prime motion & control custom manifold questionaire
TRANSCRIPT
From
Company Name: Date submitted: Contact: Required Dates: Telephone: Quotation: Fax: Prototype: E-mail: Production:
Drawing Title Block Information
Name or Description: _______________________________________________________________________ _________________________________________________________________________________________ _________________________________________________________________________________________ Customer Part No: _________________________________________________________________________
Design Requirements - Check List
1. Hydraulic Circuit
(A) Circuit Parts List ____________________________________________________________(Inc. valve part numbers and manufacturer)
(B) Manifold Boundary ___________________________________________________________(Showing labels & sizes of all port terminations)
(C) Labeled Circuit Valve Ports ____________________________________________________
(D) Max. System Pressure _________________________________________________________
(E) Hydraulic Circuit ______________________________________________________________
(F) Operating Conditions _________________________________________________________
2. Drawing Copy Required
(A) Paper Copy - Size: ____________________________________________________________
(B) Electronic Copy Via Email_______________________________________________________
3. Special Requirements (i.e. lifting Mounts etc.) ________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
NY
Prime Motion & ControlCUSTOM MANIFOLD QUESTIONAIRE
www.primehyd.com.au [email protected] +61 8 9248 4144
Prime Motion & ControlCUSTOM MANIFOLD QUESTIONAIRE
www.primehyd.com.au [email protected] +61 8 9248 4144
General Notes:
1. Manifold assembled with construction plugs, o-rings and orifice plugs unless otherwise noted.2. All testing is to be done by the customer unless otherwise arranged.3. Extra charge for assembly drawings showing valves.
Length0,0
0,0
Wid
th
Face BFace op)Face EFace E Face FFace F
Face CFace C (
Face DFace D
Hie
ght
Face A (Rear)
ValvingV1 : V6 : V2 : V7 :V3 : V8 :V4 : V9 :V5: V10:
MiscellaneousMountings
Lift Points
SAE Ports
M
M
Metric / Imperial
Prime Motion & ControlCUSTOM MANIFOLD QUESTIONAIRE
www.primehyd.com.au [email protected] +61 8 9248 4144
DESIGN INFORMATION:INFLOW AND PRESSURE MAXIMUM ENVELOPE DIMENSIONS
(with valves installed)OPERATING SYSTEM MAX.
litres/min Length mmbar bar Width mm
Height mm
DUTY CYCLE MAXIMUM BLOCK DIMENSIONS
Continuous Days/week Length mmHours/day Width mm
Height mm
Days/week ANY OTHER DESIGN CRITERIA TO NOTEHours/day
Thread type/size
Intermittent
MOUNTING HOLES
None requiredThreaded Through holesEither of abovePreferable locationUnacceptable location
PLATING
None AluminiumAnodizing in : Clear
Gold Black Hard black
MATERIAL INFORMATION:TYPE
6061 Aluminium 7050 Aluminium Ductile Iron S1214 Steel (free mach.) Steel 250 plate (weldable) Steel 350 plate (weldable) 316 Stainless steel Other (please specify)
Ductile and SteelZinc Chromate : Silver
Gold (HMA’s standard) Electroless nickel
QUANTITY INFORMATION:QUANTITIES TO BE QUOTED
ESTIMATED ANNUAL USAGE
ANY ADDITIONAL COMMENTS: