pro iii ladder rack - r.h. scalesrhscales.com/catalog/racks_truck_van.pdfmore than traditional...

TRUCK AND UTILITY RACKS

• Front legs adjust To Fit any bed length• Rack Height Can be Raised For Taller Crew Cabs• Mounting Plates adjust To Fit Different bed Widths

• Yellow Zinc Dichromate Undercoat On The Rack and Finish On Hardware Has 5X Greater Rust & Corrosion Resistance.

• Abrasion and Corrosion Resistant • “Super Polyester” Marine-Grade Powder Paint.• Swaged Joints and Fully Gusseted Cross bars

For Superior load Capacity.• Easy to assemble With Self-locking Nuts.*

PRO III LADDER RACK1000 LB. CAPACITY!

MODEL L80000 FITS ALL FULLSIZE TRUCKSMODEL L80002 FITS ALL MID-SIZE & COMPACT TRUCKS

* OPTIONAL NO-DRILL, CLAMP-ON MOUNT KIT #A31580 AVAILABLE

High-Strength Rails FormSafety Grab Handles

Removable RearCross Bar(No Tools Required)

High-Strength SideChannel Reinforcement

New Rugged 14˝ LongAdjustable Mounting Plates

High Tensile Strength14-Gauge Steel Alloy1-5/8˝ Tubing

Smooth TubingComponentsReduce Wind Noise

176

THULE IRONMAN #360HEAVY DUTY STEEL TRUCK RACK

1800 lb. Capacity

KARGOMASTER #L90000 PRO IVHD ALUMINUM TRUCK RACK

1000 lb. Capacity • Big 2" Dia x .120" Tk. T-6 Aircraft Alumimum Tubing Is The Strongest Available• 1000 Lb. Cargo Capacity • Nationwide Lifetime Frame Warranty• Front Legs Adjust To Fit Any Bed Length • Mounting Plates Allow Width Adjustment To Fit All Full Size Trucks• Fully Gusseted Cross Bars • Removable Rear Cross Bar • High-Strength Side Channel Reinforcement• Rugged 17" Long Mounting Plates • Optional - 4th Crossbar (#31690) • Optional - No Drill Mounts (#31580)• Abrasion and Corrosion Resistant Polyester Marine-Grade Powder Paint• Easy to Assemble With Self-Locking Nuts • Easily Removed With 4 Bolts• Swagged Joints And Fully Gusseted Cross Bars For Superior Load Capacity • All Stainless Steel Fasteners

Heavy duty steel gusset load supports connect rail, cross, and leg bars. • Double center load bars provide the strength and stability to carry up to 40%

more than traditional single bar truck racks. • 13 guage 2" square steel addsover 20% more load bearing steel than 2" round bar racks. • Full length bedrail better utilizizes bed wall capacity and disperses loads evenly for addedstrength•and safety. • Inside-Out rust resistant coating covers all steel sur-faces for longer product life. • Hardened high gloss powder coat finish providesa second layer of protection to all outer surfaces. • Swing or removable rearbar allows for tail items to be loaded easily and conveniently into the bed.

• Universal truck fit ensures a precise fit on all full size and compact trucks through an innovative adjustable rack mounts.• Quick and easy installation requiring no cutting and limited assembly.


177

KARRITE VAN LADDER RACKS

98701 VAN LADDER RACK - 2 BAR

98731 VAN LADDER RACK - 3 BAR

98740 VAN MASTER - 2 BAR

98750 VAN MASTER - 3 BAR

Karrite Industrial Two Bar Van Racks are a strong and economical ladder rack solutionthat is constructed of heavy-duty 13 gauge, welded steel with a durable white powdercoat finish that will resist scratches and rust. Adjustable cross rails which are 1.5" diam-eter and extend from 50" to 72" make it easy to install on most vans with rain gutters.The Rack has a load carrying capacity of up to 500 pounds (750 lbs. on 3 Bar System).It features pre-drilled end plates for versatile height adjustment and easy use of tie-down straps. An adjustable ladder bracket is included with each cross rail.

KARRITE HEAVY-DUTY VAN MASTER Karrite heavy-duty Van Master ladder racks are economical and sturdy ladder rack systems. Constructed of heavy-duty 14 gauge welded steel with 1.5" square cross rails,it has a load carrying capacity of up to 750 pounds, (1000 lbs. on 3-Bar System). Thefinish is a durable, white powder coat that will resist scratches and rust. The Karrite vanladder rack fits most vans with rain gutters and the cross rails may be cut to size for acustom fit. An adjustable ladder bracket is included with each cross rail.

