process integration (pi) user guide for setting up early ... · sap ® february 2014 process...
TRANSCRIPT
SAP ® February 2014
Process Integration (PI) User Guide for setting up Early Year
Update 2014 Interface Version 1.0
Contents Process Integration (PI) User Guide for setting up Early Year Update 2014 Interface ................................. 1
1. HOW TO DOWNLOAD PI CONTENT ................................................................................................... 2
1.1 PI Configuration for new EYU scenario ........................................................................................... 3
2. Setting up of Receiver HR_GB_EFO_RESP_OUT ................................................................................... 9
3. Setting up EYU for 2014 ........................................................................................................................ 9
1
SAP ® February 2014
1. HOW TO DOWNLOAD PI CONTENT
GO to SAP Service Marketplace:
http://service.sap.com/sp-stacks
Then follow the path given below
GO to SAP Service Marketplace: http://service.sap.com/sp-stacks
Then follow the path given below SAP Software Distribution Centre Download Support Packages and Patches A-Z Index Choose “E” for ERP ESR Content (XI Content) Click on XI Content E-Filing GB
Download the File Patch0 for XI Content E-Filing GB 1.0 SP 26 To download the File SAP HR Files, use the following path SAP Software Distribution Centre Download Support Packages and Patches A-Z Index Choose “E” for ERP ESR Content (XI Content) XI Content HR Depending on the system you are on.
SAP HR 600 or
SAP HR 604 Please download the latest patch.
1.1 PI Configuration for new EYU scenario
Note: If you already have EYU configured for 2013, please go to section 3 of this guide. Otherwise follow sections 1 and 2 taking care to use the 2014 objects which are highlighted. STEP 1: Open the Configuration Wizard
2
SAP ® February 2014
STEP 2: Choose “Party Communication”
STEP 3:
3
SAP ® February 2014
STEP 4: Here the Service “Q43_002” is the Service of our DEV R/3 System.
INTERFACE: HR_GB_EFO_EYU_OUT_14 NAMESPACE: http://sap.com/PI/HR
STEP 5: Choose “Communication Party”
4
SAP ® February 2014
STEP 6: Interface Name : HR_GB_EFO_EYU_IN_14
STEP 7:
5
SAP ® February 2014
STEP 8: INTERFACE NAME : HR_GB_EFO_EYU_OUT_14
STEP 9: INTERFACE NAME: HR_GB_EFO_EYU_IN_14
SAP ® February 2014
STEP 10:
STEP 11: SCENARIO NAME : PAYE_EYU_GB_14
7
SAP ® February 2014
2. Setting up of Receiver HR_GB_EFO_RESP_OUT
If the receiver HR_GB_EFO_RESP_OUT is already set up for EOY/ IYMV/ RTI configuration, the same can be re-used.
3. Setting up EYU for 2014
If you have already configured EYU for 2013, follow the next section to set up EYU for 2014.
3.1 Configure a new receiver determination
1. Select the Configuration scenario you have in your system. E.g. PAYE_EYU_GB_13
2. Right click on receiver determination and copy objects
3. Add the interface and namespace as shown above and copy. A new page
opens as shown below.
4. Now right click where is shows “Not Defined”
5. Click New Specific
6. Enter the details shown in the screen shot below
You have now created an interface determination object. Save it. Create a receiver agreement Place the cursor on the receiver agreement field and right click.
Choose New Specific and press create. In the next screen that opens choose your communication channel, e.g. SubmitEOYR
Save the configuration. Your Receiver determination page should now look as follows:
Save and activate your change list. You have now configured the EYU scenario for 2014