160 - 250 cast iron motors Dimension drawingsFlange-mounted motor; IM B5 (IM 3001), IM V1 (IM 3011), IM V3 (IM 3031), and IM B14 (3601), V18 (IM 3611), V19 (IM 3631)

Motor size

Poles AC AE D DA DB DC E3) EA EG EH F FA G GA GB GC HB HE

160 1) 2-8 338 257 42 32 M16 M12 110 80 36 28 12 10 37 45 27 35 261 195160 2) 2-8 338 257 42 32 M16 M12 110 80 36 28 12 10 37 45 27 35 261 195

180 2-8 381 257 48 32 M16 M12 110 80 36 28 14 10 42.5 51.5 27 35 281 215200 2-8 413 300 55 45 M20 M16 110 110 42 36 16 14 49 59 39.5 48.5 328 249225 2 460 300 55 55 M20 M20 110 110 42 42 16 16 49 59 49 59 348 269225 4-8 460 300 60 55 M20 M20 140 110 42 42 18 16 53 64 49 59 325 269250 2 508 300 60 55 M20 M20 140 110 42 42 18 16 53 64 49 59 376 297250 4-8 508 300 65 55 M20 M20 140 110 42 42 18 16 58 69 49 59 376 297

Motor size

Poles L LA LB LC M N P S T UB1 UB2 VA VB VC VD VE

160 1) 2-8 583 20 473 671.5 300 250 350 19 5 M40 M16 49 257 95 162 129 160 2) 2-8 681 20 571 768.5 300 250 350 19 5 M40 M16 49 257 95 162 129180 2-8 726 20 616 815 300 250 350 19 5 M40 M16 62 257 95 162 129200 2-8 821 20 711 934 350 300 400 19 5 M63 M16 55 311 111 201 156225 2 849 20 739 971 400 350 450 19 5 M63 M16 48 311 111 201 156225 4-8 879 20 769 1001 400 350 450 19 5 M63 M16 48 311 111 201 156250 2 884 24 744 1010 500 450 550 19 5 M63 M16 48 311 111 201 156250 4-8 884 24 744 1010 500 450 550 19 5 M63 M16 48 311 111 201 156

TolerancesD, DA ISO k6 < Ø 50mm ISO m6 > Ø 50mmF, FA ISO h9

N ISO j6

1) MLA 4- and 6-pole, MLA and MLB 8-pole2) High-output, MLB 6-pole, MLC 8-pole3) Shoulder or shaft extension and contact surface of flange are in the same plane.

M4BP 160 to 200 M4BP 225 to 250

Above table gives the main dimensions in mm. For detailed drawings please see our web-pages ‘www.abb.com/motors&generators’ or contact ABB.


2

Process performance premium efficiency M4BP 160 - 250 cast iron motors Dimension drawingsFoot- and flange-mounted motor; IM B35 (IM 2001), IM V15 (IM 2011), IM V36 (IM 2031)

Motor size

Poles GA GB GC H HA HD HE K L LA LB LC M N P S T UB1 UB2 VA VB VC VD VE

160 1) 2-8 45 27 35 160 23 421 195 14.5 583 20 473 671.5 300 250 350 19 5 M40 M16 49 257 95 162 129

160 2) 2-8 45 27 35 160 23 421 195 14.5 681 20 571 768.5 300 250 350 19 5 M40 M16 49 257 95 162 129

180 2-8 51.5 27 35 180 23 461 215 14.5 726 20 616 815 300 250 350 19 5 M40 M16 62 257 95 162 129

200 2-8 59 39.5 48.5 200 23 528 249 18.5 821 20 711 934 350 300 400 19 5 M63 M16 55 311 111 201 156

225 2 59 49 59 225 23 573 269 18.5 849 20 739 971 400 350 450 19 5 M63 M16 48 311 111 201 156

225 4-8 64 49 59 225 23 573 269 18.5 879 20 769 1001 400 350 450 19 5 M63 M16 48 311 111 201 156

250 2 64 49 59 250 23 626 297 24 884 24 744 1010 500 450 550 19 5 M63 M16 48 311 111 201 156

250 4-8 69 49 59 250 23 626 297 24 884 24 744 1010 500 450 550 19 5 M63 M16 48 311 111 201 156

TolerancesA, B ISO js14 C, CA ± 0.8 D, DA ISO k6 < Ø 50 mm ISO m6 > Ø 50 mmF, FA ISO h9H +0 -0.5N ISO j6

1) MLA 4-, 6- and 8-pole and MLB 8-pole2) High-output, MLB 6-pole, MLC 8-pole3) Shoulder or shaft extension and contact surface of flange are in the same plane.

Motor size

Poles A AA AB AC AD AE B B’ BA BB C CA CA’ CB D DA DB DC E3) EA EG EH F FA G

160 1) 2-8 254 67 310 338 261 257 210 254 69 294 108 164 126 17 42 32 M16 M12 110 80 36 28 12 10 37

160 2) 2-8 254 67 310 338 261 257 210 254 69 294 108 262 224 17 42 32 M16 M12 110 80 36 28 12 10 37

180 2-8 279 67 340 381 281 257 241 279 68 335 121 263 225 35 48 32 M16 M12 110 80 36 28 14 10 42.5

200 2-8 318 69 378 413 328 300 267 305 80 378 133 314 276 37 55 45 M20 M16 110 110 42 36 16 14 49

225 2 356 84 435 460 348 300 286 311 69 351 149 314 289 30 55 55 M20 M20 110 110 42 42 16 16 49

225 4-8 356 84 435 460 348 300 286 311 69 351 149 314 289 30 60 55 M20 M20 140 110 42 42 18 16 53

250 2 406 92 480 508 376 300 311 349 69 392 168 281 243 69 60 55 M20 M20 140 110 42 42 18 16 53

250 4-8 406 92 480 508 376 300 311 349 69 392 168 281 243 69 65 55 M20 M20 140 110 42 42 18 16 58

M4BP 160 to 200 M4BP 225 to 250




2

Rating plates

Motor sizes 160 to 180 Motor sizes 200 to 250

Terminal boxSample of terminal box Sample of dimension drawing

Motor size A1 B1 H1

M4BP 160 to 180 257 257 106

M4BP 200 to 250 300 311 150


2

Process performance premium efficiency cast iron motors in briefMotor size 160 180 200 225 250

Stator Material Cast iron EN-GJL-200/GG 20/GRS 200



Bearing end shields Material Cast iron EN-GJL-200/GG 20/GRS 200



Bearings D-end 6309/C3 6310/C3 6312/C3 6313/C3 6315/C3

N-end 6209/C3 6209/C3 6210/C3 6212/C3 6213/C3

Axially-locked bearings

Inner bearing cover As standard, locked at D-end

Bearing seal Axial seal as standard, radial seal on request

Lubrication Regreasable bearings, regreasing nipples M6x1

SPM-nipples As standard

Rating plate Material Stainless steel, SS-EN 10088, 0.5 mm

Terminal box Frame material Cast iron EN-GJL-200/GG 20/GRS 200

Cover material Cast iron EN-GJL-200/GG 20/GRS 200

Cover screws material Steel 8.8, zinc electroplated and chromated

Connections Cable entries 2xM40 2xM40 2xM63 2xM63 2xM63

Terminals 6 terminals for connection with cable lugs (not included)

Cable glands Cable flanges as standard, cable glands as option

Fan Material Polypropylene. Reinforced with 20% glass fibre.

Fan cover Material Hot dip galvanized steel


Surface treatment Two-pack polyester powder paint, ≥ 100 µm

Stator winding Material Copper

Insulation Insulation class F

Winding protection 3 PTC thermistors as standard, 150°C

Rotor winding Material Pressure die-cast aluminum

Balancing method Half key balancing as standard

Key ways Closed key way

Heating elements On request 25 W 50 W 50 W 50 W 50 W

Drain holes Standard, open on delivery

Enclosure IP 55, higher protection on request

Cooling method IC 411


2

www.abb.com/motors&generatorsonline.abb.com/bol

9AK

K10

4464

EN

04-

2008

Low Voltage MotorsManufacturing sites (*) and some of the larger sales companies.

AustraliaABB Australia Pty Ltd601 Blackburn RoadNotting Hill VIC 3168Tel: +61 (0) 8544 0000Fax: +61 (0) 8544 0001

AustriaABB AGClemens Holzmeisterstrasse 4A-1109 WienTel: +43 (0) 1 601 090Fax: +43 (0) 1 601 09 8305

BelgiumAsea Brown Boveri S.A.-N.V.Hoge Wei 27BE-1930 ZaventemTel: +32 (0) 2 718 6311Fax: +32 (0) 2 718 6657

CanadaABB Inc., BA Electrical Machines10300 Henri-Bourassa Blvd, West, Saint-Laurent, QuebecCanada H4S 1N6Tel: +1 514 832-6583Fax: +1 514 332-0609

China*ABB Shanghai Motors Co., Ltd.88 Tianning RoadMinhang(Economical and Techno-logical Development Zone) 200245 Shanghai Tel: +86 21 5472 3133Fax: +86 21 5472 5025

ChileAsea Brown Boveri S.A.P.O.Box 581-3SantiagoTel: +56 (0) 2 5447 100Fax: +56 (0) 2 5447 405

DenmarkABB A/SAutomation ProductsEmil Neckelmanns Vej 14DK-5220 Odense SØTel: +45 65 47 70 70Fax: +45 65 47 77 13

Finland*ABB OyMotorsP.O.Box 633FI-65101 VaasaTel: +358 (0) 10 22 11Fax: +358 (0) 10 22 47372

FranceABB EntrelecZA La Boisse BP 90145300 Rue des Prés-SeigneursFR-01124 Montluel CedexTel: +33 4 37 40 40 00Fax: +33 4 37 40 40 72

