principle – more than 3d printing but additive manufacturing primary questions: how can be one...
DESCRIPTION
For the liquid state of a certain material X, the freezing effect can allow the liquid to solidify. That is, to drop cold droplet on the liquid material, and the liquid solidifies to a solid. Principle – more than 3D Printing but Additive Manufacturing Principle ??? Sheet Liquid Powder Solids Physics, Chemistry, Biology or their combination such as bio-physics, bio- chemistry, physics-chemistry X is not every kind of material but a restricted set of materials Process principle for FR1 (make one layer of solids):TRANSCRIPT
![Page 1: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/1.jpg)
Principle – more than 3D Printing but Additive Manufacturing
Primary questions:
How can be one solid layer formed?
How can two layers be adhered?
Process requirement (functional):
FR1: create one solid layer.
FR2: glue two consecutive layers in the deposit direction (z-axis).
xy
z
![Page 2: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/2.jpg)
Principle – more than 3D Printing but Additive Manufacturing
Process principle for FR1 (make one layer of solids):
PowderLiquid
SheetPowder Air
Solid
Powder-based Liquid-based Sheet-based
Opportunity of innovationFrostSnow
![Page 3: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/3.jpg)
For the liquid state of a certain material X, the freezing effect can allow the liquid to solidify. That is, to drop cold droplet on the liquid material, and the liquid solidifies to a solid.
Principle – more than 3D Printing but Additive Manufacturing
Principle ???
Sheet
Liquid
Powder
Solids
Physics, Chemistry, Biology or their combination such as bio-physics, bio-chemistry, physics-chemistry
X is not every kind of material but a restricted set of materials
Process principle for FR1 (make one layer of solids):
![Page 4: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/4.jpg)
For the liquid state of a certain material X, photo-resistive to UV light, can allow the liquid to solidify. That is, to have a mask such that the materials exposed to UV light will remain as a solid.
Principle – more than 3D Printing but Additive Manufacturing
Principle ???
Sheet
Liquid
Powder
Solids
Physics, Chemistry, Biology or their combination such as bio-physics, bio-chemistry, physics-chemistry
X is not every kind of material but a restricted set of materials
Process principle for FR1 (make one layer of solids):
![Page 5: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/5.jpg)
For the powder state of a certain material Y, there is a physical principle called heat-fusion to bind two particles. However, not all materials are heat-fusible.
Principle – more than 3D Printing but Additive Manufacturing
Principle ???Sheet
Liquid
Powder
Solids
Physics, Chemistry, Biology or their combination such as bio-physics, bio-chemistry, physics-chemistry
Y is not every kind of material but a restricted set of materials
Process principle for FR1 (make one layer of solids):
![Page 6: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/6.jpg)
For the powder state of a certain material Y, there is a physical principle which is like welding with fillers to bind two particles. That is, a bond materials are shot on the layer of the material., and the powers glue to solid. However, not all materials are bondable in this way.
Principle – more than 3D Printing but Additive Manufacturing
Principle ???Sheet
Liquid
Powder
Solids
Physics, Chemistry, Biology or their combination such as bio-physics, bio-chemistry, physics-chemistry
Y is not every kind of material but a restricted set of materials
Process principle for FR1 (make one layer of solids):
![Page 7: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/7.jpg)
For the sheet state of a certain material Z, there is a physical principle the sheet is cut by an energy beam such as laser. As such, a solid can be formed, and then another layer of sheet.
Principle – more than 3D Printing but Additive Manufacturing
Principle ???Sheet
Liquid
Powder
Solids
Physics, Chemistry, Biology or their combination such as bio-physics, bio-chemistry, physics-chemistry
Z is not every kind of material but a restricted set of materials
Process principle for FR1 (make one layer of solids):
![Page 8: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/8.jpg)
For the liquid state of a certain material W, it solidifies when it is put in an environment with the temperature being sufficiently lower than the melting point of the material W, and then W turns to a solid.
Principle – more than 3D Printing but Additive Manufacturing
Principle ???
