PRO SHOP SUPPLIES

1.800.235.8324 www.techlineproducts.com

hd™ Ball plug • Custom-Color™ Pigments

insta-PatCh™ Ball rePair • ultra-Buff™ Polishing ComPound

1.800.235.8324 www.techlineproducts.com made in u.s.a.

• has proven successful in reactive resin, urethane, and polyester bowling balls.

• excellent adhesion to all cover stock materials.

• extremely crack, chip, and impact resistant.

• Virtually no post-cure shrinkage so you will not have to worry about separation or flat spots.

• no air bubbles as it allows trapped air to escape before it cures.

• drills straight and true without bit chatter or chipping around the rim.

• Cures in 6-8 hours at recommended temperatures.

• 3:1 ratio of resin compound to hardener.

• available in 2-gallon kits.

1007-00 2-gallon hd™ Kit (3 half-gallon HD™ resin compound, 1 half-gallon HD™ hardener)

1023-05 hd™ resin Compound (1 half-gallon)

1022-11 hd™ hardener (1 half-gallon)

HD™ Ball Plug HR™ Hardener

these pumps are precalibrated for use with hd™ and hr™ Ball Plug to dispense the proper 3:1 ratio of resin compound to hardener.

1103-05 hd™ Pump set (for item no. 1007-00)

1118-08 hr™ Pump set (for item no. 1005-00)

Ball Plugging Pumps

• leak-free and easy to use, exhibit excellent adhesion to all bowling ball cover stocks.

• each box of plugging dams contains 25 concentric units that pull apart into 150 round or 100 oval dams.

1302-08 round thumb Plugging dams (150)

1302-11 oval finger Plugging dams (100)

Ball Plugging Dams

Perfect for ball plugging. Provides room for mixing and the markings for measuring. Contains 50 mixing cups.

1304-05 5oz. Ball Plug mixing Cups

5oz. Mixing Cups

• designed to produce perfect plugs in heat-sensitive situations where other products fail.

• great for oversize holes; designed to do the job without two-staging.

• Plugs holes in thick urethane and resin cover stocks without cracking, chipping, or color burnout.

• Cures in 10-16 hours at recommended temperatures. Note: HR™ Hardener is compatible with any ball type, but we do not recommend using it in polyester balls, small holes in urethane, or small holes in resin bowling balls since cure time will extend beyond 16 hours.

1005-00 2-gallon hr™ Kit (3 half-gallon HD™ resin compound, 1 half-gallon HR™ hardener)

1022-05 hr™ hardener (1 half-gallon)

• allows for fast repair of scratches, nicks, and gouges in ball surfaces.

• extremely impact resistant when cured and exhibits excellent adhesion to all ball surfaces.

• repairs long scratches in one application without running, even on non-horizontal surfaces.

• Cures in about 1 hour at room temperature, and in about 5-10 minutes with an external heat source.

• Compatible with ball plug tints and pigments in small amounts.

• 4:1 ratio of resin to hardener.

• each 15-ounce insta-Patch™ Kit will repair approximately 60 bowling balls.

• the insta-Patch™ Kit includes one 12-ounce resin, one 3-ounce hardener, 50 graduated mixing cups, and stir sticks.

1310-05 insta-Patch™ Kit

Insta-Patch™ Kit

Perma-fill™ is a paste engraving fill that is totally permanent and will not discolor, fall out, or absorb fluids from the lanes.

application is easy with the included squeegee. Just place a dab in the center of the engraving and wipe back and forth in all directions. allow it to dry for a few minutes and simply wipe away excess with a damp cloth. solvent-free and non-toxic.

1610-04 lightning Yellow Perma-fill™ (1oz.)

1610-13 arctic White Perma-fill™ (1oz.)

Perma-Fill™ Engraving Fill

1.800.235.8324 www.techlineproducts.com made in u.s.a.

formulated from pigments, not dyes, tech-line Custom-Colors™ allow you to create extremely accurate matches in any type of bowling ball. the pigments we use are similar to those used by the bowling ball manufacturers. Produce opaque colors at high concentrations and translucent colors at low concentrations. use with the tech-line Color match guide to make matching a ‘snap’.

the Custom-Color™ match Kit includes each of the 13 colors listed, but colors are also sold separately.

eliminate waste by pouring excess plug into the Plug saver tray. When cured, just ‘pop’ the small plug slugs out of the tray and use them in future plugging projects. oversize holes can be difficult to plug because the large mass of curing material creates excess heat. By using the plug slugs, less new plug material is needed to fill the hole, so the level of heat is reduced.

1205-05 Custom-Color™ match Kit (all 13 colors)

1202-01 red

1202-04 Blue

1202-07 green

1202-10 Purple

1202-13 magenta

1202-16 orange

1202-19 Yellow

1202-22 Brown

1202-25 Black

1202-28 White

1202-31 silver Pearl

1202-34 gold Pearl

1202-37 teal

1311-05 Plug saver tray

Custom- Color™ Match

Kit

Plug Saver Tray

eliminates air bubbles. simply spray it on the plug surface and watch the air bubbles burst. it is available in a 4-ounce bottle with a fine-mist sprayer.

1303-03 4oz. Bubble Buster air release

Bubble Buster Air Release

matching fluorescent bowling balls is a breeze with tech-line’s fluorescent Color Kit. formulated from pigments, not dyes. allows you to create extremely accurate matches in any fluorescent bowling ball. the fluorescent Color Kit includes each paste color listed (2 white). Colors also sold individually.

1203-05 fluorescent Color Kit (all 7 colors)

1203-06 fluorescent Blue

1203-07 fluorescent green

1203-08 fluorescent red

1203-09 fluorescent orange

1203-10 fluorescent Yellow

1203-11 fluorescent Pink

1203-12 fluorescent White

Fluorescent Color Kit

8/8oz. Jars

the tech-line Bevel Knife has a 4-inch steel blade for beveling finger and thumb holes. the steel blade is securely fitted into a wood handle that is wrapped with a coil brace to ensure strength and durability.

1404-05 3-edge Bevel Knife

Bevel Knife

a reversible and replaceable steel blade makes the extractor™ the most practical insert puller available. solid steel construction for maximum durability. Comfortable ball handle fits in the palm of your hand.

1406-15 7/8” extractor

1406-50 7/8” Blade

1406-10 1-1/8” extractor

1406-45 1-1/8” Blade

Extractor Insert Puller

• features a hybrid blend of wax and polishing compounds. this technology produces an ultra high gloss on any type of bowling ball.

• designed for maximum compatibility. Can be used in virtually all polishing machines.

• each case contains 2 blocks of polishing compound.

“ Not only does UltraBuff™ do a great job polishing, but it also gives the ball a little more skid-snap reaction. I have started using it on my own equipment with very good results and our customers are very happy also.”

~ Rich Orf (Ray Orf’s Pro Shop)

5106-05 ultraBuff™ Ball Polishing Compound (2-Pack)

UltraBuff™ Ball Polishing Compound

3/4 oz. bottles

are You MOTIvated? Check out our motiV™ brand bowling equipment at

WWW.motiVBoWling.Com

1.800.235.8324 www.techlineproducts.com

18570 trimble Court, spring lake, mi 49456 Ph 616.850.9868 fX 616.846.1473