• Two Bar System Part No. 98740750 lb capacity (2 bar system)

• Three Bar System Part No. 987501000 lb capacity (3 bar system)

• Rack available in white only• 1.5" square cross rails• Rack fits most vans with rain gutters.

Cross rails may be cut to size to custom fit vehicle• Adjustable ladder bracket with each cross rail• UPS-able

• Heavy-Duty Center Load Bar Part No. 98746(Increases 2-Bar System to 1000 lb. Capacity)

Note: Van Master System does not fit '96-99 Chevy GM T600,Chevy Astro, GM Savana, GMC Safari or vans with sliding doors

• Two Bar System Part No. 98701 500 lb capacity (2 bar system)

• Three Bar System Part No. 98731 750 lb capacity (3 bar system)

• Rack available in white only• 1.5" diameter round cross rails• Rack fits most vans with rain gutters due to

adjustable cross rails (adjust from 50" up to 72")• End plates are pre-drilled for height adjustment

and easy use of tie-down straps• Adjustable ladder bracket included with each cross rail

• 98746 Center Load Bar (Increases 2-Bar System to 750 lb. Capacity)• 98705 Astro, Safari adaptor (4pk) use w/98701 • 98735 Astro, Safari adaptor (6pk) use w/98731 • 98712 Center Bar use w/98701 '92-present Ford Econoline

'96-99 Chevy GM T600 and GMC Savana• 98706 '96-99 Chevy GM T600 & GMC Savana adaptor

(4pk) use w/98701W• 98707 '96-99 Chevy GM T600 & GMC Savana adaptor

(2pk) use w/98706W & 98731W• 00975 Sliding door adaptor

Note: 98731 does not fit '92-present Ford Econoline '96-99 Chevy GM T600 andGMC Savana, use 98701 + 98712 for the three bar solution


98760 DUO TRUCK LADDER RACK

KARRITE DUO TRUCK LADDER RACK

Karrite Duo Pickup Truck Ladder Rack System is an adjustable, multi-position carrying systemthat installs easily on most trucks. Constructed of heavy-duty 14 gauge welded steel with 1.5"square main tubes, this rack can carry up to 250 pounds. The finish is a durable black powdercoat that is resistant to scratches and rust. The Karrite Duo allows for easy adjustment with atwo-position feature that lets you customize the rack to accommodate various loads. Loadarms are fully adjustable from 22" to 37". Installs simply on most pickups with basic hand tools.

98890 FULL-FRAME SYSTEM

KARRITE FULL-FRAME TRUCK LADDER RACK SYSTEMKarrite Full-Frame Pickup Truck Ladder Rack System is a heavy-duty, 13 gauge steel con-struction rack system that will hold half the total rated load capacity of your truck. The rack ismade of both round and square tube sections that have been powder coated to provide protec-tion from scratches and rust. This high-capacity rack system fits all pickup trucks with beds 6.5'to 8' long. Support posts attach easily to the top of the truck bed side walls with basic handtools and minimal drilling. The rear bar is removeable for easier loading.

178

WHEN YOU PURCHASE A VANGUARD HEAVY DUTYTRUCK RACK, YOU CAN BE ASSURED

THAT YOU ARE GETTING THE HIGHEST QUALITYSTEEL RACK AVAILABLE.

ADJUSTABLE LADDER RACK W/ 2 POSITIONERS(SHOWN WITH RECOMMENDED #LR-HB HORIZONTAL BARS)

HEAVY DUTY CAP RACKSTO FIT CAB HEIGHT CAPS

PART# APPLICATION WGT.LRA ALL Chevy & GMC Full Size - Wide 54 LBS.

Chevy S-10 & GMC S-15 • DodgeDakota / Ram-50 • Ford Full SizeFord Ranger • Isuzu • Jeep ComancheMazda • Mitzubishi • Nissan • Toyota

LRA-1/2 One Half Set of AboveLRA-F ALL Ford F250/F350 SD Series 54 LBS.

(Includes LR-HB Horizontal Bars)

PART# APPLICATION WGTLRUNC Universal Application 62 lbs.LR-HB Horizontal Bars (Recommended)• Cab height style offers 25" of clearance

from foot plate to bottom of adjustable cross bar.

• Part No. 98760• Rack available in black only• 1.5" square main tubes• 250 lb capacity• Rack fits any size pickup truck• Easily adjustable "Two Position" feature (patent pending)

customizes rack to accomadate various loads• Load arms are fully adjustable from 22" to 37"• Rack is easily removed when not in use• Installs with basic hand tools and a drill

• Part No. 98790• Rack available in black only• Round and square tubing sections are

powder-coated for long life protection• Capacity equals half of truck bed load rating• Rack fits all pickup trucks with 6.5' to 8' beds• Rear bar is removable for easier loading• Support posts attach to top of truck bed side walls

with minimaldrilling• Installs with basic hand tools and a drill

179


1501100 RAIL MOUNT TRUCK RACK

PART# DESCRIPTION WGT

1501070 Buyers Floor Mount Pickup Truck Rack 47 lbs.


1501100 Buyers Rail Mount Pickup Truck Rack 155 lbs.

• Pickup Truck Ladder Rack• Fits Full-Size Domestic Pick-up Trucks with Long & Short Beds

DODGE 1500, 2500, 3500FORD F-150, F-250, F-350GM 1500, 2500, 3500

• High Impact "Wrinkle Style" Powder Coat w/Rust Inhibitor E-Coat• 1,000 lb. Capacity

1501070 PICKUP TRUCK RACK Rack slips into the truck bed mounting post and secures to the bed rail witha collared "U" bolt. When rack is removed, the "U" bolt and mounting post isall that remains, leaving bed free of unwanted fixtures.

• High gloss black powder coat finish • 1-3/4" square, 14-gauge steel tubing• Support arm telescopes from 24" to 35" for wider loads• 250 lb. load capacity • Compliments tool boxes and like accessories• Rack carries ladders both vertically and horizontally • Easy Installation:


1503005 Buyers Service Body Truck Rack 185 lbs.

1503005 SERVICE BODY RACK • Heavy-duty 14-gauge steel tubing • High gloss black powder coat finish• Adjustable cross rails • Removable rear bar for taller loads• Overall length: 152" • 1000 lb. capacity • Easy Installation:


1502023 Buyers Gutter Mount Racks 18 lbs.

1502023 GUTTER MOUNT RACKS • Mounts to rain gutter • 4" wide uprights made from 3/16" thick plate steel• 1-1/2" & 1-1/4" square 14-gauge steel tubing • 600 lb. capacity evenly distributed • 9/16" wrench is only tool required for installation• Adjusts from 41" to 72" • High gloss white powder coat finish


180

TRACRAC SLIDING TRUCK RACK

STANDARD SYSTEM INCLUDES: • 1 SET OF BASE RAILS • 1 SET OF OVERHEAD RACKS • 4 CROSSBAR TIEDOWNS

PART# PRODUCT APPLICATION

21500 Base Rail A Ford F150/GMC Full-Size Long Bed21500 Base Rail C Ford F150/GMC Full-Size Short Bed21010 Base Rail SDL Ford Super Duty Long Bed21510 Base Rail SDS Ford Super Duty Short Bed21000 Base Rail Dodge Ram Long Bed21501 Base Rail Dodge Ram Short Bed21600 Base Rail 00-04 Toyota Tacoma Short Bed21601 Base Rail 00-04 Toyota Tacoma Long Bed21011 Base Rail 07+ Toyota Tundra Long Bed21610 Base Rail 07+ Toyota Tundra Short Bed21611 Base Rail 07+ Toyota Tundra XShort Bed21010 Base Rail D Compact Short Bed28100 Utility Body -Complete Front & Rear Std. 17” Tall, w 2’ Rails28101 Utility Body -Complete Front & Rear Std. 22” Tall, w 2’ Rails22500 Overhead Rack - Full Size Ford F150 / GMC / Toyota Tundra22510 Overhead Rack - Super Duty Ford Super-Duty / Dodge Ram Trucks22501 Overhead Rack - Compact Compact Trucks / Toyota Tacoma25100 Sliding Baserail Tie-Downs25700 Locking TracKnobs23000 Cargo Holder / Window Screen Fullsize Trucks23001 Cargo Holder / Window Screen Compact Trucks22666 Cantilever Extension Fullsize Trucks22668 Cantilever Extension Compact Trucks25200 ToolBox Mount Kit25220 Sliding Fullsize DeepTracBox Fullsize Trucks25250 Non-Sliding Fullsize DeepTracBox

(Painted to match TracRac) Fullsize Trucks25221 Sliding TracBox Compact Trucks22910 CargoRac All Fullsize Trucks

TRACRAC SLIDES• Reposition or remove racks in seconds.

