Process Of Reverse Osmosis Plant

Raw Water Feed Pump: Raw Water pump is used to feed the water to Filtration System at required Pressure from water source.

Raw Water Tank

To Filtration System

Raw Water Pump

Source of Water

Feeding Water

Pressure Sand Filter

Activated Carbon Filter

Pressure Sand Filter : PSF consist of FRP / MS / SS Vessel with Frontal Pipe, Multi Port Valve or Conventional Valve, also media layer of Pebbles, Gravels, Cylex, Sand Media. PSF is used for reduction of suspended solids.

Activated Carbon Filter : ACF consist of FRP / MS / SS Vessel with frontal pipe, Multi port Valve or Conventional Valve, & Activated Carbon layer. ACF is used for reduction of organic maters & chlorine.

From Raw Water Pump

To Dosing

Filtration System

Dosing Systems : Dosing Systems are mainly used for the prevention of Scale formation by using Anti Scalant Chemicals. Other Dosing Systems are Chlorination, De chlorination, PH Dosing, SMBS, Acid Dosing etc…

From Filtration System To Micron Cartridge Filter

Dosing System

From Dosing System To High Pressure Pump

Micron Cartridge Filter

MCF: MCF are used to filter out Physical Impurities in micron rating from feed water.

From High Cartridge Filter To Reverse Osmosis Module

High Pressure Pump

High pressure Pump: HPP is mainly used to transfer pre-treated water to RO module at required pressure.

From High Pressure Pump

Product Water

Reverse Osmosis Module

Product Water Tank

Product Water Tank

Reject Water Tank

Reject Water Tank

Our Control Panel

Online Conductivity Meter

Auto-Manual Switch

Volt-Ampere Meter

Product & Reject Flow Meter

Pressure Gauge

Feed Pump Switches

High Pressure Pump Switches

RO Applications

•Boiler Feed water Treatment•Food & Beverage•Power Generation Industries•Sea water Desalination•Recycling Industrial Effluent & Domestic Sewage•Pharmaceutical industries •Chemical & Dyes Industries•Pulp & Paper Industries•Drinking Water Application

Some of our RO Plants

Thank You