GermanyABB Automation Products GmbHMotors & DrivesWallstaedter Strasse 59DE-68526 LadenburgTel: +49 (0) 6203 717 717Fax: + 49 (0) 6203 717 600

Hong KongABB (Hong Kong) Ltd.Tai Po Industrial Estate,3 Dai Hei Street,Tai Po, New Territories,Hong KongTel: +852 2929 3838Fax: +852 2929 3505

India*ABB Ltd.32, Industrial Area, N.I.TFaridabad 121 001Tel: +91 (0) 129 502 3001Fax: +91 (0) 129 502 3006

IndonesiaPT. ABB Sakti IndustriJL. Gajah Tunggal Km.1Jatiuwung, Tangerang 15136Banten, IndonesiaTel: + 62 21 590 9955Fax: + 62 21 590 0115 - 6

IrelandAsea Brown Boveri LtdComponents DivisionBelgard RoadTallaght, Dublin 24Tel: +353 (0) 1 405 7300Fax: +353 (0) 1 405 7327

Italy*ABB SACE SpALV MotorsVia dell' Industria 18IT-20010 Vittuone, MilanoTel: +39 02 90341Fax: +39 02 9034 7289

JapanABB K.K.26-1 Cerulean TowerSakuragaoka-cho, Shibuya-kuTokyo 150-8512Tel: +81 (0) 3 578 46251Fax: +81 (0) 3 578 46260

Korea ABB Korea Ltd. 7-9fl, Oksan Bldg., 157-33Sungsung-dong, Kangnam-ku Seoul Tel: +82 2 528 2329Fax: +82 2 528 2338

MalaysiaABB Malaysia Sdn. Bhd.Lot 608, Jalan SS 13/1K47500 Subang Jaya, SelangorTel: +60 3 5628 4888Fax: +60 3 5631 2926

MexicoABB México, S.A. de C.V.Apartado Postal 111CP 54000 Tlalnepantla Edo. de México, MéxicoTel: +52 5 328 1400Fax: +52 5 390 3720

The NetherlandsABB B.V. Dept. LV motors (APP2R)P.O.Box 301NL-3000 AH RotterdamTel: +31 (0) 10 4078 879Fax: +31 (0) 10 4078 345

NorwayABB ASP.O.Box 154 VollebekkNO-0520 Oslo Tel: +47 22 872 000Fax: +47 22 872 541

RussiaABB Industrial & Building Systems Ltd.Business Centre "Krugozor"Obrucheva 30/1, Building 2Moscow 117861Tel: +7 495 960 2200, 956 93 93Fax: +7 495 960 2209, 230 63 46

SingaporeABB Industry Pte Ltd2 Ayer Rajah CrescentSingapore 139935Tel: +65 6776 5711Fax: +65 6778 0222

Spain*Asea Brown Boveri S.A.Automation Products - Fábrica MotoresP.O.Box 81ES-08200 SabadellTel: +34 93 728 8500Fax: +34 93 728 8741

Sweden*ABB ABLV MotorsSE-721 70 VästeråsTel: +46 (0) 21 329 000Fax: +46 (0) 21 329 140

SwitzerlandABB Schweiz AGNormelec/CMC ComponentsMotors&DrivesBadenerstrasse 790PostfachCH-8048 ZürichTel: +41 (0) 58 586 0000Fax: +41 (0) 58 586 0603

TaiwanABB Ltd.6F, No. 126, Nanking East Road, Section 4iTaipei, 105 Taiwan, R.O.C.Tel: +886 (0) 2 2577 6090Fax: +886 (0) 2 2577 9467

ThailandABB Limited (Thailand)161/1 SG Tower, Soi Mahadlekluang 3,Rajdamri, Bangkok 10330Tel: +66 2 665 1000Fax: +66 2 665 1042

The United KingdomABB LtdDrives, Motors and MachinesDaresbury ParkDaresbury, WarringtonCheshire, WA4 4BTTel: +44 (0) 1925 741 111Fax: +44 (0) 1925 741 212

USAABB Inc.Low Voltage Motors16250 W. Glendale DriveNew Berlin, WI 53151Tel: +1 262 785 3200Fax: +1 262 780 8888

VenezuelaAsea Brown Boveri S.A.P.O.Box 6649Carmelitas, Caracas 1010ATel: +58 (0) 2 238 2422Fax: +58 (0) 2 239 6383

Prin

ted

in F

inla

nd, 0

5-20

08/5

000,

Waa

sa G

raph

ics

Cover for Process Performance MotorsContents Efficiency values New Cast Iron Motors M3BP 160 to 250New featuresTechnical dataDimension drawingsRating plates and terminal boxMotors in brief

New Cast Iron Motors M4BP 160 to 250New featuresTechnical dataDimension drawingsRating plates and terminal boxMotors in brief

Contact information

process performance motors...abb lv motors / lv process performance motors en 04-2008 3 eff1 eff3...

Documents