TRACRAC’S BUILT TOUGH• Rugged aluminum – no rust or corrosion.• Carries 1,000 lbs. – weighs just 77 lbs.

TRACRAC’S EASY-TO-INSTALL• Installs without drilling or bolting, on trucks with stake pockets.

TRACRAC’S VERSATILE• Carry lumber, ladders, building material, canoes and kayaks.

CARGORAC IS TOUGH• Rust-free 100% Aluminum Construction• Rugged 750 lb. Capacity (on most trucks)• Black powder coated finish

CARGORAC IS REMOVABLE• Remove overhead racks in minutes.• Remove your toolbox - leave at home.

CARGORAC IS DAMAGE-FREE• Mounts onto your side rails in seconds.• Compression mounts eliminate drilling / bolting.

CARGORAC IS VERSATILE• Works with toolboxes, under the rail bedliners. • One size fits all full size pickups.

TRACRAC CARGORAC

CUSTOM TRACRAC TRAC-TONNEAUS AVAILABLE!

See Page 185

#22910 - INCLUDES 2 OVERHEAD RACKS AND 4 TIE-DOWNSENTRY LEVEL PRICING

ONE SIZE FOR ALL FULL-SIZE PICKUP TRUCKS!

For a complete TracRac System please order both a base rail and overhead rack. Popular listings are below - Please call us for your application.

TracTonneauTonneau Cover for TracRacequipped pickup trucks.See page 185 for description.

181


PART# PRODUCT APPLICATION22940 T-RAC Pro Ford F150 / GMC22942 T-RAC Pro Ford Super-Duty / Dodge Ram22941 T-RAC Pro Dodge Dakota / Compact Trucks25000 T-RAC Pro 05+ Toyota Tacoma, 500 lb. Capacity22920 T-RAC Pro Toolbox Mount Kit

T-RAC IS TOUGH• Rust-free 100% Aluminum Construction• Rugged 750 lb. Capacity (on most trucks)

T-RAC IS REMOVABLE• Remove rack in minutes.• Remove your toolbox - leave at home.

T-RAC IS DAMAGE-FREE• Mounts onto your side rails in seconds.• Compression mounts eliminate drilling / bolting.

T-RAC IS VERSATILE• Works with toolboxes, under the rail bedliners.

T-RAC PRO

PART# PRODUCT DESCRIPTION29055 TracVan - Double 2 crossbars, 4 tiedowns29056 TracVan - Triple 3 crossbars, 6 tiedowns29555 TracVan - Single 1 crossbar, 2 tiedowns29900 TracGutter - Side Mount 4 adapter plates to mount

TracVan to truck caps.29901 TracGutter - Top Mount 4 adapter plates to mount

TracVan to gutterless vans.

TRACVAN IS TOUGH• Rust-free 100% Aluminum Construction• Rugged 750 lb. Capacity (on most trucks)

TRACVAN IS DAMAGE-FREE• Grip mounts onto your gutter in seconds.• Compression mounts eliminate drilling / bolting.

TRACVAN IS AERODYNAMIC• No wind noise!

TRACVAN IS VALUE!• Includes 4 sliding crossbar tiedowns

TRACVANTHE ULTIMATE VAN RACK

PART# PRODUCT DESCRIPTION29200 CapRac 2 Overhead Racks

4 Crossbar Tiedowns

• Rust-free Aluminum Crossbars• Powder-Coated ZEMAC Bases.

BREAKTHROUGH DESIGN• Sleek, low profile stance minimizes wind noise• Swivel bracket and wedge gaskets adapt to tapered cap roofs.• Dual concealed fasteners enable simple installation.

PREMIUM PERFORMANCE• Lightweight (26 lbs.)• Tiedowns slide / readjust with a twist to suit your cargo.

