prior to use of cipherconnect toconnect.cipherlab.com/file/cipherconnect_android_v1.05.pdf ·...
TRANSCRIPT
Download
CipherConnect
to
Android Devices
Prior to Use of CipherConnect
CipherConnect is a COM-to-key utility designed for CipherLab cordless scanners (e.g.156x and166x) to work as an input device for the Android phone and tablet, enabling intensive datacollection via Bluetooth Serial Port connection.
is ready and available via Google Play Store. Go online and look for theapplications:
Follow the instructions below to Download and Update for the mobile devices.
CipherConnect
Note Get the latest update directly from CipherConnect Online Help site at
Note An external storage is required (e.g. SD card) for CipherConnect Demo.
http://connect.cipherlab.com or GooglePlay Store.
Download
and
Update
On the Home screen, press
the [menu] key.
Go to and select
.
All apps
Play Store
Input the username and
password, and then touch
[Sign in].
Touch [Sign in].Touch [Next] to sign in with a
Google account.
Touch [Finish setup]. Touch [Accept] to continue. Type “cipherconnect” in the
text field, and then touch
[Enter].
Touch the icon to browse
the market.
1 2 3 4
5 6 7 8
CipherConnect Demo A demo interface displaying data collection from the scanner
CipherConnect Pro A free version with limited support
A description of the demo
utility is shown. Touch
[Install] to ontinue.c
The
.
n you can also touch
to install the demo utility
CipherConnect DemoTouch [Accept & download]
to download the application.
Once the download process
is , the message
“Installed” is displayed.
completed
9 10 11 12
To uninstall , press the
[menu] key on the Home
screen.
Go to |
and select
.
the apps
Settings Applica-
tions Manage
applications
Tip
Select
from the application
list.
CipherConnect The application info is
displayed.
Touch the highlighted buttons
to execute desired commands.
A description of the
application is shown. Touch
[Install] to .continue
After searching the store with
success, two apps icons show
up.
Touch
to continue.
CipherConnect Pro
After you touch [Install], touch
[Accept & download] to
download the application.
Once the download process
is , the message
“Installed” is displayed.
completed
...
After download the demo
utility
,
.
.
icon can be found in the
application drawer This is a utility
for the purpose of demonstrating
data collection
CipherConnect
Pro CipherConnect Demo
Before using
or
please follow the steps in the
section
,
.
Connection and
Configuration
13 14 15 16
Preparation for Scanner
CipherConnect is ready for use after successful downloads via Google Play Store. Workingwith CipherLab cordless scanners (156x and 166x), it can deliver optimal performance.
Connection
and
Configuration
On the Home screen, press
the [menu] key.
Go to |
and select
.
Settings Wireless &
networks
Bluetooth settings
Touch . When the
check box next to it is ticked,
touch to
find nearby Bluetooth
devices.
Bluetooth
Scan for devices
Select CipherLab scanner
(e.g. 1660).
Input the preset PIN code (if
you have scanned the
barcode above, type ‘0000’
in the field) of the scanner,
and then touch [OK].
Once paired successfully,
the message “Paired but not
connected” is displayed be-
neath the device.
Return to main menu and
go to |
.
Touch
(with check box next to it).
Settings Language
& Keyboard
CipherConnect Pro
1 2 3 4
5 6 7 8
With the check box ticked,
touch
(with “settings” message
beneath) to configure
settings.
CipherConnect ProTouch [OK] in the
dialog box to confirm the
usage of
as the input method.
Attention
CipherConnect
Pro
The scanner is active at power-on for two minutes by default, waiting for a connectionrequest from the mobile phone. Follow the instructions below for Connection andConfiguration on the mobile device.
3
Configure
CipherConnect
for
Android Devices
Note The mobile platform must be Android 2.1 and above with SPP profile;1660 firmware must be verison 1.33 or later; 1661 firmware must be version 1.04 or later;1662/1664 firmware must be version 1.00 or later;1560/1562 firmware must be verison 1.26 or later; 1564 firmware must be version 1.03 or later.
Note You may use your own preset PIN code with the scanner. Yet, dynamic input of PIN is also supported.Refer to a separate scanner user guide for complete settings.
®
1
2
Turn on the scanner, and wait until the LED indicator becomes flashing blue.
Press the trigger to scan the barcode below to set the output interface as “BT SPP Slave”.
®
Preset PIN <0000>SPP Slave Mode
Select the scanner from the
list.Bluetooth Device
Switch the input method to
.CipherConnect Pro
Touch and hold the input
field “Input barcode”, and
then select [Input method]
from the option.Edit text
On
screen, touch
.
CipherConnect Pro
Setting
Bluetooth Device
Touch
to connect to the
scanner. Once connected,
the message “Connected” is
displayed beneath it.
Bluetooth Device
Status
Once
keyboard is displayed on the
screen, trigger the scanner
to read a testing barcode.
CipherConnect
1412 13
16
...
...
We suggest that you enable
[Auto Connect]. After initial
connection, it can automat-
ically connect to the scanner
upon execution, or resume
connection once connection
error is resolved.
With Transmit Buffer enabled
on the scanner, you can con-
tinue scanning data even
when getting out of range.
Press the [menu] key on the
Home screen, and go to
.
Touch .
All
apps
CipherConnect Demo
9 10 11
Take Receiving Operation for
example. The barcode input
will bring up product details
from the demo database.
Testing Barcodes
for Use with Demo Database
Connection Errors:
The scanner is getting
out of range.
Get back to range ASAP.
The scanner becomes
inactive after standing
by for two minutes at
power-on.
Press the blue key to
wake up the scanner.
The scanner shuts down
after
idling for ten minutes.
Press the [Power] key
to turn it on.
automatically
Error
Error
Error
Action
Action
Action
18
®
®
®
CipherConnect
Demo
Use this utility to e
data .
xperience
how collection works You
are supposed to use your own
data collection utility.
15 17
Tip
To to
.
uch keep the
screen from turning off while the
scanner is connected to
If the
connected scanner gets into sleep
mode is
disconnected and the screen will
enter power saving mode
Stay awake
CipherConnect
CipherConnect,
.
On
screen, touch .
CipherConnect Pro
Stay awake
Check for the
keyboard status.
CipherConnect
See the icon
on the status bar.
CipherConnect
Tip
...
Learn the
icon:
CipherConnect
Indicates the
mobile phone is
connected with the
scanner.
Indicates the
mobile is
connecting to the
scanner.
Indicates the
mobile is
disconnected from
the scanner.
Check if any of the
connection error
conditions is met.
phone
phone
On
screen, touch and hold the
paired device.
Bluetooth settings Touch [Unpair]. The icon on
the status bar becomes
to indicate the
.
CipherConnect
mobile phone
is disconnected from the
scanner
®
Tip
To unpair a device, touch the
on the
screen
Bluetooth settings
CipherConnect Pro .
®
Copyright © 2012
CipherLab Co., Ltd.
CipherConnect
Quick Guide v1.05
Select to
enable
Second language
the language toggling
button of the on screen keyboard- .
Tip
On
screen, touch
.
CipherConnect Pro
Second
language
Select a language option from the
list as the second keyboard
language.
T
to
ouch
configure the delay time
between characters
Inter character delay-
.
Tip
On
screen, touch
.
CipherConnect Pro
Inter character delay-
Select the delay interval ranging
from 0 03 to 0 1 seconds. . .
Select
to reserve more screen
spaces for showing
application data.
Minimize keyboard
Tip
On
screen, touch
.
CipherConnect Pro
Minimize
keyboard
Touch the keyboard icon to
hide two buttons at the
bottom Or touch the
button to
show the on screen keyboard- .
the
.
CipherConnect Pro
When the on screen keyboard
displays touch the keyboard icon
to hide it.
-
,
Touch the graphic icon to toggle
between English and the selected
second keyboard language.