Sheet
Liquid
Powder
Solids
Physics, Chemistry, Biology or their combination such as bio-physics, bio-chemistry, physics-chemistry
W is not every kind of material but a restricted set of materials
3D Printing
Process principle for FR1 (make one layer of solids):
![Page 9: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/9.jpg)
Principle – more than 3D Printing but Additive Manufacturing
PowderLiquid
SheetPowder Air
Solid
Powder-based Liquid-based Sheet-based
Opportunity of innovationFrostSnow
Process principle for FR2 (glue two layers of materials):
![Page 10: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/10.jpg)
The principle to glue the two layers is the photosensitive effect - i.e., the gluing of the upper layer of liquid to the previous solid layer is completed during the solidification of the upper layer of liquid.
Principle – more than 3D Printing but Additive Manufacturing
Principle ???
Sheet
Liquid
Powder
Solids
Physics, Chemistry, Biology or their combination such as bio-physics, bio-chemistry, physics-chemistry
Liquid
Solid
Liquid
Solid
Process principle for FR2 (glue two layers of solids):
![Page 11: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/11.jpg)
The glue of the liquid layer to the previous solid layer is completed during the solidification process of the upper liquid layer based on the droplet freezing effect.
Principle – more than 3D Printing but Additive Manufacturing
Principle ???
Sheet
Liquid
Powder
Solids
Physics, Chemistry, Biology or their combination such as bio-physics, bio-chemistry, physics-chemistry
Liquid
Solid
Liquid
Solid
Process principle for FR2 (glue two layers of solids):
![Page 12: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/12.jpg)
The principle to glue to layers of the solid is the photo-sensitive effect, that is, during the solidification process of the upper liquid layer, it glues with the previous layer of the solid.
Principle – more than 3D Printing but Additive Manufacturing
Principle ???
Sheet
Liquid
Powder
Solids
Physics, Chemistry, Biology or their combination such as bio-physics, bio-chemistry, physics-chemistry
Liquid
Solid
Liquid
Solid
Process principle for FR2 (glue two layers of solids):
![Page 13: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/13.jpg)
The glue of the upper layer of powers to the previous layer of solid is based on the heat-fusion effect. The process is very much like the welding process.
Principle – more than 3D Printing but Additive Manufacturing
Principle ???Sheet
Liquid
Powder
Solids
Physics, Chemistry, Biology or their combination such as bio-physics, bio-chemistry, physics-chemistry
Powder
Solid
Powder
Solid
Process principle for FR2 (glue two layers of solids):
![Page 14: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/14.jpg)
The gluing of the upper layer of powder to the previous solid layer is based on the effect of bonding material in the powder.
Principle – more than 3D Printing but Additive Manufacturing
Principle ???Sheet
Liquid
Powder
Solids
Physics, Chemistry, Biology or their combination such as bio-physics, bio-chemistry, physics-chemistry
Powder
Solid
Powder
Solid
Process principle for FR2 (glue two layers of solids):
![Page 15: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/15.jpg)
The gluing of the upper layer of the sheet to the previous layer of sheet is through adhesion on the back of the sheet.
Principle – more than 3D Printing but Additive Manufacturing
Principle ???Sheet
Liquid
Powder
Solids
Physics, Chemistry, Biology or their combination such as bio-physics, bio-chemistry, physics-chemistry
Sheet
Solid
Sheet
Solid
Process principle for FR2 (glue two layers of solids):
![Page 16: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/16.jpg)
The gluing of the upper layer of the liquid (molten material) to the previous solid layer is completed during the process of material fusion
Principle – more than 3D Printing but Additive Manufacturing
Principle ???
Sheet
Liquid
Powder
Solids
Physics, Chemistry, Biology or their combination such as bio-physics, bio-chemistry, physics-chemistry
3D Printingor FDM
Liquid
Solid
Liquid
Solid
Process principle for FR2 (glue two layers of solids):
![Page 17: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/17.jpg)
Principle – more than 3D Printing but Additive Manufacturing
Rectification for 3D Printing (in terms of the principle):
3D Printing is a kind of additive manufacturing technology.
The principle of 3D printing is molten material will solidify quickly in a
sufficient low temperature environment.
