Sherif Mohamed NourAddress: 6, 592 st., Sidi Bishr Keply, Al-Montazah, Alexandria, Egypt.Phone number: Cellar phone +201227239797 \ +94755891649 Home phone +20235606859E-mail: sherif19862@yahoo.com / sherif19862@gmail.comSkype: sherif19862

Career SummaryExperienced Process Engineer looking for his next career move in the oil and gas industry in the field of Upstream Process Engineering, for onshore and offshore fields, green or brown fields and for all project execution phases (from feasibility study to detailed engineering phase and plants modifications and debottlenecking) utilizing wide variety of engineering software like HYSYS and using different calculation methods and techniques driven from international standards like NFPA, API, ASME, IEC, ISO, Shell DEP, etc. in addition to internal standards.

ExperienceProcess Engineer – WorleyParsons Qatar WLL. 2014 - PresentParticipating as Process engineer in the Maersk Oil Qatar (MOQ) DES contract Process engineering team, working in multiple brownfield modifications for the existing 300,000 SBPD Al-Shaheen Field offshore platforms and facilities.• Personally accountable for the development of accurate piping & instrumentation diagrams (P&IDs), process flow diagrams (PFDs) and utility flow diagrams (UFDs).• Responsible for the preparation of the process design basis and process description.• Generating equipment data sheets, fluid list, equipment list and line list.• Contributing to the work of the engineering team through process simulation, flare system design and piping hydraulic studies using various simulation softwares.• Demonstrating skill and aptitude completing sizing calculations for pressure safety valves and thermal relief valves in addition to depressurization calculations.• Fully accountable for the accurate checking of vendor documents, estimating project scope of work, man hours and schedules.

Process Engineer – Eni Tecnomare Egypt Ltd. 2008 - 2014

• Personally accountable for the development of accurate piping & instrumentation diagrams (P&IDs), process flow diagrams (PFDs), utility flow diagrams (UFDs), process safety diagrams (PSDs) and block flow diagrams (BFDs).• Responsible for the preparation of the process design basis, process description, flare and blow down report.• Generating heat & material balance and performing equipment data sheets, fluid list, equipment list, line list and utility summary.

• Conducting pressure vessel sizing, pump hydraulics and the design of shell & tube heat exchanger.• Contributing to the work of the engineering team through process simulation, flare system design, pipeline hydraulic studies and flow assurance studies using various simulation softwares.• Demonstrating skill and aptitude completing sizing calculations for pressure safety valves and thermal relief valves in addition to depressurization calculations.• Utilize knowledge to produce designs of gas dehydration, dew point control and condensate stabilization units.• Participating in HAZOP, HAZID and SIL studies and managing HAZOP actions close out.• Generating Hazardous Area Classification reports and layouts, fire fighting layouts, escape route layouts and fire water demand studies.• Successfully managing proposals, reviewing invitation to bid documents, delivering process outputs to other disciplines and preparing FEED verification report.• Fully accountable for the accurate checking of vendor documents, estimating project scope of work, man hours and schedules.

By performing the above mentioned activities, I was able to develop various projects in a fast track progress (from Feasibility study phase to FEED \ Details within 6 to 8 months period), either in consecutive or in parallel projects approach, contributing in developing and consolidating the company position in the oil and gas engineering market in Egypt.For the previous years I have been working in the following projects:

Emry Deep Oil Development Project (onshore – Basic & FEED Study) o Position: Process Engineer for new process and utility facilities design.o Client: IEOC (Eni), Egypt.

Meleiha Gas Transport Pipeline (onshore – Feasibility Study) o Position: Process Engineer for preliminary flow assurance review.o Client: Eni, Italy / IEOC/Agiba, Egypt

El-Gamil Plant Safety Improvement (onshore – HAZOP) o Position: Process Engineer for HAZOP Process Review.o Client: Eni, Italy / Petrobel, Egypt.

Emry Deep Oil Development Project (onshore – Feasibility Study) o Position: Process Engineer for process equipment verification.o Client: IEOC (Eni), Egypt.

Aghar Polymer Injection Project (onshore – Detailed Engineering) o Position: Process Engineer for units interconnecting lines.o Client: Eni, Italy / Agiba, Egypt.

DEKA Project (offshore – Feasibility Study/FEED)o Position: Process Engineer for subsea development alternatives including

platforms top side modifications.o Client: Eni, Italy.

Seth – El-Gamil Debottleneck Project (onshore – FEED)o Position: Process Engineer for El-Gamil Plant modifications.o Client: Eni, Italy.

Meleiha Deep Oil Project (onshore - Verification)o Position: Process Engineer for Meleiha Oil Plant Verification Study

(Conceptional level).o Client: Agiba, Egypt.

Baltim Compression Upgrading Project (onshore - Conceptual)o Position: Process Safety Engineer for Fire Fighting System Evaluation

(Conceptional Design level).o Client: Petrobel, Egypt.

Seth Development Project (offshore - FEED)o Position: Process Safety / Process Engineer for topside facilities design.o Client: Tecnomare SPA, Italy /Petrobel, Egypt.

Belayim Water Disposal Plant Project (onshore - FEED)o Position: Process Safety / Process Engineer for safety design of the project

facilities.o Client: ENI SPA, Italy /Petrobel, Egypt.

Denise B Development Project (offshore - FEED)o Position: Process / Process Safety Engineer for topside facilities design.o Client: Tecnomare SPA, Italy /Petrobel, Egypt.

On-job Training in Tecnomare SPA (general)o Position: Process Engineer for pilot projects and various assignments.o Client: Tecnomare SPA.

Production Engineer – Prokem Specialty Chemicals 2007 –2008

• Supervising the work progress in the production units.• Ensure application of the company ideology and goals.• Attending meetings to put the production strategy in daily and monthly basis.

During my period in the company, I was one of the main contributors in achieving the first million pound in one month sales by increasing the plant workers productivity by 30% while ensuring the satisfaction of the workers.

EducationB.Sc. in Chemistry, Cairo University 2002-2006

Basic Oil and Gas training, Eni Corporate University, Milan, Italy 2008Natural Gas Processing Technology, OGS, Egypt 2009 Corrosion Control Techniques & Material Selection, Enppi, Egypt 2010

SkillsLanguages:

Arabic Mother tongueEnglish Very good commandSpanish Basic commandGerman Basic command

Computer:

• Professional knowledge in MS Word, MS Excel, MS PowerPoint, AutoCAD, PipeSim, HTRI, HYSYS, PRO/II, Flaresim, Aspen exchanger Design & Rating and Aspen Flare System Analyzer (Flarenet).• Currently in self training for PVTsim, OLGA V.7 and Pipenet.• Exposed to MATLAB, DNV PHAST and C++.

Memberships:- AMIChemE (starting 2012, currently applying for Chartered Engineer status).- ACS Regular Member (starting 2011).- Egyptian Syndicate for Scientific Professions Membership (starting 2006).