CAPRACPREMIUM TRUCK CAP RACK

PART# PRODUCT APPLICATION25854-01 Aluminum CabRac 07-09 Chevy/GMC

04-09 Ford F15007-09 Toyota Tundra

25854-02 Aluminum CabRac 04-06 Chevy/GMC25854-03 Aluminum CabRac 04-09 Dodge Ram25854-05 Aluminum CabRac 03-09 Ford Super-Duty25110 Optional Crossbar

Tie-Downs (Pair)

CABRAC IS TOUGH• Rust-free 100% Aluminum Construction• Stainless Steel Hardware

CABRAC IS DAMAGE-FREE• Mounts into stake pockets & clamps onto side rail• No drilling of truck bed - easy install!

CABRAC IS AERODYNAMIC• No wind noise! Reduced wind resistance.

CABRAC IS VALUE • Unique 3 Cross Member Window Guard

CABRACALUMINUM WINDOW GUARD

Year Model With Standard Bracket With 21” Toolbox Bracket

CHEVROLET/GMC04-09 Chevy Colorado & GMC Canyon 71104 71104B82-04 Chevy S-10 & GMC Canyon* 7110599-06 Chevy Silverado & GMC Sierra 71103 71103B2007 Chevy Silverado & GMC Sierra Classic 71103 71103B07-09 Chevy Silverado & GMC Sierra** 71106 71106B88-98 Chevy/GMC 71102 71102B68-87 Chevy/GMC* 71101

DODGE05-09 Dakota (including Quad Cab) 71302 71302B87-04 Dakota (including Quad Cab) 71301 71301B94-02 Dodge (except 2002 1500 Series) 71300 71300B02-09 Dodge 1500 Series 71303 71303B03-09 Dodge 2500/3500 71303 71303B68-93 Dodge* 71101

FORD MOTOR COMPANY75-96 Ford (also 97 F-250 HD & F-350 HD) 6.5' 71202 71201B75-96 Ford (also 97 F-250 HD & F-350 HD) 8' Bed 71201 71201B04-09 Ford F-150 71205 71205B97-03 Ford F-150 71203 71203B04-09 Ford F-150 Super Crew 5.5' Bed 71206 71206B00-03 Ford F-150 Super Crew 5.5' Bed 71204 71204B93-09 Ford Ranger 71208 71208B82-92 Ford Ranger 71301 71301B99-09 Ford Super Duty F-250 - F-550 71207 71207B

ISUZU82-95 Isuzu 71301 71301B

NISSAN05-09 Nissan Frontier 71302 71302B86-04 Nissan Hard Body & Frontier* 7110504-09 Nissan Titan 71501 71501B

TOYOTA84-95 Toyota 71301 71301B93-98 Toyota T100 71401 71401B95-04 Toyota Tacoma 71301 71301B05-09 Toyota Tacoma (2 parts) 71403-2 7340507-09 Toyota Tundra 71402 71402B99-06 Toyota Tundra 71401 71401B

* Tool Box Brackets are only available separately for this application.** 2007 + Chevy/GMC If truck is equipped with a cargo management system, it must be removed or modified.


PRORACK STYLE:STK Pro Rack truck racks offer stylish protection against personal injury orcab damage caused by shifting cargo. These tough truck racks provide asturdy structure to carry ladders, manage cargo and more.Many accessory brackets are available to mount lights, antennas and toolboxes in multiple configurations. Pro Rack truck racks come completewith installation hardware and brackets in one box.

PRORACK VERSATILITY:Multiple accessory brackets are available to mount strobes, light bars,arrow sticks, antennas and toolboxes in various configurations. Part numbers ending in a "B" include 21" tool box brackets (to accommodate most cross-bed style tool boxes). Tool box brackets mayalso be purchased separately. Extra wide tool boxes require a 31" long toolbox bracket which can only be purchased separately.

STK PRORACKTRUCK RACK

PERFECT FOR YOUR WORK TRUCK, PERSONAL TRUCK OR LARGE FLEET.

182

(31” Toolbox Brackets are available separately)

(See Following Pages)


Year Model Main Unit W/ Standard Bracket W/ 21” Toolbox Bracket

CHEVROLET/GMC04-09 Chevy Colorado & GMC Canyon 73000 73104 73104B82-04 Chevy S-10 & GMC S-15 73000 73301 73301B99-06 Chevy Silverado & GMC Sierra 73002 73103 73103B2007 Chevy Silverado & GMC Sierra Classic 73002 73103 73103B07-09 Chevy Silverado & GMC Sierra** 73003 73105 73105B88-98 Chevy/GMC 73002 73101 73101B68-87 Chevy/GMC 73002 73101 73101BDODGE05-09 Dakota (including Quad Cab) 73000 73301 73301B87-04 Dakota (including Quad Cab) 73000 73301 73301B68-93 Dodge 73002 73101 73101B94-02 Dodge (except 2002 1500 Series) 73002 73302 73302B02-09 Dodge 1500 Series 73002 73303 73303B03-09 Dodge 2500/3500 73002 73303 73303BFORD MOTOR COMPANY75-96 Ford (also 97 F-250 HD & F-350 HD) 6.5' Bed 73002 73202 73202B75-96 Ford (also 97 F-250 HD & F-350 HD) 8' Bed 73002 73200 73200B04-09 Ford F-150 73003 73205 73205B97-03 Ford F-150 73002 73203 73203B04-09 Ford F-150 Super Crew 5.5' Bed 73003 73204 73204B00-03 Ford F-150 Super Crew 5.5' Bed 73002 73204 73204B93-09 Ford Ranger 73000 73208 73208B82-92 Ford Ranger 73301 73301 73301B99-09 Ford Super Duty F-250 - F-550 73001 73201 73201BISUZU82-95 Isuzu 73000 73301 73301BNISSAN05-09 Nissan Frontier 73000 73301 73301B86-04 Nissan Hard Body & Frontier 73000 73301 73301B04-08 Nissan Titan 73002 73501 73501BTOYOTA84-95 Toyota 73000 73301 73301B93-98 Toyota T100 73002 73401 73401B95-04 Toyota Tacoma 73000 73301 73301B05-09 Toyota Tacoma 73000 7340507-09 Toyota Tundra 73003 73402 73402B99-06 Toyota Tundra* 73002 73401 73401B

* Tundra ProGuard requires drilling of the main unit.** 2007+ Chevy/GMC If truck is equipped with a cargo management system, it must be removed or modified.

PROGUARD SAFETYSTK Pro Guard cab guards deliver the safest cab guard design available.These tough cab guards are ideal for use on work trucks that carry largetools, equipment, construction materials and other possibly dangerouscargo. Pro Guard cab guard's flexible design enables cargo and ladders tobe secured and provides for mounting of toolboxes and lights.

PROGUARD FEATURES:• Can be Installed with Bedliners, Rail Caps and Toolboxes• Accommodates Most Pro Rack Accessory Brackets• Manufactured/Assembled Utilizing Industry Benchmark "Total Quality

Management" (TQM) to Meet or Exceed Military 105 Standards• All Tubing Meets or Exceeds North American ASTM A-513 Specs• Heaviest Screen on the Market - Custom Cut 3/16 inch Diameter Cold

Rolled Steel Mesh Inlay Screen Robotically Welded at Intersections andinto Frame Constructed of Ultra Tough 2" x 2" Thick Steel Tubing

• Nine-Step Powdercoat Process Ensures Superior Durability• Installs in Minutes using Stake Pocket Mounting System Custom

Designed for Each Truck - No Drilling on Most Full-Size Trucks

STK PROGUARD

(31” Toolbox Brackets are available separately)

183

Both a Main Unit and an Install Kit Must be Purchased to Install a Pro Guard cab guard

(See Following Pages)


Tail Bar rear bar allows you tocarry ladders or other long loadswith the Pro Rack or Pro Guard.The Tail Bar rear bar simplydrops into the rear stake pockets, is easily removed anddoes not interfere with openingor closing of the tailgate.

Tool box Brackets allow you toadd your favorite crossbed toolbox. The Tool Box Brackets provide an additional 2" of clearance under the tool box.Especially useful with extra deepboxes. Choose between a 21"tool box bracket or a 31" toolbox bracket depending on yourtruck's specification.

184

Light Bar (Accessory) Brackets allow mounting of moststyles of warning lights or antennas. Most Light Bar

Brackets bolt or clamp right to the Pro Rack and Pro Guard truck racks without drilling.

pro iii ladder rack - r.h. scalesrhscales.com/catalog/racks_truck_van.pdfmore than traditional...

Documents