3D printing directly dispenses molten materials to the object (an initial
platform or solid layer of the materials).3D printing glues two layers of the materials (a previous solid layer and a
layer of liquid in the process of solidification) based on the heat-fusion.
3D printing = Fused Deposition Modeling (FDM) = Fused Filament Fabrication
(FFF) = RP (rapid prototyping).
![Page 18: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/18.jpg)
Analysis: Pros and Cons
Pros of additive manufacturing technology:
1.No need of tooling for making a product, thus most suitable for concept
design and marketing.
2.Capable of making complex internal features, thus most suitable for
tissue engineering.
3.Highly customization, thus most suitable to tissue engineering.
4.Rapid production compared with those that need tooling.
5.Low cost in production compared with those that need tooling.
6.Large design space due to its capability of making complex shape
products.
7.High sustainability.
![Page 19: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/19.jpg)
Analysis: Pros and Cons
Cons of additive manufacturing technology:
1.Poor mechanical property: strength and stiffness.
2.Poor accuracy.
3.Need of post-processing in order to make products more functional.
4.Polymer materials.
![Page 20: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/20.jpg)
Analysis: Pros and Cons
Pros and cons of 3D printing among all the additive manufacturing technologies:
1.Cons: Limited scope of materials that can be used: ABS, PLA.
2.Cons: Poor strength (tension) and stiffness.
3.Pros: simple equipment (due to the principle).
4.Pros: simple maintenance.
![Page 21: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/21.jpg)
3D Bio-plotter
It is 3D printer with special types of materials, that is, biomaterials.
Cleaning for bio-cells.
![Page 22: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/22.jpg)
3D printing system
3D Printing overall function
Heat materials to the molten state
Dispense the molten material
Glue two consecutive layers of the material
Supply materials
Feed materials
Heat materials
Move in the x-axis
Move in the y-axis
Move in the z-axis
![Page 23: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/23.jpg)
3D printing system
The six devices
fulfill the six
functions as
mentioned in the
preceding slide
![Page 24: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/24.jpg)
Future
Feeding the filament more effectively.
Heating the filament of metals, ceramics.
Retracting the molten materials.
6D degrees of freedom (DOF) relative motion between the
nozzle and platform.
Scaffolding and seeding simultaneously.
Bio-inspired tissue reconstruction.
Rational design and control of scaffold for support and drug
release.
![Page 25: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/25.jpg)
Future
6D degrees of freedom (DOF) relative motion between the nozzle and platform
![Page 26: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/26.jpg)
Future
6D degrees of freedom (DOF) relative motion between the nozzle and platform
![Page 27: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/27.jpg)
Future
Scaffolding and seeding simultaneously
![Page 28: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/28.jpg)
Future
Bio-inspired tissue reconstruction
Stem cells and active cells
Scaffold for support and nutrition release
Incubator
Biological true tissue
Direct bio-engineering replacement human tissues on-demand for transplantation.
![Page 29: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/29.jpg)
Future
Rational design and control of scaffolds
On demand tissue repair (chemical and physical requirements of individual patients)
Design scaffolds Seed cells Supply foods Stimulate cells
Scaffold degradation control Food supply adjustment Cell stimulation adjustment
![Page 30: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/30.jpg)
Concluding Remarks
Corrigendum and Position Statement: revisit
3D Printing is not the everything of manufacturing technology but a
manufacturing technology that is
of universal capability in terms of making the shape of product,
agile in terms of readiness of accessibility and availability, and
Suitable to one-kind-of-production (OKP).
Add:
3D Printing is one of the additive manufacturing technologies.
Fused deposition principle, leading to simple equipment set up.
It is most promising in bio manufacturing, including design, fabrication and
control.
![Page 31: Principle – more than 3D Printing but Additive Manufacturing Primary questions: How can be one solid layer formed? How can two layers be adhered? Process](https://reader034.vdocuments.site/reader034/viewer/2022051319/5a4d1b627f8b9ab0599ade64/html5/thumbnails/31.jpg)
End and thank you
Question & comment ?